diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/ide/ide-tape.c | 73 |
1 files changed, 0 insertions, 73 deletions
diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index bbf60ee582b..99084663a7c 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -106,7 +106,6 @@ typedef struct os_dat_s { /* * The following are used to debug the driver: * - * Setting IDETAPE_DEBUG_INFO to 1 will report device capabilities. * Setting IDETAPE_DEBUG_LOG to 1 will log driver flow control. * Setting IDETAPE_DEBUG_BUGS to 1 will enable self-sanity checks in * some places. @@ -121,7 +120,6 @@ typedef struct os_dat_s { * is verified to be stable enough. This will make it much more * esthetic. */ -#define IDETAPE_DEBUG_INFO 0 #define IDETAPE_DEBUG_LOG 0 #define IDETAPE_DEBUG_BUGS 1 @@ -3815,41 +3813,6 @@ static int idetape_identify_device (ide_drive_t *drive) *((unsigned short *) &gcw) = id->config; -#if IDETAPE_DEBUG_INFO - printk(KERN_INFO "ide-tape: Dumping ATAPI Identify Device tape parameters\n"); - printk(KERN_INFO "ide-tape: Protocol Type: "); - switch (gcw.protocol) { - case 0: case 1: printk("ATA\n");break; - case 2: printk("ATAPI\n");break; - case 3: printk("Reserved (Unknown to ide-tape)\n");break; - } - printk(KERN_INFO "ide-tape: Device Type: %x - ",gcw.device_type); - switch (gcw.device_type) { - case 0: printk("Direct-access Device\n");break; - case 1: printk("Streaming Tape Device\n");break; - case 2: case 3: case 4: printk("Reserved\n");break; - case 5: printk("CD-ROM Device\n");break; - case 6: printk("Reserved\n"); - case 7: printk("Optical memory Device\n");break; - case 0x1f: printk("Unknown or no Device type\n");break; - default: printk("Reserved\n"); - } - printk(KERN_INFO "ide-tape: Removable: %s",gcw.removable ? "Yes\n":"No\n"); - printk(KERN_INFO "ide-tape: Command Packet DRQ Type: "); - switch (gcw.drq_type) { - case 0: printk("Microprocessor DRQ\n");break; - case 1: printk("Interrupt DRQ\n");break; - case 2: printk("Accelerated DRQ\n");break; - case 3: printk("Reserved\n");break; - } - printk(KERN_INFO "ide-tape: Command Packet Size: "); - switch (gcw.packet_size) { - case 0: printk("12 bytes\n");break; - case 1: printk("16 bytes\n");break; - default: printk("Reserved\n");break; - } -#endif /* IDETAPE_DEBUG_INFO */ - /* Check that we can support this device */ if (gcw.protocol != 2) @@ -3938,38 +3901,6 @@ static void idetape_get_mode_sense_results (ide_drive_t *drive) tape->tape_block_size = 512; else if (capabilities->blk1024) tape->tape_block_size = 1024; - -#if IDETAPE_DEBUG_INFO - printk(KERN_INFO "ide-tape: Dumping the results of the MODE SENSE packet command\n"); - printk(KERN_INFO "ide-tape: Mode Parameter Header:\n"); - printk(KERN_INFO "ide-tape: Mode Data Length - %d\n", pc.buffer[0]); - printk(KERN_INFO "ide-tape: Medium Type - %d\n", pc.buffer[1]); - printk(KERN_INFO "ide-tape: Device Specific Parameter - %d\n", - pc.buffer[2]); - printk(KERN_INFO "ide-tape: Block Descriptor Length - %d\n", - pc.buffer[3]); - - printk(KERN_INFO "ide-tape: Capabilities and Mechanical Status Page:\n"); - printk(KERN_INFO "ide-tape: Page code - %d\n",capabilities->page_code); - printk(KERN_INFO "ide-tape: Page length - %d\n",capabilities->page_length); - printk(KERN_INFO "ide-tape: Read only - %s\n",capabilities->ro ? "Yes":"No"); - printk(KERN_INFO "ide-tape: Supports reverse space - %s\n",capabilities->sprev ? "Yes":"No"); - printk(KERN_INFO "ide-tape: Supports erase initiated formatting - %s\n",capabilities->efmt ? "Yes":"No"); - printk(KERN_INFO "ide-tape: Supports QFA two Partition format - %s\n",capabilities->qfa ? "Yes":"No"); - printk(KERN_INFO "ide-tape: Supports locking the medium - %s\n",capabilities->lock ? "Yes":"No"); - printk(KERN_INFO "ide-tape: The volume is currently locked - %s\n",capabilities->locked ? "Yes":"No"); - printk(KERN_INFO "ide-tape: The device defaults in the prevent state - %s\n",capabilities->prevent ? "Yes":"No"); - printk(KERN_INFO "ide-tape: Supports ejecting the medium - %s\n",capabilities->eject ? "Yes":"No"); - printk(KERN_INFO "ide-tape: Supports error correction - %s\n",capabilities->ecc ? "Yes":"No"); - printk(KERN_INFO "ide-tape: Supports data compression - %s\n",capabilities->cmprs ? "Yes":"No"); - printk(KERN_INFO "ide-tape: Supports 512 bytes block size - %s\n",capabilities->blk512 ? "Yes":"No"); - printk(KERN_INFO "ide-tape: Supports 1024 bytes block size - %s\n",capabilities->blk1024 ? "Yes":"No"); - printk(KERN_INFO "ide-tape: Supports 32768 bytes block size / Restricted byte count for PIO transfers - %s\n",capabilities->blk32768 ? "Yes":"No"); - printk(KERN_INFO "ide-tape: Maximum supported speed in KBps - %d\n",capabilities->max_speed); - printk(KERN_INFO "ide-tape: Continuous transfer limits in blocks - %d\n",capabilities->ctl); - printk(KERN_INFO "ide-tape: Current speed in KBps - %d\n",capabilities->speed); - printk(KERN_INFO "ide-tape: Buffer size - %d\n",capabilities->buffer_size*512); -#endif /* IDETAPE_DEBUG_INFO */ } /* @@ -3995,10 +3926,6 @@ static void idetape_get_blocksize_from_block_descriptor(ide_drive_t *drive) block_descrp = (idetape_parameter_block_descriptor_t *)(pc.buffer + 4); tape->tape_block_size =( block_descrp->length[0]<<16) + (block_descrp->length[1]<<8) + block_descrp->length[2]; tape->drv_write_prot = (pc.buffer[2] & 0x80) >> 7; - -#if IDETAPE_DEBUG_INFO - printk(KERN_INFO "ide-tape: Adjusted block size - %d\n", tape->tape_block_size); -#endif /* IDETAPE_DEBUG_INFO */ } #ifdef CONFIG_IDE_PROC_FS |