summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)AuthorFilesLines
2011-11-21ARM: restart: only perform setup for restart when soft-restartingRussell King21-23/+33
We only need to set the system up for a soft-restart if we're going to be doing a soft-restart. Provide a new function (soft_restart()) which does the setup and final call for this, and make platforms use it. Eliminate the call to setup_restart() from the default handler. This means that platforms arch_reset() function is no longer called with the page tables prepared for a soft-restart, and caches will still be enabled. Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Will Deacon <will.deacon@arm.com> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Viresh Kumar <viresh.kumar@st.com> Acked-by: Krzysztof Ha■asa <khc@pm.waw.pl> Acked-by: Paul Mundt <lethal@linux-sh.org> Acked-by: Richard Purdie <richard.purdie@linuxfoundation.org> Acked-by: Wan ZongShun <mcuos.com@gmail.com> Acked-by: Eric Miao <eric.y.miao@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-11-10ARM: restart: remove argument to setup_mm_for_reboot()Russell King4-6/+6
setup_mm_for_reboot() doesn't make use of its argument, so remove it. Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Will Deacon <will.deacon@arm.com> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-11-10ARM: restart: move reboot failure handing into machine_restart()Russell King1-11/+9
Move the failure to reboot into machine_restart() to always catch this condition, even if a platform decides to hook the restarting via arm_pm_restart(). Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Will Deacon <will.deacon@arm.com> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-11-10ARM: restart: add default restart modes for PXA mioa701, spitz and tosaRussell King3-0/+5
Add a default restart mode to reflect the hard-coded restart mode found in these files. Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Will Deacon <will.deacon@arm.com> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-11-10ARM: restart: allow platforms more flexibility specifying restart modeRussell King4-8/+8
Change 'soft_reboot' into a more generic 'restart_mode' variable, allowing the default restart mode to be specified. Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Will Deacon <will.deacon@arm.com> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-11-10ARM: restart: add restart hook to machine_desc recordRussell King2-0/+4
Add a restart hook to the machine_desc record so we don't have to populate all platforms with init_early methods to initialize the arm_pm_restart function pointer. Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Will Deacon <will.deacon@arm.com> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-11-07Merge branch 'fixes' of ↵Linus Torvalds41-401/+344
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (31 commits) ARM: OMAP: Fix export.h or module.h includes ARM: OMAP: omap_device: Include linux/export.h ARM: OMAP2: Fix H4 matrix keyboard warning ARM: OMAP1: Remove unused omap-alsa.h ARM: OMAP1: Fix warnings about enabling 32 KiHz timer ARM: OMAP2+: timer: Remove omap_device_pm_latency ARM: OMAP2+: clock data: Remove redundant timer clkdev ARM: OMAP: Devkit8000: Remove double omap_mux_init_gpio ARM: OMAP: usb: musb: OMAP: Delete unused function MAINTAINERS: Update linux-omap git repository ARM: OMAP: change get_context_loss_count ret value to int ARM: OMAP4: hsmmc: configure SDMMC1_DR0 properly ARM: OMAP4: hsmmc: Fix Pbias configuration on regulator OFF ARM: OMAP3: hwmod: fix variant registration and remove SmartReflex from common list ARM: OMAP: I2C: Fix omap_register_i2c_bus() return value on success ARM: OMAP: dmtimer: Include linux/module.h ARM: OMAP2+: l3-noc: Include linux/module.h ARM: OMAP2+: devices: Fixes for McPDM ARM: OMAP: Fix errors and warnings when building for one board ARM: OMAP3: PM: restrict erratum i443 handling to OMAP3430 only ...
