diff options
Diffstat (limited to 'drivers/gpu/arm/mali400/r4p0_rel0/linux/mali_osk_profiling.c')
-rw-r--r-- | drivers/gpu/arm/mali400/r4p0_rel0/linux/mali_osk_profiling.c | 308 |
1 files changed, 308 insertions, 0 deletions
diff --git a/drivers/gpu/arm/mali400/r4p0_rel0/linux/mali_osk_profiling.c b/drivers/gpu/arm/mali400/r4p0_rel0/linux/mali_osk_profiling.c new file mode 100644 index 00000000000..38c6fba33bb --- /dev/null +++ b/drivers/gpu/arm/mali400/r4p0_rel0/linux/mali_osk_profiling.c @@ -0,0 +1,308 @@ +/* + * Copyright (C) 2012 ARM Limited. All rights reserved. + * + * This program is free software and is provided to you under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation, and any use by you of this program is subject to the terms of such GNU licence. + * + * A copy of the licence is included with the program, and can also be obtained from Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + */ + +#include <linux/module.h> + +#include <mali_profiling_gator_api.h> +#include "mali_kernel_common.h" +#include "mali_osk.h" +#include "mali_ukk.h" +#include "mali_uk_types.h" +#include "mali_osk_profiling.h" +#include "mali_linux_trace.h" +#include "mali_gp.h" +#include "mali_pp.h" +#include "mali_pp_scheduler.h" +#include "mali_l2_cache.h" +#include "mali_user_settings_db.h" + +_mali_osk_errcode_t _mali_osk_profiling_init(mali_bool auto_start) +{ + if (MALI_TRUE == auto_start) { + mali_set_user_setting(_MALI_UK_USER_SETTING_SW_EVENTS_ENABLE, MALI_TRUE); + } + + return _MALI_OSK_ERR_OK; +} + +void _mali_osk_profiling_term(void) +{ + /* Nothing to do */ +} + +_mali_osk_errcode_t _mali_osk_profiling_start(u32 * limit) +{ + /* Nothing to do */ + return _MALI_OSK_ERR_OK; +} + +_mali_osk_errcode_t _mali_osk_profiling_stop(u32 *count) +{ + /* Nothing to do */ + return _MALI_OSK_ERR_OK; +} + +u32 _mali_osk_profiling_get_count(void) +{ + return 0; +} + +_mali_osk_errcode_t _mali_osk_profiling_get_event(u32 index, u64* timestamp, u32* event_id, u32 data[5]) +{ + /* Nothing to do */ + return _MALI_OSK_ERR_OK; +} + +_mali_osk_errcode_t _mali_osk_profiling_clear(void) +{ + /* Nothing to do */ + return _MALI_OSK_ERR_OK; +} + +mali_bool _mali_osk_profiling_is_recording(void) +{ + return MALI_FALSE; +} + +mali_bool _mali_osk_profiling_have_recording(void) +{ + return MALI_FALSE; +} + +void _mali_osk_profiling_report_sw_counters(u32 *counters) +{ + trace_mali_sw_counters(_mali_osk_get_pid(), _mali_osk_get_tid(), NULL, counters); +} + + +_mali_osk_errcode_t _mali_ukk_profiling_start(_mali_uk_profiling_start_s *args) +{ + return _mali_osk_profiling_start(&args->limit); +} + +_mali_osk_errcode_t _mali_ukk_profiling_add_event(_mali_uk_profiling_add_event_s *args) +{ + /* Always add process and thread identificator in the first two data elements for events from user space */ + _mali_osk_profiling_add_event(args->event_id, _mali_osk_get_pid(), _mali_osk_get_tid(), args->data[2], args->data[3], args->data[4]); + + return _MALI_OSK_ERR_OK; +} + +_mali_osk_errcode_t _mali_ukk_profiling_stop(_mali_uk_profiling_stop_s *args) +{ + return _mali_osk_profiling_stop(&args->count); +} + +_mali_osk_errcode_t _mali_ukk_profiling_get_event(_mali_uk_profiling_get_event_s *args) +{ + return _mali_osk_profiling_get_event(args->index, &args->timestamp, &args->event_id, args->data); +} + +_mali_osk_errcode_t _mali_ukk_profiling_clear(_mali_uk_profiling_clear_s *args) +{ + return _mali_osk_profiling_clear(); +} + +_mali_osk_errcode_t _mali_ukk_sw_counters_report(_mali_uk_sw_counters_report_s *args) +{ + _mali_osk_profiling_report_sw_counters(args->counters); + return _MALI_OSK_ERR_OK; +} + +/** + * Called by gator.ko to set HW counters + * + * @param counter_id The