summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2010-10-12x86: Embedd irq_2_iommu into irq_cfgThomas Gleixner3-7/+11
That interrupt remapping code is x86 specific and tied to the io_apic code. No need for separate allocator functions in the interrupt remapping code. This allows to simplify the code and irq_2_iommu is small (13 bytes on 64bit) so it's not a real problem even if interrupt remapping is runtime disabled. If it's compile time disabled the impact is zero. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ingo Molnar <mingo@elte.hu> Acked-by: Suresh Siddha <suresh.b.siddha@intel.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-10-12pci: intr_remap: Remove unused functionsThomas Gleixner2-49/+0
No users. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ingo Molnar <mingo@elte.hu> Acked-by: Suresh Siddha <suresh.b.siddha@intel.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-10-12pci: intr_remap: Use irq_dataThomas Gleixner1-31/+8
No need to dereference irq_desc. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ingo Molnar <mingo@elte.hu> Acked-by: Suresh Siddha <suresh.b.siddha@intel.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-10-12pci: intr-remap: Free irte memory if SPARSE_IRQ=yThomas Gleixner1-0/+14
With SPARSE_IRQ=y the irte descriptors are dynamically allocated, but not freed in free_irte(). That was ok as long as the sparse irq core was not freeing irq descriptors on destroy_irq(). Now we leak the irte descriptor. Free it in free_irte(). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ingo Molnar <mingo@elte.hu> Acked-by: Suresh Siddha <suresh.b.siddha@intel.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-10-12x86: io_apic: Remove the now unused sparse_irq arch_* functionsThomas Gleixner1-120/+0
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ingo Molnar <mingo@elte.hu>
2010-10-12x86: ioapic: Cleanup sparse irq codeThomas Gleixner2-60/+48
Switch over to the new allocator and remove all the magic which was caused by the unability to destroy irq descriptors. Get rid of the create_irq_nr() loop for sparse and non sparse irq. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ingo Molnar <mingo@elte.hu>
2010-10-12x86: Don't setup ioapic irq for sci twiceYinghai Lu1-4/+4
The sparseirq rework triggered a warning in the iommu code, which was caused by setting up ioapic for ACPI irq 9 twice. This function is solely to handle interrupts which are on a secondary ioapic and outside the legacy irq range. Replace the sparse irq_to_desc check with a non ifdeffed version. [ tglx: Moved it before the ioapic sparse conversion and simplified the inverse logic ] Signed-off-by: Yinghai Lu <yinghai@kernel.org> LKML-Reference: <4CB00122.3030301@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ingo Molnar <mingo@elte.hu>
2010-10-12x86: io_apic: Prepare alloc/free_irq_cfg()Thomas Gleixner1-9/+9
Rename the grossly misnamed get_one_free_irq_cfg() to alloc_irq_cfg(). Add a (not yet used) irq number argument to free_irq_cfg() Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ingo Molnar <mingo@elte.hu>
2010-10-12x86: Implement new allocator functionsThomas Gleixner1-7/+47
Implement new allocator functions which make use of the core changes. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ingo Molnar <mingo@elte.hu>
2010-10-12x86: ioapic: Cleanup get_one_free_irq_cfg()Thomas Gleixner1-12/+11
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ingo Molnar <mingo@elte.hu>
2010-10-12x86: ioapic: Cleanup some moreThomas Gleixner1-12/+8
Cleanup after the irq_chip conversion a bit. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ingo Molnar <mingo@elte.hu>
2010-10-12x86: Convert ht set_affinity to new chip functionThomas Gleixner1-14/+11
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ingo Molnar <mingo@elte.hu> Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-10-12x86: Cleanup hpet affinity settingThomas Gleixner1-2/+1
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ingo Molnar <mingo@elte.hu>
2010-10-12x86: Convert dmar affinity setting to new chip functionThomas Gleixner1-13/+12
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ingo Molnar <mingo@elte.hu> Cc: David Woodhouse <dwmw2@infradead.org>
2010-10-12x86: Convert remapped msi to new chip.irq_set_affinity functionThomas Gleixner1-17/+17
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ingo Molnar <mingo@elte.hu> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-10-12x86: Convert remapped ioapic affinity setting to new irq chip functionThomas Gleixner1-38/+20
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ingo Molnar <mingo@elte.hu> Cc: Suresh Siddha <suresh.b.siddha@intel.com>
2010-10-12x86: Convert msi affinity setting to new chip functionsThomas Gleixner1-14/+12
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ingo Molnar <mingo@elte.hu> Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-10-12x86: Prepare the affinity common functions for taking struct irq_data *Thomas Gleixner3-52/+33
