summaryrefslogtreecommitdiff
path: root/arch/arm/mach-ux500/cpu.c
AgeCommit message (Collapse)AuthorFilesLines
2012-10-01Merge tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds1-1/+1
Pull ARM soc-specific updates from Olof Johansson: "Most notable here is probably the addition of basic support for the BCM2835, an SoC used in some of the Roku 2 players as well as the much-hyped Raspberry Pi, cleaned up and contributed by Stephen Warren. It's still early days on mainline support, with just the basics working. But it has to start somewhere! Beyond that there's some conversions of clock infrastructure on tegra to common clock, misc updates for several other platforms, and OMAP now has its own bus (under drivers/bus) to manage its devices through. This branch adds two new directories outside of arch/arm: drivers/irqchip for new irq controllers, and drivers/bus for the above OMAP bus. It's expected that some of the other platforms will migrate parts of their platforms to those directories over time as well." Fix up trivial conflicts with the clk infrastructure changes. * tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (62 commits) ARM: shmobile: add new __iomem annotation for new code ARM: LPC32xx: Support GPI 28 ARM: LPC32xx: Platform update for devicetree completion of spi-pl022 ARM: LPC32xx: Board cleanup irqchip: fill in empty Kconfig ARM: SAMSUNG: Add check for NULL in clock interface ARM: EXYNOS: Put PCM, Slimbus, Spdif clocks to off state ARM: EXYNOS: Add bus clock for FIMD ARM: SAMSUNG: Fix HDMI related warnings ARM: S3C24XX: Add .get_rate callback for "camif-upll" clock ARM: EXYNOS: Fix incorrect help text ARM: EXYNOS: Turn off clocks for NAND, OneNAND and TSI controllers ARM: OMAP: AM33xx hwmod: fixup SPI after platform_data move MAINTAINERS: add an entry for the BCM2835 ARM sub-architecture ARM: bcm2835: instantiate console UART ARM: bcm2835: add stub clock driver ARM: bcm2835: add system timer ARM: bcm2835: add interrupt controller driver ARM: add infra-structure for BCM2835 and Raspberry Pi ARM: tegra20: add CPU hotplug support ...
2012-10-01Merge tag 'fixes-non-critical' of ↵Linus Torvalds1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull non-critical ARM soc bug fixes from Olof Johansson: "These were submitted as bug fixes before v3.6 but not considered important enough to be included in it. Some of them cross over to cleanup territory as well, and aren't strictly bugfixes." * tag 'fixes-non-critical' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (48 commits) ARM: nomadik: remove NAND_NO_READRDY use ARM: pxa: fix return value check in pxa2xx_drv_pcmcia_probe() ARM: SAMSUNG: Add missing variable declaration in s3c64xx_spi1_set_platdata() ARM: S3C24XX: removes unnecessary semicolon ARM: S3C24xx: delete double assignment ARM: EXYNOS: fix address for EXYNOS4 MDMA1 ARM: EXYNOS: fixed SYSMMU setup definition to mate parameter name ARM: ep93xx: Move ts72xx.h out of include/mach ARM: ep93xx: use __iomem pointers for MMIO ARM: msm: Fix early debug uart mapping on some memory configs ARM: msm: io: Change the default static iomappings to be shared ARM: msm: io: Remove 7x30 iomap region from 7x00 ARM: msm: Remove call to missing FPGA init on 8660 ARM: OMAP4: wakeupgen: remove duplicate AUXCOREBOOT* read/write ARM: OMAP4: wakeupgen: Fix the typo in AUXCOREBOOT register save dma: tegra: make data used as *of_device_id.data const can: mpc5xxx_can: make data used as *of_device_id.data const macintosh/mediabay: make data used as *of_device_id.data const i2c/mpc: make data used as *of_device_id.data const mfd/da9052: make i2c_device_id array const ...
