summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2010-02-12iwlwifi: fix AMSDU Rx after paged Rx patchShanyu Zhao1-1/+4
Previous patch "use paged Rx" broke AMSDU Rx functionality. If an AP sends out A-MSDU packets the station will crash. Fix it by linearizing skbuff for AMSDU packet before handing it to mac80211 since mac80211 doesn't support paged skbuff. This fixes http://bugzilla.intellinuxwireless.org/show_bug.cgi?id=2155 Reported-by: Norbert Preining <preining@logic.at> Signed-off-by: Shanyu Zhao <shanyu.zhao@intel.com> Acked-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-10rtl8187: Add new device IDJelle Martijn Kok1-0/+1
Add new RTL8187B device. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@kernel.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-09iwmc3200wifi: Test of wrong pointer after kzalloc in iwm_mlme_update_bss_table()Roel Kluin1-1/+1
The wrong pointer was tested. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-09ath9k: Fix sequence numbers for PAE framesSujith1-2/+2
Currently, PAE frames are not assigned proper sequence numbers. Since sending PAE frames as part of aggregates breaks crupto with several APs, they are sent as normal MPDUs. Fix the seqeuence number issue by updating the frame with the internal sequence number. Tested-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-08mac80211: fix deferred hardware scan requestsJohannes Berg1-8/+10
Reinette found the reason for the warnings that happened occasionally when a hw-offloaded scan finished; her description of the problem: mac80211 will defer the handling of scan requests if it is busy with management work at the time. The scan requests are deferred and run after the work has completed. When this occurs there are currently two problems. * The scan request for hardware scan is not fully populated with the band and channels to scan not initialized. * When the scan is queued the state is not correctly updated to reflect that a scan is in progress. The problem here is that when the driver completes the scan and calls ieee80211_scan_completed() a warning will be triggered since mac80211 was not aware that a scan was in progress. The reason is that the queued scan work will start the hw scan right away when the hw_scan_req struct has already been allocated. However, in the first pass it will not have been filled, which happens at the same time as setting the bits. To fix this, simply move the allocation after the pending work test as well, so that the first iteration of the scan work will call __ieee80211_start_scan() even in the hardware scan case. Bug-identified-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-08iwlwifi: Fix to set correct ht configurationWey-Yi Guy1-0/+1
iwl_set_rxon_ht() only get called in iwl_post_associate(); which cause possible incorrect ht configuration. Adding the call in iwl_mac_config() if IEEE80211_CONF_CHANGE_CHANNEL flag is set to re-configure and send rxon command. Fixes http://bugzilla.intellinuxwireless.org/show_bug.cgi?id=2146 Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> CC: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-08mac80211: Fix probe request filtering in IBSS modeBenoit Papillault1-1/+1
We only reply to probe request if either the requested SSID is the broadcast SSID or if the requested SSID matches our own SSID. This latter case was not properly handled since we were replying to different SSID with the same length as our own SSID. Signed-off-by: Benoit Papillault <benoit.papillault@free.fr> Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-03ssb: Fix CONFIG_SSB_SDIOHOST typoMichael Buesch1-2/+1
This fixes a CONFIG_SSB_SDIOHOST typo. Signed-off-by: Michael Buesch <mb@bu3sch.de> Reported-by: Christoph Egger <siccegge@stud.informatik.uni-erlangen.de> Tested-By: Albert Herranz <albert_herranz@yahoo.es> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-03b43: Fix throughput regressionLarry Finger2-3/+11
