1 files changed, 340 insertions, 4 deletions

diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c
index eb9f38d0aa5..0ab4ab21f56 100644
--- a/drivers/base/power/main.c
+++ b/drivers/base/power/main.c
@@ -20,19 +20,24 @@
  */
 
 #include <linux/device.h>
+#include <linux/kallsyms.h>
 #include <linux/mutex.h>
+#include <linux/pm.h>
+#include <linux/resume-trace.h>
 
+#include "../base.h"
 #include "power.h"
 
 LIST_HEAD(dpm_active);
-LIST_HEAD(dpm_off);
-LIST_HEAD(dpm_off_irq);
+static LIST_HEAD(dpm_off);
+static LIST_HEAD(dpm_off_irq);
 
-DEFINE_MUTEX(dpm_mtx);
-DEFINE_MUTEX(dpm_list_mtx);
+static DEFINE_MUTEX(dpm_mtx);
+static DEFINE_MUTEX(dpm_list_mtx);
 
 int (*platform_enable_wakeup)(struct device *dev, int is_on);
 
+
 int device_pm_add(struct device *dev)
 {
 	int error;
@@ -61,3 +66,334 @@ void device_pm_remove(struct device *dev)
 }
 
 
+/*------------------------- Resume routines -------------------------*/
+
+/**
+ *	resume_device - Restore state for one device.
+ *	@dev:	Device.
+ *
+ */
+
+static int resume_device(struct device * dev)
+{
+	int error = 0;
+
+	TRACE_DEVICE(dev);
+	TRACE_RESUME(0);
+
+	down(&dev->sem);
+
+	if (dev->bus && dev->bus->resume) {
+		dev_dbg(dev,"resuming\n");
+		error = dev->bus->resume(dev);
+	}
+
+	if (!error && dev->type && dev->type->resume) {
+		dev_dbg(dev,"resuming\n");
+		error = dev->type->resume(dev);
+	}
+
+	if (!error && dev->class && dev->class->resume) {
+		dev_dbg(dev,"class resume\n");
+		error = dev->class->resume(dev);
+	}
+
+	up(&dev->sem);
+
+	TRACE_RESUME(error);
+	return error;
+}
+
+
+static int resume_device_early(struct device * dev)
+{
+	int error = 0;
+
+	TRACE_DEVICE(dev);
+	TRACE_RESUME(0);
+	if (dev->bus && dev->bus->resume_early) {
+		dev_dbg(dev,"EARLY resume\n");
+		error = dev->bus->resume_early(dev);
+	}
+	TRACE_RESUME(error);
+	return error;
+}
+
+/*
+ * Resume the devices that have either not gone through
+ * the late suspend, or that did go through it but also
+ * went through the early resume
+ */
+static void dpm_resume(void)
+{
+	mutex_lock(&dpm_list_mtx);
+	while(!list_empty(&dpm_off)) {
+		struct list_head * entry = dpm_off.next;
+		struct device * dev = to_device(entry);
+
+		get_device(dev);
+		list_move_tail(entry, &dpm_active);
+
+		mutex_unlock(&dpm_list_mtx);
+		resume_device(dev);
+		mutex_lock(&dpm_list_mtx);
+		put_device(dev);
+	}
+	mutex_unlock(&dpm_list_mtx);
+}
+
+
+/**
+ *	device_resume - Restore state of each device in system.
+ *
+ *	Walk the dpm_off list, remove each entry, resume the device,
+ *	then add it to the dpm_active list.
+ */
+
+void device_resume(void)
+{
+	might_sleep();
+	mutex_lock(&dpm_mtx);
+	dpm_resume();
+	mutex_unlock(&dpm_mtx);
+}
+
+EXPORT_SYMBOL_GPL(device_resume);
+
+
+/**
+ *	dpm_power_up - Power on some devices.
+ *
+ *	Walk the dpm_off_irq list and power each device up. This
+ *	is used for devices that required they be powered down with
+ *	interrupts disabled. As devices are powered on, they are moved
+ *	to the dpm_active list.
+ *
+ *	Interrupts must be disabled when calling this.
+ */
+
+static void dpm_power_up(void)
+{
+	while(!list_empty(&dpm_off_irq)) {
+		struct list_head * entry = dpm_off_irq.next;
+		struct device * dev = to_device(entry);
+
+		list_move_tail(entry, &dpm_off);
+		resume_device_early(dev);
+	}
+}
+
+
+/**
+ *	device_power_up - Turn on all devices that need special attention.
+ *
+ *	Power on system devices then devices that required we shut them down
+ *	with interrupts disabled.
+ *	Called with interrupts disabled.
+ */
+
+void device_power_up(void)
+{
+	sysdev_resume();
+	dpm_power_up();
+}
+
+EXPORT_SYMBOL_GPL(device_power_up);
+
+
+/*------------------------- Suspend routines -------------------------*/
+
+/*
+ * The entries in the dpm_active list are in a depth first order, simply
+ * because children are guaranteed to be discovered after parents, and
+ * are inserted at the back of the list on discovery.
+ *
+ * All list on the suspend path are done in reverse order, so we operate
+ * on the leaves of the device tree (or forests, depending on how you want
+ * to look at it ;) first. As nodes are removed from the back of the list,
+ * they are inserted into the front of their destintation lists.
+ *
+ * Things are the reverse on the resume path - iterations are done in
+ * forward order, and nodes are inserted at the back of their destination
+ * lists. This way, the ancestors will be accessed before their descendents.
+ */
+
+static inline char *suspend_verb(u32 event)
+{
+	switch (event) {
+	case PM_EVENT_SUSPEND:	return "suspend";
