diff options
Diffstat (limited to 'drivers')
33 files changed, 1800 insertions, 329 deletions
diff --git a/drivers/mtd/Kconfig b/drivers/mtd/Kconfig index 03f2eb5627e..557bec599f4 100644 --- a/drivers/mtd/Kconfig +++ b/drivers/mtd/Kconfig @@ -74,8 +74,8 @@ config MTD_REDBOOT_PARTS_READONLY endif # MTD_REDBOOT_PARTS config MTD_CMDLINE_PARTS - bool "Command line partition table parsing" - depends on MTD = "y" + tristate "Command line partition table parsing" + depends on MTD ---help--- Allow generic configuration of the MTD partition tables via the kernel command line. Multiple flash resources are supported for hardware where diff --git a/drivers/mtd/ar7part.c b/drivers/mtd/ar7part.c index 7c057a05adb..ddc0a4287a4 100644 --- a/drivers/mtd/ar7part.c +++ b/drivers/mtd/ar7part.c @@ -142,7 +142,13 @@ static int __init ar7_parser_init(void) return register_mtd_parser(&ar7_parser); } +static void __exit ar7_parser_exit(void) +{ + deregister_mtd_parser(&ar7_parser); +} + module_init(ar7_parser_init); +module_exit(ar7_parser_exit); MODULE_LICENSE("GPL"); MODULE_AUTHOR( "Felix Fietkau <nbd@openwrt.org>, " diff --git a/drivers/mtd/bcm47xxpart.c b/drivers/mtd/bcm47xxpart.c index 6a1180502cc..63feb75cc8e 100644 --- a/drivers/mtd/bcm47xxpart.c +++ b/drivers/mtd/bcm47xxpart.c @@ -19,12 +19,6 @@ /* 10 parts were found on sflash on Netgear WNDR4500 */ #define BCM47XXPART_MAX_PARTS 12 -/* - * Amount of bytes we read when analyzing each block of flash memory. - * Set it big enough to allow detecting partition and reading important data. - */ -#define BCM47XXPART_BYTES_TO_READ 0x404 - /* Magics */ #define BOARD_DATA_MAGIC 0x5246504D /* MPFR */ #define POT_MAGIC1 0x54544f50 /* POTT */ @@ -59,13 +53,21 @@ static int bcm47xxpart_parse(struct mtd_info *master, uint32_t *buf; size_t bytes_read; uint32_t offset; - uint32_t blocksize = 0x10000; + uint32_t blocksize = master->erasesize; struct trx_header *trx; + int trx_part = -1; + int last_trx_part = -1; + int max_bytes_to_read = 0x8004; + + if (blocksize <= 0x10000) + blocksize = 0x10000; + if (blocksize == 0x20000) + max_bytes_to_read = 0x18004; /* Alloc */ parts = kzalloc(sizeof(struct mtd_partition) * BCM47XXPART_MAX_PARTS, GFP_KERNEL); - buf = kzalloc(BCM47XXPART_BYTES_TO_READ, GFP_KERNEL); + buf = kzalloc(max_bytes_to_read, GFP_KERNEL); /* Parse block by block looking for magics */ for (offset = 0; offset <= master->size - blocksize; @@ -80,7 +82,7 @@ static int bcm47xxpart_parse(struct mtd_info *master, } /* Read beginning of the block */ - if (mtd_read(master, offset, BCM47XXPART_BYTES_TO_READ, + if (mtd_read(master, offset, max_bytes_to_read, &bytes_read, (uint8_t *)buf) < 0) { pr_err("mtd_read error while parsing (offset: 0x%X)!\n", offset); @@ -95,9 +97,16 @@ static int bcm47xxpart_parse(struct mtd_info *master, } /* Standard NVRAM */ - if (buf[0x000 / 4] == NVRAM_HEADER) { + if (buf[0x000 / 4] == NVRAM_HEADER || + buf[0x1000 / 4] == NVRAM_HEADER || + buf[0x8000 / 4] == NVRAM_HEADER || + (blocksize == 0x20000 && ( + buf[0x10000 / 4] == NVRAM_HEADER || + buf[0x11000 / 4] == NVRAM_HEADER || + buf[0x18000 / 4] == NVRAM_HEADER))) { bcm47xxpart_add_part(&parts[curr_part++], "nvram", offset, 0); + offset = rounddown(offset, blocksize); continue; } @@ -131,6 +140,10 @@ static int bcm47xxpart_parse(struct mtd_info *master, if (buf[0x000 / 4] == TRX_MAGIC) { trx = (struct trx_header *)buf; + trx_part = curr_part; + bcm47xxpart_add_part(&parts[curr_part++], "firmware", + offset, 0); + i = 0; /* We have LZMA loader if offset[2] points to sth */ if (trx->offset[2]) { @@ -154,6 +167,8 @@ static int bcm47xxpart_parse(struct mtd_info *master, offset + trx->offset[i], 0); i++; + last_trx_part = curr_part - 1; + /* * We have whole TRX scanned, skip to the next part. Use * roundown (not roundup), as the loop will increase @@ -169,11 +184,15 @@ static int bcm47xxpart_parse(struct mtd_info *master, * Assume that partitions end at the beginning of the one they are * followed by. */ - for (i = 0; i < curr_part - 1; i++) - parts[i].size = parts[i + 1].offset - parts[i].offset; - if (curr_part > 0) - parts[curr_part - 1].size = - master->size - parts[curr_part - 1].offset; + for (i = 0; i < curr_part; i++) { + u64 next_part_offset = (i < curr_part - 1) ? + parts[i + 1].offset : master->size; + + parts[i].size = next_part_offset - parts[i].offset; + if (i == last_trx_part && trx_part >= 0) + parts[trx_part].size = next_part_offset - + parts[trx_part].offset; + } *pparts = parts; return curr_part; diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c index b86197286f2..fff665d59a0 100644 --- a/drivers/mtd/chips/cfi_cmdset_0002.c +++ b/drivers/mtd/chips/cfi_cmdset_0002.c @@ -33,6 +33,8 @@ #include <linux/delay.h> #include <linux/interrupt.h> #include <linux/reboot.h> +#include <linux/of.h> +#include <linux/of_platform.h> #include <linux/mtd/map.h> #include <linux/mtd/mtd.h> #include <linux/mtd/cfi.h> @@ -74,6 +76,10 @@ static void put_chip(struct map_info *map, struct flchip *chip, unsigned long ad static int cfi_atmel_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len); static int cfi_atmel_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len); +static int cfi_ppb_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len); +static int cfi_ppb_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len); +static int cfi_ppb_is_locked(struct mtd_info *mtd, loff_t ofs, uint64_t len); + static struct mtd_chip_driver cfi_amdstd_chipdrv = { .probe = NULL, /* Not usable directly */ .destroy = cfi_amdstd_destroy, @@ -496,6 +502,7 @@ static void cfi_fixup_m29ew_delay_after_resume(struct cfi_private *cfi) struct mtd_info *cfi_cmdset_0002(struct map_info *map, int primary) { struct cfi_private *cfi = map->fldrv_priv; + struct device_node __maybe_unused *np = map->device_node; struct mtd_info *mtd; int i; @@ -570,6 +577,17 @@ struct mtd_info *cfi_cmdset_0002(struct map_info *map, int primary) cfi_tell_features(extp); #endif +#ifdef CONFIG_OF + if (np && of_property_read_bool( + np, "use-advanced-sector-protection") + && extp->BlkProtUnprot == 8) { + printk(KERN_INFO " Advanced Sector Protection (PPB Locking) supported\n"); + mtd->_lock = cfi_ppb_lock; + mtd->_unlock = cfi_ppb_unlock; + mtd->_is_locked = cfi_ppb_is_locked; + } +#endif + bootloc = extp->TopBottom; if ((bootloc < 2) || (bootloc > 5)) { printk(KERN_WARNING "%s: CFI contains unrecognised boot " @@ -2172,6 +2190,205 @@ static int cfi_atmel_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len) return cfi_varsize_frob(mtd, do_atmel_unlock, ofs, len, NULL); } +/* + * Advanced Sector Protection - PPB (Persistent Protection Bit) locking + */ + +struct ppb_lock { + struct flchip *chip; + loff_t offset; + int locked; +}; + +#define MAX_SECTORS 512 + +#define DO_XXLOCK_ONEBLOCK_LOCK ((void *)1) +#define DO_XXLOCK_ONEBLOCK_UNLOCK ((void *)2) +#define DO_XXLOCK_ONEBLOCK_GETLOCK ((void *)3) + +static int __maybe_unused do_ppb_xxlock(struct map_info *map, + struct flchip *chip, + unsigned long adr, int len, void *thunk) +{ + struct cfi_private *cfi = map->fldrv_priv; + unsigned long timeo; + int ret; + + mutex_lock(&chip->mutex); + ret = get_chip(map, chip, adr + chip->start, FL_LOCKING); + if (ret) { + mutex_unlock(&chip->mutex); + return ret; + } + + pr_debug("MTD %s(): XXLOCK 0x%08lx len %d\n", __func__, adr, len); + + cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chip->start, map, cfi, + cfi->device_type, NULL); + cfi_send_gen_cmd(0x55, cfi->addr_unlock2, chip->start, map, cfi, + cfi->device_type, NULL); + /* PPB entry command */ + cfi_send_gen_cmd(0xC0, cfi->addr_unlock1, chip->start, map, cfi, + cfi->device_type, NULL); + + if (thunk == DO_XXLOCK_ONEBLOCK_LOCK) { + chip->state = FL_LOCKING; + map_write(map, CMD(0xA0), chip->start + adr); + map_write(map, CMD(0x00), chip->start + adr); + } else if (thunk == DO_XXLOCK_ONEBLOCK_UNLOCK) { + /* + * Unlocking of one specific sector is not supported, so we + * have to unlock all sectors of this device instead + */ + chip->state = FL_UNLOCKING; + map_write(map, CMD(0x80), chip->start); + map_write(map, CMD(0x30), chip->start); + } else if (thunk == DO_XXLOCK_ONEBLOCK_GETLOCK) { + chip->state = FL_JEDEC_QUERY; + /* Return locked status: 0->locked, 1->unlocked */ + ret = !cfi_read_query(map, adr); + } else + BUG(); + + /* + * Wait for some time as unlocking of all sectors takes quite long + */ + timeo = jiffies + msecs_to_jiffies(2000); /* 2s max (un)locking */ + for (;;) { + if (chip_ready(map, adr)) + break; + + if (time_after(jiffies, timeo)) { + printk(KERN_ERR "Waiting for chip to be ready timed out.\n"); + ret = -EIO; + break; + } + + UDELAY(map, chip, adr, 1); + } + + /* Exit BC commands */ + map_write(map, CMD(0x90), chip->start); + map_write(map, CMD(0x00), chip->start); + + chip->state = FL_READY; + put_chip(map, chip, adr + chip->start); + mutex_unlock(&chip->mutex); + + return ret; +} + +static int __maybe_unused cfi_ppb_lock(struct mtd_info *mtd, loff_t ofs, + uint64_t len) +{ + return cfi_varsize_frob(mtd, do_ppb_xxlock, ofs, len, + DO_XXLOCK_ONEBLOCK_LOCK); +} + +static int __maybe_unused cfi_ppb_unlock(struct mtd_info *mtd, loff_t ofs, + uint64_t len) +{ + struct mtd_erase_region_info *regions = mtd->eraseregions; + struct map_info *map = mtd->priv; + struct cfi_private *cfi = map->fldrv_priv; + struct ppb_lock *sect; + unsigned long adr; + loff_t offset; + uint64_t length; + int chipnum; + int i; + int sectors; + int ret; + + /* + * PPB unlocking always unlocks all sectors of the flash chip. + * We need to re-lock all previously locked sectors. So lets + * first check the locking status of all sectors and save + * it for future use. + */ + sect = kzalloc(MAX_SECTORS * sizeof(struct ppb_lock), GFP_KERNEL); + if (!sect) + return -ENOMEM; + + /* + * This code to walk all sectors is a slightly modified version + * of the cfi_varsize_frob() code. + */ + i = 0; + chipnum = 0; + adr = 0; + sectors = 0; + offset = 0; + length = mtd->size; + + while (length) { + int size = regions[i].erasesize; + + /* + * Only test sectors that shall not be unlocked. The other + * sectors shall be unlocked, so lets keep their locking + * status at "unlocked" (locked=0) for the final re-locking. + */ + if ((adr < ofs) || (adr >= (ofs + len))) { + sect[sectors].chip = &cfi->chips[chipnum]; + sect[sectors].offset = offset; + sect[sectors].locked = do_ppb_xxlock( + map, &cfi->chips[chipnum], adr, 0, + DO_XXLOCK_ONEBLOCK_GETLOCK); + } + + adr += size; + offset += size; + length -= size; + + if (offset == regions[i].offset + size * regions[i].numblocks) + i++; + + if (adr >> cfi->chipshift) { + adr = 0; + chipnum++; + + if (chipnum >= cfi->numchips) + break; + } + + sectors++; + if (sectors >= MAX_SECTORS) { + printk(KERN_ERR "Only %d sectors for PPB locking supported!\n", + MAX_SECTORS); + kfree(sect); + return -EINVAL; + } + } + + /* Now unlock the whole chip */ + ret = cfi_varsize_frob(mtd, do_ppb_xxlock, ofs, len, + DO_XXLOCK_ONEBLOCK_UNLOCK); + if (ret) { + kfree(sect); + return ret; + } + + /* + * PPB unlocking always unlocks all sectors of the flash chip. + * We need to re-lock all previously locked sectors. + */ + for (i = 0; i < sectors; i++) { + if (sect[i].locked) + do_ppb_xxlock(map, sect[i].chip, sect[i].offset, 0, + DO_XXLOCK_ONEBLOCK_LOCK); + } + + kfree(sect); + return ret; +} + +static int __maybe_unused cfi_ppb_is_locked(struct mtd_info *mtd, loff_t ofs, + uint64_t len) +{ + return cfi_varsize_frob(mtd, do_ppb_xxlock, ofs, len, + DO_XXLOCK_ONEBLOCK_GETLOCK) ? 