summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2009-06-18mm: Extend gfp masking to the page allocatorBenjamin Herrenschmidt5-25/+18
The page allocator also needs the masking of gfp flags during boot, so this moves it out of slab/slub and uses it with the page allocator as well. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-18Merge branch 'for-linus' of git://neil.brown.name/mdLinus Torvalds16-663/+588
* 'for-linus' of git://neil.brown.name/md: (39 commits) md/raid5: correctly update sync_completed when we reach max_resync md/raid5: add missing call to schedule() after prepare_to_wait() md/linear: use call_rcu to free obsolete 'conf' structures. md linear: Protecting mddev with rcu locks to avoid races md: Move check for bitmap presence to personality code. md: remove chunksize rounding from common code. md: raid0/linear: ensure device sizes are rounded to chunk size. md: move assignment of ->utime so that it never gets skipped. md: Push down reconstruction log message to personality code. md: merge reconfig and check_reshape methods. md: remove unnecessary arguments from ->reconfig method. md: raid5: check stripe cache is large enough in start_reshape md: raid0: chunk_sectors cleanups. md: fix some comments. md/raid5: Use is_power_of_2() in raid5_reconfig()/raid6_reconfig(). md: convert conf->chunk_size and conf->prev_chunk to sectors. md: Convert mddev->new_chunk to sectors. md: Make mddev->chunk_size sector-based. md: raid0 :Enables chunk size other than powers of 2. md: prepare for non-power-of-two chunk sizes ...
2009-06-18MN10300: Add support for new ELF relocs in kernel modulesMark Salter2-3/+38
Add support for new relocs which may show up in MN10300 kernel modules due to linker relaxation. Signed-off-by: Mark Salter <msalter@redhat.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-18lib: add lib/gcd.cFlorian Fainelli3-1/+27
This patch adds lib/gcd.c which contains a greatest common divider implementation taken from sound/core/pcm_timer.c Several usages of this new library function will be sent to subsystem maintainers. [akpm@linux-foundation.org: use swap() (pointed out by Joe)] [akpm@linux-foundation.org: just add gcd.o to obj-y, remove Kconfig changes] Signed-off-by: Florian Fainelli <florian@openwrt.org> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Takashi Iwai <tiwai@suse.de> Cc: Simon Horman <horms@verge.net.au> Cc: Julius Volz <juliusv@google.com> Cc: David S. Miller <davem@davemloft.net> Cc: Patrick McHardy <kaber@trash.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-18LinuxPPS: core supportRodolfo Giometti14-0/+1249
This patch adds the kernel side of the PPS support currently named "LinuxPPS". PPS means "pulse per second" and a PPS source is just a device which provides a high precision signal each second so that an application can use it to adjust system clock time. Common use is the combination of the NTPD as userland program with a GPS receiver as PPS source to obtain a wallclock-time with sub-millisecond synchronisation to UTC. To obtain this goal the userland programs shoud use the PPS API specification (RFC 2783 - Pulse-Per-Second API for UNIX-like Operating Systems, Version 1.0) which in part is implemented by this patch. It provides a set of chars devices, one per PPS source, which can be used to get the time signal. The RFC's functions can be implemented by accessing to these char devices. Signed-off-by: Rodolfo Giometti <giometti@linux.it> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Greg KH <greg@kroah.com> Cc: Randy Dunlap <randy.dunlap@oracle.com> Cc: Kay Sievers <kay.sievers@vrfy.org> Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Michael Kerrisk <mtk.manpages@googlemail.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-18gru: copyright fixesJack Steiner2-8/+28
Fix the copyright statements in a couple of GRU files. No functional changes are being made. Signed-off-by: Jack Steiner <steiner@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-18gru: remove references to the obsolete global status handleJack Steiner1-2/+0
Delete references to the SGI GRU GSH hardware resources. These GRU resources have been deleted from the hardware. (These resources have never benn used, anyway). Signed-off-by: Jack Steiner <steiner@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-18gru: fixes to grudump utilityJack Steiner2-4/+8
Minor fixes to the SGI GRU grudump facility: - fix address where user data is written - add gru number to data passed to user - indicate if context is locked Signed-off-by: Jack Steiner <steiner@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-18gru: fix potential use-after-free when purging GRU tlbsJack Steiner1-1/+3
Fix potential SGI GRU bug that could cause a use-after-free. If one thread in a task is flushing the GRU and another thread destroys the GRU context, there is the potential to access a table after it has been freed. Copy the gms pointer to a local variable before unlocking the gts table. Note that no refcnt is needed for the gms - the reference is held indirectly by the task's mm_struct. Signed-off-by: Jack Steiner <steiner@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-18gru: add user request to specify gru sliceJack Steiner4-1/+13
