diff options
Diffstat (limited to 'include/net/mac80211.h')
| -rw-r--r-- | include/net/mac80211.h | 389 |
1 files changed, 279 insertions, 110 deletions
diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 0bf36975227..45d7d44d7cb 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -3,7 +3,7 @@ * * Copyright 2002-2005, Devicescape Software, Inc. * Copyright 2006-2007 Jiri Benc <jbenc@suse.cz> - * Copyright 2007-2008 Johannes Berg <johannes@sipsolutions.net> + * Copyright 2007-2010 Johannes Berg <johannes@sipsolutions.net> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -107,25 +107,14 @@ enum ieee80211_max_queues { * 2^n-1 in the range 1..32767] * @cw_max: maximum contention window [like @cw_min] * @txop: maximum burst time in units of 32 usecs, 0 meaning disabled + * @uapsd: is U-APSD mode enabled for the queue */ struct ieee80211_tx_queue_params { u16 txop; u16 cw_min; u16 cw_max; u8 aifs; -}; - -/** - * struct ieee80211_tx_queue_stats - transmit queue statistics - * - * @len: number of packets in queue - * @limit: queue length limit - * @count: number of frames sent - */ -struct ieee80211_tx_queue_stats { - unsigned int len; - unsigned int limit; - unsigned int count; + bool uapsd; }; struct ieee80211_low_level_stats { @@ -184,7 +173,8 @@ enum ieee80211_bss_change { * @use_short_slot: use short slot time (only relevant for ERP); * if the hardware cannot handle this it must set the * IEEE80211_HW_2GHZ_SHORT_SLOT_INCAPABLE hardware flag - * @dtim_period: num of beacons before the next DTIM, for PSM + * @dtim_period: num of beacons before the next DTIM, for beaconing, + * not valid in station mode (cf. hw conf ps_dtim_period) * @timestamp: beacon timestamp * @beacon_int: beacon interval * @assoc_capability: capabilities taken from assoc resp @@ -255,9 +245,6 @@ struct ieee80211_bss_conf { * @IEEE80211_TX_CTL_RATE_CTRL_PROBE: internal to mac80211, can be * set by rate control algorithms to indicate probe rate, will * be cleared for fragmented frames (except on the last fragment) - * @IEEE80211_TX_INTFL_RCALGO: mac80211 internal flag, do not test or - * set this flag in the driver; indicates that the rate control - * algorithm was used and should be notified of TX status * @IEEE80211_TX_INTFL_NEED_TXPROCESSING: completely internal to mac80211, * used to indicate that a pending frame requires TX processing before * it can be sent out. @@ -272,6 +259,14 @@ struct ieee80211_bss_conf { * transmit function after the current frame, this can be used * by drivers to kick the DMA queue only if unset or when the * queue gets full. + * @IEEE80211_TX_INTFL_RETRANSMISSION: This frame is being retransmitted + * after TX status because the destination was asleep, it must not + * be modified again (no seqno assignment, crypto, etc.) + * @IEEE80211_TX_INTFL_HAS_RADIOTAP: This frame was injected and still + * has a radiotap header at skb->data. + * @IEEE80211_TX_INTFL_NL80211_FRAME_TX: Frame was requested through nl80211 + * MLME command (internal to mac80211 to figure out whether to send TX + * status to user space) */ enum mac80211_tx_control_flags { IEEE80211_TX_CTL_REQ_TX_STATUS = BIT(0), @@ -287,12 +282,14 @@ enum mac80211_tx_control_flags { IEEE80211_TX_STAT_AMPDU = BIT(10), IEEE80211_TX_STAT_AMPDU_NO_BACK = BIT(11), IEEE80211_TX_CTL_RATE_CTRL_PROBE = BIT(12), - IEEE80211_TX_INTFL_RCALGO = BIT(13), IEEE80211_TX_INTFL_NEED_TXPROCESSING = BIT(14), IEEE80211_TX_INTFL_RETRIED = BIT(15), IEEE80211_TX_INTFL_DONT_ENCRYPT = BIT(16), IEEE80211_TX_CTL_PSPOLL_RESPONSE = BIT(17), IEEE80211_TX_CTL_MORE_FRAMES = BIT(18), + IEEE80211_TX_INTFL_RETRANSMISSION = BIT(19), + IEEE80211_TX_INTFL_HAS_RADIOTAP = BIT(20), + IEEE80211_TX_INTFL_NL80211_FRAME_TX = BIT(21), }; /** @@ -571,7 +568,13 @@ struct ieee80211_rx_status { * @IEEE80211_CONF_MONITOR: there's a monitor interface present -- use this * to determine for example whether to calculate timestamps for packets * or not, do not use instead of filter flags! - * @IEEE80211_CONF_PS: Enable 802.11 power save mode (managed mode only) + * @IEEE80211_CONF_PS: Enable 802.11 power save mode (managed mode only). + * This is the power save mode defined by IEEE 802.11-2007 section 11.2, + * meaning that the hardware still wakes up for beacons, is able to + * transmit frames and receive the possible acknowledgment frames. + * Not to be confused with hardware specific wakeup/sleep states, + * driver is responsible for that. See the section "Powersave support" + * for more. * @IEEE80211_CONF_IDLE: The device is running, but idle; if the flag is set * the driver should