diff options
Diffstat (limited to 'arch')
352 files changed, 3514 insertions, 3057 deletions
diff --git a/arch/alpha/include/asm/futex.h b/arch/alpha/include/asm/futex.h index e8a761aee08..f939794363a 100644 --- a/arch/alpha/include/asm/futex.h +++ b/arch/alpha/include/asm/futex.h @@ -108,7 +108,7 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr, " lda $31,3b-2b(%0)\n" " .previous\n" : "+r"(ret), "=&r"(prev), "=&r"(cmp) - : "r"(uaddr), "r"((long)oldval), "r"(newval) + : "r"(uaddr), "r"((long)(int)oldval), "r"(newval) : "memory"); *uval = prev; diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index a48aecc17ea..3cc5897650d 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1280,7 +1280,7 @@ config ARM_ERRATA_743622 depends on CPU_V7 help This option enables the workaround for the 743622 Cortex-A9 - (r2p0..r2p2) erratum. Under very rare conditions, a faulty + (r2p*) erratum. Under very rare conditions, a faulty optimisation in the Cortex-A9 Store Buffer may lead to data corruption. This workaround sets a specific bit in the diagnostic register of the Cortex-A9 which disables the Store Buffer @@ -1578,6 +1578,7 @@ config ARCH_NR_GPIO int default 1024 if ARCH_SHMOBILE || ARCH_TEGRA default 350 if ARCH_U8500 + default 264 if MACH_H4700 default 0 help Maximum number of GPIOs in the system. diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index e0d236d7ff7..03646c4c13d 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -81,25 +81,6 @@ choice prompt "Kernel low-level debugging port" depends on DEBUG_LL - config DEBUG_LL_UART_NONE - bool "No low-level debugging UART" - help - Say Y here if your platform doesn't provide a UART option - below. This relies on your platform choosing the right UART - definition internally in order for low-level debugging to - work. - - config DEBUG_ICEDCC - bool "Kernel low-level debugging via EmbeddedICE DCC channel" - help - Say Y here if you want the debug print routines to direct - their output to the EmbeddedICE macrocell's DCC channel using - co-processor 14. This is known to work on the ARM9 style ICE - channel and on the XScale with the PEEDI. - - Note that the system will appear to hang during boot if there - is nothing connected to read from the DCC. - config AT91_DEBUG_LL_DBGU0 bool "Kernel low-level debugging on rm9200, 9260/9g20, 9261/9g10 and 9rl" depends on HAVE_AT91_DBGU0 @@ -108,20 +89,6 @@ choice bool "Kernel low-level debugging on 9263, 9g45 and cap9" depends on HAVE_AT91_DBGU1 - config DEBUG_FOOTBRIDGE_COM1 - bool "Kernel low-level debugging messages via footbridge 8250 at PCI COM1" - depends on FOOTBRIDGE - help - Say Y here if you want the debug print routines to direct - their output to the 8250 at PCI COM1. - - config DEBUG_DC21285_PORT - bool "Kernel low-level debugging messages via footbridge serial port" - depends on FOOTBRIDGE - help - Say Y here if you want the debug print routines to direct - their output to the serial port in the DC21285 (Footbridge). - config DEBUG_CLPS711X_UART1 bool "Kernel low-level debugging messages via UART1" depends on ARCH_CLPS711X @@ -136,6 +103,20 @@ choice Say Y here if you want the debug print routines to direct their output to the second serial port on these devices. + config DEBUG_DC21285_PORT + bool "Kernel low-level debugging messages via footbridge serial port" + depends on FOOTBRIDGE + help + Say Y here if you want the debug print routines to direct + their output to the serial port in the DC21285 (Footbridge). + + config DEBUG_FOOTBRIDGE_COM1 + bool "Kernel low-level debugging messages via footbridge 8250 at PCI COM1" + depends on FOOTBRIDGE + help + Say Y here if you want the debug print routines to direct + their output to the 8250 at PCI COM1. + config DEBUG_HIGHBANK_UART bool "Kernel low-level debugging messages via Highbank UART" depends on ARCH_HIGHBANK @@ -206,38 +187,42 @@ choice Say Y here if you want kernel low-level debugging support on i.MX6Q. - config DEBUG_S3C_UART0 - depends on PLAT_SAMSUNG - bool "Use S3C UART 0 for low-level debug" + config DEBUG_MSM_UART1 + bool "Kernel low-level debugging messages via MSM UART1" + depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50 help Say Y here if you want the debug print routines to direct - their output to UART 0. The port must have been initialised - by the boot-loader before use. - - The uncompressor code port configuration is now handled - by CONFIG_S3C_LOWLEVEL_UART_PORT. + their output to the first serial port on MSM devices. - config DEBUG_S3C_UART1 - depends on PLAT_SAMSUNG - bool "Use S3C UART 1 for low-level debug" + config DEBUG_MSM_UART2 + bool "Kernel low-level debugging messages via MSM UART2" + depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50 help Say Y here if you want the debug print routines to direct - their output to UART 1. The port must have been initialised - by the boot-loader before use. + their output to the second serial port on MSM devices. - The uncompressor code port configuration is now handled - by CONFIG_S3C_LOWLEVEL_UART_PORT. + config DEBUG_MSM_UART3 + bool "Kernel low-level debugging messages via MSM UART3" + depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50 + help + Say Y here if you want the debug print routines to direct + their output to the third serial port on MSM devices. - config DEBUG_S3C_UART2 - depends on PLAT_SAMSUNG - bool "Use S3C UART 2 for low-level debug" + config DEBUG_MSM8660_UART + bool "Kernel low-level debugging messages via MSM 8660 UART" + depends on ARCH_MSM8X60 + select MSM_HAS_DEBUG_UART_HS help Say Y here if you want the debug print routines to direct - their output to UART 2. The port must have been initialised - by the boot-loader before use. + their output to the serial port on MSM 8660 devices. - The uncompressor code port configuration is now handled - by CONFIG_S3C_LOWLEVEL_UART_PORT. + config DEBUG_MSM8960_UART + bool "Kernel low-level debugging messages via MSM 8960 UART" + depends on ARCH_MSM8960 + select MSM_HAS_DEBUG_UART_HS + help + Say Y here if you want the debug print routines to direct + their output to the serial port on MSM 8960 devices. config DEBUG_REALVIEW_STD_PORT bool "RealView Default UART" @@ -255,42 +240,57 @@ choice their output to the standard serial port on the RealView PB1176 platform. - config DEBUG_MSM_UART1 - bool "Kernel low-level debugging messages via MSM UART1" - depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50 + config DEBUG_S3C_UART0 + depends on PLAT_SAMSUNG + bool "Use S3C UART 0 for low-level debug" help Say Y here if you want the debug print routines to direct - their output to the first serial port on MSM devices. + their output to UART 0. The port must have been initialised + by the boot-loader before use. - config DEBUG_MSM_UART2 - bool "Kernel low-level debugging messages via MSM UART2" - depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50 + The uncompressor code port configuration is now handled + by CONFIG_S3C_LOWLEVEL_UART_PORT. + + config DEBUG_S3C_UART1 + depends on PLAT_SAMSUNG + bool "Use S3C UART 1 for low-level debug" help Say Y here if you want the debug print routines to direct - their output to the second serial port on MSM devices. + their output to UART 1. The port must have been initialised + by the boot-loader before use. - config DEBUG_MSM_UART3 - bool "Kernel low-level debugging messages via MSM UART3" - depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50 + The uncompressor code port configuration is now handled + by CONFIG_S3C_LOWLEVEL_UART_PORT. + + config DEBUG_S3C_UART2 + depends on PLAT_SAMSUNG + bool "Use S3C UART 2 for low-level debug" help Say Y here if you want the debug print routines to direct - their output to the third serial port on MSM devices. + their output to UART 2. The port must have been initialised + by the boot-loader before use. - config DEBUG_MSM8660_UART - bool "Kernel low-level debugging messages via MSM 8660 UART" - depends on ARCH_MSM8X60 - select MSM_HAS_DEBUG_UART_HS + The uncompressor code port configuration is now handled + by CONFIG_S3C_LOWLEVEL_UART_PORT. + + config DEBUG_LL_UART_NONE + bool "No low-level debugging UART" help - Say Y here if you want the debug print routines to direct - their output to the serial port on MSM 8660 devices. + Say Y here if your platform doesn't provide a UART option + below. This relies on your platform choosing the right UART + definition internally in order for low-level debugging to + work. - config DEBUG_MSM8960_UART - bool "Kernel low-level debugging messages via MSM 8960 UART" - depends on ARCH_MSM8960 - select MSM_HAS_DEBUG_UART_HS + config DEBUG_ICEDCC + bool "Kernel low-level debugging via EmbeddedICE DCC channel" help Say Y here if you want the debug print routines to direct - their output to the serial port on MSM 8960 devices. + their output to the EmbeddedICE macrocell's DCC channel using + co-processor 14. This is known to work on the ARM9 style ICE + channel and on the XScale with the PEEDI. + + Note that the system will appear to hang during boot if there + is nothing connected to read from the DCC. endchoice diff --git a/arch/arm/boot/.gitignore b/arch/arm/boot/.gitignore index ce1c5ff746e..3c79f85975a 100644 --- a/arch/arm/boot/.gitignore +++ b/arch/arm/boot/.gitignore @@ -3,3 +3,4 @@ zImage xipImage bootpImage uImage +*.dtb diff --git a/arch/arm/boot/dts/kirkwood-dreamplug.dts b/arch/arm/boot/dts/kirkwood-dreamplug.dts new file mode 100644 index 00000000000..8a5dff807b4 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-dreamplug.dts @@ -0,0 +1,25 @@ +/dts-v1/; + +/include/ "kirkwood.dtsi" + +/ { + model = "Globalscale Technologies Dreamplug"; + compatible = "globalscale,dreamplug-003-ds2001", "globalscale,dreamplug", "marvell,kirkwood-88f6281", "marvell,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x20000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk"; + }; + + serial@f1012000 { + compatible = "ns16550a"; + reg = <0xf1012000 0xff>; + reg-shift = <2>; + interrupts = <33>; + clock-frequency = <200000000>; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi new file mode 100644 index 00000000000..771c6bbeb29 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood.dtsi @@ -0,0 +1,6 @@ +/include/ "skeleton.dtsi" + +/ { + compatible = "marvell,kirkwood"; +}; + diff --git a/arch/arm/boot/dts/tegra-paz00.dts b/arch/arm/boot/dts/tegra-paz00.dts index 825d2957da0..61f38580997 100644 --- a/arch/arm/boot/dts/tegra-paz00.dts +++ b/arch/arm/boot/dts/tegra-paz00.dts @@ -35,6 +35,11 @@ i2c@7000d000 { clock-frequency = <400000>; + + adt7461@4c { + compatible = "adi,adt7461"; + reg = <0x4c>; + }; }; serial@70006000 { @@ -74,4 +79,25 @@ sdhci@c8000600 { support-8bit; }; + + gpio-keys { + compatible = "gpio-keys"; + + power { + label = "Power"; + gpios = <&gpio 79 1>; /* gpio PJ7, active low */ + linux,code = <116>; /* KEY_POWER */ + gpio-key,wakeup; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + wifi { + label = "wifi-led"; + gpios = <&gpio 24 0>; + linux,default-trigger = "rfkill0"; + }; + }; }; diff --git a/arch/arm/common/it8152.c b/arch/arm/common/it8152.c index d1bcd7b13eb..fb1f1cfce60 100644 --- a/arch/arm/common/it8152.c +++ b/arch/arm/common/it8152.c @@ -320,13 +320,6 @@ err0: return -EBUSY; } -/* - * If we set up a device for bus mastering, we need to check the latency - * timer as we don't have even crappy BIOSes to set it properly. - * The implementation is from arch/i386/pci/i386.c - */ -unsigned int pcibios_max_latency = 255; - /* ITE bridge requires setting latency timer to avoid early bus access termination by PCI bus master devices */ diff --git a/arch/arm/common/pl330.c b/arch/arm/common/pl330.c index d8e44a43047..ff3ad224482 100644 --- a/arch/arm/common/pl330.c +++ b/arch/arm/common/pl330.c @@ -1502,12 +1502,13 @@ int pl330_chan_ctrl(void *ch_id, enum pl330_chan_op op) struct pl330_thread *thrd = ch_id; struct pl330_dmac *pl330; unsigned long flags; - int ret = 0, active = thrd->req_running; + int ret = 0, active; if (!thrd || thrd->free || thrd->dmac->state == DYING) return -EINVAL; pl330 = thrd->dmac; + active = thrd->req_running; spin_lock_irqsave(&pl330->lock, flags); diff --git a/arch/arm/configs/tegra_defconfig b/arch/arm/configs/tegra_defconfig index fd5d3041d71..351d6708c3a 100644 --- a/arch/arm/configs/tegra_defconfig +++ b/arch/arm/configs/tegra_defconfig @@ -11,11 +11,14 @@ CONFIG_RT_GROUP_SCHED=y CONFIG_BLK_DEV_INITRD=y # CONFIG_ELF_CORE is not set CONFIG_EMBEDDED=y +CONFIG_PERF_EVENTS=y CONFIG_SLAB=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set +CONFIG_PARTITION_ADVANCED=y +CONFIG_EFI_PARTITION=y # CONFIG_IOSCHED_DEADLINE is not set # CONFIG_IOSCHED_CFQ is not set CONFIG_ARCH_TEGRA=y @@ -27,18 +30,20 @@ CONFIG_MACH_PAZ00=y CONFIG_MACH_TRIMSLICE=y CONFIG_MACH_WARIO=y CONFIG_MACH_VENTANA=y -CONFIG_TEGRA_DEBUG_UARTD=y -CONFIG_ARM_ERRATA_742230=y +CONFIG_TEGRA_EMC_SCALING_ENABLE=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_SMP=y -CONFIG_NR_CPUS=2 CONFIG_PREEMPT=y CONFIG_AEABI=y # CONFIG_OABI_COMPAT is not set CONFIG_HIGHMEM=y CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_AUTO_ZRELADDR=y +CONFIG_CPU_FREQ=y +CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y +CONFIG_CPU_IDLE=y CONFIG_VFP=y CONFIG_NET=y CONFIG_PACKET=y @@ -68,7 +73,6 @@ CONFIG_IPV6_MULTIPLE_TABLES=y # CONFIG_FIRMWARE_IN_KERNEL is not set CONFIG_PROC_DEVICETREE=y CONFIG_BLK_DEV_LOOP=y -CONFIG_MISC_DEVICES=y CONFIG_AD525X_DPOT=y CONFIG_AD525X_DPOT_I2C=y CONFIG_ICS932S401=y @@ -76,6 +80,7 @@ CONFIG_APDS9802ALS=y CONFIG_ISL29003=y CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y +CONFIG_BLK_DEV_SR=y # CONFIG_SCSI_LOWLEVEL is not set CONFIG_NETDEVICES=y CONFIG_DUMMY=y @@ -85,8 +90,7 @@ CONFIG_USB_USBNET=y CONFIG_USB_NET_SMSC75XX=y CONFIG_USB_NET_SMSC95XX=y # CONFIG_WLAN is not set -# CONFIG_INPUT is not set -# CONFIG_SERIO is not set +CONFIG_INPUT_EVDEV=y # CONFIG_VT is not set # CONFIG_LEGACY_PTYS is not set # CONFIG_DEVKMEM is not set @@ -96,13 +100,15 @@ CONFIG_SERIAL_OF_PLATFORM=y # CONFIG_HW_RANDOM is not set CONFIG_I2C=y # CONFIG_I2C_COMPAT is not set -# CONFIG_I2C_HELPER_AUTO is not set CONFIG_I2C_TEGRA=y CONFIG_SPI=y CONFIG_SPI_TEGRA=y CONFIG_SENSORS_LM90=y CONFIG_MFD_TPS6586X=y CONFIG_REGULATOR=y +CONFIG_REGULATOR_FIXED_VOLTAGE=y +CONFIG_REGULATOR_VIRTUAL_CONSUMER=y +CONFIG_REGULATOR_GPIO=y CONFIG_REGULATOR_TPS6586X=y CONFIG_SOUND=y CONFIG_SND=y @@ -116,11 +122,13 @@ CONFIG_SND_SOC=y CONFIG_SND_SOC_TEGRA=y CONFIG_SND_SOC_TEGRA_WM8903=y CONFIG_SND_SOC_TEGRA_TRIMSLICE=y +CONFIG_SND_SOC_TEGRA_ALC5632=y CONFIG_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_TEGRA=y CONFIG_USB_STORAGE=y CONFIG_MMC=y +CONFIG_MMC_BLOCK_MINORS=16 CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_PLTFM=y CONFIG_MMC_SDHCI_TEGRA=y @@ -130,6 +138,11 @@ CONFIG_STAGING=y CONFIG_IIO=y CONFIG_SENSORS_ISL29018=y CONFIG_SENSORS_AK8975=y +CONFIG_MFD_NVEC=y +CONFIG_KEYBOARD_NVEC=y +CONFIG_SERIO_NVEC_PS2=y +CONFIG_TEGRA_IOMMU_GART=y +CONFIG_TEGRA_IOMMU_SMMU=y CONFIG_EXT2_FS=y CONFIG_EXT2_FS_XATTR=y CONFIG_EXT2_FS_POSIX_ACL=y @@ -138,13 +151,12 @@ CONFIG_EXT3_FS=y # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_POSIX_ACL=y CONFIG_EXT3_FS_SECURITY=y +CONFIG_EXT4_FS=y # CONFIG_DNOTIFY is not set CONFIG_VFAT_FS=y CONFIG_TMPFS=y CONFIG_NFS_FS=y CONFIG_ROOT_NFS=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_EFI_PARTITION=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ISO8859_1=y CONFIG_PRINTK_TIME=y @@ -162,9 +174,8 @@ CONFIG_DEBUG_SG=y CONFIG_DEBUG_LL=y CONFIG_EARLY_PRINTK=y CONFIG_CRYPTO_ECB=y -CONFIG_CRYPTO_AES=y CONFIG_CRYPTO_ARC4=y CONFIG_CRYPTO_TWOFISH=y # CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_DEV_TEGRA_AES=y CONFIG_CRC_CCITT=y -CONFIG_CRC16=y diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h index 62f8095d46d..23371b17b23 100644 --- a/arch/arm/include/asm/assembler.h +++ b/arch/arm/include/asm/assembler.h @@ -137,6 +137,11 @@ disable_irq .endm + .macro save_and_disable_irqs_notrace, oldcpsr + mrs \oldcpsr, cpsr + disable_irq_notrace + .endm + /* * Restore interrupt state previously stored in a register. We don't * guarantee that this will preserve the flags. diff --git a/arch/arm/include/asm/hardware/pl330.h b/arch/arm/include/asm/hardware/pl330.h index 575fa8186ca..c1821385abf 100644 --- a/arch/arm/include/asm/hardware/pl330.h +++ b/arch/arm/include/asm/hardware/pl330.h @@ -41,7 +41,7 @@ enum pl330_dstcachectrl { DCCTRL1, /* Bufferable only */ DCCTRL2, /* Cacheable, but do not allocate */ DCCTRL3, /* Cacheable and bufferable, but do not allocate */ - DINVALID1 = 8, + DINVALID1, /* AWCACHE = 0x1000 */ DINVALID2, DCCTRL6, /* Cacheable write-through, allocate on writes only */ DCCTRL7, /* Cacheable write-back, allocate on writes only */ diff --git a/arch/arm/include/asm/pmu.h b/arch/arm/include/asm/pmu.h index b5a5be2536c..90114faa9f3 100644 --- a/arch/arm/include/asm/pmu.h +++ b/arch/arm/include/asm/pmu.h @@ -134,7 +134,7 @@ int __init armpmu_register(struct arm_pmu *armpmu, char *name, int type); u64 armpmu_event_update(struct perf_event *event, struct hw_perf_event *hwc, - int idx, int overflow); + int idx); int armpmu_event_set_period(struct perf_event *event, struct hw_perf_event *hwc, diff --git a/arch/arm/include/asm/processor.h b/arch/arm/include/asm/processor.h index ce280b8d613..cb8d638924f 100644 --- a/arch/arm/include/asm/processor.h +++ b/arch/arm/include/asm/processor.h @@ -22,6 +22,7 @@ #include <asm/hw_breakpoint.h> #include <asm/ptrace.h> #include <asm/types.h> +#include <asm/system.h> #ifdef __KERNEL__ #define STACK_TOP ((current->personality & ADDR_LIMIT_32BIT) ? \ diff --git a/arch/arm/include/asm/system.h b/arch/arm/include/asm/system.h index e4c96cc6ec0..424aa458c48 100644 --- a/arch/arm/include/asm/system.h +++ b/arch/arm/include/asm/system.h @@ -110,6 +110,7 @@ extern void cpu_init(void); void soft_restart(unsigned long); extern void (*arm_pm_restart)(char str, const char *cmd); +extern void (*arm_pm_idle)(void); #define UDBG_UNDEFINED (1 << 0) #define UDBG_SYSCALL (1 << 1) diff --git a/arch/arm/kernel/ecard.c b/arch/arm/kernel/ecard.c index 4dd0edab6a6..1651d495074 100644 --- a/arch/arm/kernel/ecard.c +++ b/arch/arm/kernel/ecard.c @@ -242,6 +242,7 @@ static void ecard_init_pgtables(struct mm_struct *mm) memcpy(dst_pgd, src_pgd, sizeof(pgd_t) * (EASI_SIZE / PGDIR_SIZE)); + vma.vm_flags = VM_EXEC; vma.vm_mm = mm; flush_tlb_range(&vma, IO_START, IO_START + IO_SIZE); diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c index 5bb91bf3d47..b2abfa18f13 100644 --- a/arch/arm/kernel/perf_event.c +++ b/arch/arm/kernel/perf_event.c @@ -180,7 +180,7 @@ armpmu_event_set_period(struct perf_event *event, u64 armpmu_event_update(struct perf_event *event, struct hw_perf_event *hwc, - int idx, int overflow) + int idx) { struct arm_pmu *armpmu = to_arm_pmu(event->pmu); u64 delta, prev_raw_count, new_raw_count; @@ -193,13 +193,7 @@ again: new_raw_count) != prev_raw_count) goto again; - new_raw_count &= armpmu->max_period; - prev_raw_count &= armpmu->max_period; - - if (overflow) - delta = armpmu->max_period - prev_raw_count + new_raw_count + 1; - else - delta = new_raw_count - prev_raw_count; + delta = (new_raw_count - prev_raw_count) & armpmu->max_period; local64_add(delta, &event->count); local64_sub(delta, &hwc->period_left); @@ -216,7 +210,7 @@ armpmu_read(struct perf_event *event) if (hwc->idx < 0) return; - armpmu_event_update(event, hwc, hwc->idx, 0); + armpmu_event_update(event, hwc, hwc->idx); } static void @@ -232,7 +226,7 @@ armpmu_stop(struct perf_event *event, int flags) if (!(hwc->state & PERF_HES_STOPPED)) { armpmu->disable(hwc, hwc->idx); barrier(); /* why? */ - armpmu_event_update(event, hwc, hwc->idx, 0); + armpmu_event_update(event, hwc, hwc->idx); hwc->state |= PERF_HES_STOPPED | PERF_HES_UPTODATE; } } @@ -518,7 +512,13 @@ __hw_perf_event_init(struct perf_event *event) hwc->config_base |= (unsigned long)mapping; if (!hwc->sample_period) { - hwc->sample_period = armpmu->max_period; + /* + * For non-sampling runs, limit the sample_period to half + * of the counter width. That way, the new counter value + * is far less likely to overtake the previous one unless + * you have some serious IRQ latency issues. + */ + hwc->sample_period = armpmu->max_period >> 1; hwc->last_period = hwc->sample_period; local64_set(&hwc->period_left, hwc->sample_period); } @@ -680,6 +680,28 @@ static void __init cpu_pmu_init(struct arm_pmu *armpmu) } /* + * PMU hardware loses all context when a CPU goes offline. + * When a CPU is hotplugged back in, since some hardware registers are + * UNKNOWN at reset, the PMU must be explicitly reset to avoid reading + * junk values out of them. + */ +static int __cpuinit pmu_cpu_notify(struct notifier_block *b, + unsigned long action, void *hcpu) +{ + if ((action & ~CPU_TASKS_FROZEN) != CPU_STARTING) + return NOTIFY_DONE; + + if (cpu_pmu && cpu_pmu->reset) + cpu_pmu->reset(NULL); + + return NOTIFY_OK; +} + +static struct notifier_block __cpuinitdata pmu_cpu_notifier = { + .notifier_call = pmu_cpu_notify, +}; + +/* * CPU PMU identification and registration. */ static int __init @@ -730,6 +752,7 @@ init_hw_perf_events(void) pr_info("enabled with %s PMU driver, %d counters available\n", cpu_pmu->name, cpu_pmu->num_events); cpu_pmu_init(cpu_pmu); + register_cpu_notifier(&pmu_cpu_notifier); armpmu_register(cpu_pmu, "cpu", PERF_TYPE_RAW); } else { pr_info("no hardware support available\n"); diff --git a/arch/arm/kernel/perf_event_v6.c b/arch/arm/kernel/perf_event_v6.c index 533be9930ec..b78af0cc6ef 100644 --- a/arch/arm/kernel/perf_event_v6.c +++ b/arch/arm/kernel/perf_event_v6.c @@ -467,23 +467,6 @@ armv6pmu_enable_event(struct hw_perf_event *hwc, raw_spin_unlock_irqrestore(&events->pmu_lock, flags); } -static int counter_is_active(unsigned long pmcr, int idx) -{ - unsigned long mask = 0; - if (idx == ARMV6_CYCLE_COUNTER) - mask = ARMV6_PMCR_CCOUNT_IEN; - else if (idx == ARMV6_COUNTER0) - mask = ARMV6_PMCR_COUNT0_IEN; - else if (idx == ARMV6_COUNTER1) - mask = ARMV6_PMCR_COUNT1_IEN; - - if (mask) - return pmcr & mask; - - WARN_ONCE(1, "invalid counter number (%d)\n", idx); - return 0; -} - static irqreturn_t armv6pmu_handle_irq(int irq_num, void *dev) @@ -513,7 +496,8 @@ armv6pmu_handle_irq(int irq_num, struct perf_event *event = cpuc->events[idx]; struct hw_perf_event *hwc; - if (!counter_is_active(pmcr, idx)) + /* Ignore if we don't have an event. */ + if (!event) continue; /* @@ -524,7 +508,7 @@ armv6pmu_handle_irq(int irq_num, continue; hwc = &event->hw; - armpmu_event_update(event, hwc, idx, 1); + armpmu_event_update(event, hwc, idx); data.period = event->hw.last_period; if (!armpmu_event_set_period(event, hwc, idx)) continue; diff --git a/arch/arm/kernel/perf_event_v7.c b/arch/arm/kernel/perf_event_v7.c index 6933244c68f..4d7095af2ab 100644 --- a/arch/arm/kernel/perf_event_v7.c +++ b/arch/arm/kernel/perf_event_v7.c @@ -809,6 +809,11 @@ static inline int armv7_pmnc_disable_intens(int idx) counter = ARMV7_IDX_TO_COUNTER(idx); asm volatile("mcr p15, 0, %0, c9, c14, 2" : : "r" (BIT(counter))); + isb(); + /* Clear the overflow flag in case an interrupt is pending. */ + asm volatile("mcr p15, 0, %0, c9, c12, 3" : : "r" (BIT(counter))); + isb(); + return idx; } @@ -955,6 +960,10 @@ static irqreturn_t armv7pmu_handle_irq(int irq_num, void *dev) struct perf_event *event = cpuc->events[idx]; struct hw_perf_event *hwc; + /* Ignore if we don't have an event. */ + if (!event) + continue; + /* * We have a single interrupt for all counters. Check that * each counter has overflowed before we process it. @@ -963,7 +972,7 @@ static irqreturn_t armv7pmu_handle_irq(int irq_num, void *dev) continue; hwc = &event->hw; - armpmu_event_update(event, hwc, idx, 1); + armpmu_event_update(event, hwc, idx); data.period = event->hw.last_period; if (!armpmu_event_set_period(event, hwc, idx)) continue; diff --git a/arch/arm/kernel/perf_event_xscale.c b/arch/arm/kernel/perf_event_xscale.c index 3b99d826982..71a21e6712f 100644 --- a/arch/arm/kernel/perf_event_xscale.c +++ b/arch/arm/kernel/perf_event_xscale.c @@ -255,11 +255,14 @@ xscale1pmu_handle_irq(int irq_num, void *dev) struct perf_event *event = cpuc->events[idx]; struct hw_perf_event *hwc; + if (!event) + continue; + if (!xscale1_pmnc_counter_has_overflowed(pmnc, idx)) continue; hwc = &event->hw; - armpmu_event_update(event, hwc, idx, 1); + armpmu_event_update(event, hwc, idx); data.period = event->hw.last_period; if (!armpmu_event_set_period(event, hwc, idx)) continue; @@ -592,11 +595,14 @@ xscale2pmu_handle_irq(int irq_num, void *dev) struct perf_event *event = cpuc->events[idx]; struct hw_perf_event *hwc; - if (!xscale2_pmnc_counter_has_overflowed(pmnc, idx)) + if (!event) + continue; + + if (!xscale2_pmnc_counter_has_overflowed(of_flags, idx)) continue; hwc = &event->hw; - armpmu_event_update(event, hwc, idx, 1); + armpmu_event_update(event, hwc, idx); data.period = event->hw.last_period; if (!armpmu_event_set_period(event, hwc, idx)) continue; @@ -663,7 +669,7 @@ xscale2pmu_enable_event(struct hw_perf_event *hwc, int idx) static void xscale2pmu_disable_event(struct hw_perf_event *hwc, int idx) { - unsigned long flags, ien, evtsel; + unsigned long flags, ien, evtsel, of_flags; struct pmu_hw_events *events = cpu_pmu->get_hw_events(); ien = xscale2pmu_read_int_enable(); @@ -672,26 +678,31 @@ xscale2pmu_disable_event(struct hw_perf_event *hwc, int idx) switch (idx) { case XSCALE_CYCLE_COUNTER: ien &= ~XSCALE2_CCOUNT_INT_EN; + of_flags = XSCALE2_CCOUNT_OVERFLOW; break; case XSCALE_COUNTER0: ien &= ~XSCALE2_COUNT0_INT_EN; evtsel &= ~XSCALE2_COUNT0_EVT_MASK; evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT0_EVT_SHFT; + of_flags = XSCALE2_COUNT0_OVERFLOW; break; case XSCALE_COUNTER1: ien &= ~XSCALE2_COUNT1_INT_EN; evtsel &= ~XSCALE2_COUNT1_EVT_MASK; evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT1_EVT_SHFT; + of_flags = XSCALE2_COUNT1_OVERFLOW; break; case XSCALE_COUNTER2: ien &= ~XSCALE2_COUNT2_INT_EN; evtsel &= ~XSCALE2_COUNT2_EVT_MASK; evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT2_EVT_SHFT; + of_flags = XSCALE2_COUNT2_OVERFLOW; break; case XSCALE_COUNTER3: ien &= ~XSCALE2_COUNT3_INT_EN; evtsel &= ~XSCALE2_COUNT3_EVT_MASK; evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT3_EVT_SHFT; + of_flags = XSCALE2_COUNT3_OVERFLOW; break; default: WARN_ONCE(1, "invalid counter number (%d)\n", idx); @@ -701,6 +712,7 @@ xscale2pmu_disable_event(struct hw_perf_event *hwc, int idx) raw_spin_lock_irqsave(&events->pmu_lock, flags); xscale2pmu_write_event_select(evtsel); xscale2pmu_write_int_enable(ien); + xscale2pmu_write_overflow_flags(of_flags); raw_spin_unlock_irqrestore(&events->pmu_lock, flags); } diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c index 971d65c253a..008e7ce766a 100644 --- a/arch/arm/kernel/process.c +++ b/arch/arm/kernel/process.c @@ -61,8 +61,6 @@ extern void setup_mm_for_reboot(void); static volatile int hlt_counter; -#include <mach/system.h> - void disable_hlt(void) { hlt_counter++; @@ -181,13 +179,17 @@ void cpu_idle_wait(void) EXPORT_SYMBOL_GPL(cpu_idle_wait); /* - * This is our default idle handler. We need to disable - * interrupts here to ensure we don't miss a wakeup call. + * This is our default idle handler. */ + +void (*arm_pm_idle)(void); + static void default_idle(void) { - if (!need_resched()) - arch_idle(); + if (arm_pm_idle) + arm_pm_idle(); + else + cpu_do_idle(); local_irq_enable(); } @@ -215,6 +217,10 @@ void cpu_idle(void) cpu_die(); #endif + /* + * We need to disable interrupts here + * to ensure we don't miss a wakeup call. + */ local_irq_disable(); #ifdef CONFIG_PL310_ERRATA_769419 wmb(); @@ -222,19 +228,18 @@ void cpu_idle(void) if (hlt_counter) { local_irq_enable(); cpu_relax(); - } else { + } else if (!need_resched()) { stop_critical_timings(); if (cpuidle_idle_call()) pm_idle(); start_critical_timings(); /* - * This will eventually be removed - pm_idle - * functions should always return with IRQs - * enabled. + * pm_idle functions must always + * return with IRQs enabled. */ WARN_ON(irqs_disabled()); + } else local_irq_enable(); - } } leds_event(led_idle_end); rcu_idle_exit(); diff --git a/arch/arm/kernel/ptrace.c b/arch/arm/kernel/ptrace.c index e33870ff0ac..ede6443c34d 100644 --- a/arch/arm/kernel/ptrace.c +++ b/arch/arm/kernel/ptrace.c @@ -23,6 +23,7 @@ #include <linux/perf_event.h> #include <linux/hw_breakpoint.h> #include <linux/regset.h> +#include <linux/audit.h> #include <asm/pgtable.h> #include <asm/system.h> @@ -904,6 +905,12 @@ long arch_ptrace(struct task_struct *child, long request, return ret; } +#ifdef __ARMEB__ +#define AUDIT_ARCH_NR AUDIT_ARCH_ARMEB +#else +#define AUDIT_ARCH_NR AUDIT_ARCH_ARM +#endif + asmlinkage int syscall_trace(int why, struct pt_regs *regs, int scno) { unsigned long ip; @@ -918,7 +925,7 @@ asmlinkage int syscall_trace(int why, struct pt_regs *regs, int scno) if (!ip) audit_syscall_exit(regs); else - audit_syscall_entry(AUDIT_ARCH_ARMEB, scno, regs->ARM_r0, + audit_syscall_entry(AUDIT_ARCH_NR, scno, regs->ARM_r0, regs->ARM_r1, regs->ARM_r2, regs->ARM_r3); if (!test_thread_flag(TIF_SYSCALL_TRACE)) diff --git a/arch/arm/kernel/smp_twd.c b/arch/arm/kernel/smp_twd.c index 4285daa077b..7a79b24597b 100644 --- a/arch/arm/kernel/smp_twd.c +++ b/arch/arm/kernel/smp_twd.c @@ -129,7 +129,7 @@ static struct notifier_block twd_cpufreq_nb = { static int twd_cpufreq_init(void) { - if (!IS_ERR(twd_clk)) + if (twd_evt && *__this_cpu_ptr(twd_evt) && !IS_ERR(twd_clk)) return cpufreq_register_notifier(&twd_cpufreq_nb, CPUFREQ_TRANSITION_NOTIFIER); diff --git a/arch/arm/mach-at91/at91cap9.c b/arch/arm/mach-at91/at91cap9.c index a42edc25a87..8967d75c2ea 100644 --- a/arch/arm/mach-at91/at91cap9.c +++ b/arch/arm/mach-at91/at91cap9.c @@ -14,6 +14,7 @@ #include <linux/module.h> +#include <asm/proc-fns.h> #include <asm/irq.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -313,6 +314,12 @@ static struct at91_gpio_bank at91cap9_gpio[] __initdata = { } }; +static void at91cap9_idle(void) +{ + at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK); + cpu_do_idle(); +} + /* -------------------------------------------------------------------- * AT91CAP9 processor initialization * -------------------------------------------------------------------- */ @@ -332,6 +339,7 @@ static void __init at91cap9_ioremap_registers(void) static void __init at91cap9_initialize(void) { + arm_pm_idle = at91cap9_idle; arm_pm_restart = at91sam9g45_restart; at91_extern_irq = (1 << AT91CAP9_ID_IRQ0) | (1 << AT91CAP9_ID_IRQ1); diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c index 99c3174e24a..dd6e2de1342 100644 --- a/arch/arm/mach-at91/at91rm9200.c +++ b/arch/arm/mach-at91/at91rm9200.c @@ -289,6 +289,15 @@ static struct at91_gpio_bank at91rm9200_gpio[] __initdata = { } }; +static void at91rm9200_idle(void) +{ + /* + * Disable the processor clock. The processor will be automatically + * re-enabled by an interrupt or by a reset. + */ + at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK); +} + static void at91rm9200_restart(char mode, const char *cmd) { /* @@ -314,6 +323,7 @@ static void __init at91rm9200_ioremap_registers(void) static void __init at91rm9200_initialize(void) { + arm_pm_idle = at91rm9200_idle; arm_pm_restart = at91rm9200_restart; at91_extern_irq = (1 << AT91RM9200_ID_IRQ0) | (1 << AT91RM9200_ID_IRQ1) | (1 << AT91RM9200_ID_IRQ2) | (1 << AT91RM9200_ID_IRQ3) diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c index d4036ba4361..9ac8c6fe336 100644 --- a/arch/arm/mach-at91/at91sam9260.c +++ b/arch/arm/mach-at91/at91sam9260.c @@ -12,6 +12,7 @@ #include <linux/module.h> +#include <asm/proc-fns.h> #include <asm/irq.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -328,8 +329,15 @@ static void __init at91sam9260_ioremap_registers(void) at91sam9_ioremap_smc(0, AT91SAM9260_BASE_SMC); } +static void at91sam9260_idle(void) +{ + at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK); + cpu_do_idle(); +} + static void __init at91sam9260_initialize(void) { + arm_pm_idle = at91sam9260_idle; arm_pm_restart = at91sam9_alt_restart; at91_extern_irq = (1 << AT91SAM9260_ID_IRQ0) | (1 << AT91SAM9260_ID_IRQ1) | (1 << AT91SAM9260_ID_IRQ2); diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c index 023c2ff138d..ab76868f01f 100644 --- a/arch/arm/mach-at91/at91sam9261.c +++ b/arch/arm/mach-at91/at91sam9261.c @@ -12,6 +12,7 @@ #include <linux/module.h> +#include <asm/proc-fns.h> #include <asm/irq.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -286,8 +287,15 @@ static void __init at91sam9261_ioremap_registers(void) at91sam9_ioremap_smc(0, AT91SAM9261_BASE_SMC); } +static void at91sam9261_idle(void) +{ + at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK); + cpu_do_idle(); +} + static void __init at91sam9261_initialize(void) { + arm_pm_idle = at91sam9261_idle; arm_pm_restart = at91sam9_alt_restart; at91_extern_irq = (1 << AT91SAM9261_ID_IRQ0) | (1 << AT91SAM9261_ID_IRQ1) | (1 << AT91SAM9261_ID_IRQ2); diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c index 75e876c258a..247ab633abc 100644 --- a/arch/arm/mach-at91/at91sam9263.c +++ b/arch/arm/mach-at91/at91sam9263.c @@ -12,6 +12,7 @@ #include <linux/module.h> +#include <asm/proc-fns.h> #include <asm/irq.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -307,8 +308,15 @@ static void __init at91sam9263_ioremap_registers(void) at91sam9_ioremap_smc(1, AT91SAM9263_BASE_SMC1); } +static void at91sam9263_idle(void) +{ + at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK); + cpu_do_idle(); +} + static void __init at91sam9263_initialize(void) { + arm_pm_idle = at91sam9263_idle; arm_pm_restart = at91sam9_alt_restart; at91_extern_irq = (1 << AT91SAM9263_ID_IRQ0) | (1 << AT91SAM9263_ID_IRQ1); diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c index 1cb6a96b1c1..5b12192e52e 100644 --- a/arch/arm/mach-at91/at91sam9g45.c +++ b/arch/arm/mach-at91/at91sam9g45.c @@ -317,6 +317,12 @@ static struct at91_gpio_bank at91sam9g45_gpio[] __initdata = { } }; +static void at91sam9g45_idle(void) +{ + at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK); + cpu_do_idle(); +} + /* -------------------------------------------------------------------- * AT91SAM9G45 processor initialization * -------------------------------------------------------------------- */ @@ -337,6 +343,7 @@ static void __init at91sam9g45_ioremap_registers(void) static void __init at91sam9g45_initialize(void) { + arm_pm_idle = at91sam9g45_idle; arm_pm_restart = at91sam9g45_restart; at91_extern_irq = (1 << AT91SAM9G45_ID_IRQ0); diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c index b7582dd10dc..96e2adcd5a8 100644 --- a/arch/arm/mach-at91/at91sam9g45_devices.c +++ b/arch/arm/mach-at91/at91sam9g45_devices.c @@ -38,10 +38,6 @@ #if defined(CONFIG_AT_HDMAC) || defined(CONFIG_AT_HDMAC_MODULE) static u64 hdmac_dmamask = DMA_BIT_MASK(32); -static struct at_dma_platform_data atdma_pdata = { - .nr_channels = 8, -}; - static struct resource hdmac_resources[] = { [0] = { .start = AT91SAM9G45_BASE_DMA, @@ -56,12 +52,11 @@ static struct resource hdmac_resources[] = { }; static struct platform_device at_hdmac_device = { - .name = "at_hdmac", + .name = "at91sam9g45_dma", .id = -1, .dev = { .dma_mask = &hdmac_dmamask, .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &atdma_pdata, }, .resource = hdmac_resources, .num_resources = ARRAY_SIZE(hdmac_resources), @@ -69,9 +64,15 @@ static struct platform_device at_hdmac_device = { void __init at91_add_device_hdmac(void) { - dma_cap_set(DMA_MEMCPY, atdma_pdata.cap_mask); - dma_cap_set(DMA_SLAVE, atdma_pdata.cap_mask); - platform_device_register(&at_hdmac_device); +#if defined(CONFIG_OF) + struct device_node *of_node = + of_find_node_by_name(NULL, "dma-controller"); + + if (of_node) + of_node_put(of_node); + else +#endif + platform_device_register(&at_hdmac_device); } #else void __init at91_add_device_hdmac(void) {} diff --git a/arch/arm/mach-at91/at91sam9rl.c b/arch/arm/mach-at91/at91sam9rl.c index d2c91a841cb..fd60e226a98 100644 --- a/arch/arm/mach-at91/at91sam9rl.c +++ b/arch/arm/mach-at91/at91sam9rl.c @@ -11,6 +11,7 @@ #include <linux/module.h> +#include <asm/proc-fns.h> #include <asm/irq.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -291,8 +292,15 @@ static void __init at91sam9rl_ioremap_registers(void) at91sam9_ioremap_smc(0, AT91SAM9RL_BASE_SMC); } +static void at91sam9rl_idle(void) +{ + at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK); + cpu_do_idle(); +} + static void __init at91sam9rl_initialize(void) { + arm_pm_idle = at91sam9rl_idle; arm_pm_restart = at91sam9_alt_restart; at91_extern_irq = (1 << AT91SAM9RL_ID_IRQ0); diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c index 61908dce978..9be71c11d0f 100644 --- a/arch/arm/mach-at91/at91sam9rl_devices.c +++ b/arch/arm/mach-at91/at91sam9rl_devices.c @@ -33,10 +33,6 @@ #if defined(CONFIG_AT_HDMAC) || defined(CONFIG_AT_HDMAC_MODULE) static u64 hdmac_dmamask = DMA_BIT_MASK(32); -static struct at_dma_platform_data atdma_pdata = { - .nr_channels = 2, -}; - static struct resource hdmac_resources[] = { [0] = { .start = AT91SAM9RL_BASE_DMA, @@ -51,12 +47,11 @@ static struct resource hdmac_resources[] = { }; static struct platform_device at_hdmac_device = { - .name = "at_hdmac", + .name = "at91sam9rl_dma", .id = -1, .dev = { .dma_mask = &hdmac_dmamask, .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &atdma_pdata, }, .resource = hdmac_resources, .num_resources = ARRAY_SIZE(hdmac_resources), @@ -64,7 +59,6 @@ static struct platform_device at_hdmac_device = { void __init at91_add_device_hdmac(void) { - dma_cap_set(DMA_MEMCPY, atdma_pdata.cap_mask); platform_device_register(&at_hdmac_device); } #else diff --git a/arch/arm/mach-at91/at91x40.c b/arch/arm/mach-at91/at91x40.c index 56ba3bd035a..0154b7f44ff 100644 --- a/arch/arm/mach-at91/at91x40.c +++ b/arch/arm/mach-at91/at91x40.c @@ -13,6 +13,7 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/irq.h> +#include <asm/proc-fns.h> #include <asm/mach/arch.h> #include <mach/at91x40.h> #include <mach/at91_st.h> @@ -37,8 +38,19 @@ unsigned long clk_get_rate(struct clk *clk) return AT91X40_MASTER_CLOCK; } +static void at91x40_idle(void) +{ + /* + * Disable the processor clock. The processor will be automatically + * re-enabled by an interrupt or by a reset. + */ + at91_sys_write(AT91_PS_CR, AT91_PS_CR_CPU); + cpu_do_idle(); +} + void __init at91x40_initialize(unsigned long main_clock) { + arm_pm_idle = at91x40_idle; at91_extern_irq = (1 << AT91X40_ID_IRQ0) | (1 << AT91X40_ID_IRQ1) | (1 << AT91X40_ID_IRQ2); } diff --git a/arch/arm/mach-at91/include/mach/system.h b/arch/arm/mach-at91/include/mach/system.h deleted file mode 100644 index cbd64f3bcec..00000000000 --- a/arch/arm/mach-at91/include/mach/system.h +++ /dev/null @@ -1,50 +0,0 @@ -/* - * arch/arm/mach-at91/include/mach/system.h - * - * Copyright (C) 2003 SAN People - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H - -#include <mach/hardware.h> -#include <mach/at91_st.h> -#include <mach/at91_dbgu.h> -#include <mach/at91_pmc.h> - -static inline void arch_idle(void) -{ - /* - * Disable the processor clock. The processor will be automatically - * re-enabled by an interrupt or by a reset. - */ -#ifdef AT91_PS - at91_sys_write(AT91_PS_CR, AT91_PS_CR_CPU); -#else - at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK); -#endif -#ifndef CONFIG_CPU_ARM920T - /* - * Set the processor (CP15) into 'Wait for Interrupt' mode. - * Post-RM9200 processors need this in conjunction with the above - * to save power when idle. - */ - cpu_do_idle(); -#endif -} - -#endif diff --git a/arch/arm/mach-bcmring/core.c b/arch/arm/mach-bcmring/core.c index 6b67b7e8426..22e4e0a28ad 100644 --- a/arch/arm/mach-bcmring/core.c +++ b/arch/arm/mach-bcmring/core.c @@ -52,27 +52,8 @@ #include <mach/csp/chipcHw_inline.h> #include <mach/csp/tmrHw_reg.h> -#define AMBA_DEVICE(name, initname, base, plat, size) \ -static struct amba_device name##_device = { \ - .dev = { \ - .coherent_dma_mask = ~0, \ - .init_name = initname, \ - .platform_data = plat \ - }, \ - .res = { \ - .start = MM_ADDR_IO_##base, \ - .end = MM_ADDR_IO_##base + (size) - 1, \ - .flags = IORESOURCE_MEM \ - }, \ - .dma_mask = ~0, \ - .irq = { \ - IRQ_##base \ - } \ -} - - -AMBA_DEVICE(uartA, "uarta", UARTA, NULL, SZ_4K); -AMBA_DEVICE(uartB, "uartb", UARTB, NULL, SZ_4K); +static AMBA_APB_DEVICE(uartA, "uarta", MM_ADDR_IO_UARTA, { IRQ_UARTA }, NULL); +static AMBA_APB_DEVICE(uartB, "uartb", MM_ADDR_IO_UARTB, { IRQ_UARTB }, NULL); static struct clk pll1_clk = { .name = "PLL1", diff --git a/arch/arm/mach-bcmring/include/mach/system.h b/arch/arm/mach-bcmring/include/mach/system.h deleted file mode 100644 index cb78250db64..00000000000 --- a/arch/arm/mach-bcmring/include/mach/system.h +++ /dev/null @@ -1,28 +0,0 @@ -/* - * - * Copyright (C) 1999 ARM Limited - * Copyright (C) 2000 Deep Blue Solutions Ltd - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H - -static inline void arch_idle(void) -{ - cpu_do_idle(); -} - -#endif diff --git a/arch/arm/mach-clps711x/common.c b/arch/arm/mach-clps711x/common.c index ab1711b9b4d..8736c1acc16 100644 --- a/arch/arm/mach-clps711x/common.c +++ b/arch/arm/mach-clps711x/common.c @@ -225,3 +225,19 @@ void clps711x_restart(char mode, const char *cmd) { soft_restart(0); } + +static void clps711x_idle(void) +{ + clps_writel(1, HALT); + __asm__ __volatile__( + "mov r0, r0\n\ + mov r0, r0"); +} + +static int __init clps711x_idle_init(void) +{ + arm_pm_idle = clps711x_idle; + return 0; +} + +arch_initcall(clps711x_idle_init); diff --git a/arch/arm/mach-clps711x/include/mach/system.h b/arch/arm/mach-clps711x/include/mach/system.h deleted file mode 100644 index 23d6ef8c84d..00000000000 --- a/arch/arm/mach-clps711x/include/mach/system.h +++ /dev/null @@ -1,35 +0,0 @@ -/* - * arch/arm/mach-clps711x/include/mach/system.h - * - * Copyright (C) 2000 Deep Blue Solutions Ltd - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H - -#include <linux/io.h> -#include <mach/hardware.h> -#include <asm/hardware/clps7111.h> - -static inline void arch_idle(void) -{ - clps_writel(1, HALT); - __asm__ __volatile__( - "mov r0, r0\n\ - mov r0, r0"); -} - -#endif diff --git a/arch/arm/mach-cns3xxx/include/mach/system.h b/arch/arm/mach-cns3xxx/include/mach/system.h deleted file mode 100644 index 9e56b7dc133..00000000000 --- a/arch/arm/mach-cns3xxx/include/mach/system.h +++ /dev/null @@ -1,25 +0,0 @@ -/* - * Copyright 2000 Deep Blue Solutions Ltd - * Copyright 2003 ARM Limited - * Copyright 2008 Cavium Networks - * - * This file is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License, Version 2, as - * published by the Free Software Foundation. - */ - -#ifndef __MACH_SYSTEM_H -#define __MACH_SYSTEM_H - -#include <asm/proc-fns.h> - -static inline void arch_idle(void) -{ - /* - * This should do all the clock switching - * and wait for interrupt tricks - */ - cpu_do_idle(); -} - -#endif diff --git a/arch/arm/mach-davinci/include/mach/system.h b/arch/arm/mach-davinci/include/mach/system.h deleted file mode 100644 index fcb7a015aba..00000000000 --- a/arch/arm/mach-davinci/include/mach/system.h +++ /dev/null @@ -1,21 +0,0 @@ -/* - * DaVinci system defines - * - * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com> - * - * 2007 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H - -#include <mach/common.h> - -static inline void arch_idle(void) -{ - cpu_do_idle(); -} - -#endif /* __ASM_ARCH_SYSTEM_H */ diff --git a/arch/arm/mach-dove/include/mach/system.h b/arch/arm/mach-dove/include/mach/system.h deleted file mode 100644 index 3027954f616..00000000000 --- a/arch/arm/mach-dove/include/mach/system.h +++ /dev/null @@ -1,17 +0,0 @@ -/* - * arch/arm/mach-dove/include/mach/system.h - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H - -static inline void arch_idle(void) -{ - cpu_do_idle(); -} - -#endif diff --git a/arch/arm/mach-ebsa110/core.c b/arch/arm/mach-ebsa110/core.c index 294aad07f7a..804c9122b7b 100644 --- a/arch/arm/mach-ebsa110/core.c +++ b/arch/arm/mach-ebsa110/core.c @@ -271,8 +271,33 @@ static struct platform_device *ebsa110_devices[] = { &am79c961_device, }; +/* + * EBSA110 idling methodology: + * + * We can not execute the "wait for interrupt" instruction since that + * will stop our MCLK signal (which provides the clock for the glue + * logic, and therefore the timer interrupt). + * + * Instead, we spin, polling the IRQ_STAT register for the occurrence + * of any interrupt with core clock down to the memory clock. + */ +static void ebsa110_idle(void) +{ + const char *irq_stat = (char *)0xff000000; + + /* disable clock switching */ + asm volatile ("mcr p15, 0, ip, c15, c2, 2" : : : "cc"); + + /* wait for an interrupt to occur */ + while (!*irq_stat); + + /* enable clock switching */ + asm volatile ("mcr p15, 0, ip, c15, c1, 2" : : : "cc"); +} + static int __init ebsa110_init(void) { + arm_pm_idle = ebsa110_idle; return platform_add_devices(ebsa110_devices, ARRAY_SIZE(ebsa110_devices)); } diff --git a/arch/arm/mach-ebsa110/include/mach/system.h b/arch/arm/mach-ebsa110/include/mach/system.h deleted file mode 100644 index 2e4af65edb6..00000000000 --- a/arch/arm/mach-ebsa110/include/mach/system.h +++ /dev/null @@ -1,37 +0,0 @@ -/* - * arch/arm/mach-ebsa110/include/mach/system.h - * - * Copyright (C) 1996-2000 Russell King. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H - -/* - * EBSA110 idling methodology: - * - * We can not execute the "wait for interrupt" instruction since that - * will stop our MCLK signal (which provides the clock for the glue - * logic, and therefore the timer interrupt). - * - * Instead, we spin, polling the IRQ_STAT register for the occurrence - * of any interrupt with core clock down to the memory clock. - */ -static inline void arch_idle(void) -{ - const char *irq_stat = (char *)0xff000000; - - /* disable clock switching */ - asm volatile ("mcr p15, 0, ip, c15, c2, 2" : : : "cc"); - - /* wait for an interrupt to occur */ - while (!