summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2012-11-01bnx2x: Fix potential incorrect link speed provisionYaniv Rosner1-10/+12
Fix possible incorrect link speed provision following rapid link speed change. Clear link speed mask after each link change, and not only after link down. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Barak Witkowski <barak@broadcom.com> Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-01bnx2x: Restore global registers back to default.Yaniv Rosner1-22/+56
Several KR registers were not set correctly back to default after loopback test, so set those global registers over the global WC lane (zero) rather than the current lane. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Barak Witkowski <barak@broadcom.com> Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-01bnx2x: Fix link down in 57712 following LFAYaniv Rosner1-5/+18
In case of link flap avoidance between PXE boot and bnx2x, set the appropriate PHY DEVAD even if LFA kicks in. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Barak Witkowski <barak@broadcom.com> Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-01bnx2x: Fix 57810 1G-KR link against certain switches.Yaniv Rosner1-2/+8
Fix 1G KR link by restoring CL72 misc control register to default value rather than 0. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Barak Witkowski <barak@broadcom.com> Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-01Merge git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds2-39/+36
Pull KVM fix from Marcelo Tosatti. * git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: x86: fix vcpu->mmio_fragments overflow
2012-11-01ixgbe: PTP get_ts_info missing software supportJacob Keller1-0/+3
This patch corrects the ethtool get_ts_info functon which did not state that software timestamping was supported, even though it is. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> CC: Stable <stable@vger.kernel.org> [3.5] Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-01drm/radeon: add load detection support for ext DAC on R200 (v2)Alex Deucher1-0/+97
The R200 asics use an external DAC for the secondary DAC. The current KMS code tries to use code for the integrated TV DAC for R200 which leads to unpredictable results since R200 does not have an integrated TV DAC. This patch ports the external DAC load detection support from the UMS driver to KMS. v2: fix typo in loop break logic Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Egbert Eich <eich@suse.de>
2012-11-01DRM/radeon: For single CRTC GPUs move handling of CRTC_CRT_ON to crtc_dpms().Egbert Eich2-4/+18
On all dual CRTC GPUs the CRTC_CRT_ON in the RADEON_CRTC_EXT_CNTL register controls the CRTC of the primary DAC. Therefore it is set in the DAC DMPS function. This is different for GPU's with a single CRTC but a primary and a TV DAC: here it controls the single CRTC no matter where it is routed. Therefore we set it here. This avoids an elaborate on/off state tracking since both primary_dac_dpms() and tv_dac_dpms() functions would have to touch this bit. On single CRTC GPUs with just one DAC it's irrelevant where this bit is handled. agd5f: fix warning Signed-off-by: Egbert Eich <eich@suse.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2012-11-01DRM/Radeon: Fix TV DAC Load Detection for single CRTC chips.Egbert Eich1-24/+38
The RN50 has a TV DAC but only a single CRTC. For load detection this DAC is controlled by the primary CRTC. Signed-off-by: Egbert Eich <eich@suse.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2012-11-01DRM/Radeon: Clean up code in TV DAC load detection.Egbert Eich1-8/+10
Signed-off-by: Egbert Eich <eich@suse.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2012-11-01drm/radeon: fix ATPX function documentationIgor Murzov1-2/+2
Fix a copy&pasted documentation. Signed-off-by: Igor Murzov <e-mail@date.by> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2012-11-01drivers/gpu/drm/radeon/evergreen_cs.c: Remove unnecessary semicolonPeter Senna Tschudin1-1/+1
A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r1@ statement S; position p,p1; @@ S@p1;@p @script:python r2@ p << r1.p; p1 << r1.p1; @@ if p[0].line != p1[0].line_end: cocci.include_match(False) @@ position r1.p; @@ -;@p // </smpl> Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2012-11-01DRM/Radeon: On DVI-I use Load Detection when EDID is bogus.Egbert Eich1-7/+21
