summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2007-10-12[ARM] Add rtc-cmos driver for ISA-based footbridge platformsRussell King1-1/+44
... but the rtc-cmos is rather broken; if PNP is enabled, it assumes that we have ACPI (!) which is quite bogus on these platforms - which may have ISAPNP but not ACPI. Something to be solved in the future. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-10-12[ARM] Add fallocate syscall entryRussell King2-0/+2
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-10-12[ARM] 4588/1: S3C2412: Sleep configuration updatesBen Dooks1-2/+8
Make the S3C2412 sleep configuration clearer. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-10-12[ARM] 4587/1: S3C24XX: Add magic number before resume codeBen Dooks1-0/+8
Add a magic number before the resume code so that a bootloader can check that there is an image to resume to. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-10-12[ARM] 4586/1: S3C2412: power register updatesBen Dooks2-0/+7
Add the INFORM register block which are retained over sleep. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-10-12[ARM] 4585/1: Correctly identify the CPU architecture versionCatalin Marinas1-4/+17
The cpu_architecture() function in arch/arm/kernel/setup.c only works with cores produced by ARM Ltd. The more generic approach is to read the ID_MMFR0 register and check for the VMSA or PMSA version supported. With this patch, the ARM11MPCore would be reported as ARMv7 since its MMU is compatible with ARMv7. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-10-12[ARM] 4581/1: Fix the conditional execution of the NWFPE instructionsCatalin Marinas1-11/+14
Starting with ARMv7-A, conditional execution of undefined instructions can trigger an exception even if the condition check fails. This patch modifies the NWFPE support to check the condition before emulating the instruction. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-10-12[ARM] unbalanced parenthesis fixMariusz Kozlowski1-2/+2
Fix unbalanced parenthesis. Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-10-12[ARM] cleanup struct irqaction initializersThomas Gleixner1-1/+5
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-10-12[ARM] omap1/leds-innovator.c: remove dead codeAdrian Bunk1-3/+0
This patch removes dead code. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-10-12[ARM] "extern inline" -> "static inline"Adrian Bunk3-8/+8
"extern inline" will have different semantics with gcc 4.3. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-10-12[ARM] 4539/1: clocksource and clockevents for at91rm9200David Brownell2-65/+132
GENERIC_TIME and GENERIC_CLOCKEVENTS support for the at91rm9200. - Oneshot mode (used for NO_HZ and high res timers) uses the alarm to emulate a real oneshot timer; the trickiest bit is how to avoid some lowlevel races. Thanks to Remy Bohmer for various fixes to this code. - Tighten up periodic mode support using the PIT. - Streamline reads of the 32KHz counter. Thanks to Marc Pignat for some testing results: the CRTR register has *very* odd behavior. The reread appears to work around stranger glitches than just getting an old clock value (which would quickly self-correct). - Remove the rounding-up of tick_usec to 10.009 msec (32KiHz/100), since that no longer acts correct (time increases too fast). Note that the at91sam9 and at91x40 chips need other solutions, since they don't have the same system timer module. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Bill Gatliff <bgat@billgatliff.com> Acked-by:Remy Bohmer <linux@bohmer.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-10-12[ARM] 4566/1: s3c24xx: fix dma functions section mismatchKrzysztof Helt5-5/+5
This patch removes section mismatches related to DMA functions. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Acked-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-10-12[ARM] 4565/1: s3c2443: fix section mismatch in irq.c fileKrzysztof Helt1-2/+2
This patch removes section mismatches related to irq functions. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Acked-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-10-12[ARM] 4564/1: Add tagged list support for Acorn RiscPC's uncompress codeAlan Hourihane1-15/+57
