summaryrefslogtreecommitdiff
path: root/arch/mips
AgeCommit message (Collapse)AuthorFilesLines
2012-12-11Merge tag 'driver-core-3.8-rc1' of ↵Linus Torvalds1-2/+0
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg Kroah-Hartman: "Here's the large driver core updates for 3.8-rc1. The biggest thing here is the various __dev* marking removals. This is going to be a pain for the merge with different subsystem trees, I know, but all of the patches included here have been ACKed by their various subsystem maintainers, as they wanted them to go through here. If this is too much of a pain, I can pull all of them out of this tree and just send you one with the other fixes/updates and then, after 3.8-rc1 is out, do the rest of the removals to ensure we catch them all, it's up to you. The merges should all be trivial, and Stephen has been doing them all in linux-next for a few weeks now quite easily. Other than the __dev* marking removals, there's nothing major here, some firmware loading updates and other minor things in the driver core. All of these have (much to Stephen's annoyance), been in linux-next for a while. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" Fixed up trivial conflicts in drivers/gpio/gpio-{em,stmpe}.c due to gpio update. * tag 'driver-core-3.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (93 commits) modpost.c: Stop checking __dev* section mismatches init.h: Remove __dev* sections from the kernel acpi: remove use of __devinit PCI: Remove __dev* markings PCI: Always build setup-bus when PCI is enabled PCI: Move pci_uevent into pci-driver.c PCI: Remove CONFIG_HOTPLUG ifdefs unicore32/PCI: Remove CONFIG_HOTPLUG ifdefs sh/PCI: Remove CONFIG_HOTPLUG ifdefs powerpc/PCI: Remove CONFIG_HOTPLUG ifdefs mips/PCI: Remove CONFIG_HOTPLUG ifdefs microblaze/PCI: Remove CONFIG_HOTPLUG ifdefs dma: remove use of __devinit dma: remove use of __devexit_p firewire: remove use of __devinitdata firewire: remove use of __devinit leds: remove use of __devexit leds: remove use of __devinit leds: remove use of __devexit_p mmc: remove use of __devexit ...
2012-12-11Merge tag 'devicetree-for-linus' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds3-9/+0
Pull device tree changes from Grant Likely: "Here are the DT changes I've got queued up for v3.8. As described below, there are a lot of bug fixes here and documentation updates but nothing major: Bug fixes, little cleanups, and documentation changes. The most invasive thing here touches a bunch of the arch directories to use a common build rule for .dtb files. There are no major changes to functionality here other than a few new helper functions." * tag 'devicetree-for-linus' of git://git.secretlab.ca/git/linux-2.6: (34 commits) arm64: Fix the dtbs target building mtd: nand: davinci: fix the binding documentation rtc: rtc-mv: Add the device tree binding documentation devicetree/bindings: Move gpio-leds binding into leds directory of/vendor-prefixes: add Imagination Technologies microblaze: use new common dtc rule c6x: use new common dtc rule openrisc: use new common dtc rule arm64: Add dtbs target for building all the enabled dtb files arm64: use new common dtc rule ARM: dt: change .dtb build rules to build in dts directory kbuild: centralize .dts->.dtb rule Fix build when CONFIG_W1_MASTER_GPIO=m b exporting "allnodes" of/spi: Honour "status=disabled" property of device of_mdio: Honour "status=disabled" property of device of_i2c: Honour "status=disabled" property of device powerpc: Fix fallout from device_node->name constification of: add 'const' for of_parse_phandle parameter *np Documentation: correct of_platform_populate() argument list script: dtc: clean generated files ...