The Radeon driver uses the analog/digital flag to determine if the DAC or the TMDS encoder should be enabled on a DVI-I connector. If the EDID is bogus this flag is no longer reliable. This fix adds a fallback to DAC load detection to determine if anything is connected to the DAC. If not and a (bogus) EDID is found it assumes a digital display is connected. This works around problems with some crappy IPMI devices using Radeon ES1000. Signed-off-by: Egbert Eich <eich@suse.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2012-11-01DRM/Radeon: Fix primary DAC Load Detection for RV100 chips.Egbert Eich1-0/+2
For Radeon 7500 ATI recommends a DAC_FORCE value of 0x1ac. This value works better on ES1000 (RV100) chips, too, as it doesn't produce any false positives on any cards I have tested. Therefore let's assume that this value is good for all RV100 and RV200 chipset generations. Signed-off-by: Egbert Eich <eich@suse.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2012-11-01DRM/Radeon: Fix Load Detection on legacy primary DAC.Egbert Eich1-0/+1
An uninitialized variable led to broken load detection. Signed-off-by: Egbert Eich <eich@suse.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2012-11-01target: Fix incorrect usage of nested IRQ spinlocks in ABORT_TASK pathSteve Hodgson1-3/+3
This patch changes core_tmr_abort_task() to use spin_lock -> spin_unlock around se_cmd->t_state_lock while spin_lock_irqsave is held via se_sess->sess_cmd_lock. Signed-off-by: Steve Hodgson <steve@purestorage.com> Signed-off-by: Roland Dreier <roland@purestorage.com> Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-11-01iscsi-target: Fix missed wakeup race in TX threadRoland Dreier5-3/+26
The sleeping code in iscsi_target_tx_thread() is susceptible to the classic missed wakeup race: - TX thread finishes handle_immediate_queue() and handle_response_queue(), thinks both queues are empty. - Another thread adds a queue entry and does wake_up_process(), which does nothing because the TX thread is still awake. - TX thread does schedule_timeout() and sleeps forever. In practice this can kill an iSCSI connection if for example an initiator does single-threaded writes and the target misses the wakeup window when queueing an R2T; in this case the connection will be stuck until the initiator loses patience and does some task management operation (or kills the connection entirely). Fix this by converting to wait_event_interruptible(), which does not suffer from this sort of race. Signed-off-by: Roland Dreier <roland@purestorage.com> Cc: Andy Grover <agrover@redhat.com> Cc: Hannes Reinecke <hare@suse.de> Cc: Christoph Hellwig <hch@lst.de> Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-11-01target: Avoid integer overflow in se_dev_align_max_sectors()Roland Dreier1-9/+9
The expression (max_sectors * block_size) might overflow a u32 (indeed, since iblock sets max_hw_sectors to UINT_MAX, it is guaranteed to overflow and end up with a much-too-small result in many common cases). Fix this by doing an equivalent calculation that doesn't require multiplication. While we're touching this code, avoid splitting a printk format across two lines and use pr_info(...) instead of printk(KERN_INFO ...). Signed-off-by: Roland Dreier <roland@purestorage.com> Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-11-01target: Don't return success from module_init() if setup failsRoland Dreier1-1/+2
If the call to core_dev_release_virtual_lun0() fails, then nothing sets ret to anything other than 0, so even though everything is torn down and freed, target_core_init_configfs() will seem to succeed and the module will be loaded. Fix this by passing the return value on up the chain. Signed-off-by: Roland Dreier <roland@purestorage.com> Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-10-31target: Re-add explict zeroing of INQUIRY bounce buffer memoryNicholas Bellinger1-0/+2
This patch fixes a regression in spc_emulate_inquiry() code where the local scope bounce buffer was no longer getting it's memory zeroed, causing various problems with SCSI initiators that depend upon areas of INQUIRY EVPD=0x83 payload having been zeroed. This bug was introduced with the following v3.7-rc1 patch + CC'ed stable commit: commit ffe7b0e9326d9c68f5688bef691dd49f1e0d3651 Author: Paolo Bonzini <pbonzini@redhat.com> Date: Fri Sep 7 17:30:38 2012 +0200 target: support zero allocation length in INQUIRY Go ahead and re-add the missing memset of bounce buffer memory to be copied into the outgoing se_cmd descriptor kmapped SGL payload. Reported-by: Kelsey Prantis <kelsey.prantis@intel.com> Cc: Kelsey Prantis <kelsey.prantis@intel.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Andy Grover <agrover@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-10-31Merge git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pendingLinus Torvalds7-16/+111
