diff options
Diffstat (limited to 'drivers/usb')
53 files changed, 427 insertions, 2709 deletions
diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c index 1c50baff772..d2b3cffca3f 100644 --- a/drivers/usb/class/cdc-wdm.c +++ b/drivers/usb/class/cdc-wdm.c @@ -57,6 +57,8 @@ MODULE_DEVICE_TABLE (usb, wdm_ids); #define WDM_MAX 16 +/* CDC-WMC r1.1 requires wMaxCommand to be "at least 256 decimal (0x100)" */ +#define WDM_DEFAULT_BUFSIZE 256 static DEFINE_MUTEX(wdm_mutex); @@ -88,7 +90,8 @@ struct wdm_device { int count; dma_addr_t shandle; dma_addr_t ihandle; - struct mutex lock; + struct mutex wlock; + struct mutex rlock; wait_queue_head_t wait; struct work_struct rxwork; int werr; @@ -323,7 +326,7 @@ static ssize_t wdm_write } /* concurrent writes and disconnect */ - r = mutex_lock_interruptible(&desc->lock); + r = mutex_lock_interruptible(&desc->wlock); rv = -ERESTARTSYS; if (r) { kfree(buf); @@ -386,7 +389,7 @@ static ssize_t wdm_write out: usb_autopm_put_interface(desc->intf); outnp: - mutex_unlock(&desc->lock); + mutex_unlock(&desc->wlock); outnl: return rv < 0 ? rv : count; } @@ -399,7 +402,7 @@ static ssize_t wdm_read struct wdm_device *desc = file->private_data; - rv = mutex_lock_interruptible(&desc->lock); /*concurrent reads */ + rv = mutex_lock_interruptible(&desc->rlock); /*concurrent reads */ if (rv < 0) return -ERESTARTSYS; @@ -467,14 +470,16 @@ retry: for (i = 0; i < desc->length - cntr; i++) desc->ubuf[i] = desc->ubuf[i + cntr]; + spin_lock_irq(&desc->iuspin); desc->length -= cntr; + spin_unlock_irq(&desc->iuspin); /* in case we had outstanding data */ if (!desc->length) clear_bit(WDM_READ, &desc->flags); rv = cntr; err: - mutex_unlock(&desc->lock); + mutex_unlock(&desc->rlock); return rv; } @@ -540,7 +545,8 @@ static int wdm_open(struct inode *inode, struct file *file) } intf->needs_remote_wakeup = 1; - mutex_lock(&desc->lock); + /* using write lock to protect desc->count */ + mutex_lock(&desc->wlock); if (!desc->count++) { desc->werr = 0; desc->rerr = 0; @@ -553,7 +559,7 @@ static int wdm_open(struct inode *inode, struct file *file) } else { rv = 0; } - mutex_unlock(&desc->lock); + mutex_unlock(&desc->wlock); usb_autopm_put_interface(desc->intf); out: mutex_unlock(&wdm_mutex); @@ -565,9 +571,11 @@ static int wdm_release(struct inode *inode, struct file *file) struct wdm_device *desc = file->private_data; mutex_lock(&wdm_mutex); - mutex_lock(&desc->lock); + + /* using write lock to protect desc->count */ + mutex_lock(&desc->wlock); desc->count--; - mutex_unlock(&desc->lock); + mutex_unlock(&desc->wlock); if (!desc->count) { dev_dbg(&desc->intf->dev, "wdm_release: cleanup"); @@ -630,7 +638,7 @@ static int wdm_probe(struct usb_interface *intf, const struct usb_device_id *id) struct usb_cdc_dmm_desc *dmhd; u8 *buffer = intf->altsetting->extra; int buflen = intf->altsetting->extralen; - u16 maxcom = 0; + u16 maxcom = WDM_DEFAULT_BUFSIZE; if (!buffer) goto out; @@ -665,7 +673,8 @@ next_desc: desc = kzalloc(sizeof(struct wdm_device), GFP_KERNEL); if (!desc) goto out; - mutex_init(&desc->lock); + mutex_init(&desc->rlock); + mutex_init(&desc->wlock); spin_lock_init(&desc->iuspin); init_waitqueue_head(&desc->wait); desc->wMaxCommand = maxcom; @@ -716,7 +725,7 @@ next_desc: goto err; desc->inbuf = usb_alloc_coherent(interface_to_usbdev(intf), - desc->bMaxPacketSize0, + desc->wMaxCommand, GFP_KERNEL, &desc->response->transfer_dma); if (!desc->inbuf) @@ -779,11 +788,13 @@ static void wdm_disconnect(struct usb_interface *intf) /* to terminate pending flushes */ clear_bit(WDM_IN_USE, &desc->flags); spin_unlock_irqrestore(&desc->iuspin, flags); - mutex_lock(&desc->lock); + wake_up_all(&desc->wait); + mutex_lock(&desc->rlock); + mutex_lock(&desc->wlock); kill_urbs(desc); cancel_work_sync(&desc->rxwork); - mutex_unlock(&desc->lock); - wake_up_all(&desc->wait); + mutex_unlock(&desc->wlock); + mutex_unlock(&desc->rlock); if (!desc->count) cleanup(desc); mutex_unlock(&wdm_mutex); @@ -798,8 +809,10 @@ static int wdm_suspend(struct usb_interface *intf, pm_message_t message) dev_dbg(&desc->intf->dev, "wdm%d_suspend\n", intf->minor); /* if this is an autosuspend the caller does the locking */ - if (!PMSG_IS_AUTO(message)) - mutex_lock(&desc->lock); + if (!PMSG_IS_AUTO(message)) { + mutex_lock(&desc->rlock); + mutex_lock(&desc->wlock); + } spin_lock_irq(&desc->iuspin); if (PMSG_IS_AUTO(message) && @@ -815,8 +828,10 @@ static int wdm_suspend(struct usb_interface *intf, pm_message_t message) kill_urbs(desc); cancel_work_sync(&desc->rxwork); } - if (!PMSG_IS_AUTO(message)) - mutex_unlock(&desc->lock); + if (!PMSG_IS_AUTO(message)) { + mutex_unlock(&desc->wlock); + mutex_unlock(&desc->rlock); + } return rv; } @@ -854,7 +869,8 @@ static int wdm_pre_reset(struct usb_interface *intf) { struct wdm_device *desc = usb_get_intfdata(intf); - mutex_lock(&desc->lock); + mutex_lock(&desc->rlock); + mutex_lock(&desc->wlock); kill_urbs(desc); /* @@ -876,7 +892,8 @@ static int wdm_post_reset(struct usb_interface *intf) int rv; rv = recover_from_urb_loss(desc); - mutex_unlock(&desc->lock); + mutex_unlock(&desc->wlock); + mutex_unlock(&desc->rlock); return 0; } diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c index d136b8f4c8a..81e2c0d9c17 100644 --- a/drivers/usb/core/hcd-pci.c +++ b/drivers/usb/core/hcd-pci.c @@ -187,7 +187,10 @@ int usb_hcd_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) return -ENODEV; dev->current_state = PCI_D0; - if (!dev->irq) { + /* The xHCI driver supports MSI and MSI-X, + * so don't fail if the BIOS doesn't provide a legacy IRQ. + */ + if (!dev->irq && (driver->flags & HCD_MASK) != HCD_USB3) { dev_err(&dev->dev, "Found HC with no IRQ. Check BIOS/PCI %s setup!\n", pci_name(dev)); diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index eb19cba34ac..e1282328fc2 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -2447,8 +2447,10 @@ int usb_add_hcd(struct usb_hcd *hcd, && device_can_wakeup(&hcd->self.root_hub->dev)) dev_dbg(hcd->self.controller, "supports USB remote wakeup\n"); - /* enable irqs just before we start the controller */ - if (usb_hcd_is_primary_hcd(hcd)) { + /* enable irqs just before we start the controller, + * if the BIOS provides legacy PCI irqs. + */ + if (usb_hcd_is_primary_hcd(hcd) && irqnum) { retval = usb_hcd_request_irqs(hcd, irqnum, irqflags); if (retval) goto err_request_irq; diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index a0613d8f9be..265c2f675d0 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -705,10 +705,26 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type) if (type == HUB_INIT3) goto init3; - /* After a resume, port power should still be on. + /* The superspeed hub except for root hub has to use Hub Depth + * value as an offset into the route string to locate the bits + * it uses to determine the downstream port number. So hub driver + * should send a set hub depth request to superspeed hub after + * the superspeed hub is set configuration in initialization or + * reset procedure. + * + * After a resume, port power should still be on. * For any other type of activation, turn it on. */ if (type != HUB_RESUME) { + if (hdev->parent && hub_is_superspeed(hdev)) { + ret = usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0), + HUB_SET_DEPTH, USB_RT_HUB, + hdev->level - 1, 0, NULL, 0, + USB_CTRL_SET_TIMEOUT); + if (ret < 0) + dev_err(hub->intfdev, + "set hub depth failed\n"); + } /* Speed up system boot by using a delayed_work for the * hub's initial power-up delays. This is pretty awkward @@ -987,18 +1003,6 @@ static int hub_configure(struct usb_hub *hub, goto fail; } - if (hub_is_superspeed(hdev) && (hdev->parent != NULL)) { - ret = usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0), - HUB_SET_DEPTH, USB_RT_HUB, - hdev->level - 1, 0, NULL, 0, - USB_CTRL_SET_TIMEOUT); - - if (ret < 0) { - message = "can't set hub depth"; - goto fail; - } - } - /* Request the entire hub descriptor. * hub->descriptor can handle USB_MAXCHILDREN ports, * but the hub can/will return fewer bytes here. diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c index 2f51de57593..c8df1dd967e 100644 --- a/drivers/usb/dwc3/ep0.c +++ b/drivers/usb/dwc3/ep0.c @@ -126,7 +126,6 @@ static int __dwc3_gadget_ep0_queue(struct dwc3_ep *dep, struct dwc3_request *req) { struct dwc3 *dwc = dep->dwc; - u32 type; int ret = 0; req->request.actual = 0; @@ -149,20 +148,14 @@ static int __dwc3_gadget_ep0_queue(struct dwc3_ep *dep, direction = !!(dep->flags & DWC3_EP0_DIR_IN); - if (dwc->ep0state == EP0_STATUS_PHASE) { - type = dwc->three_stage_setup - ? DWC3_TRBCTL_CONTROL_STATUS3 - : DWC3_TRBCTL_CONTROL_STATUS2; - } else if (dwc->ep0state == EP0_DATA_PHASE) { - type = DWC3_TRBCTL_CONTROL_DATA; - } else { - /* should never happen */ - WARN_ON(1); + if (dwc->ep0state != EP0_DATA_PHASE) { + dev_WARN(dwc->dev, "Unexpected pending request\n"); return 0; } ret = dwc3_ep0_start_trans(dwc, direction, - req->request.dma, req->request.length, type); + req->request.dma, req->request.length, + DWC3_TRBCTL_CONTROL_DATA); dep->flags &= ~(DWC3_EP_PENDING_REQUEST | DWC3_EP0_DIR_IN); } else if (dwc->delayed_status) { diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index a696bde5322..064b6e2cd41 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -101,7 +101,7 @@ void dwc3_unmap_buffer_from_dma(struct dwc3_request *req) if (req->request.num_mapped_sgs) { req->request.dma = DMA_ADDR_INVALID; dma_unmap_sg(dwc->dev, req->request.sg, - req->request.num_sgs, + req->request.num_mapped_sgs, req->direction ? DMA_TO_DEVICE : DMA_FROM_DEVICE); diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c index a95de6a4a13..baaebf2830f 100644 --- a/drivers/usb/gadget/composite.c +++ b/drivers/usb/gadget/composite.c @@ -175,13 +175,12 @@ ep_found: _ep->comp_desc = comp_desc; if (g->speed == USB_SPEED_SUPER) { switch (usb_endpoint_type(_ep->desc)) { - case USB_ENDPOINT_XFER_BULK: - case USB_ENDPOINT_XFER_INT: - _ep->maxburst = comp_desc->bMaxBurst; - break; case USB_ENDPOINT_XFER_ISOC: /* mult: bits 1:0 of bmAttributes */ _ep->mult = comp_desc->bmAttributes & 0x3; + case USB_ENDPOINT_XFER_BULK: + case USB_ENDPOINT_XFER_INT: + _ep->maxburst = comp_desc->bMaxBurst; break; default: /* Do nothing for control endpoints */ diff --git a/drivers/usb/gadget/epautoconf.c b/drivers/usb/gadget/epautoconf.c index 753aa0683ac..e0e6375ef5d 100644 --- a/drivers/usb/gadget/epautoconf.c +++ b/drivers/usb/gadget/epautoconf.c @@ -126,7 +126,7 @@ ep_matches ( * descriptor and see if the EP matches it */ if (usb_endpoint_xfer_bulk(desc)) { - if (ep_comp) { + if (ep_comp && gadget->max_speed >= USB_SPEED_SUPER) { num_req_streams = ep_comp->bmAttributes & 0x1f; if (num_req_streams > ep->max_streams) return 0; diff --git a/drivers/usb/gadget/f_loopback.c b/drivers/usb/gadget/f_loopback.c index 6d87f288df4..2c0cd824c66 100644 --- a/drivers/usb/gadget/f_loopback.c +++ b/drivers/usb/gadget/f_loopback.c @@ -418,7 +418,7 @@ int __init loopback_add(struct usb_composite_dev *cdev, bool autoresume) /* support autoresume for remote wakeup testing */ if (autoresume) - sourcesink_driver.bmAttributes |= USB_CONFIG_ATT_WAKEUP; + loopback_driver.bmAttributes |= USB_CONFIG_ATT_WAKEUP; /* support OTG systems */ if (gadget_is_otg(cdev->gadget)) { diff --git a/drivers/usb/gadget/f_mass_storage.c b/drivers/usb/gadget/f_mass_storage.c index 6353eca1e85..ee8ceec0156 100644 --- a/drivers/usb/gadget/f_mass_storage.c +++ b/drivers/usb/gadget/f_mass_storage.c @@ -3123,15 +3123,15 @@ fsg_add(struct usb_composite_dev *cdev, struct usb_configuration *c, struct fsg_module_parameters { char *file[FSG_MAX_LUNS]; - int ro[FSG_MAX_LUNS]; - int removable[FSG_MAX_LUNS]; - int cdrom[FSG_MAX_LUNS]; - int nofua[FSG_MAX_LUNS]; + bool ro[FSG_MAX_LUNS]; + bool removable[FSG_MAX_LUNS]; + bool cdrom[FSG_MAX_LUNS]; + bool nofua[FSG_MAX_LUNS]; unsigned int file_count, ro_count, removable_count, cdrom_count; unsigned int nofua_count; unsigned int luns; /* nluns */ - int stall; /* can_stall */ + bool stall; /* can_stall */ }; #define _FSG_MODULE_PARAM_ARRAY(prefix, params, name, type, desc) \ diff --git a/drivers/usb/gadget/fsl_udc_core.c b/drivers/usb/gadget/fsl_udc_core.c index d7ea6c076ce..b04712f19f1 100644 --- a/drivers/usb/gadget/fsl_udc_core.c +++ b/drivers/usb/gadget/fsl_udc_core.c @@ -1430,7 +1430,7 @@ static void setup_received_irq(struct fsl_udc *udc, int pipe = get_pipe_by_windex(wIndex); struct fsl_ep *ep; - if (wValue != 0 || wLength != 0 || pipe > udc->max_ep) + if (wValue != 0 || wLength != 0 || pipe >= udc->max_ep) break; ep = get_ep_by_pipe(udc, pipe); @@ -1673,7 +1673,7 @@ static void dtd_complete_irq(struct fsl_udc *udc) if (!bit_pos) return; - for (i = 0; i < udc->max_ep * 2; i++) { + for (i = 0; i < udc->max_ep; i++) { ep_num = i >> 1; direction = i % 2; diff --git a/drivers/usb/gadget/langwell_udc.c b/drivers/usb/gadget/langwell_udc.c index fa0fcc11263..e2293c1588e 100644 --- a/drivers/usb/gadget/langwell_udc.c +++ b/drivers/usb/gadget/langwell_udc.c @@ -11,11 +11,6 @@ /* #undef DEBUG */ /* #undef VERBOSE_DEBUG */ -#if defined(CONFIG_USB_LANGWELL_OTG) -#define OTG_TRANSCEIVER -#endif - - #include <linux/module.h> #include <linux/pci.h> #include <linux/dma-mapping.h> @@ -1522,8 +1517,7 @@ static void langwell_udc_stop(struct langwell_udc *dev) /* stop all USB activities */ -static void stop_activity(struct langwell_udc *dev, - struct usb_gadget_driver *driver) +static void stop_activity(struct langwell_udc *dev) { struct langwell_ep *ep; dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__); @@ -1535,9 +1529,9 @@ static void stop_activity(struct langwell_udc *dev, } /* report disconnect; the driver is already quiesced */ - if (driver) { + if (dev->driver) { spin_unlock(&dev->lock); - driver->disconnect(&dev->gadget); + dev->driver->disconnect(&dev->gadget); spin_lock(&dev->lock); } @@ -1925,11 +1919,10 @@ static int langwell_stop(struct usb_gadget *g, /* stop all usb activities */ dev->gadget.speed = USB_SPEED_UNKNOWN; - stop_activity(dev, driver); - spin_unlock_irqrestore(&dev->lock, flags); - dev->gadget.dev.driver = NULL; dev->driver = NULL; + stop_activity(dev); + spin_unlock_irqrestore(&dev->lock, flags); device_remove_file(&dev->pdev->dev, &dev_attr_function); @@ -2315,13 +2308,9 @@ static void handle_setup_packet(struct langwell_udc *dev, if (!gadget_is_otg(&dev->gadget)) break; - else if (setup->bRequest == USB_DEVICE_B_HNP_ENABLE) { + else if (setup->bRequest == USB_DEVICE_B_HNP_ENABLE) dev->gadget.b_hnp_enable = 1; -#ifdef OTG_TRANSCEIVER - if (!dev->lotg->otg.default_a) - dev->lotg->hsm.b_hnp_enable = 1; -#endif - } else if (setup->bRequest == USB_DEVICE_A_HNP_SUPPORT) + else if (setup->bRequest == USB_DEVICE_A_HNP_SUPPORT) dev->gadget.a_hnp_support = 1; else if (setup->bRequest == USB_DEVICE_A_ALT_HNP_SUPPORT) @@ -2733,7 +2722,7 @@ static void handle_usb_reset(struct langwell_udc *dev) dev->bus_reset = 1; /* reset all the queues, stop all USB activities */ - stop_activity(dev, dev->driver); + stop_activity(dev); dev->usb_state = USB_STATE_DEFAULT; } else { dev_vdbg(&dev->pdev->dev, "device controller reset\n"); @@ -2741,7 +2730,7 @@ static void handle_usb_reset(struct langwell_udc *dev) langwell_udc_reset(dev); /* reset all the queues, stop all USB activities */ - stop_activity(dev, dev->driver); + stop_activity(dev); /* reset ep0 dQH and endptctrl */ ep0_reset(dev); @@ -2752,12 +2741,6 @@ static void handle_usb_reset(struct langwell_udc *dev) dev->usb_state = USB_STATE_ATTACHED; } -#ifdef OTG_TRANSCEIVER - /* refer to USB OTG 6.6.2.3 b_hnp_en is cleared */ - if (!dev->lotg->otg.default_a) - dev->lotg->hsm.b_hnp_enable = 0; -#endif - dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__); } @@ -2770,29 +2753,6 @@ static void handle_bus_suspend(struct langwell_udc *dev) dev->resume_state = dev->usb_state; dev->usb_state = USB_STATE_SUSPENDED; -#ifdef OTG_TRANSCEIVER - if (dev->lotg->otg.default_a) { - if (dev->lotg->hsm.b_bus_suspend_vld == 1) { - dev->lotg->hsm.b_bus_suspend = 1; - /* notify transceiver the state changes */ - if (spin_trylock(&dev->lotg->wq_lock)) { - langwell_update_transceiver(); - spin_unlock(&dev->lotg->wq_lock); - } - } - dev->lotg->hsm.b_bus_suspend_vld++; - } else { - if (!dev->lotg->hsm.a_bus_suspend) { - dev->lotg->hsm.a_bus_suspend = 1; - /* notify transceiver the state changes */ - if (spin_trylock(&dev->lotg->wq_lock)) { - langwell_update_transceiver(); - spin_unlock(&dev->lotg->wq_lock); - } - } - } -#endif - /* report suspend to the driver */ if (dev->driver) { if (dev->driver->suspend) { @@ -2823,11 +2783,6 @@ static void handle_bus_resume(struct langwell_udc *dev) if (dev->pdev->device != 0x0829) langwell_phy_low_power(dev, 0); -#ifdef OTG_TRANSCEIVER - if (dev->lotg->otg.default_a == 0) - dev->lotg->hsm.a_bus_suspend = 0; -#endif - /* report resume to the driver */ if (dev->driver) { if (dev->driver->resume) { @@ -3020,7 +2975,6 @@ static void langwell_udc_remove(struct pci_dev *pdev) dev->done = &done; -#ifndef OTG_TRANSCEIVER /* free dTD dma_pool and dQH */ if (dev->dtd_pool) dma_pool_destroy(dev->dtd_pool); @@ -3032,7 +2986,6 @@ static void langwell_udc_remove(struct