2011-11-07Merge branch 'fixes-modulesplit' into fixesTony Lindgren1299-20615/+26845
2011-11-07ARM: OMAP: Fix export.h or module.h includesTony Lindgren4-0/+4
Commit 32aaeffbd4a7457bf2f7448b33b5946ff2a960eb (Merge branch 'modsplit-Oct31_2011'...) caused some build errors. Fix these and make sure we always have export.h or module.h included for MODULE_ and EXPORT_SYMBOL users: $ grep -rl ^MODULE_ arch/arm/*omap*/*.c | xargs \ grep -L linux/module.h arch/arm/mach-omap2/dsp.c arch/arm/mach-omap2/mailbox.c arch/arm/mach-omap2/omap-iommu.c arch/arm/mach-omap2/smartreflex.c Also check we either have export.h or module.h included for the files exporting symbols: $ grep -rl EXPORT_SYMBOL arch/arm/*omap*/*.c | xargs \ grep -L linux/export.h | xargs grep -L linux/module.h Cc: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-11-07ARM: OMAP: omap_device: Include linux/export.hAxel Lin1-0/+1
Include linux/export.h to fix below build warning: CC arch/arm/plat-omap/omap_device.o arch/arm/plat-omap/omap_device.c:1055: warning: data definition has no type or storage class arch/arm/plat-omap/omap_device.c:1055: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL' arch/arm/plat-omap/omap_device.c:1055: warning: parameter names (without types) in function declaration Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-11-07arm: Add export.h to recently added files for EXPORT_SYMBOLPaul Gortmaker2-0/+2
These files didn't exist at the time of the module.h split, and so were not fixed by the commits on that baseline. Since they use the EXPORT_SYMBOL and/or THIS_MODULE macros, they will need the new export.h file included that provides them. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-11-07Merge branch 'release' of ↵Linus Torvalds7-131/+196
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: cpuidle: Single/Global registration of idle states cpuidle: Split cpuidle_state structure and move per-cpu statistics fields cpuidle: Remove CPUIDLE_FLAG_IGNORE and dev->prepare() cpuidle: Move dev->last_residency update to driver enter routine; remove dev->last_state ACPI: Fix CONFIG_ACPI_DOCK=n compiler warning ACPI: Export FADT pm_profile integer value to userspace thermal: Prevent polling from happening during system suspend ACPI: Drop ACPI_NO_HARDWARE_INIT ACPI atomicio: Convert width in bits to bytes in __acpi_ioremap_fast() PNPACPI: Simplify disabled resource registration ACPI: Fix possible recursive locking in hwregs.c ACPI: use kstrdup() mrst pmu: update comment tools/power turbostat: less verbose debugging
2011-11-07Merge git://git.infradead.org/mtd-2.6Linus Torvalds43-184/+104
* git://git.infradead.org/mtd-2.6: (226 commits) mtd: tests: annotate as DANGEROUS in Kconfig mtd: tests: don't use mtd0 as a default mtd: clean up usage of MTD_DOCPROBE_ADDRESS jffs2: add compr=lzo and compr=zlib options jffs2: implement mount option parsing and compression overriding mtd: nand: initialize ops.mode mtd: provide an alias for the redboot module name mtd: m25p80: don't probe device which has status of 'disabled' mtd: nand_h1900 never worked mtd: Add DiskOnChip G3 support mtd: m25p80: add EON flash EN25Q32B into spi flash id table mtd: mark block device queue as non-rotational mtd: r852: make r852_pm_ops static mtd: m25p80: add support for at25df321a spi data flash mtd: mxc_nand: preset_v1_v2: unlock all NAND flash blocks mtd: nand: switch `check_pattern()' to standard `memcmp()' mtd: nand: invalidate cache on unaligned reads mtd: nand: do not scan bad blocks with NAND_BBT_NO_OOB set mtd: nand: wait to set BBT version mtd: nand: scrub BBT on ECC errors ... Fix up trivial conflicts: - arch/arm/mach-at91/board-usb-a9260.c Merged into board-usb-a926x.c - drivers/mtd/maps/lantiq-flash.c add_mtd_partitions -> mtd_device_register vs changed to use mtd_device_parse_register.