Add a user request to specify the gru instruction slice parameter for user contexts. Signed-off-by: Jack Steiner <steiner@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-18gru: generic infrastructure for context optionsJack Steiner5-13/+35
Change the user GRU request for specifying the "task_slice" option to use a generic infrastructure that can be expanded in the future to include additional context options. No new capabilities are added with this patch. Signed-off-by: Jack Steiner <steiner@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-18gru: cleanup gru inline functionsJack Steiner1-17/+16
Cleanup of GRU inline functions to eliminate unnecessary inline code. Update function descriptions. Signed-off-by: Jack Steiner <steiner@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-18gru: delete user request for fetching chiplet statusJack Steiner2-41/+0
Delete the user request for fetching the status of a GRU chiplet. This request has been made obsolete by other changes. Note: this is not a change to a user API - there are no compatibility issues with this change. Signed-off-by: Jack Steiner <steiner@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-18gru: collect per-context user statisticsJack Steiner5-0/+52
Collect GRU statistics for each user GRU context. Statistics are kept for TLB misses & content resource contention. Add user request for retrieving the statistics. Signed-off-by: Jack Steiner <steiner@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-18gru: fix automatic retry of gru instruction failuresJack Steiner1-3/+2
Fix bug in automatic retry of GRU instruction failures. CBR substatus (message queue failure) was being checked incorrectly. Signed-off-by: Jack Steiner <steiner@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-18gru: add user request to explicitly unload a gru contextJack Steiner3-28/+41
Add user function to explicitly unload GRU kernel contexts from the GRU. Only contexts that are not in-use will be unloaded. This function is primarily for testing. It is not expected that this will be used in normal production systems. Signed-off-by: Jack Steiner <steiner@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-18gru: fix cache coherency issues with instruction retryJack Steiner4-4/+14
Fix two problems related to GRU instruction failures. Cache coherency is not maintained for CBEs except when loading or unloading contexts. When reading a CBE to extract error information, the CBE must first be flushed from the cache. The function that reads kerrnel CBEs was reading the wrong CBE. Signed-off-by: Jack Steiner <steiner@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-18gru: update to rev 0.9 of gru specJack Steiner6-11/+24
Update GRU driver to the latest version of the GRU spec. This consists of minor updates: - changes & additions to error status bits - new restriction on handling of TLB misses while in FMM mode - new field (not used by software) in TFH Signed-off-by: Jack Steiner <steiner@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-18gru: update gru kernel self testsJack Steiner4-16/+142
Change the kernel self tests that can be optionally executed on GRU initialization. This is primarily for testing. Eliminate the BUG statements on failure and return bad status. Add ioctl interface to execute the tests on demand. Signed-off-by: Jack Steiner <steiner@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-18gru: support for asynchronous gru instructionsJack Steiner3-20/+213
Add support for asynchronous GRU instructions. Currently, asynchronous instructions are supported only for GRU instructions issued by the kernel. [akpm@linux-foundation.org: build fix] Signed-off-by: Jack Steiner <steiner@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-18gru: support instruction completion interruptsJack Steiner3-7/+29
Add support for interrupts generated by GRU instruction completion. Previously, the only interrupts were for TLB misses. The hardware also supports interrupts on instruction completion. This will be supported for instructions issued by the kernel. Signed-off-by: Jack Steiner <steiner@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-18gru: check context state on reloadJack Steiner2-9/+25
Check whether the gru state being loaded into a gru is from a new context or a previously unloaded context. If new, simply zero out the hardware context; if unloaded and valid, reload the old state. This change is primarily for reloading kernel contexts where the previous is not required to be saved. Signed-off-by: Jack Steiner <steiner@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-18gru: fix handling of mesq failuresJack Steiner1-9/+24
