diff options
Diffstat (limited to 'include')
98 files changed, 3375 insertions, 326 deletions
diff --git a/include/acpi/acpi_drivers.h b/include/acpi/acpi_drivers.h index 3090471b2a5..e49c36d38d7 100644 --- a/include/acpi/acpi_drivers.h +++ b/include/acpi/acpi_drivers.h @@ -128,7 +128,7 @@ extern int is_dock_device(acpi_handle handle); extern int register_dock_notifier(struct notifier_block *nb); extern void unregister_dock_notifier(struct notifier_block *nb); extern int register_hotplug_dock_device(acpi_handle handle, - struct acpi_dock_ops *ops, + const struct acpi_dock_ops *ops, void *context); extern void unregister_hotplug_dock_device(acpi_handle handle); #else diff --git a/include/acpi/acpixf.h b/include/acpi/acpixf.h index 2ed0a8486c1..f554a9313b4 100644 --- a/include/acpi/acpixf.h +++ b/include/acpi/acpixf.h @@ -47,7 +47,7 @@ /* Current ACPICA subsystem version in YYYYMMDD format */ -#define ACPI_CA_VERSION 0x20110413 +#define ACPI_CA_VERSION 0x20110623 #include "actypes.h" #include "actbl.h" @@ -69,6 +69,7 @@ extern u32 acpi_gbl_trace_flags; extern u32 acpi_gbl_enable_aml_debug_object; extern u8 acpi_gbl_copy_dsdt_locally; extern u8 acpi_gbl_truncate_io_addresses; +extern u8 acpi_gbl_disable_auto_repair; extern u32 acpi_current_gpe_count; extern struct acpi_table_fadt acpi_gbl_FADT; diff --git a/include/acpi/apei.h b/include/acpi/apei.h index e67b523a50e..51a527d24a8 100644 --- a/include/acpi/apei.h +++ b/include/acpi/apei.h @@ -18,6 +18,11 @@ extern int hest_disable; extern int erst_disable; +#ifdef CONFIG_ACPI_APEI_GHES +extern int ghes_disable; +#else +#define ghes_disable 1 +#endif #ifdef CONFIG_ACPI_APEI void __init acpi_hest_init(void); diff --git a/include/acpi/processor.h b/include/acpi/processor.h index ba4928cae47..67055f18033 100644 --- a/include/acpi/processor.h +++ b/include/acpi/processor.h @@ -337,7 +337,7 @@ extern struct cpuidle_driver acpi_idle_driver; /* in processor_thermal.c */ int acpi_processor_get_limit_info(struct acpi_processor *pr); -extern struct thermal_cooling_device_ops processor_cooling_ops; +extern const struct thermal_cooling_device_ops processor_cooling_ops; #ifdef CONFIG_CPU_FREQ void acpi_thermal_cpufreq_init(void); void acpi_thermal_cpufreq_exit(void); diff --git a/include/linux/acpi.h b/include/linux/acpi.h index 1deb2a73c2d..6001b4da39d 100644 --- a/include/linux/acpi.h +++ b/include/linux/acpi.h @@ -238,7 +238,6 @@ extern int acpi_paddr_to_node(u64 start_addr, u64 size); extern int pnpacpi_disabled; #define PXM_INVAL (-1) -#define NID_INVAL (-1) int acpi_check_resource_conflict(const struct resource *res); @@ -280,6 +279,8 @@ acpi_status acpi_run_osc(acpi_handle handle, struct acpi_osc_context *context); #define OSC_SB_CPUHP_OST_SUPPORT 8 #define OSC_SB_APEI_SUPPORT 16 +extern bool osc_sb_apei_support_acked; + /* PCI defined _OSC bits */ /* _OSC DW1 Definition (OS Support Fields) */ #define OSC_EXT_PCI_CONFIG_SUPPORT 1 diff --git a/include/linux/aer.h b/include/linux/aer.h index 8414de22a77..544abdb2238 100644 --- a/include/linux/aer.h +++ b/include/linux/aer.h @@ -51,5 +51,8 @@ static inline int pci_cleanup_aer_uncorrect_error_status(struct pci_dev *dev) extern void cper_print_aer(const char *prefix, int cper_severity, struct aer_capability_regs *aer); +extern int cper_severity_to_aer(int cper_severity); +extern void aer_recover_queue(int domain, unsigned int bus, unsigned int devfn, + int severity); #endif //_AER_H_ diff --git a/include/linux/amba/pl08x.h b/include/linux/amba/pl08x.h index 3111385b8ca..e6e28f37d8e 100644 --- a/include/linux/amba/pl08x.h +++ b/include/linux/amba/pl08x.h @@ -172,8 +172,11 @@ struct pl08x_dma_chan { int phychan_hold; struct tasklet_struct tasklet; char *name; - struct pl08x_channel_data *cd; - dma_addr_t runtime_addr; + const struct pl08x_channel_data *cd; + dma_addr_t src_addr; + dma_addr_t dst_addr; + u32 src_cctl; + u32 dst_cctl; enum dma_data_direction runtime_direction; dma_cookie_t lc; struct list_head pend_list; @@ -202,7 +205,7 @@ struct pl08x_dma_chan { * @mem_buses: buses which memory can be accessed from: PL08X_AHB1 | PL08X_AHB2 */ struct pl08x_platform_data { - struct pl08x_channel_data *slave_channels; + const struct pl08x_channel_data *slave_channels; unsigned int num_slave_channels; struct pl08x_channel_data memcpy_channel; int (*get_signal)(struct pl08x_dma_chan *); diff --git a/include/linux/bitmap.h b/include/linux/bitmap.h index 3bac44cce14..7ad634501e4 100644 --- a/include/linux/bitmap.h +++ b/include/linux/bitmap.h @@ -146,6 +146,7 @@ extern int bitmap_allocate_region(unsigned long *bitmap, int pos, int order); extern void bitmap_copy_le(void *dst, const unsigned long *src, int nbits); extern int bitmap_ord_to_pos(const unsigned long *bitmap, int n, int bits); +#define BITMAP_FIRST_WORD_MASK(start) (~0UL << ((start) % BITS_PER_LONG)) #define BITMAP_LAST_WORD_MASK(nbits) \ ( \ ((nbits) % BITS_PER_LONG) ? \ diff --git a/include/linux/cpuidle.h b/include/linux/cpuidle.h index 36719ead50e..b51629e15cf 100644 --- a/include/linux/cpuidle.h +++ b/include/linux/cpuidle.h @@ -122,6 +122,8 @@ struct cpuidle_driver { }; #ifdef CONFIG_CPU_IDLE +extern void disable_cpuidle(void); +extern int cpuidle_idle_call(void); extern int cpuidle_register_driver(struct cpuidle_driver *drv); struct cpuidle_driver *cpuidle_get_driver(void); @@ -135,6 +137,8 @@ extern int cpuidle_enable_device(struct cpuidle_device *dev); extern void cpuidle_disable_device(struct cpuidle_device *dev); #else +static inline void disable_cpuidle(void) { } +static inline int cpuidle_idle_call(void) { return -ENODEV; } static inline int cpuidle_register_driver(struct cpuidle_driver *drv) {return -ENODEV; } diff --git a/include/linux/device-mapper.h b/include/linux/device-mapper.h index 4427e045405..3fa1f3d90ce 100644 --- a/include/linux/device-mapper.h +++ b/include/linux/device-mapper.h @@ -208,6 +208,49 @@ struct dm_target_callbacks { int dm_register_target(struct target_type *t); void dm_unregister_target(struct target_type *t); +/* + * Target argument parsing. + */ +struct dm_arg_set { + unsigned argc; + char **argv; +}; + +/* + * The minimum and maximum value of a numeric argument, together with + * the error message to use if the number is found to be outside that range. + */ +struct dm_arg { + unsigned min; + unsigned max; + char *error; +}; + +/* + * Validate the next argument, either returning it as *value or, if invalid, + * returning -EINVAL and setting *error. + */ +int dm_read_arg(struct dm_arg *arg, struct dm_arg_set *arg_set, + unsigned *value, char **error); + +/* + * Process the next argument as the start of a group containing between + * arg->min and arg->max further arguments. Either return the size as + * *num_args or, if invalid, return -EINVAL and set *error. + */ +int dm_read_arg_group(struct dm_arg *arg, struct dm_arg_set *arg_set, + unsigned *num_args, char **error); + +/* + * Return the current argument and shift to the next. + */ +const char *dm_shift_arg(struct dm_arg_set *as); + +/* + * Move through num_args arguments. + */ +void dm_consume_args(struct dm_arg_set *as, unsigned num_args); + /*----------------------------------------------------------------- * Functions for creating and manipulating mapped devices. * Drop the reference with dm_put when you finish with the object. diff --git a/include/linux/dm-ioctl.h b/include/linux/dm-ioctl.h index 3708455ee6c..0cb8eff76bd 100644 --- a/include/linux/dm-ioctl.h +++ b/include/linux/dm-ioctl.h @@ -267,9 +267,9 @@ enum { #define DM_DEV_SET_GEOMETRY _IOWR(DM_IOCTL, DM_DEV_SET_GEOMETRY_CMD, struct dm_ioctl) #define DM_VERSION_MAJOR 4 -#define DM_VERSION_MINOR 20 +#define DM_VERSION_MINOR 21 #define DM_VERSION_PATCHLEVEL 0 -#define DM_VERSION_EXTRA "-ioctl (2011-02-02)" +#define DM_VERSION_EXTRA "-ioctl (2011-07-06)" /* Status bits */ #define DM_READONLY_FLAG (1 << 0) /* In/Out */ diff --git a/include/linux/dm-kcopyd.h b/include/linux/dm-kcopyd.h index 298d587e349..5e54458e920 100644 --- a/include/linux/dm-kcopyd.h +++ b/include/linux/dm-kcopyd.h @@ -42,5 +42,20 @@ int dm_kcopyd_copy(struct dm_kcopyd_client *kc, struct dm_io_region *from, unsigned num_dests, struct dm_io_region *dests, unsigned flags, dm_kcopyd_notify_fn fn, void *context); +/* + * Prepare a callback and submit it via the kcopyd thread. + * + * dm_kcopyd_prepare_callback allocates a callback structure and returns it. + * It must not be called from interrupt context. + * The returned value should be passed into dm_kcopyd_do_callback. + * + * dm_kcopyd_do_callback submits the callback. + * It may be called from interrupt context. + * The callback is issued from the kcopyd thread. + */ +void *dm_kcopyd_prepare_callback(struct dm_kcopyd_client *kc, + dm_kcopyd_notify_fn fn, void *context); +void dm_kcopyd_do_callback(void *job, int read_err, unsigned long write_err); + #endif /* __KERNEL__ */ #endif /* _LINUX_DM_KCOPYD_H */ diff --git a/include/linux/dvb/audio.h b/include/linux/dvb/audio.h index fec66bd24f2..d47bccd604e 100644 --- a/include/linux/dvb/audio.h +++ b/include/linux/dvb/audio.h @@ -67,7 +67,7 @@ typedef struct audio_status { typedef -struct audio_karaoke{ /* if Vocal1 or Vocal2 are non-zero, they get mixed */ +struct audio_karaoke { /* if Vocal1 or Vocal2 are non-zero, they get mixed */ int vocal1; /* into left and right t at 70% each */ int vocal2; /* if both, Vocal1 and Vocal2 are non-zero, Vocal1 gets*/ int melody; /* mixed into the left channel and */ diff --git a/include/linux/efi.h b/include/linux/efi.h index ec257269392..2362a0bc7f0 100644 --- a/include/linux/efi.h +++ b/include/linux/efi.h @@ -19,6 +19,7 @@ #include <linux/rtc.h> #include <linux/ioport.h> #include <linux/pfn.h> +#include <linux/pstore.h> #include <asm/page.h> #include <asm/system.h> @@ -232,6 +233,9 @@ typedef efi_status_t efi_query_capsule_caps_t(efi_capsule_header_t **capsules, #define UV_SYSTEM_TABLE_GUID \ EFI_GUID( 0x3b13a7d4, 0x633e, 0x11dd, 0x93, 0xec, 0xda, 0x25, 0x56, 0xd8, 0x95, 0x93 ) +#define LINUX_EFI_CRASH_GUID \ + EFI_GUID( 0xcfc8fc79, 0xbe2e, 0x4ddc, 0x97, 0xf0, 0x9f, 0x98, 0xbf, 0xe2, 0x98, 0xa0 ) + typedef struct { efi_guid_t guid; unsigned long table; @@ -458,6 +462,8 @@ struct efivars { struct kset *kset; struct bin_attribute *new_var, *del_var; const struct efivar_operations *ops; + struct efivar_entry *walk_entry; + struct pstore_info efi_pstore_info; }; int register_efivars(struct efivars *efivars, diff --git a/include/linux/fault-inject.h b/include/linux/fault-inject.h index 3ff060ac781..c6f996f2abb 100644 --- a/include/linux/fault-inject.h +++ b/include/linux/fault-inject.h @@ -25,10 +25,6 @@ struct fault_attr { unsigned long reject_end; unsigned long count; - -#ifdef CONFIG_FAULT_INJECTION_DEBUG_FS - struct dentry *dir; -#endif }; #define FAULT_ATTR_INITIALIZER { \ @@ -45,19 +41,15 @@ bool should_fail(struct fault_attr *attr, ssize_t size); #ifdef CONFIG_FAULT_INJECTION_DEBUG_FS -int init_fault_attr_dentries(struct fault_attr *attr, const char *name); -void cleanup_fault_attr_dentries(struct fault_attr *attr); +struct dentry *fault_create_debugfs_attr(const char *name, + struct dentry *parent, struct fault_attr *attr); #else /* CONFIG_FAULT_INJECTION_DEBUG_FS */ -static inline int init_fault_attr_dentries(struct fault_attr *attr, - const char *name) -{ - return -ENODEV; -} - -static inline void cleanup_fault_attr_dentries(struct fault_attr *attr) +static inline struct dentry *fault_create_debugfs_attr(const char *name, + struct dentry *parent, struct fault_attr *attr) { + return ERR_PTR(-ENODEV); } #endif /* CONFIG_FAULT_INJECTION_DEBUG_FS */ diff --git a/include/linux/fs.h b/include/linux/fs.h index f23bcb77260..786b3b1113c 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -2317,11 +2317,18 @@ extern int should_remove_suid(struct dentry *); extern int file_remove_suid(struct file *); extern void __insert_inode_hash(struct inode *, unsigned long hashval); -extern void remove_inode_hash(struct inode *); static inline void insert_inode_hash(struct inode *inode) { __insert_inode_hash(inode, inode->i_ino); } + +extern void __remove_inode_hash(struct inode *); +static inline void remove_inode_hash(struct inode *inode) +{ + if (!inode_unhashed(inode)) + __remove_inode_hash(inode); +} + extern void inode_sb_list_add(struct inode *inode); #ifdef CONFIG_BLOCK diff --git a/include/linux/genalloc.h b/include/linux/genalloc.h index 5bbebda78b0..5e98eeb2af3 100644 --- a/include/linux/genalloc.h +++ b/include/linux/genalloc.h @@ -1,8 +1,26 @@ /* - * Basic general purpose allocator for managing special purpose memory - * not managed by the regular kmalloc/kfree interface. - * Uses for this includes on-device special memory, uncached memory - * etc. + * Basic general purpose allocator for managing special purpose + * memory, for example, memory that is not managed by the regular + * kmalloc/kfree interface. Uses for this includes on-device special + * memory, uncached memory etc. + * + * It is safe to use the allocator in NMI handlers and other special + * unblockable contexts that could otherwise deadlock on locks. This + * is implemented by using atomic operations and retries on any + * conflicts. The disadvantage is that there may be livelocks in + * extreme cases. For better scalability, one allocator can be used + * for each CPU. + * + * The lockless operation only works if there is enough memory + * available. If new memory is added to the pool a lock has to be + * still taken. So any user relying on locklessness has to ensure + * that sufficient memory is preallocated. + * + * The basic atomic operation of this allocator is cmpxchg on long. + * On architectures that don't have NMI-safe cmpxchg implementation, + * the allocator can NOT be used in NMI handler. So code uses the + * allocator in NMI handler should depend on + * CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG. * * This source code is licensed under the GNU General Public License, * Version 2. See the file COPYING for more details. @@ -15,7 +33,7 @@ * General purpose special memory pool descriptor. */ struct gen_pool { - rwlock_t lock; + spinlock_t lock; struct list_head chunks; /* list of chunks in this pool */ int min_alloc_order; /* minimum allocation order */ }; @@ -24,8 +42,8 @@ struct gen_pool { * General purpose special memory pool chunk descriptor. */ struct gen_pool_chunk { - spinlock_t lock; struct list_head next_chunk; /* next chunk in pool */ + atomic_t avail; phys_addr_t phys_addr; /* physical starting address of memory chunk */ unsigned long start_addr; /* starting address of memory chunk */ unsigned long end_addr; /* ending address of memory chunk */ @@ -56,4 +74,8 @@ static inline int gen_pool_add(struct gen_pool *pool, unsigned long addr, extern void gen_pool_destroy(struct gen_pool *); extern unsigned long gen_pool_alloc(struct gen_pool *, size_t); extern void gen_pool_free(struct gen_pool *, unsigned long, size_t); +extern void gen_pool_for_each_chunk(struct gen_pool *, + void (*)(struct gen_pool *, struct gen_pool_chunk *, void *), void *); +extern size_t gen_pool_avail(struct gen_pool *); +extern size_t gen_pool_size(struct gen_pool *); #endif /* __GENALLOC_H__ */ diff --git a/include/linux/gfp.h b/include/linux/gfp.h index cb4089254f0..3a76faf6a3e 100644 --- a/include/linux/gfp.h +++ b/include/linux/gfp.h @@ -92,7 +92,7 @@ struct vm_area_struct; */ #define __GFP_NOTRACK_FALSE_POSITIVE (__GFP_NOTRACK) -#define __GFP_BITS_SHIFT 23 /* Room for 23 __GFP_FOO bits */ +#define __GFP_BITS_SHIFT 24 /* Room for N __GFP_FOO bits */ #define __GFP_BITS_MASK ((__force gfp_t)((1 << __GFP_BITS_SHIFT) - 1)) /* This equals 0, but use constants in case they ever change */ diff --git a/include/linux/idr.h b/include/linux/idr.h index 13a801f3d02..255491cf522 100644 --- a/include/linux/idr.h +++ b/include/linux/idr.h @@ -146,6 +146,10 @@ void ida_remove(struct ida *ida, int id); void ida_destroy(struct ida *ida); void ida_init(struct ida *ida); +int ida_simple_get(struct ida *ida, unsigned int start, unsigned int end, + gfp_t gfp_mask); +void ida_simple_remove(struct ida *ida, unsigned int id); + void __init idr_init_cache(void); #endif /* __IDR_H__ */ diff --git a/include/linux/ioport.h b/include/linux/ioport.h index c2ebfe66177..9d57a71775b 100644 --- a/include/linux/ioport.h +++ b/include/linux/ioport.h @@ -162,6 +162,7 @@ extern int allocate_resource(struct resource *root, struct resource *new, resource_size_t, resource_size_t), void *alignf_data); +struct resource *lookup_resource(struct resource *root, resource_size_t start); int adjust_resource(struct resource *res, resource_size_t start, resource_size_t size); resource_size_t resource_alignment(struct resource *res); diff --git a/include/linux/irq.h b/include/linux/irq.h index 5f695041090..87a06f345bd 100644 --- a/include/linux/irq.h +++ b/include/linux/irq.h @@ -108,14 +108,18 @@ enum { }; struct msi_desc; +struct irq_domain; /** * struct irq_data - per irq and irq chip data passed down to chip functions * @irq: interrupt number + * @hwirq: hardware interrupt number, local to the interrupt domain * @node: node index useful for balancing * @state_use_accessors: status information for irq chip functions. * Use accessor functions to deal with it * @chip: low level interrupt hardware access + * @domain: Interrupt translation domain; responsible for mapping + * between hwirq number and linux irq number. * @handler_data: per-IRQ data for the irq_chip methods * @chip_data: platform-specific per-chip private data for the chip * methods, to allow shared chip implementations @@ -128,9 +132,11 @@ struct msi_desc; */ struct irq_data { unsigned int irq; + unsigned long hwirq; unsigned int node; unsigned int state_use_accessors; struct irq_chip *chip; + struct irq_domain *domain; void *handler_data; void *chip_data; struct msi_desc *msi_desc; diff --git a/include/linux/irqdomain.h b/include/linux/irqdomain.h new file mode 100644 index 00000000000..e807ad687a0 --- /dev/null +++ b/include/linux/irqdomain.h @@ -0,0 +1,91 @@ +/* + * irq_domain - IRQ translation domains + * + * Translation infrastructure between hw and linux irq numbers. This is + * helpful for interrupt controllers to implement mapping between hardware + * irq numbers and the Linux irq number space. + * + * irq_domains also have a hook for translating device tree interrupt + * representation into a hardware irq number that can be mapped back to a + * Linux irq number without any extra platform support code. + * + * irq_domain is expected to be embedded in an interrupt controller's private + * data structure. + */ +#ifndef _LINUX_IRQDOMAIN_H +#define _LINUX_IRQDOMAIN_H + +#include <linux/irq.h> +#include <linux/mod_devicetable.h> + +#ifdef CONFIG_IRQ_DOMAIN +struct device_node; +struct irq_domain; + +/** + * struct irq_domain_ops - Methods for irq_domain objects + * @to_irq: (optional) given a local hardware irq number, return the linux + * irq number. If to_irq is not implemented, then the irq_domain + * will use this translation: irq = (domain->irq_base + hwirq) + * @dt_translate: Given a device tree node and interrupt specifier, decode + * the hardware irq number and linux irq type value. + */ +struct irq_domain_ops { + unsigned int (*to_irq)(struct irq_domain *d, unsigned long hwirq); + +#ifdef CONFIG_OF + int (*dt_translate)(struct irq_domain *d, struct device_node *node, + const u32 *intspec, unsigned int intsize, + unsigned long *out_hwirq, unsigned int *out_type); +#endif /* CONFIG_OF */ +}; + +/** + * struct irq_domain - Hardware interrupt number translation object + * @list: Element in global irq_domain list. + * @irq_base: Start of irq_desc range assigned to the irq_domain. The creator + * of the irq_domain is responsible for allocating the array of + * irq_desc structures. + * @nr_irq: Number of irqs managed by the irq domain + * @ops: pointer to irq_domain methods + * @priv: private data pointer for use by owner. Not touched by irq_domain + * core code. + * @of_node: (optional) Pointer to device tree nodes associated with the + * irq_domain. Used when decoding device tree interrupt specifiers. + */ +struct irq_domain { + struct list_head list; + unsigned int irq_base; + unsigned int nr_irq; + const struct irq_domain_ops *ops; + void *priv; + struct device_node *of_node; +}; + +/** + * irq_domain_to_irq() - Translate from a hardware irq to a linux irq number + * + * Returns the linux irq number associated with a hardware irq. By default, + * the mapping is irq == domain->irq_base + hwirq, but this mapping can + * be overridden if the irq_domain implements a .to_irq() hook. + */ +static inline unsigned int irq_domain_to_irq(struct irq_domain *d, + unsigned long hwirq) +{ + return d->ops->to_irq ? d->ops->to_irq(d, hwirq) : d->irq_base + hwirq; +} + +extern void irq_domain_add(struct irq_domain *domain); +extern void irq_domain_del(struct irq_domain *domain); +#endif /* CONFIG_IRQ_DOMAIN */ + +#if defined(CONFIG_IRQ_DOMAIN) && defined(CONFIG_OF_IRQ) +extern void irq_domain_add_simple(struct device_node *controller, int irq_base); +extern void irq_domain_generate_simple(const struct of_device_id *match, + u64 phys_base, unsigned int irq_start); +#else /* CONFIG_IRQ_DOMAIN && CONFIG_OF_IRQ */ +static inline void irq_domain_generate_simple(const struct of_device_id *match, + u64 phys_base, unsigned int irq_start) { } +#endif /* CONFIG_IRQ_DOMAIN && CONFIG_OF_IRQ */ + +#endif /* _LINUX_IRQDOMAIN_H */ diff --git a/include/linux/jbd2.h b/include/linux/jbd2.h index d087c2e7b2a..38f307b8c33 100644 --- a/include/linux/jbd2.h +++ b/include/linux/jbd2.h @@ -1329,12 +1329,6 @@ extern int jbd_blocks_per_page(struct inode *inode); #define BUFFER_TRACE2(bh, bh2, info) do {} while (0) #define JBUFFER_TRACE(jh, info) do {} while (0) -/* - * jbd2_dev_to_name is a utility function used by the jbd2 and ext4 - * tracing infrastructure to map a dev_t to a device name. - */ -extern const char *jbd2_dev_to_name(dev_t device); - #endif /* __KERNEL__ */ #endif /* _LINUX_JBD2_H */ diff --git a/include/linux/kconfig.h b/include/linux/kconfig.h new file mode 100644 index 00000000000..067eda0e4b3 --- /dev/null +++ b/include/linux/kconfig.h @@ -0,0 +1,32 @@ +#ifndef __LINUX_KCONFIG_H +#define __LINUX_KCONFIG_H + +#include <generated/autoconf.h> + +/* + * Helper macros to use CONFIG_ options in C expressions. Note that + * these only work with boolean and tristate options. + */ + +/* + * IS_ENABLED(CONFIG_FOO) evaluates to 1 if CONFIG_FOO is set to 'y' or 'm', + * 0 otherwise. + * + */ +#define IS_ENABLED(option) \ + (__enabled_ ## option || __enabled_ ## option ## _MODULE) + +/* + * IS_BUILTIN(CONFIG_FOO) evaluates to 1 if CONFIG_FOO is set to 'y', 0 + * otherwise. For boolean options, this is equivalent to + * IS_ENABLED(CONFIG_FOO). + */ +#define IS_BUILTIN(option) __enabled_ ## option + +/* + * IS_MODULE(CONFIG_FOO) evaluates to 1 if