summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2010-10-25[SCSI] qla4xxx: On firmware hang do not wait for the outstanding commands to ↵Nilesh Javali1-2/+4
complete Signed-off-by: Nilesh Javali <nilesh.javali@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: Ravi Anand <ravi.anand@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-10-25[SCSI] qla4xxx: free_irqs on failed initialize_adapterVikas Chaudhary1-0/+6
Since interrupts are registered in start_firmware(load_risc) for 82xx, free them if init_firmware fails. Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: Karen Higgins <karen.higgins@qlogic.com> Signed-off-by: Ravi Anand <ravi.anand@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-10-25[SCSI] qla4xxx: correct data type of sense_len in qla4xxx_status_cont_entryVikas Chaudhary1-1/+1
change data type of sense_len from uint8_t to uint16_t Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: Ravi Anand <ravi.anand@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-10-25[SCSI] qla4xxx: remove "ha->retry_reset_ha_cnt" from wait_for_hba_onlineVikas Chaudhary1-2/+0
remove "ha->retry_reset_ha_cnt" from wait_for_hba_online as its initialize to zero at driver init time so it could always return QLA_ERROR from wait_for_hba_online() without waiting for hba to come online. Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: Ravi Anand <ravi.anand@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-10-25[SCSI] qla4xxx: honor return status of qla4xxx_hw_resetVikas Chaudhary1-2/+5
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: Ravi Anand <ravi.anand@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-10-25[SCSI] qla4xxx: Trivial cleanupVikas Chaudhary5-22/+12
* cleanup function qla4xxx_recovery_timeout - No need to wakeup dpc thread from function qla4xxx_recovery_timeout() as we are not doing anything in do_dpc() thread when wakeup from qla4xxx_recovery_timeout() * cleanup function qla4xxx_wait_for_hba_online - Remove hard coded value from qla4xxx_wait_for_hba_online(). * cleanup function qla4xxx_start_firmware_from_flash - display seconds * cleanup function qla4_8xxx_load_risc - Remove redundant code. * cleanup function qla4xxx_get_firmware_status - update debug statement * cleanup function qla4_8xxx_try_start_fw - update return status Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: Ravi Anand <ravi.anand@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-10-25[SCSI] Fix regressions in scsi_internal_device_blockMike Christie1-1/+2
Deleting a SCSI device on a blocked fc_remote_port (before fast_io_fail_tmo fires) results in a hanging thread: STACK: 0 schedule+1108 [0x5cac48] 1 schedule_timeout+528 [0x5cb7fc] 2 wait_for_common+266 [0x5ca6be] 3 blk_execute_rq+160 [0x354054] 4 scsi_execute+324 [0x3b7ef4] 5 scsi_execute_req+162 [0x3b80ca] 6 sd_sync_cache+138 [0x3cf662] 7 sd_shutdown+138 [0x3cf91a] 8 sd_remove+112 [0x3cfe4c] 9 __device_release_driver+124 [0x3a08b8] 10 device_release_driver+60 [0x3a0a5c] 11 bus_remove_device+266 [0x39fa76] 12 device_del+340 [0x39d818] 13 __scsi_remove_device+204 [0x3bcc48] 14 scsi_remove_device+66 [0x3bcc8e] 15 sysfs_schedule_callback_work+50 [0x260d66] 16 worker_thread+622 [0x162326] 17 kthread+160 [0x1680b0] 18 kernel_thread_starter+6 [0x10aaea] During the delete, the SCSI device is in moved to SDEV_CANCEL. When the FC transport class later calls scsi_target_unblock, this has no effect, since scsi_internal_device_unblock ignores SCSI devics in this state. It looks like all these are regressions caused by: 5c10e63c943b4c67561ddc6bf61e01d4141f881f [SCSI] limit state transitions in scsi_internal_device_unblock Fix by rejecting offline and cancel in the state transition. Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> [jejb: Original patch by Christof Schmitt, modified by Mike Christie] Cc: Stable Tree <stable@kernel.org> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-10-25[SCSI] zfcp: Use correct length for FCP_RSP_INFOChristof Schmitt1-1/+1