Fix endcase in handling GRU message queue failures due to NACKs of PUT requests. Must ensure that the "present" bits are cleared before resending the message. Signed-off-by: Jack Steiner <steiner@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-18gru: support contexts with zero dsrs or cbrsJack Steiner2-6/+4
Support alocation of GRU contexts that contain zero DSR or CBR resources. Some instructions do not require DSR resources. Contexts without CBR resources are useful for diagnostics. Signed-off-by: Jack Steiner <steiner@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-18gru: change resource assignment for kernel threadsJack Steiner6-105/+184
Change the way GRU resources are assigned for kernel threads. GRU contexts for kernel threads are now allocated on demand and can be stolen by user processes when idle. This allows MPI jobs to use ALL of the GRU resources when the kernel is not using them. Signed-off-by: Jack Steiner <steiner@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-18gru: support cch_allocate for kernel threadsJack Steiner4-19/+17
Change the interface to cch_allocate so that it can be used to allocate GRU contexts for kernel threads. Kernel threads use the GRU in unmapped mode and do not require ASIDs for the GRU TLB. Signed-off-by: Jack Steiner <steiner@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-18gru: change context load and unloadJack Steiner3-7/+11
Remove "static" from the functions for loading/unloading GRU contexts. These functions will be called from other GRU files. Fix bug in unlocking gru context. Signed-off-by: Jack Steiner <steiner@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-18gru: dynamic allocation of kernel contextsJack Steiner2-29/+33
Change the interface to gru_alloc_gts() so that it can be used to allocate GRU contexts for kernel threads. Kernel threads do not have vdata structures for the GRU contexts. The GRU resource count are now passed explicitly instead of inside the vdata structure. Signed-off-by: Jack Steiner <steiner@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-18gru: dump chiplet stateJack Steiner5-1/+267
Add support for dumpping the state of an entire GRU chiplet. Signed-off-by: Jack Steiner <steiner@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-18gru: bug fixes for GRU exception handlingJack Steiner6-26/+52
Bug fixes for GRU exception handling. Additional fields from the CBR must be returned to the user to allow the user to correctly diagnose GRU exceptions. Handle endcase in TFH TLB miss handling. Verify that TFH actually indicates a pending exception. Signed-off-by: Jack Steiner <steiner@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-18kexec: sysrq: simplify sysrq-c handlerNeil Horman1-9/+6
Currently the sysrq-c handler is bit over-engineered. Its behavior is dependent on a few compile time and run time factors that alter its behavior which is really unnecessecary. If CONFIG_KEXEC is not configured, sysrq-c, crashes the system with a NULL pointer dereference. If CONFIG_KEXEC is configured, it calls crash_kexec directly, which implies that the kexec kernel will either be booted (if its been previously loaded), or it will simply do nothing (the no kexec kernel has been loaded). It would be much easier to just simplify the whole thing to dereference a NULL pointer all the time regardless of configuration. That way, it will always try to crash the system, and if a kexec kernel has been loaded into reserved space, it will still boot from the page fault trap handler (assuming panic_on_oops is set appropriately). [akpm@linux-foundation.org: build fix] Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: Vivek Goyal <vgoyal@redhat.com> Cc: Brayan Arraes <brayan@yack.com.br> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-18w1-gpio: add external pull-up enable callbackDaniel Mack2-0/+36
On embedded devices, sleep mode conditions can be tricky to handle, Especially when processors tend to pull-down the w1 bus during sleep. Bus slaves (such as the ds2760) may interpret this as a reason for power-down conditions and entirely switch off the device. This patch adds a callback function pointer to let users switch on and off the external pull-up resistor. This lets the outside world know whether the processor is currently actively driving the bus or not. When this callback is not provided, the code behaviour won't change. Signed-off-by: Daniel Mack <daniel@caiaq.de> Acked-by: Ville Syrjala <syrjala@sci.fi> Acked-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-18dma-mapping: ia64: add CONFIG_DMA_API_DEBUG supportFUJITA Tomonori2-1/+8
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: Joerg Roedel <joerg.roedel@amd.com> Cc: Ingo Molnar <mingo@elte.hu> Acked-by: "Luck, Tony" <tony.luck@intel.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc; "David S. Miller" <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-18dma-mapping: ia64: use asm-generic/dma-mapping-common.hFUJITA Tomonori1-99/+3