pci_dev *pdev) /* release SRAM caching */ if (dev->has_sram && dev->got_sram) sram_deinit(dev); -#endif if (dev->status_req) { kfree(dev->status_req->req.buf); @@ -3045,7 +2998,6 @@ static void langwell_udc_remove(struct pci_dev *pdev) if (dev->got_irq) free_irq(pdev->irq, dev); -#ifndef OTG_TRANSCEIVER if (dev->cap_regs) iounmap(dev->cap_regs); @@ -3055,13 +3007,6 @@ static void langwell_udc_remove(struct pci_dev *pdev) if (dev->enabled) pci_disable_device(pdev); -#else - if (dev->transceiver) { - otg_put_transceiver(dev->transceiver); - dev->transceiver = NULL; - dev->lotg = NULL; - } -#endif dev->cap_regs = NULL; @@ -3072,9 +3017,7 @@ static void langwell_udc_remove(struct pci_dev *pdev) device_remove_file(&pdev->dev, &dev_attr_langwell_udc); device_remove_file(&pdev->dev, &dev_attr_remote_wakeup); -#ifndef OTG_TRANSCEIVER pci_set_drvdata(pdev, NULL); -#endif /* free dev, wait for the release() finished */ wait_for_completion(&done); @@ -3089,9 +3032,7 @@ static int langwell_udc_probe(struct pci_dev *pdev, const struct pci_device_id *id) { struct langwell_udc *dev; -#ifndef OTG_TRANSCEIVER unsigned long resource, len; -#endif void __iomem *base = NULL; size_t size; int retval; @@ -3109,16 +3050,6 @@ static int langwell_udc_probe(struct pci_dev *pdev, dev->pdev = pdev; dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__); -#ifdef OTG_TRANSCEIVER - /* PCI device is already enabled by otg_transceiver driver */ - dev->enabled = 1; - - /* mem region and register base */ - dev->region = 1; - dev->transceiver = otg_get_transceiver(); - dev->lotg = otg_to_langwell(dev->transceiver); - base = dev->lotg->regs; -#else pci_set_drvdata(pdev, dev); /* now all the pci goodies ... */ @@ -3139,7 +3070,6 @@ static int langwell_udc_probe(struct pci_dev *pdev, dev->region = 1; base = ioremap_nocache(resource, len); -#endif if (base == NULL) { dev_err(&dev->pdev->dev, "can't map memory\n"); retval = -EFAULT; @@ -3163,7 +3093,6 @@ static int langwell_udc_probe(struct pci_dev *pdev, dev->got_sram = 0; dev_vdbg(&dev->pdev->dev, "dev->has_sram: %d\n", dev->has_sram); -#ifndef OTG_TRANSCEIVER /* enable SRAM caching if detected */ if (dev->has_sram && !dev->got_sram) sram_init(dev); @@ -3182,7 +3111,6 @@ static int langwell_udc_probe(struct pci_dev *pdev, goto error; } dev->got_irq = 1; -#endif /* set stopped bit */ dev->stopped = 1; @@ -3257,10 +3185,8 @@ static int langwell_udc_probe(struct pci_dev *pdev, dev->remote_wakeup = 0; dev->dev_status = 1 << USB_DEVICE_SELF_POWERED; -#ifndef OTG_TRANSCEIVER /* reset device controller */ langwell_udc_reset(dev); -#endif /* initialize gadget structure */ dev->gadget.ops = &langwell_ops; /* usb_gadget_ops */ @@ -3268,9 +3194,6 @@ static int langwell_udc_probe(struct pci_dev *pdev, INIT_LIST_HEAD(&dev->gadget.ep_list); /* ep_list */ dev->gadget.speed = USB_SPEED_UNKNOWN; /* speed */ dev->gadget.max_speed = USB_SPEED_HIGH; /* support dual speed */ -#ifdef OTG_TRANSCEIVER - dev->gadget.is_otg = 1; /* support otg mode */ -#endif /* the "gadget" abstracts/virtualizes the controller */ dev_set_name(&dev->gadget.dev, "gadget"); @@ -3282,10 +3205,8 @@ static int langwell_udc_probe(struct pci_dev *pdev, /* controller endpoints reinit */ eps_reinit(dev); -#ifndef OTG_TRANSCEIVER /* reset ep0 dQH and endptctrl */ ep0_reset(dev); -#endif /* create dTD dma_pool resource */ dev->dtd_pool = dma_pool_create("langwell_dtd", @@ -3367,7 +3288,7 @@ static int langwell_udc_suspend(struct pci_dev *pdev, pm_message_t state) spin_lock_irq(&dev->lock); /* stop all usb activities */ - stop_activity(dev, dev->driver); + stop_activity(dev); spin_unlock_irq(&dev->lock); /* free dTD dma_pool and dQH */ @@ -3525,22 +3446,14 @@ static struct pci_driver langwell_pci_driver = { static int __init init(void) { -#ifdef OTG_TRANSCEIVER - return langwell_register_peripheral(&langwell_pci_driver); -#else return pci_register_driver(&langwell_pci_driver); -#endif } module_init(init); static void __exit cleanup(void) { -#ifdef OTG_TRANSCEIVER - return langwell_unregister_peripheral(&langwell_pci_driver); -#else pci_unregister_driver(&langwell_pci_driver); -#endif } module_exit(cleanup); diff --git a/drivers/usb/gadget/langwell_udc.h b/drivers/usb/gadget/langwell_udc.h index ef79e242b7b..d6e78accaff 100644 --- a/drivers/usb/gadget/langwell_udc.h +++ b/drivers/usb/gadget/langwell_udc.h @@ -8,7 +8,6 @@ */ #include <linux/usb/langwell_udc.h> -#include <linux/usb/langwell_otg.h> /*-------------------------------------------------------------------------*/ diff --git a/drivers/usb/gadget/storage_common.c b/drivers/usb/gadget/storage_common.c index c7f291a331d..85ea14e2545 100644 --- a/drivers/usb/gadget/storage_common.c +++ b/drivers/usb/gadget/storage_common.c @@ -598,16 +598,16 @@ static __maybe_unused struct usb_ss_cap_descriptor fsg_ss_cap_desc = { | USB_5GBPS_OPERATION), .bFunctionalitySupport = USB_LOW_SPEED_OPERATION, .bU1devExitLat = USB_DEFAULT_U1_DEV_EXIT_LAT, - .bU2DevExitLat = USB_DEFAULT_U2_DEV_EXIT_LAT, + .bU2DevExitLat = cpu_to_le16(USB_DEFAULT_U2_DEV_EXIT_LAT), }; static __maybe_unused struct usb_bos_descriptor fsg_bos_desc = { .bLength = USB_DT_BOS_SIZE, .bDescriptorType = USB_DT_BOS, - .wTotalLength = USB_DT_BOS_SIZE + .wTotalLength = cpu_to_le16(USB_DT_BOS_SIZE + USB_DT_USB_EXT_CAP_SIZE - + USB_DT_USB_SS_CAP_SIZE, + + USB_DT_USB_SS_CAP_SIZE), .bNumDeviceCaps = 2, }; diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index 91413cac97b..353cdd488b9 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -130,7 +130,7 @@ config USB_FSL_MPH_DR_OF tristate config USB_EHCI_FSL - bool "Support for Freescale on-chip EHCI USB controller" + bool "Support for Freescale PPC on-chip EHCI USB controller" depends on USB_EHCI_HCD && FSL_SOC select USB_EHCI_ROOT_HUB_TT select USB_FSL_MPH_DR_OF if OF @@ -138,7 +138,7 @@ config USB_EHCI_FSL Variation of ARC USB block used in some Freescale chips. config USB_EHCI_MXC - bool "Support for Freescale on-chip EHCI USB controller" + bool "Support for Freescale i.MX on-chip EHCI USB controller" depends on USB_EHCI_HCD && ARCH_MXC select USB_EHCI_ROOT_HUB_TT ---help--- @@ -546,7 +546,7 @@ config USB_RENESAS_USBHS_HCD config USB_WHCI_HCD tristate "Wireless USB Host Controller Interface (WHCI) driver (EXPERIMENTAL)" depends on EXPERIMENTAL - depends on PCI && USB + depends on PCI && USB && UWB select USB_WUSB select UWB_WHCI help @@ -559,7 +559,7 @@ config USB_WHCI_HCD config USB_HWA_HCD tristate "Host Wire Adapter (HWA) driver (EXPERIMENTAL)" depends on EXPERIMENTAL - depends on USB + depends on USB && UWB select USB_WUSB select UWB_HWA help diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c index e90344a1763..c26a82e83f6 100644 --- a/drivers/usb/host/ehci-fsl.c +++ b/drivers/usb/host/ehci-fsl.c @@ -125,7 +125,7 @@ static int usb_hcd_fsl_probe(const struct hc_driver *driver, */ if (pdata->init && pdata->init(pdev)) { retval = -ENODEV; - goto err3; + goto err4; } /* Enable USB controller, 83xx or 8536 */ @@ -239,7 +239,7 @@ static void ehci_fsl_setup_phy(struct ehci_hcd *ehci, ehci_writel(ehci, portsc, &ehci->regs->port_status[port_offset]); } -static void ehci_fsl_usb_setup(struct ehci_hcd *ehci) +static int ehci_fsl_usb_setup(struct ehci_hcd *ehci) { struct usb_hcd *hcd = ehci_to_hcd(ehci); struct fsl_usb2_platform_data *pdata; @@ -299,12 +299,19 @@ static void ehci_fsl_usb_setup(struct ehci_hcd *ehci) #endif out_be32(non_ehci + FSL_SOC_USB_SICTRL, 0x00000001); } + + if (!(in_be32(non_ehci + FSL_SOC_USB_CTRL) & CTRL_PHY_CLK_VALID)) { + printk(KERN_WARNING "fsl-ehci: USB PHY clock invalid\n"); + return -ENODEV; + } + return 0; } /* called after powerup, by probe or system-pm "wakeup" */ static int ehci_fsl_reinit(struct ehci_hcd *ehci) { - ehci_fsl_usb_setup(ehci); + if (ehci_fsl_usb_setup(ehci)) + return -ENODEV; ehci_port_power(ehci, 0); return 0; diff --git a/drivers/usb/host/ehci-fsl.h b/drivers/usb/host/ehci-fsl.h index 49180622116..bdf43e2adc5 100644 --- a/drivers/usb/host/ehci-fsl.h +++ b/drivers/usb/host/ehci-fsl.h @@ -45,5 +45,6 @@ #define FSL_SOC_USB_PRICTRL 0x40c /* NOTE: big-endian */ #define FSL_SOC_USB_SICTRL 0x410 /* NOTE: big-endian */ #define FSL_SOC_USB_CTRL 0x500 /* NOTE: big-endian */ +#define CTRL_PHY_CLK_VALID (1 << 17) #define SNOOP_SIZE_2GB 0x1e #endif /* _EHCI_FSL_H */ diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c index f4b627d343a..01bb7241d6e 100644 --- a/drivers/usb/host/ehci-pci.c +++ b/drivers/usb/host/ehci-pci.c @@ -276,6 +276,9 @@ static int ehci_pci_setup(struct usb_hcd *hcd) /* Serial Bus Release Number is at PCI 0x60 offset */ pci_read_config_byte(pdev, 0x60, &ehci->sbrn); + if (pdev->vendor == PCI_VENDOR_ID_STMICRO + && pdev->device == PCI_DEVICE_ID_STMICRO_USB_HOST) + ehci->sbrn = 0x20; /* ConneXT has no sbrn register */ /* Keep this around for a while just in case some EHCI * implementation uses legacy PCI PM support. This test @@ -526,6 +529,9 @@ static const struct pci_device_id pci_ids [] = { { /* handle any USB 2.0 EHCI controller */ PCI_DEVICE_CLASS(PCI_CLASS_SERIAL_USB_EHCI, ~0), .driver_data = (unsigned long) &ehci_pci_hc_driver, + }, { + PCI_VDEVICE(STMICRO, PCI_DEVICE_ID_STMICRO_USB_HOST), + .driver_data = (unsigned long) &ehci_pci_hc_driver, }, { /* end: all zeroes */ } }; diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c index 5df0b0e3392..77afabc77f9 100644 --- a/drivers/usb/host/ohci-at91.c +++ b/drivers/usb/host/ohci-at91.c @@ -139,8 +139,23 @@ static int usb_hcd_at91_probe(const struct hc_driver *driver, } iclk = clk_get(&pdev->dev, "ohci_clk"); + if (IS_ERR(iclk)) { + dev_err(&pdev->dev, "failed to get ohci_clk\n"); + retval = PTR_ERR(iclk); + goto err3; + } fclk = clk_get(&pdev->dev, "uhpck"); + if (IS_ERR(fclk)) { + dev_err(&pdev->dev, "failed to get uhpck\n"); + retval = PTR_ERR(fclk); + goto err4; + } hclk = clk_get(&pdev->dev, "hclk"); + if (IS_ERR(hclk)) { + dev_err(&pdev->dev, "failed to get hclk\n"); + retval = PTR_ERR(hclk); + goto err5; + } at91_start_hc(pdev); ohci_hcd_init(hcd_to_ohci(hcd)); @@ -153,9 +168,12 @@ static int usb_hcd_at91_probe(const struct hc_driver *driver, at91_stop_hc(pdev); clk_put(hclk); + err5: clk_put(fclk); + err4: clk_put(iclk); + err3: iounmap(hcd->regs); err2: @@ -226,7 +244,8 @@ static void ohci_at91_usb_set_power(struct at91_usbh_data *pdata, int port, int if (!gpio_is_valid(pdata->vbus_pin[port])) return; - gpio_set_value(pdata->vbus_pin[port], !pdata->vbus_pin_inverted ^ enable); + gpio_set_value(pdata->vbus_pin[port], + !pdata->vbus_pin_active_low[port] ^ enable); } static int ohci_at91_usb_get_power(struct at91_usbh_data *pdata, int port) @@ -237,7 +256,8 @@ static int ohci_at91_usb_get_power(struct at91_usbh_data *pdata, int port) if (!gpio_is_valid(pdata->vbus_pin[port])) return -EINVAL; - return gpio_get_value(pdata->vbus_pin[port]) ^ !pdata->vbus_pin_inverted; + return gpio_get_value(pdata->vbus_pin[port]) ^ + !pdata->vbus_pin_active_low[port]; } /* diff --git a/drivers/usb/host/ohci-dbg.c b/drivers/usb/host/ohci-dbg.c index 5179fcd73d8..e4bcb62b930 100644 --- a/drivers/usb/host/ohci-dbg.c +++ b/drivers/usb/host/ohci-dbg.c @@ -82,6 +82,14 @@ urb_print(struct urb * urb, char * str, int small, int status) ohci_dbg(ohci,format, ## arg ); \ } while (0); +/* Version for use where "next" is the address of a local variable */ +#define ohci_dbg_nosw(ohci, next, size, format, arg...) \ + do { \ + unsigned s_len; \ + s_len = scnprintf(*next, *size, format, ## arg); \ + *size -= s_len; *next += s_len; \ + } while (0); + static void ohci_dump_intr_mask ( struct ohci_hcd *ohci, @@ -653,7 +661,7 @@ static ssize_t fill_registers_buffer(struct debug_buffer *buf) /* dump driver info, then registers in spec order */ - ohci_dbg_sw (ohci, &next, &size, + ohci_dbg_nosw(ohci, &next, &size, "bus %s, device %s\n" "%s\n" "%s\n", @@ -672,7 +680,7 @@ static ssize_t fill_registers_buffer(struct debug_buffer *buf) /* hcca */ if (ohci->hcca) - ohci_dbg_sw (ohci, &next, &size, + ohci_dbg_nosw(ohci, &next, &size, "hcca frame 0x%04x\n", ohci_frame_no(ohci)); /* other registers mostly affect frame timings */ diff --git a/drivers/usb/host/ohci-pci.c b/drivers/usb/host/ohci-pci.c index 6109810cc2d..1843bb68ac7 100644 --- a/drivers/usb/host/ohci-pci.c +++ b/drivers/usb/host/ohci-pci.c @@ -397,6 +397,10 @@ static const struct pci_device_id pci_ids [] = { { /* handle any USB OHCI controller */ PCI_DEVICE_CLASS(PCI_CLASS_SERIAL_USB_OHCI, ~0), .driver_data = (unsigned long) &ohci_pci_hc_driver, + }, { + /* The device in the ConneXT I/O hub has no class reg */ + PCI_VDEVICE(STMICRO, PCI_DEVICE_ID_STMICRO_USB_OHCI), + .driver_data = (unsigned long) &ohci_pci_hc_driver, }, { /* end: all zeroes */ } }; MODULE_DEVICE_TABLE (pci, pci_ids); diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c index caf87428ca4..7732d69e49e 100644 --- a/drivers/usb/host/pci-quirks.c +++ b/drivers/usb/host/pci-quirks.c @@ -867,6 +867,22 @@ hc_init: static void __devinit quirk_usb_early_handoff(struct pci_dev *pdev) { + /* Skip Netlogic mips SoC's internal PCI USB controller. + * This device does not need/support EHCI/OHCI handoff + */ + if (pdev->vendor == 0x184e) /* vendor Netlogic */ + return; + if (pdev->class != PCI_CLASS_SERIAL_USB_UHCI && + pdev->class != PCI_CLASS_SERIAL_USB_OHCI && + pdev->class != PCI_CLASS_SERIAL_USB_EHCI && + pdev->class != PCI_CLASS_SERIAL_USB_XHCI) + return; + + if (pci_enable_device(pdev) < 0) { + dev_warn(&pdev->dev, "Can't enable PCI device, " + "BIOS handoff failed.\n"); + return; + } if (pdev->class == PCI_CLASS_SERIAL_USB_UHCI) quirk_usb_handoff_uhci(pdev); else if (pdev->class == PCI_CLASS_SERIAL_USB_OHCI) @@ -875,5 +891,6 @@ static void __devinit quirk_usb_early_handoff(struct pci_dev *pdev) quirk_usb_disable_ehci(pdev); else if (pdev->class == PCI_CLASS_SERIAL_USB_XHCI) quirk_usb_handoff_xhci(pdev); + pci_disable_device(pdev); } DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, quirk_usb_early_handoff); diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c index 35e257f79c7..557b6f32db8 100644 --- a/drivers/usb/host/xhci-hub.c +++ b/drivers/usb/host/xhci-hub.c @@ -93,7 +93,7 @@ static void xhci_usb2_hub_descriptor(struct usb_hcd *hcd, struct xhci_hcd *xhci, */ memset(port_removable, 0, sizeof(port_removable)); for (i = 0; i < ports; i++) { - portsc = xhci_readl(xhci, xhci->usb3_ports[i]); + portsc = xhci_readl(xhci, xhci->usb2_ports[i]); /* If a device is removable, PORTSC reports a 0, same as in the * hub descriptor DeviceRemovable bits. */ diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index 36cbe2226a4..383fc857491 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -1126,26 +1126,42 @@ static unsigned int xhci_parse_exponent_interval(struct usb_device *udev, } /* - * Convert bInterval expressed in frames (in 1-255 range) to exponent of + * Convert bInterval expressed in microframes (in 1-255 range) to exponent of * microframes, rounded down to nearest power of 2. */ -static unsigned int xhci_parse_frame_interval(struct usb_device *udev, - struct usb_host_endpoint *ep) +static unsigned int xhci_microframes_to_exponent(struct usb_device *udev, + struct usb_host_endpoint *ep, unsigned int desc_interval, + unsigned int min_exponent, unsigned int max_exponent) { unsigned int interval; - interval = fls(8 * ep->desc.bInterval) - 1; - interval = clamp_val(interval, 3, 10); - if ((1 << interval) != 8 * ep->desc.bInterval) + interval = fls(desc_interval) - 1; + interval = clamp_val(interval, min_exponent, max_exponent); + if ((1 << interval) != desc_interval) dev_warn(&udev->dev, "ep %#x - rounding interval to %d microframes, ep desc says %d microframes\n", ep->desc.bEndpointAddress, 1 << interval, - 8 * ep->desc.bInterval); + desc_interval); return interval; } +static unsigned int xhci_parse_microframe_interval(struct usb_device *udev, + struct usb_host_endpoint *ep) +{ + return xhci_microframes_to_exponent(udev, ep, + ep->desc.bInterval, 0, 15); +} + + +static unsigned int xhci_parse_frame_interval(struct usb_device *udev, + struct usb_host_endpoint *ep) +{ + return xhci_microframes_to_exponent(udev, ep, + ep->desc.bInterval * 8, 3, 10); +} + /* Return the polling or NAK interval. * * The polling interval is expressed in "microframes". If xHCI's Interval field @@ -1164,7 +1180,7 @@ static unsigned int xhci_get_endpoint_interval(struct usb_device *udev, /* Max NAK rate */ if (usb_endpoint_xfer_control(&ep->desc) || usb_endpoint_xfer_bulk(&ep->desc)) { - interval = ep->desc.bInterval; + interval = xhci_parse_microframe_interval(udev, ep); break; } /* Fall through - SS and HS isoc/int have same decoding */ diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index b90e1386418..b62037bff68 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -1204,6 +1204,7 @@ static void handle_vendor_event(struct xhci_hcd *xhci, * * Returns a zero-based port number, which is suitable for indexing into each of * the split roothubs' port arrays and bus state arrays. + * Add one to it in order to call xhci_find_slot_id_by_port. */ static unsigned int find_faked_portnum_from_hw_portnum(struct usb_hcd *hcd, struct xhci_hcd *xhci, u32 port_id) @@ -1324,7 +1325,7 @@ static void handle_port_status(struct xhci_hcd *xhci, xhci_set_link_state(xhci, port_array, faked_port_index, XDEV_U0); slot_id = xhci_find_slot_id_by_port(hcd, xhci, - faked_port_index); + faked_port_index + 1); if (!slot_id) { xhci_dbg(xhci, "slot_id is zero\n"); goto cleanup; @@ -3323,7 +3324,8 @@ static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags, /* Check TD length */ if (running_total != td_len) { xhci_err(xhci, "ISOC TD length unmatch\n"); - return -EINVAL; + ret = -EINVAL; + goto cleanup; } } diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 6bbe3c3a711..c939f5fdef9 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -352,6 +352,11 @@ static int xhci_try_enable_msi(struct usb_hcd *hcd) /* hcd->irq is -1, we have MSI */ return 0; + if (!pdev->irq) { + xhci_err(xhci, "No msi-x/msi found and no IRQ in BIOS\n"); + return -EINVAL; + } + /* fall back to legacy interrupt*/ ret = request_irq(pdev->irq, &usb_hcd_irq, IRQF_SHARED, hcd->irq_descr, hcd); diff --git a/drivers/usb/misc/emi26.c b/drivers/usb/misc/emi26.c index d9b6a035544..da97dcec1f3 100644 --- a/drivers/usb/misc/emi26.c +++ b/drivers/usb/misc/emi26.c @@ -37,9 +37,6 @@ static int emi26_set_reset(struct usb_device *dev, unsigned char reset_bit); static int emi26_load_firmware (struct usb_device *dev); static int emi26_probe(struct usb_interface *intf, const struct usb_device_id *id); static void emi26_disconnect(struct usb_interface *intf); -static int __init emi26_init (void); -static void __exit emi26_exit (void); - /* thanks to drivers/usb/serial/keyspan_pda.c code */ static int emi26_writememory (struct usb_device *dev, int address, diff --git a/drivers/usb/misc/emi62.c b/drivers/usb/misc/emi62.c index 9f39062ebb0..4e0f167a6c4 100644 --- a/drivers/usb/misc/emi62.c +++ b/drivers/usb/misc/emi62.c @@ -46,9 +46,6 @@ static int emi62_set_reset(struct usb_device *dev, unsigned char reset_bit); static int emi62_load_firmware (struct usb_device *dev); static int emi62_probe(struct usb_interface *intf, const struct usb_device_id *id); static void emi62_disconnect(struct usb_interface *intf); -static int __init emi62_init (void); -static void __exit emi62_exit (void); - /* thanks to drivers/usb/serial/keyspan_pda.c code */ static int emi62_writememory(struct usb_device *dev, int address, diff --git a/drivers/usb/misc/usbsevseg.c b/drivers/usb/misc/usbsevseg.c index 107bf13b1cf..b2d82b93739 100644 --- a/drivers/usb/misc/usbsevseg.c +++ b/drivers/usb/misc/usbsevseg.c @@ -24,7 +24,7 @@ #define VENDOR_ID 0x0fc5 #define PRODUCT_ID 0x1227 -#define MAXLEN 6 +#define MAXLEN 8 /* table of devices that work with this driver */ static const struct usb_device_id id_table[] = { diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c index f9a3f62a83b..7c569f51212 100644 --- a/drivers/usb/musb/davinci.c +++ b/drivers/usb/musb/davinci.c @@ -33,9 +33,6 @@ #include <linux/platform_device.h> #include <linux/dma-mapping.h> -#include <mach/hardware.h> -#include <mach/memory.h> -#include <asm/gpio.h> #include <mach/cputype.h> #include <asm/mach-types.h> diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index 56cf0243979..3d11cf64ebd 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -981,6 +981,9 @@ static void musb_shutdown(struct platform_device *pdev) unsigned long flags; pm_runtime_get_sync(musb->controller); + + musb_gadget_cleanup(musb); + spin_lock_irqsave(&musb->lock, flags); musb_platform_disable(musb); musb_generic_disable(musb); @@ -1827,8 +1830,6 @@ static void musb_free(struct musb *musb) sysfs_remove_group(&musb->controller->kobj, &musb_attr_group); #endif - musb_gadget_cleanup(musb); - if (musb->nIrq >= 0) { if (musb->irq_wake) disable_irq_wake(musb->nIrq); diff --git a/drivers/usb/musb/musb_io.h b/drivers/usb/musb/musb_io.h index e61aa95f2d2..1d5eda26fbd 100644 --- a/drivers/usb/musb/musb_io.h +++ b/drivers/usb/musb/musb_io.h @@ -39,7 +39,8 @@ #if !defined(CONFIG_ARM) && !defined(CONFIG_SUPERH) \ && !defined(CONFIG_AVR32) && !defined(CONFIG_PPC32) \ - && !defined(CONFIG_PPC64) && !defined(CONFIG_BLACKFIN) + && !defined(CONFIG_PPC64) && !defined(CONFIG_BLACKFIN) \ + && !defined(CONFIG_MIPS) static inline void readsl(const void __iomem *addr, void *buf, int len) { insl((unsigned long)addr, buf, len); } static inline void readsw(const void __iomem *addr, void *buf, int len) diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c index c27bbbf32b5..df719eae3b0 100644 --- a/drivers/usb/musb/omap2430.c +++ b/drivers/usb/musb/omap2430.c @@ -222,7 +222,6 @@ static inline void omap2430_low_level_init(struct musb *musb) musb_writel(musb->mregs, OTG_FORCESTDBY, l); } -/* blocking notifier support */ static int musb_otg_notifications(struct notifier_block *nb, unsigned long event, void *unused) { @@ -231,7 +230,7 @@ static int musb_otg_notifications(struct notifier_block *nb, musb->xceiv_event = event; schedule_work(&musb->otg_notifier_work); - return 0; + return NOTIFY_OK; } static void musb_otg_notifier_work(struct work_struct *data_notifier_work) @@ -386,6 +385,7 @@ static void omap2430_musb_disable(struct musb *musb) static int omap2430_musb_exit(struct musb *musb) { del_timer_sync(&musb_idle_timer); + cancel_work_sync(&musb->otg_notifier_work); omap2430_low_level_exit(musb); otg_put_transceiver(musb->xceiv); diff --git a/drivers/usb/otg/Kconfig b/drivers/usb/otg/Kconfig index 2a25955881f..735ef4c2339 100644 --- a/drivers/usb/otg/Kconfig +++ b/drivers/usb/otg/Kconfig @@ -86,20 +86,6 @@ config NOP_USB_XCEIV built-in with usb ip or which are autonomous and doesn't require any phy programming such as ISP1x04 etc. -config USB_LANGWELL_OTG - tristate "Intel Langwell USB OTG dual-role support" - depends on USB && PCI && INTEL_SCU_IPC - select USB_OTG - select USB_OTG_UTILS - help - Say Y here if you want to build Intel Langwell USB OTG - transciever driver in kernel. This driver implements role - switch between EHCI host driver and Langwell USB OTG - client driver. - - To compile this driver as a module, choose M here: the - module will be called langwell_otg. - config USB_MSM_OTG tristate "OTG support for Qualcomm on-chip USB controller" depends on (USB || USB_GADGET) && ARCH_MSM @@ -124,7 +110,7 @@ config AB8500_USB config FSL_USB2_OTG bool "Freescale USB OTG Transceiver Driver" - depends on USB_EHCI_FSL && USB_GADGET_FSL_USB2 + depends on USB_EHCI_FSL && USB_GADGET_FSL_USB2 && USB_SUSPEND select USB_OTG select USB_OTG_UTILS help @@ -132,7 +118,7 @@ config FSL_USB2_OTG config USB_MV_OTG tristate "Marvell USB OTG support" - depends on USB_MV_UDC + depends on USB_EHCI_MV && USB_MV_UDC && USB_SUSPEND select USB_OTG select USB_OTG_UTILS help diff --git a/drivers/usb/otg/Makefile b/drivers/usb/otg/Makefile index b2c5a959863..41aa5098b13 100644 --- a/drivers/usb/otg/Makefile +++ b/drivers/usb/otg/Makefile @@ -13,7 +13,6 @@ obj-$(CONFIG_USB_GPIO_VBUS) += gpio_vbus.o obj-$(CONFIG_ISP1301_OMAP) += isp1301_omap.o obj-$(CONFIG_TWL4030_USB) += twl4030-usb.o obj-$(CONFIG_TWL6030_USB) += twl6030-usb.o -obj-$(CONFIG_USB_LANGWELL_OTG) += langwell_otg.o obj-$(CONFIG_NOP_USB_XCEIV) += nop-usb-xceiv.o obj-$(CONFIG_USB_ULPI) += ulpi.o obj-$(CONFIG_USB_ULPI_VIEWPORT) += ulpi_viewport.o diff --git a/drivers/usb/otg/langwell_otg.c b/drivers/usb/otg/langwell_otg.c deleted file mode 100644 index f08f784086f..00000000000 --- a/drivers/usb/otg/langwell_otg.c +++ /dev/null @@ -1,2347 +0,0 @@ -/* - * Intel Langwell USB OTG transceiver driver - * Copyright (C) 2008 - 2010, Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * - */ -/* This driver helps to switch Langwell OTG controller function between host - * and peripheral. It works with EHCI driver and Langwell client controller - * driver together. - */ -#include <linux/module.h> -#include <linux/init.h> -#include <linux/pci.h> -#include <linux/errno.h> -#include <linux/interrupt.h> -#include <linux/kernel.h> -#include <linux/device.h> -#include <linux/moduleparam.h> -#include <linux/usb/ch9.h> -#include <linux/usb/gadget.h> -#include <linux/usb.h> -#include <linux/usb/otg.h> -#include <linux/usb/hcd.h> -#include <linux/notifier.h> -#include <linux/delay.h> -#include <asm/intel_scu_ipc.h> - -#include <linux/usb/langwell_otg.h> - -#define DRIVER_DESC "Intel Langwell USB OTG transceiver driver" -#define DRIVER_VERSION "July 10, 2010" - -MODULE_DESCRIPTION(DRIVER_DESC); -MODULE_AUTHOR("Henry Yuan <hang.yuan@intel.com>, Hao Wu <hao.wu@intel.com>"); -MODULE_VERSION(DRIVER_VERSION); -MODULE_LICENSE("GPL"); - -static const char driver_name[] = "langwell_otg"; - -static int langwell_otg_probe(struct pci_dev *pdev, - const struct pci_device_id *id); -static void langwell_otg_remove(struct pci_dev *pdev); -static int langwell_otg_suspend(struct pci_dev *pdev, pm_message_t message); -static int langwell_otg_resume(struct pci_dev *pdev); - -static int langwell_otg_set_host(struct otg_transceiver *otg, - struct usb_bus *host); -static int langwell_otg_set_peripheral(struct otg_transceiver *otg, - struct usb_gadget *gadget); -static int langwell_otg_start_srp(struct otg_transceiver *otg); - -static const struct pci_device_id pci_ids[] = {{ - .class = ((PCI_CLASS_SERIAL_USB << 8) | 0xfe), - .class_mask = ~0, - .vendor = 0x8086, - .device = 0x0811, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, -}, { /* end: all zeroes */ } -}; - -static struct pci_driver otg_pci_driver = { - .name = (char *) driver_name, - .id_table = pci_ids, - - .probe = langwell_otg_probe, - .remove = langwell_otg_remove, - - .suspend = langwell_otg_suspend, - .resume = langwell_otg_resume, -}; - -/* HSM timers */ -static inline struct langwell_otg_timer *otg_timer_initializer -(void (*function)(unsigned long), unsigned long expires, unsigned long data) -{ - struct langwell_otg_timer *timer; - timer = kmalloc(sizeof(struct langwell_otg_timer), GFP_KERNEL); - if (timer == NULL) - return timer; - - timer->function = function; - timer->expires = expires; - timer->data = data; - return timer; -} - -static struct langwell_otg_timer *a_wait_vrise_tmr, *a_aidl_bdis_tmr, - *b_se0_srp_tmr, *b_srp_init_tmr; - -static struct list_head active_timers; - -static struct langwell_otg *the_transceiver; - -/* host/client notify transceiver when event affects HNP state */ -void langwell_update_transceiver(void) -{ - struct langwell_otg *lnw = the_transceiver; - - dev_dbg(lnw->dev, "transceiver is updated\n"); - - if (!lnw->qwork) - return ; - - queue_work(lnw->qwork, &lnw->work); -} -EXPORT_SYMBOL(langwell_update_transceiver); - -static int langwell_otg_set_host(struct otg_transceiver *otg, - struct usb_bus *host) -{ - otg->host = host; - - return 0; -} - -static int langwell_otg_set_peripheral(struct otg_transceiver *otg, - struct usb_gadget *gadget) -{ - otg->gadget = gadget; - - return 0; -} - -static int langwell_otg_set_power(struct otg_transceiver *otg, - unsigned mA) -{ - return 0; -} - -/* A-device drives vbus, controlled through IPC commands */ -static int langwell_otg_set_vbus(struct otg_transceiver *otg, bool enabled) -{ - struct langwell_otg *lnw = the_transceiver; - u8 sub_id; - - dev_dbg(lnw->dev, "%s <--- %s\n", __func__, enabled ? "on" : "off"); - - if (enabled) - sub_id = 0x8; /* Turn on the VBus */ - else - sub_id = 0x9; /* Turn off the VBus */ - - if (intel_scu_ipc_simple_command(0xef, sub_id)) { - dev_dbg(lnw->dev, "Failed to set Vbus via IPC commands\n"); - return -EBUSY; - } - - dev_dbg(lnw->dev, "%s --->\n", __func__); - - return 0; -} - -/* charge vbus or discharge vbus through a resistor to ground */ -static void langwell_otg_chrg_vbus(int on) -{ - struct langwell_otg *lnw = the_transceiver; - u32 val; - - val = readl(lnw->iotg.base + CI_OTGSC); - - if (on) - writel((val & ~OTGSC_INTSTS_MASK) | OTGSC_VC, - lnw->iotg.base + CI_OTGSC); - else - writel((val & ~OTGSC_INTSTS_MASK) | OTGSC_VD, - lnw->iotg.base + CI_OTGSC); -} - -/* Start SRP */ -static int langwell_otg_start_srp(struct otg_transceiver *otg) -{ - struct langwell_otg *lnw = the_transceiver; - struct intel_mid_otg_xceiv *iotg = &lnw->iotg; - u32 val; - - dev_dbg(lnw->dev, "%s --->\n", __func__); - - val = readl(iotg->base + CI_OTGSC); - - writel((val & ~OTGSC_INTSTS_MASK) | OTGSC_HADP, - iotg->base + CI_OTGSC); - - /* Check if the data plus is finished or not */ - msleep(8); - val = readl(iotg->base + CI_OTGSC); - if (val & (OTGSC_HADP | OTGSC_DP)) - dev_dbg(lnw->dev, "DataLine SRP Error\n"); - - /* Disable interrupt - b_sess_vld */ - val = readl(iotg->base + CI_OTGSC); - val &= (~(OTGSC_BSVIE | OTGSC_BSEIE)); - writel(val, iotg->base + CI_OTGSC); - - /* Start VBus SRP, drive vbus to generate VBus pulse */ - iotg->otg.set_vbus(&iotg->otg, true); - msleep(15); - iotg->otg.set_vbus(&iotg->otg, false); - - /* Enable interrupt - b_sess_vld*/ - val = readl(iotg->base + CI_OTGSC); - dev_dbg(lnw->dev, "after VBUS pulse otgsc = %x\n", val); - - val |= (OTGSC_BSVIE | OTGSC_BSEIE); - writel(val, iotg->base + CI_OTGSC); - - /* If Vbus is valid, then update the hsm */ - if (val & OTGSC_BSV) { - dev_dbg(lnw->dev, "no b_sess_vld interrupt\n"); - - lnw->iotg.hsm.b_sess_vld = 1; - langwell_update_transceiver(); - } - - dev_dbg(lnw->dev, "%s <---\n", __func__); - return 0; -} - -/* stop SOF via bus_suspend */ -static void langwell_otg_loc_sof(int on) -{ - struct langwell_otg *lnw = the_transceiver; - struct usb_hcd *hcd; - int err; - - dev_dbg(lnw->dev, "%s ---> %s\n", __func__, on ? "suspend" : "resume"); - - hcd = bus_to_hcd(lnw->iotg.otg.host); - if (on) - err = hcd->driver->bus_resume(hcd); - else - err = hcd->driver->bus_suspend(hcd); - - if (err) - dev_dbg(lnw->dev, "Fail to resume/suspend USB bus - %d\n", err); - - dev_dbg(lnw->dev, "%s <---\n", __func__); -} - -static int langwell_otg_check_otgsc(void) -{ - struct langwell_otg *lnw = the_transceiver; - u32 otgsc, usbcfg; - - dev_dbg(lnw->dev, "check sync OTGSC and USBCFG registers\n"); - - otgsc = readl(lnw->iotg.base + CI_OTGSC); - usbcfg = readl(lnw->usbcfg); - - dev_dbg(lnw->dev, "OTGSC = %08x, USBCFG = %08x\n", - otgsc, usbcfg); - dev_dbg(lnw->dev, "OTGSC_AVV = %d\n", !!(otgsc & OTGSC_AVV)); - dev_dbg(lnw->dev, "USBCFG.VBUSVAL = %d\n", - !!(usbcfg & USBCFG_VBUSVAL)); - dev_dbg(lnw->dev, "OTGSC_ASV = %d\n", !!(otgsc & OTGSC_ASV)); - dev_dbg(lnw->dev, "USBCFG.AVALID = %d\n", - !!(usbcfg & USBCFG_AVALID)); - dev_dbg(lnw->dev, "OTGSC_BSV = %d\n", !!(otgsc & OTGSC_BSV)); - dev_dbg(lnw->dev, "USBCFG.BVALID = %d\n", - !!(usbcfg & USBCFG_BVALID)); - dev_dbg(lnw->dev, "OTGSC_BSE = %d\n", !!(otgsc & OTGSC_BSE)); - dev_dbg(lnw->dev, "USBCFG.SESEND = %d\n", - !!(usbcfg & USBCFG_SESEND)); - - /* Check USBCFG VBusValid/AValid/BValid/SessEnd */ - if (!!(otgsc & OTGSC_AVV) ^ !!(usbcfg & USBCFG_VBUSVAL)) { - dev_dbg(lnw->dev, "OTGSC.AVV != USBCFG.VBUSVAL\n"); - goto err; - } - if (!!(otgsc & OTGSC_ASV) ^ !!(usbcfg & USBCFG_AVALID)) { - dev_dbg(lnw->dev, "OTGSC.ASV != USBCFG.AVALID\n"); - goto err; - } - if (!!(otgsc & OTGSC_BSV) ^ !!(usbcfg & USBCFG_BVALID)) { - dev_dbg(lnw->dev, "OTGSC.BSV != USBCFG.BVALID\n"); - goto err; - } - if (!!(otgsc & OTGSC_BSE) ^ !!(usbcfg & USBCFG_SESEND)) { - dev_dbg(lnw->dev, "OTGSC.BSE != USBCFG.SESSEN\n"); - goto err; - } - - dev_dbg(lnw->dev, "OTGSC and USBCFG are synced\n"); - - return 0; - -err: - dev_warn(lnw->dev, "OTGSC isn't equal to USBCFG\n"); - return -EPIPE; -} - - -static void langwell_otg_phy_low_power(int on) -{ - struct langwell_otg *lnw = the_transceiver; - struct intel_mid_otg_xceiv *iotg = &lnw->iotg; - u8 val, phcd; - int retval; - - dev_dbg(lnw->dev, "%s ---> %s mode\n", - __func__, on ? "Low power" : "Normal"); - - phcd = 0x40; - - val = readb(iotg->base + CI_HOSTPC1 + 2); - - if (on) { - /* Due to hardware issue, after set PHCD, sync will failed - * between USBCFG and OTGSC, so before set PHCD, check if - * sync is in process now. If the answer is "yes", then do - * not touch PHCD bit */ - retval = langwell_otg_check_otgsc(); - if (retval) { - dev_dbg(lnw->dev, "Skip PHCD programming..