be prepared to handle configuration requests but * may turn the device off as much as possible. Typically, this flag will @@ -595,8 +598,10 @@ enum ieee80211_conf_flags { * @IEEE80211_CONF_CHANGE_CHANNEL: the channel/channel_type changed * @IEEE80211_CONF_CHANGE_RETRY_LIMITS: retry limits changed * @IEEE80211_CONF_CHANGE_IDLE: Idle flag changed + * @IEEE80211_CONF_CHANGE_SMPS: Spatial multiplexing powersave mode changed */ enum ieee80211_conf_changed { + IEEE80211_CONF_CHANGE_SMPS = BIT(1), IEEE80211_CONF_CHANGE_LISTEN_INTERVAL = BIT(2), IEEE80211_CONF_CHANGE_MONITOR = BIT(3), IEEE80211_CONF_CHANGE_PS = BIT(4), @@ -607,6 +612,25 @@ enum ieee80211_conf_changed { }; /** + * enum ieee80211_smps_mode - spatial multiplexing power save mode + * + * @IEEE80211_SMPS_AUTOMATIC: automatic + * @IEEE80211_SMPS_OFF: off + * @IEEE80211_SMPS_STATIC: static + * @IEEE80211_SMPS_DYNAMIC: dynamic + * @IEEE80211_SMPS_NUM_MODES: internal, don't use + */ +enum ieee80211_smps_mode { + IEEE80211_SMPS_AUTOMATIC, + IEEE80211_SMPS_OFF, + IEEE80211_SMPS_STATIC, + IEEE80211_SMPS_DYNAMIC, + + /* keep last */ + IEEE80211_SMPS_NUM_MODES, +}; + +/** * struct ieee80211_conf - configuration of the device * * This struct indicates how the driver shall configure the hardware. @@ -619,6 +643,9 @@ enum ieee80211_conf_changed { * value will be only achievable between DTIM frames, the hardware * needs to check for the multicast traffic bit in DTIM beacons. * This variable is valid only when the CONF_PS flag is set. + * @ps_dtim_period: The DTIM period of the AP we're connected to, for use + * in power saving. Power saving will not be enabled until a beacon + * has been received and the DTIM period is known. * @dynamic_ps_timeout: The dynamic powersave timeout (in ms), see the * powersave documentation below. This variable is valid only when * the CONF_PS flag is set. @@ -634,6 +661,10 @@ enum ieee80211_conf_changed { * @short_frame_max_tx_count: Maximum number of transmissions for a "short" * frame, called "dot11ShortRetryLimit" in 802.11, but actually means the * number of transmissions not the number of retries + * + * @smps_mode: spatial multiplexing powersave mode; note that + * %IEEE80211_SMPS_STATIC is used when the device is not + * configured for an HT channel */ struct ieee80211_conf { u32 flags; @@ -641,11 +672,13 @@ struct ieee80211_conf { int max_sleep_period; u16 listen_interval; + u8 ps_dtim_period; u8 long_frame_max_tx_count, short_frame_max_tx_count; struct ieee80211_channel *channel; enum nl80211_channel_type channel_type; + enum ieee80211_smps_mode smps_mode; }; /** @@ -657,12 +690,14 @@ struct ieee80211_conf { * @type: type of this virtual interface * @bss_conf: BSS configuration for this interface, either our own * or the BSS we're associated to + * @addr: address of this interface * @drv_priv: data area for driver use, will always be aligned to * sizeof(void *). */ struct ieee80211_vif { enum nl80211_iftype type; struct ieee80211_bss_conf bss_conf; + u8 addr[ETH_ALEN]; /* must be last */ u8 drv_priv[0] __attribute__((__aligned__(sizeof(void *)))); }; @@ -676,33 +711,6 @@ static inline bool ieee80211_vif_is_mesh(struct ieee80211_vif *vif) } /** - * struct ieee80211_if_init_conf - initial configuration of an interface - * - * @vif: pointer to a driver-use per-interface structure. The pointer - * itself is also used for various functions including - * ieee80211_beacon_get() and ieee80211_get_buffered_bc(). - * @type: one of &enum nl80211_iftype constants. Determines the type of - * added/removed interface. - * @mac_addr: pointer to MAC address of the interface. This pointer is valid - * until the interface is removed (i.e. it cannot be used after - * remove_interface() callback was called for this interface). - * - * This structure is used in add_interface() and remove_interface() - * callbacks of &struct ieee80211_hw. - * - * When you allow multiple interfaces to be added to your PHY, take care - * that the hardware can actually handle multiple MAC addresses. However, - * also take care that when there's no interface left with mac_addr != %NULL - * you remove the MAC address from the device to avoid acknowledging packets - * in pure monitor mode. - */ -struct ieee80211_if_init_conf { - enum nl80211_iftype type; - struct ieee80211_vif *vif; - void *mac_addr; -}; - -/** * enum ieee80211_key_alg - key algorithm * @ALG_WEP: WEP40 or WEP104 * @ALG_TKIP: TKIP @@ -797,7 +805,7 @@ enum set_key_cmd { * mac80211, any ieee80211_sta pointer you get access to must * either be protected by rcu_read_lock() explicitly