summaryrefslogtreecommitdiff
path: root/arch/s390
AgeCommit message (Collapse)AuthorFilesLines
2012-08-08s390/compat: fix mmap compat system callsHeiko Carstens1-2/+0
The native 31 bit and the compat behaviour for the mmap system calls differ: In native 31 bit mode the passed in address for the mmap system call will be unmodified passed to sys_mmap_pgoff(). In compat mode however the passed in address will be modified with compat_ptr() which masks out the most significant bit. The result is that in native 31 bit mode each mmap request (with MAP_FIXED) will fail where the most significat bit is set, while in compat mode it may succeed. This odd behaviour was introduced with d3815898 "[S390] mmap: add missing compat_ptr conversion to both mmap compat syscalls". To restore a consistent behaviour accross native and compat mode this patch functionally reverts the above mentioned commit. Cc: stable@vger.kernel.org Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-08-08s390/compat: fix compat wrappers for process_vm system callsHeiko Carstens1-2/+2
The compat wrappers incorrectly called the non compat versions of the system process_vm system calls. Cc: stable@vger.kernel.org Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-08-08s390: do not clobber personality flags in sys_32_personality()Jiri Kosina1-4/+5
There are multiple errors in how sys_32_personality() handles personality flags stored in top three bytes. - directly comparing current->personality against PER_LINUX32 doesn't work in cases when any of the personality flags stored in the top three bytes are used. - directly forcefully setting personality to PER_LINUX32 or PER_LINUX discards any flags stored in the top three bytes Fix the first one by properly using personality() macro to compare only PER_MASK bytes. Fix the second one by setting only the bits that should be set, instead of overwriting the whole value. Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-08-08s390/seccomp: add support for system call filtering using BPFHeiko Carstens3-1/+17
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-08-08s390/mm: remove MAX_PHYSADDR_BITS defineHeiko Carstens1-2/+0
It's unused, so remove it. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-07-31Merge branch 'akpm' (Andrew's patch-bomb)Linus Torvalds1-1/+1
Merge Andrew's second set of patches: - MM - a few random fixes - a couple of RTC leftovers * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (120 commits) rtc/rtc-88pm80x: remove unneed devm_kfree rtc/rtc-88pm80x: assign ret only when rtc_register_driver fails mm: hugetlbfs: close race during teardown of hugetlbfs shared page tables tmpfs: distribute interleave better across nodes mm: remove redundant initialization mm: warn if pg_data_t isn't initialized with zero mips: zero out pg_data_t when it's allocated memcg: gix memory accounting scalability in shrink_page_list mm/sparse: remove index_init_lock mm/sparse: more checks on mem_section number mm/sparse: optimize sparse_index_alloc memcg: add mem_cgroup_from_css() helper memcg: further prevent OOM with too many dirty pages memcg: prevent OOM with too many dirty pages mm: mmu_notifier: fix freed page still mapped in secondary MMU mm: memcg: only check anon swapin page charges for swap cache mm: memcg: only check swap cache pages for repeated charging mm: memcg: split swapin charge function into private and public part mm: memcg: remove needless !mm fixup to init_mm when charging mm: memcg: remove unneeded shmem charge type ...