\n"); - return ; - } - - writeb(val | phcd, iotg->base + CI_HOSTPC1 + 2); - } else - writeb(val & ~phcd, iotg->base + CI_HOSTPC1 + 2); - - dev_dbg(lnw->dev, "%s <--- done\n", __func__); -} - -/* After drv vbus, add 5 ms delay to set PHCD */ -static void langwell_otg_phy_low_power_wait(int on) -{ - struct langwell_otg *lnw = the_transceiver; - - dev_dbg(lnw->dev, "add 5ms delay before programing PHCD\n"); - - mdelay(5); - langwell_otg_phy_low_power(on); -} - -/* Enable/Disable OTG interrupt */ -static void langwell_otg_intr(int on) -{ - struct langwell_otg *lnw = the_transceiver; - struct intel_mid_otg_xceiv *iotg = &lnw->iotg; - u32 val; - - dev_dbg(lnw->dev, "%s ---> %s\n", __func__, on ? "on" : "off"); - - val = readl(iotg->base + CI_OTGSC); - - /* OTGSC_INT_MASK doesn't contains 1msInt */ - if (on) { - val = val | (OTGSC_INT_MASK); - writel(val, iotg->base + CI_OTGSC); - } else { - val = val & ~(OTGSC_INT_MASK); - writel(val, iotg->base + CI_OTGSC); - } - - dev_dbg(lnw->dev, "%s <---\n", __func__); -} - -/* set HAAR: Hardware Assist Auto-Reset */ -static void langwell_otg_HAAR(int on) -{ - struct langwell_otg *lnw = the_transceiver; - struct intel_mid_otg_xceiv *iotg = &lnw->iotg; - u32 val; - - dev_dbg(lnw->dev, "%s ---> %s\n", __func__, on ? "on" : "off"); - - val = readl(iotg->base + CI_OTGSC); - if (on) - writel((val & ~OTGSC_INTSTS_MASK) | OTGSC_HAAR, - iotg->base + CI_OTGSC); - else - writel((val & ~OTGSC_INTSTS_MASK) & ~OTGSC_HAAR, - iotg->base + CI_OTGSC); - - dev_dbg(lnw->dev, "%s <---\n", __func__); -} - -/* set HABA: Hardware Assist B-Disconnect to A-Connect */ -static void langwell_otg_HABA(int on) -{ - struct langwell_otg *lnw = the_transceiver; - struct intel_mid_otg_xceiv *iotg = &lnw->iotg; - u32 val; - - dev_dbg(lnw->dev, "%s ---> %s\n", __func__, on ? "on" : "off"); - - val = readl(iotg->base + CI_OTGSC); - if (on) - writel((val & ~OTGSC_INTSTS_MASK) | OTGSC_HABA, - iotg->base + CI_OTGSC); - else - writel((val & ~OTGSC_INTSTS_MASK) & ~OTGSC_HABA, - iotg->base + CI_OTGSC); - - dev_dbg(lnw->dev, "%s <---\n", __func__); -} - -static int langwell_otg_check_se0_srp(int on) -{ - struct langwell_otg *lnw = the_transceiver; - int delay_time = TB_SE0_SRP * 10; - u32 val; - - dev_dbg(lnw->dev, "%s --->\n", __func__); - - do { - udelay(100); - if (!delay_time--) - break; - val = readl(lnw->iotg.base + CI_PORTSC1); - val &= PORTSC_LS; - } while (!val); - - dev_dbg(lnw->dev, "%s <---\n", __func__); - return val; -} - -/* The timeout callback function to set time out bit */ -static void set_tmout(unsigned long indicator) -{ - *(int *)indicator = 1; -} - -void langwell_otg_nsf_msg(unsigned long indicator) -{ - struct langwell_otg *lnw = the_transceiver; - - switch (indicator) { - case 2: - case 4: - case 6: - case 7: - dev_warn(lnw->dev, - "OTG:NSF-%lu - deivce not responding\n", indicator); - break; - case 3: - dev_warn(lnw->dev, - "OTG:NSF-%lu - deivce not supported\n", indicator); - break; - default: - dev_warn(lnw->dev, "Do not have this kind of NSF\n"); - break; - } -} - -/* Initialize timers */ -static int langwell_otg_init_timers(struct otg_hsm *hsm) -{ - /* HSM used timers */ - a_wait_vrise_tmr = otg_timer_initializer(&set_tmout, TA_WAIT_VRISE, - (unsigned long)&hsm->a_wait_vrise_tmout); - if (a_wait_vrise_tmr == NULL) - return -ENOMEM; - a_aidl_bdis_tmr = otg_timer_initializer(&set_tmout, TA_AIDL_BDIS, - (unsigned long)&hsm->a_aidl_bdis_tmout); - if (a_aidl_bdis_tmr == NULL) - return -ENOMEM; - b_se0_srp_tmr = otg_timer_initializer(&set_tmout, TB_SE0_SRP, - (unsigned long)&hsm->b_se0_srp); - if (b_se0_srp_tmr == NULL) - return -ENOMEM; - b_srp_init_tmr = otg_timer_initializer(&set_tmout, TB_SRP_INIT, - (unsigned long)&hsm->b_srp_init_tmout); - if (b_srp_init_tmr == NULL) - return -ENOMEM; - - return 0; -} - -/* Free timers */ -static void langwell_otg_free_timers(void) -{ - kfree(a_wait_vrise_tmr); - kfree(a_aidl_bdis_tmr); - kfree(b_se0_srp_tmr); - kfree(b_srp_init_tmr); -} - -/* The timeout callback function to set time out bit */ -static void langwell_otg_timer_fn(unsigned long indicator) -{ - struct langwell_otg *lnw = the_transceiver; - - *(int *)indicator = 1; - - dev_dbg(lnw->dev, "kernel timer - timeout\n"); - - langwell_update_transceiver(); -} - -/* kernel timer used instead of HW based interrupt */ -static void langwell_otg_add_ktimer(enum langwell_otg_timer_type timers) -{ - struct langwell_otg *lnw = the_transceiver; - struct intel_mid_otg_xceiv *iotg = &lnw->iotg; - unsigned long j = jiffies; - unsigned long data, time; - - switch (timers) { - case TA_WAIT_VRISE_TMR: - iotg->hsm.a_wait_vrise_tmout = 0; - data = (unsigned long)&iotg->hsm.a_wait_vrise_tmout; - time = TA_WAIT_VRISE; - break; - case TA_WAIT_BCON_TMR: - iotg->hsm.a_wait_bcon_tmout = 0; - data = (unsigned long)&iotg->hsm.a_wait_bcon_tmout; - time = TA_WAIT_BCON; - break; - case TA_AIDL_BDIS_TMR: - iotg->hsm.a_aidl_bdis_tmout = 0; - data = (unsigned long)&iotg->hsm.a_aidl_bdis_tmout; - time = TA_AIDL_BDIS; - break; - case TB_ASE0_BRST_TMR: - iotg->hsm.b_ase0_brst_tmout = 0; - data = (unsigned long)&iotg->hsm.b_ase0_brst_tmout; - time = TB_ASE0_BRST; - break; - case TB_SRP_INIT_TMR: - iotg->hsm.b_srp_init_tmout = 0; - data = (unsigned long)&iotg->hsm.b_srp_init_tmout; - time = TB_SRP_INIT; - break; - case TB_SRP_FAIL_TMR: - iotg->hsm.b_srp_fail_tmout = 0; - data = (unsigned long)&iotg->hsm.b_srp_fail_tmout; - time = TB_SRP_FAIL; - break; - case TB_BUS_SUSPEND_TMR: - iotg->hsm.b_bus_suspend_tmout = 0; - data = (unsigned long)&iotg->hsm.b_bus_suspend_tmout; - time = TB_BUS_SUSPEND; - break; - default: - dev_dbg(lnw->dev, "unknown timer, cannot enable it\n"); - return; - } - - lnw->hsm_timer.data = data; - lnw->hsm_timer.function = langwell_otg_timer_fn; - lnw->hsm_timer.expires = j + time * HZ / 1000; /* milliseconds */ - - add_timer(&lnw->hsm_timer); - - dev_dbg(lnw->dev, "add timer successfully\n"); -} - -/* Add timer to timer list */ -static void langwell_otg_add_timer(void *gtimer) -{ - struct langwell_otg_timer *timer = (struct langwell_otg_timer *)gtimer; - struct langwell_otg_timer *tmp_timer; - struct intel_mid_otg_xceiv *iotg = &the_transceiver->iotg; - u32 val32; - - /* Check if the timer is already in the active list, - * if so update timer count - */ - list_for_each_entry(tmp_timer, &active_timers, list) - if (tmp_timer == timer) { - timer->count = timer->expires; - return; - } - timer->count = timer->expires; - - if (list_empty(&active_timers)) { - val32 = readl(iotg->base + CI_OTGSC); - writel(val32 | OTGSC_1MSE, iotg->base + CI_OTGSC); - } - - list_add_tail(&timer->list, &active_timers); -} - -/* Remove timer from the timer list; clear timeout status */ -static void langwell_otg_del_timer(void *gtimer) -{ - struct langwell_otg *lnw = the_transceiver; - struct langwell_otg_timer *timer = (struct langwell_otg_timer *)gtimer; - struct langwell_otg_timer *tmp_timer, *del_tmp; - u32 val32; - - list_for_each_entry_safe(tmp_timer, del_tmp, &active_timers, list) - if (tmp_timer == timer) - list_del(&timer->list); - - if (list_empty(&active_timers)) { - val32 = readl(lnw->iotg.base + CI_OTGSC); - writel(val32 & ~OTGSC_1MSE, lnw->iotg.base + CI_OTGSC); - } -} - -/* Reduce timer count by 1, and find timeout conditions.*/ -static int langwell_otg_tick_timer(u32 *int_sts) -{ - struct langwell_otg *lnw = the_transceiver; - struct langwell_otg_timer *tmp_timer, *del_tmp; - int expired = 0; - - list_for_each_entry_safe(tmp_timer, del_tmp, &active_timers, list) { - tmp_timer->count--; - /* check if timer expires */ - if (!tmp_timer->count) { - list_del(&tmp_timer->list); - tmp_timer->function(tmp_timer->data); - expired = 1; - } - } - - if (list_empty(&active_timers)) { - dev_dbg(lnw->dev, "tick timer: disable 1ms int\n"); - *int_sts = *int_sts & ~OTGSC_1MSE; - } - return expired; -} - -static void reset_otg(void) -{ - struct langwell_otg *lnw = the_transceiver; - int delay_time = 1000; - u32 val; - - dev_dbg(lnw->dev, "reseting OTG controller ...\n"); - val = readl(lnw->iotg.base + CI_USBCMD); - writel(val | USBCMD_RST, lnw->iotg.base + CI_USBCMD); - do { - udelay(100); - if (!delay_time--) - dev_dbg(lnw->dev, "reset timeout\n"); - val = readl(lnw->iotg.base + CI_USBCMD); - val &= USBCMD_RST; - } while (val != 0); - dev_dbg(lnw->dev, "reset done.\n"); -} - -static void set_host_mode(void) -{ - struct langwell_otg *lnw = the_transceiver; - u32 val; - - reset_otg(); - val = readl(lnw->iotg.base + CI_USBMODE); - val = (val & (~USBMODE_CM)) | USBMODE_HOST; - writel(val, lnw->iotg.base + CI_USBMODE); -} - -static void set_client_mode(void) -{ - struct langwell_otg *lnw = the_transceiver; - u32 val; - - reset_otg(); - val = readl(lnw->iotg.base + CI_USBMODE); - val = (val & (~USBMODE_CM)) | USBMODE_DEVICE; - writel(val, lnw->iotg.base + CI_USBMODE); -} - -static void init_hsm(void) -{ - struct langwell_otg *lnw = the_transceiver; - struct intel_mid_otg_xceiv *iotg = &lnw->iotg; - u32 val32; - - /* read OTGSC after reset */ - val32 = readl(lnw->iotg.base + CI_OTGSC); - dev_dbg(lnw->dev, "%s: OTGSC init value = 0x%x\n", __func__, val32); - - /* set init state */ - if (val32 & OTGSC_ID) { - iotg->hsm.id = 1; - iotg->otg.default_a = 0; - set_client_mode(); - iotg->otg.state = OTG_STATE_B_IDLE; - } else { - iotg->hsm.id = 0; - iotg->otg.default_a = 1; - set_host_mode(); - iotg->otg.state = OTG_STATE_A_IDLE; - } - - /* set session indicator */ - if (val32 & OTGSC_BSE) - iotg->hsm.b_sess_end = 1; - if (val32 & OTGSC_BSV) - iotg->hsm.b_sess_vld = 1; - if (val32 & OTGSC_ASV) - iotg->hsm.a_sess_vld = 1; - if (val32 & OTGSC_AVV) - iotg->hsm.a_vbus_vld = 1; - - /* defautly power the bus */ - iotg->hsm.a_bus_req = 1; - iotg->hsm.a_bus_drop = 0; - /* defautly don't request bus as B device */ - iotg->hsm.b_bus_req = 0; - /* no system error */ - iotg->hsm.a_clr_err = 0; - - langwell_otg_phy_low_power_wait(1); -} - -static void update_hsm(void) -{ - struct langwell_otg *lnw = the_transceiver; - struct intel_mid_otg_xceiv *iotg = &lnw->iotg; - u32 val32; - - /* read OTGSC */ - val32 = readl(lnw->iotg.base + CI_OTGSC); - dev_dbg(lnw->dev, "%s: OTGSC value = 0x%x\n", __func__, val32); - - iotg->hsm.id = !!(val32 & OTGSC_ID); - iotg->hsm.b_sess_end = !!(val32 & OTGSC_BSE); - iotg->hsm.b_sess_vld = !!(val32 & OTGSC_BSV); - iotg->hsm.a_sess_vld = !!(val32 & OTGSC_ASV); - iotg->hsm.a_vbus_vld = !!(val32 & OTGSC_AVV); -} - -static irqreturn_t otg_dummy_irq(int irq, void *_dev) -{ - struct langwell_otg *lnw = the_transceiver; - void __iomem *reg_base = _dev; - u32 val; - u32 int_mask = 0; - - val = readl(reg_base + CI_USBMODE); - if ((val & USBMODE_CM) != USBMODE_DEVICE) - return IRQ_NONE; - - val = readl(reg_base + CI_USBSTS); - int_mask = val & INTR_DUMMY_MASK; - - if (int_mask == 0) - return IRQ_NONE; - - /* clear hsm.b_conn here since host driver can't detect it - * otg_dummy_irq called means B-disconnect happened. - */ - if (lnw->iotg.hsm.b_conn) { - lnw->iotg.hsm.b_conn = 0; - if (spin_trylock(&lnw->wq_lock)) { - langwell_update_transceiver(); - spin_unlock(&lnw->wq_lock); - } - } - - /* Clear interrupts */ - writel(int_mask, reg_base + CI_USBSTS); - return IRQ_HANDLED; -} - -static irqreturn_t otg_irq(int irq, void *_dev) -{ - struct langwell_otg *lnw = _dev; - struct intel_mid_otg_xceiv *iotg = &lnw->iotg; - u32 int_sts, int_en; - u32 int_mask = 0; - int flag = 0; - - int_sts = readl(lnw->iotg.base + CI_OTGSC); - int_en = (int_sts & OTGSC_INTEN_MASK) >> 8; - int_mask = int_sts & int_en; - if (int_mask == 0) - return IRQ_NONE; - - if (int_mask & OTGSC_IDIS) { - dev_dbg(lnw->dev, "%s: id change int\n", __func__); - iotg->hsm.id = (int_sts & OTGSC_ID) ? 1 : 0; - dev_dbg(lnw->dev, "id = %d\n", iotg->hsm.id); - flag = 1; - } - if (int_mask & OTGSC_DPIS) { - dev_dbg(lnw->dev, "%s: data pulse int\n", __func__); - iotg->hsm.a_srp_det = (int_sts & OTGSC_DPS) ? 1 : 0; - dev_dbg(lnw->dev, "data pulse = %d\n", iotg->hsm.a_srp_det); - flag = 1; - } - if (int_mask & OTGSC_BSEIS) { - dev_dbg(lnw->dev, "%s: b session end int\n", __func__); - iotg->hsm.b_sess_end = (int_sts & OTGSC_BSE) ? 1 : 0; - dev_dbg(lnw->dev, "b_sess_end = %d\n", iotg->hsm.b_sess_end); - flag = 1; - } - if (int_mask & OTGSC_BSVIS) { - dev_dbg(lnw->dev, "%s: b session valid int\n", __func__); - iotg->hsm.b_sess_vld = (int_sts & OTGSC_BSV) ? 1 : 0; - dev_dbg(lnw->dev, "b_sess_vld = %d\n", iotg->hsm.b_sess_end); - flag = 1; - } - if (int_mask & OTGSC_ASVIS) { - dev_dbg(lnw->dev, "%s: a session valid int\n", __func__); - iotg->hsm.a_sess_vld = (int_sts & OTGSC_ASV) ? 1 : 0; - dev_dbg(lnw->dev, "a_sess_vld = %d\n", iotg->hsm.a_sess_vld); - flag = 1; - } - if (int_mask & OTGSC_AVVIS) { - dev_dbg(lnw->dev, "%s: a vbus valid int\n", __func__); - iotg->hsm.a_vbus_vld = (int_sts & OTGSC_AVV) ? 1 : 0; - dev_dbg(lnw->dev, "a_vbus_vld = %d\n", iotg->hsm.a_vbus_vld); - flag = 1; - } - - if (int_mask & OTGSC_1MSS) { - /* need to schedule otg_work if any timer is expired */ - if (langwell_otg_tick_timer(&int_sts)) - flag = 1; - } - - writel((int_sts & ~OTGSC_INTSTS_MASK) | int_mask, - lnw->iotg.base + CI_OTGSC); - if (flag) - langwell_update_transceiver(); - - return IRQ_HANDLED; -} - -static int langwell_otg_iotg_notify(struct notifier_block *nb, - unsigned long action, void *data) -{ - struct langwell_otg *lnw = the_transceiver; - struct intel_mid_otg_xceiv *iotg = data; - int flag = 0; - - if (iotg == NULL) - return NOTIFY_BAD; - - if (lnw == NULL) - return NOTIFY_BAD; - - switch (action) { - case MID_OTG_NOTIFY_CONNECT: - dev_dbg(lnw->dev, "Lnw OTG Notify Connect Event\n"); - if (iotg->otg.default_a == 1) - iotg->hsm.b_conn = 1; - else - iotg->hsm.a_conn = 1; - flag = 1; - break; - case MID_OTG_NOTIFY_DISCONN: - dev_dbg(lnw->dev, "Lnw OTG Notify Disconnect Event\n"); - if (iotg->otg.default_a == 1) - iotg->hsm.b_conn = 0; - else - iotg->hsm.a_conn = 0; - flag = 1; - break; - case MID_OTG_NOTIFY_HSUSPEND: - dev_dbg(lnw->dev, "Lnw OTG Notify Host Bus suspend Event\n"); - if (iotg->otg.default_a == 1) - iotg->hsm.a_suspend_req = 1; - else - iotg->hsm.b_bus_req = 0; - flag = 1; - break; - case MID_OTG_NOTIFY_HRESUME: - dev_dbg(lnw->dev, "Lnw OTG Notify Host Bus resume Event\n"); - if (iotg->otg.default_a == 1) - iotg->hsm.b_bus_resume = 1; - flag = 1; - break; - case MID_OTG_NOTIFY_CSUSPEND: - dev_dbg(lnw->dev, "Lnw OTG Notify Client Bus suspend Event\n"); - if (iotg->otg.default_a == 1) { - if (iotg->hsm.b_bus_suspend_vld == 2) { - iotg->hsm.b_bus_suspend = 1; - iotg->hsm.b_bus_suspend_vld = 0; - flag = 1; - } else { - iotg->hsm.b_bus_suspend_vld++; - flag = 0; - } - } else { - if (iotg->hsm.a_bus_suspend == 0) { - iotg->hsm.a_bus_suspend = 1; - flag = 1; - } - } - break; - case MID_OTG_NOTIFY_CRESUME: - dev_dbg(lnw->dev, "Lnw OTG Notify Client Bus resume Event\n"); - if (iotg->otg.default_a == 0) - iotg->hsm.a_bus_suspend = 0; - flag = 0; - break; - case MID_OTG_NOTIFY_HOSTADD: - dev_dbg(lnw->dev, "Lnw OTG Nofity Host Driver Add\n"); - flag = 1; - break; - case MID_OTG_NOTIFY_HOSTREMOVE: - dev_dbg(lnw->dev, "Lnw OTG Nofity Host Driver remove\n"); - flag = 1; - break; - case MID_OTG_NOTIFY_CLIENTADD: - dev_dbg(lnw->dev, "Lnw OTG Nofity Client Driver Add\n"); - flag = 1; - break; - case MID_OTG_NOTIFY_CLIENTREMOVE: - dev_dbg(lnw->dev, "Lnw OTG Nofity Client Driver remove\n"); - flag = 1; - break; - default: - dev_dbg(lnw->dev, "Lnw OTG Nofity unknown notify message\n"); - return NOTIFY_DONE; - } - - if (flag) - langwell_update_transceiver(); - - return NOTIFY_OK; -} - -static void langwell_otg_work(struct work_struct *work) -{ - struct langwell_otg *lnw; - struct intel_mid_otg_xceiv *iotg; - int retval; - struct pci_dev *pdev; - - lnw = container_of(work, struct langwell_otg, work); - iotg = &lnw->iotg; - pdev = to_pci_dev(lnw->dev); - - dev_dbg(lnw->dev, "%s: old state = %s\n", __func__, - otg_state_string(iotg->otg.state)); - - switch (iotg->otg.state) { - case OTG_STATE_UNDEFINED: - case OTG_STATE_B_IDLE: - if (!iotg->hsm.id) { - langwell_otg_del_timer(b_srp_init_tmr); - del_timer_sync(&lnw->hsm_timer); - - iotg->otg.default_a = 1; - iotg->hsm.a_srp_det = 0; - - langwell_otg_chrg_vbus(0); - set_host_mode(); - langwell_otg_phy_low_power(1); - - iotg->otg.state = OTG_STATE_A_IDLE; - langwell_update_transceiver(); - } else if (iotg->hsm.b_sess_vld) { - langwell_otg_del_timer(b_srp_init_tmr); - del_timer_sync(&lnw->hsm_timer); - iotg->hsm.b_sess_end = 0; - iotg->hsm.a_bus_suspend = 0; - langwell_otg_chrg_vbus(0); - - if (lnw->iotg.start_peripheral) { - lnw->iotg.start_peripheral(&lnw->iotg); - iotg->otg.state = OTG_STATE_B_PERIPHERAL; - } else - dev_dbg(lnw->dev, "client driver not loaded\n"); - - } else if (iotg->hsm.b_srp_init_tmout) { - iotg->hsm.b_srp_init_tmout = 0; - dev_warn(lnw->dev, "SRP init timeout\n"); - } else if (iotg->hsm.b_srp_fail_tmout) { - iotg->hsm.b_srp_fail_tmout = 0; - iotg->hsm.b_bus_req = 0; - - /* No silence failure */ - langwell_otg_nsf_msg(6); - } else if (iotg->hsm.b_bus_req && iotg->hsm.b_sess_end) { - del_timer_sync(&lnw->hsm_timer); - /* workaround for b_se0_srp detection */ - retval = langwell_otg_check_se0_srp(0); - if (retval) { - iotg->hsm.b_bus_req = 0; - dev_dbg(lnw->dev, "LS isn't SE0, try later\n"); - } else { - /* clear the PHCD before start srp */ - langwell_otg_phy_low_power(0); - - /* Start SRP */ - langwell_otg_add_timer(b_srp_init_tmr); - iotg->otg.start_srp(&iotg->otg); - langwell_otg_del_timer(b_srp_init_tmr); - langwell_otg_add_ktimer(TB_SRP_FAIL_TMR); - - /* reset PHY low power mode here */ - langwell_otg_phy_low_power_wait(1); - } - } - break; - case OTG_STATE_B_SRP_INIT: - if (!iotg->hsm.id) { - iotg->otg.default_a = 1; - iotg->hsm.a_srp_det = 0; - - /* Turn off VBus */ - iotg->otg.set_vbus(&iotg->otg, false); - langwell_otg_chrg_vbus(0); - set_host_mode(); - langwell_otg_phy_low_power(1); - iotg->otg.state = OTG_STATE_A_IDLE; - langwell_update_transceiver(); - } else if (iotg->hsm.b_sess_vld) { - langwell_otg_chrg_vbus(0); - if (lnw->iotg.start_peripheral) { - lnw->iotg.start_peripheral(&lnw->iotg); - iotg->otg.state = OTG_STATE_B_PERIPHERAL; - } else - dev_dbg(lnw->dev, "client driver not loaded\n"); - } - break; - case OTG_STATE_B_PERIPHERAL: - if (!iotg->hsm.id) { - iotg->otg.default_a = 1; - iotg->hsm.a_srp_det = 0; - - langwell_otg_chrg_vbus(0); - - if (lnw->iotg.stop_peripheral) - lnw->iotg.stop_peripheral(&lnw->iotg); - else - dev_dbg(lnw->dev, - "client driver has been removed.