or implicitly, * or you must take good care to not use such a pointer after a - * call to your sta_notify callback that removed it. + * call to your sta_remove callback that removed it. * * @addr: MAC address * @aid: AID we assigned to the station if we're an AP @@ -823,8 +831,8 @@ struct ieee80211_sta { * indicates addition and removal of a station to station table, * or if a associated station made a power state transition. * - * @STA_NOTIFY_ADD: a station was added to the station table - * @STA_NOTIFY_REMOVE: a station being removed from the station table + * @STA_NOTIFY_ADD: (DEPRECATED) a station was added to the station table + * @STA_NOTIFY_REMOVE: (DEPRECATED) a station being removed from the station table * @STA_NOTIFY_SLEEP: a station is now sleeping * @STA_NOTIFY_AWAKE: a sleeping station woke up */ @@ -926,6 +934,26 @@ enum ieee80211_tkip_key_type { * @IEEE80211_HW_BEACON_FILTER: * Hardware supports dropping of irrelevant beacon frames to * avoid waking up cpu. + * + * @IEEE80211_HW_SUPPORTS_STATIC_SMPS: + * Hardware supports static spatial multiplexing powersave, + * ie. can turn off all but one chain even on HT connections + * that should be using more chains. + * + * @IEEE80211_HW_SUPPORTS_DYNAMIC_SMPS: + * Hardware supports dynamic spatial multiplexing powersave, + * ie. can turn off all but one chain and then wake the rest + * up as required after, for example, rts/cts handshake. + * + * @IEEE80211_HW_SUPPORTS_UAPSD: + * Hardware supports Unscheduled Automatic Power Save Delivery + * (U-APSD) in managed mode. The mode is configured with + * conf_tx() operation. + * + * @IEEE80211_HW_REPORTS_TX_ACK_STATUS: + * Hardware can provide ack status reports of Tx frames to + * the stack. + * */ enum ieee80211_hw_flags { IEEE80211_HW_HAS_RATE_CONTROL = 1<<0, @@ -943,6 +971,10 @@ enum ieee80211_hw_flags { IEEE80211_HW_SUPPORTS_DYNAMIC_PS = 1<<12, IEEE80211_HW_MFP_CAPABLE = 1<<13, IEEE80211_HW_BEACON_FILTER = 1<<14, + IEEE80211_HW_SUPPORTS_STATIC_SMPS = 1<<15, + IEEE80211_HW_SUPPORTS_DYNAMIC_SMPS = 1<<16, + IEEE80211_HW_SUPPORTS_UAPSD = 1<<17, + IEEE80211_HW_REPORTS_TX_ACK_STATUS = 1<<18, }; /** @@ -1121,18 +1153,24 @@ ieee80211_get_alt_retry_rate(const struct ieee80211_hw *hw, * * mac80211 has support for various powersave implementations. * - * First, it can support hardware that handles all powersaving by - * itself, such hardware should simply set the %IEEE80211_HW_SUPPORTS_PS - * hardware flag. In that case, it will be told about the desired - * powersave mode depending on the association status, and the driver - * must take care of sending nullfunc frames when necessary, i.e. when - * entering and leaving powersave mode. The driver is required to look at - * the AID in beacons and signal to the AP that it woke up when it finds - * traffic directed to it. This mode supports dynamic PS by simply - * enabling/disabling PS. - * - * Additionally, such hardware may set the %IEEE80211_HW_SUPPORTS_DYNAMIC_PS - * flag to indicate that it can support dynamic PS mode itself (see below). + * First, it can support hardware that handles all powersaving by itself, + * such hardware should simply set the %IEEE80211_HW_SUPPORTS_PS hardware + * flag. In that case, it will be told about the desired powersave mode + * with the %IEEE80211_CONF_PS flag depending on the association status. + * The hardware must take care of sending nullfunc frames when necessary, + * i.e. when entering and leaving powersave mode. The hardware is required + * to look at the AID in beacons and signal to the AP that it woke up when + * it finds traffic directed to it. + * + * %IEEE80211_CONF_PS flag enabled means that the powersave mode defined in + * IEEE 802.11-2007 section 11.2 is enabled. This is not to be confused + * with hardware wakeup and sleep states. Driver is responsible for waking + * up the hardware before issueing commands to the hardware and putting it + * back to sleep at approriate times. + * + * When PS is enabled, hardware needs to wakeup for beacons and receive the + * buffered multicast/broadcast frames after the beacon. Also it must be + * possible to send frames and receive the acknowledment frame. * * Other hardware designs cannot send nullfunc frames by themselves and also * need software support for parsing the TIM bitmap. This is also supported @@ -1140,14 +1178,35 @@ ieee80211_get_alt_retry_rate(const struct ieee80211_hw *hw, * %IEEE80211_HW_PS_NULLFUNC_STACK flags. The hardware is of course still * required to pass up beacons. The hardware is still required to handle * waking