summaryrefslogtreecommitdiff
path: root/arch/powerpc/sysdev
AgeCommit message (Collapse)AuthorFilesLines
2012-10-06Merge branch 'next' of ↵Linus Torvalds9-98/+403
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc Pull powerpc updates from Benjamin Herrenschmidt: "Some highlights in addition to the usual batch of fixes: - 64TB address space support for 64-bit processes by Aneesh Kumar - Gavin Shan did a major cleanup & re-organization of our EEH support code (IBM fancy PCI error handling & recovery infrastructure) which paves the way for supporting different platform backends, along with some rework of the PCIe code for the PowerNV platform in order to remove home made resource allocations and instead use the generic code (which is possible after some small improvements to it done by Gavin). - Uprobes support by Ananth N Mavinakayanahalli - A pile of embedded updates from Freescale folks, including new SoC and board supports, more KVM stuff including preparing for 64-bit BookE KVM support, ePAPR 1.1 updates, etc..." Fixup trivial conflicts in drivers/scsi/ipr.c * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (146 commits) powerpc/iommu: Fix multiple issues with IOMMU pools code powerpc: Fix VMX fix for memcpy case driver/mtd:IFC NAND:Initialise internal SRAM before any write powerpc/fsl-pci: use 'Header Type' to identify PCIE mode powerpc/eeh: Don't release eeh_mutex in eeh_phb_pe_get powerpc: Remove tlb batching hack for nighthawk powerpc: Set paca->data_offset = 0 for boot cpu powerpc/perf: Sample only if SIAR-Valid bit is set in P7+ powerpc/fsl-pci: fix warning when CONFIG_SWIOTLB is disabled powerpc/mpc85xx: Update interrupt handling for IFC controller powerpc/85xx: Enable USB support in p1023rds_defconfig powerpc/smp: Do not disable IPI interrupts during suspend powerpc/eeh: Fix crash on converting OF node to edev powerpc/eeh: Lock module while handling EEH event powerpc/kprobe: Don't emulate store when kprobe stwu r1 powerpc/kprobe: Complete kprobe and migrate exception frame powerpc/kprobe: Introduce a new thread flag powerpc: Remove unused __get_user64() and __put_user64() powerpc/eeh: Global mutex to protect PE tree powerpc/eeh: Remove EEH PE for normal PCI hotplug ...
2012-10-04powerpc/iommu: Fix multiple issues with IOMMU pools codeAnton Blanchard1-0/+12
There are a number of issues in the recent IOMMU pools code: - On a preempt kernel we might switch CPUs in the middle of building a scatter gather list. When this happens the handle hint passed in no longer falls within the local CPU's pool. Check for this and fall back to the pool hint. - We were missing a spin_unlock/spin_lock in one spot where we switch pools. - We need to provide locking around dart_tlb_invalidate_all and dart_tlb_invalidate_one now that the global lock is gone. Reported-by: Alexander Graf <agraf@suse.de> Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: <stable@kernel.org> [v3.6]
2012-09-27powerpc/fsl-pci: use 'Header Type' to identify PCIE modeMinghuan Lian1-13/+24
The original code uses 'Programming Interface' field to judge if PCIE is EP or RC mode, however, some latest silicons do not support this functionality. According to PCIE specification, 'Header Type' offset 0x0e is used to indicate header type, so change code to use 'Header Type' field to judge PCIE mode. Because FSL PCI controller does not support 'Header Type', patch still uses 'Programming Interface' to identify PCI mode. Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com> Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-09-19powerpc/fsl-pci: fix warning when CONFIG_SWIOTLB is disabledJia Hongtao1-0/+2
Fix the following warning: arch/powerpc/sysdev/fsl_pci.c: In function 'fsl_pci_probe': arch/powerpc/sysdev/fsl_pci.c:867:25: error: unused variable 'hose' Signed-off-by: Jia Hongtao <B38951@freescale.com> Acked-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-09-19powerpc/mpc85xx: Update interrupt handling for IFC controllerPrabhakar Kushwaha1-12/+8
IFC may have one or two interrupts. If two interrupt specifiers are present, the first is the "common" interrupt (CM_EVTER_STAT), and the second is the NAND interrupt (NAND_EVTER_STAT). If there is only one, that interrupt reports both types of event. Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-09-13Merge branch 'ofdeviceiddata' of git://git.pengutronix.de/git/ukl/linux into ↵Olof Johansson1-4/+4