Commit c7ab5ef9bcd281135c21b4732c9be779585181be entitled "b43: implement short slot and basic rate handling" reduced the transmit throughput for my BCM4311 device from 18 Mb/s to 0.7 Mb/s. The basic rate handling portion is OK, the problem is in the short slot handling. Prior to this change, the short slot enable/disable routines were never called. Experimentation showed that the critical part was changing the value at offset 0x0010 in the shared memory. This is supposed to contain the 802.11 Slot Time in usec, but if it is changed from its initial value of zero, performance is destroyed. On the other hand, changing the value in the MMIO register corresponding to the Interframe Slot Time increased performance from 18 to 22 Mb/s. A BCM4306/3 also shows dramatic improvement of the transmit rate from 5.3 to 19.0 Mb/s. Other changes in the patch include removal of the magic number for the MMIO register, and allowing the slot time to be set for any PHY operating in the 2.4 GHz band. Previously, the routine was executed only for G PHYs. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@kernel.org> [Any stable version back through 2.6.28] Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-26mac80211: fix NULL pointer dereference when ftrace is enabledZhu Yi1-1/+1
I got below kernel oops when I try to bring down the network interface if ftrace is enabled. The root cause is drv_ampdu_action() is passed with a NULL ssn pointer in the BA session tear down case. We need to check and avoid dereferencing it in trace entry assignment. BUG: unable to handle kernel NULL pointer dereference Modules linked in: at (null) IP: [<f98fe02a>] ftrace_raw_event_drv_ampdu_action+0x10a/0x160 [mac80211] *pde = 00000000 Oops: 0000 [#1] SMP DEBUG_PAGEALLOC [...] Call Trace: [<f98fdf20>] ? ftrace_raw_event_drv_ampdu_action+0x0/0x160 [mac80211] [<f98dac4c>] ? __ieee80211_stop_rx_ba_session+0xfc/0x220 [mac80211] [<f98d97fb>] ? ieee80211_sta_tear_down_BA_sessions+0x3b/0x50 [mac80211] [<f98dc6f6>] ? ieee80211_set_disassoc+0xe6/0x230 [mac80211] [<f98dc6ac>] ? ieee80211_set_disassoc+0x9c/0x230 [mac80211] [<f98dcbb8>] ? ieee80211_mgd_deauth+0x158/0x170 [mac80211] [<f98e4bdb>] ? ieee80211_deauth+0x1b/0x20 [mac80211] [<f8987f49>] ? __cfg80211_mlme_deauth+0xe9/0x120 [cfg80211] [<f898b870>] ? __cfg80211_disconnect+0x170/0x1d0 [cfg80211] Cc: Johannes Berg <johannes@sipsolutions.net> Cc: stable@kernel.org Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-25ath9k: fix eeprom INI values override for 2GHz-only cardsFelix Fietkau1-4/+3
Among other changes, this commit: commit 06d0f0663e11cab4ec5f2c143a118d71a12fbbe9 Author: Sujith <Sujith.Manoharan@atheros.com> Date: Thu Feb 12 10:06:45 2009 +0530 ath9k: Enable Fractional N mode changed the hw attach code to fix up initialization values only for dual band devices, however the commit message did not give a reason as to why this would be useful or necessary. According to tests by Jorge Boncompte, this breaks at least some 2GHz-only cards, so the code should be changed back to the unconditional INI fixup. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Reported-by: Jorge Boncompte <jorge@dti2.net> Cc: stable@kernel.org Tested-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-25iwlwifi: fix pointer signedness warningJohannes Berg1-2/+2
There are a few station addresses that are char *, instead of the normal u8 *; gcc gives pointer signedness warnings for some of those, so use u8 * consistently. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-19ath9k: fix beacon slot/buffer leakFelix Fietkau1-1/+1
When cleaning up beacon buffers and slots, ath9k currently checks if sc->ah->opmode is set to a beacon related mode before cleaning up buffers. An unfortunate ordering of interface up/down commands can lead to sc->ah->opmode being set to monitor mode, while there are AP interfaces present on the same wiphy. Always cleaning up beacon buffers if present fixes this issue. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-18zd1211rw: adding 0409:0248 to supported device listHin-Tak Leung1-0/+1
