diff options
Diffstat (limited to 'lib/inflate.c')
| -rw-r--r-- | lib/inflate.c | 1210 |
1 files changed, 1210 insertions, 0 deletions
diff --git a/lib/inflate.c b/lib/inflate.c new file mode 100644 index 00000000000..75e7d303c72 --- /dev/null +++ b/lib/inflate.c @@ -0,0 +1,1210 @@ +#define DEBG(x) +#define DEBG1(x) +/* inflate.c -- Not copyrighted 1992 by Mark Adler + version c10p1, 10 January 1993 */ + +/* + * Adapted for booting Linux by Hannu Savolainen 1993 + * based on gzip-1.0.3 + * + * Nicolas Pitre <nico@cam.org>, 1999/04/14 : + * Little mods for all variable to reside either into rodata or bss segments + * by marking constant variables with 'const' and initializing all the others + * at run-time only. This allows for the kernel uncompressor to run + * directly from Flash or ROM memory on embedded systems. + */ + +/* + Inflate deflated (PKZIP's method 8 compressed) data. The compression + method searches for as much of the current string of bytes (up to a + length of 258) in the previous 32 K bytes. If it doesn't find any + matches (of at least length 3), it codes the next byte. Otherwise, it + codes the length of the matched string and its distance backwards from + the current position. There is a single Huffman code that codes both + single bytes (called "literals") and match lengths. A second Huffman + code codes the distance information, which follows a length code. Each + length or distance code actually represents a base value and a number + of "extra" (sometimes zero) bits to get to add to the base value. At + the end of each deflated block is a special end-of-block (EOB) literal/ + length code. The decoding process is basically: get a literal/length + code; if EOB then done; if a literal, emit the decoded byte; if a + length then get the distance and emit the referred-to bytes from the + sliding window of previously emitted data. + + There are (currently) three kinds of inflate blocks: stored, fixed, and + dynamic. The compressor deals with some chunk of data at a time, and + decides which method to use on a chunk-by-chunk basis. A chunk might + typically be 32 K or 64 K. If the chunk is incompressible, then the + "stored" method is used. In this case, the bytes are simply stored as + is, eight bits per byte, with none of the above coding. The bytes are + preceded by a count, since there is no longer an EOB code. + + If the data is compressible, then either the fixed or dynamic methods + are used. In the dynamic method, the compressed data is preceded by + an encoding of the literal/length and distance Huffman codes that are + to be used to decode this block. The representation is itself Huffman + coded, and so is preceded by a description of that code. These code + descriptions take up a little space, and so for small blocks, there is + a predefined set of codes, called the fixed codes. The fixed method is + used if the block codes up smaller that way (usually for quite small + chunks), otherwise the dynamic method is used. In the latter case, the + codes are customized to the probabilities in the current block, and so + can code it much better than the pre-determined fixed codes. + + The Huffman codes themselves are decoded using a multi-level table + lookup, in order to maximize the speed of decoding plus the speed of + building the decoding tables. See the comments below that precede the + lbits and dbits tuning parameters. + */ + + +/* + Notes beyond the 1.93a appnote.txt: + + 1. Distance pointers never point before the beginning of the output + stream. + 2. Distance pointers can point back across blocks, up to 32k away. + 3. There is an implied maximum of 7 bits for the bit length table and + 15 bits for the actual data. + 4. If only one code exists, then it is encoded using one bit. (Zero + would be more efficient, but perhaps a little confusing.) If two + codes exist, they are coded using one bit each (0 and 1). + 5. There is no way of sending zero distance codes--a dummy must be + sent if there are none. (History: a pre 2.0 version of PKZIP would + store blocks with no distance codes, but this was discovered to be + too harsh a criterion.) Valid only for 1.93a. 2.04c does allow + zero distance codes, which is sent as one code of zero bits in + length. + 6. There are up to 286 literal/length codes. Code 256 represents the + end-of-block. Note however