summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2009-06-09cpumask: alloc zeroed cpumask for static cpumask_var_tsYinghai Lu11-11/+11
These are defined as static cpumask_var_t so if MAXSMP is not used, they are cleared already. Avoid surprises when MAXSMP is enabled. Signed-off-by: Yinghai Lu <yinghai.lu@kernel.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-06-09cpumask: introduce zalloc_cpumask_varYinghai Lu2-0/+27
So can get cpumask_var with cpumask_clear Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-06-08async: Fix lack of boot-time console due to insufficient synchronizationLinus Torvalds1-10/+5
Our async work synchronization was broken by "async: make sure independent async domains can't accidentally entangle" (commit d5a877e8dd409d8c702986d06485c374b705d340), because it would report the wrong lowest active async ID when there was both running and pending async work. This caused things like no being able to read the root filesystem, resulting in missing console devices and inability to run 'init', causing a boot-time panic. This fixes it by properly returning the lowest pending async ID: if there is any running async work, that will have a lower ID than any pending work, and we should _not_ look at the pending work list. There were alternative patches from Jaswinder and James, but this one also cleans up the code by removing the pointless 'ret' variable and the unnecesary testing for an empty list around 'for_each_entry()' (if the list is empty, the for_each_entry() thing just won't execute). Fixes-bug: http://bugzilla.kernel.org/show_bug.cgi?id=13474 Reported-and-tested-by: Chris Clayton <chris2553@googlemail.com> Cc: Jaswinder Singh Rajput <jaswinder@kernel.org> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-08Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds9-101/+75
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: MIPS: Outline udelay and fix a few issues. MIPS: ioctl.h: Fix headers_check warnings MIPS: Cobalt: PCI bus is always required to obtain the board ID MIPS: Kconfig: Remove "Support for" from Cavium system type MIPS: Sibyte: Honor CONFIG_CMDLINE SSB: BCM47xx: Export ssb_watchdog_timer_set
2009-06-08pata_netcell: Fix typoAlan Cox1-1/+1
The previous patch submission had a I typo I didn't catch but Bartlomiej noted. Guess this proves the point about any patch being risky late in an rc Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-08Merge branch 'kvm-updates/2.6.30' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds1-0/+1
* 'kvm-updates/2.6.30' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: Explicity initialize cpus_hardware_enabled
2009-06-08Merge branch 'for-linus' of ↵Linus Torvalds1-16/+6
git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: pdc202xx_old: fix resetproc() method pdc202xx_old: fix 'pdc20246_dma_ops'
2009-06-08MIPS: Outline udelay and fix a few issues.Ralf Baechle5-92/+66
Outlining fixes the issue were on certain CPUs such as the R10000 family the delay loop would need an extra cycle if it overlaps a cacheline boundary. The rewrite also fixes build errors with GCC 4.4 which was changed in way incompatible with the kernel's inline assembly. Relying on pure C for computation of the delay value removes the need for explicit. The price we pay is a slight slowdown of the computation - to be fixed on another day. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-06-08MIPS: ioctl.h: Fix headers_check warningsJaswinder Singh Rajput1-0/+4
Make ioctl.h compatible with asm-generic/ioctl.h and userspace fix the following 'make headers_check' warning: usr/include/asm-mips/ioctl.h:64: extern's make no sense in userspace Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-06-08MIPS: Cobalt: PCI bus is always required to obtain the board IDYoichi Yuasa1-0/+1
Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-06-08MIPS: Kconfig: Remove "Support for" from Cavium system typeYoichi Yuasa1-2/+2
Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Acked-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-06-08MIPS: Sibyte: Honor CONFIG_CMDLINERalf Baechle1-7/+1
Original patch by Imre Kaloz <kaloz@openwrt.org>. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-06-08SSB: BCM47xx: Export ssb_watchdog_timer_setMatthieu Castet1-0/+1
this patch export ssb_watchdog_timer_set to allow to use it in a Linux watchdog driver. Signed-off-by: Matthieu CASTET <castet.matthieu@free.fr> Acked-by : Michael Buesch <mb@bu3sch.de> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-06-08Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds11-24/+53
* master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] 5543/1: arm: serial amba: add missing declaration in serial.h [ARM] pxa: fix pxa27x_udc default pullup GPIO [ARM] pxa/imote2: fix UCAM sensor board ADC model number mx[23]: don't put clock lookups in __initdata fix oops when using console=ttymxcN with N > 0 [ARM] ARMv7 errata: only apply fixes when running on applicable CPU [ARM] 5534/1: kmalloc must return a cache line aligned buffer
2009-06-08Merge branch 'for-linus' of ↵Linus Torvalds5-15/+80
git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc: sdhci-of: Fix the wrong accessor to HOSTVER register mvsdio: fix config failure with some high speed SDHC cards mvsdio: ignore high speed timing requests from the core mmc/omap: Use disable_irq_nosync() from within irq handlers. sdhci-of: Add fsl,esdhc as a valid compatible to bind against mvsdio: allow automatic loading when modular mxcmmc: Fix missing return value checking in DMA setup code. mxcmmc : Reset the SDHC hardware if software timeout occurs. omap_hsmmc: Trivial fix for a typo in comment mxcmmc: decrease minimum frequency to make MMC cards work
2009-06-08KVM: Explicity initialize cpus_hardware_enabledAvi Kivity1-0/+1
Under CONFIG_MAXSMP, cpus_hardware_enabled is allocated from the heap and not statically initialized. This causes a crash on reboot when kvm thinks vmx is enabled on random nonexistent cpus and accesses nonexistent percpu lists. Fix by explicitly clearing the variable. Cc: stable@kernel.org Reported-and-tested-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-07[ARM] 5543/1: arm: serial amba: add missing declaration in serial.hAlessandro Rubini1-0/+1
This header is sometimes included in the uncompress stage to get register values, but no <linux/amba/bus.h> can be included there. So declare "struct amba_device" here before using it in a prototype. Signed-off-by: Alessandro Rubini <rubini@unipv.it> Acked-by: Andrea Gallo <andrea.gallo@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-06-07pdc202xx_old: fix resetproc() methodSergei Shtylyov1-14/+5
pdc202xx_reset() calls pdc202xx_reset_host() twice, for both channels, while that function actually twiddles the single, shared software reset bit -- the net effect is a duplicated reset and horrendous 4 second delay happening not only on a channel reset but also when dma_lost_irq() and dma_clear() methods are called. Fold pdc202xx_reset_host() into pdc202xx_reset(), fix printk(), and move it before the actual reset... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-06-07pdc202xx_old: fix 'pdc20246_dma_ops'Sergei Shtylyov1-2/+1
Commit ac95beedf8bc97b24f9540d4da9952f07221c023 (ide: add struct ide_port_ops (take 2)) erroneously converted the driver's dma_timeout() and dma_lost_irq() methods to call the driver's resetproc() method regardless of whether it was defined for this specific controller while it hadn't been defined and hence called for PDC20246. So the dma_clear() method, the successor of dma_timeout(), shouldn't exist and the dma_lost_irq() method should be standard for PDC20246. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-06-06Merge branch 'for-linus' of ↵Linus Torvalds2-3/+5
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: x86/pci: fix mmconfig detection with 32bit near 4g PCI: use fixed-up device class when configuring device
