| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Change-Id: I1933d214d12472a8de67cc1a849d1a8db2d13380
Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com>
|
|
This patch enables extcon-usbotg config to support reporting usb
state with extcon and setting peripheral and otg mode. To support
extcon-usbotg of odroid targets including one binary image and
odroid image, both defconfigs are changed.
Change-Id: I613696d6e926f1beea43c689821e7f53990728d5
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
|
|
This patch adds odroid-usbotg extcon support for Odroid-X/X2/U3
boards.
Change-Id: I8fd165ece62e839dc53ad3c248a40da0c4bec993
Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com>
Signed-off-by: Robert Baldyga <r.baldyga@samsung.com>
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
|
|
This patch adds extcon driver for Odroid U3, U3+, X and XU3 boards.
It recognizes type of USB cable connected to Odroid board basing on
two signal lines VBUS_DET and OTG_ID (the second one is present only
on Odroid U3+ board).
Following table of states presents relationship between this signals
and detected cable type:
state | VBUS_DET | OTG_ID
-------------------------------
USB | H | H
USB-HOST | H | L
disconn. | L | H
USB-HOST | L | L
This driver is based on extcon-gpio driver.
Change-Id: I58d99a5681f99d79556123d4700d54dc836ee571
Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com>
Signed-off-by: Robert Baldyga <r.baldyga@samsung.com>
|
|
This reverts commit da1c928ee89c224a8ab26e77514149f5f286cb3d.
Reverted commit introduces change which can cause cable state change
loss, and breaks extcon drivers when there are no one notifier
registered - state in sysfs does not change so debugging is impeded.
Change-Id: I7b3919494023aeff0ae95301976d15d738fee65b
Signed-off-by: Robert Baldyga <r.baldyga@samsung.com>
|
|
This patch enables fuse config to support user file system.
Change-Id: I6928b6808f1b47e244cd1de7793466575e7de550
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
|
|
MFCINST_GOT_INST state is set to encoder context with set_format
only for catpure buffer. In queue_setup of encoder called during
reqbufs, it is checked MFCINST_GOT_INST state for both capture
and output buffer. So this patch fixes to encoder to check
MFCINST_GOT_INST state only for capture buffer from queue_setup.
Change-Id: I58f449eb48f990a2dcd4ecc06bc775293d1b6396
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
|
|
The dmabuf fd can be shared between processes via unix domain
socket. The file of dmabuf fd is came from anon_inode. The inode
has no set and get xattr operations, so it can not be shared
between processes with smack. This patch fixes just to ignore
private inode including anon_inode for smack_file_receive.
Change-Id: I2dca19baed08d1061e637160f653a86419a7ba6d
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
|
|
This patch enables uinput config to support userland input driver.
Change-Id: I6937ba3db8b3d9f26f289b45f33f8abb80d053d1
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
|
|
This patch enables uinput config to support userland input driver.
Change-Id: I69ad7db654d94e882fcc911eef8b8c5d94ef7e36
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
|
|
This patch sets display clock correctly.
If Display clock isn't set correctly then you would find below messages
and Display controller doesn't work correctly since a patch[1]
exynos-drm: No connectors reported connected with modes
[drm] Cannot find any crtc or sizes - going 1024x768
[1] commit abc0b1447d49 ("drm: Perform basic sanity checks on probed modes")
Change-Id: I603afb80a27e4ca7cb8c8bb38b968c82309e1559
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Change-Id: I92a8db74b9bcfcd55ae8d005f91ed52c844cf833
|
|
control codec_clk32k
This patch add 32khz clock property in sound node to control codec_clk32k.
Change-Id: Id6c2fdb13433e2c431f530aa48445913c30f6609
Signed-off-by: Inha Song <ideal.song@samsung.com>
|
|
This patch add 32khz clock control logic for codec's master clock 2(MCLK2).
WM1811 codec can use MCLK1 and MCLK2 as FLL's source clocks.
Change-Id: Ifc57ae1772db9a905b0d1c101442ccf649d53c6b
Signed-off-by: Inha Song <ideal.song@samsung.com>
|
|
This is required by systemd. Other configurations has this already
enabled.
