diff options
Diffstat (limited to 'include/asm-mips/system.h')
| -rw-r--r-- | include/asm-mips/system.h | 156 |
1 files changed, 10 insertions, 146 deletions
diff --git a/include/asm-mips/system.h b/include/asm-mips/system.h index 3056feed5a3..9428057a50c 100644 --- a/include/asm-mips/system.h +++ b/include/asm-mips/system.h @@ -3,7 +3,7 @@ * License. See the file "COPYING" in the main directory of this archive * for more details. * - * Copyright (C) 1994, 95, 96, 97, 98, 99, 2003 by Ralf Baechle + * Copyright (C) 1994, 95, 96, 97, 98, 99, 2003, 06 by Ralf Baechle * Copyright (C) 1996 by Paul M. Antoine * Copyright (C) 1999 Silicon Graphics * Kevin D. Kissell, kevink@mips.org and Carsten Langgaard, carstenl@mips.com @@ -16,132 +16,12 @@ #include <linux/irqflags.h> #include <asm/addrspace.h> +#include <asm/barrier.h> #include <asm/cpu-features.h> #include <asm/dsp.h> #include <asm/ptrace.h> #include <asm/war.h> -/* - * read_barrier_depends - Flush all pending reads that subsequents reads - * depend on. - * - * No data-dependent reads from memory-like regions are ever reordered - * over this barrier. All reads preceding this primitive are guaranteed - * to access memory (but not necessarily other CPUs' caches) before any - * reads following this primitive that depend on the data return by - * any of the preceding reads. This primitive is much lighter weight than - * rmb() on most CPUs, and is never heavier weight than is - * rmb(). - * - * These ordering constraints are respected by both the local CPU - * and the compiler. - * - * Ordering is not guaranteed by anything other than these primitives, - * not even by data dependencies. See the documentation for - * memory_barrier() for examples and URLs to more information. - * - * For example, the following code would force ordering (the initial - * value of "a" is zero, "b" is one, and "p" is "&a"): - * - * <programlisting> - * CPU 0 CPU 1 - * - * b = 2; - * memory_barrier(); - * p = &b; q = p; - * read_barrier_depends(); - * d = *q; - * </programlisting> - * - * because the read of "*q" depends on the read of "p" and these - * two reads are separated by a read_barrier_depends(). However, - * the following code, with the same initial values for "a" and "b": - * - * <programlisting> - * CPU 0 CPU 1 - * - * a = 2; - * memory_barrier(); - * b = 3; y = b; - * read_barrier_depends(); - * x = a; - * </programlisting> - * - * does not enforce ordering, since there is no data dependency between - * the read of "a" and the read of "b". Therefore, on some CPUs, such - * as Alpha, "y" could be set to 3 and "x" to 0. Use rmb() - * in cases like this where there are no data dependencies. - */ - -#define read_barrier_depends() do { } while(0) - -#ifdef CONFIG_CPU_HAS_SYNC -#define __sync() \ - __asm__ __volatile__( \ - ".set push\n\t" \ - ".set noreorder\n\t" \ - ".set mips2\n\t" \ - "sync\n\t" \ - ".set pop" \ - : /* no output */ \ - : /* no input */ \ - : "memory") -#else -#define __sync() do { } while(0) -#endif - -#define __fast_iob() \ - __asm__ __volatile__( \ - ".set push\n\t" \ - ".set noreorder\n\t" \ - "lw $0,%0\n\t" \ - "nop\n\t" \ - ".set pop" \ - : /* no output */ \ - : "m" (*(int *)CKSEG1) \ - : "memory") - -#define fast_wmb() __sync() -#define fast_rmb() __sync() -#define fast_mb() __sync() -#define fast_iob() \ - do { \ - __sync(); \ - __fast_iob(); \ - } while (0) - -#ifdef CONFIG_CPU_HAS_WB - -#include <asm/wbflush.h> - -#define