2012-12-08Merge branch 'tip/perf/core' of ↵Ingo Molnar1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace into perf/core Pull ftrace updates from Steve Rostedt. Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-12-05MIPS: Fix endless loop when processing signals for kernel tasksDmitry Adamushko1-1/+6
The problem occurs [1] when a kernel-mode task returns from a system call with a pending signal. A real-life scenario is a child of 'khelper' returning from a failed kernel_execve() in ____call_usermodehelper() [ kernel/kmod.c ]. kernel_execve() fails due to a pending SIGKILL, which is the result of "kill -9 -1" (at least, busybox's init does it upon reboot). The loop is as follows: * syscall_exit_work: - work_pending: // start_of_the_loop - work_notifysig: - do_notify_resume() - do_signal() - if (!user_mode(regs)) return; - resume_userspace // TIF_SIGPENDING is still set - work_pending // so we call work_pending => goto // start_of_the_loop More information can be found in another LKML thread: http://www.serverphorums.com/read.php?12,457826 [1] The problem was also reproduced on !CONFIG_VM86 x86, and the following fix was accepted. http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=29a2e2836ff9ea65a603c89df217f4198973a74f Signed-off-by: Dmitry Adamushko <dmitry.adamushko@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/3571/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-12-05MIPS: R3000/R3081: Fix CPU detection.Ralf Baechle1-1/+0
Broken since e05ea74fc56f347f872ef9946d27c53e8bf20864 (lmo) rsp. cea7e2dfdef53fe55f359d00da562a268be06fd2 (kernel.org) [MIPS: Sort out CPU type to name translation.] These CPUs are no longer very popular to say the least ... Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Reported-by: Murphy McCauley <murphy.mccauley@gmail.com>
2012-12-05MIPS: N32: Fix signalfd4 syscall entry pointRalf Baechle1-1/+1
This needs to use the compat entry point or it's going to fail on big endian systems. Noticed by Al Viro. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-12-04MIPS: N32: Fix preadv(2) and pwritev(2) entry points.Ralf Baechle1-2/+2
By using the native syscall entry point the kernel was also expecting 64-bit iovec structures. This is broken since ddd9e91b71072b8ebe89311c3a44b077defa1756 [preadv/ pwritev: MIPS: Add preadv(2) and pwritev(2) syscalls.] which originally added these two syscalls. I walked through piles of code, including libc and couldn't find anything that would have worked around the issue so this change the API to what it should always have been. Noticed and patch suggested by Al Viro. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-12-04MIPS: Avoid mcheck by flushing page range in huge_ptep_set_access_flags()David Daney2-15/+15
Problem: 1) Huge page mapping of anonymous memory is initially invalid. Will be faulted in by copy-on-write mechanism. 2) Userspace attempts store at the end of the huge mapping. 3) TLB Refill exception handler fill TLB with a normal (4K sized) invalid page at the end of the huge mapping virtual address range. 4) Userspace restarted, and re-attempts the store at the end of the huge mapping. 5) Page from #3 is invalid, we get a fault and go to the hugepage fault handler. This tries to map a huge page and calls huge_ptep_set_access_flags() to install the mapping. 6) We just call the generic ptep_set_access_flags() to set up the page tables, but the flush there assumes a normal (4K sized) page and only tries to flush the first part of the huge page virtual address out of the TLB, since the existing entry from step #3 doesn't conflict, nothing is flushed. 7) We attempt to load the mapping into the TLB, but because it conflicts with the entry from step #3, we get a Machine Check exception. The fix: Flush the entire rage covered by the huge page in huge_ptep_set_access_flags(), and remove the optimization in local_flush_tlb_range() so that the flush actually does the correct thing. Signed-off-by: David Daney <david.daney@cavium.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: Hillf Danton <dhillf@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/4661/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> (cherry picked from commit dd617f258cc39d36be26afee9912624a2d23112c)
2012-11-30kbuild: centralize .dts->.dtb ruleStephen Warren3-9/+0