next/fixes-non-critical From "Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>: this is the 2nd version of this series whose goal is to make struct of_device_id.data const. Conceptually a driver must not modify the data contained there so making it const is the right thing. v1 of this series was sent with Message-id: 1342182734-321-1-git-send-email-y. Changes since then are: - powerpc fixes - several new consts that were found by Arnd that are possible after patch 19. Arnd suggested to take this series via arm-soc late for 3.6 in one go because patch 19 depends on the former patches but is a precondition to the latter and it fixes a few warnings. So getting it in via the respective maintainer trees would need a much bigger coordination effort. That means I prefer getting Acks over you taking the patch. Vinod Koul already took dmaengine: at_hdmac: add a few const qualifiers that is in next-20120723 as 7fd63ccdad72 now. Vinod, I don't follow your pull requests, but assuming you didn't let it already pull for 3.6 I suggest you drop it from your queue and I just take your Ack. This series was build tested for arm (all defconfigs) and powerpc (all defconfigs and an allyesconfig) and grep didn't find more issues. As before it introduces a warning in drivers/regulator/twl-regulator.c. This driver does modify its .of_match_table when a device is bound which doesn't fits the concept of independant devices. Arnd noticed another new warning in drivers/scsi/qlogicpti.c that isn't that easy to resolve, because the pointer to (now) const data is passed as first argument to scsi_host_alloc. To fix that properly struct Scsi_Host.hostt needs to get a const, too. Alternatively I could introduce a cast removing the const, but I don't like that. * 'ofdeviceiddata' of git://git.pengutronix.de/git/ukl/linux: (25 commits) dma: tegra: make data used as *of_device_id.data const can: mpc5xxx_can: make data used as *of_device_id.data const macintosh/mediabay: make data used as *of_device_id.data const i2c/mpc: make data used as *of_device_id.data const mfd/da9052: make i2c_device_id array const powerpc/fsl_msi: drop unneeded cast to non-const pointer gpio/gpio-omap: make platformdata used as *of_device_id.data const of: add const to struct *of_device_id.data dma: tegra: make tegra_dma.chip_data a pointer to const data watchdog/mpc8xxx: add a const qualifier powerpc/celleb_pci: add a const qualifier powerpc/fsl_msi: add a const qualifier powerpc/83xx: add a const qualifier macintosh/mediabay: add a const qualifier mmc/omap_hsmmc: add a const qualifier i2c/mpc: add a const qualifier i2c/i2c-omap: add a const qualifier gpio/mpc8xxx: add a const qualifier gpio/gpio-omap.c: add a const qualifier misc/atmel_tc: make atmel_tc.tcb_config member point to const data Signed-off-by: Arnd Bergmann <arnd@arndb.de> [olof: repulled a v3 version of the branch that rebased to add some more acked-bys and added one more patch on top for tegra] Signed-off-by: Olof Johansson <olof@lixom.net>
2012-09-12powerpc/fsl-pci: Unify pci/pcie initialization codeJia Hongtao2-42/+75
We unified the Freescale pci/pcie initialization by changing the fsl_pci to a platform driver. In previous PCI code architecture the initialization routine is called at board_setup_arch stage. Now the initialization is done in probe function which is architectural better. Also It's convenient for adding PM support for PCI controller in later patch. Now we registered pci controllers as platform devices. So we combine two initialization code as one platform driver. Signed-off-by: Jia Hongtao <B38951@freescale.com> Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Chunhe Lan <Chunhe.Lan@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-09-12powerpc/pci: Use PCIe IP block revision register instead of compatibleRoy Zang1-6/+8
Freescale PCIe IP block revision bigger than rev2.2 will also need redefine the sequence of inbound windows. So change to use IP block revision instead of compatible for the judgment. Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-09-12powerpc/pci: Add IP revision register define for Freescale PCIe controllerRoy Zang1-1/+4
Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-09-12powerpc/mpic: FSL MPIC error interrupt support.Varun Sethi4-2/+215
