summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)AuthorFilesLines
2010-11-08Merge branch 'rmobile-fixes-for-linus' of ↵Linus Torvalds5-3/+153
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6 * 'rmobile-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: mmc: sh_mmcif: Convert extern inline to static inline. ARM: mach-shmobile: Allow GPIO chips to register IRQ mappings. ARM: mach-shmobile: fix sh7372 after a recent clock framework rework ARM: mach-shmobile: include drivers/sh/Kconfig ARM: mach-shmobile: ap4evb: Add HDMI sound support ARM: mach-shmobile: clock-sh7372: Add FSIDIV clock support ARM: shmobile: remove sh_timer_config clk member
2010-11-08Merge branch 'rmobile/core' into rmobile-fixes-for-linusPaul Mundt5-3/+153
2010-11-08Merge branches 'sh/pio-death', 'sh/nommu', 'sh/clkfwk', 'sh/core' and ↵Paul Mundt44-1477/+158
'sh/intc-extension' into sh-fixes-for-linus
2010-11-08sh: make some needlessly global sh7724 clocks staticGuennadi Liakhovetski1-3/+3
These clocks are currently only used inside one .c file and are not declared in any headers, therefore having them global is useless. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-05Merge branch 'kvm-updates/2.6.37' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds7-13/+21
* 'kvm-updates/2.6.37' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: PPC: BookE: Load the lower half of MSR KVM: PPC: BookE: fix sleep with interrupts disabled KVM: PPC: e500: Call kvm_vcpu_uninit() before kvmppc_e500_tlb_uninit(). PPC: KVM: Book E doesn't have __end_interrupts. KVM: x86: Issue smp_call_function_many with preemption disabled KVM: x86: fix information leak to userland KVM: PPC: fix information leak to userland KVM: MMU: fix rmap_remove on non present sptes KVM: Write protect memory after slot swap
2010-11-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tileLinus Torvalds21-69/+103
* git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: arch/tile: mark "hardwall" device as non-seekable asm-generic/stat.h: support 64-bit file time_t for stat() arch/tile: don't allow user code to set the PL via ptrace or signal return arch/tile: correct double syscall restart for nested signals arch/tile: avoid __must_check warning on one strict_strtol check arch/tile: bomb raw_local_irq_ to arch_local_irq_ arch/tile: complete migration to new kmap_atomic scheme
2010-11-05KVM: PPC: BookE: Load the lower half of MSRScott Wood1-1/+1
This was preventing the guest from setting any bits in the hardware MSR which aren't forced on, such as MSR[SPE]. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2010-11-05KVM: PPC: BookE: fix sleep with interrupts disabledScott Wood1-2/+0
It is not legal to call mutex_lock() with interrupts disabled. This will assert with debug checks enabled. If there's a real need to disable interrupts here, it could be done after the mutex is acquired -- but I don't see why it's needed at all. Signed-off-by: Scott Wood <scottwood@freescale.com> Reviewed-by: Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2010-11-05KVM: PPC: e500: Call kvm_vcpu_uninit() before kvmppc_e500_tlb_uninit().Scott Wood1-1/+1
The VCPU uninit calls some TLB functions, and the TLB uninit function frees the memory used by them. Signed-off-by: Scott Wood <scottwood@freescale.com> Acked-by: Liu Yu <yu.liu@freescale.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2010-11-05PPC: KVM: Book E doesn't have __end_interrupts.Scott Wood1-1/+1
Fix an unresolved symbol with CONFIG_KVM_GUEST plus CONFIG_RELOCATABLE on Book E. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2010-11-05KVM: x86: Issue smp_call_function_many with preemption disabledJan Kiszka1-0/+2
smp_call_function_many is specified to be called only with preemption disabled. Fulfill this requirement. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-11-05KVM: x86: fix information leak to userlandVasiliy Kulikov1-0/+6
