diff options
Diffstat (limited to 'include/asm-x86/io_64.h')
| -rw-r--r-- | include/asm-x86/io_64.h | 244 |
1 files changed, 0 insertions, 244 deletions
diff --git a/include/asm-x86/io_64.h b/include/asm-x86/io_64.h deleted file mode 100644 index ee6e086b7df..00000000000 --- a/include/asm-x86/io_64.h +++ /dev/null @@ -1,244 +0,0 @@ -#ifndef ASM_X86__IO_64_H -#define ASM_X86__IO_64_H - - -/* - * This file contains the definitions for the x86 IO instructions - * inb/inw/inl/outb/outw/outl and the "string versions" of the same - * (insb/insw/insl/outsb/outsw/outsl). You can also use "pausing" - * versions of the single-IO instructions (inb_p/inw_p/..). - * - * This file is not meant to be obfuscating: it's just complicated - * to (a) handle it all in a way that makes gcc able to optimize it - * as well as possible and (b) trying to avoid writing the same thing - * over and over again with slight variations and possibly making a - * mistake somewhere. - */ - -/* - * Thanks to James van Artsdalen for a better timing-fix than - * the two short jumps: using outb's to a nonexistent port seems - * to guarantee better timings even on fast machines. - * - * On the other hand, I'd like to be sure of a non-existent port: - * I feel a bit unsafe about using 0x80 (should be safe, though) - * - * Linus - */ - - /* - * Bit simplified and optimized by Jan Hubicka - * Support of BIGMEM added by Gerhard Wichert, Siemens AG, July 1999. - * - * isa_memset_io, isa_memcpy_fromio, isa_memcpy_toio added, - * isa_read[wl] and isa_write[wl] fixed - * - Arnaldo Carvalho de Melo <acme@conectiva.com.br> - */ - -extern void native_io_delay(void); - -extern int io_delay_type; -extern void io_delay_init(void); - -#if defined(CONFIG_PARAVIRT) -#include <asm/paravirt.h> -#else - -static inline void slow_down_io(void) -{ - native_io_delay(); -#ifdef REALLY_SLOW_IO - native_io_delay(); - native_io_delay(); - native_io_delay(); -#endif -} -#endif - -/* - * Talk about misusing macros.. - */ -#define __OUT1(s, x) \ -static inline void out##s(unsigned x value, unsigned short port) { - -#define __OUT2(s, s1, s2) \ -asm volatile ("out" #s " %" s1 "0,%" s2 "1" - -#ifndef REALLY_SLOW_IO -#define REALLY_SLOW_IO -#define UNSET_REALLY_SLOW_IO -#endif - -#define __OUT(s, s1, x) \ - __OUT1(s, x) __OUT2(s, s1, "w") : : "a" (value), "Nd" (port)); \ - } \ - __OUT1(s##_p, x) __OUT2(s, s1, "w") : : "a" (value), "Nd" (port)); \ - slow_down_io(); \ -} - -#define __IN1(s) \ -static inline RETURN_TYPE in##s(unsigned short port) \ -{ \ - RETURN_TYPE _v; - -#define __IN2(s, s1, s2) \ - asm volatile ("in" #s " %" s2 "1,%" s1 "0" - -#define __IN(s, s1, i...) \ - __IN1(s) __IN2(s, s1, "w") : "=a" (_v) : "Nd" (port), ##i); \ - return _v; \ - } \ - __IN1(s##_p) __IN2(s, s1, "w") : "=a" (_v) : "Nd" (port), ##i); \ - slow_down_io(); \ - return _v; } - -#ifdef UNSET_REALLY_SLOW_IO -#undef REALLY_SLOW_IO -#endif - -#define __INS(s) \ -static inline void ins##s(unsigned short port, void *addr, \ - unsigned long count) \ -{ \ - asm volatile ("rep ; ins" #s \ - : "=D" (addr), "=c" (count) \ - : "d" (port), "0" (addr), "1" (count)); \ -} - -#define __OUTS(s) \ -static inline void outs##s(unsigned short port, const void *addr, \ - unsigned long count) \ -{ \ - asm volatile ("rep ; outs" #s \ - : "=S" (addr), "=c" (count) \ - : "d" (port), "0" (addr), "1" (count)); \ -} - -#define RETURN_TYPE unsigned char -__IN(b, "") -#undef RETURN_TYPE -#define RETURN_TYPE unsigned short -__IN(w, "") -#undef RETURN_TYPE -#define RETURN_TYPE unsigned int -__IN(l, "") -#undef RETURN_TYPE - -__OUT(b, "b", char) -__OUT(w, "w", short) -__OUT(l, , int) - -__INS(b) -__INS(w) -__INS(l) - -__OUTS(b) -__OUTS(w) -__OUTS(l) - -#define IO_SPACE_LIMIT 0xffff - -#if defined(__KERNEL__) && defined(__x86_64__) - -#include <linux/vmalloc.h> - -#ifndef __i386__ -/* - * Change virtual addresses to physical addresses and vv. - * These are pretty trivial - */ -static inline unsigned long virt_to_phys(volatile void *address) -{ - return __pa(address); -} - -static inline void *phys_to_virt(unsigned long address) -{ - return __va(address); -} -#endif - -/* - * Change "struct page" to physical address. - */ -#define page_to_phys(page) ((dma_addr_t)page_to_pfn(page) << PAGE_SHIFT) - -#include <asm-generic/iomap.h> - -/* - * This one maps high address device memory and turns off caching for that area. - * it's useful if some control registers are in such an area and write combining - * or read caching is not desirable: - */ -extern void __iomem *ioremap_nocache(resource_size_t offset, unsigned long size); -extern void __iomem *ioremap_cache(resource_size_t offset, unsigned long size); -extern void __iomem *ioremap_prot(resource_size_t offset, unsigned long size, - unsigned long prot_val); - -/* - * The default ioremap() behavior is non-cached: - */ -static inline void __iomem *ioremap(resource_size_t offset, unsigned long size) -{ - return ioremap_nocache(offset, size); -} - -extern void iounmap(volatile void __iomem *addr); - -extern void __iomem *fix_ioremap(unsigned idx, unsigned long phys); - -/* - * ISA I/O bus memory addresses are 1:1 with the physical address. - */ -#define isa_virt_to_bus virt_to_phys -#define isa_page_to_bus page_to_phys -#define isa_bus_to_virt phys_to_virt - -/* - * However PCI ones are not necessarily 1:1 and therefore these interfaces - * are forbidden in portable PCI drivers. - * - * Allow them on x86 for legacy drivers, though. - */ -#define virt_to_bus virt_to_phys -#define bus_to_virt phys_to_virt - -void __memcpy_fromio(void *, unsigned long, unsigned); -void __memcpy_toio(unsigned long, const void *, unsigned); - -static inline void memcpy_fromio(void *to, const volatile void __iomem *from, - unsigned len) -{ - __memcpy_fromio(to, (unsigned long)from, len); -} - -static inline void memcpy_toio(volatile void __iomem *to, const void *from, - unsigned len) -{ - __memcpy_toio((unsigned long)to, from, len); -} - -void memset_io(volatile void __iomem *a, int b, size_t c); - -/* - * ISA space is 'always mapped' on a typical x86 system, no need to - * explicitly ioremap() it. The fact that the ISA IO space is mapped - * to PAGE_OFFSET is pure coincidence - it does not mean ISA values - * are physical addresses. The following constant pointer can be - * used as the IO-area pointer (it can be iounmapped as well, so the - * analogy with PCI is quite large): - */ -#define __ISA_IO_base ((char __iomem *)(PAGE_OFFSET)) - -#define flush_write_buffers() - -#define BIO_VMERGE_BOUNDARY iommu_bio_merge - -/* - * Convert a virtual cached pointer to an uncached pointer - */ -#define xlate_dev_kmem_ptr(p) p - -#endif /* __KERNEL__ */ - -#endif /* ASM_X86__IO_64_H */ |