summaryrefslogtreecommitdiff
path: root/drivers/cpufreq/exynos-cpufreq.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/cpufreq/exynos-cpufreq.c')
-rw-r--r--drivers/cpufreq/exynos-cpufreq.c290
1 files changed, 290 insertions, 0 deletions
diff --git a/drivers/cpufreq/exynos-cpufreq.c b/drivers/cpufreq/exynos-cpufreq.c
new file mode 100644
index 00000000000..5467879ea07
--- /dev/null
+++ b/drivers/cpufreq/exynos-cpufreq.c
@@ -0,0 +1,290 @@
+/*
+ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * EXYNOS - CPU frequency scaling support for EXYNOS series
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/regulator/consumer.h>
+#include <linux/cpufreq.h>
+#include <linux/suspend.h>
+
+#include <mach/cpufreq.h>
+
+#include <plat/cpu.h>
+
+static struct exynos_dvfs_info *exynos_info;
+
+static struct regulator *arm_regulator;
+static struct cpufreq_freqs freqs;
+
+static unsigned int locking_frequency;
+static bool frequency_locked;
+static DEFINE_MUTEX(cpufreq_lock);
+
+int exynos_verify_speed(struct cpufreq_policy *policy)
+{
+ return cpufreq_frequency_table_verify(policy,
+ exynos_info->freq_table);
+}
+
+unsigned int exynos_getspeed(unsigned int cpu)
+{
+ return clk_get_rate(exynos_info->cpu_clk) / 1000;
+}
+
+static int exynos_target(struct cpufreq_policy *policy,
+ unsigned int target_freq,
+ unsigned int relation)
+{
+ unsigned int index, old_index;
+ unsigned int arm_volt, safe_arm_volt = 0;
+ int ret = 0;
+ struct cpufreq_frequency_table *freq_table = exynos_info->freq_table;
+ unsigned int *volt_table = exynos_info->volt_table;
+ unsigned int mpll_freq_khz = exynos_info->mpll_freq_khz;
+
+ mutex_lock(&cpufreq_lock);
+
+ freqs.old = policy->cur;
+
+ if (frequency_locked && target_freq != locking_frequency) {
+ ret = -EAGAIN;
+ goto out;
+ }
+
+ if (cpufreq_frequency_table_target(policy, freq_table,
+ freqs.old, relation, &old_index)) {
+ ret = -EINVAL;
+ goto out;
+ }
+
+ if (cpufreq_frequency_table_target(policy, freq_table,
+ target_freq, relation, &index)) {
+ ret = -EINVAL;
+ goto out;
+ }
+
+ freqs.new = freq_table[index].frequency;
+ freqs.cpu = policy->cpu;
+
+ /*
+ * ARM clock source will be changed APLL to MPLL temporary
+ * To support this level, need to control regulator for
+ * required voltage level
+ */
+ if (exynos_info->need_apll_change != NULL) {
+ if (exynos_info->need_apll_change(old_index, index) &&
+ (freq_table[index].frequency < mpll_freq_khz) &&
+ (freq_table[old_index].frequency < mpll_freq_khz))
+ safe_arm_volt = volt_table[exynos_info->pll_safe_idx];
+ }
+ arm_volt = volt_table[index];
+
+ cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+
+ /* When the new frequency is higher than current frequency */
+ if ((freqs.new > freqs.old) && !safe_arm_volt) {
+ /* Firstly, voltage up to increase frequency */
+ regulator_set_voltage(arm_regulator, arm_volt,
+ arm_volt);
+ }
+
+ if (safe_arm_volt)
+ regulator_set_voltage(arm_regulator, safe_arm_volt,
+ safe_arm_volt);
+ if (freqs.new != freqs.old)
+ exynos_info->set_freq(old_index, index);
+
+ cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+
+ /* When the new frequency is lower than current frequency */
+ if ((freqs.new < freqs.old) ||
+ ((freqs.new > freqs.old) && safe_arm_volt)) {
+ /* down the voltage after frequency change */
+ regulator_set_voltage(arm_regulator, arm_volt,
+ arm_volt);
+ }
+
+out:
+ mutex_unlock(&cpufreq_lock);
+
+ return ret;
+}
+
+#ifdef CONFIG_PM
+static int exynos_cpufreq_suspend(struct cpufreq_policy *policy)
+{
+ return 0;
+}
+
+static int exynos_cpufreq_resume(struct cpufreq_policy *policy)
+{
+ return 0;
+}
+#endif
+
+/**
+ * exynos_cpufreq_pm_notifier - block CPUFREQ's activities in suspend-resume
+ * context
+ * @notifier
+ * @pm_event
+ * @v
+ *
+ * While frequency_locked == true, target() ignores every frequency but
+ * locking_frequency. The locking_frequency value is the initial frequency,
+ * which is set by the bootloader. In order to eliminate possible
+ * inconsistency in clock values, we save and restore frequencies during
+ * suspend and resume and block CPUFREQ activities. Note that the standard
+ * suspend/resume cannot be used as they are too deep (syscore_ops) for
+ * regulator actions.