Structures kvm_vcpu_events, kvm_debugregs, kvm_pit_state2 and kvm_clock_data are copied to userland with some padding and reserved fields unitialized. It leads to leaking of contents of kernel stack memory. We have to initialize them to zero. In patch v1 Jan Kiszka suggested to fill reserved fields with zeros instead of memset'ting the whole struct. It makes sense as these fields are explicitly marked as padding. No more fields need zeroing. KVM-Stable-Tag. Signed-off-by: Vasiliy Kulikov <segooon@gmail.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-11-05KVM: PPC: fix information leak to userlandVasiliy Kulikov1-0/+1
Structure kvm_ppc_pvinfo is copied to userland with flags and pad fields unitialized. It leads to leaking of contents of kernel stack memory. Signed-off-by: Vasiliy Kulikov <segooon@gmail.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-11-05KVM: MMU: fix rmap_remove on non present sptesMarcelo Tosatti1-4/+5
drop_spte should not attempt to rmap_remove a non present shadow pte. This fixes a BUG_ON seen on kvm-autotest. Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Reported-by: Lucas Meneghel Rodrigues <lmr@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-11-05KVM: Write protect memory after slot swapMichael S. Tsirkin1-4/+4
I have observed the following bug trigger: 1. userspace calls GET_DIRTY_LOG 2. kvm_mmu_slot_remove_write_access is called and makes a page ro 3. page fault happens and makes the page writeable fault is logged in the bitmap appropriately 4. kvm_vm_ioctl_get_dirty_log swaps slot pointers a lot of time passes 5. guest writes into the page 6. userspace calls GET_DIRTY_LOG At point (5), bitmap is clean and page is writeable, thus, guest modification of memory is not logged and GET_DIRTY_LOG returns an empty bitmap. The rule is that all pages are either dirty in the current bitmap, or write-protected, which is violated here. It seems that just moving kvm_mmu_slot_remove_write_access down to after the slot pointer swap should fix this bug. KVM-Stable-Tag. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-11-04sh: Simplify phys_addr_mask()/PTE_PHYS_MASK for 29/32-bit.Paul Mundt1-12/+0
Given that __in_29bit_mode() is a constant for the non-PMB case, we can simply use the PMB-facing version of phys_addr_mask() and drop the other variants. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-04sh: nommu: Support building without an uncached mapping.Paul Mundt4-42/+41
Now that nommu selects 32BIT we run in to the situation where SH-2A supports an uncached identity mapping by way of the BSC, while the SH-2 does not. This provides stubs for the PC manglers and tidies up some of the system*.h mess in the process. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-04sh: nommu: use 32-bit phys mode.Paul Mundt5-14/+14
The nommu code has regressed somewhat in that 29BIT gets set for the SH-2/2A configs regardless of the fact that they are really 32BIT sans MMU or PMB. This does a bit of tidying to get nommu properly selecting 32BIT as it was before. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-04sh: mach-se: Fix up SE7206 no ioport build.Paul Mundt1-1/+3
There was a leftover inw() used here that really just wants to be a __raw_readw() instead. Convert it over. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-04ARM: mach-shmobile: Allow GPIO chips to register IRQ mappings.Paul Mundt1-2/+2
As non-PFC chips are added that may support IRQs, pass through to the generic helper. This follows the the SH change. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-03m68k, m68knommu: Do not include linux/hardirq.h in asm/irqflags.hPhilippe De Muyter1-0/+2
