summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2010-10-23NFS: decode_dirent should use an xdr_streamBryan Schumaker7-40/+202
Convert nfs*xdr.c to use an xdr stream in decode_dirent. This will prevent a kernel oops that has been occuring when reading a vmapped page. Signed-off-by: Bryan Schumaker <bjschuma@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-10-23SUNRPC: Add a helper function xdr_inline_peekTrond Myklebust2-0/+22
We sometimes need to be able to read ahead in an xdr_stream without incrementing the current pointer position. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-10-23NFS: remove readdir plus limitBryan Schumaker1-5/+1
We will now use readdir plus even on directories that are very large. Signed-off-by: Bryan Schumaker <bjschuma@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-10-23NFS: re-add readdir plusBryan Schumaker1-0/+67
This patch adds readdir plus support to the cache array. Signed-off-by: Bryan Schumaker <bjschuma@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-10-23NFS: Optimise the readdir searchesTrond Myklebust1-4/+2
If we're going through the loop in nfs_readdir() more than once, we usually do not want to restart searching from the beginning of the pages cache. We only want to do that if the previous search failed... Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-10-23NFS: add readdir cache arrayBryan Schumaker1-323/+309
This patch adds the readdir cache array and functions to retreive the array stored on a cache page, clear the array by freeing allocated memory, add an entry to the array, and search the array for a given cookie. It then modifies readdir to make use of the new cache array. With the new cache array method, we no longer need some of this code. Finally, nfs_llseek_dir() will set file->f_pos to a value greater than 0 and desc->dir_cookie to zero. When we see this, readdir needs to find the file at position file->f_pos from the start of the directory. Signed-off-by: Bryan Schumaker <bjschuma@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-10-23nfs: include ratelimit.h, fix nfs4state build errorRandy Dunlap1-0/+1
nfs4state.c uses interfaces from ratelimit.h. It needs to include that header file to fix build errors: fs/nfs/nfs4state.c:1195: warning: type defaults to 'int' in declaration of 'DEFINE_RATELIMIT_STATE' fs/nfs/nfs4state.c:1195: warning: parameter names (without types) in function declaration fs/nfs/nfs4state.c:1195: error: invalid storage class for function 'DEFINE_RATELIMIT_STATE' fs/nfs/nfs4state.c:1195: error: implicit declaration of function '__ratelimit' fs/nfs/nfs4state.c:1195: error: '_rs' undeclared (first use in this function) Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: linux-nfs@vger.kernel.org Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-10-23NFSv4: The state manager must ignore EKEYEXPIRED.Trond Myklebust2-10/+40
Otherwise, we cannot recover state correctly. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-10-23NFSv4: Don't ignore the error return codes from nfs_intent_set_fileTrond Myklebust1-12/+23
If nfs_intent_set_file() returns an error, we usually want to pass that back up the stack. Also ensure that nfs_open_revalidate() returns '1' on success. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-10-19NFSv4: Don't call nfs4_reclaim_complete() on receiving NFS4ERR_STALE_CLIENTIDTrond Myklebust1-5/+11
If the server sends us an NFS4ERR_STALE_CLIENTID while the state management thread is busy reclaiming state, we do want to treat all state that wasn't reclaimed before the STALE_CLIENTID as if a network partition occurred (see the edge conditions described in RFC3530 and RFC5661). What we do not want to do is to send an nfs4_reclaim_complete(), since we haven't yet even started reclaiming state after the server rebooted. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: stable@kernel.org
2010-10-19NFSv4: Don't call nfs4_state_mark_reclaim_reboot() from error handlersTrond Myklebust1-6/+0
In the case of a server reboot, the state recovery thread starts by calling nfs4_state_end_reclaim_reboot() in order to avoid edge conditions when the server reboots while the client is in the middle of recovery. However, if the client has already marked the nfs4_state as requiring reboot recovery, then the above behaviour will cause the recovery thread to treat the open as if it was part of such an edge condition: the open will be recovered as if it was part of a lease expiration (and all the locks will be lost). Fix is to remove the call to nfs4_state_mark_reclaim_reboot from nfs4_async_handle_error(), and nfs4_handle_exception(). Instead we leave it to the recovery thread to do this for us. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: stable@kernel.org