Pull scsi target fixes from Nicholas Bellinger: "These are the current target pending fixes headed for v3.7-rc4 code. This includes the following highlights: - Fix long-standing qla2xxx target bug where certain fc_port_t state transitions could cause the internal session b-tree list to become out-of-sync. (Roland) - Fix task management double free of se_cmd descriptor in exception path for users of target_submit_tmr(). (nab) - Re-introduce simple NOP emulation of REZERO_UNIT, SEEK_6, and SEEK_10 SCSI-2 commands in order to support legacy initiators that still require them. (Bernhard) Note these three patches are also CC'ed to stable. Also, there a couple of outstanding (external) regressions that are still being tracked down for tcm_fc(FCoE) and tcm_vhost fabrics for v3.7.0 code, so please expect another PULL as these issues identified -> resolved." * git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: target: reintroduce some obsolete SCSI-2 commands target: Fix double-free of se_cmd in target_complete_tmr_failure qla2xxx: Update target lookup session tables when a target session changes tcm_qla2xxx: Format VPD page 83h SCSI name string according to SPC qla2xxx: Add missing ->vport_slock while calling qlt_update_vp_map
2012-10-31Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds11-68/+83
Pull nouveau fixes from Dave Airlie: "Just a nouveau set, since we have a couple of reports on lkml and dri-devel of regressions that this should fix I sent it along on its own." * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/nouveau: headless mode by default if pci class != vga display drm/nouveau: resurrect headless mode since rework drm/nv50/fb: prevent oops on chipsets without compression tags drm/nouveau: allow creation of zero-sized mm drm/nouveau/i2c: fix typo when checking nvio i2c port validity drm/nouveau: silence modesetting spam on pre-gf8 chipsets
2012-10-31Merge branch 'for-linus' of ↵Linus Torvalds6-8/+51
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid Pull HID updates from Jiri Kosina: "This contains fixes for two devices by Jiri Slaby and Xianhan Yu, new device IDs for MacBook Pro 10,2 from Dirk Hohndel and generic multitouch code fix from Alan Cox." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: Add support for the MacBook Pro 10,2 keyboard / touchpad HID: multitouch: fix maxcontacts problem on GeneralTouch HID: multitouch: put the case in the right switch statement HID: microsoft: fix invalid rdesc for 3k kbd
2012-10-31Merge tag 'sound-3.7' of ↵Linus Torvalds24-99/+303
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "This contains unexpectedly many changes in a wide range due to the fixes for races at disconnection of USB audio devices. In the end, we end up covering fairly core parts of sound subsystem. Other than that, just a few usual small fixes." * tag 'sound-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: ice1724: Fix rate setup after resume ALSA: Avoid endless sleep after disconnect ALSA: Add a reference counter to card instance ALSA: usb-audio: Fix races at disconnection in mixer_quirks.c ALSA: usb-audio: Use rwsem for disconnect protection ALSA: usb-audio: Fix races at disconnection ALSA: PCM: Fix some races at disconnection ASoC: omap-dmic: Correct functional clock name ASoC: zoom2: Fix compile error by including correct header files ALSA: hda - Fix mute-LED setup for HP dv5 laptop
2012-10-31KVM: x86: fix vcpu->mmio_fragments overflowXiao Guangrong2-39/+36
After commit b3356bf0dbb349 (KVM: emulator: optimize "rep ins" handling), the pieces of io data can be collected and write them to the guest memory or MMIO together Unfortunately, kvm splits the mmio access into 8 bytes and store them to vcpu->mmio_fragments. If the guest uses "rep ins" to move large data, it will cause vcpu->mmio_fragments overflow The bug can be exposed by isapc (-M isapc): [23154.818733] general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC [ ......] [23154.858083] Call Trace: [23154.859874] [<ffffffffa04f0e17>] kvm_get_cr8+0x1d/0x28 [kvm] [23154.861677] [<ffffffffa04fa6d4>] kvm_arch_vcpu_ioctl_run+0xcda/0xe45 [kvm] [23154.863604] [<ffffffffa04f5a1a>] ? kvm_arch_vcpu_load+0x17b/0x180 [kvm] Actually, we can use one mmio_fragment to store a large mmio access then split it when we pass the mmio-exit-info to userspace. After that, we only need two entries to store mmio info for the cross-mmio pages access Signed-off-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2012-10-31NFS: add nfs_sb_deactive_async to avoid deadlockWeston Andros Adamson5-3/+56