wmb() fast_wmb() -#define rmb() fast_rmb() -#define mb() wbflush() -#define iob() wbflush() - -#else /* !CONFIG_CPU_HAS_WB */ - -#define wmb() fast_wmb() -#define rmb() fast_rmb() -#define mb() fast_mb() -#define iob() fast_iob() - -#endif /* !CONFIG_CPU_HAS_WB */ - -#ifdef CONFIG_SMP -#define smp_mb() mb() -#define smp_rmb() rmb() -#define smp_wmb() wmb() -#define smp_read_barrier_depends() read_barrier_depends() -#else -#define smp_mb() barrier() -#define smp_rmb() barrier() -#define smp_wmb() barrier() -#define smp_read_barrier_depends() do { } while(0) -#endif - -#define set_mb(var, value) \ -do { var = value; mb(); } while (0) /* * switch_to(n) should switch tasks to task nr n, first @@ -217,9 +97,6 @@ static inline unsigned long __xchg_u32(volatile int * m, unsigned int val) " .set mips3 \n" " sc %2, %1 \n" " beqzl %2, 1b \n" -#ifdef CONFIG_SMP - " sync \n" -#endif " .set mips0 \n" : "=&r" (retval), "=m" (*m), "=&r" (dummy) : "R" (*m), "Jr" (val) @@ -235,9 +112,6 @@ static inline unsigned long __xchg_u32(volatile int * m, unsigned int val) " .set mips3 \n" " sc %2, %1 \n" " beqz %2, 1b \n" -#ifdef CONFIG_SMP - " sync \n" -#endif " .set mips0 \n" : "=&r" (retval), "=m" (*m), "=&r" (dummy) : "R" (*m), "Jr" (val) @@ -251,6 +125,8 @@ static inline unsigned long __xchg_u32(volatile int * m, unsigned int val) local_irq_restore(flags); /* implies memory barrier */ } + smp_mb(); + return retval; } @@ -268,9 +144,6 @@ static inline __u64 __xchg_u64(volatile __u64 * m, __u64 val) " move %2, %z4 \n" " scd %2, %1 \n" " beqzl %2, 1b \n" -#ifdef CONFIG_SMP - " sync \n" -#endif " .set mips0 \n" : "=&r" (retval), "=m" (*m), "=&r" (dummy) : "R" (*m), "Jr" (val) @@ -284,9 +157,6 @@ static inline __u64 __xchg_u64(volatile __u64 * m, __u64 val) " move %2, %z4 \n" " scd %2, %1 \n" " beqz %2, 1b \n" -#ifdef CONFIG_SMP - " sync \n" -#endif " .set mips0 \n" : "=&r" (retval), "=m" (*m), "=&r" (dummy) : "R" (*m), "Jr" (val) @@ -300,6 +170,8 @@ static inline __u64 __xchg_u64(volatile __u64 * m, __u64 val) local_irq_restore(flags); /* implies memory barrier */ } + smp_mb(); + return retval; } #else @@ -345,9 +217,6 @@ static inline unsigned long __cmpxchg_u32(volatile int * m, unsigned long old, " .set mips3 \n" " sc $1, %1 \n" " beqzl $1, 1b \n" -#ifdef CONFIG_SMP - " sync \n" -#endif "2: \n" " .set pop \n" : "=&r" (retval), "=R" (*m) @@ -365,9 +234,6 @@ static inline unsigned long __cmpxchg_u32(volatile int * m, unsigned long old, " .set mips3 \n" " sc $1, %1 \n" " beqz $1, 1b \n" -#ifdef CONFIG_SMP - " sync \n" -#endif "2: \n" " .set pop \n" : "=&r" (retval), "=R" (*m) @@ -383,6 +249,8 @@ static inline unsigned long __cmpxchg_u32(volatile int * m, unsigned long old, local_irq_restore(flags); /* implies memory barrier */ } + smp_mb(); + return retval; } @@ -402,9 +270,6 @@ static inline unsigned long __cmpxchg_u64(volatile int * m, unsigned long old, " move $1, %z4 \n" " scd $1, %1 \n" " beqzl $1, 1b \n" -#ifdef CONFIG_SMP - " sync \n" -#endif "2: \n" " .set pop \n" : "=&r" (retval), "=R" (*m) @@ -420,9 +285,6 @@ static inline unsigned long __cmpxchg_u64(volatile int * m, unsigned long old, " move $1, %z4 \n" " scd $1, %1 \n" " beqz $1, 1b \n" -#ifdef CONFIG_SMP - " sync \n" -#endif "2: \n" " .set pop \n" : "=&r" (retval), "=R" (*m) @@ -438,6 +300,8 @@ static inline unsigned long __cmpxchg_u64(volatile int * m, unsigned long old, local_irq_restore(flags); /* implies memory barrier */ } + smp_mb(); + return retval; } #else |