Related: https://git.tizen.org/cgit/platform/upstream/systemd.git/commit/?h=upstream&id=b52a4a3b05a2a0d69868d57fd54f6e4b8fa0e7ca
Change-Id: Ib8e4744c4cea1e0b6fe86ecb9e09cfa49be683be
Signed-off-by: Maciej Wereski <m.wereski@partner.samsung.com>
|
|
Use mali r4p0 instead of r3p2.
Change-Id: Ie777bf67c1887df0ca5180a42ac6c6a5d0753bd6
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
|
|
Use mali r4p0 instead of r3p2.
Change-Id: I911044ee55e7830f56e93eeeb56adfc1fcfe2b0e
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
|
|
Use mali r4p0 instead of r3p2.
Change-Id: I9a40493ea1d1dce95576c8d0f17af0a34fa13f28
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
|
|
Buffer sequence selection is broken and must be fixed. For the time being
always queue buffers for hw id 0, because hardware always operates on the
first src and dst buffer. This fixes IOMMU faults and makes the driver
usable from userspace.
Suggested-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Change-Id: I46f43a5ad8b714a78bad7383bc5e532bf5015ecd
|
|
As for now there is no validation of incoming buffer
enqueue request as far as the gem buffers are being
concerned. This might lead to some undesired cases
when the driver tries to operate on invalid buffers
(wiht no valid gem object handle i.e.).
Add some basic checks to rule out those potential issues.
Change-Id: I117b5c566169d33fd46646068f835f48b333da73
Signed-off-by: Beata Michalska <b.michalska@samsung.com>
|
|
This patch enables audit options to print log for security smack
from tizen_odroid_defconfig.
Change-Id: I5b6d034accdffce08c6320424960a1576ad03bca
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
|
|
Set the boot_from_rom module parameter by default to 1 so the internal
sensors's firmware from ROM is used. The external firmware will be
loaded only if the module parameter is explicitly set to 0 by the user.
This prevents camera stream on failures for some S5C73M3 revisions.
Change-Id: I8c8c936c982df0db6f570e33b55596cce11b0b16
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
|
|
The 10-bit and 12-bit Bayer output formats supported by FIMC-LITE
actually use 16 bits where the extra bits are padded with zeros.
The patch corrects buffer allocation for these two formats by
modifying the depth field. This prevents memory corruption by the
output DMA due to insufficient buffer size.
Signed-off-by: Arun Kumar K <arun.kk@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Cc: stable@vger.kernel.org
Change-Id: Id0e3f13ce13de51218aa0b99f86311fcf411e4ec
|
|
Reset CMU-ISP prior to entering low-power mode.
Change-Id: I2caf9ecbee728f07480ee8b18ff1d5558db77bad
Signed-off-by: Beata Michalska <b.michalska@samsung.com>
|
|
The memps requires gem_info with gem_names to analyze graphics(video)
shared memory, so adds gem_info node with debugfs interface.
Change-Id: Ia923aa53c1508174e874d36001f53b0c42daac21
Signed-off-by: YoungJun Cho <yj44.cho@samsung.com>
|
|
Note that this is slightly tricky since both drivers store their
native objects in dma_buf->priv. But both also embed the base
drm_gem_object at the first position, so the implicit cast is ok.
To use the release helper we need to export it, too.
Change-Id: I37e9ffec79c90304d444ae9b6c47346f125feb49
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Intel Graphics Development <intel-gfx@lists.freedesktop.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
[This patch is necessary for commit 7f663e197afa drm/prime: proper locking+refcounting for obj->dma_buf link]
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
|
|
"%{variant}-linux-kernel" is provided instead of "linux-kernel".
Change-Id: Iad93b6e0fb53a5ead25842cd1de800b5af1b630b
Signed-off-by: Chanho Park <chanho61.park@samsung.com>
|
|
This patch fixes a return value of g2d_map_cmdlist_gem. Since applied
dmabuf_sync, the return value was changed to ret when success return.
This is wrong value when everything is successful.