Recent changes to header files made kernel compilation for m68k/m68knommu fail with : CC arch/m68knommu/kernel/asm-offsets.s In file included from /archives/linux/git/arch/m68k/include/asm/system.h:2, from include/linux/wait.h:25, from include/linux/mmzone.h:9, from include/linux/gfp.h:4, from include/linux/irq.h:20, from include/asm-generic/hardirq.h:12, from /archives/linux/git/arch/m68k/include/asm/hardirq_no.h:17, from /archives/linux/git/arch/m68k/include/asm/hardirq.h:2, from include/linux/hardirq.h:10, from /archives/linux/git/arch/m68k/include/asm/irqflags.h:5, from include/linux/irqflags.h:15, from include/linux/spinlock.h:53, from include/linux/seqlock.h:29, from include/linux/time.h:8, from include/linux/timex.h:56, from include/linux/sched.h:56, from arch/m68knommu/kernel/asm-offsets.c:12: /archives/linux/git/arch/m68k/include/asm/system_no.h: In function ‘__xchg’: /archives/linux/git/arch/m68k/include/asm/system_no.h:79: error: implicit +declaration of function ‘local_irq_save’ /archives/linux/git/arch/m68k/include/asm/system_no.h:101: error: implicit +declaration of function ‘local_irq_restore’ Fix that Signed-off-by: Philippe De Muyter <phdm@macqel.be> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2010-11-03m68knommu: add back in declaration of do_IRQGreg Ungerer1-0/+1
The cleanup and merge of machdep should not have removed the do_IRQ declaration. It is needed by the 68328 based targets. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2010-11-02ARM: mach-shmobile: fix sh7372 after a recent clock framework reworkGuennadi Liakhovetski1-0/+1
The updated sh clock framework has introduced a .nr_freqs element of struct clk, which has to be initialised with the number of possible frequencies. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-01arch/tile: mark "hardwall" device as non-seekableChris Metcalf1-1/+1
Arnd's recent patch series tagged this device with noop_llseek, conservatively. In fact, it should be no_llseek, which we arrange for by opening the device with nonseekable_open(). Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2010-11-01asm-generic/stat.h: support 64-bit file time_t for stat()Chris Metcalf3-5/+9
The existing asm-generic/stat.h specifies st_mtime, etc., as a 32-value, and works well for 32-bit architectures (currently microblaze, score, and 32-bit tile). However, for 64-bit architectures it isn't sufficient to return 32 bits of time_t; this isn't good insurance against the 2037 rollover. (It also makes glibc support less convenient, since we can't use glibc's handy STAT_IS_KERNEL_STAT mode.) This change extends the two "timespec" fields for each of the three atime, mtime, and ctime fields from "int" to "long". As a result, on 32-bit platforms nothing changes, and 64-bit platforms will now work as expected. The only wrinkle is 32-bit userspace under 64-bit kernels taking advantage of COMPAT mode. For these, we leave the "struct stat64" definitions with the "int" versions of the time_t and nsec fields, so that architectures can implement compat_sys_stat64() and friends with sys_stat64(), etc., and get the expected 32-bit structure layout. This requires a field-by-field copy in the kernel, implemented by the code guarded under __ARCH_WANT_STAT64. This does mean that the shape of the "struct stat" and "struct stat64" structures is different on a 64-bit kernel, but only one of the two structures should ever be used by any given process: "struct stat" is meant for 64-bit userspace only, and "struct stat64" for 32-bit userspace only. (On a 32-bit kernel the two structures continue to have the same shape, since "long" is 32 bits.) The alternative is keeping the two structures the same shape on 64-bit kernels, which means a 64-bit time_t in "struct stat64" for 32-bit processes. This is a little unnatural since 32-bit userspace can't do anything with 64 bits of time_t information, since time_t is just "long", not "int64_t"; and in any case 32-bit userspace might expect to be running under a 32-bit kernel, which can't provide the high 32 bits anyway. In the case of a 32-bit kernel we'd then be extending the kernel's 32-bit time_t to 64 bits, then truncating it back to 32 bits again in userspace, for no particular reason. And, as mentioned above, if we have 64-bit time_t for 32-bit processes we can't easily use glibc's STAT_IS_KERNEL_STAT, since glibc's stat structure requires an embedded "struct timespec", which is a pair of "long" (32-bit) values in a 32-bit userspace. "Inventive" solutions are possible, but are pretty hacky. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2010-11-01arch/tile: don't allow user code to set the PL via ptrace or signal returnChris Metcalf2-18/+24
