summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2015-11-20ARM: tizen/tizen_odroid_defconfig: diable legacy ptyssubmit/tizen_ivi/20160217.000004submit/tizen_ivi/20160217.000000submit/tizen_common/20160218.142243submit/tizen/20160128.165357accepted/tizen/wearable/20160129.002649accepted/tizen/tv/20160129.002527accepted/tizen/mobile/20160129.002448accepted/tizen/ivi/20160218.024337accepted/tizen_wearableaccepted/tizen_tvaccepted/tizen_mobileaccepted/tizen_iviŁukasz Stelmach1-2/+1
Change-Id: I1933d214d12472a8de67cc1a849d1a8db2d13380 Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com>
2015-06-10ARM: tizen/tizen_odroid_defconfig: enable extcon-usbotg configtizen_3.0.m2.a1_tv_releasetizen_3.0.m2.a1_mobile_releasetizen_3.0.m1_tv_releasetizen_3.0.m1_mobile_releasesubmit/tizen_3.0.2015.q2_common/20150615.075539submit/tizen/20150612.034839accepted/tizen/wearable/20150612.073354accepted/tizen/tv/20150612.073348accepted/tizen/mobile/20150612.073335accepted/tizen/common/20150612.071749accepted/tizen/3.0.2015.q2/common/20150615.160028tizen_3.0.m1_tvtizen_3.0.m1_mobiletizen_3.0.2015.q2_commonaccepted/tizen_commonaccepted/tizen_3.0.2015.q2_commonSeung-Woo Kim2-1/+11
This patch enables extcon-usbotg config to support reporting usb state with extcon and setting peripheral and otg mode. To support extcon-usbotg of odroid targets including one binary image and odroid image, both defconfigs are changed. Change-Id: I613696d6e926f1beea43c689821e7f53990728d5 Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
2015-06-10ARM: dts: add odroid-usbotg extcon support for odroid platformRobert Baldyga3-0/+60
This patch adds odroid-usbotg extcon support for Odroid-X/X2/U3 boards. Change-Id: I8fd165ece62e839dc53ad3c248a40da0c4bec993 Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com> Signed-off-by: Robert Baldyga <r.baldyga@samsung.com> Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
2015-06-10extcon: add extcon-odroid-usbotg driverRobert Baldyga3-0/+269
This patch adds extcon driver for Odroid U3, U3+, X and XU3 boards. It recognizes type of USB cable connected to Odroid board basing on two signal lines VBUS_DET and OTG_ID (the second one is present only on Odroid U3+ board). Following table of states presents relationship between this signals and detected cable type: state | VBUS_DET | OTG_ID ------------------------------- USB | H | H USB-HOST | H | L disconn. | L | H USB-HOST | L | L This driver is based on extcon-gpio driver. Change-Id: I58d99a5681f99d79556123d4700d54dc836ee571 Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com> Signed-off-by: Robert Baldyga <r.baldyga@samsung.com>
2015-06-10Revert "WIP: extcon: do not update cable state if notifier cannot handle it"Robert Baldyga1-7/+1
This reverts commit da1c928ee89c224a8ab26e77514149f5f286cb3d. Reverted commit introduces change which can cause cable state change loss, and breaks extcon drivers when there are no one notifier registered - state in sysfs does not change so debugging is impeded. Change-Id: I7b3919494023aeff0ae95301976d15d738fee65b Signed-off-by: Robert Baldyga <r.baldyga@samsung.com>
2015-06-10arm: tizen_odroid_defconfig: enable fusesubmit/tizen/20150610.113501accepted/tizen/wearable/20150611.004610accepted/tizen/tv/20150611.004531accepted/tizen/mobile/20150611.004515accepted/tizen/common/20150610.144532Seung-Woo Kim1-1/+2
This patch enables fuse config to support user file system. Change-Id: I6928b6808f1b47e244cd1de7793466575e7de550 Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
2015-06-03s5p-mfc: fix state check from encoder queue_setupSeung-Woo Kim1-4/+5
MFCINST_GOT_INST state is set to encoder context with set_format only for catpure buffer. In queue_setup of encoder called during reqbufs, it is checked MFCINST_GOT_INST state for both capture and output buffer. So this patch fixes to encoder to check MFCINST_GOT_INST state only for capture buffer from queue_setup. Change-Id: I58f449eb48f990a2dcd4ecc06bc775293d1b6396 Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