2009-06-06integrity: fix IMA inode leakHugh Dickins1-0/+1
CONFIG_IMA=y inode activity leaks iint_cache and radix_tree_node objects until the system runs out of memory. Nowhere is calling ima_inode_free() a.k.a. ima_iint_delete(). Fix that by calling it from destroy_inode(). Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-06Merge branch 'for-linus' of ↵Linus Torvalds2-6/+27
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: ext3/4 with synchronous writes gets wedged by Postfix Fix nobh_truncate_page() to not pass stack garbage to get_block()
2009-06-06Merge branch 'upstream-linus2' of ↵Linus Torvalds1-6/+11
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus2' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: [libata] pata_ali: Use IGN_SIMPLEX
2009-06-06ext3/4 with synchronous writes gets wedged by PostfixAl Viro1-6/+25
OK, that's probably the easiest way to do that, as much as I don't like it... Since iget() et.al. will not accept I_FREEING (will wait to go away and restart), and since we'd better have serialization between new/free on fs data structures anyway, we can afford simply skipping I_FREEING et.al. in insert_inode_locked(). We do that from new_inode, so it won't race with free_inode in any interesting ways and it won't race with iget (of any origin; nfsd or in case of fs corruption a lookup) since both still will wait for I_LOCK. Reviewed-by: "Theodore Ts'o" <tytso@mit.edu> Acked-by: Jan Kara <jack@suse.cz> Tested-by: David Watson <dbwatson@ukfsn.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-06-06Fix nobh_truncate_page() to not pass stack garbage to get_block()Theodore Ts'o1-0/+2
The nobh_truncate_page() function is used by ext2, exofs, and jfs. Of these three, only ext2 and jfs's get_block() function pays attention to bh->b_size --- which is normally always the filesystem blocksize except when the get_block() function is called by either mpage_readpage(), mpage_readpages(), or the direct I/O routines in fs/direct_io.c. Unfortunately, nobh_truncate_page() does not initialize map_bh before calling the filesystem-supplied get_block() function. So ext2 and jfs will try to calculate the number of blocks to map by taking stack garbage and shifting it left by inode->i_blkbits. This should be *mostly* harmless (except the filesystem will do some unnneeded work) unless the stack garbage is less than filesystem's blocksize, in which case maxblocks will be zero, and the attempt to find out whether or not the filesystem has a hole at a given logical block will fail, and the page cache entry might not get zero'ed out. Also if the stack garbage in in map_bh->state happens to have the BH_Mapped bit set, there could be an attempt to call readpage() on a non-existent page, which could cause nobh_truncate_page() to return an error when it should not. Fix this by initializing map_bh->state and map_bh->size. Fortunately, it's probably fairly unlikely that ext2 and jfs users mount with nobh these days. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Cc: Dave Kleikamp <shaggy@linux.vnet.ibm.com> Cc: linux-fsdevel@vger.kernel.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-06-05[libata] pata_ali: Use IGN_SIMPLEXAlan Cox1-6/+11
Some ALi devices report simplex if they have been disabled and re-enabled, and restoring the byte does not work. Ignore it - the needed supporting logic is already present for the SATA ULi ports. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-06-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstableLinus Torvalds2-3/+49
* git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable: Btrfs: Fix oops and use after free during space balancing Btrfs: set device->total_disk_bytes when adding new device
2009-06-05mtd: davinci nand: update clock namingKevin Hilman1-3/+4
DaVinci clock support has been updated in mainline. Update clock names accordingly. Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-05Merge branch 'upstream-linus' of ↵Linus Torvalds4-9/+91