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: Joerg Roedel <joerg.roedel@amd.com> Cc: Ingo Molnar <mingo@elte.hu> Acked-by: "Luck, Tony" <tony.luck@intel.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc; "David S. Miller" <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-18dma-mapping: x86: use asm-generic/dma-mapping-common.hFUJITA Tomonori2-171/+3
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: Joerg Roedel <joerg.roedel@amd.com> Acked-by: Ingo Molnar <mingo@elte.hu> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-18dma-mapping: add asm-generic/dma-mapping-common.hFUJITA Tomonori1-0/+190
We unified x86 and IA64's handling of multiple dma mapping operations (struct dma_map_ops in linux/dma-mapping.h) so we can remove duplication in their arch/include/asm/dma-mapping.h. This patchset adds include/asm-generic/dma-mapping-common.h that provides some generic dma mapping function definitions for the users of struct dma_map_ops. This enables us to remove about 100 lines. This also enables us to easily add CONFIG_DMA_API_DEBUG support, which only x86 supports for now. The 4th patch adds CONFIG_DMA_API_DEBUG support to IA64 by adding only 8 lines. This patch: This header file provides some mapping function definitions that the users of struct dma_map_ops can use. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: Joerg Roedel <joerg.roedel@amd.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-18gcov: enable GCOV_PROFILE_ALL for x86_64Peter Oberparleiter6-1/+7
Enable gcov profiling of the entire kernel on x86_64. Required changes include disabling profiling for: * arch/kernel/acpi/realmode and arch/kernel/boot/compressed: not linked to main kernel * arch/vdso, arch/kernel/vsyscall_64 and arch/kernel/hpet: profiling causes segfaults during boot (incompatible context) Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Huang Ying <ying.huang@intel.com> Cc: Li Wei <W.Li@Sun.COM> Cc: Michael Ellerman <michaele@au1.ibm.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Heiko Carstens <heicars2@linux.vnet.ibm.com> Cc: Martin Schwidefsky <mschwid2@linux.vnet.ibm.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: WANG Cong <xiyou.wangcong@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Jeff Dike <jdike@addtoit.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-18gcov: add gcov profiling infrastructurePeter Oberparleiter13-5/+1726
Enable the use of GCC's coverage testing tool gcov [1] with the Linux kernel. gcov may be useful for: * debugging (has this code been reached at all?) * test improvement (how do I change my test to cover these lines?) * minimizing kernel configurations (do I need this option if the associated code is never run?) The profiling patch incorporates the following changes: * change kbuild to include profiling flags * provide functions needed by profiling code * present profiling data as files in debugfs Note that on some architectures, enabling gcc's profiling option "-fprofile-arcs" for the entire kernel may trigger compile/link/ run-time problems, some of which are caused by toolchain bugs and others which require adjustment of architecture code. For this reason profiling the entire kernel is initially restricted to those architectures for which it is known to work without changes. This restriction can be lifted once an architecture has been tested and found compatible with gcc's profiling. Profiling of single files or directories is still available on all platforms (see config help text). [1] http://gcc.gnu.org/onlinedocs/gcc/Gcov.html Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Huang Ying <ying.huang@intel.com> Cc: Li Wei <W.Li@Sun.COM> Cc: Michael Ellerman <michaele@au1.ibm.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Heiko Carstens <heicars2@linux.vnet.ibm.com> Cc: Martin Schwidefsky <mschwid2@linux.vnet.ibm.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: WANG Cong <xiyou.wangcong@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Jeff Dike <jdike@addtoit.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-18seq_file: add function to write binary dataPeter Oberparleiter2-0/+21
seq_write() can be used to construct seq_files containing arbitrary data. Required by the gcov-profiling interface to synthesize binary profiling data files. Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Huang Ying <ying.huang@intel.com> Cc: Li Wei <W.Li@Sun.COM> Cc: Michael Ellerman <michaele@au1.ibm.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Heiko Carstens <heicars2@linux.vnet.ibm.com> Cc: Martin Schwidefsky <mschwid2@linux.vnet.ibm.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: WANG Cong <xiyou.wangcong@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Jeff Dike <jdike@addtoit.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-18kernel: constructor supportPeter Oberparleiter7-0/+54
