diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/xen/Kconfig | 30 | ||||
| -rw-r--r-- | drivers/xen/balloon.c | 139 |
2 files changed, 167 insertions, 2 deletions
diff --git a/drivers/xen/Kconfig b/drivers/xen/Kconfig index 03bc471c3ee..f815283667a 100644 --- a/drivers/xen/Kconfig +++ b/drivers/xen/Kconfig @@ -26,6 +26,36 @@ config XEN_SELFBALLOONING kernel boot parameter. Note that systems without a sufficiently large swap device should not enable self-ballooning. +config XEN_BALLOON_MEMORY_HOTPLUG + bool "Memory hotplug support for Xen balloon driver" + default n + depends on XEN_BALLOON && MEMORY_HOTPLUG + help + Memory hotplug support for Xen balloon driver allows expanding memory + available for the system above limit declared at system startup. + It is very useful on critical systems which require long + run without rebooting. + + Memory could be hotplugged in following steps: + + 1) dom0: xl mem-max <domU> <maxmem> + where <maxmem> is >= requested memory size, + + 2) dom0: xl mem-set <domU> <memory> + where <memory> is requested memory size; alternatively memory + could be added by writing proper value to + /sys/devices/system/xen_memory/xen_memory0/target or + /sys/devices/system/xen_memory/xen_memory0/target_kb on dumU, + + 3) domU: for i in /sys/devices/system/memory/memory*/state; do \ + [ "`cat "$i"`" = offline ] && echo online > "$i"; done + + Memory could be onlined automatically on domU by adding following line to udev rules: + + SUBSYSTEM=="memory", ACTION=="add", RUN+="/bin/sh -c '[ -f /sys$devpath/state ] && echo online > /sys$devpath/state'" + + In that case step 3 should be omitted. + config XEN_SCRUB_PAGES bool "Scrub pages before returning them to system" depends on XEN_BALLOON diff --git a/drivers/xen/balloon.c b/drivers/xen/balloon.c index f54290baa3d..5dfd8f8ff07 100644 --- a/drivers/xen/balloon.c +++ b/drivers/xen/balloon.c @@ -4,6 +4,12 @@ * Copyright (c) 2003, B Dragovic * Copyright (c) 2003-2004, M Williamson, K Fraser * Copyright (c) 2005 Dan M. Smith, IBM Corporation + * Copyright (c) 2010 Daniel Kiper + * + * Memory hotplug support was written by Daniel Kiper. Work on + * it was sponsored by Google under Google Summer of Code 2010 + * program. Jeremy Fitzhardinge from Citrix was the mentor for + * this project. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License version 2 @@ -40,6 +46,9 @@ #include <linux/mutex.h> #include <linux/list.h> #include <linux/gfp.h> +#include <linux/notifier.h> +#include <linux/memory.h> +#include <linux/memory_hotplug.h> #include <asm/page.h> #include <asm/pgalloc.h> @@ -194,6 +203,87 @@ static enum bp_state update_schedule(enum bp_state state) return BP_EAGAIN; } +#ifdef CONFIG_XEN_BALLOON_MEMORY_HOTPLUG +static long current_credit(void) +{ + return balloon_stats.target_pages - balloon_stats.current_pages - + balloon_stats.hotplug_pages; +} + +static bool balloon_is_inflated(void) +{ + if (balloon_stats.balloon_low || balloon_stats.balloon_high || + balloon_stats.balloon_hotplug) + return true; + else + return false; +} + +/* + * reserve_additional_memory() adds memory region of size >= credit above + * max_pfn. New region is section aligned and size is modified to be multiple + * of section size. Those features allow optimal use of address space and + * establish proper alignment when this function is called first time after + * boot (last section not fully populated at boot time contains unused memory + * pages with PG_reserved bit not set; online_pages_range() does not allow page + * onlining in whole range if first onlined page does not have PG_reserved + * bit set). Real size of added memory is established at page onlining