summaryrefslogtreecommitdiff
path: root/drivers/hwmon
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/hwmon')
-rw-r--r--drivers/hwmon/Kconfig5
-rw-r--r--drivers/hwmon/w83627ehf.c148
2 files changed, 125 insertions, 28 deletions
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 279a509dca9..9ec854ae118 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -1282,7 +1282,7 @@ config SENSORS_W83627HF
will be called w83627hf.
config SENSORS_W83627EHF
- tristate "Winbond W83627EHF/EHG/DHG, W83667HG, NCT6775F, NCT6776F"
+ tristate "Winbond W83627EHF/EHG/DHG/UHG, W83667HG, NCT6775F, NCT6776F"
depends on !PPC
select HWMON_VID
help
@@ -1292,7 +1292,8 @@ config SENSORS_W83627EHF
This driver also supports the W83627EHG, which is the lead-free
version of the W83627EHF, and the W83627DHG, which is a similar
chip suited for specific Intel processors that use PECI such as
- the Core 2 Duo.
+ the Core 2 Duo. And also the W83627UHG, which is a stripped down
+ version of the W83627DHG (as far as hardware monitoring goes.)
This driver also supports Nuvoton W83667HG, W83667HG-B, NCT6775F
(also known as W83667HG-I), and NCT6776F.
diff --git a/drivers/hwmon/w83627ehf.c b/drivers/hwmon/w83627ehf.c
index 81534cbd0af..483cb268781 100644
--- a/drivers/hwmon/w83627ehf.c
+++ b/drivers/hwmon/w83627ehf.c
@@ -1,7 +1,7 @@
/*
w83627ehf - Driver for the hardware monitoring functionality of
the Winbond W83627EHF Super-I/O chip
- Copyright (C) 2005 Jean Delvare <khali@linux-fr.org>
+ Copyright (C) 2005-2011 Jean Delvare <khali@linux-fr.org>
Copyright (C) 2006 Yuan Mu (Winbond),
Rudolf Marek <r.marek@assembler.cz>
David Hubbard <david.c.hubbard@gmail.com>
@@ -39,6 +39,7 @@
0x8860 0xa1
w83627dhg 9 5 4 3 0xa020 0xc1 0x5ca3
w83627dhg-p 9 5 4 3 0xb070 0xc1 0x5ca3
+ w83627uhg 8 2 2 2 0xa230 0xc1 0x5ca3
w83667hg 9 5 3 3 0xa510 0xc1 0x5ca3
w83667hg-b 9 5 3 4 0xb350 0xc1 0x5ca3
nct6775f 9 4 3 9 0xb470 0xc1 0x5ca3
@@ -61,14 +62,17 @@
#include <linux/io.h>
#include "lm75.h"
-enum kinds { w83627ehf, w83627dhg, w83627dhg_p, w83667hg, w83667hg_b, nct6775,
- nct6776 };
+enum kinds {
+ w83627ehf, w83627dhg, w83627dhg_p, w83627uhg,
+ w83667hg, w83667hg_b, nct6775, nct6776,
+};
/* used to set data->name = w83627ehf_device_names[data->sio_kind] */
static const char * const w83627ehf_device_names[] = {
"w83627ehf",
"w83627dhg",
"w83627dhg",
+ "w83627uhg",
"w83667hg",
"w83667hg",
"nct6775",
@@ -104,6 +108,7 @@ MODULE_PARM_DESC(fan_debounce, "Enable debouncing for fan RPM signal");
#define SIO_W83627EHG_ID 0x8860
#define SIO_W83627DHG_ID 0xa020
#define SIO_W83627DHG_P_ID 0xb070
+#define SIO_W83627UHG_ID 0xa230
#define SIO_W83667HG_ID 0xa510
#define SIO_W83667HG_B_ID 0xb350
#define SIO_NCT6775_ID 0xb470
@@ -388,18 +393,23 @@ div_from_reg(u8 reg)
return 1 << reg;
}
-/* Some of analog inputs have internal scaling (2x), 8mV is ADC LSB */
-
-static u8 scale_in[10] = { 8, 8, 16, 16, 8, 8, 8, 16, 16, 8 };
+/* Some of the voltage inputs have internal scaling, the tables below