2012-09-06ARM: ux500: Switch to use common clock frameworkUlf Hansson1-6/+8
Remove machine specific clock implementation and switch to use new common clock framework. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-08-22ARM: ux500: set proper GIC flagsLinus Walleij1-0/+2
The Ux500 will be able to wake up on any IRQ, so flag it with IRQCHIP_SKIP_SET_WAKE, and we want to mask off the IRQs when going to suspend to avoid transient effects so also flag this with IRQCHIP_MASK_ON_SUSPEND. Cc: Etienne Carriere <etienne.carriere@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-08-09ARM: ux500: reform Ux500 family namesLinus Walleij1-1/+1
Counting the U9540 and the new U8540 as a U8500 family member does not work. Instead, split the function in two: cpu_is_u8500_family() covering U8500 and U8520 cpu_is_ux540_family() covering U9540 and U8540 This works much better in practice. Update users to keep the same behaviour. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-05-26Merge tag 'cleanup-initcall' of ↵Linus Torvalds1-0/+6
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull sweeping late_initcall cleanup for arm-soc from Olof Johansson: "This is a patch series from Shawn Guo that moves from individual late_initcalls() to using a member in the machine structure to invoke a platform's late initcalls. This cleanup is a step in the move towards multiplatform kernels since it would reduce the need to check for compatible platforms in each and every initcall." Fix up trivial conflicts in arch/arm/mach-{exynos/mach-universal_c210.c, imx/mach-cpuimx51.c, omap2/board-generic.c} due to changes nearby (and, in the case of cpuimx51.c the board support being deleted) * tag 'cleanup-initcall' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: ux500: use machine specific hook for late init ARM: tegra: use machine specific hook for late init ARM: shmobile: use machine specific hook for late init ARM: sa1100: use machine specific hook for late init ARM: s3c64xx: use machine specific hook for late init ARM: prima2: use machine specific hook for late init ARM: pnx4008: use machine specific hook for late init ARM: omap2: use machine specific hook for late init ARM: omap1: use machine specific hook for late init ARM: msm: use machine specific hook for late init ARM: imx: use machine specific hook for late init ARM: exynos: use machine specific hook for late init ARM: ep93xx: use machine specific hook for late init ARM: davinci: use machine specific hook for late init ARM: provide a late_initcall hook for platform initialization
2012-05-22Merge tag 'pinctrl' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds1-0/+12
Pull arm soc-specific pinctrl changes from Olof Johansson: "With this, five platforms are moving to the relatively new pinctrl subsystem for their pin management, replacing the older soc specific in-kernel interfaces with common code. There is quite a bit of net addition of code for each platform being added to the pinctrl subsystem. But the payback comes later when adding new boards can be done by only providing new device trees instead." Fix up trivial conflicts in arch/arm/mach-ux500/{Makefile,board-mop500.c} * tag 'pinctrl' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (61 commits) mtd: nand: gpmi: fix compile error caused by pinctrl call ARM: PRIMA2: select PINCTRL and PINCTRL_SIRF in Kconfig ARM: nomadik: enable PINCTRL_NOMADIK where needed ARM: mxs: enable pinctrl support video: mxsfb: adopt pinctrl support ASoC: mxs-saif: adopt pinctrl support i2c: mxs: adopt pinctrl support mtd: nand: gpmi: adopt pinctrl support mmc: mxs-mmc: adopt pinctrl support serial: mxs-auart: adopt pinctrl support serial: amba-pl011: adopt pinctrl support spi/imx: adopt pinctrl support i2c: imx: adopt pinctrl support can: flexcan: adopt pinctrl support net: fec: adopt pinctrl support ARM: ux500: switch MSP to using pinctrl for pins ARM: ux500: alter MSP registration to return a device pointer ARM: ux500: switch to using pinctrl for uart0 ARM: ux500: delete custom pin control system ARM: ux500: switch over to Nomadik pinctrl driver ...
2012-05-14Merge branch 'ux500/delete-u5500' into next/socArnd Bergmann1-7/+1
Conflicts: arch/arm/mach-ux500/cache-l2x0.c arch/arm/mach-ux500/clock.c arch/arm/mach-ux500/cpu.c arch/arm/mach-ux500/mbox-db5500.c arch/arm/mach-ux500/platsmp.c arch/arm/mach-ux500/timer.c Resolve lots of identical conflicts between the removal of u5500 and the addition of u8540. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-05-08ARM: ux500: use machine specific hook for late initShawn Guo1-0/+6
Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: srinidhi kasagar <srinidhi.kasagar@stericsson.com> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2012-05-02ARM: ux500: delete U5500 supportLinus Walleij1-7/+1
This platform has been obsoleted and was only available inside of ST-Ericsson, no users of this code are left in the world. This deletes the core U5500 support entirely in the same manner as the obsoleted U8500 silicon was previously deleted. The cpu_is_u5500() macros that can read out the CPU ID is left until the next kernel cycle, this makes it possible to merge deletion of dependent drivers without breakage. This also has the upside of removing the mailbox driver which was our only driver that was outside the drivers/* hiearchy, now the machine directory only handles machines and nothing else. Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Rabin Vincent <rabin.vincent@stericsson.com> Cc: Jonas Aberg <jonas.aberg@stericsson.com> Cc: Per Forlin <per.forlin@stericsson.com> Cc: Ulf Hansson <ulf.hansson@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-05-02ARM: ux500: core U9540 supportLinus Walleij1-2/+2