All architectures that use cmd_dtc do so in almost the same way. Create a central build rule to avoid duplication. The one difference is that most current uses of dtc build $(obj)/%.dtb from $(src)/dts/%.dts rather than building the .dtb in the same directory as the .dts file. This difference will be eliminated arch-by-arch in future patches. MIPS is the exception here; it already uses the exact same rule as the new common rule, so the duplicate is removed in this patch to avoid any conflict. arch/mips changes courtesy of Ralf Baechle. Update Documentation/kbuild to remove the explicit call to cmd_dtc from the example, now that the rule exists in a centralized location. Cc: Arnd Bergmann <arnd@arndb.de> Cc: linux-arm-kernel@lists.infradead.org Cc: Olof Johansson <olof@lixom.net> Cc: Russell King <linux@arm.linux.org.uk> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Jonas Bonn <jonas@southpole.se> Cc: linux@lists.openrisc.net Cc: Aurelien Jacquiot <a-jacquiot@ti.com> Cc: linux-c6x-dev@linux-c6x.org Cc: Mark Salter <msalter@redhat.com> Cc: Michal Simek <monstr@monstr.eu> Cc: microblaze-uclinux@itee.uq.edu.au Cc: Chris Zankel <chris@zankel.net> Cc: linux-xtensa@linux-xtensa.org Cc: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2012-11-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2-10/+24
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-29unify default ptrace_signal_deliverAl Viro1-2/+0
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-11-29flagday: kill pt_regs argument of do_fork()Al Viro2-3/+3
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-11-28flagday: don't pass regs to copy_thread()Al Viro1-2/+2
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-11-28Merge branches 'no-rebases', 'arch-avr32', 'arch-blackfin', 'arch-cris', ↵Al Viro11-120/+39
'arch-h8300', 'arch-m32r', 'arch-mn10300', 'arch-score', 'arch-sh' and 'arch-powerpc' into for-next
2012-11-28mips/PCI: Remove CONFIG_HOTPLUG ifdefsBill Pemberton1-2/+0
Remove conditional code based on CONFIG_HOTPLUG being false. It's always on now in preparation of it going away as an option. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Rob Herring <rob.herring@calxeda.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-26MIPS: tlbex: Better debug output.Ralf Baechle2-48/+124
Pgtable bits are assigned dynamically depending on processor feature and statically based on kernel configuration. To make sense out of the disassembled TLB exception handlers a list of the actual assignments used for a particular configuration and hardware setup can be very useful. Output the actual TLB exception handlers in a format that simplifies their post processsing from dmesg output. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-11-26MIPS: N32: Remove unused defines.Ralf Baechle1-6/+0
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-11-26MIPS: pgtable.h: Remove commented out debugging printk.Ralf Baechle1-1/+0
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-11-26MIPS: Remove R5000A.Ralf Baechle2-5/+3
From a software perspective R5000 and R5000A are the same thing which is why the symbol CPU_R5000A never got used, so finally delete it. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-11-23MIPS: Fix crash that occurs when function tracing is enabledAl Cooper1-4/+4
A recent patch changed some irq routines from inlines to functions. These routines are called by the tracer code. Now that they're functions, if they are compiled for function tracing they will call the tracer and crash the system due to infinite recursion. The fix disables tracing in these functions by using "notrace" in the function definition. Signed-off-by: Al Cooper <alcooperx@gmail.com> Reviewed-by: David Daney <david.daney@cavium.com> Pathchwork: https://patchwork.linux-mips.org/patch/4564/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-11-23MIPS: Merge overlapping bootmem rangesRalf Baechle1-6/+20
Without this, we may end up with something like this in /proc/iomem: 01100000-014fffff : System RAM 01100000-013bf48f : Kernel code 013bf490-0149e01f : Kernel data 01500000-0c0fffff : System RAM but the two System RAM ranges should be one single range. This particular case will result in kexec failure on Octeon systems if the kernel being loaded by kexec is bigger than the already running kernel. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-11-20MIPS: add default configuration for ath79Gabor Juhos1-0/+111
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/4223 Signed-off-by: John Crispin <blogic@openwrt.org>
2012-11-20MIPS: PCI: Update XLR/XLS PCI for the new PIC codeJayachandran C1-35/+34
Use the nlm_set_pic_extra_ack() call to setup the extra interrupt ACK needed by XLR PCI and XLS PCIe. Simplify the code by adding nlm_pci_link_to_irq(). Signed-off-by: Jayachandran C <jchandra@broadcom.com> Patchwork: http://patchwork.linux-mips.org/patch/4561 Signed-off-by: John Crispin <blogic@openwrt.org>
2012-11-20MIPS: BCM63XX: fix BCM6345 clocks bitsFlorian Fainelli1-7/+12
BCM6345 has an intermediate 16-bits wide test control register between the peripheral identifier register, and its clock control register is only 16-bits wide contrary to other platforms where it is 32-bits wide. By shifting all clocks bits by 16-bits to the left we ensure they get written to the proper clock control register, without adding specific BCM6345 handling in the clock code. Signed-off-by: Florian Fainelli <florian@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/4555/ Signed-off-by: John Crispin <blogic@openwrt.org>