2011-11-06Merge branch 'upstream/jump-label-noearly' of ↵Linus Torvalds3-34/+45
git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen * 'upstream/jump-label-noearly' of git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen: jump-label: initialize jump-label subsystem much earlier x86/jump_label: add arch_jump_label_transform_static() s390/jump-label: add arch_jump_label_transform_static() jump_label: add arch_jump_label_transform_static() to optimise non-live code updates sparc/jump_label: drop arch_jump_label_text_poke_early() x86/jump_label: drop arch_jump_label_text_poke_early() jump_label: if a key has already been initialized, don't nop it out stop_machine: make stop_machine safe and efficient to call early jump_label: use proper atomic_t initializer Conflicts: - arch/x86/kernel/jump_label.c Added __init_or_module to arch_jump_label_text_poke_early vs removal of that function entirely - kernel/stop_machine.c same patch ("stop_machine: make stop_machine safe and efficient to call early") merged twice, with whitespace fix in one version
2011-11-06Merge branch 'upstream/xen-settime' of ↵Linus Torvalds4-1/+25
git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen * 'upstream/xen-settime' of git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen: xen/dom0: set wallclock time in Xen xen: add dom0_op hypercall xen/acpi: Domain0 acpi parser related platform hypercall
2011-11-06Merge branch 'modsplit-Oct31_2011' of ↵Linus Torvalds423-172/+388
git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux * 'modsplit-Oct31_2011' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: (230 commits) Revert "tracing: Include module.h in define_trace.h" irq: don't put module.h into irq.h for tracking irqgen modules. bluetooth: macroize two small inlines to avoid module.h ip_vs.h: fix implicit use of module_get/module_put from module.h nf_conntrack.h: fix up fallout from implicit moduleparam.h presence include: replace linux/module.h with "struct module" wherever possible include: convert various register fcns to macros to avoid include chaining crypto.h: remove unused crypto_tfm_alg_modname() inline uwb.h: fix implicit use of asm/page.h for PAGE_SIZE pm_runtime.h: explicitly requires notifier.h linux/dmaengine.h: fix implicit use of bitmap.h and asm/page.h miscdevice.h: fix up implicit use of lists and types stop_machine.h: fix implicit use of smp.h for smp_processor_id of: fix implicit use of errno.h in include/linux/of.h of_platform.h: delete needless include <linux/module.h> acpi: remove module.h include from platform/aclinux.h miscdevice.h: delete unnecessary inclusion of module.h device_cgroup.h: delete needless include <linux/module.h> net: sch_generic remove redundant use of <linux/module.h> net: inet_timewait_sock doesnt need <linux/module.h> ... Fix up trivial conflicts (other header files, and removal of the ab3550 mfd driver) in - drivers/media/dvb/frontends/dibx000_common.c - drivers/media/video/{mt9m111.c,ov6650.c} - drivers/mfd/ab3550-core.c - include/linux/dmaengine.h
2011-11-06Merge branches 'acpi', 'idle', 'mrst-pmu' and 'pm-tools' into nextLen Brown7-131/+196
2011-11-06Merge branch 'trivial' of ↵Linus Torvalds17-158/+1
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild * 'trivial' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: scsi: drop unused Kconfig symbol pci: drop unused Kconfig symbol stmmac: drop unused Kconfig symbol x86: drop unused Kconfig symbol powerpc: drop unused Kconfig symbols powerpc: 40x: drop unused Kconfig symbol mips: drop unused Kconfig symbols openrisc: drop unused Kconfig symbols arm: at91: drop unused Kconfig symbol samples: drop unused Kconfig symbol m32r: drop unused Kconfig symbol score: drop unused Kconfig symbols sh: drop unused Kconfig symbol um: drop unused Kconfig symbol sparc: drop unused Kconfig symbol alpha: drop unused Kconfig symbol Fix up trivial conflict in drivers/net/ethernet/stmicro/stmmac/Kconfig as per Michal: the STMMAC_DUAL_MAC config variable is still unused and should be deleted.
2011-11-06Merge branch 'stable/vmalloc-3.2' of ↵Linus Torvalds4-99/+1
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen * 'stable/vmalloc-3.2' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: net: xen-netback: use API provided by xenbus module to map rings block: xen-blkback: use API provided by xenbus module to map rings xen: use generic functions instead of xen_{alloc, free}_vm_area()