+ * contain 8 (the ADC LSB in mV) * scaling factor * 100 */
+static const u16 scale_in_common[10] = {
+ 800, 800, 1600, 1600, 800, 800, 800, 1600, 1600, 800
+};
+static const u16 scale_in_w83627uhg[9] = {
+ 800, 800, 3328, 3424, 800, 800, 0, 3328, 3400
+};
-static inline long in_from_reg(u8 reg, u8 nr)
+static inline long in_from_reg(u8 reg, u8 nr, const u16 *scale_in)
{
- return reg * scale_in[nr];
+ return DIV_ROUND_CLOSEST(reg * scale_in[nr], 100);
}
-static inline u8 in_to_reg(u32 val, u8 nr)
+static inline u8 in_to_reg(u32 val, u8 nr, const u16 *scale_in)
{
- return SENSORS_LIMIT(((val + (scale_in[nr] / 2)) / scale_in[nr]), 0,
+ return SENSORS_LIMIT(DIV_ROUND_CLOSEST(val * 100, scale_in[nr]), 0,
255);
}
@@ -430,6 +440,7 @@ struct w83627ehf_data {
const u16 *REG_FAN_STOP_TIME;
const u16 *REG_FAN_MAX_OUTPUT;
const u16 *REG_FAN_STEP_OUTPUT;
+ const u16 *scale_in;
unsigned int (*fan_from_reg)(u16 reg, unsigned int divreg);
unsigned int (*fan_from_reg_min)(u16 reg, unsigned int divreg);
@@ -481,7 +492,8 @@ struct w83627ehf_data {
u8 vrm;
u16 have_temp;
- u8 in6_skip;
+ u8 in6_skip:1;
+ u8 temp3_val_only:1;
};
struct w83627ehf_sio_data {
@@ -907,7 +919,8 @@ show_##reg(struct device *dev, struct device_attribute *attr, \
struct sensor_device_attribute *sensor_attr = \
to_sensor_dev_attr(attr); \
int nr = sensor_attr->index; \
- return sprintf(buf, "%ld\n", in_from_reg(data->reg[nr], nr)); \
+ return sprintf(buf, "%ld\n", in_from_reg(data->reg[nr], nr, \
+ data->scale_in)); \
}
show_in_reg(in)
show_in_reg(in_min)
@@ -928,7 +941,7 @@ store_in_##reg(struct device *dev, struct device_attribute *attr, \
if (err < 0) \
return err; \
mutex_lock(&data->update_lock); \
- data->in_##reg[nr] = in_to_reg(val, nr); \
+ data->in_##reg[nr] = in_to_reg(val, nr, data->scale_in); \
w83627ehf_write_value(data, W83627EHF_REG_IN_##REG(nr), \
data->in_##reg[nr]); \
mutex_unlock(&data->update_lock); \
@@ -1617,25 +1630,28 @@ static struct sensor_device_attribute sda_sf3_arrays_fan4[] = {
store_fan_step_output, 3),
};
+static struct sensor_device_attribute sda_sf3_arrays_fan3[] = {
+ SENSOR_ATTR(pwm3_stop_time, S_IWUSR | S_IRUGO, show_fan_stop_time,
+ store_fan_stop_time, 2),
+ SENSOR_ATTR(pwm3_start_output, S_IWUSR | S_IRUGO, show_fan_start_output,
+ store_fan_start_output, 2),
+ SENSOR_ATTR(pwm3_stop_output, S_IWUSR | S_IRUGO, show_fan_stop_output,
+ store_fan_stop_output, 2),
+};
+
static struct sensor_device_attribute sda_sf3_arrays[] = {
SENSOR_ATTR(pwm1_stop_time, S_IWUSR | S_IRUGO, show_fan_stop_time,
store_fan_stop_time, 0),
SENSOR_ATTR(pwm2_stop_time, S_IWUSR | S_IRUGO, show_fan_stop_time,
store_fan_stop_time, 1),
- SENSOR_ATTR(pwm3_stop_time, S_IWUSR | S_IRUGO, show_fan_stop_time,
- store_fan_stop_time, 2),
SENSOR_ATTR(pwm1_start_output, S_IWUSR | S_IRUGO, show_fan_start_output,
store_fan_start_output, 0),
SENSOR_ATTR(pwm2_start_output, S_IWUSR | S_IRUGO, show_fan_start_output,
store_fan_start_output, 1),
- SENSOR_ATTR(pwm3_start_output, S_IWUSR | S_IRUGO, show_fan_start_output,