While at it rename it to sensible function names and fix the return value from unsigned to int for __ioapic_set_affinity (set_desc_affinity). Returning -1 in a function returning unsigned int is somewhat strange. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ingo Molnar <mingo@elte.hu>
2010-10-12x86: ioapic: Clean up the direct access to irq_descThomas Gleixner1-51/+28
Most of it is useless pseudo optimization. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ingo Molnar <mingo@elte.hu>
2010-10-12ht: Convert to new irq_chip functionsThomas Gleixner3-18/+13
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ingo Molnar <mingo@elte.hu> Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-10-12dmar: Convert to new irq chip functionsThomas Gleixner4-10/+11
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ingo Molnar <mingo@elte.hu> Acked-by: David Woodhouse <dwmw2@infradead.org>
2010-10-12x86: ioapic/hpet: Convert to new chip functionsThomas Gleixner3-30/+26
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ingo Molnar <mingo@elte.hu>
2010-10-12x86: ioapic: Convert mask to new irq_chip functionThomas Gleixner1-52/+43
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ingo Molnar <mingo@elte.hu>
2010-10-12x86: io_apic: Convert startup to new irq_chip functionThomas Gleixner1-7/+5
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ingo Molnar <mingo@elte.hu>
2010-10-12x86: Cleanup io_apicThomas Gleixner1-67/+42
Sanitize functions. Remove irq_desc pointer magic. Preparatory patch for further cleanups. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ingo Molnar <mingo@elte.hu>
2010-10-12x86: Cleanup access to irq_dataThomas Gleixner2-32/+33
Fixup the open coded access to irq_desc->[handler_data|chip_data|msi-desc] Use the macros and inline functions for it. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ingo Molnar <mingo@elte.hu>
2010-10-12x86: i8259: Convert to new irq_chip functionsThomas Gleixner5-44/+47
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ingo Molnar <mingo@elte.hu>
2010-10-12x86: Cleanup visws interrupt handlingThomas Gleixner1-96/+44
Remove the open coded access to irq_desc and convert to the new irq chip functions. Change the mask function of piix4_virtual_irq_type so we can use the generic irq handling function for the virtual interrupt instead of open coding it. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ingo Molnar <mingo@elte.hu>
2010-10-12x86: lguest: Convert to new irq chip functionsThomas Gleixner1-7/+7
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ingo Molnar <mingo@elte.hu> Cc: Rusty Russell <rusty@rustcorp.com.au>
2010-10-12x86: Sanitize apb timer interrupt handlingThomas Gleixner1-30/+24
Disable the interrupt in CPU_DEAD where it belongs. Remove the open coded irq_desc manipulation. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ingo Molnar <mingo@elte.hu> Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
2010-10-12x86: Convert irq_chip access to new functionsThomas Gleixner1-11/+13
Before moving the irq chips to the new functions, fixup direct callers. The cpu offline irq fixup code needs to become generic and archs need to honour the "force" flag as an indicator, but that's for later. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ingo Molnar <mingo@elte.hu>
2010-10-12x86: Remove useless reinitialization of irq descriptorsThomas Gleixner1-13/+4
The descriptors are already initialized in exactly this way. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ingo Molnar <mingo@elte.hu>
2010-10-12pci: Cleanup the irq_desc mess in msiThomas Gleixner3-21/+15
Handing down irq_desc to msi just so that msi can access irq_desc.irq_data.msi_desc is a pretty stupid idea. The calling code can hand down a pointer to msi_desc so msi code does not need to know about the irq descriptor at all. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ingo Molnar <mingo@elte.hu> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-10-12pci: Convert msi to new irq_chip functionsThomas Gleixner12-51/+52
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ingo Molnar <mingo@elte.hu> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Tony Luck <tony.luck@intel.com> Cc: Russell King <linux@arm.linux.org.uk>
2010-10-12Merge branch 'x86/urgent' of into irq/sparseirqThomas Gleixner249-1095/+2048
Reason: Pull in the latest io_apic bugfixes Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-10-12Merge branch 'x86/cleanups' into irq/sparseirqThomas Gleixner16-27/+21
Reason: Avoid conflicts with removal of boot_cpu_id Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-10-12Merge branch 'x86/x2apic' into irq/sparseirqThomas Gleixner5-28/+34
Reason: Avoid conflicts with the x2apic modifications Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-10-12genirq: Query arch for number of early descriptorsThomas Gleixner6-12/+16
sparse irq sets up NR_IRQS_LEGACY irq descriptors and archs then go ahead and allocate more. Use the unused return value of arch_probe_nr_irqs() to let the architecture return the number of early allocations. Fix up all users. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ingo Molnar <mingo@elte.hu>