+ */
+static int exynos_cpufreq_pm_notifier(struct notifier_block *notifier,
+ unsigned long pm_event, void *v)
+{
+ struct cpufreq_policy *policy = cpufreq_cpu_get(0); /* boot CPU */
+ static unsigned int saved_frequency;
+ unsigned int temp;
+
+ mutex_lock(&cpufreq_lock);
+ switch (pm_event) {
+ case PM_SUSPEND_PREPARE:
+ if (frequency_locked)
+ goto out;
+
+ frequency_locked = true;
+
+ if (locking_frequency) {
+ saved_frequency = exynos_getspeed(0);
+
+ mutex_unlock(&cpufreq_lock);
+ exynos_target(policy, locking_frequency,
+ CPUFREQ_RELATION_H);
+ mutex_lock(&cpufreq_lock);
+ }
+ break;
+
+ case PM_POST_SUSPEND:
+ if (saved_frequency) {
+ /*
+ * While frequency_locked, only locking_frequency
+ * is valid for target(). In order to use
+ * saved_frequency while keeping frequency_locked,
+ * we temporarly overwrite locking_frequency.
+ */
+ temp = locking_frequency;
+ locking_frequency = saved_frequency;
+
+ mutex_unlock(&cpufreq_lock);
+ exynos_target(policy, locking_frequency,
+ CPUFREQ_RELATION_H);
+ mutex_lock(&cpufreq_lock);
+
+ locking_frequency = temp;
+ }
+ frequency_locked = false;
+ break;
+ }
+out:
+ mutex_unlock(&cpufreq_lock);
+
+ return NOTIFY_OK;
+}
+
+static struct notifier_block exynos_cpufreq_nb = {
+ .notifier_call = exynos_cpufreq_pm_notifier,
+};
+
+static int exynos_cpufreq_cpu_init(struct cpufreq_policy *policy)
+{
+ policy->cur = policy->min = policy->max = exynos_getspeed(policy->cpu);
+
+ cpufreq_frequency_table_get_attr(exynos_info->freq_table, policy->cpu);
+
+ /* set the transition latency value */
+ policy->cpuinfo.transition_latency = 100000;
+
+ /*
+ * EXYNOS4 multi-core processors has 2 cores
+ * that the frequency cannot be set independently.
+ * Each cpu is bound to the same speed.
+ * So the affected cpu is all of the cpus.
+ */
+ if (num_online_cpus() == 1) {
+ cpumask_copy(policy->related_cpus, cpu_possible_mask);
+ cpumask_copy(policy->cpus, cpu_online_mask);
+ } else {
+ cpumask_setall(policy->cpus);
+ }
+
+ return cpufreq_frequency_table_cpuinfo(policy, exynos_info->freq_table);
+}
+
+static struct cpufreq_driver exynos_driver = {
+ .flags = CPUFREQ_STICKY,
+ .verify = exynos_verify_speed,
+ .target = exynos_target,
+ .get = exynos_getspeed,
+ .init = exynos_cpufreq_cpu_init,
+ .name = "exynos_cpufreq",
+#ifdef CONFIG_PM
+ .suspend = exynos_cpufreq_suspend,
+ .resume = exynos_cpufreq_resume,
+#endif
+};
+
+static int __init exynos_cpufreq_init(void)
+{
+ int ret = -EINVAL;
+
+ exynos_info = kzalloc(sizeof(struct exynos_dvfs_info), GFP_KERNEL);
+ if (!exynos_info)
+ return -ENOMEM;
+
+ if (soc_is_exynos4210())
+ ret = exynos4210_cpufreq_init(exynos_info);
+ else
+ pr_err("%s: CPU type not found\n", __func__);
+
+ if (ret)
+ goto err_vdd_arm;
+
+ if (exynos_info->set_freq == NULL) {
+ pr_err("%s: No set_freq function (ERR)\n", __func__);
+ goto err_vdd_arm;
+ }
+
+ arm_regulator = regulator_get(NULL, "vdd_arm");
+ if (IS_ERR(arm_regulator)) {
+ pr_err("%s: failed to get resource vdd_arm\n", __func__);
+ goto err_vdd_arm;
+ }
+
+ register_pm_notifier(&exynos_cpufreq_nb);
+
+ if (cpufreq_register_driver(&exynos_driver)) {
+ pr_err("%s: failed to register cpufreq driver\n", __func__);
+ goto err_cpufreq;
+ }
+
+ return 0;
+err_cpufreq:
+ unregister_pm_notifier(&exynos_cpufreq_nb);
+
+ if (!IS_ERR(arm_regulator))
+ regulator_put(arm_regulator);
+err_vdd_arm:
+ kfree(exynos_info);
+ pr_debug("%s: failed initialization\n", __func__);
+ return -EINVAL;
+}
+late_initcall(exynos_cpufreq_init);