Call constructors (gcc-generated initcall-like functions) during kernel start and module load. Constructors are e.g. used for gcov data initialization. Disable constructor support for usermode Linux to prevent conflicts with host glibc. Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Acked-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: WANG Cong <xiyou.wangcong@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Jeff Dike <jdike@addtoit.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Huang Ying <ying.huang@intel.com> Cc: Li Wei <W.Li@Sun.COM> Cc: Michael Ellerman <michaele@au1.ibm.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Heiko Carstens <heicars2@linux.vnet.ibm.com> Cc: Martin Schwidefsky <mschwid2@linux.vnet.ibm.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-18edac: Kconfig: fix the meaning of EDAC abbreviationGeunSik Lim1-1/+1
Fix the meaning of EDAC(Error Detection And Correction) correctly. [akpm@linux-foundation.org: add missing space] Signed-off-by: GeunSik Lim <geunsik.lim@samsung.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Acked-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-18edac: add missing __devexit_p()Mike Frysinger1-1/+1
The remove function uses __devexit, so the .remove assignment needs __devexit_p() to fix a build error with hotplug disabled. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Cc: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-18edac: cpc925 MC platform device setupHarry Ciao2-0/+99
Fix up the number of cells for the values of CPC925 Memory Controller, and setup related platform device during system booting up, against which CPC925 Memory Controller EDAC driver would be matched. Signed-off-by: Harry Ciao <qingtao.cao@windriver.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Michael Ellerman <michael@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Kumar Gala <galak@gate.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-18edac: add edac_device_alloc_index()Harry Ciao3-2/+16
Add edac_device_alloc_index(), because for MAPLE platform there may exist several EDAC driver modules that could make use of edac_device_ctl_info structure at the same time. The index allocation for these structures should be taken care of by EDAC core. [akpm@linux-foundation.org: cleanups] Signed-off-by: Harry Ciao <qingtao.cao@windriver.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Michael Ellerman <michael@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Kumar Gala <galak@gate.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-18edac: add CPC925 Memory Controller driverHarry Ciao3-0/+1027
Introduce IBM CPC925 EDAC driver, which makes use of ECC, CPU and HyperTransport Link error detections and corrections on the IBM CPC925 Bridge and Memory Controller. [akpm@linux-foundation.org: cleanup] Signed-off-by: Harry Ciao <qingtao.cao@windriver.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Michael Ellerman <michael@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Kumar Gala <galak@gate.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-18futex: documentation: fix inconsistent description of futex list_op_pendingMatt Helsley1-2/+2
Strictly speaking list_op_pending points to the 'lock entry', not the 'lock word' (which is actually at 'offset' from 'lock entry'). We can infer this based on reading the code in kernel/futex.c: struct robust_list __user *entry, *next_entry, *pending; ... if (fetch_robust_entry(&pending, &head->list_op_pending, &pip)) return; ... if (pending) handle_futex_death((void __user *)pending + futex_offset, curr, pip); Which is also consistent with the rest of the docs on robust futex lists. Signed-off-by: Matt Helsley <matthltc@us.ibm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Thomas Gleixner <tglx@linuxtronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-18ipcns: move free_ipcs() protoAlexey Dobriyan2-5/+2
Function is really private to ipc/ and avoid struct kern_ipc_perm forward declaration. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Reviewed-by: WANG Cong <xiyou.wangcong@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-18ipcns: make free_ipc_ns() staticAlexey Dobriyan2-25/+24
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Reviewed-by: WANG Cong <xiyou.wangcong@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-18nsproxy: extract create_nsproxy()Alexey Dobriyan1-12/+7
clone_nsproxy() does useless copying of old nsproxy -- every pointer will be rewritten to new ns or to old ns. Remove copying, rename clone_nsproxy(), create_nsproxy() will be used by C/R code to create fresh nsproxy on restart. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Acked-by: Serge Hallyn <serue@us.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-18ipcns: extract create_ipc_ns()Alexey Dobriyan1-7/+2
clone_ipc_ns() is misnamed, it doesn't clone anything and doesn't use passed parameter. Rename it. create_ipc_ns() will be used by C/R to create fresh ipcns. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Acked-by: Serge Hallyn <serue@us.ibm.com> Reviewed-by: WANG Cong <xiyou.wangcong@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-03 07:46:47 +0000