2 files changed, 48 insertions, 0 deletions
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index b9a5158a30b..26b6b92942e 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -3,5 +3,6 @@ obj-$(CONFIG_CLKDEV_LOOKUP)	+= clkdev.o
 obj-$(CONFIG_COMMON_CLK)	+= clk.o clk-fixed-rate.o clk-gate.o \
 				   clk-mux.o clk-divider.o clk-fixed-factor.o
 # SoCs specific
+obj-$(CONFIG_ARCH_NOMADIK)	+= clk-nomadik.o
 obj-$(CONFIG_ARCH_MXS)		+= mxs/
 obj-$(CONFIG_PLAT_SPEAR)	+= spear/
diff --git a/drivers/clk/clk-nomadik.c b/drivers/clk/clk-nomadik.c
new file mode 100644
index 00000000000..517a8ff7121
--- /dev/null
+++ b/drivers/clk/clk-nomadik.c
@@ -0,0 +1,47 @@
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/clk-provider.h>
+
+/*
+ * The Nomadik clock tree is described in the STN8815A12 DB V4.2
+ * reference manual for the chip, page 94 ff.
+ */
+
+void __init nomadik_clk_init(void)
+{
+	struct clk *clk;
+
+	clk = clk_register_fixed_rate(NULL, "apb_pclk", NULL, CLK_IS_ROOT, 0);
+	clk_register_clkdev(clk, "apb_pclk", NULL);
+	clk_register_clkdev(clk, NULL, "gpio.0");
+	clk_register_clkdev(clk, NULL, "gpio.1");
+	clk_register_clkdev(clk, NULL, "gpio.2");
+	clk_register_clkdev(clk, NULL, "gpio.3");
+	clk_register_clkdev(clk, NULL, "rng");
+
+	/*
+	 * The 2.4 MHz TIMCLK reference clock is active at boot time, this is
+	 * actually the MXTALCLK @19.2 MHz divided by 8. This clock is used
+	 * by the timers and watchdog. See page 105 ff.
+	 */
+	clk = clk_register_fixed_rate(NULL, "TIMCLK", NULL, CLK_IS_ROOT,
+				      2400000);
+	clk_register_clkdev(clk, NULL, "mtu0");
+	clk_register_clkdev(clk, NULL, "mtu1");
+
+	/*
+	 * At boot time, PLL2 is set to generate a set of fixed clocks,
+	 * one of them is CLK48, the 48 MHz clock, routed to the UART, MMC/SD
+	 * I2C, IrDA, USB and SSP blocks.
+	 */
+	clk = clk_register_fixed_rate(NULL, "CLK48", NULL, CLK_IS_ROOT,
+				      48000000);
+	clk_register_clkdev(clk, NULL, "uart0");
+	clk_register_clkdev(clk, NULL, "uart1");
+	clk_register_clkdev(clk, NULL, "mmci");
+	clk_register_clkdev(clk, NULL, "ssp");
+	clk_register_clkdev(clk, NULL, "nmk-i2c.0");
+	clk_register_clkdev(clk, NULL, "nmk-i2c.1");
+}