The kernel was allowing any component of the pt_regs to be updated either by signal handlers writing to the stack, or by processes writing via PTRACE_POKEUSR or PTRACE_SETREGS, which meant they could set their PL up from 0 to 1 and get access to kernel code and data (or, in practice, cause a kernel panic). We now always reset the ex1 field, allowing the user to set their ICS bit only. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2010-11-01arch/tile: correct double syscall restart for nested signalsChris Metcalf1-1/+5
This change is modelled on similar fixes for other architectures. The pt_regs "faultnum" member is set to the trap (fault) number that caused us to enter the kernel, and is INT_SWINT_1 for the syscall software interrupt. We already supported a pseudo value, INT_SWINT_1_SIGRETURN, that we used for the rt_sigreturn syscall; it avoided the case where one signal was handled, then we "tail-called" to another handler. This change avoids the similar case where we start to call one handler, then are preempted into another handler when we start trying to run the first handler. We clear ->faultnum after calling handle_signal(), and to be paranoid also in the case where there was no signal to deliver. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2010-11-01arch/tile: avoid __must_check warning on one strict_strtol checkChris Metcalf1-2/+6
For the "initfree" boot argument it's not that big a deal, but to avoid warnings in the code, we check for a valid value before allowing the specified argument to override the kernel default. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2010-11-01arch/tile: bomb raw_local_irq_ to arch_local_irq_Chris Metcalf8-18/+18
This completes the tile migration to the new naming scheme for the architecture-specific irq management code. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2010-11-01arch/tile: complete migration to new kmap_atomic schemeChris Metcalf7-24/+40
This change makes KM_TYPE_NR independent of the actual deprecated list of km_type values, which are no longer used in tile code anywhere. For now we leave it set to 8, allowing that many nested mappings, and thus reserving 32MB of address space. A few remaining places using KM_* values were cleaned up as well. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2010-11-01ARM: mach-shmobile: include drivers/sh/KconfigPaul Mundt1-0/+2
Many of the config bit are presently duplicated between the platforms, which will gradually cleaned up through centralization. For the moment we expose some new INTC features through drivers/sh/Kconfig that the ARM platforms presently don't enable, so make it generally available. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-01Merge branch 'next-spi' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds1-1/+1
* 'next-spi' of git://git.secretlab.ca/git/linux-2.6: spi/pl022: fix erroneous platform data in U300 spi: fixed odd static string conventions in core code spi/bfin_spi: only request GPIO on first load spi/bfin_spi: handle error/status changes after data interrupts spi: enable spi_board_info to be registered after spi_master
2010-11-01spi/pl022: fix erroneous platform data in U300Linus Walleij1-1/+1
This fixes an erroneous use of LSB first in the U300 machine, the PL022 used in U300 is a standard ARM core that doesn't support this bit so it should never have been set. Cc: Kevin Wells <wellsk40@gmail.com>OA Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-10-31ARM: mach-shmobile: ap4evb: Add HDMI sound supportKuninori Morimoto1-1/+45
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-31ARM: mach-shmobile: clock-sh7372: Add FSIDIV clock supportKuninori Morimoto2-0/+103