arch_decomp_setup() does not understand the new tagged lists for parameter setup. It's fixed in using the older param struct. This patch adds support for tagged lists and allows the older param struct too. Signed-off-by: Alan Hourihane <alanh@fairlite.demon.co.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-10-12[ARM] 4545/1: ns9xxx: simplify irq ack'ingUwe Kleine-König2-33/+14
Now the drivers are responsible to clear the irq in the respective device, which seems to be the normal thing to do. So the ack'ing of the timer irq moved to time.c. Signed-off-by: Uwe Kleine-König <ukleinek@informatik.uni-freiburg.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-10-12[ARM] 4536/1: configure support for AT91x40 and EB01Greg Ungerer1-0/+23
Configuration support for the AT91x40 CPU and EB01 board. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-10-12[ARM] 4537/1: build support for AT91x40 and EB01Greg Ungerer1-1/+4
Makefile build support for the Atmel AT91x40 CPU and EB01 board support. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-10-12[ARM] 4538/1: Atmel EB01 board supportGreg Ungerer1-0/+44
Support for the Atmel EB01 board (based on the Atmel AT91x40 CPU). Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-10-12[ARM] 4535/1: AT91x40 function prototypesGreg Ungerer1-0/+3
Prototypes for the at91x40 CPU support functions. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-10-12[ARM] 4534/1: AT91x40 interrupt supportGreg Ungerer1-0/+67
Interrupt setup support for the Atmel AT91x40 CPU family. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-10-12[ARM] 4533/1: AT91x40 timer supportGreg Ungerer1-0/+80
Support for the timers in the Atmel AT91x40 family of CPUs. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-10-12[ARM] 4532/1: allow configuration of processor IDGreg Ungerer1-1/+1
Allow for configuration of the processor ID for the simplar non-MMU ARM parts. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-10-11Merge branch 'master' of ↵Linus Torvalds529-13476/+31125
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc * 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (408 commits) [POWERPC] Add memchr() to the bootwrapper [POWERPC] Implement logging of unhandled signals [POWERPC] Add legacy serial support for OPB with flattened device tree [POWERPC] Use 1TB segments [POWERPC] XilinxFB: Allow fixed framebuffer base address [POWERPC] XilinxFB: Add support for custom screen resolution [POWERPC] XilinxFB: Use pdata to pass around framebuffer parameters [POWERPC] PCI: Add 64-bit physical address support to setup_indirect_pci [POWERPC] 4xx: Kilauea defconfig file [POWERPC] 4xx: Kilauea DTS [POWERPC] 4xx: Add AMCC Kilauea eval board support to platforms/40x [POWERPC] 4xx: Add AMCC 405EX support to cputable.c [POWERPC] Adjust TASK_SIZE on ppc32 systems to 3GB that are capable [POWERPC] Use PAGE_OFFSET to tell if an address is user/kernel in SW TLB handlers [POWERPC] 85xx: Enable FP emulation in MPC8560 ADS defconfig [POWERPC] 85xx: Killed <asm/mpc85xx.h> [POWERPC] 85xx: Add cpm nodes for 8541/8555 CDS [POWERPC] 85xx: Convert mpc8560ads to the new CPM binding. [POWERPC] mpc8272ads: Remove muram from the CPM reg property. [POWERPC] Make clockevents work on PPC601 processors ... Fixed up conflict in Documentation/powerpc/booting-without-of.txt manually.
2007-10-11Merge branch 'upstream-fixes' of ↵Linus Torvalds1-9/+18
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-fixes' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: [libata] sata_mv: more S/G fixes
2007-10-12[libata] sata_mv: more S/G fixesJeff Garzik1-9/+18
* corruption fix: we only want the lower 16 bits of length (0 == 64kb) * ditto: the upper layer sets max-phys-segments to LIBATA_MAX_PRD, so we must reset it to own hw-specific length. * delete unused mv_fill_sg() return value Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2007-10-11JFS: fix bio-related build breakageJeff Garzik1-6/+1
Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-12[POWERPC] Add memchr() to the bootwrapperDavid Gibson2-0/+14
This adds a memchr() implementation to the bootwrapper, which will be needed when libfdt is merged in. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-10-12[POWERPC] Implement logging of unhandled signalsOlof Johansson5-2/+71