1 : 0; +} static void cfi_amdstd_sync (struct mtd_info *mtd) { diff --git a/drivers/mtd/cmdlinepart.c b/drivers/mtd/cmdlinepart.c index c533f27d863..721caebbc5c 100644 --- a/drivers/mtd/cmdlinepart.c +++ b/drivers/mtd/cmdlinepart.c @@ -22,11 +22,22 @@ * * mtdparts=<mtddef>[;<mtddef] * <mtddef> := <mtd-id>:<partdef>[,<partdef>] - * where <mtd-id> is the name from the "cat /proc/mtd" command - * <partdef> := <size>[@offset][<name>][ro][lk] + * <partdef> := <size>[@<offset>][<name>][ro][lk] * <mtd-id> := unique name used in mapping driver/device (mtd->name) * <size> := standard linux memsize OR "-" to denote all remaining space + * size is automatically truncated at end of device + * if specified or trucated size is 0 the part is skipped + * <offset> := standard linux memsize + * if omitted the part will immediately follow the previous part + * or 0 if the first part * <name> := '(' NAME ')' + * NAME will appear in /proc/mtd + * + * <size> and <offset> can be specified such that the parts are out of order + * in physical memory and may even overlap. + * + * The parts are assigned MTD numbers in the order they are specified in the + * command line regardless of their order in physical memory. * * Examples: * @@ -70,6 +81,7 @@ struct cmdline_mtd_partition { static struct cmdline_mtd_partition *partitions; /* the command line passed to mtdpart_setup() */ +static char *mtdparts; static char *cmdline; static int cmdline_parsed; @@ -330,6 +342,14 @@ static int parse_cmdline_partitions(struct mtd_info *master, if (part->parts[i].size == SIZE_REMAINING) part->parts[i].size = master->size - offset; + if (offset + part->parts[i].size > master->size) { + printk(KERN_WARNING ERRP + "%s: partitioning exceeds flash size, truncating\n", + part->mtd_id); + part->parts[i].size = master->size - offset; + } + offset += part->parts[i].size; + if (part->parts[i].size == 0) { printk(KERN_WARNING ERRP "%s: skipping zero sized partition\n", @@ -337,16 +357,8 @@ static int parse_cmdline_partitions(struct mtd_info *master, part->num_parts--; memmove(&part->parts[i], &part->parts[i + 1], sizeof(*part->parts) * (part->num_parts - i)); - continue; - } - - if (offset + part->parts[i].size > master->size) { - printk(KERN_WARNING ERRP - "%s: partitioning exceeds flash size, truncating\n", - part->mtd_id); - part->parts[i].size = master->size - offset; + i--; } - offset += part->parts[i].size; } *pparts = kmemdup(part->parts, sizeof(*part->parts) * part->num_parts, @@ -365,7 +377,7 @@ static int parse_cmdline_partitions(struct mtd_info *master, * * This function needs to be visible for bootloaders. */ -static int mtdpart_setup(char *s) +static int __init mtdpart_setup(char *s) { cmdline = s; return 1; @@ -381,10 +393,21 @@ static struct mtd_part_parser cmdline_parser = { static int __init cmdline_parser_init(void) { + if (mtdparts) + mtdpart_setup(mtdparts); return register_mtd_parser(&cmdline_parser); } +static void __exit cmdline_parser_exit(void) +{ + deregister_mtd_parser(&cmdline_parser); +} + module_init(cmdline_parser_init); +module_exit(cmdline_parser_exit); + +MODULE_PARM_DESC(mtdparts, "Partitioning specification"); +module_param(mtdparts, charp, 0); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Marius Groeger <mag@sysgo.de>"); diff --git a/drivers/mtd/devices/Makefile b/drivers/mtd/devices/Makefile index 395733a30ef..369a1943ca2 100644 --- a/drivers/mtd/devices/Makefile +++ b/drivers/mtd/devices/Makefile @@ -17,8 +17,10 @@ obj-$(CONFIG_MTD_LART) += lart.o obj-$(CONFIG_MTD_BLOCK2MTD) += block2mtd.o obj-$(CONFIG_MTD_DATAFLASH) += mtd_dataflash.o obj-$(CONFIG_MTD_M25P80) += m25p80.o +obj-$(CONFIG_MTD_NAND_OMAP_BCH) += elm.o obj-$(CONFIG_MTD_SPEAR_SMI) += spear_smi.o obj-$(CONFIG_MTD_SST25L) += sst25l.o obj-$(CONFIG_MTD_BCM47XXSFLASH) += bcm47xxsflash.o -CFLAGS_docg3.o += -I$(src)
\ No newline at end of file + +CFLAGS_docg3.o += -I$(src) diff --git a/drivers/mtd/devices/bcm47xxsflash.c b/drivers/mtd/devices/bcm47xxsflash.c index 4714584aa99..95266285acb 100644 --- a/drivers/mtd/devices/bcm47xxsflash.c +++ b/drivers/mtd/devices/bcm47xxsflash.c @@ -5,6 +5,8 @@ #include <linux/platform_device.h> #include <linux/bcma/bcma.h> +#include "bcm47xxsflash.h" + MODULE_LICENSE("GPL"); MODULE_DESCRIPTION("Serial flash driver for BCMA bus"); @@ -13,26 +15,28 @@ static const char *probes[] = { "bcm47xxpart", NULL }; static int bcm47xxsflash_read(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf) { - struct bcma_sflash *sflash = mtd->priv; + struct bcm47xxsflash *b47s = mtd->priv; /* Check address range */ if ((from + len) > mtd->size) return -EINVAL; - memcpy_fromio(buf, (void __iomem *)KSEG0ADDR(sflash->window + from), + memcpy_fromio(buf, (void __iomem *)KSEG0ADDR(b47s->window + from), len); + *retlen = len; return len; } -static void bcm47xxsflash_fill_mtd(struct bcma_sflash *sflash, - struct mtd_info *mtd) +static void bcm47xxsflash_fill_mtd(struct bcm47xxsflash *b47s) { - mtd->priv = sflash; + struct mtd_info *mtd = &b47s->mtd; + + mtd->priv = b47s; mtd->name = "bcm47xxsflash"; mtd->owner = THIS_MODULE; mtd->type = MTD_ROM; - mtd->size = sflash->size; + mtd->size = b47s->size; mtd->_read = bcm47xxsflash_read; /* TODO: implement writing support and verify/change following code */ @@ -40,19 +44,30 @@ static void bcm47xxsflash_fill_mtd(struct bcma_sflash *sflash, mtd->writebufsize = mtd->writesize = 1; } -static int bcm47xxsflash_probe(struct platform_device *pdev) +/************************************************** + * BCMA + **************************************************/ + +static int bcm47xxsflash_bcma_probe(struct platform_device *pdev) { struct bcma_sflash *sflash = dev_get_platdata(&pdev->dev); + struct bcm47xxsflash *b47s; int err; - sflash->mtd = kzalloc(sizeof(struct mtd_info), GFP_KERNEL); - if (!sflash->mtd) { + b47s = kzalloc(sizeof(*b47s), GFP_KERNEL); + if (!b47s) { err = -ENOMEM; goto out; } - bcm47xxsflash_fill_mtd(sflash, sflash->mtd); + sflash->priv = b47s; - err = mtd_device_parse_register(sflash->mtd, probes, NULL, NULL, 0); + b47s->window = sflash->window; + b47s->blocksize = sflash->blocksize; + b47s->numblocks = sflash->numblocks; + b47s->size = sflash->size; + bcm47xxsflash_fill_mtd(b47s); + + err = mtd_device_parse_register(&b47s->mtd, probes, NULL, NULL, 0); if (err) { pr_err("Failed to register MTD device: %d\n", err); goto err_dev_reg; @@ -61,34 +76,40 @@ static int bcm47xxsflash_probe(struct platform_device *pdev) return 0; err_dev_reg: - kfree(sflash->mtd); + kfree(&b47s->mtd); out: return err; } -static int bcm47xxsflash_remove(struct platform_device *pdev) +static int bcm47xxsflash_bcma_remove(struct platform_device *pdev) { struct bcma_sflash *sflash = dev_get_platdata(&pdev->dev); + struct bcm47xxsflash *b47s = sflash->priv; - mtd_device_unregister(sflash->mtd); - kfree(sflash->mtd); + mtd_device_unregister(&b47s->mtd); + kfree(b47s); return 0; } static struct platform_driver bcma_sflash_driver = { - .remove = bcm47xxsflash_remove, + .probe = bcm47xxsflash_bcma_probe, + .remove = bcm47xxsflash_bcma_remove, .driver = { .name = "bcma_sflash", .owner = THIS_MODULE, }, }; +/************************************************** + * Init + **************************************************/ + static int __init bcm47xxsflash_init(void) { int err; - err = platform_driver_probe(&bcma_sflash_driver, bcm47xxsflash_probe); + err = platform_driver_register(&bcma_sflash_driver); if (err) pr_err("Failed to register BCMA serial flash driver: %d\n", err); diff --git a/drivers/mtd/devices/bcm47xxsflash.h b/drivers/mtd/devices/bcm47xxsflash.h new file mode 100644 index 00000000000..ebf6f710e23 --- /dev/null +++ b/drivers/mtd/devices/bcm47xxsflash.h @@ -0,0 +1,15 @@ +#ifndef __BCM47XXSFLASH_H +#define __BCM47XXSFLASH_H + +#include <linux/mtd/mtd.h> + +struct bcm47xxsflash { + u32 window; + u32 blocksize; + u16 numblocks; + u32 size; + + struct mtd_info mtd; +}; + +#endif /* BCM47XXSFLASH */ diff --git a/drivers/mtd/devices/elm.c b/drivers/mtd/devices/elm.c new file mode 100644 index 00000000000..2ec5da9ee24 --- /dev/null +++ b/drivers/mtd/devices/elm.c @@ -0,0 +1,404 @@ +/* + * Error Location Module + * + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <linux/platform_device.h> +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/of.h> +#include <linux/pm_runtime.h> +#include <linux/platform_data/elm.h> + +#define ELM_IRQSTATUS 0x018 +#define ELM_IRQENABLE 0x01c +#define ELM_LOCATION_CONFIG 0x020 +#define ELM_PAGE_CTRL 0x080 +#define ELM_SYNDROME_FRAGMENT_0 0x400 +#define ELM_SYNDROME_FRAGMENT_6 0x418 +#define ELM_LOCATION_STATUS 0x800 +#define ELM_ERROR_LOCATION_0 0x880 + +/* ELM Interrupt Status Register */ +#define INTR_STATUS_PAGE_VALID BIT(8) + +/* ELM Interrupt Enable Register */ +#define INTR_EN_PAGE_MASK BIT(8) + +/* ELM Location Configuration Register */ +#define ECC_BCH_LEVEL_MASK 0x3 + +/* ELM syndrome */ +#define ELM_SYNDROME_VALID BIT(16) + +/* ELM_LOCATION_STATUS Register */ +#define ECC_CORRECTABLE_MASK BIT(8) +#define ECC_NB_ERRORS_MASK 0x1f + +/* ELM_ERROR_LOCATION_0-15 Registers */ +#define ECC_ERROR_LOCATION_MASK 0x1fff + +#define ELM_ECC_SIZE 0x7ff + +#define SYNDROME_FRAGMENT_REG_SIZE 0x40 +#define ERROR_LOCATION_SIZE 0x100 + +struct elm_info { + struct device *dev; + void __iomem *elm_base; + struct completion elm_completion; + struct list_head list; + enum bch_ecc bch_type; +}; + +static LIST_HEAD(elm_devices); + +static void elm_write_reg(struct elm_info *info, int offset, u32 val) +{ + writel(val, info->elm_base + offset); +} + +static u32 elm_read_reg(struct elm_info *info, int offset) +{ + return readl(info->elm_base + offset); +} + +/** + * elm_config - Configure ELM module + * @dev: ELM device + * @bch_type: Type of BCH ecc + */ +void elm_config(struct device *dev, enum bch_ecc bch_type) +{ + u32 reg_val; + struct elm_info *info = dev_get_drvdata(dev); + + reg_val = (bch_type & ECC_BCH_LEVEL_MASK) | (ELM_ECC_SIZE << 16); + elm_write_reg(info, ELM_LOCATION_CONFIG, reg_val); + info->bch_type = bch_type; +} +EXPORT_SYMBOL(elm_config); + +/** + * elm_configure_page_mode - Enable/Disable page mode + * @info: elm info + * @index: index number of syndrome fragment vector + * @enable: enable/disable flag for page mode + * + * Enable page mode for syndrome fragment index + */ +static void elm_configure_page_mode(struct elm_info *info, int index, + bool enable) +{ + u32 reg_val; + + reg_val = elm_read_reg(info, ELM_PAGE_CTRL); + if (enable) + reg_val |= BIT(index); /* enable page mode */ + else + reg_val &= ~BIT(index); /* disable page mode */ + + elm_write_reg(info, ELM_PAGE_CTRL, reg_val); +} + +/** + * elm_load_syndrome - Load ELM syndrome reg + * @info: elm info + * @err_vec: elm error vectors + * @ecc: buffer with calculated ecc + * + * Load syndrome fragment registers with calculated ecc in reverse order. + */ +static void elm_load_syndrome(struct elm_info *info, + struct elm_errorvec *err_vec, u8 *ecc) +{ + int i, offset; + u32 val; + + for (i = 0; i < ERROR_VECTOR_MAX; i++) { + + /* Check error reported */ + if (err_vec[i].error_reported) { + elm_configure_page_mode(info, i, true); + offset = ELM_SYNDROME_FRAGMENT_0 + + SYNDROME_FRAGMENT_REG_SIZE * i; + + /* BCH8 */ + if (info->bch_type) { + + /* syndrome fragment 0 = ecc[9-12B] */ + val = cpu_to_be32(*(u32 *) &ecc[9]); + elm_write_reg(info, offset, val); + + /* syndrome fragment 1 = ecc[5-8B] */ + offset += 4; + val = cpu_to_be32(*(u32 *) &ecc[5]); + elm_write_reg(info, offset, val); + + /* syndrome fragment 2 = ecc[1-4B] */ + offset += 4; + val = cpu_to_be32(*(u32 *) &ecc[1]); + elm_write_reg(info, offset, val); + + /* syndrome fragment 3 = ecc[0B] */ + offset += 4; + val = ecc[0]; + elm_write_reg(info, offset, val); + } else { + /* syndrome fragment 0 = ecc[20-52b] bits */ + val = (cpu_to_be32(*(u32 *) &ecc[3]) >> 4) | + ((ecc[2] & 0xf) << 28); + elm_write_reg(info, offset, val); + + /* syndrome fragment 1 = ecc[0-20b] bits */ + offset += 4; + val = cpu_to_be32(*(u32 *) &ecc[0]) >> 12; + elm_write_reg(info, offset, val); + } + } + + /* Update ecc pointer with ecc byte size */ + ecc += info->bch_type ? BCH8_SIZE : BCH4_SIZE; + } +} + +/** + * elm_start_processing - start elm syndrome processing + * @info: elm info + * @err_vec: elm error vectors + * + * Set syndrome valid bit for syndrome fragment registers for which + * elm syndrome fragment registers are loaded. This enables elm module + * to start processing syndrome vectors. + */ +static void elm_start_processing(struct elm_info *info, + struct elm_errorvec *err_vec) +{ + int i, offset; + u32 reg_val; + + /* + * Set syndrome vector valid, so that ELM module + * will process it for vectors error is reported + */ + for (i = 0; i < ERROR_VECTOR_MAX; i++) { + if (err_vec[i].error_reported) { + offset = ELM_SYNDROME_FRAGMENT_6 + + SYNDROME_FRAGMENT_REG_SIZE * i; + reg_val = elm_read_reg(info, offset); + reg_val |= ELM_SYNDROME_VALID; + elm_write_reg(info, offset, reg_val); + } + } +} + +/** + * elm_error_correction - locate correctable error position + * @info: elm info + * @err_vec: elm error vectors + * + * On completion of processing by elm module, error location status + * register updated with correctable/uncorrectable error information. + * In case of correctable errors, number of errors located from + * elm location status register & read the positions from + * elm error location register. + */ +static void elm_error_correction(struct elm_info *info, + struct elm_errorvec *err_vec) +{ + int i, j, errors = 0; + int offset; + u32 reg_val; + + for (i = 0; i < ERROR_VECTOR_MAX; i++) { + + /* Check error reported */ + if (err_vec[i].error_reported) { + offset = ELM_LOCATION_STATUS + ERROR_LOCATION_SIZE * i; + reg_val = elm_read_reg(info, offset); + + /* Check correctable error or