All SOC device error interrupts are muxed and delivered to the core as a single MPIC error interrupt. Currently all the device drivers requiring access to device errors have to register for the MPIC error interrupt as a shared interrupt. With this patch we add interrupt demuxing capability in the mpic driver, allowing device drivers to register for their individual error interrupts. This is achieved by handling error interrupts in a cascaded fashion. MPIC error interrupt is handled by the "error_int_handler", which subsequently demuxes it using the EISR and delivers it to the respective drivers. The error interrupt capability is dependent on the MPIC EIMR register, which was introduced in FSL MPIC version 4.1 (P4080 rev2). So, error interrupt demuxing capability is dependent on the MPIC version and can be used for versions >= 4.1. Signed-off-by: Varun Sethi <Varun.Sethi@freescale.com> Signed-off-by: Bogdan Hamciuc <bogdan.hamciuc@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-09-12powerpc/swiotlb: Enable at early stage and disable if not necessaryJia Hongtao1-4/+1
Remove the dependency on PCI initialization for SWIOTLB initialization. So that PCI can be initialized at proper time. SWIOTLB is partly determined by PCI inbound/outbound map which is assigned in PCI initialization. But swiotlb_init() should be done at the stage of mem_init() which is much earlier than PCI initialization. So we reserve the memory for SWIOTLB first and free it if not necessary. All boards are converted to fit this change. Signed-off-by: Jia Hongtao <B38951@freescale.com> Signed-off-by: Li Yang <leoli@freescale.com> Acked-by: Tony Breeds <tony@bakeyournoodle.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-09-12powerpc/mpic: finish supporting timer group B on Freescale chipsVarun Sethi1-16/+42
Previously, these interrupts would be mapped, but the offset calculation was broken, and only the first group was initialized. Signed-off-by: Varun Sethi <Varun.Sethi@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-09-12powerpc/fsl-pci: add fsl,qoriq-pcie-v2.4 compatible stringTimur Tabi1-0/+1
The PCI controller on the Freescale P5040 is v2.4. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-09-12powerpc/85xx: L2sram - Add compatible string to the device id listTang Yuantian1-0/+10
The following platforms are supported: mpc8544, mpc8572, mpc8536, p1021, p1025, p1024, p1010. Signed-off-by: Tang Yuantian <Yuantian.Tang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-09-11powerpc/fsl_msi: drop unneeded cast to non-const pointerArnd Bergmann1-3/+3
This cast is unneeded since *of_device_id.data became const. [ukl: split Arnd's patch by driver and add changelog] Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2012-09-11powerpc/fsl_msi: add a const qualifierUwe Kleine-König1-1/+1
This prepares *of_device_id.data becoming const. Without this change the following warning would occur: arch/powerpc/sysdev/fsl_msi.c: In function 'fsl_of_msi_probe': arch/powerpc/sysdev/fsl_msi.c:379:11: error: assignment discards 'const' qualifier from pointer target type [-Werror] Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2012-09-07Merge branch 'merge' into nextBenjamin Herrenschmidt3-6/+16
Brings in various bug fixes from 3.6-rcX
2012-09-05powerpc: Make sure IPI handlers see data written by IPI sendersPaul Mackerras1-1/+5
We have been observing hangs, both of KVM guest vcpu tasks and more generally, where a process that is woken doesn't properly wake up and continue to run, but instead sticks in TASK_WAKING state. This happens because the update of rq->wake_list in ttwu_queue_remote() is not ordered with the update of ipi_message in smp_muxed_ipi_message_pass(), and the reading of rq->wake_list in scheduler_ipi() is not ordered with the reading of ipi_message in smp_ipi_demux(). Thus it is possible for the IPI receiver not to see the updated rq->wake_list and therefore conclude that there is nothing for it to do. In order to make sure that anything done before smp_send_reschedule() is ordered before anything done in the resulting call to scheduler_ipi(), this adds barriers in smp_muxed_message_pass() and smp_ipi_demux(). The barrier in smp_muxed_message_pass() is a full barrier to ensure that there is a full ordering between the smp_send_reschedule() caller and scheduler_ipi(). In smp_ipi_demux(), we use xchg() rather than xchg_local() because xchg() includes release and acquire barriers. Using xchg() rather than xchg_local() makes sense given that ipi_message is not just accessed locally. This moves the barrier between setting the message and calling the cause_ipi() function into the individual cause_ipi implementations. Most of them -- those that used outb, out_8 or similar -- already had a full barrier because out_8 etc. include a sync before the MMIO store. This adds an explicit barrier in the two remaining cases. These changes made no measurable difference to the speed of IPIs as measured using a simple ping-pong latency test across two CPUs on different cores of a POWER7 machine. The analysis of the reason why processes were not waking up properly is due to Milton Miller. Cc: stable@vger.kernel.org # v3.0+ Reported-by: Milton Miller <miltonm@bga.com> Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-09-05powerpc/dart: Remove uses of virt_to_abs() and abs_to_virt()Michael Ellerman1-4/+3