Yasuhiro ABE <yadiary@gmail.com> reported success in sourceforge zd1211-dev list. The device is a NEC Aterm WL54GU usb wireless stick. The brand and retail product name NEC, Aterm PA-WL54GU The USB ID's (duh) ID 0409:0248 The chip ID string zd1211rw 1-1:1.0: zd1211b chip 0409:0248 v4810 high 00-1b-8b AL2230S_RF pa0 g--N- The FCC ID unknown Signed-off-by: Hin-Tak Leung <htl10@users.sourceforge.net> Signed-off-by: Yasuhiro ABE <yadiary@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-18p54pci: rx frame length checkChristian Lamparter1-0/+8
A long time ago, a user reported several crashes due to data corruptions which are likely the result of a not-100%-supported, or faulty? PCI bridge. ( http://patchwork.kernel.org/patch/53004/ ) This patch fixes entry #1. "1. p54p_check_rx_ring - skb_over_panic: Under a ping flood or just left running for a bit would panic with a skb_over_panic." As described in the mail: The invalid frame length causes skb_put to bailout and trigger a crash. Note: Simply dropping the frame is problematic, because if its content contains a tx feedback we would lose some portion of the device memory space.... And the driver/mac80211 should handle all other invalid data. Reported-by: Quintin Pitts <geek4linux@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-18mac80211: fix sign error in pid controllerBob Copeland1-1/+1
While testing the pid rate controller in mac80211_hwsim, I noticed that once the controller reached 54 Mbit rates, it would fail to lower the rate when necessary. The debug log shows: 1945 186786 pf_sample 50 3534 3577 50 My interpretation is that the fixed point scaling of the target error value (pf) is incorrect: the error value of 50 compared to a target of 14 case should result in a scaling value of (14-50) = -36 * 256 or -9216, but instead it is (14 * 256)-50, or 3534. Correct this by doing fixed point scaling after subtraction. Signed-off-by: Bob Copeland <me@bobcopeland.com> Acked-by: Stefano Brivio <stefano.brivio@polimi.it> Acked-by: Mattias Nissler <mattias.nissler@gmx.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-18iwlwifi: add license to tracing filesReinette Chatre2-0/+52
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-18iwlwifi: Fix throughput stall issue in HT mode for 5000Wey-Yi Guy1-0/+5
Similar to 6000 and 1000 series, RTS/CTS is the recommended protection mechanism for 5000 series in HT mode based on the HW design. Using RTS/CTS will better protect the inner exchange from interference, especially in highly-congested environment, it also prevent uCode encounter TX FIFO underrun and other HT mode related performance issues. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> CC: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15mac80211: check that ieee80211_set_power_mgmt only handles STA interfaces.Benoit Papillault1-0/+3
ieee80211_set_power_mgmt is meant for STA interfaces only. Moreover, since sdata->u.mgd.mtx is only initialized for STA interfaces, using this code for any other type of interface (like creating a monitor interface) will result in a oops. Cc: stable@kernel.org Signed-off-by: Benoit Papillault <benoit.papillault@free.fr> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-14cfg80211: fix channel setting for wextAbhijeet Kolekar1-0/+1
Patch fixes the bug at http://bugzilla.intellinuxwireless.org/show_bug.cgi?id=2139 Currently we cannot set the channel using wext extension if we have already associated and disconnected. As cfg80211_mgd_wext_siwfreq will not switch the channel if ssid is set. This fixes it by clearing the ssid. Following is the sequence which it tries to fix. modprobe iwlagn iwconfig wlan0 essid "" ifconfig wlan0 down iwconfig wlan0 chan X wext is marked as deprecate.If we use nl80211 we can easily play with setting the channel. Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com> cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-14iwmc3200wifi: Add UMAC wifi headers to the pmkid commandSamuel Ortiz2-0/+5
Without this header, we can trigger a UMAC crash with debug enabled UMACs. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-11cfg80211: fix refcount imbalance when wext is disabledJohannes Berg1-2/+2