2015-05-12Smack: ignore private inode for smack_file_receivesubmit/tizen/20150512.061658accepted/tizen/wearable/20150513.005517accepted/tizen/tv/20150513.005305accepted/tizen/mobile/20150513.005633accepted/tizen/common/20150512.125138Seung-Woo Kim1-0/+3
The dmabuf fd can be shared between processes via unix domain socket. The file of dmabuf fd is came from anon_inode. The inode has no set and get xattr operations, so it can not be shared between processes with smack. This patch fixes just to ignore private inode including anon_inode for smack_file_receive. Change-Id: I2dca19baed08d1061e637160f653a86419a7ba6d Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Acked-by: Casey Schaufler <casey@schaufler-ca.com>
2015-04-16arm: tizen_odroid_defconfig: enable uinput configsubmit/tizen/20150421.063448accepted/tizen/wearable/20150421.095720accepted/tizen/tv/20150421.095508accepted/tizen/mobile/20150421.095959accepted/tizen/common/20150421.084654Seung-Woo Kim1-1/+21
This patch enables uinput config to support userland input driver. Change-Id: I6937ba3db8b3d9f26f289b45f33f8abb80d053d1 Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
2015-04-16arm: tizen_defconfig: enable uinput configSeung-Woo Kim1-1/+21
This patch enables uinput config to support userland input driver. Change-Id: I69ad7db654d94e882fcc911eef8b8c5d94ef7e36 Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
2015-04-13ARM: dts: exynos4412-trats2: set display clock correctlysubmit/tizen/20150415.044325accepted/tizen/wearable/20150415.132211accepted/tizen/tv/20150415.131701accepted/tizen/mobile/20150415.132824accepted/tizen/common/20150416.090458Inki Dae1-1/+1
This patch sets display clock correctly. If Display clock isn't set correctly then you would find below messages and Display controller doesn't work correctly since a patch[1] exynos-drm: No connectors reported connected with modes [drm] Cannot find any crtc or sizes - going 1024x768 [1] commit abc0b1447d49 ("drm: Perform basic sanity checks on probed modes") Change-Id: I603afb80a27e4ca7cb8c8bb38b968c82309e1559 Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-03-30arm: tizen_defconfig: enable Odroid X2/U3 support with single kernel imageMarek Szyprowski1-24/+36
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Change-Id: I92a8db74b9bcfcd55ae8d005f91ed52c844cf833
2015-03-24ARM: dts: exynos4412-trats2: Add 32khz clock property in sound node to ↵Inha Song1-2/+4
control codec_clk32k This patch add 32khz clock property in sound node to control codec_clk32k. Change-Id: Id6c2fdb13433e2c431f530aa48445913c30f6609 Signed-off-by: Inha Song <ideal.song@samsung.com>
2015-03-24ASoC: samsung: Add 32khz clock control logic for codec mclk2Inha Song1-1/+18
This patch add 32khz clock control logic for codec's master clock 2(MCLK2). WM1811 codec can use MCLK1 and MCLK2 as FLL's source clocks. Change-Id: Ifc57ae1772db9a905b0d1c101442ccf649d53c6b Signed-off-by: Inha Song <ideal.song@samsung.com>
2015-03-17rinato: Enable CONFIG_DEVPTS_MULTIPLE_INSTANCESsubmit/tizen/20150318.083505accepted/tizen/wearable/20150319.013242accepted/tizen/tv/20150319.020218accepted/tizen/mobile/20150319.013810accepted/tizen/common/20150318.153518Maciej Wereski1-1/+1
This is required by systemd. Other configurations has this already enabled. Related: https://git.tizen.org/cgit/platform/upstream/systemd.git/commit/?h=upstream&id=b52a4a3b05a2a0d69868d57fd54f6e4b8fa0e7ca Change-Id: Ib8e4744c4cea1e0b6fe86ecb9e09cfa49be683be Signed-off-by: Maciej Wereski <m.wereski@partner.samsung.com>
2015-03-06arm: tizen_rinato_defconfig: enable mali r4p0submit/tizen/20150306.102923accepted/tizen/wearable/20150307.082045accepted/tizen/tv/20150307.081616accepted/tizen/mobile/20150310.065840accepted/tizen/common/20150306.164623Joonyoung Shim1-4/+8
Use mali r4p0 instead of r3p2. Change-Id: Ie777bf67c1887df0ca5180a42ac6c6a5d0753bd6 Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
2015-03-06arm: tizen_defconfig: enable mali r4p0Joonyoung Shim1-4/+8
Use mali r4p0 instead of r3p2. Change-Id: I911044ee55e7830f56e93eeeb56adfc1fcfe2b0e Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