These days they are just wrappers around __pa() and __va() respectively. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-08-24powerpc/mpic_msgr: Add missing includesScott Wood1-0/+3
Add several #includes that mpic_msgr relies on being pulled implicitly, which only happens on certain configs. Signed-off-by: Scott Wood <scottwood@freescale.com> Cc: Meador Inge <meador_inge@mentor.com> Cc: Jia Hongtao <B38951@freescale.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-08-03powerpc/fsl-pci: Only scan PCI bus if configured as a hostJia Hongtao1-5/+8
We change fsl_add_bridge to return -ENODEV if the controller is working in agent mode. Then check the return value of fsl_add_bridge to guarantee that only successfully added host bus will be scanned. Signed-off-by: Jia Hongtao <B38951@freescale.com> Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-07-31Merge tag 'irqdomain-for-linus' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds3-5/+2
Pull irqdomain changes from Grant Likely: "Round of refactoring and enhancements to irq_domain infrastructure. This series starts the process of simplifying irqdomain. The ultimate goal is to merge LEGACY, LINEAR and TREE mappings into a single system, but had to back off from that after some last minute bugs. Instead it mainly reorganizes the code and ensures that the reverse map gets populated when the irq is mapped instead of the first time it is looked up. Merging of the irq_domain types is deferred to v3.7 In other news, this series adds helpers for creating static mappings on a linear or tree mapping." * tag 'irqdomain-for-linus' of git://git.secretlab.ca/git/linux-2.6: irqdomain: Improve diagnostics when a domain mapping fails irqdomain: eliminate slow-path revmap lookups irqdomain: Fix irq_create_direct_mapping() to test irq_domain type. irqdomain: Eliminate dedicated radix lookup functions irqdomain: Support for static IRQ mapping and association. irqdomain: Always update revmap when setting up a virq irqdomain: Split disassociating code into separate function irq_domain: correct a minor wrong comment for linear revmap irq_domain: Standardise legacy/linear domain selection irqdomain: Make ops->map hook optional irqdomain: Remove unnecessary test for IRQ_DOMAIN_MAP_LEGACY irqdomain: Simple NUMA awareness. devicetree: add helper inline for retrieving a node's full name
2012-07-31Merge remote-tracking branch 'kumar/merge' into mergeBenjamin Herrenschmidt2-27/+16
Kumar says: "A few patches that missed the initial 3.6 window. These are bug fixes at this point."
2012-07-26powerpc/85xx: Fix sram_offset parameter typeClaudiu Manoil2-27/+16
The sram_offset parameter represents a physical address and should be of type phys_addr_t. As part of this fix, the extraction of sram_params is being cleaned-up and fixed. This patch fixes now the case when the offset value of 0xfff00000 was being rejected by the driver (returning -EINVAL), although this is a valid offset value. Signed-off-by: Tang Yuantian <Yuantian.Tang@freescale.com> Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-07-24Merge remote-tracking branch 'origin' into irqdomain/nextGrant Likely6-6/+86
2012-07-24Merge tag 'for-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds1-1/+1
Pull PCI changes from Bjorn Helgaas: "Host bridge hotplug: - Add MMCONFIG support for hot-added host bridges (Jiang Liu) Device hotplug: - Move fixups from __init to __devinit (Sebastian Andrzej Siewior) - Call FINAL fixups for hot-added devices, too (Myron Stowe) - Factor out generic code for P2P bridge hot-add (Yinghai Lu) - Remove all functions in a slot, not just those with _EJx (Amos Kong) Dynamic resource management: - Track bus number allocation (struct resource tree per domain) (Yinghai Lu) - Make P2P bridge 1K I/O windows work with resource reassignment (Bjorn Helgaas, Yinghai Lu) - Disable decoding while updating 64-bit BARs (Bjorn Helgaas) Power management: - Add PCIe runtime D3cold support (Huang Ying) Virtualization: - Add VFIO infrastructure (ACS, DMA source ID quirks) (Alex