CONFIG_FOO is set to 'm', 0 + * otherwise. + */ +#define IS_MODULE(option) __enabled_ ## option ## _MODULE + +#endif /* __LINUX_KCONFIG_H */ diff --git a/include/linux/llist.h b/include/linux/llist.h new file mode 100644 index 00000000000..aa0c8b5b3cd --- /dev/null +++ b/include/linux/llist.h @@ -0,0 +1,126 @@ +#ifndef LLIST_H +#define LLIST_H +/* + * Lock-less NULL terminated single linked list + * + * If there are multiple producers and multiple consumers, llist_add + * can be used in producers and llist_del_all can be used in + * consumers. They can work simultaneously without lock. But + * llist_del_first can not be used here. Because llist_del_first + * depends on list->first->next does not changed if list->first is not + * changed during its operation, but llist_del_first, llist_add, + * llist_add (or llist_del_all, llist_add, llist_add) sequence in + * another consumer may violate that. + * + * If there are multiple producers and one consumer, llist_add can be + * used in producers and llist_del_all or llist_del_first can be used + * in the consumer. + * + * This can be summarized as follow: + * + * | add | del_first | del_all + * add | - | - | - + * del_first | | L | L + * del_all | | | - + * + * Where "-" stands for no lock is needed, while "L" stands for lock + * is needed. + * + * The list entries deleted via llist_del_all can be traversed with + * traversing function such as llist_for_each etc. But the list + * entries can not be traversed safely before deleted from the list. + * The order of deleted entries is from the newest to the oldest added + * one. If you want to traverse from the oldest to the newest, you + * must reverse the order by yourself before traversing. + * + * The basic atomic operation of this list is cmpxchg on long. On + * architectures that don't have NMI-safe cmpxchg implementation, the + * list can NOT be used in NMI handler. So code uses the list in NMI + * handler should depend on CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG. + */ + +struct llist_head { + struct llist_node *first; +}; + +struct llist_node { + struct llist_node *next; +}; + +#define LLIST_HEAD_INIT(name) { NULL } +#define LLIST_HEAD(name) struct llist_head name = LLIST_HEAD_INIT(name) + +/** + * init_llist_head - initialize lock-less list head + * @head: the head for your lock-less list + */ +static inline void init_llist_head(struct llist_head *list) +{ + list->first = NULL; +} + +/** + * llist_entry - get the struct of this entry + * @ptr: the &struct llist_node pointer. + * @type: the type of the struct this is embedded in. + * @member: the name of the llist_node within the struct. + */ +#define llist_entry(ptr, type, member) \ + container_of(ptr, type, member) + +/** + * llist_for_each - iterate over some deleted entries of a lock-less list + * @pos: the &struct llist_node to use as a loop cursor + * @node: the first entry of deleted list entries + * + * In general, some entries of the lock-less list can be traversed + * safely only after being deleted from list, so start with an entry + * instead of list head. + * + * If being used on entries deleted from lock-less list directly, the + * traverse order is from the newest to the oldest added entry. If + * you want to traverse from the oldest to the newest, you must + * reverse the order by yourself before traversing. + */ +#define llist_for_each(pos, node) \ + for ((pos) = (node); pos; (pos) = (pos)->next) + +/** + * llist_for_each_entry - iterate over some deleted entries of lock-less list of given type + * @pos: the type * to use as a loop cursor. + * @node: the fist entry of deleted list entries. + * @member: the name of the llist_node with the struct. + * + * In general, some entries of the lock-less list can be traversed + * safely only after being removed from list, so start with an entry + * instead of list head. + * + * If being used on entries deleted from lock-less list directly, the + * traverse order is from the newest to the oldest added entry. If + * you want to traverse from the oldest to the newest, you must + * reverse the order by yourself before traversing. + */ +#define llist_for_each_entry(pos, node, member) \ + for ((pos) = llist_entry((node), typeof(*(pos)), member); \ + &(pos)->member != NULL; \ + (pos) = llist_entry((pos)->member.next, typeof(*(pos)), member)) + +/** + * llist_empty - tests whether a lock-less list is empty + * @head: the list to test + * + * Not guaranteed to be accurate or up to date. Just a quick way to + * test whether the list is empty without deleting something from the + * list. + */ +static inline int llist_empty(const struct llist_head *head) +{ + return ACCESS_ONCE(head->first) == NULL; +} + +void llist_add(struct llist_node *new, struct llist_head *head); +void llist_add_batch(struct llist_node *new_first, struct llist_node *new_last, + struct llist_head *head); +struct llist_node *llist_del_first(struct llist_head *head); +struct llist_node *llist_del_all(struct llist_head *head); +#endif /* LLIST_H */ diff --git a/include/linux/memcontrol.h b/include/linux/memcontrol.h index b9660078691..3b535db00a9 100644 --- a/include/linux/memcontrol.h +++ b/include/linux/memcontrol.h @@ -86,8 +86,6 @@ extern void mem_cgroup_uncharge_end(void); extern void mem_cgroup_uncharge_page(struct page *page); extern void mem_cgroup_uncharge_cache_page(struct page *page); -extern int mem_cgroup_shmem_charge_fallback(struct page *page, - struct mm_struct *mm, gfp_t gfp_mask); extern void mem_cgroup_out_of_memory(struct mem_cgroup *mem, gfp_t gfp_mask); int task_in_mem_cgroup(struct task_struct *task, const struct mem_cgroup *mem); @@ -225,12 +223,6 @@ static inline void mem_cgroup_uncharge_cache_page(struct page *page) { } -static inline int mem_cgroup_shmem_charge_fallback(struct page *page, - struct mm_struct *mm, gfp_t gfp_mask) -{ - return 0; -} - static inline void mem_cgroup_add_lru_list(struct page *page, int lru) { } diff --git a/include/linux/mfd/aat2870.h b/include/linux/mfd/aat2870.h new file mode 100644 index 00000000000..f7316c29bde --- /dev/null +++ b/include/linux/mfd/aat2870.h @@ -0,0 +1,181 @@ +/* + * linux/include/linux/mfd/aat2870.h + * + * Copyright (c) 2011, NVIDIA Corporation. + * Author: Jin Park <jinyoungp@nvidia.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + */ + +#ifndef __LINUX_MFD_AAT2870_H +#define __LINUX_MFD_AAT2870_H + +#include <linux/debugfs.h> +#include <linux/i2c.h> + +/* Register offsets */ +#define AAT2870_BL_CH_EN 0x00 +#define AAT2870_BLM 0x01 +#define AAT2870_BLS 0x02 +#define AAT2870_BL1 0x03 +#define AAT2870_BL2 0x04 +#define AAT2870_BL3 0x05 +#define AAT2870_BL4 0x06 +#define AAT2870_BL5 0x07 +#define AAT2870_BL6 0x08 +#define AAT2870_BL7 0x09 +#define AAT2870_BL8 0x0A +#define AAT2870_FLR 0x0B +#define AAT2870_FM 0x0C +#define AAT2870_FS 0x0D +#define AAT2870_ALS_CFG0 0x0E +#define AAT2870_ALS_CFG1 0x0F +#define AAT2870_ALS_CFG2 0x10 +#define AAT2870_AMB 0x11 +#define AAT2870_ALS0 0x12 +#define AAT2870_ALS1 0x13 +#define AAT2870_ALS2 0x14 +#define AAT2870_ALS3 0x15 +#define AAT2870_ALS4 0x16 +#define AAT2870_ALS5 0x17 +#define AAT2870_ALS6 0x18 +#define AAT2870_ALS7 0x19 +#define AAT2870_ALS8 0x1A +#define AAT2870_ALS9 0x1B +#define AAT2870_ALSA 0x1C +#define AAT2870_ALSB 0x1D +#define AAT2870_ALSC 0x1E +#define AAT2870_ALSD 0x1F +#define AAT2870_ALSE 0x20 +#define AAT2870_ALSF 0x21 +#define AAT2870_SUB_SET 0x22 +#define AAT2870_SUB_CTRL 0x23 +#define AAT2870_LDO_AB 0x24 +#define AAT2870_LDO_CD 0x25 +#define AAT2870_LDO_EN 0x26 +#define AAT2870_REG_NUM 0x27 + +/* Device IDs */ +enum aat2870_id { + AAT2870_ID_BL, + AAT2870_ID_LDOA, + AAT2870_ID_LDOB, + AAT2870_ID_LDOC, + AAT2870_ID_LDOD +}; + +/* Backlight channels */ +#define AAT2870_BL_CH1 0x01 +#define AAT2870_BL_CH2 0x02 +#define AAT2870_BL_CH3 0x04 +#define AAT2870_BL_CH4 0x08 +#define AAT2870_BL_CH5 0x10 +#define AAT2870_BL_CH6 0x20 +#define AAT2870_BL_CH7 0x40 +#define AAT2870_BL_CH8 0x80 +#define AAT2870_BL_CH_ALL 0xFF + +/* Backlight current magnitude (mA) */ +enum aat2870_current { + AAT2870_CURRENT_0_45 = 1, + AAT2870_CURRENT_0_90, + AAT2870_CURRENT_1_80, + AAT2870_CURRENT_2_70, + AAT2870_CURRENT_3_60, + AAT2870_CURRENT_4_50, + AAT2870_CURRENT_5_40, + AAT2870_CURRENT_6_30, + AAT2870_CURRENT_7_20, + AAT2870_CURRENT_8_10, + AAT2870_CURRENT_9_00, + AAT2870_CURRENT_9_90, + AAT2870_CURRENT_10_8, + AAT2870_CURRENT_11_7, + AAT2870_CURRENT_12_6, + AAT2870_CURRENT_13_5, + AAT2870_CURRENT_14_4, + AAT2870_CURRENT_15_3, + AAT2870_CURRENT_16_2, + AAT2870_CURRENT_17_1, + AAT2870_CURRENT_18_0, + AAT2870_CURRENT_18_9, + AAT2870_CURRENT_19_8, + AAT2870_CURRENT_20_7, + AAT2870_CURRENT_21_6, + AAT2870_CURRENT_22_5, + AAT2870_CURRENT_23_4, + AAT2870_CURRENT_24_3, + AAT2870_CURRENT_25_2, + AAT2870_CURRENT_26_1, + AAT2870_CURRENT_27_0, + AAT2870_CURRENT_27_9 +}; + +struct aat2870_register { + bool readable; + bool writeable; + u8 value; +}; + +struct aat2870_data { + struct device *dev; + struct i2c_client *client; + + struct mutex io_lock; + struct aat2870_register *reg_cache; /* register cache */ + int en_pin; /* enable GPIO pin (if < 0, ignore this value) */ + bool is_enable; + + /* init and uninit for platform specified */ + int (*init)(struct aat2870_data *aat2870); + void (*uninit)(struct aat2870_data *aat2870); + + /* i2c io funcntions */ + int (*read)(struct aat2870_data *aat2870, u8 addr, u8 *val); + int (*write)(struct aat2870_data *aat2870, u8 addr, u8 val); + int (*update)(struct aat2870_data *aat2870, u8 addr, u8 mask, u8 val); + + /* for debugfs */ + struct dentry *dentry_root; + struct dentry *dentry_reg; +}; + +struct aat2870_subdev_info { + int id; + const char *name; + void *platform_data; +}; + +struct aat2870_platform_data { + int en_pin; /* enable GPIO pin (if < 0, ignore this value) */ + + struct aat2870_subdev_info *subdevs; + int num_subdevs; + + /* init and uninit for platform specified */ + int (*init)(struct aat2870_data *aat2870); + void (*uninit)(struct aat2870_data *aat2870); +}; + +struct aat2870_bl_platform_data { + /* backlight channels, default is AAT2870_BL_CH_ALL */ + int channels; + /* backlight current magnitude, default is AAT2870_CURRENT_27_9 */ + int max_current; + /* maximum brightness, default is 255 */ + int max_brightness; +}; + +#endif /* __LINUX_MFD_AAT2870_H */ diff --git a/include/linux/mfd/ab8500.h b/include/linux/mfd/ab8500.h index b3184307519..838c6b487cc 100644 --- a/include/linux/mfd/ab8500.h +++ b/include/linux/mfd/ab8500.h @@ -28,6 +28,7 @@ #define AB8500_INTERRUPT 0xE #define AB8500_RTC 0xF #define AB8500_MISC 0x10 +#define AB8500_DEVELOPMENT 0x11 #define AB8500_DEBUG 0x12 #define AB8500_PROD_TEST 0x13 #define AB8500_OTP_EMUL 0x15 @@ -74,13 +75,6 @@ #define AB8500_INT_ACC_DETECT_21DB_F 37 #define AB8500_INT_ACC_DETECT_21DB_R 38 #define AB8500_INT_GP_SW_ADC_CONV_END 39 -#define AB8500_INT_ACC_DETECT_1DB_F 33 -#define AB8500_INT_ACC_DETECT_1DB_R 34 -#define AB8500_INT_ACC_DETECT_22DB_F 35 -#define AB8500_INT_ACC_DETECT_22DB_R 36 -#define AB8500_INT_ACC_DETECT_21DB_F 37 -#define AB8500_INT_ACC_DETECT_21DB_R 38 -#define AB8500_INT_GP_SW_ADC_CONV_END 39 #define AB8500_INT_GPIO6R 40 #define AB8500_INT_GPIO7R 41 #define AB8500_INT_GPIO8R 42 diff --git a/include/linux/mfd/max8997.h b/include/linux/mfd/max8997.h index 60931d08942..0bbd13dbe33 100644 --- a/include/linux/mfd/max8997.h +++ b/include/linux/mfd/max8997.h @@ -107,11 +107,16 @@ struct max8997_platform_data { unsigned int buck5_voltage[8]; bool buck5_gpiodvs; + /* ---- Charger control ---- */ + /* eoc stands for 'end of charge' */ + int eoc_mA; /* 50 ~ 200mA by 10mA step */ + /* charge Full Timeout */ + int timeout; /* 0 (no timeout), 5, 6, 7 hours */ + /* MUIC: Not implemented */ /* HAPTIC: Not implemented */ /* RTC: Not implemented */ /* Flash: Not implemented */ - /* Charger control: Not implemented */ }; #endif /* __LINUX_MFD_MAX8998_H */ diff --git a/include/linux/mfd/max8998.h b/include/linux/mfd/max8998.h index 61daa167b57..f4f0dfa4698 100644 --- a/include/linux/mfd/max8998.h +++ b/include/linux/mfd/max8998.h @@ -87,6 +87,15 @@ struct max8998_regulator_data { * @wakeup: Allow to wake up from suspend * @rtc_delay: LP3974 RTC chip bug that requires delay after a register * write before reading it. + * @eoc: End of Charge Level in percent: 10% ~ 45% by 5% step + * If it equals 0, leave it unchanged. + * Otherwise, it is a invalid value. + * @restart: Restart Level in mV: 100, 150, 200, and -1 for disable. + * If it equals 0, leave it unchanged. + * Otherwise, it is a invalid value. + * @timeout: Full Timeout in hours: 5, 6, 7, and -1 for disable. + * If it equals 0, leave it unchanged. + * Otherwise, leave it unchanged. */ struct max8998_platform_data { struct max8998_regulator_data *regulators; @@ -107,6 +116,9 @@ struct max8998_platform_data { int buck2_default_idx; bool wakeup; bool rtc_delay; + int eoc; + int restart; + int timeout; }; #endif /* __LINUX_MFD_MAX8998_H */ diff --git a/include/linux/mfd/stmpe.h b/include/linux/mfd/stmpe.h index e762c270d8d..be1af7c42e5 100644 --- a/include/linux/mfd/stmpe.h +++ b/include/linux/mfd/stmpe.h @@ -57,6 +57,7 @@ struct stmpe_variant_info; * @irq_lock: IRQ bus lock * @dev: device, mostly for dev_dbg() * @i2c: i2c client + * @partnum: part number * @variant: the detected STMPE model number * @regs: list of addresses of registers which are at different addresses on * different variants. Indexed by one of STMPE_IDX_*. @@ -121,6 +122,8 @@ struct stmpe_keypad_platform_data { * @norequest_mask: bitmask specifying which GPIOs should _not_ be * requestable due to different usage (e.g. touch, keypad) * STMPE_GPIO_NOREQ_* macros can be used here. + * @setup: board specific setup callback. + * @remove: board specific remove callback */ struct stmpe_gpio_platform_data { int gpio_base; diff --git a/include/linux/mfd/tps65910.h b/include/linux/mfd/tps65910.h index 73572c65d04..82b4c8801a4 100644 --- a/include/linux/mfd/tps65910.h +++ b/include/linux/mfd/tps65910.h @@ -791,6 +791,7 @@ int tps65910_clear_bits(struct tps65910 *tps65910, u8 reg, u8 mask); void tps65910_gpio_init(struct tps65910 *tps65910, int gpio_base); int tps65910_irq_init(struct tps65910 *tps65910, int irq, struct tps65910_platform_data *pdata); +int tps65910_irq_exit(struct tps65910 *tps65910); static inline int tps65910_chip_id(struct tps65910 *tps65910) { diff --git a/include/linux/mfd/tps65912.h b/include/linux/mfd/tps65912.h new file mode 100644 index 00000000000..aaceab402ec --- /dev/null +++ b/include/linux/mfd/tps65912.h @@ -0,0 +1,327 @@ +/* + * tps65912.h -- TI TPS6591x + * + * Copyright 2011 Texas Instruments Inc. + * + * Author: Margarita Olaya <magi@slimlogic.co.uk> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#ifndef __LINUX_MFD_TPS65912_H +#define __LINUX_MFD_TPS65912_H + +/* TPS regulator type list */ +#define REGULATOR_LDO 0 +#define REGULATOR_DCDC 1 + +/* + * List of registers for TPS65912 + */ + +#define TPS65912_DCDC1_CTRL 0x00 +#define TPS65912_DCDC2_CTRL 0x01 +#define TPS65912_DCDC3_CTRL 0x02 +#define TPS65912_DCDC4_CTRL 0x03 +#define TPS65912_DCDC1_OP 0x04 +#define TPS65912_DCDC1_AVS 0x05 +#define TPS65912_DCDC1_LIMIT 0x06 +#define TPS65912_DCDC2_OP 0x07 +#define TPS65912_DCDC2_AVS 0x08 +#define TPS65912_DCDC2_LIMIT 0x09 +#define TPS65912_DCDC3_OP 0x0A +#define TPS65912_DCDC3_AVS 0x0B +#define TPS65912_DCDC3_LIMIT 0x0C +#define TPS65912_DCDC4_OP 0x0D +#define TPS65912_DCDC4_AVS 0x0E +#define TPS65912_DCDC4_LIMIT 0x0F +#define TPS65912_LDO1_OP 0x10 +#define TPS65912_LDO1_AVS 0x11 +#define TPS65912_LDO1_LIMIT 0x12 +#define TPS65912_LDO2_OP 0x13 +#define TPS65912_LDO2_AVS 0x14 +#define TPS65912_LDO2_LIMIT 0x15 +#define TPS65912_LDO3_OP 0x16 +#define TPS65912_LDO3_AVS 0x17 +#define TPS65912_LDO3_LIMIT 0x18 +#define TPS65912_LDO4_OP 0x19 +#define TPS65912_LDO4_AVS 0x1A +#define TPS65912_LDO4_LIMIT 0x1B +#define TPS65912_LDO5 0x1C +#define TPS65912_LDO6 0x1D +#define TPS65912_LDO7 0x1E +#define TPS65912_LDO8 0x1F +#define TPS65912_LDO9 0x20 +#define TPS65912_LDO10 0x21 +#define TPS65912_THRM 0x22 +#define TPS65912_CLK32OUT 0x23 +#define TPS65912_DEVCTRL 0x24 +#define TPS65912_DEVCTRL2 0x25 +#define TPS65912_I2C_SPI_CFG 0x26 +#define TPS65912_KEEP_ON 0x27 +#define TPS65912_KEEP_ON2 0x28 +#define TPS65912_SET_OFF1 0x29 +#define TPS65912_SET_OFF2 0x2A +#define TPS65912_DEF_VOLT 0x2B +#define TPS65912_DEF_VOLT_MAPPING 0x2C +#define TPS65912_DISCHARGE 0x2D +#define TPS65912_DISCHARGE2 0x2E +#define TPS65912_EN1_SET1 0x2F +#define TPS65912_EN1_SET2 0x30 +#define TPS65912_EN2_SET1 0x31 +#define TPS65912_EN2_SET2 0x32 +#define TPS65912_EN3_SET1 0x33 +#define TPS65912_EN3_SET2 0x34 +#define TPS65912_EN4_SET1 0x35 +#define TPS65912_EN4_SET2 0x36 +#define TPS65912_PGOOD 0x37 +#define TPS65912_PGOOD2 0x38 +#define TPS65912_INT_STS 0x39 +#define TPS65912_INT_MSK 0x3A +#define TPS65912_INT_STS2 0x3B +#define TPS65912_INT_MSK2 0x3C +#define TPS65912_INT_STS3 0x3D +#define TPS65912_INT_MSK3 0x3E +#define TPS65912_INT_STS4 0x3F +#define TPS65912_INT_MSK4 0x40 +#define TPS65912_GPIO1 0x41 +#define TPS65912_GPIO2 0x42 +#define TPS65912_GPIO3 0x43 +#define TPS65912_GPIO4 0x44 +#define TPS65912_GPIO5 0x45 +#define TPS65912_VMON 0x46 +#define TPS65912_LEDA_CTRL1 0x47 +#define TPS65912_LEDA_CTRL2 0x48 +#define TPS65912_LEDA_CTRL3 0x49 +#define TPS65912_LEDA_CTRL4 0x4A +#define TPS65912_LEDA_CTRL5 0x4B +#define TPS65912_LEDA_CTRL6 0x4C +#define TPS65912_LEDA_CTRL7 0x4D +#define TPS65912_LEDA_CTRL8 0x4E +#define TPS65912_LEDB_CTRL1 0x4F +#define TPS65912_LEDB_CTRL2 0x50 +#define TPS65912_LEDB_CTRL3 0x51 +#define TPS65912_LEDB_CTRL4 0x52 +#define TPS65912_LEDB_CTRL5 0x53 +#define TPS65912_LEDB_CTRL6 0x54 +#define TPS65912_LEDB_CTRL7 0x55 +#define TPS65912_LEDB_CTRL8 0x56 +#define TPS65912_LEDC_CTRL1 0x57 +#define TPS65912_LEDC_CTRL2 0x58 +#define TPS65912_LEDC_CTRL3 0x59 +#define TPS65912_LEDC_CTRL4 0x5A +#define TPS65912_LEDC_CTRL5 0x5B +#define TPS65912_LEDC_CTRL6 0x5C +#define TPS65912_LEDC_CTRL7 0x5D +#define TPS65912_LEDC_CTRL8 0x5E +#define TPS65912_LED_RAMP_UP_TIME 0x5F +#define TPS65912_LED_RAMP_DOWN_TIME 0x60 +#define TPS65912_LED_SEQ_EN 0x61 +#define TPS65912_LOADSWITCH 0x62 +#define TPS65912_SPARE 0x63 +#define TPS65912_VERNUM 0x64 +#define TPS6591X_MAX_REGISTER 0x64 + +/* IRQ Definitions */ +#define TPS65912_IRQ_PWRHOLD_F 0 +#define TPS65912_IRQ_VMON 1 +#define TPS65912_IRQ_PWRON 2 +#define TPS65912_IRQ_PWRON_LP 3 +#define TPS65912_IRQ_PWRHOLD_R 4 +#define TPS65912_IRQ_HOTDIE 5 +#define TPS65912_IRQ_GPIO1_R 6 +#define TPS65912_IRQ_GPIO1_F 7 +#define TPS65912_IRQ_GPIO2_R 8 +#define TPS65912_IRQ_GPIO2_F 9 +#define TPS65912_IRQ_GPIO3_R 10 +#define TPS65912_IRQ_GPIO3_F 11 +#define TPS65912_IRQ_GPIO4_R 12 +#define TPS65912_IRQ_GPIO4_F 13 +#define TPS65912_IRQ_GPIO5_R 14 +#define TPS65912_IRQ_GPIO5_F 15 +#define TPS65912_IRQ_PGOOD_DCDC1 16 +#define TPS65912_IRQ_PGOOD_DCDC2 17 +#define TPS65912_IRQ_PGOOD_DCDC3 18 +#define TPS65912_IRQ_PGOOD_DCDC4 19 +#define TPS65912_IRQ_PGOOD_LDO1 20 +#define TPS65912_IRQ_PGOOD_LDO2 21 +#define TPS65912_IRQ_PGOOD_LDO3 22 +#define TPS65912_IRQ_PGOOD_LDO4 23 +#define TPS65912_IRQ_PGOOD_LDO5 24 +#define TPS65912_IRQ_PGOOD_LDO6 25 +#define TPS65912_IRQ_PGOOD_LDO7 26 +#define TPS65912_IRQ_PGOOD_LD08 27 +#define TPS65912_IRQ_PGOOD_LDO9 28 +#define TPS65912_IRQ_PGOOD_LDO10 29 + +#define TPS65912_NUM_IRQ 30 + +/* GPIO 1 and 2 Register Definitions */ +#define GPIO_SLEEP_MASK 0x80 +#define GPIO_SLEEP_SHIFT 7 +#define GPIO_DEB_MASK 0x10 +#define GPIO_DEB_SHIFT 4 +#define GPIO_CFG_MASK 0x04 +#define GPIO_CFG_SHIFT 2 +#define GPIO_STS_MASK 0x02 +#define GPIO_STS_SHIFT 1 +#define GPIO_SET_MASK 0x01 +#define GPIO_SET_SHIFT 0 + +/* GPIO 3 Register Definitions */ +#define GPIO3_SLEEP_MASK 0x80 +#define GPIO3_SLEEP_SHIFT 7 +#define GPIO3_SEL_MASK 0x40 +#define GPIO3_SEL_SHIFT 6 +#define GPIO3_ODEN_MASK 0x20 +#define GPIO3_ODEN_SHIFT 5 +#define GPIO3_DEB_MASK 0x10 +#define GPIO3_DEB_SHIFT 4 +#define GPIO3_PDEN_MASK 0x08 +#define GPIO3_PDEN_SHIFT 3 +#define GPIO3_CFG_MASK 0x04 +#define GPIO3_CFG_SHIFT 2 +#define GPIO3_STS_MASK 0x02 +#define GPIO3_STS_SHIFT 1 +#define GPIO3_SET_MASK 0x01 +#define GPIO3_SET_SHIFT 0 + +/* GPIO 4 Register Definitions */ +#define GPIO4_SLEEP_MASK 0x80 +#define GPIO4_SLEEP_SHIFT 7 +#define GPIO4_SEL_MASK 0x40 +#define GPIO4_SEL_SHIFT 6 +#define GPIO4_ODEN_MASK 0x20 +#define GPIO4_ODEN_SHIFT 5 +#define GPIO4_DEB_MASK 0x10 +#define GPIO4_DEB_SHIFT 4 +#define GPIO4_PDEN_MASK 0x08 +#define GPIO4_PDEN_SHIFT 3 +#define GPIO4_CFG_MASK 0x04 +#define GPIO4_CFG_SHIFT 2 +#define GPIO4_STS_MASK 0x02 +#define GPIO4_STS_SHIFT 1 +#define GPIO4_SET_MASK 0x01 +#define GPIO4_SET_SHIFT 0 + +/* Register THERM (0x80) register.RegisterDescription */ +#define THERM_THERM_HD_MASK 0x20 +#define THERM_THERM_HD_SHIFT 5 +#define THERM_THERM_TS_MASK 0x10 +#define THERM_THERM_TS_SHIFT 4 +#define THERM_THERM_HDSEL_MASK 0x0C +#define THERM_THERM_HDSEL_SHIFT 2 +#define THERM_RSVD1_MASK 0x02 +#define THERM_RSVD1_SHIFT 1 +#define THERM_THERM_STATE_MASK 0x01 +#define THERM_THERM_STATE_SHIFT 0 + +/* Register DCDCCTRL1 register.RegisterDescription */ +#define DCDCCTRL_VCON_ENABLE_MASK 0x80 +#define DCDCCTRL_VCON_ENABLE_SHIFT 7 +#define DCDCCTRL_VCON_RANGE1_MASK 0x40 +#define DCDCCTRL_VCON_RANGE1_SHIFT 6 +#define DCDCCTRL_VCON_RANGE0_MASK 0x20 +#define DCDCCTRL_VCON_RANGE0_SHIFT 5 +#define DCDCCTRL_TSTEP2_MASK 0x10 +#define DCDCCTRL_TSTEP2_SHIFT 4 +#define DCDCCTRL_TSTEP1_MASK 0x08 +#define DCDCCTRL_TSTEP1_SHIFT 3 +#define DCDCCTRL_TSTEP0_MASK 0x04 +#define DCDCCTRL_TSTEP0_SHIFT 2 +#define DCDCCTRL_DCDC1_MODE_MASK 0x02 +#define DCDCCTRL_DCDC1_MODE_SHIFT 1 + +/* Register DCDCCTRL2 and DCDCCTRL3 register.RegisterDescription */ +#define DCDCCTRL_TSTEP2_MASK 0x10 +#define DCDCCTRL_TSTEP2_SHIFT 4 +#define DCDCCTRL_TSTEP1_MASK 0x08 +#define DCDCCTRL_TSTEP1_SHIFT 3 +#define DCDCCTRL_TSTEP0_MASK 0x04 +#define DCDCCTRL_TSTEP0_SHIFT 2 +#define DCDCCTRL_DCDC_MODE_MASK 0x02 +#define DCDCCTRL_DCDC_MODE_SHIFT 1 +#define DCDCCTRL_RSVD0_MASK 0x01 +#define DCDCCTRL_RSVD0_SHIFT 0 + +/* Register DCDCCTRL4 register.RegisterDescription */ +#define DCDCCTRL_RAMP_TIME_MASK 0x01 +#define DCDCCTRL_RAMP_TIME_SHIFT 0 + +/* Register DCDCx_AVS */ +#define DCDC_AVS_ENABLE_MASK 0x80 +#define DCDC_AVS_ENABLE_SHIFT 7 +#define DCDC_AVS_ECO_MASK 0x40 +#define DCDC_AVS_ECO_SHIFT 6 + +/* Register DCDCx_LIMIT */ +#define DCDC_LIMIT_RANGE_MASK 0xC0 +#define DCDC_LIMIT_RANGE_SHIFT 6 +#define DCDC_LIMIT_MAX_SEL_MASK 0x3F +#define DCDC_LIMIT_MAX_SEL_SHIFT 0 + +/** + * struct tps65912_board + * Board platform dat may be used to initialize regulators. + */ +struct tps65912_board { + int is_dcdc1_avs; + int is_dcdc2_avs; + int is_dcdc3_avs; + int is_dcdc4_avs; + int irq; + int irq_base; + int gpio_base; + struct regulator_init_data *tps65912_pmic_init_data; +}; + +/** + * struct tps65912 - tps65912 sub-driver chip access routines + */ + +struct tps65912 { + struct device *dev; + /* for read/write acces */ + struct mutex io_mutex; + + /* For device IO interfaces: I2C or SPI */ + void *control_data; + + int (*read)(struct tps65912 *tps65912, u8 reg, int size, void *dest); + int (*write)(struct tps65912 *tps65912, u8 reg, int size, void *src); + + /* Client devices */ + struct tps65912_pmic *pmic; + + /* GPIO Handling */ + struct gpio_chip gpio; + + /* IRQ Handling */ + struct mutex irq_lock; + int chip_irq; + int irq_base; + int irq_num; + u32 irq_mask; +}; + +struct tps65912_platform_data { + int irq; + int irq_base; +}; + +unsigned int tps_chip(void); + +int tps65912_set_bits(struct tps65912 *tps65912, u8 reg, u8 mask); +int tps65912_clear_bits(struct tps65912 *tps65912, u8 reg, u8 mask); +int tps65912_reg_read(struct tps65912 *tps65912, u8 reg); +int tps65912_reg_write(struct tps65912 *tps65912, u8 reg, u8 val); +int tps65912_device_init(struct tps65912 *tps65912); +void tps65912_device_exit(struct tps65912 *tps65912); +int tps65912_irq_init(struct tps65912 *tps65912, int irq, + struct tps65912_platform_data *pdata); + +#endif /* __LINUX_MFD_TPS65912_H */ diff --git a/include/linux/mfd/wm831x/core.h b/include/linux/mfd/wm831x/core.h index 0d515ee1c24..8dda8ded5cd 100644 --- a/include/linux/mfd/wm831x/core.h +++ b/include/linux/mfd/wm831x/core.h @@ -17,6 +17,7 @@ #include <linux/completion.h> #include <linux/interrupt.h> +#include <linux/list.h> /* * Register values. @@ -234,9 +235,111 @@ #define WM831X_ON_PIN_TO_SHIFT 0 /* ON_PIN_TO - [1:0] */ #define WM831X_ON_PIN_TO_WIDTH 2 /* ON_PIN_TO - [1:0] */ +/* + * R16528 (0x4090) - Clock Control 1 + */ +#define WM831X_CLKOUT_ENA 0x8000 /* CLKOUT_ENA */ +#define WM831X_CLKOUT_ENA_MASK 0x8000 /* CLKOUT_ENA */ +#define WM831X_CLKOUT_ENA_SHIFT 15 /* CLKOUT_ENA */ +#define WM831X_CLKOUT_ENA_WIDTH 1 /* CLKOUT_ENA */ +#define WM831X_CLKOUT_OD 0x2000 /* CLKOUT_OD */ +#define WM831X_CLKOUT_OD_MASK 0x2000 /* CLKOUT_OD */ +#define WM831X_CLKOUT_OD_SHIFT 13 /* CLKOUT_OD */ +#define WM831X_CLKOUT_OD_WIDTH 1 /* CLKOUT_OD */ +#define WM831X_CLKOUT_SLOT_MASK 0x0700 /* CLKOUT_SLOT - [10:8] */ +#define WM831X_CLKOUT_SLOT_SHIFT 8 /* CLKOUT_SLOT - [10:8] */ +#define WM831X_CLKOUT_SLOT_WIDTH 3 /* CLKOUT_SLOT - [10:8] */ +#define WM831X_CLKOUT_SLPSLOT_MASK 0x0070 /* CLKOUT_SLPSLOT - [6:4] */ +#define WM831X_CLKOUT_SLPSLOT_SHIFT 4 /* CLKOUT_SLPSLOT - [6:4] */ +#define WM831X_CLKOUT_SLPSLOT_WIDTH 3 /* CLKOUT_SLPSLOT - [6:4] */ +#define WM831X_CLKOUT_SRC 0x0001 /* CLKOUT_SRC */ +#define WM831X_CLKOUT_SRC_MASK 0x0001 /* CLKOUT_SRC */ +#define WM831X_CLKOUT_SRC_SHIFT 0 /* CLKOUT_SRC */ +#define WM831X_CLKOUT_SRC_WIDTH 1 /* CLKOUT_SRC */ + +/* + * R16529 (0x4091) - Clock Control 2 + */ +#define WM831X_XTAL_INH 0x8000 /* XTAL_INH */ +#define WM831X_XTAL_INH_MASK 0x8000 /* XTAL_INH */ +#define WM831X_XTAL_INH_SHIFT 15 /* XTAL_INH */ +#define WM831X_XTAL_INH_WIDTH 1 /* XTAL_INH */ +#define WM831X_XTAL_ENA 0x2000 /* XTAL_ENA */ +#define WM831X_XTAL_ENA_MASK 0x2000 /* XTAL_ENA */ +#define WM831X_XTAL_ENA_SHIFT 13 /* XTAL_ENA */ +#define WM831X_XTAL_ENA_WIDTH 1 /* XTAL_ENA */ +#define WM831X_XTAL_BKUPENA 0x1000 /* XTAL_BKUPENA */ +#define WM831X_XTAL_BKUPENA_MASK 0x1000 /* XTAL_BKUPENA */ +#define WM831X_XTAL_BKUPENA_SHIFT 12 /* XTAL_BKUPENA */ +#define WM831X_XTAL_BKUPENA_WIDTH 1 /* XTAL_BKUPENA */ +#define WM831X_FLL_AUTO 0x0080 /* FLL_AUTO */ +#define WM831X_FLL_AUTO_MASK 0x0080 /* FLL_AUTO */ +#define WM831X_FLL_AUTO_SHIFT 7 /* FLL_AUTO */ +#define WM831X_FLL_AUTO_WIDTH 1 /* FLL_AUTO */ +#define WM831X_FLL_AUTO_FREQ_MASK 0x0007 /* FLL_AUTO_FREQ - [2:0] */ +#define WM831X_FLL_AUTO_FREQ_SHIFT 0 /* FLL_AUTO_FREQ - [2:0] */ +#define WM831X_FLL_AUTO_FREQ_WIDTH 3 /* FLL_AUTO_FREQ - [2:0] */ + +/* + * R16530 (0x4092) - FLL Control 1 + */ +#define WM831X_FLL_FRAC 0x0004 /* FLL_FRAC */ +#define WM831X_FLL_FRAC_MASK 0x0004 /* FLL_FRAC */ +#define WM831X_FLL_FRAC_SHIFT 2 /* FLL_FRAC */ +#define WM831X_FLL_FRAC_WIDTH 1 /* FLL_FRAC */ +#define WM831X_FLL_OSC_ENA 0x0002 /* FLL_OSC_ENA */ +#define WM831X_FLL_OSC_ENA_MASK 0x0002 /* FLL_OSC_ENA */ +#define WM831X_FLL_OSC_ENA_SHIFT 1 /* FLL_OSC_ENA */ +#define WM831X_FLL_OSC_ENA_WIDTH 1 /* FLL_OSC_ENA */ +#define WM831X_FLL_ENA 0x0001 /* FLL_ENA */ +#define WM831X_FLL_ENA_MASK 0x0001 /* FLL_ENA */ +#define WM831X_FLL_ENA_SHIFT 0 /* FLL_ENA */ +#define WM831X_FLL_ENA_WIDTH 1 /* FLL_ENA */ + +/* + * R16531 (0x4093) - FLL Control 2 + */ +#define WM831X_FLL_OUTDIV_MASK 0x3F00 /* FLL_OUTDIV - [13:8] */ +#define WM831X_FLL_OUTDIV_SHIFT 8 /* FLL_OUTDIV - [13:8] */ +#define WM831X_FLL_OUTDIV_WIDTH 6 /* FLL_OUTDIV - [13:8] */ +#define WM831X_FLL_CTRL_RATE_MASK 0x0070 /* FLL_CTRL_RATE - [6:4] */ +#define WM831X_FLL_CTRL_RATE_SHIFT 4 /* FLL_CTRL_RATE - [6:4] */ +#define WM831X_FLL_CTRL_RATE_WIDTH 3 /* FLL_CTRL_RATE - [6:4] */ +#define WM831X_FLL_FRATIO_MASK 0x0007 /* FLL_FRATIO - [2:0] */ +#define WM831X_FLL_FRATIO_SHIFT 0 /* FLL_FRATIO - [2:0] */ +#define WM831X_FLL_FRATIO_WIDTH 3 /* FLL_FRATIO - [2:0] */ + +/* + * R16532 (0x4094) - FLL Control 3 + */ +#define WM831X_FLL_K_MASK 0xFFFF /* FLL_K - [15:0] */ +#define WM831X_FLL_K_SHIFT 0 /* FLL_K - [15:0] */ +#define WM831X_FLL_K_WIDTH 16 /* FLL_K - [15:0] */ + +/* + * R16533 (0x4095) - FLL Control 4 + */ +#define WM831X_FLL_N_MASK 0x7FE0 /* FLL_N - [14:5] */ +#define WM831X_FLL_N_SHIFT 5 /* FLL_N - [14:5] */ +#define WM831X_FLL_N_WIDTH 10 /* FLL_N - [14:5] */ +#define WM831X_FLL_GAIN_MASK 0x000F /* FLL_GAIN - [3:0] */ +#define WM831X_FLL_GAIN_SHIFT 0 /* FLL_GAIN - [3:0] */ +#define WM831X_FLL_GAIN_WIDTH 4 /* FLL_GAIN - [3:0] */ + +/* + * R16534 (0x4096) - FLL Control 5 + */ +#define WM831X_FLL_CLK_REF_DIV_MASK 0x0018 /* FLL_CLK_REF_DIV - [4:3] */ +#define WM831X_FLL_CLK_REF_DIV_SHIFT 3 /* FLL_CLK_REF_DIV - [4:3] */ +#define WM831X_FLL_CLK_REF_DIV_WIDTH 2 /* FLL_CLK_REF_DIV - [4:3] */ +#define WM831X_FLL_CLK_SRC_MASK 0x0003 /* FLL_CLK_SRC - [1:0] */ +#define WM831X_FLL_CLK_SRC_SHIFT 0 /* FLL_CLK_SRC - [1:0] */ +#define WM831X_FLL_CLK_SRC_WIDTH 2 /* FLL_CLK_SRC - [1:0] */ + struct regulator_dev; #define WM831X_NUM_IRQ_REGS 5 +#define WM831X_NUM_GPIO_REGS 16 enum wm831x_parent { WM8310 = 0x8310, @@ -248,6 +351,12 @@ enum wm831x_parent { WM8326 = 0x8326, }; +struct wm831x; +enum wm831x_auxadc; + +typedef int (*wm831x_auxadc_read_fn)(struct wm831x *wm831x, + enum wm831x_auxadc input); + struct wm831x { struct mutex io_lock; @@ -261,7 +370,7 @@ struct wm831x { int irq; /* Our chip IRQ */ struct mutex irq_lock; - unsigned int irq_base; + int irq_base; int irq_masks_cur[WM831X_NUM_IRQ_REGS]; /* Currently active value */ int irq_masks_cache[WM831X_NUM_IRQ_REGS]; /* Cached hardware value */ @@ -272,8 +381,13 @@ struct wm831x { int num_gpio; + /* Used by the interrupt controller code to post writes */ + int gpio_update[WM831X_NUM_GPIO_REGS]; + struct mutex auxadc_lock; - struct completion auxadc_done; + struct list_head auxadc_pending; + u16 auxadc_active; + wm831x_auxadc_read_fn auxadc_read; /* The WM831x has a security key blocking access to certain * registers. The mutex is taken by the accessors for locking @@ -300,5 +414,6 @@ void wm831x_device_exit(struct wm831x *wm831x); int wm831x_device_suspend(struct wm831x *wm831x); int wm831x_irq_init(struct wm831x *wm831x, int irq); void wm831x_irq_exit(struct wm831x *wm831x); +void wm831x_auxadc_init(struct wm831x *wm831x); #endif diff --git a/include/linux/mfd/wm831x/pdata.h b/include/linux/mfd/wm831x/pdata.h index ff42d700293..0ba24599fe5 100644 --- a/include/linux/mfd/wm831x/pdata.h +++ b/include/linux/mfd/wm831x/pdata.h @@ -120,6 +120,9 @@ struct wm831x_pdata { /** Put the /IRQ line into CMOS mode */ bool irq_cmos; + /** Disable the touchscreen */ + bool disable_touch; + int irq_base; int gpio_base; int gpio_defaults[WM831X_GPIO_NUM]; diff --git a/include/linux/mm.h b/include/linux/mm.h index 3172a1c0f08..f2690cf4982 100644 --- a/include/linux/mm.h +++ b/include/linux/mm.h @@ -1600,6 +1600,7 @@ enum mf_flags { }; extern void memory_failure(unsigned long pfn, int trapno); extern int __memory_failure(unsigned long pfn, int trapno, int flags); +extern void memory_failure_queue(unsigned long pfn, int trapno, int flags); extern int unpoison_memory(unsigned long pfn); extern int sysctl_memory_failure_early_kill; extern int sysctl_memory_failure_recovery; diff --git a/include/linux/mm_types.h b/include/linux/mm_types.h index 027935c86c6..774b8952deb 100644 --- a/include/linux/mm_types.h +++ b/include/linux/mm_types.h @@ -30,23 +30,61 @@ struct address_space; * moment. Note that we have no way to track which tasks are using * a page, though if it is a pagecache page, rmap structures can tell us * who is mapping it. + * + * The objects in struct page are organized in double word blocks in + * order to allows us to use atomic double word operations on portions + * of struct page. That is currently only used by slub but the arrangement + * allows the use of atomic double word operations on the flags/mapping + * and lru list pointers also. */ struct page { + /* First double word block */ unsigned long flags; /* Atomic flags, some possibly * updated asynchronously */ - atomic_t _count; /* Usage count, see below. */ - union { - atomic_t _mapcount; /* Count of ptes mapped in mms, - * to show when page is mapped - * & limit reverse map searches. + struct address_space *mapping; /* If low bit clear, points to + * inode address_space, or NULL. + * If page mapped as anonymous + * memory, low bit is set, and + * it points to anon_vma object: + * see PAGE_MAPPING_ANON below. */ - struct { /* SLUB */ - u16 inuse; - u16 objects; + /* Second double word */ + struct { + union { + pgoff_t index; /* Our offset within mapping. */ + void *freelist; /* slub first free object */ + }; + + union { + /* Used for cmpxchg_double in slub */ + unsigned long counters; + + struct { + + union { + atomic_t _mapcount; /* Count of ptes mapped in mms, + * to show when page is mapped + * & limit reverse map searches. + */ + + struct { + unsigned inuse:16; + unsigned objects:15; + unsigned frozen:1; + }; + }; + atomic_t _count; /* Usage count, see below. */ + }; }; }; + + /* Third double word block */ + struct list_head lru; /* Pageout list, eg. active_list + * protected by zone->lru_lock ! + */ + + /* Remainder is not double word aligned */ union { - struct { unsigned long private; /* Mapping-private opaque data: * usually used for buffer_heads * if PagePrivate set; used for @@ -54,27 +92,13 @@ struct page { * indicates order in the buddy * system if PG_buddy is set. */ - struct address_space *mapping; /* If low bit clear, points to - * inode address_space, or NULL. - * If page mapped as anonymous - * memory, low bit is set, and - * it points to anon_vma object: - * see PAGE_MAPPING_ANON below. - */ - }; #if USE_SPLIT_PTLOCKS - spinlock_t ptl; + spinlock_t ptl; #endif - struct kmem_cache *slab; /* SLUB: Pointer to slab */ - struct page *first_page; /* Compound tail pages */ - }; - union { - pgoff_t index; /* Our offset within mapping. */ - void *freelist; /* SLUB: freelist req. slab lock */ + struct kmem_cache *slab; /* SLUB: Pointer to slab */ + struct page *first_page; /* Compound tail pages */ }; - struct list_head lru; /* Pageout list, eg. active_list - * protected by zone->lru_lock ! - */ + /* * On machines where all RAM is mapped into kernel address space, * we can simply calculate the virtual address. On machines with @@ -100,7 +124,16 @@ struct page { */ void *shadow; #endif -}; +} +/* + * If another subsystem starts using the double word pairing for atomic + * operations on struct page then it must change the #if to ensure + * proper alignment of the page struct. + */ +#if defined(CONFIG_SLUB) && defined(CONFIG_CMPXCHG_LOCAL) + __attribute__((__aligned__(2*sizeof(unsigned long)))) +#endif +; typedef unsigned long __nocast vm_flags_t; diff --git a/include/linux/nfs.h b/include/linux/nfs.h index f387919bbc5..8c6ee44914c 100644 --- a/include/linux/nfs.h +++ b/include/linux/nfs.h @@ -29,6 +29,8 @@ #define NFS_MNT_VERSION 1 #define NFS_MNT3_VERSION 3 +#define NFS_PIPE_DIRNAME "/nfs" + /* * NFS stats. The good thing with these values is that NFSv3 errors are * a superset of NFSv2 errors (with the exception of NFSERR_WFLUSH which diff --git a/include/linux/nfs4.h b/include/linux/nfs4.h index a3c4bc800dc..76f99e8714f 100644 --- a/include/linux/nfs4.h +++ b/include/linux/nfs4.h @@ -566,6 +566,7 @@ enum { NFSPROC4_CLNT_SECINFO_NO_NAME, NFSPROC4_CLNT_TEST_STATEID, NFSPROC4_CLNT_FREE_STATEID, + NFSPROC4_CLNT_GETDEVICELIST, }; /* nfs41 types */ diff --git a/include/linux/nfs_fs.h b/include/linux/nfs_fs.h index 8b579beb635..eaac770f886 100644 --- a/include/linux/nfs_fs.h +++ b/include/linux/nfs_fs.h @@ -99,9 +99,10 @@ struct nfs_open_context { struct nfs_open_dir_context { struct rpc_cred *cred; + unsigned long attr_gencount; __u64 dir_cookie; __u64 dup_cookie; - int duped; + signed char duped; }; /* @@ -568,12 +569,12 @@ extern struct posix_acl *nfs3_proc_getacl(struct inode *inode, int type); extern int nfs3_proc_setacl(struct inode *inode, int type, struct posix_acl *acl); extern int nfs3_proc_set_default_acl(struct inode *dir, struct inode *inode, - mode_t mode); + umode_t mode); extern void nfs3_forget_cached_acls(struct inode *inode); #else static inline int nfs3_proc_set_default_acl(struct inode *dir, struct inode *inode, - mode_t mode) + umode_t mode) { return 0; } diff --git a/include/linux/nfs_fs_sb.h b/include/linux/nfs_fs_sb.h index 50a661f8b45..b5479df8378 100644 --- a/include/linux/nfs_fs_sb.h +++ b/include/linux/nfs_fs_sb.h @@ -131,8 +131,9 @@ struct nfs_server { struct fscache_cookie *fscache; /* superblock cookie */ #endif + u32 pnfs_blksize; /* layout_blksize attr */ #ifdef CONFIG_NFS_V4 - u32 attr_bitmask[2];/* V4 bitmask representing the set + u32 attr_bitmask[3];/* V4 bitmask representing the set of attributes supported on this filesystem */ u32 cache_consistency_bitmask[2]; @@ -145,6 +146,7 @@ struct nfs_server { filesystem */ struct pnfs_layoutdriver_type *pnfs_curr_ld; /* Active layout driver */ struct rpc_wait_queue roc_rpcwaitq; + void *pnfs_ld_data; /* per mount point data */ /* the following fields are protected by nfs_client->cl_lock */ struct rb_root state_owners; diff --git a/include/linux/nfs_xdr.h b/include/linux/nfs_xdr.h index 5b115956aba..569ea5b76fd 100644 --- a/include/linux/nfs_xdr.h +++ b/include/linux/nfs_xdr.h @@ -122,6 +122,7 @@ struct nfs_fsinfo { struct timespec time_delta; /* server time granularity */ __u32 lease_time; /* in seconds */ __u32 layouttype; /* supported pnfs layout driver */ + __u32 blksize; /* preferred pnfs io block size */ }; struct nfs_fsstat { @@ -235,6 +236,17 @@ struct nfs4_layoutget { gfp_t gfp_flags; }; +struct nfs4_getdevicelist_args { + const struct nfs_fh *fh; + u32 layoutclass; + struct nfs4_sequence_args seq_args; +}; + +struct nfs4_getdevicelist_res { + struct pnfs_devicelist *devlist; + struct nfs4_sequence_res seq_res; +}; + struct nfs4_getdeviceinfo_args { struct pnfs_device *pdev; struct nfs4_sequence_args seq_args; @@ -257,12 +269,13 @@ struct nfs4_layoutcommit_res { struct nfs_fattr *fattr; const struct nfs_server *server; struct nfs4_sequence_res seq_res; + int status; }; struct nfs4_layoutcommit_data { struct rpc_task task; struct nfs_fattr fattr; - struct pnfs_layout_segment *lseg; + struct list_head lseg_list; struct rpc_cred *cred; struct nfs4_layoutcommit_args args; struct nfs4_layoutcommit_res res; @@ -943,7 +956,7 @@ struct nfs4_server_caps_arg { }; struct nfs4_server_caps_res { - u32 attr_bitmask[2]; + u32 attr_bitmask[3]; u32 acl_bitmask; u32 has_links; u32 has_symlinks; diff --git a/include/linux/of.h b/include/linux/of.h index bd716f8908d..0085bb01c04 100644 --- a/include/linux/of.h +++ b/include/linux/of.h @@ -196,12 +196,13 @@ extern struct property *of_find_property(const struct device_node *np, const char *name, int *lenp); extern int of_property_read_u32_array(const struct device_node *np, - char *propname, + const char *propname, u32 *out_values, size_t sz); -extern int of_property_read_string(struct device_node *np, char *propname, - const char **out_string); +extern int of_property_read_string(struct device_node *np, + const char *propname, + const char **out_string); extern int of_device_is_compatible(const struct device_node *device, const char *); extern int of_device_is_available(const struct device_node *device); @@ -242,13 +243,15 @@ static inline bool of_have_populated_dt(void) } static inline int of_property_read_u32_array(const struct device_node *np, - char *propname, u32 *out_values, size_t sz) + const char *propname, + u32 *out_values, size_t sz) { return -ENOSYS; } static inline int of_property_read_string(struct device_node *np, - char *propname, const char **out_string) + const char *propname, + const char **out_string) { return -ENOSYS; } @@ -256,7 +259,7 @@ static inline int of_property_read_string(struct device_node *np, #endif /* CONFIG_OF */ static inline int of_property_read_u32(const struct device_node *np, - char *propname, + const char *propname, u32 *out_value) { return of_property_read_u32_array(np, propname, out_value, 1); diff --git a/include/linux/of_gpio.h b/include/linux/of_gpio.h index aec8025c786..52280a2b5e6 100644 --- a/include/linux/of_gpio.h +++ b/include/linux/of_gpio.h @@ -57,6 +57,8 @@ extern int of_mm_gpiochip_add(struct device_node *np, extern void of_gpiochip_add(struct gpio_chip *gc); extern void of_gpiochip_remove(struct gpio_chip *gc); extern struct gpio_chip *of_node_to_gpiochip(struct device_node *np); +extern int of_gpio_simple_xlate(struct gpio_chip *gc, struct device_node *np, + const void *gpio_spec, u32 *flags); #else /* CONFIG_OF_GPIO */ @@ -72,6 +74,13 @@ static inline unsigned int of_gpio_count(struct device_node *np) return 0; } +static inline int of_gpio_simple_xlate(struct gpio_chip *gc, + struct device_node *np, + const void *gpio_spec, u32 *flags) +{ + return -ENOSYS; +} + static inline void of_gpiochip_add(struct gpio_chip *gc) { } static inline void of_gpiochip_remove(struct gpio_chip *gc) { } diff --git a/include/linux/of_irq.h b/include/linux/of_irq.h index e6955f5d1f0..cd2e61ce4e8 100644 --- a/include/linux/of_irq.h +++ b/include/linux/of_irq.h @@ -63,6 +63,9 @@ extern int of_irq_map_one(struct device_node *device, int index, extern unsigned int irq_create_of_mapping(struct device_node *controller, const u32 *intspec, unsigned int intsize); +#ifdef CONFIG_IRQ_DOMAIN +extern void irq_dispose_mapping(unsigned int irq); +#endif extern int of_irq_to_resource(struct device_node *dev, int index, struct resource *r); extern int of_irq_count(struct device_node *dev); @@ -70,6 +73,7 @@ extern int of_irq_to_resource_table(struct device_node *dev, struct resource *res, int nr_irqs); extern struct device_node *of_irq_find_parent(struct device_node *child); + #endif /* CONFIG_OF_IRQ */ #endif /* CONFIG_OF */ #endif /* __OF_IRQ_H */ diff --git a/include/linux/of_net.h b/include/linux/of_net.h index e913081fb52..f4746418871 100644 --- a/include/linux/of_net.h +++ b/include/linux/of_net.h @@ -9,6 +9,7 @@ #ifdef CONFIG_OF_NET #include <linux/of.h> +extern const int of_get_phy_mode(struct device_node *np); extern const void *of_get_mac_address(struct device_node *np); #endif diff --git a/include/linux/page-flags.h b/include/linux/page-flags.h index 3e5a1b189a4..e90a673be67 100644 --- a/include/linux/page-flags.h +++ b/include/linux/page-flags.h @@ -124,9 +124,6 @@ enum pageflags { /* SLOB */ PG_slob_free = PG_private, - - /* SLUB */ - PG_slub_frozen = PG_active, }; #ifndef __GENERATING_BOUNDS_H @@ -212,8 +209,6 @@ PAGEFLAG(SwapBacked, swapbacked) __CLEARPAGEFLAG(SwapBacked, swapbacked) __PAGEFLAG(SlobFree, slob_free) -__PAGEFLAG(SlubFrozen, slub_frozen) - /* * Private page markings that may be used by the filesystem that owns the page * for its own purposes. diff --git a/include/linux/pci.h b/include/linux/pci.h index 3a5626df37c..f27893b3b72 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -843,8 +843,8 @@ void pci_enable_ido(struct pci_dev *dev, unsigned long type); void pci_disable_ido(struct pci_dev *dev, unsigned long type); enum pci_obff_signal_type { - PCI_EXP_OBFF_SIGNAL_L0, - PCI_EXP_OBFF_SIGNAL_ALWAYS, + PCI_EXP_OBFF_SIGNAL_L0 = 0, + PCI_EXP_OBFF_SIGNAL_ALWAYS = 1, }; int pci_enable_obff(struct pci_dev *dev, enum pci_obff_signal_type); void pci_disable_obff(struct pci_dev *dev); @@ -879,7 +879,7 @@ void pdev_enable_device(struct pci_dev *); void pdev_sort_resources(struct pci_dev *, struct resource_list *); int pci_enable_resources(struct pci_dev *, int mask); void pci_fixup_irqs(u8 (*)(struct pci_dev *, u8 *), - int (*)(struct pci_dev *, u8, u8)); + int (*)(const struct pci_dev *, u8, u8)); #define HAVE_PCI_REQ_REGIONS 2 int __must_check pci_request_regions(struct pci_dev *, const char *); int __must_check pci_request_regions_exclusive(struct pci_dev *, const char *); diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index b00c4ec5056..ae96bbe5451 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -2709,6 +2709,16 @@ #define PCI_DEVICE_ID_INTEL_ICH10_5 0x3a60 #define PCI_DEVICE_ID_INTEL_5_3400_SERIES_LPC_MIN 0x3b00 #define PCI_DEVICE_ID_INTEL_5_3400_SERIES_LPC_MAX 0x3b1f +#define PCI_DEVICE_ID_INTEL_IOAT_SNB0 0x3c20 +#define PCI_DEVICE_ID_INTEL_IOAT_SNB1 0x3c21 +#define PCI_DEVICE_ID_INTEL_IOAT_SNB2 0x3c22 +#define PCI_DEVICE_ID_INTEL_IOAT_SNB3 0x3c23 +#define PCI_DEVICE_ID_INTEL_IOAT_SNB4 0x3c24 +#define PCI_DEVICE_ID_INTEL_IOAT_SNB5 0x3c25 +#define PCI_DEVICE_ID_INTEL_IOAT_SNB6 0x3c26 +#define PCI_DEVICE_ID_INTEL_IOAT_SNB7 0x3c27 +#define PCI_DEVICE_ID_INTEL_IOAT_SNB8 0x3c2e +#define PCI_DEVICE_ID_INTEL_IOAT_SNB9 0x3c2f #define PCI_DEVICE_ID_INTEL_IOAT_SNB 0x402f #define PCI_DEVICE_ID_INTEL_5100_16 0x65f0 #define PCI_DEVICE_ID_INTEL_5100_21 0x65f5 diff --git a/include/linux/phy.h b/include/linux/phy.h index ad5186354d9..54fc4138955 100644 --- a/include/linux/phy.h +++ b/include/linux/phy.h @@ -53,6 +53,7 @@ /* Interface Mode definitions */ typedef enum { + PHY_INTERFACE_MODE_NA, PHY_INTERFACE_MODE_MII, PHY_INTERFACE_MODE_GMII, PHY_INTERFACE_MODE_SGMII, @@ -62,7 +63,8 @@ typedef enum { PHY_INTERFACE_MODE_RGMII_ID, PHY_INTERFACE_MODE_RGMII_RXID, PHY_INTERFACE_MODE_RGMII_TXID, - PHY_INTERFACE_MODE_RTBI + PHY_INTERFACE_MODE_RTBI, + PHY_INTERFACE_MODE_SMII, } phy_interface_t; diff --git a/include/linux/platform_data/ntc_thermistor.h b/include/linux/platform_data/ntc_thermistor.h new file mode 100644 index 00000000000..abd28621527 --- /dev/null +++ b/include/linux/platform_data/ntc_thermistor.h @@ -0,0 +1,53 @@ +/* + * ntc_thermistor.h - NTC Thermistors + * + * Copyright (C) 2010 Samsung Electronics + * MyungJoo Ham <myungjoo.ham@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef _LINUX_NTC_H +#define _LINUX_NTC_H + +enum ntc_thermistor_type { + TYPE_NCPXXWB473, + TYPE_NCPXXWL333, +}; + +struct ntc_thermistor_platform_data { + /* + * One (not both) of read_uV and read_ohm should be provided and only + * one of the two should be provided. + * Both functions should return negative value for an error case. + * + * pullup_uV, pullup_ohm, pulldown_ohm, and connect are required to use + * read_uV() + * + * How to setup pullup_ohm, pulldown_ohm, and connect is + * described at Documentation/hwmon/ntc + * + * pullup/down_ohm: 0 for infinite / not-connected + */ + int (*read_uV)(void); + unsigned int pullup_uV; + + unsigned int pullup_ohm; + unsigned int pulldown_ohm; + enum { NTC_CONNECTED_POSITIVE, NTC_CONNECTED_GROUND } connect; + + int (*read_ohm)(void); +}; + +#endif /* _LINUX_NTC_H */ diff --git a/include/linux/posix_acl.h b/include/linux/posix_acl.h index 9a53b99818e..b7681102a4b 100644 --- a/include/linux/posix_acl.h +++ b/include/linux/posix_acl.h @@ -9,6 +9,7 @@ #define __LINUX_POSIX_ACL_H #include <linux/slab.h> +#include <linux/rcupdate.h> #define ACL_UNDEFINED_ID (-1) @@ -38,7 +39,10 @@ struct posix_acl_entry { }; struct posix_acl { - atomic_t a_refcount; + union { + atomic_t a_refcount; + struct rcu_head a_rcu; + }; unsigned int a_count; struct posix_acl_entry a_entries[0]; }; @@ -65,7 +69,7 @@ static inline void posix_acl_release(struct posix_acl *acl) { if (acl && atomic_dec_and_test(&acl->a_refcount)) - kfree(acl); + kfree_rcu(acl, a_rcu); } @@ -75,29 +79,31 @@ extern void posix_acl_init(struct posix_acl *, int); extern struct posix_acl *posix_acl_alloc(int, gfp_t); extern int posix_acl_valid(const struct posix_acl *); extern int posix_acl_permission(struct inode *, const struct posix_acl *, int); -extern struct posix_acl *posix_acl_from_mode(mode_t, gfp_t); -extern int posix_acl_equiv_mode(const struct posix_acl *, mode_t *); -extern int posix_acl_create(struct posix_acl **, gfp_t, mode_t *); -extern int posix_acl_chmod(struct posix_acl **, gfp_t, mode_t); +extern struct posix_acl *posix_acl_from_mode(umode_t, gfp_t); +extern int posix_acl_equiv_mode(const struct posix_acl *, umode_t *); +extern int posix_acl_create(struct posix_acl **, gfp_t, umode_t *); +extern int posix_acl_chmod(struct posix_acl **, gfp_t, umode_t); extern struct posix_acl *get_posix_acl(struct inode *, int); extern int set_posix_acl(struct inode *, int, struct posix_acl *); #ifdef CONFIG_FS_POSIX_ACL -static inline struct posix_acl *get_cached_acl(struct inode *inode, int type) +static inline struct posix_acl **acl_by_type(struct inode *inode, int type) { - struct posix_acl **p, *acl; switch (type) { case ACL_TYPE_ACCESS: - p = &inode->i_acl; - break; + return &inode->i_acl; case ACL_TYPE_DEFAULT: - p = &inode->i_default_acl; - break; + return &inode->i_default_acl; default: - return ERR_PTR(-EINVAL); + BUG(); } - acl = ACCESS_ONCE(*p); +} + +static inline struct posix_acl *get_cached_acl(struct inode *inode, int type) +{ + struct posix_acl **p = acl_by_type(inode, type); + struct posix_acl *acl = ACCESS_ONCE(*p); if (acl) { spin_lock(&inode->i_lock); acl = *p; @@ -108,41 +114,20 @@ static inline struct posix_acl *get_cached_acl(struct inode *inode, int type) return acl; } -static inline int negative_cached_acl(struct inode *inode, int type) +static inline struct posix_acl *get_cached_acl_rcu(struct inode *inode, int type) { - struct posix_acl **p, *acl; - switch (type) { - case ACL_TYPE_ACCESS: - p = &inode->i_acl; - break; - case ACL_TYPE_DEFAULT: - p = &inode->i_default_acl; - break; - default: - BUG(); - } - acl = ACCESS_ONCE(*p); - if (acl) - return 0; - return 1; + return rcu_dereference(*acl_by_type(inode, type)); } static inline void set_cached_acl(struct inode *inode, int type, struct posix_acl *acl) { - struct posix_acl *old = NULL; + struct posix_acl **p = acl_by_type(inode, type); + struct posix_acl *old; spin_lock(&inode->i_lock); - switch (type) { - case ACL_TYPE_ACCESS: - old = inode->i_acl; - inode->i_acl = posix_acl_dup(acl); - break; - case ACL_TYPE_DEFAULT: - old = inode->i_default_acl; - inode->i_default_acl = posix_acl_dup(acl); - break; - } + old = *p; + rcu_assign_pointer(*p, posix_acl_dup(acl)); spin_unlock(&inode->i_lock); if (old != ACL_NOT_CACHED) posix_acl_release(old); @@ -150,18 +135,11 @@ static inline void set_cached_acl(struct inode *inode, static inline void forget_cached_acl(struct inode *inode, int type) { - struct posix_acl *old = NULL; + struct posix_acl **p = acl_by_type(inode, type); + struct posix_acl *old; spin_lock(&inode->i_lock); - switch (type) { - case ACL_TYPE_ACCESS: - old = inode->i_acl; - inode->i_acl = ACL_NOT_CACHED; - break; - case ACL_TYPE_DEFAULT: - old = inode->i_default_acl; - inode->i_default_acl = ACL_NOT_CACHED; - break; - } + old = *p; + *p = ACL_NOT_CACHED; spin_unlock(&inode->i_lock); if (old != ACL_NOT_CACHED) posix_acl_release(old); diff --git a/include/linux/power/bq20z75.h b/include/linux/power/bq20z75.h index b0843b68af9..1398eb004e8 100644 --- a/include/linux/power/bq20z75.h +++ b/include/linux/power/bq20z75.h @@ -29,11 +29,14 @@ * @battery_detect: GPIO which is used to detect battery presence * @battery_detect_present: gpio state when battery is present (0 / 1) * @i2c_retry_count: # of times to retry on i2c IO failure + * @poll_retry_count: # of times to retry looking for new status after + * external change notification */ struct bq20z75_platform_data { int battery_detect; int battery_detect_present; int i2c_retry_count; + int poll_retry_count; }; #endif diff --git a/include/linux/power/max17042_battery.h b/include/linux/power/max17042_battery.h index 7995deb8bfc..fe99211fb2b 100644 --- a/include/linux/power/max17042_battery.h +++ b/include/linux/power/max17042_battery.h @@ -23,8 +23,99 @@ #ifndef __MAX17042_BATTERY_H_ #define __MAX17042_BATTERY_H_ +#define MAX17042_STATUS_BattAbsent (1 << 3) +#define MAX17042_BATTERY_FULL (100) +#define MAX17042_DEFAULT_SNS_RESISTOR (10000) + +enum max17042_register { + MAX17042_STATUS = 0x00, + MAX17042_VALRT_Th = 0x01, + MAX17042_TALRT_Th = 0x02, + MAX17042_SALRT_Th = 0x03, + MAX17042_AtRate = 0x04, + MAX17042_RepCap = 0x05, + MAX17042_RepSOC = 0x06, + MAX17042_Age = 0x07, + MAX17042_TEMP = 0x08, + MAX17042_VCELL = 0x09, + MAX17042_Current = 0x0A, + MAX17042_AvgCurrent = 0x0B, + MAX17042_Qresidual = 0x0C, + MAX17042_SOC = 0x0D, + MAX17042_AvSOC = 0x0E, + MAX17042_RemCap = 0x0F, + MAX17402_FullCAP = 0x10, + MAX17042_TTE = 0x11, + MAX17042_V_empty = 0x12, + + MAX17042_RSLOW = 0x14, + + MAX17042_AvgTA = 0x16, + MAX17042_Cycles = 0x17, + MAX17042_DesignCap = 0x18, + MAX17042_AvgVCELL = 0x19, + MAX17042_MinMaxTemp = 0x1A, + MAX17042_MinMaxVolt = 0x1B, + MAX17042_MinMaxCurr = 0x1C, + MAX17042_CONFIG = 0x1D, + MAX17042_ICHGTerm = 0x1E, + MAX17042_AvCap = 0x1F, + MAX17042_ManName = 0x20, + MAX17042_DevName = 0x21, + MAX17042_DevChem = 0x22, + + MAX17042_TempNom = 0x24, + MAX17042_TempCold = 0x25, + MAX17042_TempHot = 0x26, + MAX17042_AIN = 0x27, + MAX17042_LearnCFG = 0x28, + MAX17042_SHFTCFG = 0x29, + MAX17042_RelaxCFG = 0x2A, + MAX17042_MiscCFG = 0x2B, + MAX17042_TGAIN = 0x2C, + MAx17042_TOFF = 0x2D, + MAX17042_CGAIN = 0x2E, + MAX17042_COFF = 0x2F, + + MAX17042_Q_empty = 0x33, + MAX17042_T_empty = 0x34, + + MAX17042_RCOMP0 = 0x38, + MAX17042_TempCo = 0x39, + MAX17042_Rx = 0x3A, + MAX17042_T_empty0 = 0x3B, + MAX17042_TaskPeriod = 0x3C, + MAX17042_FSTAT = 0x3D, + + MAX17042_SHDNTIMER = 0x3F, + + MAX17042_VFRemCap = 0x4A, + + MAX17042_QH = 0x4D, + MAX17042_QL = 0x4E, +}; + +/* + * used for setting a register to a desired value + * addr : address for a register + * data : setting value for the register + */ +struct max17042_reg_data { + u8 addr; + u16 data; +}; + struct max17042_platform_data { + struct max17042_reg_data *init_data; + int num_init_data; /* Number of enties in init_data array */ bool enable_current_sense; + + /* + * R_sns in micro-ohms. + * default 10000 (if r_sns = 0) as it is the recommended value by + * the datasheet although it can be changed by board designers. + */ + unsigned int r_sns; }; #endif /* __MAX17042_BATTERY_H_ */ diff --git a/include/linux/pstore.h b/include/linux/pstore.h index 2455ef2683f..cc03bbf5c4b 100644 --- a/include/linux/pstore.h +++ b/include/linux/pstore.h @@ -38,9 +38,12 @@ struct pstore_info { int (*open)(struct pstore_info *psi); int (*close)(struct pstore_info *psi); ssize_t (*read)(u64 *id, enum pstore_type_id *type, - struct timespec *time); - u64 (*write)(enum pstore_type_id type, size_t size); - int (*erase)(u64 id); + struct timespec *time, struct pstore_info *psi); + u64 (*write)(enum pstore_type_id type, unsigned int part, + size_t size, struct pstore_info *psi); + int (*erase)(enum pstore_type_id type, u64 id, + struct pstore_info *psi); + void *data; }; #ifdef CONFIG_PSTORE diff --git a/include/linux/radix-tree.h b/include/linux/radix-tree.h index 23241c2fecc..9d4539c52e5 100644 --- a/include/linux/radix-tree.h +++ b/include/linux/radix-tree.h @@ -39,7 +39,15 @@ * when it is shrunk, before we rcu free the node. See shrink code for * details. */ -#define RADIX_TREE_INDIRECT_PTR 1 +#define RADIX_TREE_INDIRECT_PTR 1 +/* + * A common use of the radix tree is to store pointers to struct pages; + * but shmem/tmpfs needs also to store swap entries in the same tree: + * those are marked as exceptional entries to distinguish them. + * EXCEPTIONAL_ENTRY tests the bit, EXCEPTIONAL_SHIFT shifts content past it. + */ +#define RADIX_TREE_EXCEPTIONAL_ENTRY 2 +#define RADIX_TREE_EXCEPTIONAL_SHIFT 2 #define radix_tree_indirect_to_ptr(ptr) \ radix_tree_indirect_to_ptr((void __force *)(ptr)) @@ -174,6 +182,28 @@ static inline int radix_tree_deref_retry(void *arg) } /** + * radix_tree_exceptional_entry - radix_tree_deref_slot gave exceptional entry? + * @arg: value returned by radix_tree_deref_slot + * Returns: 0 if well-aligned pointer, non-0 if exceptional entry. + */ +static inline int radix_tree_exceptional_entry(void *arg) +{ + /* Not unlikely because radix_tree_exception often tested first */ + return (unsigned long)arg & RADIX_TREE_EXCEPTIONAL_ENTRY; +} + +/** + * radix_tree_exception - radix_tree_deref_slot returned either exception? + * @arg: value returned by radix_tree_deref_slot + * Returns: 0 if well-aligned pointer, non-0 if either kind of exception. + */ +static inline int radix_tree_exception(void *arg) +{ + return unlikely((unsigned long)arg & + (RADIX_TREE_INDIRECT_PTR | RADIX_TREE_EXCEPTIONAL_ENTRY)); +} + +/** * radix_tree_replace_slot - replace item in a slot * @pslot: pointer to slot, returned by radix_tree_lookup_slot * @item: new item to store in the slot. @@ -194,8 +224,8 @@ void *radix_tree_delete(struct radix_tree_root *, unsigned long); unsigned int radix_tree_gang_lookup(struct radix_tree_root *root, void **results, unsigned long first_index, unsigned int max_items); -unsigned int -radix_tree_gang_lookup_slot(struct radix_tree_root *root, void ***results, +unsigned int radix_tree_gang_lookup_slot(struct radix_tree_root *root, + void ***results, unsigned long *indices, unsigned long first_index, unsigned int max_items); unsigned long radix_tree_next_hole(struct radix_tree_root *root, unsigned long index, unsigned long max_scan); @@ -222,6 +252,7 @@ unsigned long radix_tree_range_tag_if_tagged(struct radix_tree_root *root, unsigned long nr_to_tag, unsigned int fromtag, unsigned int totag); int radix_tree_tagged(struct radix_tree_root *root, unsigned int tag); +unsigned long radix_tree_locate_item(struct radix_tree_root *root, void *item); static inline void radix_tree_preload_end(void) { diff --git a/include/linux/regulator/consumer.h b/include/linux/regulator/consumer.h index 9e87c1cb727..26f6ea4444e 100644 --- a/include/linux/regulator/consumer.h +++ b/include/linux/regulator/consumer.h @@ -122,6 +122,9 @@ struct regulator; struct regulator_bulk_data { const char *supply; struct regulator *consumer; + + /* Internal use */ + int ret; }; #if defined(CONFIG_REGULATOR) diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h index 6c433b89c80..1a80bc77517 100644 --- a/include/linux/regulator/driver.h +++ b/include/linux/regulator/driver.h @@ -188,18 +188,16 @@ struct regulator_dev { /* lists we belong to */ struct list_head list; /* list of all regulators */ - struct list_head slist; /* list of supplied regulators */ /* lists we own */ struct list_head consumer_list; /* consumers we supply */ - struct list_head supply_list; /* regulators we supply */ struct blocking_notifier_head notifier; struct mutex mutex; /* consumer lock */ struct module *owner; struct device dev; struct regulation_constraints *constraints; - struct regulator_dev *supply; /* for tree */ + struct regulator *supply; /* for tree */ void *reg_data; /* regulator_dev data */ diff --git a/include/linux/serial_sci.h b/include/linux/serial_sci.h index a2afc9fbe18..8bffe9ae2ca 100644 --- a/include/linux/serial_sci.h +++ b/include/linux/serial_sci.h @@ -8,6 +8,8 @@ * Generic header for SuperH SCI(F) (used by sh/sh64/h8300 and related parts) */ +#define SCIx_NOT_SUPPORTED (-1) + enum { SCBRR_ALGO_1, /* ((clk + 16 * bps) / (16 * bps) - 1) */ SCBRR_ALGO_2, /* ((clk + 16 * bps) / (32 * bps) - 1) */ @@ -25,6 +27,28 @@ enum { #define SCSCR_CKE1 (1 << 1) #define SCSCR_CKE0 (1 << 0) +/* SCxSR SCI */ +#define SCI_TDRE 0x80 +#define SCI_RDRF 0x40 +#define SCI_ORER 0x20 +#define SCI_FER 0x10 +#define SCI_PER 0x08 +#define SCI_TEND 0x04 + +#define SCI_DEFAULT_ERROR_MASK (SCI_PER | SCI_FER) + +/* SCxSR SCIF */ +#define SCIF_ER 0x0080 +#define SCIF_TEND 0x0040 +#define SCIF_TDFE 0x0020 +#define SCIF_BRK 0x0010 +#define SCIF_FER 0x0008 +#define SCIF_PER 0x0004 +#define SCIF_RDF 0x0002 +#define SCIF_DR 0x0001 + +#define SCIF_DEFAULT_ERROR_MASK (SCIF_PER | SCIF_FER | SCIF_ER | SCIF_BRK) + /* Offsets into the sci_port->irqs array */ enum { SCIx_ERI_IRQ, @@ -32,6 +56,24 @@ enum { SCIx_TXI_IRQ, SCIx_BRI_IRQ, SCIx_NR_IRQS, + + SCIx_MUX_IRQ = SCIx_NR_IRQS, /* special case */ +}; + +enum { + SCIx_PROBE_REGTYPE, + + SCIx_SCI_REGTYPE, + SCIx_IRDA_REGTYPE, + SCIx_SCIFA_REGTYPE, + SCIx_SCIFB_REGTYPE, + SCIx_SH3_SCIF_REGTYPE, + SCIx_SH4_SCIF_REGTYPE, + SCIx_SH4_SCIF_NO_SCSPTR_REGTYPE, + SCIx_SH4_SCIF_FIFODATA_REGTYPE, + SCIx_SH7705_SCIF_REGTYPE, + + SCIx_NR_REGTYPES, }; #define SCIx_IRQ_MUXED(irq) \ @@ -42,8 +84,29 @@ enum { [SCIx_BRI_IRQ] = (irq), \ } +#define SCIx_IRQ_IS_MUXED(port) \ + ((port)->cfg->irqs[SCIx_ERI_IRQ] == \ + (port)->cfg->irqs[SCIx_RXI_IRQ]) || \ + ((port)->cfg->irqs[SCIx_ERI_IRQ] && \ + !(port)->cfg->irqs[SCIx_RXI_IRQ]) +/* + * SCI register subset common for all port types. + * Not all registers will exist on all parts. + */ +enum { + SCSMR, SCBRR, SCSCR, SCxSR, + SCFCR, SCFDR, SCxTDR, SCxRDR, + SCLSR, SCTFDR, SCRFDR, SCSPTR, + + SCIx_NR_REGS, +}; + struct device; +struct plat_sci_port_ops { + void (*init_pins)(struct uart_port *, unsigned int cflag); +}; + /* * Platform device specific platform_data struct */ @@ -56,6 +119,18 @@ struct plat_sci_port { unsigned int scbrr_algo_id; /* SCBRR calculation algo */ unsigned int scscr; /* SCSCR initialization */ + /* + * Platform overrides if necessary, defaults otherwise. + */ + int overrun_bit; + unsigned int error_mask; + + int port_reg; + unsigned char regshift; + unsigned char regtype; + + struct plat_sci_port_ops *ops; + struct device *dma_dev; unsigned int dma_slave_tx; diff --git a/include/linux/sh_clk.h b/include/linux/sh_clk.h index 9a52f72527d..3ccf18648d0 100644 --- a/include/linux/sh_clk.h +++ b/include/linux/sh_clk.h @@ -147,4 +147,8 @@ int sh_clk_div4_reparent_register(struct clk *clks, int nr, int sh_clk_div6_register(struct clk *clks, int nr); int sh_clk_div6_reparent_register(struct clk *clks, int nr); +#define CLKDEV_CON_ID(_id, _clk) { .con_id = _id, .clk = _clk } +#define CLKDEV_DEV_ID(_id, _clk) { .dev_id = _id, .clk = _clk } +#define CLKDEV_ICK_ID(_cid, _did, _clk) { .con_id = _cid, .dev_id = _did, .clk = _clk } + #endif /* __SH_CLOCK_H */ diff --git a/include/linux/sh_dma.h b/include/linux/sh_dma.h index b08cd4efa15..cb2dd118cc0 100644 --- a/include/linux/sh_dma.h +++ b/include/linux/sh_dma.h @@ -62,6 +62,12 @@ struct sh_dmae_pdata { const unsigned int *ts_shift; int ts_shift_num; u16 dmaor_init; + unsigned int chcr_offset; + u32 chcr_ie_bit; + + unsigned int dmaor_is_32bit:1; + unsigned int needs_tend_set:1; + unsigned int no_dmars:1; }; /* DMA register */ @@ -71,6 +77,8 @@ struct sh_dmae_pdata { #define CHCR 0x0C #define DMAOR 0x40 +#define TEND 0x18 /* USB-DMAC */ + /* DMAOR definitions */ #define DMAOR_AE 0x00000004 #define DMAOR_NMIF 0x00000002 diff --git a/include/linux/shm.h b/include/linux/shm.h index 7d27ffde019..92808b86703 100644 --- a/include/linux/shm.h +++ b/include/linux/shm.h @@ -95,6 +95,9 @@ struct shmid_kernel /* private to the kernel */ pid_t shm_cprid; pid_t shm_lprid; struct user_struct *mlock_user; + + /* The task created the shm object. NULL if the task is dead. */ + struct task_struct *shm_creator; }; /* shm_mode upper byte flags */ diff --git a/include/linux/shmem_fs.h b/include/linux/shmem_fs.h index aa08fa8fd79..9291ac3cc62 100644 --- a/include/linux/shmem_fs.h +++ b/include/linux/shmem_fs.h @@ -8,22 +8,15 @@ /* inode in-kernel data */ -#define SHMEM_NR_DIRECT 16 - -#define SHMEM_SYMLINK_INLINE_LEN (SHMEM_NR_DIRECT * sizeof(swp_entry_t)) - struct shmem_inode_info { spinlock_t lock; unsigned long flags; unsigned long alloced; /* data pages alloced to file */ - unsigned long swapped; /* subtotal assigned to swap */ - unsigned long next_index; /* highest alloced index + 1 */ - struct shared_policy policy; /* NUMA memory alloc policy */ - struct page *i_indirect; /* top indirect blocks page */ union { - swp_entry_t i_direct[SHMEM_NR_DIRECT]; /* first blocks */ - char inline_symlink[SHMEM_SYMLINK_INLINE_LEN]; + unsigned long swapped; /* subtotal assigned to swap */ + char *symlink; /* unswappable short symlink */ }; + struct shared_policy policy; /* NUMA memory alloc policy */ struct list_head swaplist; /* chain of maybes on swap */ struct list_head xattr_list; /* list of shmem_xattr */ struct inode vfs_inode; @@ -49,7 +42,7 @@ static inline struct shmem_inode_info *SHMEM_I(struct inode *inode) /* * Functions in mm/shmem.c called directly from elsewhere: */ -extern int init_tmpfs(void); +extern int shmem_init(void); extern int shmem_fill_super(struct super_block *sb, void *data, int silent); extern struct file *shmem_file_setup(const char *name, loff_t size, unsigned long flags); @@ -59,8 +52,6 @@ extern struct page *shmem_read_mapping_page_gfp(struct address_space *mapping, pgoff_t index, gfp_t gfp_mask); extern void shmem_truncate_range(struct inode *inode, loff_t start, loff_t end); extern int shmem_unuse(swp_entry_t entry, struct page *page); -extern void mem_cgroup_get_shmem_target(struct inode *inode, pgoff_t pgoff, - struct page **pagep, swp_entry_t *ent); static inline struct page *shmem_read_mapping_page( struct address_space *mapping, pgoff_t index) diff --git a/include/linux/slub_def.h b/include/linux/slub_def.h index 4b35c06dfbc..f58d6413d23 100644 --- a/include/linux/slub_def.h +++ b/include/linux/slub_def.h @@ -24,6 +24,7 @@ enum stat_item { ALLOC_FROM_PARTIAL, /* Cpu slab acquired from partial list */ ALLOC_SLAB, /* Cpu slab acquired from page allocator */ ALLOC_REFILL, /* Refill cpu slab from slab freelist */ + ALLOC_NODE_MISMATCH, /* Switching cpu slab */ FREE_SLAB, /* Slab freed to the page allocator */ CPUSLAB_FLUSH, /* Abandoning of the cpu slab */ DEACTIVATE_FULL, /* Cpu slab was full when deactivated */ @@ -31,8 +32,10 @@ enum stat_item { DEACTIVATE_TO_HEAD, /* Cpu slab was moved to the head of partials */ DEACTIVATE_TO_TAIL, /* Cpu slab was moved to the tail of partials */ DEACTIVATE_REMOTE_FREES,/* Slab contained remotely freed objects */ + DEACTIVATE_BYPASS, /* Implicit deactivation */ ORDER_FALLBACK, /* Number of times fallback was necessary */ CMPXCHG_DOUBLE_CPU_FAIL,/* Failure of this_cpu_cmpxchg_double */ + CMPXCHG_DOUBLE_FAIL, /* Number of times that cmpxchg double did not match */ NR_SLUB_STAT_ITEMS }; struct kmem_cache_cpu { diff --git a/include/linux/swapops.h b/include/linux/swapops.h index cd42e30b7c6..2189d3ffc85 100644 --- a/include/linux/swapops.h +++ b/include/linux/swapops.h @@ -1,3 +1,8 @@ +#ifndef _LINUX_SWAPOPS_H +#define _LINUX_SWAPOPS_H + +#include <linux/radix-tree.h> + /* * swapcache pages are stored in the swapper_space radix tree. We want to * get good packing density in that tree, so the index should be dense in @@ -76,6 +81,22 @@ static inline pte_t swp_entry_to_pte(swp_entry_t entry) return __swp_entry_to_pte(arch_entry); } +static inline swp_entry_t radix_to_swp_entry(void *arg) +{ + swp_entry_t entry; + + entry.val = (unsigned long)arg >> RADIX_TREE_EXCEPTIONAL_SHIFT; + return entry; +} + +static inline void *swp_to_radix_entry(swp_entry_t entry) +{ + unsigned long value; + + value = entry.val << RADIX_TREE_EXCEPTIONAL_SHIFT; + return (void *)(value | RADIX_TREE_EXCEPTIONAL_ENTRY); +} + #ifdef CONFIG_MIGRATION static inline swp_entry_t make_migration_entry(struct page *page, int write) { @@ -169,3 +190,5 @@ static inline int non_swap_entry(swp_entry_t entry) return 0; } #endif + +#endif /* _LINUX_SWAPOPS_H */ diff --git a/include/linux/thermal.h b/include/linux/thermal.h index d3ec89fb412..47b4a27e6e9 100644 --- a/include/linux/thermal.h +++ b/include/linux/thermal.h @@ -85,22 +85,6 @@ struct thermal_cooling_device { ((long)t-2732+5)/10 : ((long)t-2732-5)/10) #define CELSIUS_TO_KELVIN(t) ((t)*10+2732) -#if defined(CONFIG_THERMAL_HWMON) -/* thermal zone devices with the same type share one hwmon device */ -struct thermal_hwmon_device { - char type[THERMAL_NAME_LENGTH]; - struct device *device; - int count; - struct list_head tz_list; - struct list_head node; -}; - -struct thermal_hwmon_attr { - struct device_attribute attr; - char name[16]; -}; -#endif - struct thermal_zone_device { int id; char type[THERMAL_NAME_LENGTH]; @@ -120,12 +104,6 @@ struct thermal_zone_device { struct mutex lock; /* protect cooling devices list */ struct list_head node; struct delayed_work poll_queue; -#if defined(CONFIG_THERMAL_HWMON) - struct list_head hwmon_node; - struct thermal_hwmon_device *hwmon; - struct thermal_hwmon_attr temp_input; /* hwmon sys attr */ - struct thermal_hwmon_attr temp_crit; /* hwmon sys attr */ -#endif }; /* Adding event notification support elements */ #define THERMAL_GENL_FAMILY_NAME "thermal_event" diff --git a/include/linux/videodev2.h b/include/linux/videodev2.h index 8a4c309d234..fca24cc5043 100644 --- a/include/linux/videodev2.h +++ b/include/linux/videodev2.h @@ -376,7 +376,16 @@ struct v4l2_pix_format { #define V4L2_PIX_FMT_MJPEG v4l2_fourcc('M', 'J', 'P', 'G') /* Motion-JPEG */ #define V4L2_PIX_FMT_JPEG v4l2_fourcc('J', 'P', 'E', 'G') /* JFIF JPEG */ #define V4L2_PIX_FMT_DV v4l2_fourcc('d', 'v', 's', 'd') /* 1394 */ -#define V4L2_PIX_FMT_MPEG v4l2_fourcc('M', 'P', 'E', 'G') /* MPEG-1/2/4 */ +#define