| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
SGI UV's uv_tlb.c driver has become rather hard to read, with overly large
functions, non-standard coding style and (way) too long variable, constant
and function names and non-obvious code flow sequences.
This patch improves the readability and maintainability of the driver
significantly, by doing the following strict code cleanups with no side
effects:
- Split long functions into shorter logical functions.
- Shortened some variable and structure member names.
- Added special functions for reads and writes of MMR regs with
very long names.
- Added the 'tunables' table to shortened tunables_write().
- Added the 'stat_description' table to shorten uv_ptc_proc_write().
- Pass fewer 'stat' arguments where it can be derived from the 'bcp'
argument.
- Function definitions consistent on one line, and inline in few (short) cases.
- Moved some small structures and an atomic inline function to the header file.
- Moved some local variables to the blocks where they are used.
- Updated the copyright date.
- Shortened uv_write_global_mmr64() etc. using some aliasing; no
line breaks. Renamed many uv_.. functions that are not exported.
- Aligned structure fields.
[ note that not all structures are aligned the same way though; I'd like
to keep the extensive commenting in some of them. ]
- Shortened some long structure names.
- Standard pass/fail exit from init_per_cpu()
- Vertical alignment for mass initializations.
- More separation between blocks of code.
Tested on a 16-processor Altix UV.
Signed-off-by: Cliff Wickman <cpw@sgi.com>
Cc: penberg@kernel.org
Link: http://lkml.kernel.org/r/E1QOw12-0004MN-Lp@eag09.americas.sgi.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
This patch adds support for a new version of the SGI UV hub
chip. The hub chip is the node controller that connects multiple
blades into a larger coherent SSI.
For the most part, UV2 is compatible with UV1. The majority of
the changes are in the addresses of MMRs and in a few cases, the
contents of MMRs. These changes are the result in changes in the
system topology such as node configuration, processor types,
maximum nodes, physical address sizes, etc.
Signed-off-by: Jack Steiner <steiner@sgi.com>
Link: http://lkml.kernel.org/r/20110511175028.GA18006@sgi.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
This is a fix for the SGI Altix-UV Broadcast Assist Unit code,
which is used for TLB flushing.
Certain hardware configurations (that customers are ordering)
cause nasids (numa address space id's) to be non-consecutive.
Specifically, once you have more than 4 blades in a IRU
(Individual Rack Unit - or 1/2 rack) but less than the maximum
of 16, the nasid numbering becomes non-consecutive. This
currently results in a 'catastrophic error' (CATERR) detected by
the firmware during OS boot. The BAU is generating an 'INTD'
request that is targeting a non-existent nasid value. Such
configurations may also occur when a blade is configured off
because of hardware errors. (There is one UV hub per blade.)
This patch is required to support such configurations.
The problem with the tlb_uv.c code is that is using the
consecutive hub numbers as indices to the BAU distribution bit
map. These are simply the ordinal position of the hub or blade
within its partition. It should be using physical node numbers
(pnodes), which correspond to the physical nasid values. Use of
the hub number only works as long as the nasids in the partition
are consecutive and increase with a stride of 1.
This patch changes the index to be the pnode number, thus
allowing nasids to be non-consecutive.
It also provides a table in local memory for each cpu to
translate target cpu number to target pnode and nasid.
And it improves naming to properly reflect 'node' and 'uvhub'
versus 'nasid'.
Signed-off-by: Cliff Wickman <cpw@sgi.com>
Cc: <stable@kernel.org>
Link: http://lkml.kernel.org/r/E1QJmxX-0002Mz-Fk@eag09.americas.sgi.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
The BAU's initialization of the broadcast description header is
lacking the coherence domain (high bits) in the nasid. This
causes a catastrophic system failure when running on a system
with multiple coherence domains.
Signed-off-by: Cliff Wickman <cpw@sgi.com>
LKML-Reference: <E1PxKBB-0005F0-3U@eag09.americas.sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Fix a hard-coded limit of a maximum of 16 cpu's per socket.
