summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)AuthorFilesLines
2009-03-16sh: Add OHCI USB support for SH7786Kuninori Morimoto1-0/+83
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-03-11sh: improve sh7785lcr power off codeMagnus Damm1-0/+3
Improve the sh7785lcr power off implementation to never return. It takes some time before the board is actually powered off, just hang after asking the harware to power down. This removes the serial port garbage printout. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-03-11sh: clkfwk: Add resume from hibernation support.Francesco VIRLINZI1-0/+64
This patch adds PM support to the clock framework. With this, resume from hibernation is properly supported. Signed-off-by: Francesco Virlinzi <francesco.virlinzi@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-03-11sh: clkfwk: add clk_set_parent/clk_get_parentFrancesco VIRLINZI2-0/+30
This patch adds the clk_set_parent/clk_get_parent routines to the sh clock framework. Signed-off-by: Francesco Virlinzi <francesco.virlinzi@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-03-10sh: dma-sh updates for multi IRQ and new SH-4A CPUs.Nobuhiro Iwamatsu9-204/+352
This adds DMA support for newer SH-4A CPUs, particularly SH7763/64/80/85. This also enables multi IRQ support for platforms that have multiple vectors bound to the same IRQ source. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-03-10sh: Generate uImage by default on Urquell board.Paul Mundt1-0/+1
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-03-10sh: Define ARCH_SHMOBILE for SH-Mobile CPUs.Paul Mundt1-0/+7
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-03-10sh: pci-sh7780: fix pci memory address for fixed PMBYoshihiro Shimoda1-2/+2
Fix the problem that cannot work a PCI device when 32-bit physical address mode. Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-03-10sh: sh7785lcr: Updates for fixed PMB.Yoshihiro Shimoda3-2/+1563
Add a new defconfig for SH7785LCR in 32-bit mode, and update the power off code to avoid 29-bit assumptions. Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-03-10sh: Support fixed 32-bit PMB mappings from bootloader.Yoshihiro Shimoda9-17/+104
This provides a method for supporting fixed PMB mappings inherited from the bootloader, as an alternative to the dynamic PMB mapping currently used by the kernel. In the future these methods will be combined. P1/P2 area is handled like a regular 29-bit physical address, and local bus device are assigned P3 area addresses. Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-03-10sh: Show sleep state with Migo-R LEDsMagnus Damm1-0/+9
If CONFIG_PM is set, let Migo-R LEDs show sleep states. D11 will show STATUS0 and D12 PDSTATUS. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-03-10Merge branch 'sh/stable-updates'Paul Mundt1-0/+1
2009-03-10sh: Add media/soc_camera.h to board setup of Renesas AP325RXANobuhiro Iwamatsu1-0/+1
Other compilation errors were revised by commit of "sh: ap325rxa: Revert ov772x support" (08c2f5b4d76f83213e379b12df504269d21c9e7c) but other compilation errors are given. We revert this commit and need to add new header(media/soc_camera.h). This change revises new compilation error. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-03-10Merge branch 'master' of ↵Paul Mundt227-2354/+3217
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6
2009-03-10sh: hibernation supportMagnus Damm9-5/+228
Add Suspend-to-disk / swsusp / CONFIG_HIBERNATION support to the SuperH architecture. To suspend, use "swapon /dev/sda2; echo disk > /sys/power/state" To resume, pass "resume=/dev/sda2" on the kernel command line. The patch "pm: rework includes, remove arch ifdefs V2" is needed to allow the generic swsusp code to build properly. Hibernation is not enabled with this patch though, a patch setting ARCH_HIBERNATION_POSSIBLE will be submitted later. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-03-09Merge branch 'fixes' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq: [CPUFREQ] Add p4-clockmod sysfs-ui removal to feature-removal schedule. Revert "[CPUFREQ] Disable sysfs ui for p4-clockmod."
2009-03-09Revert "[CPUFREQ] Disable sysfs ui for p4-clockmod."Dave Jones1-1/+0
This reverts commit e088e4c9cdb618675874becb91b2fd581ee707e6. Removing the sysfs interface for p4-clockmod was flagged as a regression in bug 12826. Course of action: - Find out the remaining causes of overheating, and fix them if possible. ACPI should be doing the right thing automatically. If it isn't, we need to fix that. - mark p4-clockmod ui as deprecated - try again with the removal in six months. It's not really feasible to printk about the deprecation, because it needs to happen at all the sysfs entry points, which means adding a lot of strcmp("p4-clockmod".. calls to the core, which.. bleuch. Signed-off-by: Dave Jones <davej@redhat.com>
2009-03-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds1-1/+1
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (29 commits) p54: fix race condition in memory management cfg80211: test before subtraction on unsigned iwlwifi: fix error flow in iwl*_pci_probe rt2x00 : more devices to rt73usb.c rt2x00 : more devices to rt2500usb.c bonding: Fix device passed into ->ndo_neigh_setup(). vlan: Fix vlan-in-vlan crashes. net: Fix missing dev->neigh_setup in register_netdevice(). tmspci: fix request_irq race pkt_sched: act_police: Fix a rate estimator test. tg3: Fix 5906 link problems SCTP: change sctp_ctl_sock_init() to try IPv4 if IPv6 fails IPv6: add "disable" module parameter support to ipv6.ko sungem: another error printed one too early aoe: error printed 1 too early net pcmcia: worklimit reaches -1 net: more timeouts that reach -1 net: fix tokenring license dm9601: new vendor/product IDs netlink: invert error code in netlink_set_err() ...