When CONFIG_CFG80211_WEXT is not set, there is a refcount imbalance with rdev->opencount, fix that by moving it out of the ifdef. Reported-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-11mac80211: fix queue selection for data frames on monitor interfacesFelix Fietkau1-2/+5
When ieee80211_monitor_select_queue encounters data frames, it selects the WMM AC based on skb->priority and assumes that skb->priority contains a valid 802.1d tag. However this assumption is incorrect, since ieee80211_select_queue has not been called at this point. If skb->priority > 7, an array overrun occurs, which could lead to invalid values, resulting in crashes in the tx path. Fix this by setting skb->priority based on the 802.11 header for QoS frames and using the default AC for all non-QoS frames. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-11iwlwifi: silence buffer overflow warningDan Carpenter1-1/+1
Smatch (and presumably other static checkers) complain that MAX_TID_COUNT is past the end of the array. In the resulting discussion, Zhu Yi pointed out that this value is not used in real life and the assignment was only there to silence a gcc warning. If there were a bug in the surrounding code and the value were used, the WARN_ON(!qc) would print a warning before the crash. Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-08iwlwifi: disable tx on beacon update notificationAbhijeet Kolekar1-20/+25
On beacon change update notification from mac we are not disabling the tx in adhoc mode. Mac sends BSS_CHANGED_BEACON_ENABLED when station leaves IBSS. Driver should indicate uCode to not to send anything on receiving this notification. Functionality to indicate uCode is duplicated across two notifications so created a common function called iwl_set_no_assoc. Fix the issue at http://bugzilla.intellinuxwireless.org/show_bug.cgi?id=2133. Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Tested-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-08iwlwifi: fix iwl_queue_used bug when read_ptr == write_ptrZhu Yi1-1/+1
When txq read_ptr equals to write_ptr, iwl_queue_used should always return false. Because there is no used TFD in this case. This is a complementary fix to the fix already included in commit "iwl3945: fix panic in iwl3945 driver". Both fixes are needed to address the panic below. This problem was discussed on linux-wireless in http://thread.gmane.org/gmane.linux.kernel.wireless.general/43568 <1>[ 7290.414172] IP: [<ffffffffa0dd53a1>] iwl3945_rx_reply_tx+0xc1/0x450 [iwl3945] <4>[ 7290.414205] PGD 0 <1>[ 7290.414214] Thread overran stack, or stack corrupted <0>[ 7290.414229] Oops: 0002 [#1] PREEMPT SMP <0>[ 7290.414246] last sysfs file: /sys/devices/platform/coretemp.1/temp1_input <4>[ 7290.414265] CPU 0 <4>[ 7290.414274] Modules linked in: af_packet nfsd usb_storage usb_libusual cpufreq_powersave exportfs cpufreq_conservative iwl3945 nfs cpufreq_userspace snd_hda_codec_realtek acpi_cpufreq uvcvideo lockd iwlcore snd_hda_intel joydev coretemp nfs_acl videodev snd_hda_codec mac80211 v4l1_compat snd_hwdep sbp2 v4l2_compat_ioctl32 uhci_hcd psmouse auth_rpcgss ohci1394 cfg80211 ehci_hcd video ieee1394 snd_pcm serio_raw battery ac nvidia(P) usbcore output sunrpc evdev lirc_ene0100 snd_page_alloc rfkill tg3 libphy fuse lzo lzo_decompress lzo_compress <6>[ 7290.414486] Pid: 0, comm: swapper Tainted: P 2.6.32-rc8-wl #213 Aspire 5720 <6>[ 7290.414507] RIP: 0010:[<ffffffffa0dd53a1>] [<ffffffffa0dd53a1>] iwl3945_rx_reply_tx+0xc1/0x450 [iwl3945] <6>[ 7290.414541] RSP: 0018:ffff880002203d60 EFLAGS: 00010246 <6>[ 7290.414557] RAX: 000000000000004f RBX: ffff880064c11600 RCX: 0000000000000013 <6>[ 7290.414576] RDX: ffffffffa0ddcf20 RSI: ffff8800512b7008 RDI: 0000000000000038 <6>[ 7290.414596] RBP: ffff880002203dd0 R08: 0000000000000000 R09: 0000000000000100 <6>[ 7290.414616] R10: 0000000000000001 R11: 0000000000000000 R12: 00000000000000a0 <6>[ 7290.414635] R13: 0000000000000002 R14: 0000000000000013 R15: 0000000000020201 <6>[ 7290.414655] FS: 