summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2009-10-12net: Generalize socket rx gap / receive queue overflow cmsgNeil Horman36-21/+88
Create a new socket level option to report number of queue overflows Recently I augmented the AF_PACKET protocol to report the number of frames lost on the socket receive queue between any two enqueued frames. This value was exported via a SOL_PACKET level cmsg. AFter I completed that work it was requested that this feature be generalized so that any datagram oriented socket could make use of this option. As such I've created this patch, It creates a new SOL_SOCKET level option called SO_RXQ_OVFL, which when enabled exports a SOL_SOCKET level cmsg that reports the nubmer of times the sk_receive_queue overflowed between any two given frames. It also augments the AF_PACKET protocol to take advantage of this new feature (as it previously did not touch sk->sk_drops, which this patch uses to record the overflow count). Tested successfully by me. Notes: 1) Unlike my previous patch, this patch simply records the sk_drops value, which is not a number of drops between packets, but rather a total number of drops. Deltas must be computed in user space. 2) While this patch currently works with datagram oriented protocols, it will also be accepted by non-datagram oriented protocols. I'm not sure if thats agreeable to everyone, but my argument in favor of doing so is that, for those protocols which aren't applicable to this option, sk_drops will always be zero, and reporting no drops on a receive queue that isn't used for those non-participating protocols seems reasonable to me. This also saves us having to code in a per-protocol opt in mechanism. 3) This applies cleanly to net-next assuming that commit 977750076d98c7ff6cbda51858bb5a5894a9d9ab (my af packet cmsg patch) is reverted Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-12Revert "af_packet: add interframe drop cmsg (v6)"David S. Miller2-35/+0
This reverts commit 977750076d98c7ff6cbda51858bb5a5894a9d9ab. Neil is reimplementing this generically, outside of AF_PACKET. Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-11ipv6 sit: Set relay to 0.0.0.0 directly if relay_prefixlen == 0.YOSHIFUJI Hideaki / 吉藤英明1-3/+6
ipv6 sit: Set relay to 0.0.0.0 directly if relay_prefixlen == 0. Do not use bit-shift if relay_prefixlen == 0; relay_prefix << 32 does not result in 0. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-11ipv6 sit: Fix 6rd relay address.YOSHIFUJI Hideaki / 吉藤英明1-2/+2
ipv6 sit: Fix 6rd relay address. Relay's address should be extracted from real IPv6 address instead of configured prefix. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-11ipv6 sit: Ensure to initialize 6rd parameters.YOSHIFUJI Hideaki / 吉藤英明1-4/+6
ipv6 sit: Ensure to initialize 6rd parameters. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-11cnic: Add main functions to support bnx2x devices.Michael Chan1-0/+1742
Add iSCSI support for bnx2x devices. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Shmulik Ravid - Rabinovitz <shmulikr@broadcom.com> Acked-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-11cnic: Add bnx2x data structures.Michael Chan4-1/+2001
Add hardware and software structures for bnx2x devices. Signed-off-by: Michael Chan <mchan@broadcom.com> Acked-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-11cnic: Refactor some code.Michael Chan1-18/+46
Refactor ring init. code for subsequent 10G patches. Also add rtnl_lock() in cnic_uio_open() to prevent race condition with netdev events. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-11bnx2x: Add main CNIC interface functions.Michael Chan3-2/+404
Add the main CNIC registration, callback, MAC addr. setup functions. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Shmulik Ravid - Rabinovitz <shmulikr@broadcom.com> Acked-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-11bnx2x: Add hw init code to support iSCSI.Michael Chan2-69/+200
Add code to initialize hardware blocks used for iSCSI. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Shmulik Ravid - Rabinovitz <shmulikr@broadcom.com> Acked-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-11bnx2x: Refactor MAC address setup code.Michael Chan2-52/+114
For iSCSI MAC address setup in later patches. Signed-off-by: Shmulik Ravid - Rabinovitz <shmulikr@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Acked-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-11bnx2x: Refactor bnx2x_sp_post().Michael Chan1-24/+38
Some of the SPQ (slow-path queue) operations will be used by the cnic code in later patches. Signed-off-by: Shmulik Ravid - Rabinovitz <shmulikr@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Acked-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-11qlge: Add CBFC pause frame counters to ethtool stats.Ron Mercer2-0/+90
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-11qlge: Don't fail open when port is not initialized.Ron Mercer1-4/+2
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-11qlge: Get rid of firmware handler debug code.Ron Mercer1-21/+0
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-11qlge: Remove inline math for small rx buf mapping.Ron Mercer2-8/+9
rx_ring->sbq_buf_len now holds the length of the mapped portion of the buffer rather than the overall length. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-11qlge: Store firmware revision as early as possible.Ron Mercer1-0/+1