*irq_stat); - - /* enable clock switching */ - asm volatile ("mcr p15, 0, ip, c15, c1, 2" : : : "cc"); -} - -#endif diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c index b5c1dae8327..41f0d680c5e 100644 --- a/arch/arm/mach-ep93xx/core.c +++ b/arch/arm/mach-ep93xx/core.c @@ -279,48 +279,14 @@ static struct amba_pl010_data ep93xx_uart_data = { .set_mctrl = ep93xx_uart_set_mctrl, }; -static struct amba_device uart1_device = { - .dev = { - .init_name = "apb:uart1", - .platform_data = &ep93xx_uart_data, - }, - .res = { - .start = EP93XX_UART1_PHYS_BASE, - .end = EP93XX_UART1_PHYS_BASE + 0x0fff, - .flags = IORESOURCE_MEM, - }, - .irq = { IRQ_EP93XX_UART1, NO_IRQ }, - .periphid = 0x00041010, -}; - -static struct amba_device uart2_device = { - .dev = { - .init_name = "apb:uart2", - .platform_data = &ep93xx_uart_data, - }, - .res = { - .start = EP93XX_UART2_PHYS_BASE, - .end = EP93XX_UART2_PHYS_BASE + 0x0fff, - .flags = IORESOURCE_MEM, - }, - .irq = { IRQ_EP93XX_UART2, NO_IRQ }, - .periphid = 0x00041010, -}; +static AMBA_APB_DEVICE(uart1, "apb:uart1", 0x00041010, EP93XX_UART1_PHYS_BASE, + { IRQ_EP93XX_UART1 }, &ep93xx_uart_data); -static struct amba_device uart3_device = { - .dev = { - .init_name = "apb:uart3", - .platform_data = &ep93xx_uart_data, - }, - .res = { - .start = EP93XX_UART3_PHYS_BASE, - .end = EP93XX_UART3_PHYS_BASE + 0x0fff, - .flags = IORESOURCE_MEM, - }, - .irq = { IRQ_EP93XX_UART3, NO_IRQ }, - .periphid = 0x00041010, -}; +static AMBA_APB_DEVICE(uart2, "apb:uart2", 0x00041010, EP93XX_UART2_PHYS_BASE, + { IRQ_EP93XX_UART2 }, &ep93xx_uart_data); +static AMBA_APB_DEVICE(uart3, "apb:uart3", 0x00041010, EP93XX_UART3_PHYS_BASE, + { IRQ_EP93XX_UART3 }, &ep93xx_uart_data); static struct resource ep93xx_rtc_resource[] = { { diff --git a/arch/arm/mach-ep93xx/include/mach/system.h b/arch/arm/mach-ep93xx/include/mach/system.h deleted file mode 100644 index b5bec7cb9b5..00000000000 --- a/arch/arm/mach-ep93xx/include/mach/system.h +++ /dev/null @@ -1,7 +0,0 @@ -/* - * arch/arm/mach-ep93xx/include/mach/system.h - */ -static inline void arch_idle(void) -{ - cpu_do_idle(); -} diff --git a/arch/arm/mach-ep93xx/vision_ep9307.c b/arch/arm/mach-ep93xx/vision_ep9307.c index d5fb44f16d3..d67d0b4feb6 100644 --- a/arch/arm/mach-ep93xx/vision_ep9307.c +++ b/arch/arm/mach-ep93xx/vision_ep9307.c @@ -34,6 +34,7 @@ #include <mach/ep93xx_spi.h> #include <mach/gpio-ep93xx.h> +#include <asm/hardware/vic.h> #include <asm/mach-types.h> #include <asm/mach/map.h> #include <asm/mach/arch.h> @@ -361,6 +362,7 @@ MACHINE_START(VISION_EP9307, "Vision Engraving Systems EP9307") .atag_offset = 0x100, .map_io = vision_map_io, .init_irq = ep93xx_init_irq, + .handle_irq = vic_handle_irq, .timer = &ep93xx_timer, .init_machine = vision_init_machine, .restart = ep93xx_restart, diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig index 5d602f68a0e..1f81bfa15ff 100644 --- a/arch/arm/mach-exynos/Kconfig +++ b/arch/arm/mach-exynos/Kconfig @@ -183,7 +183,9 @@ config MACH_SMDKV310 select S5P_DEV_FIMC1 select S5P_DEV_FIMC2 select S5P_DEV_FIMC3 + select S5P_DEV_G2D select S5P_DEV_I2C_HDMIPHY + select S5P_DEV_JPEG select S5P_DEV_MFC select S5P_DEV_TV select S5P_DEV_USB_EHCI @@ -230,7 +232,9 @@ config MACH_UNIVERSAL_C210 select S5P_DEV_FIMC1 select S5P_DEV_FIMC2 select S5P_DEV_FIMC3 + select S5P_DEV_G2D select S5P_DEV_CSIS0 + select S5P_DEV_JPEG select S5P_DEV_FIMD0 select S3C_DEV_HSMMC select S3C_DEV_HSMMC2 @@ -268,11 +272,14 @@ config MACH_NURI select S3C_DEV_I2C1 select S3C_DEV_I2C3 select S3C_DEV_I2C5 + select S3C_DEV_I2C6 select S5P_DEV_CSIS0 + select S5P_DEV_JPEG select S5P_DEV_FIMC0 select S5P_DEV_FIMC1 select S5P_DEV_FIMC2 select S5P_DEV_FIMC3 + select S5P_DEV_G2D select S5P_DEV_MFC select S5P_DEV_USB_EHCI select S5P_SETUP_MIPIPHY @@ -283,6 +290,7 @@ config MACH_NURI select EXYNOS4_SETUP_I2C1 select EXYNOS4_SETUP_I2C3 select EXYNOS4_SETUP_I2C5 + select EXYNOS4_SETUP_I2C6 select EXYNOS4_SETUP_SDHCI select EXYNOS4_SETUP_USB_PHY select S5P_SETUP_MIPIPHY @@ -303,7 +311,9 @@ config MACH_ORIGEN select S5P_DEV_FIMC2 select S5P_DEV_FIMC3 select S5P_DEV_FIMD0 + select S5P_DEV_G2D select S5P_DEV_I2C_HDMIPHY + select S5P_DEV_JPEG select S5P_DEV_MFC select S5P_DEV_TV select S5P_DEV_USB_EHCI diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c index c59e1887100..031c1e5b3df 100644 --- a/arch/arm/mach-exynos/common.c +++ b/arch/arm/mach-exynos/common.c @@ -201,14 +201,6 @@ static struct map_desc exynos4_iodesc1[] __initdata = { }, }; -static void exynos_idle(void) -{ - if (!need_resched()) - cpu_do_idle(); - - local_irq_enable(); -} - void exynos4_restart(char mode, const char *cmd) { __raw_writel(0x1, S5P_SWRESET); @@ -467,10 +459,6 @@ early_initcall(exynos4_l2x0_cache_init); int __init exynos_init(void) { printk(KERN_INFO "EXYNOS: Initializing architecture\n"); - - /* set idle function */ - pm_idle = exynos_idle; - return device_register(&exynos4_dev); } diff --git a/arch/arm/mach-exynos/dma.c b/arch/arm/mach-exynos/dma.c index b10fcd270f0..91370def4a7 100644 --- a/arch/arm/mach-exynos/dma.c +++ b/arch/arm/mach-exynos/dma.c @@ -74,21 +74,8 @@ struct dma_pl330_platdata exynos4_pdma0_pdata = { .peri_id = pdma0_peri, }; -struct amba_device exynos4_device_pdma0 = { - .dev = { - .init_name = "dma-pl330.0", - .dma_mask = &dma_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &exynos4_pdma0_pdata, - }, - .res = { - .start = EXYNOS4_PA_PDMA0, - .end = EXYNOS4_PA_PDMA0 + SZ_4K, - .flags = IORESOURCE_MEM, - }, - .irq = {IRQ_PDMA0, NO_IRQ}, - .periphid = 0x00041330, -}; +AMBA_AHB_DEVICE(exynos4_pdma0, "dma-pl330.0", 0x00041330, EXYNOS4_PA_PDMA0, + {IRQ_PDMA0}, &exynos4_pdma0_pdata); u8 pdma1_peri[] = { DMACH_PCM0_RX, @@ -123,21 +110,8 @@ struct dma_pl330_platdata exynos4_pdma1_pdata = { .peri_id = pdma1_peri, }; -struct amba_device exynos4_device_pdma1 = { - .dev = { - .init_name = "dma-pl330.1", - .dma_mask = &dma_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &exynos4_pdma1_pdata, - }, - .res = { - .start = EXYNOS4_PA_PDMA1, - .end = EXYNOS4_PA_PDMA1 + SZ_4K, - .flags = IORESOURCE_MEM, - }, - .irq = {IRQ_PDMA1, NO_IRQ}, - .periphid = 0x00041330, -}; +AMBA_AHB_DEVICE(exynos4_pdma1, "dma-pl330.1", 0x00041330, EXYNOS4_PA_PDMA1, + {IRQ_PDMA1}, &exynos4_pdma1_pdata); static int __init exynos4_dma_init(void) { @@ -146,11 +120,11 @@ static int __init exynos4_dma_init(void) dma_cap_set(DMA_SLAVE, exynos4_pdma0_pdata.cap_mask); dma_cap_set(DMA_CYCLIC, exynos4_pdma0_pdata.cap_mask); - amba_device_register(&exynos4_device_pdma0, &iomem_resource); + amba_device_register(&exynos4_pdma0_device, &iomem_resource); dma_cap_set(DMA_SLAVE, exynos4_pdma1_pdata.cap_mask); dma_cap_set(DMA_CYCLIC, exynos4_pdma1_pdata.cap_mask); - amba_device_register(&exynos4_device_pdma1, &iomem_resource); + amba_device_register(&exynos4_pdma1_device, &iomem_resource); return 0; } diff --git a/arch/arm/mach-exynos/include/mach/system.h b/arch/arm/mach-exynos/include/mach/system.h deleted file mode 100644 index 0063a6de3dc..00000000000 --- a/arch/arm/mach-exynos/include/mach/system.h +++ /dev/null @@ -1,20 +0,0 @@ -/* linux/arch/arm/mach-exynos4/include/mach/system.h - * - * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * EXYNOS4 - system support header - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H __FILE__ - -static void arch_idle(void) -{ - /* nothing here yet */ -} -#endif /* __ASM_ARCH_SYSTEM_H */ diff --git a/arch/arm/mach-exynos/mach-nuri.c b/arch/arm/mach-exynos/mach-nuri.c index 435261f83f4..32bb7b37975 100644 --- a/arch/arm/mach-exynos/mach-nuri.c +++ b/arch/arm/mach-exynos/mach-nuri.c @@ -28,6 +28,7 @@ #include <video/platform_lcd.h> #include <media/m5mols.h> +#include <media/s5k6aa.h> #include <media/s5p_fimc.h> #include <media/v4l2-mediabus.h> @@ -75,6 +76,7 @@ enum fixed_regulator_id { FIXED_REG_ID_MAX8903, FIXED_REG_ID_CAM_A28V, FIXED_REG_ID_CAM_12V, + FIXED_REG_ID_CAM_VT_15V, }; static struct s3c2410_uartcfg nuri_uartcfgs[] __initdata = { @@ -399,6 +401,9 @@ static struct regulator_consumer_supply __initdata max8997_ldo4_[] = { static struct regulator_consumer_supply __initdata max8997_ldo5_[] = { REGULATOR_SUPPLY("vhsic", "modemctl"), /* MODEM */ }; +static struct regulator_consumer_supply nuri_max8997_ldo6_consumer[] = { + REGULATOR_SUPPLY("vdd_reg", "6-003c"), /* S5K6AA camera */ +}; static struct regulator_consumer_supply __initdata max8997_ldo7_[] = { REGULATOR_SUPPLY("dig_18", "0-001f"), /* HCD803 */ }; @@ -431,7 +436,7 @@ static struct regulator_consumer_supply __initdata max8997_buck1_[] = { REGULATOR_SUPPLY("vdd_arm", NULL), /* CPUFREQ */ }; static struct regulator_consumer_supply __initdata max8997_buck2_[] = { - REGULATOR_SUPPLY("vdd_int", NULL), /* CPUFREQ */ + REGULATOR_SUPPLY("vdd_int", "exynos4210-busfreq.0"), /* CPUFREQ */ }; static struct regulator_consumer_supply __initdata max8997_buck3_[] = { REGULATOR_SUPPLY("vdd", "mali_dev.0"), /* G3D of Exynos 4 */ @@ -546,6 +551,8 @@ static struct regulator_init_data __initdata max8997_ldo6_data = { .enabled = 1, }, }, + .num_consumer_supplies = ARRAY_SIZE(nuri_max8997_ldo6_consumer), + .consumer_supplies = nuri_max8997_ldo6_consumer, }; static struct regulator_init_data __initdata max8997_ldo7_data = { @@ -742,7 +749,7 @@ static struct regulator_init_data __initdata max8997_buck2_data = { .constraints = { .name = "VINT_1.1V_C210", .min_uV = 900000, - .max_uV = 1100000, + .max_uV = 1200000, .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, .always_on = 1, .state_mem = { @@ -957,7 +964,6 @@ static struct max8997_platform_data __initdata nuri_max8997_pdata = { .regulators = nuri_max8997_regulators, .buck125_gpios = { EXYNOS4_GPX0(5), EXYNOS4_GPX0(6), EXYNOS4_GPL0(0) }, - .buck2_gpiodvs = true, .buck1_voltage[0] = 1350000, /* 1.35V */ .buck1_voltage[1] = 1300000, /* 1.3V */ @@ -1116,7 +1122,30 @@ static void __init nuri_ehci_init(void) } /* CAMERA */ +static struct regulator_consumer_supply cam_vt_cam15_supply = + REGULATOR_SUPPLY("vdd_core", "6-003c"); + +static struct regulator_init_data cam_vt_cam15_reg_init_data = { + .constraints = { .valid_ops_mask = REGULATOR_CHANGE_STATUS }, + .num_consumer_supplies = 1, + .consumer_supplies = &cam_vt_cam15_supply, +}; + +static struct fixed_voltage_config cam_vt_cam15_fixed_voltage_cfg = { + .supply_name = "VT_CAM_1.5V", + .microvolts = 1500000, + .gpio = EXYNOS4_GPE2(2), /* VT_CAM_1.5V_EN */ + .enable_high = 1, + .init_data = &cam_vt_cam15_reg_init_data, +}; + +static struct platform_device cam_vt_cam15_fixed_rdev = { + .name = "reg-fixed-voltage", .id = FIXED_REG_ID_CAM_VT_15V, + .dev = { .platform_data = &cam_vt_cam15_fixed_voltage_cfg }, +}; + static struct regulator_consumer_supply cam_vdda_supply[] = { + REGULATOR_SUPPLY("vdda", "6-003c"), REGULATOR_SUPPLY("a_sensor", "0-001f"), }; @@ -1173,6 +1202,21 @@ static struct s5p_platform_mipi_csis mipi_csis_platdata = { #define GPIO_CAM_MEGA_RST EXYNOS4_GPY3(7) /* ISP_RESET */ #define GPIO_CAM_8M_ISP_INT EXYNOS4_GPL2(5) +#define GPIO_CAM_VT_NSTBY EXYNOS4_GPL2(0) +#define GPIO_CAM_VT_NRST EXYNOS4_GPL2(1) + +static struct s5k6aa_platform_data s5k6aa_pldata = { + .mclk_frequency = 24000000UL, + .gpio_reset = { GPIO_CAM_VT_NRST, 0 }, + .gpio_stby = { GPIO_CAM_VT_NSTBY, 0 }, + .bus_type = V4L2_MBUS_PARALLEL, + .horiz_flip = 1, +}; + +static struct i2c_board_info s5k6aa_board_info = { + I2C_BOARD_INFO("S5K6AA", 0x3c), + .platform_data = &s5k6aa_pldata, +}; static struct m5mols_platform_data m5mols_platdata = { .gpio_reset = GPIO_CAM_MEGA_RST, @@ -1185,6 +1229,13 @@ static struct i2c_board_info m5mols_board_info = { static struct s5p_fimc_isp_info nuri_camera_sensors[] = { { + .flags = V4L2_MBUS_PCLK_SAMPLE_RISING | + V4L2_MBUS_VSYNC_ACTIVE_LOW, + .bus_type = FIMC_ITU_601, + .board_info = &s5k6aa_board_info, + .clk_frequency = 24000000UL, + .i2c_bus_num = 6, + }, { .flags = V4L2_MBUS_PCLK_SAMPLE_FALLING | V4L2_MBUS_VSYNC_ACTIVE_LOW, .bus_type = FIMC_MIPI_CSI2, @@ -1200,11 +1251,13 @@ static struct s5p_platform_fimc fimc_md_platdata = { }; static struct gpio nuri_camera_gpios[] = { + { GPIO_CAM_VT_NSTBY, GPIOF_OUT_INIT_LOW, "CAM_VGA_NSTBY" }, + { GPIO_CAM_VT_NRST, GPIOF_OUT_INIT_LOW, "CAM_VGA_NRST" }, { GPIO_CAM_8M_ISP_INT, GPIOF_IN, "8M_ISP_INT" }, { GPIO_CAM_MEGA_RST, GPIOF_OUT_INIT_LOW, "CAM_8M_NRST" }, }; -static void nuri_camera_init(void) +static void __init nuri_camera_init(void) { s3c_set_platdata(&mipi_csis_platdata, sizeof(mipi_csis_platdata), &s5p_device_mipi_csis0); @@ -1224,6 +1277,8 @@ static void nuri_camera_init(void) pr_err("%s: Failed to configure 8M_ISP_INT GPIO\n", __func__); /* Free GPIOs controlled directly by the sensor drivers. */ + gpio_free(GPIO_CAM_VT_NRST); + gpio_free(GPIO_CAM_VT_NSTBY); gpio_free(GPIO_CAM_MEGA_RST); if (exynos4_fimc_setup_gpio(S5P_CAMPORT_A)) { @@ -1234,15 +1289,27 @@ static void nuri_camera_init(void) s5p_gpio_set_drvstr(EXYNOS4_GPJ1(3), S5P_GPIO_DRVSTR_LV4); } +static struct s3c2410_platform_i2c nuri_i2c6_platdata __initdata = { + .frequency = 400000U, + .sda_delay = 200, + .bus_num = 6, +}; + static struct s3c2410_platform_i2c nuri_i2c0_platdata __initdata = { .frequency = 400000U, .sda_delay = 200, }; +/* DEVFREQ controlling memory/bus */ +static struct platform_device exynos4_bus_devfreq = { + .name = "exynos4210-busfreq", +}; + static struct platform_device *nuri_devices[] __initdata = { /* Samsung Platform Devices */ &s3c_device_i2c5, /* PMIC should initialize first */ &s3c_device_i2c0, + &s3c_device_i2c6, &emmc_fixed_voltage, &s5p_device_mipi_csis0, &s5p_device_fimc0, @@ -1259,6 +1326,8 @@ static struct platform_device *nuri_devices[] __initdata = { &s3c_device_i2c3, &i2c9_gpio, &s3c_device_adc, + &s5p_device_g2d, + &s5p_device_jpeg, &s3c_device_rtc, &s5p_device_mfc, &s5p_device_mfc_l, @@ -1274,8 +1343,10 @@ static struct platform_device *nuri_devices[] __initdata = { &nuri_backlight_device, &max8903_fixed_reg_dev, &nuri_max8903_device, + &cam_vt_cam15_fixed_rdev, &cam_vdda_fixed_rdev, &cam_8m_12v_fixed_rdev, + &exynos4_bus_devfreq, }; static void __init nuri_map_io(void) @@ -1305,6 +1376,7 @@ static void __init nuri_machine_init(void) i2c_register_board_info(5, i2c5_devs, ARRAY_SIZE(i2c5_devs)); i2c9_devs[I2C9_MAX17042].irq = gpio_to_irq(EXYNOS4_GPX2(3)); i2c_register_board_info(9, i2c9_devs, ARRAY_SIZE(i2c9_devs)); + s3c_i2c6_set_platdata(&nuri_i2c6_platdata); s5p_fimd0_set_platdata(&nuri_fb_pdata); diff --git a/arch/arm/mach-exynos/mach-origen.c b/arch/arm/mach-exynos/mach-origen.c index 0679b8ad2d1..686d1826c05 100644 --- a/arch/arm/mach-exynos/mach-origen.c +++ b/arch/arm/mach-exynos/mach-origen.c @@ -20,6 +20,7 @@ #include <linux/regulator/machine.h> #include <linux/mfd/max8997.h> #include <linux/lcd.h> +#include <linux/rfkill-gpio.h> #include <asm/mach/arch.h> #include <asm/hardware/gic.h> @@ -235,6 +236,7 @@ static struct regulator_init_data __initdata max8997_ldo9_data = { .min_uV = 2800000, .max_uV = 2800000, .apply_uV = 1, + .always_on = 1, .valid_ops_mask = REGULATOR_CHANGE_STATUS, .state_mem = { .disabled = 1, @@ -278,6 +280,7 @@ static struct regulator_init_data __initdata max8997_ldo14_data = { .min_uV = 1800000, .max_uV = 1800000, .apply_uV = 1, + .always_on = 1, .valid_ops_mask = REGULATOR_CHANGE_STATUS, .state_mem = { .disabled = 1, @@ -293,6 +296,7 @@ static struct regulator_init_data __initdata max8997_ldo17_data = { .min_uV = 3300000, .max_uV = 3300000, .apply_uV = 1, + .always_on = 1, .valid_ops_mask = REGULATOR_CHANGE_STATUS, .state_mem = { .disabled = 1, @@ -602,6 +606,23 @@ static struct s3c_fb_platdata origen_lcd_pdata __initdata = { .setup_gpio = exynos4_fimd0_gpio_setup_24bpp, }; +/* Bluetooth rfkill gpio platform data */ +struct rfkill_gpio_platform_data origen_bt_pdata = { + .reset_gpio = EXYNOS4_GPX2(2), + .shutdown_gpio = -1, + .type = RFKILL_TYPE_BLUETOOTH, + .name = "origen-bt", +}; + +/* Bluetooth Platform device */ +static struct platform_device origen_device_bluetooth = { + .name = "rfkill_gpio", + .id = -1, + .dev = { + .platform_data = &origen_bt_pdata, + }, +}; + static struct platform_device *origen_devices[] __initdata = { &s3c_device_hsmmc2, &s3c_device_hsmmc0, @@ -613,9 +634,12 @@ static struct platform_device *origen_devices[] __initdata = { &s5p_device_fimc1, &s5p_device_fimc2, &s5p_device_fimc3, + &s5p_device_fimc_md, &s5p_device_fimd0, + &s5p_device_g2d, &s5p_device_hdmi, &s5p_device_i2c_hdmiphy, + &s5p_device_jpeg, &s5p_device_mfc, &s5p_device_mfc_l, &s5p_device_mfc_r, @@ -630,6 +654,7 @@ static struct platform_device *origen_devices[] __initdata = { &exynos4_device_pd[PD_MFC], &origen_device_gpiokeys, &origen_lcd_hv070wsa, + &origen_device_bluetooth, }; /* LCD Backlight data */ @@ -643,6 +668,16 @@ static struct platform_pwm_backlight_data origen_bl_data = { .pwm_period_ns = 1000, }; +static void __init origen_bt_setup(void) +{ + gpio_request(EXYNOS4_GPA0(0), "GPIO BT_UART"); + /* 4 UART Pins configuration */ + s3c_gpio_cfgrange_nopull(EXYNOS4_GPA0(0), 4, S3C_GPIO_SFN(2)); + /* Setup BT Reset, this gpio will be requesed by rfkill-gpio */ + s3c_gpio_cfgpin(EXYNOS4_GPX2(2), S3C_GPIO_OUTPUT); + s3c_gpio_setpull(EXYNOS4_GPX2(2), S3C_GPIO_PULL_NONE); +} + static void s5p_tv_setup(void) { /* Direct HPD to HDMI chip */ @@ -703,6 +738,8 @@ static void __init origen_machine_init(void) s5p_device_mfc.dev.parent = &exynos4_device_pd[PD_MFC].dev; samsung_bl_set(&origen_bl_gpio_info, &origen_bl_data); + + origen_bt_setup(); } MACHINE_START(ORIGEN, "ORIGEN") diff --git a/arch/arm/mach-exynos/mach-smdkv310.c b/arch/arm/mach-exynos/mach-smdkv310.c index b2c5557f50e..5a2a21e6938 100644 --- a/arch/arm/mach-exynos/mach-smdkv310.c +++ b/arch/arm/mach-exynos/mach-smdkv310.c @@ -270,6 +270,9 @@ static struct platform_device *smdkv310_devices[] __initdata = { &s5p_device_fimc1, &s5p_device_fimc2, &s5p_device_fimc3, + &s5p_device_fimc_md, + &s5p_device_g2d, + &s5p_device_jpeg, &exynos4_device_ac97, &exynos4_device_i2s0, &exynos4_device_ohci, diff --git a/arch/arm/mach-exynos/mach-universal_c210.c b/arch/arm/mach-exynos/mach-universal_c210.c index 0fc65ffde8f..bdc7a220a81 100644 --- a/arch/arm/mach-exynos/mach-universal_c210.c +++ b/arch/arm/mach-exynos/mach-universal_c210.c @@ -13,6 +13,7 @@ #include <linux/i2c.h> #include <linux/gpio_keys.h> #include <linux/gpio.h> +#include <linux/interrupt.h> #include <linux/fb.h> #include <linux/mfd/max8998.h> #include <linux/regulator/machine.h> @@ -46,6 +47,7 @@ #include <media/v4l2-mediabus.h> #include <media/s5p_fimc.h> #include <media/m5mols.h> +#include <media/s5k6aa.h> #include "common.h" @@ -122,8 +124,10 @@ static struct regulator_consumer_supply lp3974_buck1_consumer = static struct regulator_consumer_supply lp3974_buck2_consumer = REGULATOR_SUPPLY("vddg3d", NULL); -static struct regulator_consumer_supply lp3974_buck3_consumer = - REGULATOR_SUPPLY("vdet", "s5p-sdo"); +static struct regulator_consumer_supply lp3974_buck3_consumer[] = { + REGULATOR_SUPPLY("vdet", "s5p-sdo"), + REGULATOR_SUPPLY("vdd_reg", "0-003c"), +}; static struct regulator_init_data lp3974_buck1_data = { .constraints = { @@ -168,8 +172,8 @@ static struct regulator_init_data lp3974_buck3_data = { .enabled = 1, }, }, - .num_consumer_supplies = 1, - .consumer_supplies = &lp3974_buck3_consumer, + .num_consumer_supplies = ARRAY_SIZE(lp3974_buck3_consumer), + .consumer_supplies = lp3974_buck3_consumer, }; static struct regulator_init_data lp3974_buck4_data = { @@ -302,6 +306,9 @@ static struct regulator_init_data lp3974_ldo8_data = { .consumer_supplies = lp3974_ldo8_consumer, }; +static struct regulator_consumer_supply lp3974_ldo9_consumer = + REGULATOR_SUPPLY("vddio", "0-003c"); + static struct regulator_init_data lp3974_ldo9_data = { .constraints = { .name = "VCC_2.8V", @@ -313,6 +320,8 @@ static struct regulator_init_data lp3974_ldo9_data = { .enabled = 1, }, }, + .num_consumer_supplies = 1, + .consumer_supplies = &lp3974_ldo9_consumer, }; static struct regulator_init_data lp3974_ldo10_data = { @@ -411,6 +420,7 @@ static struct regulator_init_data lp3974_ldo15_data = { }; static struct regulator_consumer_supply lp3974_ldo16_consumer[] = { + REGULATOR_SUPPLY("vdda", "0-003c"), REGULATOR_SUPPLY("a_sensor", "0-001f"), }; @@ -595,6 +605,7 @@ static struct mxt_platform_data qt602240_platform_data = { .threshold = 0x28, .voltage = 2800000, /* 2.8V */ .orient = MXT_DIAGONAL, + .irqflags = IRQF_TRIGGER_FALLING, }; static struct i2c_board_info i2c3_devs[] __initdata = { @@ -817,6 +828,8 @@ static struct s3c_fb_pd_win universal_fb_win0 = { }, .max_bpp = 32, .default_bpp = 16, + .virtual_x = 480, + .virtual_y = 2 * 800, }; static struct s3c_fb_platdata universal_lcd_pdata __initdata = { @@ -828,6 +841,28 @@ static struct s3c_fb_platdata universal_lcd_pdata __initdata = { .setup_gpio = exynos4_fimd0_gpio_setup_24bpp, }; +static struct regulator_consumer_supply cam_vt_dio_supply = + REGULATOR_SUPPLY("vdd_core", "0-003c"); + +static struct regulator_init_data cam_vt_dio_reg_init_data = { + .constraints = { .valid_ops_mask = REGULATOR_CHANGE_STATUS }, + .num_consumer_supplies = 1, + .consumer_supplies = &cam_vt_dio_supply, +}; + +static struct fixed_voltage_config cam_vt_dio_fixed_voltage_cfg = { + .supply_name = "CAM_VT_D_IO", + .microvolts = 2800000, + .gpio = EXYNOS4_GPE2(1), /* CAM_PWR_EN2 */ + .enable_high = 1, + .init_data = &cam_vt_dio_reg_init_data, +}; + +static struct platform_device cam_vt_dio_fixed_reg_dev = { + .name = "reg-fixed-voltage", .id = FIXED_REG_ID_CAM_VT_DIO, + .dev = { .platform_data = &cam_vt_dio_fixed_voltage_cfg }, +}; + static struct regulator_consumer_supply cam_i_core_supply = REGULATOR_SUPPLY("core", "0-001f"); @@ -883,6 +918,28 @@ static struct s5p_platform_mipi_csis mipi_csis_platdata = { #define GPIO_CAM_LEVEL_EN(n) EXYNOS4_GPE4(n + 3) #define GPIO_CAM_8M_ISP_INT EXYNOS4_GPX1(5) /* XEINT_13 */ #define GPIO_CAM_MEGA_nRST EXYNOS4_GPE2(5) +#define GPIO_CAM_VGA_NRST EXYNOS4_GPE4(7) +#define GPIO_CAM_VGA_NSTBY EXYNOS4_GPE4(6) + +static int s5k6aa_set_power(int on) +{ + gpio_set_value(GPIO_CAM_LEVEL_EN(2), !!on); + return 0; +} + +static struct s5k6aa_platform_data s5k6aa_platdata = { + .mclk_frequency = 21600000UL, + .gpio_reset = { GPIO_CAM_VGA_NRST, 0 }, + .gpio_stby = { GPIO_CAM_VGA_NSTBY, 0 }, + .bus_type = V4L2_MBUS_PARALLEL, + .horiz_flip = 1, + .set_power = s5k6aa_set_power, +}; + +static struct i2c_board_info s5k6aa_board_info = { + I2C_BOARD_INFO("S5K6AA", 0x3C), + .platform_data = &s5k6aa_platdata, +}; static int m5mols_set_power(struct device *dev, int on) { @@ -907,6 +964,14 @@ static struct s5p_fimc_isp_info universal_camera_sensors[] = { .mux_id = 0, .flags = V4L2_MBUS_PCLK_SAMPLE_FALLING | V4L2_MBUS_VSYNC_ACTIVE_LOW, + .bus_type = FIMC_ITU_601, + .board_info = &s5k6aa_board_info, + .i2c_bus_num = 0, + .clk_frequency = 24000000UL, + }, { + .mux_id = 0, + .flags = V4L2_MBUS_PCLK_SAMPLE_FALLING | + V4L2_MBUS_VSYNC_ACTIVE_LOW, .bus_type = FIMC_MIPI_CSI2, .board_info = &m5mols_board_info, .i2c_bus_num = 0, @@ -925,9 +990,11 @@ static struct gpio universal_camera_gpios[] = { { GPIO_CAM_LEVEL_EN(2), GPIOF_OUT_INIT_LOW, "CAM_LVL_EN2" }, { GPIO_CAM_8M_ISP_INT, GPIOF_IN, "8M_ISP_INT" }, { GPIO_CAM_MEGA_nRST, GPIOF_OUT_INIT_LOW, "CAM_8M_NRST" }, + { GPIO_CAM_VGA_NRST, GPIOF_OUT_INIT_LOW, "CAM_VGA_NRST" }, + { GPIO_CAM_VGA_NSTBY, GPIOF_OUT_INIT_LOW, "CAM_VGA_NSTBY" }, }; -static void universal_camera_init(void) +static void __init universal_camera_init(void) { s3c_set_platdata(&mipi_csis_platdata, sizeof(mipi_csis_platdata), &s5p_device_mipi_csis0); @@ -948,6 +1015,8 @@ static void universal_camera_init(void) /* Free GPIOs controlled directly by the sensor drivers. */ gpio_free(GPIO_CAM_MEGA_nRST); gpio_free(GPIO_CAM_8M_ISP_INT); + gpio_free(GPIO_CAM_VGA_NRST); + gpio_free(GPIO_CAM_VGA_NSTBY); if (exynos4_fimc_setup_gpio(S5P_CAMPORT_A)) pr_err("Camera port A setup failed\n"); @@ -960,6 +1029,7 @@ static struct platform_device *universal_devices[] __initdata = { &s5p_device_fimc1, &s5p_device_fimc2, &s5p_device_fimc3, + &s5p_device_g2d, &mmc0_fixed_voltage, &s3c_device_hsmmc0, &s3c_device_hsmmc2, @@ -979,12 +1049,14 @@ static struct platform_device *universal_devices[] __initdata = { &universal_gpio_keys, &s5p_device_onenand, &s5p_device_fimd0, + &s5p_device_jpeg, &s5p_device_mfc, &s5p_device_mfc_l, &s5p_device_mfc_r, &exynos4_device_pd[PD_MFC], &exynos4_device_pd[PD_LCD0], &exynos4_device_pd[PD_CAM], + &cam_vt_dio_fixed_reg_dev, &cam_i_core_fixed_reg_dev, &cam_s_if_fixed_reg_dev, &s5p_device_fimc_md, diff --git a/arch/arm/mach-footbridge/include/mach/system.h b/arch/arm/mach-footbridge/include/mach/system.h deleted file mode 100644 index a174a5841bc..00000000000 --- a/arch/arm/mach-footbridge/include/mach/system.h +++ /dev/null @@ -1,13 +0,0 @@ -/* - * arch/arm/mach-footbridge/include/mach/system.h - * - * Copyright (C) 1996-1999 Russell King. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -static inline void arch_idle(void) -{ - cpu_do_idle(); -} diff --git a/arch/arm/mach-gemini/Makefile b/arch/arm/mach-gemini/Makefile index c5b24b95a76..7355c0bbcb5 100644 --- a/arch/arm/mach-gemini/Makefile +++ b/arch/arm/mach-gemini/Makefile @@ -4,7 +4,7 @@ # Object file lists. -obj-y := irq.o mm.o time.o devices.o gpio.o +obj-y := irq.o mm.o time.o devices.o gpio.o idle.o # Board-specific support obj-$(CONFIG_MACH_NAS4220B) += board-nas4220b.o diff --git a/arch/arm/mach-gemini/idle.c b/arch/arm/mach-gemini/idle.c new file mode 100644 index 00000000000..92bbd6bb600 --- /dev/null +++ b/arch/arm/mach-gemini/idle.c @@ -0,0 +1,29 @@ +/* + * arch/arm/mach-gemini/idle.c + */ + +#include <linux/init.h> +#include <asm/system.h> +#include <asm/proc-fns.h> + +static void gemini_idle(void) +{ + /* + * Because of broken hardware we have to enable interrupts or the CPU + * will never wakeup... Acctualy it is not very good to enable + * interrupts first since scheduler can miss a tick, but there is + * no other way around this. Platforms that needs it for power saving + * should call enable_hlt() in init code, since by default it is + * disabled. + */ + local_irq_enable(); + cpu_do_idle(); +} + +static int __init gemini_idle_init(void) +{ + arm_pm_idle = gemini_idle; + return 0; +} + +arch_initcall(gemini_idle_init); diff --git a/arch/arm/mach-gemini/include/mach/system.h b/arch/arm/mach-gemini/include/mach/system.h index 4d9c1f87247..a33b5a1f8ab 100644 --- a/arch/arm/mach-gemini/include/mach/system.h +++ b/arch/arm/mach-gemini/include/mach/system.h @@ -14,20 +14,6 @@ #include <mach/hardware.h> #include <mach/global_reg.h> -static inline void arch_idle(void) -{ - /* - * Because of broken hardware we have to enable interrupts or the CPU - * will never wakeup... Acctualy it is not very good to enable - * interrupts here since scheduler can miss a tick, but there is - * no other way around this. Platforms that needs it for power saving - * should call enable_hlt() in init code, since by default it is - * disabled. - */ - local_irq_enable(); - cpu_do_idle(); -} - static inline void arch_reset(char mode, const char *cmd) { __raw_writel(RESET_GLOBAL | RESET_CPU1, diff --git a/arch/arm/mach-gemini/irq.c b/arch/arm/mach-gemini/irq.c index 9485a8fdf85..ca70e5fcc7a 100644 --- a/arch/arm/mach-gemini/irq.c +++ b/arch/arm/mach-gemini/irq.c @@ -73,8 +73,8 @@ void __init gemini_init_irq(void) unsigned int i, mode = 0, level = 0; /* - * Disable arch_idle() by default since it is buggy - * For more info see arch/arm/mach-gemini/include/mach/system.h + * Disable the idle handler by default since it is buggy + * For more info see arch/arm/mach-gemini/idle.c */ disable_hlt(); diff --git a/arch/arm/mach-h720x/common.c b/arch/arm/mach-h720x/common.c index f8a2f6bb548..e756d1ac00c 100644 --- a/arch/arm/mach-h720x/common.c +++ b/arch/arm/mach-h720x/common.c @@ -247,3 +247,21 @@ void h720x_restart(char mode, const char *cmd) { CPU_REG (PMU_BASE, PMU_STAT) |= PMU_WARMRESET; } + +static void h720x__idle(void) +{ + CPU_REG (PMU_BASE, PMU_MODE) = PMU_MODE_IDLE; + nop(); + nop(); + CPU_REG (PMU_BASE, PMU_MODE) = PMU_MODE_RUN; + nop(); + nop(); +} + +static int __init h720x_idle_init(void) +{ + arm_pm_idle = h720x__idle; + return 0; +} + +arch_initcall(h720x_idle_init); diff --git a/arch/arm/mach-h720x/include/mach/system.h b/arch/arm/mach-h720x/include/mach/system.h deleted file mode 100644 index 16ac46e239a..00000000000 --- a/arch/arm/mach-h720x/include/mach/system.h +++ /dev/null @@ -1,27 +0,0 @@ -/* - * arch/arm/mach-h720x/include/mach/system.h - * - * Copyright (C) 2001-2002 Jungjun Kim, Hynix Semiconductor Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * arch/arm/mach-h720x/include/mach/system.h - * - */ - -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H -#include <mach/hardware.h> - -static void arch_idle(void) -{ - CPU_REG (PMU_BASE, PMU_MODE) = PMU_MODE_IDLE; - nop(); - nop(); - CPU_REG (PMU_BASE, PMU_MODE) = PMU_MODE_RUN; - nop(); - nop(); -} - -#endif diff --git a/arch/arm/mach-highbank/include/mach/system.h b/arch/arm/mach-highbank/include/mach/system.h deleted file mode 100644 index b1d8b5fbe37..00000000000 --- a/arch/arm/mach-highbank/include/mach/system.h +++ /dev/null @@ -1,24 +0,0 @@ -/* - * Copyright 2010-2011 Calxeda, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program. If not, see <http://www.gnu.org/licenses/>. - */ -#ifndef __MACH_SYSTEM_H -#define __MACH_SYSTEM_H - -static inline void arch_idle(void) -{ - cpu_do_idle(); -} - -#endif diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index 3919fba52ac..37a5d715a6c 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -314,8 +314,10 @@ config MACH_IMX27_VISSTRIM_M10 select IMX_HAVE_PLATFORM_IMX_I2C select IMX_HAVE_PLATFORM_IMX_SSI select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_MXC_MMC + select IMX_HAVE_PLATFORM_MX2_CAMERA select IMX_HAVE_PLATFORM_MXC_EHCI + select IMX_HAVE_PLATFORM_MXC_MMC + select LEDS_GPIO_REGISTER help Include support for Visstrim_m10 platform and its different variants. This includes specific configurations for the board and its @@ -486,6 +488,7 @@ config MACH_MX31MOBOARD bool "Support mx31moboard platforms (EPFL Mobots group)" select SOC_IMX31 select IMX_HAVE_PLATFORM_FSL_USB2_UDC + select IMX_HAVE_PLATFORM_IMX2_WDT select IMX_HAVE_PLATFORM_IMX_I2C select IMX_HAVE_PLATFORM_IMX_UART select IMX_HAVE_PLATFORM_IPU_CORE diff --git a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c index 428459fbca4..f7b074f496f 100644 --- a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c +++ b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c @@ -30,6 +30,10 @@ #include <linux/input.h> #include <linux/gpio.h> #include <linux/delay.h> +#include <linux/dma-mapping.h> +#include <linux/leds.h> +#include <linux/memblock.h> +#include <media/soc_camera.h> #include <sound/tlv320aic32x4.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -39,6 +43,8 @@ #include "devices-imx27.h" +#define TVP5150_RSTN (GPIO_PORTC + 18) +#define TVP5150_PWDN (GPIO_PORTC + 19) #define OTG_PHY_CS_GPIO (GPIO_PORTF + 17) #define SDHC1_IRQ IRQ_GPIOB(25) @@ -100,8 +106,99 @@ static const int visstrim_m10_pins[] __initconst = { PE1_PF_USBOTG_STP, PB23_PF_USB_PWR, PB24_PF_USB_OC, + /* CSI */ + PB10_PF_CSI_D0, + PB11_PF_CSI_D1, + PB12_PF_CSI_D2, + PB13_PF_CSI_D3, + PB14_PF_CSI_D4, + PB15_PF_CSI_MCLK, + PB16_PF_CSI_PIXCLK, + PB17_PF_CSI_D5, + PB18_PF_CSI_D6, + PB19_PF_CSI_D7, + PB20_PF_CSI_VSYNC, + PB21_PF_CSI_HSYNC, }; +/* Camera */ +static int visstrim_camera_power(struct device *dev, int on) +{ + gpio_set_value(TVP5150_PWDN, on); + + return 0; +}; + +static int visstrim_camera_reset(struct device *dev) +{ + gpio_set_value(TVP5150_RSTN, 0); + ndelay(500); + gpio_set_value(TVP5150_RSTN, 1); + + return 0; +}; + +static struct i2c_board_info visstrim_i2c_camera = { + I2C_BOARD_INFO("tvp5150", 0x5d), +}; + +static struct soc_camera_link iclink_tvp5150 = { + .bus_id = 0, + .board_info = &visstrim_i2c_camera, + .i2c_adapter_id = 0, + .power = visstrim_camera_power, + .reset = visstrim_camera_reset, +}; + +static struct mx2_camera_platform_data visstrim_camera = { + .flags = MX2_CAMERA_CCIR | MX2_CAMERA_CCIR_INTERLACE | + MX2_CAMERA_SWAP16 | MX2_CAMERA_PCLK_SAMPLE_RISING, + .clk = 100000, +}; + +static phys_addr_t mx2_camera_base __initdata; +#define MX2_CAMERA_BUF_SIZE SZ_8M + +static void __init visstrim_camera_init(void) +{ + struct platform_device *pdev; + int dma; + + /* Initialize tvp5150 gpios */ + mxc_gpio_mode(TVP5150_RSTN | GPIO_GPIO | GPIO_OUT); + mxc_gpio_mode(TVP5150_PWDN | GPIO_GPIO | GPIO_OUT); + gpio_set_value(TVP5150_RSTN, 1); + gpio_set_value(TVP5150_PWDN, 0); + ndelay(1); + + gpio_set_value(TVP5150_PWDN, 1); + ndelay(1); + gpio_set_value(TVP5150_RSTN, 0); + ndelay(500); + gpio_set_value(TVP5150_RSTN, 1); + ndelay(200000); + + pdev = imx27_add_mx2_camera(&visstrim_camera); + if (IS_ERR(pdev)) + return; + + dma = dma_declare_coherent_memory(&pdev->dev, + mx2_camera_base, mx2_camera_base, + MX2_CAMERA_BUF_SIZE, + DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE); + if (!(dma & DMA_MEMORY_MAP)) + return; +} + +static void __init visstrim_reserve(void) +{ + /* reserve 4 MiB for mx2-camera */ + mx2_camera_base = memblock_alloc(MX2_CAMERA_BUF_SIZE, + MX2_CAMERA_BUF_SIZE); + memblock_free(mx2_camera_base, MX2_CAMERA_BUF_SIZE); + memblock_remove(mx2_camera_base, MX2_CAMERA_BUF_SIZE); +} + /* GPIOs used as events for applications */ static struct gpio_keys_button visstrim_gpio_keys[] = { { @@ -136,6 +233,35 @@ static const struct gpio_keys_platform_data .nbuttons = ARRAY_SIZE(visstrim_gpio_keys), }; +/* led */ +static const struct gpio_led visstrim_m10_leds[] __initconst = { + { + .name = "visstrim:ld0", + .default_trigger = "nand-disk", + .gpio = (GPIO_PORTC + 29), + }, + { + .name = "visstrim:ld1", + .default_trigger = "nand-disk", + .gpio = (GPIO_PORTC + 24), + }, + { + .name = "visstrim:ld2", + .default_trigger = "nand-disk", + .gpio = (GPIO_PORTC + 28), + }, + { + .name = "visstrim:ld3", + .default_trigger = "nand-disk", + .gpio = (GPIO_PORTC + 25), + }, +}; + +static const struct gpio_led_platform_data visstrim_m10_led_data __initconst = { + .leds = visstrim_m10_leds, + .num_leds = ARRAY_SIZE(visstrim_m10_leds), +}; + /* Visstrim_SM10 has a microSD slot connected to sdhc1 */ static int visstrim_m10_sdhc1_init(struct device *dev, irq_handler_t detect_irq, void *data) @@ -216,6 +342,9 @@ static struct i2c_board_info visstrim_m10_i2c_devices[] = { { I2C_BOARD_INFO("tlv320aic32x4", 0x18), .platform_data = &visstrim_m10_aic32x4_pdata, + }, + { + I2C_BOARD_INFO("m41t00", 0x68), } }; @@ -254,16 +383,21 @@ static void __init visstrim_m10_board_init(void) imx27_add_imx_ssi(0, &visstrim_m10_ssi_pdata); imx27_add_imx_uart0(&uart_pdata); - i2c_register_board_info(0, visstrim_m10_i2c_devices, - ARRAY_SIZE(visstrim_m10_i2c_devices)); imx27_add_imx_i2c(0, &visstrim_m10_i2c_data); imx27_add_imx_i2c(1, &visstrim_m10_i2c_data); + i2c_register_board_info(0, visstrim_m10_i2c_devices, + ARRAY_SIZE(visstrim_m10_i2c_devices)); + imx27_add_mxc_mmc(0, &visstrim_m10_sdhc_pdata); imx27_add_mxc_ehci_otg(&visstrim_m10_usbotg_pdata); imx27_add_fec(NULL); imx_add_gpio_keys(&visstrim_gpio_keys_platform_data); platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); imx_add_platform_device("mx27vis", 0, NULL, 0, NULL, 0); + platform_device_register_resndata(NULL, "soc-camera-pdrv", 0, NULL, 0, + &iclink_tvp5150, sizeof(iclink_tvp5150)); + gpio_led_register_device(0, &visstrim_m10_led_data); + visstrim_camera_init(); } static void __init visstrim_m10_timer_init(void) @@ -277,6 +411,7 @@ static struct sys_timer visstrim_m10_timer = { MACHINE_START(IMX27_VISSTRIM_M10, "Vista Silicon Visstrim_M10") .atag_offset = 0x100, + .reserve = visstrim_reserve, .map_io = mx27_map_io, .init_early = imx27_init_early, .init_irq = mx27_init_irq, diff --git a/arch/arm/mach-imx/mach-mx31moboard.c b/arch/arm/mach-imx/mach-mx31moboard.c index f225262b5c3..c0511fb1a5f 100644 --- a/arch/arm/mach-imx/mach-mx31moboard.c +++ b/arch/arm/mach-imx/mach-mx31moboard.c @@ -530,6 +530,8 @@ static void __init mx31moboard_init(void) platform_add_devices(devices, ARRAY_SIZE(devices)); gpio_led_register_device(-1, &mx31moboard_led_pdata); + imx31_add_imx2_wdt(NULL); + imx31_add_imx_uart0(&uart0_pdata); imx31_add_imx_uart4(&uart4_pdata); @@ -590,7 +592,7 @@ static void __init mx31moboard_reserve(void) } MACHINE_START(MX31MOBOARD, "EPFL Mobots mx31moboard") - /* Maintainer: Valentin Longchamp, EPFL Mobots group */ + /* Maintainer: Philippe Retornaz, EPFL Mobots group */ .atag_offset = 0x100, .reserve = mx31moboard_reserve, .map_io = mx31_map_io, diff --git a/arch/arm/mach-imx/mach-mx35_3ds.c b/arch/arm/mach-imx/mach-mx35_3ds.c index 0af6c9c5b3f..e14291d89e4 100644 --- a/arch/arm/mach-imx/mach-mx35_3ds.c +++ b/arch/arm/mach-imx/mach-mx35_3ds.c @@ -4,6 +4,11 @@ * * Author: Fabio Estevam <fabio.estevam@freescale.com> * + * Copyright (C) 2011 Meprolight, Ltd. + * Alex Gershgorin <alexg@meprolight.com> + * + * Modified from i.MX31 3-Stack Development System + * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or @@ -34,15 +39,102 @@ #include <asm/mach/arch.h> #include <asm/mach/time.h> #include <asm/mach/map.h> +#include <asm/memblock.h> #include <mach/hardware.h> #include <mach/common.h> #include <mach/iomux-mx35.h> #include <mach/irqs.h> #include <mach/3ds_debugboard.h> +#include <video/platform_lcd.h> + +#include <media/soc_camera.h> #include "devices-imx35.h" +#define GPIO_MC9S08DZ60_GPS_ENABLE 0 +#define GPIO_MC9S08DZ60_HDD_ENABLE 4 +#define GPIO_MC9S08DZ60_WIFI_ENABLE 5 +#define GPIO_MC9S08DZ60_LCD_ENABLE 6 +#define GPIO_MC9S08DZ60_SPEAKER_ENABLE 8 + +static const struct fb_videomode fb_modedb[] = { + { + /* 800x480 @ 55 Hz */ + .name = "Ceramate-CLAA070VC01", + .refresh = 55, + .xres = 800, + .yres = 480, + .pixclock = 40000, + .left_margin = 40, + .right_margin = 40, + .upper_margin = 5, + .lower_margin = 5, + .hsync_len = 20, + .vsync_len = 10, + .sync = FB_SYNC_OE_ACT_HIGH, + .vmode = FB_VMODE_NONINTERLACED, + .flag = 0, + }, +}; + +static const struct ipu_platform_data mx3_ipu_data __initconst = { + .irq_base = MXC_IPU_IRQ_START, +}; + +static struct mx3fb_platform_data mx3fb_pdata __initdata = { + .name = "Ceramate-CLAA070VC01", + .mode = fb_modedb, + .num_modes = ARRAY_SIZE(fb_modedb), +}; + +static struct i2c_board_info __initdata i2c_devices_3ds[] = { + { + I2C_BOARD_INFO("mc9s08dz60", 0x69), + }, +}; + +static int lcd_power_gpio = -ENXIO; + +static int mc9s08dz60_gpiochip_match(struct gpio_chip *chip, + void *data) +{ + return !strcmp(chip->label, data); +} + +static void mx35_3ds_lcd_set_power( + struct plat_lcd_data *pd, unsigned int power) +{ + struct gpio_chip *chip; + + if (!gpio_is_valid(lcd_power_gpio)) { + chip = gpiochip_find( + "mc9s08dz60", mc9s08dz60_gpiochip_match); + if (chip) { + lcd_power_gpio = + chip->base + GPIO_MC9S08DZ60_LCD_ENABLE; + if (gpio_request(lcd_power_gpio, "lcd_power") < 0) { + pr_err("error: gpio already requested!\n"); + lcd_power_gpio = -ENXIO; + } + } else { + pr_err("error: didn't find mc9s08dz60 gpio chip\n"); + } + } + + if (gpio_is_valid(lcd_power_gpio)) + gpio_set_value_cansleep(lcd_power_gpio, power); +} + +static struct plat_lcd_data mx35_3ds_lcd_data = { + .set_power = mx35_3ds_lcd_set_power, +}; + +static struct platform_device mx35_3ds_lcd = { + .name = "platform-lcd", + .dev.platform_data = &mx35_3ds_lcd_data, +}; + #define EXPIO_PARENT_INT gpio_to_irq(IMX_GPIO_NR(1, 1)) static const struct imxuart_platform_data uart_pdata __initconst = { @@ -120,6 +212,109 @@ static iomux_v3_cfg_t mx35pdk_pads[] = { /* I2C1 */ MX35_PAD_I2C1_CLK__I2C1_SCL, MX35_PAD_I2C1_DAT__I2C1_SDA, + /* Display */ + MX35_PAD_LD0__IPU_DISPB_DAT_0, + MX35_PAD_LD1__IPU_DISPB_DAT_1, + MX35_PAD_LD2__IPU_DISPB_DAT_2, + MX35_PAD_LD3__IPU_DISPB_DAT_3, + MX35_PAD_LD4__IPU_DISPB_DAT_4, + MX35_PAD_LD5__IPU_DISPB_DAT_5, + MX35_PAD_LD6__IPU_DISPB_DAT_6, + MX35_PAD_LD7__IPU_DISPB_DAT_7, + MX35_PAD_LD8__IPU_DISPB_DAT_8, + MX35_PAD_LD9__IPU_DISPB_DAT_9, + MX35_PAD_LD10__IPU_DISPB_DAT_10, + MX35_PAD_LD11__IPU_DISPB_DAT_11, + MX35_PAD_LD12__IPU_DISPB_DAT_12, + MX35_PAD_LD13__IPU_DISPB_DAT_13, + MX35_PAD_LD14__IPU_DISPB_DAT_14, + MX35_PAD_LD15__IPU_DISPB_DAT_15, + MX35_PAD_LD16__IPU_DISPB_DAT_16, + MX35_PAD_LD17__IPU_DISPB_DAT_17, + MX35_PAD_D3_HSYNC__IPU_DISPB_D3_HSYNC, + MX35_PAD_D3_FPSHIFT__IPU_DISPB_D3_CLK, + MX35_PAD_D3_DRDY__IPU_DISPB_D3_DRDY, + MX35_PAD_CONTRAST__IPU_DISPB_CONTR, + MX35_PAD_D3_VSYNC__IPU_DISPB_D3_VSYNC, + MX35_PAD_D3_REV__IPU_DISPB_D3_REV, + MX35_PAD_D3_CLS__IPU_DISPB_D3_CLS, + /* CSI */ + MX35_PAD_TX1__IPU_CSI_D_6, + MX35_PAD_TX0__IPU_CSI_D_7, + MX35_PAD_CSI_D8__IPU_CSI_D_8, + MX35_PAD_CSI_D9__IPU_CSI_D_9, + MX35_PAD_CSI_D10__IPU_CSI_D_10, + MX35_PAD_CSI_D11__IPU_CSI_D_11, + MX35_PAD_CSI_D12__IPU_CSI_D_12, + MX35_PAD_CSI_D13__IPU_CSI_D_13, + MX35_PAD_CSI_D14__IPU_CSI_D_14, + MX35_PAD_CSI_D15__IPU_CSI_D_15, + MX35_PAD_CSI_HSYNC__IPU_CSI_HSYNC, + MX35_PAD_CSI_MCLK__IPU_CSI_MCLK, + MX35_PAD_CSI_PIXCLK__IPU_CSI_PIXCLK, + MX35_PAD_CSI_VSYNC__IPU_CSI_VSYNC, +}; + +/* + * Camera support +*/ +static phys_addr_t mx3_camera_base __initdata; +#define MX35_3DS_CAMERA_BUF_SIZE SZ_8M + +static const struct mx3_camera_pdata mx35_3ds_camera_pdata __initconst = { + .flags = MX3_CAMERA_DATAWIDTH_8, + .mclk_10khz = 2000, +}; + +static int __init imx35_3ds_init_camera(void) +{ + int dma, ret = -ENOMEM; + struct platform_device *pdev = + imx35_alloc_mx3_camera(&mx35_3ds_camera_pdata); + + if (IS_ERR(pdev)) + return PTR_ERR(pdev); + + if (!mx3_camera_base) + goto err; + + dma = dma_declare_coherent_memory(&pdev->dev, + mx3_camera_base, mx3_camera_base, + MX35_3DS_CAMERA_BUF_SIZE, + DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE); + + if (!(dma & DMA_MEMORY_MAP)) + goto err; + + ret = platform_device_add(pdev); + if (ret) +err: + platform_device_put(pdev); + + return ret; +} + +static const struct ipu_platform_data mx35_3ds_ipu_data __initconst = { + .irq_base = MXC_IPU_IRQ_START, +}; + +static struct i2c_board_info mx35_3ds_i2c_camera = { + I2C_BOARD_INFO("ov2640", 0x30), +}; + +static struct soc_camera_link iclink_ov2640 = { + .bus_id = 0, + .board_info = &mx35_3ds_i2c_camera, + .i2c_adapter_id = 0, + .power = NULL, +}; + +static struct platform_device mx35_3ds_ov2640 = { + .name = "soc-camera-pdrv", + .id = 0, + .dev = { + .platform_data = &iclink_ov2640, + }, }; static int mx35_3ds_otg_init(struct platform_device *pdev) @@ -179,6 +374,8 @@ static const struct imxi2c_platform_data mx35_3ds_i2c0_data __initconst = { */ static void __init mx35_3ds_init(void) { + struct platform_device *imx35_fb_pdev; + imx35_soc_init(); mxc_iomux_v3_setup_multiple_pads(mx35pdk_pads, ARRAY_SIZE(mx35pdk_pads)); @@ -204,6 +401,17 @@ static void __init mx35_3ds_init(void) pr_warn("Init of the debugboard failed, all " "devices on the debugboard are unusable.\n"); imx35_add_imx_i2c0(&mx35_3ds_i2c0_data); + + i2c_register_board_info( + 0, i2c_devices_3ds, ARRAY_SIZE(i2c_devices_3ds)); + + imx35_add_ipu_core(&mx35_3ds_ipu_data); + platform_device_register(&mx35_3ds_ov2640); + imx35_3ds_init_camera(); + + imx35_fb_pdev = imx35_add_mx3_sdc_fb(&mx3fb_pdata); + mx35_3ds_lcd.dev.parent = &imx35_fb_pdev->dev; + platform_device_register(&mx35_3ds_lcd); } static void __init mx35pdk_timer_init(void) @@ -215,6 +423,13 @@ struct sys_timer mx35pdk_timer = { .init = mx35pdk_timer_init, }; +static void __init mx35_3ds_reserve(void) +{ + /* reserve MX35_3DS_CAMERA_BUF_SIZE bytes for mx3-camera */ + mx3_camera_base = arm_memblock_steal(MX35_3DS_CAMERA_BUF_SIZE, + MX35_3DS_CAMERA_BUF_SIZE); +} + MACHINE_START(MX35_3DS, "Freescale MX35PDK") /* Maintainer: Freescale Semiconductor, Inc */ .atag_offset = 0x100, @@ -224,5 +439,6 @@ MACHINE_START(MX35_3DS, "Freescale MX35PDK") .handle_irq = imx35_handle_irq, .timer = &mx35pdk_timer, .init_machine = mx35_3ds_init, + .reserve = mx35_3ds_reserve, .restart = mxc_restart, MACHINE_END diff --git a/arch/arm/mach-imx/mm-imx3.c b/arch/arm/mach-imx/mm-imx3.c index 2530c151b7b..9c9b7f9f43d 100644 --- a/arch/arm/mach-imx/mm-imx3.c +++ b/arch/arm/mach-imx/mm-imx3.c @@ -34,31 +34,29 @@ static void imx3_idle(void) { unsigned long reg = 0; - if (!need_resched()) - __asm__ __volatile__( - /* disable I and D cache */ - "mrc p15, 0, %0, c1, c0, 0\n" - "bic %0, %0, #0x00001000\n" - "bic %0, %0, #0x00000004\n" - "mcr p15, 0, %0, c1, c0, 0\n" - /* invalidate I cache */ - "mov %0, #0\n" - "mcr p15, 0, %0, c7, c5, 0\n" - /* clear and invalidate D cache */ - "mov %0, #0\n" - "mcr p15, 0, %0, c7, c14, 0\n" - /* WFI */ - "mov %0, #0\n" - "mcr p15, 0, %0, c7, c0, 4\n" - "nop\n" "nop\n" "nop\n" "nop\n" - "nop\n" "nop\n" "nop\n" - /* enable I and D cache */ - "mrc p15, 0, %0, c1, c0, 0\n" - "orr %0, %0, #0x00001000\n" - "orr %0, %0, #0x00000004\n" - "mcr p15, 0, %0, c1, c0, 0\n" - : "=r" (reg)); - local_irq_enable(); + __asm__ __volatile__( + /* disable I and D cache */ + "mrc p15, 0, %0, c1, c0, 0\n" + "bic %0, %0, #0x00001000\n" + "bic %0, %0, #0x00000004\n" + "mcr p15, 0, %0, c1, c0, 0\n" + /* invalidate I cache */ + "mov %0, #0\n" + "mcr p15, 0, %0, c7, c5, 0\n" + /* clear and invalidate D cache */ + "mov %0, #0\n" + "mcr p15, 0, %0, c7, c14, 0\n" + /* WFI */ + "mov %0, #0\n" + "mcr p15, 0, %0, c7, c0, 4\n" + "nop\n" "nop\n" "nop\n" "nop\n" + "nop\n" "nop\n" "nop\n" + /* enable I and D cache */ + "mrc p15, 0, %0, c1, c0, 0\n" + "orr %0, %0, #0x00001000\n" + "orr %0, %0, #0x00000004\n" + "mcr p15, 0, %0, c1, c0, 0\n" + : "=r" (reg)); } static void __iomem *imx3_ioremap(unsigned long phys_addr, size_t size, @@ -134,8 +132,8 @@ void __init imx31_init_early(void) { mxc_set_cpu_type(MXC_CPU_MX31); mxc_arch_reset_init(MX31_IO_ADDRESS(MX31_WDOG_BASE_ADDR)); - pm_idle = imx3_idle; imx_ioremap = imx3_ioremap; + arm_pm_idle = imx3_idle; } void __init mx31_init_irq(void) @@ -203,7 +201,7 @@ void __init imx35_init_early(void) mxc_set_cpu_type(MXC_CPU_MX35); mxc_iomux_v3_init(MX35_IO_ADDRESS(MX35_IOMUXC_BASE_ADDR)); mxc_arch_reset_init(MX35_IO_ADDRESS(MX35_WDOG_BASE_ADDR)); - pm_idle = imx3_idle; + arm_pm_idle = imx3_idle; imx_ioremap = imx3_ioremap; } diff --git a/arch/arm/mach-imx/mm-imx5.c b/arch/arm/mach-imx/mm-imx5.c index 90d7880bb37..dc7c4ed8153 100644 --- a/arch/arm/mach-imx/mm-imx5.c +++ b/arch/arm/mach-imx/mm-imx5.c @@ -26,23 +26,17 @@ static struct clk *gpc_dvfs_clk; static void imx5_idle(void) { - if (!need_resched()) { - /* gpc clock is needed for SRPG */ - if (gpc_dvfs_clk == NULL) { - gpc_dvfs_clk = clk_get(NULL, "gpc_dvfs"); - if (IS_ERR(gpc_dvfs_clk)) - goto err0; - } - clk_enable(gpc_dvfs_clk); - mx5_cpu_lp_set(WAIT_UNCLOCKED_POWER_OFF); - if (tzic_enable_wake()) - goto err1; - cpu_do_idle(); -err1: - clk_disable(gpc_dvfs_clk); + /* gpc clock is needed for SRPG */ + if (gpc_dvfs_clk == NULL) { + gpc_dvfs_clk = clk_get(NULL, "gpc_dvfs"); + if (IS_ERR(gpc_dvfs_clk)) + return; } -err0: - local_irq_enable(); + clk_enable(gpc_dvfs_clk); + mx5_cpu_lp_set(WAIT_UNCLOCKED_POWER_OFF); + if (tzic_enable_wake() != 0) + cpu_do_idle(); + clk_disable(gpc_dvfs_clk); } /* @@ -108,7 +102,7 @@ void __init imx51_init_early(void) mxc_set_cpu_type(MXC_CPU_MX51); mxc_iomux_v3_init(MX51_IO_ADDRESS(MX51_IOMUXC_BASE_ADDR)); mxc_arch_reset_init(MX51_IO_ADDRESS(MX51_WDOG1_BASE_ADDR)); - pm_idle = imx5_idle; + arm_pm_idle = imx5_idle; } void __init imx53_init_early(void) diff --git a/arch/arm/mach-imx/pm-imx27.c b/arch/arm/mach-imx/pm-imx27.c index e455d2f855b..6fcffa7db97 100644 --- a/arch/arm/mach-imx/pm-imx27.c +++ b/arch/arm/mach-imx/pm-imx27.c @@ -10,7 +10,6 @@ #include <linux/kernel.h> #include <linux/suspend.h> #include <linux/io.h> -#include <mach/system.h> #include <mach/hardware.h> static int mx27_suspend_enter(suspend_state_t state) @@ -23,7 +22,7 @@ static int mx27_suspend_enter(suspend_state_t state) cscr &= 0xFFFFFFFC; __raw_writel(cscr, MX27_IO_ADDRESS(MX27_CCM_BASE_ADDR)); /* Executes WFI */ - arch_idle(); + cpu_do_idle(); break; default: diff --git a/arch/arm/mach-integrator/core.c b/arch/arm/mach-integrator/core.c index 019f0ab08f6..15b87f26ac9 100644 --- a/arch/arm/mach-integrator/core.c +++ b/arch/arm/mach-integrator/core.c @@ -35,67 +35,23 @@ static struct amba_pl010_data integrator_uart_data; -static struct amba_device rtc_device = { - .dev = { - .init_name = "mb:15", - }, - .res = { - .start = INTEGRATOR_RTC_BASE, - .end = INTEGRATOR_RTC_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - .irq = { IRQ_RTCINT, NO_IRQ }, -}; +#define INTEGRATOR_RTC_IRQ { IRQ_RTCINT } +#define INTEGRATOR_UART0_IRQ { IRQ_UARTINT0 } +#define INTEGRATOR_UART1_IRQ { IRQ_UARTINT1 } +#define KMI0_IRQ { IRQ_KMIINT0 } +#define KMI1_IRQ { IRQ_KMIINT1 } -static struct amba_device uart0_device = { - .dev = { - .init_name = "mb:16", - .platform_data = &integrator_uart_data, - }, - .res = { - .start = INTEGRATOR_UART0_BASE, - .end = INTEGRATOR_UART0_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - .irq = { IRQ_UARTINT0, NO_IRQ }, -}; +static AMBA_APB_DEVICE(rtc, "mb:15", 0, + INTEGRATOR_RTC_BASE, INTEGRATOR_RTC_IRQ, NULL); -static struct amba_device uart1_device = { - .dev = { - .init_name = "mb:17", - .platform_data = &integrator_uart_data, - }, - .res = { - .start = INTEGRATOR_UART1_BASE, - .end = INTEGRATOR_UART1_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - .irq = { IRQ_UARTINT1, NO_IRQ }, -}; +static AMBA_APB_DEVICE(uart0, "mb:16", 0, + INTEGRATOR_UART0_BASE, INTEGRATOR_UART0_IRQ, &integrator_uart_data); -static struct amba_device kmi0_device = { - .dev = { - .init_name = "mb:18", - }, - .res = { - .start = KMI0_BASE, - .end = KMI0_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - .irq = { IRQ_KMIINT0, NO_IRQ }, -}; +static AMBA_APB_DEVICE(uart1, "mb:17", 0, + INTEGRATOR_UART1_BASE, INTEGRATOR_UART1_IRQ, &integrator_uart_data); -static struct amba_device kmi1_device = { - .dev = { - .init_name = "mb:19", - }, - .res = { - .start = KMI1_BASE, - .end = KMI1_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - .irq = { IRQ_KMIINT1, NO_IRQ }, -}; +static AMBA_APB_DEVICE(kmi0, "mb:18", 0, KMI0_BASE, KMI0_IRQ, NULL); +static AMBA_APB_DEVICE(kmi1, "mb:19", 0, KMI1_BASE, KMI1_IRQ, NULL); static struct amba_device *amba_devs[] __initdata = { &rtc_device, diff --git a/arch/arm/mach-integrator/impd1.c b/arch/arm/mach-integrator/impd1.c index 8cbb75a96bd..3e538da6cb1 100644 --- a/arch/arm/mach-integrator/impd1.c +++ b/arch/arm/mach-integrator/impd1.c @@ -401,24 +401,21 @@ static int impd1_probe(struct lm_device *dev) pc_base = dev->resource.start + idev->offset; - d = kzalloc(sizeof(struct amba_device), GFP_KERNEL); + d = amba_device_alloc(NULL, pc_base, SZ_4K); if (!d) continue; dev_set_name(&d->dev, "lm%x:%5.5lx", dev->id, idev->offset >> 12); d->dev.parent = &dev->dev; - d->res.start = dev->resource.start + idev->offset; - d->res.end = d->res.start + SZ_4K - 1; - d->res.flags = IORESOURCE_MEM; d->irq[0] = dev->irq; d->irq[1] = dev->irq; d->periphid = idev->id; d->dev.platform_data = idev->platform_data; - ret = amba_device_register(d, &dev->resource); + ret = amba_device_add(d, &dev->resource); if (ret) { dev_err(&d->dev, "unable to register device: %d\n", ret); - kfree(d); + amba_device_put(d); } } diff --git a/arch/arm/mach-integrator/include/mach/system.h b/arch/arm/mach-integrator/include/mach/system.h deleted file mode 100644 index 901514eba4a..00000000000 --- a/arch/arm/mach-integrator/include/mach/system.h +++ /dev/null @@ -1,33 +0,0 @@ -/* - * arch/arm/mach-integrator/include/mach/system.h - * - * Copyright (C) 1999 ARM Limited - * Copyright (C) 2000 Deep Blue Solutions Ltd - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H - -static inline void arch_idle(void) -{ - /* - * This should do all the clock switching - * and wait for interrupt tricks - */ - cpu_do_idle(); -} - -#endif diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c index a8b6aa6003f..be9ead4a3bc 100644 --- a/arch/arm/mach-integrator/integrator_cp.c +++ b/arch/arm/mach-integrator/integrator_cp.c @@ -347,32 +347,14 @@ static struct mmci_platform_data mmc_data = { .gpio_cd = -1, }; -static struct amba_device mmc_device = { - .dev = { - .init_name = "mb:1c", - .platform_data = &mmc_data, - }, - .res = { - .start = INTEGRATOR_CP_MMC_BASE, - .end = INTEGRATOR_CP_MMC_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - .irq = { IRQ_CP_MMCIINT0, IRQ_CP_MMCIINT1 }, - .periphid = 0, -}; +#define INTEGRATOR_CP_MMC_IRQS { IRQ_CP_MMCIINT0, IRQ_CP_MMCIINT1 } +#define INTEGRATOR_CP_AACI_IRQS { IRQ_CP_AACIINT } -static struct amba_device aaci_device = { - .dev = { - .init_name = "mb:1d", - }, - .res = { - .start = INTEGRATOR_CP_AACI_BASE, - .end = INTEGRATOR_CP_AACI_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - .irq = { IRQ_CP_AACIINT, NO_IRQ }, - .periphid = 0, -}; +static AMBA_APB_DEVICE(mmc, "mb:1c", 0, INTEGRATOR_CP_MMC_BASE, + INTEGRATOR_CP_MMC_IRQS, &mmc_data); + +static AMBA_APB_DEVICE(aaci, "mb:1d", 0, INTEGRATOR_CP_AACI_BASE, + INTEGRATOR_CP_AACI_IRQS, NULL); /* @@ -425,21 +407,8 @@ static struct clcd_board clcd_data = { .remove = versatile_clcd_remove_dma, }; -static struct amba_device clcd_device = { - .dev = { - .init_name = "mb:c0", - .coherent_dma_mask = ~0, - .platform_data = &clcd_data, - }, - .res = { - .start = INTCP_PA_CLCD_BASE, - .end = INTCP_PA_CLCD_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - .dma_mask = ~0, - .irq = { IRQ_CP_CLCDCINT, NO_IRQ }, - .periphid = 0, -}; +static AMBA_AHB_DEVICE(clcd, "mb:c0", 0, INTCP_PA_CLCD_BASE, + { IRQ_CP_CLCDCINT }, &clcd_data); static struct amba_device *amba_devs[] __initdata = { &mmc_device, diff --git a/arch/arm/mach-iop13xx/include/mach/system.h b/arch/arm/mach-iop13xx/include/mach/system.h deleted file mode 100644 index 1f31ed3f8ae..00000000000 --- a/arch/arm/mach-iop13xx/include/mach/system.h +++ /dev/null @@ -1,13 +0,0 @@ -/* - * arch/arm/mach-iop13xx/include/mach/system.h - * - * Copyright (C) 2004 Intel Corp. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -static inline void arch_idle(void) -{ - cpu_do_idle(); -} diff --git a/arch/arm/mach-iop32x/include/mach/system.h b/arch/arm/mach-iop32x/include/mach/system.h deleted file mode 100644 index 4a88727bca9..00000000000 --- a/arch/arm/mach-iop32x/include/mach/system.h +++ /dev/null @@ -1,13 +0,0 @@ -/* - * arch/arm/mach-iop32x/include/mach/system.h - * - * Copyright (C) 2001 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -static inline void arch_idle(void) -{ - cpu_do_idle(); -} diff --git a/arch/arm/mach-iop33x/include/mach/system.h b/arch/arm/mach-iop33x/include/mach/system.h deleted file mode 100644 index 4f98e765397..00000000000 --- a/arch/arm/mach-iop33x/include/mach/system.h +++ /dev/null @@ -1,13 +0,0 @@ -/* - * arch/arm/mach-iop33x/include/mach/system.h - * - * Copyright (C) 2001 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -static inline void arch_idle(void) -{ - cpu_do_idle(); -} diff --git a/arch/arm/mach-ixp2000/include/mach/system.h b/arch/arm/mach-ixp2000/include/mach/system.h deleted file mode 100644 index a7fb08b2b8e..00000000000 --- a/arch/arm/mach-ixp2000/include/mach/system.h +++ /dev/null @@ -1,14 +0,0 @@ -/* - * arch/arm/mach-ixp2000/include/mach/system.h - * - * Copyright (C) 2002 Intel Corp. - * Copyricht (C) 2003-2005 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -static inline void arch_idle(void) -{ - cpu_do_idle(); -} diff --git a/arch/arm/mach-ixp23xx/core.c b/arch/arm/mach-ixp23xx/core.c index 0923bb905cc..7c1495e4fe7 100644 --- a/arch/arm/mach-ixp23xx/core.c +++ b/arch/arm/mach-ixp23xx/core.c @@ -441,6 +441,9 @@ static struct platform_device *ixp23xx_devices[] __initdata = { void __init ixp23xx_sys_init(void) { + /* by default, the idle code is disabled */ + disable_hlt(); + *IXP23XX_EXP_UNIT_FUSE |= 0xf; platform_add_devices(ixp23xx_devices, ARRAY_SIZE(ixp23xx_devices)); } diff --git a/arch/arm/mach-ixp23xx/include/mach/system.h b/arch/arm/mach-ixp23xx/include/mach/system.h deleted file mode 100644 index 277dda7334b..00000000000 --- a/arch/arm/mach-ixp23xx/include/mach/system.h +++ /dev/null @@ -1,16 +0,0 @@ -/* - * arch/arm/mach-ixp23xx/include/mach/system.h - * - * Copyright (C) 2003 Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -static inline void arch_idle(void) -{ -#if 0 - if (!hlt_counter) - cpu_do_idle(); -#endif -} diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c index 3841ab4146b..a6329a0a8ec 100644 --- a/arch/arm/mach-ixp4xx/common.c +++ b/arch/arm/mach-ixp4xx/common.c @@ -236,6 +236,12 @@ void __init ixp4xx_init_irq(void) { int i = 0; + /* + * ixp4xx does not implement the XScale PWRMODE register + * so it must not call cpu_do_idle(). + */ + disable_hlt(); + /* Route all sources to IRQ instead of FIQ */ *IXP4XX_ICLR = 0x0; diff --git a/arch/arm/mach-ixp4xx/include/mach/system.h b/arch/arm/mach-ixp4xx/include/mach/system.h deleted file mode 100644 index 140a9bef446..00000000000 --- a/arch/arm/mach-ixp4xx/include/mach/system.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * arch/arm/mach-ixp4xx/include/mach/system.h - * - * Copyright (C) 2002 Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ -static inline void arch_idle(void) -{ - /* ixp4xx does not implement the XScale PWRMODE register, - * so it must not call cpu_do_idle() here. - */ -#if 0 - cpu_do_idle(); -#endif -} diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig index 7fc603b4689..90ceab76192 100644 --- a/arch/arm/mach-kirkwood/Kconfig +++ b/arch/arm/mach-kirkwood/Kconfig @@ -44,6 +44,20 @@ config MACH_GURUPLUG Say 'Y' here if you want your kernel to support the Marvell GuruPlug Reference Board. +config ARCH_KIRKWOOD_DT + bool "Marvell Kirkwood Flattened Device Tree" + select USE_OF + help + Say 'Y' here if you want your kernel to support the + Marvell Kirkwood using flattened device tree. + +config MACH_DREAMPLUG_DT + bool "Marvell DreamPlug (Flattened Device Tree)" + select ARCH_KIRKWOOD_DT + help + Say 'Y' here if you want your kernel to support the + Marvell DreamPlug (Flattened Device Tree). + config MACH_TS219 bool "QNAP TS-110, TS-119, TS-119P+, TS-210, TS-219, TS-219P and TS-219P+ Turbo NAS" help diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile index 5dcaa81a2ec..acbc5e1db06 100644 --- a/arch/arm/mach-kirkwood/Makefile +++ b/arch/arm/mach-kirkwood/Makefile @@ -20,3 +20,4 @@ obj-$(CONFIG_MACH_NET5BIG_V2) += netxbig_v2-setup.o lacie_v2-common.o obj-$(CONFIG_MACH_T5325) += t5325-setup.o obj-$(CONFIG_CPU_IDLE) += cpuidle.o +obj-$(CONFIG_ARCH_KIRKWOOD_DT) += board-dt.o diff --git a/arch/arm/mach-kirkwood/Makefile.boot b/arch/arm/mach-kirkwood/Makefile.boot index 760a0efe758..16f93852230 100644 --- a/arch/arm/mach-kirkwood/Makefile.boot +++ b/arch/arm/mach-kirkwood/Makefile.boot @@ -1,3 +1,5 @@ zreladdr-y += 0x00008000 params_phys-y := 0x00000100 initrd_phys-y := 0x00800000 + +dtb-$(CONFIG_MACH_DREAMPLUG_DT) += kirkwood-dreamplug.dtb diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c new file mode 100644 index 00000000000..fbe6405602e --- /dev/null +++ b/arch/arm/mach-kirkwood/board-dt.c @@ -0,0 +1,180 @@ +/* + * Copyright 2012 (C), Jason Cooper <jason@lakedaemon.net> + * + * arch/arm/mach-kirkwood/board-dt.c + * + * Marvell DreamPlug Reference Board Setup + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/mtd/partitions.h> +#include <linux/ata_platform.h> +#include <linux/mv643xx_eth.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_fdt.h> +#include <linux/of_irq.h> +#include <linux/of_platform.h> +#include <linux/gpio.h> +#include <linux/leds.h> +#include <linux/mtd/physmap.h> +#include <linux/spi/flash.h> +#include <linux/spi/spi.h> +#include <linux/spi/orion_spi.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <mach/kirkwood.h> +#include <plat/mvsdio.h> +#include "common.h" +#include "mpp.h" + +static struct of_device_id kirkwood_dt_match_table[] __initdata = { + { .compatible = "simple-bus", }, + { } +}; + +struct mtd_partition dreamplug_partitions[] = { + { + .name = "u-boot", + .size = SZ_512K, + .offset = 0, + }, + { + .name = "u-boot env", + .size = SZ_64K, + .offset = SZ_512K + SZ_512K, + }, + { + .name = "dtb", + .size = SZ_64K, + .offset = SZ_512K + SZ_512K + SZ_512K, + }, +}; + +static const struct flash_platform_data dreamplug_spi_slave_data = { + .type = "mx25l1606e", + .name = "spi_flash", + .parts = dreamplug_partitions, + .nr_parts = ARRAY_SIZE(dreamplug_partitions), +}; + +static struct spi_board_info __initdata dreamplug_spi_slave_info[] = { + { + .modalias = "m25p80", + .platform_data = &dreamplug_spi_slave_data, + .irq = -1, + .max_speed_hz = 50000000, + .bus_num = 0, + .chip_select = 0, + }, +}; + +static struct mv643xx_eth_platform_data dreamplug_ge00_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(0), +}; + +static struct mv643xx_eth_platform_data dreamplug_ge01_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(1), +}; + +static struct mv_sata_platform_data dreamplug_sata_data = { + .n_ports = 1, +}; + +static struct mvsdio_platform_data dreamplug_mvsdio_data = { + /* unfortunately the CD signal has not been connected */ +}; + +static struct gpio_led dreamplug_led_pins[] = { + { + .name = "dreamplug:blue:bluetooth", + .gpio = 47, + .active_low = 1, + }, + { + .name = "dreamplug:green:wifi", + .gpio = 48, + .active_low = 1, + }, + { + .name = "dreamplug:green:wifi_ap", + .gpio = 49, + .active_low = 1, + }, +}; + +static struct gpio_led_platform_data dreamplug_led_data = { + .leds = dreamplug_led_pins, + .num_leds = ARRAY_SIZE(dreamplug_led_pins), +}; + +static struct platform_device dreamplug_leds = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &dreamplug_led_data, + } +}; + +static unsigned int dreamplug_mpp_config[] __initdata = { + MPP0_SPI_SCn, + MPP1_SPI_MOSI, + MPP2_SPI_SCK, + MPP3_SPI_MISO, + MPP47_GPIO, /* Bluetooth LED */ + MPP48_GPIO, /* Wifi LED */ + MPP49_GPIO, /* Wifi AP LED */ + 0 +}; + +static void __init dreamplug_init(void) +{ + /* + * Basic setup. Needs to be called early. + */ + kirkwood_mpp_conf(dreamplug_mpp_config); + + spi_register_board_info(dreamplug_spi_slave_info, + ARRAY_SIZE(dreamplug_spi_slave_info)); + kirkwood_spi_init(); + + kirkwood_ehci_init(); + kirkwood_ge00_init(&dreamplug_ge00_data); + kirkwood_ge01_init(&dreamplug_ge01_data); + kirkwood_sata_init(&dreamplug_sata_data); + kirkwood_sdio_init(&dreamplug_mvsdio_data); + + platform_device_register(&dreamplug_leds); +} + +static void __init kirkwood_dt_init(void) +{ + kirkwood_init(); + + if (of_machine_is_compatible("globalscale,dreamplug")) + dreamplug_init(); + + of_platform_populate(NULL, kirkwood_dt_match_table, NULL, NULL); +} + +static const char *kirkwood_dt_board_compat[] = { + "globalscale,dreamplug", + NULL +}; + +DT_MACHINE_START(KIRKWOOD_DT, "Marvell Kirkwood (Flattened Device Tree)") + /* Maintainer: Jason Cooper <jason@lakedaemon.net> */ + .map_io = kirkwood_map_io, + .init_early = kirkwood_init_early, + .init_irq = kirkwood_init_irq, + .timer = &kirkwood_timer, + .init_machine = kirkwood_dt_init, + .restart = kirkwood_restart, + .dt_compat = kirkwood_dt_board_compat, +MACHINE_END diff --git a/arch/arm/mach-kirkwood/include/mach/system.h b/arch/arm/mach-kirkwood/include/mach/system.h deleted file mode 100644 index 5fddde002b5..00000000000 --- a/arch/arm/mach-kirkwood/include/mach/system.h +++ /dev/null @@ -1,17 +0,0 @@ -/* - * arch/arm/mach-kirkwood/include/mach/system.h - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H - -static inline void arch_idle(void) -{ - cpu_do_idle(); -} - -#endif diff --git a/arch/arm/mach-ks8695/include/mach/system.h b/arch/arm/mach-ks8695/include/mach/system.h deleted file mode 100644 index 59fe992395b..00000000000 --- a/arch/arm/mach-ks8695/include/mach/system.h +++ /dev/null @@ -1,27 +0,0 @@ -/* - * arch/arm/mach-s3c2410/include/mach/system.h - * - * Copyright (C) 2006 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * KS8695 - System function defines and includes - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H - -static void arch_idle(void) -{ - /* - * This should do all the clock switching - * and wait for interrupt tricks, - */ - cpu_do_idle(); - -} - -#endif diff --git a/arch/arm/mach-lpc32xx/include/mach/irqs.h b/arch/arm/mach-lpc32xx/include/mach/irqs.h index 2667f52e3b0..9e3b90df32e 100644 --- a/arch/arm/mach-lpc32xx/include/mach/irqs.h +++ b/arch/arm/mach-lpc32xx/include/mach/irqs.h @@ -61,7 +61,7 @@ */ #define IRQ_LPC32XX_JTAG_COMM_TX LPC32XX_SIC1_IRQ(1) #define IRQ_LPC32XX_JTAG_COMM_RX LPC32XX_SIC1_IRQ(2) -#define IRQ_LPC32XX_GPI_11 LPC32XX_SIC1_IRQ(4) +#define IRQ_LPC32XX_GPI_28 LPC32XX_SIC1_IRQ(4) #define IRQ_LPC32XX_TS_P LPC32XX_SIC1_IRQ(6) #define IRQ_LPC32XX_TS_IRQ LPC32XX_SIC1_IRQ(7) #define IRQ_LPC32XX_TS_AUX LPC32XX_SIC1_IRQ(8) diff --git a/arch/arm/mach-lpc32xx/include/mach/system.h b/arch/arm/mach-lpc32xx/include/mach/system.h deleted file mode 100644 index bf176c99152..00000000000 --- a/arch/arm/mach-lpc32xx/include/mach/system.h +++ /dev/null @@ -1,27 +0,0 @@ -/* - * arch/arm/mach-lpc32xx/include/mach/system.h - * - * Author: Kevin Wells <kevin.wells@nxp.com> - * - * Copyright (C) 2010 NXP Semiconductors - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H - -static void arch_idle(void) -{ - cpu_do_idle(); -} - -#endif diff --git a/arch/arm/mach-lpc32xx/irq.c b/arch/arm/mach-lpc32xx/irq.c index 4eae566dfdc..c74de01ab5b 100644 --- a/arch/arm/mach-lpc32xx/irq.c +++ b/arch/arm/mach-lpc32xx/irq.c @@ -118,6 +118,10 @@ static const struct lpc32xx_event_info lpc32xx_events[NR_IRQS] = { .event_group = &lpc32xx_event_pin_regs, .mask = LPC32XX_CLKPWR_EXTSRC_GPI_06_BIT, }, + [IRQ_LPC32XX_GPI_28] = { + .event_group = &lpc32xx_event_pin_regs, + .mask = LPC32XX_CLKPWR_EXTSRC_GPI_28_BIT, + }, [IRQ_LPC32XX_GPIO_00] = { .event_group = &lpc32xx_event_int_regs, .mask = LPC32XX_CLKPWR_INTSRC_GPIO_00_BIT, @@ -305,9 +309,18 @@ static int lpc32xx_irq_wake(struct irq_data *d, unsigned int state) if (state) eventreg |= lpc32xx_events[d->irq].mask; - else + else { eventreg &= ~lpc32xx_events[d->irq].mask; + /* + * When disabling the wakeup, clear the latched + * event + */ + __raw_writel(lpc32xx_events[d->irq].mask, + lpc32xx_events[d->irq]. + event_group->rawstat_reg); + } + __raw_writel(eventreg, lpc32xx_events[d->irq].event_group->enab_reg); @@ -380,13 +393,15 @@ void __init lpc32xx_init_irq(void) /* Setup SIC1 */ __raw_writel(0, LPC32XX_INTC_MASK(LPC32XX_SIC1_BASE)); - __raw_writel(MIC_APR_DEFAULT, LPC32XX_INTC_POLAR(LPC32XX_SIC1_BASE)); - __raw_writel(MIC_ATR_DEFAULT, LPC32XX_INTC_ACT_TYPE(LPC32XX_SIC1_BASE)); + __raw_writel(SIC1_APR_DEFAULT, LPC32XX_INTC_POLAR(LPC32XX_SIC1_BASE)); + __raw_writel(SIC1_ATR_DEFAULT, + LPC32XX_INTC_ACT_TYPE(LPC32XX_SIC1_BASE)); /* Setup SIC2 */ __raw_writel(0, LPC32XX_INTC_MASK(LPC32XX_SIC2_BASE)); - __raw_writel(MIC_APR_DEFAULT, LPC32XX_INTC_POLAR(LPC32XX_SIC2_BASE)); - __raw_writel(MIC_ATR_DEFAULT, LPC32XX_INTC_ACT_TYPE(LPC32XX_SIC2_BASE)); + __raw_writel(SIC2_APR_DEFAULT, LPC32XX_INTC_POLAR(LPC32XX_SIC2_BASE)); + __raw_writel(SIC2_ATR_DEFAULT, + LPC32XX_INTC_ACT_TYPE(LPC32XX_SIC2_BASE)); /* Configure supported IRQ's */ for (i = 0; i < NR_IRQS; i++) { diff --git a/arch/arm/mach-lpc32xx/phy3250.c b/arch/arm/mach-lpc32xx/phy3250.c index bfee5b45510..5d51c102c25 100644 --- a/arch/arm/mach-lpc32xx/phy3250.c +++ b/arch/arm/mach-lpc32xx/phy3250.c @@ -149,20 +149,8 @@ static struct clcd_board lpc32xx_clcd_data = { .remove = lpc32xx_clcd_remove, }; -static struct amba_device lpc32xx_clcd_device = { - .dev = { - .coherent_dma_mask = ~0, - .init_name = "dev:clcd", - .platform_data = &lpc32xx_clcd_data, - }, - .res = { - .start = LPC32XX_LCD_BASE, - .end = (LPC32XX_LCD_BASE + SZ_4K - 1), - .flags = IORESOURCE_MEM, - }, - .dma_mask = ~0, - .irq = {IRQ_LPC32XX_LCD, NO_IRQ}, -}; +static AMBA_AHB_DEVICE(lpc32xx_clcd, "dev:clcd", 0, + LPC32XX_LCD_BASE, { IRQ_LPC32XX_LCD }, &lpc32xx_clcd_data); /* * AMBA SSP (SPI) @@ -191,20 +179,8 @@ static struct pl022_ssp_controller lpc32xx_ssp0_data = { .enable_dma = 0, }; -static struct amba_device lpc32xx_ssp0_device = { - .dev = { - .coherent_dma_mask = ~0, - .init_name = "dev:ssp0", - .platform_data = &lpc32xx_ssp0_data, - }, - .res = { - .start = LPC32XX_SSP0_BASE, - .end = (LPC32XX_SSP0_BASE + SZ_4K - 1), - .flags = IORESOURCE_MEM, - }, - .dma_mask = ~0, - .irq = {IRQ_LPC32XX_SSP0, NO_IRQ}, -}; +static AMBA_APB_DEVICE(lpc32xx_ssp0, "dev:ssp0", 0, + LPC32XX_SSP0_BASE, { IRQ_LPC32XX_SSP0 }, &lpc32xx_ssp0_data); /* AT25 driver registration */ static int __init phy3250_spi_board_register(void) diff --git a/arch/arm/mach-lpc32xx/serial.c b/arch/arm/mach-lpc32xx/serial.c index 429cfdbb2b3..f2735281616 100644 --- a/arch/arm/mach-lpc32xx/serial.c +++ b/arch/arm/mach-lpc32xx/serial.c @@ -88,6 +88,7 @@ struct uartinit { char *uart_ck_name; u32 ck_mode_mask; void __iomem *pdiv_clk_reg; + resource_size_t mapbase; }; static struct uartinit uartinit_data[] __initdata = { @@ -97,6 +98,7 @@ static struct uartinit uartinit_data[] __initdata = { .ck_mode_mask = LPC32XX_UART_CLKMODE_LOAD(LPC32XX_UART_CLKMODE_ON, 5), .pdiv_clk_reg = LPC32XX_CLKPWR_UART5_CLK_CTRL, + .mapbase = LPC32XX_UART5_BASE, }, #endif #ifdef CONFIG_ARCH_LPC32XX_UART3_SELECT @@ -105,6 +107,7 @@ static struct uartinit uartinit_data[] __initdata = { .ck_mode_mask = LPC32XX_UART_CLKMODE_LOAD(LPC32XX_UART_CLKMODE_ON, 3), .pdiv_clk_reg = LPC32XX_CLKPWR_UART3_CLK_CTRL, + .mapbase = LPC32XX_UART3_BASE, }, #endif #ifdef CONFIG_ARCH_LPC32XX_UART4_SELECT @@ -113,6 +116,7 @@ static struct uartinit uartinit_data[] __initdata = { .ck_mode_mask = LPC32XX_UART_CLKMODE_LOAD(LPC32XX_UART_CLKMODE_ON, 4), .pdiv_clk_reg = LPC32XX_CLKPWR_UART4_CLK_CTRL, + .mapbase = LPC32XX_UART4_BASE, }, #endif #ifdef CONFIG_ARCH_LPC32XX_UART6_SELECT @@ -121,6 +125,7 @@ static struct uartinit uartinit_data[] __initdata = { .ck_mode_mask = LPC32XX_UART_CLKMODE_LOAD(LPC32XX_UART_CLKMODE_ON, 6), .pdiv_clk_reg = LPC32XX_CLKPWR_UART6_CLK_CTRL, + .mapbase = LPC32XX_UART6_BASE, }, #endif }; @@ -165,11 +170,24 @@ void __init lpc32xx_serial_init(void) /* pre-UART clock divider set to 1 */ __raw_writel(0x0101, uartinit_data[i].pdiv_clk_reg); + + /* + * Force a flush of the RX FIFOs to work around a + * HW bug + */ + puart = uartinit_data[i].mapbase; + __raw_writel(0xC1, LPC32XX_UART_IIR_FCR(puart)); + __raw_writel(0x00, LPC32XX_UART_DLL_FIFO(puart)); + j = LPC32XX_SUART_FIFO_SIZE; + while (j--) + tmp = __raw_readl( + LPC32XX_UART_DLL_FIFO(puart)); + __raw_writel(0, LPC32XX_UART_IIR_FCR(puart)); } /* This needs to be done after all UART clocks are setup */ __raw_writel(clkmodes, LPC32XX_UARTCTL_CLKMODE); - for (i = 0; i < ARRAY_SIZE(uartinit_data) - 1; i++) { + for (i = 0; i < ARRAY_SIZE(uartinit_data); i++) { /* Force a flush of the RX FIFOs to work around a HW bug */ puart = serial_std_platform_data[i].mapbase; __raw_writel(0xC1, LPC32XX_UART_IIR_FCR(puart)); diff --git a/arch/arm/mach-mmp/aspenite.c b/arch/arm/mach-mmp/aspenite.c index 17cb7606012..3588a558415 100644 --- a/arch/arm/mach-mmp/aspenite.c +++ b/arch/arm/mach-mmp/aspenite.c @@ -17,7 +17,6 @@ #include <linux/mtd/partitions.h> #include <linux/mtd/nand.h> #include <linux/interrupt.h> -#include <linux/gpio.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> diff --git a/arch/arm/mach-mmp/include/mach/system.h b/arch/arm/mach-mmp/include/mach/system.h deleted file mode 100644 index 1d001eab81e..00000000000 --- a/arch/arm/mach-mmp/include/mach/system.h +++ /dev/null @@ -1,16 +0,0 @@ -/* - * linux/arch/arm/mach-mmp/include/mach/system.h - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_MACH_SYSTEM_H -#define __ASM_MACH_SYSTEM_H - -static inline void arch_idle(void) -{ - cpu_do_idle(); -} -#endif /* __ASM_MACH_SYSTEM_H */ diff --git a/arch/arm/mach-mmp/mmp2.c b/arch/arm/mach-mmp/mmp2.c index 617c60a170a..c709a24a9d2 100644 --- a/arch/arm/mach-mmp/mmp2.c +++ b/arch/arm/mach-mmp/mmp2.c @@ -223,6 +223,7 @@ struct resource mmp2_resource_gpio[] = { }, { .start = IRQ_MMP2_GPIO, .end = IRQ_MMP2_GPIO, + .name = "gpio_mux", .flags = IORESOURCE_IRQ, }, }; diff --git a/arch/arm/mach-mmp/pxa168.c b/arch/arm/mach-mmp/pxa168.c index 7bc17eaa12e..f10f87d8b66 100644 --- a/arch/arm/mach-mmp/pxa168.c +++ b/arch/arm/mach-mmp/pxa168.c @@ -24,7 +24,6 @@ #include <mach/dma.h> #include <mach/devices.h> #include <mach/mfp.h> -#include <linux/platform_device.h> #include <linux/dma-mapping.h> #include <mach/pxa168.h> @@ -167,6 +166,7 @@ struct resource pxa168_resource_gpio[] = { }, { .start = IRQ_PXA168_GPIOX, .end = IRQ_PXA168_GPIOX, + .name = "gpio_mux", .flags = IORESOURCE_IRQ, }, }; diff --git a/arch/arm/mach-mmp/pxa910.c b/arch/arm/mach-mmp/pxa910.c index 3241a25784d..0c87e69adf9 100644 --- a/arch/arm/mach-mmp/pxa910.c +++ b/arch/arm/mach-mmp/pxa910.c @@ -173,6 +173,7 @@ struct resource pxa910_resource_gpio[] = { }, { .start = IRQ_PXA910_AP_GPIO, .end = IRQ_PXA910_AP_GPIO, + .name = "gpio_mux", .flags = IORESOURCE_IRQ, }, }; diff --git a/arch/arm/mach-mmp/tavorevb.c b/arch/arm/mach-mmp/tavorevb.c index 8e3b5af04a5..bc97170125b 100644 --- a/arch/arm/mach-mmp/tavorevb.c +++ b/arch/arm/mach-mmp/tavorevb.c @@ -12,7 +12,6 @@ #include <linux/kernel.h> #include <linux/platform_device.h> #include <linux/smc91x.h> -#include <linux/gpio.