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: ata_piix: Add HP Compaq nc6000 to the broken poweroff list ahci: add warning messages for hp laptops with broken suspend pata_efar: fix PIO2 underclocking pata_legacy: wait for async probing
2009-06-05ata_piix: Add HP Compaq nc6000 to the broken poweroff listVille Syrjala1-0/+9
HP Compaq nc6000 suffers from the double disk spindown issue. Add it to the broken poweroff DMI list. Signed-off-by: Ville Syrjala <syrjala@sci.fi> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-06-05ahci: add warning messages for hp laptops with broken suspendTejun Heo1-0/+72
Harddisks on HP dv[4-6] and HDX18 fail to come online after resume on earlier BIOSen. Fortunately, HP recently released BIOS updates for all machines to fix the issue. Detect old BIOSen, warn the user to update BIOS on boot and suspend attempts and fail suspend. Kudos to all the bug reporters. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: kernel.org@epperson.homelinux.net Cc: emisca@gmail.com Cc: Gadi Cohen <dragon@wastelands.net> Cc: Paul Swanson <paul@procursa.com> Cc: s@ourada.org Cc: Trevor Davenport <trevor.davenport@gmail.com> Cc: corruptor1972 <steven_tierney@yahoo.co.uk> Cc: Victoria Wilson <mail@vwilson.co.uk> Cc: khiraly <khiraly.list@gmail.com> Cc: Sean <wollombi@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-06-05pata_efar: fix PIO2 underclockingSergei Shtylyov1-9/+8
Fix the PIO mode 2 using mode 0 timings -- this driver should enable the fast timing bank starting with PIO2, just like the PIIX/ICH drivers do. Also, fix/rephrase some comments while at it. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-06-05pata_legacy: wait for async probingJames Bottomley1-0/+2
The basic problem here that pata_legacy attaches the host, sees if it found any devices and detaches it if none were found. With async probing, it's not waiting until discovery is finished before deciding it has no devices and trying the detach leading to this warning: ata1: PATA max PIO4 cmd 0x1f0 ctl 0x3f6 irq 14 ------------[ cut here ]------------ WARNING: at drivers/ata/libata-core.c:6222 ata_host_detach+0x75/0x90() Modules linked in: Pid: 1, comm: swapper Not tainted 2.6.30-rc7 #1 Call Trace: [<c01fbb05>] ? ata_host_detach+0x75/0x90 [<c01fbb05>] ? ata_host_detach+0x75/0x90 [<c01139b5>] ? warn_slowpath_common+0x45/0x80 [<c01139fa>] ? warn_slowpath_null+0xa/0x10 [<c01fbb05>] ? ata_host_detach+0x75/0x90 [<c02f40e0>] ? legacy_init+0x44e/0x87f [<c02f3c92>] ? legacy_init+0x0/0x87f [<c0101021>] ? _stext+0x21/0x140 [<c01890ff>] ? proc_register+0x2f/0x190 [<c018938c>] ? create_proc_entry+0x5c/0xc0 [<c0135ebe>] ? register_irq_proc+0x6e/0x90 [<c02e6484>] ? kernel_init+0x6e/0xbf [<c02e6416>] ? kernel_init+0x0/0xbf [<c01031d7>] ? kernel_thread_helper+0x7/0x10 ---[ end trace ef1ee36e873ae3a0 ]--- Because it detaches before the probe is complete. One way to fix it would be to put an async_synchronize_full() before looking for devices, which this patch does. A better way might be to separate libata into its own domain and only wait for that. Reported-by: Mikael Pettersson <mikpe@it.uu.se> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-06-05Merge branch 'fixes' of ↵Linus Torvalds1-6/+7
git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq: [CPUFREQ] powernow-k8: check space_id of _PCT registers to be FFH
2009-06-05[CPUFREQ] powernow-k8: check space_id of _PCT registers to be FFHDave Jones1-6/+7
The powernow-k8 driver checks to see that the Performance Control/Status Registers are declared as FFH (functional fixed hardware) by the BIOS. However, this check got broken in the commit: 0e64a0c982c06a6b8f5e2a7f29eb108fdf257b2f [CPUFREQ] checkpatch cleanups for powernow-k8 Fix based on an original patch from Naga Chumbalkar. Signed-off-by: Naga Chumbalkar <nagananda.chumbalkar@hp.com> Cc: Mark Langsdorf <mark.langsdorf@amd.com> Signed-off-by: Dave Jones <davej@redhat.com>
