diff options
Diffstat (limited to 'drivers/ide')
-rw-r--r-- | drivers/ide/Kconfig | 1 | ||||
-rw-r--r-- | drivers/ide/ide-disk.c | 2 | ||||
-rw-r--r-- | drivers/ide/ide-dma.c | 2 | ||||
-rw-r--r-- | drivers/ide/ide-iops.c | 2 | ||||
-rw-r--r-- | drivers/ide/ide.c | 5 | ||||
-rw-r--r-- | drivers/ide/legacy/ide-cs.c | 81 | ||||
-rw-r--r-- | drivers/ide/pci/generic.c | 8 | ||||
-rw-r--r-- | drivers/ide/pci/it821x.c | 11 |
8 files changed, 35 insertions, 77 deletions
diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig index 53bba41f29b..b6fb167e20f 100644 --- a/drivers/ide/Kconfig +++ b/drivers/ide/Kconfig @@ -682,6 +682,7 @@ config BLK_DEV_SVWKS config BLK_DEV_SGIIOC4 tristate "Silicon Graphics IOC4 chipset ATA/ATAPI support" depends on (IA64_SGI_SN2 || IA64_GENERIC) && SGI_IOC4 + select IDEPCI_SHARE_IRQ help This driver adds PIO & MultiMode DMA-2 support for the SGI IOC4 chipset, which has one channel and can support two devices. diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c index f712e4cfd9d..7cf3eb02352 100644 --- a/drivers/ide/ide-disk.c +++ b/drivers/ide/ide-disk.c @@ -776,7 +776,7 @@ static void update_ordered(ide_drive_t *drive) * not available so we don't need to recheck that. */ capacity = idedisk_capacity(drive); - barrier = ide_id_has_flush_cache(id) && + barrier = ide_id_has_flush_cache(id) && !drive->noflush && (drive->addressing == 0 || capacity <= (1ULL << 28) || ide_id_has_flush_cache_ext(id)); diff --git a/drivers/ide/ide-dma.c b/drivers/ide/ide-dma.c index 98918fb6b2c..7c3a13e1cf6 100644 --- a/drivers/ide/ide-dma.c +++ b/drivers/ide/ide-dma.c @@ -750,7 +750,7 @@ void ide_dma_verbose(ide_drive_t *drive) goto bug_dma_off; printk(", DMA"); } else if (id->field_valid & 1) { - printk(", BUG"); + goto bug_dma_off; } return; bug_dma_off: diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c index 657165297dc..77703acaec1 100644 --- a/drivers/ide/ide-iops.c +++ b/drivers/ide/ide-iops.c @@ -23,6 +23,7 @@ #include <linux/hdreg.h> #include <linux/ide.h> #include <linux/bitops.h> +#include <linux/nmi.h> #include <asm/byteorder.h> #include <asm/irq.h> @@ -1243,6 +1244,7 @@ int ide_wait_not_busy(ide_hwif_t *hwif, unsigned long timeout) if (stat == 0xff) return -ENODEV; touch_softlockup_watchdog(); + touch_nmi_watchdog(); } return -EBUSY; } diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c index 05fbd9298db..defd4b4bd37 100644 --- a/drivers/ide/ide.c +++ b/drivers/ide/ide.c @@ -1539,7 +1539,7 @@ static int __init ide_setup(char *s) const char *hd_words[] = { "none", "noprobe", "nowerr", "cdrom", "serialize", "autotune", "noautotune", "minus8", "swapdata", "bswap", - "minus11", "remap", "remap63", "scsi", NULL }; + "noflush", "remap", "remap63", "scsi", NULL }; unit = s[2] - 'a'; hw = unit / MAX_DRIVES; unit = unit % MAX_DRIVES; @@ -1578,6 +1578,9 @@ static int __init ide_setup(char *s) case -10: /* "bswap" */ drive->bswap = 1; goto done; + case -11: /* noflush */ + drive->noflush = 1; + goto done; case -12: /* "remap" */ drive->remap_0_to_1 = 1; goto done; diff --git a/drivers/ide/legacy/ide-cs.c b/drivers/ide/legacy/ide-cs.c index b7e459e4f28..602797a4420 100644 --- a/drivers/ide/legacy/ide-cs.c +++ b/drivers/ide/legacy/ide-cs.c @@ -146,16 +146,7 @@ static void ide_detach(struct pcmcia_device *link) kfree(link->priv); } /* ide_detach */ -static void idecs_mmio_fixup(ide_hwif_t *hwif) -{ - default_hwif_mmiops(hwif); - hwif->mmio = 2; - - ide_undecoded_slave(hwif); -} - -static int idecs_register(unsigned long io, unsigned long ctl, - unsigned long irq, struct pcmcia_device *handle, int is_mmio) +static int idecs_register(unsigned long io, unsigned long ctl, unsigned long irq, struct pcmcia_device *handle) { hw_regs_t hw; memset(&hw, 0, sizeof(hw)); @@ -163,19 +154,7 @@ static int idecs_register(unsigned long io, unsigned long ctl, hw.irq = irq; hw.chipset = ide_pci; hw.dev = &handle->dev; - - if(is_mmio) - return ide_register_hw_with_fixup(&hw, NULL, idecs_mmio_fixup); - else - return ide_register_hw_with_fixup(&hw, NULL, ide_undecoded_slave); -} - -void outb_io(unsigned char value, unsigned long port) { - outb(value, port); -} - -void outb_mem(unsigned char value, unsigned long port) { - writeb(value, (void __iomem *) port); + return ide_register_hw_with_fixup(&hw, NULL, ide_undecoded_slave); } /*====================================================================== @@ -201,8 +180,7 @@ static int ide_config(struct pcmcia_device *link) } *stk = NULL; cistpl_cftable_entry_t *cfg; int i, pass, last_ret = 0, last_fn = 0, hd, is_kme = 0; - unsigned long io_base, ctl_base, is_mmio, try_slave; - void (*my_outb)(unsigned char, unsigned long); + unsigned long io_base, ctl_base; DEBUG(0, "ide_config(0x%p)\n", link); @@ -232,7 +210,7 @@ static int ide_config(struct pcmcia_device *link) /* Not sure if this is right... look