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> diff --git a/arch/arm/mach-msm/idle.S b/arch/arm/mach-msm/idle.S deleted file mode 100644 index 6a94f052713..00000000000 --- a/arch/arm/mach-msm/idle.S +++ /dev/null @@ -1,36 +0,0 @@ -/* arch/arm/mach-msm/include/mach/idle.S - * - * Idle processing for MSM7K - work around bugs with SWFI. - * - * Copyright (c) 2007 QUALCOMM Incorporated. - * Copyright (C) 2007 Google, Inc. - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#include <linux/linkage.h> -#include <asm/assembler.h> - -ENTRY(arch_idle) -#ifdef CONFIG_MSM7X00A_IDLE - mrc p15, 0, r1, c1, c0, 0 /* read current CR */ - bic r0, r1, #(1 << 2) /* clear dcache bit */ - bic r0, r0, #(1 << 12) /* clear icache bit */ - mcr p15, 0, r0, c1, c0, 0 /* disable d/i cache */ - - mov r0, #0 /* prepare wfi value */ - mcr p15, 0, r0, c7, c10, 0 /* flush the cache */ - mcr p15, 0, r0, c7, c10, 4 /* memory barrier */ - mcr p15, 0, r0, c7, c0, 4 /* wait for interrupt */ - - mcr p15, 0, r1, c1, c0, 0 /* restore d/i cache */ -#endif - mov pc, lr diff --git a/arch/arm/mach-msm/idle.c b/arch/arm/mach-msm/idle.c new file mode 100644 index 00000000000..0c9e13c6574 --- /dev/null +++ b/arch/arm/mach-msm/idle.c @@ -0,0 +1,49 @@ +/* arch/arm/mach-msm/idle.c + * + * Idle processing for MSM7K - work around bugs with SWFI. + * + * Copyright (c) 2007 QUALCOMM Incorporated. + * Copyright (C) 2007 Google, Inc. + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <linux/init.h> +#include <asm/system.h> + +static void msm_idle(void) +{ +#ifdef CONFIG_MSM7X00A_IDLE + asm volatile ( + + "mrc p15, 0, r1, c1, c0, 0 /* read current CR */ \n\t" + "bic r0, r1, #(1 << 2) /* clear dcache bit */ \n\t" + "bic r0, r0, #(1 << 12) /* clear icache bit */ \n\t" + "mcr p15, 0, r0, c1, c0, 0 /* disable d/i cache */ \n\t" + + "mov r0, #0 /* prepare wfi value */ \n\t" + "mcr p15, 0, r0, c7, c10, 0 /* flush the cache */ \n\t" + "mcr p15, 0, r0, c7, c10, 4 /* memory barrier */ \n\t" + "mcr p15, 0, r0, c7, c0, 4 /* wait for interrupt */ \n\t" + + "mcr p15, 0, r1, c1, c0, 0 /* restore d/i cache */ \n\t" + + : : : "r0","r1" ); +#endif +} + +static int __init msm_idle_init(void) +{ + arm_pm_idle = msm_idle; + return 0; +} + +arch_initcall(msm_idle_init); diff --git a/arch/arm/mach-msm/include/mach/system.h b/arch/arm/mach-msm/include/mach/system.h index 311db2b35da..f5fb2ec87ff 100644 --- a/arch/arm/mach-msm/include/mach/system.h +++ b/arch/arm/mach-msm/include/mach/system.h @@ -12,7 +12,6 @@ * GNU General Public License for more details. * */ -void arch_idle(void); /* low level hardware reset hook -- for example, hitting the * PSHOLD line on the PMIC to hard reset the system diff --git a/arch/arm/mach-mv78xx0/include/mach/system.h b/arch/arm/mach-mv78xx0/include/mach/system.h deleted file mode 100644 index 8c3a5387cec..00000000000 --- a/arch/arm/mach-mv78xx0/include/mach/system.h +++ /dev/null @@ -1,17 +0,0 @@ -/* - * arch/arm/mach-mv78xx0/include/mach/system.h - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H - -static inline void arch_idle(void) -{ - cpu_do_idle(); -} - -#endif diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig index cf00b3e3be8..c57f9964a71 100644 --- a/arch/arm/mach-mxs/Kconfig +++ b/arch/arm/mach-mxs/Kconfig @@ -83,6 +83,18 @@ config MODULE_M28 select MXS_HAVE_PLATFORM_MXSFB select MXS_OCOTP +config MODULE_APX4 + bool + select SOC_IMX28 + select LEDS_GPIO_REGISTER + select MXS_HAVE_AMBA_DUART + select MXS_HAVE_PLATFORM_AUART + select MXS_HAVE_PLATFORM_FEC + select MXS_HAVE_PLATFORM_MXS_I2C + select MXS_HAVE_PLATFORM_MXS_MMC + select MXS_HAVE_PLATFORM_MXS_SAIF + select MXS_OCOTP + config MACH_TX28 bool "Ka-Ro TX28 module" select MODULE_TX28 @@ -91,4 +103,8 @@ config MACH_M28EVK bool "Support DENX M28EVK Platform" select MODULE_M28 +config MACH_APX4DEVKIT + bool "Support Bluegiga APX4 Development Kit" + select MODULE_APX4 + endif diff --git a/arch/arm/mach-mxs/Makefile b/arch/arm/mach-mxs/Makefile index 8c93b24896b..908bf9a567f 100644 --- a/arch/arm/mach-mxs/Makefile +++ b/arch/arm/mach-mxs/Makefile @@ -11,6 +11,7 @@ obj-$(CONFIG_MACH_STMP378X_DEVB) += mach-stmp378x_devb.o obj-$(CONFIG_MACH_MX23EVK) += mach-mx23evk.o obj-$(CONFIG_MACH_MX28EVK) += mach-mx28evk.o obj-$(CONFIG_MACH_M28EVK) += mach-m28evk.o +obj-$(CONFIG_MACH_APX4DEVKIT) += mach-apx4devkit.o obj-$(CONFIG_MODULE_TX28) += module-tx28.o obj-$(CONFIG_MACH_TX28) += mach-tx28.o diff --git a/arch/arm/mach-mxs/devices.c b/arch/arm/mach-mxs/devices.c index fe3e847930c..01faffec306 100644 --- a/arch/arm/mach-mxs/devices.c +++ b/arch/arm/mach-mxs/devices.c @@ -77,16 +77,18 @@ err: int __init mxs_add_amba_device(const struct amba_device *dev) { - struct amba_device *adev = kmalloc(sizeof(*adev), GFP_KERNEL); + struct amba_device *adev = amba_device_alloc(dev->dev.init_name, + dev->res.start, resource_size(&dev->res)); if (!adev) { pr_err("%s: failed to allocate memory", __func__); return -ENOMEM; } - *adev = *dev; + adev->irq[0] = dev->irq[0]; + adev->irq[1] = dev->irq[1]; - return amba_device_register(adev, &iomem_resource); + return amba_device_add(adev, &iomem_resource); } struct device mxs_apbh_bus = { diff --git a/arch/arm/mach-mxs/devices/amba-duart.c b/arch/arm/mach-mxs/devices/amba-duart.c index a559db09b49..a5479f76604 100644 --- a/arch/arm/mach-mxs/devices/amba-duart.c +++ b/arch/arm/mach-mxs/devices/amba-duart.c @@ -23,7 +23,7 @@ const struct amba_device name##_device __initconst = { \ .end = (soc ## _DUART_BASE_ADDR) + SZ_8K - 1, \ .flags = IORESOURCE_MEM, \ }, \ - .irq = {soc ## _INT_DUART, NO_IRQ}, \ + .irq = {soc ## _INT_DUART}, \ } #ifdef CONFIG_SOC_IMX23 diff --git a/arch/arm/mach-mxs/include/mach/digctl.h b/arch/arm/mach-mxs/include/mach/digctl.h index 49a888c65d6..17964066303 100644 --- a/arch/arm/mach-mxs/include/mach/digctl.h +++ b/arch/arm/mach-mxs/include/mach/digctl.h @@ -18,4 +18,5 @@ #define HW_DIGCTL_CTRL 0x0 #define BP_DIGCTL_CTRL_SAIF_CLKMUX 10 #define BM_DIGCTL_CTRL_SAIF_CLKMUX (0x3 << 10) +#define HW_DIGCTL_CHIPID 0x310 #endif diff --git a/arch/arm/mach-mxs/include/mach/mxs.h b/arch/arm/mach-mxs/include/mach/mxs.h index bde5f663474..7d4fb6d0afd 100644 --- a/arch/arm/mach-mxs/include/mach/mxs.h +++ b/arch/arm/mach-mxs/include/mach/mxs.h @@ -23,22 +23,10 @@ #include <linux/io.h> #endif #include <asm/mach-types.h> +#include <mach/digctl.h> #include <mach/hardware.h> /* - * MXS CPU types - */ -#define cpu_is_mx23() ( \ - machine_is_mx23evk() || \ - machine_is_stmp378x() || \ - 0) -#define cpu_is_mx28() ( \ - machine_is_mx28evk() || \ - machine_is_m28evk() || \ - machine_is_tx28() || \ - 0) - -/* * IO addresses common to MXS-based */ #define MXS_IO_BASE_ADDR 0x80000000 @@ -109,6 +97,21 @@ static inline void __mxs_togl(u32 mask, void __iomem *reg) { __raw_writel(mask, reg + MXS_TOG_ADDR); } + +/* + * MXS CPU types + */ +#define MXS_CHIPID (MXS_IO_ADDRESS(MXS_DIGCTL_BASE_ADDR) + HW_DIGCTL_CHIPID) + +static inline int cpu_is_mx23(void) +{ + return ((__raw_readl(MXS_CHIPID) >> 16) == 0x3780); +} + +static inline int cpu_is_mx28(void) +{ + return ((__raw_readl(MXS_CHIPID) >> 16) == 0x2800); +} #endif #endif /* __MACH_MXS_H__ */ diff --git a/arch/arm/mach-mxs/include/mach/system.h b/arch/arm/mach-mxs/include/mach/system.h deleted file mode 100644 index e7ad1bb2942..00000000000 --- a/arch/arm/mach-mxs/include/mach/system.h +++ /dev/null @@ -1,25 +0,0 @@ -/* - * Copyright (C) 1999 ARM Limited - * Copyright (C) 2000 Deep Blue Solutions Ltd - * Copyright 2004-2008 Freescale Semiconductor, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef __MACH_MXS_SYSTEM_H__ -#define __MACH_MXS_SYSTEM_H__ - -static inline void arch_idle(void) -{ - cpu_do_idle(); -} - -#endif /* __MACH_MXS_SYSTEM_H__ */ diff --git a/arch/arm/mach-mxs/include/mach/uncompress.h b/arch/arm/mach-mxs/include/mach/uncompress.h index 67776746f14..ef281149544 100644 --- a/arch/arm/mach-mxs/include/mach/uncompress.h +++ b/arch/arm/mach-mxs/include/mach/uncompress.h @@ -18,8 +18,6 @@ #ifndef __MACH_MXS_UNCOMPRESS_H__ #define __MACH_MXS_UNCOMPRESS_H__ -#include <asm/mach-types.h> - unsigned long mxs_duart_base; #define MXS_DUART(x) (*(volatile unsigned long *)(mxs_duart_base + (x))) @@ -55,16 +53,17 @@ static inline void flush(void) #define MX23_DUART_BASE_ADDR 0x80070000 #define MX28_DUART_BASE_ADDR 0x80074000 +#define MXS_DIGCTL_CHIPID 0x8001c310 static inline void __arch_decomp_setup(unsigned long arch_id) { - switch (arch_id) { - case MACH_TYPE_MX23EVK: + u16 chipid = (*(volatile unsigned long *) MXS_DIGCTL_CHIPID) >> 16; + + switch (chipid) { + case 0x3780: mxs_duart_base = MX23_DUART_BASE_ADDR; break; - case MACH_TYPE_MX28EVK: - case MACH_TYPE_M28EVK: - case MACH_TYPE_TX28: + case 0x2800: mxs_duart_base = MX28_DUART_BASE_ADDR; break; default: diff --git a/arch/arm/mach-mxs/mach-apx4devkit.c b/arch/arm/mach-mxs/mach-apx4devkit.c new file mode 100644 index 00000000000..48a7fab571a --- /dev/null +++ b/arch/arm/mach-mxs/mach-apx4devkit.c @@ -0,0 +1,260 @@ +/* + * Copyright (C) 2011-2012 + * Lauri Hintsala, Bluegiga, <lauri.hintsala@bluegiga.com> + * Veli-Pekka Peltola, Bluegiga, <veli-pekka.peltola@bluegiga.com> + * + * based on: mach-mx28evk.c + * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/delay.h> +#include <linux/platform_device.h> +#include <linux/gpio.h> +#include <linux/leds.h> +#include <linux/clk.h> +#include <linux/i2c.h> +#include <linux/regulator/machine.h> +#include <linux/regulator/fixed.h> +#include <linux/micrel_phy.h> + +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/time.h> + +#include <mach/common.h> +#include <mach/digctl.h> +#include <mach/iomux-mx28.h> + +#include "devices-mx28.h" + +#define APX4DEVKIT_GPIO_USERLED MXS_GPIO_NR(3, 28) + +static const iomux_cfg_t apx4devkit_pads[] __initconst = { + /* duart */ + MX28_PAD_PWM0__DUART_RX | MXS_PAD_CTRL, + MX28_PAD_PWM1__DUART_TX | MXS_PAD_CTRL, + + /* auart0 */ + MX28_PAD_AUART0_RX__AUART0_RX | MXS_PAD_CTRL, + MX28_PAD_AUART0_TX__AUART0_TX | MXS_PAD_CTRL, + MX28_PAD_AUART0_CTS__AUART0_CTS | MXS_PAD_CTRL, + MX28_PAD_AUART0_RTS__AUART0_RTS | MXS_PAD_CTRL, + + /* auart1 */ + MX28_PAD_AUART1_RX__AUART1_RX | MXS_PAD_CTRL, + MX28_PAD_AUART1_TX__AUART1_TX | MXS_PAD_CTRL, + + /* auart2 */ + MX28_PAD_SSP2_SCK__AUART2_RX | MXS_PAD_CTRL, + MX28_PAD_SSP2_MOSI__AUART2_TX | MXS_PAD_CTRL, + + /* auart3 */ + MX28_PAD_SSP2_MISO__AUART3_RX | MXS_PAD_CTRL, + MX28_PAD_SSP2_SS0__AUART3_TX | MXS_PAD_CTRL, + +#define MXS_PAD_FEC (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP) + /* fec0 */ + MX28_PAD_ENET0_MDC__ENET0_MDC | MXS_PAD_FEC, + MX28_PAD_ENET0_MDIO__ENET0_MDIO | MXS_PAD_FEC, + MX28_PAD_ENET0_RX_EN__ENET0_RX_EN | MXS_PAD_FEC, + MX28_PAD_ENET0_RXD0__ENET0_RXD0 | MXS_PAD_FEC, + MX28_PAD_ENET0_RXD1__ENET0_RXD1 | MXS_PAD_FEC, + MX28_PAD_ENET0_TX_EN__ENET0_TX_EN | MXS_PAD_FEC, + MX28_PAD_ENET0_TXD0__ENET0_TXD0 | MXS_PAD_FEC, + MX28_PAD_ENET0_TXD1__ENET0_TXD1 | MXS_PAD_FEC, + MX28_PAD_ENET_CLK__CLKCTRL_ENET | MXS_PAD_FEC, + + /* i2c */ + MX28_PAD_I2C0_SCL__I2C0_SCL, + MX28_PAD_I2C0_SDA__I2C0_SDA, + + /* mmc0 */ + MX28_PAD_SSP0_DATA0__SSP0_D0 | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_SSP0_DATA1__SSP0_D1 | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_SSP0_DATA2__SSP0_D2 | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_SSP0_DATA3__SSP0_D3 | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_SSP0_DATA4__SSP0_D4 | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_SSP0_DATA5__SSP0_D5 | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_SSP0_DATA6__SSP0_D6 | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_SSP0_DATA7__SSP0_D7 | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_SSP0_CMD__SSP0_CMD | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL), + MX28_PAD_SSP0_SCK__SSP0_SCK | + (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_NOPULL), + + /* led */ + MX28_PAD_PWM3__GPIO_3_28 | MXS_PAD_CTRL, + + /* saif0 & saif1 */ + MX28_PAD_SAIF0_MCLK__SAIF0_MCLK | + (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK | + (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK | + (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0 | + (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_SAIF1_SDATA0__SAIF1_SDATA0 | + (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), +}; + +/* led */ +static const struct gpio_led apx4devkit_leds[] __initconst = { + { + .name = "user-led", + .default_trigger = "heartbeat", + .gpio = APX4DEVKIT_GPIO_USERLED, + }, +}; + +static const struct gpio_led_platform_data apx4devkit_led_data __initconst = { + .leds = apx4devkit_leds, + .num_leds = ARRAY_SIZE(apx4devkit_leds), +}; + +static const struct fec_platform_data mx28_fec_pdata __initconst = { + .phy = PHY_INTERFACE_MODE_RMII, +}; + +static const struct mxs_mmc_platform_data apx4devkit_mmc_pdata __initconst = { + .wp_gpio = -EINVAL, + .flags = SLOTF_4_BIT_CAPABLE, +}; + +static const struct i2c_board_info apx4devkit_i2c_boardinfo[] __initconst = { + { I2C_BOARD_INFO("sgtl5000", 0x0a) }, /* ASoC */ + { I2C_BOARD_INFO("pcf8563", 0x51) }, /* RTC */ +}; + +#if defined(CONFIG_REGULATOR_FIXED_VOLTAGE) || \ + defined(CONFIG_REGULATOR_FIXED_VOLTAGE_MODULE) +static struct regulator_consumer_supply apx4devkit_audio_consumer_supplies[] = { + REGULATOR_SUPPLY("VDDA", "0-000a"), + REGULATOR_SUPPLY("VDDIO", "0-000a"), +}; + +static struct regulator_init_data apx4devkit_vdd_reg_init_data = { + .constraints = { + .name = "3V3", + .always_on = 1, + }, + .consumer_supplies = apx4devkit_audio_consumer_supplies, + .num_consumer_supplies = ARRAY_SIZE(apx4devkit_audio_consumer_supplies), +}; + +static struct fixed_voltage_config apx4devkit_vdd_pdata = { + .supply_name = "board-3V3", + .microvolts = 3300000, + .gpio = -EINVAL, + .enabled_at_boot = 1, + .init_data = &apx4devkit_vdd_reg_init_data, +}; + +static struct platform_device apx4devkit_voltage_regulator = { + .name = "reg-fixed-voltage", + .id = -1, + .num_resources = 0, + .dev = { + .platform_data = &apx4devkit_vdd_pdata, + }, +}; + +static void __init apx4devkit_add_regulators(void) +{ + platform_device_register(&apx4devkit_voltage_regulator); +} +#else +static void __init apx4devkit_add_regulators(void) {} +#endif + +static const struct mxs_saif_platform_data + apx4devkit_mxs_saif_pdata[] __initconst = { + /* working on EXTMSTR0 mode (saif0 master, saif1 slave) */ + { + .master_mode = 1, + .master_id = 0, + }, { + .master_mode = 0, + .master_id = 0, + }, +}; + +static int apx4devkit_phy_fixup(struct phy_device *phy) +{ + phy->dev_flags |= MICREL_PHY_50MHZ_CLK; + return 0; +} + +static void __init apx4devkit_init(void) +{ + mxs_iomux_setup_multiple_pads(apx4devkit_pads, + ARRAY_SIZE(apx4devkit_pads)); + + mx28_add_duart(); + mx28_add_auart0(); + mx28_add_auart1(); + mx28_add_auart2(); + mx28_add_auart3(); + + /* + * Register fixup for the Micrel KS8031 PHY clock + * (shares same ID with KS8051) + */ + phy_register_fixup_for_uid(PHY_ID_KS8051, MICREL_PHY_ID_MASK, + apx4devkit_phy_fixup); + + mx28_add_fec(0, &mx28_fec_pdata); + + mx28_add_mxs_mmc(0, &apx4devkit_mmc_pdata); + + gpio_led_register_device(0, &apx4devkit_led_data); + + mxs_saif_clkmux_select(MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR0); + mx28_add_saif(0, &apx4devkit_mxs_saif_pdata[0]); + mx28_add_saif(1, &apx4devkit_mxs_saif_pdata[1]); + + apx4devkit_add_regulators(); + + mx28_add_mxs_i2c(0); + i2c_register_board_info(0, apx4devkit_i2c_boardinfo, + ARRAY_SIZE(apx4devkit_i2c_boardinfo)); + + mxs_add_platform_device("mxs-sgtl5000", 0, NULL, 0, NULL, 0); +} + +static void __init apx4devkit_timer_init(void) +{ + mx28_clocks_init(); +} + +static struct sys_timer apx4devkit_timer = { + .init = apx4devkit_timer_init, +}; + +MACHINE_START(APX4DEVKIT, "Bluegiga APX4 Development Kit") + .map_io = mx28_map_io, + .init_irq = mx28_init_irq, + .timer = &apx4devkit_timer, + .init_machine = apx4devkit_init, + .restart = mxs_restart, +MACHINE_END diff --git a/arch/arm/mach-mxs/mach-m28evk.c b/arch/arm/mach-mxs/mach-m28evk.c index 2f2758230ed..06d79963611 100644 --- a/arch/arm/mach-mxs/mach-m28evk.c +++ b/arch/arm/mach-mxs/mach-m28evk.c @@ -247,18 +247,15 @@ static int __init m28evk_fec_get_mac(void) u32 val; const u32 *ocotp = mxs_get_ocotp(); - if (!ocotp) { - pr_err("%s: timeout when reading fec mac from OCOTP\n", - __func__); + if (!ocotp) return -ETIMEDOUT; - } /* * OCOTP only stores the last 4 octets for each mac address, * so hard-code DENX OUI (C0:E5:4E) here. */ for (i = 0; i < 2; i++) { - val = ocotp[i * 4]; + val = ocotp[i]; mx28_fec_pdata[i].mac[0] = 0xC0; mx28_fec_pdata[i].mac[1] = 0xE5; mx28_fec_pdata[i].mac[2] = 0x4E; diff --git a/arch/arm/mach-mxs/mach-mx28evk.c b/arch/arm/mach-mxs/mach-mx28evk.c index fdb0a5664dd..e386c142f93 100644 --- a/arch/arm/mach-mxs/mach-mx28evk.c +++ b/arch/arm/mach-mxs/mach-mx28evk.c @@ -223,7 +223,6 @@ static const struct gpio_led_platform_data mx28evk_led_data __initconst = { /* fec */ static void __init mx28evk_fec_reset(void) { - int ret; struct clk *clk; /* Enable fec phy clock */ @@ -231,32 +230,7 @@ static void __init mx28evk_fec_reset(void) if (!IS_ERR(clk)) clk_prepare_enable(clk); - /* Power up fec phy */ - ret = gpio_request(MX28EVK_FEC_PHY_POWER, "fec-phy-power"); - if (ret) { - pr_err("Failed to request gpio fec-phy-%s: %d\n", "power", ret); - return; - } - - ret = gpio_direction_output(MX28EVK_FEC_PHY_POWER, 0); - if (ret) { - pr_err("Failed to drive gpio fec-phy-%s: %d\n", "power", ret); - return; - } - - /* Reset fec phy */ - ret = gpio_request(MX28EVK_FEC_PHY_RESET, "fec-phy-reset"); - if (ret) { - pr_err("Failed to request gpio fec-phy-%s: %d\n", "reset", ret); - return; - } - - gpio_direction_output(MX28EVK_FEC_PHY_RESET, 0); - if (ret) { - pr_err("Failed to drive gpio fec-phy-%s: %d\n", "reset", ret); - return; - } - + gpio_set_value(MX28EVK_FEC_PHY_RESET, 0); mdelay(1); gpio_set_value(MX28EVK_FEC_PHY_RESET, 1); } @@ -278,14 +252,14 @@ static int __init mx28evk_fec_get_mac(void) const u32 *ocotp = mxs_get_ocotp(); if (!ocotp) - goto error; + return -ETIMEDOUT; /* * OCOTP only stores the last 4 octets for each mac address, * so hard-code Freescale OUI (00:04:9f) here. */ for (i = 0; i < 2; i++) { - val = ocotp[i * 4]; + val = ocotp[i]; mx28_fec_pdata[i].mac[0] = 0x00; mx28_fec_pdata[i].mac[1] = 0x04; mx28_fec_pdata[i].mac[2] = 0x9f; @@ -295,10 +269,6 @@ static int __init mx28evk_fec_get_mac(void) } return 0; - -error: - pr_err("%s: timeout when reading fec mac from OCOTP\n", __func__); - return -ETIMEDOUT; } /* @@ -417,9 +387,14 @@ static void __init mx28evk_add_regulators(void) static void __init mx28evk_add_regulators(void) {} #endif -static struct gpio mx28evk_lcd_gpios[] = { +static const struct gpio mx28evk_gpios[] __initconst = { { MX28EVK_LCD_ENABLE, GPIOF_OUT_INIT_HIGH, "lcd-enable" }, { MX28EVK_BL_ENABLE, GPIOF_OUT_INIT_HIGH, "bl-enable" }, + { MX28EVK_FLEXCAN_SWITCH, GPIOF_DIR_OUT, "flexcan-switch" }, + { MX28EVK_MMC0_SLOT_POWER, GPIOF_OUT_INIT_LOW, "mmc0-slot-power" }, + { MX28EVK_MMC1_SLOT_POWER, GPIOF_OUT_INIT_LOW, "mmc1-slot-power" }, + { MX28EVK_FEC_PHY_POWER, GPIOF_OUT_INIT_LOW, "fec-phy-power" }, + { MX28EVK_FEC_PHY_RESET, GPIOF_DIR_OUT, "fec-phy-reset" }, }; static const struct mxs_saif_platform_data @@ -447,25 +422,18 @@ static void __init mx28evk_init(void) if (mx28evk_fec_get_mac()) pr_warn("%s: failed on fec mac setup\n", __func__); + ret = gpio_request_array(mx28evk_gpios, ARRAY_SIZE(mx28evk_gpios)); + if (ret) + pr_err("One or more GPIOs failed to be requested: %d\n", ret); + mx28evk_fec_reset(); mx28_add_fec(0, &mx28_fec_pdata[0]); mx28_add_fec(1, &mx28_fec_pdata[1]); - ret = gpio_request_one(MX28EVK_FLEXCAN_SWITCH, GPIOF_DIR_OUT, - "flexcan-switch"); - if (ret) { - pr_err("failed to request gpio flexcan-switch: %d\n", ret); - } else { - mx28_add_flexcan(0, &mx28evk_flexcan_pdata[0]); - mx28_add_flexcan(1, &mx28evk_flexcan_pdata[1]); - } + mx28_add_flexcan(0, &mx28evk_flexcan_pdata[0]); + mx28_add_flexcan(1, &mx28evk_flexcan_pdata[1]); - ret = gpio_request_array(mx28evk_lcd_gpios, - ARRAY_SIZE(mx28evk_lcd_gpios)); - if (ret) - pr_warn("failed to request gpio pins for lcd: %d\n", ret); - else - mx28_add_mxsfb(&mx28evk_mxsfb_pdata); + mx28_add_mxsfb(&mx28evk_mxsfb_pdata); mxs_saif_clkmux_select(MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR0); mx28_add_saif(0, &mx28evk_mxs_saif_pdata[0]); @@ -480,20 +448,8 @@ static void __init mx28evk_init(void) mxs_add_platform_device("mxs-sgtl5000", 0, NULL, 0, NULL, 0); - /* power on mmc slot by writing 0 to the gpio */ - ret = gpio_request_one(MX28EVK_MMC0_SLOT_POWER, GPIOF_OUT_INIT_LOW, - "mmc0-slot-power"); - if (ret) - pr_warn("failed to request gpio mmc0-slot-power: %d\n", ret); - else - mx28_add_mxs_mmc(0, &mx28evk_mmc_pdata[0]); - - ret = gpio_request_one(MX28EVK_MMC1_SLOT_POWER, GPIOF_OUT_INIT_LOW, - "mmc1-slot-power"); - if (ret) - pr_warn("failed to request gpio mmc1-slot-power: %d\n", ret); - else - mx28_add_mxs_mmc(1, &mx28evk_mmc_pdata[1]); + mx28_add_mxs_mmc(0, &mx28evk_mmc_pdata[0]); + mx28_add_mxs_mmc(1, &mx28evk_mmc_pdata[1]); mx28_add_rtc_stmp3xxx(); diff --git a/arch/arm/mach-mxs/pm.c b/arch/arm/mach-mxs/pm.c index fb042da29bd..a9b4bbcdafb 100644 --- a/arch/arm/mach-mxs/pm.c +++ b/arch/arm/mach-mxs/pm.c @@ -15,13 +15,12 @@ #include <linux/kernel.h> #include <linux/suspend.h> #include <linux/io.h> -#include <mach/system.h> static int mxs_suspend_enter(suspend_state_t state) { switch (state) { case PM_SUSPEND_MEM: - arch_idle(); + cpu_do_idle(); break; default: diff --git a/arch/arm/mach-netx/fb.c b/arch/arm/mach-netx/fb.c index b9913234bbf..2cdf6ef69be 100644 --- a/arch/arm/mach-netx/fb.c +++ b/arch/arm/mach-netx/fb.c @@ -92,18 +92,7 @@ void clk_put(struct clk *clk) { } -static struct amba_device fb_device = { - .dev = { - .init_name = "fb", - .coherent_dma_mask = ~0, - }, - .res = { - .start = 0x00104000, - .end = 0x00104fff, - .flags = IORESOURCE_MEM, - }, - .irq = { NETX_IRQ_LCD, NO_IRQ }, -}; +static AMBA_AHB_DEVICE(fb, "fb", 0, 0x00104000, { NETX_IRQ_LCD }, NULL); int netx_fb_init(struct clcd_board *board, struct clcd_panel *panel) { diff --git a/arch/arm/mach-netx/include/mach/system.h b/arch/arm/mach-netx/include/mach/system.h deleted file mode 100644 index b38fa36d58c..00000000000 --- a/arch/arm/mach-netx/include/mach/system.h +++ /dev/null @@ -1,28 +0,0 @@ -/* - * arch/arm/mach-netx/include/mach/system.h - * - * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 - * as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H - -static inline void arch_idle(void) -{ - cpu_do_idle(); -} - -#endif - diff --git a/arch/arm/mach-nomadik/board-nhk8815.c b/arch/arm/mach-nomadik/board-nhk8815.c index 7c878bf0034..f6f74adbe8c 100644 --- a/arch/arm/mach-nomadik/board-nhk8815.c +++ b/arch/arm/mach-nomadik/board-nhk8815.c @@ -185,20 +185,11 @@ static void __init nhk8815_onenand_init(void) #endif } -#define __MEM_4K_RESOURCE(x) \ - .res = {.start = (x), .end = (x) + SZ_4K - 1, .flags = IORESOURCE_MEM} +static AMBA_APB_DEVICE(uart0, "uart0", 0, NOMADIK_UART0_BASE, + { IRQ_UART0 }, NULL); -static struct amba_device uart0_device = { - .dev = { .init_name = "uart0" }, - __MEM_4K_RESOURCE(NOMADIK_UART0_BASE), - .irq = {IRQ_UART0, NO_IRQ}, -}; - -static struct amba_device uart1_device = { - .dev = { .init_name = "uart1" }, - __MEM_4K_RESOURCE(NOMADIK_UART1_BASE), - .irq = {IRQ_UART1, NO_IRQ}, -}; +static AMBA_APB_DEVICE(uart1, "uart1", 0, NOMADIK_UART1_BASE, + { IRQ_UART1 }, NULL); static struct amba_device *amba_devs[] __initdata = { &uart0_device, diff --git a/arch/arm/mach-nomadik/cpu-8815.c b/arch/arm/mach-nomadik/cpu-8815.c index 65df7b4fdd3..27f43a46985 100644 --- a/arch/arm/mach-nomadik/cpu-8815.c +++ b/arch/arm/mach-nomadik/cpu-8815.c @@ -97,12 +97,7 @@ static struct platform_device cpu8815_platform_gpio[] = { GPIO_DEVICE(3), }; -static struct amba_device cpu8815_amba_rng = { - .dev = { - .init_name = "rng", - }, - __MEM_4K_RESOURCE(NOMADIK_RNG_BASE), -}; +static AMBA_APB_DEVICE(cpu8815_amba_rng, "rng", 0, NOMADIK_RNG_BASE, { }, NULL); static struct platform_device *platform_devs[] __initdata = { cpu8815_platform_gpio + 0, @@ -112,7 +107,7 @@ static struct platform_device *platform_devs[] __initdata = { }; static struct amba_device *amba_devs[] __initdata = { - &cpu8815_amba_rng + &cpu8815_amba_rng_device }; static int __init cpu8815_init(void) diff --git a/arch/arm/mach-nomadik/include/mach/system.h b/arch/arm/mach-nomadik/include/mach/system.h deleted file mode 100644 index 25e198b8976..00000000000 --- a/arch/arm/mach-nomadik/include/mach/system.h +++ /dev/null @@ -1,32 +0,0 @@ -/* - * mach-nomadik/include/mach/system.h - * - * Copyright (C) 2008 STMicroelectronics - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H - -static inline void arch_idle(void) -{ - /* - * This should do all the clock switching - * and wait for interrupt tricks - */ - cpu_do_idle(); -} - -#endif diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig index 4f8d66f044e..4b6a774606c 100644 --- a/arch/arm/mach-omap1/Kconfig +++ b/arch/arm/mach-omap1/Kconfig @@ -155,6 +155,10 @@ config MACH_AMS_DELTA bool "Amstrad E3 (Delta)" depends on ARCH_OMAP1 && ARCH_OMAP15XX select FIQ + select GPIO_GENERIC_PLATFORM + select LEDS_GPIO_REGISTER + select REGULATOR + select REGULATOR_FIXED_VOLTAGE help Support for the Amstrad E3 (codename Delta) videophone. Say Y here if you have such a device. diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c index 88909cc0b25..cb6afe67046 100644 --- a/arch/arm/mach-omap1/board-ams-delta.c +++ b/arch/arm/mach-omap1/board-ams-delta.c @@ -11,6 +11,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ +#include <linux/basic_mmio_gpio.h> #include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> @@ -18,6 +19,9 @@ #include <linux/interrupt.h> #include <linux/leds.h> #include <linux/platform_device.h> +#include <linux/regulator/consumer.h> +#include <linux/regulator/fixed.h> +#include <linux/regulator/machine.h> #include <linux/serial_8250.h> #include <linux/export.h> @@ -40,9 +44,6 @@ #include <mach/ams-delta-fiq.h> -static u8 ams_delta_latch1_reg; -static u16 ams_delta_latch2_reg; - static const unsigned int ams_delta_keymap[] = { KEY(0, 0, KEY_F1), /* Advert */ @@ -121,49 +122,42 @@ static const unsigned int ams_delta_keymap[] = { KEY(7, 3, KEY_LEFTCTRL), /* Vol down */ }; -void ams_delta_latch1_write(u8 mask, u8 value) -{ - ams_delta_latch1_reg &= ~mask; - ams_delta_latch1_reg |= value; - *(volatile __u8 *) AMS_DELTA_LATCH1_VIRT = ams_delta_latch1_reg; -} - -void ams_delta_latch2_write(u16 mask, u16 value) -{ - ams_delta_latch2_reg &= ~mask; - ams_delta_latch2_reg |= value; - *(volatile __u16 *) AMS_DELTA_LATCH2_VIRT = ams_delta_latch2_reg; -} +#define LATCH1_PHYS 0x01000000 +#define LATCH1_VIRT 0xEA000000 +#define MODEM_PHYS 0x04000000 +#define MODEM_VIRT 0xEB000000 +#define LATCH2_PHYS 0x08000000 +#define LATCH2_VIRT 0xEC000000 static struct map_desc ams_delta_io_desc[] __initdata = { /* AMS_DELTA_LATCH1 */ { - .virtual = AMS_DELTA_LATCH1_VIRT, - .pfn = __phys_to_pfn(AMS_DELTA_LATCH1_PHYS), + .virtual = LATCH1_VIRT, + .pfn = __phys_to_pfn(LATCH1_PHYS), .length = 0x01000000, .type = MT_DEVICE }, /* AMS_DELTA_LATCH2 */ { - .virtual = AMS_DELTA_LATCH2_VIRT, - .pfn = __phys_to_pfn(AMS_DELTA_LATCH2_PHYS), + .virtual = LATCH2_VIRT, + .pfn = __phys_to_pfn(LATCH2_PHYS), .length = 0x01000000, .type = MT_DEVICE }, /* AMS_DELTA_MODEM */ { - .virtual = AMS_DELTA_MODEM_VIRT, - .pfn = __phys_to_pfn(AMS_DELTA_MODEM_PHYS), + .virtual = MODEM_VIRT, + .pfn = __phys_to_pfn(MODEM_PHYS), .length = 0x01000000, .type = MT_DEVICE } }; -static struct omap_lcd_config ams_delta_lcd_config = { +static struct omap_lcd_config ams_delta_lcd_config __initdata = { .ctrl_name = "internal", }; -static struct omap_usb_config ams_delta_usb_config __initdata = { +static struct omap_usb_config ams_delta_usb_config = { .register_host = 1, .hmc_mode = 16, .pins[0] = 2, @@ -173,6 +167,147 @@ static struct omap_board_config_kernel ams_delta_config[] __initdata = { { OMAP_TAG_LCD, &ams_delta_lcd_config }, }; +#define LATCH1_GPIO_BASE 232 +#define LATCH1_NGPIO 8 + +static struct resource latch1_resources[] = { + [0] = { + .name = "dat", + .start = LATCH1_PHYS, + .end = LATCH1_PHYS + (LATCH1_NGPIO - 1) / 8, + .flags = IORESOURCE_MEM, + }, +}; + +static struct bgpio_pdata latch1_pdata = { + .base = LATCH1_GPIO_BASE, + .ngpio = LATCH1_NGPIO, +}; + +static struct platform_device latch1_gpio_device = { + .name = "basic-mmio-gpio", + .id = 0, + .resource = latch1_resources, + .num_resources = ARRAY_SIZE(latch1_resources), + .dev = { + .platform_data = &latch1_pdata, + }, +}; + +static struct resource latch2_resources[] = { + [0] = { + .name = "dat", + .start = LATCH2_PHYS, + .end = LATCH2_PHYS + (AMS_DELTA_LATCH2_NGPIO - 1) / 8, + .flags = IORESOURCE_MEM, + }, +}; + +static struct bgpio_pdata latch2_pdata = { + .base = AMS_DELTA_LATCH2_GPIO_BASE, + .ngpio = AMS_DELTA_LATCH2_NGPIO, +}; + +static struct platform_device latch2_gpio_device = { + .name = "basic-mmio-gpio", + .id = 1, + .resource = latch2_resources, + .num_resources = ARRAY_SIZE(latch2_resources), + .dev = { + .platform_data = &latch2_pdata, + }, +}; + +static const struct gpio latch_gpios[] __initconst = { + { + .gpio = LATCH1_GPIO_BASE + 6, + .flags = GPIOF_OUT_INIT_LOW, + .label = "dockit1", + }, + { + .gpio = LATCH1_GPIO_BASE + 7, + .flags = GPIOF_OUT_INIT_LOW, + .label = "dockit2", + }, + { + .gpio = AMS_DELTA_GPIO_PIN_SCARD_RSTIN, + .flags = GPIOF_OUT_INIT_LOW, + .label = "scard_rstin", + }, + { + .gpio = AMS_DELTA_GPIO_PIN_SCARD_CMDVCC, + .flags = GPIOF_OUT_INIT_LOW, + .label = "scard_cmdvcc", + }, + { + .gpio = AMS_DELTA_GPIO_PIN_MODEM_CODEC, + .flags = GPIOF_OUT_INIT_LOW, + .label = "modem_codec", + }, + { + .gpio = AMS_DELTA_LATCH2_GPIO_BASE + 14, + .flags = GPIOF_OUT_INIT_LOW, + .label = "hookflash1", + }, + { + .gpio = AMS_DELTA_LATCH2_GPIO_BASE + 15, + .flags = GPIOF_OUT_INIT_LOW, + .label = "hookflash2", + }, +}; + +static struct regulator_consumer_supply modem_nreset_consumers[] = { + REGULATOR_SUPPLY("RESET#", "serial8250.1"), + REGULATOR_SUPPLY("POR", "cx20442-codec"), +}; + +static struct regulator_init_data modem_nreset_data = { + .constraints = { + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .boot_on = 1, + }, + .num_consumer_supplies = ARRAY_SIZE(modem_nreset_consumers), + .consumer_supplies = modem_nreset_consumers, +}; + +static struct fixed_voltage_config modem_nreset_config = { + .supply_name = "modem_nreset", + .microvolts = 3300000, + .gpio = AMS_DELTA_GPIO_PIN_MODEM_NRESET, + .startup_delay = 25000, + .enable_high = 1, + .enabled_at_boot = 1, + .init_data = &modem_nreset_data, +}; + +static struct platform_device modem_nreset_device = { + .name = "reg-fixed-voltage", + .id = -1, + .dev = { + .platform_data = &modem_nreset_config, + }, +}; + +struct modem_private_data { + struct regulator *regulator; +}; + +static struct modem_private_data modem_priv; + +void ams_delta_latch_write(int base, int ngpio, u16 mask, u16 value) +{ + int bit = 0; + u16 bitpos = 1 << bit; + + for (; bit < ngpio; bit++, bitpos = bitpos << 1) { + if (!(mask & bitpos)) + continue; + else + gpio_set_value(base + bit, (value & bitpos) != 0); + } +} +EXPORT_SYMBOL(ams_delta_latch_write); + static struct resource ams_delta_nand_resources[] = { [0] = { .start = OMAP1_MPUIO_BASE, @@ -202,7 +337,7 @@ static const struct matrix_keymap_data ams_delta_keymap_data = { .keymap_size = ARRAY_SIZE(ams_delta_keymap), }; -static struct omap_kp_platform_data ams_delta_kp_data __initdata = { +static struct omap_kp_platform_data ams_delta_kp_data = { .rows = 8, .cols = 8, .keymap_data = &ams_delta_keymap_data, @@ -224,9 +359,45 @@ static struct platform_device ams_delta_lcd_device = { .id = -1, }; -static struct platform_device ams_delta_led_device = { - .name = "ams-delta-led", - .id = -1 +static const struct gpio_led gpio_leds[] __initconst = { + { + .name = "camera", + .gpio = LATCH1_GPIO_BASE + 0, + .default_state = LEDS_GPIO_DEFSTATE_OFF, +#ifdef CONFIG_LEDS_TRIGGERS + .default_trigger = "ams_delta_camera", +#endif + }, + { + .name = "advert", + .gpio = LATCH1_GPIO_BASE + 1, + .default_state = LEDS_GPIO_DEFSTATE_OFF, + }, + { + .name = "email", + .gpio = LATCH1_GPIO_BASE + 2, + .default_state = LEDS_GPIO_DEFSTATE_OFF, + }, + { + .name = "handsfree", + .gpio = LATCH1_GPIO_BASE + 3, + .default_state = LEDS_GPIO_DEFSTATE_OFF, + }, + { + .name = "voicemail", + .gpio = LATCH1_GPIO_BASE + 4, + .default_state = LEDS_GPIO_DEFSTATE_OFF, + }, + { + .name = "voice", + .gpio = LATCH1_GPIO_BASE + 5, + .default_state = LEDS_GPIO_DEFSTATE_OFF, + }, +}; + +static const struct gpio_led_platform_data leds_pdata __initconst = { + .leds = gpio_leds, + .num_leds = ARRAY_SIZE(gpio_leds), }; static struct i2c_board_info ams_delta_camera_board_info[] = { @@ -275,13 +446,17 @@ static struct omap1_cam_platform_data ams_delta_camera_platform_data = { }; static struct platform_device *ams_delta_devices[] __initdata = { - &ams_delta_nand_device, + &latch1_gpio_device, + &latch2_gpio_device, &ams_delta_kp_device, - &ams_delta_lcd_device, - &ams_delta_led_device, &ams_delta_camera_device, }; +static struct platform_device *late_devices[] __initdata = { + &ams_delta_nand_device, + &ams_delta_lcd_device, +}; + static void __init ams_delta_init(void) { /* mux pins for uarts */ @@ -307,15 +482,13 @@ static void __init ams_delta_init(void) omap_serial_init(); omap_register_i2c_bus(1, 100, NULL, 0); - /* Clear latch2 (NAND, LCD, modem enable) */ - ams_delta_latch2_write(~0, 0); - omap1_usb_init(&ams_delta_usb_config); omap1_set_camera_info(&ams_delta_camera_platform_data); #ifdef CONFIG_LEDS_TRIGGERS led_trigger_register_simple("ams_delta_camera", &ams_delta_camera_led_trigger); #endif + gpio_led_register_device(-1, &leds_pdata); platform_add_devices(ams_delta_devices, ARRAY_SIZE(ams_delta_devices)); ams_delta_init_fiq(); @@ -323,16 +496,34 @@ static void __init ams_delta_init(void) omap_writew(omap_readw(ARM_RSTCT1) | 0x0004, ARM_RSTCT1); } +static void modem_pm(struct uart_port *port, unsigned int state, unsigned old) +{ + struct modem_private_data *priv = port->private_data; + + if (IS_ERR(priv->regulator)) + return; + + if (state == old) + return; + + if (state == 0) + regulator_enable(priv->regulator); + else if (old == 0) + regulator_disable(priv->regulator); +} + static struct plat_serial8250_port ams_delta_modem_ports[] = { { - .membase = IOMEM(AMS_DELTA_MODEM_VIRT), - .mapbase = AMS_DELTA_MODEM_PHYS, + .membase = IOMEM(MODEM_VIRT), + .mapbase = MODEM_PHYS, .irq = -EINVAL, /* changed later */ .flags = UPF_BOOT_AUTOCONF, .irqflags = IRQF_TRIGGER_RISING, .iotype = UPIO_MEM, .regshift = 1, .uartclk = BASE_BAUD * 16, + .pm = modem_pm, + .private_data = &modem_priv, }, { }, }; @@ -345,13 +536,27 @@ static struct platform_device ams_delta_modem_device = { }, }; -static int __init ams_delta_modem_init(void) +static int __init late_init(void) { int err; if (!machine_is_ams_delta()) return -ENODEV; + err = gpio_request_array(latch_gpios, ARRAY_SIZE(latch_gpios)); + if (err) { + pr_err("Couldn't take over latch1/latch2 GPIO pins\n"); + return err; + } + + platform_add_devices(late_devices, ARRAY_SIZE(late_devices)); + + err = platform_device_register(&modem_nreset_device); + if (err) { + pr_err("Couldn't register the modem regulator device\n"); + return err; + } + omap_cfg_reg(M14_1510_GPIO2); ams_delta_modem_ports[0].irq = gpio_to_irq(AMS_DELTA_GPIO_PIN_MODEM_IRQ); @@ -363,13 +568,35 @@ static int __init ams_delta_modem_init(void) } gpio_direction_input(AMS_DELTA_GPIO_PIN_MODEM_IRQ); - ams_delta_latch2_write( - AMS_DELTA_LATCH2_MODEM_NRESET | AMS_DELTA_LATCH2_MODEM_CODEC, - AMS_DELTA_LATCH2_MODEM_NRESET | AMS_DELTA_LATCH2_MODEM_CODEC); + /* Initialize the modem_nreset regulator consumer before use */ + modem_priv.regulator = ERR_PTR(-ENODEV); + + ams_delta_latch2_write(AMS_DELTA_LATCH2_MODEM_CODEC, + AMS_DELTA_LATCH2_MODEM_CODEC); + + err = platform_device_register(&ams_delta_modem_device); + if (err) + goto gpio_free; - return platform_device_register(&ams_delta_modem_device); + /* + * Once the modem device is registered, the modem_nreset + * regulator can be requested on behalf of that device. + */ + modem_priv.regulator = regulator_get(&ams_delta_modem_device.dev, + "RESET#"); + if (IS_ERR(modem_priv.regulator)) { + err = PTR_ERR(modem_priv.regulator); + goto unregister; + } + return 0; + +unregister: + platform_device_unregister(&ams_delta_modem_device); +gpio_free: + gpio_free(AMS_DELTA_GPIO_PIN_MODEM_IRQ); + return err; } -arch_initcall(ams_delta_modem_init); +late_initcall(late_init); static void __init ams_delta_map_io(void) { @@ -388,6 +615,3 @@ MACHINE_START(AMS_DELTA, "Amstrad E3 (Delta)") .timer = &omap1_timer, .restart = omap1_restart, MACHINE_END - -EXPORT_SYMBOL(ams_delta_latch1_write); -EXPORT_SYMBOL(ams_delta_latch2_write); diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c index 309369ea697..be2002f42de 100644 --- a/arch/arm/mach-omap1/board-innovator.c +++ b/arch/arm/mach-omap1/board-innovator.c @@ -416,13 +416,13 @@ static void __init innovator_init(void) #ifdef CONFIG_ARCH_OMAP15XX if (cpu_is_omap1510()) { omap1_usb_init(&innovator1510_usb_config); - innovator_config[1].data = &innovator1510_lcd_config; + innovator_config[0].data = &innovator1510_lcd_config; } #endif #ifdef CONFIG_ARCH_OMAP16XX if (cpu_is_omap1610()) { omap1_usb_init(&h2_usb_config); - innovator_config[1].data = &innovator1610_lcd_config; + innovator_config[0].data = &innovator1610_lcd_config; } #endif omap_board_config = innovator_config; diff --git a/arch/arm/mach-omap1/include/mach/system.h b/arch/arm/mach-omap1/include/mach/system.h deleted file mode 100644 index a6c1b3a16df..00000000000 --- a/arch/arm/mach-omap1/include/mach/system.h +++ /dev/null @@ -1,5 +0,0 @@ -/* - * arch/arm/mach-omap1/include/mach/system.h - */ - -#include <plat/system.h> diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c index 89ea20ca0cc..0c2c3669d59 100644 --- a/arch/arm/mach-omap1/pm.c +++ b/arch/arm/mach-omap1/pm.c @@ -42,9 +42,9 @@ #include <linux/sysfs.h> #include <linux/module.h> #include <linux/io.h> +#include <linux/atomic.h> #include <asm/irq.h> -#include <linux/atomic.h> #include <asm/mach/time.h> #include <asm/mach/irq.h> @@ -108,13 +108,7 @@ void omap1_pm_idle(void) __u32 use_idlect1 = arm_idlect1_mask; int do_sleep = 0; - local_irq_disable(); local_fiq_disable(); - if (need_resched()) { - local_fiq_enable(); - local_irq_enable(); - return; - } #if defined(CONFIG_OMAP_MPU_TIMER) && !defined(CONFIG_OMAP_DM_TIMER) #warning Enable 32kHz OS timer in order to allow sleep states in idle @@ -157,14 +151,12 @@ void omap1_pm_idle(void) omap_writel(saved_idlect1, ARM_IDLECT1); local_fiq_enable(); - local_irq_enable(); return; } omap_sram_suspend(omap_readl(ARM_IDLECT1), omap_readl(ARM_IDLECT2)); local_fiq_enable(); - local_irq_enable(); } /* @@ -583,8 +575,6 @@ static void omap_pm_init_proc(void) #endif /* DEBUG && CONFIG_PROC_FS */ -static void (*saved_idle)(void) = NULL; - /* * omap_pm_prepare - Do preliminary suspend work. * @@ -592,8 +582,7 @@ static void (*saved_idle)(void) = NULL; static int omap_pm_prepare(void) { /* We cannot sleep in idle until we have resumed */ - saved_idle = pm_idle; - pm_idle = NULL; + disable_hlt(); return 0; } @@ -630,7 +619,7 @@ static int omap_pm_enter(suspend_state_t state) static void omap_pm_finish(void) { - pm_idle = saved_idle; + enable_hlt(); } @@ -687,7 +676,7 @@ static int __init omap_pm_init(void) return -ENODEV; } - pm_idle = omap1_pm_idle; + arm_pm_idle = omap1_pm_idle; if (cpu_is_omap7xx()) setup_irq(INT_7XX_WAKE_UP_REQ, &omap_wakeup_irq); diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index d965da45160..b740c2e88e5 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -245,10 +245,11 @@ config MACH_NOKIA_N8X0 select MACH_NOKIA_N810_WIMAX config MACH_NOKIA_RM680 - bool "Nokia RM-680 board" + bool "Nokia RM-680/696 board" depends on ARCH_OMAP3 default y select OMAP_PACKAGE_CBB + select MACH_NOKIA_RM696 config MACH_NOKIA_RX51 bool "Nokia RX-51 board" @@ -364,8 +365,8 @@ config OMAP3_SDRC_AC_TIMING going on could result in system crashes; config OMAP4_ERRATA_I688 - bool "OMAP4 errata: Async Bridge Corruption (BROKEN)" - depends on ARCH_OMAP4 && BROKEN + bool "OMAP4 errata: Async Bridge Corruption" + depends on ARCH_OMAP4 select ARCH_HAS_BARRIERS help If a data is stalled inside asynchronous bridge because of back diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index bd76394ccaf..8d6bcca653b 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -270,4 +270,7 @@ smsc911x-$(CONFIG_SMSC911X) := gpmc-smsc911x.o obj-y += $(smsc911x-m) $(smsc911x-y) obj-$(CONFIG_ARCH_OMAP4) += hwspinlock.o +emac-$(CONFIG_TI_DAVINCI_EMAC) := am35xx-emac.o +obj-y += $(emac-m) $(emac-y) + obj-y += common-board-devices.o twl-common.o diff --git a/arch/arm/mach-omap2/am35xx-emac.c b/arch/arm/mach-omap2/am35xx-emac.c new file mode 100644 index 00000000000..1f97e747520 --- /dev/null +++ b/arch/arm/mach-omap2/am35xx-emac.c @@ -0,0 +1,117 @@ +/* + * Copyright (C) 2011 Ilya Yanok, Emcraft Systems + * + * Based on mach-omap2/board-am3517evm.c + * Copyright (C) 2009 Texas Instruments Incorporated + * Author: Ranjith Lohithakshan <ranjithl@ti.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * published by the Free Software Foundation. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any kind, + * whether express or implied; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + */ + +#include <linux/clk.h> +#include <linux/davinci_emac.h> +#include <linux/platform_device.h> +#include <plat/irqs.h> +#include <mach/am35xx.h> + +#include "control.h" + +static struct mdio_platform_data am35xx_emac_mdio_pdata; + +static struct resource am35xx_emac_mdio_resources[] = { + DEFINE_RES_MEM(AM35XX_IPSS_EMAC_BASE + AM35XX_EMAC_MDIO_OFFSET, SZ_4K), +}; + +static struct platform_device am35xx_emac_mdio_device = { + .name = "davinci_mdio", + .id = 0, + .num_resources = ARRAY_SIZE(am35xx_emac_mdio_resources), + .resource = am35xx_emac_mdio_resources, + .dev.platform_data = &am35xx_emac_mdio_pdata, +}; + +static void am35xx_enable_emac_int(void) +{ + u32 regval; + + regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR); + regval = (regval | AM35XX_CPGMAC_C0_RX_PULSE_CLR | + AM35XX_CPGMAC_C0_TX_PULSE_CLR | + AM35XX_CPGMAC_C0_MISC_PULSE_CLR | + AM35XX_CPGMAC_C0_RX_THRESH_CLR); + omap_ctrl_writel(regval, AM35XX_CONTROL_LVL_INTR_CLEAR); + regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR); +} + +static void am35xx_disable_emac_int(void) +{ + u32 regval; + + regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR); + regval = (regval | AM35XX_CPGMAC_C0_RX_PULSE_CLR | + AM35XX_CPGMAC_C0_TX_PULSE_CLR); + omap_ctrl_writel(regval, AM35XX_CONTROL_LVL_INTR_CLEAR); + regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR); +} + +static struct emac_platform_data am35xx_emac_pdata = { + .ctrl_reg_offset = AM35XX_EMAC_CNTRL_OFFSET, + .ctrl_mod_reg_offset = AM35XX_EMAC_CNTRL_MOD_OFFSET, + .ctrl_ram_offset = AM35XX_EMAC_CNTRL_RAM_OFFSET, + .ctrl_ram_size = AM35XX_EMAC_CNTRL_RAM_SIZE, + .hw_ram_addr = AM35XX_EMAC_HW_RAM_ADDR, + .version = EMAC_VERSION_2, + .interrupt_enable = am35xx_enable_emac_int, + .interrupt_disable = am35xx_disable_emac_int, +}; + +static struct resource am35xx_emac_resources[] = { + DEFINE_RES_MEM(AM35XX_IPSS_EMAC_BASE, 0x30000), + DEFINE_RES_IRQ(INT_35XX_EMAC_C0_RXTHRESH_IRQ), + DEFINE_RES_IRQ(INT_35XX_EMAC_C0_RX_PULSE_IRQ), + DEFINE_RES_IRQ(INT_35XX_EMAC_C0_TX_PULSE_IRQ), + DEFINE_RES_IRQ(INT_35XX_EMAC_C0_MISC_PULSE_IRQ), +}; + +static struct platform_device am35xx_emac_device = { + .name = "davinci_emac", + .id = -1, + .num_resources = ARRAY_SIZE(am35xx_emac_resources), + .resource = am35xx_emac_resources, + .dev = { + .platform_data = &am35xx_emac_pdata, + }, +}; + +void __init am35xx_emac_init(unsigned long mdio_bus_freq, u8 rmii_en) +{ + unsigned int regval; + int err; + + am35xx_emac_pdata.rmii_en = rmii_en; + am35xx_emac_mdio_pdata.bus_freq = mdio_bus_freq; + err = platform_device_register(&am35xx_emac_device); + if (err) { + pr_err("AM35x: failed registering EMAC device: %d\n", err); + return; + } + + err = platform_device_register(&am35xx_emac_mdio_device); + if (err) { + pr_err("AM35x: failed registering EMAC MDIO device: %d\n", err); + platform_device_unregister(&am35xx_emac_device); + return; + } + + regval = omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET); + regval = regval & (~(AM35XX_CPGMACSS_SW_RST)); + omap_ctrl_writel(regval, AM35XX_CONTROL_IP_SW_RESET); + regval = omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET); +} diff --git a/arch/arm/mach-omap2/am35xx-emac.h b/arch/arm/mach-omap2/am35xx-emac.h new file mode 100644 index 00000000000..15c6f9ce59a --- /dev/null +++ b/arch/arm/mach-omap2/am35xx-emac.h @@ -0,0 +1,15 @@ +/* + * Copyright (C) 2011 Ilya Yanok, Emcraft Systems + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#define AM35XX_DEFAULT_MDIO_FREQUENCY 1000000 + +#if defined(CONFIG_TI_DAVINCI_EMAC) || defined(CONFIG_TI_DAVINCI_EMAC_MODULE) +void am35xx_emac_init(unsigned long mdio_bus_freq, u8 rmii_en); +#else +static inline void am35xx_emac_init(unsigned long mdio_bus_freq, u8 rmii_en) {} +#endif diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index 90c76d340fb..7116ce2321c 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -323,7 +323,10 @@ static struct spi_board_info sdp4430_spi_board_info[] __initdata = { .bus_num = 1, .chip_select = 0, .max_speed_hz = 24000000, - .irq = ETH_KS8851_IRQ, + /* + * .irq is set to gpio_to_irq(ETH_KS8851_IRQ) + * in omap_4430sdp_init + */ }, }; diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c index 4b1cfe32e6b..005905b6ef2 100644 --- a/arch/arm/mach-omap2/board-am3517evm.c +++ b/arch/arm/mach-omap2/board-am3517evm.c @@ -39,124 +39,11 @@ #include <video/omap-panel-generic-dpi.h> #include <video/omap-panel-dvi.h> +#include "am35xx-emac.h" #include "mux.h" #include "control.h" #include "hsmmc.h" -#define AM35XX_EVM_MDIO_FREQUENCY (1000000) - -static struct mdio_platform_data am3517_evm_mdio_pdata = { - .bus_freq = AM35XX_EVM_MDIO_FREQUENCY, -}; - -static struct resource am3517_mdio_resources[] = { - { - .start = AM35XX_IPSS_EMAC_BASE + AM35XX_EMAC_MDIO_OFFSET, - .end = AM35XX_IPSS_EMAC_BASE + AM35XX_EMAC_MDIO_OFFSET + - SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device am3517_mdio_device = { - .name = "davinci_mdio", - .id = 0, - .num_resources = ARRAY_SIZE(am3517_mdio_resources), - .resource = am3517_mdio_resources, - .dev.platform_data = &am3517_evm_mdio_pdata, -}; - -static struct emac_platform_data am3517_evm_emac_pdata = { - .rmii_en = 1, -}; - -static struct resource am3517_emac_resources[] = { - { - .start = AM35XX_IPSS_EMAC_BASE, - .end = AM35XX_IPSS_EMAC_BASE + 0x2FFFF, - .flags = IORESOURCE_MEM, - }, - { - .start = INT_35XX_EMAC_C0_RXTHRESH_IRQ, - .end = INT_35XX_EMAC_C0_RXTHRESH_IRQ, - .flags = IORESOURCE_IRQ, - }, - { - .start = INT_35XX_EMAC_C0_RX_PULSE_IRQ, - .end = INT_35XX_EMAC_C0_RX_PULSE_IRQ, - .flags = IORESOURCE_IRQ, - }, - { - .start = INT_35XX_EMAC_C0_TX_PULSE_IRQ, - .end = INT_35XX_EMAC_C0_TX_PULSE_IRQ, - .flags = IORESOURCE_IRQ, - }, - { - .start = INT_35XX_EMAC_C0_MISC_PULSE_IRQ, - .end = INT_35XX_EMAC_C0_MISC_PULSE_IRQ, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device am3517_emac_device = { - .name = "davinci_emac", - .id = -1, - .num_resources = ARRAY_SIZE(am3517_emac_resources), - .resource = am3517_emac_resources, -}; - -static void am3517_enable_ethernet_int(void) -{ - u32 regval; - - regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR); - regval = (regval | AM35XX_CPGMAC_C0_RX_PULSE_CLR | - AM35XX_CPGMAC_C0_TX_PULSE_CLR | - AM35XX_CPGMAC_C0_MISC_PULSE_CLR | - AM35XX_CPGMAC_C0_RX_THRESH_CLR); - omap_ctrl_writel(regval, AM35XX_CONTROL_LVL_INTR_CLEAR); - regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR); -} - -static void am3517_disable_ethernet_int(void) -{ - u32 regval; - - regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR); - regval = (regval | AM35XX_CPGMAC_C0_RX_PULSE_CLR | - AM35XX_CPGMAC_C0_TX_PULSE_CLR); - omap_ctrl_writel(regval, AM35XX_CONTROL_LVL_INTR_CLEAR); - regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR); -} - -static void am3517_evm_ethernet_init(struct emac_platform_data *pdata) -{ - unsigned int regval; - - pdata->ctrl_reg_offset = AM35XX_EMAC_CNTRL_OFFSET; - pdata->ctrl_mod_reg_offset = AM35XX_EMAC_CNTRL_MOD_OFFSET; - pdata->ctrl_ram_offset = AM35XX_EMAC_CNTRL_RAM_OFFSET; - pdata->ctrl_ram_size = AM35XX_EMAC_CNTRL_RAM_SIZE; - pdata->version = EMAC_VERSION_2; - pdata->hw_ram_addr = AM35XX_EMAC_HW_RAM_ADDR; - pdata->interrupt_enable = am3517_enable_ethernet_int; - pdata->interrupt_disable = am3517_disable_ethernet_int; - am3517_emac_device.dev.platform_data = pdata; - platform_device_register(&am3517_emac_device); - platform_device_register(&am3517_mdio_device); - clk_add_alias(NULL, dev_name(&am3517_mdio_device.dev), - NULL, &am3517_emac_device.dev); - - regval = omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET); - regval = regval & (~(AM35XX_CPGMACSS_SW_RST)); - omap_ctrl_writel(regval, AM35XX_CONTROL_IP_SW_RESET); - regval = omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET); - - return ; -} - - - #define LCD_PANEL_PWR 176 #define LCD_PANEL_BKLIGHT_PWR 182 #define LCD_PANEL_PWM 181 @@ -498,7 +385,7 @@ static void __init am3517_evm_init(void) i2c_register_board_info(1, am3517evm_i2c1_boardinfo, ARRAY_SIZE(am3517evm_i2c1_boardinfo)); /*Ethernet*/ - am3517_evm_ethernet_init(&am3517_evm_emac_pdata); + am35xx_emac_init(AM35XX_DEFAULT_MDIO_FREQUENCY, 1); /* MUSB */ am3517_evm_musb_init(); diff --git a/arch/arm/mach-omap2/board-cm-t3517.c b/arch/arm/mach-omap2/board-cm-t3517.c index f36d694d215..9e66e167e4f 100644 --- a/arch/arm/mach-omap2/board-cm-t3517.c +++ b/arch/arm/mach-omap2/board-cm-t3517.c @@ -49,6 +49,7 @@ #include "mux.h" #include "control.h" #include "common-board-devices.h" +#include "am35xx-emac.h" #if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE) static struct gpio_led