diff options
Diffstat (limited to 'drivers/w1')
| -rw-r--r-- | drivers/w1/masters/mxc_w1.c | 6 | ||||
| -rw-r--r-- | drivers/w1/slaves/Kconfig | 10 | ||||
| -rw-r--r-- | drivers/w1/slaves/w1_ds2408.c | 25 |
3 files changed, 28 insertions, 13 deletions
diff --git a/drivers/w1/masters/mxc_w1.c b/drivers/w1/masters/mxc_w1.c index 950d354d50e..47e12cfc2a5 100644 --- a/drivers/w1/masters/mxc_w1.c +++ b/drivers/w1/masters/mxc_w1.c @@ -121,9 +121,9 @@ static int mxc_w1_probe(struct platform_device *pdev) mdev->clkdiv = (clk_get_rate(mdev->clk) / 1000000) - 1; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - mdev->regs = devm_request_and_ioremap(&pdev->dev, res); - if (!mdev->regs) - return -EBUSY; + mdev->regs = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(mdev->regs)) + return PTR_ERR(mdev->regs); clk_prepare_enable(mdev->clk); __raw_writeb(mdev->clkdiv, mdev->regs + MXC_W1_TIME_DIVIDER); diff --git a/drivers/w1/slaves/Kconfig b/drivers/w1/slaves/Kconfig index 762561fbabb..5e6a3c9e510 100644 --- a/drivers/w1/slaves/Kconfig +++ b/drivers/w1/slaves/Kconfig @@ -22,6 +22,16 @@ config W1_SLAVE_DS2408 Say Y here if you want to use a 1-wire DS2408 8-Channel Addressable Switch device support +config W1_SLAVE_DS2408_READBACK + bool "Read-back values written to DS2408's output register" + depends on W1_SLAVE_DS2408 + default y + help + Enabling this will cause the driver to read back the values written + to the chip's output register in order to detect errors. + + This is slower but useful when debugging chips and/or busses. + config W1_SLAVE_DS2413 tristate "Dual Channel Addressable Switch 0x3a family support (DS2413)" help diff --git a/drivers/w1/slaves/w1_ds2408.c b/drivers/w1/slaves/w1_ds2408.c index 441ad3a3b58..e45eca1044b 100644 --- a/drivers/w1/slaves/w1_ds2408.c +++ b/drivers/w1/slaves/w1_ds2408.c @@ -178,6 +178,15 @@ static ssize_t w1_f29_write_output( w1_write_block(sl->master, w1_buf, 3); readBack = w1_read_8(sl->master); + + if (readBack != W1_F29_SUCCESS_CONFIRM_BYTE) { + if (w1_reset_resume_command(sl->master)) + goto error; + /* try again, the slave is ready for a command */ + continue; + } + +#ifdef CONFIG_W1_SLAVE_DS2408_READBACK /* here the master could read another byte which would be the PIO reg (the actual pin logic state) since in this driver we don't know which pins are @@ -186,11 +195,6 @@ static ssize_t w1_f29_write_output( if (w1_reset_resume_command(sl->master)) goto error; - if (readBack != 0xAA) { - /* try again, the slave is ready for a command */ - continue; - } - /* go read back the output latches */ /* (the direct effect of the write above) */ w1_buf[0] = W1_F29_FUNC_READ_PIO_REGS; @@ -198,7 +202,9 @@ static ssize_t w1_f29_write_output( w1_buf[2] = 0; w1_write_block(sl->master, w1_buf, 3); /* read the result of the READ_PIO_REGS command */ - if (w1_read_8(sl->master) == *buf) { + if (w1_read_8(sl->master) == *buf) +#endif + { /* success! */ mutex_unlock(&sl->master->bus_mutex); dev_dbg(&sl->dev, @@ -297,8 +303,7 @@ error: -#define NB_SYSFS_BIN_FILES 6 -static struct bin_attribute w1_f29_sysfs_bin_files[NB_SYSFS_BIN_FILES] = { +static struct bin_attribute w1_f29_sysfs_bin_files[] = { { .attr = { .name = "state", @@ -357,7 +362,7 @@ static int w1_f29_add_slave(struct w1_slave *sl) int err = 0; int i; - for (i = 0; i < NB_SYSFS_BIN_FILES && !err; ++i) + for (i = 0; i < ARRAY_SIZE(w1_f29_sysfs_bin_files) && !err; ++i) err = sysfs_create_bin_file( &sl->dev.kobj, &(w1_f29_sysfs_bin_files[i])); @@ -371,7 +376,7 @@ static int w1_f29_add_slave(struct w1_slave *sl) static void w1_f29_remove_slave(struct w1_slave *sl) { int i; - for (i = NB_SYSFS_BIN_FILES - 1; i >= 0; --i) + for (i = ARRAY_SIZE(w1_f29_sysfs_bin_files) - 1; i >= 0; --i) sysfs_remove_bin_file(&sl->dev.kobj, &(w1_f29_sysfs_bin_files[i])); } |