not */ + if (reg_val & ECC_CORRECTABLE_MASK) { + offset = ELM_ERROR_LOCATION_0 + + ERROR_LOCATION_SIZE * i; + + /* Read count of correctable errors */ + err_vec[i].error_count = reg_val & + ECC_NB_ERRORS_MASK; + + /* Update the error locations in error vector */ + for (j = 0; j < err_vec[i].error_count; j++) { + + reg_val = elm_read_reg(info, offset); + err_vec[i].error_loc[j] = reg_val & + ECC_ERROR_LOCATION_MASK; + + /* Update error location register */ + offset += 4; + } + + errors += err_vec[i].error_count; + } else { + err_vec[i].error_uncorrectable = true; + } + + /* Clearing interrupts for processed error vectors */ + elm_write_reg(info, ELM_IRQSTATUS, BIT(i)); + + /* Disable page mode */ + elm_configure_page_mode(info, i, false); + } + } +} + +/** + * elm_decode_bch_error_page - Locate error position + * @dev: device pointer + * @ecc_calc: calculated ECC bytes from GPMC + * @err_vec: elm error vectors + * + * Called with one or more error reported vectors & vectors with + * error reported is updated in err_vec[].error_reported + */ +void elm_decode_bch_error_page(struct device *dev, u8 *ecc_calc, + struct elm_errorvec *err_vec) +{ + struct elm_info *info = dev_get_drvdata(dev); + u32 reg_val; + + /* Enable page mode interrupt */ + reg_val = elm_read_reg(info, ELM_IRQSTATUS); + elm_write_reg(info, ELM_IRQSTATUS, reg_val & INTR_STATUS_PAGE_VALID); + elm_write_reg(info, ELM_IRQENABLE, INTR_EN_PAGE_MASK); + + /* Load valid ecc byte to syndrome fragment register */ + elm_load_syndrome(info, err_vec, ecc_calc); + + /* Enable syndrome processing for which syndrome fragment is updated */ + elm_start_processing(info, err_vec); + + /* Wait for ELM module to finish locating error correction */ + wait_for_completion(&info->elm_completion); + + /* Disable page mode interrupt */ + reg_val = elm_read_reg(info, ELM_IRQENABLE); + elm_write_reg(info, ELM_IRQENABLE, reg_val & ~INTR_EN_PAGE_MASK); + elm_error_correction(info, err_vec); +} +EXPORT_SYMBOL(elm_decode_bch_error_page); + +static irqreturn_t elm_isr(int this_irq, void *dev_id) +{ + u32 reg_val; + struct elm_info *info = dev_id; + + reg_val = elm_read_reg(info, ELM_IRQSTATUS); + + /* All error vectors processed */ + if (reg_val & INTR_STATUS_PAGE_VALID) { + elm_write_reg(info, ELM_IRQSTATUS, + reg_val & INTR_STATUS_PAGE_VALID); + complete(&info->elm_completion); + return IRQ_HANDLED; + } + + return IRQ_NONE; +} + +static int elm_probe(struct platform_device *pdev) +{ + int ret = 0; + struct resource *res, *irq; + struct elm_info *info; + + info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL); + if (!info) { + dev_err(&pdev->dev, "failed to allocate memory\n"); + return -ENOMEM; + } + + info->dev = &pdev->dev; + + irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + if (!irq) { + dev_err(&pdev->dev, "no irq resource defined\n"); + return -ENODEV; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(&pdev->dev, "no memory resource defined\n"); + return -ENODEV; + } + + info->elm_base = devm_request_and_ioremap(&pdev->dev, res); + if (!info->elm_base) + return -EADDRNOTAVAIL; + + ret = devm_request_irq(&pdev->dev, irq->start, elm_isr, 0, + pdev->name, info); + if (ret) { + dev_err(&pdev->dev, "failure requesting irq %i\n", irq->start); + return ret; + } + + pm_runtime_enable(&pdev->dev); + if (pm_runtime_get_sync(&pdev->dev)) { + ret = -EINVAL; + pm_runtime_disable(&pdev->dev); + dev_err(&pdev->dev, "can't enable clock\n"); + return ret; + } + + init_completion(&info->elm_completion); + INIT_LIST_HEAD(&info->list); + list_add(&info->list, &elm_devices); + platform_set_drvdata(pdev, info); + return ret; +} + +static int elm_remove(struct platform_device *pdev) +{ + pm_runtime_put_sync(&pdev->dev); + pm_runtime_disable(&pdev->dev); + platform_set_drvdata(pdev, NULL); + return 0; +} + +#ifdef CONFIG_OF +static const struct of_device_id elm_of_match[] = { + { .compatible = "ti,am3352-elm" }, + {}, +}; +MODULE_DEVICE_TABLE(of, elm_of_match); +#endif + +static struct platform_driver elm_driver = { + .driver = { + .name = "elm", + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(elm_of_match), + }, + .probe = elm_probe, + .remove = elm_remove, +}; + +module_platform_driver(elm_driver); + +MODULE_DESCRIPTION("ELM driver for BCH error correction"); +MODULE_AUTHOR("Texas Instruments"); +MODULE_ALIAS("platform: elm"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c index 4eeeb2d7f6e..5b6b0728be2 100644 --- a/drivers/mtd/devices/m25p80.c +++ b/drivers/mtd/devices/m25p80.c @@ -565,6 +565,96 @@ time_out: return ret; } +static int m25p80_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len) +{ + struct m25p *flash = mtd_to_m25p(mtd); + uint32_t offset = ofs; + uint8_t status_old, status_new; + int res = 0; + + mutex_lock(&flash->lock); + /* Wait until finished previous command */ + if (wait_till_ready(flash)) { + res = 1; + goto err; + } + + status_old = read_sr(flash); + + if (offset < flash->mtd.size-(flash->mtd.size/2)) + status_new = status_old | SR_BP2 | SR_BP1 | SR_BP0; + else if (offset < flash->mtd.size-(flash->mtd.size/4)) + status_new = (status_old & ~SR_BP0) | SR_BP2 | SR_BP1; + else if (offset < flash->mtd.size-(flash->mtd.size/8)) + status_new = (status_old & ~SR_BP1) | SR_BP2 | SR_BP0; + else if (offset < flash->mtd.size-(flash->mtd.size/16)) + status_new = (status_old & ~(SR_BP0|SR_BP1)) | SR_BP2; + else if (offset < flash->mtd.size-(flash->mtd.size/32)) + status_new = (status_old & ~SR_BP2) | SR_BP1 | SR_BP0; + else if (offset < flash->mtd.size-(flash->mtd.size/64)) + status_new = (status_old & ~(SR_BP2|SR_BP0)) | SR_BP1; + else + status_new = (status_old & ~(SR_BP2|SR_BP1)) | SR_BP0; + + /* Only modify protection if it will not unlock other areas */ + if ((status_new&(SR_BP2|SR_BP1|SR_BP0)) > + (status_old&(SR_BP2|SR_BP1|SR_BP0))) { + write_enable(flash); + if (write_sr(flash, status_new) < 0) { + res = 1; + goto err; + } + } + +err: mutex_unlock(&flash->lock); + return res; +} + +static int m25p80_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len) +{ + struct m25p *flash = mtd_to_m25p(mtd); + uint32_t offset = ofs; + uint8_t status_old, status_new; + int res = 0; + + mutex_lock(&flash->lock); + /* Wait until finished previous command */ + if (wait_till_ready(flash)) { + res = 1; + goto err; + } + + status_old = read_sr(flash); + + if (offset+len > flash->mtd.size-(flash->mtd.size/64)) + status_new = status_old & ~(SR_BP2|SR_BP1|SR_BP0); + else if (offset+len > flash->mtd.size-(flash->mtd.size/32)) + status_new = (status_old & ~(SR_BP2|SR_BP1)) | SR_BP0; + else if (offset+len > flash->mtd.size-(flash->mtd.size/16)) + status_new = (status_old & ~(SR_BP2|SR_BP0)) | SR_BP1; + else if (offset+len > flash->mtd.size-(flash->mtd.size/8)) + status_new = (status_old & ~SR_BP2) | SR_BP1 | SR_BP0; + else if (offset+len > flash->mtd.size-(flash->mtd.size/4)) + status_new = (status_old & ~(SR_BP0|SR_BP1)) | SR_BP2; + else if (offset+len > flash->mtd.size-(flash->mtd.size/2)) + status_new = (status_old & ~SR_BP1) | SR_BP2 | SR_BP0; + else + status_new = (status_old & ~SR_BP0) | SR_BP2 | SR_BP1; + + /* Only modify protection if it will not lock other areas */ + if ((status_new&(SR_BP2|SR_BP1|SR_BP0)) < + (status_old&(SR_BP2|SR_BP1|SR_BP0))) { + write_enable(flash); + if (write_sr(flash, status_new) < 0) { + res = 1; + goto err; + } + } + +err: mutex_unlock(&flash->lock); + return res; +} + /****************************************************************************/ /* @@ -642,6 +732,10 @@ static const struct spi_device_id m25p_ids[] = { /* Everspin */ { "mr25h256", CAT25_INFO( 32 * 1024, 1, 256, 2) }, + /* GigaDevice */ + { "gd25q32", INFO(0xc84016, 0, 64 * 1024, 64, SECT_4K) }, + { "gd25q64", INFO(0xc84017, 0, 64 * 1024, 128, SECT_4K) }, + /* Intel/Numonyx -- xxxs33b */ { "160s33b", INFO(0x898911, 0, 64 * 1024, 32, 0) }, { "320s33b", INFO(0x898912, 0, 64 * 1024, 64, 0) }, @@ -899,6 +993,12 @@ static int m25p_probe(struct spi_device *spi) flash->mtd._erase = m25p80_erase; flash->mtd._read = m25p80_read; + /* flash protection support for STmicro chips */ + if (JEDEC_MFR(info->jedec_id) == CFI_MFR_ST) { + flash->mtd._lock = m25p80_lock; + flash->mtd._unlock = m25p80_unlock; + } + /* sst flash chips use AAI word program */ if (JEDEC_MFR(info->jedec_id) == CFI_MFR_SST) flash->mtd._write = sst_write; diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig index 62ba82c396c..3ed17c4d435 100644 --- a/drivers/mtd/maps/Kconfig +++ b/drivers/mtd/maps/Kconfig @@ -429,7 +429,7 @@ config MTD_GPIO_ADDR config MTD_UCLINUX bool "Generic uClinux RAM/ROM filesystem support" - depends on MTD_RAM=y && (!MMU || COLDFIRE) + depends on (MTD_RAM=y || MTD_ROM=y) && (!MMU || COLDFIRE) help Map driver to support image based filesystems for uClinux. diff --git a/drivers/mtd/maps/physmap_of.c b/drivers/mtd/maps/physmap_of.c index 7901d72c924..363939dfad0 100644 --- a/drivers/mtd/maps/physmap_of.c +++ b/drivers/mtd/maps/physmap_of.c @@ -68,9 +68,6 @@ static int of_flash_remove(struct platform_device *dev) kfree(info->list[i].res); } } - - kfree(info); - return 0; } @@ -199,8 +196,9 @@ static int of_flash_probe(struct platform_device *dev) map_indirect = of_property_read_bool(dp, "no-unaligned-direct-access"); err = -ENOMEM; - info = kzalloc(sizeof(struct of_flash) + - sizeof(struct of_flash_list) * count, GFP_KERNEL); + info = devm_kzalloc(&dev->dev, + sizeof(struct of_flash) + + sizeof(struct of_flash_list) * count, GFP_KERNEL); if (!info) goto err_flash_remove; @@ -241,6 +239,7 @@ static int of_flash_probe(struct platform_device *dev) info->list[i].map.phys = res.start; info->list[i].map.size = res_size; info->list[i].map.bankwidth = be32_to_cpup(width); + info->list[i].map.device_node = dp; err = -ENOMEM; info->list[i].map.virt = ioremap(info->list[i].map.phys, diff --git a/drivers/mtd/maps/uclinux.c b/drivers/mtd/maps/uclinux.c index 299bf88a6f4..c1af83db520 100644 --- a/drivers/mtd/maps/uclinux.c +++ b/drivers/mtd/maps/uclinux.c @@ -23,12 +23,26 @@ /****************************************************************************/ +#ifdef CONFIG_MTD_ROM +#define MAP_NAME "rom" +#else +#define MAP_NAME "ram" +#endif + +/* + * Blackfin uses uclinux_ram_map during startup, so it must not be static. + * Provide a dummy declaration to make sparse happy. + */ +extern struct map_info uclinux_ram_map; + struct map_info uclinux_ram_map = { - .name = "RAM", - .phys = (unsigned long)__bss_stop, + .name = MAP_NAME, .size = 0, }; +static unsigned long physaddr = -1; +module_param(physaddr, ulong, S_IRUGO); + static struct mtd_info *uclinux_ram_mtdinfo; /****************************************************************************/ @@ -60,11 +74,17 @@ static int __init uclinux_mtd_init(void) struct map_info *mapp; mapp = &uclinux_ram_map; + + if (physaddr == -1) + mapp->phys = (resource_size_t)__bss_stop; + else + mapp->phys = physaddr; + if (!mapp->size) mapp->size = PAGE_ALIGN(ntohl(*((unsigned long *)(mapp->phys + 8)))); mapp->bankwidth = 4; - printk("uclinux[mtd]: RAM probe address=0x%x size=0x%x\n", + printk("uclinux[mtd]: probe address=0x%x size=0x%x\n", (int) mapp->phys, (int) mapp->size); /* @@ -82,7 +102,7 @@ static int __init uclinux_mtd_init(void) simple_map_init(mapp); - mtd = do_map_probe("map_ram", mapp); + mtd = do_map_probe("map_" MAP_NAME, mapp); if (!mtd) { printk("uclinux[mtd]: failed to find a mapping?\n"); return(-ENXIO); @@ -118,6 +138,6 @@ module_exit(uclinux_mtd_cleanup); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Greg Ungerer <gerg@snapgear.com>"); -MODULE_DESCRIPTION("Generic RAM based MTD for uClinux"); +MODULE_DESCRIPTION("Generic MTD for uClinux"); /****************************************************************************/ diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c index c516a940808..ffcbcca2fd2 100644 --- a/drivers/mtd/nand/atmel_nand.c +++ b/drivers/mtd/nand/atmel_nand.c @@ -101,6 +101,8 @@ struct atmel_nand_host { u8 pmecc_corr_cap; u16 pmecc_sector_size; u32 pmecc_lookup_table_offset; + u32 pmecc_lookup_table_offset_512; + u32 pmecc_lookup_table_offset_1024; int pmecc_bytes_per_sector; int pmecc_sector_number; @@ -908,6 +910,84 @@ static void atmel_pmecc_core_init(struct mtd_info *mtd) pmecc_writel(host->ecc, CTRL, PMECC_CTRL_ENABLE); } +/* + * Get ECC requirement in ONFI parameters, returns -1 if ONFI + * parameters is not supported. + * return 0 if success to get the ECC requirement. + */ +static int get_onfi_ecc_param(struct nand_chip *chip, + int *ecc_bits, int *sector_size) +{ + *ecc_bits = *sector_size = 0; + + if (chip->onfi_params.ecc_bits == 0xff) + /* TODO: the sector_size and ecc_bits need to be find in + * extended ecc parameter, currently we don't support it. + */ + return -1; + + *ecc_bits = chip->onfi_params.ecc_bits; + + /* The default sector size (ecc codeword size) is 512 */ + *sector_size = 512; + + return 0; +} + +/* + * Get ecc requirement from ONFI parameters ecc requirement. + * If pmecc-cap, pmecc-sector-size in DTS are not specified, this function + * will set them according to ONFI ecc requirement. Otherwise, use the + * value in DTS file. + * return 0 if success. otherwise return error code. + */ +static int pmecc_choose_ecc(struct atmel_nand_host *host, + int *cap, int *sector_size) +{ + /* Get ECC requirement from ONFI parameters */ + *cap = *sector_size = 0; + if (host->nand_chip.onfi_version) { + if (!get_onfi_ecc_param(&host->nand_chip, cap, sector_size)) + dev_info(host->dev, "ONFI params, minimum required ECC: %d bits in %d bytes\n", + *cap, *sector_size); + else + dev_info(host->dev, "NAND chip ECC reqirement is in Extended ONFI parameter, we don't support yet.