that the static length tree defines + 288 codes just to fill out the Huffman codes. Codes 286 and 287 + cannot be used though, since there is no length base or extra bits + defined for them. Similarly, there are up to 30 distance codes. + However, static trees define 32 codes (all 5 bits) to fill out the + Huffman codes, but the last two had better not show up in the data. + 7. Unzip can check dynamic Huffman blocks for complete code sets. + The exception is that a single code would not be complete (see #4). + 8. The five bits following the block type is really the number of + literal codes sent minus 257. + 9. Length codes 8,16,16 are interpreted as 13 length codes of 8 bits + (1+6+6). Therefore, to output three times the length, you output + three codes (1+1+1), whereas to output four times the same length, + you only need two codes (1+3). Hmm. + 10. In the tree reconstruction algorithm, Code = Code + Increment + only if BitLength(i) is not zero. (Pretty obvious.) + 11. Correction: 4 Bits: # of Bit Length codes - 4 (4 - 19) + 12. Note: length code 284 can represent 227-258, but length code 285 + really is 258. The last length deserves its own, short code + since it gets used a lot in very redundant files. The length + 258 is special since 258 - 3 (the min match length) is 255. + 13. The literal/length and distance code bit lengths are read as a + single stream of lengths. It is possible (and advantageous) for + a repeat code (16, 17, or 18) to go across the boundary between + the two sets of lengths. + */ +#include <linux/compiler.h> + +#ifdef RCSID +static char rcsid[] = "#Id: inflate.c,v 0.14 1993/06/10 13:27:04 jloup Exp #"; +#endif + +#ifndef STATIC + +#if defined(STDC_HEADERS) || defined(HAVE_STDLIB_H) +# include <sys/types.h> +# include <stdlib.h> +#endif + +#include "gzip.h" +#define STATIC +#endif /* !STATIC */ + +#ifndef INIT +#define INIT +#endif + +#define slide window + +/* Huffman code lookup table entry--this entry is four bytes for machines + that have 16-bit pointers (e.g. PC's in the small or medium model). + Valid extra bits are 0..13. e == 15 is EOB (end of block), e == 16 + means that v is a literal, 16 < e < 32 means that v is a pointer to + the next table, which codes e - 16 bits, and lastly e == 99 indicates + an unused code. If a code with e == 99 is looked up, this implies an + error in the data. */ +struct huft { + uch e; /* number of extra bits or operation */ + uch b; /* number of bits in this code or subcode */ + union { + ush n; /* literal, length base, or distance base */ + struct huft *t; /* pointer to next level of table */ + } v; +}; + + +/* Function prototypes */ +STATIC int INIT huft_build OF((unsigned *, unsigned, unsigned, + const ush *, const ush *, struct huft **, int *)); +STATIC int INIT huft_free OF((struct huft *)); +STATIC int INIT inflate_codes OF((struct huft *, struct huft *, int, int)); +STATIC int INIT inflate_stored OF((void)); +STATIC int INIT inflate_fixed OF((void)); +STATIC int INIT inflate_dynamic OF((void)); +STATIC int INIT inflate_block OF((int *)); +STATIC int INIT inflate OF((void)); + + +/* The inflate algorithm uses a sliding 32 K byte window on the uncompressed + stream to find repeated byte strings. This is implemented here as a + circular buffer. The index is updated simply by incrementing and then + ANDing with 0x7fff (32K-1). */ +/* It is left to other modules to supply the 32 K area. It is assumed + to be usable as if it were declared "uch slide[32768];" or as just + "uch *slide;" and then malloc'ed in the latter case. The definition + must be in unzip.h, included above. */ +/* unsigned wp; current position in slide */ +#define wp outcnt +#define flush_output(w) (wp=(w),flush_window()) + +/* Tables for deflate from PKZIP's appnote.txt. */ +static const unsigned border[] = { /* Order of the bit length code lengths */ + 16, 17, 18, 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15}; +static const ush cplens[] = { /* Copy lengths for literal codes 257..285 */ + 3, 4, 5, 6, 7, 8, 9, 10, 11, 13, 15, 17, 19, 23, 27, 31, + 35, 43, 51, 59, 67, 83, 99, 115, 131, 163, 195, 227, 258, 0, 0}; + /* note: see note #13 above about the 258 in this list. */ +static const ush cplext[] = { /* Extra bits for literal codes 257..285 */ + 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 2, 2, 2, 2, + 3, 3, 3, 3, 