2012-11-19treewide: fix typo of "suport" in various comments and KconfigMasanari Iida1-1/+1
Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-11-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller11-231/+478
Minor line offset auto-merges. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-16Merge branch 'arch-frv' into no-rebasesAl Viro9-25/+69
2012-11-16Merge 3.7-rc6 into usb-next.Greg Kroah-Hartman11-231/+478
This resolves a conflict with these files: drivers/usb/early/ehci-dbgp.c drivers/usb/host/ehci-ls1x.c drivers/usb/host/ohci-xls.c drivers/usb/musb/ux500.c Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-16Merge 3.7-rc6 into tty-nextGreg Kroah-Hartman11-231/+478
2012-11-16mips, arc: fix build failureDavid Rientjes1-0/+1
Using a cross-compiler to fix another issue, the following build error occurred for mips defconfig: arch/mips/fw/arc/misc.c: In function 'ArcHalt': arch/mips/fw/arc/misc.c:25:2: error: implicit declaration of function 'local_irq_disable' Fix it up by including irqflags.h. Signed-off-by: David Rientjes <rientjes@google.com> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-11-14Merge branch 'master' of ↵John W. Linville2-6/+6
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem
2012-11-13tracing,x86: Add a TSC trace_clockDavid Sharp1-0/+1
In order to promote interoperability between userspace tracers and ftrace, add a trace_clock that reports raw TSC values which will then be recorded in the ring buffer. Userspace tracers that also record TSCs are then on exactly the same time base as the kernel and events can be unambiguously interlaced. Tested: Enabled a tracepoint and the "tsc" trace_clock and saw very large timestamp values. v2: Move arch-specific bits out of generic code. v3: Rename "x86-tsc", cleanups v7: Generic arch bits in Kbuild. Google-Bug-Id: 6980623 Link: http://lkml.kernel.org/r/1352837903-32191-1-git-send-email-dhsharp@google.com Acked-by: Ingo Molnar <mingo@kernel.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@linux.intel.com> Signed-off-by: David Sharp <dhsharp@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-11-13MIPS: Malta: Fix interupt number of CBUS UART.Ralf Baechle1-1/+2
The CBUS UART's interrupt number was wrong conflicting with the interrupt being tied to the Intel PIIX4. Since the PIIX4's interrupt is registered before the CBUS UART which is not being used on most systems this would not be noticed. Attempts to open the ttyS2 CBUS UART would result in: genirq: Flags mismatch irq 18. 00000000 (serial) vs. 00010000 (XT-PIC cascade) serial_link_irq_chain: request failed: -16 for irq: 18 Qemu was written to match the kernel so will need to be fixed also. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-11-11Merge tag 'gadget-for-v3.8' of ↵Greg Kroah-Hartman2-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next USB gadget patches from Felipe: "usb: gadget: patches for v3.8 renesas_usbhs implements ->pullup() method, switches over to devm_request_irq(), adds support for DMA Engine and got a few miscelaneous cleanups. The NCM gadget got an endianness fix and the Ethernet gadget a frame size fix. We're finally removing the g_file_storage gadget and sticking to g_mass_storage and the new tcm_usb_gadget gadgets since that was a huge duplicaton of effort anyway. While removing g_file_storage, we also had to fix a bunch of defconfigs which were still pointing to the old gadget. There's a big series getting us closer to being able to introduce our configfs interface. The series converts functions into loadable modules which will, eventually, be registered to the configfs interface. Other than that there's the usual typo fixes and miscelaneous cleanups all over the place."
2012-11-11MIPS: lantiq: adds GPHY firmware loaderJohn Crispin3-0/+103
The internal GPHYs need a firmware blob to function properly. This patch adds the code needed to request the blob and load it to the PHY. Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/4523
2012-11-11MIPS: lantiq: adds code for booting GPHYJohn Crispin2-0/+39
The XRX200 family of SoCs has embedded gigabit PHYs. This patch adds code to boot them up. Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/4522
2012-11-11MIPS: lantiq: adds xrx200 ethernet clock definitionJohn Crispin1-0/+4
Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/4521
2012-11-11MIPS: lantiq: verbose init of dma coreJohn Crispin1-1/+8
Print the hardware revision and port/channel info when starting the dma core. Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/4520
2012-11-11MIPS: lantiq: fix bootselect bits on XRX200 SoCJohn Crispin1-7/+15