2010-10-12genirq: Use sane sparse allocatorThomas Gleixner1-109/+20
Make irq_to_desc_alloc_node() a wrapper around the new allocator. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ingo Molnar <mingo@elte.hu>
2010-10-12genirq-update-kerneldoc.patchThomas Gleixner1-32/+52
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ingo Molnar <mingo@elte.hu>
2010-10-12genirq: Implement irq reservationThomas Gleixner2-0/+27
Mark a range of interrupts as allocated. In the SPARSE_IRQ=n case we need this to update the bitmap for the legacy irqs so the enumerator via irq_get_next_irq() works. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-10-12genirq: Implement sane enumerationThomas Gleixner2-0/+16
Use the allocator bitmap to lookup active interrupts. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ingo Molnar <mingo@elte.hu>
2010-10-12genirq: Prepare proc for real sparse irq supportThomas Gleixner3-0/+22
/proc/irq never removes any entries, but when irq descriptors can be freed for real this is necessary. Otherwise we'd reference a freed descriptor in /proc/irq/N Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ingo Molnar <mingo@elte.hu>
2010-10-12genirq: Implement a sane sparse_irq allocatorThomas Gleixner2-8/+246
The current sparse_irq allocator has several short comings due to failures in the design or the lack of it: - Requires iteration over the number of active irqs to find a free slot (Some architectures have grown their own workarounds for this) - Removal of entries is not possible - Racy between create_irq_nr and destroy_irq (plugged by horrible callbacks) - Migration of active irq descriptors is not possible - No bulk allocation of irq ranges - Sprinkeled irq_desc references all over the place outside of kernel/irq/ (The previous chip functions series is addressing this issue) Implement a sane allocator which fixes the above short comings (though migration of active descriptors needs a full tree wide cleanup of the direct and mostly unlocked access to irq_desc). The new allocator still uses a radix_tree, but uses a bitmap for keeping track of allocated irq numbers. That allows: - Fast lookup of a free slot - Allows the removal of descriptors - Prevents the create/destroy race - Bulk allocation of consecutive irq ranges - Basic design is ready for migration of life descriptors after further cleanups The bitmap is also used in the SPARSE_IRQ=n case for lookup and raceless (de)allocation of irq numbers. So it removes the requirement for looping through the descriptor array to find slots. Right now it uses sparse_irq_lock to protect the bitmap and the radix tree, but after cleaning up all users we should be able convert that to a mutex and to switch the radix_tree and decriptor allocations to GFP_KERNEL. [ Folded in a bugfix from Yinghai Lu ] Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ingo Molnar <mingo@elte.hu>
2010-10-12genirq: Provide default irq init flagsThomas Gleixner3-4/+10
Arch code sets it's own irq_desc.status flags right after boot and for dynamically allocated interrupts. That might involve iterating over a huge array. Allow ARCH_IRQ_INIT_FLAGS to set separate flags aside of IRQ_DISABLED which is the default. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ingo Molnar <mingo@elte.hu>
2010-10-12genirq: Remove export of kstat_irqs_cpuThomas Gleixner1-1/+0
The statistics accessor is only used by proc/stats and show_interrupts(). Both are compiled in. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ingo Molnar <mingo@elte.hu>
2010-10-12isdn: hisax: Replace the bogus access to irq statsThomas Gleixner2-4/+15
Abusing irq stats in a driver for counting interrupts is a horrible idea and not safe with shared interrupts. Replace it by a local interrupt counter. Noticed by the attempt to remove the irq stats export. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ingo Molnar <mingo@elte.hu>
2010-10-12genirq: Remove early_init_irq_lock_class()Thomas Gleixner3-19/+1
early_init_irq_lock_class() is called way before anything touches the irq descriptors. In case of SPARSE_IRQ=y this is a NOP operation because the radix tree is empty at this point. For the SPARSE_IRQ=n case it's sufficient to set the lock class in early_init_irq(). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ingo Molnar <mingo@elte.hu>
2010-10-12genirq: Distangle kernel/irq/handle.cThomas Gleixner4-332/+340
kernel/irq/handle.c has become a dumpground for random code in random order. Split out the irq descriptor management and the dummy irq_chip implementation into separate files. Cleanup the include maze while at it. No code change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ingo Molnar <mingo@elte.hu>
2010-10-12genirq: Sanitize irq_data accessorsThomas Gleixner2-4/+66
Get the data structure from the core and provide inline wrappers to access the irq_data members. Provide accessor inlines for irq_data as well. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ingo Molnar <mingo@elte.hu>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-11 18:08:09 +0000