up the current Vcc */ CS_CHECK(GetConfigurationInfo, pcmcia_get_configuration_info(link, &stk->conf)); - pass = io_base = ctl_base = is_mmio = try_slave = 0; + pass = io_base = ctl_base = 0; tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY; tuple.Attributes = 0; CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple)); @@ -280,45 +258,11 @@ static int ide_config(struct pcmcia_device *link) goto next_entry; io_base = link->io.BasePort1; ctl_base = link->io.BasePort1 + 0x0e; - - if (io->win[0].len >= 0x20) - try_slave = 1; - } else goto next_entry; /* If we've got this far, we're done */ break; } - if ((cfg->mem.nwin > 0) || (stk->dflt.mem.nwin > 0)) { - win_req_t req; - memreq_t map; - cistpl_mem_t *mem = (cfg->mem.nwin) ? &cfg->mem : &stk->dflt.mem; - - if (mem->win[0].len < 16) - goto next_entry; - - req.Attributes = WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM; - req.Attributes |= WIN_ENABLE; - req.Base = mem->win[0].host_addr; - req.Size = 0; - - req.AccessSpeed = 0; - if (pcmcia_request_window(&link, &req, &link->win) != 0) - goto next_entry; - map.Page = 0; map.CardOffset = mem->win[0].card_addr; - if (pcmcia_map_mem_page(link->win, &map) != 0) - goto next_entry; - - io_base = (unsigned long) ioremap(req.Base, req.Size); - ctl_base = io_base + 0x0e; - is_mmio = 1; - - if (mem->win[0].len >= 0x20) - try_slave = 1; - - break; - } - next_entry: if (cfg->flags & CISTPL_CFTABLE_DEFAULT) memcpy(&stk->dflt, cfg, sizeof(stk->dflt)); @@ -334,26 +278,21 @@ static int ide_config(struct pcmcia_device *link) CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq)); CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf)); - if(is_mmio) - my_outb = outb_mem; - else - my_outb = outb_io; - /* disable drive interrupts during IDE probe */ - my_outb(0x02, ctl_base); + outb(0x02, ctl_base); /* special setup for KXLC005 card */ if (is_kme) - my_outb(0x81, ctl_base+1); + outb(0x81, ctl_base+1); /* retry registration in case device is still spinning up */ for (hd = -1, i = 0; i < 10; i++) { - hd = idecs_register(io_base, ctl_base, link->irq.AssignedIRQ, link, is_mmio); + hd = idecs_register(io_base, ctl_base, link->irq.AssignedIRQ, link); if (hd >= 0) break; - if (try_slave) { - my_outb(0x02, ctl_base + 0x10); + if (link->io.NumPorts1 == 0x20) { + outb(0x02, ctl_base + 0x10); hd = idecs_register(io_base + 0x10, ctl_base + 0x10, - link->irq.AssignedIRQ, link, is_mmio); + link->irq.AssignedIRQ, link); if (hd >= 0) { io_base += 0x10; ctl_base += 0x10; diff --git a/drivers/ide/pci/generic.c b/drivers/ide/pci/generic.c index f82e8210972..2f962cfa3f7 100644 --- a/drivers/ide/pci/generic.c +++ b/drivers/ide/pci/generic.c @@ -212,6 +212,9 @@ static int __devinit generic_init_one(struct pci_dev *dev, const struct pci_devi (!(PCI_FUNC(dev->devfn) & 1))) goto out; + if (dev->vendor == PCI_VENDOR_ID_JMICRON && PCI_FUNC(dev->devfn) != 1) + goto out; + pci_read_config_word(dev, PCI_COMMAND, &command); if (!(command & PCI_COMMAND_IO)) { printk(KERN_INFO "Skipping disabled %s IDE controller.\n", d->name); @@ -239,6 +242,11 @@ static struct pci_device_id generic_pci_tbl[] = { { PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO_1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 12}, { PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO_2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 13}, { PCI_VENDOR_ID_NETCELL,PCI_DEVICE_ID_REVOLUTION, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 14}, + { PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB361, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 15}, + { PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB363, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 16}, + { PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB365, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 17}, + { PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB366, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 18}, + { PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB368, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 19}, /* Must come last. If you add entries adjust this table appropriately and the init_one code */ { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_IDE << 8, 0xFFFFFF00UL, 0}, { 0, }, diff --git a/drivers/ide/pci/it821x.c b/drivers/ide/pci/it821x.c index 3cb04424d35..e9bad185968 100644 --- a/drivers/ide/pci/it821x.c +++ b/drivers/ide/pci/it821x.c @@ -498,9 +498,14 @@ static int config_chipset_for_dma (ide_drive_t *drive) { u8 speed = ide_dma_speed(drive, it821x_ratemask(drive)); - config_it821x_chipset_for_pio(drive, !speed); - it821x_tune_chipset(drive, speed); - return ide_dma_enable(drive); + if (speed) { + config_it821x_chipset_for_pio(drive, 0); + it821x_tune_chipset(drive, speed); + + return ide_dma_enable(drive); + } + + return 0; } /** |