up for multicast traffic; if it cannot the driver must handle that - * as best as it can, mac80211 is too slow. - * - * Dynamic powersave mode is an extension to normal powersave mode in which - * the hardware stays awake for a user-specified period of time after sending - * a frame so that reply frames need not be buffered and therefore delayed - * to the next wakeup. This can either be supported by hardware, in which case - * the driver needs to look at the @dynamic_ps_timeout hardware configuration - * value, or by the stack if all nullfunc handling is in the stack. + * as best as it can, mac80211 is too slow to do that. + * + * Dynamic powersave is an extension to normal powersave in which the + * hardware stays awake for a user-specified period of time after sending a + * frame so that reply frames need not be buffered and therefore delayed to + * the next wakeup. It's compromise of getting good enough latency when + * there's data traffic and still saving significantly power in idle + * periods. + * + * Dynamic powersave is supported by simply mac80211 enabling and disabling + * PS based on traffic. Driver needs to only set %IEEE80211_HW_SUPPORTS_PS + * flag and mac80211 will handle everything automatically. Additionally, + * hardware having support for the dynamic PS feature may set the + * %IEEE80211_HW_SUPPORTS_DYNAMIC_PS flag to indicate that it can support + * dynamic PS mode itself. The driver needs to look at the + * @dynamic_ps_timeout hardware configuration value and use it that value + * whenever %IEEE80211_CONF_PS is set. In this case mac80211 will disable + * dynamic PS feature in stack and will just keep %IEEE80211_CONF_PS + * enabled whenever user has enabled powersave. + * + * Driver informs U-APSD client support by enabling + * %IEEE80211_HW_SUPPORTS_UAPSD flag. The mode is configured through the + * uapsd paramater in conf_tx() operation. Hardware needs to send the QoS + * Nullfunc frames and stay awake until the service period has ended. To + * utilize U-APSD, dynamic powersave is disabled for voip AC and all frames + * from that AC are transmitted with powersave enabled. + * + * Note: U-APSD client mode is not yet supported with + * %IEEE80211_HW_PS_NULLFUNC_STACK. */ /** @@ -1211,6 +1270,31 @@ ieee80211_get_alt_retry_rate(const struct ieee80211_hw *hw, */ /** + * DOC: Spatial multiplexing power save + * + * SMPS (Spatial multiplexing power save) is a mechanism to conserve + * power in an 802.11n implementation. For details on the mechanism + * and rationale, please refer to 802.11 (as amended by 802.11n-2009) + * "11.2.3 SM power save". + * + * The mac80211 implementation is capable of sending action frames + * to update the AP about the station's SMPS mode, and will instruct + * the driver to enter the specific mode. It will also announce the + * requested SMPS mode during the association handshake. Hardware + * support for this feature is required, and can be indicated by + * hardware flags. + * + * The default mode will be "automatic", which nl80211/cfg80211 + * defines to be dynamic SMPS in (regular) powersave, and SMPS + * turned off otherwise. + * + * To support this feature, the driver must set the appropriate + * hardware support flags, and handle the SMPS flag to the config() + * operation. It will then with this mechanism be instructed to + * enter the requested SMPS mode while associated to an HT AP. + */ + +/** * DOC: Frame filtering * * mac80211 requires to see many management frames for proper @@ -1347,7 +1431,7 @@ enum ieee80211_ampdu_mlme_action { * When the device is started it should not have a MAC address * to avoid acknowledging frames before a non-monitor device * is added. - * Must be implemented. + * Must be implemented and can sleep. * * @stop: Called after last netdevice attached to the hardware * is disabled. This should turn off the hardware (at least @@ -1355,7 +1439,7 @@ enum ieee80211_ampdu_mlme_action { * May be called right after add_interface if that rejects * an interface. If you added any work onto the mac80211 workqueue * you should ensure to cancel it on this callback. - * Must be implemented. + * Must be implemented and can sleep. * * @add_interface: Called when a netdevice attached to the hardware is * enabled. Because it is not called for monitor mode devices, @start @@ -1365,7 +1449,7 @@ enum ieee80211_ampdu_mlme_action { * interface is given in the conf parameter. * The callback may refuse to add an interface by returning a * negative error code (which will be seen in userspace.) - * Must be implemented. + * Must