The UV Broadcast Assist Unit code initializes by scanning the
cpu topology of the system and assigning a master cpu for each
socket and UV hub. That scan had an assumption of a limit of 16
cpus per socket. With Westmere we are going over that limit.
The UV hub hardware will allow up to 32.
If the scan finds the system has gone over that limit it returns
an error and we print a warning and fall back to doing TLB
shootdowns without the BAU.
Signed-off-by: Cliff Wickman <cpw@sgi.com>
Cc: <stable@kernel.org> # .37.x
LKML-Reference: <E1PZol7-0000mM-77@eag09.americas.sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Streamline the large uv_flush_send_and_wait() function by use of
a couple of helper functions.
And remove some excess comments.
Signed-off-by: Cliff Wickman <cpw@sgi.com>
Cc: gregkh@suse.de
LKML-Reference: <E1OJvNy-0004ay-IH@eag09.americas.sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Make the Broadcast Assist Unit driver use the BAU for TLB
shootdowns of cpu's on the local uvhub.
It was previously thought that IPI might be faster to the cpu's
on the local hub. But the IPI operation would have to follow
the completion of the BAU broadcast anyway. So we broadcast to
the local uvhub in all cases except when the current cpu was the
only local cpu in the mask.
This simplifies uv_flush_send_and_wait() in that it returns
either all shootdowns complete, or none.
Adjust the statistics to account for shootdowns on the local
uvhub.
Signed-off-by: Cliff Wickman <cpw@sgi.com>
Cc: gregkh@suse.de
LKML-Reference: <E1OJvNy-0004aq-G7@eag09.americas.sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Remove a faulty assumption that a long running BAU request has
encountered a hardware problem and will never finish.
Numalink congestion can make a request appear to have
encountered such a problem, but it is not safe to cancel the
request. If such a cancel is done but a reply is later received
we can miss a TLB shootdown.
We depend upon the max_bau_concurrent 'throttle' to prevent the
stay-busy case from happening.
Signed-off-by: Cliff Wickman <cpw@sgi.com>
Cc: gregkh@suse.de
LKML-Reference: <E1OJvNy-0004ad-BV@eag09.americas.sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Move some structure definitions from the C code to the BAU
header file, and change the organization of that header file a
little.
Signed-off-by: Cliff Wickman <cpw@sgi.com>
Cc: gregkh@suse.de
LKML-Reference: <E1OJvNy-0004aI-54@eag09.americas.sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Use a pointer from the per-cpu BAU control structure to the
per-cpu BAU statistics structure.
We nearly always know the first before needing the second.
Signed-off-by: Cliff Wickman <cpw@sgi.com>
Cc: gregkh@suse.de
LKML-Reference: <E1OJvNy-0004aB-2k@eag09.americas.sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
The numalink network can become so congested that TLB shootdown
using the Broadcast Assist Unit becomes slower than using IPI's.
In that case, disable the use of the BAU for a period of time.
The period is tunable. When the period expires the use of the
BAU is re-enabled. A count of these actions is added to the
statistics file.
Signed-off-by: Cliff Wickman <cpw@sgi.com>
Cc: gregkh@suse.de
LKML-Reference: <E1OJvNy-0004a4-0a@eag09.americas.sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Make the Broadcast Assist Unit driver's nine tuning values variable by
making them accessible through a read/write debugfs file.
The file will normally be mounted as
/sys/kernel/debug/sgi_uv/bau_tunables. The tunables are kept in each
cpu's per-cpu BAU structure.
The patch also does a little name improvement, and corrects the reset of
two destination timeout counters.
Signed-off-by: Cliff Wickman <cpw@sgi.com>
Cc: gregkh@suse.de
LKML-Reference: <E1OJvNx-0004Zx-Uo@eag09.americas.sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Calculate the Broadcast Assist Unit's destination timeout period from the
values in the relevant MMR's.