Use the FCP_RSP_INFO length to correctly skip the FCP_RSP_INFO field. Reviewed-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-10-25[SCSI] zfcp: Call get_device on port before calling put_deviceChristof Schmitt1-2/+2
zfcp_unit_release calls put_device on the port. Ensure that get_device has been called before possibly triggering the release function through put_device or device_unregister. Reviewed-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-10-25[SCSI] zfcp: Fix adapter activation on link downSwen Schillig1-3/+0
If an exchange config is executed while the local link is down, the request succeeds but the returned data is incomplete. Proceeding with the adapter activation is leading to an unpredictable behaviour (e.g. kernel panic) caused by invalid values. In such a scenario the recommended ERP is to retry the action and wait for a link up event. If the issue persists the activation has to fail. Signed-off-by: Swen Schillig <swen@vnet.ibm.com> Sigend-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-10-24Merge branch 'for-next' of ↵Linus Torvalds302-512/+359
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits) Update broken web addresses in arch directory. Update broken web addresses in the kernel. Revert "drivers/usb: Remove unnecessary return's from void functions" for musb gadget Revert "Fix typo: configuation => configuration" partially ida: document IDA_BITMAP_LONGS calculation ext2: fix a typo on comment in ext2/inode.c drivers/scsi: Remove unnecessary casts of private_data drivers/s390: Remove unnecessary casts of private_data net/sunrpc/rpc_pipe.c: Remove unnecessary casts of private_data drivers/infiniband: Remove unnecessary casts of private_data drivers/gpu/drm: Remove unnecessary casts of private_data kernel/pm_qos_params.c: Remove unnecessary casts of private_data fs/ecryptfs: Remove unnecessary casts of private_data fs/seq_file.c: Remove unnecessary casts of private_data arm: uengine.c: remove C99 comments arm: scoop.c: remove C99 comments Fix typo configue => configure in comments Fix typo: configuation => configuration Fix typo interrest[ing|ed] => interest[ing|ed] Fix various typos of valid in comments ... Fix up trivial conflicts in: drivers/char/ipmi/ipmi_si_intf.c drivers/usb/gadget/rndis.c net/irda/irnet/irnet_ppp.c
2010-10-24Merge branch 'devel' of ↵Linus Torvalds5-8/+1273
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/edac * 'devel' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/edac: (25 commits) i7300_edac: Properly initialize per-csrow memory size V4L/DVB: i7300_edac: better initialize page counts MAINTAINERS: Add maintainer for i7300-edac driver i7300-edac: CodingStyle cleanup i7300_edac: Improve comments i7300_edac: Cleanup: reorganize the file contents i7300_edac: Properly detect channel on CE errors i7300_edac: enrich FBD error info for corrected errors i7300_edac: enrich FBD error info for fatal errors i7300_edac: pre-allocate a buffer used to prepare err messages i7300_edac: Fix MTR x4/x8 detection logic i7300_edac: Make the debug messages coherent with the others i7300_edac: Cleanup: remove get_error_info logic i7300_edac: Add a code to cleanup error registers i7300_edac: Add support for reporting FBD errors i7300_edac: Properly detect the type of error correction i7300_edac: Detect if the device is on single mode i7300_edac: Adds detection for enhanced scrub mode on x8 i7300_edac: Clear the error bit after reading i7300_edac: Add error detection code for global errors ...