- store_fan_start_output, 2),
SENSOR_ATTR(pwm1_stop_output, S_IWUSR | S_IRUGO, show_fan_stop_output,
store_fan_stop_output, 0),
SENSOR_ATTR(pwm2_stop_output, S_IWUSR | S_IRUGO, show_fan_stop_output,
store_fan_stop_output, 1),
- SENSOR_ATTR(pwm3_stop_output, S_IWUSR | S_IRUGO, show_fan_stop_output,
- store_fan_stop_output, 2),
};
@@ -1728,6 +1744,8 @@ static void w83627ehf_device_remove_files(struct device *dev)
data->REG_FAN_STEP_OUTPUT[attr->index] != 0xff)
device_remove_file(dev, &attr->dev_attr);
}
+ for (i = 0; i < ARRAY_SIZE(sda_sf3_arrays_fan3); i++)
+ device_remove_file(dev, &sda_sf3_arrays_fan3[i].dev_attr);
for (i = 0; i < ARRAY_SIZE(sda_sf3_arrays_fan4); i++)
device_remove_file(dev, &sda_sf3_arrays_fan4[i].dev_attr);
for (i = 0; i < data->in_num; i++) {
@@ -1756,6 +1774,8 @@ static void w83627ehf_device_remove_files(struct device *dev)
continue;
device_remove_file(dev, &sda_temp_input[i].dev_attr);
device_remove_file(dev, &sda_temp_label[i].dev_attr);
+ if (i == 2 && data->temp3_val_only)
+ continue;
device_remove_file(dev, &sda_temp_max[i].dev_attr);
device_remove_file(dev, &sda_temp_max_hyst[i].dev_attr);
if (i > 2)
@@ -1808,6 +1828,9 @@ static inline void __devinit w83627ehf_init_device(struct w83627ehf_data *data,
case w83627ehf:
diode = w83627ehf_read_value(data, W83627EHF_REG_DIODE);
break;
+ case w83627uhg:
+ diode = 0x00;
+ break;
default:
diode = 0x70;
}
@@ -1871,6 +1894,13 @@ w83627ehf_check_fan_inputs(const struct w83627ehf_sio_data *sio_data,
{
int fan3pin, fan4pin, fan4min, fan5pin, regval;
+ /* The W83627UHG is simple, only two fan inputs, no config */
+ if (sio_data->kind == w83627uhg) {
+ data->has_fan = 0x03; /* fan1 and fan2 */
+ data->has_fan_min = 0x03;
+ return;
+ }
+
superio_enter(sio_data->sioreg);
/* fan4 and fan5 share some pins with the GPIO and serial flash */
@@ -1962,11 +1992,21 @@ static int __devinit w83627ehf_probe(struct platform_device *pdev)
/* 627EHG and 627EHF have 10 voltage inputs; 627DHG and 667HG have 9 */
data->in_num = (sio_data->kind == w83627ehf) ? 10 : 9;
- /* 667HG, NCT6775F, and NCT6776F have 3 pwms */
- data->pwm_num = (sio_data->kind == w83667hg
- || sio_data->kind == w83667hg_b
- || sio_data->kind == nct6775
- || sio_data->kind == nct6776) ? 3 : 4;
+ /* 667HG, NCT6775F, and NCT6776F have 3 pwms, and 627UHG has only 2 */
+ switch (sio_data->kind) {
+ default:
+ data->pwm_num = 4;
+ break;
+ case w83667hg:
+ case w83667hg_b:
+ case nct6775:
+ case nct6776:
+ data->pwm_num = 3;
+ break;
+ case w83627uhg:
+ data->pwm_num = 2;
+ break;
+ }
/* Default to 3 temperature inputs, code below will adjust as needed */
data->have_temp = 0x07;
@@ -2085,6 +2125,42 @@ static int __devinit w83627ehf_probe(struct platform_device *pdev)
data->in6_skip = 1;
data->temp_label = w83667hg_b_temp_label;
+ } else if (sio_data->kind == w83627uhg) {
+ u8 reg;
+
+ w83627ehf_set_temp_reg_ehf(data, 3);
+
+ /*
+ * Temperature sources for temp1 and temp2 are selected with
+ * bank 0, registers 0x49 and 0x4a.