2011-11-06cpuidle: Single/Global registration of idle statesDeepthi Dharwar6-87/+127
This patch makes the cpuidle_states structure global (single copy) instead of per-cpu. The statistics needed on per-cpu basis by the governor are kept per-cpu. This simplifies the cpuidle subsystem as state registration is done by single cpu only. Having single copy of cpuidle_states saves memory. Rare case of asymmetric C-states can be handled within the cpuidle driver and architectures such as POWER do not have asymmetric C-states. Having single/global registration of all the idle states, dynamic C-state transitions on x86 are handled by the boot cpu. Here, the boot cpu would disable all the devices, re-populate the states and later enable all the devices, irrespective of the cpu that would receive the notification first. Reference: https://lkml.org/lkml/2011/4/25/83 Signed-off-by: Deepthi Dharwar <deepthi@linux.vnet.ibm.com> Signed-off-by: Trinabh Gupta <g.trinabh@gmail.com> Tested-by: Jean Pihet <j-pihet@ti.com> Reviewed-by: Kevin Hilman <khilman@ti.com> Acked-by: Arjan van de Ven <arjan@linux.intel.com> Acked-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Len Brown <len.brown@intel.com>
2011-11-06cpuidle: Split cpuidle_state structure and move per-cpu statistics fieldsDeepthi Dharwar2-8/+10
This is the first step towards global registration of cpuidle states. The statistics used primarily by the governor are per-cpu and have to be split from rest of the fields inside cpuidle_state, which would be made global i.e. single copy. The driver_data field is also per-cpu and moved. Signed-off-by: Deepthi Dharwar <deepthi@linux.vnet.ibm.com> Signed-off-by: Trinabh Gupta <g.trinabh@gmail.com> Tested-by: Jean Pihet <j-pihet@ti.com> Reviewed-by: Kevin Hilman <khilman@ti.com> Acked-by: Arjan van de Ven <arjan@linux.intel.com> Acked-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Len Brown <len.brown@intel.com>
2011-11-06cpuidle: Move dev->last_residency update to driver enter routine; remove ↵Deepthi Dharwar6-47/+70
dev->last_state Cpuidle governor only suggests the state to enter using the governor->select() interface, but allows the low level driver to override the recommended state. The actual entered state may be different because of software or hardware demotion. Software demotion is done by the back-end cpuidle driver and can be accounted correctly. Current cpuidle code uses last_state field to capture the actual state entered and based on that updates the statistics for the state entered. Ideally the driver enter routine should update the counters, and it should return the state actually entered rather than the time spent there. The generic cpuidle code should simply handle where the counters live in the sysfs namespace, not updating the counters. Reference: https://lkml.org/lkml/2011/3/25/52 Signed-off-by: Deepthi Dharwar <deepthi@linux.vnet.ibm.com> Signed-off-by: Trinabh Gupta <g.trinabh@gmail.com> Tested-by: Jean Pihet <j-pihet@ti.com> Reviewed-by: Kevin Hilman <khilman@ti.com> Acked-by: Arjan van de Ven <arjan@linux.intel.com> Acked-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Len Brown <len.brown@intel.com>
2011-11-06Merge branch 'rmobile-latest' of git://github.com/pmundt/linux-shLinus Torvalds14-197/+1062
* 'rmobile-latest' of git://github.com/pmundt/linux-sh: (21 commits) ARM: mach-shmobile: ag5evm needs CONFIG_I2C ARM: mach-shmobile: sh73a0 and AG5EVM PINT support ARM: mach-shmobile: Add support for PINT though INTC macros ARM: mach-shmobile: SDHI0 GPIO hotplug for AG5EVM ARM: mach-shmobile: Use common INTC IRQ code on sh73a0 ARM: mach-shmobile: Use common INTC IRQ code on sh7372 ARM: mach-shmobile: Use common INTC IRQ code on sh7377 ARM: mach-shmobile: Use common INTC IRQ code on sh7367 ARM: mach-shmobile: sh73a0 GPIO IRQ support ARM: sh7372 ap4evb NOR Flash USB boot fix ARM: mach-shmobile: sh7372 Mackerel NOR Flash USB boot fix sh: intc: Allow triggering on both edges for ARM SoCs ARM: mach-shmobile: Break out INTC IRQ code ARM: mach-shmobile: Kota2 SDHI0 and SDHI1 support ARM: mach-shmobile: Kota2 SCIFA4 and SCIFB support ARM: mach-shmobile: Kota2 MMCIF support ARM: mach-shmobile: Kota2 GPIO LEDs support ARM: mach-shmobile: Kota2 GPIO Keys support ARM: mach-shmobile: Kota2 KEYSC support ARM: mach-shmobile: Kota2 SCIFA2 and SMSC911X support ...