Implement show_unhandled_signals sysctl + support to print when a process is killed due to unhandled signals just as i386 and x86_64 does. Default to having it off, unlike x86 that defaults on. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-10-12[POWERPC] Add legacy serial support for OPB with flattened device treeValentine Barshak1-2/+3
Currently find_legacy_serial_ports() can find no serial ports on the OPB with flattened device tree. Thus no legacy boot console can be initialized. Just the early udbg console works, which is initialized with udbg_init_44x_as1 on the UART's physical address specified in kernel config. This happens because we look for ns16750 serial devices only and expect opb node to have a device type property. This patch makes it look for ns16550-compatible devices and use of_device_is_compatible() for opb in case device type is not specified. Signed-off-by: Valentine Barshak <vbarshak@ru.mvista.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-10-12[POWERPC] Use 1TB segmentsPaul Mackerras23-258/+513
This makes the kernel use 1TB segments for all kernel mappings and for user addresses of 1TB and above, on machines which support them (currently POWER5+, POWER6 and PA6T). We detect that the machine supports 1TB segments by looking at the ibm,processor-segment-sizes property in the device tree. We don't currently use 1TB segments for user addresses < 1T, since that would effectively prevent 32-bit processes from using huge pages unless we also had a way to revert to using 256MB segments. That would be possible but would involve extra complications (such as keeping track of which segment size was used when HPTEs were inserted) and is not addressed here. Parts of this patch were originally written by Ben Herrenschmidt. Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-10-12[POWERPC] XilinxFB: Allow fixed framebuffer base addressGrant Likely2-6/+21
Allow a fixed framebuffer address to be assigned to the framebuffer device instead of allocating the framebuffer from the consistent memory pool. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-10-12[POWERPC] XilinxFB: Add support for custom screen resolutionGrant Likely2-28/+49
Some custom implementations of the xilinx fb can use resolutions other than 640x480. This patch allows the resolution to be specified in the device tree or the xilinx_platform_data structure. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-10-12[POWERPC] XilinxFB: Use pdata to pass around framebuffer parametersGrant Likely1-20/+23
The call to xilinxfb_assign is getting unwieldy when adding features to the Xilinx framebuffer driver. Change xilinxfb_assign() to accept a pointer to a xilinxfb_platform_data structure to prepare for adding additition configuration options. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-10-12[POWERPC] PCI: Add 64-bit physical address support to setup_indirect_pciValentine Barshak2-3/+6
Add 64-bit physical address support to setup_indirect_pci(). Signed-off-by: Valentine Barshak <vbarshak@ru.mvista.com> Acked-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-10-11Merge branch 'for-linus' of ↵Linus Torvalds89-1710/+2498
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (87 commits) mlx4_core: Fix section mismatches IPoIB: Allow setting policy to ignore multicast groups IB/mthca: Mark error paths as unlikely() in post_srq_recv functions IB/ipath: Minor fix to ordering of freeing and zeroing of tid pages. IB/ipath: Remove redundant link state checks IB/ipath: Fix IB_EVENT_PORT_ERR event IB/ipath: Better handling of unexpected GPIO interrupts IB/ipath: Maintain active time on all chips IB/ipath: Fix QHT7040 serial number check IB/ipath: Indicate a couple of chip bugs to userspace IB/ipath: iba6110 rev4 no longer needs recv header overrun workaround IB/ipath: Use counters in ipath_poll and cleanup interrupts in ipath_close IB/ipath: Remove duplicate copy of LMC IB/ipath: Add ability to set the LMC via the sysfs debugging interface IB/ipath: Optimize completion queue entry insertion and polling IB/ipath: Implement IB_EVENT_QP_LAST_WQE_REACHED IB/ipath: Generate flush CQE when QP is in error state IB/ipath: Remove redundant code IB/ipath: Future proof eeprom checksum code (contents reading) IB/ipath: UC RDMA WRITE with IMMEDIATE doesn't send the immediate ...