stage. + */ + +static enum bp_state reserve_additional_memory(long credit) +{ + int nid, rc; + u64 hotplug_start_paddr; + unsigned long balloon_hotplug = credit; + + hotplug_start_paddr = PFN_PHYS(SECTION_ALIGN_UP(max_pfn)); + balloon_hotplug = round_up(balloon_hotplug, PAGES_PER_SECTION); + nid = memory_add_physaddr_to_nid(hotplug_start_paddr); + + rc = add_memory(nid, hotplug_start_paddr, balloon_hotplug << PAGE_SHIFT); + + if (rc) { + pr_info("xen_balloon: %s: add_memory() failed: %i\n", __func__, rc); + return BP_EAGAIN; + } + + balloon_hotplug -= credit; + + balloon_stats.hotplug_pages += credit; + balloon_stats.balloon_hotplug = balloon_hotplug; + + return BP_DONE; +} + +static void xen_online_page(struct page *page) +{ + __online_page_set_limits(page); + + mutex_lock(&balloon_mutex); + + __balloon_append(page); + + if (balloon_stats.hotplug_pages) + --balloon_stats.hotplug_pages; + else + --balloon_stats.balloon_hotplug; + + mutex_unlock(&balloon_mutex); +} + +static int xen_memory_notifier(struct notifier_block *nb, unsigned long val, void *v) +{ + if (val == MEM_ONLINE) + schedule_delayed_work(&balloon_worker, 0); + + return NOTIFY_OK; +} + +static struct notifier_block xen_memory_nb = { + .notifier_call = xen_memory_notifier, + .priority = 0 +}; +#else static long current_credit(void) { unsigned long target = balloon_stats.target_pages; @@ -206,6 +296,21 @@ static long current_credit(void) return target - balloon_stats.current_pages; } +static bool balloon_is_inflated(void) +{ + if (balloon_stats.balloon_low || balloon_stats.balloon_high) + return true; + else + return false; +} + +static enum bp_state reserve_additional_memory(long credit) +{ + balloon_stats.target_pages = balloon_stats.current_pages; + return BP_DONE; +} +#endif /* CONFIG_XEN_BALLOON_MEMORY_HOTPLUG */ + static enum bp_state increase_reservation(unsigned long nr_pages) { int rc; @@ -217,6 +322,15 @@ static enum bp_state increase_reservation(unsigned long nr_pages) .domid = DOMID_SELF }; +#ifdef CONFIG_XEN_BALLOON_MEMORY_HOTPLUG + if (!balloon_stats.balloon_low && !balloon_stats.balloon_high) { + nr_pages = min(nr_pages, balloon_stats.balloon_hotplug); + balloon_stats.hotplug_pages += nr_pages; + balloon_stats.balloon_hotplug -= nr_pages; + return BP_DONE; + } +#endif + if (nr_pages > ARRAY_SIZE(frame_list)) nr_pages = ARRAY_SIZE(frame_list); @@ -279,6 +393,15 @@ static enum bp_state decrease_reservation(unsigned long nr_pages, gfp_t gfp) .domid = DOMID_SELF }; +#ifdef CONFIG_XEN_BALLOON_MEMORY_HOTPLUG + if (balloon_stats.hotplug_pages) { + nr_pages = min(nr_pages, balloon_stats.hotplug_pages); + balloon_stats.hotplug_pages -= nr_pages; + balloon_stats.balloon_hotplug += nr_pages; + return BP_DONE; + } +#endif + if (nr_pages > ARRAY_SIZE(frame_list)) nr_pages = ARRAY_SIZE(frame_list); @@ -340,8 +463,12 @@ static void balloon_process(struct work_struct *work) do { credit = current_credit(); - if (credit > 0) - state = increase_reservation(credit); + if (credit > 0) { + if (balloon_is_inflated()) + state = increase_reservation(credit); + else + state = reserve_additional_memory(credit); + } if (credit < 0) state = decrease_reservation(-credit, GFP_BALLOON); @@ -448,6 +575,14 @@ static int __init balloon_init(void) balloon_stats.retry_count = 1; balloon_stats.max_retry_count = RETRY_UNLIMITED; +#ifdef CONFIG_XEN_BALLOON_MEMORY_HOTPLUG + balloon_stats.hotplug_pages = 0; + balloon_stats.balloon_hotplug = 0; + + set_online_page_callback(&xen_online_page); + register_memory_notifier(&xen_memory_nb); +#endif + /* * Initialise the balloon with excess memory space. We need * to make sure we don't add memory which doesn't exist or |