be implemented and can sleep. * * @remove_interface: Notifies a driver that an interface is going down. * The @stop callback is called after this if it is the last interface @@ -1374,19 +1458,20 @@ enum ieee80211_ampdu_mlme_action { * must be cleared so the device no longer acknowledges packets, * the mac_addr member of the conf structure is, however, set to the * MAC address of the device going away. - * Hence, this callback must be implemented. + * Hence, this callback must be implemented. It can sleep. * * @config: Handler for configuration requests. IEEE 802.11 code calls this * function to change hardware configuration, e.g., channel. * This function should never fail but returns a negative error code - * if it does. + * if it does. The callback can sleep. * * @bss_info_changed: Handler for configuration requests related to BSS * parameters that may vary during BSS's lifespan, and may affect low * level driver (e.g. assoc/disassoc status, erp parameters). * This function should not be used if no BSS has been set, unless * for association indication. The @changed parameter indicates which - * of the bss parameters has changed when a call is made. + * of the bss parameters has changed when a call is made. The callback + * can sleep. * * @prepare_multicast: Prepare for multicast filter configuration. * This callback is optional, and its return value is passed @@ -1394,20 +1479,22 @@ enum ieee80211_ampdu_mlme_action { * * @configure_filter: Configure the device's RX filter. * See the section "Frame filtering" for more information. - * This callback must be implemented. + * This callback must be implemented and can sleep. * * @set_tim: Set TIM bit. mac80211 calls this function when a TIM bit * must be set or cleared for a given STA. Must be atomic. * * @set_key: See the section "Hardware crypto acceleration" - * This callback can sleep, and is only called between add_interface - * and remove_interface calls, i.e. while the given virtual interface + * This callback is only called between add_interface and + * remove_interface calls, i.e. while the given virtual interface * is enabled. * Returns a negative error code if the key can't be added. + * The callback can sleep. * * @update_tkip_key: See the section "Hardware crypto acceleration" * This callback will be called in the context of Rx. Called for drivers * which set IEEE80211_KEY_FLAG_TKIP_REQ_RX_P1_KEY. + * The callback must be atomic. * * @hw_scan: Ask the hardware to service the scan request, no need to start * the scan state machine in stack. The scan must honour the channel @@ -1421,53 +1508,64 @@ enum ieee80211_ampdu_mlme_action { * When the scan finishes, ieee80211_scan_completed() must be called; * note that it also must be called when the scan cannot finish due to * any error unless this callback returned a negative error code. + * The callback can sleep. * * @sw_scan_start: Notifier function that is called just before a software scan * is started. Can be NULL, if the driver doesn't need this notification. + * The callback can sleep. * - * @sw_scan_complete: Notifier function that is called just after a software scan - * finished. Can be NULL, if the driver doesn't need this notification. + * @sw_scan_complete: Notifier function that is called just after a + * software scan finished. Can be NULL, if the driver doesn't need + * this notification. + * The callback can sleep. * * @get_stats: Return low-level statistics. * Returns zero if statistics are available. + * The callback can sleep. * * @get_tkip_seq: If your device implements TKIP encryption in hardware this * callback should be provided to read the TKIP transmit IVs (both IV32 * and IV16) for the given key from hardware. + * The callback must be atomic. * * @set_rts_threshold: Configuration of RTS threshold (if device needs it) + * The callback can sleep. + * + * @sta_add: Notifies low level driver about addition of an associated station, + * AP, IBSS/WDS/mesh peer etc. This callback can sleep. + * + * @sta_remove: Notifies low level driver about removal of an associated + * station, AP, IBSS/WDS/mesh peer etc. This callback can sleep. * - * @sta_notify: Notifies low level driver about addition, removal or power - * state transition of an associated station, AP, IBSS/WDS/mesh peer etc. - * Must be atomic. + * @sta_notify: Notifies low level driver about power state transition of an + * associated station, AP, IBSS/WDS/mesh peer etc. Must be atomic. * * @conf_tx: Configure TX queue parameters (EDCF (aifs, cw_min, cw_max), * bursting) for a hardware TX