2009-03-09lguest: fix for CONFIG_SPARSE_IRQ=yRusty Russell1-7/+9
Impact: remove lots of lguest boot WARN_ON() when CONFIG_SPARSE_IRQ=y We now need to call irq_to_desc_alloc_cpu() before set_irq_chip_and_handler_name(), but we can't do that from init_IRQ (no kmalloc available). So do it as we use interrupts instead. Also means we only alloc for irqs we use, which was the intent of CONFIG_SPARSE_IRQ anyway. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Cc: Ingo Molnar <mingo@redhat.com>
2009-03-09lguest: fix crash 'unhandled trap 13 at <native_read_msr_safe>'Rusty Russell1-0/+5
Impact: fix lguest boot crash on modern Intel machines The code in early_init_intel does: if (c->x86 > 6 || (c->x86 == 6 && c->x86_model >= 0xd)) { u64 misc_enable; rdmsrl(MSR_IA32_MISC_ENABLE, misc_enable); And that rdmsr faults (not allowed from non-0 PL). We can get around this by mugging the family ID part of the cpuid. 5 seems like a good number. Of course, this is a hack (how very lguest!). We could just indicate that we don't support MSRs, or implement lguest_rdmst. Reported-by: Patrick McHardy <kaber@trash.net> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Tested-by: Patrick McHardy <kaber@trash.net>
2009-03-08Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds10-42/+49
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, pebs: correct qualifier passed to ds_write_config() from ds_request_pebs() x86, bts: remove bad warning x86: add Dell XPS710 reboot quirk x86, math-emu: fix init_fpu for task != current x86: EFI: Back efi_ioremap with init_memory_mapping instead of FIX_MAP x86: fix DMI on EFI
2009-03-08Merge branch 'for-linus' of ↵Linus Torvalds73-1601/+607
git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6: (28 commits) Blackfin arch: SPI_MMC is now mainlined MMC_SPI Blackfin arch: disable legacy /proc/scsi/ support by default Blackfin arch: remove duplicated ANOMALY_05000448 ifdef check Blackfin arch: add stubs for anomalies 447 and 448 Blackfin arch: cleanup bfin_sport.h header and export it to userspace Blackfin arch: fix bug - gdb signull case make trunk kernel panic frequently Blackfin arch: remove spurious dash when dcache is off Blackfin arch: mark init_pda as __init as only __init funcs all it Blackfin arch: fix bug - On bf548-ezkit, ethernet fails to work after wakeup from "mem" Blackfin arch: Random read/write errors are a bad thing Blackfin arch: update default kernel config, select KSZ8893M driver for BF518 Blackfin arch: Fix bug - KGDB single step into the middle of a 4 bytes instruction on bf561 after soft bp is hit Blackfin arch: Fix bug - make ksz8893m driver available when bfin_mac is enabled Blackfin arch: make sure people do not set the kernel load address too high Blackfin arch: fix bug - The SPORT_HYS bit is not set for BF561 0.5 Blackfin arch: update anomaly sheets to match latest public info Blackfin arch: Fix BUG - kernel fails to build in pm.c when allow wakeup fromi standby by GPIO Blackfin arch: PM_BFIN_WAKE_GP: update help Blackfin arch: fix bug - kgdb fails to continue after setting breakpoint on bf561-ezkit kernel with smp patch Blackfin arch: Enable Write Back Cache on all Blackfin Boards ...
