diff options
Diffstat (limited to 'drivers/serial/sunsab.c')
-rw-r--r-- | drivers/serial/sunsab.c | 299 |
1 files changed, 144 insertions, 155 deletions
diff --git a/drivers/serial/sunsab.c b/drivers/serial/sunsab.c index 7da02d11c36..8d3c7e28ba7 100644 --- a/drivers/serial/sunsab.c +++ b/drivers/serial/sunsab.c @@ -1,7 +1,7 @@ /* sunsab.c: ASYNC Driver for the SIEMENS SAB82532 DUSCC. * * Copyright (C) 1997 Eddie C. Dost (ecd@skynet.be) - * Copyright (C) 2002 David S. Miller (davem@redhat.com) + * Copyright (C) 2002, 2006 David S. Miller (davem@davemloft.net) * * Rewrote buffer handling to use CIRC(Circular Buffer) macros. * Maxim Krasnyanskiy <maxk@qualcomm.com> @@ -12,7 +12,7 @@ * Theodore Ts'o <tytso@mit.edu>, 2001-Oct-12 * * Ported to new 2.5.x UART layer. - * David S. Miller <davem@redhat.com> + * David S. Miller <davem@davemloft.net> */ #include <linux/config.h> @@ -37,8 +37,8 @@ #include <asm/io.h> #include <asm/irq.h> -#include <asm/oplib.h> -#include <asm/ebus.h> +#include <asm/prom.h> +#include <asm/of_device.h> #if defined(CONFIG_SERIAL_SUNZILOG_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) #define SUPPORT_SYSRQ @@ -976,199 +976,188 @@ static inline struct console *SUNSAB_CONSOLE(void) #define sunsab_console_init() do { } while (0) #endif -static void __init for_each_sab_edev(void (*callback)(struct linux_ebus_device *, void *), void *arg) +static int __init sunsab_init_one(struct uart_sunsab_port *up, + struct of_device *op, + unsigned long offset, + int line) { - struct linux_ebus *ebus; - struct linux_ebus_device *edev = NULL; - - for_each_ebus(ebus) { - for_each_ebusdev(edev, ebus) { - if (!strcmp(edev->prom_node->name, "se")) { - callback(edev, arg); - continue; - } else if (!strcmp(edev->prom_node->name, "serial")) { - char *compat; - int clen; - - /* On RIO this can be an SE, check it. We could - * just check ebus->is_rio, but this is more portable. - */ - compat = of_get_property(edev->prom_node, - "compatible", &clen); - if (compat && clen > 0) { - if (strncmp(compat, "sab82532", 8) == 0) { - callback(edev, arg); - continue; - } - } - } - } - } -} + up->port.line = line; + up->port.dev = &op->dev; + + up->port.mapbase = op->resource[0].start + offset; + up->port.membase = of_ioremap(&op->resource[0], offset, + sizeof(union sab82532_async_regs), + "sab"); + if (!up->port.membase) + return -ENOMEM; + up->regs = (union sab82532_async_regs __iomem *) up->port.membase; -static void __init sab_count_callback(struct linux_ebus_device *edev, void *arg) -{ - int *count_p = arg; + up->port.irq = op->irqs[0]; - (*count_p)++; -} + up->port.fifosize = SAB82532_XMIT_FIFO_SIZE; + up->port.iotype = UPIO_MEM; -static void __init sab_attach_callback(struct linux_ebus_device *edev, void *arg) -{ - int *instance_p = arg; - struct uart_sunsab_port *up; - unsigned long regs, offset; - int i; + writeb(SAB82532_IPC_IC_ACT_LOW, &up->regs->w.ipc); - /* Note: ports are located in reverse order */ - regs = edev->resource[0].start; - offset = sizeof(union sab82532_async_regs); - for (i = 0; i < 2; i++) { - up = &sunsab_ports[(*instance_p * 2) + 1 - i]; + up->port.ops = &sunsab_pops; + up->port.type = PORT_SUNSAB; + up->port.uartclk = SAB_BASE_BAUD; - memset(up, 0, sizeof(*up)); - up->regs = ioremap(regs + offset, sizeof(union sab82532_async_regs)); - up->port.irq = edev->irqs[0]; - up->port.fifosize = SAB82532_XMIT_FIFO_SIZE; - up->port.mapbase = (unsigned long)up->regs; - up->port.iotype = UPIO_MEM; + up->type = readb(&up->regs->r.vstr) & 0x0f; + writeb(~((1 << 1) | (1 << 2) | (1 << 4)), &up->regs->w.pcr); + writeb(0xff, &up->regs->w.pim); + if ((up->port.line & 0x1) == 0) { + up->pvr_dsr_bit = (1 << 0); + up->pvr_dtr_bit = (1 << 1); + } else { + up->pvr_dsr_bit = (1 << 3); + up->pvr_dtr_bit = (1 << 2); + } + up->cached_pvr = (1 << 1) | (1 << 2) | (1 << 4); + writeb(up->cached_pvr, &up->regs->w.pvr); + up->cached_mode = readb(&up->regs->rw.mode); + up->cached_mode |= SAB82532_MODE_FRTS; + writeb(up->cached_mode, &up->regs->rw.mode); + up->cached_mode |= SAB82532_MODE_RTS; + writeb(up->cached_mode, &up->regs->rw.mode); - writeb(SAB82532_IPC_IC_ACT_LOW, &up->regs->w.ipc); + up->tec_timeout = SAB82532_MAX_TEC_TIMEOUT; + up->cec_timeout = SAB82532_MAX_CEC_TIMEOUT; - offset -= sizeof(union sab82532_async_regs); + if (!(up->port.line & 0x01)) { + int err; + + err = request_irq(up->port.irq, sunsab_interrupt, + SA_SHIRQ, "sab", up); + if (err) { + of_iounmap(up->port.membase, + sizeof(union sab82532_async_regs)); + return err; + } } - - (*instance_p)++; + + return 0; } -static int __init probe_for_sabs(void) +static int __devinit sab_probe(struct of_device *op, const struct of_device_id *match) { - int this_sab = 0; + static int inst; + struct uart_sunsab_port *up; + int err; + + up = &sunsab_ports[inst * 2]; + + err = sunsab_init_one(&up[0], op, + sizeof(union sab82532_async_regs), + (inst * 2) + 0); + if (err) + return err; + + err = sunsab_init_one(&up[0], op, 0, + (inst * 2) + 1); + if (err) { + of_iounmap(up[0].port.membase, + sizeof(union sab82532_async_regs)); + free_irq(up[0].port.irq, &up[0]); + return err; + } - /* Find device instances. */ - for_each_sab_edev(&sab_count_callback, &this_sab); - if (!this_sab) - return -ENODEV; + uart_add_one_port(&sunsab_reg, &up[0].port); + uart_add_one_port(&sunsab_reg, &up[1].port); - /* Allocate tables. */ - sunsab_ports = kmalloc(sizeof(struct uart_sunsab_port) * this_sab * 2, - GFP_KERNEL); - if (!sunsab_ports) - return -ENOMEM; + dev_set_drvdata(&op->dev, &up[0]); - num_channels = this_sab * 2; + inst++; - this_sab = 0; - for_each_sab_edev(&sab_attach_callback, &this_sab); return 0; } -static void __init sunsab_init_hw(void) +static void __devexit sab_remove_one(struct uart_sunsab_port *up) { - int i; - - for (i = 0; i < num_channels; i++) { - struct uart_sunsab_port *up = &sunsab_ports[i]; - - up->port.line = i; - up->port.ops = &sunsab_pops; - up->port.type = PORT_SUNSAB; - up->port.uartclk = SAB_BASE_BAUD; - - up->type = readb(&up->regs->r.vstr) & 0x0f; - writeb(~((1 << 1) | (1 << 2) | (1 << 4)), &up->regs->w.pcr); - writeb(0xff, &up->regs->w.pim); - if (up->port.line == 0) { - up->pvr_dsr_bit = (1 << 0); - up->pvr_dtr_bit = (1 << 1); - } else { - up->pvr_dsr_bit = (1 << 3); - up->pvr_dtr_bit = (1 << 2); - } - up->cached_pvr = (1 << 1) | (1 << 2) | (1 << 4); - writeb(up->cached_pvr, &up->regs->w.pvr); - up->cached_mode = readb(&up->regs->rw.mode); - up->cached_mode |= SAB82532_MODE_FRTS; - writeb(up->cached_mode, &up->regs->rw.mode); - up->cached_mode |= SAB82532_MODE_RTS; - writeb(up->cached_mode, &up->regs->rw.mode); - - up->tec_timeout = SAB82532_MAX_TEC_TIMEOUT; - up->cec_timeout = SAB82532_MAX_CEC_TIMEOUT; - - if (!