\n"); - - set_host_mode(); - langwell_otg_phy_low_power(1); - iotg->otg.state = OTG_STATE_A_IDLE; - langwell_update_transceiver(); - } else if (!iotg->hsm.b_sess_vld) { - iotg->hsm.b_hnp_enable = 0; - - if (lnw->iotg.stop_peripheral) - lnw->iotg.stop_peripheral(&lnw->iotg); - else - dev_dbg(lnw->dev, - "client driver has been removed.\n"); - - iotg->otg.state = OTG_STATE_B_IDLE; - } else if (iotg->hsm.b_bus_req && iotg->otg.gadget && - iotg->otg.gadget->b_hnp_enable && - iotg->hsm.a_bus_suspend) { - - if (lnw->iotg.stop_peripheral) - lnw->iotg.stop_peripheral(&lnw->iotg); - else - dev_dbg(lnw->dev, - "client driver has been removed.\n"); - - langwell_otg_HAAR(1); - iotg->hsm.a_conn = 0; - - if (lnw->iotg.start_host) { - lnw->iotg.start_host(&lnw->iotg); - iotg->otg.state = OTG_STATE_B_WAIT_ACON; - } else - dev_dbg(lnw->dev, - "host driver not loaded.\n"); - - iotg->hsm.a_bus_resume = 0; - langwell_otg_add_ktimer(TB_ASE0_BRST_TMR); - } - break; - - case OTG_STATE_B_WAIT_ACON: - if (!iotg->hsm.id) { - /* delete hsm timer for b_ase0_brst_tmr */ - del_timer_sync(&lnw->hsm_timer); - - iotg->otg.default_a = 1; - iotg->hsm.a_srp_det = 0; - - langwell_otg_chrg_vbus(0); - - langwell_otg_HAAR(0); - if (lnw->iotg.stop_host) - lnw->iotg.stop_host(&lnw->iotg); - else - dev_dbg(lnw->dev, - "host driver has been removed.\n"); - - set_host_mode(); - langwell_otg_phy_low_power(1); - iotg->otg.state = OTG_STATE_A_IDLE; - langwell_update_transceiver(); - } else if (!iotg->hsm.b_sess_vld) { - /* delete hsm timer for b_ase0_brst_tmr */ - del_timer_sync(&lnw->hsm_timer); - - iotg->hsm.b_hnp_enable = 0; - iotg->hsm.b_bus_req = 0; - - langwell_otg_chrg_vbus(0); - langwell_otg_HAAR(0); - - if (lnw->iotg.stop_host) - lnw->iotg.stop_host(&lnw->iotg); - else - dev_dbg(lnw->dev, - "host driver has been removed.\n"); - - set_client_mode(); - langwell_otg_phy_low_power(1); - iotg->otg.state = OTG_STATE_B_IDLE; - } else if (iotg->hsm.a_conn) { - /* delete hsm timer for b_ase0_brst_tmr */ - del_timer_sync(&lnw->hsm_timer); - - langwell_otg_HAAR(0); - iotg->otg.state = OTG_STATE_B_HOST; - langwell_update_transceiver(); - } else if (iotg->hsm.a_bus_resume || - iotg->hsm.b_ase0_brst_tmout) { - /* delete hsm timer for b_ase0_brst_tmr */ - del_timer_sync(&lnw->hsm_timer); - - langwell_otg_HAAR(0); - langwell_otg_nsf_msg(7); - - if (lnw->iotg.stop_host) - lnw->iotg.stop_host(&lnw->iotg); - else - dev_dbg(lnw->dev, - "host driver has been removed.\n"); - - iotg->hsm.a_bus_suspend = 0; - iotg->hsm.b_bus_req = 0; - - if (lnw->iotg.start_peripheral) - lnw->iotg.start_peripheral(&lnw->iotg); - else - dev_dbg(lnw->dev, - "client driver not loaded.\n"); - - iotg->otg.state = OTG_STATE_B_PERIPHERAL; - } - break; - - case OTG_STATE_B_HOST: - if (!iotg->hsm.id) { - iotg->otg.default_a = 1; - iotg->hsm.a_srp_det = 0; - - langwell_otg_chrg_vbus(0); - - if (lnw->iotg.stop_host) - lnw->iotg.stop_host(&lnw->iotg); - else - dev_dbg(lnw->dev, - "host driver has been removed.\n"); - - set_host_mode(); - langwell_otg_phy_low_power(1); - iotg->otg.state = OTG_STATE_A_IDLE; - langwell_update_transceiver(); - } else if (!iotg->hsm.b_sess_vld) { - iotg->hsm.b_hnp_enable = 0; - iotg->hsm.b_bus_req = 0; - - langwell_otg_chrg_vbus(0); - if (lnw->iotg.stop_host) - lnw->iotg.stop_host(&lnw->iotg); - else - dev_dbg(lnw->dev, - "host driver has been removed.\n"); - - set_client_mode(); - langwell_otg_phy_low_power(1); - iotg->otg.state = OTG_STATE_B_IDLE; - } else if ((!iotg->hsm.b_bus_req) || - (!iotg->hsm.a_conn)) { - iotg->hsm.b_bus_req = 0; - langwell_otg_loc_sof(0); - - if (lnw->iotg.stop_host) - lnw->iotg.stop_host(&lnw->iotg); - else - dev_dbg(lnw->dev, - "host driver has been removed.\n"); - - iotg->hsm.a_bus_suspend = 0; - - if (lnw->iotg.start_peripheral) - lnw->iotg.start_peripheral(&lnw->iotg); - else - dev_dbg(lnw->dev, - "client driver not loaded.\n"); - - iotg->otg.state = OTG_STATE_B_PERIPHERAL; - } - break; - - case OTG_STATE_A_IDLE: - iotg->otg.default_a = 1; - if (iotg->hsm.id) { - iotg->otg.default_a = 0; - iotg->hsm.b_bus_req = 0; - iotg->hsm.vbus_srp_up = 0; - - langwell_otg_chrg_vbus(0); - set_client_mode(); - langwell_otg_phy_low_power(1); - iotg->otg.state = OTG_STATE_B_IDLE; - langwell_update_transceiver(); - } else if (!iotg->hsm.a_bus_drop && - (iotg->hsm.a_srp_det || iotg->hsm.a_bus_req)) { - langwell_otg_phy_low_power(0); - - /* Turn on VBus */ - iotg->otg.set_vbus(&iotg->otg, true); - - iotg->hsm.vbus_srp_up = 0; - iotg->hsm.a_wait_vrise_tmout = 0; - langwell_otg_add_timer(a_wait_vrise_tmr); - iotg->otg.state = OTG_STATE_A_WAIT_VRISE; - langwell_update_transceiver(); - } else if (!iotg->hsm.a_bus_drop && iotg->hsm.a_sess_vld) { - iotg->hsm.vbus_srp_up = 1; - } else if (!iotg->hsm.a_sess_vld && iotg->hsm.vbus_srp_up) { - msleep(10); - langwell_otg_phy_low_power(0); - - /* Turn on VBus */ - iotg->otg.set_vbus(&iotg->otg, true); - iotg->hsm.a_srp_det = 1; - iotg->hsm.vbus_srp_up = 0; - iotg->hsm.a_wait_vrise_tmout = 0; - langwell_otg_add_timer(a_wait_vrise_tmr); - iotg->otg.state = OTG_STATE_A_WAIT_VRISE; - langwell_update_transceiver(); - } else if (!iotg->hsm.a_sess_vld && - !iotg->hsm.vbus_srp_up) { - langwell_otg_phy_low_power(1); - } - break; - case OTG_STATE_A_WAIT_VRISE: - if (iotg->hsm.id) { - langwell_otg_del_timer(a_wait_vrise_tmr); - iotg->hsm.b_bus_req = 0; - iotg->otg.default_a = 0; - - /* Turn off VBus */ - iotg->otg.set_vbus(&iotg->otg, false); - set_client_mode(); - langwell_otg_phy_low_power_wait(1); - iotg->otg.state = OTG_STATE_B_IDLE; - } else if (iotg->hsm.a_vbus_vld) { - langwell_otg_del_timer(a_wait_vrise_tmr); - iotg->hsm.b_conn = 0; - if (lnw->iotg.start_host) - lnw->iotg.start_host(&lnw->iotg); - else { - dev_dbg(lnw->dev, "host driver not loaded.\n"); - break; - } - - langwell_otg_add_ktimer(TA_WAIT_BCON_TMR); - iotg->otg.state = OTG_STATE_A_WAIT_BCON; - } else if (iotg->hsm.a_wait_vrise_tmout) { - iotg->hsm.b_conn = 0; - if (iotg->hsm.a_vbus_vld) { - if (lnw->iotg.start_host) - lnw->iotg.start_host(&lnw->iotg); - else { - dev_dbg(lnw->dev, - "host driver not loaded.\n"); - break; - } - langwell_otg_add_ktimer(TA_WAIT_BCON_TMR); - iotg->otg.state = OTG_STATE_A_WAIT_BCON; - } else { - - /* Turn off VBus */ - iotg->otg.set_vbus(&iotg->otg, false); - langwell_otg_phy_low_power_wait(1); - iotg->otg.state = OTG_STATE_A_VBUS_ERR; - } - } - break; - case OTG_STATE_A_WAIT_BCON: - if (iotg->hsm.id) { - /* delete hsm timer for a_wait_bcon_tmr */ - del_timer_sync(&lnw->hsm_timer); - - iotg->otg.default_a = 0; - iotg->hsm.b_bus_req = 0; - - if (lnw->iotg.stop_host) - lnw->iotg.stop_host(&lnw->iotg); - else - dev_dbg(lnw->dev, - "host driver has been removed.\n"); - - /* Turn off VBus */ - iotg->otg.set_vbus(&iotg->otg, false); - set_client_mode(); - langwell_otg_phy_low_power_wait(1); - iotg->otg.state = OTG_STATE_B_IDLE; - langwell_update_transceiver(); - } else if (!iotg->hsm.a_vbus_vld) { - /* delete hsm timer for a_wait_bcon_tmr */ - del_timer_sync(&lnw->hsm_timer); - - if (lnw->iotg.stop_host) - lnw->iotg.stop_host(&lnw->iotg); - else - dev_dbg(lnw->dev, - "host driver has been removed.\n"); - - /* Turn off VBus */ - iotg->otg.set_vbus(&iotg->otg, false); - langwell_otg_phy_low_power_wait(1); - iotg->otg.state = OTG_STATE_A_VBUS_ERR; - } else if (iotg->hsm.a_bus_drop || - (iotg->hsm.a_wait_bcon_tmout && - !iotg->hsm.a_bus_req)) { - /* delete hsm timer for a_wait_bcon_tmr */ - del_timer_sync(&lnw->hsm_timer); - - if (lnw->iotg.stop_host) - lnw->iotg.stop_host(&lnw->iotg); - else - dev_dbg(lnw->dev, - "host driver has been removed.\n"); - - /* Turn off VBus */ - iotg->otg.set_vbus(&iotg->otg, false); - iotg->otg.state = OTG_STATE_A_WAIT_VFALL; - } else if (iotg->hsm.b_conn) { - /* delete hsm timer for a_wait_bcon_tmr */ - del_timer_sync(&lnw->hsm_timer); - - iotg->hsm.a_suspend_req = 0; - iotg->otg.state = OTG_STATE_A_HOST; - if (iotg->hsm.a_srp_det && iotg->otg.host && - !iotg->otg.host->b_hnp_enable) { - /* SRP capable peripheral-only device */ - iotg->hsm.a_bus_req = 1; - iotg->hsm.a_srp_det = 0; - } else if (!iotg->hsm.a_bus_req && iotg->otg.host && - iotg->otg.host->b_hnp_enable) { - /* It is not safe enough to do a fast - * transition from A_WAIT_BCON to - * A_SUSPEND */ - msleep(10000); - if (iotg->hsm.a_bus_req) - break; - - if (request_irq(pdev->irq, - otg_dummy_irq, IRQF_SHARED, - driver_name, iotg->base) != 0) { - dev_dbg(lnw->dev, - "request interrupt %d fail\n", - pdev->irq); - } - - langwell_otg_HABA(1); - iotg->hsm.b_bus_resume = 0; - iotg->hsm.a_aidl_bdis_tmout = 0; - - langwell_otg_loc_sof(0); - /* clear PHCD to enable HW timer */ - langwell_otg_phy_low_power(0); - langwell_otg_add_timer(a_aidl_bdis_tmr); - iotg->otg.state = OTG_STATE_A_SUSPEND; - } else if (!iotg->hsm.a_bus_req && iotg->otg.host && - !iotg->otg.host->b_hnp_enable) { - if (lnw->iotg.stop_host) - lnw->iotg.stop_host(&lnw->iotg); - else - dev_dbg(lnw->dev, - "host driver removed.\n"); - - /* Turn off VBus */ - iotg->otg.set_vbus(&iotg->otg, false); - iotg->otg.state = OTG_STATE_A_WAIT_VFALL; - } - } - break; - case OTG_STATE_A_HOST: - if (iotg->hsm.id) { - iotg->otg.default_a = 0; - iotg->hsm.b_bus_req = 0; - - if (lnw->iotg.stop_host) - lnw->iotg.stop_host(&lnw->iotg); - else - dev_dbg(lnw->dev, - "host driver has been removed.\n"); - - /* Turn off VBus */ - iotg->otg.set_vbus(&iotg->otg, false); - set_client_mode(); - langwell_otg_phy_low_power_wait(1); - iotg->otg.state = OTG_STATE_B_IDLE; - langwell_update_transceiver(); - } else if (iotg->hsm.a_bus_drop || - (iotg->otg.host && - !iotg->otg.host->b_hnp_enable && - !iotg->hsm.a_bus_req)) { - if (lnw->iotg.stop_host) - lnw->iotg.stop_host(&lnw->iotg); - else - dev_dbg(lnw->dev, - "host driver has been removed.\n"); - - /* Turn off VBus */ - iotg->otg.set_vbus(&iotg->otg, false); - iotg->otg.state = OTG_STATE_A_WAIT_VFALL; - } else if (!iotg->hsm.a_vbus_vld) { - if (lnw->iotg.stop_host) - lnw->iotg.stop_host(&lnw->iotg); - else - dev_dbg(lnw->dev, - "host driver has been removed.\n"); - - /* Turn off VBus */ - iotg->otg.set_vbus(&iotg->otg, false); - langwell_otg_phy_low_power_wait(1); - iotg->otg.state = OTG_STATE_A_VBUS_ERR; - } else if (iotg->otg.host && - iotg->otg.host->b_hnp_enable && - !iotg->hsm.a_bus_req) { - /* Set HABA to enable hardware assistance to signal - * A-connect after receiver B-disconnect. Hardware - * will then set client mode and enable URE, SLE and - * PCE after the assistance. otg_dummy_irq is used to - * clean these ints when client driver is not resumed. - */ - if (request_irq(pdev->irq, otg_dummy_irq, IRQF_SHARED, - driver_name, iotg->base) != 0) { - dev_dbg(lnw->dev, - "request interrupt %d failed\n", - pdev->irq); - } - - /* set HABA */ - langwell_otg_HABA(1); - iotg->hsm.b_bus_resume = 0; - iotg->hsm.a_aidl_bdis_tmout = 0; - langwell_otg_loc_sof(0); - /* clear PHCD to enable HW timer */ - langwell_otg_phy_low_power(0); - langwell_otg_add_timer(a_aidl_bdis_tmr); - iotg->otg.state = OTG_STATE_A_SUSPEND; - } else if (!iotg->hsm.b_conn || !iotg->hsm.a_bus_req) { - langwell_otg_add_ktimer(TA_WAIT_BCON_TMR); - iotg->otg.state = OTG_STATE_A_WAIT_BCON; - } - break; - case OTG_STATE_A_SUSPEND: - if (iotg->hsm.id) { - langwell_otg_del_timer(a_aidl_bdis_tmr); - langwell_otg_HABA(0); - free_irq(pdev->irq, iotg->base); - iotg->otg.default_a = 0; - iotg->hsm.b_bus_req = 0; - - if (lnw->iotg.stop_host) - lnw->iotg.stop_host(&lnw->iotg); - else - dev_dbg(lnw->dev, - "host driver has been removed.\n"); - - /* Turn off VBus */ - iotg->otg.set_vbus(&iotg->otg, false); - set_client_mode(); - langwell_otg_phy_low_power(1); - iotg->otg.state = OTG_STATE_B_IDLE; - langwell_update_transceiver(); - } else if (iotg->hsm.a_bus_req || - iotg->hsm.b_bus_resume) { - langwell_otg_del_timer(a_aidl_bdis_tmr); - langwell_otg_HABA(0); - free_irq(pdev->irq, iotg->base); - iotg->hsm.a_suspend_req = 0; - langwell_otg_loc_sof(1); - iotg->otg.state = OTG_STATE_A_HOST; - } else if (iotg->hsm.a_aidl_bdis_tmout || - iotg->hsm.a_bus_drop) { - langwell_otg_del_timer(a_aidl_bdis_tmr); - langwell_otg_HABA(0); - free_irq(pdev->irq, iotg->base); - if (lnw->iotg.stop_host) - lnw->iotg.stop_host(&lnw->iotg); - else - dev_dbg(lnw->dev, - "host driver has been removed.\n"); - - /* Turn off VBus */ - iotg->otg.set_vbus(&iotg->otg, false); - iotg->otg.state = OTG_STATE_A_WAIT_VFALL; - } else if (!iotg->hsm.b_conn && iotg->otg.host && - iotg->otg.host->b_hnp_enable) { - langwell_otg_del_timer(a_aidl_bdis_tmr); - langwell_otg_HABA(0); - free_irq(pdev->irq, iotg->base); - - if (lnw->iotg.stop_host) - lnw->iotg.stop_host(&lnw->iotg); - else - dev_dbg(lnw->dev, - "host driver has been removed.\n"); - - iotg->hsm.b_bus_suspend = 0; - iotg->hsm.b_bus_suspend_vld = 0; - - /* msleep(200); */ - if (lnw->iotg.start_peripheral) - lnw->iotg.start_peripheral(&lnw->iotg); - else - dev_dbg(lnw->dev, - "client driver not loaded.\n"); - - langwell_otg_add_ktimer(TB_BUS_SUSPEND_TMR); - iotg->otg.state = OTG_STATE_A_PERIPHERAL; - break; - } else if (!iotg->hsm.a_vbus_vld) { - langwell_otg_del_timer(a_aidl_bdis_tmr); - langwell_otg_HABA(0); - free_irq(pdev->irq, iotg->base); - if (lnw->iotg.stop_host) - lnw->iotg.stop_host(&lnw->iotg); - else - dev_dbg(lnw->dev, - "host driver has been removed.\n"); - - /* Turn off VBus */ - iotg->otg.set_vbus(&iotg->otg, false); - langwell_otg_phy_low_power_wait(1); - iotg->otg.state = OTG_STATE_A_VBUS_ERR; - } - break; - case OTG_STATE_A_PERIPHERAL: - if (iotg->hsm.id) { - /* delete hsm timer for b_bus_suspend_tmr */ - del_timer_sync(&lnw->hsm_timer); - iotg->otg.default_a = 0; - iotg->hsm.b_bus_req = 0; - if (lnw->iotg.stop_peripheral) - lnw->iotg.stop_peripheral(&lnw->iotg); - else - dev_dbg(lnw->dev, - "client driver has been removed.\n"); - - /* Turn off VBus */ - iotg->otg.set_vbus(&iotg->otg, false); - set_client_mode(); - langwell_otg_phy_low_power_wait(1); - iotg->otg.state = OTG_STATE_B_IDLE; - langwell_update_transceiver(); - } else if (!iotg->hsm.a_vbus_vld) { - /* delete hsm timer for b_bus_suspend_tmr */ - del_timer_sync(&lnw->hsm_timer); - - if (lnw->iotg.stop_peripheral) - lnw->iotg.stop_peripheral(&lnw->iotg); - else - dev_dbg(lnw->dev, - "client driver has been removed.\n"); - - /* Turn off VBus */ - iotg->otg.set_vbus(&iotg->otg, false); - langwell_otg_phy_low_power_wait(1); - iotg->otg.state = OTG_STATE_A_VBUS_ERR; - } else if (iotg->hsm.a_bus_drop) { - /* delete hsm timer for b_bus_suspend_tmr */ - del_timer_sync(&lnw->hsm_timer); - - if (lnw->iotg.stop_peripheral) - lnw->iotg.stop_peripheral(&lnw->iotg); - else - dev_dbg(lnw->dev, - "client driver has been removed.\n"); - - /* Turn off VBus */ - iotg->otg.set_vbus(&iotg->otg, false); - iotg->otg.state = OTG_STATE_A_WAIT_VFALL; - } else if (iotg->hsm.b_bus_suspend) { - /* delete hsm timer for b_bus_suspend_tmr */ - del_timer_sync(&lnw->hsm_timer); - - if (lnw->iotg.stop_peripheral) - lnw->iotg.stop_peripheral(&lnw->iotg); - else - dev_dbg(lnw->dev, - "client driver has been removed.\n"); - - if (lnw->iotg.start_host) - lnw->iotg.start_host(&lnw->iotg); - else - dev_dbg(lnw->dev, - "host driver not loaded.\n"); - langwell_otg_add_ktimer(TA_WAIT_BCON_TMR); - iotg->otg.state = OTG_STATE_A_WAIT_BCON; - } else if (iotg->hsm.b_bus_suspend_tmout) { - u32 val; - val = readl(lnw->iotg.base + CI_PORTSC1); - if (!(val & PORTSC_SUSP)) - break; - - if (lnw->iotg.stop_peripheral) - lnw->iotg.stop_peripheral(&lnw->iotg); - else - dev_dbg(lnw->dev, - "client driver has been removed.\n"); - - if (lnw->iotg.start_host) - lnw->iotg.start_host(&lnw->iotg); - else - dev_dbg(lnw->dev, - "host driver not loaded.