Williamson) - Add quirks for devices with broken INTx masking (Jan Kiszka) Miscellaneous: - Fix some PCI Express capability version issues (Myron Stowe) - Factor out some arch code with a weak, generic, pcibios_setup() (Myron Stowe)" * tag 'for-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (122 commits) PCI: hotplug: ensure a consistent return value in error case PCI: fix undefined reference to 'pci_fixup_final_inited' PCI: build resource code for M68K architecture PCI: pciehp: remove unused pciehp_get_max_lnk_width(), pciehp_get_cur_lnk_width() PCI: reorder __pci_assign_resource() (no change) PCI: fix truncation of resource size to 32 bits PCI: acpiphp: merge acpiphp_debug and debug PCI: acpiphp: remove unused res_lock sparc/PCI: replace pci_cfg_fake_ranges() with pci_read_bridge_bases() PCI: call final fixups hot-added devices PCI: move final fixups from __init to __devinit x86/PCI: move final fixups from __init to __devinit MIPS/PCI: move final fixups from __init to __devinit PCI: support sizing P2P bridge I/O windows with 1K granularity PCI: reimplement P2P bridge 1K I/O windows (Intel P64H2) PCI: disable MEM decoding while updating 64-bit MEM BARs PCI: leave MEM and IO decoding disabled during 64-bit BAR sizing, too PCI: never discard enable/suspend/resume_early/resume fixups PCI: release temporary reference in __nv_msi_ht_cap_quirk() PCI: restructure 'pci_do_fixups()' ...
2012-07-23powerpc/mpic: Create a revmap with enough entries for IPIs and timersBenjamin Herrenschmidt1-1/+1
The current mpic code creates a linear revmap just big enough for all the sources, which happens to miss the IPIs and timers on some machines. This will in turn break when the irqdomain code loses the fallback of doing a linear search when the revmap fails (and really slows down IPIs otherwise). This happens for example on the U4 based Apple machines such as the dual core PowerMac G5s. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-07-13Merge remote-tracking branch 'kumar/next' into nextBenjamin Herrenschmidt4-3/+83
Freescale updates for 3.6
2012-07-11irqdomain: Eliminate dedicated radix lookup functionsGrant Likely2-2/+2
In preparation to remove the slow revmap path, eliminate the public radix revmap lookup functions. This simplifies the code and makes the slowpath removal patch a lot simpler. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Rob Herring <rob.herring@calxeda.com>
2012-07-11irqdomain: Always update revmap when setting up a virqGrant Likely1-3/+0
At irq_setup_virq() time all of the data needed to update the reverse map is available, but the current code ignores it and relies upon the slow path to insert revmap records. This patch adds revmap updating to the setup path so the slow path will no longer be necessary. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Rob Herring <rob.herring@calxeda.com>
2012-07-11powerpc/fsl-pci: get PCI init out of board filesScott Wood2-1/+78
As an alternative incremental starting point to Jia Hongtao's patchset, get the FSL PCI init out of the board files, but do not yet convert to a platform driver. Rather than having each board supply a magic register offset for determining the "primary" bus, we look for which PCI host bridge contains an ISA node within its subtree. If there is no ISA node, normally that would mean there is no primary bus, but until certain bugs are fixed we arbitrarily designate a primary in this case. Conversion to a platform driver and related improvements can happen after this, as the ordering issues are sorted out. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-07-11powerpc: Use CURRENT_THREAD_INFO instead of open coded assemblyStuart Yoder1-1/+1
Signed-off-by: Stuart Yoder <stuart.yoder@freescale.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-07-10powerpc/qe: set IReady in QE Microcode UploadKokoris, Ioannis1-0/+3
QE Microcode Initialization using qe_upload_microcode() does not work on P1021 if the IRAM-Ready register is not set after the microcode upload. Add a definition for the "I-RAM Ready" register and sets it upon microcode upload completion. Signed-off-by: Ioannis Kokkoris <ioannis.kokoris@siemens-enterprise.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-07-10powerpc/mpic: Use the MPIC_LARGE_VECTORS flag for FSL MPIC.Varun Sethi1-1/+1
We should use the MPIC_LARG_VECTORS flag while intializing the MPIC. This prevents us from eating in to hardware vector number space (MSIs) while setting up internal sources. Signed-off-by: Varun Sethi <Varun.Sethi@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-07-10powerpc/fsl/pci: Fix when quirk_fsl_pcie_header is freed upMatias Garcia1-1/+1