(up->port.line & 0x01)) { - if (request_irq(up->port.irq, sunsab_interrupt, - SA_SHIRQ, "serial(sab82532)", up)) { - printk("sunsab%d: can't get IRQ %x\n", - i, up->port.irq); - continue; - } - } - } + uart_remove_one_port(&sunsab_reg, &up->port); + if (!(up->port.line & 1)) + free_irq(up->port.irq, up); + of_iounmap(up->port.membase, + sizeof(union sab82532_async_regs)); } -static int __init sunsab_init(void) +static int __devexit sab_remove(struct of_device *op) { - int ret = probe_for_sabs(); - int i; - - if (ret < 0) - return ret; + struct uart_sunsab_port *up = dev_get_drvdata(&op->dev); - sunsab_init_hw(); + sab_remove_one(&up[0]); + sab_remove_one(&up[1]); - sunsab_reg.minor = sunserial_current_minor; - sunsab_reg.nr = num_channels; + dev_set_drvdata(&op->dev, NULL); - ret = uart_register_driver(&sunsab_reg); - if (ret < 0) { - int i; + return 0; +} - for (i = 0; i < num_channels; i++) { - struct uart_sunsab_port *up = &sunsab_ports[i]; +static struct of_device_id sab_match[] = { + { + .name = "se", + }, + { + .name = "serial", + .compatible = "sab82532", + }, + {}, +}; +MODULE_DEVICE_TABLE(of, sab_match); - if (!(up->port.line & 0x01)) - free_irq(up->port.irq, up); - iounmap(up->regs); - } - kfree(sunsab_ports); - sunsab_ports = NULL; +static struct of_platform_driver sab_driver = { + .name = "sab", + .match_table = sab_match, + .probe = sab_probe, + .remove = __devexit_p(sab_remove), +}; - return ret; +static int __init sunsab_init(void) +{ + struct device_node *dp; + int err; + + num_channels = 0; + for_each_node_by_name(dp, "su") + num_channels += 2; + for_each_node_by_name(dp, "serial") { + if (of_device_is_compatible(dp, "sab82532")) + num_channels += 2; } - sunsab_reg.tty_driver->name_base = sunsab_reg.minor - 64; + if (num_channels) { + sunsab_ports = kzalloc(sizeof(struct uart_sunsab_port) * + num_channels, GFP_KERNEL); + if (!sunsab_ports) + return -ENOMEM; - sunsab_reg.cons = SUNSAB_CONSOLE(); + sunsab_reg.minor = sunserial_current_minor; + sunsab_reg.nr = num_channels; - sunserial_current_minor += num_channels; - - for (i = 0; i < num_channels; i++) { - struct uart_sunsab_port *up = &sunsab_ports[i]; + err = uart_register_driver(&sunsab_reg); + if (err) { + kfree(sunsab_ports); + sunsab_ports = NULL; - uart_add_one_port(&sunsab_reg, &up->port); + return err; + } + + sunsab_reg.tty_driver->name_base = sunsab_reg.minor - 64; + sunsab_reg.cons = SUNSAB_CONSOLE(); + sunserial_current_minor += num_channels; } - return 0; + return of_register_driver(&sab_driver, &of_bus_type); } static void __exit sunsab_exit(void) { - int i; - - for (i = 0; i < num_channels; i++) { - struct uart_sunsab_port *up = &sunsab_ports[i]; - - uart_remove_one_port(&sunsab_reg, &up->port); - - if (!(up->port.line & 0x01)) - free_irq(up->port.irq, up); - iounmap(up->regs); + of_unregister_driver(&sab_driver); + if (num_channels) { + sunserial_current_minor -= num_channels; + uart_unregister_driver(&sunsab_reg); } - sunserial_current_minor -= num_channels; - uart_unregister_driver(&sunsab_reg); - kfree(sunsab_ports); sunsab_ports = NULL; } |