2010-10-19NFSv4: Fix open recoveryTrond Myklebust1-0/+3
NFSv4 open recovery is currently broken: since we do not clear the state->flags states before attempting recovery, we end up with the 'can_open_cached()' function triggering. This again leads to no OPEN call being put on the wire. Reported-by: Sachin Prabhu <sprabhu@redhat.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: stable@kernel.org
2010-10-19NFS: Don't SIGBUS if nfs_vm_page_mkwrite races with a cache invalidationTrond Myklebust1-9/+8
In the case where we lock the page, and then find out that the page has been thrown out of the page cache, we should just return VM_FAULT_NOPAGE. This is what block_page_mkwrite() does in these situations. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: stable@kernel.org
2010-10-07NFS: new idmapperBryan Schumaker8-6/+329
This patch creates a new idmapper system that uses the request-key function to place a call into userspace to map user and group ids to names. The old idmapper was single threaded, which prevented more than one request from running at a single time. This means that a user would have to wait for an upcall to finish before accessing a cached result. The upcall result is stored on a keyring of type id_resolver. See the file Documentation/filesystems/nfs/idmapper.txt for instructions. Signed-off-by: Bryan Schumaker <bjschuma@netapp.com> [Trond: fix up the return value of nfs_idmap_lookup_name and clean up code] Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-09-29NFS: We must use list_for_each_entry_safe in nfs_access_cache_shrinkerTrond Myklebust1-2/+2
We may end up removing the current entry from nfs_access_lru_list. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-09-29NFS: don't use FLUSH_SYNC on WB_SYNC_NONE COMMIT calls (try #2)Jeff Layton1-7/+9
WB_SYNC_NONE is supposed to mean "don't wait on anything". That should also include not waiting for COMMIT calls to complete. WB_SYNC_NONE is also implied when wbc->nonblocking and wbc->for_background are set, so we can replace those checks in nfs_commit_unstable_pages with a check for WB_SYNC_NONE. Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-09-29NFS: Really fix put_nfs_open_context()Trond Myklebust1-2/+4
In nfs_open_revalidate(), if the open_context() call returns an inode that is not the same as dentry->d_inode, then we will call put_nfs_open_context() with a valid dentry->d_inode, but without the context being part of the nfsi->open_files list. In this case too, we want to just skip the list removal, but we do want to call the ->close_context() callback in order to close the NFSv4 state. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Acked-by: Jeff Layton <jlayton@redhat.com>
2010-09-24NFSv4.1: keep seq_res.sr_slot as pointer rather than an indexBenny Halevy6-41/+25
Having to explicitly initialize sr_slotid to NFS4_MAX_SLOT_TABLE resulted in numerous bugs. Keeping the current slot as a pointer to the slot table is more straight forward and robust as it's implicitly set up to NULL wherever the seq_res member is initialized to zeroes. Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-09-23nfs: show "local_lock" mount option in /proc/mountsSuresh Jayaraman1-0/+13
Display the status of 'local_lock' mount option in /proc/mounts. Signed-off-by: Suresh Jayaraman <sjayaraman@suse.de> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-09-23NFS: handle inode==NULL in __put_nfs_open_contextBenny Halevy1-4/+7
inode may be NULL when put_nfs_open_context is called from nfs_atomic_lookup before d_add_unique(dentry, inode) Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-09-23nfs: introduce mount option '-olocal_lock' to make locks localSuresh Jayaraman4-16/+97