queue. * Returns a negative error code on failure. - * - * @get_tx_stats: Get statistics of the current TX queue status. This is used - * to get number of currently queued packets (queue length), maximum queue - * size (limit), and total number of packets sent using each TX queue - * (count). The 'stats' pointer points to an array that has hw->queues - * items. + * The callback can sleep. * * @get_tsf: Get the current TSF timer value from firmware/hardware. Currently, * this is only used for IBSS mode BSSID merging and debugging. Is not a * required function. + * The callback can sleep. * * @set_tsf: Set the TSF timer to the specified value in the firmware/hardware. * Currently, this is only used for IBSS mode debugging. Is not a * required function. + * The callback can sleep. * * @reset_tsf: Reset the TSF timer and allow firmware/hardware to synchronize * with other STAs in the IBSS. This is only used in IBSS mode. This * function is optional if the firmware/hardware takes full care of * TSF synchronization. + * The callback can sleep. * * @tx_last_beacon: Determine whether the last IBSS beacon was sent by us. * This is needed only for IBSS mode and the result of this function is * used to determine whether to reply to Probe Requests. * Returns non-zero if this device sent the last beacon. + * The callback can sleep. * * @ampdu_action: Perform a certain A-MPDU action * The RA/TID combination determines the destination and TID we want @@ -1476,21 +1574,32 @@ enum ieee80211_ampdu_mlme_action { * is the first frame we expect to perform the action on. Notice * that TX/RX_STOP can pass NULL for this parameter. * Returns a negative error code on failure. + * The callback must be atomic. * * @rfkill_poll: Poll rfkill hardware state. If you need this, you also * need to set wiphy->rfkill_poll to %true before registration, * and need to call wiphy_rfkill_set_hw_state() in the callback. + * The callback can sleep. + * + * @set_coverage_class: Set slot time for given coverage class as specified + * in IEEE 802.11-2007 section 17.3.8.6 and modify ACK timeout + * accordingly. This callback is not required and may sleep. * * @testmode_cmd: Implement a cfg80211 test mode command. + * The callback can sleep. + * + * @flush: Flush all pending frames from the hardware queue, making sure + * that the hardware queues are empty. If the parameter @drop is set + * to %true, pending frames may be dropped. The callback can sleep. */ struct ieee80211_ops { int (*tx)(struct ieee80211_hw *hw, struct sk_buff *skb); int (*start)(struct ieee80211_hw *hw); void (*stop)(struct ieee80211_hw *hw); int (*add_interface)(struct ieee80211_hw *hw, - struct ieee80211_if_init_conf *conf); + struct ieee80211_vif *vif); void (*remove_interface)(struct ieee80211_hw *hw, - struct ieee80211_if_init_conf *conf); + struct ieee80211_vif *vif); int (*config)(struct ieee80211_hw *hw, u32 changed); void (*bss_info_changed)(struct ieee80211_hw *hw, struct ieee80211_vif *vif, @@ -1508,8 +1617,10 @@ struct ieee80211_ops { struct ieee80211_vif *vif, struct ieee80211_sta *sta, struct ieee80211_key_conf *key); void (*update_tkip_key)(struct ieee80211_hw *hw, - struct ieee80211_key_conf *conf, const u8 *address, - u32 iv32, u16 *phase1key); + struct ieee80211_vif *vif, + struct ieee80211_key_conf *conf, + struct ieee80211_sta *sta, + u32 iv32, u16 *phase1key); int (*hw_scan)(struct ieee80211_hw *hw, struct cfg80211_scan_request *req); void (*sw_scan_start)(struct ieee80211_hw *hw); @@ -1519,12 +1630,14 @@ struct ieee80211_ops { void (*get_tkip_seq)(struct ieee80211_hw *hw, u8 hw_key_idx, u32 *iv32, u16 *iv16); int (*set_rts_threshold)(struct ieee80211_hw *hw, u32 value); + int (*sta_add)(struct ieee80211_hw *hw, struct ieee80211_vif *vif, + struct ieee80211_sta *sta); + int (*sta_remove)(struct ieee80211_hw *hw, struct ieee80211_vif *vif, + struct ieee80211_sta *sta); void (*sta_notify)(struct ieee80211_hw *hw, struct ieee80211_vif *vif, enum sta_notify_cmd, struct ieee80211_sta *sta); int (*conf_tx)(struct ieee80211_hw *hw, u16 queue, const struct ieee80211_tx_queue_params *params); - int (*get_tx_stats)(struct ieee80211_hw *hw, - struct ieee80211_tx_queue_stats *stats); u64 (*get_tsf)(struct ieee80211_hw *hw); void (*set_tsf)(struct ieee80211_hw *hw, u64 tsf); void (*reset_tsf)(struct ieee80211_hw *hw); @@ -1535,9 +1648,11 @@ struct ieee80211_ops { struct ieee80211_sta *sta, u16 tid, u16 *ssn); void (*rfkill_poll)(struct ieee80211_hw *hw); + void (*set_coverage_class)(struct ieee80211_hw *hw, u8 coverage_class); #ifdef CONFIG_NL80211_TESTMODE