diff options
Diffstat (limited to 'include/linux/cd1400.h')
| -rw-r--r-- | include/linux/cd1400.h | 292 |
1 files changed, 292 insertions, 0 deletions
diff --git a/include/linux/cd1400.h b/include/linux/cd1400.h new file mode 100644 index 00000000000..1dc3ab0523f --- /dev/null +++ b/include/linux/cd1400.h @@ -0,0 +1,292 @@ +/*****************************************************************************/ + +/* + * cd1400.h -- cd1400 UART hardware info. + * + * Copyright (C) 1996-1998 Stallion Technologies + * Copyright (C) 1994-1996 Greg Ungerer. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +/*****************************************************************************/ +#ifndef _CD1400_H +#define _CD1400_H +/*****************************************************************************/ + +/* + * Define the number of async ports per cd1400 uart chip. + */ +#define CD1400_PORTS 4 + +/* + * Define the cd1400 uarts internal FIFO sizes. + */ +#define CD1400_TXFIFOSIZE 12 +#define CD1400_RXFIFOSIZE 12 + +/* + * Local RX FIFO thresh hold level. Also define the RTS thresh hold + * based on the RX thresh hold. + */ +#define FIFO_RXTHRESHOLD 6 +#define FIFO_RTSTHRESHOLD 7 + +/*****************************************************************************/ + +/* + * Define the cd1400 register addresses. These are all the valid + * registers with the cd1400. Some are global, some virtual, some + * per port. + */ +#define GFRCR 0x40 +#define CAR 0x68 +#define GCR 0x4b +#define SVRR 0x67 +#define RICR 0x44 +#define TICR 0x45 +#define MICR 0x46 +#define RIR 0x6b +#define TIR 0x6a +#define MIR 0x69 +#define PPR 0x7e + +#define RIVR 0x43 +#define TIVR 0x42 +#define MIVR 0x41 +#define TDR 0x63 +#define RDSR 0x62 +#define MISR 0x4c +#define EOSRR 0x60 + +#define LIVR 0x18 +#define CCR 0x05 +#define SRER 0x06 +#define COR1 0x08 +#define COR2 0x09 +#define COR3 0x0a +#define COR4 0x1e +#define COR5 0x1f +#define CCSR 0x0b +#define RDCR 0x0e +#define SCHR1 0x1a +#define SCHR2 0x1b +#define SCHR3 0x1c +#define SCHR4 0x1d +#define SCRL 0x22 +#define SCRH 0x23 +#define LNC 0x24 +#define MCOR1 0x15 +#define MCOR2 0x16 +#define RTPR 0x21 +#define MSVR1 0x6c +#define MSVR2 0x6d +#define PSVR 0x6f +#define RBPR 0x78 +#define RCOR 0x7c +#define TBPR 0x72 +#define TCOR 0x76 + +/*****************************************************************************/ + +/* + * Define the set of baud rate clock divisors. + */ +#define CD1400_CLK0 8 +#define CD1400_CLK1 32 +#define CD1400_CLK2 128 +#define CD1400_CLK3 512 +#define CD1400_CLK4 2048 + +#define CD1400_NUMCLKS 5 + +/*****************************************************************************/ + +/* + * Define the clock pre-scalar value to be a 5 ms clock. This should be + * OK for now. It would probably be better to make it 10 ms, but we + * can't fit that divisor into 8 bits! + */ +#define PPR_SCALAR 244 + +/*****************************************************************************/ + +/* + * Define values used to set character size options. + */ +#define COR1_CHL5 0x00 +#define COR1_CHL6 0x01 +#define COR1_CHL7 0x02 +#define COR1_CHL8 0x03 + +/* + * Define values used to set the number of stop bits. + */ +#define COR1_STOP1 0x00 +#define COR1_STOP15 0x04 +#define COR1_STOP2 0x08 + +/* + * Define values used to set the parity scheme in use. + */ +#define COR1_PARNONE 0x00 +#define COR1_PARFORCE 0x20 +#define COR1_PARENB 0x40 +#define COR1_PARIGNORE 0x10 + +#define COR1_PARODD 0x80 +#define