2015-03-06arm: tizen_odroid_defconfig: enable mali r4p0Joonyoung Shim1-3/+7
Use mali r4p0 instead of r3p2. Change-Id: I9a40493ea1d1dce95576c8d0f17af0a34fa13f28 Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
2015-03-04drm/exynos: gsc: always use hw buffer 0 until queue management get fixedMarek Szyprowski1-12/+12
Buffer sequence selection is broken and must be fixed. For the time being always queue buffers for hw id 0, because hardware always operates on the first src and dst buffer. This fixes IOMMU faults and makes the driver usable from userspace. Suggested-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Change-Id: I46f43a5ad8b714a78bad7383bc5e532bf5015ecd
2015-02-26drm/exynos/ipp: Validate buffer enqueue requestsBeata Michalska1-1/+38
As for now there is no validation of incoming buffer enqueue request as far as the gem buffers are being concerned. This might lead to some undesired cases when the driver tries to operate on invalid buffers (wiht no valid gem object handle i.e.). Add some basic checks to rule out those potential issues. Change-Id: I117b5c566169d33fd46646068f835f48b333da73 Signed-off-by: Beata Michalska <b.michalska@samsung.com>
2015-02-26ARM: tizen_odroid_defconfig: enable audit optionssubmit/tizen/20150226.040417accepted/tizen/wearable/20150226.095643accepted/tizen/tv/20150226.094420accepted/tizen/mobile/20150226.100351accepted/tizen/common/20150226.085027Seung-Woo Kim1-1/+4
This patch enables audit options to print log for security smack from tizen_odroid_defconfig. Change-Id: I5b6d034accdffce08c6320424960a1576ad03bca Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
2015-02-16V4L: s5c73m3: Use internal firmware by defaultSylwester Nawrocki1-1/+1
Set the boot_from_rom module parameter by default to 1 so the internal sensors's firmware from ROM is used. The external firmware will be loaded only if the module parameter is explicitly set to 0 by the user. This prevents camera stream on failures for some S5C73M3 revisions. Change-Id: I8c8c936c982df0db6f570e33b55596cce11b0b16 Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
2015-02-12[media] exynos4-is: Fix fimc-lite bayer formatsArun Kumar K1-2/+2
The 10-bit and 12-bit Bayer output formats supported by FIMC-LITE actually use 16 bits where the extra bits are padded with zeros. The patch corrects buffer allocation for these two formats by modifying the depth field. This prevents memory corruption by the output DMA due to insufficient buffer size. Signed-off-by: Arun Kumar K <arun.kk@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com> Cc: stable@vger.kernel.org Change-Id: Id0e3f13ce13de51218aa0b99f86311fcf411e4ec
2015-02-12[media] exynos5-is: Reset CMU-ISPBeata Michalska1-0/+10
Reset CMU-ISP prior to entering low-power mode. Change-Id: I2caf9ecbee728f07480ee8b18ff1d5558db77bad Signed-off-by: Beata Michalska <b.michalska@samsung.com>
2015-02-11drm/exynos: debugfs: add debugfs interface and gem_info nodesubmit/tizen/20150212.024415accepted/tizen/wearable/20150213.030440accepted/tizen/tv/20150213.025935accepted/tizen/mobile/20150213.030609accepted/tizen/common/20150212.145007YoungJun Cho5-0/+133
The memps requires gem_info with gem_names to analyze graphics(video) shared memory, so adds gem_info node with debugfs interface. Change-Id: Ia923aa53c1508174e874d36001f53b0c42daac21 Signed-off-by: YoungJun Cho <yj44.cho@samsung.com>
2015-02-12drm: use common drm_gem_dmabuf_release in i915/exynos driversDaniel Vetter4-35/+5
Note that this is slightly tricky since both drivers store their native objects in dma_buf->priv. But both also embed the base drm_gem_object at the first position, so the implicit cast is ok. To use the release helper we need to export it, too. Change-Id: I37e9ffec79c90304d444ae9b6c47346f125feb49 Cc: Inki Dae <inki.dae@samsung.com> Cc: Intel Graphics Development <intel-gfx@lists.freedesktop.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com> [This patch is necessary for commit 7f663e197afa drm/prime: proper locking+refcounting for obj->dma_buf link] Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
