diff options
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/input/serio/i8042-io.h | 2 | ||||
-rw-r--r-- | drivers/mtd/maps/Kconfig | 9 | ||||
-rw-r--r-- | drivers/mtd/maps/Makefile | 1 | ||||
-rw-r--r-- | drivers/mtd/maps/mpc1211.c | 80 | ||||
-rw-r--r-- | drivers/rtc/rtc-sh.c | 14 | ||||
-rw-r--r-- | drivers/serial/bfin_5xx.c | 98 | ||||
-rw-r--r-- | drivers/serial/sh-sci.c | 32 | ||||
-rw-r--r-- | drivers/serial/sh-sci.h | 27 |
8 files changed, 58 insertions, 205 deletions
diff --git a/drivers/input/serio/i8042-io.h b/drivers/input/serio/i8042-io.h index 3b4e13b9ce1..f451c7351a9 100644 --- a/drivers/input/serio/i8042-io.h +++ b/drivers/input/serio/i8042-io.h @@ -25,7 +25,7 @@ #elif defined(__arm__) /* defined in include/asm-arm/arch-xxx/irqs.h */ #include <asm/irq.h> -#elif defined(CONFIG_SUPERH64) +#elif defined(CONFIG_SH_CAYMAN) #include <asm/irq.h> #else # define I8042_KBD_IRQ 1 diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig index 1bd69aa9e22..17bc87a43ff 100644 --- a/drivers/mtd/maps/Kconfig +++ b/drivers/mtd/maps/Kconfig @@ -374,7 +374,7 @@ config MTD_REDWOOD config MTD_SOLUTIONENGINE tristate "CFI Flash device mapped on Hitachi SolutionEngine" - depends on SUPERH && MTD_CFI && MTD_REDBOOT_PARTS + depends on SUPERH && SOLUTION_ENGINE && MTD_CFI && MTD_REDBOOT_PARTS help This enables access to the flash chips on the Hitachi SolutionEngine and similar boards. Say 'Y' if you are building a kernel for such a board. @@ -480,13 +480,6 @@ config MTD_H720X This enables access to the flash chips on the Hynix evaluation boards. If you have such a board, say 'Y'. -config MTD_MPC1211 - tristate "CFI Flash device mapped on Interface MPC-1211" - depends on SH_MPC1211 && MTD_CFI - help - This enables access to the flash chips on the Interface MPC-1211(CTP/PCI/MPC-SH02). - If you have such a board, say 'Y'. - config MTD_OMAP_NOR tristate "TI OMAP board mappings" depends on MTD_CFI && ARCH_OMAP diff --git a/drivers/mtd/maps/Makefile b/drivers/mtd/maps/Makefile index a9cbe80f99a..957fb5f70f5 100644 --- a/drivers/mtd/maps/Makefile +++ b/drivers/mtd/maps/Makefile @@ -58,7 +58,6 @@ obj-$(CONFIG_MTD_WALNUT) += walnut.o obj-$(CONFIG_MTD_H720X) += h720x-flash.o obj-$(CONFIG_MTD_SBC8240) += sbc8240.o obj-$(CONFIG_MTD_NOR_TOTO) += omap-toto-flash.o -obj-$(CONFIG_MTD_MPC1211) += mpc1211.o obj-$(CONFIG_MTD_IXP4XX) += ixp4xx.o obj-$(CONFIG_MTD_IXP2000) += ixp2000.o obj-$(CONFIG_MTD_WRSBC8260) += wr_sbc82xx_flash.o diff --git a/drivers/mtd/maps/mpc1211.c b/drivers/mtd/maps/mpc1211.c deleted file mode 100644 index 45a00fac88a..00000000000 --- a/drivers/mtd/maps/mpc1211.c +++ /dev/null @@ -1,80 +0,0 @@ -/* - * Flash on MPC-1211 - * - * $Id: mpc1211.c,v 1.4 2004/09/16 23:27:13 gleixner Exp $ - * - * (C) 2002 Interface, Saito.K & Jeanne - * - * GPL'd - */ - -#include <linux/module.h> -#include <linux/types.h> -#include <linux/kernel.h> -#include <asm/io.