2011-11-06Merge branch 'next' of ↵Linus Torvalds169-1327/+8416
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (106 commits) powerpc/p3060qds: Add support for P3060QDS board powerpc/83xx: Add shutdown request support to MCU handling on MPC8349 MITX powerpc/85xx: Make kexec to interate over online cpus powerpc/fsl_booke: Fix comment in head_fsl_booke.S powerpc/85xx: issue 15 EOI after core reset for FSL CoreNet devices powerpc/8xxx: Fix interrupt handling in MPC8xxx GPIO driver powerpc/85xx: Add 'fsl,pq3-gpio' compatiable for GPIO driver powerpc/86xx: Correct Gianfar support for GE boards powerpc/cpm: Clear muram before it is in use. drivers/virt: add ioctl for 32-bit compat on 64-bit to fsl-hv-manager powerpc/fsl_msi: add support for "msi-address-64" property powerpc/85xx: Setup secondary cores PIR with hard SMP id powerpc/fsl-booke: Fix settlbcam for 64-bit powerpc/85xx: Adding DCSR node to dtsi device trees powerpc/85xx: clean up FPGA device tree nodes for Freecsale QorIQ boards powerpc/85xx: fix PHYS_64BIT selection for P1022DS powerpc/fsl-booke: Fix setup_initial_memory_limit to not blindly map powerpc: respect mem= setting for early memory limit setup powerpc: Update corenet64_smp_defconfig powerpc: Update mpc85xx/corenet 32-bit defconfigs ... Fix up trivial conflicts in: - arch/powerpc/configs/40x/hcu4_defconfig removed stale file, edited elsewhere - arch/powerpc/include/asm/udbg.h, arch/powerpc/kernel/udbg.c: added opal and gelic drivers vs added ePAPR driver - drivers/tty/serial/8250.c moved UPIO_TSI to powerpc vs removed UPIO_DWAPB support
2011-11-06Merge branch 'fixes' of ↵Linus Torvalds5-5/+4
http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm * 'fixes' of http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm: ARM: PXA: fix includes in pxa2xx_cm_x2xx PCMCIA driver ARM: PXA: fix gpio-pxa.h build errors ARM: 7142/1: davinci: mark GPIO implementation complex ARM: 7134/1: Revert "EXYNOS4: Fix routing timer interrupt to offline CPU" ARM: PXA: eseries: fix eseries_register_clks section mismatch warning ARM: PXA: fix lubbock PCMCIA driver build error
2011-11-06mrst pmu: update commentLen Brown1-1/+1
referenced MeeGo, in particular, but really means Linux, in general. Signed-off-by: Len Brown <len.brown@intel.com>
2011-11-06ARM: EXYNOS: Add ARCH_EXYNOS and reorganize arch/arm/mach-exynosKukjin Kim76-81/+106
The arch/arm/mach-exynos4 directory (CONFIG_ARCH_EXYNOS4) has made for plaforms based on EXYNOS4 SoCs. But since upcoming Samsung's SoCs such as EXYNOS5 (ARM Cortex A15) can reuse most codes in current mach-exynos4, one mach-exynos directory will be used for them. This patch changes to CONFIG_ARCH_EXYNOS (arch/arm/mach-exynos) but keeps original CONFIG_ARCH_EXYNOS4 in mach-exynos/Kconfig to avoid changing in driver side. Cc: Arnd Bergmann <arnd@arndb.de> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-11-06ARM: EXYNOS4: convert MCT to percpu interrupt APIMarc Zyngier1-13/+27
MCT recently gained per cpu interrupts, and missed the fact that ARM has moved to a genirq based implementation. This patch converts the driver to the new API. Boot tested on Origen. Cc: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-11-06ARM: SAMSUNG: Add clk enable/disable of pwmJoonyoung Shim1-0/+7
PWM timers use pclk("timers" clk) as parent clk. If this pclk is the disabled state when PWM driver is probed, then it causes wrong read and write operation about registers of PWM. Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-11-06ARM: SAMSUNG: Fix compile error due to kfreeJonghwan Choi1-0/+1
Fix following build error. arch/arm/plat-samsung/dev-backlight.c: In function 'samsung_bl_set': arch/arm/plat-samsung/dev-backlight.c:145: error: implicit declaration of function 'kfree' Signed-off-by: Jonghwan Choi <jhbird.choi@gmail.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-11-05Merge branch 'next/devel2' of git://git.linaro.org/people/arnd/arm-socLinus Torvalds22-141/+615
* 'next/devel2' of git://git.linaro.org/people/arnd/arm-soc: (30 commits) ARM: mmp: register internal sram bank ARM: mmp: register audio sram bank ARM: mmp: add sram allocator gpio/samsung: Complain loudly if we don't know the SoC ARM: S3C64XX: Fix SoC identification for S3C64xx devices ARM: S3C2443: Remove redundant s3c_register_clocks call for init_clocks ARM: S3C24XX: Add devname for hsmmc1 pclk ARM: S3C24XX: use clk_get_rate to init fclk in common_setup_clocks ARM: S3C2443: Accommodate cpufreq frequency scheme in armdiv ARM: S3C2443: handle unset armdiv values gracefully ARM: S3C2443: Add get_rate operation for clk_armdiv ARM: S3C2416: Add comment describing the armdiv/armclk ARM: S3C2443: Move clk_arm and clk_armdiv to common code ARM: S3C24XX: Add infrastructure to transmit armdiv to common code ARM: S3C2416: Add armdiv_mask constant ARM: EXYNOS4: Add support for M-5MOLS camera on Nuri board ARM: EXYNOS4: Enable MFC on ORIGEN ARM: SAMSUNG: Add support s3c2416-adc for S3C2416/S3C2450 ARM: SAMSUNG: Add support s3c2443-adc for S3C2443 ARM: SAMSUNG: Allow overriding of adc device name for S3C24XX ...