2010-10-24Merge branch 'for-linus' of ↵Linus Torvalds4-384/+424
git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6: (27 commits) SLUB: Fix memory hotplug with !NUMA slub: Move functions to reduce #ifdefs slub: Enable sysfs support for !CONFIG_SLUB_DEBUG SLUB: Optimize slab_free() debug check slub: Move NUMA-related functions under CONFIG_NUMA slub: Add lock release annotation slub: Fix signedness warnings slub: extract common code to remove objects from partial list without locking SLUB: Pass active and inactive redzone flags instead of boolean to debug functions slub: reduce differences between SMP and NUMA Revert "Slub: UP bandaid" percpu: clear memory allocated with the km allocator percpu: use percpu allocator on UP too percpu: reduce PCPU_MIN_UNIT_SIZE to 32k vmalloc: pcpu_get/free_vm_areas() aren't needed on UP SLUB: Fix merged slab cache names Slub: UP bandaid slub: fix SLUB_RESILIENCY_TEST for dynamic kmalloc caches slub: Fix up missing kmalloc_cache -> kmem_cache_node case for memoryhotplug slub: Add dummy functions for the !SLUB_DEBUG case ...
2010-10-24Merge branch 'kvm-updates/2.6.37' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds73-2271/+6583
* 'kvm-updates/2.6.37' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (321 commits) KVM: Drop CONFIG_DMAR dependency around kvm_iommu_map_pages KVM: Fix signature of kvm_iommu_map_pages stub KVM: MCE: Send SRAR SIGBUS directly KVM: MCE: Add MCG_SER_P into KVM_MCE_CAP_SUPPORTED KVM: fix typo in copyright notice KVM: Disable interrupts around get_kernel_ns() KVM: MMU: Avoid sign extension in mmu_alloc_direct_roots() pae root address KVM: MMU: move access code parsing to FNAME(walk_addr) function KVM: MMU: audit: check whether have unsync sps after root sync KVM: MMU: audit: introduce audit_printk to cleanup audit code KVM: MMU: audit: unregister audit tracepoints before module unloaded KVM: MMU: audit: fix vcpu's spte walking KVM: MMU: set access bit for direct mapping KVM: MMU: cleanup for error mask set while walk guest page table KVM: MMU: update 'root_hpa' out of loop in PAE shadow path KVM: x86 emulator: Eliminate compilation warning in x86_decode_insn() KVM: x86: Fix constant type in kvm_get_time_scale KVM: VMX: Add AX to list of registers clobbered by guest switch KVM guest: Move a printk that's using the clock before it's ready KVM: x86: TSC catchup mode ...
2010-10-24Merge branch 'i2c-for-linus' of ↵Linus Torvalds26-117/+603
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging * 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: i2c-viapro: Don't log nacks i2c/pca954x: Remove __devinit and __devexit from probe and remove functions MAINTAINERS: Add maintainer for PCA9541 I2C bus master selector driver i2c/mux: Driver for PCA9541 I2C Master Selector i2c: Optimize function i2c_detect() i2c: Discard warning message on device instantiation from user-space i2c-amd8111: Add proper error handling i2c: Change to new flag variable i2c: Remove unneeded inclusions of <linux/i2c-id.h> i2c: Let i2c_parent_is_i2c_adapter return the parent adapter i2c: Simplify i2c_parent_is_i2c_adapter i2c-pca-platform: Change device name of request_irq i2c: Fix Kconfig dependencies
2010-10-24Merge branch 'for-linus' of ↵Linus Torvalds42-374/+3934
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (47 commits) HID: fix mismerge in hid-lg HID: hidraw: fix window in hidraw_release HID: hid-sony: override usbhid_output_raw_report for Sixaxis HID: add absolute axis resolution calculation HID: force feedback support for Logitech RumblePad gamepad HID: support STmicroelectronics and Sitronix with hid-stantuml driver HID: magicmouse: Adjust major / minor axes to scale HID: Fix for problems with eGalax/DWAV multi-touch-screen HID: waltop: add support for Waltop Slim Tablet 12.1 inch HID: add NOGET quirk for AXIS 295 Video Surveillance Joystick HID: usbhid: remove unused hiddev_driver HID: magicmouse: Use hid-input parsing rather than bypassing it HID: trivial formatting fix HID: Add support for Logitech Speed Force Wireless gaming wheel HID: don't Send Feature Reports on Interrupt Endpoint HID: 3m: Adjust major / minor axes to scale HID: 3m: Correct touchscreen emulation HID: 3m: Convert to MT slots HID: 3m: Output proper orientation range HID: 3m: Adjust to sequential MT HID protocol ...