\n"); - langwell_otg_add_ktimer(TA_WAIT_BCON_TMR); - iotg->otg.state = OTG_STATE_A_WAIT_BCON; - } - break; - case OTG_STATE_A_VBUS_ERR: - if (iotg->hsm.id) { - iotg->otg.default_a = 0; - iotg->hsm.a_clr_err = 0; - iotg->hsm.a_srp_det = 0; - set_client_mode(); - langwell_otg_phy_low_power(1); - iotg->otg.state = OTG_STATE_B_IDLE; - langwell_update_transceiver(); - } else if (iotg->hsm.a_clr_err) { - iotg->hsm.a_clr_err = 0; - iotg->hsm.a_srp_det = 0; - reset_otg(); - init_hsm(); - if (iotg->otg.state == OTG_STATE_A_IDLE) - langwell_update_transceiver(); - } else { - /* FW will clear PHCD bit when any VBus - * event detected. Reset PHCD to 1 again */ - langwell_otg_phy_low_power(1); - } - break; - case OTG_STATE_A_WAIT_VFALL: - if (iotg->hsm.id) { - iotg->otg.default_a = 0; - set_client_mode(); - langwell_otg_phy_low_power(1); - iotg->otg.state = OTG_STATE_B_IDLE; - langwell_update_transceiver(); - } else if (iotg->hsm.a_bus_req) { - - /* Turn on VBus */ - iotg->otg.set_vbus(&iotg->otg, true); - iotg->hsm.a_wait_vrise_tmout = 0; - langwell_otg_add_timer(a_wait_vrise_tmr); - iotg->otg.state = OTG_STATE_A_WAIT_VRISE; - } else if (!iotg->hsm.a_sess_vld) { - iotg->hsm.a_srp_det = 0; - set_host_mode(); - langwell_otg_phy_low_power(1); - iotg->otg.state = OTG_STATE_A_IDLE; - } - break; - default: - ; - } - - dev_dbg(lnw->dev, "%s: new state = %s\n", __func__, - otg_state_string(iotg->otg.state)); -} - -static ssize_t -show_registers(struct device *_dev, struct device_attribute *attr, char *buf) -{ - struct langwell_otg *lnw = the_transceiver; - char *next; - unsigned size, t; - - next = buf; - size = PAGE_SIZE; - - t = scnprintf(next, size, - "\n" - "USBCMD = 0x%08x\n" - "USBSTS = 0x%08x\n" - "USBINTR = 0x%08x\n" - "ASYNCLISTADDR = 0x%08x\n" - "PORTSC1 = 0x%08x\n" - "HOSTPC1 = 0x%08x\n" - "OTGSC = 0x%08x\n" - "USBMODE = 0x%08x\n", - readl(lnw->iotg.base + 0x30), - readl(lnw->iotg.base + 0x34), - readl(lnw->iotg.base + 0x38), - readl(lnw->iotg.base + 0x48), - readl(lnw->iotg.base + 0x74), - readl(lnw->iotg.base + 0xb4), - readl(lnw->iotg.base + 0xf4), - readl(lnw->iotg.base + 0xf8) - ); - size -= t; - next += t; - - return PAGE_SIZE - size; -} -static DEVICE_ATTR(registers, S_IRUGO, show_registers, NULL); - -static ssize_t -show_hsm(struct device *_dev, struct device_attribute *attr, char *buf) -{ - struct langwell_otg *lnw = the_transceiver; - struct intel_mid_otg_xceiv *iotg = &lnw->iotg; - char *next; - unsigned size, t; - - next = buf; - size = PAGE_SIZE; - - if (iotg->otg.host) - iotg->hsm.a_set_b_hnp_en = iotg->otg.host->b_hnp_enable; - - if (iotg->otg.gadget) - iotg->hsm.b_hnp_enable = iotg->otg.gadget->b_hnp_enable; - - t = scnprintf(next, size, - "\n" - "current state = %s\n" - "a_bus_resume = \t%d\n" - "a_bus_suspend = \t%d\n" - "a_conn = \t%d\n" - "a_sess_vld = \t%d\n" - "a_srp_det = \t%d\n" - "a_vbus_vld = \t%d\n" - "b_bus_resume = \t%d\n" - "b_bus_suspend = \t%d\n" - "b_conn = \t%d\n" - "b_se0_srp = \t%d\n" - "b_sess_end = \t%d\n" - "b_sess_vld = \t%d\n" - "id = \t%d\n" - "a_set_b_hnp_en = \t%d\n" - "b_srp_done = \t%d\n" - "b_hnp_enable = \t%d\n" - "a_wait_vrise_tmout = \t%d\n" - "a_wait_bcon_tmout = \t%d\n" - "a_aidl_bdis_tmout = \t%d\n" - "b_ase0_brst_tmout = \t%d\n" - "a_bus_drop = \t%d\n" - "a_bus_req = \t%d\n" - "a_clr_err = \t%d\n" - "a_suspend_req = \t%d\n" - "b_bus_req = \t%d\n" - "b_bus_suspend_tmout = \t%d\n" - "b_bus_suspend_vld = \t%d\n", - otg_state_string(iotg->otg.state), - iotg->hsm.a_bus_resume, - iotg->hsm.a_bus_suspend, - iotg->hsm.a_conn, - iotg->hsm.a_sess_vld, - iotg->hsm.a_srp_det, - iotg->hsm.a_vbus_vld, - iotg->hsm.b_bus_resume, - iotg->hsm.b_bus_suspend, - iotg->hsm.b_conn, - iotg->hsm.b_se0_srp, - iotg->hsm.b_sess_end, - iotg->hsm.b_sess_vld, - iotg->hsm.id, - iotg->hsm.a_set_b_hnp_en, - iotg->hsm.b_srp_done, - iotg->hsm.b_hnp_enable, - iotg->hsm.a_wait_vrise_tmout, - iotg->hsm.a_wait_bcon_tmout, - iotg->hsm.a_aidl_bdis_tmout, - iotg->hsm.b_ase0_brst_tmout, - iotg->hsm.a_bus_drop, - iotg->hsm.a_bus_req, - iotg->hsm.a_clr_err, - iotg->hsm.a_suspend_req, - iotg->hsm.b_bus_req, - iotg->hsm.b_bus_suspend_tmout, - iotg->hsm.b_bus_suspend_vld - ); - size -= t; - next += t; - - return PAGE_SIZE - size; -} -static DEVICE_ATTR(hsm, S_IRUGO, show_hsm, NULL); - -static ssize_t -get_a_bus_req(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct langwell_otg *lnw = the_transceiver; - char *next; - unsigned size, t; - - next = buf; - size = PAGE_SIZE; - - t = scnprintf(next, size, "%d", lnw->iotg.hsm.a_bus_req); - size -= t; - next += t; - - return PAGE_SIZE - size; -} - -static ssize_t -set_a_bus_req(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) -{ - struct langwell_otg *lnw = the_transceiver; - struct intel_mid_otg_xceiv *iotg = &lnw->iotg; - - if (!iotg->otg.default_a) - return -1; - if (count > 2) - return -1; - - if (buf[0] == '0') { - iotg->hsm.a_bus_req = 0; - dev_dbg(lnw->dev, "User request: a_bus_req = 0\n"); - } else if (buf[0] == '1') { - /* If a_bus_drop is TRUE, a_bus_req can't be set */ - if (iotg->hsm.a_bus_drop) - return -1; - iotg->hsm.a_bus_req = 1; - dev_dbg(lnw->dev, "User request: a_bus_req = 1\n"); - } - if (spin_trylock(&lnw->wq_lock)) { - langwell_update_transceiver(); - spin_unlock(&lnw->wq_lock); - } - return count; -} -static DEVICE_ATTR(a_bus_req, S_IRUGO | S_IWUSR, get_a_bus_req, set_a_bus_req); - -static ssize_t -get_a_bus_drop(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct langwell_otg *lnw = the_transceiver; - char *next; - unsigned size, t; - - next = buf; - size = PAGE_SIZE; - - t = scnprintf(next, size, "%d", lnw->iotg.hsm.a_bus_drop); - size -= t; - next += t; - - return PAGE_SIZE - size; -} - -static ssize_t -set_a_bus_drop(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) -{ - struct langwell_otg *lnw = the_transceiver; - struct intel_mid_otg_xceiv *iotg = &lnw->iotg; - - if (!iotg->otg.default_a) - return -1; - if (count > 2) - return -1; - - if (buf[0] == '0') { - iotg->hsm.a_bus_drop = 0; - dev_dbg(lnw->dev, "User request: a_bus_drop = 0\n"); - } else if (buf[0] == '1') { - iotg->hsm.a_bus_drop = 1; - iotg->hsm.a_bus_req = 0; - dev_dbg(lnw->dev, "User request: a_bus_drop = 1\n"); - dev_dbg(lnw->dev, "User request: and a_bus_req = 0\n"); - } - if (spin_trylock(&lnw->wq_lock)) { - langwell_update_transceiver(); - spin_unlock(&lnw->wq_lock); - } - return count; -} -static DEVICE_ATTR(a_bus_drop, S_IRUGO | S_IWUSR, get_a_bus_drop, set_a_bus_drop); - -static ssize_t -get_b_bus_req(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct langwell_otg *lnw = the_transceiver; - char *next; - unsigned size, t; - - next = buf; - size = PAGE_SIZE; - - t = scnprintf(next, size, "%d", lnw->iotg.hsm.b_bus_req); - size -= t; - next += t; - - return PAGE_SIZE - size; -} - -static ssize_t -set_b_bus_req(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) -{ - struct langwell_otg *lnw = the_transceiver; - struct intel_mid_otg_xceiv *iotg = &lnw->iotg; - - if (iotg->otg.default_a) - return -1; - - if (count > 2) - return -1; - - if (buf[0] == '0') { - iotg->hsm.b_bus_req = 0; - dev_dbg(lnw->dev, "User request: b_bus_req = 0\n"); - } else if (buf[0] == '1') { - iotg->hsm.b_bus_req = 1; - dev_dbg(lnw->dev, "User request: b_bus_req = 1\n"); - } - if (spin_trylock(&lnw->wq_lock)) { - langwell_update_transceiver(); - spin_unlock(&lnw->wq_lock); - } - return count; -} -static DEVICE_ATTR(b_bus_req, S_IRUGO | S_IWUSR, get_b_bus_req, set_b_bus_req); - -static ssize_t -set_a_clr_err(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) -{ - struct langwell_otg *lnw = the_transceiver; - struct intel_mid_otg_xceiv *iotg = &lnw->iotg; - - if (!iotg->otg.default_a) - return -1; - if (count > 2) - return -1; - - if (buf[0] == '1') { - iotg->hsm.a_clr_err = 1; - dev_dbg(lnw->dev, "User request: a_clr_err = 1\n"); - } - if (spin_trylock(&lnw->wq_lock)) { - langwell_update_transceiver(); - spin_unlock(&lnw->wq_lock); - } - return count; -} -static DEVICE_ATTR(a_clr_err, S_IWUSR, NULL, set_a_clr_err); - -static struct attribute *inputs_attrs[] = { - &dev_attr_a_bus_req.attr, - &dev_attr_a_bus_drop.attr, - &dev_attr_b_bus_req.attr, - &dev_attr_a_clr_err.attr, - NULL, -}; - -static struct attribute_group debug_dev_attr_group = { - .name = "inputs", - .attrs = inputs_attrs, -}; - -static int langwell_otg_probe(struct pci_dev *pdev, - const struct pci_device_id *id) -{ - unsigned long resource, len; - void __iomem *base = NULL; - int retval; - u32 val32; - struct langwell_otg *lnw; - char qname[] = "langwell_otg_queue"; - - retval = 0; - dev_dbg(&pdev->dev, "\notg controller is detected.\n"); - if (pci_enable_device(pdev) < 0) { - retval = -ENODEV; - goto done; - } - - lnw = kzalloc(sizeof *lnw, GFP_KERNEL); - if (lnw == NULL) { - retval = -ENOMEM; - goto done; - } - the_transceiver = lnw; - - /* control register: BAR 0 */ - resource = pci_resource_start(pdev, 0); - len = pci_resource_len(pdev, 0); - if (!request_mem_region(resource, len, driver_name)) { - retval = -EBUSY; - goto err; - } - lnw->region = 1; - - base = ioremap_nocache(resource, len); - if (base == NULL) { - retval = -EFAULT; - goto err; - } - lnw->iotg.base = base; - - if (!request_mem_region(USBCFG_ADDR, USBCFG_LEN, driver_name)) { - retval = -EBUSY; - goto err; - } - lnw->cfg_region = 1; - - /* For the SCCB.USBCFG register */ - base = ioremap_nocache(USBCFG_ADDR, USBCFG_LEN); - if (base == NULL) { - retval = -EFAULT; - goto err; - } - lnw->usbcfg = base; - - if (!pdev->irq) { - dev_dbg(&pdev->dev, "No IRQ.\n"); - retval = -ENODEV; - goto err; - } - - lnw->qwork = create_singlethread_workqueue(qname); - if (!lnw->qwork) { - dev_dbg(&pdev->dev, "cannot create workqueue %s\n", qname); - retval = -ENOMEM; - goto err; - } - INIT_WORK(&lnw->work, langwell_otg_work); - - /* OTG common part */ - lnw->dev = &pdev->dev; - lnw->iotg.otg.dev = lnw->dev; - lnw->iotg.otg.label = driver_name; - lnw->iotg.otg.set_host = langwell_otg_set_host; - lnw->iotg.otg.set_peripheral = langwell_otg_set_peripheral; - lnw->iotg.otg.set_power = langwell_otg_set_power; - lnw->iotg.otg.set_vbus = langwell_otg_set_vbus; - lnw->iotg.otg.start_srp = langwell_otg_start_srp; - lnw->iotg.otg.state = OTG_STATE_UNDEFINED; - - if (otg_set_transceiver(&lnw->iotg.otg)) { - dev_dbg(lnw->dev, "can't set transceiver\n"); - retval = -EBUSY; - goto err; - } - - reset_otg(); - init_hsm(); - - spin_lock_init(&lnw->lock); - spin_lock_init(&lnw->wq_lock); - INIT_LIST_HEAD(&active_timers); - retval = langwell_otg_init_timers(&lnw->iotg.hsm); - if (retval) { - dev_dbg(&pdev->dev, "Failed to init timers\n"); - goto err; - } - - init_timer(&lnw->hsm_timer); - ATOMIC_INIT_NOTIFIER_HEAD(&lnw->iotg.iotg_notifier); - - lnw->iotg_notifier.notifier_call = langwell_otg_iotg_notify; - - retval = intel_mid_otg_register_notifier(&lnw->iotg, - &lnw->iotg_notifier); - if (retval) { - dev_dbg(lnw->dev, "Failed to register notifier\n"); - goto err; - } - - if (request_irq(pdev->irq, otg_irq, IRQF_SHARED, - driver_name, lnw) != 0) { - dev_dbg(lnw->dev, "request interrupt %d failed\n", pdev->irq); - retval = -EBUSY; - goto err; - } - - /* enable OTGSC int */ - val32 = OTGSC_DPIE | OTGSC_BSEIE | OTGSC_BSVIE | - OTGSC_ASVIE | OTGSC_AVVIE | OTGSC_IDIE | OTGSC_IDPU; - writel(val32, lnw->iotg.base + CI_OTGSC); - - retval = device_create_file(&pdev->dev, &dev_attr_registers); - if (retval < 0) { - dev_dbg(lnw->dev, - "Can't register sysfs attribute: %d\n", retval); - goto err; - } - - retval = device_create_file(&pdev->dev, &dev_attr_hsm); - if (retval < 0) { - dev_dbg(lnw->dev, "Can't hsm sysfs attribute: %d\n", retval); - goto err; - } - - retval = sysfs_create_group(&pdev->dev.kobj, &debug_dev_attr_group); - if (retval < 0) { - dev_dbg(lnw->dev, - "Can't register sysfs attr group: %d\n", retval); - goto err; - } - - if (lnw->iotg.otg.state == OTG_STATE_A_IDLE) - langwell_update_transceiver(); - - return 0; - -err: - if (the_transceiver) - langwell_otg_remove(pdev); -done: - return retval; -} - -static void langwell_otg_remove(struct pci_dev *pdev) -{ - struct langwell_otg *lnw = the_transceiver; - - if (lnw->qwork) { - flush_workqueue(lnw->qwork); - destroy_workqueue(lnw->qwork); - } - intel_mid_otg_unregister_notifier(&lnw->iotg, &lnw->iotg_notifier); - langwell_otg_free_timers(); - - /* disable OTGSC interrupt as OTGSC doesn't change in reset */ - writel(0, lnw->iotg.base + CI_OTGSC); - - if (pdev->irq) - free_irq(pdev->irq, lnw); - if (lnw->usbcfg) - iounmap(lnw->usbcfg); - if (lnw->cfg_region) - release_mem_region(USBCFG_ADDR, USBCFG_LEN); - if (lnw->iotg.base) - iounmap(lnw->iotg.base); - if (lnw->region) - release_mem_region(pci_resource_start(pdev, 0), - pci_resource_len(pdev, 0)); - - otg_set_transceiver(NULL); - pci_disable_device(pdev); - sysfs_remove_group(&pdev->dev.kobj, &debug_dev_attr_group); - device_remove_file(&pdev->dev, &dev_attr_hsm); - device_remove_file(&pdev->dev, &dev_attr_registers); - kfree(lnw); - lnw = NULL; -} - -static void transceiver_suspend(struct pci_dev *pdev) -{ - pci_save_state(pdev); - pci_set_power_state(pdev, PCI_D3hot); - langwell_otg_phy_low_power(1); -} - -static int langwell_otg_suspend(struct pci_dev *pdev, pm_message_t message) -{ - struct langwell_otg *lnw = the_transceiver; - struct intel_mid_otg_xceiv *iotg = &lnw->iotg; - int ret = 0; - - /* Disbale OTG interrupts */ - langwell_otg_intr(0); - - if (pdev->irq) - free_irq(pdev->irq, lnw); - - /* Prevent more otg_work */ - flush_workqueue(lnw->qwork); - destroy_workqueue(lnw->qwork); - lnw->qwork = NULL; - - /* start actions */ - switch (iotg->otg.state) { - case OTG_STATE_A_WAIT_VFALL: - iotg->otg.state = OTG_STATE_A_IDLE; - case OTG_STATE_A_IDLE: - case OTG_STATE_B_IDLE: - case OTG_STATE_A_VBUS_ERR: - transceiver_suspend(pdev); - break; - case OTG_STATE_A_WAIT_VRISE: - langwell_otg_del_timer(a_wait_vrise_tmr); - iotg->hsm.a_srp_det = 0; - - /* Turn off VBus */ - iotg->otg.set_vbus(&iotg->otg, false); - iotg->otg.state = OTG_STATE_A_IDLE; - transceiver_suspend(pdev); - break; - case OTG_STATE_A_WAIT_BCON: - del_timer_sync(&lnw->hsm_timer); - if (lnw->iotg.stop_host) - lnw->iotg.stop_host(&lnw->iotg); - else - dev_dbg(&pdev->dev, "host driver has been removed.\n"); - - iotg->hsm.a_srp_det = 0; - - /* Turn off VBus */ - iotg->otg.set_vbus(&iotg->otg, false); - iotg->otg.state = OTG_STATE_A_IDLE; - transceiver_suspend(pdev); - break; - case OTG_STATE_A_HOST: - if (lnw->iotg.stop_host) - lnw->iotg.stop_host(&lnw->iotg); - else - dev_dbg(&pdev->dev, "host driver has been removed.\n"); - - iotg->hsm.a_srp_det = 0; - - /* Turn off VBus */ - iotg->otg.set_vbus(&iotg->otg, false); - - iotg->otg.state = OTG_STATE_A_IDLE; - transceiver_suspend(pdev); - break; - case OTG_STATE_A_SUSPEND: - langwell_otg_del_timer(a_aidl_bdis_tmr); - langwell_otg_HABA(0); - if (lnw->iotg.stop_host) - lnw->iotg.stop_host(&lnw->iotg); - else - dev_dbg(lnw->dev, "host driver has been removed.\n"); - iotg->hsm.a_srp_det = 0; - - /* Turn off VBus */ - iotg->otg.set_vbus(&iotg->otg, false); - iotg->otg.state = OTG_STATE_A_IDLE; - transceiver_suspend(pdev); - break; - case OTG_STATE_A_PERIPHERAL: - del_timer_sync(&lnw->hsm_timer); - - if (lnw->iotg.stop_peripheral) - lnw->iotg.stop_peripheral(&lnw->iotg); - else - dev_dbg(&pdev->dev, - "client driver has been removed.\n"); - iotg->hsm.a_srp_det = 0; - - /* Turn off VBus */ - iotg->otg.set_vbus(&iotg->otg, false); - iotg->otg.state = OTG_STATE_A_IDLE; - transceiver_suspend(pdev); - break; - case OTG_STATE_B_HOST: - if (lnw->iotg.stop_host) - lnw->iotg.stop_host(&lnw->iotg); - else - dev_dbg(&pdev->dev, "host driver has been removed.\n"); - iotg->hsm.b_bus_req = 0; - iotg->otg.state = OTG_STATE_B_IDLE; - transceiver_suspend(pdev); - break; - case OTG_STATE_B_PERIPHERAL: - if (lnw->iotg.stop_peripheral) - lnw->iotg.stop_peripheral(&lnw->iotg); - else - dev_dbg(&pdev->dev, - "client driver has been removed.\n"); - iotg->otg.state = OTG_STATE_B_IDLE; - transceiver_suspend(pdev); - break; - case OTG_STATE_B_WAIT_ACON: - /* delete hsm timer for b_ase0_brst_tmr */ - del_timer_sync(&lnw->hsm_timer); - - langwell_otg_HAAR(0); - - if (lnw->iotg.stop_host) - lnw->iotg.stop_host(&lnw->iotg); - else - dev_dbg(&pdev->dev, "host driver has been removed.