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-11qlge: Add handler for DCBX firmware event.Ron Mercer1-0/+3
The driver has nothing to do, but this marker prevents the event from showing up 'not handled'. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-11qlge: Set PCIE max read request size.Ron Mercer1-0/+7
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-11qlge: Remove explicit setting of PCI Dev CTL reg.Ron Mercer1-15/+1
Remove explicit setting of error reporting bits. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-11Merge branch 'master' of ↵David S. Miller37-260/+464
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
2009-10-09Merge branch 'master' of ↵David S. Miller141-4538/+6262
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
2009-10-09net: Link in PHY drivers before others.David S. Miller1-4/+4
We need PHY drivers to initialize in a static kernel before the MAC drivers that use them. So link them in first. Based upon a report by Felix Radensky. Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-09wireless: make wireless drivers select coreJohannes Berg1-0/+1
It is somewhat non-sensical to allow selecting wireless drivers without showing wireless core code options, and since the wext refactoring this has made it possible to generate configurations that will not build. Avoid this and make wireless drivers select the wireless options. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-09libertas: depend on CONFIG_CFG80211Holger Schurig1-1/+1
Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-09libertas: remove double assignment of dev->netdev_opsLuis R. Rodriguez1-1/+0
This came in through the patch titled: libertas: first stab at cfg80211 support I only noticed it because it breaks compat-wireless :) Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Acked-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-09ath9k: use right parameter for MODULE_PARM_DESC() for debugLuis R. Rodriguez1-1/+1
Reported-by: sujith.manoharan@atheros.com Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-08ixgbe: Fix KR to KX fail over for Mezzanine cardsDon Skidmore2-3/+134
This patch allows the recently added backplane device IDs that support KR to fail over to KX during link setup. This is accomplished by the new MAC link setup function ixgbe_setup_mac_link_smartspeed(). Comments were also updated to better document the reason for the delays chosen for KX, KX4, BX, BX4 and KR connections. Signed-off-by: Don Skidmore <don.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-08ixgbe: add support for 82599 based Express Module X520-P2Don Skidmore3-0/+4
This patch will add the device ID for the 82599-based Ethernet Express Module X520-P2 SFI card. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-08ibm_newemac: Added 16K Tx FIFO size support for EMAC4Dave Mitchell2-2/+6
Some of the EMAC V4 implementations support 16K Tx FIFOs. This patch adds support for this functionality and fixes typos in the Tx FIFO size error messages. Signed-off-by: Dave Mitchell <dmitchell@appliedmicro.com> Acked-by: Prodyut Hazarika <phazarika@appliedmicro.com> Acked-by: Victor Gallardo <vgallardo@appliedmicro.com> Acked-by: Loc Ho <lho@appliedmicro.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-08qlge: Add disable/enable firmare irqs to handler.Ron Mercer1-0/+4
This was accidentally omitted from one of the previous patches for firmware event handling. The handler needs to the enable firmware irq mask when it's done processing or it may not get any more events interrupts. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-08qlge: Restore rx mode after internal reset.Ron Mercer1-0/+6
Call set_multi API after reset recovery. This was exposed by tripping tx_timeout. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-08qlge: Fix chip reset process.Ron Mercer3-0/+106
Add wait for NIC fifo and MGMNT fifo to empty before applying reset. Otherwise broken frames can be processed by management processor and cause it to hang. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-08qlge: Fix RX multicast filter settings.Ron Mercer1-10/+39
The addresses were being added to the filter properly, but were not being enabled. This adds enable bit to filter write. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-08qlge: Fix frame routing for multicast frames.Ron Mercer1-2/+2
Broadcast/multicast should always be routed to the default (zeroeth) rx ring. Broadcast frames are already routed correctly. This fixes routing for multicast frames. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-08qlge: Fix frame routing issue related to bonding.Ron Mercer1-0/+7
Currently frames are routed based on their type and MAC address. This patch adds the port number on which the frame arrived to the routing. This prevents problems in the case where both interfaces have the same MAC address in a routing configuration. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-08qlge: Fix RSS hashing values.Ron Mercer2-11/+13
Fix RX queue table size and change from random to default hash values. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-08ipv6: Fix the size overflow of addrconf_sysctl arrayJin Dongming1-0/+1