2009-06-05Revert "drm: don't associate _DRM_DRIVER maps with a master"Linus Torvalds1-2/+1
This reverts commit 6c51d1cfa0a370b48a157163340190cf5fd2346b, which apparently causes DRI initialization failures on Radeons. Reported-by: Markus Trippelsdorf <markus@trippelsdorf.de> Requested-by: Dave Airlie <airlied@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-05ivtv: Fix PCI DMA directionAlan Cox1-1/+2
The ivtv stream buffers may be for receive or for send but the attached sg handle is always destined cpu->device. We flush it correctly but the allocation is wrongly done with the same type as the buffers. See bug: http://bugzilla.kernel.org/show_bug.cgi?id=13385 (Note this doesn't close the bug - it fixes the ivtv part and in turn the logging next shows up some rather alarming DMA sg list warnings in libata) Signed-off-by: Alan Cox <alan@linux.intel.com> Acked-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-04ptrace: revert "ptrace_detach: the wrong wakeup breaks the ERESTARTxxx logic"Oleg Nesterov1-0/+2
Commit 95a3540da9c81a5987be810e1d9a83640a366bd5 ("ptrace_detach: the wrong wakeup breaks the ERESTARTxxx logic") removed the "extra" wake_up_process() from ptrace_detach(), but as Jan pointed out this breaks the compatibility. I believe the changelog is right and this wake_up() is wrong in many ways, but GDB assumes that ptrace(PTRACE_DETACH, child, 0, 0) always wakes up the tracee. Despite the fact this breaks SIGNAL_STOP_STOPPED/group_stop_count logic, and despite the fact this wake_up_process() can break another assumption: PTRACE_DETACH with SIGSTOP should leave the tracee in TASK_STOPPED case. Because the untraced child can dequeue SIGSTOP and call do_signal_stop() before ptrace_detach() calls wake_up_process(). Revert this change for now. We need some fixes even if we we want to keep the current behaviour, but these fixes are not for 2.6.30. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Roland McGrath <roland@redhat.com> Cc: Jan Kratochvil <jan.kratochvil@redhat.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-04kbuild: fix detection of CONFIG_FRAME_WARN=0Mike Frysinger1-1/+1
The checking of CONFIG_FRAME_WARN in the top level Makefile forgot to actually derefence the variable thus leading to an always true check. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Cc: Andi Kleen <ak@suse.de> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-04ptrace: tracehook_report_clone: fix false positivesOleg Nesterov2-7/+6
The "trace || CLONE_PTRACE" check in tracehook_report_clone() is not right, - If the untraced task does clone(CLONE_PTRACE) the new child is not traced, we must not queue SIGSTOP. - If we forked the traced task, but the tracer exits and untraces both the forking task and the new child (after copy_process() drops tasklist_lock), we should not queue SIGSTOP too. Change the code to check task_ptrace() != 0 instead. This is still racy, but the race is harmless. We can race with another tracer attaching to this child, or the tracer can exit and detach in parallel. But giwen that we didn't do wake_up_new_task() yet, the child must have the pending SIGSTOP anyway. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Roland McGrath <roland@redhat.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-04Merge branch 'for-linus' of ↵Linus Torvalds1-3/+0
git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel: drm/i915: Remove a bad BUG_ON in the fence management code.
2009-06-04Merge branch 'drm-fixes' of ↵Linus Torvalds17-32/+151
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm: ignore EDID with really tiny modes. drm: don't associate _DRM_DRIVER maps with a master drm/i915: intel_lvds.c fix section mismatch drm: Hook up DPMS property handling in drm_crtc.c. Add drm_helper_connector_dpms. drm: set permissions on edid file to 0444 drm: add newlines to text sysfs files drm/radeon: fix ring free alignment calculations drm: fix irq naming for kms drivers.