NFS clients since 2.6.12 support flock locks by emulating fcntl byte-range locks. Due to this, some windows applications which seem to use both flock (share mode lock mapped as flock by Samba) and fcntl locks sequentially on the same file, can't lock as they falsely assume the file is already locked. The problem was reported on a setup with windows clients accessing excel files on a Samba exported share which is originally a NFS mount from a NetApp filer. Older NFS clients (< 2.6.12) did not see this problem as flock locks were considered local. To support legacy flock behavior, this patch adds a mount option "-olocal_lock=" which can take the following values: 'none' - Neither flock locks nor POSIX locks are local 'flock' - flock locks are local 'posix' - fcntl/POSIX locks are local 'all' - Both flock locks and POSIX locks are local Testing: - This patch was tested by using -olocal_lock option with different values and the NLM calls were noted from the network packet captured. 'none' - NLM calls were seen during both flock() and fcntl(), flock lock was granted, fcntl was denied 'flock' - no NLM calls for flock(), NLM call was seen for fcntl(), granted 'posix' - NLM call was seen for flock() - granted, no NLM call for fcntl() 'all' - no NLM calls were seen during both flock() and fcntl() - No bugs were seen during NFSv4 locking/unlocking in general and NFSv4 reboot recovery. Cc: Neil Brown <neilb@suse.de> Signed-off-by: Suresh Jayaraman <sjayaraman@suse.de> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-09-22lockd: Remove BKL from the clientBryan Schumaker2-14/+14
This patch removes all calls to lock_kernel() from the client. This patch should be applied after the "fs/lock.c prepare for BKL removal" patch submitted by Arnd Bergmann on September 18. Signed-off-by: Bryan Schumaker <bjschuma@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-09-21SUNRPC: Refactor logic to NUL-terminate strings in pagesChuck Lever5-14/+21
Clean up: Introduce a helper to '\0'-terminate XDR strings that are placed in a page in the page cache. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-09-21SUNRPC: Correct an rpcbind debugging messageChuck Lever1-2/+3
Clean up. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-09-21NFS: Fix NFSv3 debugging messages in fs/nfs/nfs3proc.cChuck Lever1-2/+3
Clean up. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-09-21NFS: Convert nfsiod to use alloc_workqueue()Trond Myklebust1-1/+1
create_singlethread_workqueue() is deprecated. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-09-21SUNRPC: Convert rpciod to use the alloc_workqueue() interfaceTrond Myklebust1-1/+1
create_workqueue() is a deprecated function. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-09-21NFSv4.1: Fix the slotid initialisation in nfs_async_rename()Trond Myklebust1-0/+2
This fixes an Oopsable condition that was introduced by commit d3d4152a5d59af9e13a73efa9e9c24383fbe307f (nfs: make sillyrename an async operation) Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-09-21NFS: Fix a use-after-free case in nfs_async_rename()Trond Myklebust1-7/+2
The call to nfs_async_rename_release() after rpc_run_task() is incorrect. The rpc_run_task() is always guaranteed to call the ->rpc_release() method. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-09-17nfs: make sillyrename an async operationJeff Layton5-11/+263
A synchronous rename can be interrupted by a SIGKILL. If that happens during a sillyrename operation, it's possible for the rename call to be sent to the server, but the task exits before processing the reply. If this happens, the sillyrenamed file won't get cleaned up during nfs_dentry_iput and the server is left with a dangling .nfs* file hanging around. Fix this problem by turning sillyrename into an asynchronous operation and have the task doing the sillyrename just wait on the reply. If the task is killed before the sillyrename completes, it'll still proceed to completion. Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-09-17nfs: move nfs_sillyrename to unlink.cJeff Layton3-72/+85
...since that's where most of the sillyrenaming code lives. A comment block is added to the beginning as well to clarify how sillyrenaming works. Also, make nfs_async_unlink static as nfs_sillyrename is the only caller. Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-09-17nfs: standardize the rename response containerJeff Layton5-27/+22
Right now, v3 and v4 have their own variants. Create a standard struct that will work for v3 and v4. v2 doesn't get anything but a simple error and so isn't affected by this. Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-09-17nfs: standardize the rename args containerJeff Layton7-51/+32
Each NFS version has its own version of the rename args container. Standardize them on a common one that's identical to the one NFSv4 uses. Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-09-17NFS: Add an 'open_context' element to struct nfs_rpc_opsTrond Myklebust4-5/+10
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-09-17NFS: Clean up nfs4_proc_create()Trond Myklebust5-51/+58