(This patch fixes bug of commit f7734fdf61ec6bb848e0bafc1fb8bad2c124bb50 title "make TLLAO option for NA packets configurable") When the IPV6 conf is used, the function sysctl_set_parent is called and the array addrconf_sysctl is used as a parameter of the function. The above patch added new conf "force_tllao" into the array addrconf_sysctl, but the size of the array was not modified, the static allocated size is DEVCONF_MAX + 1 but the real size is DEVCONF_MAX + 2, so the problem is that the function sysctl_set_parent accessed wrong address. I got the following information. Call Trace: [<ffffffff8106085d>] sysctl_set_parent+0x29/0x3e [<ffffffff8106085d>] sysctl_set_parent+0x29/0x3e [<ffffffff8106085d>] sysctl_set_parent+0x29/0x3e [<ffffffff8106085d>] sysctl_set_parent+0x29/0x3e [<ffffffff8106085d>] sysctl_set_parent+0x29/0x3e [<ffffffff810622d5>] __register_sysctl_paths+0xde/0x272 [<ffffffff8110892d>] ? __kmalloc_track_caller+0x16e/0x180 [<ffffffffa00cfac3>] ? __addrconf_sysctl_register+0xc5/0x144 [ipv6] [<ffffffff8141f2c9>] register_net_sysctl_table+0x48/0x4b [<ffffffffa00cfaf5>] __addrconf_sysctl_register+0xf7/0x144 [ipv6] [<ffffffffa00cfc16>] addrconf_init_net+0xd4/0x104 [ipv6] [<ffffffff8139195f>] setup_net+0x35/0x82 [<ffffffff81391f6c>] copy_net_ns+0x76/0xe0 [<ffffffff8107ad60>] create_new_namespaces+0xf0/0x16e [<ffffffff8107afee>] copy_namespaces+0x65/0x9f [<ffffffff81056dff>] copy_process+0xb2c/0x12c3 [<ffffffff810576e1>] do_fork+0x14b/0x2d2 [<ffffffff8107ac4e>] ? up_read+0xe/0x10 [<ffffffff81438e73>] ? do_page_fault+0x27a/0x2aa [<ffffffff8101044b>] sys_clone+0x28/0x2a [<ffffffff81011fb3>] stub_clone+0x13/0x20 [<ffffffff81011c72>] ? system_call_fastpath+0x16/0x1b And the information of IPV6 in .config is as following. IPV6 in .config: CONFIG_IPV6=m CONFIG_IPV6_PRIVACY=y CONFIG_IPV6_ROUTER_PREF=y CONFIG_IPV6_ROUTE_INFO=y CONFIG_IPV6_OPTIMISTIC_DAD=y CONFIG_IPV6_MIP6=m CONFIG_IPV6_SIT=m # CONFIG_IPV6_SIT_6RD is not set CONFIG_IPV6_NDISC_NODETYPE=y CONFIG_IPV6_TUNNEL=m CONFIG_IPV6_MULTIPLE_TABLES=y CONFIG_IPV6_SUBTREES=y CONFIG_IPV6_MROUTE=y CONFIG_IPV6_PIMSM_V2=y # CONFIG_IP_VS_IPV6 is not set CONFIG_NF_CONNTRACK_IPV6=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m I confirmed this patch fixes this problem. Signed-off-by: Jin Dongming <jin.dongming@np.css.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-08Merge branch 'master' of ↵David S. Miller19-156/+184
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2009-10-08cfg80211: fix netns error unwinding bugJohannes Berg1-1/+2
The error unwinding code in set_netns has a bug that will make it run into a BUG_ON if passed a bad wiphy index, fix by not trying to unlock a wiphy that doesn't exist. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-08netlink: fix typo in initializationJiri Pirko1-1/+1
Commit 9ef1d4c7c7aca1cd436612b6ca785b726ffb8ed8 ("[NETLINK]: Missing initializations in dumped data") introduced a typo in initialization. This patch fixes this. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-07znet: Don't claim DMA lock around free_dma() calls.David S. Miller1-8/+0
It's not necessary and it's illegal too. Reported-by: Alexander Strakh <strakh@ispras.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-07can: add TI CAN (HECC) driverAnant Gole4-0/+1054
TI HECC (High End CAN Controller) module is found on many TI devices. It has 32 hardware mailboxes with full implementation of CAN protocol 2.0B with bus speeds up to 1Mbps. Specifications of the module are available on TI web <http://www.ti.com> Signed-off-by: Anant Gole <anantgole@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-07ixgb: Use the instance of net_device_stats from net_device.Ajit Khaparde3-46/+45
Since net_device has an instance of net_device_stats, we can remove the instance of this from the private adapter structure. Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-07qlge: Use the instance of net_device_stats from net_device.Ajit Khaparde2-7/+6
Since net_device has an instance of net_device_stats, we can remove the instance of this from the private adapter structure. Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-07e1000: Use the instance of net_device_stats from net_device.Ajit Khaparde3-27/+27
Since net_device has an instance of net_device_stats, we can remove the instance of this from the adapter structure. Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-07igb: Use the instance of net_device_stats from net_device.Ajit Khaparde3-30/+30
Since net_device has an instance of net_device_stats, we can remove the instance of this from the adapter structure. Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-07ixgbe: Use the instance of net_device_stats from net_device.Ajit Khaparde3-33/+34
Since net_device has an instance of net_device_stats, we can remove the instance of this from the private adapter structure. Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-07myri10ge: Use the instance of net_device_stats from net_device.Ajit Khaparde1-3/+2
Since net_device has an instance of net_device_stats, we can remove the instance of this from the private myri10ge_priv structure. Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-07netxen: Use the instance of net_device_stats from net_device.Ajit Khaparde2-3/+1
Since net_device has an instance of net_device_stats, we can remove the instance of this from the private adapter structure. Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-11 16:06:45 +0000