\n"); - iotg->hsm.b_bus_req = 0; - iotg->otg.state = OTG_STATE_B_IDLE; - transceiver_suspend(pdev); - break; - default: - dev_dbg(lnw->dev, "error state before suspend\n"); - break; - } - - return ret; -} - -static void transceiver_resume(struct pci_dev *pdev) -{ - pci_restore_state(pdev); - pci_set_power_state(pdev, PCI_D0); -} - -static int langwell_otg_resume(struct pci_dev *pdev) -{ - struct langwell_otg *lnw = the_transceiver; - int ret = 0; - - transceiver_resume(pdev); - - lnw->qwork = create_singlethread_workqueue("langwell_otg_queue"); - if (!lnw->qwork) { - dev_dbg(&pdev->dev, "cannot create langwell otg workqueuen"); - ret = -ENOMEM; - goto error; - } - - if (request_irq(pdev->irq, otg_irq, IRQF_SHARED, - driver_name, lnw) != 0) { - dev_dbg(&pdev->dev, "request interrupt %d failed\n", pdev->irq); - ret = -EBUSY; - goto error; - } - - /* enable OTG interrupts */ - langwell_otg_intr(1); - - update_hsm(); - - langwell_update_transceiver(); - - return ret; -error: - langwell_otg_intr(0); - transceiver_suspend(pdev); - return ret; -} - -static int __init langwell_otg_init(void) -{ - return pci_register_driver(&otg_pci_driver); -} -module_init(langwell_otg_init); - -static void __exit langwell_otg_cleanup(void) -{ - pci_unregister_driver(&otg_pci_driver); -} -module_exit(langwell_otg_cleanup); diff --git a/drivers/usb/otg/mv_otg.c b/drivers/usb/otg/mv_otg.c index db0d4fcdc8e..b5fbe1452ab 100644 --- a/drivers/usb/otg/mv_otg.c +++ b/drivers/usb/otg/mv_otg.c @@ -202,6 +202,7 @@ static void mv_otg_init_irq(struct mv_otg *mvotg) static void mv_otg_start_host(struct mv_otg *mvotg, int on) { +#ifdef CONFIG_USB struct otg_transceiver *otg = &mvotg->otg; struct usb_hcd *hcd; @@ -216,6 +217,7 @@ static void mv_otg_start_host(struct mv_otg *mvotg, int on) usb_add_hcd(hcd, hcd->irq, IRQF_SHARED); else usb_remove_hcd(hcd); +#endif /* CONFIG_USB */ } static void mv_otg_start_periphrals(struct mv_otg *mvotg, int on) diff --git a/drivers/usb/renesas_usbhs/mod_gadget.c b/drivers/usb/renesas_usbhs/mod_gadget.c index 528691d5f3e..7542aa94a46 100644 --- a/drivers/usb/renesas_usbhs/mod_gadget.c +++ b/drivers/usb/renesas_usbhs/mod_gadget.c @@ -425,7 +425,7 @@ static int usbhsg_recip_run_handle(struct usbhs_priv *priv, struct usbhs_pipe *pipe; int recip = ctrl->bRequestType & USB_RECIP_MASK; int nth = le16_to_cpu(ctrl->wIndex) & USB_ENDPOINT_NUMBER_MASK; - int ret; + int ret = 0; int (*func)(struct usbhs_priv *priv, struct usbhsg_uep *uep, struct usb_ctrlrequest *ctrl); char *msg; diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index fba1147ed91..08a5575724c 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -39,6 +39,8 @@ static void cp210x_get_termios(struct tty_struct *, struct usb_serial_port *port); static void cp210x_get_termios_port(struct usb_serial_port *port, unsigned int *cflagp, unsigned int *baudp); +static void cp210x_change_speed(struct tty_struct *, struct usb_serial_port *, + struct ktermios *); static void cp210x_set_termios(struct tty_struct *, struct usb_serial_port *, struct ktermios*); static int cp210x_tiocmget(struct tty_struct *); @@ -134,10 +136,13 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(0x16DC, 0x0011) }, /* W-IE-NE-R Plein & Baus GmbH RCM Remote Control for MARATON Power Supply */ { USB_DEVICE(0x16DC, 0x0012) }, /* W-IE-NE-R Plein & Baus GmbH MPOD Multi Channel Power Supply */ { USB_DEVICE(0x16DC, 0x0015) }, /* W-IE-NE-R Plein & Baus GmbH CML Control, Monitoring and Data Logger */ + { USB_DEVICE(0x17A8, 0x0001) }, /* Kamstrup Optical Eye/3-wire */ + { USB_DEVICE(0x17A8, 0x0005) }, /* Kamstrup M-Bus Master MultiPort 250D */ { USB_DEVICE(0x17F4, 0xAAAA) }, /* Wavesense Jazz blood glucose meter */ { USB_DEVICE(0x1843, 0x0200) }, /* Vaisala USB Instrument Cable */ { USB_DEVICE(0x18EF, 0xE00F) }, /* ELV USB-I2C-Interface */ { USB_DEVICE(0x1BE3, 0x07A6) }, /* WAGO 750-923 USB Service Cable */ + { USB_DEVICE(0x3195, 0xF190) }, /* Link Instruments MSO-19 */ { USB_DEVICE(0x413C, 0x9500) }, /* DW700 GPS USB interface */ { } /* Terminating Entry */ }; @@ -201,6 +206,8 @@ static struct usb_serial_driver cp210x_device = { #define CP210X_EMBED_EVENTS 0x15 #define CP210X_GET_EVENTSTATE 0x16 #define CP210X_SET_CHARS 0x19 +#define CP210X_GET_BAUDRATE 0x1D +#define CP210X_SET_BAUDRATE 0x1E /* CP210X_IFC_ENABLE */ #define UART_ENABLE 0x0001 @@ -360,8 +367,8 @@ static inline int cp210x_set_config_single(struct usb_serial_port *port, * Quantises the baud rate as per AN205 Table 1 */ static unsigned int cp210x_quantise_baudrate(unsigned int baud) { - if (baud <= 56) baud = 0; - else if (baud <= 300) baud = 300; + if (baud <= 300) + baud = 300; else if (baud <= 600) baud = 600; else if (baud <= 1200) baud = 1200; else if (baud <= 1800) baud = 1800; @@ -389,10 +396,10 @@ static unsigned int cp210x_quantise_baudrate(unsigned int baud) { else if (baud <= 491520) baud = 460800; else if (baud <= 567138) baud = 500000; else if (baud <= 670254) baud = 576000; - else if (baud <= 1053257) baud = 921600; - else if (baud <= 1474560) baud = 1228800; - else if (baud <= 2457600) baud = 1843200; - else baud = 3686400; + else if (baud < 1000000) + baud = 921600; + else if (baud > 2000000) + baud = 2000000; return baud; } @@ -409,13 +416,14 @@ static int cp210x_open(struct tty_struct *tty, struct usb_serial_port *port) return result; } - result = usb_serial_generic_open(tty, port); - if (result) - return result; - /* Configure the termios structure */ cp210x_get_termios(tty, port); - return 0; + + /* The baud rate must be initialised on cp2104 */ + if (tty) + cp210x_change_speed(tty, port, NULL); + + return usb_serial_generic_open(tty, port); } static void cp210x_close(struct usb_serial_port *port) @@ -467,10 +475,7 @@ static void cp210x_get_termios_port(struct usb_serial_port *port, dbg("%s - port %d", __func__, port->number); - cp210x_get_config(port, CP210X_GET_BAUDDIV, &baud, 2); - /* Convert to baudrate */ - if (baud) - baud = cp210x_quantise_baudrate((BAUD_RATE_GEN_FREQ + baud/2)/ baud); + cp210x_get_config(port, CP210X_GET_BAUDRATE, &baud, 4); dbg("%s - baud rate = %d", __func__, baud); *baudp = baud; @@ -579,11 +584,64 @@ static void cp210x_get_termios_port(struct usb_serial_port *port, *cflagp = cflag; } +/* + * CP2101 supports the following baud rates: + * + * 300, 600, 1200, 1800, 2400, 4800, 7200, 9600, 14400, 19200, 28800, + * 38400, 56000, 57600, 115200, 128000, 230400, 460800, 921600 + * + * CP2102 and CP2103 support the following additional rates: + * + * 4000, 16000, 51200, 64000, 76800, 153600, 250000, 256000, 500000, + * 576000 + * + * The device will map a requested rate to a supported one, but the result + * of requests for rates greater than 1053257 is undefined (see AN205). + * + * CP2104, CP2105 and CP2110 support most rates up to 2M, 921k and 1M baud, + * respectively, with an error less than 1%. The actual rates are determined + * by + * + * div = round(freq / (2 x prescale x request)) + * actual = freq / (2 x prescale x div) + * + * For CP2104 and CP2105 freq is 48Mhz and prescale is 4 for request <= 365bps + * or 1 otherwise. + * For CP2110 freq is 24Mhz and prescale is 4 for request <= 300bps or 1 + * otherwise. + */ +static void cp210x_change_speed(struct tty_struct *tty, + struct usb_serial_port *port, struct ktermios *old_termios) +{ + u32 baud; + + baud = tty->termios->c_ospeed; + + /* This maps the requested rate to a rate valid on cp2102 or cp2103, + * or to an arbitrary rate in [1M,2M]. + * + * NOTE: B0 is not implemented. + */ + baud = cp210x_quantise_baudrate(baud); + + dbg("%s - setting baud rate to %u", __func__, baud); + if (cp210x_set_config(port, CP210X_SET_BAUDRATE, &baud, + sizeof(baud))) { + dev_warn(&port->dev, "failed to set baud rate to %u\n", baud); + if (old_termios) + baud = old_termios->c_ospeed; + else + baud = 9600; + } + + tty_encode_baud_rate(tty, baud, baud); +} + static void cp210x_set_termios(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios *old_termios) { unsigned int cflag, old_cflag; - unsigned int baud = 0, bits; + unsigned int bits; unsigned int modem_ctl[4]; dbg("%s - port %d", __func__, port->number); @@ -593,20 +651,9 @@ static void cp210x_set_termios(struct tty_struct *tty, cflag = tty->termios->c_cflag; old_cflag = old_termios->c_cflag; - baud = cp210x_quantise_baudrate(tty_get_baud_rate(tty)); - - /* If the baud rate is to be updated*/ - if (baud != tty_termios_baud_rate(old_termios) && baud != 0) { - dbg("%s - Setting baud rate to %d baud", __func__, - baud); - if (cp210x_set_config_single(port, CP210X_SET_BAUDDIV, - ((BAUD_RATE_GEN_FREQ + baud/2) / baud))) { - dbg("Baud rate requested not supported by device"); - baud = tty_termios_baud_rate(old_termios); - } - } - /* Report back the resulting baud rate */ - tty_encode_baud_rate(tty, baud, baud); + + if (tty->termios->c_ospeed != old_termios->c_ospeed) + cp210x_change_speed(tty, port, old_termios); /* If the number of data bits is to be updated */ if ((cflag & CSIZE) != (old_cflag & CSIZE)) { diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 01b6404df39..f770415305f 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -797,6 +797,7 @@ static struct usb_device_id id_table_combined [] = { .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, { USB_DEVICE(ADI_VID, ADI_GNICEPLUS_PID), .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, + { USB_DEVICE(HORNBY_VID, HORNBY_ELITE_PID) }, { USB_DEVICE(JETI_VID, JETI_SPC1201_PID) }, { USB_DEVICE(MARVELL_VID, MARVELL_SHEEVAPLUG_PID), .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, @@ -805,6 +806,8 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(BAYER_VID, BAYER_CONTOUR_CABLE_PID) }, { USB_DEVICE(FTDI_VID, MARVELL_OPENRD_PID), .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, + { USB_DEVICE(FTDI_VID, TI_XDS100V2_PID), + .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, { USB_DEVICE(FTDI_VID, HAMEG_HO820_PID) }, { USB_DEVICE(FTDI_VID, HAMEG_HO720_PID) }, { USB_DEVICE(FTDI_VID, HAMEG_HO730_PID) }, @@ -836,11 +839,13 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, FTDI_SCIENCESCOPE_LOGBOOKML_PID) }, { USB_DEVICE(FTDI_VID, FTDI_SCIENCESCOPE_LS_LOGBOOK_PID) }, { USB_DEVICE(FTDI_VID, FTDI_SCIENCESCOPE_HS_LOGBOOK_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_CINTERION_MC55I_PID) }, { USB_DEVICE(FTDI_VID, FTDI_DOTEC_PID) }, { USB_DEVICE(QIHARDWARE_VID, MILKYMISTONE_JTAGSERIAL_PID), .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, { USB_DEVICE(ST_VID, ST_STMCLT1030_PID), .driver_info = (kernel_ulong_t)&ftdi_stmclite_quirk }, + { USB_DEVICE(FTDI_VID, FTDI_RF_R106) }, { }, /* Optional parameter entry */ { } /* Terminating entry */ }; @@ -1333,8 +1338,7 @@ static int set_serial_info(struct tty_struct *tty, goto check_and_exit; } - if ((new_serial.baud_base != priv->baud_base) && - (new_serial.baud_base < 9600)) { + if (new_serial.baud_base != priv->baud_base) { mutex_unlock(&priv->cfg_lock); return -EINVAL; } @@ -1824,6 +1828,7 @@ static int ftdi_sio_port_remove(struct usb_serial_port *port) static int ftdi_open(struct tty_struct *tty, struct usb_serial_port *port) { + struct ktermios dummy; struct usb_device *dev = port->serial->dev; struct ftdi_private *priv = usb_get_serial_port_data(port); int result; @@ -1842,8 +1847,10 @@ static int ftdi_open(struct tty_struct *tty, struct usb_serial_port *port) This is same behaviour as serial.c/rs_open() - Kuba */ /* ftdi_set_termios will send usb control messages */ - if (tty) - ftdi_set_termios(tty, port, tty->termios); + if (tty) { + memset(&dummy, 0, sizeof(dummy)); + ftdi_set_termios(tty, port, &dummy); + } /* Start reading from the device */ result = usb_serial_generic_open(tty, port); diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h index df1d7da933e..6f6058f0db1 100644 --- a/drivers/usb/serial/ftdi_sio_ids.h +++ b/drivers/usb/serial/ftdi_sio_ids.h @@ -39,6 +39,13 @@ /* www.candapter.com Ewert Energy Systems CANdapter device */ #define FTDI_CANDAPTER_PID 0x9F80 /* Product Id */ +/* + * Texas Instruments XDS100v2 JTAG / BeagleBone A3 + * http://processors.wiki.ti.com/index.php/XDS100 + * http://beagleboard.org/bone + */ +#define TI_XDS100V2_PID 0xa6d0 + #define FTDI_NXTCAM_PID 0xABB8 /* NXTCam for Mindstorms NXT */ /* US Interface Navigator (http://www.usinterface.com/) */ @@ -525,6 +532,12 @@ #define ADI_GNICEPLUS_PID 0xF001 /* + * Hornby Elite + */ +#define HORNBY_VID 0x04D8 +#define HORNBY_ELITE_PID 0x000A + +/* * RATOC REX-USB60F */ #define RATOC_VENDOR_ID 0x0584 @@ -1168,3 +1181,16 @@ */ /* TagTracer MIFARE*/ #define FTDI_ZEITCONTROL_TAGTRACE_MIFARE_PID 0xF7C0 + +/* + * Rainforest Automation + */ +/* ZigBee controller */ +#define FTDI_RF_R106 0x8A28 + +/* + * Product: HCP HIT GPRS modem + * Manufacturer: HCP d.o.o. + * ATI command output: Cinterion MC55i + */ +#define FTDI_CINTERION_MC55I_PID 0xA951 diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c index 65bf06aa591..5818bfc3261 100644 --- a/drivers/usb/serial/io_ti.c +++ b/drivers/usb/serial/io_ti.c @@ -2657,15 +2657,7 @@ cleanup: static void edge_disconnect(struct usb_serial *serial) { - int i; - struct edgeport_port *edge_port; - dbg("%s", __func__); - - for (i = 0; i < serial->num_ports; ++i) { - edge_port = usb_get_serial_port_data(serial->port[i]); - edge_remove_sysfs_attrs(edge_port->port); - } } static void edge_release(struct usb_serial *serial) @@ -2744,6 +2736,7 @@ static struct usb_serial_driver edgeport_1port_device = { .disconnect = edge_disconnect, .release = edge_release, .port_probe = edge_create_sysfs_attrs, + .port_remove = edge_remove_sysfs_attrs, .ioctl = edge_ioctl, .set_termios = edge_set_termios, .tiocmget = edge_tiocmget, @@ -2775,6 +2768,7 @@ static struct usb_serial_driver edgeport_2port_device = { .disconnect = edge_disconnect, .release = edge_release, .port_probe = edge_create_sysfs_attrs, + .port_remove = edge_remove_sysfs_attrs, .ioctl = edge_ioctl, .set_termios = edge_set_termios, .tiocmget = edge_tiocmget, diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c index 5d3beeeb5fd..a92a3efb507 100644 --- a/drivers/usb/serial/kobil_sct.c +++ b/drivers/usb/serial/kobil_sct.c @@ -38,7 +38,7 @@ #include <linux/ioctl.h> #include "kobil_sct.h" -static int debug; +static bool debug; /* Version Information */ #define DRIVER_VERSION "21/05/2004" diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 420d9857394..b54afceb961 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -480,6 +480,10 @@ static void option_instat_callback(struct urb *urb); #define ZD_VENDOR_ID 0x0685 #define ZD_PRODUCT_7000 0x7000 +/* LG products */ +#define LG_VENDOR_ID 0x1004 +#define LG_PRODUCT_L02C 0x618f + /* some devices interfaces need special handling due to a number of reasons */ enum option_blacklist_reason { OPTION_BLACKLIST_NONE = 0, @@ -784,7 +788,6 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0012, 0xff, 0xff, 0xff), .driver_info = (kernel_ulong_t)&net_intf1_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0013, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0014, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MF628, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0016, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0017, 0xff, 0xff, 0xff), @@ -799,7 +802,6 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0024, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0025, 0xff, 0xff, 0xff), .driver_info = (kernel_ulong_t)&net_intf1_blacklist }, - /* { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0026, 0xff, 0xff, 0xff) }, */ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0028, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0029, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0030, 0xff, 0xff, 0xff) }, @@ -824,7 +826,6 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0051, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0052, 0xff, 0xff, 0xff), .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, - /* { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0053, 0xff, 0xff, 0xff) }, */ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0054, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0055, 0xff, 0xff, 0xff), .driver_info = (kernel_ulong_t)&net_intf1_blacklist }, @@ -832,7 +833,6 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0057, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0058, 0xff, 0xff, 0xff), .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0059, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0061, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0062, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0063, 0xff, 0xff, 0xff), @@ -842,7 +842,6 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0066, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0067, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0069, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0070, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0076, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0077, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0078, 0xff, 0xff, 0xff) }, @@ -851,6 +850,16 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0083, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0086, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0087, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0088, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0089, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0090, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0091, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0092, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0093, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0094, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0095, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0096, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0097, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0104, 0xff, 0xff, 0xff), .