summaryrefslogtreecommitdiff
path: root/drivers/mmc/core
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mmc/core')
-rw-r--r--drivers/mmc/core/core.c18
-rw-r--r--drivers/mmc/core/mmc.c5
-rw-r--r--drivers/mmc/core/sdio.c4
-rw-r--r--drivers/mmc/core/sdio_bus.c23
4 files changed, 44 insertions, 6 deletions
diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
index 9290bb51a06..c40396f2320 100644
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -2289,6 +2289,19 @@ int _mmc_detect_card_removed(struct mmc_host *host)
return 1;
ret = host->bus_ops->alive(host);
+
+ /*
+ * Card detect status and alive check may be out of sync if card is
+ * removed slowly, when card detect switch changes while card/slot
+ * pads are still contacted in hardware (refer to "SD Card Mechanical
+ * Addendum, Appendix C: Card Detection Switch"). So reschedule a
+ * detect work 200ms later for this case.
+ */
+ if (!ret && host->ops->get_cd && !host->ops->get_cd(host)) {
+ mmc_detect_change(host, msecs_to_jiffies(200));
+ pr_debug("%s: card removed too slowly\n", mmc_hostname(host));
+ }
+
if (ret) {
mmc_card_set_removed(host->card);
pr_debug("%s: card remove detected\n", mmc_hostname(host));
@@ -2403,7 +2416,10 @@ void mmc_start_host(struct mmc_host *host)
{
host->f_init = max(freqs[0], host->f_min);
host->rescan_disable = 0;
- mmc_power_up(host);
+ if (host->caps2 & MMC_CAP2_NO_PRESCAN_POWERUP)
+ mmc_power_off(host);
+ else
+ mmc_power_up(host);
mmc_detect_change(host, 0);
}
diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
index c8f3d6e0684..0cbd1effe96 100644
--- a/drivers/mmc/core/mmc.c
+++ b/drivers/mmc/core/mmc.c
@@ -96,6 +96,7 @@ static int mmc_decode_cid(struct mmc_card *card)
card->cid.prod_name[3] = UNSTUFF_BITS(resp, 72, 8);
card->cid.prod_name[4] = UNSTUFF_BITS(resp, 64, 8);
card->cid.prod_name[5] = UNSTUFF_BITS(resp, 56, 8);
+ card->cid.prv = UNSTUFF_BITS(resp, 48, 8);
card->cid.serial = UNSTUFF_BITS(resp, 16, 32);
card->cid.month = UNSTUFF_BITS(resp, 12, 4);
card->cid.year = UNSTUFF_BITS(resp, 8, 4) + 1997;
@@ -368,13 +369,13 @@ static int mmc_read_ext_csd(struct mmc_card *card, u8 *ext_csd)
ext_csd[EXT_CSD_SEC_FEATURE_SUPPORT];
card->ext_csd.raw_trim_mult =
ext_csd[EXT_CSD_TRIM_MULT];
+ card->ext_csd.raw_partition_support = ext_csd[EXT_CSD_PARTITION_SUPPORT];
if (card->ext_csd.rev >= 4) {
/*
* Enhanced area feature support -- check whether the eMMC
* card has the Enhanced area enabled. If so, export enhanced
* area offset and size to user by adding sysfs interface.