2007-10-11Merge branch 'master' of ↵Linus Torvalds1247-44341/+204066
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6 * 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (867 commits) [SKY2]: status polling loop (post merge) [NET]: Fix NAPI completion handling in some drivers. [TCP]: Limit processing lost_retrans loop to work-to-do cases [TCP]: Fix lost_retrans loop vs fastpath problems [TCP]: No need to re-count fackets_out/sacked_out at RTO [TCP]: Extract tcp_match_queue_to_sack from sacktag code [TCP]: Kill almost unused variable pcount from sacktag [TCP]: Fix mark_head_lost to ignore R-bit when trying to mark L [TCP]: Add bytes_acked (ABC) clearing to FRTO too [IPv6]: Update setsockopt(IPV6_MULTICAST_IF) to support RFC 3493, try2 [NETFILTER]: x_tables: add missing ip6t_modulename aliases [NETFILTER]: nf_conntrack_tcp: fix connection reopening [QETH]: fix qeth_main.c [NETLINK]: fib_frontend build fixes [IPv6]: Export userland ND options through netlink (RDNSS support) [9P]: build fix with !CONFIG_SYSCTL [NET]: Fix dev_put() and dev_hold() comments [NET]: make netlink user -> kernel interface synchronious [NET]: unify netlink kernel socket recognition [NET]: cleanup 3rd argument in netlink_sendskb ... Fix up conflicts manually in Documentation/feature-removal-schedule.txt and my new least favourite crap, the "mod_devicetable" support in the files include/linux/mod_devicetable.h and scripts/mod/file2alias.c. (The latter files seem to be explicitly _designed_ to get conflicts when different subsystems work with them - that have an absolutely horrid lack of subsystem separation!) Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-11Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds436-10331/+14483
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (80 commits) [MIPS] tlbex.c: Cleanup __init usage. [MIPS] WRPPMC serial support move to platform device [MIPS] R1: Fix hazard barriers to make kernels work on R2 also. [MIPS] VPE: reimplement ELF loader. [MIPS] cleanup WRPPMC include files [MIPS] Add BUG_ON assertion for attempt to run kernel on the wrong CPU type. [MIPS] SMP: Use ISO C struct initializer for local structs. [MIPS] SMP: Kill useless casts. [MIPS] Kill num_online_cpus() loops. [MIPS] SMP: Implement smp_call_function_mask(). [MIPS] Make facility to convert CPU types to strings generally available. [MIPS] Convert list of CPU types from #define to enum. [MIPS] Optimize get_unaligned / put_unaligned implementations. [MIPS] checkfiles: Fix "need space after that ','" errors. [MIPS] Fix "no space between function name and open parenthesis" warnings. [MIPS] Allow hardwiring of the CPU type to a single type for optimization. [MIPS] tlbex: Size optimize code by declaring a few functions inline. [MIPS] pg-r4k.c: Dump the generated code [MIPS] Cobalt: Remove cobalt_machine_power_off() [MIPS] Cobalt: Move reset port definition to arch/mips/cobalt/reset.c ...
2007-10-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6Linus Torvalds52-853/+945
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (24 commits) ide: use only ->set_pio_mode method for programming PIO modes (take 2) sis5513: don't change UDMA settings when programming PIO it8213/piix/slc90e66: don't change DMA settings when programming PIO alim15x3: PIO mode setup fixes siimage: fix ->set_pio_mode method to select PIO data transfer cs5520: don't enable VDMA in ->speedproc sc1200: remove redundant warning message from sc1200_tune_chipset() ide-pmac: PIO mode setup fixes (take 3) icside: fix ->speedproc to return on unsupported modes (take 5) sgiioc4: use ide_tune_dma() amd74xx/via82cxxx: use ide_tune_dma() ide: add ide_set{_max}_pio() (take 4) ide: Kconfig face-lift ide: move ide_rate_filter() calls to the upper layer (take 2) sis5513: add ->udma_filter method for chipset_family >= ATA_133 ide: mode limiting fixes for user requested speed changes ide: add missing ide_rate_filter() calls to ->speedproc()-s ide: call udma_filter() before resorting to the UltraDMA mask ide: make jmicron match vendor and device class pdc202xx_new: switch to using pci_get_slot() (take 2) ...