2010-10-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds16-38/+1310
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: Makefile - replace the use of <module>-objs with <module>-y crypto: hifn_795x - use cancel_delayed_work_sync() crypto: talitos - sparse check endian fixes crypto: talitos - fix checkpatch warning crypto: talitos - fix warning: 'alg' may be used uninitialized in this function crypto: cryptd - Adding the AEAD interface type support to cryptd crypto: n2_crypto - Niagara2 driver needs to depend upon CRYPTO_DES crypto: Kconfig - update broken web addresses crypto: omap-sham - Adjust DMA parameters crypto: fips - FIPS requires algorithm self-tests crypto: omap-aes - OMAP2/3 AES hw accelerator driver crypto: updates to enable omap aes padata: add missing __percpu markup in include/linux/padata.h MAINTAINERS: Add maintainer entries for padata/pcrypt
2010-10-24Merge branch 'master' into for-linusPekka Enberg4957-178594/+298960
Conflicts: include/linux/percpu.h mm/percpu.c
2010-10-24i2c-viapro: Don't log nacksJean Delvare1-7/+1
Transactions not acked can happen every now and then, in particular during device detection, and various transaction types can be used for this purpose. So stop logging this event, except when debugging is enabled. This is what other similar drivers (e.g. i2c-i801 or i2c-piix4) do. Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-24i2c/pca954x: Remove __devinit and __devexit from probe and remove functionsGuenter Roeck1-4/+4
The underlying I2C adapter may or may not be present when this driver gets initialized, and may disappear later, so there is no safe time at which the probe and remove functions can be discarded. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-24MAINTAINERS: Add maintainer for PCA9541 I2C bus master selector driverGuenter Roeck1-0/+6
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-24i2c/mux: Driver for PCA9541 I2C Master SelectorGuenter Roeck3-0/+422
This patch adds support for PCA9541, an I2C Bus Master Selector. The driver is modeled as single channel I2C Multiplexer to be able to utilize the I2C multiplexer framework. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Reviewed-by: Tom Grennan <tom.grennan@ericsson.com> Acked-by: Jean Delvare <khali@linux-fr.org>
2010-10-24i2c: Optimize function i2c_detect()Jean Delvare1-7/+6
Check the class flags before allocating the temporary i2c_client structure, to avoid allocating it when we don't need it. Also optimize the inner loop a bit. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
2010-10-24i2c: Discard warning message on device instantiation from user-spaceJean Delvare1-2/+0
The "new_device" sysfs interface has been there for quite some time now, nobody complained about it so it must be good enough. Time to remove the warning and call it stable. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Michael Lawnick <ml.lawnick@gmx.de>
2010-10-24i2c-amd8111: Add proper error handlingJulia Lawall1-50/+113
The functions the functions amd_ec_wait_write and amd_ec_wait_read have an unsigned return type, but return a negative constant to indicate an error condition. A sematic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @exists@ identifier f; constant C; @@ unsigned f(...) { <+... * return -C; ...+> } // </smpl> Fixing amd_ec_wait_write and amd_ec_wait_read leads to the need to adjust the return type of the functions amd_ec_write and amd_ec_read, which are the only functions that call amd_ec_wait_write and amd_ec_wait_read. amd_ec_write and amd_ec_read, in turn, are only called from within the function amd8111_access, which already returns a signed typed value. Each of the calls to amd_ec_write and amd_ec_read are updated using the following semantic patch: // <smpl> @@ @@ + status = amd_ec_write - amd_ec_write (...); + if (status) return status; @@ @@ + status = amd_ec_read - amd_ec_read (...); + if (status) return status; // </smpl> The patch also adds the declaration of the status variable. Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-24i2c: Change to new flag variablematt mooney4-12/+4