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/map.h> -#include <linux/mtd/partitions.h> - -static struct mtd_info *flash_mtd; -static struct mtd_partition *parsed_parts; - -struct map_info mpc1211_flash_map = { - .name = "MPC-1211 FLASH", - .size = 0x80000, - .bankwidth = 1, -}; - -static struct mtd_partition mpc1211_partitions[] = { - { - .name = "IPL & ETH-BOOT", - .offset = 0x00000000, - .size = 0x10000, - }, - { - .name = "Flash FS", - .offset = 0x00010000, - .size = MTDPART_SIZ_FULL, - } -}; - -static int __init init_mpc1211_maps(void) -{ - int nr_parts; - - mpc1211_flash_map.phys = 0; - mpc1211_flash_map.virt = (void __iomem *)P2SEGADDR(0); - - simple_map_init(&mpc1211_flash_map); - - printk(KERN_NOTICE "Probing for flash chips at 0x00000000:\n"); - flash_mtd = do_map_probe("jedec_probe", &mpc1211_flash_map); - if (!flash_mtd) { - printk(KERN_NOTICE "Flash chips not detected at either possible location.\n"); - return -ENXIO; - } - printk(KERN_NOTICE "MPC-1211: Flash at 0x%08lx\n", mpc1211_flash_map.virt & 0x1fffffff); - flash_mtd->module = THIS_MODULE; - - parsed_parts = mpc1211_partitions; - nr_parts = ARRAY_SIZE(mpc1211_partitions); - - add_mtd_partitions(flash_mtd, parsed_parts, nr_parts); - return 0; -} - -static void __exit cleanup_mpc1211_maps(void) -{ - if (parsed_parts) - del_mtd_partitions(flash_mtd); - else - del_mtd_device(flash_mtd); - map_destroy(flash_mtd); -} - -module_init(init_mpc1211_maps); -module_exit(cleanup_mpc1211_maps); - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Saito.K & Jeanne <ksaito@interface.co.jp>"); -MODULE_DESCRIPTION("MTD map driver for MPC-1211 boards. Interface"); diff --git a/drivers/rtc/rtc-sh.c b/drivers/rtc/rtc-sh.c index 110699bb478..1f88e9e914e 100644 --- a/drivers/rtc/rtc-sh.c +++ b/drivers/rtc/rtc-sh.c @@ -616,7 +616,7 @@ static int __devinit sh_rtc_probe(struct platform_device *pdev) goto err_badres; } - rtc->regbase = (void __iomem *)rtc->res->start; + rtc->regbase = ioremap_nocache(rtc->res->start, rtc->regsize); if (unlikely(!rtc->regbase)) { ret = -EINVAL; goto err_badmap; @@ -626,7 +626,7 @@ static int __devinit sh_rtc_probe(struct platform_device *pdev) &sh_rtc_ops, THIS_MODULE); if (IS_ERR(rtc->rtc_dev)) { ret = PTR_ERR(rtc->rtc_dev); - goto err_badmap; + goto err_unmap; } rtc->capabilities = RTC_DEF_CAPABILITIES; @@ -653,7 +653,7 @@ static int __devinit sh_rtc_probe(struct platform_device *pdev) dev_err(&pdev->dev, "request period IRQ failed with %d, IRQ %d\n", ret, rtc->periodic_irq); - goto err_badmap; + goto err_unmap; } ret = request_irq(rtc->carry_irq, sh_rtc_interrupt, IRQF_DISABLED, @@ -663,7 +663,7 @@ static int __devinit sh_rtc_probe(struct platform_device *pdev) "request carry IRQ failed with %d, IRQ %d\n", ret, rtc->carry_irq); free_irq(rtc->periodic_irq, rtc); - goto err_badmap; + goto err_unmap; } ret = request_irq(rtc->alarm_irq, sh_rtc_alarm, IRQF_DISABLED, @@ -674,7 +674,7 @@ static int __devinit sh_rtc_probe(struct platform_device *pdev) rtc->alarm_irq); free_irq(rtc->carry_irq, rtc); free_irq(rtc->periodic_irq, rtc); - goto err_badmap; + goto err_unmap; } tmp = readb(rtc->regbase + RCR1); @@ -684,6 +684,8 @@ static int __devinit sh_rtc_probe(struct platform_device *pdev) return 0; +err_unmap: + iounmap(rtc->regbase); err_badmap: release_resource(rtc->res); err_badres: @@ -708,6 +710,8 @@ static int __devexit sh_rtc_remove(struct platform_device *pdev) release_resource(rtc->res); + iounmap(rtc->regbase); + platform_set_drvdata(pdev, NULL); kfree(rtc); diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c index 8a2f6a1baa7..d6b4ead693b 100644 --- a/drivers/serial/bfin_5xx.c +++ b/drivers/serial/bfin_5xx.c @@ -65,9 +65,6 @@ static void bfin_serial_stop_tx(struct uart_port *port) { struct bfin_serial_port *uart = (struct bfin_serial_port *)port; struct circ_buf *xmit = &uart->port.info->xmit; -#if !defined(CONFIG_BF54x) && !defined(CONFIG_SERIAL_BFIN_DMA) - unsigned short ier; -#endif while (!