V4L2_PIX_FMT_MPEG v4l2_fourcc('M', 'P', 'E', 'G') /* MPEG-1/2/4 Multiplexed */ +#define V4L2_PIX_FMT_H264 v4l2_fourcc('H', '2', '6', '4') /* H264 with start codes */ +#define V4L2_PIX_FMT_H264_NO_SC v4l2_fourcc('A', 'V', 'C', '1') /* H264 without start codes */ +#define V4L2_PIX_FMT_H263 v4l2_fourcc('H', '2', '6', '3') /* H263 */ +#define V4L2_PIX_FMT_MPEG1 v4l2_fourcc('M', 'P', 'G', '1') /* MPEG-1 ES */ +#define V4L2_PIX_FMT_MPEG2 v4l2_fourcc('M', 'P', 'G', '2') /* MPEG-2 ES */ +#define V4L2_PIX_FMT_MPEG4 v4l2_fourcc('M', 'P', 'G', '4') /* MPEG-4 ES */ +#define V4L2_PIX_FMT_XVID v4l2_fourcc('X', 'V', 'I', 'D') /* Xvid */ +#define V4L2_PIX_FMT_VC1_ANNEX_G v4l2_fourcc('V', 'C', '1', 'G') /* SMPTE 421M Annex G compliant stream */ +#define V4L2_PIX_FMT_VC1_ANNEX_L v4l2_fourcc('V', 'C', '1', 'L') /* SMPTE 421M Annex L compliant stream */ /* Vendor-specific formats */ #define V4L2_PIX_FMT_CPIA1 v4l2_fourcc('C', 'P', 'I', 'A') /* cpia1 YUV */ @@ -402,6 +411,7 @@ struct v4l2_pix_format { #define V4L2_PIX_FMT_CIT_YYVYUY v4l2_fourcc('C', 'I', 'T', 'V') /* one line of Y then 1 line of VYUY */ #define V4L2_PIX_FMT_KONICA420 v4l2_fourcc('K', 'O', 'N', 'I') /* YUV420 planar in blocks of 256 pixels */ #define V4L2_PIX_FMT_JPGL v4l2_fourcc('J', 'P', 'G', 'L') /* JPEG-Lite */ +#define V4L2_PIX_FMT_SE401 v4l2_fourcc('S', '4', '0', '1') /* se401 janggu compressed rgb */ /* * F O R M A T E N U M E R A T I O N @@ -1026,6 +1036,7 @@ struct v4l2_ext_controls { #define V4L2_CTRL_CLASS_MPEG 0x00990000 /* MPEG-compression controls */ #define V4L2_CTRL_CLASS_CAMERA 0x009a0000 /* Camera class controls */ #define V4L2_CTRL_CLASS_FM_TX 0x009b0000 /* FM Modulator control class */ +#define V4L2_CTRL_CLASS_FLASH 0x009c0000 /* Camera flash controls */ #define V4L2_CTRL_ID_MASK (0x0fffffff) #define V4L2_CTRL_ID2CLASS(id) ((id) & 0x0fff0000UL) @@ -1039,6 +1050,7 @@ enum v4l2_ctrl_type { V4L2_CTRL_TYPE_INTEGER64 = 5, V4L2_CTRL_TYPE_CTRL_CLASS = 6, V4L2_CTRL_TYPE_STRING = 7, + V4L2_CTRL_TYPE_BITMASK = 8, }; /* Used in the VIDIOC_QUERYCTRL ioctl for querying controls */ @@ -1144,14 +1156,19 @@ enum v4l2_colorfx { #define V4L2_CID_ILLUMINATORS_1 (V4L2_CID_BASE+37) #define V4L2_CID_ILLUMINATORS_2 (V4L2_CID_BASE+38) +#define V4L2_CID_MIN_BUFFERS_FOR_CAPTURE (V4L2_CID_BASE+39) +#define V4L2_CID_MIN_BUFFERS_FOR_OUTPUT (V4L2_CID_BASE+40) + /* last CID + 1 */ -#define V4L2_CID_LASTP1 (V4L2_CID_BASE+39) +#define V4L2_CID_LASTP1 (V4L2_CID_BASE+41) + +/* Minimum number of buffer neede by the device */ /* MPEG-class control IDs defined by V4L2 */ #define V4L2_CID_MPEG_BASE (V4L2_CTRL_CLASS_MPEG | 0x900) #define V4L2_CID_MPEG_CLASS (V4L2_CTRL_CLASS_MPEG | 1) -/* MPEG streams */ +/* MPEG streams, specific to multiplexed streams */ #define V4L2_CID_MPEG_STREAM_TYPE (V4L2_CID_MPEG_BASE+0) enum v4l2_mpeg_stream_type { V4L2_MPEG_STREAM_TYPE_MPEG2_PS = 0, /* MPEG-2 program stream */ @@ -1173,7 +1190,7 @@ enum v4l2_mpeg_stream_vbi_fmt { V4L2_MPEG_STREAM_VBI_FMT_IVTV = 1, /* VBI in private packets, IVTV format */ }; -/* MPEG audio */ +/* MPEG audio controls specific to multiplexed streams */ #define V4L2_CID_MPEG_AUDIO_SAMPLING_FREQ (V4L2_CID_MPEG_BASE+100) enum v4l2_mpeg_audio_sampling_freq { V4L2_MPEG_AUDIO_SAMPLING_FREQ_44100 = 0, @@ -1289,7 +1306,7 @@ enum v4l2_mpeg_audio_ac3_bitrate { V4L2_MPEG_AUDIO_AC3_BITRATE_640K = 18, }; -/* MPEG video */ +/* MPEG video controls specific to multiplexed streams */ #define V4L2_CID_MPEG_VIDEO_ENCODING (V4L2_CID_MPEG_BASE+200) enum v4l2_mpeg_video_encoding { V4L2_MPEG_VIDEO_ENCODING_MPEG_1 = 0, @@ -1317,6 +1334,141 @@ enum v4l2_mpeg_video_bitrate_mode { #define V4L2_CID_MPEG_VIDEO_TEMPORAL_DECIMATION (V4L2_CID_MPEG_BASE+209) #define V4L2_CID_MPEG_VIDEO_MUTE (V4L2_CID_MPEG_BASE+210) #define V4L2_CID_MPEG_VIDEO_MUTE_YUV (V4L2_CID_MPEG_BASE+211) +#define V4L2_CID_MPEG_VIDEO_DECODER_SLICE_INTERFACE (V4L2_CID_MPEG_BASE+212) +#define V4L2_CID_MPEG_VIDEO_DECODER_MPEG4_DEBLOCK_FILTER (V4L2_CID_MPEG_BASE+213) +#define V4L2_CID_MPEG_VIDEO_CYCLIC_INTRA_REFRESH_MB (V4L2_CID_MPEG_BASE+214) +#define V4L2_CID_MPEG_VIDEO_FRAME_RC_ENABLE (V4L2_CID_MPEG_BASE+215) +#define V4L2_CID_MPEG_VIDEO_HEADER_MODE (V4L2_CID_MPEG_BASE+216) +enum v4l2_mpeg_video_header_mode { + V4L2_MPEG_VIDEO_HEADER_MODE_SEPARATE = 0, + V4L2_MPEG_VIDEO_HEADER_MODE_JOINED_WITH_1ST_FRAME = 1, + +}; +#define V4L2_CID_MPEG_VIDEO_MAX_REF_PIC (V4L2_CID_MPEG_BASE+217) +#define V4L2_CID_MPEG_VIDEO_MB_RC_ENABLE (V4L2_CID_MPEG_BASE+218) +#define V4L2_CID_MPEG_VIDEO_MULTI_SLICE_MAX_BYTES (V4L2_CID_MPEG_BASE+219) +#define V4L2_CID_MPEG_VIDEO_MULTI_SLICE_MAX_MB (V4L2_CID_MPEG_BASE+220) +#define V4L2_CID_MPEG_VIDEO_MULTI_SLICE_MODE (V4L2_CID_MPEG_BASE+221) +enum v4l2_mpeg_video_multi_slice_mode { + V4L2_MPEG_VIDEO_MULTI_SLICE_MODE_SINGLE = 0, + V4L2_MPEG_VIDEO_MULTI_SICE_MODE_MAX_MB = 1, + V4L2_MPEG_VIDEO_MULTI_SICE_MODE_MAX_BYTES = 2, +}; +#define V4L2_CID_MPEG_VIDEO_VBV_SIZE (V4L2_CID_MPEG_BASE+222) +#define V4L2_CID_MPEG_VIDEO_H263_I_FRAME_QP (V4L2_CID_MPEG_BASE+300) +#define V4L2_CID_MPEG_VIDEO_H263_P_FRAME_QP (V4L2_CID_MPEG_BASE+301) +#define V4L2_CID_MPEG_VIDEO_H263_B_FRAME_QP (V4L2_CID_MPEG_BASE+302) +#define V4L2_CID_MPEG_VIDEO_H263_MIN_QP (V4L2_CID_MPEG_BASE+303) +#define V4L2_CID_MPEG_VIDEO_H263_MAX_QP (V4L2_CID_MPEG_BASE+304) +#define V4L2_CID_MPEG_VIDEO_H264_I_FRAME_QP (V4L2_CID_MPEG_BASE+350) +#define V4L2_CID_MPEG_VIDEO_H264_P_FRAME_QP (V4L2_CID_MPEG_BASE+351) +#define V4L2_CID_MPEG_VIDEO_H264_B_FRAME_QP (V4L2_CID_MPEG_BASE+352) +#define V4L2_CID_MPEG_VIDEO_H264_MIN_QP (V4L2_CID_MPEG_BASE+353) +#define V4L2_CID_MPEG_VIDEO_H264_MAX_QP (V4L2_CID_MPEG_BASE+354) +#define V4L2_CID_MPEG_VIDEO_H264_8X8_TRANSFORM (V4L2_CID_MPEG_BASE+355) +#define V4L2_CID_MPEG_VIDEO_H264_CPB_SIZE (V4L2_CID_MPEG_BASE+356) +#define V4L2_CID_MPEG_VIDEO_H264_ENTROPY_MODE (V4L2_CID_MPEG_BASE+357) +enum v4l2_mpeg_video_h264_entropy_mode { + V4L2_MPEG_VIDEO_H264_ENTROPY_MODE_CAVLC = 0, + V4L2_MPEG_VIDEO_H264_ENTROPY_MODE_CABAC = 1, +}; +#define V4L2_CID_MPEG_VIDEO_H264_I_PERIOD (V4L2_CID_MPEG_BASE+358) +#define V4L2_CID_MPEG_VIDEO_H264_LEVEL (V4L2_CID_MPEG_BASE+359) +enum v4l2_mpeg_video_h264_level { + V4L2_MPEG_VIDEO_H264_LEVEL_1_0 = 0, + V4L2_MPEG_VIDEO_H264_LEVEL_1B = 1, + V4L2_MPEG_VIDEO_H264_LEVEL_1_1 = 2, + V4L2_MPEG_VIDEO_H264_LEVEL_1_2 = 3, + V4L2_MPEG_VIDEO_H264_LEVEL_1_3 = 4, + V4L2_MPEG_VIDEO_H264_LEVEL_2_0 = 5, + V4L2_MPEG_VIDEO_H264_LEVEL_2_1 = 6, + V4L2_MPEG_VIDEO_H264_LEVEL_2_2 = 7, + V4L2_MPEG_VIDEO_H264_LEVEL_3_0 = 8, + V4L2_MPEG_VIDEO_H264_LEVEL_3_1 = 9, + V4L2_MPEG_VIDEO_H264_LEVEL_3_2 = 10, + V4L2_MPEG_VIDEO_H264_LEVEL_4_0 = 11, + V4L2_MPEG_VIDEO_H264_LEVEL_4_1 = 12, + V4L2_MPEG_VIDEO_H264_LEVEL_4_2 = 13, + V4L2_MPEG_VIDEO_H264_LEVEL_5_0 = 14, + V4L2_MPEG_VIDEO_H264_LEVEL_5_1 = 15, +}; +#define V4L2_CID_MPEG_VIDEO_H264_LOOP_FILTER_ALPHA (V4L2_CID_MPEG_BASE+360) +#define V4L2_CID_MPEG_VIDEO_H264_LOOP_FILTER_BETA (V4L2_CID_MPEG_BASE+361) +#define V4L2_CID_MPEG_VIDEO_H264_LOOP_FILTER_MODE (V4L2_CID_MPEG_BASE+362) +enum v4l2_mpeg_video_h264_loop_filter_mode { + V4L2_MPEG_VIDEO_H264_LOOP_FILTER_MODE_ENABLED = 0, + V4L2_MPEG_VIDEO_H264_LOOP_FILTER_MODE_DISABLED = 1, + V4L2_MPEG_VIDEO_H264_LOOP_FILTER_MODE_DISABLED_AT_SLICE_BOUNDARY = 2, +}; +#define V4L2_CID_MPEG_VIDEO_H264_PROFILE (V4L2_CID_MPEG_BASE+363) +enum v4l2_mpeg_video_h264_profile { + V4L2_MPEG_VIDEO_H264_PROFILE_BASELINE = 0, + V4L2_MPEG_VIDEO_H264_PROFILE_CONSTRAINED_BASELINE = 1, + V4L2_MPEG_VIDEO_H264_PROFILE_MAIN = 2, + V4L2_MPEG_VIDEO_H264_PROFILE_EXTENDED = 3, + V4L2_MPEG_VIDEO_H264_PROFILE_HIGH = 4, + V4L2_MPEG_VIDEO_H264_PROFILE_HIGH_10 = 5, + V4L2_MPEG_VIDEO_H264_PROFILE_HIGH_422 = 6, + V4L2_MPEG_VIDEO_H264_PROFILE_HIGH_444_PREDICTIVE = 7, + V4L2_MPEG_VIDEO_H264_PROFILE_HIGH_10_INTRA = 8, + V4L2_MPEG_VIDEO_H264_PROFILE_HIGH_422_INTRA = 9, + V4L2_MPEG_VIDEO_H264_PROFILE_HIGH_444_INTRA = 10, + V4L2_MPEG_VIDEO_H264_PROFILE_CAVLC_444_INTRA = 11, + V4L2_MPEG_VIDEO_H264_PROFILE_SCALABLE_BASELINE = 12, + V4L2_MPEG_VIDEO_H264_PROFILE_SCALABLE_HIGH = 13, + V4L2_MPEG_VIDEO_H264_PROFILE_SCALABLE_HIGH_INTRA = 14, + V4L2_MPEG_VIDEO_H264_PROFILE_STEREO_HIGH = 15, + V4L2_MPEG_VIDEO_H264_PROFILE_MULTIVIEW_HIGH = 16, +}; +#define V4L2_CID_MPEG_VIDEO_H264_VUI_EXT_SAR_HEIGHT (V4L2_CID_MPEG_BASE+364) +#define V4L2_CID_MPEG_VIDEO_H264_VUI_EXT_SAR_WIDTH (V4L2_CID_MPEG_BASE+365) +#define V4L2_CID_MPEG_VIDEO_H264_VUI_SAR_ENABLE (V4L2_CID_MPEG_BASE+366) +#define V4L2_CID_MPEG_VIDEO_H264_VUI_SAR_IDC (V4L2_CID_MPEG_BASE+367) +enum v4l2_mpeg_video_h264_vui_sar_idc { + V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_UNSPECIFIED = 0, + V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_1x1 = 1, + V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_12x11 = 2, + V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_10x11 = 3, + V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_16x11 = 4, + V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_40x33 = 5, + V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_24x11 = 6, + V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_20x11 = 7, + V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_32x11 = 8, + V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_80x33 = 9, + V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_18x11 = 10, + V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_15x11 = 11, + V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_64x33 = 12, + V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_160x99 = 13, + V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_4x3 = 14, + V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_3x2 = 15, + V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_2x1 = 16, + V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_EXTENDED = 17, +}; +#define V4L2_CID_MPEG_VIDEO_MPEG4_I_FRAME_QP (V4L2_CID_MPEG_BASE+400) +#define V4L2_CID_MPEG_VIDEO_MPEG4_P_FRAME_QP (V4L2_CID_MPEG_BASE+401) +#define V4L2_CID_MPEG_VIDEO_MPEG4_B_FRAME_QP (V4L2_CID_MPEG_BASE+402) +#define V4L2_CID_MPEG_VIDEO_MPEG4_MIN_QP (V4L2_CID_MPEG_BASE+403) +#define V4L2_CID_MPEG_VIDEO_MPEG4_MAX_QP (V4L2_CID_MPEG_BASE+404) +#define V4L2_CID_MPEG_VIDEO_MPEG4_LEVEL (V4L2_CID_MPEG_BASE+405) +enum v4l2_mpeg_video_mpeg4_level { + V4L2_MPEG_VIDEO_MPEG4_LEVEL_0 = 0, + V4L2_MPEG_VIDEO_MPEG4_LEVEL_0B = 1, + V4L2_MPEG_VIDEO_MPEG4_LEVEL_1 = 2, + V4L2_MPEG_VIDEO_MPEG4_LEVEL_2 = 3, + V4L2_MPEG_VIDEO_MPEG4_LEVEL_3 = 4, + V4L2_MPEG_VIDEO_MPEG4_LEVEL_3B = 5, + V4L2_MPEG_VIDEO_MPEG4_LEVEL_4 = 6, + V4L2_MPEG_VIDEO_MPEG4_LEVEL_5 = 7, +}; +#define V4L2_CID_MPEG_VIDEO_MPEG4_PROFILE (V4L2_CID_MPEG_BASE+406) +enum v4l2_mpeg_video_mpeg4_profile { + V4L2_MPEG_VIDEO_MPEG4_PROFILE_SIMPLE = 0, + V4L2_MPEG_VIDEO_MPEG4_PROFILE_ADVANCED_SIMPLE = 1, + V4L2_MPEG_VIDEO_MPEG4_PROFILE_CORE = 2, + V4L2_MPEG_VIDEO_MPEG4_PROFILE_SIMPLE_SCALABLE = 3, + V4L2_MPEG_VIDEO_MPEG4_PROFILE_ADVANCED_CODING_EFFICIENCY = 4, +}; +#define V4L2_CID_MPEG_VIDEO_MPEG4_QPEL (V4L2_CID_MPEG_BASE+407) /* MPEG-class control IDs specific to the CX2341x driver as defined by V4L2 */ #define V4L2_CID_MPEG_CX2341X_BASE (V4L2_CTRL_CLASS_MPEG | 0x1000) @@ -1359,6 +1511,33 @@ enum v4l2_mpeg_cx2341x_video_median_filter_type { #define V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_MEDIAN_FILTER_TOP (V4L2_CID_MPEG_CX2341X_BASE+10) #define V4L2_CID_MPEG_CX2341X_STREAM_INSERT_NAV_PACKETS (V4L2_CID_MPEG_CX2341X_BASE+11) +/* MPEG-class control IDs specific to the Samsung MFC 5.1 driver as defined by V4L2 */ +#define V4L2_CID_MPEG_MFC51_BASE (V4L2_CTRL_CLASS_MPEG | 0x1100) + +#define V4L2_CID_MPEG_MFC51_VIDEO_DECODER_H264_DISPLAY_DELAY (V4L2_CID_MPEG_MFC51_BASE+0) +#define V4L2_CID_MPEG_MFC51_VIDEO_DECODER_H264_DISPLAY_DELAY_ENABLE (V4L2_CID_MPEG_MFC51_BASE+1) +#define V4L2_CID_MPEG_MFC51_VIDEO_FRAME_SKIP_MODE (V4L2_CID_MPEG_MFC51_BASE+2) +enum v4l2_mpeg_mfc51_video_frame_skip_mode { + V4L2_MPEG_MFC51_VIDEO_FRAME_SKIP_MODE_DISABLED = 0, + V4L2_MPEG_MFC51_VIDEO_FRAME_SKIP_MODE_LEVEL_LIMIT = 1, + V4L2_MPEG_MFC51_VIDEO_FRAME_SKIP_MODE_BUF_LIMIT = 2, +}; +#define V4L2_CID_MPEG_MFC51_VIDEO_FORCE_FRAME_TYPE (V4L2_CID_MPEG_MFC51_BASE+3) +enum v4l2_mpeg_mfc51_video_force_frame_type { + V4L2_MPEG_MFC51_VIDEO_FORCE_FRAME_TYPE_DISABLED = 0, + V4L2_MPEG_MFC51_VIDEO_FORCE_FRAME_TYPE_I_FRAME = 1, + V4L2_MPEG_MFC51_VIDEO_FORCE_FRAME_TYPE_NOT_CODED = 2, +}; +#define V4L2_CID_MPEG_MFC51_VIDEO_PADDING (V4L2_CID_MPEG_MFC51_BASE+4) +#define V4L2_CID_MPEG_MFC51_VIDEO_PADDING_YUV (V4L2_CID_MPEG_MFC51_BASE+5) +#define V4L2_CID_MPEG_MFC51_VIDEO_RC_FIXED_TARGET_BIT (V4L2_CID_MPEG_MFC51_BASE+6) +#define V4L2_CID_MPEG_MFC51_VIDEO_RC_REACTION_COEFF (V4L2_CID_MPEG_MFC51_BASE+7) +#define V4L2_CID_MPEG_MFC51_VIDEO_H264_ADAPTIVE_RC_ACTIVITY (V4L2_CID_MPEG_MFC51_BASE+50) +#define V4L2_CID_MPEG_MFC51_VIDEO_H264_ADAPTIVE_RC_DARK (V4L2_CID_MPEG_MFC51_BASE+51) +#define V4L2_CID_MPEG_MFC51_VIDEO_H264_ADAPTIVE_RC_SMOOTH (V4L2_CID_MPEG_MFC51_BASE+52) +#define V4L2_CID_MPEG_MFC51_VIDEO_H264_ADAPTIVE_RC_STATIC (V4L2_CID_MPEG_MFC51_BASE+53) +#define V4L2_CID_MPEG_MFC51_VIDEO_H264_NUM_REF_PIC_FOR_P (V4L2_CID_MPEG_MFC51_BASE+54) + /* Camera class control IDs */ #define V4L2_CID_CAMERA_CLASS_BASE (V4L2_CTRL_CLASS_CAMERA | 0x900) #define V4L2_CID_CAMERA_CLASS (V4L2_CTRL_CLASS_CAMERA | 1) @@ -1427,6 +1606,41 @@ enum v4l2_preemphasis { #define V4L2_CID_TUNE_POWER_LEVEL (V4L2_CID_FM_TX_CLASS_BASE + 113) #define V4L2_CID_TUNE_ANTENNA_CAPACITOR (V4L2_CID_FM_TX_CLASS_BASE + 114) +/* Flash and privacy (indicator) light controls */ +#define V4L2_CID_FLASH_CLASS_BASE (V4L2_CTRL_CLASS_FLASH | 0x900) +#define V4L2_CID_FLASH_CLASS (V4L2_CTRL_CLASS_FLASH | 1) + +#define V4L2_CID_FLASH_LED_MODE (V4L2_CID_FLASH_CLASS_BASE + 1) +enum v4l2_flash_led_mode { + V4L2_FLASH_LED_MODE_NONE, + V4L2_FLASH_LED_MODE_FLASH, + V4L2_FLASH_LED_MODE_TORCH, +}; + +#define V4L2_CID_FLASH_STROBE_SOURCE (V4L2_CID_FLASH_CLASS_BASE + 2) +enum v4l2_flash_strobe_source { + V4L2_FLASH_STROBE_SOURCE_SOFTWARE, + V4L2_FLASH_STROBE_SOURCE_EXTERNAL, +}; + +#define V4L2_CID_FLASH_STROBE (V4L2_CID_FLASH_CLASS_BASE + 3) +#define V4L2_CID_FLASH_STROBE_STOP (V4L2_CID_FLASH_CLASS_BASE + 4) +#define V4L2_CID_FLASH_STROBE_STATUS (V4L2_CID_FLASH_CLASS_BASE + 5) + +#define V4L2_CID_FLASH_TIMEOUT (V4L2_CID_FLASH_CLASS_BASE + 6) +#define V4L2_CID_FLASH_INTENSITY (V4L2_CID_FLASH_CLASS_BASE + 7) +#define V4L2_CID_FLASH_TORCH_INTENSITY (V4L2_CID_FLASH_CLASS_BASE + 8) +#define V4L2_CID_FLASH_INDICATOR_INTENSITY (V4L2_CID_FLASH_CLASS_BASE + 9) + +#define V4L2_CID_FLASH_FAULT (V4L2_CID_FLASH_CLASS_BASE + 10) +#define V4L2_FLASH_FAULT_OVER_VOLTAGE (1 << 0) +#define V4L2_FLASH_FAULT_TIMEOUT (1 << 1) +#define V4L2_FLASH_FAULT_OVER_TEMPERATURE (1 << 2) +#define V4L2_FLASH_FAULT_SHORT_CIRCUIT (1 << 3) + +#define V4L2_CID_FLASH_CHARGE (V4L2_CID_FLASH_CLASS_BASE + 11) +#define V4L2_CID_FLASH_READY (V4L2_CID_FLASH_CLASS_BASE + 12) + /* * T U N I N G */ @@ -1791,6 +2005,7 @@ struct v4l2_streamparm { #define V4L2_EVENT_ALL 0 #define V4L2_EVENT_VSYNC 1 #define V4L2_EVENT_EOS 2 +#define V4L2_EVENT_CTRL 3 #define V4L2_EVENT_PRIVATE_START 0x08000000 /* Payload for V4L2_EVENT_VSYNC */ @@ -1799,21 +2014,46 @@ struct v4l2_event_vsync { __u8 field; } __attribute__ ((packed)); +/* Payload for V4L2_EVENT_CTRL */ +#define V4L2_EVENT_CTRL_CH_VALUE (1 << 0) +#define V4L2_EVENT_CTRL_CH_FLAGS (1 << 1) + +struct v4l2_event_ctrl { + __u32 changes; + __u32 type; + union { + __s32 value; + __s64 value64; + }; + __u32 flags; + __s32 minimum; + __s32 maximum; + __s32 step; + __s32 default_value; +}; + struct v4l2_event { __u32 type; union { struct v4l2_event_vsync vsync; + struct v4l2_event_ctrl ctrl; __u8 data[64]; } u; __u32 pending; __u32 sequence; struct timespec timestamp; - __u32 reserved[9]; + __u32 id; + __u32 reserved[8]; }; +#define V4L2_EVENT_SUB_FL_SEND_INITIAL (1 << 0) +#define V4L2_EVENT_SUB_FL_ALLOW_FEEDBACK (1 << 1) + struct v4l2_event_subscription { __u32 type; - __u32 reserved[7]; + __u32 id; + __u32 flags; + __u32 reserved[5]; }; /* diff --git a/include/linux/watchdog.h b/include/linux/watchdog.h index 011bcfeb9f0..111843f88b2 100644 --- a/include/linux/watchdog.h +++ b/include/linux/watchdog.h @@ -59,6 +59,84 @@ struct watchdog_info { #define WATCHDOG_NOWAYOUT 0 #endif +struct watchdog_ops; +struct watchdog_device; + +/** struct watchdog_ops - The watchdog-devices operations + * + * @owner: The module owner. + * @start: The routine for starting the watchdog device. + * @stop: The routine for stopping the watchdog device. + * @ping: The routine that sends a keepalive ping to the watchdog device. + * @status: The routine that shows the status of the watchdog device. + * @set_timeout:The routine for setting the watchdog devices timeout value. + * @ioctl: The routines that handles extra ioctl calls. + * + * The watchdog_ops structure contains a list of low-level operations + * that control a watchdog device. It also contains the module that owns + * these operations. The start and stop function are mandatory, all other + * functions are optonal. + */ +struct watchdog_ops { + struct module *owner; + /* mandatory operations */ + int (*start)(struct watchdog_device *); + int (*stop)(struct watchdog_device *); + /* optional operations */ + int (*ping)(struct watchdog_device *); + unsigned int (*status)(struct watchdog_device *); + int (*set_timeout)(struct watchdog_device *, unsigned int); + long (*ioctl)(struct watchdog_device *, unsigned int, unsigned long); +}; + +/** struct watchdog_device - The structure that defines a watchdog device + * + * @info: Pointer to a watchdog_info structure. + * @ops: Pointer to the list of watchdog operations. + * @bootstatus: Status of the watchdog device at boot. + * @timeout: The watchdog devices timeout value. + * @min_timeout:The watchdog devices minimum timeout value. + * @max_timeout:The watchdog devices maximum timeout value. + * @driver-data:Pointer to the drivers private data. + * @status: Field that contains the devices internal status bits. + * + * The watchdog_device structure contains all information about a + * watchdog timer device. + * + * The driver-data field may not be accessed directly. It must be accessed + * via the watchdog_set_drvdata and watchdog_get_drvdata helpers. + */ +struct watchdog_device { + const struct watchdog_info *info; + const struct watchdog_ops *ops; + unsigned int bootstatus; + unsigned int timeout; + unsigned int min_timeout; + unsigned int max_timeout; + void *driver_data; + unsigned long status; +/* Bit numbers for status flags */ +#define WDOG_ACTIVE 0 /* Is the watchdog running/active */ +#define WDOG_DEV_OPEN 1 /* Opened via /dev/watchdog ? */ +#define WDOG_ALLOW_RELEASE 2 /* Did we receive the magic char ? */ +#define WDOG_NO_WAY_OUT 3 /* Is 'nowayout' feature set ? */ +}; + +/* Use the following functions to manipulate watchdog driver specific data */ +static inline void watchdog_set_drvdata(struct watchdog_device *wdd, void *data) +{ + wdd->driver_data = data; +} + +static inline void *watchdog_get_drvdata(struct watchdog_device *wdd) +{ + return wdd->driver_data; +} + +/* drivers/watchdog/core/watchdog_core.c */ +extern int watchdog_register_device(struct watchdog_device *); +extern void watchdog_unregister_device(struct watchdog_device *); + #endif /* __KERNEL__ */ #endif /* ifndef _LINUX_WATCHDOG_H */ diff --git a/include/media/adp1653.h b/include/media/adp1653.h new file mode 100644 index 00000000000..50a1af88aed --- /dev/null +++ b/include/media/adp1653.h @@ -0,0 +1,126 @@ +/* + * include/media/adp1653.h + * + * Copyright (C) 2008--2011 Nokia Corporation + * + * Contact: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com> + * + * Contributors: + * Sakari Ailus <sakari.ailus@maxwell.research.nokia.com> + * Tuukka Toivonen <tuukkat76@gmail.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#ifndef ADP1653_H +#define ADP1653_H + +#include <linux/i2c.h> +#include <linux/mutex.h> +#include <linux/videodev2.h> +#include <media/v4l2-ctrls.h> +#include <media/v4l2-subdev.h> + +#define ADP1653_NAME "adp1653" +#define ADP1653_I2C_ADDR (0x60 >> 1) + +/* Register definitions */ +#define ADP1653_REG_OUT_SEL 0x00 +#define ADP1653_REG_OUT_SEL_HPLED_TORCH_MIN 0x01 +#define ADP1653_REG_OUT_SEL_HPLED_TORCH_MAX 0x0b +#define ADP1653_REG_OUT_SEL_HPLED_FLASH_MIN 0x0c +#define ADP1653_REG_OUT_SEL_HPLED_FLASH_MAX 0x1f +#define ADP1653_REG_OUT_SEL_HPLED_SHIFT 3 +#define ADP1653_REG_OUT_SEL_ILED_MAX 0x07 +#define ADP1653_REG_OUT_SEL_ILED_SHIFT 0 + +#define ADP1653_REG_CONFIG 0x01 +#define ADP1653_REG_CONFIG_TMR_CFG (1 << 4) +#define ADP1653_REG_CONFIG_TMR_SET_MAX 0x0f +#define ADP1653_REG_CONFIG_TMR_SET_SHIFT 0 + +#define ADP1653_REG_SW_STROBE 0x02 +#define ADP1653_REG_SW_STROBE_SW_STROBE (1 << 0) + +#define ADP1653_REG_FAULT 0x03 +#define ADP1653_REG_FAULT_FLT_SCP (1 << 3) +#define ADP1653_REG_FAULT_FLT_OT (1 << 2) +#define ADP1653_REG_FAULT_FLT_TMR (1 << 1) +#define ADP1653_REG_FAULT_FLT_OV (1 << 0) + +#define ADP1653_INDICATOR_INTENSITY_MIN 0 +#define ADP1653_INDICATOR_INTENSITY_STEP 2500 +#define ADP1653_INDICATOR_INTENSITY_MAX \ + (ADP1653_REG_OUT_SEL_ILED_MAX * ADP1653_INDICATOR_INTENSITY_STEP) +#define ADP1653_INDICATOR_INTENSITY_uA_TO_REG(a) \ + ((a) / ADP1653_INDICATOR_INTENSITY_STEP) +#define ADP1653_INDICATOR_INTENSITY_REG_TO_uA(a) \ + ((a) * ADP1653_INDICATOR_INTENSITY_STEP) + +#define ADP1653_FLASH_INTENSITY_BASE 35 +#define ADP1653_FLASH_INTENSITY_STEP 15 +#define ADP1653_FLASH_INTENSITY_MIN \ + (ADP1653_FLASH_INTENSITY_BASE \ + + ADP1653_REG_OUT_SEL_HPLED_FLASH_MIN * ADP1653_FLASH_INTENSITY_STEP) +#define ADP1653_FLASH_INTENSITY_MAX \ + (ADP1653_FLASH_INTENSITY_MIN + \ + (ADP1653_REG_OUT_SEL_HPLED_FLASH_MAX - \ + ADP1653_REG_OUT_SEL_HPLED_FLASH_MIN + 1) * \ + ADP1653_FLASH_INTENSITY_STEP) + +#define ADP1653_FLASH_INTENSITY_mA_TO_REG(a) \ + ((a) < ADP1653_FLASH_INTENSITY_BASE ? 