0000000000000000(0000) GS:ffff880002200000(0000) knlGS:0000000000000000 <6>[ 7290.414677] CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b <6>[ 7290.414693] CR2: 0000000000000041 CR3: 0000000001001000 CR4: 00000000000006f0 <6>[ 7290.414712] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 <6>[ 7290.414732] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 <4>[ 7290.414752] Process swapper (pid: 0, threadinfo ffffffff81524000, task ffffffff81528b60) <0>[ 7290.414772] Stack: <4>[ 7290.414780] ffff880002203da0 0000000000000046 0000000000000000 0000000000000046 <4>[ 7290.414804] <0> 0000000000000282 0000000000000282 0000000000000282 ffff880064c12010 <4>[ 7290.414830] <0> ffff880002203db0 ffff880064c11600 ffff880064c12e50 ffff8800512b7000 <0>[ 7290.414858] Call Trace: <0>[ 7290.414867] <IRQ> <4>[ 7290.414884] [<ffffffffa0dc8c47>] iwl3945_irq_tasklet+0x657/0x1740 [iwl3945] <4>[ 7290.414910] [<ffffffff8138fc60>] ? _spin_unlock+0x30/0x60 <4>[ 7290.414931] [<ffffffff81049a21>] tasklet_action+0x101/0x110 <4>[ 7290.414950] [<ffffffff8104a3d0>] __do_softirq+0xc0/0x160 <4>[ 7290.414968] [<ffffffff8100d01c>] call_softirq+0x1c/0x30 <4>[ 7290.414986] [<ffffffff8100eff5>] do_softirq+0x75/0xb0 <4>[ 7290.415003] [<ffffffff81049ee5>] irq_exit+0x95/0xa0 <4>[ 7290.415020] [<ffffffff8100e547>] do_IRQ+0x77/0xf0 <4>[ 7290.415038] [<ffffffff8100c7d3>] ret_from_intr+0x0/0xf <0>[ 7290.415052] <EOI> <4>[ 7290.415067] [<ffffffff81234efa>] ? acpi_idle_enter_bm+0x270/0x2a5 <4>[ 7290.415087] [<ffffffff81234f04>] ? acpi_idle_enter_bm+0x27a/0x2a5 <4>[ 7290.415107] [<ffffffff81234efa>] ? acpi_idle_enter_bm+0x270/0x2a5 <4>[ 7290.415130] [<ffffffff812c11f3>] ? cpuidle_idle_call+0x93/0xf0 <4>[ 7290.415149] [<ffffffff8100b0d7>] ? cpu_idle+0xa7/0x110 <4>[ 7290.415168] [<ffffffff8137b3d5>] ? rest_init+0x75/0x80 <4>[ 7290.415187] [<ffffffff8158cd0a>] ? start_kernel+0x3a7/0x3b3 <4>[ 7290.415206] [<ffffffff8158c315>] ? x86_64_start_reservations+0x125/0x129 <4>[ 7290.415227] [<ffffffff8158c3fd>] ? x86_64_start_kernel+0xe4/0xeb <0>[ 7290.415243] Code: 00 41 39 ce 0f 8d e8 01 00 00 48 8b 47 40 48 63 d2 48 69 d2 98 00 00 00 4c 8b 04 02 48 c7 c2 20 cf dd a0 49 8d 78 38 49 8d 40 4f <c6> 47 09 00 c6 47 0c 00 c6 47 0f 00 c6 47 12 00 c6 47 15 00 49 <1>[ 7290.415382] RIP [<ffffffffa0dd53a1>] iwl3945_rx_reply_tx+0xc1/0x450 [iwl3945] <4>[ 7290.415410] RSP <ffff880002203d60> <0>[ 7290.415421] CR2: 0000000000000041 <4>[ 7290.415436] ---[ end trace ec46807277caa515 ]--- <0>[ 7290.415450] Kernel panic - not syncing: Fatal exception in interrupt <4>[ 7290.415468] Pid: 0, comm: swapper Tainted: P D 2.6.32-rc8-wl #213 <4>[ 7290.415486] Call Trace: <4>[ 7290.415495] <IRQ> [<ffffffff8138c040>] panic+0x7d/0x13a <4>[ 7290.415519] [<ffffffff8101071a>] oops_end+0xda/0xe0 <4>[ 7290.415538] [<ffffffff8102e1ea>] no_context+0xea/0x250 <4>[ 7290.415557] [<ffffffff81038991>] ? select_task_rq_fair+0x511/0x780 <4>[ 7290.415578] [<ffffffff8102e475>] __bad_area_nosemaphore+0x125/0x1e0 <4>[ 7290.415597] [<ffffffff81038d0c>] ? __enqueue_entity+0x7c/0x80 <4>[ 7290.415616] [<ffffffff81039201>] ? enqueue_task_fair+0x111/0x150 <4>[ 7290.415636] [<ffffffff8102e53e>] bad_area_nosemaphore+0xe/0x10 <4>[ 7290.415656] [<ffffffff8102e8fa>] do_page_fault+0x26a/0x320 <4>[ 7290.415674] [<ffffffff813905df>] page_fault+0x1f/0x30 <4>[ 7290.415697] [<ffffffffa0dd53a1>] ? iwl3945_rx_reply_tx+0xc1/0x450 [iwl3945] <4>[ 7290.415723] [<ffffffffa0dc8c47>] iwl3945_irq_tasklet+0x657/0x1740 [iwl3945] <4>[ 7290.415746] [<ffffffff8138fc60>] ? _spin_unlock+0x30/0x60 <4>[ 7290.415764] [<ffffffff81049a21>] tasklet_action+0x101/0x110 <4>[ 7290.415783] [<ffffffff8104a3d0>] __do_softirq+0xc0/0x160 <4>[ 7290.415801] [<ffffffff8100d01c>] call_softirq+0x1c/0x30 <4>[ 7290.415818] [<ffffffff8100eff5>] do_softirq+0x75/0xb0 <4>[ 7290.415835] [<ffffffff81049ee5>] irq_exit+0x95/0xa0 <4>[ 7290.415852] [<ffffffff8100e547>] do_IRQ+0x77/0xf0 <4>[ 7290.415869] [<ffffffff8100c7d3>] ret_from_intr+0x0/0xf <4>[ 7290.415883] <EOI> [<ffffffff81234efa>] ? acpi_idle_enter_bm+0x270/0x2a5 <4>[ 