summaryrefslogtreecommitdiff
path: root/arch/arm/xen
AgeCommit message (Collapse)AuthorFilesLines
2012-12-13Merge tag 'stable/for-linus-3.8-rc0-tag' of ↵Linus Torvalds1-21/+102
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen Pull Xen updates from Konrad Rzeszutek Wilk: - Add necessary infrastructure to make balloon driver work under ARM. - Add /dev/xen/privcmd interfaces to work with ARM and PVH. - Improve Xen PCIBack wild-card parsing. - Add Xen ACPI PAD (Processor Aggregator) support - so can offline/ online sockets depending on the power consumption. - PVHVM + kexec = use an E820_RESV region for the shared region so we don't overwrite said region during kexec reboot. - Cleanups, compile fixes. Fix up some trivial conflicts due to the balloon driver now working on ARM, and there were changes next to the previous work-arounds that are now gone. * tag 'stable/for-linus-3.8-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen/PVonHVM: fix compile warning in init_hvm_pv_info xen: arm: implement remap interfaces needed for privcmd mappings. xen: correctly use xen_pfn_t in remap_domain_mfn_range. xen: arm: enable balloon driver xen: balloon: allow PVMMU interfaces to be compiled out xen: privcmd: support autotranslated physmap guests. xen: add pages parameter to xen_remap_domain_mfn_range xen/acpi: Move the xen_running_on_version_or_later function. xen/xenbus: Remove duplicate inclusion of asm/xen/hypervisor.h xen/acpi: Fix compile error by missing decleration for xen_domain. xen/acpi: revert pad config check in xen_check_mwait xen/acpi: ACPI PAD driver xen-pciback: reject out of range inputs xen-pciback: simplify and tighten parsing of device IDs xen PVonHVM: use E820_Reserved area for shared_info
2012-11-29xen: arm: implement remap interfaces needed for privcmd mappings.Ian Campbell1-3/+97
We use XENMEM_add_to_physmap_range which is the preferred interface for foreign mappings. Acked-by: Mukesh Rathor <mukesh.rathor@oracle.com> Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-11-29xen: arm: enable balloon driverIan Campbell1-18/+5
The code is now in a state where can just enable it. Drop the *_xenballloned_pages duplicates since these are now supplied by the balloon code. Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-11-09xen/arm: Fix compile errors when drivers are compiled as modules (export more).Stefano Stabellini1-0/+6
The commit 911dec0db4de6ccc544178a8ddaf9cec0a11d533 "xen/arm: Fix compile errors when drivers are compiled as modules." exports the neccessary functions. But to guard ourselves against out-of-tree modules and future drivers hitting this, lets export all of the relevant hypercalls. Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-11-07xen/arm: Fix compile errors when drivers are compiled as modules.Konrad Rzeszutek Wilk1-0/+5
We end up with: ERROR: "HYPERVISOR_event_channel_op" [drivers/xen/xen-gntdev.ko] undefined! ERROR: "privcmd_call" [drivers/xen/xen-privcmd.ko] undefined! ERROR: "HYPERVISOR_grant_table_op" [drivers/net/xen-netback/xen-netback.ko] undefined! and this patch exports said function (which is implemented in hypercall.S). Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Acked-by: Ian Campbell <ian.campbell@citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-10-30xen/arm: use the __HVC macroStefano Stabellini1-9/+5
Use the new __HVC macro in hypercall.S. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-10-19xen: grant: use xen_pfn_t type for frame_list.Ian Campbell1-1/+1
This correctly sizes it as 64 bit on ARM but leaves it as unsigned long on x86 (therefore no intended change on x86). The long and ulong guest handles are now unused (and a bit dangerous) so remove them. Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-08-08xen/arm: implement alloc/free_xenballooned_pages with alloc_pages/kfreeStefano Stabellini1-0/+18
Only until we get the balloon driver to work. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-09-14xen/arm: receive Xen events on ARMStefano Stabellini1-0/+33
Compile events.c on ARM. Parse, map and enable the IRQ to get event notifications from the device tree (node "/xen"). Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-09-13xen/arm: initialize grant_table on ARMStefano Stabellini1-0/+14
Initialize the grant table mapping at the address specified at index 0 in the DT under the /xen node. After the grant table is initialized, call xenbus_probe (if not dom0). Changes in v2: - introduce GRANT_TABLE_PHYSADDR; - remove unneeded initialization of boot_max_nr_grant_frames. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2012-08-08xen/arm: get privilege statusStefano Stabellini1-0/+7
Use Xen features to figure out if we are privileged. XENFEAT_dom0 was introduced by 23735 in xen-unstable.hg. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-09-14xen/arm: Xen detection and shared_info page mappingStefano Stabellini1-0/+61
Check for a node in the device tree compatible with "xen,xen", if it is present set xen_domain_type to XEN_HVM_DOMAIN and continue initialization. Map the real shared info page using XENMEM_add_to_physmap with XENMAPSPACE_shared_info. Changes in v4: - simpler parsing of Xen version in the compatible DT node. Changes in v3: - use the "xen,xen" notation rather than "arm,xen"; - add an additional check on the presence of the Xen version. Changes in v2: - replace pr_info with pr_debug. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2012-08-08xen/arm: empty implementation of grant_table arch specific functionsStefano Stabellini2-1/+54
Changes in v2: - return -ENOSYS rather than -1. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-09-14xen/arm: hypercallsStefano Stabellini2-1/+107
Use r12 to pass the hypercall number to the hypervisor. We need a register to pass the hypercall number because we might not know it at compile time and HVC only takes an immediate argument. Among the available registers r12 seems to be the best choice because it is defined as "intra-procedure call scratch register". Use the ISS to pass an hypervisor specific tag. Changes in v2: - define an HYPERCALL macro for 5 arguments hypercall wrappers, even if at the moment is unused; - use ldm instead of pop; - fix up comments. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-09-14arm: initial Xen supportStefano Stabellini2-0/+36
- Basic hypervisor.h and interface.h definitions. - Skeleton enlighten.c, set xen_start_info to an empty struct. - Make xen_initial_domain dependent on the SIF_PRIVILIGED_BIT. The new code only compiles when CONFIG_XEN is set, that is going to be added to arch/arm/Kconfig in patch #11 "xen/arm: introduce CONFIG_XEN on ARM". Changes in v3: - improve comments. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-31 18:44:20 +0000