Change-Id: I0ddb735b8f894ec065ee90865d0a8b45bf892b8e
Reported-by: Voloshynov Sergii <s.voloshynov@samsung.com>
Signed-off-by: Voloshynov Sergii <s.voloshynov@samsung.com>
Signed-off-by: Chanho Park <chanho61.park@samsung.com>
|
|
e6c784eded7b3 ("mmc: dw_mmc: exynos: move the exynos private init") was
wrongly assigning ddr_timing value to sdr_timing. This patch fixes this
by reverting the sdr_timing assignment statement to the earlier location.
Change-Id: I00d74956f2ce166063446b388b92c166d8b524dc
Signed-off-by: Yuvaraj Kumar C D <yuvaraj.cd@samsung.com>
Acked-by: Seungwon Jeon <tgih.jun@samsung.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
|
|
Change-Id: Iff1664f694da27ba209bf7c3febf2f3662c8b5cc
Signed-off-by: Stephane Desneux <stephane.desneux@open.eurogiciel.org>
|
|
This reverts commit c25aae8a02c0e3132df581d1d12be1d6738a08d6.
I think we need to investigate this patch more and more.
Change-Id: Idb69b33334f53ddd414123f6e9ac432840b99857
Signed-off-by: Chanho Park <chanho61.park@samsung.com>
|
|
Setting smack label on file (e.g. 'attr -S -s SMACK64 -V "test" test')
triggered following spew on the kernel with KASan applied:
==================================================================
BUG: AddressSanitizer: out of bounds access in strncpy+0x28/0x60 at addr ffff8800059ad064
=============================================================================
BUG kmalloc-8 (Not tainted): kasan error
-----------------------------------------------------------------------------
Disabling lock debugging due to kernel taint
INFO: Slab 0xffffea0000166b40 objects=128 used=7 fp=0xffff8800059ad080 flags=0x4000000000000080
INFO: Object 0xffff8800059ad060 @offset=96 fp=0xffff8800059ad080
Bytes b4 ffff8800059ad050: a0 df 9a 05 00 88 ff ff 5a 5a 5a 5a 5a 5a 5a 5a ........ZZZZZZZZ
Object ffff8800059ad060: 74 65 73 74 6b 6b 6b a5 testkkk.
Redzone ffff8800059ad068: cc cc cc cc cc cc cc cc ........
Padding ffff8800059ad078: 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZ
CPU: 0 PID: 528 Comm: attr Tainted: G B 3.18.0-rc1-mm1+ #5
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
0000000000000000 ffff8800059ad064 ffffffff81534cf2 ffff880005a5bc40
ffffffff8112fe1a 0000000100800006 0000000f059ad060 ffff880006000f90
0000000000000296 ffffea0000166b40 ffffffff8107ca97 ffff880005891060
Call Trace:
? dump_stack (lib/dump_stack.c:52)
? kasan_report_error (mm/kasan/report.c:102 mm/kasan/report.c:178)
? preempt_count_sub (kernel/sched/core.c:2651)
? __asan_load1 (mm/kasan/kasan.h:50 mm/kasan/kasan.c:248 mm/kasan/kasan.c:358)
? strncpy (lib/string.c:121)
? strncpy (lib/string.c:121)
? smk_parse_smack (security/smack/smack_access.c:457)
? setxattr (fs/xattr.c:343)
? smk_import_entry (security/smack/smack_access.c:514)
? smack_inode_setxattr (security/smack/smack_lsm.c:1093 (discriminator 1))
? security_inode_setxattr (security/security.c:602)
? vfs_setxattr (fs/xattr.c:134)
? setxattr (fs/xattr.c:343)
? setxattr (fs/xattr.c:360)
? get_parent_ip (kernel/sched/core.c:2606)
? preempt_count_sub (kernel/sched/core.c:2651)
? __percpu_counter_add (arch/x86/include/asm/preempt.h:98 lib/percpu_counter.c:90)
? get_parent_ip (kernel/sched/core.c:2606)
? preempt_count_sub (kernel/sched/core.c:2651)
? __mnt_want_write (arch/x86/include/asm/preempt.h:98 fs/namespace.c:359)
? path_setxattr (fs/xattr.c:380)
? SyS_lsetxattr (fs/xattr.c:397)
? system_call_fastpath (arch/x86/kernel/entry_64.S:423)
Read of size 1 by task attr:
Memory state around the buggy address:
ffff8800059ace80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffff8800059acf00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffff8800059acf80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>ffff8800059ad000: 00 fc fc fc 00 fc fc fc 05 fc fc fc 04 fc fc fc
^
ffff8800059ad080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff8800059ad100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff8800059ad180: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================
strncpy() copies one byte more than the source string has.