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0105, 0xff, 0xff, 0xff) }, @@ -871,23 +880,18 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0143, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0144, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0145, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0146, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0147, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0148, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0149, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0150, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0151, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0152, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0153, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0154, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0155, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0156, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0157, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0158, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0159, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0160, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0161, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0162, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0164, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0165, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1008, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1010, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1012, 0xff, 0xff, 0xff) }, @@ -1062,17 +1066,27 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1298, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1299, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1300, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x2002, 0xff, + 0xff, 0xff), .driver_info = (kernel_ulong_t)&zte_k3765_z_blacklist }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x2003, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0014, 0xff, 0xff, 0xff) }, /* ZTE CDMA products */ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0027, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0059, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0060, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0070, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0073, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0094, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0130, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0133, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0141, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x2002, 0xff, - 0xff, 0xff), .driver_info = (kernel_ulong_t)&zte_k3765_z_blacklist }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x2003, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0147, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0152, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0168, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0170, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0176, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0178, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_CDMA_TECH, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC8710, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC2726, 0xff, 0xff, 0xff) }, @@ -1183,6 +1197,7 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLU526) }, { USB_DEVICE_AND_INTERFACE_INFO(VIETTEL_VENDOR_ID, VIETTEL_PRODUCT_VT1000, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZD_VENDOR_ID, ZD_PRODUCT_7000, 0xff, 0xff, 0xff) }, + { USB_DEVICE(LG_VENDOR_ID, LG_PRODUCT_L02C) }, /* docomo L-02C modem */ { } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, option_ids); diff --git a/drivers/usb/serial/qcaux.c b/drivers/usb/serial/qcaux.c index 30b73e68a90..a34819884c1 100644 --- a/drivers/usb/serial/qcaux.c +++ b/drivers/usb/serial/qcaux.c @@ -36,6 +36,7 @@ #define UTSTARCOM_PRODUCT_UM175_V1 0x3712 #define UTSTARCOM_PRODUCT_UM175_V2 0x3714 #define UTSTARCOM_PRODUCT_UM175_ALLTEL 0x3715 +#define PANTECH_PRODUCT_UML190_VZW 0x3716 #define PANTECH_PRODUCT_UML290_VZW 0x3718 /* CMOTECH devices */ @@ -67,7 +68,11 @@ static struct usb_device_id id_table[] = { { USB_DEVICE_AND_INTERFACE_INFO(LG_VENDOR_ID, LG_PRODUCT_VX4400_6000, 0xff, 0xff, 0x00) }, { USB_DEVICE_AND_INTERFACE_INFO(SANYO_VENDOR_ID, SANYO_PRODUCT_KATANA_LX, 0xff, 0xff, 0x00) }, { USB_DEVICE_AND_INTERFACE_INFO(SAMSUNG_VENDOR_ID, SAMSUNG_PRODUCT_U520, 0xff, 0x00, 0x00) }, - { USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, PANTECH_PRODUCT_UML290_VZW, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, PANTECH_PRODUCT_UML190_VZW, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, PANTECH_PRODUCT_UML190_VZW, 0xff, 0xfe, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, PANTECH_PRODUCT_UML290_VZW, 0xff, 0xfd, 0xff) }, /* NMEA */ + { USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, PANTECH_PRODUCT_UML290_VZW, 0xff, 0xfe, 0xff) }, /* WMC */ + { USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, PANTECH_PRODUCT_UML290_VZW, 0xff, 0xff, 0xff) }, /* DIAG */ { }, }; MODULE_DEVICE_TABLE(usb, id_table); diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c index 1d5deee3be5..f98800f2324 100644 --- a/drivers/usb/serial/qcserial.c +++ b/drivers/usb/serial/qcserial.c @@ -36,6 +36,11 @@ static const struct usb_device_id id_table[] = { {USB_DEVICE(0x413c, 0x8171)}, /* Dell Gobi QDL device */ {USB_DEVICE(0x1410, 0xa001)}, /* Novatel Gobi Modem device */ {USB_DEVICE(0x1410, 0xa008)}, /* Novatel Gobi QDL device */ + {USB_DEVICE(0x1410, 0xa010)}, /* Novatel Gobi QDL device */ + {USB_DEVICE(0x1410, 0xa011)}, /* Novatel Gobi QDL device */ + {USB_DEVICE(0x1410, 0xa012)}, /* Novatel Gobi QDL device */ + {USB_DEVICE(0x1410, 0xa013)}, /* Novatel Gobi QDL device */ + {USB_DEVICE(0x1410, 0xa014)}, /* Novatel Gobi QDL device */ {USB_DEVICE(0x0b05, 0x1776)}, /* Asus Gobi Modem device */ {USB_DEVICE(0x0b05, 0x1774)}, /* Asus Gobi QDL device */ {USB_DEVICE(0x19d2, 0xfff3)}, /* ONDA Gobi Modem device */ @@ -86,7 +91,16 @@ static const struct usb_device_id id_table[] = { {USB_DEVICE(0x16d8, 0x8002)}, /* CMDTech Gobi 2000 Modem device (VU922) */ {USB_DEVICE(0x05c6, 0x9204)}, /* Gobi 2000 QDL device */ {USB_DEVICE(0x05c6, 0x9205)}, /* Gobi 2000 Modem device */ + + {USB_DEVICE(0x05c6, 0x920c)}, /* Gobi 3000 QDL */ + {USB_DEVICE(0x05c6, 0x920d)}, /* Gobi 3000 Composite */ + {USB_DEVICE(0x1410, 0xa020)}, /* Novatel Gobi 3000 QDL */ + {USB_DEVICE(0x1410, 0xa021)}, /* Novatel Gobi 3000 Composite */ + {USB_DEVICE(0x413c, 0x8193)}, /* Dell Gobi 3000 QDL */ + {USB_DEVICE(0x413c, 0x8194)}, /* Dell Gobi 3000 Composite */ {USB_DEVICE(0x1199, 0x9013)}, /* Sierra Wireless Gobi 3000 Modem device (MC8355) */ + {USB_DEVICE(0x12D1, 0x14F0)}, /* Sony Gobi 3000 QDL */ + {USB_DEVICE(0x12D1, 0x14F1)}, /* Sony Gobi 3000 Composite */ { } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, id_table); @@ -123,8 +137,6 @@ static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id) spin_lock_init(&data->susp_lock); - usb_enable_autosuspend(serial->dev); - switch (nintf) { case 1: /* QDL mode */ diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c index 8468eb769a2..75b838eff17 100644 --- a/drivers/usb/serial/ti_usb_3410_5052.c +++ b/drivers/usb/serial/ti_usb_3410_5052.c @@ -165,7 +165,7 @@ static unsigned int product_5052_count; /* the array dimension is the number of default entries plus */ /* TI_EXTRA_VID_PID_COUNT user defined entries plus 1 terminating */ /* null entry */ -static struct usb_device_id ti_id_table_3410[13+TI_EXTRA_VID_PID_COUNT+1] = { +static struct usb_device_id ti_id_table_3410[14+TI_EXTRA_VID_PID_COUNT+1] = { { USB_DEVICE(TI_VENDOR_ID, TI_3410_PRODUCT_ID) }, { USB_DEVICE(TI_VENDOR_ID, TI_3410_EZ430_ID) }, { USB_DEVICE(MTS_VENDOR_ID, MTS_GSM_NO_FW_PRODUCT_ID) }, @@ -179,6 +179,7 @@ static struct usb_device_id ti_id_table_3410[13+TI_EXTRA_VID_PID_COUNT+1] = { { USB_DEVICE(IBM_VENDOR_ID, IBM_4543_PRODUCT_ID) }, { USB_DEVICE(IBM_VENDOR_ID, IBM_454B_PRODUCT_ID) }, { USB_DEVICE(IBM_VENDOR_ID, IBM_454C_PRODUCT_ID) }, + { USB_DEVICE(ABBOTT_VENDOR_ID, ABBOTT_PRODUCT_ID) }, }; static struct usb_device_id ti_id_table_5052[5+TI_EXTRA_VID_PID_COUNT+1] = { @@ -188,7 +189,7 @@ static struct usb_device_id ti_id_table_5052[5+TI_EXTRA_VID_PID_COUNT+1] = { { USB_DEVICE(TI_VENDOR_ID, TI_5052_FIRMWARE_PRODUCT_ID) }, }; -static struct usb_device_id ti_id_table_combined[17+2*TI_EXTRA_VID_PID_COUNT+1] = { +static struct usb_device_id ti_id_table_combined[18+2*TI_EXTRA_VID_PID_COUNT+1] = { { USB_DEVICE(TI_VENDOR_ID, TI_3410_PRODUCT_ID) }, { USB_DEVICE(TI_VENDOR_ID, TI_3410_EZ430_ID) }, { USB_DEVICE(MTS_VENDOR_ID, MTS_GSM_NO_FW_PRODUCT_ID) }, @@ -206,6 +207,7 @@ static struct usb_device_id ti_id_table_combined[17+2*TI_EXTRA_VID_PID_COUNT+1] { USB_DEVICE(IBM_VENDOR_ID, IBM_4543_PRODUCT_ID) }, { USB_DEVICE(IBM_VENDOR_ID, IBM_454B_PRODUCT_ID) }, { USB_DEVICE(IBM_VENDOR_ID, IBM_454C_PRODUCT_ID) }, + { USB_DEVICE(ABBOTT_VENDOR_ID, ABBOTT_PRODUCT_ID) }, { } }; diff --git a/drivers/usb/serial/ti_usb_3410_5052.h b/drivers/usb/serial/ti_usb_3410_5052.h index 2aac1953993..f140f1b9d5c 100644 --- a/drivers/usb/serial/ti_usb_3410_5052.h +++ b/drivers/usb/serial/ti_usb_3410_5052.h @@ -49,6 +49,10 @@ #define MTS_MT9234ZBA_PRODUCT_ID 0xF115 #define MTS_MT9234ZBAOLD_PRODUCT_ID 0x0319 +/* Abbott Diabetics vendor and product ids */ +#define ABBOTT_VENDOR_ID 0x1a61 +#define ABBOTT_PRODUCT_ID 0x3410 + /* Commands */ #define TI_GET_VERSION 0x01 #define TI_GET_PORT_STATUS 0x02 diff --git a/drivers/usb/storage/realtek_cr.c b/drivers/usb/storage/realtek_cr.c index 1f62723ef1a..d32f72061c0 100644 --- a/drivers/usb/storage/realtek_cr.c +++ b/drivers/usb/storage/realtek_cr.c @@ -789,7 +789,7 @@ static void rts51x_suspend_timer_fn(unsigned long data) rts51x_set_stat(chip, RTS51X_STAT_SS); /* ignore mass storage interface's children */ pm_suspend_ignore_children(&us->pusb_intf->dev, true); - usb_autopm_put_interface(us->pusb_intf); + usb_autopm_put_interface_async(us->pusb_intf); US_DEBUGP("%s: RTS51X_STAT_SS 01," "intf->pm_usage_cnt:%d, power.usage:%d\n", __func__, diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c index 3dd7da9fd50..db51ba16dc0 100644 --- a/drivers/usb/storage/usb.c +++ b/drivers/usb/storage/usb.c @@ -788,15 +788,19 @@ static void quiesce_and_remove_host(struct us_data *us) struct Scsi_Host *host = us_to_host(us); /* If the device is really gone, cut short reset delays */ - if (us->pusb_dev->state == USB_STATE_NOTATTACHED) + if (us->pusb_dev->state == USB_STATE_NOTATTACHED) { set_bit(US_FLIDX_DISCONNECTING, &us->dflags); + wake_up(&us->delay_wait); + } - /* Prevent SCSI-scanning (if it hasn't started yet) - * and wait for the SCSI-scanning thread to stop. + /* Prevent SCSI scanning (if it hasn't started yet) + * or wait for the SCSI-scanning routine to stop. */ - set_bit(US_FLIDX_DONT_SCAN, &us->dflags); - wake_up(&us->delay_wait); - wait_for_completion(&us->scanning_done); + cancel_delayed_work_sync(&us->scan_dwork); + + /* Balance autopm calls if scanning was cancelled */ + if (test_bit(US_FLIDX_SCAN_PENDING, &us->dflags)) + usb_autopm_put_interface_no_suspend(us->pusb_intf); /* Removing the host will perform an orderly shutdown: caches * synchronized, disks spun down, etc. @@ -823,53 +827,28 @@ static void release_everything(struct us_data *us) scsi_host_put(us_to_host(us)); } -/* Thread to carry out delayed SCSI-device scanning */ -static int usb_stor_scan_thread(void * __us) +/* Delayed-work routine to carry out SCSI-device scanning */ +static void usb_stor_scan_dwork(struct work_struct *work) { - struct us_data *us = (struct us_data *)__us; + struct us_data *us = container_of(work, struct us_data, + scan_dwork.work); struct device *dev = &us->pusb_intf->dev; - dev_dbg(dev, "device found\n"); - - set_freezable(); + dev_dbg(dev, "starting scan\n"); - /* - * Wait for the timeout to expire or for a disconnect - * - * We can't freeze in this thread or we risk causing khubd to - * fail to freeze, but we can't be non-freezable either. Nor can - * khubd freeze while waiting for scanning to complete as it may - * hold the device lock, causing a hang when suspending devices. - * So instead of using wait_event_freezable(), explicitly test - * for (DONT_SCAN || freezing) in interruptible wait and proceed - * if any of DONT_SCAN, freezing or timeout has happened. - */ - if (delay_use > 0) { - dev_dbg(dev, "waiting for device to settle " - "before scanning\n"); - wait_event_interruptible_timeout(us->delay_wait, - test_bit(US_FLIDX_DONT_SCAN, &us->dflags) || - freezing(current), delay_use * HZ); + /* For bulk-only devices, determine the max LUN value */ + if (us->protocol == USB_PR_BULK && !(us->fflags & US_FL_SINGLE_LUN)) { + mutex_lock(&us->dev_mutex); + us->max_lun = usb_stor_Bulk_max_lun(us); + mutex_unlock(&us->dev_mutex); } + scsi_scan_host(us_to_host(us)); + dev_dbg(dev, "scan complete\n"); - /* If the device is still connected, perform the scanning */ - if (!test_bit(US_FLIDX_DONT_SCAN, &us->dflags)) { - - /* For bulk-only devices, determine the max LUN value */ - if (us->protocol == USB_PR_BULK && - !(us->fflags & US_FL_SINGLE_LUN)) { - mutex_lock(&us->dev_mutex); - us->max_lun = usb_stor_Bulk_max_lun(us); - mutex_unlock(&us->dev_mutex); - } - scsi_scan_host(us_to_host(us)); - dev_dbg(dev, "scan complete\n"); - - /* Should we unbind if no devices were detected? */ - } + /* Should we unbind if no devices were detected? */ usb_autopm_put_interface(us->pusb_intf); - complete_and_exit(&us->scanning_done, 0); + clear_bit(US_FLIDX_SCAN_PENDING, &us->dflags); } static unsigned int usb_stor_sg_tablesize(struct usb_interface *intf) @@ -916,7 +895,7 @@ int usb_stor_probe1(struct us_data **pus, init_completion(&us->cmnd_ready); init_completion(&(us->notify)); init_waitqueue_head(&us->delay_wait); - init_completion(&us->scanning_done); + INIT_DELAYED_WORK(&us->scan_dwork, usb_stor_scan_dwork); /* Associate the us_data structure with the USB device */ result = associate_dev(us, intf); @@ -947,7 +926,6 @@ EXPORT_SYMBOL_GPL(usb_stor_probe1); /* Second part of general USB mass-storage probing */ int usb_stor_probe2(struct us_data *us) { - struct task_struct *th; int result; struct device *dev = &us->pusb_intf->dev; @@ -988,20 +966,14 @@ int usb_stor_probe2(struct us_data *us) goto BadDevice; } - /* Start up the thread for delayed SCSI-device scanning */ - th = kthread_create(usb_stor_scan_thread, us, "usb-stor-scan"); - if (IS_ERR(th)) { - dev_warn(dev, - "Unable to start the device-scanning thread\n"); - complete(&us->scanning_done); - quiesce_and_remove_host(us); - result = PTR_ERR(th); - goto BadDevice; - } - + /* Submit the delayed_work for SCSI-device scanning */ usb_autopm_get_interface_no_resume(us->pusb_intf); - wake_up_process(th); + set_bit(US_FLIDX_SCAN_PENDING, &us->dflags); + if (delay_use > 0) + dev_dbg(dev, "waiting for device to settle before scanning\n"); + queue_delayed_work(system_freezable_wq, &us->scan_dwork, + delay_use * HZ); return 0; /* We come here if there are any problems */ diff --git a/drivers/usb/storage/usb.h b/drivers/usb/storage/usb.h index 7b0f2113632..75f70f04f37 100644 --- a/drivers/usb/storage/usb.h +++ b/drivers/usb/storage/usb.h @@ -47,6 +47,7 @@ #include <linux/blkdev.h> #include <linux/completion.h> #include <linux/mutex.h> +#include <linux/workqueue.h> #include <scsi/scsi_host.h> struct us_data; @@ -72,7 +73,7 @@ struct us_unusual_dev { #define US_FLIDX_DISCONNECTING 3 /* disconnect in progress */ #define US_FLIDX_RESETTING 4 /* device reset in progress */ #define US_FLIDX_TIMED_OUT 5 /* SCSI midlayer timed out */ -#define US_FLIDX_DONT_SCAN 6 /* don't scan (disconnect) */ +#define US_FLIDX_SCAN_PENDING 6 /* scanning not yet done */ #define US_FLIDX_REDO_READ10 7 /* redo READ(10) command */ #define US_FLIDX_READ10_WORKED 8 /* previous READ(10) succeeded */ @@ -147,8 +148,8 @@ struct us_data { /* mutual exclusion and synchronization structures */ struct completion cmnd_ready; /* to sleep thread on */ struct completion notify; /* thread begin/end */ - wait_queue_head_t delay_wait; /* wait during scan, reset */ - struct completion scanning_done; /* wait for scan thread */ + wait_queue_head_t delay_wait; /* wait during reset */ + struct delayed_work scan_dwork; /* for async scanning */ /* subdriver information */ void *extra; /* Any extra data */ diff --git a/drivers/usb/usb-skeleton.c b/drivers/usb/usb-skeleton.c index 8efeae24764..b4a71679c93 100644 --- a/drivers/usb/usb-skeleton.c +++ b/drivers/usb/usb-skeleton.c @@ -27,8 +27,6 @@ #define USB_SKEL_VENDOR_ID 0xfff0 #define USB_SKEL_PRODUCT_ID 0xfff0 -static DEFINE_MUTEX(skel_mutex); - /* table of devices that work with this driver */ static const struct usb_device_id skel_table[] = { { USB_DEVICE(USB_SKEL_VENDOR_ID, USB_SKEL_PRODUCT_ID) }, @@ -101,25 +99,18 @@ static int skel_open(struct inode *inode, struct file *file) goto exit; } - mutex_lock(&skel_mutex); dev = usb_get_intfdata(interface); if (!dev) { - mutex_unlock(&skel_mutex); retval = -ENODEV; goto exit; } /* increment our usage count for the device */ kref_get(&dev->kref); - mutex_unlock(&skel_mutex); /* lock the device to allow correctly handling errors * in resumption */ mutex_lock(&dev->io_mutex); - if (!dev->interface) { - retval = -ENODEV; - goto out_err; - } retval = usb_autopm_get_interface(interface); if (retval) @@ -127,11 +118,7 @@ static int skel_open(struct inode *inode, struct file *file) /* save our object in the file's private structure */ file->private_data = dev; - -out_err: mutex_unlock(&dev->io_mutex); - if (retval) - kref_put(&dev->kref, skel_delete); exit: return retval; @@ -611,6 +598,7 @@ static void skel_disconnect(struct usb_interface *interface) int minor = interface->minor; dev = usb_get_intfdata(interface); + usb_set_intfdata(interface, NULL); /* give back our minor */ usb_deregister_dev(interface, &skel_class); @@ -622,12 +610,8 @@ static void skel_disconnect(struct usb_interface *interface) usb_kill_anchored_urbs(&dev->submitted); - mutex_lock(&skel_mutex); - usb_set_intfdata(interface, NULL); - /* decrement our usage count */ kref_put(&dev->kref, skel_delete); - mutex_unlock(&skel_mutex); dev_info(&interface->dev, "USB Skeleton #%d now disconnected", minor); } diff --git a/drivers/usb/wusbcore/Kconfig b/drivers/usb/wusbcore/Kconfig index 0ead8826ec7..f29fdd7f6d7 100644 --- a/drivers/usb/wusbcore/Kconfig +++ b/drivers/usb/wusbcore/Kconfig @@ -6,7 +6,7 @@ config USB_WUSB depends on EXPERIMENTAL depends on USB depends on PCI - select UWB + depends on UWB select CRYPTO select CRYPTO_BLKCIPHER select CRYPTO_CBC |