0 : \ + (((a) - ADP1653_FLASH_INTENSITY_BASE) / ADP1653_FLASH_INTENSITY_STEP)) +#define ADP1653_FLASH_INTENSITY_REG_TO_mA(a) \ + ((a) * ADP1653_FLASH_INTENSITY_STEP + ADP1653_FLASH_INTENSITY_BASE) + +#define ADP1653_TORCH_INTENSITY_MIN \ + (ADP1653_FLASH_INTENSITY_BASE \ + + ADP1653_REG_OUT_SEL_HPLED_TORCH_MIN * ADP1653_FLASH_INTENSITY_STEP) +#define ADP1653_TORCH_INTENSITY_MAX \ + (ADP1653_TORCH_INTENSITY_MIN + \ + (ADP1653_REG_OUT_SEL_HPLED_TORCH_MAX - \ + ADP1653_REG_OUT_SEL_HPLED_TORCH_MIN + 1) * \ + ADP1653_FLASH_INTENSITY_STEP) + +struct adp1653_platform_data { + int (*power)(struct v4l2_subdev *sd, int on); + + u32 max_flash_timeout; /* flash light timeout in us */ + u32 max_flash_intensity; /* led intensity, flash mode */ + u32 max_torch_intensity; /* led intensity, torch mode */ + u32 max_indicator_intensity; /* indicator led intensity */ +}; + +#define to_adp1653_flash(sd) container_of(sd, struct adp1653_flash, subdev) + +struct adp1653_flash { + struct v4l2_subdev subdev; + struct adp1653_platform_data *platform_data; + + struct v4l2_ctrl_handler ctrls; + struct v4l2_ctrl *led_mode; + struct v4l2_ctrl *flash_timeout; + struct v4l2_ctrl *flash_intensity; + struct v4l2_ctrl *torch_intensity; + struct v4l2_ctrl *indicator_intensity; + + struct mutex power_lock; + int power_count; + int fault; +}; + +#endif /* ADP1653_H */ diff --git a/include/media/atmel-isi.h b/include/media/atmel-isi.h new file mode 100644 index 00000000000..26cece59512 --- /dev/null +++ b/include/media/atmel-isi.h @@ -0,0 +1,119 @@ +/* + * Register definitions for the Atmel Image Sensor Interface. + * + * Copyright (C) 2011 Atmel Corporation + * Josh Wu, <josh.wu@atmel.com> + * + * Based on previous work by Lars Haring, <lars.haring@atmel.com> + * and Sedji Gaouaou + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __ATMEL_ISI_H__ +#define __ATMEL_ISI_H__ + +#include <linux/types.h> + +/* ISI_V2 register offsets */ +#define ISI_CFG1 0x0000 +#define ISI_CFG2 0x0004 +#define ISI_PSIZE 0x0008 +#define ISI_PDECF 0x000c +#define ISI_Y2R_SET0 0x0010 +#define ISI_Y2R_SET1 0x0014 +#define ISI_R2Y_SET0 0x0018 +#define ISI_R2Y_SET1 0x001C +#define ISI_R2Y_SET2 0x0020 +#define ISI_CTRL 0x0024 +#define ISI_STATUS 0x0028 +#define ISI_INTEN 0x002C +#define ISI_INTDIS 0x0030 +#define ISI_INTMASK 0x0034 +#define ISI_DMA_CHER 0x0038 +#define ISI_DMA_CHDR 0x003C +#define ISI_DMA_CHSR 0x0040 +#define ISI_DMA_P_ADDR 0x0044 +#define ISI_DMA_P_CTRL 0x0048 +#define ISI_DMA_P_DSCR 0x004C +#define ISI_DMA_C_ADDR 0x0050 +#define ISI_DMA_C_CTRL 0x0054 +#define ISI_DMA_C_DSCR 0x0058 + +/* Bitfields in CFG1 */ +#define ISI_CFG1_HSYNC_POL_ACTIVE_LOW (1 << 2) +#define ISI_CFG1_VSYNC_POL_ACTIVE_LOW (1 << 3) +#define ISI_CFG1_PIXCLK_POL_ACTIVE_FALLING (1 << 4) +#define ISI_CFG1_EMB_SYNC (1 << 6) +#define ISI_CFG1_CRC_SYNC (1 << 7) +/* Constants for FRATE(ISI_V2) */ +#define ISI_CFG1_FRATE_CAPTURE_ALL (0 << 8) +#define ISI_CFG1_FRATE_DIV_2 (1 << 8) +#define ISI_CFG1_FRATE_DIV_3 (2 << 8) +#define ISI_CFG1_FRATE_DIV_4 (3 << 8) +#define ISI_CFG1_FRATE_DIV_5 (4 << 8) +#define ISI_CFG1_FRATE_DIV_6 (5 << 8) +#define ISI_CFG1_FRATE_DIV_7 (6 << 8) +#define ISI_CFG1_FRATE_DIV_8 (7 << 8) +#define ISI_CFG1_DISCR (1 << 11) +#define ISI_CFG1_FULL_MODE (1 << 12) + +/* Bitfields in CFG2 */ +#define ISI_CFG2_GRAYSCALE (1 << 13) +/* Constants for YCC_SWAP(ISI_V2) */ +#define ISI_CFG2_YCC_SWAP_DEFAULT (0 << 28) +#define ISI_CFG2_YCC_SWAP_MODE_1 (1 << 28) +#define ISI_CFG2_YCC_SWAP_MODE_2 (2 << 28) +#define ISI_CFG2_YCC_SWAP_MODE_3 (3 << 28) +#define ISI_CFG2_IM_VSIZE_OFFSET 0 +#define ISI_CFG2_IM_HSIZE_OFFSET 16 +#define ISI_CFG2_IM_VSIZE_MASK (0x7FF << ISI_CFG2_IM_VSIZE_OFFSET) +#define ISI_CFG2_IM_HSIZE_MASK (0x7FF << ISI_CFG2_IM_HSIZE_OFFSET) + +/* Bitfields in CTRL */ +/* Also using in SR(ISI_V2) */ +#define ISI_CTRL_EN (1 << 0) +#define ISI_CTRL_CDC (1 << 8) +/* Also using in SR/IER/IDR/IMR(ISI_V2) */ +#define ISI_CTRL_DIS (1 << 1) +#define ISI_CTRL_SRST (1 << 2) + +/* Bitfields in SR */ +#define ISI_SR_SIP (1 << 19) +/* Also using in SR/IER/IDR/IMR */ +#define ISI_SR_VSYNC (1 << 10) +#define ISI_SR_PXFR_DONE (1 << 16) +#define ISI_SR_CXFR_DONE (1 << 17) +#define ISI_SR_P_OVR (1 << 24) +#define ISI_SR_C_OVR (1 << 25) +#define ISI_SR_CRC_ERR (1 << 26) +#define ISI_SR_FR_OVR (1 << 27) + +/* Bitfields in DMA_C_CTRL & in DMA_P_CTRL */ +#define ISI_DMA_CTRL_FETCH (1 << 0) +#define ISI_DMA_CTRL_WB (1 << 1) +#define ISI_DMA_CTRL_IEN (1 << 2) +#define ISI_DMA_CTRL_DONE (1 << 3) + +/* Bitfields in DMA_CHSR/CHER/CHDR */ +#define ISI_DMA_CHSR_P_CH (1 << 0) +#define ISI_DMA_CHSR_C_CH (1 << 1) + +/* Definition for isi_platform_data */ +#define ISI_DATAWIDTH_8 0x01 +#define ISI_DATAWIDTH_10 0x02 + +struct isi_platform_data { + u8 has_emb_sync; + u8 emb_crc_sync; + u8 hsync_act_low; + u8 vsync_act_low; + u8 pclk_act_falling; + u8 isi_full_mode; + u32 data_width_flags; + /* Using for ISI_CFG1 */ + u32 frate; +}; + +#endif /* __ATMEL_ISI_H__ */ diff --git a/include/media/davinci/vpbe.h b/include/media/davinci/vpbe.h new file mode 100644 index 00000000000..8b11fb03798 --- /dev/null +++ b/include/media/davinci/vpbe.h @@ -0,0 +1,184 @@ +/* + * Copyright (C) 2010 Texas Instruments Inc + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation version 2. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef _VPBE_H +#define _VPBE_H + +#include <linux/videodev2.h> +#include <linux/i2c.h> + +#include <media/v4l2-dev.h> +#include <media/v4l2-ioctl.h> +#include <media/v4l2-device.h> +#include <media/davinci/vpbe_osd.h> +#include <media/davinci/vpbe_venc.h> +#include <media/davinci/vpbe_types.h> + +/* OSD configuration info */ +struct osd_config_info { + char module_name[32]; +}; + +struct vpbe_output { + struct v4l2_output output; + /* + * If output capabilities include dv_preset, list supported presets + * below + */ + char *subdev_name; + /* + * defualt_mode identifies the default timings set at the venc or + * external encoder. + */ + char *default_mode; + /* + * Fields below are used for supporting multiple modes. For example, + * LCD panel might support different modes and they are listed here. + * Similarly for supporting external encoders, lcd controller port + * requires a set of non-standard timing values to be listed here for + * each supported mode since venc is used in non-standard timing mode + * for interfacing with external encoder similar to configuring lcd + * panel timings + */ + unsigned int num_modes; + struct vpbe_enc_mode_info *modes; + /* + * Bus configuration goes here for external encoders. Some encoders + * may require multiple interface types for each of the output. For + * example, SD modes would use YCC8 where as HD mode would use YCC16. + * Not sure if this is needed on a per mode basis instead of per + * output basis. If per mode is needed, we may have to move this to + * mode_info structure + */ +}; + +/* encoder configuration info */ +struct encoder_config_info { + char module_name[32]; + /* Is this an i2c device ? */ + unsigned int is_i2c:1; + /* i2c subdevice board info */ + struct i2c_board_info board_info; +}; + +/* structure for defining vpbe display subsystem components */ +struct vpbe_config { + char module_name[32]; + /* i2c bus adapter no */ + int i2c_adapter_id; + struct osd_config_info osd; + struct encoder_config_info venc; + /* external encoder information goes here */ + int num_ext_encoders; + struct encoder_config_info *ext_encoders; + int num_outputs; + /* Order is venc outputs followed by LCD and then external encoders */ + struct vpbe_output *outputs; +}; + +struct vpbe_device; + +struct vpbe_device_ops { + /* crop cap for the display */ + int (*g_cropcap)(struct vpbe_device *vpbe_dev, + struct v4l2_cropcap *cropcap); + + /* Enumerate the outputs */ + int (*enum_outputs)(struct vpbe_device *vpbe_dev, + struct v4l2_output *output); + + /* Set output to the given index */ + int (*set_output)(struct vpbe_device *vpbe_dev, + int index); + + /* Get current output */ + unsigned int (*get_output)(struct vpbe_device *vpbe_dev); + + /* Set DV preset at current output */ + int (*s_dv_preset)(struct vpbe_device *vpbe_dev, + struct v4l2_dv_preset *dv_preset); + + /* Get DV presets supported at the output */ + int (*g_dv_preset)(struct vpbe_device *vpbe_dev, + struct v4l2_dv_preset *dv_preset); + + /* Enumerate the DV Presets supported at the output */ + int (*enum_dv_presets)(struct vpbe_device *vpbe_dev, + struct v4l2_dv_enum_preset *preset_info); + + /* Set std at the output */ + int (*s_std)(struct vpbe_device *vpbe_dev, v4l2_std_id *std_id); + + /* Get the current std at the output */ + int (*g_std)(struct vpbe_device *vpbe_dev, v4l2_std_id *std_id); + + /* initialize the device */ + int (*initialize)(struct device *dev, struct vpbe_device *vpbe_dev); + + /* De-initialize the device */ + void (*deinitialize)(struct device *dev, struct vpbe_device *vpbe_dev); + + /* Get the current mode info */ + int (*get_mode_info)(struct vpbe_device *vpbe_dev, + struct vpbe_enc_mode_info*); + + /* + * Set the current mode in the encoder. Alternate way of setting + * standard or DV preset or custom timings in the encoder + */ + int (*set_mode)(struct vpbe_device *vpbe_dev, + struct vpbe_enc_mode_info*); + /* Power management operations */ + int (*suspend)(struct vpbe_device *vpbe_dev); + int (*resume)(struct vpbe_device *vpbe_dev); +}; + +/* struct for vpbe device */ +struct vpbe_device { + /* V4l2 device */ + struct v4l2_device v4l2_dev; + /* vpbe dispay controller cfg */ + struct vpbe_config *cfg; + /* parent device */ + struct device *pdev; + /* external encoder v4l2 sub devices */ + struct v4l2_subdev **encoders; + /* current encoder index */ + int current_sd_index; + struct mutex lock; + /* device initialized */ + int initialized; + /* vpbe dac clock */ + struct clk *dac_clk; + /* osd_device pointer */ + struct osd_state *osd_device; + /* + * fields below are accessed by users of vpbe_device. Not the + * ones above + */ + + /* current output */ + int current_out_index; + /* lock used by caller to do atomic operation on vpbe device */ + /* current timings set in the controller */ + struct vpbe_enc_mode_info current_timings; + /* venc sub device */ + struct v4l2_subdev *venc; + /* device operations below */ + struct vpbe_device_ops ops; +}; + +#endif diff --git a/include/media/davinci/vpbe_display.h b/include/media/davinci/vpbe_display.h new file mode 100644 index 00000000000..dbf6b37682c --- /dev/null +++ b/include/media/davinci/vpbe_display.h @@ -0,0 +1,147 @@ +/* + * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +#ifndef VPBE_DISPLAY_H +#define VPBE_DISPLAY_H + +/* Header files */ +#include <linux/videodev2.h> +#include <media/v4l2-common.h> +#include <media/videobuf-dma-contig.h> +#include <media/davinci/vpbe_types.h> +#include <media/davinci/vpbe_osd.h> +#include <media/davinci/vpbe.h> + +#define VPBE_DISPLAY_MAX_DEVICES 2 + +enum vpbe_display_device_id { + VPBE_DISPLAY_DEVICE_0, + VPBE_DISPLAY_DEVICE_1 +}; + +#define VPBE_DISPLAY_DRV_NAME "vpbe-display" + +#define VPBE_DISPLAY_MAJOR_RELEASE 1 +#define VPBE_DISPLAY_MINOR_RELEASE 0 +#define VPBE_DISPLAY_BUILD 1 +#define VPBE_DISPLAY_VERSION_CODE ((VPBE_DISPLAY_MAJOR_RELEASE << 16) | \ + (VPBE_DISPLAY_MINOR_RELEASE << 8) | \ + VPBE_DISPLAY_BUILD) + +#define VPBE_DISPLAY_VALID_FIELD(field) ((V4L2_FIELD_NONE == field) || \ + (V4L2_FIELD_ANY == field) || (V4L2_FIELD_INTERLACED == field)) + +/* Exp ratio numerator and denominator constants */ +#define VPBE_DISPLAY_H_EXP_RATIO_N 9 +#define VPBE_DISPLAY_H_EXP_RATIO_D 8 +#define VPBE_DISPLAY_V_EXP_RATIO_N 6 +#define VPBE_DISPLAY_V_EXP_RATIO_D 5 + +/* Zoom multiplication factor */ +#define VPBE_DISPLAY_ZOOM_4X 4 +#define VPBE_DISPLAY_ZOOM_2X 2 + +/* Structures */ +struct display_layer_info { + int enable; + /* Layer ID used by Display Manager */ + enum osd_layer id; + struct osd_layer_config config; + enum osd_zoom_factor h_zoom; + enum osd_zoom_factor v_zoom; + enum osd_h_exp_ratio h_exp; + enum osd_v_exp_ratio v_exp; +}; + +/* vpbe display object structure */ +struct vpbe_layer { + /* number of buffers in fbuffers */ + unsigned int numbuffers; + /* Pointer to the vpbe_display */ + struct vpbe_display *disp_dev; + /* Pointer pointing to current v4l2_buffer */ + struct videobuf_buffer *cur_frm; + /* Pointer pointing to next v4l2_buffer */ + struct videobuf_buffer *next_frm; + /* videobuf specific parameters + * Buffer queue used in video-buf + */ + struct videobuf_queue buffer_queue; + /* Queue of filled frames */ + struct list_head dma_queue; + /* Used in video-buf */ + spinlock_t irqlock; + /* V4l2 specific parameters */ + /* Identifies video device for this layer */ + struct video_device video_dev; + /* This field keeps track of type of buffer exchange mechanism user + * has selected + */ + enum v4l2_memory memory; + /* Used to keep track of state of the priority */ + struct v4l2_prio_state prio; + /* Used to store pixel format */ + struct v4l2_pix_format pix_fmt; + enum v4l2_field buf_field; + /* Video layer configuration params */ + struct display_layer_info layer_info; + /* vpbe specific parameters + * enable window for display + */ + unsigned char window_enable; + /* number of open instances of the layer */ + unsigned int usrs; + /* number of users performing IO */ + unsigned int io_usrs; + /* Indicates id of the field which is being displayed */ + unsigned int field_id; + /* Indicates whether streaming started */ + unsigned char started; + /* Identifies device object */ + enum vpbe_display_device_id device_id; + /* facilitation of ioctl ops lock by v4l2*/ + struct mutex opslock; + u8 layer_first_int; +}; + +/* vpbe device structure */ +struct vpbe_display { + /* layer specific parameters */ + /* lock for isr updates to buf layers*/ + spinlock_t dma_queue_lock; + /* C-Plane offset from start of y-plane */ + unsigned int cbcr_ofst; + struct vpbe_layer *dev[VPBE_DISPLAY_MAX_DEVICES]; + struct vpbe_device *vpbe_dev; + struct osd_state *osd_device; +}; + +/* File handle structure */ +struct vpbe_fh { + /* vpbe device structure */ + struct vpbe_display *disp_dev; + /* pointer to layer object for opened device */ + struct vpbe_layer *layer; + /* Indicates whether this file handle is doing IO */ + unsigned char io_allowed; + /* Used to keep track priority of this instance */ + enum v4l2_priority prio; +}; + +struct buf_config_params { + unsigned char min_numbuffers; + unsigned char numbuffers[VPBE_DISPLAY_MAX_DEVICES]; + unsigned int min_bufsize[VPBE_DISPLAY_MAX_DEVICES]; + unsigned int layer_bufsize[VPBE_DISPLAY_MAX_DEVICES]; +}; + +#endif /* VPBE_DISPLAY_H */ diff --git a/include/media/davinci/vpbe_osd.h b/include/media/davinci/vpbe_osd.h new file mode 100644 index 00000000000..d7e397a444e --- /dev/null +++ b/include/media/davinci/vpbe_osd.h @@ -0,0 +1,394 @@ +/* + * Copyright (C) 2007-2009 Texas Instruments Inc + * Copyright (C) 2007 MontaVista Software, Inc. + * + * Andy Lowe (alowe@mvista.com), MontaVista Software + * - Initial version + * Murali Karicheri (mkaricheri@gmail.com), Texas Instruments Ltd. + * - ported to sub device interface + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation version 2.. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ +#ifndef _OSD_H +#define _OSD_H + +#include <media/davinci/vpbe_types.h> + +#define VPBE_OSD_SUBDEV_NAME "vpbe-osd" + +/** + * enum osd_layer + * @WIN_OSD0: On-Screen Display Window 0 + * @WIN_VID0: Video Window 0 + * @WIN_OSD1: On-Screen Display Window 1 + * @WIN_VID1: Video Window 1 + * + * Description: + * An enumeration of the osd display layers. + */ +enum osd_layer { + WIN_OSD0, + WIN_VID0, + WIN_OSD1, + WIN_VID1, +}; + +/** + * enum osd_win_layer + * @OSDWIN_OSD0: On-Screen Display Window 0 + * @OSDWIN_OSD1: On-Screen Display Window 1 + * + * Description: + * An enumeration of the OSD Window layers. + */ +enum osd_win_layer { + OSDWIN_OSD0, + OSDWIN_OSD1, +}; + +/** + * enum osd_pix_format + * @PIXFMT_1BPP: 1-bit-per-pixel bitmap + * @PIXFMT_2BPP: 2-bits-per-pixel bitmap + * @PIXFMT_4BPP: 4-bits-per-pixel bitmap + * @PIXFMT_8BPP: 8-bits-per-pixel bitmap + * @PIXFMT_RGB565: 16-bits-per-pixel RGB565 + * @PIXFMT_YCbCrI: YUV 4:2:2 + * @PIXFMT_RGB888: 24-bits-per-pixel RGB888 + * @PIXFMT_YCrCbI: YUV 4:2:2 with chroma swap + * @PIXFMT_NV12: YUV 4:2:0 planar + * @PIXFMT_OSD_ATTR: OSD Attribute Window pixel format (4bpp) + * + * Description: + * An enumeration of the DaVinci pixel formats. + */ +enum osd_pix_format { + PIXFMT_1BPP = 0, + PIXFMT_2BPP, + PIXFMT_4BPP, + PIXFMT_8BPP, + PIXFMT_RGB565, + PIXFMT_YCbCrI, + PIXFMT_RGB888, + PIXFMT_YCrCbI, + PIXFMT_NV12, + PIXFMT_OSD_ATTR, +}; + +/** + * enum osd_h_exp_ratio + * @H_EXP_OFF: no expansion (1/1) + * @H_EXP_9_OVER_8: 9/8 expansion ratio + * @H_EXP_3_OVER_2: 3/2 expansion ratio + * + * Description: + * An enumeration of the available horizontal expansion ratios. + */ +enum osd_h_exp_ratio { + H_EXP_OFF, + H_EXP_9_OVER_8, + H_EXP_3_OVER_2, +}; + +/** + * enum osd_v_exp_ratio + * @V_EXP_OFF: no expansion (1/1) + * @V_EXP_6_OVER_5: 6/5 expansion ratio + * + * Description: + * An enumeration of the available vertical expansion ratios. + */ +enum osd_v_exp_ratio { + V_EXP_OFF, + V_EXP_6_OVER_5, +}; + +/** + * enum osd_zoom_factor + * @ZOOM_X1: no zoom (x1) + * @ZOOM_X2: x2 zoom + * @ZOOM_X4: x4 zoom + * + * Description: + * An enumeration of the available zoom factors. + */ +enum osd_zoom_factor { + ZOOM_X1, + ZOOM_X2, + ZOOM_X4, +}; + +/** + * enum osd_clut + * @ROM_CLUT: ROM CLUT + * @RAM_CLUT: RAM CLUT + * + * Description: + * An enumeration of the available Color Lookup Tables (CLUTs). + */ +enum osd_clut { + ROM_CLUT, + RAM_CLUT, +}; + +/** + * enum osd_rom_clut + * @ROM_CLUT0: Macintosh CLUT + * @ROM_CLUT1: CLUT from DM270 and prior devices + * + * Description: + * An enumeration of the ROM Color Lookup Table (CLUT) options. + */ +enum osd_rom_clut { + ROM_CLUT0, + ROM_CLUT1, +}; + +/** + * enum osd_blending_factor + * @OSD_0_VID_8: OSD pixels are fully transparent + * @OSD_1_VID_7: OSD pixels contribute 1/8, video pixels contribute 7/8 + * @OSD_2_VID_6: OSD pixels contribute 2/8, video pixels contribute 6/8 + * @OSD_3_VID_5: OSD pixels contribute 3/8, video pixels contribute 5/8 + * @OSD_4_VID_4: OSD pixels contribute 4/8, video pixels contribute 4/8 + * @OSD_5_VID_3: OSD pixels contribute 5/8, video pixels contribute 3/8 + * @OSD_6_VID_2: OSD pixels contribute 6/8, video pixels contribute 2/8 + * @OSD_8_VID_0: OSD pixels are fully opaque + * + * Description: + * An enumeration of the DaVinci pixel blending factor options. + */ +enum osd_blending_factor { + OSD_0_VID_8, + OSD_1_VID_7, + OSD_2_VID_6, + OSD_3_VID_5, + OSD_4_VID_4, + OSD_5_VID_3, + OSD_6_VID_2, + OSD_8_VID_0, +}; + +/** + * enum osd_blink_interval + * @BLINK_X1: blink interval is 1 vertical refresh cycle + * @BLINK_X2: blink interval is 2 vertical refresh cycles + * @BLINK_X3: blink interval is 3 vertical refresh cycles + * @BLINK_X4: blink interval is 4 vertical refresh cycles + * + * Description: + * An enumeration of the DaVinci pixel blinking interval options. + */ +enum osd_blink_interval { + BLINK_X1, + BLINK_X2, + BLINK_X3, + BLINK_X4, +}; + +/** + * enum osd_cursor_h_width + * @H_WIDTH_1: horizontal line width is 1 pixel + * @H_WIDTH_4: horizontal line width is 4 pixels + * @H_WIDTH_8: horizontal line width is 8 pixels + * @H_WIDTH_12: horizontal line width is 12 pixels + * @H_WIDTH_16: horizontal line width is 16 pixels + * @H_WIDTH_20: horizontal line width is 20 pixels + * @H_WIDTH_24: horizontal line width is 24 pixels + * @H_WIDTH_28: horizontal line width is 28 pixels + */ +enum osd_cursor_h_width { + H_WIDTH_1, + H_WIDTH_4, + H_WIDTH_8, + H_WIDTH_12, + H_WIDTH_16, + H_WIDTH_20, + H_WIDTH_24, + H_WIDTH_28, +}; + +/** + * enum davinci_cursor_v_width + * @V_WIDTH_1: vertical line width is 1 line + * @V_WIDTH_2: vertical line width is 2 lines + * @V_WIDTH_4: vertical line width is 4 lines + * @V_WIDTH_6: vertical line width is 6 lines + * @V_WIDTH_8: vertical line width is 8 lines + * @V_WIDTH_10: vertical line width is 10 lines + * @V_WIDTH_12: vertical line width is 12 lines + * @V_WIDTH_14: vertical line width is 14 lines + */ +enum osd_cursor_v_width { + V_WIDTH_1, + V_WIDTH_2, + V_WIDTH_4, + V_WIDTH_6, + V_WIDTH_8, + V_WIDTH_10, + V_WIDTH_12, + V_WIDTH_14, +}; + +/** + * struct osd_cursor_config + * @xsize: horizontal size in pixels + * @ysize: vertical size in lines + * @xpos: horizontal offset in pixels from the left edge of the display + * @ypos: vertical offset in lines from the top of the display + * @interlaced: Non-zero if the display is interlaced, or zero otherwise + * @h_width: horizontal line width + * @v_width: vertical line width + * @clut: the CLUT selector (ROM or RAM) for the cursor color + * @clut_index: an index into the CLUT for the cursor color + * + * Description: + * A structure describing the configuration parameters of the hardware + * rectangular cursor. + */ +struct osd_cursor_config { + unsigned xsize; + unsigned ysize; + unsigned xpos; + unsigned ypos; + int interlaced; + enum osd_cursor_h_width h_width; + enum osd_cursor_v_width v_width; + enum osd_clut clut; + unsigned char clut_index; +}; + +/** + * struct osd_layer_config + * @pixfmt: pixel format + * @line_length: offset in bytes between start of each line in memory + * @xsize: number of horizontal pixels displayed per line + * @ysize: number of lines displayed + * @xpos: horizontal offset in pixels from the left edge of the display + * @ypos: vertical offset in lines from the top of the display + * @interlaced: Non-zero if the display is interlaced, or zero otherwise + * + * Description: + * A structure describing the configuration parameters of an On-Screen Display + * (OSD) or video layer related to how the image is stored in memory. + * @line_length must be a multiple of the cache line size (32 bytes). + */ +struct osd_layer_config { + enum osd_pix_format pixfmt; + unsigned line_length; + unsigned xsize; + unsigned ysize; + unsigned xpos; + unsigned ypos; + int interlaced; +}; + +/* parameters that apply on a per-window (OSD or video) basis */ +struct osd_window_state { + int is_allocated; + int is_enabled; + unsigned long fb_base_phys; + enum osd_zoom_factor h_zoom; + enum osd_zoom_factor v_zoom; + struct osd_layer_config lconfig; +}; + +/* parameters that apply on a per-OSD-window basis */ +struct osd_osdwin_state { + enum osd_clut clut; + enum osd_blending_factor blend; + int colorkey_blending; + unsigned colorkey; + int rec601_attenuation; + /* index is pixel value */ + unsigned char palette_map[16]; +}; + +/* hardware rectangular cursor parameters */ +struct osd_cursor_state { + int is_enabled; + struct osd_cursor_config config; +}; + +struct osd_state; + +struct vpbe_osd_ops { + int (*initialize)(struct osd_state *sd); + int (*request_layer)(struct osd_state *sd, enum osd_layer layer); + void (*release_layer)(struct osd_state *sd, enum osd_layer layer); + int (*enable_layer)(struct osd_state *sd, enum osd_layer layer, + int otherwin); + void (*disable_layer)(struct osd_state *sd, enum osd_layer layer); + int (*set_layer_config)(struct osd_state *sd, enum osd_layer layer, + struct osd_layer_config *lconfig); + void (*get_layer_config)(struct osd_state *sd, enum osd_layer layer, + struct osd_layer_config *lconfig); + void (*start_layer)(struct osd_state *sd, enum osd_layer layer, + unsigned long fb_base_phys, + unsigned long cbcr_ofst); + void (*set_left_margin)(struct osd_state *sd, u32 val); + void (*set_top_margin)(struct osd_state *sd, u32 val); + void (*set_interpolation_filter)(struct osd_state *sd, int filter); + int (*set_vid_expansion)(struct osd_state *sd, + enum osd_h_exp_ratio h_exp, + enum osd_v_exp_ratio v_exp); + void (*get_vid_expansion)(struct osd_state *sd, + enum osd_h_exp_ratio *h_exp, + enum osd_v_exp_ratio *v_exp); + void (*set_zoom)(struct osd_state *sd, enum osd_layer layer, + enum osd_zoom_factor h_zoom, + enum osd_zoom_factor v_zoom); +}; + +struct osd_state { + enum vpbe_version vpbe_type; + spinlock_t lock; + struct device *dev; + dma_addr_t osd_base_phys; + unsigned long osd_base; + unsigned long osd_size; + /* 1-->the isr will toggle the VID0 ping-pong buffer */ + int pingpong; + int interpolation_filter; + int field_inversion; + enum osd_h_exp_ratio osd_h_exp; + enum osd_v_exp_ratio osd_v_exp; + enum osd_h_exp_ratio vid_h_exp; + enum osd_v_exp_ratio vid_v_exp; + enum osd_clut backg_clut; + unsigned backg_clut_index; + enum osd_rom_clut rom_clut; + int is_blinking; + /* attribute window blinking enabled */ + enum osd_blink_interval blink; + /* YCbCrI or YCrCbI */ + enum osd_pix_format yc_pixfmt; + /* columns are Y, Cb, Cr */ + unsigned char clut_ram[256][3]; + struct osd_cursor_state cursor; + /* OSD0, VID0, OSD1, VID1 */ + struct osd_window_state win[4]; + /* OSD0, OSD1 */ + struct osd_osdwin_state osdwin[2]; + /* OSD device Operations */ + struct vpbe_osd_ops ops; +}; + +struct osd_platform_data { + enum vpbe_version vpbe_type; + int field_inv_wa_enable; +}; + +#endif diff --git a/include/media/davinci/vpbe_types.h b/include/media/davinci/vpbe_types.h new file mode 100644 index 00000000000..727f55170e4 --- /dev/null +++ b/include/media/davinci/vpbe_types.h @@ -0,0 +1,91 @@ +/* + * Copyright (C) 2010 Texas Instruments Inc + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation version 2. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef _VPBE_TYPES_H +#define _VPBE_TYPES_H + +enum vpbe_version { + VPBE_VERSION_1 = 1, + VPBE_VERSION_2, + VPBE_VERSION_3, +}; + +/* vpbe_timing_type - Timing types used in vpbe device */ +enum vpbe_enc_timings_type { + VPBE_ENC_STD = 0x1, + VPBE_ENC_DV_PRESET = 0x2, + VPBE_ENC_CUSTOM_TIMINGS = 0x4, + /* Used when set timings through FB device interface */ + VPBE_ENC_TIMINGS_INVALID = 0x8, +}; + +union vpbe_timings { + v4l2_std_id std_id; + unsigned int dv_preset; +}; + +/* + * struct vpbe_enc_mode_info + * @name: ptr to name string of the standard, "NTSC", "PAL" etc + * @std: standard or non-standard mode. 1 - standard, 0 - nonstandard + * @interlaced: 1 - interlaced, 0 - non interlaced/progressive + * @xres: x or horizontal resolution of the display + * @yres: y or vertical resolution of the display + * @fps: frame per second + * @left_margin: left margin of the display + * @right_margin: right margin of the display + * @upper_margin: upper margin of the display + * @lower_margin: lower margin of the display + * @hsync_len: h-sync length + * @vsync_len: v-sync length + * @flags: bit field: bit usage is documented below + * + * Description: + * Structure holding timing and resolution information of a standard. + * Used by vpbe_device to set required non-standard timing in the + * venc when lcd controller output is connected to a external encoder. + * A table of timings is maintained in vpbe device to set this in + * venc when external encoder is connected to lcd controller output. + * Encoder may provide a g_dv_timings() API to override these values + * as needed. + * + * Notes + * ------ + * if_type should be used only by encoder manager and encoder. + * flags usage + * b0 (LSB) - hsync polarity, 0 - negative, 1 - positive + * b1 - vsync polarity, 0 - negative, 1 - positive + * b2 - field id polarity, 0 - negative, 1 - positive + */ +struct vpbe_enc_mode_info { + unsigned char *name; + enum vpbe_enc_timings_type timings_type; + union vpbe_timings timings; + unsigned int interlaced; + unsigned int xres; + unsigned int yres; + struct v4l2_fract aspect; + struct v4l2_fract fps; + unsigned int left_margin; + unsigned int right_margin; + unsigned int upper_margin; + unsigned int lower_margin; + unsigned int hsync_len; + unsigned int vsync_len; + unsigned int flags; +}; + +#endif diff --git a/include/media/davinci/vpbe_venc.h b/include/media/davinci/vpbe_venc.h new file mode 100644 index 00000000000..426c205831a --- /dev/null +++ b/include/media/davinci/vpbe_venc.h @@ -0,0 +1,45 @@ +/* + * Copyright (C) 2010 Texas Instruments Inc + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation version 2. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef _VPBE_VENC_H +#define _VPBE_VENC_H + +#include <media/v4l2-subdev.h> +#include <media/davinci/vpbe_types.h> + +#define VPBE_VENC_SUBDEV_NAME "vpbe-venc" + +/* venc events */ +#define VENC_END_OF_FRAME BIT(0) +#define VENC_FIRST_FIELD BIT(1) +#define VENC_SECOND_FIELD BIT(2) + +struct venc_platform_data { + enum vpbe_version venc_type; + int (*setup_clock)(enum vpbe_enc_timings_type type, + unsigned int mode); + /* Number of LCD outputs supported */ + int num_lcd_outputs; +}; + +enum venc_ioctls { + VENC_GET_FLD = 1, +}; + +/* exported functions */ +struct v4l2_subdev *venc_sub_dev_init(struct v4l2_device *v4l2_dev, + const char *venc_name); +#endif diff --git a/include/media/mmp-camera.h b/include/media/mmp-camera.h new file mode 100644 index 00000000000..7611963a257 --- /dev/null +++ b/include/media/mmp-camera.h @@ -0,0 +1,9 @@ +/* + * Information for the Marvell Armada MMP camera + */ + +struct mmp_camera_platform_data { + struct platform_device *i2c_device; + int sensor_power_gpio; + int sensor_reset_gpio; +}; diff --git a/include/media/ov7670.h b/include/media/ov7670.h new file mode 100644 index 00000000000..b133bc12303 --- /dev/null +++ b/include/media/ov7670.h @@ -0,0 +1,20 @@ +/* + * A V4L2 driver for OmniVision OV7670 cameras. + * + * Copyright 2010 One Laptop Per Child + * + * This file may be distributed under the terms of the GNU General + * Public License, version 2. + */ + +#ifndef __OV7670_H +#define __OV7670_H + +struct ov7670_config { + int min_width; /* Filter out smaller sizes */ + int min_height; /* Filter out smaller sizes */ + int clock_speed; /* External clock speed (MHz) */ + bool use_smbus; /* Use smbus I/O instead of I2C */ +}; + +#endif diff --git a/include/media/rc-core.h b/include/media/rc-core.h index 60536c74c1e..b1f19b77ecd 100644 --- a/include/media/rc-core.h +++ b/include/media/rc-core.h @@ -117,7 +117,7 @@ struct rc_dev { int (*s_tx_carrier)(struct rc_dev *dev, u32 carrier); int (*s_tx_duty_cycle)(struct rc_dev *dev, u32 duty_cycle); int (*s_rx_carrier_range)(struct rc_dev *dev, u32 min, u32 max); - int (*tx_ir)(struct rc_dev *dev, int *txbuf, u32 n); + int (*tx_ir)(struct rc_dev *dev, unsigned *txbuf, unsigned n); void (*s_idle)(struct rc_dev *dev, bool enable); int (*s_learning_mode)(struct rc_dev *dev, int enable); int (*s_carrier_report) (struct rc_dev *dev, int enable); diff --git a/include/media/rc-map.h b/include/media/rc-map.h index 4e1409ec261..17c9759ae77 100644 --- a/include/media/rc-map.h +++ b/include/media/rc-map.h @@ -18,12 +18,13 @@ #define RC_TYPE_JVC (1 << 3) /* JVC protocol */ #define RC_TYPE_SONY (1 << 4) /* Sony12/15/20 protocol */ #define RC_TYPE_RC5_SZ (1 << 5) /* RC5 variant used by Streamzap */ +#define RC_TYPE_MCE_KBD (1 << 29) /* RC6-ish MCE keyboard/mouse */ #define RC_TYPE_LIRC (1 << 30) /* Pass raw IR to lirc userspace */ #define RC_TYPE_OTHER (1u << 31) #define RC_TYPE_ALL (RC_TYPE_RC5 | RC_TYPE_NEC | RC_TYPE_RC6 | \ RC_TYPE_JVC | RC_TYPE_SONY | RC_TYPE_LIRC | \ - RC_TYPE_RC5_SZ | RC_TYPE_OTHER) + RC_TYPE_RC5_SZ | RC_TYPE_MCE_KBD | RC_TYPE_OTHER) struct rc_map_table { u32 scancode; diff --git a/include/media/sh_mobile_ceu.h b/include/media/sh_mobile_ceu.h index 80346a6d28a..48413b410f1 100644 --- a/include/media/sh_mobile_ceu.h +++ b/include/media/sh_mobile_ceu.h @@ -7,10 +7,18 @@ #define SH_CEU_FLAG_VSYNC_LOW (1 << 3) /* default High if possible */ struct device; +struct resource; + +struct sh_mobile_ceu_companion { + u32 num_resources; + struct resource *resource; + int id; + void *platform_data; +}; struct sh_mobile_ceu_info { unsigned long flags; - struct device *csi2_dev; + struct sh_mobile_ceu_companion *csi2; }; #endif /* __ASM_SH_MOBILE_CEU_H__ */ diff --git a/include/media/sh_mobile_csi2.h b/include/media/sh_mobile_csi2.h index 4d261517446..c586c4f7f16 100644 --- a/include/media/sh_mobile_csi2.h +++ b/include/media/sh_mobile_csi2.h @@ -11,6 +11,8 @@ #ifndef SH_MIPI_CSI #define SH_MIPI_CSI +#include <linux/list.h> + enum sh_csi2_phy { SH_CSI2_PHY_MAIN, SH_CSI2_PHY_SUB, @@ -33,14 +35,14 @@ struct sh_csi2_client_config { struct platform_device *pdev; /* client platform device */ }; +struct v4l2_device; + struct sh_csi2_pdata { enum sh_csi2_type type; unsigned int flags; struct sh_csi2_client_config *clients; int num_clients; + struct v4l2_device *v4l2_dev; }; -struct device; -struct v4l2_device; - #endif diff --git a/include/media/soc_camera.h b/include/media/soc_camera.h index 238bd334fd8..7582952dcea 100644 --- a/include/media/soc_camera.h +++ b/include/media/soc_camera.h @@ -20,14 +20,15 @@ #include <media/videobuf2-core.h> #include <media/v4l2-device.h> -extern struct bus_type soc_camera_bus_type; - struct file; +struct soc_camera_link; struct soc_camera_device { - struct list_head list; - struct device dev; + struct list_head list; /* list of all registered devices */ + struct soc_camera_link *link; struct device *pdev; /* Platform device */ + struct device *parent; /* Camera host device */ + struct device *control; /* E.g., the i2c client */ s32 user_width; s32 user_height; u32 bytesperline; /* for padding, zero if unused */ @@ -66,8 +67,6 @@ struct soc_camera_host_ops { struct module *owner; int (*add)(struct soc_camera_device *); void (*remove)(struct soc_camera_device *); - int (*suspend)(struct soc_camera_device *, pm_message_t); - int (*resume)(struct soc_camera_device *); /* * .get_formats() is called for each client device format, but * .put_formats() is only called once. Further, if any of the calls to @@ -109,12 +108,6 @@ struct soc_camera_host_ops { #define SOCAM_SENSOR_INVERT_HSYNC (1 << 2) #define SOCAM_SENSOR_INVERT_VSYNC (1 << 3) #define SOCAM_SENSOR_INVERT_DATA (1 << 4) -#define SOCAM_MIPI_1LANE (1 << 5) -#define SOCAM_MIPI_2LANE (1 << 6) -#define SOCAM_MIPI_3LANE (1 << 7) -#define SOCAM_MIPI_4LANE (1 << 8) -#define SOCAM_MIPI (SOCAM_MIPI_1LANE | SOCAM_MIPI_2LANE | \ - SOCAM_MIPI_3LANE | SOCAM_MIPI_4LANE) struct i2c_board_info; struct regulator_bulk_data; @@ -134,11 +127,11 @@ struct soc_camera_link { int num_regulators; /* - * For non-I2C devices platform platform has to provide methods to - * add a device to the system and to remove + * For non-I2C devices platform has to provide methods to add a device + * to the system and to remove it */ - int (*add_device)(struct soc_camera_link *, struct device *); - void (*del_device)(struct soc_camera_link *); + int (*add_device)(struct soc_camera_device *); + void (*del_device)(struct soc_camera_device *); /* Optional callbacks to power on or off and reset the sensor */ int (*power)(struct device *, int); int (*reset)(struct device *); @@ -152,12 +145,6 @@ struct soc_camera_link { void (*free_bus)(struct soc_camera_link *); }; -static inline struct soc_camera_device *to_soc_camera_dev( - const struct device *dev) -{ - return container_of(dev, struct soc_camera_device, dev); -} - static inline struct soc_camera_host *to_soc_camera_host( const struct device *dev) { @@ -169,13 +156,13 @@ static inline struct soc_camera_host *to_soc_camera_host( static inline struct soc_camera_link *to_soc_camera_link( const struct soc_camera_device *icd) { - return icd->dev.platform_data; + return icd->link; } static inline struct device *to_soc_camera_control( const struct soc_camera_device *icd) { - return dev_get_drvdata(&icd->dev); + return icd->control; } static inline struct v4l2_subdev *soc_camera_to_subdev( @@ -207,11 +194,8 @@ struct soc_camera_format_xlate { }; struct soc_camera_ops { - int (*suspend)(struct soc_camera_device *, pm_message_t state); - int (*resume)(struct soc_camera_device *); unsigned long (*query_bus_param)(struct soc_camera_device *); int (*set_bus_param)(struct soc_camera_device *, unsigned long); - int (*enum_input)(struct soc_camera_device *, struct v4l2_input *); const struct v4l2_queryctrl *controls; int num_controls; }; @@ -270,6 +254,12 @@ static inline struct v4l2_queryctrl const *soc_camera_find_qctrl( #define SOCAM_PCLK_SAMPLE_FALLING (1 << 13) #define SOCAM_DATA_ACTIVE_HIGH (1 << 14) #define SOCAM_DATA_ACTIVE_LOW (1 << 15) +#define SOCAM_MIPI_1LANE (1 << 16) +#define SOCAM_MIPI_2LANE (1 << 17) +#define SOCAM_MIPI_3LANE (1 << 18) +#define SOCAM_MIPI_4LANE (1 << 19) +#define SOCAM_MIPI (SOCAM_MIPI_1LANE | SOCAM_MIPI_2LANE | \ + SOCAM_MIPI_3LANE | SOCAM_MIPI_4LANE) #define SOCAM_DATAWIDTH_MASK (SOCAM_DATAWIDTH_4 | SOCAM_DATAWIDTH_8 | \ SOCAM_DATAWIDTH_9 | SOCAM_DATAWIDTH_10 | \ diff --git a/include/media/soc_camera_platform.h b/include/media/soc_camera_platform.h index 6d7a4fd00fc..74f0fa15ca4 100644 --- a/include/media/soc_camera_platform.h +++ b/include/media/soc_camera_platform.h @@ -21,7 +21,7 @@ struct soc_camera_platform_info { unsigned long format_depth; struct v4l2_mbus_framefmt format; unsigned long bus_param; - struct device *dev; + struct soc_camera_device *icd; int (*set_capture)(struct soc_camera_platform_info *info, int enable); }; @@ -30,8 +30,7 @@ static inline void soc_camera_platform_release(struct platform_device **pdev) *pdev = NULL; } -static inline int soc_camera_platform_add(const struct soc_camera_link *icl, - struct device *dev, +static inline int soc_camera_platform_add(struct soc_camera_device *icd, struct platform_device **pdev, struct soc_camera_link *plink, void (*release)(struct device *dev), @@ -40,7 +39,7 @@ static inline int soc_camera_platform_add(const struct soc_camera_link *icl, struct soc_camera_platform_info *info = plink->priv; int ret; - if (icl != plink) + if (icd->link != plink) return -ENODEV; if (*pdev) @@ -50,7 +49,7 @@ static inline int soc_camera_platform_add(const struct soc_camera_link *icl, if (!*pdev) return -ENOMEM; - info->dev = dev; + info->icd = icd; (*pdev)->dev.platform_data = info; (*pdev)->dev.release = release; @@ -59,17 +58,17 @@ static inline int soc_camera_platform_add(const struct soc_camera_link *icl, if (ret < 0) { platform_device_put(*pdev); *pdev = NULL; - info->dev = NULL; + info->icd = NULL; } return ret; } -static inline void soc_camera_platform_del(const struct soc_camera_link *icl, +static inline void soc_camera_platform_del(const struct soc_camera_device *icd, struct platform_device *pdev, const struct soc_camera_link *plink) { - if (icl != plink || !pdev) + if (icd->link != plink || !pdev) return; platform_device_unregister(pdev); diff --git a/include/media/timb_radio.h b/include/media/timb_radio.h index a59a84854dc..a40a6a348d2 100644 --- a/include/media/timb_radio.h +++ b/include/media/timb_radio.h @@ -23,13 +23,8 @@ struct timb_radio_platform_data { int i2c_adapter; /* I2C adapter where the tuner and dsp are attached */ - struct { - struct i2c_board_info *info; - } tuner; - struct { - const char *module_name; - struct i2c_board_info *info; - } dsp; + struct i2c_board_info *tuner; + struct i2c_board_info *dsp; }; #endif diff --git a/include/media/tuner.h b/include/media/tuner.h index 963e3347183..89c290b69a5 100644 --- a/include/media/tuner.h +++ b/include/media/tuner.h @@ -127,6 +127,8 @@ #define TUNER_PHILIPS_FMD1216MEX_MK3 78 #define TUNER_PHILIPS_FM1216MK5 79 #define TUNER_PHILIPS_FQ1216LME_MK3 80 /* Active loopthrough, no FM */ +#define TUNER_XC4000 81 /* Xceive Silicon Tuner */ + #define TUNER_PARTSNIC_PTI_5NF05 81 #define TUNER_PHILIPS_CU1216L 82 #define TUNER_NXP_TDA18271 83 diff --git a/include/media/v4l2-chip-ident.h b/include/media/v4l2-chip-ident.h index b3edb67a831..63fd9d3db29 100644 --- a/include/media/v4l2-chip-ident.h +++ b/include/media/v4l2-chip-ident.h @@ -76,6 +76,7 @@ enum { V4L2_IDENT_OV6650 = 258, V4L2_IDENT_OV2640 = 259, V4L2_IDENT_OV9740 = 260, + V4L2_IDENT_OV5642 = 261, /* module saa7146: reserved range 300-309 */ V4L2_IDENT_SAA7146 = 300, @@ -185,8 +186,9 @@ enum { /* module wm8775: just ident 8775 */ V4L2_IDENT_WM8775 = 8775, - /* module cafe_ccic, just ident 8801 */ + /* Marvell controllers starting at 8801 */ V4L2_IDENT_CAFE = 8801, + V4L2_IDENT_ARMADA610 = 8802, /* AKM AK8813/AK8814 */ V4L2_IDENT_AK8813 = 8813, diff --git a/include/media/v4l2-ctrls.h b/include/media/v4l2-ctrls.h index 97d063837b6..13fe4d744ab 100644 --- a/include/media/v4l2-ctrls.h +++ b/include/media/v4l2-ctrls.h @@ -27,9 +27,12 @@ /* forward references */ struct v4l2_ctrl_handler; +struct v4l2_ctrl_helper; struct v4l2_ctrl; struct video_device; struct v4l2_subdev; +struct v4l2_subscribed_event; +struct v4l2_fh; /** struct v4l2_ctrl_ops - The control operations that the driver has to provide. * @g_volatile_ctrl: Get a new value for this control. Generally only relevant @@ -51,6 +54,7 @@ struct v4l2_ctrl_ops { /** struct v4l2_ctrl - The control structure. * @node: The list node. + * @ev_subs: The list of control event subscriptions. * @handler: The handler that owns the control. * @cluster: Point to start of cluster array. * @ncontrols: Number of controls in cluster array. @@ -65,6 +69,15 @@ struct v4l2_ctrl_ops { * control's current value cannot be cached and needs to be * retrieved through the g_volatile_ctrl op. Drivers can set * this flag. + * @is_auto: If set, then this control selects whether the other cluster + * members are in 'automatic' mode or 'manual' mode. This is + * used for autogain/gain type clusters. Drivers should never + * set this flag directly. + * @manual_mode_value: If the is_auto flag is set, then this is the value + * of the auto control that determines if that control is in + * manual mode. So if the value of the auto control equals this + * value, then the whole cluster is in manual mode. Drivers should + * never set this flag directly. * @ops: The control ops. * @id: The control ID. * @name: The control name. @@ -97,6 +110,7 @@ struct v4l2_ctrl_ops { struct v4l2_ctrl { /* Administrative fields */ struct list_head node; + struct list_head ev_subs; struct v4l2_ctrl_handler *handler; struct v4l2_ctrl **cluster; unsigned ncontrols; @@ -105,6 +119,8 @@ struct v4l2_ctrl { unsigned int is_new:1; unsigned int is_private:1; unsigned int is_volatile:1; + unsigned int is_auto:1; + unsigned int manual_mode_value:8; const struct v4l2_ctrl_ops *ops; u32 id; @@ -134,6 +150,7 @@ struct v4l2_ctrl { * @node: List node for the sorted list. * @next: Single-link list node for the hash. * @ctrl: The actual control information. + * @helper: Pointer to helper struct. Used internally in prepare_ext_ctrls(). * * Each control handler has a list of these refs. The list_head is used to * keep a sorted-by-control-ID list of all controls, while the next pointer @@ -143,6 +160,7 @@ struct v4l2_ctrl_ref { struct list_head node; struct v4l2_ctrl_ref *next; struct v4l2_ctrl *ctrl; + struct v4l2_ctrl_helper *helper; }; /** struct v4l2_ctrl_handler - The control handler keeps track of all the @@ -363,6 +381,40 @@ int v4l2_ctrl_add_handler(struct v4l2_ctrl_handler *hdl, void v4l2_ctrl_cluster(unsigned ncontrols, struct v4l2_ctrl **controls); +/** v4l2_ctrl_auto_cluster() - Mark all controls in the cluster as belonging to + * that cluster and set it up for autofoo/foo-type handling. + * @ncontrols: The number of controls in this cluster. + * @controls: The cluster control array of size @ncontrols. The first control + * must be the 'auto' control (e.g. autogain, autoexposure, etc.) + * @manual_val: The value for the first control in the cluster that equals the + * manual setting. + * @set_volatile: If true, then all controls except the first auto control will + * have is_volatile set to true. If false, then is_volatile will not + * be touched. + * + * Use for control groups where one control selects some automatic feature and + * the other controls are only active whenever the automatic feature is turned + * off (manual mode). Typical examples: autogain vs gain, auto-whitebalance vs + * red and blue balance, etc. + * + * The behavior of such controls is as follows: + * + * When the autofoo control is set to automatic, then any manual controls + * are set to inactive and any reads will call g_volatile_ctrl (if the control + * was marked volatile). + * + * When the autofoo control is set to manual, then any manual controls will + * be marked active, and any reads will just return the current value without + * going through g_volatile_ctrl. + * + * In addition, this function will set the V4L2_CTRL_FLAG_UPDATE flag + * on the autofoo control and V4L2_CTRL_FLAG_INACTIVE on the foo control(s) + * if autofoo is in auto mode. + */ +void v4l2_ctrl_auto_cluster(unsigned ncontrols, struct v4l2_ctrl **controls, + u8 manual_val, bool set_volatile); + + /** v4l2_ctrl_find() - Find a control with the given ID. * @hdl: The control handler. * @id: The control ID to find. @@ -379,9 +431,9 @@ struct v4l2_ctrl *v4l2_ctrl_find(struct v4l2_ctrl_handler *hdl, u32 id); * This sets or clears the V4L2_CTRL_FLAG_INACTIVE flag atomically. * Does nothing if @ctrl == NULL. * This will usually be called from within the s_ctrl op. + * The V4L2_EVENT_CTRL event will be generated afterwards. * - * This function can be called regardless of whether the control handler - * is locked or not. + * This function assumes that the control handler is locked. */ void v4l2_ctrl_activate(struct v4l2_ctrl *ctrl, bool active); @@ -391,11 +443,12 @@ void v4l2_ctrl_activate(struct v4l2_ctrl *ctrl, bool active); * * This sets or clears the V4L2_CTRL_FLAG_GRABBED flag atomically. * Does nothing if @ctrl == NULL. + * The V4L2_EVENT_CTRL event will be generated afterwards. * This will usually be called when starting or stopping streaming in the * driver. * - * This function can be called regardless of whether the control handler - * is locked or not. + * This function assumes that the control handler is not locked and will + * take the lock itself. */ void v4l2_ctrl_grab(struct v4l2_ctrl *ctrl, bool grabbed); @@ -440,15 +493,22 @@ s32 v4l2_ctrl_g_ctrl(struct v4l2_ctrl *ctrl); */ int v4l2_ctrl_s_ctrl(struct v4l2_ctrl *ctrl, s32 val); +/* Internal helper functions that deal with control events. */ +void v4l2_ctrl_add_event(struct v4l2_ctrl *ctrl, + struct v4l2_subscribed_event *sev); +void v4l2_ctrl_del_event(struct v4l2_ctrl *ctrl, + struct v4l2_subscribed_event *sev); /* Helpers for ioctl_ops. If hdl == NULL then they will all return -EINVAL. */ int v4l2_queryctrl(struct v4l2_ctrl_handler *hdl, struct v4l2_queryctrl *qc); int v4l2_querymenu(struct v4l2_ctrl_handler *hdl, struct v4l2_querymenu *qm); int v4l2_g_ctrl(struct v4l2_ctrl_handler *hdl, struct v4l2_control *ctrl); -int v4l2_s_ctrl(struct v4l2_ctrl_handler *hdl, struct v4l2_control *ctrl); +int v4l2_s_ctrl(struct v4l2_fh *fh, struct v4l2_ctrl_handler *hdl, + struct v4l2_control *ctrl); int v4l2_g_ext_ctrls(struct v4l2_ctrl_handler *hdl, struct v4l2_ext_controls *c); int v4l2_try_ext_ctrls(struct v4l2_ctrl_handler *hdl, struct v4l2_ext_controls *c); -int v4l2_s_ext_ctrls(struct v4l2_ctrl_handler *hdl, struct v4l2_ext_controls *c); +int v4l2_s_ext_ctrls(struct v4l2_fh *fh, struct v4l2_ctrl_handler *hdl, + struct v4l2_ext_controls *c); /* Helpers for subdevices. If the associated ctrl_handler == NULL then they will all return -EINVAL. */ diff --git a/include/media/v4l2-event.h b/include/media/v4l2-event.h index 3b86177c8cd..5f14e8895ce 100644 --- a/include/media/v4l2-event.h +++ b/include/media/v4l2-event.h @@ -29,39 +29,95 @@ #include <linux/videodev2.h> #include <linux/wait.h> +/* + * Overview: + * + * Events are subscribed per-filehandle. An event specification consists of a + * type and is optionally associated with an object identified through the + * 'id' field. So an event is uniquely identified by the (type, id) tuple. + * + * The v4l2-fh struct has a list of subscribed events. The v4l2_subscribed_event + * struct is added to that list, one for every subscribed event. + * + * Each v4l2_subscribed_event struct ends with an array of v4l2_kevent structs. + * This array (ringbuffer, really) is used to store any events raised by the + * driver. The v4l2_kevent struct links into the 'available' list of the + * v4l2_fh struct so VIDIOC_DQEVENT will know which event to dequeue first. + * + * Finally, if the event subscription is associated with a particular object + * such as a V4L2 control, then that object needs to know about that as well + * so that an event can be raised by that object. So the 'node' field can + * be used to link the v4l2_subscribed_event struct into a list of that + * object. + * + * So to summarize: + * + * struct v4l2_fh has two lists: one of the subscribed events, and one of the + * pending events. + * + * struct v4l2_subscribed_event has a ringbuffer of raised (pending) events of + * that particular type. + * + * If struct v4l2_subscribed_event is associated with a specific object, then + * that object will have an internal list of struct v4l2_subscribed_event so + * it knows who subscribed an event to that object. + */ + struct v4l2_fh; +struct v4l2_subscribed_event; struct video_device; +/** struct v4l2_kevent - Internal kernel event struct. + * @list: List node for the v4l2_fh->available list. + * @sev: Pointer to parent v4l2_subscribed_event. + * @event: The event itself. + */ struct v4l2_kevent { struct list_head list; + struct v4l2_subscribed_event *sev; struct v4l2_event event; }; +/** struct v4l2_subscribed_event - Internal struct representing a subscribed event. + * @list: List node for the v4l2_fh->subscribed list. + * @type: Event type. + * @id: Associated object ID (e.g. control ID). 