Use nfs_sb_deactive_async instead of nfs_sb_deactive when in a workqueue context. This avoids a deadlock where rpc_shutdown_client loops forever in a workqueue kworker context, trying to kill all RPC tasks associated with the client, while one or more of these tasks have already been assigned to the same kworker (and will never run rpc_exit_task). This approach is needed because RPC tasks that have already been assigned to a kworker by queue_work cannot be canceled, as explained in the comment for workqueue.c:insert_wq_barrier. Signed-off-by: Weston Andros Adamson <dros@netapp.com> [Trond: add module_get/put.] Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-10-31nfs: Show original device name verbatim in /proc/*/mount{s,info}Ben Hutchings4-9/+20
Since commit c7f404b ('vfs: new superblock methods to override /proc/*/mount{s,info}'), nfs_path() is used to generate the mounted device name reported back to userland. nfs_path() always generates a trailing slash when the given dentry is the root of an NFS mount, but userland may expect the original device name to be returned verbatim (as it used to be). Make this canonicalisation optional and change the callers accordingly. [jrnieder@gmail.com: use flag instead of bool argument] Reported-and-tested-by: Chris Hiestand <chiestand@salk.edu> Reference: http://bugs.debian.org/669314 Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Cc: <stable@vger.kernel.org> # v2.6.39+ Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-10-31nfsv3: Make v3 mounts fail with ETIMEDOUTs instead EIO on mountd timeoutsScott Mayhew1-1/+1
In very busy v3 environment, rpc.mountd can respond to the NULL procedure but not the MNT procedure in a timely manner causing the MNT procedure to time out. The problem is the mount system call returns EIO which causes the mount to fail, instead of ETIMEDOUT, which would cause the mount to be retried. This patch sets the RPC_TASK_SOFT|RPC_TASK_TIMEOUT flags to the rpc_call_sync() call in nfs_mount() which causes ETIMEDOUT to be returned on timed out connections. Signed-off-by: Steve Dickson <steved@redhat.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: stable@vger.kernel.org
2012-10-31nfs: Check whether a layout pointer is NULL before free itYanchuan Nian1-2/+2
The new layout pointer in pnfs_find_alloc_layout() may be NULL because of out of memory. we must do some check work, otherwise pnfs_free_layout_hdr() will go wrong because it can not deal with a NULL pointer. Signed-off-by: Yanchuan Nian <ycnian@gmail.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-10-31NFS: fix bug in legacy DNS resolver.NeilBrown1-2/+3
The DNS resolver's use of the sunrpc cache involves a 'ttl' number (relative) rather that a timeout (absolute). This confused me when I wrote commit c5b29f885afe890f953f7f23424045cdad31d3e4 "sunrpc: use seconds since boot in expiry cache" and I managed to break it. The effect is that any TTL is interpreted as 0, and nothing useful gets into the cache. This patch removes the use of get_expiry() - which really expects an expiry time - and uses get_uint() instead, treating the int correctly as a ttl. This fixes a regression that has been present since 2.6.37, causing certain NFS accesses in certain environments to incorrectly fail. Reported-by: Chuck Lever <chuck.lever@oracle.com> Tested-by: Chuck Lever <chuck.lever@oracle.com> Cc: stable@vger.kernel.org Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-10-31cpufreq / powernow-k8: Change maintainer's email addressAndreas Herrmann1-1/+1
Change the Andreas' email address in drivers/cpufreq/powernow-k8.c. Signed-off-by: Andreas Herrmann <herrmann.der.user@googlemail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-10-31NFSv4: nfs4_locku_done must release the sequence idTrond Myklebust1-0/+1
If the state recovery machinery is triggered by the call to nfs4_async_handle_error() then we can deadlock. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: stable@vger.kernel.org
2012-10-31NFSv4.1: We must release the sequence id when we fail to get a session slotTrond Myklebust1-13/+23
If we do not release the sequence id in cases where we fail to get a session slot, then we can deadlock if we hit a recovery scenario. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: stable@vger.kernel.org