Change quirk_fsl_pcie_header from __init to __devinit to ensure if we have a runtime access (like via an FPGA being loaded after boot on the PCIe link) that we dont access randomly freed memory. Signed-off-by: Matias Garcia <mgarcia@rossvideo.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-06-16powerpc/PCI: move fixup hooks from __init to __devinitSebastian Andrzej Siewior2-2/+2
The fixups are executed once the pci-device is found which is during boot process so __init seems fine as long as the platform does not support hotplug. However it is possible to remove the PCI bus at run time and have it rediscovered again via "echo 1 > /sys/bus/pci/rescan" and this will call the fixups again. Cc: Kumar Gala <galak@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-05-10Merge remote-tracking branch 'jwb/next' into nextBenjamin Herrenschmidt1-14/+28
Josh writes: << A few patches from Suzie for 47x kexec/kdump support, and some MSI patches from Mai La. >>
2012-05-03powerpc/40x: Use {upper,lower}_32_bits for msi_physJosh Boyer1-2/+2
Fix a build error when -Werror is set: arch/powerpc/sysdev/ppc4xx_msi.c: In function ‘ppc4xx_setup_pcieh_hw’: arch/powerpc/sysdev/ppc4xx_msi.c:178:2: error: right shift count >= width of type [-Werror] Signed-off-by: Josh Boyer <jwboyer@gmail.com>
2012-05-03powerpc/44x: Fix PCI MSI support for Maui APM821xx SoC and Bluestone boardMai La1-14/+28
This patch consists of: - Enable PCI MSI as default for Bluestone board - Change definition of number of MSI interrupts as it depends on SoC - Fix returning ENODEV as finding MSI node - Fix MSI physical high and low address - Keep MSI data logically Signed-off-by: Mai La <mla@apm.com> Signed-off-by: Josh Boyer <jwboyer@gmail.com>
2012-04-30powerpc/irqdomain: Fix broken NR_IRQ referencesGrant Likely2-6/+4
The switch from using irq_map to irq_alloc_desc*() for managing irq number allocations introduced new bugs in some of the powerpc interrupt code. Several functions rely on the value of NR_IRQS to determine the maximum irq number that could get allocated. However, with sparse_irq and using irq_alloc_desc*() the maximum possible irq number is now specified with 'nr_irqs' which may be a number larger than NR_IRQS. This has caused breakage on powermac when CONFIG_NR_IRQS is set to 32. This patch removes most of the direct references to NR_IRQS in the powerpc code and replaces them with either a nr_irqs reference or by using the common for_each_irq_desc() macro. The powerpc-specific for_each_irq() macro is removed at the same time. Also, the Cell axon_msi driver is refactored to remove the global build assumption on the size of NR_IRQS and instead add a limit to the maximum irq number when calling irq_domain_add_nomap(). Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-04-30powerpc/8xx: Fix NR_IRQ bugs and refactor 8xx interrupt controllerGrant Likely1-41/+20
The mpc8xx driver uses a reference to NR_IRQS that is buggy. It uses NR_IRQs for the array size of the ppc_cached_irq_mask bitmap, but NR_IRQs could be smaller than the number of hardware irqs that ppc_cached_irq_mask tracks. Also, while fixing that problem, it became apparent that the interrupt controller only supports 32 interrupt numbers, but it is written as if it supports multiple register banks which is more complicated. This patch pulls out the buggy reference to NR_IRQs and fixes the size of the ppc_cached_irq_mask to match the number of HW irqs. It also drops the now-unnecessary code since ppc_cached_irq_mask is no longer an array. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-04-27Merge branch 'for-v3.4-rc5' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux Pull build fixes for less mainstream architectures from Paul Gortmaker: "These are fixes for frv(1), blackfin(2), powerpc(1) and xtensa(4). Fortunately the touches are nearly all specific to files just used by the arch in question. The two touches to shared/common files [kernel/irq/debug.h and drivers/pci/Makefile] are trivial to assess as no risk to anyone. Half of them relate to xtensa directly. It was only when I fixed the last xtensa issue that I realized that the arch has been broken for a significant time, and isn't a specific v3.4 regression. So if you wanted, we could leave xtensa lying bleeding in the street for a couple more weeks and queue those for 3.5. But given they are no risk to anyone outside