2012-07-31memcg: rename config variablesAndrew Morton1-1/+1
Sanity: CONFIG_CGROUP_MEM_RES_CTLR -> CONFIG_MEMCG CONFIG_CGROUP_MEM_RES_CTLR_SWAP -> CONFIG_MEMCG_SWAP CONFIG_CGROUP_MEM_RES_CTLR_SWAP_ENABLED -> CONFIG_MEMCG_SWAP_ENABLED CONFIG_CGROUP_MEM_RES_CTLR_KMEM -> CONFIG_MEMCG_KMEM [mhocko@suse.cz: fix missed bits] Cc: Glauber Costa <glommer@parallels.com> Acked-by: Michal Hocko <mhocko@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Hugh Dickins <hughd@google.com> Cc: Tejun Heo <tj@kernel.org> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: David Rientjes <rientjes@google.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-31Merge branch 'for-linus' of ↵Linus Torvalds17-105/+103
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Martin Schwidefsky: "This it the second batch of s390 patches for the 3.6 merge window. Included is enablement for two common code changes, killable page faults and sorted exception tables. And the regular set of cleanup and bug fix patches." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390: make use of user_mode() macro where possible s390/mm: rename user_mode variable to addressing_mode s390/mm: fix fault handling for page table walk case s390/mm: make page faults killable s390: update defconfig s390/mm: downgrade page table after fork of a 31 bit process s390/ipl: Use diagnose 8 command separation s390/linker script: use RO_DATA_SECTION s390/exceptions: sort exception table at build time s390/debug: remove module_exit function / move EXPORT_SYMBOLs
2012-07-30ipc: use Kconfig options for __ARCH_WANT_[COMPAT_]IPC_PARSE_VERSIONWill Deacon2-1/+1
Rather than #define the options manually in the architecture code, add Kconfig options for them and select them there instead. This also allows us to select the compat IPC version parsing automatically for platforms using the old compat IPC interface. Reported-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Will Deacon <will.deacon@arm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-30atomic64_test: simplify the #ifdef for atomic64_dec_if_positive() testCatalin Marinas1-0/+1
Introduce CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE and use this instead of the multitude of #if defined() checks in atomic64_test.c Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-30s390: make use of user_mode() macro where possibleHeiko Carstens4-15/+15
We use the user_mode() helper already at several places but also have the open coded variant at other places. Convert the code to always use the helper function. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-07-30s390/mm: rename user_mode variable to addressing_modeHeiko Carstens6-14/+15
Fix name clash with user_mode() define which is also used in common code. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-07-30s390/mm: fix fault handling for page table walk caseHeiko Carstens1-6/+7
Make sure the kernel does not incorrectly create a SIGBUS signal during user space accesses: For user space accesses in the switched addressing mode case the kernel may walk page tables and access user address space via the kernel mapping. If a page table entry is invalid the function __handle_fault() gets called in order to emulate a page fault and trigger all the usual actions like paging in a missing page etc. by calling handle_mm_fault(). If handle_mm_fault() returns with an error fixup handling is necessary. For the switched addressing mode case all errors need to be mapped to -EFAULT, so that the calling uaccess function can return -EFAULT to user space. Unfortunately the __handle_fault() incorrectly calls do_sigbus() if VM_FAULT_SIGBUS is set. This however should only happen if a page fault was triggered by a user space instruction. For kernel mode uaccesses the correct action is to only return -EFAULT. So user space may incorrectly see SIGBUS signals because of this bug. For current machines this would only be possible for the switched addressing mode case in conjunction with futex operations. Cc: stable@vger.kernel.org Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-07-30s390/mm: make page faults killableHeiko Carstens1-1/+11
This is the s390 variant of 37b23e05 "x86,mm: make pagefault killable". Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-07-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds1-18/+0
Pull crypto updates from Herbert Xu: - Fixed algorithm construction hang when self-test fails. - Added SHA variants to talitos AEAD list. - New driver for Exynos random number generator. - Performance enhancements for arc4. - Added hwrng support to caam. - Added ahash support to caam. - Fixed bad kfree in aesni-intel. - Allow aesni-intel in FIPS mode. - Added atmel driver with support for AES/3DES/SHA. - Bug fixes for mv_cesa. - CRC hardware driver for BF60x family processors. * git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (66 commits) crypto: twofish-avx - remove useless instruction crypto: testmgr - add aead cbc aes hmac sha1,256,512 test vectors crypto: talitos - add sha224, sha384 and sha512 to existing AEAD algorithms crypto: talitos - export the talitos_submit function crypto: talitos - move talitos structures to header file crypto: atmel - add new tests to tcrypt crypto: atmel - add Atmel SHA1/SHA256 driver crypto: atmel - add Atmel DES/TDES driver crypto: atmel - add Atmel AES driver ARM: AT91SAM9G45: add crypto peripherals crypto: testmgr - allow aesni-intel and ghash_clmulni-intel in fips mode hwrng: exynos - Add support for Exynos random number generator crypto: aesni-intel - fix wrong kfree pointer crypto: caam - ERA retrieval and printing for SEC device crypto: caam - Using alloc_coherent for caam job rings crypto: algapi - Fix hang on crypto allocation crypto: arc4 - now arc needs blockcipher support crypto: caam - one tasklet per job ring crypto: caam - consolidate memory barriers from job ring en/dequeue crypto: caam - only query h/w in job ring dequeue path ...