7290.415911] [<ffffffff81234f04>] ? acpi_idle_enter_bm+0x27a/0x2a5 <4>[ 7290.415931] [<ffffffff81234efa>] ? acpi_idle_enter_bm+0x270/0x2a5 <4>[ 7290.415952] [<ffffffff812c11f3>] ? cpuidle_idle_call+0x93/0xf0 <4>[ 7290.415971] [<ffffffff8100b0d7>] ? cpu_idle+0xa7/0x110 <4>[ 7290.415989] [<ffffffff8137b3d5>] ? rest_init+0x75/0x80 <4>[ 7290.416007] [<ffffffff8158cd0a>] ? start_kernel+0x3a7/0x3b3 <4>[ 7290.416026] [<ffffffff8158c315>] ? x86_64_start_reservations+0x125/0x129 <4>[ 7290.416047] [<ffffffff8158c3fd>] ? x86_64_start_kernel+0xe4/0xeb Reported-by: Maxim Levitsky <maximlevitsky@gmail.com> Tested-by: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> CC: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-08mac80211: fix endian errorJohannes Berg1-2/+2
I forgot to convert the radiotap length to CPU endian, which sparse found thankfully. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-08mac80211: add missing sanity checks for action framesFelix Fietkau2-1/+7
Various missing sanity checks caused rejected action frames to be interpreted as channel switch announcements, which can cause a client mode interface to switch away from its operating channel, thereby losing connectivity. This patch ensures that only spectrum management action frames are processed by the CSA handling function and prevents rejected action frames from getting processed by the MLME code. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-08mac80211: fix queue selection for packets injected via monitor interfaceLennert Buytenhek1-0/+1
Commit 'mac80211: fix skb buffering issue' added an ->ndo_select_queue() for monitor interfaces which can end up dereferencing ieee802_1d_to_ac[] beyond the end of the array for injected data packets (as skb->priority isn't guaranteed to be zero or within [0:7]), which then triggers the WARN_ON in net/core/dev.c:dev_cap_txqueue(). Fix this by always setting the priority to zero on injected data frames. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-06Revert "mac80211: replace netif_tx_{start,stop,wake}_all_queues"John W. Linville3-9/+9
This reverts commit 53623f1a09c7a7d23b74f0f7d93dba0ebde1006b. This was inadvertantly missed in "mac80211: fix skb buffering issue", and is required with that patch to restore proper queue operation. Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-06mac80211: fix-up build breakage in 2.6.33John W. Linville1-1/+1
"mac80211: fix skb buffering issue" is based on what will become 2.6.34, so it includes an incompatible usage of sta_info_get. This patch will need to be effectively reverted when merging for 2.6.34. Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-05rt2x00: Properly request tx headroom for alignment operations.Gertjan van Wingerde2-1/+17
Current rt2x00 drivers may result in a "ieee80211_tx_status: headroom too small" error message when a frame needs to be properly aligned before transmitting it. This is because the space needed to ensure proper alignment isn't requested from mac80211. Fix this by adding sufficient amount of alignment space to the amount of headroom requested for TX frames. Reported-by: David Ellingsworth <david@identd.dyndns.org> Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <ivdoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-05mac80211: fix skb buffering issueJohannes Berg6-32/+132
Since I removed the master netdev, we've been keeping internal queues only, and even before that we never told the networking stack above the virtual interfaces about congestion. This means that packets are queued in mac80211 and the upper layers never know, possibly leading to memory exhaustion and other problems. This patch makes all interfaces multiqueue and uses ndo_select_queue to put the packets into queues per AC. Additionally, when the driver stops a queue, we now stop all corresponding queues for the virtual interfaces as well. The injection case will use VO by default for non-data frames, and BE for data frames, but downgrade any data frames according to ACM. It needs to be fleshed out in the future to allow chosing the queue/AC in radiotap. Reported-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Cc: stable@kernel.org [2.6.32] Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-05rt2x00: Fix LED configuration setting for rt2800.Gertjan van Wingerde1-1/+1