Remove all remaining references to the struct nameidata from the low level NFS layers. Again pass down a partially initialised struct nfs_open_context when we want to do atomic open+create. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-09-17NFSv4: Further cleanups for nfs4_open_revalidate()Trond Myklebust3-35/+26
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-09-17NFSv4: Clean up nfs4_open_revalidateTrond Myklebust3-19/+17
Remove references to 'struct nameidata' from the low-level open_revalidate code, and replace them with a struct nfs_open_context which will be correctly initialised upon success. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-09-17NFSv4: Further minor cleanups for nfs4_atomic_open()Trond Myklebust3-31/+20
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-09-17NFSv4: Clean up nfs4_atomic_openTrond Myklebust5-36/+93
Start moving the 'struct nameidata' dependent code out of the lower level NFS code in preparation for the removal of open intents. Instead of the struct nameidata, we pass down a partially initialised struct nfs_open_context that will be fully initialised by the atomic open upon success. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-09-17SUNRPC: Remove rpcb_getport_sync()Chuck Lever2-52/+0
Clean up: rpcb_getport_sync() has no more users, so remove it. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-09-17NFS: Allow NFSROOT debugging messages to be enabled dynamicallyChuck Lever3-7/+39
As a convenience, introduce a kernel command line option to enable NFSROOT debugging messages. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-09-17NFS: Clean up nfsroot.cChuck Lever1-418/+1
Clean up: now that mount option parsing for nfsroot is handled in fs/nfs/super.c, remove code in fs/nfs/nfsroot.c that is no longer used. This includes code that constructs the legacy nfs_mount_data structure, and code that does a MNT call to the server. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-09-17NFS: Use super.c for NFSROOT mount option parsingChuck Lever3-17/+187
Replace duplicate code in NFSROOT for mounting an NFS server on '/' with logic that uses the existing mainline text-based logic in the NFS client. Add documenting comments where appropriate. Note that this means NFSROOT mounts now use the same default settings as v2/v3 mounts done via mount(2) from user space. vers=3,tcp,rsize=<negotiated default>,wsize=<negotiated default> As before, however, no version/protocol negotiation with the server is done. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-09-17NFS: Clean up NFSROOT command line parsingChuck Lever1-9/+23
Clean up: To reduce confusion, rename nfs_root_name as nfs_root_parms, as this buffer contains more than just the name of the remote server. Introduce documenting comments around nfs_root_setup(). Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-09-17NFS: Remove \t from mount debugging messageChuck Lever1-1/+1
During boot, a random character is displayed instead of a tab. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-08-29SUNRPC: Don't truncate tail data unnecessarily in xdr_shrink_pagelenTrond Myklebust1-1/+10
If we have unused buffer space, then we should make use of that rather than unnecessarily truncating the message. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-08-29sunrpc: simplify xdr_shrink_pagelen use of "copy"Benny Halevy1-4/+3
The "copy" variable value can be computed using the existing logic rather than repeating it. Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-08-29sunrpc: don't use the copy variable in nested blockBenny Halevy1-2/+1
to clean up the code "copy" will be set prior to the block hence it mustn't be used there. Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-08-29sunrpc: clean up xdr_shrink_pagelen use of temporary pointerBenny Halevy1-2/+1
char *p is used only as a shorthand for tail->iov_base + len in a nested block. Move it there. Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-08-29sunrpc: don't shorten buflen twice in xdr_shrink_pagelenBenny Halevy1-2/+1
On Jan. 14, 2009, 2:50 +0200, andros@netapp.com wrote: > From: Andy Adamson <andros@netapp.com> > > The buflen is reset for all cases at the end of xdr_shrink_pagelen. > The data left in the tail after xdr_read_pages is not processed when the > buflen is incorrectly set. Note that in this case we also lose (len - tail->iov_len) bytes from the buffered data in pages. Reported-by: Andy Adamson <andros@netapp.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-09-14 14:45:53 +0000