COR1_PAREVEN 0x00 + +#define COR2_IXM 0x80 +#define COR2_TXIBE 0x40 +#define COR2_ETC 0x20 +#define COR2_LLM 0x10 +#define COR2_RLM 0x08 +#define COR2_RTSAO 0x04 +#define COR2_CTSAE 0x02 + +#define COR3_SCDRNG 0x80 +#define COR3_SCD34 0x40 +#define COR3_FCT 0x20 +#define COR3_SCD12 0x10 + +/* + * Define values used by COR4. + */ +#define COR4_BRKINT 0x08 +#define COR4_IGNBRK 0x18 + +/*****************************************************************************/ + +/* + * Define the modem control register values. + * Note that the actual hardware is a little different to the conventional + * pin names on the cd1400. + */ +#define MSVR1_DTR 0x01 +#define MSVR1_DSR 0x10 +#define MSVR1_RI 0x20 +#define MSVR1_CTS 0x40 +#define MSVR1_DCD 0x80 + +#define MSVR2_RTS 0x02 +#define MSVR2_DSR 0x10 +#define MSVR2_RI 0x20 +#define MSVR2_CTS 0x40 +#define MSVR2_DCD 0x80 + +#define MCOR1_DCD 0x80 +#define MCOR1_CTS 0x40 +#define MCOR1_RI 0x20 +#define MCOR1_DSR 0x10 + +#define MCOR2_DCD 0x80 +#define MCOR2_CTS 0x40 +#define MCOR2_RI 0x20 +#define MCOR2_DSR 0x10 + +/*****************************************************************************/ + +/* + * Define the bits used with the service (interrupt) enable register. + */ +#define SRER_NNDT 0x01 +#define SRER_TXEMPTY 0x02 +#define SRER_TXDATA 0x04 +#define SRER_RXDATA 0x10 +#define SRER_MODEM 0x80 + +/*****************************************************************************/ + +/* + * Define operational commands for the command register. + */ +#define CCR_RESET 0x80 +#define CCR_CORCHANGE 0x4e +#define CCR_SENDCH 0x20 +#define CCR_CHANCTRL 0x10 + +#define CCR_TXENABLE (CCR_CHANCTRL | 0x08) +#define CCR_TXDISABLE (CCR_CHANCTRL | 0x04) +#define CCR_RXENABLE (CCR_CHANCTRL | 0x02) +#define CCR_RXDISABLE (CCR_CHANCTRL | 0x01) + +#define CCR_SENDSCHR1 (CCR_SENDCH | 0x01) +#define CCR_SENDSCHR2 (CCR_SENDCH | 0x02) +#define CCR_SENDSCHR3 (CCR_SENDCH | 0x03) +#define CCR_SENDSCHR4 (CCR_SENDCH | 0x04) + +#define CCR_RESETCHAN (CCR_RESET | 0x00) +#define CCR_RESETFULL (CCR_RESET | 0x01) +#define CCR_TXFLUSHFIFO (CCR_RESET | 0x02) + +#define CCR_MAXWAIT 10000 + +/*****************************************************************************/ + +/* + * Define the valid acknowledgement types (for hw ack cycle). + */ +#define ACK_TYPMASK 0x07 +#define ACK_TYPTX 0x02 +#define ACK_TYPMDM 0x01 +#define ACK_TYPRXGOOD 0x03 +#define ACK_TYPRXBAD 0x07 + +#define SVRR_RX 0x01 +#define SVRR_TX 0x02 +#define SVRR_MDM 0x04 + +#define ST_OVERRUN 0x01 +#define ST_FRAMING 0x02 +#define ST_PARITY 0x04 +#define ST_BREAK 0x08 +#define ST_SCHAR1 0x10 +#define ST_SCHAR2 0x20 +#define ST_SCHAR3 0x30 +#define ST_SCHAR4 0x40 +#define ST_RANGE 0x70 +#define ST_SCHARMASK 0x70 +#define ST_TIMEOUT 0x80 + +#define MISR_DCD 0x80 +#define MISR_CTS 0x40 +#define MISR_RI 0x20 +#define MISR_DSR 0x10 + +/*****************************************************************************/ + +/* + * Defines for the CCSR status register. + */ +#define CCSR_RXENABLED 0x80 +#define CCSR_RXFLOWON 0x40 +#define CCSR_RXFLOWOFF 0x20 +#define CCSR_TXENABLED 0x08 +#define CCSR_TXFLOWON 0x04 +#define CCSR_TXFLOWOFF 0x02 + +/*****************************************************************************/ + +/* + * Define the embedded commands. + */ +#define ETC_CMD 0x00 +#define ETC_STARTBREAK 0x81 +#define ETC_DELAY 0x82 +#define ETC_STOPBREAK 0x83 + +/*****************************************************************************/ +#endif |