int (*testmode_cmd)(struct ieee80211_hw *hw, void *data, int len); #endif + void (*flush)(struct ieee80211_hw *hw, bool drop); }; /** @@ -1777,7 +1892,7 @@ void ieee80211_tx_status_irqsafe(struct ieee80211_hw *hw, /** * ieee80211_beacon_get_tim - beacon generation function * @hw: pointer obtained from ieee80211_alloc_hw(). - * @vif: &struct ieee80211_vif pointer from &struct ieee80211_if_init_conf. + * @vif: &struct ieee80211_vif pointer from the add_interface callback. * @tim_offset: pointer to variable that will receive the TIM IE offset. * Set to 0 if invalid (in non-AP modes). * @tim_length: pointer to variable that will receive the TIM IE length, @@ -1805,7 +1920,7 @@ struct sk_buff *ieee80211_beacon_get_tim(struct ieee80211_hw *hw, /** * ieee80211_beacon_get - beacon generation function * @hw: pointer obtained from ieee80211_alloc_hw(). - * @vif: &struct ieee80211_vif pointer from &struct ieee80211_if_init_conf. + * @vif: &struct ieee80211_vif pointer from the add_interface callback. * * See ieee80211_beacon_get_tim(). */ @@ -1816,9 +1931,56 @@ static inline struct sk_buff *ieee80211_beacon_get(struct ieee80211_hw *hw, } /** + * ieee80211_pspoll_get - retrieve a PS Poll template + * @hw: pointer obtained from ieee80211_alloc_hw(). + * @vif: &struct ieee80211_vif pointer from the add_interface callback. + * + * Creates a PS Poll a template which can, for example, uploaded to + * hardware. The template must be updated after association so that correct + * AID, BSSID and MAC address is used. + * + * Note: Caller (or hardware) is responsible for setting the + * &IEEE80211_FCTL_PM bit. + */ +struct sk_buff *ieee80211_pspoll_get(struct ieee80211_hw *hw, + struct ieee80211_vif *vif); + +/** + * ieee80211_nullfunc_get - retrieve a nullfunc template + * @hw: pointer obtained from ieee80211_alloc_hw(). + * @vif: &struct ieee80211_vif pointer from the add_interface callback. + * + * Creates a Nullfunc template which can, for example, uploaded to + * hardware. The template must be updated after association so that correct + * BSSID and address is used. + * + * Note: Caller (or hardware) is responsible for setting the + * &IEEE80211_FCTL_PM bit as well as Duration and Sequence Control fields. + */ +struct sk_buff *ieee80211_nullfunc_get(struct ieee80211_hw *hw, + struct ieee80211_vif *vif); + +/** + * ieee80211_probereq_get - retrieve a Probe Request template + * @hw: pointer obtained from ieee80211_alloc_hw(). + * @vif: &struct ieee80211_vif pointer from the add_interface callback. + * @ssid: SSID buffer + * @ssid_len: length of SSID + * @ie: buffer containing all IEs except SSID for the template + * @ie_len: length of the IE buffer + * + * Creates a Probe Request template which can, for example, be uploaded to + * hardware. + */ +struct sk_buff *ieee80211_probereq_get(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + const u8 *ssid, size_t ssid_len, + const u8 *ie, size_t ie_len); + +/** * ieee80211_rts_get - RTS frame generation function * @hw: pointer obtained from ieee80211_alloc_hw(). - * @vif: &struct ieee80211_vif pointer from &struct ieee80211_if_init_conf. + * @vif: &struct ieee80211_vif pointer from the add_interface callback. * @frame: pointer to the frame that is going to be protected by the RTS. * @frame_len: the frame length (in octets). * @frame_txctl: &struct ieee80211_tx_info of the frame. @@ -1837,7 +1999,7 @@ void ieee80211_rts_get(struct ieee80211_hw *hw, struct ieee80211_vif *vif, /** * ieee80211_rts_duration - Get the duration field for an RTS frame * @hw: pointer obtained from ieee80211_alloc_hw(). - * @vif: &struct ieee80211_vif pointer from &struct ieee80211_if_init_conf. + * @vif: &struct ieee80211_vif pointer from the add_interface callback. * @frame_len: the length of the frame that is going to be protected by the RTS. * @frame_txctl: &struct ieee80211_tx_info of the frame. * @@ -1852,7 +2014,7 @@ __le16 ieee80211_rts_duration(struct ieee80211_hw *hw, /** * ieee80211_ctstoself_get - CTS-to-self frame generation function * @hw: pointer obtained from ieee80211_alloc_hw(). - * @vif: &struct ieee80211_vif pointer from &struct ieee80211_if_init_conf. + * @vif: &struct ieee80211_vif pointer from the add_interface callback. * @frame: pointer to the frame that is going to be protected by the CTS-to-self. * @frame_len: the frame length (in octets). * @frame_txctl: &struct ieee80211_tx_info of the frame. @@ -1872,7 +2034,7 @@ void ieee80211_ctstoself_get(struct ieee80211_hw *hw, /** * ieee80211_ctstoself_duration - Get the duration field for a CTS-to-self