2015-02-04packaging: fix kernel-devel requiressubmit/tizen/20150205.100354submit/tizen/20150204.122125accepted/tizen/wearable/20150206.012149accepted/tizen/tv/20150206.011611accepted/tizen/mobile/20150207.035820accepted/tizen/common/20150205.164821tizen_3.0.2015.q1_commontizen_3.0.2014.q4_commonChanho Park1-1/+1
"%{variant}-linux-kernel" is provided instead of "linux-kernel". Change-Id: Iad93b6e0fb53a5ead25842cd1de800b5af1b630b Signed-off-by: Chanho Park <chanho61.park@samsung.com>
2015-02-02exynos/drm: g2d: return 0 instead of ret in g2d_map_cmdlist_gemsubmit/tizen/20150202.023401accepted/tizen/wearable/20150202.095817accepted/tizen/tv/20150202.095715accepted/tizen/mobile/20150202.100101accepted/tizen/common/20150202.085553Chanho Park1-1/+1
This patch fixes a return value of g2d_map_cmdlist_gem. Since applied dmabuf_sync, the return value was changed to ret when success return. This is wrong value when everything is successful. Change-Id: I0ddb735b8f894ec065ee90865d0a8b45bf892b8e Reported-by: Voloshynov Sergii <s.voloshynov@samsung.com> Signed-off-by: Voloshynov Sergii <s.voloshynov@samsung.com> Signed-off-by: Chanho Park <chanho61.park@samsung.com>
2015-01-29mmc: dw_mmc: exynos: Revert the sdr_timing assignmentYuvaraj Kumar C D1-1/+2
e6c784eded7b3 ("mmc: dw_mmc: exynos: move the exynos private init") was wrongly assigning ddr_timing value to sdr_timing. This patch fixes this by reverting the sdr_timing assignment statement to the earlier location. Change-Id: I00d74956f2ce166063446b388b92c166d8b524dc Signed-off-by: Yuvaraj Kumar C D <yuvaraj.cd@samsung.com> Acked-by: Seungwon Jeon <tgih.jun@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2015-01-14Workaround for building using perl 5.20.0submit/tizen_wearable/20150127.000000submit/tizen_wearable/20150116.000000submit/tizen_tv/20150120.000002submit/tizen_tv/20150120.000001submit/tizen_tv/20150120.000000submit/tizen_tv/20150119.000001submit/tizen_tv/20150119.000000submit/tizen_tv/20150116.000000submit/tizen_mobile/20150123.000000submit/tizen_mobile/20150116.000003submit/tizen_mobile/20150116.000001submit/tizen_common/20150114.084218accepted/tizen/wearable/20150128.040556accepted/tizen/tv/20150122.091216accepted/tizen/mobile/20150126.012145accepted/tizen/common/20150114.162108Stephane Desneux1-1/+1
Change-Id: Iff1664f694da27ba209bf7c3febf2f3662c8b5cc Signed-off-by: Stephane Desneux <stephane.desneux@open.eurogiciel.org>
2015-01-05Revert "ARM: exynos: add support secondary core bootup in big.LITTLE processor."Chanho Park3-26/+15
This reverts commit c25aae8a02c0e3132df581d1d12be1d6738a08d6. I think we need to investigate this patch more and more. Change-Id: Idb69b33334f53ddd414123f6e9ac432840b99857 Signed-off-by: Chanho Park <chanho61.park@samsung.com>
2015-01-04security: smack: fix out-of-bounds access in smk_parse_smack()Andrey Ryabinin1-4/+3
Setting smack label on file (e.g. 'attr -S -s SMACK64 -V "test" test') triggered following spew on the kernel with KASan applied: ================================================================== BUG: AddressSanitizer: out of bounds access in strncpy+0x28/0x60 at addr ffff8800059ad064 ============================================================================= BUG kmalloc-8 (Not tainted): kasan error ----------------------------------------------------------------------------- Disabling lock debugging due to kernel taint INFO: Slab 0xffffea0000166b40 objects=128 used=7 fp=0xffff8800059ad080 flags=0x4000000000000080 INFO: Object 0xffff8800059ad060 @offset=96 fp=0xffff8800059ad080 Bytes b4 ffff8800059ad050: a0 df 9a 05 00 88 ff ff 5a 5a 5a 5a 5a 5a 5a 5a ........ZZZZZZZZ Object ffff8800059ad060: 74 65 73 74 6b 6b 6b a5 testkkk. Redzone ffff8800059ad068: cc cc cc cc cc cc cc cc ........ Padding ffff8800059ad078: 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZ CPU: 0 PID: 528 Comm: attr Tainted: G B 3.18.0-rc1-mm1+ #5 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 0000000000000000 ffff8800059ad064 ffffffff81534cf2 ffff880005a5bc40 ffffffff8112fe1a 0000000100800006 0000000f059ad060 ffff880006000f90 0000000000000296 ffffea0000166b40 ffffffff8107ca97 ffff880005891060 Call Trace: ? dump_stack (lib/dump_stack.c:52) ? kasan_report_error (mm/kasan/report.c:102 mm/kasan/report.c:178) ? preempt_count_sub (kernel/sched/core.c:2651) ? __asan_load1 (mm/kasan/kasan.h:50 mm/kasan/kasan.c:248 mm/kasan/kasan.c:358) ? strncpy (lib/string.c:121) ? strncpy (lib/string.c:121) ? smk_parse_smack (security/smack/smack_access.c:457) ? setxattr (fs/xattr.c:343) ? smk_import_entry (security/smack/smack_access.c:514) ? smack_inode_setxattr (security/smack/smack_lsm.c:1093 (discriminator 1)) ? security_inode_setxattr (security/security.c:602) ? vfs_setxattr (fs/xattr.c:134) ? setxattr (fs/xattr.c:343) ? setxattr (fs/xattr.c:360) ? get_parent_ip (kernel/sched/core.c:2606) ? preempt_count_sub (kernel/sched/core.c:2651) ? __percpu_counter_add (arch/x86/include/asm/preempt.h:98 lib/percpu_counter.c:90) ? get_parent_ip (kernel/sched/core.c:2606) ? preempt_count_sub (kernel/sched/core.c:2651) ? __mnt_want_write (arch/x86/include/asm/preempt.h:98 fs/namespace.c:359) ? path_setxattr (fs/xattr.c:380) ? SyS_lsetxattr (fs/xattr.c:397) ? system_call_fastpath (arch/x86/kernel/entry_64.S:423) Read of size 1 by task attr: Memory state around the buggy address: ffff8800059ace80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff8800059acf00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff8800059acf80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >ffff8800059ad000: 00 fc fc fc 00 fc fc fc 05 fc fc fc 04 fc fc fc ^ ffff8800059ad080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8800059ad100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8800059ad180: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ================================================================== strncpy() copies one byte more than the source string has. Fix this by passing the correct length to strncpy(). Now we can remove initialization of the last byte in 'smack' string because kzalloc() already did this for us. Signed-off-by: Andrey Ryabinin <a.ryabinin@samsung.com> Change-Id: I7bb84eed3c348711312434d98d6cc13cbe8f5d76 Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
2015-01-04lib/idr.c: fix out-of-bounds pointer dereferenceAndrey Ryabinin1-11/+14
I'm working on address sanitizer project for kernel. Recently we started experiments with stack instrumentation, to detect out-of-bounds read/write bugs on stack. Just after booting I've hit out-of-bounds read on stack in idr_for_each (and in __idr_remove_all as well): struct idr_layer **paa = &pa[0]; while (id >= 0 && id <= max) { ... while (n < fls(id)) { n += IDR_BITS; p = *--paa; <--- here we are reading pa[-1] value. } } Despite the fact that after this dereference we are exiting out of loop and never use p, such behaviour is undefined and should be avoided. Fix this by moving pointer derference to the beggining of the loop, right before we will use it. Signed-off-by: Andrey Ryabinin <a.ryabinin@samsung.com> Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Tejun Heo <tj@kernel.org> Cc: Alexey Preobrazhensky <preobr@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Change-Id: Id151fc7e874e3cff64da43eb3359f022de7e6cae Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
2015-01-04drm: delete unconsumed pending event list in drm_events_releaseYoungJun Cho1-1/+3
When there are unconsumed pending events, the events are destroyed by calling destroy callback, but the events list are remained, because there is no list_del(). It is possible that the page flip request is handled after drm_events_release() is called and before drm_fb_release(). In this case a drm_pending_event is remained not freed. So exynos driver checks again to remove it in its post close routine. But the file_priv->event_list contains undeleted ones, this can make oops for accessing invalid memory. Signed-off-by: YoungJun Cho <yj44.cho@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Change-Id: I25a471f4f4929150542eb6273c7673b9f44936b6 [back-ported from mainline to fix use after free issue] Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