This adds support for the U9540 variant of the U8500 series. This is an application processor without internal modem. This is the most basic part with ASIC ID, CPU-related fixes, IRQ list, register ranges, timer, UART, and L2 cache setup. This is based on a patch by Michel Jaouen which was rewritten to fit with the latest 3.3 kernel. ChangeLog v1->v2: deleted the irqs-db9540.h file since we expect to migrate to using Device Tree for getting the IRQs to devices. ChangeLog v2->v3: introduced a fixed virtual offset for the ROM as suggested by Arnd Bergmann. Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Sebastien Pasdeloup <sebastien.pasdeloup-nonst@stericsson.com> Signed-off-by: Michel Jaouen <michel.jaouen@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-04-24drivers/gpio: gpio-nomadik: Add support for irqdomainsLee Jones1-0/+12
Add irq domain support to the gpio-nomadik GPIO driver. This enables its users to support dynamic IRQ assignment, which is requried by Device Tree. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-03-16ARM: ux500: Enable Cortex-A9 GIC (Generic Interrupt Controller) in Device TreeLee Jones1-1/+13
This enables the embedded GIC on all u8500 based hardware using DT. Acked-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-16Merge branch 'ux500/soc' into ux500/dtArnd Bergmann1-0/+75
2012-03-13ARM: ux500: convert to twd_local_timer_register() interfaceMarc Zyngier1-1/+0
Add support for the new smp_twd runtime registration interface to the ux500 platforms, and remove the old compile-time support. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-02-13ARM: ux500: export System-on-Chip information ux500 via sysfsLee Jones1-0/+75
Here we make use of the new System-On-Chip bus driver to export vital SoC information out to userspace via sysfs. This patch provides a data structure of strings to populate the base nodes found in: /sys/devices/soc[0|1|2|...]/[family|machine|revision|soc_id]. It also adds one more node as requested by ST-Ericsson. 'process' depicts the way in which the silicon was manufactured. Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2011-11-03Merge branch 'for-next' of git://git.infradead.org/users/sameo/mfd-2.6Linus Torvalds1-1/+1
* 'for-next' of git://git.infradead.org/users/sameo/mfd-2.6: (80 commits) mfd: Fix missing abx500 header file updates mfd: Add missing <linux/io.h> include to intel_msic x86, mrst: add platform support for MSIC MFD driver mfd: Expose TurnOnStatus in ab8500 sysfs mfd: Remove support for early drop ab8500 chip mfd: Add support for ab8500 v3.3 mfd: Add ab8500 interrupt disable hook mfd: Convert db8500-prcmu panic() into pr_crit() mfd: Refactor db8500-prcmu request_clock() function mfd: Rename db8500-prcmu init function mfd: Fix db5500-prcmu defines mfd: db8500-prcmu voltage domain consumers additions mfd: db8500-prcmu reset code retrieval mfd: db8500-prcmu tweak for modem wakeup mfd: Add db8500-pcmu watchdog accessor functions for watchdog mfd: hwacc power state db8500-prcmu accessor mfd: Add db8500-prcmu accessors for PLL and SGA clock mfd: Move to the new db500 PRCMU API mfd: Create a common interface for dbx500 PRCMU drivers mfd: Initialize DB8500 PRCMU regs ... Fix up trivial conflicts in arch/arm/mach-imx/mach-mx31moboard.c arch/arm/mach-omap2/board-omap3beagle.c arch/arm/mach-u300/include/mach/irqs.h drivers/mfd/wm831x-spi.c
2011-10-31Merge branch 'stericsson/cleanup' into next/timerArnd Bergmann1-69/+0
The timer and cleanup branches from stericsson conflict, so I'm merging them here. Conflicts: arch/arm/mach-ux500/Makefile arch/arm/mach-ux500/cpu.c Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2011-10-24mfd: Move to the new db500 PRCMU APIMattias Nilsson1-1/+1
Now that we have a shared API between the DB8500 and DB5500 PRCMU's, switch to using this neutral API instead. We delete the parts of db8500-prcmu.h that is now PRCMU-neutral, and calls will be diverted to respective driver. Common registers are in dbx500-prcmu-regs.h and common accessors and defines in <linux/mfd/dbx500-prcmu.h> This way we get a a lot more abstraction and code reuse. Signed-off-by: Mattias Nilsson <mattias.i.nilsson@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-09-22ARM: ux500: Move timer code to separate fileJonas Aaberg1-36/+0
Just split off the timer code to its own file so we have a more fine-grained file tree. Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-09-22ARM: ux500: add support for clocksource DBX500 PRCMUMattias Wallin1-0/+9
This patch adds support for the DBX500 PRCMU clocksource to ux500 platforms. Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.co> Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-08-30mach-ux500: factor out l2x0 handling codeLinus Walleij1-69/+0
Following mach-imx we break out the l2x0 handling into its own file, avoiding some ifdefs. Also remove unnecessary creation of local pointers when there is already one file-local readily available. Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-08-30ARM: mach-ux500: add explicit cpu_relax() for busy wait loopBarry Song1-1/+1