rt2800_blink_set uses an illegal value to set the LED_CFG_G_LED_MODE field of the LED_CFG register. This field is only 2 bits large, so should be initialized with value that fits. Use default value from the vendor driver. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-05rt2x00: use correct headroom for transmissionPavel Roskin1-3/+3
Use rt2x00dev->ops->extra_tx_headroom, not rt2x00dev->hw->extra_tx_headroom in the tx code, as the later may include other headroom not to be used in the chipset driver. Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-04cfg80211: fix syntax error on user regulatory hintsLuis R. Rodriguez1-1/+1
This fixes a syntax error when setting up the user regulatory hint. This change yields the same exact binary object though so it ends up just being a syntax typo fix, fortunately. Cc: stable@kernel.org Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-04ath5k: Fix eeprom checksum check for custom sized eepromsLuis R. Rodriguez2-3/+37
Commit 8bf3d79bc401ca417ccf9fc076d3295d1a71dbf5 enabled EEPROM checksum checks to avoid bogus bug reports but failed to address updating the code to consider devices with custom EEPROM sizes. Devices with custom sized EEPROMs have the upper limit size stuffed in the EEPROM. Use this as the upper limit instead of the static default size. In case of a checksum error also provide back the max size and whether or not this was the default size or a custom one. If the EEPROM is busted we add a failsafe check to ensure we don't loop forever or try to read bogus areas of hardware. This closes bug 14874 http://bugzilla.kernel.org/show_bug.cgi?id=14874 Cc: stable@kernel.org Cc: David Quan <david.quan@atheros.com> Cc: Stephen Beahm <stephenbeahm@comcast.net> Reported-by: Joshua Covington <joshuacov@googlemail.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-04zd1211rw: Fix multicast filtering.Benoit Papillault1-6/+7
If multicast parameter (as returned by zd_op_prepare_multicast) has changed, no bit in changed_flags is set. To handle this situation, we do not return if changed_flags is 0. If we do so, we will have some issue with IPv6 which uses multicast for link layer address resolution. Signed-off-by: Benoit Papillault <benoit.papillault@free.fr> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-04iwl: off by one bugDan Carpenter1-1/+1
tid is used as an array offset. agg = &priv->stations[sta_id].tid[tid].agg; iwl4965_tx_status_reply_tx(priv, agg, tx_resp, txq_id, index); It should be limitted to MAX_TID_COUNT - 1; struct iwl_tid_data tid[MAX_TID_COUNT]; regards, dan carpenter Signed-off-by: Dan Carpenter <error27@gmail.com> CC: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-04mwl8k: fix configure_filter() memory leak on errorLennert Buytenhek1-1/+3
If there was an error acquiring the firmware lock in mwl8k_configure_filter(), we would end up leaking the multicast command packet prepared by mwl8k_prepare_multicast(). Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-04ath9k: fix ito64Ming Lei1-3/+3
The unit of sizeof() is byte instead of bit, so fix it. The patch can fix debug output of some dma_addr_t variables. Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-04ath9k: Fix Kconfig depends for ATH9K_DEBUGFSDominik Geyer1-1/+1
Add missing DEBUG_FS dependency for ATH9K_DEBUGFS in ath9k's Kconfig. Signed-off-by: Dominik D. Geyer <dominik.geyer@gmx.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-29Revert "b43: Enforce DMA descriptor memory constraints"John W. Linville2-158/+46
This reverts commit 9bd568a50c446433038dec2a5186c5c57c3dbd23. That commit is shown to cause allocation failures during initialization on some machines. http://bugzilla.kernel.org/show_bug.cgi?id=14844 Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28iwmc3200wifi: fix array out-of-boundary accessZhu Yi1-1/+1