2014-12-29cgroup: replace task_cgroup_path_from_hierarchy() with task_cgroup_path()Tejun Heo2-14/+20
task_cgroup_path_from_hierarchy() was added for the planned new users and none of the currently planned users wants to know about multiple hierarchies. This patch drops the multiple hierarchy part and makes it always return the path in the first non-dummy hierarchy. As unified hierarchy will always have id 1, this is guaranteed to return the path for the unified hierarchy if mounted; otherwise, it will return the path from the hierarchy which happens to occupy the lowest hierarchy id, which will usually be the first hierarchy mounted after boot. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Li Zefan <lizefan@huawei.com> Cc: Lennart Poettering <lennart@poettering.net> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: Jan Kaluža <jkaluza@redhat.com> Change-Id: Iaa199f7332f01a03f791def776b5403f6fa459b3 Origin: https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=913ffdb54366f94eec65c656cae8c6e00e1ab1b0 Backported-by: Maciej Wereski <m.wereski@partner.samsung.com> Signed-off-by: Maciej Wereski <m.wereski@partner.samsung.com>
2014-12-29cgroup: implement task_cgroup_path_from_hierarchy()Tejun Heo2-0/+34
kdbus folks want a sane way to determine the cgroup path that a given task belongs to on a given hierarchy, which is a reasonble thing to expect from cgroup core. Implement task_cgroup_path_from_hierarchy(). v2: Dropped unnecessary NULL check on the return value of task_cgroup_from_root() as suggested by Li Zefan. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Greg Kroah-Hartman <greg@kroah.com> Acked-by: Li Zefan <lizefan@huawei.com> Cc: Kay Sievers <kay@vrfy.org> Cc: Lennart Poettering <lennart@poettering.net> Cc: Daniel Mack <daniel@zonque.org> Change-Id: Ifd630e09163b8272627c2ef8be1866c5e9dc05f9 Origin: https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=857a2beb09ab83e9a8185821ae16db7dfbe8b837 Backported-by: Maciej Wereski <m.wereski@partner.samsung.com> Signed-off-by: Maciej Wereski <m.wereski@partner.samsung.com>
2014-12-29cgroup: make hierarchy_id use cyclic idrTejun Heo1-20/+8
We want to be able to lookup a hierarchy from its id and cyclic allocation is a whole lot simpler with idr. Convert to idr and use idr_alloc_cyclc(). Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Li Zefan <lizefan@huawei.com> Change-Id: Ibd20ebe71ddb452178302cf86a22572b18cd82df Origin: https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=1a574231669f8c3065c83974e9557fcbbd94b8a6 Backported-by: Maciej Wereski <m.wereski@partner.samsung.com> Signed-off-by: Maciej Wereski <m.wereski@partner.samsung.com>
2014-12-29cgroup: drop hierarchy_id_lockTejun Heo1-6/+17
Now that hierarchy_id alloc / free are protected by the cgroup mutexes, there's no need for this separate lock. Drop it. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Li Zefan <lizefan@huawei.com> Change-Id: I03fbc8bba08a785c6082a9b5bb1087c53c506c60 Origin: https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=54e7b4eb15fc4354d5ada5469e3db4a220ddb3ed Backported-by: Maciej Wereski <m.wereski@partner.samsung.com> Signed-off-by: Maciej Wereski <m.wereski@partner.samsung.com>
2014-12-29cgroup: refactor hierarchy_id handlingTejun Heo1-21/+35
We're planning to converting hierarchy_ida to an idr and use it to look up hierarchy from its id. As we want the mapping to happen atomically with cgroupfs_root registration, this patch refactors hierarchy_id init / exit so that ida operations happen inside cgroup_[root_]mutex. * s/init_root_id()/cgroup_init_root_id()/ and make it return 0 or -errno like a normal function. * Move hierarchy_id initialization from cgroup_root_from_opts() into cgroup_mount() block where the root is confirmed to be used and being registered while holding both mutexes. * Split cgroup_drop_id() into cgroup_exit_root_id() and cgroup_free_root(), so that ID release can happen before dropping the mutexes in cgroup_kill_sb(). The latter expects hierarchy_id to be exited before being invoked. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Li Zefan <lizefan@huawei.com> Change-Id: Ie1433632bcde96c359fd1d488a81cc3255ee92e6 Origin: https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=fa3ca07e96185aa1496b405472399a2a2a336a17 Backported-by: Maciej Wereski <m.wereski@partner.samsung.com> Signed-off-by: Maciej Wereski <m.wereski@partner.samsung.com>
