diff options
Diffstat (limited to 'drivers/rapidio/switches/tsi57x.c')
-rw-r--r-- | drivers/rapidio/switches/tsi57x.c | 56 |
1 files changed, 24 insertions, 32 deletions
diff --git a/drivers/rapidio/switches/tsi57x.c b/drivers/rapidio/switches/tsi57x.c index 2003fb63c40..1a62934bfeb 100644 --- a/drivers/rapidio/switches/tsi57x.c +++ b/drivers/rapidio/switches/tsi57x.c @@ -158,48 +158,45 @@ tsi57x_get_domain(struct rio_mport *mport, u16 destid, u8 hopcount, static int tsi57x_em_init(struct rio_dev *rdev) { - struct rio_mport *mport = rdev->net->hport; - u16 destid = rdev->rswitch->destid; - u8 hopcount = rdev->rswitch->hopcount; u32 regval; int portnum; - pr_debug("TSI578 %s [%d:%d]\n", __func__, destid, hopcount); + pr_debug("TSI578 %s [%d:%d]\n", __func__, rdev->destid, rdev->hopcount); for (portnum = 0; portnum < RIO_GET_TOTAL_PORTS(rdev->swpinfo); portnum++) { /* Make sure that Port-Writes are enabled (for all ports) */ - rio_mport_read_config_32(mport, destid, hopcount, + rio_read_config_32(rdev, TSI578_SP_MODE(portnum), ®val); - rio_mport_write_config_32(mport, destid, hopcount, + rio_write_config_32(rdev, TSI578_SP_MODE(portnum), regval & ~TSI578_SP_MODE_PW_DIS); /* Clear all pending interrupts */ - rio_mport_read_config_32(mport, destid, hopcount, + rio_read_config_32(rdev, rdev->phys_efptr + RIO_PORT_N_ERR_STS_CSR(portnum), ®val); - rio_mport_write_config_32(mport, destid, hopcount, + rio_write_config_32(rdev, rdev->phys_efptr + RIO_PORT_N_ERR_STS_CSR(portnum), regval & 0x07120214); - rio_mport_read_config_32(mport, destid, hopcount, + rio_read_config_32(rdev, TSI578_SP_INT_STATUS(portnum), ®val); - rio_mport_write_config_32(mport, destid, hopcount, + rio_write_config_32(rdev, TSI578_SP_INT_STATUS(portnum), regval & 0x000700bd); /* Enable all interrupts to allow ports to send a port-write */ - rio_mport_read_config_32(mport, destid, hopcount, + rio_read_config_32(rdev, TSI578_SP_CTL_INDEP(portnum), ®val); - rio_mport_write_config_32(mport, destid, hopcount, + rio_write_config_32(rdev, TSI578_SP_CTL_INDEP(portnum), regval | 0x000b0000); /* Skip next (odd) port if the current port is in x4 mode */ - rio_mport_read_config_32(mport, destid, hopcount, + rio_read_config_32(rdev, rdev->phys_efptr + RIO_PORT_N_CTL_CSR(portnum), ®val); if ((regval & RIO_PORT_N_CTL_PWIDTH) == RIO_PORT_N_CTL_PWIDTH_4) @@ -207,7 +204,7 @@ tsi57x_em_init(struct rio_dev *rdev) } /* set TVAL = ~50us */ - rio_mport_write_config_32(mport, destid, hopcount, + rio_write_config_32(rdev, rdev->phys_efptr + RIO_PORT_LINKTO_CTL_CSR, 0x9a << 8); return 0; @@ -217,14 +214,12 @@ static int tsi57x_em_handler(struct rio_dev *rdev, u8 portnum) { struct rio_mport *mport = rdev->net->hport; - u16 destid = rdev->rswitch->destid; - u8 hopcount = rdev->rswitch->hopcount; u32 intstat, err_status; int sendcount, checkcount; u8 route_port; u32 regval; - rio_mport_read_config_32(mport, destid, hopcount, + rio_read_config_32(rdev, rdev->phys_efptr + RIO_PORT_N_ERR_STS_CSR(portnum), &err_status); @@ -232,15 +227,15 @@ tsi57x_em_handler(struct rio_dev *rdev, u8 portnum) (err_status & (RIO_PORT_N_ERR_STS_PW_OUT_ES | RIO_PORT_N_ERR_STS_PW_INP_ES))) { /* Remove any queued packets by locking/unlocking port */ - rio_mport_read_config_32(mport, destid, hopcount, + rio_read_config_32(rdev, rdev->phys_efptr + RIO_PORT_N_CTL_CSR(portnum), ®val); if (!(regval & RIO_PORT_N_CTL_LOCKOUT)) { - rio_mport_write_config_32(mport, destid, hopcount, + rio_write_config_32(rdev, rdev->phys_efptr + RIO_PORT_N_CTL_CSR(portnum), regval | RIO_PORT_N_CTL_LOCKOUT); udelay(50); - rio_mport_write_config_32(mport, destid, hopcount, + rio_write_config_32(rdev, rdev->phys_efptr + RIO_PORT_N_CTL_CSR(portnum), regval); } @@ -248,7 +243,7 @@ tsi57x_em_handler(struct rio_dev *rdev, u8 portnum) /* Read from link maintenance response register to clear * valid bit */ - rio_mport_read_config_32(mport, destid, hopcount, + rio_read_config_32(rdev, rdev->phys_efptr + RIO_PORT_N_MNT_RSP_CSR(portnum), ®val); @@ -257,13 +252,12 @@ tsi57x_em_handler(struct rio_dev *rdev, u8 portnum) */ sendcount = 3; while (sendcount) { - rio_mport_write_config_32(mport, destid, hopcount, + rio_write_config_32(rdev, TSI578_SP_CS_TX(portnum), 0x40fc8000); checkcount = 3; while (checkcount--) { udelay(50); - rio_mport_read_config_32( - mport, destid, hopcount, + rio_read_config_32(rdev, rdev->phys_efptr + RIO_PORT_N_MNT_RSP_CSR(portnum), ®val); @@ -277,25 +271,23 @@ tsi57x_em_handler(struct rio_dev *rdev, u8 portnum) exit_es: /* Clear implementation specific error status bits */ - rio_mport_read_config_32(mport, destid, hopcount, - TSI578_SP_INT_STATUS(portnum), &intstat); + rio_read_config_32(rdev, TSI578_SP_INT_STATUS(portnum), &intstat); pr_debug("TSI578[%x:%x] SP%d_INT_STATUS=0x%08x\n", - destid, hopcount, portnum, intstat); + rdev->destid, rdev->hopcount, portnum, intstat); if (intstat & 0x10000) { - rio_mport_read_config_32(mport, destid, hopcount, + rio_read_config_32(rdev, TSI578_SP_LUT_PEINF(portnum), ®val); regval = (mport->sys_size) ? (regval >> 16) : (regval >> 24); route_port = rdev->rswitch->route_table[regval]; pr_debug("RIO: TSI578[%s] P%d LUT Parity Error (destID=%d)\n", rio_name(rdev), portnum, regval); - tsi57x_route_add_entry(mport, destid, hopcount, + tsi57x_route_add_entry(mport, rdev->destid, rdev->hopcount, RIO_GLOBAL_TABLE, regval, route_port); } - rio_mport_write_config_32(mport, destid, hopcount, - TSI578_SP_INT_STATUS(portnum), - intstat & 0x000700bd); + rio_write_config_32(rdev, TSI578_SP_INT_STATUS(portnum), + intstat & 0x000700bd); return 0; } |