Allocate priv->rx_packets[IWM_RX_ID_HASH + 1] because the max array index is IWM_RX_ID_HASH according to IWM_RX_ID_GET_HASH(). Cc: stable@kernel.org Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28wl1251: timeout one too soon in wl1251_boot_run_firmware()Roel Kluin1-1/+1
`loop' reaches INIT_LOOP + 1 after the loop. so if ACX_INTR_INIT_COMPLETE occurs in the last iteration the write occurs but also the error out as if a timeout occurred. This is probably very unlikely to ever occur. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Acked-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28mac80211: fix propagation of failed hardware reconfigurationsLuis R. Rodriguez1-0/+12
mac80211 does not propagate failed hardware reconfiguration requests. For suspend and resume this is important due to all the possible issues that can come out of the suspend <-> resume cycle. Not propagating the error means cfg80211 will assume the resume for the device went through fine and mac80211 will continue on trying to poke at the hardware, enable timers, queue work, and so on for a device which is completley unfunctional. The least we can do is to propagate device start issues and warn when this occurs upon resume. A side effect of this patch is we also now propagate the start errors upon harware reconfigurations (non-suspend), but this should also be desirable anyway, there is not point in continuing to reconfigure a device if mac80211 was unable to start the device. For further details refer to the thread: http://marc.info/?t=126151038700001&r=1&w=2 Cc: stable@kernel.org Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28mac80211: fix race with suspend and dynamic_ps_disable_workLuis R. Rodriguez1-0/+4
When mac80211 suspends it calls a driver's suspend callback as a last step and after that the driver assumes no calls will be made to it until we resume and its start callback is kicked. If such calls are made, however, suspend can end up throwing hardware in an unexpected state and making the device unusable upon resume. Fix this by preventing mac80211 to schedule dynamic_ps_disable_work by checking for when mac80211 starts to suspend and starts quiescing. Frames should be allowed to go through though as that is part of the quiescing steps and we do not flush the mac80211 workqueue since it was already done towards the beginning of suspend cycle. The other mac80211 issue will be hanled in the next patch. For further details see refer to the thread: http://marc.info/?t=126144866100001&r=1&w=2 Cc: stable@kernel.org Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28ath9k: fix missed error codes in the tx status checkFelix Fietkau2-1/+4
My previous change added in: commit 815833e7ecf0b9a017315cae6aef4d7cd9517681 ath9k: fix tx status reporting was not checking all possible tx error conditions. This could possibly lead to throughput issues due to slow rate control adaption or missed retransmissions of failed A-MPDU frames. This patch adds a mask for all possible error conditions and uses it in the xmit ok check. Cc: stable@kernel.org Reported-by: Björn Smedman <bjorn.smedman@venatech.se> Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28ath9k: wake hardware during AMPDU TX actionsLuis R. Rodriguez1-0/+6
AMDPDU actions poke hardware for TX operation, as such we want to turn hardware on for these actions. AMDPU RX operations do not require hardware on as nothing is done in hardware for those actions. Without this we cannot guarantee hardware has been programmed correctly for each AMPDU TX action. Cc: stable@kernel.org Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28ath9k: wake hardware for interface IBSS/AP/Mesh removalLuis R. Rodriguez1-0/+2
When we remove a IBSS/AP/Mesh interface we stop DMA but to do this we should ensure hardware is on. Awaken the device prior to these calls. This should ensure DMA is stopped upon suspend and plain device removal. Cc: stable@kernel.org Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-06 23:06:42 +0000