+ */
+ data->temp_src[0] = 0; /* SYSTIN */
+ reg = w83627ehf_read_value(data, 0x49) & 0x07;
+ /* Adjust to have the same mapping as other source registers */
+ if (reg == 0)
+ data->temp_src[1]++;
+ else if (reg >= 2 && reg <= 5)
+ data->temp_src[1] += 2;
+ else /* should never happen */
+ data->have_temp &= ~(1 << 1);
+ reg = w83627ehf_read_value(data, 0x4a);
+ data->temp_src[2] = reg >> 5;
+
+ /*
+ * Skip temp3 if source is invalid or the same as temp1
+ * or temp2.
+ */
+ if (data->temp_src[2] == 2 || data->temp_src[2] == 3 ||
+ data->temp_src[2] == data->temp_src[0] ||
+ ((data->have_temp & (1 << 1)) &&
+ data->temp_src[2] == data->temp_src[1]))
+ data->have_temp &= ~(1 << 2);
+ else
+ data->temp3_val_only = 1; /* No limit regs */
+
+ data->in6_skip = 1; /* No VIN3 */
+
+ data->temp_label = w83667hg_b_temp_label;
} else {
w83627ehf_set_temp_reg_ehf(data, 3);
@@ -2162,6 +2238,12 @@ static int __devinit w83627ehf_probe(struct platform_device *pdev)
W83627EHF_REG_FAN_STEP_OUTPUT_COMMON;
}
+ /* Setup input voltage scaling factors */
+ if (sio_data->kind == w83627uhg)
+ data->scale_in = scale_in_w83627uhg;
+ else
+ data->scale_in = scale_in_common;
+
/* Initialize the chip */
w83627ehf_init_device(data, sio_data->kind);
@@ -2178,7 +2260,7 @@ static int __devinit w83627ehf_probe(struct platform_device *pdev)
err = device_create_file(dev, &dev_attr_cpu0_vid);
if (err)
goto exit_release;
- } else {
+ } else if (sio_data->kind != w83627uhg) {
superio_select(sio_data->sioreg, W83627EHF_LD_HWM);
if (superio_inb(sio_data->sioreg, SIO_REG_VID_CTRL) & 0x80) {
/* Set VID input sensibility if needed. In theory the
@@ -2268,7 +2350,14 @@ static int __devinit w83627ehf_probe(struct platform_device *pdev)
goto exit_remove;
}
}
- /* if fan4 is enabled create the sf3 files for it */
+ /* if fan3 and fan4 are enabled create the sf3 files for them */
+ if ((data->has_fan & (1 << 2)) && data->pwm_num >= 3)
+ for (i = 0; i < ARRAY_SIZE(sda_sf3_arrays_fan3); i++) {
+ err = device_create_file(dev,
+ &sda_sf3_arrays_fan3[i].dev_attr);
+ if (err)
+ goto exit_remove;
+ }
if ((data->has_fan & (1 << 3)) && data->pwm_num >= 4)
for (i = 0; i < ARRAY_SIZE(sda_sf3_arrays_fan4); i++) {
err = device_create_file(dev,
@@ -2336,6 +2425,8 @@ static int __devinit w83627ehf_probe(struct platform_device *pdev)
if (err)
goto exit_remove;
}
+ if (i == 2 && data->temp3_val_only)
+ continue;
if (data->reg_temp_over[i]) {
err = device_create_file(dev,
&sda_temp_max[i].dev_attr);
@@ -2419,6 +2510,7 @@ static int __init w83627ehf_find(int sioaddr, unsigned short *addr,
static const char __initdata sio_name_W83627EHG[] = "W83627EHG";
static const char __initdata sio_name_W83627DHG[] = "W83627DHG";
static const char __initdata sio_name_W83627DHG_P[] = "W83627DHG-P";
+ static const char __initdata sio_name_W83627UHG[] = "W83627UHG";
static const char __initdata sio_name_W83667HG[] = "W83667HG";
static const char __initdata sio_name_W83667HG_B[] = "W83667HG-B";
static const char __initdata sio_name_NCT6775[] = "NCT6775F";
@@ -2451,6 +2543,10 @@ static int __init w83627ehf_find(int sioaddr, unsigned short *addr,
sio_data->kind = w83627dhg_p;
sio_name = sio_name_W83627DHG_P;
break;
+ case SIO_W83627UHG_ID:
+ sio_data->kind = w83627uhg;
+ sio_name = sio_name_W83627UHG;
+ break;
case SIO_W83667HG_ID:
sio_data->kind = w83667hg;
sio_name = sio_name_W83667HG;
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-30 02:49:27 +0000