2009-03-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6Linus Torvalds2-0/+108
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: ata: add CFA specific identify data words remove stale comment from <linux/hdreg.h> AT91: initialize Compact Flash on AT91SAM9263 cpu ide: add at91_ide driver ide: allow to wrap interrupt handler ide-iops: fix odd-length ATAPI PIO transfers ide: NULL noise: drivers/ide/ide-*.c ide: expiry() returns int, negative expiry() return values won't be noticed
2009-03-08Merge branch 'release' of ↵Linus Torvalds1-4/+3
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: [IA64] fix PCI DMA flag propagation on SN (Altix) with PICs
2009-03-08MIPS: compat: Implement is_compat_task.Ralf Baechle1-0/+7
This is a build fix required after "x86-64: seccomp: fix 32/64 syscall hole" (commit 5b1017404aea6d2e552e991b3fd814d839e9cd67). MIPS doesn't have the issue that was fixed for x86-64 by that patch. This also doesn't solve the N32 issue which is that N32 seccomp processes will be treated as non-compat processes thus only have access to N64 syscalls. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-03-06[IA64] fix PCI DMA flag propagation on SN (Altix) with PICsJeremy Higdon1-4/+3
We recently discovered a problem with passing of DMA attributes on SN systems with the older PIC chips. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Jeremy Higdon <jeremy@sgi.com> Cc: <habeck@sgi.com> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Tony Luck <tony.luck@intel.com>
2009-03-06x86, pebs: correct qualifier passed to ds_write_config() from ds_request_pebs()Markus Metzger1-1/+1
ds_write_config() can write the BTS as well as the PEBS part of the DS config. ds_request_pebs() passes the wrong qualifier, which results in the wrong configuration to be written. Reported-by: Stephane Eranian <eranian@googlemail.com> Signed-off-by: Markus Metzger <markus.t.metzger@intel.com> LKML-Reference: <20090305085721.A22550@sedona.ch.intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-06x86, bts: remove bad warningMarkus Metzger1-1/+0
In case a ptraced task is reaped (while the tracer is still attached), ds_exit_thread() is called before ptrace_exit(). The latter will release the bts_tracer and remove the thread's ds_ctx. The former will WARN() if the context is not NULL. Oleg Nesterov submitted patches that move ptrace_exit() before exit_thread() and thus reverse the order of the above calls. Remove the bad warning. I will add it again when Oleg's changes are in. Signed-off-by: Markus Metzger <markus.t.metzger@intel.com> LKML-Reference: <20090305084954.A22000@sedona.ch.intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-06sh: multiple vectors per irq - sh7720.Paul Mundt1-45/+23
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-03-06sh: multiple vectors per irq - sh7710.Paul Mundt1-48/+21
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-03-06sh: multiple vectors per irq - sh7705.Paul Mundt1-42/+19
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-03-06sh: multiple vectors per irq - sh770x.Paul Mundt1-47/+21
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-03-06sh: multiple vectors per irq - mxg.Paul Mundt1-42/+23
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-03-06sh: multiple vectors per irq - sh7619.Paul Mundt1-22/+12
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-03-06sh: multiple vectors per irq - sh7206.Paul Mundt1-96/+58
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-03-06sh: multiple vectors per irq - sh7201.Paul Mundt1-144/+80
Follow the conversions as per the other subtypes. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-03-06sh: multiple vectors per irq - sh7263.Paul Mundt1-19/+10
Convert over the SH7263 IRQ groups as well. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-03-06sh: multiple vectors per irq - sh7203.Paul Mundt1-140/+73
Follow the conversions as per the other subtypes. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-03-06sh: Restore RTC IRQ setting for SH7763 setup.Nobuhiro Iwamatsu1-0/+1
This was accidentally dropped in the multiple vectors per irq conversion. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-03-06sh: multiple vectors per irq - sh7763Nobuhiro Iwamatsu1-76/+37
Update intc tables and platform data to use one linux irq per maskable interrupt source instead of keeping the one-to-one mapping between vectors and linux irqs. This fixes potential irq masking issues for sh7763 hardware blocks such as RTC/SCIF/DMAC/GETHER/PCIC5/MMCIF/SIM/GPIO/USBF. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-03-06Blackfin arch: SPI_MMC is now mainlined MMC_SPIMichael Hennerich11-170/+78
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-03-06Blackfin arch: disable legacy /proc/scsi/ support by defaultMike Frysinger3-3/+3
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-03-06Blackfin arch: remove duplicated ANOMALY_05000448 ifdef checkMike Frysinger1-4/+2
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-03-06Blackfin arch: add stubs for anomalies 447 and 448Mike Frysinger6-0/+12
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-03-05AT91: initialize Compact Flash on AT91SAM9263 cpuStanislaw Gruszka1-0/+105
Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Cc: Andrew Victor <avictor.za@gmail.com> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Acked-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-05ide: add at91_ide driverStanislaw Gruszka1-0/+3
This is IDE host driver for AT91 (SAM9, CAP9, AT572D940HF) Static Memory Controller with Compact Flash True IDE Mode logic. Driver have to switch 8/16 bit bus width when accessing Task Tile or Data Register. Moreover some extra things need to be done when setting PIO mode. Only PIO mode is used, hardware have no DMA support. If interrupt line is connected through GPIO extra quirk is needed to cope with fake interrupts. Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Cc: Andrew Victor <avictor.za@gmail.com> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-05Blackfin arch: cleanup bfin_sport.h header and export it to userspaceAlon Bar-Lev2-31/+15
Signed-off-by: Alon Bar-Lev <alon.barlev@gmail.com> Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-03-05Blackfin arch: fix bug - gdb signull case make trunk kernel panic frequentlyJie Zhang1-2/+3
Use copy_to_user_page and copy_from_user_page instead of memcpy. copy_to_user_page does cache flush when necessary. Signed-off-by: Jie Zhang <jie.zhang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-03-05Blackfin arch: remove spurious dash when dcache is offMike Frysinger1-3/+3
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-03-05Blackfin arch: mark init_pda as __init as only __init funcs all itMike Frysinger1-1/+1
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-04 09:53:31 +0000