4, 4, 4, 4, 5, 5, 5, 5, 0, 99, 99}; /* 99==invalid */ +static const ush cpdist[] = { /* Copy offsets for distance codes 0..29 */ + 1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49, 65, 97, 129, 193, + 257, 385, 513, 769, 1025, 1537, 2049, 3073, 4097, 6145, + 8193, 12289, 16385, 24577}; +static const ush cpdext[] = { /* Extra bits for distance codes */ + 0, 0, 0, 0, 1, 1, 2, 2, 3, 3, 4, 4, 5, 5, 6, 6, + 7, 7, 8, 8, 9, 9, 10, 10, 11, 11, + 12, 12, 13, 13}; + + + +/* Macros for inflate() bit peeking and grabbing. + The usage is: + + NEEDBITS(j) + x = b & mask_bits[j]; + DUMPBITS(j) + + where NEEDBITS makes sure that b has at least j bits in it, and + DUMPBITS removes the bits from b. The macros use the variable k + for the number of bits in b. Normally, b and k are register + variables for speed, and are initialized at the beginning of a + routine that uses these macros from a global bit buffer and count. + + If we assume that EOB will be the longest code, then we will never + ask for bits with NEEDBITS that are beyond the end of the stream. + So, NEEDBITS should not read any more bytes than are needed to + meet the request. Then no bytes need to be "returned" to the buffer + at the end of the last block. + + However, this assumption is not true for fixed blocks--the EOB code + is 7 bits, but the other literal/length codes can be 8 or 9 bits. + (The EOB code is shorter than other codes because fixed blocks are + generally short. So, while a block always has an EOB, many other + literal/length codes have a significantly lower probability of + showing up at all.) However, by making the first table have a + lookup of seven bits, the EOB code will be found in that first + lookup, and so will not require that too many bits be pulled from + the stream. + */ + +STATIC ulg bb; /* bit buffer */ +STATIC unsigned bk; /* bits in bit buffer */ + +STATIC const ush mask_bits[] = { + 0x0000, + 0x0001, 0x0003, 0x0007, 0x000f, 0x001f, 0x003f, 0x007f, 0x00ff, + 0x01ff, 0x03ff, 0x07ff, 0x0fff, 0x1fff, 0x3fff, 0x7fff, 0xffff +}; + +#define NEXTBYTE() ({ int v = get_byte(); if (v < 0) goto underrun; (uch)v; }) +#define NEEDBITS(n) {while(k<(n)){b|=((ulg)NEXTBYTE())<<k;k+=8;}} +#define DUMPBITS(n) {b>>=(n);k-=(n);} + + +/* + Huffman code decoding is performed using a multi-level table lookup. + The fastest way to decode is to simply build a lookup table whose + size is determined by the longest code. However, the time it takes + to build this table can also be a factor if the data being decoded + is not very long. The most common codes are necessarily the + shortest codes, so those codes dominate the decoding time, and hence + the speed. The idea is you can have a shorter table that decodes the + shorter, more probable codes, and then point to subsidiary tables for + the longer codes. The time it costs to decode the longer codes is + then traded against the time it takes to make longer tables. + + This results of this trade are in the variables lbits and dbits + below. lbits is the number of bits the first level table for literal/ + length codes can decode in one step, and dbits is the same thing for + the distance codes. Subsequent tables are also less than or equal to + those sizes. These values may be adjusted either when all of the + codes are shorter than that, in which case the longest code length in + bits is used, or when the shortest code is *longer* than the requested + table size, in which case the length of the shortest code in bits is + used. + + There are two different values for the two tables, since they code a + different number of possibilities each. The literal/length table + codes 286 possible values, or in a flat code, a little over eight + bits. The distance table codes 30 possible values, or a little less + than five bits, flat. The optimum values for speed end up being + about one bit more than those, so lbits is 8+1 and dbits is 5+1. + The optimum values may differ though from machine to machine, and + possibly even between compilers. Your mileage may vary. + */ + + +STATIC const int lbits = 9; /* bits in base literal/length lookup table */ +STATIC const int dbits = 6; /* bits in base distance lookup table */ + + +/* If BMAX needs to be larger than 16, then h and x[] should be ulg. */ +#define BMAX 16 /* maximum bit length of any code (16 for explode) */ +#define