Fix this by passing the correct length to strncpy().
Now we can remove initialization of the last byte in 'smack' string
because kzalloc() already did this for us.
Signed-off-by: Andrey Ryabinin <a.ryabinin@samsung.com>
Change-Id: I7bb84eed3c348711312434d98d6cc13cbe8f5d76
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
|
|
I'm working on address sanitizer project for kernel. Recently we
started experiments with stack instrumentation, to detect out-of-bounds
read/write bugs on stack.
Just after booting I've hit out-of-bounds read on stack in idr_for_each
(and in __idr_remove_all as well):
struct idr_layer **paa = &pa[0];
while (id >= 0 && id <= max) {
...
while (n < fls(id)) {
n += IDR_BITS;
p = *--paa; <--- here we are reading pa[-1] value.
}
}
Despite the fact that after this dereference we are exiting out of loop
and never use p, such behaviour is undefined and should be avoided.
Fix this by moving pointer derference to the beggining of the loop,
right before we will use it.
Signed-off-by: Andrey Ryabinin <a.ryabinin@samsung.com>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Alexey Preobrazhensky <preobr@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Change-Id: Id151fc7e874e3cff64da43eb3359f022de7e6cae
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
|
|
When there are unconsumed pending events, the events are
destroyed by calling destroy callback, but the events list
are remained, because there is no list_del().
It is possible that the page flip request is handled after
drm_events_release() is called and before drm_fb_release().
In this case a drm_pending_event is remained not freed.
So exynos driver checks again to remove it in its post
close routine. But the file_priv->event_list contains
undeleted ones, this can make oops for accessing invalid
memory.
Signed-off-by: YoungJun Cho <yj44.cho@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Change-Id: I25a471f4f4929150542eb6273c7673b9f44936b6
[back-ported from mainline to fix use after free issue]
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
|
|
task_cgroup_path_from_hierarchy() was added for the planned new users
and none of the currently planned users wants to know about multiple
hierarchies. This patch drops the multiple hierarchy part and makes
it always return the path in the first non-dummy hierarchy.
As unified hierarchy will always have id 1, this is guaranteed to
return the path for the unified hierarchy if mounted; otherwise, it
will return the path from the hierarchy which happens to occupy the
lowest hierarchy id, which will usually be the first hierarchy mounted
after boot.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
Cc: Lennart Poettering <lennart@poettering.net>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: Jan Kaluža <jkaluza@redhat.com>
Change-Id: Iaa199f7332f01a03f791def776b5403f6fa459b3
Origin: https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=913ffdb54366f94eec65c656cae8c6e00e1ab1b0
Backported-by: Maciej Wereski <m.wereski@partner.samsung.com>
Signed-off-by: Maciej Wereski <m.wereski@partner.samsung.com>
|
|
kdbus folks want a sane way to determine the cgroup path that a given
task belongs to on a given hierarchy, which is a reasonble thing to
expect from cgroup core.
Implement task_cgroup_path_from_hierarchy().
v2: Dropped unnecessary NULL check on the return value of
task_cgroup_from_root() as suggested by Li Zefan.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Greg Kroah-Hartman <greg@kroah.com>
Acked-by: Li Zefan <lizefan@huawei.com>
Cc: Kay Sievers <kay@vrfy.org>
Cc: Lennart Poettering <lennart@poettering.net>
Cc: Daniel Mack <daniel@zonque.org>
Change-Id: Ifd630e09163b8272627c2ef8be1866c5e9dc05f9
Origin: https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=857a2beb09ab83e9a8185821ae16db7dfbe8b837
Backported-by: Maciej Wereski <m.wereski@partner.samsung.com>
Signed-off-by: Maciej Wereski <m.wereski@partner.samsung.com>
|
|
We want to be able to lookup a hierarchy from its id and cyclic
allocation is a whole lot simpler with idr. Convert to idr and use
idr_alloc_cyclc().