Store it in each cpu's per-cpu BAU structure so that a destination
timeout can be differentiated from a 'plugged' situation in which all
software ack resources are already allocated and a timeout is pending.
That case returns an immediate destination error.
Signed-off-by: Cliff Wickman <cpw@sgi.com>
Cc: gregkh@suse.de
LKML-Reference: <E1OJvNx-0004Zq-RK@eag09.americas.sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
- increase performance of the interrupt handler
- release timed-out software acknowledge resources
- recover from continuous-busy status due to a hardware issue
- add a 'throttle' to keep a uvhub from sending more than a
specified number of broadcasts concurrently (work around the hardware issue)
- provide a 'nobau' boot command line option
- rename 'pnode' and 'node' to 'uvhub' (the 'node' terminology
is ambiguous)
- add some new statistics about the scope of broadcasts, retries, the
hardware issue and the 'throttle'
- split off new function uv_bau_retry_msg() from
uv_bau_process_message() per community coding style feedback.
- simplify the argument list to uv_bau_process_message(), per
community coding style feedback.
Signed-off-by: Cliff Wickman <cpw@sgi.com>
Cc: linux-mm@kvack.org
Cc: Jack Steiner <steiner@sgi.com>
Cc: Russ Anderson <rja@sgi.com>
Cc: Mike Travis <travis@sgi.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <E1O25Z4-0004Ur-PB@eag09.americas.sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
That is "success", "unknown", "through", "performance", "[re|un]mapping"
, "access", "default", "reasonable", "[con]currently", "temperature"
, "channel", "[un]used", "application", "example","hierarchy", "therefore"
, "[over|under]flow", "contiguous", "threshold", "enough" and others.
Signed-off-by: André Goddard Rosa <andre.goddard@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
The SGI UV Broadcast Assist Unit is used to send TLB shootdown
messages to remote nodes of the system. The header of the
message must contain the subnode id of the block in the
receiving hub that handles such messages. It should always be
0x10, the id of the "LB" block.
It had previously been documented as a "must be zero" field.
Signed-off-by: Cliff Wickman <cpw@sgi.com>
Acked-by: Jack Steiner <steiner@sgi.com>
LKML-Reference: <E1Mc1x7-0005Ce-6t@eag09.americas.sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
The UV tlb shootdown code has a serious initialization error.
An array of structures [32*8] is initialized as if it were [32].
The array is indexed by (cpu number on the blade)*8, so the short
initialization works for up to 4 cpus on a blade.
But above that, we provide an invalid opcode to the hub's
broadcast assist unit.
This patch changes the allocation of the array to use its symbolic
dimensions for better clarity. And initializes all 32*8 entries.
Shortened 'UV_ACTIVATION_DESCRIPTOR_SIZE' to 'UV_ADP_SIZE' per Ingo's
recommendation.
Tested on the UV simulator.
Signed-off-by: Cliff Wickman <cpw@sgi.com>
Cc: <stable@kernel.org>
LKML-Reference: <E1M6lZR-0007kV-Aq@eag09.americas.sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Impact: cleanup
Make the following uv related cleanups.
* collect visible uv related definitions and interfaces into uv/uv.h
and use it. this cleans up the messy situation where on 64bit, uv
is defined properly, on 32bit generic it's dummy and on the rest
undefined. after this clean up, uv is defined on 64 and dummy on
32.
* update uv_flush_tlb_others() such that it takes cpumask of
to-be-flushed cpus as argument, instead of that minus self, and
returns yet-to-be-flushed cpumask, instead of modifying the passed
in parameter. this interface change will ease dummy implementation
of uv_flush_tlb_others() and makes uv tlb flush related stuff
defined in tlb_uv proper.
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Impact: reduce stack usage, use new cpumask API.
This is made a little more tricky by uv_flush_tlb_others which
actually alters its argument, for an IPI to be sent to the remaining
cpus in the mask.
I solve this by allocating a cpumask_var_t for this case and falling back
to IPI should this fail.