(UART_GET_LSR(uart) & TEMT)) cpu_relax(); @@ -82,12 +79,8 @@ static void bfin_serial_stop_tx(struct uart_port *port) #ifdef CONFIG_BF54x /* Clear TFI bit */ UART_PUT_LSR(uart, TFI); - UART_CLEAR_IER(uart, ETBEI); -#else - ier = UART_GET_IER(uart); - ier &= ~ETBEI; - UART_PUT_IER(uart, ier); #endif + UART_CLEAR_IER(uart, ETBEI); #endif } @@ -102,14 +95,7 @@ static void bfin_serial_start_tx(struct uart_port *port) if (uart->tx_done) bfin_serial_dma_tx_chars(uart); #else -#ifdef CONFIG_BF54x UART_SET_IER(uart, ETBEI); -#else - unsigned short ier; - ier = UART_GET_IER(uart); - ier |= ETBEI; - UART_PUT_IER(uart, ier); -#endif bfin_serial_tx_chars(uart); #endif } @@ -120,21 +106,10 @@ static void bfin_serial_start_tx(struct uart_port *port) static void bfin_serial_stop_rx(struct uart_port *port) { struct bfin_serial_port *uart = (struct bfin_serial_port *)port; -#ifdef CONFIG_KGDB_UART - if (uart->port.line != CONFIG_KGDB_UART_PORT) { +#ifdef CONFIG_KGDB_UART + if (uart->port.line != CONFIG_KGDB_UART_PORT) #endif -#ifdef CONFIG_BF54x UART_CLEAR_IER(uart, ERBFI); -#else - unsigned short ier; - - ier = UART_GET_IER(uart); - ier &= ~ERBFI; - UART_PUT_IER(uart, ier); -#endif -#ifdef CONFIG_KGDB_UART - } -#endif } /* @@ -161,10 +136,7 @@ void kgdb_put_debug_char(int chr) SSYNC(); } -#ifndef CONFIG_BF54x - UART_PUT_LCR(uart, UART_GET_LCR(uart)&(~DLAB)); - SSYNC(); -#endif + UART_CLEAR_DLAB(uart); UART_PUT_CHAR(uart, (unsigned char)chr); SSYNC(); } @@ -183,10 +155,7 @@ int kgdb_get_debug_char(void) while(!(UART_GET_LSR(uart) & DR)) { SSYNC(); } -#ifndef CONFIG_BF54x - UART_PUT_LCR(uart, UART_GET_LCR(uart)&(~DLAB)); - SSYNC(); -#endif + UART_CLEAR_DLAB(uart); chr = UART_GET_CHAR(uart); SSYNC(); @@ -208,9 +177,6 @@ static void bfin_serial_rx_chars(struct bfin_serial_port *uart) struct tty_struct *tty = uart->port.info->tty; unsigned int status, ch, flg; static struct timeval anomaly_start = { .tv_sec = 0 }; -#ifdef CONFIG_KGDB_UART - struct pt_regs *regs = get_irq_regs(); -#endif status = UART_GET_LSR(uart); UART_CLEAR_LSR(uart); @@ -220,6 +186,7 @@ static void bfin_serial_rx_chars(struct bfin_serial_port *uart) #ifdef CONFIG_KGDB_UART if (uart->port.line == CONFIG_KGDB_UART_PORT) { + struct pt_regs *regs = get_irq_regs(); if (uart->port.cons->index == CONFIG_KGDB_UART_PORT && ch == 0x1) { /* Ctrl + A */ kgdb_breakkey_pressed(regs); return; @@ -391,7 +358,6 @@ static void bfin_serial_do_work(struct work_struct *work) static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart) { struct circ_buf *xmit = &uart->port.info->xmit; - unsigned short ier; uart->tx_done = 0; @@ -429,13 +395,7 @@ static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart) set_dma_x_modify(uart->tx_dma_channel, 1); enable_dma(uart->tx_dma_channel); -#ifdef CONFIG_BF54x UART_SET_IER(uart, ETBEI); -#else - ier = UART_GET_IER(uart); - ier |= ETBEI; - UART_PUT_IER(uart, ier); -#endif } static void bfin_serial_dma_rx_chars(struct bfin_serial_port *uart) @@ -513,19 +473,12 @@ static irqreturn_t bfin_serial_dma_tx_int(int irq, void *dev_id) { struct bfin_serial_port *uart = dev_id; struct circ_buf *xmit = &uart->port.info->xmit; - unsigned short ier; spin_lock(&uart->port.lock); if (!