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
Change-Id: Ibd20ebe71ddb452178302cf86a22572b18cd82df
Origin: https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=1a574231669f8c3065c83974e9557fcbbd94b8a6
Backported-by: Maciej Wereski <m.wereski@partner.samsung.com>
Signed-off-by: Maciej Wereski <m.wereski@partner.samsung.com>
|
|
Now that hierarchy_id alloc / free are protected by the cgroup
mutexes, there's no need for this separate lock. Drop it.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
Change-Id: I03fbc8bba08a785c6082a9b5bb1087c53c506c60
Origin: https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=54e7b4eb15fc4354d5ada5469e3db4a220ddb3ed
Backported-by: Maciej Wereski <m.wereski@partner.samsung.com>
Signed-off-by: Maciej Wereski <m.wereski@partner.samsung.com>
|
|
We're planning to converting hierarchy_ida to an idr and use it to
look up hierarchy from its id. As we want the mapping to happen
atomically with cgroupfs_root registration, this patch refactors
hierarchy_id init / exit so that ida operations happen inside
cgroup_[root_]mutex.
* s/init_root_id()/cgroup_init_root_id()/ and make it return 0 or
-errno like a normal function.
* Move hierarchy_id initialization from cgroup_root_from_opts() into
cgroup_mount() block where the root is confirmed to be used and
being registered while holding both mutexes.
* Split cgroup_drop_id() into cgroup_exit_root_id() and
cgroup_free_root(), so that ID release can happen before dropping
the mutexes in cgroup_kill_sb(). The latter expects hierarchy_id to
be exited before being invoked.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
Change-Id: Ie1433632bcde96c359fd1d488a81cc3255ee92e6
Origin: https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=fa3ca07e96185aa1496b405472399a2a2a336a17
Backported-by: Maciej Wereski <m.wereski@partner.samsung.com>
Signed-off-by: Maciej Wereski <m.wereski@partner.samsung.com>
|
|
Files created with __shmem_file_stup() appear to have somewhat fake
dentries which make them look like root directories and not get
the label the current process or ("*") star meant for tmpfs files.
Change-Id: If0e2e3ceddeff55d5121e76e85dbea60414b786a
Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com>
|
|
Remove the dependence on x86 to run the memfd test. Verfied on 32-bit powerpc.
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Change-Id: I4e3a0d311842f5d0327abdb6bb8ce3ba1460f902
Origin: https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=ce6a144a0d01c6628496e4c0d18fbf3a0362cc67
Backported-by: Maciej Wereski <m.wereski@partner.samsung.com>
Signed-off-by: Maciej Wereski <m.wereski@partner.samsung.com>
|
|
The new header file memfd.h from commit 9183df25fe7b ("shm: add
memfd_create() syscall") should be exported.
Signed-off-by: David Drysdale <drysdale@google.com>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Change-Id: Ibcd915aad320ddedcfcca0b7a098e03cc883fd88
Origin: https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=b01d072065b6f36550f486fe77f05b092225ba1b
Backported-by: Maciej Wereski <m.wereski@partner.samsung.com>
Signed-off-by: Maciej Wereski <m.wereski@partner.samsung.com>
|
|
Add a missing path argument buf to printf()
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Change-Id: Ie4d1f23fc07a397971ee94c0fdd164fb7145771d
Origin: https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=2ed36928373cc3dfb20a4d17042e9a6e05538e41
Backported-by: Maciej Wereski <m.wereski@partner.samsung.com>
Signed-off-by: Maciej Wereski <m.wereski@partner.samsung.com>
|
|
This test currently fails on 32-bit systems since we use u64 type to pass the
flags to fcntl.
This commit changes this to use 'unsigned int' type for flags to fcntl making it
work on 32-bit systems.
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Change-Id: I80190741a7cfaf9517cf220a58bcc36177139993
Origin: https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=57e67900d4c7949ad646a5f43a8ca5180170d2a0
Backported-by: Maciej Wereski <m.wereski@partner.samsung.com>
Signed-off-by: Maciej Wereski <m.wereski@partner.samsung.com>
|
|
Commit 9183df25fe7b ("shm: add memfd_create() syscall") added a new
system call (memfd_create) but didn't update the asm-generic unistd
header.