N_MAX 288 /* maximum number of codes in any set */ + + +STATIC unsigned hufts; /* track memory usage */ + + +STATIC int INIT huft_build( + unsigned *b, /* code lengths in bits (all assumed <= BMAX) */ + unsigned n, /* number of codes (assumed <= N_MAX) */ + unsigned s, /* number of simple-valued codes (0..s-1) */ + const ush *d, /* list of base values for non-simple codes */ + const ush *e, /* list of extra bits for non-simple codes */ + struct huft **t, /* result: starting table */ + int *m /* maximum lookup bits, returns actual */ + ) +/* Given a list of code lengths and a maximum table size, make a set of + tables to decode that set of codes. Return zero on success, one if + the given code set is incomplete (the tables are still built in this + case), two if the input is invalid (all zero length codes or an + oversubscribed set of lengths), and three if not enough memory. */ +{ + unsigned a; /* counter for codes of length k */ + unsigned c[BMAX+1]; /* bit length count table */ + unsigned f; /* i repeats in table every f entries */ + int g; /* maximum code length */ + int h; /* table level */ + register unsigned i; /* counter, current code */ + register unsigned j; /* counter */ + register int k; /* number of bits in current code */ + int l; /* bits per table (returned in m) */ + register unsigned *p; /* pointer into c[], b[], or v[] */ + register struct huft *q; /* points to current table */ + struct huft r; /* table entry for structure assignment */ + struct huft *u[BMAX]; /* table stack */ + unsigned v[N_MAX]; /* values in order of bit length */ + register int w; /* bits before this table == (l * h) */ + unsigned x[BMAX+1]; /* bit offsets, then code stack */ + unsigned *xp; /* pointer into x */ + int y; /* number of dummy codes added */ + unsigned z; /* number of entries in current table */ + +DEBG("huft1 "); + + /* Generate counts for each bit length */ + memzero(c, sizeof(c)); + p = b; i = n; + do { + Tracecv(*p, (stderr, (n-i >= ' ' && n-i <= '~' ? "%c %d\n" : "0x%x %d\n"), + n-i, *p)); + c[*p]++; /* assume all entries <= BMAX */ + p++; /* Can't combine with above line (Solaris bug) */ + } while (--i); + if (c[0] == n) /* null input--all zero length codes */ + { + *t = (struct huft *)NULL; + *m = 0; + return 0; + } + +DEBG("huft2 "); + + /* Find minimum and maximum length, bound *m by those */ + l = *m; + for (j = 1; j <= BMAX; j++) + if (c[j]) + break; + k = j; /* minimum code length */ + if ((unsigned)l < j) + l = j; + for (i = BMAX; i; i--) + if (c[i]) + break; + g = i; /* maximum code length */ + if ((unsigned)l > i) + l = i; + *m = l; + +DEBG("huft3 "); + + /* Adjust last length count to fill out codes, if needed */ + for (y = 1 << j; j < i; j++, y <<= 1) + if ((y -= c[j]) < 0) + return 2; /* bad input: more codes than bits */ + if ((y -= c[i]) < 0) + return 2; + c[i] += y; + +DEBG("huft4 "); + + /* Generate starting offsets into the value table for each length */ + x[1] = j = 0; + p = c + 1; xp = x + 2; + while (--i) { /* note that i == g from above */ + *xp++ = (j += *p++); + } + +DEBG("huft5 "); + + /* Make a table of values in order of bit lengths */ + p = b; i = 0; + do { + if ((j = *p++) != 0) + v[x[j]++] = i; + } while (++i < n); + +DEBG("h6 "); + + /* Generate the Huffman codes and for each, make the table entries */ + x[0] = i = 0; /* first Huffman code is zero */ + p = v; /* grab values in bit order */ + h = -1; /* no tables yet--level -1 */ + w = -l; /* bits decoded == (l * h) */ + u[0] = (struct huft *)NULL; /* just to keep compilers happy */ + q = (struct huft *)NULL; /* ditto */ + z = 0; /* ditto */ +DEBG("h6a "); + + /* go through the bit lengths (k already is bits in shortest code) */ + for (; k <= g; k++) + { +DEBG("h6b "); + a = c[k]; + while (a--) + { +DEBG("h6b1 "); + /* here i is the Huffman code of length k bits for value *p */ + /* make tables up to required level */ + while (k > w + l) + { +DEBG1("1 "); + h++; + w += l; /* previous table always l bits */ + + /* compute minimum size table less than or equal to l bits */ + z = (z = g - w) > (unsigned)l ? l : z; /* upper limit on table size */ + if ((f = 1 << (j = k - w)) > a + 1) /* try a k-w bit table */ + { /* too few codes for k-w bit table */ +DEBG1("2 "); + f -= a + 1; /* deduct codes from patterns left */ + xp = c + k; + while (++j < z) /* try smaller tables up to z bits */ + { + if ((f <<= 1) <= *++xp) + break; /* enough codes to use up j bits */ + f -= *xp; /* else deduct codes from patterns */ + } + } +DEBG1("3 "); + z = 1 << j; /* table entries for j-bit table */ + + /* allocate and link in new table */ + if ((q = (struct huft *)malloc((z + 1)*sizeof(struct huft))) == + (struct huft *)NULL) + { + if (h) + huft_free(u[0]); + return 3; /* not enough memory */ + } +DEBG1("4 "); + hufts += z + 1; /* track memory usage */ + *t = q + 1; /* link to list for huft_free() */ + *(t = &(q->v.t)) = (struct huft *)NULL; + u[h] = ++q; /* table starts after link */ + +DEBG1("5 "); + /* connect to last table, if there is one */ + if (h) + { + x[h] = i; /* save pattern for backing up */ + r.b = (uch)l; /* bits to dump before this table */ + r.e = (uch)(16 + j); /* bits in this table */ + r.v.t = q; /* pointer to this table */ + j = i >> (w - l); /* (get around Turbo C bug) */ + u[h-1][j] = r; /* connect to last table */ + } +DEBG1("6 "); + } +DEBG("h6c "); + + /* set up table entry in r */ + r.b = (uch)(k - w); + if (p >= v + n) + r.e = 99; /* out of values--invalid code */ + else if (*p < s) + { + r.e = (uch)(*p < 256 ? 16 : 15); /* 256 is end-of-block code */ + r.v.n = (ush)(*p); /* simple code is just the value */ + p++; /* one compiler does not like *p++ */ + } + else + { + r.e = (uch)e[*p - s]; /* non-simple--look up in lists */ + r.v.n = d[*p++ - s]; + } +DEBG("h6d "); + + /* fill code-like entries with r */ + f = 1 << (k - w); + for (j = i >> w; j < z; j += f) + q[j] = r; + + /* backwards increment the k-bit code i */ + for (j = 1 << (k - 1); i & j; j >>= 1) + i ^= j; + i ^= j; + + /* backup over finished tables */ + while ((i & ((1 << w) - 1)) != x[h]) + { + h--; /* don't need to update q */ + w -= l; + } +DEBG("h6e "); + } +DEBG("h6f "); + } + +DEBG("huft7 "); + + /* Return true (1) if we were given an incomplete table */ + return y != 0 && g != 1; +} + + + +STATIC int INIT huft_free( + struct huft *t /* table to free */ + ) +/* Free the malloc'ed tables built by huft_build(), which makes a linked + list of the tables it made, with the links in a dummy first entry of + each table. */ +{ + register struct huft *p, *q; + + + /* Go through linked list, freeing from the malloced (t[-1]) address. */ + p = t; + while (p != (struct huft *)NULL) + { + q = (--p)->v.t; + free((char*)p); + p = q; + } + return 0; +} + + +STATIC int INIT inflate_codes( + struct huft *tl, /* literal/length decoder tables */ + struct huft *td, /* distance decoder tables */ + int bl, /* number of bits decoded by tl[] */ + int bd /* number of bits decoded by td[] */ + ) +/* inflate (decompress) the codes in a deflated (compressed) block. + Return an error code or zero if it all goes ok. */ +{ + register unsigned e; /* table entry flag/number of extra bits */ + unsigned n, d; /* length and index for copy */ + unsigned w; /* current window position */ + struct huft *t; /* pointer to table entry */ + unsigned ml, md; /* masks for bl and bd bits */ + register ulg b; /* bit buffer */ + register unsigned k; /* number of bits in bit buffer */ + + + /* make local copies of globals */ + b = bb; /* initialize bit buffer */ + k = bk; + w = wp; /* initialize window position */ + + /* inflate the coded data */ + ml = mask_bits[bl]; /* precompute masks for speed */ + md = mask_bits[bd]; + for (;;) /* do until end of block */ + { + NEEDBITS((unsigned)bl) + if ((e = (t = tl + ((unsigned)b & ml))->e) > 16) + do { + if (e == 99) + return 1; + DUMPBITS(t->b) + e -= 16; + NEEDBITS(e) + } while ((e = (t = t->v.t + ((unsigned)b & mask_bits[e]))->e) > 16); + DUMPBITS(t->b) + if (e == 16) /* then it's a literal */ + { + slide[w++] = (uch)t->v.n; + Tracevv((stderr, "%c", slide[w-1])); + if (w == WSIZE) + { + flush_output(w); + w = 0; + } + } + else /* it's an EOB or a length */ + { + /* exit if end of block */ + if (e == 15) + break; + + /* get length of block to copy */ + NEEDBITS(e) + n = t->v.n + ((unsigned)b & mask_bits[e]); + DUMPBITS(e); + + /* decode distance of block to copy */ + NEEDBITS((unsigned)bd) + if ((e = (t = td + ((unsigned)b & md))->e) > 16) + do { + if (e == 99) + return 1; + DUMPBITS(t->b) + e -= 16; + NEEDBITS(e) + } while ((e = (t = t->v.t + ((unsigned)b & mask_bits[e]))->e) > 16); + DUMPBITS(t->b) + NEEDBITS(e) + d = w - t->v.n - ((unsigned)b & mask_bits[e]); + DUMPBITS(e) + Tracevv((stderr,"\\[%d,%d]", w-d, n)); + + /* do