Replace EXTRA_CFLAGS with ccflags-y. Signed-off-by: matt mooney <mfm@muteddisk.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-24i2c: Remove unneeded inclusions of <linux/i2c-id.h>Jean Delvare10-10/+0
These drivers don't use anything which is defined in <linux/i2c-id.h>. This header file was never meant to be included directly anyway, and will be deleted soon. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Ben Dooks <ben-linux@fluff.org> Acked-by: Dave Airlie <airlied@linux.ie> Cc: Hans Verkuil <hverkuil@xs4all.nl>
2010-10-24i2c: Let i2c_parent_is_i2c_adapter return the parent adapterJean Delvare3-22/+32
This makes the calling site's code clearer IMHO. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Michael Lawnick <ml.lawnick@gmx.de>
2010-10-24i2c: Simplify i2c_parent_is_i2c_adapterJean Delvare1-1/+0
Only i2c devices can have their type set to i2c_adapter_type, so testing the bus type is redundant. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Michael Lawnick <ml.lawnick@gmx.de>
2010-10-24i2c-pca-platform: Change device name of request_irqNobuhiro Iwamatsu1-1/+1
i2c->adap.name shouldn't be used in request_irq. Instead the driver name "i2c-pca-platform" should be used. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Cc: stable@kernel.org Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-24i2c: Fix Kconfig dependenciesJean Delvare2-1/+14
drivers/i2c/algos/Kconfig makes all the algorithms dependent on !I2C_HELPER_AUTO, which triggers a Kconfig warning about broken dependencies when some driver selects one of the algorithms. Ideally we would make only the prompts dependent on !I2C_HELPER_AUTO, however Kconfig doesn't currently support that. So we have to redefine the symbols separately for the I2C_HELPER_AUTO=y case. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Michal Marek <mmarek@suse.cz>
2010-10-24KVM: Drop CONFIG_DMAR dependency around kvm_iommu_map_pagesJan Kiszka1-2/+0
We also have to call kvm_iommu_map_pages for CONFIG_AMD_IOMMU. So drop the dependency on Intel IOMMU, kvm_iommu_map_pages will be a nop anyway if CONFIG_IOMMU_API is not defined. KVM-Stable-Tag. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-10-24KVM: Fix signature of kvm_iommu_map_pages stubJan Kiszka1-2/+1
Breaks otherwise if CONFIG_IOMMU_API is not set. KVM-Stable-Tag. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-10-24KVM: MCE: Send SRAR SIGBUS directlyHuang Ying1-8/+10
Originally, SRAR SIGBUS is sent to QEMU-KVM via touching the poisoned page. But commit 96054569190bdec375fe824e48ca1f4e3b53dd36 prevents the signal from being sent. So now the signal is sent via force_sig_info_fault directly. [marcelo: use send_sig_info instead] Reported-by: Dean Nelson <dnelson@redhat.com> Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-10-24KVM: MCE: Add MCG_SER_P into KVM_MCE_CAP_SUPPORTEDHuang Ying1-1/+1
Now we have MCG_SER_P (and corresponding SRAO/SRAR MCE) support in kernel and QEMU-KVM, the MCG_SER_P should be added into KVM_MCE_CAP_SUPPORTED to make all these code really works. Reported-by: Dean Nelson <dnelson@redhat.com> Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-10-24KVM: fix typo in copyright noticeNicolas Kaiser14-14/+14
Fix typo in copyright notice. Signed-off-by: Nicolas Kaiser <nikai@nikai.net> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-10-24KVM: Disable interrupts around get_kernel_ns()Avi Kivity1-0/+4