\n"); + } else { + dev_info(host->dev, "NAND chip is not ONFI compliant, assume ecc_bits is 2 in 512 bytes"); + } + if (*cap == 0 && *sector_size == 0) { + *cap = 2; + *sector_size = 512; + } + + /* If dts file doesn't specify then use the one in ONFI parameters */ + if (host->pmecc_corr_cap == 0) { + /* use the most fitable ecc bits (the near bigger one ) */ + if (*cap <= 2) + host->pmecc_corr_cap = 2; + else if (*cap <= 4) + host->pmecc_corr_cap = 4; + else if (*cap < 8) + host->pmecc_corr_cap = 8; + else if (*cap < 12) + host->pmecc_corr_cap = 12; + else if (*cap < 24) + host->pmecc_corr_cap = 24; + else + return -EINVAL; + } + if (host->pmecc_sector_size == 0) { + /* use the most fitable sector size (the near smaller one ) */ + if (*sector_size >= 1024) + host->pmecc_sector_size = 1024; + else if (*sector_size >= 512) + host->pmecc_sector_size = 512; + else + return -EINVAL; + } + return 0; +} + static int __init atmel_pmecc_nand_init_params(struct platform_device *pdev, struct atmel_nand_host *host) { @@ -916,8 +996,22 @@ static int __init atmel_pmecc_nand_init_params(struct platform_device *pdev, struct resource *regs, *regs_pmerr, *regs_rom; int cap, sector_size, err_no; + err_no = pmecc_choose_ecc(host, &cap, §or_size); + if (err_no) { + dev_err(host->dev, "The NAND flash's ECC requirement are not support!"); + return err_no; + } + + if (cap != host->pmecc_corr_cap || + sector_size != host->pmecc_sector_size) + dev_info(host->dev, "WARNING: Be Caution! Using different PMECC parameters from Nand ONFI ECC reqirement.\n"); + cap = host->pmecc_corr_cap; sector_size = host->pmecc_sector_size; + host->pmecc_lookup_table_offset = (sector_size == 512) ? + host->pmecc_lookup_table_offset_512 : + host->pmecc_lookup_table_offset_1024; + dev_info(host->dev, "Initialize PMECC params, cap: %d, sector: %d\n", cap, sector_size); @@ -1215,7 +1309,7 @@ static void atmel_nand_hwctl(struct mtd_info *mtd, int mode) static int atmel_of_init_port(struct atmel_nand_host *host, struct device_node *np) { - u32 val, table_offset; + u32 val; u32 offset[2]; int ecc_mode; struct atmel_nand_data *board = &host->board; @@ -1259,42 +1353,41 @@ static int atmel_of_init_port(struct atmel_nand_host *host, /* use PMECC, get correction capability, sector size and lookup * table offset. + * If correction bits and sector size are not specified, then find + * them from NAND ONFI parameters. */ - if (of_property_read_u32(np, "atmel,pmecc-cap", &val) != 0) { - dev_err(host->dev, "Cannot decide PMECC Capability\n"); - return -EINVAL; - } else if ((val != 2) && (val != 4) && (val != 8) && (val != 12) && - (val != 24)) { - dev_err(host->dev, - "Unsupported PMECC correction capability: %d; should be 2, 4, 8, 12 or 24\n", - val); - return -EINVAL; + if (of_property_read_u32(np, "atmel,pmecc-cap", &val) == 0) { + if ((val != 2) && (val != 4) && (val != 8) && (val != 12) && + (val != 24)) { + dev_err(host->dev, + "Unsupported PMECC correction capability: %d; should be 2, 4, 8, 12 or 24\n", + val); + return -EINVAL; + } + host->pmecc_corr_cap = (u8)val; } - host->pmecc_corr_cap = (u8)val; - if (of_property_read_u32(np, "atmel,pmecc-sector-size", &val) != 0) { - dev_err(host->dev, "Cannot decide PMECC Sector Size\n"); - return -EINVAL; - } else if ((val != 512) && (val != 1024)) { - dev_err(host->dev, - "Unsupported PMECC sector size: %d; should be 512 or 1024 bytes\n", - val); - return -EINVAL; + if (of_property_read_u32(np, "atmel,pmecc-sector-size", &val) == 0) { + if ((val != 512) && (val != 1024)) { + dev_err(host->dev, + "Unsupported PMECC sector size: %d; should be 512 or 1024 bytes\n", + val); + return -EINVAL; + } + host->pmecc_sector_size = (u16)val; } - host->pmecc_sector_size = (u16)val; if (of_property_read_u32_array(np, "atmel,pmecc-lookup-table-offset", offset, 2) != 0) { dev_err(host->dev, "Cannot get PMECC lookup table offset\n"); return -EINVAL; } - table_offset = host->pmecc_sector_size == 512 ? offset[0] : offset[1]; - - if (!table_offset) { + if (!offset[0] && !offset[1]) { dev_err(host->dev, "Invalid PMECC lookup table offset\n"); return -EINVAL; } - host->pmecc_lookup_table_offset = table_offset; + host->pmecc_lookup_table_offset_512 = offset[0]; + host->pmecc_lookup_table_offset_1024 = offset[1]; return 0; } diff --git a/drivers/mtd/nand/bcm47xxnflash/bcm47xxnflash.h b/drivers/mtd/nand/bcm47xxnflash/bcm47xxnflash.h index 0bdb2ce4da7..c005a62330b 100644 --- a/drivers/mtd/nand/bcm47xxnflash/bcm47xxnflash.h +++ b/drivers/mtd/nand/bcm47xxnflash/bcm47xxnflash.h @@ -1,6 +1,10 @@ #ifndef __BCM47XXNFLASH_H #define __BCM47XXNFLASH_H +#ifndef pr_fmt +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt +#endif + #include <linux/mtd/mtd.h> #include <linux/mtd/nand.h> diff --git a/drivers/mtd/nand/bcm47xxnflash/main.c b/drivers/mtd/nand/bcm47xxnflash/main.c index 8363a9a5fa3..7bae569fdc7 100644 --- a/drivers/mtd/nand/bcm47xxnflash/main.c +++ b/drivers/mtd/nand/bcm47xxnflash/main.c @@ -9,14 +9,14 @@ * */ +#include "bcm47xxnflash.h" + #include <linux/module.h> #include <linux/kernel.h> #include <linux/slab.h> #include <linux/platform_device.h> #include <linux/bcma/bcma.h> -#include "bcm47xxnflash.h" - MODULE_DESCRIPTION("NAND flash driver for BCMA bus"); MODULE_LICENSE("GPL"); MODULE_AUTHOR("RafaÅ‚ MiÅ‚ecki"); @@ -77,6 +77,7 @@ static int bcm47xxnflash_remove(struct platform_device *pdev) } static struct platform_driver bcm47xxnflash_driver = { + .probe = bcm47xxnflash_probe, .remove = bcm47xxnflash_remove, .driver = { .name = "bcma_nflash", @@ -88,13 +89,10 @@ static int __init bcm47xxnflash_init(void) { int err; - /* - * Platform device "bcma_nflash" exists on SoCs and is registered very - * early, it won't be added during runtime (use platform_driver_probe). - */ - err = platform_driver_probe(&bcm47xxnflash_driver, bcm47xxnflash_probe); + err = platform_driver_register(&bcm47xxnflash_driver); if (err) - pr_err("Failed to register serial flash driver: %d\n", err); + pr_err("Failed to register bcm47xx nand flash driver: %d\n", + err); return err; } diff --git a/drivers/mtd/nand/bcm47xxnflash/ops_bcm4706.c b/drivers/mtd/nand/bcm47xxnflash/ops_bcm4706.c index 595de4012e7..b2ab373c9ee 100644 --- a/drivers/mtd/nand/bcm47xxnflash/ops_bcm4706.c +++ b/drivers/mtd/nand/bcm47xxnflash/ops_bcm4706.c @@ -9,13 +9,13 @@ * */ +#include "bcm47xxnflash.h" + #include <linux/module.h> #include <linux/kernel.h> #include <linux/slab.h> #include <linux/bcma/bcma.h> -#include "bcm47xxnflash.h" - /* Broadcom uses 1'000'000 but it seems to be too many. Tests on WNDR4500 has * shown ~1000 retries as maxiumum. */ #define NFLASH_READY_RETRIES 10000 diff --git a/drivers/mtd/nand/davinci_nand.c b/drivers/mtd/nand/davinci_nand.c index feae55c7b88..94e17af8e45 100644 --- a/drivers/mtd/nand/davinci_nand.c +++ b/drivers/mtd/nand/davinci_nand.c @@ -606,7 +606,7 @@ static int __init nand_davinci_probe(struct platform_device *pdev) if (pdev->id < 0 || pdev->id > 3) return -ENODEV; - info = kzalloc(sizeof(*info), GFP_KERNEL); + info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL); if (!info) { dev_err(&pdev->dev, "unable to allocate memory\n"); ret = -ENOMEM; @@ -623,11 +623,11 @@ static int __init nand_davinci_probe(struct platform_device *pdev) goto err_nomem; } - vaddr = ioremap(res1->start, resource_size(res1)); - base = ioremap(res2->start, resource_size(res2)); + vaddr = devm_request_and_ioremap(&pdev->dev, res1); + base = devm_request_and_ioremap(&pdev->dev, res2); if (!vaddr || !base) { dev_err(&pdev->dev, "ioremap failed\n"); - ret = -EINVAL; + ret = -EADDRNOTAVAIL; goto err_ioremap; } @@ -717,7 +717,7 @@ static int __init nand_davinci_probe(struct platform_device *pdev) } info->chip.ecc.mode = ecc_mode; - info->clk = clk_get(&pdev->dev, "aemif"); + info->clk = devm_clk_get(&pdev->dev, "aemif"); if (IS_ERR(info->clk)) { ret = PTR_ERR(info->clk); dev_dbg(&pdev->dev, "unable to get AEMIF clock, err %d\n", ret); @@ -845,8 +845,6 @@ err_timing: clk_disable_unprepare(info->clk); err_clk_enable: - clk_put(info->clk); - spin_lock_irq(&davinci_nand_lock); if (ecc_mode == NAND_ECC_HW_SYNDROME) ecc4_busy = false; @@ -855,13 +853,7 @@ err_clk_enable: err_ecc: err_clk: err_ioremap: - if (base) - iounmap(base); - if (vaddr) - iounmap(vaddr); - err_nomem: - kfree(info); return ret; } @@ -874,15 +866,9 @@ static int __exit nand_davinci_remove(struct platform_device *pdev) ecc4_busy = false; spin_unlock_irq(&davinci_nand_lock); - iounmap(info->base); - iounmap(info->vaddr); - nand_release(&info->mtd); clk_disable_unprepare(info->clk); - clk_put(info->clk); - - kfree(info); return 0; } diff --git a/drivers/mtd/nand/fsl_ifc_nand.c b/drivers/mtd/nand/fsl_ifc_nand.c index ad6222627fe..f1f7f12ab50 100644 --- a/drivers/mtd/nand/fsl_ifc_nand.c +++ b/drivers/mtd/nand/fsl_ifc_nand.c @@ -176,8 +176,8 @@ static void set_addr(struct mtd_info *mtd, int column, int page_addr, int oob) ifc_nand_ctrl->page = page_addr; /* Program ROW0/COL0 */ - out_be32(&ifc->ifc_nand.row0, page_addr); - out_be32(&ifc->ifc_nand.col0, (oob ? IFC_NAND_COL_MS : 0) | column); + iowrite32be(page_addr, &ifc->ifc_nand.row0); + iowrite32be((oob ? IFC_NAND_COL_MS : 0) | column, &ifc->ifc_nand.col0); buf_num = page_addr & priv->bufnum_mask; @@ -239,18 +239,19 @@ static void fsl_ifc_run_command(struct mtd_info *mtd) int i; /* set the chip select for NAND Transaction */ - out_be32(&ifc->ifc_nand.nand_csel, priv->bank << IFC_NAND_CSEL_SHIFT); + iowrite32be(priv->bank << IFC_NAND_CSEL_SHIFT, + &ifc->ifc_nand.nand_csel); dev_vdbg(priv->dev, "%s: fir0=%08x fcr0=%08x\n", __func__, - in_be32(&ifc->ifc_nand.nand_fir0), - in_be32(&ifc->ifc_nand.nand_fcr0)); + ioread32be(&ifc->ifc_nand.nand_fir0), + ioread32be(&ifc->ifc_nand.nand_fcr0)); ctrl->nand_stat = 0; /* start read/write seq */ - out_be32(&ifc->ifc_nand.nandseq_strt, IFC_NAND_SEQ_STRT_FIR_STRT); + iowrite32be(IFC_NAND_SEQ_STRT_FIR_STRT, &ifc->ifc_nand.nandseq_strt); /* wait for command complete flag or timeout */ wait_event_timeout(ctrl->nand_wait, ctrl->nand_stat, @@ -273,7 +274,7 @@ static void fsl_ifc_run_command(struct mtd_info *mtd) int sector_end = sector + chip->ecc.steps - 1; for (i = sector / 4; i <= sector_end / 4; i++) - eccstat[i] = in_be32(&ifc->ifc_nand.nand_eccstat[i]); + eccstat[i] = ioread32be(&ifc->ifc_nand.nand_eccstat[i]); for (i = sector; i <= sector_end; i++) { errors = check_read_ecc(mtd, ctrl, eccstat, i); @@ -313,31 +314,33 @@ static void fsl_ifc_do_read(struct nand_chip *chip, /* Program FIR/IFC_NAND_FCR0 for Small/Large page */ if (mtd->writesize > 512) { - out_be32(&ifc->ifc_nand.nand_fir0, - (IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) | - (IFC_FIR_OP_CA0 << IFC_NAND_FIR0_OP1_SHIFT) | - (IFC_FIR_OP_RA0 << IFC_NAND_FIR0_OP2_SHIFT) | - (IFC_FIR_OP_CMD1 << IFC_NAND_FIR0_OP3_SHIFT) | - (IFC_FIR_OP_RBCD << IFC_NAND_FIR0_OP4_SHIFT)); - out_be32(&ifc->ifc_nand.nand_fir1, 0x0); - - out_be32(&ifc->ifc_nand.nand_fcr0, - (NAND_CMD_READ0 << IFC_NAND_FCR0_CMD0_SHIFT) | - (NAND_CMD_READSTART << IFC_NAND_FCR0_CMD1_SHIFT)); + iowrite32be((IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) | + (IFC_FIR_OP_CA0 << IFC_NAND_FIR0_OP1_SHIFT) | + (IFC_FIR_OP_RA0 << IFC_NAND_FIR0_OP2_SHIFT) | + (IFC_FIR_OP_CMD1 << IFC_NAND_FIR0_OP3_SHIFT) | + (IFC_FIR_OP_RBCD << IFC_NAND_FIR0_OP4_SHIFT), + &ifc->ifc_nand.nand_fir0); + iowrite32be(0x0, &ifc->ifc_nand.nand_fir1); + + iowrite32be((NAND_CMD_READ0 << IFC_NAND_FCR0_CMD0_SHIFT) | + (NAND_CMD_READSTART << IFC_NAND_FCR0_CMD1_SHIFT), + &ifc->ifc_nand.nand_fcr0); } else { - out_be32(&ifc->ifc_nand.nand_fir0, - (IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) | - (IFC_FIR_OP_CA0 << IFC_NAND_FIR0_OP1_SHIFT) | - (IFC_FIR_OP_RA0 << IFC_NAND_FIR0_OP2_SHIFT) | - (IFC_FIR_OP_RBCD << IFC_NAND_FIR0_OP3_SHIFT)); - out_be32(&ifc->ifc_nand.nand_fir1, 0x0); + iowrite32be((IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) | + (IFC_FIR_OP_CA0 << IFC_NAND_FIR0_OP1_SHIFT) | + (IFC_FIR_OP_RA0 << IFC_NAND_FIR0_OP2_SHIFT) | + (IFC_FIR_OP_RBCD << IFC_NAND_FIR0_OP3_SHIFT), + &ifc->ifc_nand.nand_fir0); + iowrite32be(0x0, &ifc->ifc_nand.nand_fir1); if (oob) - out_be32(&ifc->ifc_nand.nand_fcr0, - NAND_CMD_READOOB << IFC_NAND_FCR0_CMD0_SHIFT); + iowrite32be(NAND_CMD_READOOB << + IFC_NAND_FCR0_CMD0_SHIFT, + &ifc->ifc_nand.nand_fcr0); else - out_be32(&ifc->ifc_nand.nand_fcr0, - NAND_CMD_READ0 << IFC_NAND_FCR0_CMD0_SHIFT); + iowrite32be(NAND_CMD_READ0 << + IFC_NAND_FCR0_CMD0_SHIFT, + &ifc->ifc_nand.nand_fcr0); } } @@ -357,7 +360,7 @@ static void fsl_ifc_cmdfunc(struct mtd_info *mtd, unsigned int command, switch (command) { /* READ0 read the entire buffer to use hardware ECC. */ case NAND_CMD_READ0: - out_be32(&ifc->ifc_nand.nand_fbcr, 0); + iowrite32be(0, &ifc->ifc_nand.nand_fbcr); set_addr(mtd, 0, page_addr, 0); ifc_nand_ctrl->read_bytes = mtd->writesize + mtd->oobsize; @@ -372,7 +375,7 @@ static void fsl_ifc_cmdfunc(struct mtd_info *mtd, unsigned int command, /* READOOB reads only the OOB because no ECC is performed. */ case NAND_CMD_READOOB: - out_be32(&ifc->ifc_nand.nand_fbcr, mtd->oobsize - column); + iowrite32be(mtd->oobsize - column, &ifc->ifc_nand.nand_fbcr); set_addr(mtd, column, page_addr, 1); ifc_nand_ctrl->read_bytes = mtd->writesize + mtd->oobsize; @@ -388,19 +391,19 @@ static void fsl_ifc_cmdfunc(struct mtd_info *mtd, unsigned int command, if (command == NAND_CMD_PARAM) timing = IFC_FIR_OP_RBCD; - out_be32(&ifc->ifc_nand.nand_fir0, - (IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) | - (IFC_FIR_OP_UA << IFC_NAND_FIR0_OP1_SHIFT) | - (timing << IFC_NAND_FIR0_OP2_SHIFT)); - out_be32(&ifc->ifc_nand.nand_fcr0, - command << IFC_NAND_FCR0_CMD0_SHIFT); - out_be32(&ifc->ifc_nand.row3, column); + iowrite32be((IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) | + (IFC_FIR_OP_UA << IFC_NAND_FIR0_OP1_SHIFT) | + (timing << IFC_NAND_FIR0_OP2_SHIFT), + &ifc->ifc_nand.nand_fir0); + iowrite32be(command << IFC_NAND_FCR0_CMD0_SHIFT, + &ifc->ifc_nand.nand_fcr0); + iowrite32be(column, &ifc->ifc_nand.row3); /* * although currently it's 8 bytes for READID, we always read * the maximum 256 bytes(for PARAM) */ - out_be32(&ifc->ifc_nand.nand_fbcr, 256); + iowrite32be(256, &ifc->ifc_nand.nand_fbcr); ifc_nand_ctrl->read_bytes = 256; set_addr(mtd, 0, 0, 0); @@ -415,16 +418,16 @@ static void fsl_ifc_cmdfunc(struct mtd_info *mtd, unsigned int command, /* ERASE2 uses the block and page address from ERASE1 */ case NAND_CMD_ERASE2: - out_be32(&ifc->ifc_nand.nand_fir0, - (IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) | - (IFC_FIR_OP_RA0 << IFC_NAND_FIR0_OP1_SHIFT) | - (IFC_FIR_OP_CMD1 << IFC_NAND_FIR0_OP2_SHIFT)); + iowrite32be((IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) | + (IFC_FIR_OP_RA0 << IFC_NAND_FIR0_OP1_SHIFT) | + (IFC_FIR_OP_CMD1 << IFC_NAND_FIR0_OP2_SHIFT), + &ifc->ifc_nand.nand_fir0); - out_be32(&ifc->ifc_nand.nand_fcr0, - (NAND_CMD_ERASE1 << IFC_NAND_FCR0_CMD0_SHIFT) | - (NAND_CMD_ERASE2 << IFC_NAND_FCR0_CMD1_SHIFT)); + iowrite32be((NAND_CMD_ERASE1 << IFC_NAND_FCR0_CMD0_SHIFT) | + (NAND_CMD_ERASE2 << IFC_NAND_FCR0_CMD1_SHIFT), + &ifc->ifc_nand.nand_fcr0); - out_be32(&ifc->ifc_nand.nand_fbcr, 0); + iowrite32be(0, &ifc->ifc_nand.nand_fbcr); ifc_nand_ctrl->read_bytes = 0; fsl_ifc_run_command(mtd); return; @@ -440,26 +443,28 @@ static void fsl_ifc_cmdfunc(struct mtd_info *mtd, unsigned int command, (NAND_CMD_SEQIN << IFC_NAND_FCR0_CMD0_SHIFT) | (NAND_CMD_PAGEPROG << IFC_NAND_FCR0_CMD1_SHIFT); - out_be32(&ifc->ifc_nand.nand_fir0, - (IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) | - (IFC_FIR_OP_CA0 << IFC_NAND_FIR0_OP1_SHIFT) | - (IFC_FIR_OP_RA0 << IFC_NAND_FIR0_OP2_SHIFT) | - (IFC_FIR_OP_WBCD << IFC_NAND_FIR0_OP3_SHIFT) | - (IFC_FIR_OP_CW1 << IFC_NAND_FIR0_OP4_SHIFT)); + iowrite32be( + (IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) | + (IFC_FIR_OP_CA0 << IFC_NAND_FIR0_OP1_SHIFT) | + (IFC_FIR_OP_RA0 << IFC_NAND_FIR0_OP2_SHIFT) | + (IFC_FIR_OP_WBCD << IFC_NAND_FIR0_OP3_SHIFT) | + (IFC_FIR_OP_CW1 << IFC_NAND_FIR0_OP4_SHIFT), + &ifc->ifc_nand.nand_fir0); } else { nand_fcr0 = ((NAND_CMD_PAGEPROG << IFC_NAND_FCR0_CMD1_SHIFT) | (NAND_CMD_SEQIN << IFC_NAND_FCR0_CMD2_SHIFT)); - out_be32(&ifc->ifc_nand.nand_fir0, - (IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) | - (IFC_FIR_OP_CMD2 << IFC_NAND_FIR0_OP1_SHIFT) | - (IFC_FIR_OP_CA0 << IFC_NAND_FIR0_OP2_SHIFT) | - (IFC_FIR_OP_RA0 << IFC_NAND_FIR0_OP3_SHIFT) | - (IFC_FIR_OP_WBCD << IFC_NAND_FIR0_OP4_SHIFT)); - out_be32(&ifc->ifc_nand.nand_fir1, - (IFC_FIR_OP_CW1 << IFC_NAND_FIR1_OP5_SHIFT)); + iowrite32be( + (IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) | + (IFC_FIR_OP_CMD2 << IFC_NAND_FIR0_OP1_SHIFT) | + (IFC_FIR_OP_CA0 << IFC_NAND_FIR0_OP2_SHIFT) | + (IFC_FIR_OP_RA0 << IFC_NAND_FIR0_OP3_SHIFT) | + (IFC_FIR_OP_WBCD << IFC_NAND_FIR0_OP4_SHIFT), + &ifc->ifc_nand.nand_fir0); + iowrite32be(IFC_FIR_OP_CW1 << IFC_NAND_FIR1_OP5_SHIFT, + &ifc->ifc_nand.nand_fir1); if (column >= mtd->writesize) nand_fcr0 |= @@ -474,7 +479,7 @@ static void fsl_ifc_cmdfunc(struct mtd_info *mtd, unsigned int command, column -= mtd->writesize; ifc_nand_ctrl->oob = 1; } - out_be32(&ifc->ifc_nand.nand_fcr0, nand_fcr0); + iowrite32be(nand_fcr0, &ifc->ifc_nand.nand_fcr0); set_addr(mtd, column, page_addr, ifc_nand_ctrl->oob); return; } @@ -482,10 +487,11 @@ static void fsl_ifc_cmdfunc(struct mtd_info *mtd, unsigned int command, /* PAGEPROG reuses all of the setup from SEQIN and adds the length */ case NAND_CMD_PAGEPROG: { if (ifc_nand_ctrl->oob) { - out_be32(&ifc->ifc_nand.nand_fbcr, - ifc_nand_ctrl->index - ifc_nand_ctrl->column); + iowrite32be(ifc_nand_ctrl->index - + ifc_nand_ctrl->column, + &ifc->ifc_nand.nand_fbcr); } else { - out_be32(&ifc->ifc_nand.nand_fbcr, 0); + iowrite32be(0, &ifc->ifc_nand.nand_fbcr); } fsl_ifc_run_command(mtd); @@ -493,12 +499,12 @@ static void fsl_ifc_cmdfunc(struct mtd_info *mtd, unsigned int command, } case NAND_CMD_STATUS: - out_be32(&ifc->ifc_nand.nand_fir0, - (IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) | - (IFC_FIR_OP_RB << IFC_NAND_FIR0_OP1_SHIFT)); - out_be32(&ifc->ifc_nand.nand_fcr0, - NAND_CMD_STATUS << IFC_NAND_FCR0_CMD0_SHIFT); - out_be32(&ifc->ifc_nand.nand_fbcr, 1); + iowrite32be((IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) | + (IFC_FIR_OP_RB << IFC_NAND_FIR0_OP1_SHIFT), + &ifc->ifc_nand.nand_fir0); + iowrite32be(NAND_CMD_STATUS << IFC_NAND_FCR0_CMD0_SHIFT, + &ifc->ifc_nand.nand_fcr0); + iowrite32be(1, &ifc->ifc_nand.nand_fbcr); set_addr(mtd, 0, 0, 0); ifc_nand_ctrl->read_bytes = 1; @@ -512,10 +518,10 @@ static void fsl_ifc_cmdfunc(struct mtd_info *mtd, unsigned int command, return; case NAND_CMD_RESET: - out_be32(&ifc->ifc_nand.nand_fir0, - IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT); - out_be32(&ifc->ifc_nand.nand_fcr0, - NAND_CMD_RESET << IFC_NAND_FCR0_CMD0_SHIFT); + iowrite32be(IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT, + &ifc->ifc_nand.nand_fir0); + iowrite32be(NAND_CMD_RESET << IFC_NAND_FCR0_CMD0_SHIFT, + &ifc->ifc_nand.nand_fcr0); fsl_ifc_run_command(mtd); return; @@ -639,18 +645,18 @@ static int fsl_ifc_wait(struct mtd_info *mtd, struct nand_chip *chip) u32 nand_fsr; /* Use READ_STATUS command, but wait for the device to be ready */ - out_be32(&ifc->ifc_nand.nand_fir0, - (IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) | - (IFC_FIR_OP_RDSTAT << IFC_NAND_FIR0_OP1_SHIFT)); - out_be32(&ifc->ifc_nand.nand_fcr0, NAND_CMD_STATUS << - IFC_NAND_FCR0_CMD0_SHIFT); - out_be32(&ifc->ifc_nand.nand_fbcr, 1); + iowrite32be((IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) | + (IFC_FIR_OP_RDSTAT << IFC_NAND_FIR0_OP1_SHIFT), + &ifc->ifc_nand.nand_fir0); + iowrite32be(NAND_CMD_STATUS << IFC_NAND_FCR0_CMD0_SHIFT, + &ifc->ifc_nand.nand_fcr0); + iowrite32be(1, &ifc->ifc_nand.nand_fbcr); set_addr(mtd, 0, 0, 0); ifc_nand_ctrl->read_bytes = 1; fsl_ifc_run_command(mtd); - nand_fsr = in_be32(&ifc->ifc_nand.nand_fsr); + nand_fsr = ioread32be(&ifc->ifc_nand.nand_fsr); /* * The chip always seems to report that it is @@ -744,34 +750,34 @@ static void fsl_ifc_sram_init(struct fsl_ifc_mtd *priv) uint32_t cs = priv->bank; /* Save CSOR and CSOR_ext */ - csor = in_be32(&ifc->csor_cs[cs].csor); - csor_ext = in_be32(&ifc->csor_cs[cs].csor_ext); + csor = ioread32be(&ifc->csor_cs[cs].csor); + csor_ext = ioread32be(&ifc->csor_cs[cs].csor_ext); /* chage PageSize 8K and SpareSize 1K*/ csor_8k = (csor & ~(CSOR_NAND_PGS_MASK)) | 0x0018C000; - out_be32(&ifc->csor_cs[cs].csor, csor_8k); - out_be32(&ifc->csor_cs[cs].csor_ext, 0x0000400); + iowrite32be(csor_8k, &ifc->csor_cs[cs].csor); + iowrite32be(0x0000400, &ifc->csor_cs[cs].csor_ext); /* READID */ - out_be32(&ifc->ifc_nand.nand_fir0, - (IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) | - (IFC_FIR_OP_UA << IFC_NAND_FIR0_OP1_SHIFT) | - (IFC_FIR_OP_RB << IFC_NAND_FIR0_OP2_SHIFT)); - out_be32(&ifc->ifc_nand.nand_fcr0, - NAND_CMD_READID << IFC_NAND_FCR0_CMD0_SHIFT); - out_be32(&ifc->ifc_nand.row3, 0x0); + iowrite32be((IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) | + (IFC_FIR_OP_UA << IFC_NAND_FIR0_OP1_SHIFT) | + (IFC_FIR_OP_RB << IFC_NAND_FIR0_OP2_SHIFT), + &ifc->ifc_nand.nand_fir0); + iowrite32be(NAND_CMD_READID << IFC_NAND_FCR0_CMD0_SHIFT, + &ifc->ifc_nand.nand_fcr0); + iowrite32be(0x0, &ifc->ifc_nand.row3); - out_be32(&ifc->ifc_nand.nand_fbcr, 0x0); + iowrite32be(0x0, &ifc->ifc_nand.nand_fbcr); /* Program ROW0/COL0 */ - out_be32(&ifc->ifc_nand.row0, 0x0); - out_be32(&ifc->ifc_nand.col0, 0x0); + iowrite32be(0x0, &ifc->ifc_nand.row0); + iowrite32be(0x0, &ifc->ifc_nand.col0); /* set the chip select for NAND Transaction */ - out_be32(&ifc->ifc_nand.nand_csel, cs << IFC_NAND_CSEL_SHIFT); + iowrite32be(cs << IFC_NAND_CSEL_SHIFT, &ifc->ifc_nand.nand_csel); /* start read seq */ - out_be32(&ifc->ifc_nand.nandseq_strt, IFC_NAND_SEQ_STRT_FIR_STRT); + iowrite32be(IFC_NAND_SEQ_STRT_FIR_STRT, &ifc->ifc_nand.nandseq_strt); /* wait for command complete flag or timeout */ wait_event_timeout(ctrl->nand_wait, ctrl->nand_stat, @@ -781,8 +787,8 @@ static void fsl_ifc_sram_init(struct fsl_ifc_mtd *priv) printk(KERN_ERR "fsl-ifc: Failed to Initialise SRAM\n"); /* Restore CSOR and CSOR_ext */ - out_be32(&ifc->csor_cs[cs].csor, csor); - out_be32(&ifc->csor_cs[cs].csor_ext, csor_ext); + iowrite32be(csor, &ifc->csor_cs[cs].csor); + iowrite32be(csor_ext, &ifc->csor_cs[cs].csor_ext); } static int fsl_ifc_chip_init(struct fsl_ifc_mtd *priv) @@ -799,7 +805,7 @@ static int fsl_ifc_chip_init(struct fsl_ifc_mtd *priv) /* fill in nand_chip structure */ /* set up function call table */ - if ((in_be32(&ifc->cspr_cs[priv->bank].cspr)) & CSPR_PORT_SIZE_16) + if ((ioread32be(&ifc->cspr_cs[priv->bank].cspr)) & CSPR_PORT_SIZE_16) chip->read_byte = fsl_ifc_read_byte16; else chip->read_byte = fsl_ifc_read_byte; @@ -813,13 +819,13 @@ static int fsl_ifc_chip_init(struct fsl_ifc_mtd *priv) chip->bbt_td = &bbt_main_descr; chip->bbt_md = &bbt_mirror_descr; - out_be32(&ifc->ifc_nand.ncfgr, 0x0); + iowrite32be(0x0, &ifc->ifc_nand.ncfgr); /* set up nand options */ chip->bbt_options = NAND_BBT_USE_FLASH; - if (in_be32(&ifc->cspr_cs[priv->bank].cspr) & CSPR_PORT_SIZE_16) { + if (ioread32be(&ifc->cspr_cs[priv->bank].cspr) & CSPR_PORT_SIZE_16) { chip->read_byte = fsl_ifc_read_byte16; chip->options |= NAND_BUSWIDTH_16; } else { @@ -832,7 +838,7 @@ static int fsl_ifc_chip_init(struct fsl_ifc_mtd *priv) chip->ecc.read_page = fsl_ifc_read_page; chip->ecc.write_page = fsl_ifc_write_page; - csor = in_be32(&ifc->csor_cs[priv->bank].csor); + csor = ioread32be(&ifc->csor_cs[priv->bank].csor); /* Hardware generates ECC per 512 Bytes */ chip->ecc.size = 512; @@ -884,7 +890,7 @@ static int fsl_ifc_chip_init(struct fsl_ifc_mtd *priv) chip->ecc.mode = NAND_ECC_SOFT; } - ver = in_be32(&ifc->ifc_rev); + ver = ioread32be(&ifc->ifc_rev); if (ver == FSL_IFC_V1_1_0) fsl_ifc_sram_init(priv); @@ -910,7 +916,7 @@ static int fsl_ifc_chip_remove(struct fsl_ifc_mtd *priv) static int match_bank(struct fsl_ifc_regs __iomem *ifc, int bank, phys_addr_t addr) { - u32 cspr = in_be32(&ifc->cspr_cs[bank].cspr); + u32 cspr = ioread32be(&ifc->cspr_cs[bank].cspr); if (!