frame * @hw: pointer obtained from ieee80211_alloc_hw(). - * @vif: &struct ieee80211_vif pointer from &struct ieee80211_if_init_conf. + * @vif: &struct ieee80211_vif pointer from the add_interface callback. * @frame_len: the length of the frame that is going to be protected by the CTS-to-self. * @frame_txctl: &struct ieee80211_tx_info of the frame. * @@ -1888,7 +2050,7 @@ __le16 ieee80211_ctstoself_duration(struct ieee80211_hw *hw, /** * ieee80211_generic_frame_duration - Calculate the duration field for a frame * @hw: pointer obtained from ieee80211_alloc_hw(). - * @vif: &struct ieee80211_vif pointer from &struct ieee80211_if_init_conf. + * @vif: &struct ieee80211_vif pointer from the add_interface callback. * @frame_len: the length of the frame. * @rate: the rate at which the frame is going to be transmitted. * @@ -1903,7 +2065,7 @@ __le16 ieee80211_generic_frame_duration(struct ieee80211_hw *hw, /** * ieee80211_get_buffered_bc - accessing buffered broadcast and multicast frames * @hw: pointer as obtained from ieee80211_alloc_hw(). - * @vif: &struct ieee80211_vif pointer from &struct ieee80211_if_init_conf. + * @vif: &struct ieee80211_vif pointer from the add_interface callback. * * Function for accessing buffered broadcast and multicast frames. If * hardware/firmware does not implement buffering of broadcast/multicast @@ -2071,7 +2233,7 @@ int ieee80211_start_tx_ba_session(struct ieee80211_sta *sta, u16 tid); /** * ieee80211_start_tx_ba_cb - low level driver ready to aggregate. - * @vif: &struct ieee80211_vif pointer from &struct ieee80211_if_init_conf + * @vif: &struct ieee80211_vif pointer from the add_interface callback * @ra: receiver address of the BA session recipient. * @tid: the TID to BA on. * @@ -2082,7 +2244,7 @@ void ieee80211_start_tx_ba_cb(struct ieee80211_vif *vif, u8 *ra, u16 tid); /** * ieee80211_start_tx_ba_cb_irqsafe - low level driver ready to aggregate. - * @vif: &struct ieee80211_vif pointer from &struct ieee80211_if_init_conf + * @vif: &struct ieee80211_vif pointer from the add_interface callback * @ra: receiver address of the BA session recipient. * @tid: the TID to BA on. * @@ -2110,7 +2272,7 @@ int ieee80211_stop_tx_ba_session(struct ieee80211_sta *sta, u16 tid, /** * ieee80211_stop_tx_ba_cb - low level driver ready to stop aggregate. - * @vif: &struct ieee80211_vif pointer from &struct ieee80211_if_init_conf + * @vif: &struct ieee80211_vif pointer from the add_interface callback * @ra: receiver address of the BA session recipient. * @tid: the desired TID to BA on. * @@ -2121,7 +2283,7 @@ void ieee80211_stop_tx_ba_cb(struct ieee80211_vif *vif, u8 *ra, u8 tid); /** * ieee80211_stop_tx_ba_cb_irqsafe - low level driver ready to stop aggregate. - * @vif: &struct ieee80211_vif pointer from &struct ieee80211_if_init_conf + * @vif: &struct ieee80211_vif pointer from the add_interface callback * @ra: receiver address of the BA session recipient. * @tid: the desired TID to BA on. * @@ -2200,7 +2362,7 @@ void ieee80211_sta_block_awake(struct ieee80211_hw *hw, /** * ieee80211_beacon_loss - inform hardware does not receive beacons * - * @vif: &struct ieee80211_vif pointer from &struct ieee80211_if_init_conf. + * @vif: &struct ieee80211_vif pointer from the add_interface callback. * * When beacon filtering is enabled with IEEE80211_HW_BEACON_FILTERING and * IEEE80211_CONF_PS is set, the driver needs to inform whenever the @@ -2234,8 +2396,12 @@ enum rate_control_changed { * @short_preamble: whether mac80211 will request short-preamble transmission * if the selected rate supports it * @max_rate_idx: user-requested maximum rate (not MCS for now) + * (deprecated; this will be removed once drivers get updated to use + * rate_idx_mask) + * @rate_idx_mask: user-requested rate mask (not MCS for now) * @skb: the skb that will be transmitted, the control information in it needs * to be filled in + * @ap: whether this frame is sent out in AP mode */ struct ieee80211_tx_rate_control { struct ieee80211_hw *hw; @@ -2245,6 +2411,8 @@ struct ieee80211_tx_rate_control { struct ieee80211_tx_rate reported_rate; bool rts, short_preamble; u8 max_rate_idx; + u32 rate_idx_mask; + bool ap; }; struct rate_control_ops { @@ -2258,7 +2426,8 @@ struct rate_control_ops { struct ieee80211_sta *sta, void *priv_sta); void (*rate_update)(void *priv, struct ieee80211_supported_band *sband, struct ieee80211_sta *sta, - void *priv_sta, u32 changed); + void *priv_sta, u32 changed, + enum nl80211_channel_type oper_chan_type); void (*free_sta)(void *priv, struct ieee80211_sta *sta, void *priv_sta); |