the copy */ + do { + n -= (e = (e = WSIZE - ((d &= WSIZE-1) > w ? d : w)) > n ? n : e); +#if !defined(NOMEMCPY) && !defined(DEBUG) + if (w - d >= e) /* (this test assumes unsigned comparison) */ + { + memcpy(slide + w, slide + d, e); + w += e; + d += e; + } + else /* do it slow to avoid memcpy() overlap */ +#endif /* !NOMEMCPY */ + do { + slide[w++] = slide[d++]; + Tracevv((stderr, "%c", slide[w-1])); + } while (--e); + if (w == WSIZE) + { + flush_output(w); + w = 0; + } + } while (n); + } + } + + + /* restore the globals from the locals */ + wp = w; /* restore global window pointer */ + bb = b; /* restore global bit buffer */ + bk = k; + + /* done */ + return 0; + + underrun: + return 4; /* Input underrun */ +} + + + +STATIC int INIT inflate_stored(void) +/* "decompress" an inflated type 0 (stored) block. */ +{ + unsigned n; /* number of bytes in block */ + unsigned w; /* current window position */ + register ulg b; /* bit buffer */ + register unsigned k; /* number of bits in bit buffer */ + +DEBG("<stor"); + + /* make local copies of globals */ + b = bb; /* initialize bit buffer */ + k = bk; + w = wp; /* initialize window position */ + + + /* go to byte boundary */ + n = k & 7; + DUMPBITS(n); + + + /* get the length and its complement */ + NEEDBITS(16) + n = ((unsigned)b & 0xffff); + DUMPBITS(16) + NEEDBITS(16) + if (n != (unsigned)((~b) & 0xffff)) + return 1; /* error in compressed data */ + DUMPBITS(16) + + + /* read and output the compressed data */ + while (n--) + { + NEEDBITS(8) + slide[w++] = (uch)b; + if (w == WSIZE) + { + flush_output(w); + w = 0; + } + DUMPBITS(8) + } + + + /* restore the globals from the locals */ + wp = w; /* restore global window pointer */ + bb = b; /* restore global bit buffer */ + bk = k; + + DEBG(">"); + return 0; + + underrun: + return 4; /* Input underrun */ +} + + +/* + * We use `noinline' here to prevent gcc-3.5 from using too much stack space + */ +STATIC int noinline INIT inflate_fixed(void) +/* decompress an inflated type 1 (fixed Huffman codes) block. We should + either replace this with a custom decoder, or at least precompute the + Huffman tables. */ +{ + int i; /* temporary variable */ + struct huft *tl; /* literal/length code table */ + struct huft *td; /* distance code table */ + int bl; /* lookup bits for tl */ + int bd; /* lookup bits for td */ + unsigned l[288]; /* length list for huft_build */ + +DEBG("<fix"); + + /* set up literal table */ + for (i = 0; i < 144; i++) + l[i] = 8; + for (; i < 256; i++) + l[i] = 9; + for (; i < 280; i++) + l[i] = 7; + for (; i < 288; i++) /* make a complete, but wrong code set */ + l[i] = 8; + bl = 7; + if ((i = huft_build(l, 288, 257, cplens, cplext, &tl, &bl)) != 0) + return i; + + + /* set up distance table */ + for (i = 0; i < 30; i++) /* make an incomplete code set */ + l[i] = 5; + bd = 5; + if ((i = huft_build(l, 30, 0, cpdist, cpdext, &td, &bd)) > 1) + { + huft_free(tl); + + DEBG(">"); + return i; + } + + + /* decompress until an end-of-block code */ + if (inflate_codes(tl, td, bl, bd)) + return 1; + + + /* free the decoding tables, return */ + huft_free(tl); + huft_free(td); + return 0; +} + + +/* + * We use `noinline' here to prevent gcc-3.5 from using too much stack space + */ +STATIC int noinline INIT inflate_dynamic(void) +/* decompress an inflated type 2 (dynamic Huffman codes) block. */ +{ + int i; /* temporary variables */ + unsigned j; + unsigned l; /* last length */ + unsigned m; /* mask for bit lengths table */ + unsigned n; /* number of lengths to get */ + struct huft *tl; /* literal/length code table */ + struct huft *td; /* distance code table */ + int bl; /* lookup bits for tl */ + int bd; /* lookup bits for td */ + unsigned nb; /* number of bit length codes */ + unsigned nl; /* number of literal/length codes */ + unsigned nd; /* number of distance codes */ +#ifdef PKZIP_BUG_WORKAROUND + unsigned ll[288+32]; /* literal/length and distance code lengths */ +#else + unsigned ll[286+30]; /* literal/length and distance code lengths */ +#endif + register ulg b; /* bit buffer */ + register unsigned k; /* number of bits in bit buffer */ + +DEBG("<dyn"); + + /* make local bit buffer */ + b = bb; + k = bk; + + + /* read in table lengths */ + NEEDBITS(5) + nl = 257 + ((unsigned)b & 0x1f); /* number of literal/length codes */ + DUMPBITS(5) + NEEDBITS(5) + nd = 1 + ((unsigned)b & 0x1f); /* number of distance codes */ + DUMPBITS(5) + NEEDBITS(4) + nb = 4 + ((unsigned)b & 0xf); /* number of bit length codes */ + DUMPBITS(4) +#ifdef PKZIP_BUG_WORKAROUND + if (nl > 288 || nd > 32) +#else + if (nl > 286 || nd > 30) +#endif + return 1; /* bad lengths */ + +DEBG("dyn1 "); + + /* read in bit-length-code lengths */ + for (j = 0; j < nb; j++) + { + NEEDBITS(3) + ll[border[j]] = (unsigned)b & 7; + DUMPBITS(3) + } + for (; j < 19; j++) + ll[border[j]] = 0; + +DEBG("dyn2 "); + + /* build decoding table for trees--single level, 7 bit lookup */ + bl = 7; + if ((i = huft_build(ll, 19, 19, NULL, NULL, &tl, &bl)) != 0) + { + if (i == 1) + huft_free(tl); + return i; /* incomplete code set */ + } + +DEBG("dyn3 "); + + /* read in literal and distance code lengths */ + n = nl + nd; + m = mask_bits[bl]; + i = l = 0; + while ((unsigned)i < n) + { + NEEDBITS((unsigned)bl) + j = (td = tl + ((unsigned)b & m))->b; + DUMPBITS(j) + j = td->v.n; + if (j < 16) /* length of code in bits (0..15) */ + ll[i++] = l = j; /* save last length in l */ + else if (j == 16) /* repeat last length 3 to 6 times */ + { + NEEDBITS(2) + j = 3 + ((unsigned)b & 3); + DUMPBITS(2) + if ((unsigned)i + j > n) + return 1; + while (j--) + ll[i++] = l; + } + else if (j == 17) /* 3 to 10 zero length codes */ + { + NEEDBITS(3) + j = 3 + ((unsigned)b & 7); + DUMPBITS(3) + if ((unsigned)i + j > n) + return 1; + while (j--) + ll[i++] = 0; + l = 0; + } + else /* j == 18: 11 to 138 zero length codes */ + { + NEEDBITS(7) + j = 11 + ((unsigned)b & 0x7f); + DUMPBITS(7) + if ((unsigned)i + j > n) + return 1; + while (j--) + ll[i++] = 0; + l = 0; + } + } + +DEBG("dyn4 "); + + /* free decoding table for trees */ + huft_free(tl); + +DEBG("dyn5 "); + + /* restore the global bit buffer */ + bb = b; + bk = k; + +DEBG("dyn5a "); + + /* build the decoding tables for literal/length and distance codes */ + bl = lbits; + if ((i = huft_build(ll, nl, 257, cplens, cplext, &tl, &bl)) != 0) + { +DEBG("dyn5b "); + if (i == 1) { + error("incomplete literal tree"); + huft_free(tl); + } + return i; /* incomplete code set */ + } +DEBG("dyn5c "); + bd = dbits; + if ((i = huft_build(ll + nl, nd, 0, cpdist, cpdext, &td, &bd)) != 0) + { +DEBG("dyn5d "); + if (i == 1) { + error("incomplete distance tree"); +#ifdef PKZIP_BUG_WORKAROUND + i = 0; + } +#else + huft_free(td); + } + huft_free(tl); + return i; /* incomplete code set */ +#endif + } + +DEBG("dyn6 "); + + /* decompress until an end-of-block code */ + if (inflate_codes(tl, td, bl, bd)) + return 1; + +DEBG("dyn7 "); + + /* free the decoding tables, return */ + huft_free(tl); + huft_free(td); + + DEBG(">"); + return 0; + + underrun: + return 4; /* Input underrun */ +} + + + +STATIC int INIT inflate_block( + int *e /* last block flag */ + ) +/* decompress an inflated block */ +{ + unsigned t; /* block type */ + register ulg b; /* bit buffer */ + register unsigned k; /* number of bits in bit buffer */ + + DEBG("<blk"); + + /* make local bit buffer */ + b = bb; + k = bk; + + + /* read in last block bit */ + NEEDBITS(1) + *e = (int)b & 1; + DUMPBITS(1) + + + /* read in block type */ + NEEDBITS(2) + t = (unsigned)b & 3; + DUMPBITS(2) + + + /* restore the global bit buffer */ + bb = b; + bk = k; + + /* inflate that block type */ + if (t == 2) + return inflate_dynamic(); + if (t == 0) + return inflate_stored(); + if (t == 1) + return inflate_fixed(); + + DEBG(">"); + + /* bad block type */ + return 2; + + underrun: + return 4; /* Input underrun */ +} + + + +STATIC int INIT inflate(void) +/* decompress an inflated entry */ +{ + int e; /* last block flag */ + int r; /* result code */ + unsigned h; /* maximum struct huft's malloc'ed */ + void *ptr; + + /* initialize window, bit buffer */ + wp = 0; + bk = 0; + bb = 0; + + + /* decompress until the last block */ + h = 0; + do { + hufts = 0; + gzip_mark(&ptr); + if ((r = inflate_block(&e)) != 0) { + gzip_release(&ptr); + return r; + } + gzip_release(&ptr); + if (hufts > h) + h = hufts; + } while (!e); + + /* Undo too much lookahead. The next read will be byte aligned so we + * can discard unused bits in the last meaningful byte. + */ + while (bk >= 8) { + bk -= 8; + inptr--; + } + + /* flush out slide */ + flush_output(wp); + + + /* return success */ +#ifdef DEBUG + fprintf(stderr, "<%u> ", h); +#endif /* DEBUG */ + return 