2014-12-29smack: introduce a special case for tmpfs in smack_d_instantiate()Łukasz Stelmach1-2/+14
Files created with __shmem_file_stup() appear to have somewhat fake dentries which make them look like root directories and not get the label the current process or ("*") star meant for tmpfs files. Change-Id: If0e2e3ceddeff55d5121e76e85dbea60414b786a Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com>
2014-12-29selftests/memfd: Run test on all architecturesPranith Kumar1-21/+0
Remove the dependence on x86 to run the memfd test. Verfied on 32-bit powerpc. Signed-off-by: Pranith Kumar <bobby.prani@gmail.com> Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com> Change-Id: I4e3a0d311842f5d0327abdb6bb8ce3ba1460f902 Origin: https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=ce6a144a0d01c6628496e4c0d18fbf3a0362cc67 Backported-by: Maciej Wereski <m.wereski@partner.samsung.com> Signed-off-by: Maciej Wereski <m.wereski@partner.samsung.com>
2014-12-29shm: add memfd.h to UAPI export listDavid Drysdale1-0/+1
The new header file memfd.h from commit 9183df25fe7b ("shm: add memfd_create() syscall") should be exported. Signed-off-by: David Drysdale <drysdale@google.com> Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Change-Id: Ibcd915aad320ddedcfcca0b7a098e03cc883fd88 Origin: https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=b01d072065b6f36550f486fe77f05b092225ba1b Backported-by: Maciej Wereski <m.wereski@partner.samsung.com> Signed-off-by: Maciej Wereski <m.wereski@partner.samsung.com>
2014-12-29memfd_test: Add missing argument to printf()Pranith Kumar1-1/+1
Add a missing path argument buf to printf() Signed-off-by: Pranith Kumar <bobby.prani@gmail.com> Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com> Change-Id: Ie4d1f23fc07a397971ee94c0fdd164fb7145771d Origin: https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=2ed36928373cc3dfb20a4d17042e9a6e05538e41 Backported-by: Maciej Wereski <m.wereski@partner.samsung.com> Signed-off-by: Maciej Wereski <m.wereski@partner.samsung.com>
2014-12-29memfd_test: Make it work on 32-bit systemsPranith Kumar1-18/+16
This test currently fails on 32-bit systems since we use u64 type to pass the flags to fcntl. This commit changes this to use 'unsigned int' type for flags to fcntl making it work on 32-bit systems. Signed-off-by: Pranith Kumar <bobby.prani@gmail.com> Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com> Change-Id: I80190741a7cfaf9517cf220a58bcc36177139993 Origin: https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=57e67900d4c7949ad646a5f43a8ca5180170d2a0 Backported-by: Maciej Wereski <m.wereski@partner.samsung.com> Signed-off-by: Maciej Wereski <m.wereski@partner.samsung.com>
2014-12-29asm-generic: add memfd_create system call to unistd.hWill Deacon1-1/+8
Commit 9183df25fe7b ("shm: add memfd_create() syscall") added a new system call (memfd_create) but didn't update the asm-generic unistd header. This patch adds the new system call to the asm-generic version of unistd.h so that it can be used by architectures such as arm64. Cc: Arnd Bergmann <arnd@arndb.de> Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Change-Id: I7fff684716a86ad9f10e19755480c32ce9eeb861 Origin: https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=503e6636b6f96056210062be703356f4253b6db9 Backported-by: Maciej Wereski <m.wereski@partner.samsung.com> Signed-off-by: Maciej Wereski <m.wereski@partner.samsung.com>
2014-12-29arm64: compat: wire up memfd_create and getrandom syscalls for aarch32Will Deacon1-1/+8