(get_dma_curr_irqstat(uart->tx_dma_channel)&DMA_RUN)) { disable_dma(uart->tx_dma_channel); clear_dma_irqstat(uart->tx_dma_channel); -#ifdef CONFIG_BF54x UART_CLEAR_IER(uart, ETBEI); -#else - ier = UART_GET_IER(uart); - ier &= ~ETBEI; - UART_PUT_IER(uart, ier); -#endif xmit->tail = (xmit->tail + uart->tx_count) & (UART_XMIT_SIZE - 1); uart->port.icount.tx += uart->tx_count; @@ -701,7 +654,6 @@ static int bfin_serial_startup(struct uart_port *port) # endif } - if (request_irq (uart->port.irq+1, bfin_serial_tx_int, IRQF_DISABLED, "BFIN_UART_TX", uart)) { @@ -710,11 +662,7 @@ static int bfin_serial_startup(struct uart_port *port) return -EBUSY; } #endif -#ifdef CONFIG_BF54x UART_SET_IER(uart, ERBFI); -#else - UART_PUT_IER(uart, UART_GET_IER(uart) | ERBFI); -#endif return 0; } @@ -810,26 +758,15 @@ bfin_serial_set_termios(struct uart_port *port, struct ktermios *termios, UART_PUT_IER(uart, 0); #endif -#ifndef CONFIG_BF54x /* Set DLAB in LCR to Access DLL and DLH */ - val = UART_GET_LCR(uart); - val |= DLAB; - UART_PUT_LCR(uart, val); - SSYNC(); -#endif + UART_SET_DLAB(uart); UART_PUT_DLL(uart, quot & 0xFF); - SSYNC(); UART_PUT_DLH(uart, (quot >> 8) & 0xFF); SSYNC(); -#ifndef CONFIG_BF54x /* Clear DLAB in LCR to Access THR RBR IER */ - val = UART_GET_LCR(uart); - val &= ~DLAB; - UART_PUT_LCR(uart, val); - SSYNC(); -#endif + UART_CLEAR_DLAB(uart); UART_PUT_LCR(uart, lcr); @@ -992,8 +929,7 @@ bfin_serial_console_get_options(struct bfin_serial_port *uart, int *baud, status = UART_GET_IER(uart) & (ERBFI | ETBEI); if (status == (ERBFI | ETBEI)) { /* ok, the port was enabled */ - unsigned short lcr, val; - unsigned short dlh, dll; + u16 lcr, dlh, dll; lcr = UART_GET_LCR(uart); @@ -1010,22 +946,14 @@ bfin_serial_console_get_options(struct bfin_serial_port *uart, int *baud, case 2: *bits = 7; break; case 3: *bits = 8; break; } -#ifndef CONFIG_BF54x /* Set DLAB in LCR to Access DLL and DLH */ - val = UART_GET_LCR(uart); - val |= DLAB; - UART_PUT_LCR(uart, val); -#endif + UART_SET_DLAB(uart); dll = UART_GET_DLL(uart); dlh = UART_GET_DLH(uart); -#ifndef CONFIG_BF54x /* Clear DLAB in LCR to Access THR RBR IER */ - val = UART_GET_LCR(uart); - val &= ~DLAB; - UART_PUT_LCR(uart, val); -#endif + UART_CLEAR_DLAB(uart); *baud = get_sclk() / (16*(dll | dlh << 8)); } @@ -1290,11 +1218,7 @@ static int __init bfin_serial_init(void) request_irq(uart->port.irq, bfin_serial_rx_int, IRQF_DISABLED, "BFIN_UART_RX", uart); pr_info("Request irq for kgdb uart port\n"); -#ifdef CONFIG_BF54x UART_SET_IER(uart, ERBFI); -#else - UART_PUT_IER(uart, UART_GET_IER(uart) | ERBFI); -#endif SSYNC(); t.c_cflag = CS8|B57600; t.c_iflag = 0; diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c index 96910618771..8fdafc27fce 100644 --- a/drivers/serial/sh-sci.c +++ b/drivers/serial/sh-sci.c @@ -42,14 +42,12 @@ #include <linux/console.h> #include <linux/platform_device.h> #include <linux/serial_sci.h> - -#ifdef CONFIG_CPU_FREQ #include <linux/notifier.h> #include <linux/cpufreq.h> -#endif - -#if defined(CONFIG_SUPERH) && !defined(CONFIG_SUPERH64) +#include <linux/clk.h> #include <linux/ctype.h> + +#ifdef CONFIG_SUPERH #include <asm/clock.h> #include <asm/sh_bios.h> #include <asm/kgdb.h> @@ -80,7 +78,7 @@ struct sci_port { struct timer_list break_timer; int break_flag; -#if defined(CONFIG_SUPERH) && !defined(CONFIG_SUPERH64) +#ifdef CONFIG_SUPERH /* Port clock */ struct clk *clk; #endif @@ -365,21 +363,19 @@ static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag) static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag) { unsigned int fcr_val = 0; + unsigned short data; - if (cflag & CRTSCTS) { - fcr_val |= SCFCR_MCE; - - ctrl_outw(0x0000, PORT_PSCR); - } else { - unsigned short data; - - data = ctrl_inw(PORT_PSCR); - data &= 0x033f; - data |= 0x0400; - ctrl_outw(data, PORT_PSCR); + if (port->mapbase == 0xffe00000) { + data = ctrl_inw(PSCR); + data &= ~0x03cf; + if (cflag & CRTSCTS) + fcr_val |= SCFCR_MCE; + else + data |= 0x0340; - ctrl_outw(ctrl_inw(SCSPTR0) & 0x17, SCSPTR0); + ctrl_outw(data, PSCR); } + /* SCIF1 and SCIF2 should be setup by board code */ sci_out(port, SCFCR, fcr_val); } diff --git a/drivers/serial/sh-sci.h b/drivers/serial/sh-sci.h index fa8700a968f..eb84833233f 100644 --- a/drivers/serial/sh-sci.h +++ b/drivers/serial/sh-sci.h @@ -76,12 +76,13 @@ # define SCSCR_INIT(port) 0x32 /* TIE=0,RIE=0,TE=1,RE=1,REIE=0,CKE=1 */ # define SCIF_ONLY #elif defined(CONFIG_CPU_SUBTYPE_SH7722) -# define SCPDR0 0xA405013E /* 16 bit SCIF0 PSDR */ -# define SCSPTR0 SCPDR0 +# define PADR 0xA4050120 +# define PSDR 0xA405013e +# define PWDR 0xA4050166 +# define PSCR 0xA405011E # define SCIF_ORER 0x0001 /* overrun error bit */ # define SCSCR_INIT(port) 0x0038 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ # define SCIF_ONLY -# define PORT_PSCR 0xA405011E #elif defined(CONFIG_CPU_SUBTYPE_SH7366) # define SCPDR0 0xA405013E /* 16 bit SCIF0 PSDR */ # define SCSPTR0 SCPDR0 @@ -320,7 +321,7 @@ unsigned int addr = port->mapbase + (offset); \ if ((size) == 8) { \ ctrl_outb(value, addr); \ - } else { \ + } else if ((size) == 16) { \ ctrl_outw(value, addr); \ } @@ -451,7 +452,11 @@ SCIF_FNS(SCSPTR, 0, 0, 0x24, 16) SCIF_FNS(SCLSR, 0, 0, 0x28, 16) #else SCIF_FNS(SCFDR, 0x0e, 16, 0x1C, 16) +#if defined(CONFIG_CPU_SUBTYPE_SH7722) +SCIF_FNS(SCSPTR, 0, 0, 0, 0) +#else SCIF_FNS(SCSPTR, 0, 0, 0x20, 16) +#endif SCIF_FNS(SCLSR, 0, 0, 0x24, 16) #endif #endif @@ -593,13 +598,25 @@ static inline int sci_rxd_in(struct uart_port *port) return ctrl_inw(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF */ return 1; } -#elif defined(CONFIG_CPU_SUBTYPE_SH7722) || defined(CONFIG_CPU_SUBTYPE_SH7366) +#elif defined(CONFIG_CPU_SUBTYPE_SH7366) static inline int sci_rxd_in(struct uart_port *port) { if (port->mapbase == 0xffe00000) return ctrl_inb(SCPDR0) & 0x0001 ? 1 : 0; /* SCIF0 */ return 1; } +#elif defined(CONFIG_CPU_SUBTYPE_SH7722) +static inline int sci_rxd_in(struct uart_port *port) +{ + if (port->mapbase == 0xffe00000) + return ctrl_inb(PSDR) & 0x02 ? 1 : 0; /* SCIF0 */ + if (port->mapbase == 0xffe10000) + return ctrl_inb(PADR) & 0x40 ? 1 : 0; /* SCIF1 */ + if (port->mapbase == 0xffe20000) + return ctrl_inb(PWDR) & 0x04 ? 1 : 0; /* SCIF2 */ + + return 1; +} #elif defined(CONFIG_CPU_SUBTYPE_SH7723) static inline int sci_rxd_in(struct uart_port *port) { |