+	case PM_EVENT_FREEZE:	return "freeze";
+	case PM_EVENT_PRETHAW:	return "prethaw";
+	default:		return "(unknown suspend event)";
+	}
+}
+
+
+static void
+suspend_device_dbg(struct device *dev, pm_message_t state, char *info)
+{
+	dev_dbg(dev, "%s%s%s\n", info, suspend_verb(state.event),
+		((state.event == PM_EVENT_SUSPEND) && device_may_wakeup(dev)) ?
+		", may wakeup" : "");
+}
+
+/**
+ *	suspend_device - Save state of one device.
+ *	@dev:	Device.
+ *	@state:	Power state device is entering.
+ */
+
+static int suspend_device(struct device * dev, pm_message_t state)
+{
+	int error = 0;
+
+	down(&dev->sem);
+	if (dev->power.power_state.event) {
+		dev_dbg(dev, "PM: suspend %d-->%d\n",
+			dev->power.power_state.event, state.event);
+	}
+
+	if (dev->class && dev->class->suspend) {
+		suspend_device_dbg(dev, state, "class ");
+		error = dev->class->suspend(dev, state);
+		suspend_report_result(dev->class->suspend, error);
+	}
+
+	if (!error && dev->type && dev->type->suspend) {
+		suspend_device_dbg(dev, state, "type ");
+		error = dev->type->suspend(dev, state);
+		suspend_report_result(dev->type->suspend, error);
+	}
+
+	if (!error && dev->bus && dev->bus->suspend) {
+		suspend_device_dbg(dev, state, "");
+		error = dev->bus->suspend(dev, state);
+		suspend_report_result(dev->bus->suspend, error);
+	}
+	up(&dev->sem);
+	return error;
+}
+
+
+/*
+ * This is called with interrupts off, only a single CPU
+ * running. We can't acquire a mutex or semaphore (and we don't
+ * need the protection)
+ */
+static int suspend_device_late(struct device *dev, pm_message_t state)
+{
+	int error = 0;
+
+	if (dev->bus && dev->bus->suspend_late) {
+		suspend_device_dbg(dev, state, "LATE ");
+		error = dev->bus->suspend_late(dev, state);
+		suspend_report_result(dev->bus->suspend_late, error);
+	}
+	return error;
+}
+
+/**
+ *	device_suspend - Save state and stop all devices in system.
+ *	@state:		Power state to put each device in.
+ *
+ *	Walk the dpm_active list, call ->suspend() for each device, and move
+ *	it to the dpm_off list.
+ *
+ *	(For historical reasons, if it returns -EAGAIN, that used to mean
+ *	that the device would be called again with interrupts disabled.
+ *	These days, we use the "suspend_late()" callback for that, so we
+ *	print a warning and consider it an error).
+ *
+ *	If we get a different error, try and back out.
+ *
+ *	If we hit a failure with any of the devices, call device_resume()
+ *	above to bring the suspended devices back to life.
+ *
+ */
+
+int device_suspend(pm_message_t state)
+{
+	int error = 0;
+
+	might_sleep();
+	mutex_lock(&dpm_mtx);
+	mutex_lock(&dpm_list_mtx);
+	while (!list_empty(&dpm_active) && error == 0) {
+		struct list_head * entry = dpm_active.prev;
+		struct device * dev = to_device(entry);
+
+		get_device(dev);
+		mutex_unlock(&dpm_list_mtx);
+
+		error = suspend_device(dev, state);
+
+		mutex_lock(&dpm_list_mtx);
+
+		/* Check if the device got removed */
+		if (!list_empty(&dev->power.entry)) {
+			/* Move it to the dpm_off list */
+			if (!error)
+				list_move(&dev->power.entry, &dpm_off);
+		}
+		if (error)
+			printk(KERN_ERR "Could not suspend device %s: "
+				"error %d%s\n",
+				kobject_name(&dev->kobj), error,
+				error == -EAGAIN ? " (please convert to suspend_late)" : "");
+		put_device(dev);
+	}
+	mutex_unlock(&dpm_list_mtx);
+	if (error)
+		dpm_resume();
+
+	mutex_unlock(&dpm_mtx);
+	return error;
+}
+
+EXPORT_SYMBOL_GPL(device_suspend);
+
+/**
+ *	device_power_down - Shut down special devices.
+ *	@state:		Power state to enter.
+ *
+ *	Walk the dpm_off_irq list, calling ->power_down() for each device that
+ *	couldn't power down the device with interrupts enabled. When we're
+ *	done, power down system devices.
+ */
+
+int device_power_down(pm_message_t state)
+{
+	int error = 0;
+	struct device * dev;
+
+	while (!list_empty(&dpm_off)) {
+		struct list_head * entry = dpm_off.prev;
+
+		dev = to_device(entry);
+		error = suspend_device_late(dev, state);
+		if (error)
+			goto Error;
+		list_move(&dev->power.entry, &dpm_off_irq);
+	}
+
+	error = sysdev_suspend(state);
+ Done:
+	return error;
+ Error:
+	printk(KERN_ERR "Could not power down device %s: "
+		"error %d\n", kobject_name(&dev->kobj), error);
+	dpm_power_up();
+	goto Done;
+}
+
+EXPORT_SYMBOL_GPL(device_power_down);
+
+void __suspend_report_result(const char *function, void *fn, int ret)
+{
+	if (ret) {
+		printk(KERN_ERR "%s(): ", function);
+		print_fn_descriptor_symbol("%s() returns ", (unsigned long)fn);
+		printk("%d\n", ret);
+	}
+}
+EXPORT_SYMBOL_GPL(__suspend_report_result);