using cpu_relax in busy loops is a well-known idiom in the kernel. It's more for documentation purposes than technically needed here. Cc: Jamie Iles <jamie@jamieiles.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-05-24mfd: add DB5500 PRCMU driverLinus Walleij1-0/+3
This adds the DB5500 PRCMU driver. Right now this one is pretty restricted in functionality, exposing a simple interface to send I2C messages. Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-05-24mach-ux500: move the DB8500 PRCMU driver to MFDLinus Walleij1-1/+1
We have decided that this function arbiter fits better in the MFD subsystem. Since we need to concatenate the split header files we move it basically like this: mv mach-ux500/prcmu-db8500.c drivers/mfd/db8500-prcmu.c mv mach-ux500/include/mach/prcmu-defs.h include/linux/mfd/db8500-prcmu.h mv mach-ux500/include/mach/prcmu-regs.h drivers/mfd/db8500-prcmu-regs.h mach-ux500/include/mach/prcmu.h >> include/linux/mfd/db8500-prcmu.h rm arch/arm/mach-ux500/include/mach/prcmu.h Then we update different #include statements and Makefile orders etc to make the PRCMU driver compile, link and boot in the new place without really changing any code. Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-05-24mach-ux500: make PRCMU base address dynamicLinus Walleij1-0/+2
This makes the PRCMU base address be selected at runtime for U8500 and U5500 instead of being compiled-in. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-01-10ux500: dynamic SOC detectionRabin Vincent1-4/+0
Dynamically detect the DBx500 SOC an revision based on the ASIC ID. Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
2011-01-10ux500: remove build-time changing macrosRabin Vincent1-35/+39
To allow the possiblity of building U8500 and U5500 support in the same image. Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> [Rebased to latest changes in Russells tree] Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
2011-01-06Merge branch 'devel-stable' into develRussell King1-10/+3
Conflicts: arch/arm/mach-pxa/clock.c arch/arm/mach-pxa/clock.h
2010-12-14ARM: GIC: provide a single initialization function for boot CPURussell King1-2/+2
Provide gic_init() which initializes the GIC distributor and current CPU's GIC interface for the boot (or single) CPU. Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Tested-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-08ux500: Call prmcu_init only for u8500Per Forlin1-1/+2
PRCMU driver only supports u8500. Don't initialize prcmu if running on u5500. Signed-off-by: Per Forlin <per.forlin@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
2010-12-08ARM: ux500: prcmu db8500 v2 supportMattias Wallin1-0/+2
This patch adds support for db8500 chip version 2. The TCDM memory address of the PRCMU is changed and dynamic detection of that is added. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com>
2010-12-08ux500: rework device registrationRabin Vincent1-10/+0
Change the Ux500 devices to be dynamically allocated and added by calling functions instead of referencing structures, thereby allowing 5500 and other derivatives' support to be added without having to duplicate structures, use fixup functions, or use compile-time macros. Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
2010-11-21ARM: 6473/1: Small update to ux500 specific L2 cache codePer Fransson1-3/+3
This change updates the ux500 specific outer cache code to use the new *_relaxed() I/O accessors. Signed-off-by: Per Fransson <per.xx.fransson@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-10-26ARM: ux500 specific L2 cache codePer Fransson1-0/+45
The generic version of l2x0_inv_all is only called just after disabling the L2 cache and is surrounded by a spinlock. However, we're not really turning off the L2 cache right now, and the PL310 does not support exclusive accesses (used to implement the spinlock). So, the invalidation needs to be done without the spinlock. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Hans-Juergen Koch <hjk@linutronix.de> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Per Fransson <per.xx.fransson@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
2010-05-27ARM: 6145/1: ux500 MTU clockrate correctionLinus Walleij1-0/+6
This adjusts the clockrate for the MTU timer. On the different UX500 variants this rate is different. The platform can also have been set up at hardware initialization, bootloader or early init for different clock speeds. To have the clock framework available early so the timers can use them, the clock initialization for Nomadik and ux500 is moved to IRQ init time. A custom per-clock callback is added to handle special cases like this. This solves a user-visible bug: without this patch the current UX500 platforms will not be synchronized to wall-clock time and the platform will drift in time. Acked-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-04ARM: 6087/1: ux500: move sys_timer to cpu.cRabin Vincent1-0/+21
Move the common system timer setup code to cpu.c. Acked-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-04ARM: 6082/1: ux500: put common devices into devices.cRabin Vincent1-0/+10
Introduce devices.c, for placing devices common among Ux500 SoCs. Start with the PL031 device. Acked-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-04ARM: 6080/1: ux500: move irq and common maps to cpu.cRabin Vincent1-0/+68
Move IRQ initialization and common io mapping setup code to cpu.c, renaming U8500* to UX500* along the way. Acked-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-27 15:03:36 +0000