2012-07-26s390: update defconfigHeiko Carstens1-2/+3
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2012-07-26s390/mm: downgrade page table after fork of a 31 bit processMartin Schwidefsky4-8/+25
The downgrade of the 4 level page table created by init_new_context is currently done only in start_thread31. If a 31 bit process forks the new mm uses a 4 level page table, including the task size of 2<<42 that goes along with it. This is incorrect as now a 31 bit process can map memory beyond 2GB. Define arch_dup_mmap to do the downgrade after fork. Cc: stable@vger.kernel.org Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-07-26s390/ipl: Use diagnose 8 command separationMichael Holzheu1-10/+2
Currently the vmcmd shutdown action is parsed by the kernel and if multiple cp commands have been specified, they are issued separately with the cpcmd() function. The underlying diagnose 8 instruction already allows to specify multiple commands that are separated by 0x15. The ASCEBC() function used by cpcmd() translates '\n' to 0x15. The '\n' character is currently used as vmcmd command separator and therefore the vmcmd string can be passed directly to the cpcmd() function. Using the diagnose 8 command separation has the advantage that also after disruptive commands that stop Linux, for example "def store", additional commands can be executed. Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-07-26s390/linker script: use RO_DATA_SECTIONHeiko Carstens1-1/+1
Use RO_DATA_SECTION instead of RODATA like several other archs do already. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-07-26s390/exceptions: sort exception table at build timeHeiko Carstens2-1/+1
Follow x86 and MIPS and sort the main exception table at build time. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-07-26s390/debug: remove module_exit function / move EXPORT_SYMBOLsHeiko Carstens1-47/+23
debug.c is not a module, so remove the module_exit function, since it will never be called. Also move the EXPORT_SYMBOL statements to the functions they belong to. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-07-24Merge tag 'kvm-3.6-1' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds5-38/+55
Pull KVM updates from Avi Kivity: "Highlights include - full big real mode emulation on pre-Westmere Intel hosts (can be disabled with emulate_invalid_guest_state=0) - relatively small ppc and s390 updates - PCID/INVPCID support in guests - EOI avoidance; 3.6 guests should perform better on 3.6 hosts on interrupt intensive workloads) - Lockless write faults during live migration - EPT accessed/dirty bits support for new Intel processors" Fix up conflicts in: - Documentation/virtual/kvm/api.txt: Stupid subchapter numbering, added next to each other. - arch/powerpc/kvm/booke_interrupts.S: PPC asm changes clashing with the KVM fixes - arch/s390/include/asm/sigp.h, arch/s390/kvm/sigp.c: Duplicated commits through the kvm tree and the s390 tree, with subsequent edits in the KVM tree. * tag 'kvm-3.6-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (93 commits) KVM: fix race with level interrupts x86, hyper: fix build with !CONFIG_KVM_GUEST Revert "apic: fix kvm build on UP without IOAPIC" KVM guest: switch to apic_set_eoi_write, apic_write apic: add apic_set_eoi_write for PV use KVM: VMX: Implement PCID/INVPCID for guests with EPT KVM: Add x86_hyper_kvm to complete detect_hypervisor_platform check KVM: PPC: Critical interrupt emulation support KVM: PPC: e500mc: Fix tlbilx emulation for 64-bit guests KVM: PPC64: booke: Set interrupt computation mode for 64-bit host KVM: PPC: bookehv: Add ESR flag to Data Storage Interrupt KVM: PPC: bookehv64: Add support for std/ld emulation. booke: Added crit/mc exception handler for e500v2 booke/bookehv: Add host crit-watchdog exception support KVM: MMU: document mmu-lock and fast page fault KVM: MMU: fix kvm_mmu_pagetable_walk tracepoint KVM: MMU: trace fast page fault KVM: MMU: fast path of handling guest page fault KVM: MMU: introduce SPTE_MMU_WRITEABLE bit KVM: MMU: fold tlb flush judgement into mmu_spte_update ...