(cspr & CSPR_V)) return 0; @@ -997,17 +1003,16 @@ static int fsl_ifc_nand_probe(struct platform_device *dev) dev_set_drvdata(priv->dev, priv); - out_be32(&ifc->ifc_nand.nand_evter_en, - IFC_NAND_EVTER_EN_OPC_EN | - IFC_NAND_EVTER_EN_FTOER_EN | - IFC_NAND_EVTER_EN_WPER_EN); + iowrite32be(IFC_NAND_EVTER_EN_OPC_EN | + IFC_NAND_EVTER_EN_FTOER_EN | + IFC_NAND_EVTER_EN_WPER_EN, + &ifc->ifc_nand.nand_evter_en); /* enable NAND Machine Interrupts */ - out_be32(&ifc->ifc_nand.nand_evter_intr_en, - IFC_NAND_EVTER_INTR_OPCIR_EN | - IFC_NAND_EVTER_INTR_FTOERIR_EN | - IFC_NAND_EVTER_INTR_WPERIR_EN); - + iowrite32be(IFC_NAND_EVTER_INTR_OPCIR_EN | + IFC_NAND_EVTER_INTR_FTOERIR_EN | + IFC_NAND_EVTER_INTR_WPERIR_EN, + &ifc->ifc_nand.nand_evter_intr_en); priv->mtd.name = kasprintf(GFP_KERNEL, "%x.flash", (unsigned)res.start); if (!priv->mtd.name) { ret = -ENOMEM; diff --git a/drivers/mtd/nand/gpmi-nand/bch-regs.h b/drivers/mtd/nand/gpmi-nand/bch-regs.h index a0924515c39..588f5374047 100644 --- a/drivers/mtd/nand/gpmi-nand/bch-regs.h +++ b/drivers/mtd/nand/gpmi-nand/bch-regs.h @@ -61,6 +61,16 @@ & BM_BCH_FLASH0LAYOUT0_ECC0) \ ) +#define MX6Q_BP_BCH_FLASH0LAYOUT0_GF_13_14 10 +#define MX6Q_BM_BCH_FLASH0LAYOUT0_GF_13_14 \ + (0x1 << MX6Q_BP_BCH_FLASH0LAYOUT0_GF_13_14) +#define BF_BCH_FLASH0LAYOUT0_GF(v, x) \ + ((GPMI_IS_MX6Q(x) && ((v) == 14)) \ + ? (((1) << MX6Q_BP_BCH_FLASH0LAYOUT0_GF_13_14) \ + & MX6Q_BM_BCH_FLASH0LAYOUT0_GF_13_14) \ + : 0 \ + ) + #define BP_BCH_FLASH0LAYOUT0_DATA0_SIZE 0 #define BM_BCH_FLASH0LAYOUT0_DATA0_SIZE \ (0xfff << BP_BCH_FLASH0LAYOUT0_DATA0_SIZE) @@ -93,6 +103,16 @@ & BM_BCH_FLASH0LAYOUT1_ECCN) \ ) +#define MX6Q_BP_BCH_FLASH0LAYOUT1_GF_13_14 10 +#define MX6Q_BM_BCH_FLASH0LAYOUT1_GF_13_14 \ + (0x1 << MX6Q_BP_BCH_FLASH0LAYOUT1_GF_13_14) +#define BF_BCH_FLASH0LAYOUT1_GF(v, x) \ + ((GPMI_IS_MX6Q(x) && ((v) == 14)) \ + ? (((1) << MX6Q_BP_BCH_FLASH0LAYOUT1_GF_13_14) \ + & MX6Q_BM_BCH_FLASH0LAYOUT1_GF_13_14) \ + : 0 \ + ) + #define BP_BCH_FLASH0LAYOUT1_DATAN_SIZE 0 #define BM_BCH_FLASH0LAYOUT1_DATAN_SIZE \ (0xfff << BP_BCH_FLASH0LAYOUT1_DATAN_SIZE) @@ -103,4 +123,6 @@ ? (((v) >> 2) & MX6Q_BM_BCH_FLASH0LAYOUT1_DATAN_SIZE) \ : ((v) & BM_BCH_FLASH0LAYOUT1_DATAN_SIZE) \ ) + +#define HW_BCH_VERSION 0x00000160 #endif diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-lib.c b/drivers/mtd/nand/gpmi-nand/gpmi-lib.c index d84699c7968..4f8857fa48a 100644 --- a/drivers/mtd/nand/gpmi-nand/gpmi-lib.c +++ b/drivers/mtd/nand/gpmi-nand/gpmi-lib.c @@ -208,6 +208,11 @@ void gpmi_dump_info(struct gpmi_nand_data *this) } /* start to print out the BCH info */ + pr_err("Show BCH registers :\n"); + for (i = 0; i <= HW_BCH_VERSION / 0x10 + 1; i++) { + reg = readl(r->bch_regs + i * 0x10); + pr_err("offset 0x%.3x : 0x%.8x\n", i * 0x10, reg); + } pr_err("BCH Geometry :\n"); pr_err("GF length : %u\n", geo->gf_len); pr_err("ECC Strength : %u\n", geo->ecc_strength); @@ -232,6 +237,7 @@ int bch_set_geometry(struct gpmi_nand_data *this) unsigned int metadata_size; unsigned int ecc_strength; unsigned int page_size; + unsigned int gf_len; int ret; if (common_nfc_set_geometry(this)) @@ -242,6 +248,7 @@ int bch_set_geometry(struct gpmi_nand_data *this) metadata_size = bch_geo->metadata_size; ecc_strength = bch_geo->ecc_strength >> 1; page_size = bch_geo->page_size; + gf_len = bch_geo->gf_len; ret = gpmi_enable_clk(this); if (ret) @@ -263,11 +270,13 @@ int bch_set_geometry(struct gpmi_nand_data *this) writel(BF_BCH_FLASH0LAYOUT0_NBLOCKS(block_count) | BF_BCH_FLASH0LAYOUT0_META_SIZE(metadata_size) | BF_BCH_FLASH0LAYOUT0_ECC0(ecc_strength, this) + | BF_BCH_FLASH0LAYOUT0_GF(gf_len, this) | BF_BCH_FLASH0LAYOUT0_DATA0_SIZE(block_size, this), r->bch_regs + HW_BCH_FLASH0LAYOUT0); writel(BF_BCH_FLASH0LAYOUT1_PAGE_SIZE(page_size) | BF_BCH_FLASH0LAYOUT1_ECCN(ecc_strength, this) + | BF_BCH_FLASH0LAYOUT1_GF(gf_len, this) | BF_BCH_FLASH0LAYOUT1_DATAN_SIZE(block_size, this), r->bch_regs + HW_BCH_FLASH0LAYOUT1); diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c index e9b1c47e3cf..717881a3d1b 100644 --- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c +++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c @@ -94,6 +94,25 @@ static inline int get_ecc_strength(struct gpmi_nand_data *this) return round_down(ecc_strength, 2); } +static inline bool gpmi_check_ecc(struct gpmi_nand_data *this) +{ + struct bch_geometry *geo = &this->bch_geometry; + + /* Do the sanity check. */ + if (GPMI_IS_MX23(this) || GPMI_IS_MX28(this)) { + /* The mx23/mx28 only support the GF13. */ + if (geo->gf_len == 14) + return false; + + if (geo->ecc_strength > MXS_ECC_STRENGTH_MAX) + return false; + } else if (GPMI_IS_MX6Q(this)) { + if (geo->ecc_strength > MX6_ECC_STRENGTH_MAX) + return false; + } + return true; +} + int common_nfc_set_geometry(struct gpmi_nand_data *this) { struct bch_geometry *geo = &this->bch_geometry; @@ -112,17 +131,24 @@ int common_nfc_set_geometry(struct gpmi_nand_data *this) /* The default for the length of Galois Field. */ geo->gf_len = 13; - /* The default for chunk size. There is no oobsize greater then 512. */ + /* The default for chunk size. */ geo->ecc_chunk_size = 512; - while (geo->ecc_chunk_size < mtd->oobsize) + while (geo->ecc_chunk_size < mtd->oobsize) { geo->ecc_chunk_size *= 2; /* keep C >= O */ + geo->gf_len = 14; + } geo->ecc_chunk_count = mtd->writesize / geo->ecc_chunk_size; /* We use the same ECC strength for all chunks. */ geo->ecc_strength = get_ecc_strength(this); - if (!geo->ecc_strength) { - pr_err("wrong ECC strength.\n"); + if (!gpmi_check_ecc(this)) { + dev_err(this->dev, + "We can not support this nand chip." + " Its required ecc strength(%d) is beyond our" + " capability(%d).\n", geo->ecc_strength, + (GPMI_IS_MX6Q(this) ? MX6_ECC_STRENGTH_MAX + : MXS_ECC_STRENGTH_MAX)); return -EINVAL; } @@ -920,8 +946,7 @@ static int gpmi_ecc_read_page(struct mtd_info *mtd, struct nand_chip *chip, dma_addr_t auxiliary_phys; unsigned int i; unsigned char *status; - unsigned int failed; - unsigned int corrected; + unsigned int max_bitflips = 0; int ret; pr_debug("page number is : %d\n", page); @@ -945,35 +970,25 @@ static int gpmi_ecc_read_page(struct mtd_info *mtd, struct nand_chip *chip, payload_virt, payload_phys); if (ret) { pr_err("Error in ECC-based read: %d\n", ret); - goto exit_nfc; + return ret; } /* handle the block mark swapping */ block_mark_swapping(this, payload_virt, auxiliary_virt); /* Loop over status bytes, accumulating ECC status. */ - failed = 0; - corrected = 0; - status = auxiliary_virt + nfc_geo->auxiliary_status_offset; + status = auxiliary_virt + nfc_geo->auxiliary_status_offset; for (i = 0; i < nfc_geo->ecc_chunk_count; i++, status++) { if ((*status == STATUS_GOOD) || (*status == STATUS_ERASED)) continue; if (*status == STATUS_UNCORRECTABLE) { - failed++; + mtd->ecc_stats.failed++; continue; } - corrected += *status; - } - - /* - * Propagate ECC status to the owning MTD only when failed or - * corrected times nearly reaches our ECC correction threshold. - */ - if (failed || corrected >= (nfc_geo->ecc_strength - 1)) { - mtd->ecc_stats.failed += failed; - mtd->ecc_stats.corrected += corrected; + mtd->ecc_stats.corrected += *status; + max_bitflips = max_t(unsigned int, max_bitflips, *status); } if (oob_required) { @@ -995,8 +1010,8 @@ static int gpmi_ecc_read_page(struct mtd_info *mtd, struct nand_chip *chip, this->payload_virt, this->payload_phys, nfc_geo->payload_size, payload_virt, payload_phys); -exit_nfc: - return ret; + + return max_bitflips; } static int gpmi_ecc_write_page(struct mtd_info *mtd, struct nand_chip *chip, @@ -1668,8 +1683,8 @@ exit_nfc_init: release_resources(this); exit_acquire_resources: platform_set_drvdata(pdev, NULL); - kfree(this); dev_err(this->dev, "driver registration failed: %d\n", ret); + kfree(this); return ret; } diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.h b/drivers/mtd/nand/gpmi-nand/gpmi-nand.h index 3d93a5e3909..07294773127 100644 --- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.h +++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.h @@ -284,6 +284,10 @@ extern int gpmi_read_page(struct gpmi_nand_data *, #define STATUS_ERASED 0xff #define STATUS_UNCORRECTABLE 0xfe +/* BCH's bit correction capability. */ +#define MXS_ECC_STRENGTH_MAX 20 /* mx23 and mx28 */ +#define MX6_ECC_STRENGTH_MAX 40 + /* Use the platform_id to distinguish different Archs. */ #define IS_MX23 0x0 #define IS_MX28 0x1 diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c index 60ac5b98b71..07e5784e5cd 100644 --- a/drivers/mtd/nand/mxc_nand.c +++ b/drivers/mtd/nand/mxc_nand.c @@ -530,12 +530,23 @@ static void send_page_v1(struct mtd_info *mtd, unsigned int ops) static void send_read_id_v3(struct mxc_nand_host *host) { + struct nand_chip *this = &host->nand; + /* Read ID into main buffer */ writel(NFC_ID, NFC_V3_LAUNCH); wait_op_done(host, true); memcpy32_fromio(host->data_buf, host->main_area0, 16); + + if (this->options & NAND_BUSWIDTH_16) { + /* compress the ID info */ + host->data_buf[1] = host->data_buf[2]; + host->data_buf[2] = host->data_buf[4]; + host->data_buf[3] = host->data_buf[6]; + host->data_buf[4] = host->data_buf[8]; + host->data_buf[5] = host->data_buf[10]; + } } /* Request the NANDFC to perform a read of the NAND device ID. */ diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c index 3766682a028..43214151b88 100644 --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c @@ -825,13 +825,8 @@ static void panic_nand_wait(struct mtd_info *mtd, struct nand_chip *chip, static int nand_wait(struct mtd_info *mtd, struct nand_chip *chip) { - unsigned long timeo = jiffies; int status, state = chip->state; - - if (state == FL_ERASING) - timeo += (HZ * 400) / 1000; - else - timeo += (HZ * 20) / 1000; + unsigned long timeo = (state == FL_ERASING ? 400 : 20); led_trigger_event(nand_led_trigger, LED_FULL); @@ -849,6 +844,7 @@ static int nand_wait(struct mtd_info *mtd, struct nand_chip *chip) if (in_interrupt() || oops_in_progress) panic_nand_wait(mtd, chip, timeo); else { + timeo = jiffies + msecs_to_jiffies(timeo); while (time_before(jiffies, timeo)) { if (chip->dev_ready) { if (chip->dev_ready(mtd)) diff --git a/drivers/mtd/nand/nand_ecc.c b/drivers/mtd/nand/nand_ecc.c index b7cfe0d3712..053c9a2d47c 100644 --- a/drivers/mtd/nand/nand_ecc.c +++ b/drivers/mtd/nand/nand_ecc.c @@ -55,8 +55,7 @@ struct mtd_info; #define MODULE_AUTHOR(x) /* x */ #define MODULE_DESCRIPTION(x) /* x */ -#define printk printf -#define KERN_ERR "" +#define pr_err printf #endif /* @@ -507,7 +506,7 @@ int __nand_correct_data(unsigned char *buf, if ((bitsperbyte[b0] + bitsperbyte[b1] + bitsperbyte[b2]) == 1) return 1; /* error in ECC data; no action needed */ - printk(KERN_ERR "uncorrectable error : "); + pr_err("%s: uncorrectable ECC error", __func__); return -1; } EXPORT_SYMBOL(__nand_correct_data); diff --git a/drivers/mtd/nand/nandsim.c b/drivers/mtd/nand/nandsim.c index 8f30d385bfa..891c52a30e6 100644 --- a/drivers/mtd/nand/nandsim.c +++ b/drivers/mtd/nand/nandsim.c @@ -1468,12 +1468,12 @@ int do_read_error(struct nandsim *ns, int num) void do_bit_flips(struct nandsim *ns, int num) { - if (bitflips && random32() < (1 << 22)) { + if (bitflips && prandom_u32() < (1 << 22)) { int flips = 1; if (bitflips > 1) - flips = (random32() % (int) bitflips) + 1; + flips = (prandom_u32() % (int) bitflips) + 1; while (flips--) { - int pos = random32() % (num * 8); + int pos = prandom_u32() % (num * 8); ns->buf.byte[pos / 8] ^= (1 << (pos % 8)); NS_WARN("read_page: flipping bit %d in page %d " "reading from %d ecc: corrected=%u failed=%u\n", diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c index 1d333497cfc..8e820ddf4e0 100644 --- a/drivers/mtd/nand/omap2.c +++ b/drivers/mtd/nand/omap2.c @@ -22,9 +22,12 @@ #include <linux/omap-dma.h> #include <linux/io.h> #include <linux/slab.h> +#include <linux/of.h> +#include <linux/of_device.h> #ifdef CONFIG_MTD_NAND_OMAP_BCH #include <linux/bch.h> +#include <linux/platform_data/elm.h> #endif #include <linux/platform_data/mtd-nand-omap2.h> @@ -117,6 +120,33 @@ #define OMAP24XX_DMA_GPMC 4 +#define BCH8_MAX_ERROR 8 /* upto 8 bit correctable */ +#define BCH4_MAX_ERROR 4 /* upto 4 bit correctable */ + +#define SECTOR_BYTES 512 +/* 4 bit padding to make byte aligned, 56 = 52 + 4 */ +#define BCH4_BIT_PAD 4 +#define BCH8_ECC_MAX ((SECTOR_BYTES + BCH8_ECC_OOB_BYTES) * 8) +#define BCH4_ECC_MAX ((SECTOR_BYTES + BCH4_ECC_OOB_BYTES) * 8) + +/* GPMC ecc engine settings for read */ +#define BCH_WRAPMODE_1 1 /* BCH wrap mode 1 */ +#define BCH8R_ECC_SIZE0 0x1a /* ecc_size0 = 26 */ +#define BCH8R_ECC_SIZE1 0x2 /* ecc_size1 = 2 */ +#define BCH4R_ECC_SIZE0 0xd /* ecc_size0 = 13 */ +#define BCH4R_ECC_SIZE1 0x3 /* ecc_size1 = 3 */ + +/* GPMC ecc engine settings for write */ +#define BCH_WRAPMODE_6 6 /* BCH wrap mode 6 */ +#define BCH_ECC_SIZE0 0x0 /* ecc_size0 = 0, no oob protection */ +#define BCH_ECC_SIZE1 0x20 /* ecc_size1 = 32 */ + +#ifdef CONFIG_MTD_NAND_OMAP_BCH +static u_char bch8_vector[] = {0xf3, 0xdb, 0x14, 0x16, 0x8b, 0xd2, 0xbe, 0xcc, + 0xac, 0x6b, 0xff, 0x99, 0x7b}; +static u_char bch4_vector[] = {0x00, 0x6b, 0x31, 0xdd, 0x41, 0xbc, 0x10}; +#endif + /* oob info generated runtime depending on ecc algorithm and layout selected */ static struct nand_ecclayout omap_oobinfo; /* Define some generic bad / good block scan pattern which are used @@ -156,6 +186,9 @@ struct omap_nand_info { #ifdef CONFIG_MTD_NAND_OMAP_BCH struct bch_control *bch; struct nand_ecclayout ecclayout; + bool is_elm_used; + struct device *elm_dev; + struct device_node *of_node; #endif }; @@ -1031,6 +1064,13 @@ static int omap_dev_ready(struct mtd_info *mtd) * omap3_enable_hwecc_bch - Program OMAP3 GPMC to perform BCH ECC correction * @mtd: MTD device structure * @mode: Read/Write mode + * + * When using BCH, sector size is hardcoded to 512 bytes. + * Using wrapping mode 6 both for reading and writing if ELM module not uses + * for error correction. + * On writing, + * eccsize0 = 0 (no additional protected byte in spare area) + * eccsize1 = 32 (skip 32 nibbles = 16 bytes per sector in spare area) */ static void omap3_enable_hwecc_bch(struct mtd_info *mtd, int mode) { @@ -1039,32 +1079,57 @@ static void omap3_enable_hwecc_bch(struct mtd_info *mtd, int mode) struct omap_nand_info *info = container_of(mtd, struct omap_nand_info, mtd); struct nand_chip *chip = mtd->priv; - u32 val; + u32 val, wr_mode; + unsigned int ecc_size1, ecc_size0; + + /* Using wrapping mode 6 for writing */ + wr_mode = BCH_WRAPMODE_6; - nerrors = (info->nand.ecc.bytes == 13) ? 