diff options
Diffstat (limited to 'drivers/net/wireless/iwlwifi/iwl-commands.h')
| -rw-r--r-- | drivers/net/wireless/iwlwifi/iwl-commands.h | 91 |
1 files changed, 82 insertions, 9 deletions
diff --git a/drivers/net/wireless/iwlwifi/iwl-commands.h b/drivers/net/wireless/iwlwifi/iwl-commands.h index 4afaf773aea..954bad60355 100644 --- a/drivers/net/wireless/iwlwifi/iwl-commands.h +++ b/drivers/net/wireless/iwlwifi/iwl-commands.h @@ -109,11 +109,12 @@ enum { REPLY_TX_LINK_QUALITY_CMD = 0x4e, /* 4965 only */ /* WiMAX coexistence */ - COEX_PRIORITY_TABLE_CMD = 0x5a, /*5000 only */ + COEX_PRIORITY_TABLE_CMD = 0x5a, /* for 5000 series and up */ COEX_MEDIUM_NOTIFICATION = 0x5b, COEX_EVENT_CMD = 0x5c, /* Calibration */ + TEMPERATURE_NOTIFICATION = 0x62, CALIBRATION_CFG_CMD = 0x65, CALIBRATION_RES_NOTIFICATION = 0x66, CALIBRATION_COMPLETE_NOTIFICATION = 0x67, @@ -148,7 +149,7 @@ enum { QUIET_NOTIFICATION = 0x96, /* not used */ REPLY_TX_PWR_TABLE_CMD = 0x97, REPLY_TX_POWER_DBM_CMD_V1 = 0x98, /* old version of API */ - TX_ANT_CONFIGURATION_CMD = 0x98, /* not used */ + TX_ANT_CONFIGURATION_CMD = 0x98, MEASURE_ABORT_NOTIFICATION = 0x99, /* not used */ /* Bluetooth device coexistence config command */ @@ -353,6 +354,9 @@ struct iwl3945_power_per_rate { #define POWER_TABLE_NUM_HT_OFDM_ENTRIES 32 #define POWER_TABLE_CCK_ENTRY 32 +#define IWL_PWR_NUM_HT_OFDM_ENTRIES 24 +#define IWL_PWR_CCK_ENTRIES 2 + /** * union iwl4965_tx_power_dual_stream * @@ -411,6 +415,16 @@ struct iwl5000_tx_power_dbm_cmd { u8 reserved; } __attribute__ ((packed)); +/** + * Command TX_ANT_CONFIGURATION_CMD = 0x98 + * This command is used to configure valid Tx antenna. + * By default uCode concludes the valid antenna according to the radio flavor. + * This command enables the driver to override/modify this conclusion. + */ +struct iwl_tx_ant_config_cmd { + __le32 valid; +} __attribute__ ((packed)); + /****************************************************************************** * (0a) * Alive and Error Commands & Responses: @@ -793,7 +807,7 @@ struct iwl3945_channel_switch_cmd { struct iwl3945_power_per_rate power[IWL_MAX_RATES]; } __attribute__ ((packed)); -struct iwl_channel_switch_cmd { +struct iwl4965_channel_switch_cmd { u8 band; u8 expect_beacon; __le16 channel; @@ -803,6 +817,48 @@ struct iwl_channel_switch_cmd { struct iwl4965_tx_power_db tx_power; } __attribute__ ((packed)); +/** + * struct iwl5000_channel_switch_cmd + * @band: 0- 5.2GHz, 1- 2.4GHz + * @expect_beacon: 0- resume transmits after channel switch + * 1- wait for beacon to resume transmits + * @channel: new channel number + * @rxon_flags: Rx on flags + * @rxon_filter_flags: filtering parameters + * @switch_time: switch time in extended beacon format + * @reserved: reserved bytes + */ +struct iwl5000_channel_switch_cmd { + u8 band; + u8 expect_beacon; + __le16 channel; + __le32 rxon_flags; + __le32 rxon_filter_flags; + __le32 switch_time; + __le32 reserved[2][IWL_PWR_NUM_HT_OFDM_ENTRIES + IWL_PWR_CCK_ENTRIES]; +} __attribute__ ((packed)); + +/** + * struct iwl6000_channel_switch_cmd + * @band: 0- 5.2GHz, 1- 2.4GHz + * @expect_beacon: 0- resume transmits after channel switch + * 1- wait for beacon to resume transmits + * @channel: new channel number + * @rxon_flags: Rx on flags + * @rxon_filter_flags: filtering parameters + * @switch_time: switch time in extended beacon format + * @reserved: reserved bytes + */ +struct iwl6000_channel_switch_cmd { + u8 band; + u8 expect_beacon; + __le16 channel; + __le32 rxon_flags; + __le32 rxon_filter_flags; + __le32 switch_time; + __le32 reserved[3][IWL_PWR_NUM_HT_OFDM_ENTRIES + IWL_PWR_CCK_ENTRIES]; +} __attribute__ ((packed)); + /* * CHANNEL_SWITCH_NOTIFICATION = 0x73 (notification only, not a command) */ @@ -2162,6 +2218,19 @@ struct iwl_link_quality_cmd { __le32 reserved2; } __attribute__ ((packed)); +#define BT_COEX_DISABLE (0x0) +#define BT_COEX_MODE_2W (0x1) +#define BT_COEX_MODE_3W (0x2) +#define BT_COEX_MODE_4W (0x3) + +#define BT_LEAD_TIME_MIN (0x0) +#define BT_LEAD_TIME_DEF (0x1E) +#define BT_LEAD_TIME_MAX (0xFF) + +#define BT_MAX_KILL_MIN (0x1) +#define BT_MAX_KILL_DEF (0x5) +#define BT_MAX_KILL_MAX (0xFF) + /* * REPLY_BT_CONFIG = 0x9b (command, has simple generic response) * @@ -3237,12 +3306,6 @@ struct iwl_missed_beacon_notif { * Lower values mean higher energy; this means making sure that the value * in HD_MIN_ENERGY_CCK_DET_INDEX is at or *above* "Max cck energy". * - * Driver should set the following entries to fixed values: - * - * HD_MIN_ENERGY_OFDM_DET_INDEX 100 - * HD_BARKER_CORR_TH_ADD_MIN_INDEX 190 - * HD_BARKER_CORR_TH_ADD_MIN_MRC_INDEX 390 - * HD_OFDM_ENERGY_TH_IN_INDEX 62 */ /* @@ -3495,6 +3558,16 @@ struct iwl_wimax_coex_cmd { *****************************************************************************/ struct iwl_rx_packet { + /* + * The first 4 bytes of the RX frame header contain both the RX frame + * size and some flags. + * Bit fields: + * 31: flag flush RB request + * 30: flag ignore TC (terminal counter) request + * 29: flag fast IRQ request + * 28-14: Reserved + * 13-00: RX frame size + */ __le32 len_n_flags; struct iwl_cmd_header hdr; union { |