*/
- card->ext_csd.raw_partition_support = ext_csd[EXT_CSD_PARTITION_SUPPORT];
if ((ext_csd[EXT_CSD_PARTITION_SUPPORT] & 0x2) &&
(ext_csd[EXT_CSD_PARTITION_ATTRIBUTE] & 0x1)) {
hc_erase_grp_sz =
@@ -627,6 +628,7 @@ MMC_DEV_ATTR(hwrev, "0x%x\n", card->cid.hwrev);
MMC_DEV_ATTR(manfid, "0x%06x\n", card->cid.manfid);
MMC_DEV_ATTR(name, "%s\n", card->cid.prod_name);
MMC_DEV_ATTR(oemid, "0x%04x\n", card->cid.oemid);
+MMC_DEV_ATTR(prv, "0x%x\n", card->cid.prv);
MMC_DEV_ATTR(serial, "0x%08x\n", card->cid.serial);
MMC_DEV_ATTR(enhanced_area_offset, "%llu\n",
card->ext_csd.enhanced_area_offset);
@@ -645,6 +647,7 @@ static struct attribute *mmc_std_attrs[] = {
&dev_attr_manfid.attr,
&dev_attr_name.attr,
&dev_attr_oemid.attr,
+ &dev_attr_prv.attr,
&dev_attr_serial.attr,
&dev_attr_enhanced_area_offset.attr,
&dev_attr_enhanced_area_size.attr,
diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c
index aa0719a4dfd..6889a821c1d 100644
--- a/drivers/mmc/core/sdio.c
+++ b/drivers/mmc/core/sdio.c
@@ -861,8 +861,10 @@ static void mmc_sdio_detect(struct mmc_host *host)
/* Make sure card is powered before detecting it */
if (host->caps & MMC_CAP_POWER_OFF_CARD) {
err = pm_runtime_get_sync(&host->card->dev);
- if (err < 0)
+ if (err < 0) {
+ pm_runtime_put_noidle(&host->card->dev);
goto out;
+ }
}
mmc_claim_host(host);
diff --git a/drivers/mmc/core/sdio_bus.c b/drivers/mmc/core/sdio_bus.c
index 5e57048e2c1..546c67c2bbb 100644
--- a/drivers/mmc/core/sdio_bus.c
+++ b/drivers/mmc/core/sdio_bus.c
@@ -16,6 +16,7 @@
#include <linux/export.h>
#include <linux/slab.h>
#include <linux/pm_runtime.h>
+#include <linux/acpi.h>
#include <linux/mmc/card.h>
#include <linux/mmc/host.h>
@@ -137,7 +138,7 @@ static int sdio_bus_probe(struct device *dev)
if (func->card->host->caps & MMC_CAP_POWER_OFF_CARD) {
ret = pm_runtime_get_sync(dev);
if (ret < 0)
- goto out;
+ goto disable_runtimepm;
}
/* Set the default block size so the driver is sure it's something
@@ -157,7 +158,6 @@ static int sdio_bus_probe(struct device *dev)
disable_runtimepm:
if (func->card->host->caps & MMC_CAP_POWER_OFF_CARD)
pm_runtime_put_noidle(dev);
-out:
return ret;
}
@@ -299,6 +299,19 @@ struct sdio_func *sdio_alloc_func(struct mmc_card *card)
return func;
}
+#ifdef CONFIG_ACPI
+static void sdio_acpi_set_handle(struct sdio_func *func)
+{
+ struct mmc_host *host = func->card->host;
+ u64 addr = (host->slotno << 16) | func->num;
+
+ ACPI_HANDLE_SET(&func->dev,
+ acpi_get_child(ACPI_HANDLE(host->parent), addr));
+}
+#else
+static inline void sdio_acpi_set_handle(struct sdio_func *func) {}
+#endif
+
/*
* Register a new SDIO function with the driver model.
*/
@@ -308,9 +321,12 @@ int sdio_add_func(struct sdio_func *func)
dev_set_name(&func->dev, "%s:%d", mmc_card_id(func->card), func->num);
+ sdio_acpi_set_handle(func);
ret = device_add(&func->dev);
- if (ret == 0)
+ if (ret == 0) {
sdio_func_set_present(func);
+ acpi_dev_pm_attach(&func->dev, false);
+ }
return ret;
}
@@ -326,6 +342,7 @@ void sdio_remove_func(struct sdio_func *func)
if (!sdio_func_present(func))
return;
+ acpi_dev_pm_detach(&func->dev, false);
device_del(&func->dev);
put_device(&func->dev);
}
generated by cgit v1.2.3 (git 2.25.1) at 2024-06-24 20:37:15 +0000