To eliminate temporaries in the caller, all flush_tlb_others implementations
now do the this-cpu-elimination step themselves.
Note also the curious "cpus_or(f->flush_cpumask, cpumask, f->flush_cpumask)"
which has been there since pre-git and yet f->flush_cpumask is always zero
at this point.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Mike Travis <travis@sgi.com>
|
|
Impact: cleanup, avoid sparse warnings
declare bitfield as unsigned to avoid dubious bitfield issue
CHECK arch/x86/kernel/tlb_64.c
arch/x86/include/asm/uv/uv_bau.h:136:22: warning: dubious bitfield without explicit `signed' or `unsigned'
arch/x86/include/asm/uv/uv_bau.h:138:25: warning: dubious bitfield without explicit `signed' or `unsigned'
arch/x86/include/asm/uv/uv_bau.h:140:15: warning: dubious bitfield without explicit `signed' or `unsigned'
arch/x86/include/asm/uv/uv_bau.h:143:14: warning: dubious bitfield without explicit `signed' or `unsigned'
arch/x86/include/asm/uv/uv_bau.h:146:14: warning: dubious bitfield without explicit `signed' or `unsigned'
arch/x86/include/asm/uv/uv_bau.h:149:18: warning: dubious bitfield without explicit `signed' or `unsigned'
arch/x86/include/asm/uv/uv_bau.h:151:18: warning: dubious bitfield without explicit `signed' or `unsigned'
arch/x86/include/asm/uv/uv_bau.h:155:14: error: dubious one-bit signed bitfield
arch/x86/include/asm/uv/uv_bau.h:159:18: error: dubious one-bit signed bitfield
arch/x86/include/asm/uv/uv_bau.h:173:19: error: dubious one-bit signed bitfield
arch/x86/include/asm/uv/uv_bau.h:181:16: error: dubious one-bit signed bitfield
arch/x86/include/asm/uv/uv_bau.h:185:18: error: dubious one-bit signed bitfield
arch/x86/include/asm/uv/uv_bau.h:188:16: error: dubious one-bit signed bitfield
CHECK arch/x86/kernel/tlb_uv.c
arch/x86/include/asm/uv/uv_bau.h:136:22: warning: dubious bitfield without explicit `signed' or `unsigned'
arch/x86/include/asm/uv/uv_bau.h:138:25: warning: dubious bitfield without explicit `signed' or `unsigned'
arch/x86/include/asm/uv/uv_bau.h:140:15: warning: dubious bitfield without explicit `signed' or `unsigned'
arch/x86/include/asm/uv/uv_bau.h:143:14: warning: dubious bitfield without explicit `signed' or `unsigned'
arch/x86/include/asm/uv/uv_bau.h:146:14: warning: dubious bitfield without explicit `signed' or `unsigned'
arch/x86/include/asm/uv/uv_bau.h:149:18: warning: dubious bitfield without explicit `signed' or `unsigned'
arch/x86/include/asm/uv/uv_bau.h:151:18: warning: dubious bitfield without explicit `signed' or `unsigned'
arch/x86/include/asm/uv/uv_bau.h:155:14: error: dubious one-bit signed bitfield
arch/x86/include/asm/uv/uv_bau.h:159:18: error: dubious one-bit signed bitfield
arch/x86/include/asm/uv/uv_bau.h:173:19: error: dubious one-bit signed bitfield
arch/x86/include/asm/uv/uv_bau.h:181:16: error: dubious one-bit signed bitfield
arch/x86/include/asm/uv/uv_bau.h:185:18: error: dubious one-bit signed bitfield
arch/x86/include/asm/uv/uv_bau.h:188:16: error: dubious one-bit signed bitfield
Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
|
|
Drop double underscores from header guards in arch/x86/include. They
are used inconsistently, and are not necessary.
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
|
|
Change header guards named "ASM_X86__*" to "_ASM_X86_*" since:
a. the double underscore is ugly and pointless.
b. no leading underscore violates namespace constraints.
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
|