0 if there isn't any. + * @flags: Copy of v4l2_event_subscription->flags. + * @fh: Filehandle that subscribed to this event. + * @node: List node that hooks into the object's event list (if there is one). + * @replace: Optional callback that can replace event 'old' with event 'new'. + * @merge: Optional callback that can merge event 'old' into event 'new'. + * @elems: The number of elements in the events array. + * @first: The index of the events containing the oldest available event. + * @in_use: The number of queued events. + * @events: An array of @elems events. + */ struct v4l2_subscribed_event { struct list_head list; u32 type; + u32 id; + u32 flags; + struct v4l2_fh *fh; + struct list_head node; + void (*replace)(struct v4l2_event *old, + const struct v4l2_event *new); + void (*merge)(const struct v4l2_event *old, + struct v4l2_event *new); + unsigned elems; + unsigned first; + unsigned in_use; + struct v4l2_kevent events[]; }; -struct v4l2_events { - wait_queue_head_t wait; - struct list_head subscribed; /* Subscribed events */ - struct list_head free; /* Events ready for use */ - struct list_head available; /* Dequeueable event */ - unsigned int navailable; - unsigned int nallocated; /* Number of allocated events */ - u32 sequence; -}; - -int v4l2_event_init(struct v4l2_fh *fh); -int v4l2_event_alloc(struct v4l2_fh *fh, unsigned int n); -void v4l2_event_free(struct v4l2_fh *fh); int v4l2_event_dequeue(struct v4l2_fh *fh, struct v4l2_event *event, int nonblocking); void v4l2_event_queue(struct video_device *vdev, const struct v4l2_event *ev); +void v4l2_event_queue_fh(struct v4l2_fh *fh, const struct v4l2_event *ev); int v4l2_event_pending(struct v4l2_fh *fh); int v4l2_event_subscribe(struct v4l2_fh *fh, - struct v4l2_event_subscription *sub); + struct v4l2_event_subscription *sub, unsigned elems); int v4l2_event_unsubscribe(struct v4l2_fh *fh, struct v4l2_event_subscription *sub); +void v4l2_event_unsubscribe_all(struct v4l2_fh *fh); #endif /* V4L2_EVENT_H */ diff --git a/include/media/v4l2-fh.h b/include/media/v4l2-fh.h index 0206aa55be2..52513c225c1 100644 --- a/include/media/v4l2-fh.h +++ b/include/media/v4l2-fh.h @@ -29,13 +29,20 @@ #include <linux/list.h> struct video_device; -struct v4l2_events; +struct v4l2_ctrl_handler; struct v4l2_fh { struct list_head list; struct video_device *vdev; - struct v4l2_events *events; /* events, pending and subscribed */ + struct v4l2_ctrl_handler *ctrl_handler; enum v4l2_priority prio; + + /* Events */ + wait_queue_head_t wait; + struct list_head subscribed; /* Subscribed events */ + struct list_head available; /* Dequeueable event */ + unsigned int navailable; + u32 sequence; }; /* @@ -44,7 +51,7 @@ struct v4l2_fh { * from driver's v4l2_file_operations->open() handler if the driver * uses v4l2_fh. */ -int v4l2_fh_init(struct v4l2_fh *fh, struct video_device *vdev); +void v4l2_fh_init(struct v4l2_fh *fh, struct video_device *vdev); /* * Add the fh to the list of file handles on a video_device. The file * handle must be initialised first. diff --git a/include/media/v4l2-mediabus.h b/include/media/v4l2-mediabus.h index 971c7fa2961..6114007c8c7 100644 --- a/include/media/v4l2-mediabus.h +++ b/include/media/v4l2-mediabus.h @@ -13,6 +13,69 @@ #include <linux/v4l2-mediabus.h> +/* Parallel flags */ +/* + * Can the client run in master or in slave mode. By "Master mode" an operation + * mode is meant, when the client (e.g., a camera sensor) is producing + * horizontal and vertical synchronisation. In "Slave mode" the host is + * providing these signals to the slave. + */ +#define V4L2_MBUS_MASTER (1 << 0) +#define V4L2_MBUS_SLAVE (1 << 1) +/* Which signal polarities it supports */ +/* Note: in BT.656 mode HSYNC and VSYNC are unused */ +#define V4L2_MBUS_HSYNC_ACTIVE_HIGH (1 << 2) +#define V4L2_MBUS_HSYNC_ACTIVE_LOW (1 << 3) +#define V4L2_MBUS_VSYNC_ACTIVE_HIGH (1 << 4) +#define V4L2_MBUS_VSYNC_ACTIVE_LOW (1 << 5) +#define V4L2_MBUS_PCLK_SAMPLE_RISING (1 << 6) +#define V4L2_MBUS_PCLK_SAMPLE_FALLING (1 << 7) +#define V4L2_MBUS_DATA_ACTIVE_HIGH (1 << 8) +#define V4L2_MBUS_DATA_ACTIVE_LOW (1 << 9) + +/* Serial flags */ +/* How many lanes the client can use */ +#define V4L2_MBUS_CSI2_1_LANE (1 << 0) +#define V4L2_MBUS_CSI2_2_LANE (1 << 1) +#define V4L2_MBUS_CSI2_3_LANE (1 << 2) +#define V4L2_MBUS_CSI2_4_LANE (1 << 3) +/* On which channels it can send video data */ +#define V4L2_MBUS_CSI2_CHANNEL_0 (1 << 4) +#define V4L2_MBUS_CSI2_CHANNEL_1 (1 << 5) +#define V4L2_MBUS_CSI2_CHANNEL_2 (1 << 6) +#define V4L2_MBUS_CSI2_CHANNEL_3 (1 << 7) +/* Does it support only continuous or also non-continuous clock mode */ +#define V4L2_MBUS_CSI2_CONTINUOUS_CLOCK (1 << 8) +#define V4L2_MBUS_CSI2_NONCONTINUOUS_CLOCK (1 << 9) + +#define V4L2_MBUS_CSI2_LANES (V4L2_MBUS_CSI2_1_LANE | V4L2_MBUS_CSI2_2_LANE | \ + V4L2_MBUS_CSI2_3_LANE | V4L2_MBUS_CSI2_4_LANE) +#define V4L2_MBUS_CSI2_CHANNELS (V4L2_MBUS_CSI2_CHANNEL_0 | V4L2_MBUS_CSI2_CHANNEL_1 | \ + V4L2_MBUS_CSI2_CHANNEL_2 | V4L2_MBUS_CSI2_CHANNEL_3) + +/** + * v4l2_mbus_type - media bus type + * @V4L2_MBUS_PARALLEL: parallel interface with hsync and vsync + * @V4L2_MBUS_BT656: parallel interface with embedded synchronisation, can + * also be used for BT.1120 + * @V4L2_MBUS_CSI2: MIPI CSI-2 serial interface + */ +enum v4l2_mbus_type { + V4L2_MBUS_PARALLEL, + V4L2_MBUS_BT656, + V4L2_MBUS_CSI2, +}; + +/** + * v4l2_mbus_config - media bus configuration + * @type: in: interface type + * @flags: in / out: configuration flags, depending on @type + */ +struct v4l2_mbus_config { + enum v4l2_mbus_type type; + unsigned int flags; +}; + static inline void v4l2_fill_pix_format(struct v4l2_pix_format *pix_fmt, const struct v4l2_mbus_framefmt *mbus_fmt) { diff --git a/include/media/v4l2-subdev.h b/include/media/v4l2-subdev.h index 2884e3e69cb..257da1a30f6 100644 --- a/include/media/v4l2-subdev.h +++ b/include/media/v4l2-subdev.h @@ -229,6 +229,12 @@ struct v4l2_subdev_audio_ops { s_std_output: set v4l2_std_id for video OUTPUT devices. This is ignored by video input devices. + g_std_output: get current standard for video OUTPUT devices. This is ignored + by video input devices. + + g_tvnorms_output: get v4l2_std_id with all standards supported by video + OUTPUT device. This is ignored by video input devices. + s_crystal_freq: sets the frequency of the crystal used to generate the clocks in Hz. An extra flags field allows device specific configuration regarding clock frequency dividers, etc. If not used, then set flags @@ -243,6 +249,8 @@ struct v4l2_subdev_audio_ops { s_dv_preset: set dv (Digital Video) preset in the sub device. Similar to s_std() + g_dv_preset: get current dv (Digital Video) preset in the sub device. + query_dv_preset: query dv preset in the sub device. This is similar to querystd() @@ -259,12 +267,20 @@ struct v4l2_subdev_audio_ops { try_mbus_fmt: try to set a pixel format on a video data source s_mbus_fmt: set a pixel format on a video data source + + g_mbus_config: get supported mediabus configurations + + s_mbus_config: set a certain mediabus configuration. This operation is added + for compatibility with soc-camera drivers and should not be used by new + software. */ struct v4l2_subdev_video_ops { int (*s_routing)(struct v4l2_subdev *sd, u32 input, u32 output, u32 config); int (*s_crystal_freq)(struct v4l2_subdev *sd, u32 freq, u32 flags); int (*s_std_output)(struct v4l2_subdev *sd, v4l2_std_id std); + int (*g_std_output)(struct v4l2_subdev *sd, v4l2_std_id *std); int (*querystd)(struct v4l2_subdev *sd, v4l2_std_id *std); + int (*g_tvnorms_output)(struct v4l2_subdev *sd, v4l2_std_id *std); int (*g_input_status)(struct v4l2_subdev *sd, u32 *status); int (*s_stream)(struct v4l2_subdev *sd, int enable); int (*cropcap)(struct v4l2_subdev *sd, struct v4l2_cropcap *cc); @@ -282,6 +298,8 @@ struct v4l2_subdev_video_ops { struct v4l2_dv_enum_preset *preset); int (*s_dv_preset)(struct v4l2_subdev *sd, struct v4l2_dv_preset *preset); + int (*g_dv_preset)(struct v4l2_subdev *sd, + struct v4l2_dv_preset *preset); int (*query_dv_preset)(struct v4l2_subdev *sd, struct v4l2_dv_preset *preset); int (*s_dv_timings)(struct v4l2_subdev *sd, @@ -298,6 +316,10 @@ struct v4l2_subdev_video_ops { struct v4l2_mbus_framefmt *fmt); int (*s_mbus_fmt)(struct v4l2_subdev *sd, struct v4l2_mbus_framefmt *fmt); + int (*g_mbus_config)(struct v4l2_subdev *sd, + struct v4l2_mbus_config *cfg); + int (*s_mbus_config)(struct v4l2_subdev *sd, + const struct v4l2_mbus_config *cfg); }; /* @@ -513,8 +535,6 @@ struct v4l2_subdev { void *host_priv; /* subdev device node */ struct video_device devnode; - /* number of events to be allocated on open */ - unsigned int nevents; }; #define media_entity_to_v4l2_subdev(ent) \ diff --git a/include/pcmcia/device_id.h b/include/pcmcia/device_id.h index 63e5b8f6b7d..00dbfac9c6e 100644 --- a/include/pcmcia/device_id.h +++ b/include/pcmcia/device_id.h @@ -95,6 +95,15 @@ .prod_id = { (v1), NULL, NULL, NULL }, \ .prod_id_hash = { (vh1), 0, 0, 0 }, } +#define PCMCIA_DEVICE_MANF_CARD_PROD_ID3(manf, card, v3, vh3) { \ + .match_flags = PCMCIA_DEV_ID_MATCH_MANF_ID| \ + PCMCIA_DEV_ID_MATCH_CARD_ID| \ + PCMCIA_DEV_ID_MATCH_PROD_ID3, \ + .manf_id = (manf), \ + .card_id = (card), \ + .prod_id = { NULL, NULL, (v3), NULL }, \ + .prod_id_hash = { 0, 0, (vh3), 0 }, } + /* multi-function devices */ diff --git a/include/scsi/fc_frame.h b/include/scsi/fc_frame.h index 4ad02041b66..8225d8063ec 100644 --- a/include/scsi/fc_frame.h +++ b/include/scsi/fc_frame.h @@ -78,7 +78,6 @@ struct fc_frame { }; struct fcoe_rcv_info { - struct packet_type *ptype; struct fc_lport *fr_dev; /* transport layer private pointer */ struct fc_seq *fr_seq; /* for use with exchange manager */ struct fc_fcp_pkt *fr_fsp; /* for the corresponding fcp I/O */ diff --git a/include/sound/tea575x-tuner.h b/include/sound/tea575x-tuner.h index d2ea112fc20..726e94742a5 100644 --- a/include/sound/tea575x-tuner.h +++ b/include/sound/tea575x-tuner.h @@ -23,8 +23,8 @@ */ #include <linux/videodev2.h> +#include <media/v4l2-ctrls.h> #include <media/v4l2-dev.h> -#include <media/v4l2-ioctl.h> #define TEA575X_FMIF 10700 @@ -42,18 +42,20 @@ struct snd_tea575x_ops { }; struct snd_tea575x { - struct video_device *vd; /* video device */ + struct video_device vd; /* video device */ bool tea5759; /* 5759 chip is present */ bool mute; /* Device is muted? */ bool stereo; /* receiving stereo */ bool tuned; /* tuned to a station */ unsigned int val; /* hw value */ unsigned long freq; /* frequency */ - unsigned long in_use; /* set if the device is in use */ + struct mutex mutex; struct snd_tea575x_ops *ops; void *private_data; u8 card[32]; u8 bus_info[32]; + struct v4l2_ctrl_handler ctrl_handler; + int (*ext_init)(struct snd_tea575x *tea); }; int snd_tea575x_init(struct snd_tea575x *tea); diff --git a/include/trace/events/ext4.h b/include/trace/events/ext4.h index 6363193a341..b50a5473624 100644 --- a/include/trace/events/ext4.h +++ b/include/trace/events/ext4.h @@ -23,7 +23,7 @@ TRACE_EVENT(ext4_free_inode, TP_STRUCT__entry( __field( dev_t, dev ) __field( ino_t, ino ) - __field( umode_t, mode ) + __field( __u16, mode ) __field( uid_t, uid ) __field( gid_t, gid ) __field( __u64, blocks ) @@ -52,7 +52,7 @@ TRACE_EVENT(ext4_request_inode, TP_STRUCT__entry( __field( dev_t, dev ) __field( ino_t, dir ) - __field( umode_t, mode ) + __field( __u16, mode ) ), TP_fast_assign( @@ -75,7 +75,7 @@ TRACE_EVENT(ext4_allocate_inode, __field( dev_t, dev ) __field( ino_t, ino ) __field( ino_t, dir ) - __field( umode_t, mode ) + __field( __u16, mode ) ), TP_fast_assign( @@ -725,7 +725,7 @@ TRACE_EVENT(ext4_free_blocks, TP_STRUCT__entry( __field( dev_t, dev ) __field( ino_t, ino ) - __field( umode_t, mode ) + __field( __u16, mode ) __field( __u64, block ) __field( unsigned long, count ) __field( int, flags ) @@ -1012,7 +1012,7 @@ TRACE_EVENT(ext4_forget, TP_STRUCT__entry( __field( dev_t, dev ) __field( ino_t, ino ) - __field( umode_t, mode ) + __field( __u16, mode ) __field( int, is_metadata ) __field( __u64, block ) ), @@ -1039,7 +1039,7 @@ TRACE_EVENT(ext4_da_update_reserve_space, TP_STRUCT__entry( __field( dev_t, dev ) __field( ino_t, ino ) - __field( umode_t, mode ) + __field( __u16, mode ) __field( __u64, i_blocks ) __field( int, used_blocks ) __field( int, reserved_data_blocks ) @@ -1076,7 +1076,7 @@ TRACE_EVENT(ext4_da_reserve_space, TP_STRUCT__entry( __field( dev_t, dev ) __field( ino_t, ino ) - __field( umode_t, mode ) + __field( __u16, mode ) __field( __u64, i_blocks ) __field( int, md_needed ) __field( int, reserved_data_blocks ) @@ -1110,7 +1110,7 @@ TRACE_EVENT(ext4_da_release_space, TP_STRUCT__entry( __field( dev_t, dev ) __field( ino_t, ino ) - __field( umode_t, mode ) + __field( __u16, mode ) __field( __u64, i_blocks ) __field( int, freed_blocks ) __field( int, reserved_data_blocks ) @@ -1518,6 +1518,77 @@ TRACE_EVENT(ext4_load_inode, (unsigned long) __entry->ino) ); +TRACE_EVENT(ext4_journal_start, + TP_PROTO(struct super_block *sb, int nblocks, unsigned long IP), + + TP_ARGS(sb, nblocks, IP), + + TP_STRUCT__entry( + __field( dev_t, dev ) + __field( int, nblocks ) + __field(unsigned long, ip ) + ), + + TP_fast_assign( + __entry->dev = sb->s_dev; + __entry->nblocks = nblocks; + __entry->ip = IP; + ), + + TP_printk("dev %d,%d nblocks %d caller %pF", + MAJOR(__entry->dev), MINOR(__entry->dev), + __entry->nblocks, (void *)__entry->ip) +); + +DECLARE_EVENT_CLASS(ext4__trim, + TP_PROTO(struct super_block *sb, + ext4_group_t group, + ext4_grpblk_t start, + ext4_grpblk_t len), + + TP_ARGS(sb, group, start, len), + + TP_STRUCT__entry( + __field( int, dev_major ) + __field( int, dev_minor ) + __field( __u32, group ) + __field( int, start ) + __field( int, len ) + ), + + TP_fast_assign( + __entry->dev_major = MAJOR(sb->s_dev); + __entry->dev_minor = MINOR(sb->s_dev); + __entry->group = group; + __entry->start = start; + __entry->len = len; + ), + + TP_printk("dev %d,%d group %u, start %d, len %d", + __entry->dev_major, __entry->dev_minor, + __entry->group, __entry->start, __entry->len) +); + +DEFINE_EVENT(ext4__trim, ext4_trim_extent, + + TP_PROTO(struct super_block *sb, + ext4_group_t group, + ext4_grpblk_t start, + ext4_grpblk_t len), + + TP_ARGS(sb, group, start, len) +); + +DEFINE_EVENT(ext4__trim, ext4_trim_all_free, + + TP_PROTO(struct super_block *sb, + ext4_group_t group, + ext4_grpblk_t start, + ext4_grpblk_t len), + + TP_ARGS(sb, group, start, len) +); + #endif /* _TRACE_EXT4_H */ /* This part must be outside protection */ diff --git a/include/trace/events/jbd2.h b/include/trace/events/jbd2.h index bf16545cc97..75964412ddb 100644 --- a/include/trace/events/jbd2.h +++ b/include/trace/events/jbd2.h @@ -26,8 +26,8 @@ TRACE_EVENT(jbd2_checkpoint, __entry->result = result; ), - TP_printk("dev %s result %d", - jbd2_dev_to_name(__entry->dev), __entry->result) + TP_printk("dev %d,%d result %d", + MAJOR(__entry->dev), MINOR(__entry->dev), __entry->result) ); DECLARE_EVENT_CLASS(jbd2_commit, @@ -48,9 +48,9 @@ DECLARE_EVENT_CLASS(jbd2_commit, __entry->transaction = commit_transaction->t_tid; ), - TP_printk("dev %s transaction %d sync %d", - jbd2_dev_to_name(__entry->dev), __entry->transaction, - __entry->sync_commit) + TP_printk("dev %d,%d transaction %d sync %d", + MAJOR(__entry->dev), MINOR(__entry->dev), + __entry->transaction, __entry->sync_commit) ); DEFINE_EVENT(jbd2_commit, jbd2_start_commit, @@ -100,9 +100,9 @@ TRACE_EVENT(jbd2_end_commit, __entry->head = journal->j_tail_sequence; ), - TP_printk("dev %s transaction %d sync %d head %d", - jbd2_dev_to_name(__entry->dev), __entry->transaction, - __entry->sync_commit, __entry->head) + TP_printk("dev %d,%d transaction %d sync %d head %d", + MAJOR(__entry->dev), MINOR(__entry->dev), + __entry->transaction, __entry->sync_commit, __entry->head) ); TRACE_EVENT(jbd2_submit_inode_data, @@ -120,8 +120,9 @@ TRACE_EVENT(jbd2_submit_inode_data, __entry->ino = inode->i_ino; ), - TP_printk("dev %s ino %lu", - jbd2_dev_to_name(__entry->dev), (unsigned long) __entry->ino) + TP_printk("dev %d,%d ino %lu", + MAJOR(__entry->dev), MINOR(__entry->dev), + (unsigned long) __entry->ino) ); TRACE_EVENT(jbd2_run_stats, @@ -156,9 +157,9 @@ TRACE_EVENT(jbd2_run_stats, __entry->blocks_logged = stats->rs_blocks_logged; ), - TP_printk("dev %s tid %lu wait %u running %u locked %u flushing %u " + TP_printk("dev %d,%d tid %lu wait %u running %u locked %u flushing %u " "logging %u handle_count %u blocks %u blocks_logged %u", - jbd2_dev_to_name(__entry->dev), __entry->tid, + MAJOR(__entry->dev), MINOR(__entry->dev), __entry->tid, jiffies_to_msecs(__entry->wait), jiffies_to_msecs(__entry->running), jiffies_to_msecs(__entry->locked), @@ -192,9 +193,9 @@ TRACE_EVENT(jbd2_checkpoint_stats, __entry->dropped = stats->cs_dropped; ), - TP_printk("dev %s tid %lu chp_time %u forced_to_close %u " + TP_printk("dev %d,%d tid %lu chp_time %u forced_to_close %u " "written %u dropped %u", - jbd2_dev_to_name(__entry->dev), __entry->tid, + MAJOR(__entry->dev), MINOR(__entry->dev), __entry->tid, jiffies_to_msecs(__entry->chp_time), __entry->forced_to_close, __entry->written, __entry->dropped) ); @@ -222,9 +223,10 @@ TRACE_EVENT(jbd2_cleanup_journal_tail, __entry->freed = freed; ), - TP_printk("dev %s from %u to %u offset %lu freed %lu", - jbd2_dev_to_name(__entry->dev), __entry->tail_sequence, - __entry->first_tid, __entry->block_nr, __entry->freed) + TP_printk("dev %d,%d from %u to %u offset %lu freed %lu", + MAJOR(__entry->dev), MINOR(__entry->dev), + __entry->tail_sequence, __entry->first_tid, + __entry->block_nr, __entry->freed) ); #endif /* _TRACE_JBD2_H */ diff --git a/include/trace/events/xen.h b/include/trace/events/xen.h index 44d8decee09..92f1a796829 100644 --- a/include/trace/events/xen.h +++ b/include/trace/events/xen.h @@ -8,6 +8,8 @@ #include <asm/paravirt_types.h> #include <asm/xen/trace_types.h> +struct multicall_entry; + /* Multicalls */ DECLARE_EVENT_CLASS(xen_mc__batch, TP_PROTO(enum paravirt_lazy_mode mode), diff --git a/include/video/omapdss.h b/include/video/omapdss.h index 892b97f8e15..3b55ef22f8d 100644 --- a/include/video/omapdss.h +++ b/include/video/omapdss.h @@ -21,8 +21,6 @@ #include <linux/list.h> #include <linux/kobject.h> #include <linux/device.h> -#include <linux/platform_device.h> -#include <asm/atomic.h> #define DISPC_IRQ_FRAMEDONE (1 << 0) #define DISPC_IRQ_VSYNC (1 << 1) @@ -136,12 +134,6 @@ enum omap_display_caps { OMAP_DSS_DISPLAY_CAP_TEAR_ELIM = 1 << 1, }; -enum omap_dss_update_mode { - OMAP_DSS_UPDATE_DISABLED = 0, - OMAP_DSS_UPDATE_AUTO, - OMAP_DSS_UPDATE_MANUAL, -}; - enum omap_dss_display_state { OMAP_DSS_DISPLAY_DISABLED = 0, OMAP_DSS_DISPLAY_ACTIVE, @@ -246,7 +238,7 @@ int dsi_vc_send_bta_sync(struct omap_dss_device *dssdev, int channel); /* Board specific data */ struct omap_dss_board_info { - int (*get_last_off_on_transaction_id)(struct device *dev); + int (*get_context_loss_count)(struct device *dev); int num_devices; struct omap_dss_device **devices; struct omap_dss_device *default_device; @@ -266,8 +258,6 @@ static inline int omap_display_init(struct omap_dss_board_info *board_data) struct omap_display_platform_data { struct omap_dss_board_info *board_data; /* TODO: Additional members to be added when PM is considered */ - - bool (*opt_clock_available)(const char *clk_role); }; struct omap_video_timings { @@ -300,6 +290,12 @@ extern const struct omap_video_timings omap_dss_pal_timings; extern const struct omap_video_timings omap_dss_ntsc_timings; #endif +struct omap_dss_cpr_coefs { + s16 rr, rg, rb; + s16 gr, gg, gb; + s16 br, bg, bb; +}; + struct omap_overlay_info { bool enabled; @@ -359,6 +355,9 @@ struct omap_overlay_manager_info { bool trans_enabled; bool alpha_enabled; + + bool cpr_enable; + struct omap_dss_cpr_coefs cpr_coefs; }; struct omap_overlay_manager { @@ -526,11 +525,6 @@ struct omap_dss_driver { int (*resume)(struct omap_dss_device *display); int (*run_test)(struct omap_dss_device *display, int test); - int (*set_update_mode)(struct omap_dss_device *dssdev, - enum omap_dss_update_mode); - enum omap_dss_update_mode (*get_update_mode)( - struct omap_dss_device *dssdev); - int (*update)(struct omap_dss_device *dssdev, u16 x, u16 y, u16 w, u16 h); int (*sync)(struct omap_dss_device *dssdev); |