2012-10-31Merge branch 'for-davem' of ↵David S. Miller9-39/+122
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless John W. Linville says: ==================== This is a batch of fixes intended for 3.7... The biggest portion of this is a pull request from Johannes Berg: "Please pull my mac80211.git tree per below to get a number of fixes. I have included a patch from Antonio to fix a memcpy overrun, Felix's patches for the antenna gain/tx power issues, a few mesh-related fixes from Javier for mac80211 and my own patches to not access data that might not be present in an skb at all as well as a patch (the duplicate IE check one) to make mac80211 forward-compatible with potential future spec extensions that use the same IE multiple times. It's a bit bigger than I'd like maybe, but I think all of these are worthwhile fixes at this point." In addition... Felix Fietkau fixes an ath9k use-after-free issue. Stanislaw Gruszka adds a valid value check to rt2800. Sven Eckelmann adds a check to only check a TID value in a BlockAck, for frames that could be either a BlockAck or a normal Ack. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31Merge branch 'master' of git://1984.lsi.us.es/nfDavid S. Miller4-5/+10
Pablo Neira Ayuso says: ==================== The following patchset contains fixes for your net tree, two of them are due to relatively recent changes, one has been a longstanding bug, they are: * Fix incorrect usage of rt_gateway in the H.323 helper, from Julian Anastasov. * Skip re-route in nf_nat code for ICMP traffic. If CONFIG_XFRM is enabled, we waste cycles to look up for the route again. This problem seems to be there since really long time. From Ulrich Weber. * Fix mismatching section in nf_conntrack_reasm, from Hein Tibosch. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31vxlan: don't expire permanent entriesstephen hemminger1-1/+1
VXLAN confused flag versus bitmap on state. Based on part of a earlier patch by David Stevens. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31NFS: Wait for session recovery to finish before returningBryan Schumaker1-2/+1
Currently, we will schedule session recovery and then return to the caller of nfs4_handle_exception. This works for most cases, but causes a hang on the following test case: Client Server ------ ------ Open file over NFS v4.1 Write to file Expire client Try to lock file The server will return NFS4ERR_BADSESSION, prompting the client to schedule recovery. However, the client will continue placing lock attempts and the open recovery never seems to be scheduled. The simplest solution is to wait for session recovery to run before retrying the lock. Signed-off-by: Bryan Schumaker <bjschuma@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: stable@vger.kernel.org
2012-10-31Merge branch 'master' of ↵John W. Linville9-39/+122
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
2012-10-31xen/mmu: Use Xen specific TLB flush instead of the generic one.Konrad Rzeszutek Wilk2-1/+28
As Mukesh explained it, the MMUEXT_TLB_FLUSH_ALL allows the hypervisor to do a TLB flush on all active vCPUs. If instead we were using the generic one (which ends up being xen_flush_tlb) we end up making the MMUEXT_TLB_FLUSH_LOCAL hypercall. But before we make that hypercall the kernel will IPI all of the vCPUs (even those that were asleep from the hypervisor perspective). The end result is that we needlessly wake them up and do a TLB flush when we can just let the hypervisor do it correctly. This patch gives around 50% speed improvement when migrating idle guest's from one host to another. Oracle-bug: 14630170 CC: stable@vger.kernel.org Tested-by: Jingjie Jiang <jingjie.jiang@oracle.com> Suggested-by: Mukesh Rathor <mukesh.rathor@oracle.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-10-31drm: exynos: removed warning due to missing typecast for mixer driver dataRahul Sharma1-1/+1
Removing the warning by adding proper type casting where local pointer variable of type mixer driver data is assigned with void pointer. Signed-off-by: Rahul Sharma <rahul.sharma@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-10-31drm/exynos: add support for ARCH_MULTIPLATFORMRob Clark1-1/+1
Exynos does not seem to have any dependency on anything from platform headers so just needs Kconfig updated to build in ARCH_MULTIPLATFORM builds. Signed-off-by: Rob Clark <rob@ti.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-10-31MAINTAINERS: Add git repository for Exynos DRMInki Dae1-0/+1
Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-10-31drm/exynos: fix display on issueInki Dae2-16/+18
When crtc_funcs->dpms callback is called, exynos_crtc->dpms and exynos_encoder->dpms are changed to new mode. But if user requests dpms mode operation, OFF -> ON, when crtc's dpms callback is called, exynos_encoder->dpms is also changed to ON. This makes encoder's dpms callback call be ignored so display power couldn't become on again. This patch removes exynos_encoder->dpms changing and adds 'updated' variable to exynos_drm_encoder structure to avoid duplicated overlay updating. Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-10-31HID: Add support for the MacBook Pro 10,2 keyboard / touchpadDirk Hohndel4-0/+36
This enables the existing drivers for keyboard and touchpad with the new USB IDs found on the MBP 13" Reasonable Resolution (also known as the Retina Display). Added entries to both keyboard and mouse ignore lists. Signed-off-by: Dirk Hohndel <dirk@hohndel.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-10-31HID: multitouch: fix maxcontacts problem on GeneralTouchXianhan Yu1-2/+1
Fix maxcontacts problem for PWT GeneralTouch multi-touchscreen. Our device didn't contain HID_DG_CONTACTMAX usage. This usage use to describe touchscreen's maxcontacts for hid-multitouch.c to get maxcontacts automatic. We fix the device that driver can get maxcontact from our device, hence it doesn't need .maxcontact=10. Now there is just one device class can fix all our PWT touchscreen. Signed-off-by: Xianhan Yu <aroundight77@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-10-31HID: multitouch: put the case in the right switch statementAlan Cox1-1/+1
Signed-off-by: Alan Cox <alan@linux.intel.com> Acked-by: Benjamin Tissoires <benjamin.tissoires@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-10-31HID: microsoft: fix invalid rdesc for 3k kbdJiri Slaby1-5/+13
Microsoft Digital Media Keyboard 3000 has two interfaces, and the second one has a report descriptor with a bug. The second collection says: 05 01 -- global; usage page -- 01 -- Generic Desktop Controls 09 80 -- local; usage -- 80 -- System Control a1 01 -- main; collection -- 01 -- application 85 03 -- global; report ID -- 03 19 00 -- local; Usage Minimum -- 00 29 ff -- local; Usage Maximum -- ff 15 00 -- global; Logical Minimum -- 0 26 ff 00 -- global; Logical Maximum -- ff 81 00 -- main; input c0 -- main; End Collection I.e. it makes us think that there are all kinds of usages of system control. That the keyboard is a not only a keyboard, but also a joystick, mouse, gamepad, keypad, etc. The same as for the Wireless Desktop Receiver, this should be Physical Min/Max. So fix that appropriately. References: https://bugzilla.novell.com/show_bug.cgi?id=776834 Cc: <stable@vger.kernel.org> Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-10-31ALSA: ice1724: Fix rate setup after resumeTakashi Iwai1-1/+6
The rate isn't restored properly after resume since it's only set up in hw_params, and not in prepare callback. For fixing it, put the corresponding call to resume callback as well. Reported-and-tested-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-10-30Input: tsc40 - remove wrong announcement of pressure supportRolf Eike Beer1-1/+0
The tsc40 driver announces it supports the pressure event, but will never send one. The announcement will cause tslib to wait for such events and sending all touch events with a pressure of 0. Removing the announcement will make tslib fall back to emulating the pressure on touch events so everything works as expected. Signed-off-by: Rolf Eike Beer <eike-kernel@sf-tec.de> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-10-30Return the right error value when dup[23]() newfd argument is too largeAl Viro1-2/+2
Jack Lin reports that the error return from dup3() for the RLIMIT_NOFILE case changed incorrectly after 3.6. The culprit is commit f33ff9927f42 ("take rlimit check to callers of expand_files()") which when it moved the "return -EMFILE" out to the caller, didn't notice that the dup3() had special code to turn the EMFILE return into EBADF. The replace_fd() helper that got added later then inherited the bug too. Reported-by: Jack Lin <linliangjie@huawei.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> [ Noted more bugs, wrote proper changelog, fixed up typos - Linus ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-31 10:17:04 +0000