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-30Merge branches 'perf-fixes-for-linus' and 'x86-fixes-for-linus' of ↵Linus Torvalds5-56/+43
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: jump label: Add work around to i386 gcc asm goto bug x86, ftrace: Use safe noops, drop trap test jump_label: Fix unaligned traps on sparc. jump label: Make arch_jump_label_text_poke_early() optional jump label: Fix error with preempt disable holding mutex oprofile: Remove deprecated use of flush_scheduled_work() oprofile: Fix the hang while taking the cpu offline jump label: Fix deadlock b/w jump_label_mutex vs. text_mutex jump label: Fix module __init section race * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: Check irq_remapped instead of remapping_enabled in destroy_irq()
2010-10-30Merge git://git.infradead.org/mtd-2.6Linus Torvalds8-58/+397
* git://git.infradead.org/mtd-2.6: (82 commits) mtd: fix build error in m25p80.c mtd: Remove redundant mutex from mtd_blkdevs.c MTD: Fix wrong check register_blkdev return value Revert "mtd: cleanup Kconfig dependencies" mtd: cfi_cmdset_0002: make sector erase command variable mtd: cfi_cmdset_0002: add CFI detection for SST 38VF640x chips mtd: cfi_util: add support for switching SST 39VF640xB chips into QRY mode mtd: cfi_cmdset_0001: use defined value of P_ID_INTEL_PERFORMANCE instead of hardcoded one block2mtd: dubious assignment P4080/mtd: Fix the freescale lbc issue with 36bit mode P4080/eLBC: Make Freescale elbc interrupt common to elbc devices mtd: phram: use KBUILD_MODNAME mtd: OneNAND: S5PC110: Fix double call suspend & resume function mtd: nand: fix MTD_MODE_RAW writes jffs2: use kmemdup mtd: sm_ftl: cosmetic, use bool when possible mtd: r852: remove useless pci powerup/down from suspend/resume routines mtd: blktrans: fix a race vs kthread_stop mtd: blktrans: kill BKL mtd: allow to unload the mtdtrans module if its block devices aren't open ... Fix up trivial whitespace-introduced conflict in drivers/mtd/mtdchar.c
2010-10-30Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds229-1720/+8166
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (215 commits) ARM: memblock: setup lowmem mappings using memblock ARM: memblock: move meminfo into find_limits directly ARM: memblock: convert free_highpages() to use memblock ARM: move freeing of highmem pages out of mem_init() ARM: memblock: convert memory detail printing to use memblock ARM: memblock: use memblock to free memory into arm_bootmem_init() ARM: memblock: use memblock when initializing memory allocators ARM: ensure membank array is always sorted ARM: 6466/1: implement flush_icache_all for the rest of the CPUs ARM: 6464/2: fix spinlock recursion in adjust_pte() ARM: fix memblock breakage ARM: 6465/1: Fix data abort accessing proc_info from __lookup_processor_type ARM: 6460/1: ixp2000: fix type of ixp2000_timer_interrupt ARM: 6449/1: Fix for compiler warning of uninitialized variable. ARM: 6445/1: fixup TCM memory types ARM: imx: Add wake functionality to GPIO ARM: mx5: Add gpio-keys to mx51 babbage board ARM: imx: Add gpio-keys to plat-mxc mx31_3ds: Fix spi registration mx31_3ds: Fix the logic for detecting the debug board ...
2010-10-30Merge branch 'master' of ↵David Woodhouse1899-23696/+52868
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git Conflicts: drivers/mtd/mtd_blkdevs.c Merge Grant's device-tree bits so that we can apply the subsequent fixes. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-10-30x86: Check irq_remapped instead of remapping_enabled in destroy_irq()Yinghai Lu1-1/+1
Russ Anderson reported: | There is a regression that is causing a NULL pointer dereference | in free_irte when shutting down xpc. git bisect narrowed it down | to git commit d585d06(intr_remap: Simplify the code further), which | changed free_irte(). Reverse applying the patch fixes the problem. We need to use irq_remapped() for each irq instead of checking only intr_remapping_enabled as there might be non remapped irqs even when remapping is enabled. [ tglx: use cfg instead of retrieving it again. Massaged changelog ] Reported-bisected-and-tested-by: Russ Anderson <rja@sgi.com> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Cc: Suresh Siddha <suresh.b.siddha@intel.com> LKML-Reference: <4CCBD511.40607@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-10-29Merge branches 'x86-fixes-for-linus' and 'x86-uv-for-linus' of ↵Linus Torvalds5-13/+50