of xtensa, I figured to just leave them in. If you are OK with taking the xtensa fixes, then please pull to get: - one last implicit include uncovered by system.h that is in a file specific to just one powerpc defconfig. (I'd sync'd with BenH). - fix an oversight in the PCI makefile where shared code wasn't being compiled for ARCH=frv - fix a missing include for GPIO in blackfin framebuffer. - audit and tag endif in blackfin ezkit board file, in order to find and fix the misplaced endif masking a block of code. - fix irq/debug.h choice of temporary macro names to be more internal so they don't conflict with names used by xtensa. - fix a reference to an undeclared local var in xtensa's signal.c - fix an implicit bug.h usage in xtensa's asm/io.h uncovered by my removing bug.h from kernel.h - fix xtensa to properly indicate it is using asm-generic/hardirq.h in order to resolve the link error - undefined ack_bad_irq The xtensa still fails final link as my latest binutils does something evil when ld forward-relocates unlikely() blocks, but in theory people who have older/valid toolchains could now use the thing." * 'for-v3.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: xtensa: fix build fail on undefined ack_bad_irq blackfin: fix ifdef fustercluck in mach-bf538/boards/ezkit.c blackfin: fix compile error in bfin-lq035q1-fb.c pci: frv architecture needs generic setup-bus infrastructure irq: hide debug macros so they don't collide with others. xtensa: fix build error in xtensa/include/asm/io.h xtensa: fix build failure in xtensa/kernel/signal.c powerpc: fix system.h fallout in sysdev/scom.c [chroma_defconfig]
2012-04-23powerpc/mpic: Properly set default triggersBenjamin Herrenschmidt1-12/+30
This gets rid of the unused default senses array, and replaces the incorrect use of IRQ_TYPE_NONE with the new IRQ_TYPE_DEFAULT for the initial set_trigger() call when mapping an interrupt. This in turn makes us read the HW state and update the irq desc accordingly. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-04-23powerpc/mpic: Fix confusion between hw_irq and virqBenjamin Herrenschmidt1-8/+4
mpic_is_ipi() takes a virq and immediately converts it to a hw_irq. However, one of the two call sites calls it with a ... hw_irq. The other call site also happens to have the hw_irq at hand, so let's change it to just take that as an argument. Also change mpic_is_tm() for consistency. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-04-19powerpc/mpic_msgr: fix offset error when setting mer registerMingkai Hu1-1/+1
Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-04-19powerpc/mpic_msgr: add lock for MPIC message global variableMingkai Hu1-5/+5
Also fix issue of accessing invalid msgr pointer issue. The local msgr pointer in fucntion mpic_msgr_get will be accessed before getting a valid address which will cause kernel crash. Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-04-18powerpc: fix system.h fallout in sysdev/scom.c [chroma_defconfig]Paul Gortmaker1-0/+1
The following shows up in chroma_defconfig: CC arch/powerpc/sysdev/scom.o arch/powerpc/sysdev/scom.c: In function 'scom_debug_init': arch/powerpc/sysdev/scom.c:182:36: error: 'powerpc_debugfs_root' undeclared (first use in this function) arch/powerpc/sysdev/scom.c:182:36: note: each undeclared identifier is reported only once for each function it appears in make[2]: *** [arch/powerpc/sysdev/scom.o] Error 1 make[1]: *** [arch/powerpc/sysdev/scom.o] Error 2 A bisect leads to commit 9ffc93f203c18a70623f21950f1dd473c9ec48cd "Remove all #inclusions of asm/system.h" Add the debug header which contains powerpc_debugfs_root. Acked-by: David Howells <dhowells@redhat.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-04-02Merge remote-tracking branch 'kumar/next' into mergeBenjamin Herrenschmidt1-2/+20
2012-03-29powerpc/qe: Update the SNUM table for MPC8569 Rev2.0Dave Liu1-2/+20
The MPC8569 Rev2.0 has the correct SNUM table as QE Reference Manual, we must follow it. However the Rev1.0 silicon need the old SNUM table as workaround due to Rev1.0 silicon SNUM erratum. So, we support both snum table, and choose the one FDT tell us. And u-boot will fixup FDT according to SPRN_SVR. Signed-off-by: Liu Yu <yu.liu@freescale.com> Signed-off-by: Dave Liu <daveliu@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-03-28Disintegrate asm/system.h for PowerPCDavid Howells4-3/+1
Disintegrate asm/system.h for PowerPC. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> cc: linuxppc-dev@lists.ozlabs.org