diff options
Diffstat (limited to 'sound')
| -rw-r--r-- | sound/pci/emu10k1/emu10k1_main.c | 45 |
1 files changed, 36 insertions, 9 deletions
diff --git a/sound/pci/emu10k1/emu10k1_main.c b/sound/pci/emu10k1/emu10k1_main.c index 72367411ee6..6135fc99fa5 100644 --- a/sound/pci/emu10k1/emu10k1_main.c +++ b/sound/pci/emu10k1/emu10k1_main.c @@ -51,9 +51,13 @@ #define HANA_FILENAME "emu/hana.fw" #define DOCK_FILENAME "emu/audio_dock.fw" +#define EMU1010B_FILENAME "emu/emu1010b.fw" +#define MICRO_DOCK_FILENAME "emu/micro_dock.fw" MODULE_FIRMWARE(HANA_FILENAME); MODULE_FIRMWARE(DOCK_FILENAME); +MODULE_FIRMWARE(EMU1010B_FILENAME); +MODULE_FIRMWARE(MICRO_DOCK_FILENAME); /************************************************************************* @@ -660,10 +664,12 @@ static int snd_emu1010_load_firmware(struct snd_emu10k1 * emu, const char * file return err; } snd_printk(KERN_INFO "firmware size=0x%zx\n", fw_entry->size); +#if 0 if (fw_entry->size != 0x133a4) { snd_printk(KERN_ERR "firmware: %s wrong size.\n",filename); return -EINVAL; } +#endif /* The FPGA is a Xilinx Spartan IIE XC2S50E */ /* GPIO7 -> FPGA PGMN @@ -758,7 +764,7 @@ static int snd_emu10k1_emu1010_init(struct snd_emu10k1 * emu) /* ID, should read & 0x7f = 0x55. (Bit 7 is the IRQ bit) */ snd_emu1010_fpga_read(emu, EMU_HANA_ID, ® ); snd_printdd("reg1=0x%x\n",reg); - if (reg == 0x55) { + if ((reg & 0x1f) == 0x15) { /* FPGA netlist already present so clear it */ /* Return to programming mode */ @@ -766,19 +772,26 @@ static int snd_emu10k1_emu1010_init(struct snd_emu10k1 * emu) } snd_emu1010_fpga_read(emu, EMU_HANA_ID, ® ); snd_printdd("reg2=0x%x\n",reg); - if (reg == 0x55) { + if ((reg & 0x1f) == 0x15) { /* FPGA failed to return to programming mode */ return -ENODEV; } snd_printk(KERN_INFO "emu1010: EMU_HANA_ID=0x%x\n",reg); - if ((err = snd_emu1010_load_firmware(emu, HANA_FILENAME)) != 0) { - snd_printk(KERN_INFO "emu1010: Loading Hana Firmware file %s failed\n", HANA_FILENAME); - return err; + if (emu->card_capabilities->emu1010 == 1) { + if ((err = snd_emu1010_load_firmware(emu, HANA_FILENAME)) != 0) { + snd_printk(KERN_INFO "emu1010: Loading Hana Firmware file %s failed\n", HANA_FILENAME); + return err; + } + } else if (emu->card_capabilities->emu1010 == 2) { + if ((err = snd_emu1010_load_firmware(emu, EMU1010B_FILENAME)) != 0) { + snd_printk(KERN_INFO "emu1010: Loading Firmware file %s failed\n", EMU1010B_FILENAME); + return err; + } } /* ID, should read & 0x7f = 0x55 when FPGA programmed. */ snd_emu1010_fpga_read(emu, EMU_HANA_ID, ® ); - if (reg != 0x55) { + if ((reg & 0x1f) != 0x15) { /* FPGA failed to be programmed */ snd_printk(KERN_INFO "emu1010: Loading Hana Firmware file failed, reg=0x%x\n", reg); return -ENODEV; @@ -995,16 +1008,23 @@ static int snd_emu10k1_emu1010_init(struct snd_emu10k1 * emu) /* Return to Audio Dock programming mode */ snd_printk(KERN_INFO "emu1010: Loading Audio Dock Firmware\n"); snd_emu1010_fpga_write(emu, EMU_HANA_FPGA_CONFIG, EMU_HANA_FPGA_CONFIG_AUDIODOCK ); - if ((err = snd_emu1010_load_firmware(emu, DOCK_FILENAME)) != 0) { - return err; + if (emu->card_capabilities->emu1010 == 1) { + if ((err = snd_emu1010_load_firmware(emu, DOCK_FILENAME)) != 0) { + return err; + } + } else if (emu->card_capabilities->emu1010 == 2) { + if ((err = snd_emu1010_load_firmware(emu, MICRO_DOCK_FILENAME)) != 0) { + return err; + } } + snd_emu1010_fpga_write(emu, EMU_HANA_FPGA_CONFIG, 0 ); snd_emu1010_fpga_read(emu, EMU_HANA_IRQ_STATUS, ® ); snd_printk(KERN_INFO "emu1010: EMU_HANA+DOCK_IRQ_STATUS=0x%x\n",reg); /* ID, should read & 0x7f = 0x55 when FPGA programmed. */ snd_emu1010_fpga_read(emu, EMU_HANA_ID, ® ); snd_printk(KERN_INFO "emu1010: EMU_HANA+DOCK_ID=0x%x\n",reg); - if (reg != 0x55) { + if ((reg & 0x1f) != 0x15) { /* FPGA failed to be programmed */ snd_printk(KERN_INFO "emu1010: Loading Audio Dock Firmware file failed, reg=0x%x\n", reg); return 0; @@ -1282,6 +1302,13 @@ static struct snd_emu_chip_details emu_chip_details[] = { .spi_dac = 1, .i2c_adc = 1, .spk71 = 1} , + {.vendor = 0x1102, .device = 0x0008, .subsystem = 0x40041102, + .driver = "Audigy2", .name = "E-mu 1010b PCI [MAEM????]", + .id = "EMU1010", + .emu10k2_chip = 1, + .ca0108_chip = 1, + .spk71 = 1 , + .emu1010 = 2} , {.vendor = 0x1102, .device = 0x0008, .driver = "Audigy2", .name = "Audigy 2 Value [Unknown]", .id = "Audigy2", |