0; +} + +/********************************************************************** + * + * The following are support routines for inflate.c + * + **********************************************************************/ + +static ulg crc_32_tab[256]; +static ulg crc; /* initialized in makecrc() so it'll reside in bss */ +#define CRC_VALUE (crc ^ 0xffffffffUL) + +/* + * Code to compute the CRC-32 table. Borrowed from + * gzip-1.0.3/makecrc.c. + */ + +static void INIT +makecrc(void) +{ +/* Not copyrighted 1990 Mark Adler */ + + unsigned long c; /* crc shift register */ + unsigned long e; /* polynomial exclusive-or pattern */ + int i; /* counter for all possible eight bit values */ + int k; /* byte being shifted into crc apparatus */ + + /* terms of polynomial defining this crc (except x^32): */ + static const int p[] = {0,1,2,4,5,7,8,10,11,12,16,22,23,26}; + + /* Make exclusive-or pattern from polynomial */ + e = 0; + for (i = 0; i < sizeof(p)/sizeof(int); i++) + e |= 1L << (31 - p[i]); + + crc_32_tab[0] = 0; + + for (i = 1; i < 256; i++) + { + c = 0; + for (k = i | 256; k != 1; k >>= 1) + { + c = c & 1 ? (c >> 1) ^ e : c >> 1; + if (k & 1) + c ^= e; + } + crc_32_tab[i] = c; + } + + /* this is initialized here so this code could reside in ROM */ + crc = (ulg)0xffffffffUL; /* shift register contents */ +} + +/* gzip flag byte */ +#define ASCII_FLAG 0x01 /* bit 0 set: file probably ASCII text */ +#define CONTINUATION 0x02 /* bit 1 set: continuation of multi-part gzip file */ +#define EXTRA_FIELD 0x04 /* bit 2 set: extra field present */ +#define ORIG_NAME 0x08 /* bit 3 set: original file name present */ +#define COMMENT 0x10 /* bit 4 set: file comment present */ +#define ENCRYPTED 0x20 /* bit 5 set: file is encrypted */ +#define RESERVED 0xC0 /* bit 6,7: reserved */ + +/* + * Do the uncompression! + */ +static int INIT gunzip(void) +{ + uch flags; + unsigned char magic[2]; /* magic header */ + char method; + ulg orig_crc = 0; /* original crc */ + ulg orig_len = 0; /* original uncompressed length */ + int res; + + magic[0] = NEXTBYTE(); + magic[1] = NEXTBYTE(); + method = NEXTBYTE(); + + if (magic[0] != 037 || + ((magic[1] != 0213) && (magic[1] != 0236))) { + error("bad gzip magic numbers"); + return -1; + } + + /* We only support method #8, DEFLATED */ + if (method != 8) { + error("internal error, invalid method"); + return -1; + } + + flags = (uch)get_byte(); + if ((flags & ENCRYPTED) != 0) { + error("Input is encrypted"); + return -1; + } + if ((flags & CONTINUATION) != 0) { + error("Multi part input"); + return -1; + } + if ((flags & RESERVED) != 0) { + error("Input has invalid flags"); + return -1; + } + NEXTBYTE(); /* Get timestamp */ + NEXTBYTE(); + NEXTBYTE(); + NEXTBYTE(); + + (void)NEXTBYTE(); /* Ignore extra flags for the moment */ + (void)NEXTBYTE(); /* Ignore OS type for the moment */ + + if ((flags & EXTRA_FIELD) != 0) { + unsigned len = (unsigned)NEXTBYTE(); + len |= ((unsigned)NEXTBYTE())<<8; + while (len--) (void)NEXTBYTE(); + } + + /* Get original file name if it was truncated */ + if ((flags & ORIG_NAME) != 0) { + /* Discard the old name */ + while (NEXTBYTE() != 0) /* null */ ; + } + + /* Discard file comment if any */ + if ((flags & COMMENT) != 0) { + while (NEXTBYTE() != 0) /* null */ ; + } + + /* Decompress */ + if ((res = inflate())) { + switch (res) { + case 0: + break; + case 1: + error("invalid compressed format (err=1)"); + break; + case 2: + error("invalid compressed format (err=2)"); + break; + case 3: + error("out of memory"); + break; + case 4: + error("out of input data"); + break; + default: + error("invalid compressed format (other)"); + } + return -1; + } + + /* Get the crc and original length */ + /* crc32 (see algorithm.doc) + * uncompressed input size modulo 2^32 + */ + orig_crc = (ulg) NEXTBYTE(); + orig_crc |= (ulg) NEXTBYTE() << 8; + orig_crc |= (ulg) NEXTBYTE() << 16; + orig_crc |= (ulg) NEXTBYTE() << 24; + + orig_len = (ulg) NEXTBYTE(); + orig_len |= (ulg) NEXTBYTE() << 8; + orig_len |= (ulg) NEXTBYTE() << 16; + orig_len |= (ulg) NEXTBYTE() << 24; + + /* Validate decompression */ + if (orig_crc != CRC_VALUE) { + error("crc error"); + return -1; + } + if (orig_len != bytes_out) { + error("length error"); + return -1; + } + return 0; + + underrun: /* NEXTBYTE() goto's here if needed */ + error("out of input data"); + return -1; +} + + |