2007-10-11Merge branch 'for-linus' of git://git.o-hand.com/linux-rpurdie-ledsLinus Torvalds5-47/+252
* 'for-linus' of git://git.o-hand.com/linux-rpurdie-leds: leds: Update Cobalt Qube series front LED support leds: Add Cobalt Raq series LEDs support leds: Rename leds-cobalt driver
2007-10-11Merge branch 'for-linus' of git://git.o-hand.com/linux-rpurdie-backlightLinus Torvalds12-44/+518
* 'for-linus' of git://git.o-hand.com/linux-rpurdie-backlight: backlight: Convert corgi backlight driver into a more generic driver backlight: Add Samsung LTV350QV LCD driver backlight: Fix cr_bllcd allocations and error paths backlight/leds: Make two structs static
2007-10-11Merge branch 'dmi-const' of ↵Linus Torvalds35-97/+103
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/misc-2.6 * 'dmi-const' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/misc-2.6: drivers/firmware: const-ify DMI API and internals
2007-10-11Merge branch 'block-2.6.24' of git://git.kernel.dk/data/git/linux-2.6-blockLinus Torvalds72-1687/+1728
* 'block-2.6.24' of git://git.kernel.dk/data/git/linux-2.6-block: (37 commits) [BLOCK] Fix failing compile with BLK_DEV_IO_TRACE=n compat_ioctl: move floppy handlers to block/compat_ioctl.c compat_ioctl: move cdrom handlers to block/compat_ioctl.c compat_ioctl: move BLKPG handling to block/compat_ioctl.c compat_ioctl: move hdio calls to block/compat_ioctl.c compat_ioctl: handle blk_trace ioctls compat_ioctl: add compat_blkdev_driver_ioctl() compat_ioctl: move common block ioctls to compat_blkdev_ioctl Sysace: Don't enable IRQ until after interrupt handler is registered Sysace: sparse fixes Sysace: Minor coding convention fixup drivers/block/umem: use DRIVER_NAME where appropriate drivers/block/umem: trim trailing whitespace drivers/block/umem: minor cleanups drivers/block/umem: use dev_printk() drivers/block/umem: move private include away from include/linux Sysace: Labels in C code should not be indented. Sysace: Add of_platform_bus binding Sysace: Move IRQ handler registration to occur after FSM is initialized Sysace: minor rework and cleanup changes ...
2007-10-11Merge branch 'for-linus' of ↵Linus Torvalds21-72/+446
git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/avr32-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/avr32-2.6: [AVR32] Fix random segfault with preemption [AVR32] Don't use __builtin_xchg() [AVR32] ngw100 i2c-gpio tweaks [AVR32] Ignore a few irrelevant syscalls [AVR32] SMC configuration in clock cycles [AVR32] Drop support for redundant "keepinitrd" boot-time parm. [AVR32] Make dma_sync_*_for_cpu no-ops [AVR32] Remove unneeded 8K alignment of .text section [AVR32] Kill a few hardcoded constants in vmlinux.lds [AVR32] rename vmlinux.lds [AVR32] fix command line parsing in early_parse_fbmem [AVR32] checkstack support [AVR32] Wire up USBA device [AVR32] add multidrive support for pio driver [AVR32] /sys/kernel/debug/at32ap_clk [AVR32] Move AT32_PM_BASE definition into pm.h
2007-10-11Merge branch 'for-linus' of ↵Linus Torvalds116-4804/+6069
git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6: (74 commits) Blackfin serial driver: pending a unique anomaly id, tie the break flood issue to ANOMALY_05000230 blackfin enable arbitary speed serial setting Blackfin arch: Remove cruft - CONFIG_DEBUG_SERIAL_EARLY_INIT and DEBUG_KERNEL_START Blackfin arch: fix typo in register name Blackfin arch: trim the Blackfin arch MAINTAINERS list Blackfin arch: fix bug libstdc++ calling writev with an iovec containing { NULL, 0 } fails on Blackfin Blackfin arch: Export strcpy - occasionally get module link failures otherwise Blackfin arch: the load address is not safe to point to as a workaround for ANOMALY 05000281 Blackfin arch: show_mem can not be marked as init, since it is called during OOM condition Blackfin arch: flush/inv the correct range when using write back cache and fix bugs find by dmacopy Blackfin arch: update kgdb patch Blackfin arch: Comply with revised Anomaly Workarounds for BF533 05000311 and BF561 05000323 Blackfin arch: Print out debug info, as early as possible Blackfin arch: Enable earlyprintk earlier - so any error after our interrupt tables are set up will print out Blackfin arch: fix endless loop bug when a double fault happens Blackfin arch: Initial patch to add earlyprintk support Blackfin arch: add TWIx_REGBASE and SPIx_REGBASE to specific CPU header files, use the new REGBASE for board platform resources Blackfin arch: modify the insX/outsX and dma_insX/dma_outsX to be compatible with other archs Blackfin arch: add more common defines for output sections Blackfin arch: cleanup IO and DMA_IO API function definitions according to other arches ...