2012-07-24Merge branch 'for-linus' of ↵Linus Torvalds175-989/+519
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 changes from Martin Schwidefsky: "No new functions, a few changes to make the code more robust, some cleanups and bug fixes." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (21 commits) s390/vtimer: rework virtual timer interface s390/dis: Add the servc instruction to the disassembler. s390/comments: unify copyright messages and remove file names s390/lgr: Add init check to lgr_info_log() s390/cpu init: use __get_cpu_var instead of per_cpu s390/idle: reduce size of s390_idle_data structure s390/idle: fix sequence handling vs cpu hotplug s390/ap: resend enable adapter interrupt request. s390/hypfs: Add missing get_next_ino() s390/dasd: add shutdown action s390/ipl: Fix ipib handling for "dumpreipl" shutdown action s390/smp: make absolute lowcore / cpu restart parameter accesses more robust s390/vmlogrdr: cleanup driver attribute usage s390/vmlogrdr: cleanup device attribute usage s390/ccwgroup: remove unused ccwgroup_device member s390/cio/chp: cleanup attribute usage s390/sigp: use sigp order code defines in assembly code s390/smp: use sigp cpu status definitions s390/smp/kvm: unifiy sigp definitions s390/smp: remove redundant check ...
2012-07-20s390/vtimer: rework virtual timer interfaceMartin Schwidefsky13-472/+222
The current virtual timer interface is inherently per-cpu and hard to use. The sole user of the interface is appldata which uses it to execute a function after a specific amount of cputime has been used over all cpus. Rework the virtual timer interface to hook into the cputime accounting. This makes the interface independent from the CPU timer interrupts, and makes the virtual timers global as opposed to per-cpu. Overall the code is greatly simplified. The downside is that the accuracy is not as good as the original implementation, but it is still good enough for appldata. Reviewed-by: Jan Glauber <jang@linux.vnet.ibm.com> Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-07-20s390/dis: Add the servc instruction to the disassembler.Cornelia Huck1-0/+1
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-07-20s390/comments: unify copyright messages and remove file namesHeiko Carstens164-355/+149
Remove the file name from the comment at top of many files. In most cases the file name was wrong anyway, so it's rather pointless. Also unify the IBM copyright statement. We did have a lot of sightly different statements and wanted to change them one after another whenever a file gets touched. However that never happened. Instead people start to take the old/"wrong" statements to use as a template for new files. So unify all of them in one go. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2012-07-20s390/lgr: Add init check to lgr_info_log()Michael Holzheu1-10/+5
If lgr has not been initialized, the lgr_info_log() function currently crashes because 'lgr_page' is not allocated. To fix this 'lgr_page' is allocated statically now. Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-07-17s390/cpu init: use __get_cpu_var instead of per_cpuHeiko Carstens1-1/+1
Just saves a couple of instructions. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-07-17s390/idle: reduce size of s390_idle_data structureHeiko Carstens1-1/+1
Avoid padding in the middle and the end of the data structure by moving nohz_delay member to the beginning. Saves eight byte per cpu. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-07-17s390/idle: fix sequence handling vs cpu hotplugHeiko Carstens2-3/+2
The s390 idle accounting code uses a sequence counter which gets used when the per cpu idle statistics get updated and read. One assumption on read access is that only when the sequence counter is even and did not change while reading all values the result is valid. On cpu hotplug however the per cpu data structure gets initialized via a cpu hotplug notifier on CPU_ONLINE. CPU_ONLINE however is too late, since the onlined cpu is already running and might access the per cpu data. Worst case is that the data structure gets initialized while an idle thread is updating its idle statistics. This will result in an uneven sequence counter after an update. As a result user space tools like top, which access /proc/stat in order to get idle stats, will busy loop waiting for the sequence counter to become even again, which will never happen until the queried cpu will update its idle statistics again. And even then the sequence counter will only have an even value for a couple of cpu cycles. Fix this by moving the initialization of the per cpu idle statistics to cpu_init(). I prefer that solution in favor of changing the notifier to CPU_UP_PREPARE, which would be a different solution to the problem. Cc: stable@vger.kernel.org Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-07-16s390/hypfs: Add missing get_next_ino()Michael Holzheu1-0/+1