get_kernel_ns() wants preemption disabled. It doesn't make a lot of sense during the get/set ioctls (no way to make them non-racy) but the callee wants it. Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24KVM: MMU: Avoid sign extension in mmu_alloc_direct_roots() pae root addressAvi Kivity1-1/+1
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24KVM: MMU: move access code parsing to FNAME(walk_addr) functionXiao Guangrong1-24/+16
Move access code parsing from caller site to FNAME(walk_addr) function Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24KVM: MMU: audit: check whether have unsync sps after root syncXiao Guangrong2-3/+19
After root synced, all unsync sps are synced, this patch add a check to make sure it's no unsync sps in VCPU's page table Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24KVM: MMU: audit: introduce audit_printk to cleanup audit codeXiao Guangrong1-24/+18
Introduce audit_printk, and record audit point instead audit name Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24KVM: MMU: audit: unregister audit tracepoints before module unloadedXiao Guangrong1-9/+12
fix: Call Trace: [<ffffffffa01e46ba>] ? kvm_mmu_pte_write+0x229/0x911 [kvm] [<ffffffffa01c6ba9>] ? gfn_to_memslot+0x39/0xa0 [kvm] [<ffffffffa01c6c26>] ? mark_page_dirty+0x16/0x2e [kvm] [<ffffffffa01c6d6f>] ? kvm_write_guest_page+0x67/0x7f [kvm] [<ffffffff81066fbd>] ? local_clock+0x2a/0x3b [<ffffffffa01d52ce>] emulator_write_phys+0x46/0x54 [kvm] ...... Code: Bad RIP value. RIP [<ffffffffa0172056>] 0xffffffffa0172056 RSP <ffff880134f69a70> CR2: ffffffffa0172056 Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24KVM: MMU: audit: fix vcpu's spte walkingXiao Guangrong1-1/+1
After nested nested paging, it may using long mode to shadow 32/PAE paging guest, so this patch fix it Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24KVM: MMU: set access bit for direct mappingXiao Guangrong1-1/+2
Set access bit while setup up direct page table if it's nonpaing or npt enabled, it's good for CPU's speculate access Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24KVM: MMU: cleanup for error mask set while walk guest page tableXiao Guangrong1-10/+7
Small cleanup for set page fault error code Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24KVM: MMU: update 'root_hpa' out of loop in PAE shadow pathXiao Guangrong1-2/+2
The value of 'vcpu->arch.mmu.pae_root' is not modified, so we can update 'root_hpa' out of the loop. Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24KVM: x86 emulator: Eliminate compilation warning in x86_decode_insn()Sheng Yang1-1/+1
Eliminate: arch/x86/kvm/emulate.c:801: warning: ‘sv’ may be used uninitialized in this function on gcc 4.1.2 Signed-off-by: Sheng Yang <sheng@linux.intel.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-10-24KVM: x86: Fix constant type in kvm_get_time_scaleJan Kiszka1-3/+3
Older gcc versions complain about the improper type (for x86-32), 4.5 seems to fix this silently. However, we should better use the right type initially. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24KVM: VMX: Add AX to list of registers clobbered by guest switchJan Kiszka1-1/+1
By chance this caused no harm so far. We overwrite AX during switch to/from guest context, so we must declare this. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24KVM guest: Move a printk that's using the clock before it's readyArjan Koers1-2/+4
Fix a hang during SMP kernel boot on KVM that showed up after commit 489fb490dbf8dab0249ad82b56688ae3842a79e8 (2.6.35) and 59aab522154a2f17b25335b63c1cf68a51fb6ae0 (2.6.34.1). The problem only occurs when CONFIG_PRINTK_TIME is set. KVM-Stable-Tag. Signed-off-by: Arjan Koers <0h61vkll2ly8@xutrox.com> Signed-off-by: Avi Kivity <avi@redhat.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-09 20:36:27 +0000