2007-10-11Merge branch 'master' of ↵Linus Torvalds276-5788/+18481
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb * 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb: (310 commits) V4L/DVB (6316): Change list_for_each+list_entry to list_for_each_entry V4L/DVB (6315): pvrusb2: Change list_for_each+list_entry to list_for_each_entry V4L/DVB (6314): saa7134: Replace list_for_each+list_entry with list_for_each_entry V4L/DVB (6313): ivtv: Replace list_for_each+list_entry with list_for_each_entry V4L/DVB (6312): cx88: Replace list_for_each+list_entry with list_for_each_entry V4L/DVB (6311): dvb: Replace list_for_each+list_entry with list_for_each_entry V4L/DVB (6308): V4L: zc0301, remove bad usage of ERESTARTSYS V4L/DVB (6307): V4L: w9968cf, remove bad usage of ERESTARTSYS V4L/DVB (6306): Few clenups for saa7134 resume code V4L/DVB (6305): V4L: videobuf-core.c avoid NULL dereferences in videobuf-core V4L/DVB (6301): pvrusb: Update DEBUGIFC sysfs to kernel 2.6.13+ V4L/DVB (6300): CodingStyle cleanup V4L/DVB (6299): dvb: Add dependencies for VIDEOBUF_DVB V4L/DVB (6297): cx23885: remove wrong Kconfig selection of VIDEOBUF V4L/DVB (6296): dib0700: add support for AverMedia DVB-T Express card V4L/DVB (6295): saa7134: add autodetection for KWorld ATSC-115 V4L/DVB (6293): V4L: convert struct class_device to struct device V4L/DVB (6292): videobuf_core init always require callback implementation V4L/DVB (6291): Fix: avoid oops on some SMP machines V4L/DVB (6290): remove videobuf_set_pci_ops ...
2007-10-11Merge branch 'for-linus' of ↵Linus Torvalds52-430/+6259
git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc: (67 commits) mmc: don't use weight32() pxamci: support arbitrary block size sdio: make the IRQ thread more resilient in the presence of bad states sdio: fix IRQ diagnostic message sdhci: remove old dma module params sdhci: add SDHCI_QUIRK_BROKEN_DMA quirk sdhci: remove DMA capability check from controller's PCI Class reg sdhci: fix a typo mmc: Disabler for Ricoh MMC controller sdio: adaptive interrupt polling mmc: pxamci: add SDIO card interrupt reporting capability mmc: pxamci: set proper buswidth capabilities according to PXA flavor mmc: pxamci: set proper block capabilities according to PXA flavor mmc: pxamci: better pending IRQ determination arm: i.MX/MX1 SDHC implements SD cards read-only switch read-back mmc: add led trigger mmc_spi host driver MMC core learns about SPI MMC/SD card driver learns SPI MMC headers learn about SPI ...
2007-10-11[SKY2]: status polling loop (post merge)Stephen Hemminger1-24/+17
Handle the corner case where budget is exhausted correctly. And save unnecessary read of index register. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-11[NET]: Fix NAPI completion handling in some drivers.David S. Miller3-42/+82
In order for the list handling in net_rx_action() to be correct, drivers must follow certain rules as stated by this comment in net_rx_action(): /* Drivers must not modify the NAPI state if they * consume the entire weight. In such cases this code * still "owns" the NAPI instance and therefore can * move the instance around on the list at-will. */ A few drivers do not do this because they mix the budget checks with reading hardware state, resulting in crashes like the one reported by takano@axe-inc.co.jp. BNX2 and TG3 are taken care of here, SKY2 fix is from Stephen Hemminger. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-11[TCP]: Limit processing lost_retrans loop to work-to-do casesIlpo Järvinen3-3/+15
This addition of lost_retrans_low to tcp_sock might be unnecessary, it's not clear how often lost_retrans worker is executed when there wasn't work to do. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-02 21:48:35 +0000