8 : 4; - dev_width = (chip->options & NAND_BUSWIDTH_16) ? 1 : 0; - nsectors = 1; /* - * Program GPMC to perform correction on one 512-byte sector at a time. - * Using 4 sectors at a time (i.e. ecc.size = 2048) is also possible and - * gives a slight (5%) performance gain (but requires additional code). + * ECC engine enabled for valid ecc_size0 nibbles + * and disabled for ecc_size1 nibbles. */ + ecc_size0 = BCH_ECC_SIZE0; + ecc_size1 = BCH_ECC_SIZE1; + + /* Perform ecc calculation on 512-byte sector */ + nsectors = 1; + + /* Update number of error correction */ + nerrors = info->nand.ecc.strength; + + /* Multi sector reading/writing for NAND flash with page size < 4096 */ + if (info->is_elm_used && (mtd->writesize <= 4096)) { + if (mode == NAND_ECC_READ) { + /* Using wrapping mode 1 for reading */ + wr_mode = BCH_WRAPMODE_1; + + /* + * ECC engine enabled for ecc_size0 nibbles + * and disabled for ecc_size1 nibbles. + */ + ecc_size0 = (nerrors == 8) ? + BCH8R_ECC_SIZE0 : BCH4R_ECC_SIZE0; + ecc_size1 = (nerrors == 8) ? + BCH8R_ECC_SIZE1 : BCH4R_ECC_SIZE1; + } + + /* Perform ecc calculation for one page (< 4096) */ + nsectors = info->nand.ecc.steps; + } writel(ECC1, info->reg.gpmc_ecc_control); - /* - * When using BCH, sector size is hardcoded to 512 bytes. - * Here we are using wrapping mode 6 both for reading and writing, with: - * size0 = 0 (no additional protected byte in spare area) - * size1 = 32 (skip 32 nibbles = 16 bytes per sector in spare area) - */ - val = (32 << ECCSIZE1_SHIFT) | (0 << ECCSIZE0_SHIFT); + /* Configure ecc size for BCH */ + val = (ecc_size1 << ECCSIZE1_SHIFT) | (ecc_size0 << ECCSIZE0_SHIFT); writel(val, info->reg.gpmc_ecc_size_config); + dev_width = (chip->options & NAND_BUSWIDTH_16) ? 1 : 0; + /* BCH configuration */ val = ((1 << 16) | /* enable BCH */ (((nerrors == 8) ? 1 : 0) << 12) | /* 8 or 4 bits */ - (0x06 << 8) | /* wrap mode = 6 */ + (wr_mode << 8) | /* wrap mode */ (dev_width << 7) | /* bus width */ (((nsectors-1) & 0x7) << 4) | /* number of sectors */ (info->gpmc_cs << 1) | /* ECC CS */ @@ -1072,7 +1137,7 @@ static void omap3_enable_hwecc_bch(struct mtd_info *mtd, int mode) writel(val, info->reg.gpmc_ecc_config); - /* clear ecc and enable bits */ + /* Clear ecc and enable bits */ writel(ECCCLEAR | ECC1, info->reg.gpmc_ecc_control); } @@ -1162,6 +1227,298 @@ static int omap3_calculate_ecc_bch8(struct mtd_info *mtd, const u_char *dat, } /** + * omap3_calculate_ecc_bch - Generate bytes of ECC bytes + * @mtd: MTD device structure + * @dat: The pointer to data on which ecc is computed + * @ecc_code: The ecc_code buffer + * + * Support calculating of BCH4/8 ecc vectors for the page + */ +static int omap3_calculate_ecc_bch(struct mtd_info *mtd, const u_char *dat, + u_char *ecc_code) +{ + struct omap_nand_info *info = container_of(mtd, struct omap_nand_info, + mtd); + unsigned long nsectors, bch_val1, bch_val2, bch_val3, bch_val4; + int i, eccbchtsel; + + nsectors = ((readl(info->reg.gpmc_ecc_config) >> 4) & 0x7) + 1; + /* + * find BCH scheme used + * 0 -> BCH4 + * 1 -> BCH8 + */ + eccbchtsel = ((readl(info->reg.gpmc_ecc_config) >> 12) & 0x3); + + for (i = 0; i < nsectors; i++) { + + /* Read hw-computed remainder */ + bch_val1 = readl(info->reg.gpmc_bch_result0[i]); + bch_val2 = readl(info->reg.gpmc_bch_result1[i]); + if (eccbchtsel) { + bch_val3 = readl(info->reg.gpmc_bch_result2[i]); + bch_val4 = readl(info->reg.gpmc_bch_result3[i]); + } + + if (eccbchtsel) { + /* BCH8 ecc scheme */ + *ecc_code++ = (bch_val4 & 0xFF); + *ecc_code++ = ((bch_val3 >> 24) & 0xFF); + *ecc_code++ = ((bch_val3 >> 16) & 0xFF); + *ecc_code++ = ((bch_val3 >> 8) & 0xFF); + *ecc_code++ = (bch_val3 & 0xFF); + *ecc_code++ = ((bch_val2 >> 24) & 0xFF); + *ecc_code++ = ((bch_val2 >> 16) & 0xFF); + *ecc_code++ = ((bch_val2 >> 8) & 0xFF); + *ecc_code++ = (bch_val2 & 0xFF); + *ecc_code++ = ((bch_val1 >> 24) & 0xFF); + *ecc_code++ = ((bch_val1 >> 16) & 0xFF); + *ecc_code++ = ((bch_val1 >> 8) & 0xFF); + *ecc_code++ = (bch_val1 & 0xFF); + /* + * Setting 14th byte to zero to handle + * erased page & maintain compatibility + * with RBL + */ + *ecc_code++ = 0x0; + } else { + /* BCH4 ecc scheme */ + *ecc_code++ = ((bch_val2 >> 12) & 0xFF); + *ecc_code++ = ((bch_val2 >> 4) & 0xFF); + *ecc_code++ = ((bch_val2 & 0xF) << 4) | + ((bch_val1 >> 28) & 0xF); + *ecc_code++ = ((bch_val1 >> 20) & 0xFF); + *ecc_code++ = ((bch_val1 >> 12) & 0xFF); + *ecc_code++ = ((bch_val1 >> 4) & 0xFF); + *ecc_code++ = ((bch_val1 & 0xF) << 4); + /* + * Setting 8th byte to zero to handle + * erased page + */ + *ecc_code++ = 0x0; + } + } + + return 0; +} + +/** + * erased_sector_bitflips - count bit flips + * @data: data sector buffer + * @oob: oob buffer + * @info: omap_nand_info + * + * Check the bit flips in erased page falls below correctable level. + * If falls below, report the page as erased with correctable bit + * flip, else report as uncorrectable page. + */ +static int erased_sector_bitflips(u_char *data, u_char *oob, + struct omap_nand_info *info) +{ + int flip_bits = 0, i; + + for (i = 0; i < info->nand.ecc.size; i++) { + flip_bits += hweight8(~data[i]); + if (flip_bits > info->nand.ecc.strength) + return 0; + } + + for (i = 0; i < info->nand.ecc.bytes - 1; i++) { + flip_bits += hweight8(~oob[i]); + if (flip_bits > info->nand.ecc.strength) + return 0; + } + + /* + * Bit flips falls in correctable level. + * Fill data area with 0xFF + */ + if (flip_bits) { + memset(data, 0xFF, info->nand.ecc.size); + memset(oob, 0xFF, info->nand.ecc.bytes); + } + + return flip_bits; +} + +/** + * omap_elm_correct_data - corrects page data area in case error reported + * @mtd: MTD device structure + * @data: page data + * @read_ecc: ecc read from nand flash + * @calc_ecc: ecc read from HW ECC registers + * + * Calculated ecc vector reported as zero in case of non-error pages. + * In case of error/erased pages non-zero error vector is reported. + * In case of non-zero ecc vector, check read_ecc at fixed offset + * (x = 13/7 in case of BCH8/4 == 0) to find page programmed or not. + * To handle bit flips in this data, count the number of 0's in + * read_ecc[x] and check if it greater than 4. If it is less, it is + * programmed page, else erased page. + * + * 1. If page is erased, check with standard ecc vector (ecc vector + * for erased page to find any bit flip). If check fails, bit flip + * is present in erased page. Count the bit flips in erased page and + * if it falls under correctable level, report page with 0xFF and + * update the correctable bit information. + * 2. If error is reported on programmed page, update elm error + * vector and correct the page with ELM error correction routine. + * + */ +static int omap_elm_correct_data(struct mtd_info *mtd, u_char *data, + u_char *read_ecc, u_char *calc_ecc) +{ + struct omap_nand_info *info = container_of(mtd, struct omap_nand_info, + mtd); + int eccsteps = info->nand.ecc.steps; + int i , j, stat = 0; + int eccsize, eccflag, ecc_vector_size; + struct elm_errorvec err_vec[ERROR_VECTOR_MAX]; + u_char *ecc_vec = calc_ecc; + u_char *spare_ecc = read_ecc; + u_char *erased_ecc_vec; + enum bch_ecc type; + bool is_error_reported = false; + + /* Initialize elm error vector to zero */ + memset(err_vec, 0, sizeof(err_vec)); + + if (info->nand.ecc.strength == BCH8_MAX_ERROR) { + type = BCH8_ECC; + erased_ecc_vec = bch8_vector; + } else { + type = BCH4_ECC; + erased_ecc_vec = bch4_vector; + } + + ecc_vector_size = info->nand.ecc.bytes; + + /* + * Remove extra byte padding for BCH8 RBL + * compatibility and erased page handling + */ + eccsize = ecc_vector_size - 1; + + for (i = 0; i < eccsteps ; i++) { + eccflag = 0; /* initialize eccflag */ + + /* + * Check any error reported, + * In case of error, non zero ecc reported. + */ + + for (j = 0; (j < eccsize); j++) { + if (calc_ecc[j] != 0) { + eccflag = 1; /* non zero ecc, error present */ + break; + } + } + + if (eccflag == 1) { + /* + * Set threshold to minimum of 4, half of ecc.strength/2 + * to allow max bit flip in byte to 4 + */ + unsigned int threshold = min_t(unsigned int, 4, + info->nand.ecc.strength / 2); + + /* + * Check data area is programmed by counting + * number of 0's at fixed offset in spare area. + * Checking count of 0's against threshold. + * In case programmed page expects at least threshold + * zeros in byte. + * If zeros are less than threshold for programmed page/ + * zeros are more than threshold erased page, either + * case page reported as uncorrectable. + */ + if (hweight8(~read_ecc[eccsize]) >= threshold) { + /* + * Update elm error vector as + * data area is programmed + */ + err_vec[i].error_reported = true; + is_error_reported = true; + } else { + /* Error reported in erased page */ + int bitflip_count; + u_char *buf = &data[info->nand.ecc.size * i]; + + if (memcmp(calc_ecc, erased_ecc_vec, eccsize)) { + bitflip_count = erased_sector_bitflips( + buf, read_ecc, info); + + if (bitflip_count) + stat += bitflip_count; + else + return -EINVAL; + } + } + } + + /* Update the ecc vector */ + calc_ecc += ecc_vector_size; + read_ecc += ecc_vector_size; + } + + /* Check if any error reported */ + if (!is_error_reported) + return 0; + + /* Decode BCH error using ELM module */ + elm_decode_bch_error_page(info->elm_dev, ecc_vec, err_vec); + + for (i = 0; i < eccsteps; i++) { + if (err_vec[i].error_reported) { + for (j = 0; j < err_vec[i].error_count; j++) { + u32 bit_pos, byte_pos, error_max, pos; + + if (type == BCH8_ECC) + error_max = BCH8_ECC_MAX; + else + error_max = BCH4_ECC_MAX; + + if (info->nand.ecc.strength == BCH8_MAX_ERROR) + pos = err_vec[i].error_loc[j]; + else + /* Add 4 to take care 4 bit padding */ + pos = err_vec[i].error_loc[j] + + BCH4_BIT_PAD; + + /* Calculate bit position of error */ + bit_pos = pos % 8; + + /* Calculate byte position of error */ + byte_pos = (error_max - pos - 1) / 8; + + if (pos < error_max) { + if (byte_pos < 512) + data[byte_pos] ^= 1 << bit_pos; + else + spare_ecc[byte_pos - 512] ^= + 1 << bit_pos; + } + /* else, not interested to correct ecc */ + } + } + + /* Update number of correctable errors */ + stat += err_vec[i].error_count; + + /* Update page data with sector size */ + data += info->nand.ecc.size; + spare_ecc += ecc_vector_size; + } + + for (i = 0; i < eccsteps; i++) + /* Return error if uncorrectable error present */ + if (err_vec[i].error_uncorrectable) + return -EINVAL; + + return stat; +} + +/** * omap3_correct_data_bch - Decode received data and correct errors * @mtd: MTD device structure * @data: page data @@ -1194,6 +1551,92 @@ static int omap3_correct_data_bch(struct mtd_info *mtd, u_char *data, } /** + * omap_write_page_bch - BCH ecc based write page function for entire page + * @mtd: mtd info structure + * @chip: nand chip info structure + * @buf: data buffer + * @oob_required: must write chip->oob_poi to OOB + * + * Custom write page method evolved to support multi sector writing in one shot + */ +static int omap_write_page_bch(struct mtd_info *mtd, struct nand_chip *chip, + const uint8_t *buf, int oob_required) +{ + int i; + uint8_t *ecc_calc = chip->buffers->ecccalc; + uint32_t *eccpos = chip->ecc.layout->eccpos; + + /* Enable GPMC ecc engine */ + chip->ecc.hwctl(mtd, NAND_ECC_WRITE); + + /* Write data */ + chip->write_buf(mtd, buf, mtd->writesize); + + /* Update ecc vector from GPMC result registers */ + chip->ecc.calculate(mtd, buf, &ecc_calc[0]); + + for (i = 0; i < chip->ecc.total; i++) + chip->oob_poi[eccpos[i]] = ecc_calc[i]; + + /* Write ecc vector to OOB area */ + chip->write_buf(mtd, chip->oob_poi, mtd->oobsize); + return 0; +} + +/** + * omap_read_page_bch - BCH ecc based page read function for entire page + * @mtd: mtd info structure + * @chip: nand chip info structure + * @buf: buffer to store read data + * @oob_required: caller requires OOB data read to chip->oob_poi + * @page: page number to read + * + * For BCH ecc scheme, GPMC used for syndrome calculation and ELM module + * used for error correction. + * Custom method evolved to support ELM error correction & multi sector + * reading. On reading page data area is read along with OOB data with + * ecc engine enabled. ecc vector updated after read of OOB data. + * For non error pages ecc vector reported as zero. + */ +static int omap_read_page_bch(struct mtd_info *mtd, struct nand_chip *chip, + uint8_t *buf, int oob_required, int page) +{ + uint8_t *ecc_calc = chip->buffers->ecccalc; + uint8_t *ecc_code = chip->buffers->ecccode; + uint32_t *eccpos = chip->ecc.layout->eccpos; + uint8_t *oob = &chip->oob_poi[eccpos[0]]; + uint32_t oob_pos = mtd->writesize + chip->ecc.layout->eccpos[0]; + int stat; + unsigned int max_bitflips = 0; + + /* Enable GPMC ecc engine */ + chip->ecc.hwctl(mtd, NAND_ECC_READ); + + /* Read data */ + chip->read_buf(mtd, buf, mtd->writesize); + + /* Read oob bytes */ + chip->cmdfunc(mtd, NAND_CMD_RNDOUT, oob_pos, -1); + chip->read_buf(mtd, oob, chip->ecc.total); + + /* Calculate ecc bytes */ + chip->ecc.calculate(mtd, buf, ecc_calc); + + memcpy(ecc_code, &chip->oob_poi[eccpos[0]], chip->ecc.total); + + stat = chip->ecc.correct(mtd, buf, ecc_code, ecc_calc); + + if (stat < 0) { + mtd->ecc_stats.failed++; + } else { + mtd->ecc_stats.corrected += stat; + max_bitflips = max_t(unsigned int, max_bitflips, stat); + } + + return max_bitflips; +} + +/** * omap3_free_bch - Release BCH ecc resources * @mtd: MTD device structure */ @@ -1218,43 +1661,86 @@ static int omap3_init_bch(struct mtd_info *mtd, int ecc_opt) struct omap_nand_info *info = container_of(mtd, struct omap_nand_info, mtd); #ifdef CONFIG_MTD_NAND_OMAP_BCH8 - const int hw_errors = 8; + const int hw_errors = BCH8_MAX_ERROR; #else - const int hw_errors = 4; + const int hw_errors = BCH4_MAX_ERROR; #endif + enum bch_ecc bch_type; + const __be32 *parp; + int lenp; + struct device_node *elm_node; + info->bch = NULL; - max_errors = (ecc_opt == OMAP_ECC_BCH8_CODE_HW) ? 8 : 4; + max_errors = (ecc_opt == OMAP_ECC_BCH8_CODE_HW) ? + BCH8_MAX_ERROR : BCH4_MAX_ERROR; if (max_errors != hw_errors) { pr_err("cannot configure %d-bit BCH ecc, only %d-bit supported", max_errors, hw_errors); goto fail; } - /* software bch library is only used to detect and locate errors */ - info->bch = init_bch(13, max_errors, 0x201b /* hw polynomial */); - if (!info->bch) - goto fail; + info->nand.ecc.size = 512; + info->nand.ecc.hwctl = omap3_enable_hwecc_bch; + info->nand.ecc.mode = NAND_ECC_HW; + info->nand.ecc.strength = max_errors; - info->nand.ecc.size = 512; - info->nand.ecc.hwctl = omap3_enable_hwecc_bch; - info->nand.ecc.correct = omap3_correct_data_bch; - info->nand.ecc.mode = NAND_ECC_HW; + if (hw_errors == BCH8_MAX_ERROR) + bch_type = BCH8_ECC; + else + bch_type = BCH4_ECC; - /* - * The number of corrected errors in an ecc block that will trigger - * block scrubbing defaults to the ecc strength (4 or 8). - * Set mtd->bitflip_threshold here to define a custom threshold. - */ + /* Detect availability of ELM module */ + parp = of_get_property(info->of_node, "elm_id", &lenp); + if ((parp == NULL) && (lenp != (sizeof(void *) * 2))) { + pr_err("Missing elm_id property, fall back to Software BCH\n"); + info->is_elm_used = false; + } else { + struct platform_device *pdev; - if (max_errors == 8) { - info->nand.ecc.strength = 8; - info->nand.ecc.bytes = 13; - info->nand.ecc.calculate = omap3_calculate_ecc_bch8; + elm_node = of_find_node_by_phandle(be32_to_cpup(parp)); + pdev = of_find_device_by_node(elm_node); + info->elm_dev = &pdev->dev; + elm_config(info->elm_dev, bch_type); + info->is_elm_used = true; + } + + if (info->is_elm_used && (mtd->writesize <= 4096)) { + + if (hw_errors == BCH8_MAX_ERROR) + info->nand.ecc.bytes = BCH8_SIZE; + else + info->nand.ecc.bytes = BCH4_SIZE; + + info->nand.ecc.correct = omap_elm_correct_data; + info->nand.ecc.calculate = omap3_calculate_ecc_bch; + info->nand.ecc.read_page = omap_read_page_bch; + info->nand.ecc.write_page = omap_write_page_bch; } else { - info->nand.ecc.strength = 4; - info->nand.ecc.bytes = 7; - info->nand.ecc.calculate = omap3_calculate_ecc_bch4; + /* + * software bch library is only used to detect and + * locate errors + */ + info->bch = init_bch(13, max_errors, + 0x201b /* hw polynomial */); + if (!info->bch) + goto fail; + + info->nand.ecc.correct = omap3_correct_data_bch; + + /* + * The number of corrected errors in an ecc block that will + * trigger block scrubbing defaults to the ecc strength (4 or 8) + * Set mtd->bitflip_threshold here to define a custom threshold. + */ + + if (max_errors == 8) { + info->nand.ecc.bytes = 13; + info->nand.ecc.calculate = omap3_calculate_ecc_bch8; + } else { + info->nand.ecc.bytes = 7; + info->nand.ecc.calculate = omap3_calculate_ecc_bch4; + } } pr_info("enabling NAND BCH ecc with %d-bit correction\n", max_errors); @@ -1270,7 +1756,7 @@ fail: */ static int omap3_init_bch_tail(struct mtd_info *mtd) { - int i, steps; + int i, steps, offset; struct omap_nand_info *info = container_of(mtd, struct omap_nand_info, mtd); struct nand_ecclayout *layout = &info->ecclayout; @@ -1292,11 +1778,21 @@ static int omap3_init_bch_tail(struct mtd_info *mtd) goto fail; } + /* ECC layout compatible with RBL for BCH8 */ + if (info->is_elm_used && (info->nand.ecc.bytes == BCH8_SIZE)) + offset = 2; + else + offset = mtd->oobsize - layout->eccbytes; + /* put ecc bytes at oob tail */ for (i = 0; i < layout->eccbytes; i++) - layout->eccpos[i] = mtd->oobsize-layout->eccbytes+i; + layout->eccpos[i] = offset + i; + + if (info->is_elm_used && (info->nand.ecc.bytes == BCH8_SIZE)) + layout->oobfree[0].offset = 2 + layout->eccbytes * steps; + else + layout->oobfree[0].offset = 2; - layout->oobfree[0].offset = 2; layout->oobfree[0].length = mtd->oobsize-2-layout->eccbytes; info->nand.ecc.layout = layout; @@ -1360,6 +1856,9 @@ static int omap_nand_probe(struct platform_device *pdev) info->nand.options = pdata->devsize; info->nand.options |= NAND_SKIP_BBTSCAN; +#ifdef CONFIG_MTD_NAND_OMAP_BCH + info->of_node = pdata->of_node; +#endif res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (res == NULL) { diff --git a/drivers/mtd/ofpart.c b/drivers/mtd/ofpart.c index dbd3aa574ea..30bd907a260 100644 --- a/drivers/mtd/ofpart.c +++ b/drivers/mtd/ofpart.c @@ -174,7 +174,14 @@ out: return rc; } +static void __exit ofpart_parser_exit(void) +{ + deregister_mtd_parser(&ofpart_parser); + deregister_mtd_parser(&ofoldpart_parser); +} + module_init(ofpart_parser_init); +module_exit(ofpart_parser_exit); MODULE_LICENSE("GPL"); MODULE_DESCRIPTION("Parser for MTD partitioning information in device tree"); diff --git a/drivers/mtd/tests/mtd_nandecctest.c b/drivers/mtd/tests/mtd_nandecctest.c index db2f22e7966..70106607c24 100644 --- a/drivers/mtd/tests/mtd_nandecctest.c +++ b/drivers/mtd/tests/mtd_nandecctest.c @@ -44,7 +44,7 @@ struct nand_ecc_test { static void single_bit_error_data(void *error_data, void *correct_data, size_t size) { - unsigned int offset = random32() % (size * BITS_PER_BYTE); + unsigned int offset = prandom_u32() % (size * BITS_PER_BYTE); memcpy(error_data, correct_data, size); __change_bit_le(offset, error_data); @@ -55,9 +55,9 @@ static void double_bit_error_data(void *error_data, void *correct_data, { unsigned int offset[2]; - offset[0] = random32() % (size * BITS_PER_BYTE); + offset[0] = prandom_u32() % (size * BITS_PER_BYTE); do { - offset[1] = random32() % (size * BITS_PER_BYTE); + offset[1] = prandom_u32() % (size * BITS_PER_BYTE); } while (offset[0] == offset[1]); memcpy(error_data, correct_data, size); @@ -68,7 +68,7 @@ static void double_bit_error_data(void *error_data, void *correct_data, static unsigned int random_ecc_bit(size_t size) { - unsigned int offset = random32() % (3 * BITS_PER_BYTE); + unsigned int offset = prandom_u32() % (3 * BITS_PER_BYTE); if (size == 256) { /* @@ -76,7 +76,7 @@ static unsigned int random_ecc_bit(size_t size) * and 17th bit) in ECC code for 256 byte data block */ while (offset == 16 || offset == 17) - offset = random32() % (3 * BITS_PER_BYTE); + offset = prandom_u32() % (3 * BITS_PER_BYTE); } return offset; diff --git a/drivers/mtd/tests/mtd_stresstest.c b/drivers/mtd/tests/mtd_stresstest.c index 2d7e6cffd6d..787f539d16c 100644 --- a/drivers/mtd/tests/mtd_stresstest.c +++ b/drivers/mtd/tests/mtd_stresstest.c @@ -55,7 +55,7 @@ static int rand_eb(void) unsigned int eb; again: - eb = random32(); + eb = prandom_u32(); /* Read or write up 2 eraseblocks at a time - hence 'ebcnt - 1' */ eb %= (ebcnt - 1); if (bbt[eb]) @@ -67,7 +67,7 @@ static int rand_offs(void) { unsigned int offs; - offs = random32(); + offs = prandom_u32(); offs %= bufsize; return offs; } @@ -76,7 +76,7 @@ static int rand_len(int offs) { unsigned int len; - len = random32(); + len = prandom_u32(); len %= (bufsize - offs); return len; } @@ -191,7 +191,7 @@ static int do_write(void) static int do_operation(void) { - if (random32() & 1) + if (prandom_u32() & 1) return do_read(); else return do_write(); diff --git a/drivers/mtd/tests/mtd_torturetest.c b/drivers/mtd/tests/mtd_torturetest.c index c4cde1e9edd..3a9f6a6a79f 100644 --- a/drivers/mtd/tests/mtd_torturetest.c +++ b/drivers/mtd/tests/mtd_torturetest.c @@ -208,7 +208,7 @@ static inline int write_pattern(int ebnum, void *buf) static int __init tort_init(void) { int err = 0, i, infinite = !cycles_count; - int bad_ebs[ebcnt]; + int *bad_ebs; printk(KERN_INFO "\n"); printk(KERN_INFO "=================================================\n"); @@ -250,28 +250,24 @@ static int __init tort_init(void) err = -ENOMEM; patt_5A5 = kmalloc(mtd->erasesize, GFP_KERNEL); - if (!patt_5A5) { - pr_err("error: cannot allocate memory\n"); + if (!patt_5A5) goto out_mtd; - } patt_A5A = kmalloc(mtd->erasesize, GFP_KERNEL); - if (!patt_A5A) { - pr_err("error: cannot allocate memory\n"); + if (!patt_A5A) goto out_patt_5A5; - } patt_FF = kmalloc(mtd->erasesize, GFP_KERNEL); - if (!patt_FF) { - pr_err("error: cannot allocate memory\n"); + if (!patt_FF) goto out_patt_A5A; - } check_buf = kmalloc(mtd->erasesize, GFP_KERNEL); - if (!check_buf) { - pr_err("error: cannot allocate memory\n"); + if (!check_buf) goto out_patt_FF; - } + + bad_ebs = kcalloc(ebcnt, sizeof(*bad_ebs), GFP_KERNEL); + if (!bad_ebs) + goto out_check_buf; err = 0; @@ -290,7 +286,6 @@ static int __init tort_init(void) /* * Check if there is a bad eraseblock among those we are going to test. */ - memset(&bad_ebs[0], 0, sizeof(int) * ebcnt); if (mtd_can_have_bb(mtd)) { for (i = eb; i < eb + ebcnt; i++) { err = mtd_block_isbad(mtd, (loff_t)i * mtd->erasesize); @@ -394,6 +389,8 @@ out: pr_info("finished after %u erase cycles\n", erase_cycles); + kfree(bad_ebs); +out_check_buf: kfree(check_buf); out_patt_FF: kfree(patt_FF); diff --git a/drivers/mtd/ubi/debug.h b/drivers/mtd/ubi/debug.h index 33f8f3b2c9b..cba89fcd158 100644 --- a/drivers/mtd/ubi/debug.h +++ b/drivers/mtd/ubi/debug.h @@ -86,7 +86,7 @@ static inline int ubi_dbg_is_bgt_disabled(const struct ubi_device *ubi) static inline int ubi_dbg_is_bitflip(const struct ubi_device *ubi) { if (ubi->dbg.emulate_bitflips) - return !(random32() % 200); + return !(prandom_u32() % 200); return 0; } @@ -100,7 +100,7 @@ static inline int ubi_dbg_is_bitflip(const struct ubi_device *ubi) static inline int ubi_dbg_is_write_failure(const struct ubi_device *ubi) { if (ubi->dbg.emulate_io_failures) - return !(random32() % 500); + return !(prandom_u32() % 500); return 0; } @@ -114,7 +114,7 @@ static inline int ubi_dbg_is_write_failure(const struct ubi_device *ubi) static inline int ubi_dbg_is_erase_failure(const struct ubi_device *ubi) { if (ubi->dbg.emulate_io_failures) - return !(random32() % 400); + return !(prandom_u32() % 400); return 0; } |