The XRX200 SoC family has a different register layout for reading the boot selection bits. Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/4519
2012-11-11MIPS: lantiq: unbreak devicetree initJohn Crispin1-4/+1
The bootmem was incorrectly freed resulting in lots of dangling pointers. Additionally we should use of_platform_populate() as the Documentaion tells us to do so. Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/4518
2012-11-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller8-25/+68
Conflicts: drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c Minor conflict between the BCM_CNIC define removal in net-next and a bug fix added to net. Based upon a conflict resolution patch posted by Stephen Rothwell. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-09MIPS: Loongson1B: Fix a typoKelvin Cheung1-1/+1
Fix a typo in the code. Signed-off-by: Kelvin Cheung <keguang.zhang@gmail.com> Patchwork: http://patchwork.linux-mips.org/patch/4434 Signed-off-by: John Crispin <blogic@openwrt.org>
2012-11-09MIPS: Loongson1B: Update stmmac_mdio_bus_dataKelvin Cheung1-1/+0
Update stmmac_mdio_bus_data accordingly due to the upstream change. Signed-off-by: Kelvin Cheung <keguang.zhang@gmail.com> Patchwork: http://patchwork.linux-mips.org/patch/4433 Signed-off-by: John Crispin <blogic@openwrt.org>
2012-11-09MIPS: Loongson1B: improve ls1x_serial_setup()Kelvin Cheung3-9/+7
Improve ls1x_serial_setup(). Signed-off-by: Kelvin Cheung <keguang.zhang@gmail.com> Patchwork: http://patchwork.linux-mips.org/patch/4432 Signed-off-by: John Crispin <blogic@openwrt.org>
2012-11-09MIPS: Loongson1B: use common clock infrastructure instead of private APIsKelvin Cheung4-159/+8
Use common clock infrastructure instead of private APIs. 1. Enable COMMON_CLK in the Kconfig. 2. Remove private clock APIs, which are replaced by the code in drivers/clk/clk-ls1x.c. 3. Modify header file for drivers/clk/clk-ls1x.c. Signed-off-by: Kelvin Cheung <keguang.zhang@gmail.com> Patchwork: http://patchwork.linux-mips.org/patch/4431 Signed-off-by: John Crispin <blogic@openwrt.org>
2012-11-09MIPS: Netlogic: Support for XLR/XLS Fast Message NetworkGanesan Ramalingam12-12/+1020
On XLR/XLS, the cpu cores communicate with fast on-chip devices (e.g. network accelerator, security engine etc.) using the Fast Messaging Network(FMN). The FMN queues and credits needs to be configured and intialized before it can be used. The co-processor 2 on XLR/XLS CPU cores has registers for FMN access, and the XLR/XLS has custom instructions for sending and loading messages. The FMN can deliver also per-cpu interrupts when messages are available at the CPU. This patch adds FMN initialization, adds interrupt setup and handling, and also provides support for sending and receiving FMN messages. Signed-off-by: Ganesan Ramalingam <ganesanr@broadcom.com> Signed-off-by: Jayachandran C <jchandra@broadcom.com> Patchwork: http://patchwork.linux-mips.org/patch/4468 Signed-off-by: John Crispin <blogic@openwrt.org>
2012-11-09MIPS: Netlogic: PIC IRQ handling update for multi-chipJayachandran C5-115/+103
Create struct nlm_pic_irq for interrupts handled by the PIC. This simplifies IRQ handling for multi-SoC as well as the single SoC cases. Also split the setup of percpu and PIC interrupts so that we can configure the PIC interrupts for every node. Signed-off-by: Jayachandran C <jchandra@broadcom.com> Patchwork: http://patchwork.linux-mips.org/patch/4467 Signed-off-by: John Crispin <blogic@openwrt.org>
2012-11-09MIPS: Netlogic: Make number of nodes configurableJayachandran C4-5/+90
There can be 1, 2 or 4 SoCs(nodes) in a multi-chip XLP board. Add an option for multi-chip boards in case of XLP, and make the number of nodes configurable. Signed-off-by: Jayachandran C <jchandra@broadcom.com> Patchwork: http://patchwork.linux-mips.org/patch/4470 Signed-off-by: John Crispin <blogic@openwrt.org>
2012-11-09MIPS: Netlogic: Support for multi-chip configurationJayachandran C12-86/+176
Upto 4 Netlogic XLP SoCs can be connected over ICI links to form a coherent multi-node system. Each SoC has its own set of on-chip devices including PIC. To support this, add a per SoC stucture and use it for the PIC and SYS block addresses instead of using global variables. Signed-off-by: Jayachandran C <jchandra@broadcom.com> Patchwork: http://patchwork.linux-mips.org/patch/4469 Signed-off-by: John Crispin <blogic@openwrt.org>
2012-11-09MIPS: Netlogic: Move from u32 cpumask to cpumask_tJayachandran C6-55/+86
Initial code to support more than 32 cpus. The platform CPU mask is updated from 32-bit mask to cpumask_t. Convert places that use cpu_/cpus_ functions to use cpumask_* functions. Signed-off-by: Jayachandran C <jchandra@broadcom.com> Patchwork: http://patchwork.linux-mips.org/patch/4464 Signed-off-by: John Crispin <blogic@openwrt.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-08-31 04:36:38 +0000