2011-11-05Merge branch 'next/cleanup3' of git://git.linaro.org/people/arnd/arm-socLinus Torvalds218-5961/+5335
* 'next/cleanup3' of git://git.linaro.org/people/arnd/arm-soc: (79 commits) ARM: SAMSUNG: Move fimc plat. device from board files to plat-samsung ARM: SAMSUNG: Cleanup resources by using macro ARM: SAMSUNG: Cleanup plat-samsung/devs.c and devs.h ARM: S5P: To merge devs.c files to one devs.c ARM: S3C64XX: To merge devs.c files to one devs.c ARM: S3C24XX: To merge s3c24xx devs.c files to one devs.c ARM: S5P64X0: Add Power Management support ARM: S5P: Make the sleep code common for S5P series SoCs ARM: S5P: Make the common S5P PM code conditionally compile ARM: SAMSUNG: Move S5P header files to plat-samsung ARM: SAMSUNG: Move S3C24XX header files to plat-samsung ARM: SAMSUNG: Moving each SoC support header files ARM: SAMSUNG: Consolidate plat/pll.h ARM: SAMSUNG: Consolidate plat/pwm-clock.h ARM: SAMSUNG: Cleanup mach/clkdev.h ARM: SAMSUNG: remove sdhci default configuration setup platform helper ARM: EXYNOS4: Add FIMC device on SMDKV310 board ARM: EXYNOS4: Add header file protection macros ARM: EXYNOS4: Add usb ehci device to the SMDKV310 ARM: S3C2443: Add hsspi-clock from pclk and rename S3C2443 hsspi sclk ... Fix up conflicts in - arch/arm/mach-exynos4/{Kconfig,clock.c} ARM_CPU_SUSPEND, various random device tables (gah!) - drivers/gpio/Makefile sa1100 gpio added, samsung gpio drivers merged
2011-11-05ARM: PXA: fix gpio-pxa.h build errorsRussell King1-1/+1
A mismerge in 43872fa (Merge branch 'depends/rmk/gpio' into next/fixes) causes these build errors: In file included from arch/arm/mach-pxa/include/mach/gpio.h:30, from arch/arm/include/asm/gpio.h:6, from include/linux/gpio.h:31, from arch/arm/mach-pxa/generic.c:20: arch/arm/mach-pxa/include/mach/gpio-pxa.h: In function ■__gpio_is_occupied■: arch/arm/mach-pxa/include/mach/gpio-pxa.h:121: error: invalid operands to binary >> (have ■void *■ and ■unsigned int■) arch/arm/mach-pxa/include/mach/gpio-pxa.h:122: error: invalid operands to binary & (have ■void *■ and ■int■) arch/arm/mach-pxa/include/mach/gpio-pxa.h:129: error: invalid operands to binary & (have ■void *■ and ■int■) So fix them. Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-11-05ARM: 7142/1: davinci: mark GPIO implementation complexLinus Walleij1-0/+2
When breaking apart the DaVinci GPIO files I accidentally marked it non-complex while it is indeed complex. Reported-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-11-05ARM: 7134/1: Revert "EXYNOS4: Fix routing timer interrupt to offline CPU"Kukjin Kim1-2/+0
This reverts commit 4bd0fe1c78623062263cf5ae875fd484c5b8256d. This implementation can introduce a problem and 'ARM: SMP: fix per cpu timer setup before the cpu is marked online' patch can solve the cpu_oneline vs. cpu_active problem so that should be reverted. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-11-05ARM: PXA: eseries: fix eseries_register_clks section mismatch warningRussell King2-2/+1
Fix: WARNING: vmlinux.o(.text+0x1a820): Section mismatch in reference from the function eseries_register_clks() to the function .init.text:clkdev_add_table() The function eseries_register_clks() references the function __init clkdev_add_table(). This is often because eseries_register_clks lacks a __init annotation or the annotation of clkdev_add_table is wrong. by adding the __init annotation to eseries_register_clks() - this function is only called from other __init-marked functions. While we're here, mark it static as it's only called from within eseries.c. Acked-by: Eric Miao <eric.y.miao@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-11-05ARM: EXYNOS4: Fix the merge conflictKukjin Kim1-3/+0