counter ID. + * @param event_id Event ID that the counter should count (HW counter value from TRM). + * + * @return 1 on success, 0 on failure. + */ +int _mali_profiling_set_event(u32 counter_id, s32 event_id) +{ + if (COUNTER_VP_0_C0 == counter_id) { + mali_gp_job_set_gp_counter_src0(event_id); + } else if (COUNTER_VP_0_C1 == counter_id) { + mali_gp_job_set_gp_counter_src1(event_id); + } else if (COUNTER_FP_0_C0 <= counter_id && COUNTER_FP_7_C1 >= counter_id) { + /* + * Two compatibility notes for this function: + * + * 1) Previously the DDK allowed per core counters. + * + * This did not make much sense on Mali-450 with the "virtual PP core" concept, + * so this option was removed, and only the same pair of HW counters was allowed on all cores, + * beginning with r3p2 release. + * + * Starting with r4p0, it is now possible to set different HW counters for the different sub jobs. + * This should be almost the same, since sub job 0 is designed to run on core 0, + * sub job 1 on core 1, and so on. + * + * The scheduling of PP sub jobs is not predictable, and this often led to situations where core 0 ran 2 + * sub jobs, while for instance core 1 ran zero. Having the counters set per sub job would thus increase + * the predictability of the returned data (as you would be guaranteed data for all the selected HW counters). + * + * PS: Core scaling needs to be disabled in order to use this reliably (goes for both solutions). + * + * The framework/#defines with Gator still indicates that the counter is for a particular core, + * but this is internally used as a sub job ID instead (no translation needed). + * + * 2) Global/default vs per sub job counters + * + * Releases before r3p2 had only per PP core counters. + * r3p2 releases had only one set of default/global counters which applied to all PP cores + * Starting with r4p0, we have both a set of default/global counters, + * and individual counters per sub job (equal to per core). + * + * To keep compatibility with Gator/DS-5/streamline, the following scheme is used: + * + * r3p2 release; only counters set for core 0 is handled, + * this is applied as the default/global set of counters, and will thus affect all cores. + * + * r4p0 release; counters set for core 0 is applied as both the global/default set of counters, + * and counters for sub job 0. + * Counters set for core 1-7 is only applied for the corresponding sub job. + * + * This should allow the DS-5/Streamline GUI to have a simple mode where it only allows setting the + * values for core 0, and thus this will be applied to all PP sub jobs/cores. + * Advanced mode will also be supported, where individual pairs of HW counters can be selected. + * + * The GUI will (until it is updated) still refer to cores instead of sub jobs, but this is probably + * something we can live with! + * + * Mali-450 note: Each job is not divided into a deterministic number of sub jobs, as the HW DLBU + * automatically distributes the load between whatever number of cores is available at this particular time. + * A normal PP job on Mali-450 is thus considered a single (virtual) job, and it will thus only be possible + * to use a single pair of HW counters (even if the job ran on multiple PP cores). + * In other words, only the global/default pair of PP HW counters will be used for normal Mali-450 jobs. + */ + u32 sub_job = (counter_id - COUNTER_FP_0_C0) >> 1; + u32 counter_src = (counter_id - COUNTER_FP_0_C0) & 1; + if (0 == counter_src) { + mali_pp_job_set_pp_counter_sub_job_src0(sub_job, event_id); + if (0 == sub_job) { + mali_pp_job_set_pp_counter_global_src0(event_id); + } + } else { + mali_pp_job_set_pp_counter_sub_job_src1(sub_job, event_id); + if (0 == sub_job) { + mali_pp_job_set_pp_counter_global_src1(event_id); + } + } + } else if (COUNTER_L2_0_C0 <= counter_id && COUNTER_L2_2_C1 >= counter_id) { + u32 core_id = (counter_id - COUNTER_L2_0_C0) >> 1; + struct mali_l2_cache_core* l2_cache_core = mali_l2_cache_core_get_glob_l2_core(core_id); + + if (NULL != l2_cache_core) { + u32 counter_src = (counter_id - COUNTER_L2_0_C0) & 1; + if (0 == counter_src) { + mali_l2_cache_core_set_counter_src0(l2_cache_core, event_id); + } else { + mali_l2_cache_core_set_counter_src1(l2_cache_core, event_id); + } + } + } else { + return 0; /* Failure, unknown event */ + } + + return 1; /* success */ +} + +/** + * Called by gator.ko to retrieve the L2 cache counter values for all L2 cache cores. + * The L2 cache counters are unique in that they are polled by gator, rather than being + * transmitted via the tracepoint mechanism. + * + * @param values Pointer to a _mali_profiling_l2_counter_values structure where + * the counter sources and values will be output + * @return 0 if all went well; otherwise, return the mask with the bits set for the powered off cores + */ +u32 _mali_profiling_get_l2_counters(_mali_profiling_l2_counter_values *values) +{ + struct mali_l2_cache_core *l2_cache; + u32 l2_cores_num = mali_l2_cache_core_get_glob_num_l2_cores(); + u32 i; + u32 ret = 0; + + MALI_DEBUG_ASSERT(l2_cores_num <= 3); + + for (i = 0; i < l2_cores_num; i++) { + l2_cache = mali_l2_cache_core_get_glob_l2_core(i); + + if (NULL == l2_cache) { + continue; + } + + if (MALI_TRUE == mali_l2_cache_lock_power_state(l2_cache)) { + /* It is now safe to access the L2 cache core in order to retrieve the counters */ + mali_l2_cache_core_get_counter_values(l2_cache, + &values->cores[i].source0, + &values->cores[i].value0, + &values->cores[i].source1, + &values->cores[i].value1); + } else { + /* The core was not available, set the right bit in the mask. */ + ret |= (1 << i); + } + mali_l2_cache_unlock_power_state(l2_cache); + } + + return ret; +} + +/** + * Called by gator to control the production of profiling information at runtime. + */ +void _mali_profiling_control(u32 action, u32 value) +{ + switch(action) { + case FBDUMP_CONTROL_ENABLE: + mali_set_user_setting(_MALI_UK_USER_SETTING_COLORBUFFER_CAPTURE_ENABLED, (value == 0 ? MALI_FALSE : MALI_TRUE)); + break; + case FBDUMP_CONTROL_RATE: + mali_set_user_setting(_MALI_UK_USER_SETTING_BUFFER_CAPTURE_N_FRAMES, value); + break; + case SW_COUNTER_ENABLE: + mali_set_user_setting(_MALI_UK_USER_SETTING_SW_COUNTER_ENABLED, value); + break; + case FBDUMP_CONTROL_RESIZE_FACTOR: + mali_set_user_setting(_MALI_UK_USER_SETTING_BUFFER_CAPTURE_RESIZE_FACTOR, value); + break; + default: + break; /* Ignore unimplemented actions */ + } +} + +/** + * Called by gator to get mali api version. + */ +u32 _mali_profiling_get_api_version(void) +{ + return MALI_PROFILING_API_VERSION; +} + +/** +* Called by gator to get the data about Mali instance in use: +* product id, version, number of cores +*/ +void _mali_profiling_get_mali_version(struct _mali_profiling_mali_version *values) +{ + values->mali_product_id = (u32)mali_kernel_core_get_product_id(); + values->mali_version_major = mali_kernel_core_get_gpu_major_version(); + values->mali_version_minor = mali_kernel_core_get_gpu_minor_version(); + values->num_of_l2_cores = mali_l2_cache_core_get_glob_num_l2_cores(); + values->num_of_fp_cores = mali_pp_scheduler_get_num_cores_total(); + values->num_of_vp_cores = 1; +} + +EXPORT_SYMBOL(_mali_profiling_set_event); +EXPORT_SYMBOL(_mali_profiling_get_l2_counters); +EXPORT_SYMBOL(_mali_profiling_control); +EXPORT_SYMBOL(_mali_profiling_get_api_version); +EXPORT_SYMBOL(_mali_profiling_get_mali_version); |