With git commit 85fe4025c616a7c0ed07bc2fc8c5371b07f3888c ("fs: do not assign default i_ino in new_inode") the get_next_ino() function was moved from the new_inode() to the different file system implementations. Unfortunately hypfs has been overlooked by the author. With this patch the get_next_ino() is added also to hypfs. Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2012-07-03KVM: s390: Fix sigp sense handling.Cornelia Huck2-5/+10
If sigp sense doesn't have any status bits to report, it should set cc 0 and leave the register as-is. Since we know about the external call pending bit, we should report it if it is set as well. Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2012-07-03KVM: s390: use sigp condition code definesHeiko Carstens1-29/+29
Just use the defines instead of using plain numbers and adding a comment behind each line. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2012-07-03KVM: s390: fix sigp set prefix status stored casesHeiko Carstens1-2/+5
If an invalid parameter is passed or the addressed cpu is in an incorrect state sigp set prefix will store a status. This status must only have bits set as defined by the architecture. The current kvm implementation missed to clear bits and also did not set the intended status bit ("and" instead of "or" operation). Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2012-07-03KVM: s390: fix sigp sense running condition code handlingHeiko Carstens1-2/+2
Only if the sensed cpu is not running a status is stored, which is reflected by condition code 1. If the cpu is running, condition code 0 should be returned. Just the opposite of what the code is doing. Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2012-07-03s390/smp/kvm: unifiy sigp definitionsHeiko Carstens3-85/+64
The smp and the kvm code have different defines for the sigp order codes. Let's just have a single place where these are defined. Also move the sigp condition code and sigp cpu status bits to the new sigp.h header file. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2012-07-03s390/smp: remove redundant checkHeiko Carstens1-2/+2
condition code "status stored" for sigp sense running always implies that only the "not running" status bit is set. Therefore no need to check if it is set. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2012-06-27s390/ipl: Fix ipib handling for "dumpreipl" shutdown actionMichael Holzheu1-1/+1
Fix problem that was introduced with patch "s390/smp: make absolute lowcore / cpu restart parameter". After that patch the "dumpreipl" shutdown action does not work any more. To fix the problem we have to assign "reipl_block_actual" instead of "&reipl_block_actual" Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-06-14s390/smp: make absolute lowcore / cpu restart parameter accesses more robustHeiko Carstens10-36/+39
Setting the cpu restart parameters is done in three different fashions: - directly setting the four parameters individually - copying the four parameters with memcpy (using 4 * sizeof(long)) - copying the four parameters using a private structure In addition code in entry*.S relies on a certain order of the restart members of struct _lowcore. Make all of this more robust to future changes by adding a mem_absolute_assign(dest, val) define, which assigns val to dest using absolute addressing mode. Also the load multiple instructions in entry*.S have been split into separate load instruction so the order of the struct _lowcore members doesn't matter anymore. In addition move the prototypes of memcpy_real/absolute from uaccess.h to processor.h. These memcpy* variants are not related to uaccess at all. string.h doesn't seem to match as well, so lets use processor.h. Also replace the eight byte array in struct _lowcore which represents a misaliged u64 with a u64. The compiler will always create code that handles the misaligned u64 correctly. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-06-14crypto: s390 - clean up DES code a bit morePaul Bolle1-18/+0
Commit 98971f8439b1bb9a61682fe24a865ddd25167a6b ("crypto: s390 - cleanup DES code") should have also removed crypto_des.h. That file is unused and unneeded since that commit. So let's clean up that file too. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Acked-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-06-13KVM: s390: Perform early event mask processing during bootHeinz Graalfs2-3/+11