2009-06-04drivers/char/mem.c: avoid OOM lockup during large reads from /dev/zeroSalman Qazi1-0/+3
While running 20 parallel instances of dd as follows: #!/bin/bash for i in `seq 1 20`; do dd if=/dev/zero of=/export/hda3/dd_$i bs=1073741824 count=1 & done wait on a 16G machine, we noticed that rather than just killing the processes, the entire kernel went down. Stracing dd reveals that it first does an mmap2, which makes 1GB worth of zero page mappings. Then it performs a read on those pages from /dev/zero, and finally it performs a write. The machine died during the reads. Looking at the code, it was noticed that /dev/zero's read operation had been changed by 557ed1fa2620dc119adb86b34c614e152a629a80 ("remove ZERO_PAGE") from giving zero page mappings to actually zeroing the page. The zeroing of the pages causes physical pages to be allocated to the process. But, when the process exhausts all the memory that it can, the kernel cannot kill it, as it is still in the kernel mode allocating more memory. Consequently, the kernel eventually crashes. To fix this, I propose that when a fatal signal is pending during /dev/zero read operation, we simply return and let the user process die. Signed-off-by: Salman Qazi <sqazi@google.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> [ Modified error return and comment trivially. - Linus] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-04Btrfs: Fix oops and use after free during space balancingChris Mason1-3/+48
The btrfs allocator uses list_for_each to walk the available block groups when searching for free blocks. It starts off with a hint to help find the best block group for a given allocation. The hint is resolved into a block group, but we don't properly check to make sure the block group we find isn't in the middle of being freed due to filesystem shrinking or balancing. If it is being freed, the list pointers in it are bogus and can't be trusted. But, the code happily goes along and uses them in the list_for_each loop, leading to all kinds of fun. The fix used here is to check to make sure the block group we find really is on the list before we use it. list_del_init is used when removing it from the list, so we can do a proper check. The allocation clustering code has a similar bug where it will trust the block group in the current free space cluster. If our allocation flags have changed (going from single spindle dup to raid1 for example) because the drives in the FS have changed, we're not allowed to use the old block group any more. The fix used here is to check the current cluster against the current allocation flags. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-06-04lguest: fix 'unhandled trap 13' with CONFIG_CC_STACKPROTECTORRusty Russell2-4/+14
We don't set up the canary; let's disable stack protector on boot.c so we can get into lguest_init, then set it up. As a side effect, switch_to_new_gdt() sets up %fs for us properly too. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-04Merge branch 'fix' of ↵Russell King2-2/+5
git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6
2009-06-04Btrfs: set device->total_disk_bytes when adding new deviceYan Zheng1-0/+1
It was not being properly initialized, and so the size saved to disk was not correct. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-06-04drm/i915: Remove a bad BUG_ON in the fence management code.Eric Anholt1-3/+0
This could be triggered by a gtt mapping fault on 965 that decides to remove the fence from another object that happens to be active currently. Since the other object doesn't rely on the fence reg for its execution, we don't wait for it to finish. We'll soon be not waiting on 915 most of the time as well, so just drop the BUG_ON. Signed-off-by: Eric Anholt <eric@anholt.net>
2009-06-04Merge branch 'for-rmk' of git://git.pengutronix.de/git/imx/linux-2.6Russell King18-116/+272
2009-06-04x86/pci: fix mmconfig detection with 32bit near 4gYinghai Lu1-3/+3
Pascal reported and bisected a commit: | x86/PCI: don't call e820_all_mapped with -1 in the mmconfig case which broke one system system. ACPI: Using IOAPIC for interrupt routing PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 255 PCI: MCFG area at f0000000 reserved in ACPI motherboard resources PCI: Using MMCONFIG for extended config space it didn't have PCI: updated MCFG configuration 0: base f0000000 segment 0 buses 0 - 63 anymore, and try to use 0xf000000 - 0xffffffff for mmconfig For 32bit, mcfg_res->end could be 32bit only (if 64 resources aren't used) So use end - 1 to pass the value in mcfg->end to avoid overflow. We don't need to worry about the e820 path, they are always 64 bit. Reported-by: Pascal Terjan <pterjan@mandriva.com> Bisected-by: Pascal Terjan <pterjan@mandriva.com> Tested-by: Pascal Terjan <pterjan@mandriva.com> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Cc: stable@kernel.org Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-19 22:41:40 +0000