The mark of conflict should be removed. This happened at the commit fba9569924e0 ("Merge branch 'next' of git://git.infradead.org/users/vkoul/slave-dma") Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> [ I always check the conflict resolution with "git diff" before I add the result, but I clearly missed that this time, and didn't notice the second conflict in that file after having fixed the first one. Oops, my bad. - Linus ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-11-04ARM: OMAP2: Fix H4 matrix keyboard warningTony Lindgren1-53/+69
Convert to use matrix keyboard to remove the warning "Please update the board to use matrix-keypad driver". Based on similar setup in palmtc.c. Note that this patch is compile tested only because of lack of working hardware. Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-11-04ARM: OMAP1: Remove unused omap-alsa.hJarkko Nikula2-124/+0
There is no use for omap-alsa.h and board-palmz71.c doesn't need it either. Signed-off-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-11-04ARM: OMAP1: Fix warnings about enabling 32 KiHz timerTony Lindgren1-1/+1
Fix "Enable 32kHz OS timer in order to allow sleep states in idle" warning. We are now compiling in bothe MPU timer and 32 KiHz timer, so this warning is only valid when MPU_TIMER is set and OMAP_DM_TIMER is not set. Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-11-04ARM: OMAP2+: timer: Remove omap_device_pm_latencyBenoit Cousson1-11/+1
Remove the structure since a default one is now available. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Kevin Hilman <khilman@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-11-04ARM: OMAP2+: clock data: Remove redundant timer clkdevBenoit Cousson4-47/+0
The commit 318c3e15cd55c73a26ae22a65a8183655b3003f9 added some "fck" clock alias to timer devices that are not needed anymore since hwmod framework will create them automatically. A warning was added to highlight and thus fix the redundancy. [ 0.616424] omap_timer.1: alias fck already exists [ 0.621948] omap_timer.2: alias fck already exists [ 0.627380] omap_timer.3: alias fck already exists [ 0.632781] omap_timer.4: alias fck already exists [ 0.638214] omap_timer.5: alias fck already exists [ 0.643615] omap_timer.6: alias fck already exists [ 0.649078] omap_timer.7: alias fck already exists [ 0.654479] omap_timer.8: alias fck already exists [ 0.659881] omap_timer.9: alias fck already exists [ 0.665283] omap_timer.10: alias fck already exists [ 0.670776] omap_timer.11: alias fck already exists Remove all the clkdev entries for timer fck alias. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Tarun Kanti DebBarma <tarun.kanti@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-11-04ARM: OMAP: Devkit8000: Remove double omap_mux_init_gpioThomas Weber1-1/+0
Remove the init of card detect pin because omap_mux_init_gpio() is called during hsmmc initialization for the write protect and card detect pin. Signed-off-by: Thomas Weber <weber@corscience.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-11-04ARM: OMAP: usb: musb: OMAP: Delete unused functionBjarne Steinsbo1-38/+0
Not in use anymore. Signed-off-by: Bjarne Steinsbo <bsteinsbo@gmail.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-11-04Merge branch 'next' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds33-1762/+1229
* 'next' of git://git.infradead.org/users/vkoul/slave-dma: (63 commits) dmaengine: mid_dma: mask_peripheral_interrupt only when dmac is idle dmaengine/ep93xx_dma: add module.h include pch_dma: Reduce wasting memory pch_dma: Fix suspend issue dma/timberdale: free_irq() on an error path dma: shdma: transfer based runtime PM dmaengine: shdma: protect against the IRQ handler dmaengine i.MX DMA/SDMA: add missing include of linux/module.h dmaengine: delete redundant chan_id and chancnt initialization in dma drivers dmaengine/amba-pl08x: Check txd->llis_va before freeing dma_pool dmaengine/amba-pl08x: Add support for sg len greater than one for slave transfers serial: sh-sci: don't filter on DMA device, use only channel ID ARM: SAMSUNG: Remove Samsung specific enum type for dma direction ASoC: Samsung: Update DMA interface spi/s3c64xx: Merge dma control code spi/s3c64xx: Add support DMA engine API ARM: SAMSUNG: Remove S3C-PL330-DMA driver ARM: S5P64X0: Use generic DMA PL330 driver ARM: S5PC100: Use generic DMA PL330 driver ARM: S5PV210: Use generic DMA PL330 driver ... Fix up fairly trivial conflicts in - arch/arm/mach-exynos4/{Kconfig,clock.c} - arch/arm/mach-s5p64x0/dma.c