This patch adds the new system call to the asm-generic version of
unistd.h so that it can be used by architectures such as arm64.
Cc: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Change-Id: I7fff684716a86ad9f10e19755480c32ce9eeb861
Origin: https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=503e6636b6f96056210062be703356f4253b6db9
Backported-by: Maciej Wereski <m.wereski@partner.samsung.com>
Signed-off-by: Maciej Wereski <m.wereski@partner.samsung.com>
|
|
arch/arm/ just grew support for the new memfd_create and getrandom
syscalls, so add them to our compat layer too.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Origin: https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=a97a42c47608d0bb6f2dfc2e162cc84a27beb43a
Backported-by: Maciej Wereski <m.wereski@partner.samsung.com>
getrandom isn't wired.
Change-Id: I0bfb09e924d839ede0f998a73a4b9a395359a1b6
Signed-off-by: Maciej Wereski <m.wereski@partner.samsung.com>
|
|
Add the memfd_create syscall to ARM.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Origin: https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=e57e41931134e09fc6c03c8d4eb19d516cc6e59b
Backported-by: Maciej Wereski <m.wereski@partner.samsung.com>
Adjusted __NR_syscalls as in commit
eb6452537b280652eee66801ec97cc369e27e5d8.
Signed-off-by: Maciej Wereski <m.wereski@partner.samsung.com>
Change-Id: I8bcbec0d5fb6241cbb5c13f142552dbfe5307c9e
|
|
If we set SEAL_WRITE on a file, we must make sure there cannot be any
ongoing write-operations on the file. For write() calls, we simply lock
the inode mutex, for mmap() we simply verify there're no writable
mappings. However, there might be pages pinned by AIO, Direct-IO and
similar operations via GUP. We must make sure those do not write to the
memfd file after we set SEAL_WRITE.
As there is no way to notify GUP users to drop pages or to wait for them
to be done, we implement the wait ourself: When setting SEAL_WRITE, we
check all pages for their ref-count. If it's bigger than 1, we know
there's some user of the page. We then mark the page and wait for up to
150ms for those ref-counts to be dropped. If the ref-counts are not
dropped in time, we refuse the seal operation.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Acked-by: Hugh Dickins <hughd@google.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Ryan Lortie <desrt@desrt.ca>
Cc: Lennart Poettering <lennart@poettering.net>
Cc: Daniel Mack <zonque@gmail.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Change-Id: I952289df3c4261be68ab4dc590890fe20b0906a4
Origin: https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=05f65b5c70909ef686f865f0a85406d74d75f70f
Backported-by: Maciej Wereski <m.wereski@partner.samsung.com>
Signed-off-by: Maciej Wereski <m.wereski@partner.samsung.com>
|
|
Setting SEAL_WRITE is not possible if there're pending GUP users. This
commit adds selftests for memfd+sealing that use FUSE to create pending
page-references. FUSE is very helpful here in that it allows us to delay
direct-IO operations for an arbitrary amount of time. This way, we can
force the kernel to pin pages and then run our normal selftests.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Acked-by: Hugh Dickins <hughd@google.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Ryan Lortie <desrt@desrt.ca>
Cc: Lennart Poettering <lennart@poettering.net>
Cc: Daniel Mack <zonque@gmail.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Change-Id: Ideaf47a24b3522183cbe5ae10c320f7d38e31931
Origin: https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=87b2d44026e0e315a7401551e95b189ac4b28217
Backported-by: Maciej Wereski <m.wereski@partner.samsung.com>
Signed-off-by: Maciej Wereski <m.wereski@partner.samsung.com>
|
|
Some basic tests to verify sealing on memfds works as expected and
guarantees the advertised semantics.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Acked-by: Hugh Dickins <hughd@google.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Ryan Lortie <desrt@desrt.ca>
Cc: Lennart Poettering <lennart@poettering.net>
Cc: Daniel Mack <zonque@gmail.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Change-Id: I9a6bfd2205aa868f327fdb04788a1f6bae23eb17
Origin: https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=4f5ce5e8d7e2da3c714df8a7fa42edb9f992fc52
Backported-by: Maciej Wereski <m.wereski@partner.samsung.com>
Signed-off-by: Maciej Wereski <m.wereski@partner.samsung.com>
|