arch/arm/ just grew support for the new memfd_create and getrandom syscalls, so add them to our compat layer too. Signed-off-by: Will Deacon <will.deacon@arm.com> Origin: https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=a97a42c47608d0bb6f2dfc2e162cc84a27beb43a Backported-by: Maciej Wereski <m.wereski@partner.samsung.com> getrandom isn't wired. Change-Id: I0bfb09e924d839ede0f998a73a4b9a395359a1b6 Signed-off-by: Maciej Wereski <m.wereski@partner.samsung.com>
2014-12-29ARM: wire up memfd_create syscallRussell King3-1/+8
Add the memfd_create syscall to ARM. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Origin: https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=e57e41931134e09fc6c03c8d4eb19d516cc6e59b Backported-by: Maciej Wereski <m.wereski@partner.samsung.com> Adjusted __NR_syscalls as in commit eb6452537b280652eee66801ec97cc369e27e5d8. Signed-off-by: Maciej Wereski <m.wereski@partner.samsung.com> Change-Id: I8bcbec0d5fb6241cbb5c13f142552dbfe5307c9e
2014-12-29shm: wait for pins to be released when sealingDavid Herrmann1-1/+109
If we set SEAL_WRITE on a file, we must make sure there cannot be any ongoing write-operations on the file. For write() calls, we simply lock the inode mutex, for mmap() we simply verify there're no writable mappings. However, there might be pages pinned by AIO, Direct-IO and similar operations via GUP. We must make sure those do not write to the memfd file after we set SEAL_WRITE. As there is no way to notify GUP users to drop pages or to wait for them to be done, we implement the wait ourself: When setting SEAL_WRITE, we check all pages for their ref-count. If it's bigger than 1, we know there's some user of the page. We then mark the page and wait for up to 150ms for those ref-counts to be dropped. If the ref-counts are not dropped in time, we refuse the seal operation. Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Ryan Lortie <desrt@desrt.ca> Cc: Lennart Poettering <lennart@poettering.net> Cc: Daniel Mack <zonque@gmail.com> Cc: Andy Lutomirski <luto@amacapital.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Change-Id: I952289df3c4261be68ab4dc590890fe20b0906a4 Origin: https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=05f65b5c70909ef686f865f0a85406d74d75f70f Backported-by: Maciej Wereski <m.wereski@partner.samsung.com> Signed-off-by: Maciej Wereski <m.wereski@partner.samsung.com>
2014-12-29selftests: add memfd/sealing page-pinning testsDavid Herrmann5-1/+450
Setting SEAL_WRITE is not possible if there're pending GUP users. This commit adds selftests for memfd+sealing that use FUSE to create pending page-references. FUSE is very helpful here in that it allows us to delay direct-IO operations for an arbitrary amount of time. This way, we can force the kernel to pin pages and then run our normal selftests. Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Ryan Lortie <desrt@desrt.ca> Cc: Lennart Poettering <lennart@poettering.net> Cc: Daniel Mack <zonque@gmail.com> Cc: Andy Lutomirski <luto@amacapital.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Change-Id: Ideaf47a24b3522183cbe5ae10c320f7d38e31931 Origin: https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=87b2d44026e0e315a7401551e95b189ac4b28217 Backported-by: Maciej Wereski <m.wereski@partner.samsung.com> Signed-off-by: Maciej Wereski <m.wereski@partner.samsung.com>
2014-12-29selftests: add memfd_create() + sealing testsDavid Herrmann4-0/+945
Some basic tests to verify sealing on memfds works as expected and guarantees the advertised semantics. Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Ryan Lortie <desrt@desrt.ca> Cc: Lennart Poettering <lennart@poettering.net> Cc: Daniel Mack <zonque@gmail.com> Cc: Andy Lutomirski <luto@amacapital.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Change-Id: I9a6bfd2205aa868f327fdb04788a1f6bae23eb17 Origin: https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=4f5ce5e8d7e2da3c714df8a7fa42edb9f992fc52 Backported-by: Maciej Wereski <m.wereski@partner.samsung.com> Signed-off-by: Maciej Wereski <m.wereski@partner.samsung.com>