2011-11-04ARM: OMAP: change get_context_loss_count ret value to intTomi Valkeinen9-20/+36
get_context_loss_count functions return context loss count as u32, and zero means an error. However, zero is also returned when context has never been lost and could also be returned when the context loss count has wrapped and goes to zero. Change the functions to return an int, with negative value meaning an error. OMAP HSMMC code uses omap_pm_get_dev_context_loss_count(), but as the hsmmc code handles the returned value as an int, with negative value meaning an error, this patch actually fixes hsmmc code also. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Kevin Hilman <khilman@ti.com> Acked-by: Paul Walmsley <paul@pwsan.com> [tony@atomide.com: updated to fix a warning with recent dmtimer changes] Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-11-04ARM: OMAP4: hsmmc: configure SDMMC1_DR0 properlyBalaji T K1-1/+1
Fix the typo, instead it should be SDMMC1 USBC1 is not related to MMC1 I/Os Signed-off-by: Balaji T K <balajitk@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-11-04ARM: OMAP4: hsmmc: Fix Pbias configuration on regulator OFFBalaji T K1-12/+2
MMC1 data line IO's are powered down in before set regulator function. IO's should not be powered ON when regulator is OFF. Keep the IO's in power pown mode after regulator OFF otherwise VMODE_ERROR interrupt is generated due to mismatch in input (regulator) voltage and MMC IO drive voltage. Delete incorrect comments which are not applicable for OMAP4. Signed-off-by: Balaji T K <balajitk@ti.com> Signed-off-by: Kishore Kadiyala <kishore.kadiyala@ti.com> Reported-by: Viswanath Puttagunta <vishp@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-11-04ARM: OMAP3: hwmod: fix variant registration and remove SmartReflex from ↵Paul Walmsley1-2/+2
common list Commit d6504acd2125984c61dce24727dd3842d0144015 ("OMAP2+: hwmod: remove OMAP_CHIP*") tests the inverse condition of what it should be testing for the return value from omap_hwmod_register(). This causes several IP blocks to not be registered on several OMAP3 family devices. Fixing that bug also unmasked another bug, originally reported by Chase Maupin <chase.maupin@ti.com> and then subsequently by Abhilash K V <abhilash.kv@ti.com>, which caused SmartReflex IP blocks to be registered on SoCs that don't support them. Thanks to Russell King - ARM Linux <linux@arm.linux.org.uk> for comments on a previous version of the patch. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Chase Maupin <chase.maupin@ti.com> Cc: Abhilash K V <abhilash.kv@ti.com> Cc: Russell King - ARM Linux <linux@arm.linux.org.uk> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-11-04ARM: OMAP: I2C: Fix omap_register_i2c_bus() return value on successLaurent Pinchart1-1/+1
Commit 4d17aeb1c5b2375769446d13012a98e6d265ec13 ("OMAP: I2C: split device registration and convert OMAP2+ to omap_device") makes omap2_i2c_add_bus() return a pointer to an omap_device instead on success instead of 0. This breaks the omap_register_i2c_bus() ABI and results in the igep0020 board code detecting an I2C bus registration error when there is none. Fix the problem by using PTR_RET() instead of PTR_ERR() in omap2_i2c_add_bus(). Reported-by: Alexander Kinzer <a.kinzer@plusoptix.de> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> [tony@atomide.com: updated to return pdev instead of od] Signed-off-by: Tony Lindgren <tony@atomide.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-19 02:34:20 +0000