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, alternative: Call stop_machine_text_poke() on all cpus x86-32: Restore irq stacks NUMA-aware allocations x86, memblock: Fix early_node_mem with big reserved region. * 'x86-uv-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, uv: More Westmere support on SGI UV x86, uv: Enable Westmere support on SGI UV
2010-10-29Merge branches 'msm-fixes' and 'msm-video' of ↵Linus Torvalds5-17/+32
git://codeaurora.org/quic/kernel/dwalker/linux-msm * 'msm-fixes' of git://codeaurora.org/quic/kernel/dwalker/linux-msm: msm: Kconfig: drop unused config options msm: fix compile failure when no debug uart is selected msm: fix debug-macro.S build failure msm: timer: Decrease shift on timer clocksource arm: mach-msm: fix error handling in msm_iommu_probe() msm: fix Kconfig target board selection msm: fix compile failure on struct membank node member * 'msm-video' of git://codeaurora.org/quic/kernel/dwalker/linux-msm: drivers/video/msm/mddi.c: Remove multiple KERN_<level> uses drivers: msm: video: add dev_set_name call drivers: video: msm: fix hang on disable_irq
2010-10-29Merge branch 'for-2637/s3c24xx-all' of git://git.fluff.org/bjdooks/linuxLinus Torvalds7-68/+399
* 'for-2637/s3c24xx-all' of git://git.fluff.org/bjdooks/linux: ARM: h1940: add UDA1380 to i2c devices list ARM: h1940: Fix backlight and LCD power functions ARM: S3C2440: fix boot failure introduced by recent changes in gpiolib ARM: S3C2440: various fixes in Kconfig file ARM: rx1950: Add UDA1380 to i2c devices list ARM: rx1950: Add LEDs support ARM: rx1950: Add battery device ARM: h1940: Implement mmc_power function ARM: h1940: Use gpiolib for latch access
2010-10-30ARM: Merge for-2637/s3c24xx/miscBen Dooks2-5/+4
2010-10-30ARM: Merge for-2637/s3c24xx/h1940Ben Dooks4-57/+183
2010-10-30ARM: Merge for-2637/s3c24xx/rx1950Ben Dooks1-6/+212
2010-10-30ARM: h1940: add UDA1380 to i2c devices listVasily Khoruzhick1-0/+20
Register UDA1380 codec during H1940 machine init Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-10-30ARM: h1940: Fix backlight and LCD power functionsVasily Khoruzhick2-16/+66
Current implementation of LCD and backlight power control functions is not complete, as result PDA consumes power in suspend. Fix this issue by managing state of some latch bits, just like WinMobile does. Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-10-29x86, alternative: Call stop_machine_text_poke() on all cpusJason Baron1-1/+1
Currently, text_poke_smp() passes a NULL as the third argument to __stop_machine(), which will only run stop_machine_text_poke() on 1 cpu. Change NULL -> cpu_online_mask, as stop_machine_text_poke() is intended to be run on all cpus. I actually didn't notice any problems with stop_machine_text_poke() only being called on 1 cpu, but found this via code inspection. Signed-off-by: Jason Baron <jbaron@redhat.com> LKML-Reference: <20101028152026.GB2875@redhat.com> Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2010-10-30ARM: S3C2440: fix boot failure introduced by recent changes in gpiolibAbdoulaye Walsimou Gaye1-0/+2
Recent changes in s3c gpio break mini2440 board and may be others. The problem is that mach-mini2440.c: mini2440_init() (where we call s3c_gpio_setpull()) is called before s3c2440.c: s3c2440_init() (where we initialize s3c24xx_gpiocfg_default.set_pull function pointer). This causes dereferencing of NULL pointer at boot time and a kernel panic. Signed-off-by: Abdoulaye Walsimou Gaye <awg@embtoolkit.org> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-samsung-soc@vger.kernel.org Signed-off-by: Ben Dooks <ben-linux@fluff.org>