For processing under KVM it is required to detect the actual SCLP console type in order to set it as preferred console. Signed-off-by: Heinz Graalfs <graalfs@linux.vnet.ibm.com> Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> Acked-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2012-06-13KVM: s390: Set CPU in stopped state on initial cpu resetChristian Borntraeger1-0/+1
The initial cpu reset sets the cpu in the stopped state. Several places check for the cpu state (e.g. sigp set prefix) and not setting the STOPPED state triggered errors with newer guest kernels after reboot. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2012-06-05S390: Smp: remove call to ipi_call_lock()/ipi_call_unlock()Yong Zhang1-2/+0
ipi_call_lock/unlock() lock resp. unlock call_function.lock. This lock protects only the call_function data structure itself, but it's completely unrelated to cpu_online_mask. The mask to which the IPIs are sent is calculated before call_function.lock is taken in smp_call_function_many(), so the locking around set_cpu_online() is pointless and can be removed. [ tglx: Massaged changelog ] Signed-off-by: Yong Zhang <yong.zhang0@gmail.com> Cc: ralf@linux-mips.org Cc: sshtylyov@mvista.com Cc: david.daney@cavium.com Cc: nikunj@linux.vnet.ibm.com Cc: paulmck@linux.vnet.ibm.com Cc: axboe@kernel.dk Cc: peterz@infradead.org Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: linux390@de.ibm.com Cc: linux-s390@vger.kernel.org Link: http://lkml.kernel.org/r/1338275765-3217-5-git-send-email-yong.zhang0@gmail.com Acked-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Acked-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2012-06-05s390/ccwgroup: remove unused ccwgroup_device memberSebastian Ott1-2/+0
The creator_id is no longer used. Just get rid of it. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-06-05s390/sigp: use sigp order code defines in assembly codeHeiko Carstens10-21/+33
Use sigp order code defines in assembly code as well. With this change all places that use sigp constants should have been converted to use self describing defines instead of directly using constants. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-06-05s390/smp: use sigp cpu status definitionsHeiko Carstens1-2/+1
We got them from the kvm code, so let's use them. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-06-05s390/smp/kvm: unifiy sigp definitionsHeiko Carstens3-85/+64
The smp and the kvm code have different defines for the sigp order codes. Let's just have a single place where these are defined. Also move the sigp condition code and sigp cpu status bits to the new sigp.h header file. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-06-05s390/smp: remove redundant checkHeiko Carstens1-2/+2
condition code "status stored" for sigp sense running always implies that only the "not running" status bit is set. Therefore no need to check if it is set. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-06-05s390/kvm: get rid of duplicate instructionChristian Borntraeger1-1/+0
After commit 5e8010cb50d3de7202641c0088c211f7c9593ebc s390: replace TIF_SIE with PF_VCPU there is no need to load the thread info before sie_loop where it is also loaded. Get rid of this duplicate instruction. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-06-01Merge branch 'for-linus' of ↵Linus Torvalds3-46/+15
git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal Pull third pile of signal handling patches from Al Viro: "This time it's mostly helpers and conversions to them; there's a lot of stuff remaining in the tree, but that'll either go in -rc2 (isolated bug fixes, ideally via arch maintainers' trees) or will sit there until the next cycle." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal: x86: get rid of calling do_notify_resume() when returning to kernel mode blackfin: check __get_user() return value whack-a-mole with TIF_FREEZE FRV: Optimise the system call exit path in entry.S [ver #2] FRV: Shrink TIF_WORK_MASK [ver #2] FRV: Prevent syscall exit tracing and notify_resume at end of kernel exceptions new helper: signal_delivered() powerpc: get rid of restore_sigmask() most of set_current_blocked() callers want SIGKILL/SIGSTOP removed from set set_restore_sigmask() is never called without SIGPENDING (and never should be) TIF_RESTORE_SIGMASK can be set only when TIF_SIGPENDING is set don't call try_to_freeze() from do_signal() pull clearing RESTORE_SIGMASK into block_sigmask() sh64: failure to build sigframe != signal without handler openrisc: tracehook_signal_handler() is supposed to be called on success new helper: sigmask_to_save() new helper: restore_saved_sigmask() new helpers: {clear,test,test_and_clear}_restore_sigmask() HAVE_RESTORE_SIGMASK is defined on all architectures now
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-10 18:47:46 +0000