cm_t3517_leds[] = { @@ -291,6 +292,7 @@ static void __init cm_t3517_init(void) cm_t3517_init_rtc(); cm_t3517_init_usbh(); cm_t3517_init_hecc(); + am35xx_emac_init(AM35XX_DEFAULT_MDIO_FREQUENCY, 1); } MACHINE_START(CM_T3517, "Compulab CM-T3517") diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c index 42a4d11fad2..67226271760 100644 --- a/arch/arm/mach-omap2/board-n8x0.c +++ b/arch/arm/mach-omap2/board-n8x0.c @@ -371,7 +371,11 @@ static void n8x0_mmc_callback(void *data, u8 card_mask) else *openp = 0; +#ifdef CONFIG_MMC_OMAP omap_mmc_notify_cover_event(mmc_device, index, *openp); +#else + pr_warn("MMC: notify cover event not available\n"); +#endif } static int n8x0_mmc_late_init(struct device *dev) diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index c775bead149..c877236a844 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -381,7 +381,7 @@ static int omap3evm_twl_gpio_setup(struct device *dev, gpio_request_one(gpio + 7, GPIOF_OUT_INIT_LOW, "EN_DVI"); /* TWL4030_GPIO_MAX + 1 == ledB (out, active low LED) */ - gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1; + gpio_leds[0].gpio = gpio + TWL4030_GPIO_MAX + 1; platform_device_register(&leds_gpio); diff --git a/arch/arm/mach-omap2/board-omap3logic.c b/arch/arm/mach-omap2/board-omap3logic.c index 4198dd017d8..221214fa1ce 100644 --- a/arch/arm/mach-omap2/board-omap3logic.c +++ b/arch/arm/mach-omap2/board-omap3logic.c @@ -205,6 +205,7 @@ static void __init omap3logic_init(void) MACHINE_START(OMAP3_TORPEDO, "Logic OMAP3 Torpedo board") .atag_offset = 0x100, + .reserve = omap_reserve, .map_io = omap3_map_io, .init_early = omap35xx_init_early, .init_irq = omap3_init_irq, @@ -216,6 +217,7 @@ MACHINE_END MACHINE_START(OMAP3530_LV_SOM, "OMAP Logic 3530 LV SOM board") .atag_offset = 0x100, + .reserve = omap_reserve, .map_io = omap3_map_io, .init_early = omap35xx_init_early, .init_irq = omap3_init_irq, diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c index 1644b73017f..94dbf081207 100644 --- a/arch/arm/mach-omap2/board-omap3pandora.c +++ b/arch/arm/mach-omap2/board-omap3pandora.c @@ -121,6 +121,11 @@ static struct platform_device pandora_leds_gpio = { }, }; +static struct platform_device pandora_backlight = { + .name = "pandora-backlight", + .id = -1, +}; + #define GPIO_BUTTON(gpio_num, ev_type, ev_code, act_low, descr) \ { \ .gpio = gpio_num, \ @@ -476,6 +481,10 @@ static struct platform_device pandora_vwlan_device = { static struct twl4030_bci_platform_data pandora_bci_data; +static struct twl4030_power_data pandora_power_data = { + .use_poweroff = true, +}; + static struct twl4030_platform_data omap3pandora_twldata = { .gpio = &omap3pandora_gpio_data, .vmmc1 = &pandora_vmmc1, @@ -486,6 +495,7 @@ static struct twl4030_platform_data omap3pandora_twldata = { .vsim = &pandora_vsim, .keypad = &pandora_kp_data, .bci = &pandora_bci_data, + .power = &pandora_power_data, }; static struct i2c_board_info __initdata omap3pandora_i2c3_boardinfo[] = { @@ -557,6 +567,7 @@ static struct platform_device *omap3pandora_devices[] __initdata = { &pandora_leds_gpio, &pandora_keys_gpio, &pandora_vwlan_device, + &pandora_backlight, }; static const struct usbhs_omap_board_data usbhs_bdata __initconst = { diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index 1af564b0487..786674971a6 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -116,10 +116,16 @@ static struct platform_device panda_abe_audio = { }, }; +static struct platform_device btwilink_device = { + .name = "btwilink", + .id = -1, +}; + static struct platform_device *panda_devices[] __initdata = { &leds_gpio, &wl1271_device, &panda_abe_audio, + &btwilink_device, }; static const struct usbhs_omap_board_data usbhs_bdata __initconst = { diff --git a/arch/arm/mach-omap2/board-rm680.c b/arch/arm/mach-omap2/board-rm680.c index 8678b386c6a..094473e2a81 100644 --- a/arch/arm/mach-omap2/board-rm680.c +++ b/arch/arm/mach-omap2/board-rm680.c @@ -1,5 +1,5 @@ /* - * Board support file for Nokia RM-680. + * Board support file for Nokia RM-680/696. * * Copyright (C) 2010 Nokia * @@ -154,3 +154,15 @@ MACHINE_START(NOKIA_RM680, "Nokia RM-680 board") .timer = &omap3_timer, .restart = omap_prcm_restart, MACHINE_END + +MACHINE_START(NOKIA_RM696, "Nokia RM-696 board") + .atag_offset = 0x100, + .reserve = omap_reserve, + .map_io = omap3_map_io, + .init_early = omap3630_init_early, + .init_irq = omap3_init_irq, + .handle_irq = omap3_intc_handle_irq, + .init_machine = rm680_init, + .timer = &omap3_timer, + .restart = omap_prcm_restart, +MACHINE_END diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index acb4e77b39e..33c1f8c5035 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -1105,6 +1105,11 @@ static struct tsc2005_platform_data tsc2005_pdata = { .esd_timeout_ms = 8000, }; +static struct gpio rx51_tsc2005_gpios[] __initdata = { + { RX51_TSC2005_IRQ_GPIO, GPIOF_IN, "tsc2005 IRQ" }, + { RX51_TSC2005_RESET_GPIO, GPIOF_OUT_INIT_HIGH, "tsc2005 reset" }, +}; + static void rx51_tsc2005_set_reset(bool enable) { gpio_set_value(RX51_TSC2005_RESET_GPIO, enable); @@ -1114,20 +1119,18 @@ static void __init rx51_init_tsc2005(void) { int r; - r = gpio_request_one(RX51_TSC2005_IRQ_GPIO, GPIOF_IN, "tsc2005 IRQ"); - if (r < 0) { - printk(KERN_ERR "unable to get %s GPIO\n", "tsc2005 IRQ"); - rx51_peripherals_spi_board_info[RX51_SPI_TSC2005].irq = 0; - } + omap_mux_init_gpio(RX51_TSC2005_RESET_GPIO, OMAP_PIN_OUTPUT); + omap_mux_init_gpio(RX51_TSC2005_IRQ_GPIO, OMAP_PIN_INPUT_PULLUP); - r = gpio_request_one(RX51_TSC2005_RESET_GPIO, GPIOF_OUT_INIT_HIGH, - "tsc2005 reset"); - if (r >= 0) { - tsc2005_pdata.set_reset = rx51_tsc2005_set_reset; - } else { - printk(KERN_ERR "unable to get %s GPIO\n", "tsc2005 reset"); + r = gpio_request_array(rx51_tsc2005_gpios, + ARRAY_SIZE(rx51_tsc2005_gpios)); + if (r < 0) { + printk(KERN_ERR "tsc2005 board initialization failed\n"); tsc2005_pdata.esd_timeout_ms = 0; + return; } + + tsc2005_pdata.set_reset = rx51_tsc2005_set_reset; } void __init rx51_peripherals_init(void) diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h index febffde2ff1..7e9338e8d68 100644 --- a/arch/arm/mach-omap2/common.h +++ b/arch/arm/mach-omap2/common.h @@ -132,6 +132,7 @@ void omap3_map_io(void); void am33xx_map_io(void); void omap4_map_io(void); void ti81xx_map_io(void); +void omap_barriers_init(void); /** * omap_test_timeout - busy-loop, testing a condition diff --git a/arch/arm/mach-omap2/cpuidle44xx.c b/arch/arm/mach-omap2/cpuidle44xx.c index cfdbb86bc84..72e018b9b26 100644 --- a/arch/arm/mach-omap2/cpuidle44xx.c +++ b/arch/arm/mach-omap2/cpuidle44xx.c @@ -65,7 +65,6 @@ static int omap4_enter_idle(struct cpuidle_device *dev, struct timespec ts_preidle, ts_postidle, ts_idle; u32 cpu1_state; int idle_time; - int new_state_idx; int cpu_id = smp_processor_id(); /* Used to keep track of the total time in idle */ @@ -84,8 +83,8 @@ static int omap4_enter_idle(struct cpuidle_device *dev, */ cpu1_state = pwrdm_read_pwrst(cpu1_pd); if (cpu1_state != PWRDM_POWER_OFF) { - new_state_idx = drv->safe_state_index; - cx = cpuidle_get_statedata(&dev->states_usage[new_state_idx]); + index = drv->safe_state_index; + cx = cpuidle_get_statedata(&dev->states_usage[index]); } if (index > 0) diff --git a/arch/arm/mach-omap2/emu.c b/arch/arm/mach-omap2/emu.c index 9c442e290cc..ce91aad4cda 100644 --- a/arch/arm/mach-omap2/emu.c +++ b/arch/arm/mach-omap2/emu.c @@ -30,29 +30,8 @@ MODULE_AUTHOR("Alexander Shishkin"); #define ETB_BASE (L4_EMU_34XX_PHYS + 0x1b000) #define DAPCTL (L4_EMU_34XX_PHYS + 0x1d000) -static struct amba_device omap3_etb_device = { - .dev = { - .init_name = "etb", - }, - .res = { - .start = ETB_BASE, - .end = ETB_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - .periphid = 0x000bb907, -}; - -static struct amba_device omap3_etm_device = { - .dev = { - .init_name = "etm", - }, - .res = { - .start = ETM_BASE, - .end = ETM_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - .periphid = 0x102bb921, -}; +static AMBA_APB_DEVICE(omap3_etb, "etb", 0x000bb907, ETB_BASE, { }, NULL); +static AMBA_APB_DEVICE(omap3_etm, "etm", 0x102bb921, ETM_BASE, { }, NULL); static int __init emu_init(void) { @@ -66,4 +45,3 @@ static int __init emu_init(void) } subsys_initcall(emu_init); - diff --git a/arch/arm/mach-omap2/gpmc-smsc911x.c b/arch/arm/mach-omap2/gpmc-smsc911x.c index 997033129d2..bbb870c04a5 100644 --- a/arch/arm/mach-omap2/gpmc-smsc911x.c +++ b/arch/arm/mach-omap2/gpmc-smsc911x.c @@ -19,6 +19,8 @@ #include <linux/interrupt.h> #include <linux/io.h> #include <linux/smsc911x.h> +#include <linux/regulator/fixed.h> +#include <linux/regulator/machine.h> #include <plat/board.h> #include <plat/gpmc.h> @@ -42,6 +44,50 @@ static struct smsc911x_platform_config gpmc_smsc911x_config = { .flags = SMSC911X_USE_16BIT, }; +static struct regulator_consumer_supply gpmc_smsc911x_supply[] = { + REGULATOR_SUPPLY("vddvario", "smsc911x.0"), + REGULATOR_SUPPLY("vdd33a", "smsc911x.0"), +}; + +/* Generic regulator definition to satisfy smsc911x */ +static struct regulator_init_data gpmc_smsc911x_reg_init_data = { + .constraints = { + .min_uV = 3300000, + .max_uV = 3300000, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(gpmc_smsc911x_supply), + .consumer_supplies = gpmc_smsc911x_supply, +}; + +static struct fixed_voltage_config gpmc_smsc911x_fixed_reg_data = { + .supply_name = "gpmc_smsc911x", + .microvolts = 3300000, + .gpio = -EINVAL, + .startup_delay = 0, + .enable_high = 0, + .enabled_at_boot = 1, + .init_data = &gpmc_smsc911x_reg_init_data, +}; + +/* + * Platform device id of 42 is a temporary fix to avoid conflicts + * with other reg-fixed-voltage devices. The real fix should + * involve the driver core providing a way of dynamically + * assigning a unique id on registration for platform devices + * in the same name space. + */ +static struct platform_device gpmc_smsc911x_regulator = { + .name = "reg-fixed-voltage", + .id = 42, + .dev = { + .platform_data = &gpmc_smsc911x_fixed_reg_data, + }, +}; + /* * Initialize smsc911x device connected to the GPMC. Note that we * assume that pin multiplexing is done in the board-*.c file, @@ -55,6 +101,12 @@ void __init gpmc_smsc911x_init(struct omap_smsc911x_platform_data *board_data) gpmc_cfg = board_data; + ret = platform_device_register(&gpmc_smsc911x_regulator); + if (ret < 0) { + pr_err("Unable to register smsc911x regulators: %d\n", ret); + return; + } + if (gpmc_cs_request(gpmc_cfg->cs, SZ_16M, &cs_mem_base) < 0) { pr_err("Failed to request GPMC mem region\n"); return; diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c index b40c2889529..19dd1657245 100644 --- a/arch/arm/mach-omap2/hsmmc.c +++ b/arch/arm/mach-omap2/hsmmc.c @@ -428,6 +428,7 @@ static int omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c, return 0; } +static int omap_hsmmc_done; #define MAX_OMAP_MMC_HWMOD_NAME_LEN 16 void omap_init_hsmmc(struct omap2_hsmmc_info *hsmmcinfo, int ctrl_nr) @@ -491,6 +492,11 @@ void omap2_hsmmc_init(struct omap2_hsmmc_info *controllers) { u32 reg; + if (omap_hsmmc_done) + return; + + omap_hsmmc_done = 1; + if (!cpu_is_omap44xx()) { if (cpu_is_omap2430()) { control_pbias_offset = OMAP243X_CONTROL_PBIAS_LITE; diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c index 6c5826605ea..719ee423abe 100644 --- a/arch/arm/mach-omap2/id.c +++ b/arch/arm/mach-omap2/id.c @@ -343,6 +343,7 @@ static void __init omap3_check_revision(const char **cpu_rev) case 0xb944: omap_revision = AM335X_REV_ES1_0; *cpu_rev = "1.0"; + break; case 0xb8f2: switch (rev) { case 0: diff --git a/arch/arm/mach-omap2/include/mach/system.h b/arch/arm/mach-omap2/include/mach/system.h deleted file mode 100644 index d488721ab90..00000000000 --- a/arch/arm/mach-omap2/include/mach/system.h +++ /dev/null @@ -1,5 +0,0 @@ -/* - * arch/arm/mach-omap2/include/mach/system.h - */ - -#include <plat/system.h> diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index eb50c29fb64..fb11b44fbde 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -307,6 +307,7 @@ void __init omapam33xx_map_common_io(void) void __init omap44xx_map_common_io(void) { iotable_init(omap44xx_io_desc, ARRAY_SIZE(omap44xx_io_desc)); + omap_barriers_init(); } #endif diff --git a/arch/arm/mach-omap2/mailbox.c b/arch/arm/mach-omap2/mailbox.c index 609ea2ded7e..415a6f1cf41 100644 --- a/arch/arm/mach-omap2/mailbox.c +++ b/arch/arm/mach-omap2/mailbox.c @@ -281,8 +281,16 @@ static struct omap_mbox mbox_iva_info = { .ops = &omap2_mbox_ops, .priv = &omap2_mbox_iva_priv, }; +#endif -struct omap_mbox *omap2_mboxes[] = { &mbox_dsp_info, &mbox_iva_info, NULL }; +#ifdef CONFIG_ARCH_OMAP2 +struct omap_mbox *omap2_mboxes[] = { + &mbox_dsp_info, +#ifdef CONFIG_SOC_OMAP2420 + &mbox_iva_info, +#endif + NULL +}; #endif #if defined(CONFIG_ARCH_OMAP4) diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c index fb8bc9fa43b..611a0e3d54c 100644 --- a/arch/arm/mach-omap2/mux.c +++ b/arch/arm/mach-omap2/mux.c @@ -218,7 +218,7 @@ static int _omap_mux_get_by_name(struct omap_mux_partition *partition, return -ENODEV; } -static int __init +static int omap_mux_get_by_name(const char *muxname, struct omap_mux_partition **found_partition, struct omap_mux **found_mux) diff --git a/arch/arm/mach-omap2/omap-iommu.c b/arch/arm/mach-omap2/omap-iommu.c index b8822048e40..ac49384d028 100644 --- a/arch/arm/mach-omap2/omap-iommu.c +++ b/arch/arm/mach-omap2/omap-iommu.c @@ -150,7 +150,8 @@ err_out: platform_device_put(omap_iommu_pdev[i]); return err; } -module_init(omap_iommu_init); +/* must be ready before omap3isp is probed */ +subsys_initcall(omap_iommu_init); static void __exit omap_iommu_exit(void) { diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c index 40a8fbc07e4..70de277f5c1 100644 --- a/arch/arm/mach-omap2/omap4-common.c +++ b/arch/arm/mach-omap2/omap4-common.c @@ -24,12 +24,14 @@ #include <plat/irqs.h> #include <plat/sram.h> +#include <plat/omap-secure.h> #include <mach/hardware.h> #include <mach/omap-wakeupgen.h> #include "common.h" #include "omap4-sar-layout.h" +#include <linux/export.h> #ifdef CONFIG_CACHE_L2X0 static void __iomem *l2cache_base; @@ -43,6 +45,9 @@ static void __iomem *sar_ram_base; void __iomem *dram_sync, *sram_sync; +static phys_addr_t paddr; +static u32 size; + void omap_bus_sync(void) { if (dram_sync && sram_sync) { @@ -51,19 +56,22 @@ void omap_bus_sync(void) isb(); } } +EXPORT_SYMBOL(omap_bus_sync); -static int __init omap_barriers_init(void) +/* Steal one page physical memory for barrier implementation */ +int __init omap_barrier_reserve_memblock(void) { - struct map_desc dram_io_desc[1]; - phys_addr_t paddr; - u32 size; - - if (!cpu_is_omap44xx()) - return -ENODEV; size = ALIGN(PAGE_SIZE, SZ_1M); paddr = arm_memblock_steal(size, SZ_1M); + return 0; +} + +void __init omap_barriers_init(void) +{ + struct map_desc dram_io_desc[1]; + dram_io_desc[0].virtual = OMAP4_DRAM_BARRIER_VA; dram_io_desc[0].pfn = __phys_to_pfn(paddr); dram_io_desc[0].length = size; @@ -75,9 +83,10 @@ static int __init omap_barriers_init(void) pr_info("OMAP4: Map 0x%08llx to 0x%08lx for dram barrier\n", (long long) paddr, dram_io_desc[0].virtual); - return 0; } -core_initcall(omap_barriers_init); +#else +void __init omap_barriers_init(void) +{} #endif void __init gic_init_irq(void) diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c index 1881fe91514..5a65dd04aa3 100644 --- a/arch/arm/mach-omap2/pm.c +++ b/arch/arm/mach-omap2/pm.c @@ -174,14 +174,17 @@ static int __init omap2_set_init_voltage(char *vdd_name, char *clk_name, freq = clk->rate; clk_put(clk); + rcu_read_lock(); opp = opp_find_freq_ceil(dev, &freq); if (IS_ERR(opp)) { + rcu_read_unlock(); pr_err("%s: unable to find boot up OPP for vdd_%s\n", __func__, vdd_name); goto exit; } bootup_volt = opp_get_voltage(opp); + rcu_read_unlock(); if (!bootup_volt) { pr_err("%s: unable to find voltage corresponding " "to the bootup OPP for vdd_%s\n", __func__, vdd_name); diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c index 23de98d0384..a4eb5c28043 100644 --- a/arch/arm/mach-omap2/pm24xx.c +++ b/arch/arm/mach-omap2/pm24xx.c @@ -226,7 +226,6 @@ static int omap2_can_sleep(void) static void omap2_pm_idle(void) { - local_irq_disable(); local_fiq_disable(); if (!omap2_can_sleep()) { @@ -243,7 +242,6 @@ static void omap2_pm_idle(void) out: local_fiq_enable(); - local_irq_enable(); } #ifdef CONFIG_SUSPEND @@ -462,7 +460,7 @@ static int __init omap2_pm_init(void) } suspend_set_ops(&omap_pm_ops); - pm_idle = omap2_pm_idle; + arm_pm_idle = omap2_pm_idle; return 0; } diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index fc698757892..b77df735fa6 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -418,10 +418,9 @@ void omap_sram_idle(void) static void omap3_pm_idle(void) { - local_irq_disable(); local_fiq_disable(); - if (omap_irq_pending() || need_resched()) + if (omap_irq_pending()) goto out; trace_power_start(POWER_CSTATE, 1, smp_processor_id()); @@ -434,7 +433,6 @@ static void omap3_pm_idle(void) out: local_fiq_enable(); - local_irq_enable(); } #ifdef CONFIG_SUSPEND @@ -848,7 +846,7 @@ static int __init omap3_pm_init(void) suspend_set_ops(&omap_pm_ops); #endif /* CONFIG_SUSPEND */ - pm_idle = omap3_pm_idle; + arm_pm_idle = omap3_pm_idle; omap3_idle_init(); /* diff --git a/arch/arm/mach-omap2/pm44xx.c b/arch/arm/mach-omap2/pm44xx.c index c264ef7219c..c840689df24 100644 --- a/arch/arm/mach-omap2/pm44xx.c +++ b/arch/arm/mach-omap2/pm44xx.c @@ -173,18 +173,16 @@ static int __init pwrdms_setup(struct powerdomain *pwrdm, void *unused) * omap_default_idle - OMAP4 default ilde routine.' * * Implements OMAP4 memory, IO ordering requirements which can't be addressed - * with default arch_idle() hook. Used by all CPUs with !CONFIG_CPUIDLE and + * with default cpu_do_idle() hook. Used by all CPUs with !CONFIG_CPUIDLE and * by secondary CPU with CONFIG_CPUIDLE. */ static void omap_default_idle(void) { - local_irq_disable(); local_fiq_disable(); omap_do_wfi(); local_fiq_enable(); - local_irq_enable(); } /** @@ -255,8 +253,8 @@ static int __init omap4_pm_init(void) suspend_set_ops(&omap_pm_ops); #endif /* CONFIG_SUSPEND */ - /* Overwrite the default arch_idle() */ - pm_idle = omap_default_idle; + /* Overwrite the default cpu_do_idle() */ + arm_pm_idle = omap_default_idle; omap4_idle_init(); diff --git a/arch/arm/mach-omap2/prm_common.c b/arch/arm/mach-omap2/prm_common.c index 860118ab43e..873b51d494e 100644 --- a/arch/arm/mach-omap2/prm_common.c +++ b/arch/arm/mach-omap2/prm_common.c @@ -24,7 +24,6 @@ #include <linux/interrupt.h> #include <linux/slab.h> -#include <mach/system.h> #include <plat/common.h> #include <plat/prcm.h> #include <plat/irqs.h> diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c index 10b20c652e5..4b57757bf9d 100644 --- a/arch/arm/mach-omap2/twl-common.c +++ b/arch/arm/mach-omap2/twl-common.c @@ -270,7 +270,6 @@ static struct regulator_init_data omap4_vusb_idata = { .constraints = { .min_uV = 3300000, .max_uV = 3300000, - .apply_uV = true, .valid_modes_mask = REGULATOR_MODE_NORMAL | REGULATOR_MODE_STANDBY, .valid_ops_mask = REGULATOR_CHANGE_MODE diff --git a/arch/arm/mach-omap2/usb-host.c b/arch/arm/mach-omap2/usb-host.c index 771dc781b74..f51348dafaf 100644 --- a/arch/arm/mach-omap2/usb-host.c +++ b/arch/arm/mach-omap2/usb-host.c @@ -486,7 +486,7 @@ static void setup_4430ohci_io_mux(const enum usbhs_omap_port_mode *port_mode) void __init usbhs_init(const struct usbhs_omap_board_data *pdata) { struct omap_hwmod *oh[2]; - struct omap_device *od; + struct platform_device *pdev; int bus_id = -1; int i; @@ -522,11 +522,11 @@ void __init usbhs_init(const struct usbhs_omap_board_data *pdata) return; } - od = omap_device_build_ss(OMAP_USBHS_DEVICE, bus_id, oh, 2, + pdev = omap_device_build_ss(OMAP_USBHS_DEVICE, bus_id, oh, 2, (void *)&usbhs_data, sizeof(usbhs_data), omap_uhhtll_latency, ARRAY_SIZE(omap_uhhtll_latency), false); - if (IS_ERR(od)) { + if (IS_ERR(pdev)) { pr_err("Could not build hwmod devices %s,%s\n", USBHS_UHH_HWMODNAME, USBHS_TLL_HWMODNAME); return; diff --git a/arch/arm/mach-omap2/voltagedomains3xxx_data.c b/arch/arm/mach-omap2/voltagedomains3xxx_data.c index c005e2f5e38..57db2038b23 100644 --- a/arch/arm/mach-omap2/voltagedomains3xxx_data.c +++ b/arch/arm/mach-omap2/voltagedomains3xxx_data.c @@ -108,6 +108,7 @@ void __init omap3xxx_voltagedomains_init(void) * XXX Will depend on the process, validation, and binning * for the currently-running IC */ +#ifdef CONFIG_PM_OPP if (cpu_is_omap3630()) { omap3_voltdm_mpu.volt_data = omap36xx_vddmpu_volt_data; omap3_voltdm_core.volt_data = omap36xx_vddcore_volt_data; @@ -115,6 +116,7 @@ void __init omap3xxx_voltagedomains_init(void) omap3_voltdm_mpu.volt_data = omap34xx_vddmpu_volt_data; omap3_voltdm_core.volt_data = omap34xx_vddcore_volt_data; } +#endif if (cpu_is_omap3517() || cpu_is_omap3505()) voltdms = voltagedomains_am35xx; diff --git a/arch/arm/mach-omap2/voltagedomains44xx_data.c b/arch/arm/mach-omap2/voltagedomains44xx_data.c index 4e11d022595..c3115f6853d 100644 --- a/arch/arm/mach-omap2/voltagedomains44xx_data.c +++ b/arch/arm/mach-omap2/voltagedomains44xx_data.c @@ -100,9 +100,11 @@ void __init omap44xx_voltagedomains_init(void) * XXX Will depend on the process, validation, and binning * for the currently-running IC */ +#ifdef CONFIG_PM_OPP omap4_voltdm_mpu.volt_data = omap44xx_vdd_mpu_volt_data; omap4_voltdm_iva.volt_data = omap44xx_vdd_iva_volt_data; omap4_voltdm_core.volt_data = omap44xx_vdd_core_volt_data; +#endif for (i = 0; voltdm = voltagedomains_omap4[i], voltdm; i++) voltdm->sys_clk.name = sys_clk_name; diff --git a/arch/arm/mach-orion5x/include/mach/system.h b/arch/arm/mach-orion5x/include/mach/system.h deleted file mode 100644 index 825a2650cef..00000000000 --- a/arch/arm/mach-orion5x/include/mach/system.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * arch/arm/mach-orion5x/include/mach/system.h - * - * Tzachi Perelstein <tzachi@marvell.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H - -static inline void arch_idle(void) -{ - cpu_do_idle(); -} - -#endif diff --git a/arch/arm/mach-picoxcell/include/mach/system.h b/arch/arm/mach-picoxcell/include/mach/system.h deleted file mode 100644 index 1a5d8cb57df..00000000000 --- a/arch/arm/mach-picoxcell/include/mach/system.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * Copyright (c) 2011 Picochip Ltd., Jamie Iles - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H - -static inline void arch_idle(void) -{ - /* - * This should do all the clock switching and wait for interrupt - * tricks. - */ - cpu_do_idle(); -} - -#endif /* __ASM_ARCH_SYSTEM_H */ diff --git a/arch/arm/mach-pnx4008/include/mach/system.h b/arch/arm/mach-pnx4008/include/mach/system.h deleted file mode 100644 index 60cfe718809..00000000000 --- a/arch/arm/mach-pnx4008/include/mach/system.h +++ /dev/null @@ -1,29 +0,0 @@ -/* - * arch/arm/mach-pnx4008/include/mach/system.h - * - * Copyright (C) 2003 Philips Semiconductors - * Copyright (C) 2005 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H - -static void arch_idle(void) -{ - cpu_do_idle(); -} - -#endif diff --git a/arch/arm/mach-prima2/include/mach/system.h b/arch/arm/mach-prima2/include/mach/system.h deleted file mode 100644 index 2c7d2a9d0c9..00000000000 --- a/arch/arm/mach-prima2/include/mach/system.h +++ /dev/null @@ -1,17 +0,0 @@ -/* - * arch/arm/mach-prima2/include/mach/system.h - * - * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company. - * - * Licensed under GPLv2 or later. - */ - -#ifndef __MACH_SYSTEM_H__ -#define __MACH_SYSTEM_H__ - -static inline void arch_idle(void) -{ - cpu_do_idle(); -} - -#endif diff --git a/arch/arm/mach-pxa/generic.h b/arch/arm/mach-pxa/generic.h index 0d729e6619d..42d5cca6625 100644 --- a/arch/arm/mach-pxa/generic.h +++ b/arch/arm/mach-pxa/generic.h @@ -49,7 +49,6 @@ extern unsigned pxa3xx_get_clk_frequency_khz(int); #endif extern struct syscore_ops pxa_irq_syscore_ops; -extern struct syscore_ops pxa_gpio_syscore_ops; extern struct syscore_ops pxa2xx_mfp_syscore_ops; extern struct syscore_ops pxa3xx_mfp_syscore_ops; diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c index fb9b62dcf4c..f309bf97520 100644 --- a/arch/arm/mach-pxa/hx4700.c +++ b/arch/arm/mach-pxa/hx4700.c @@ -45,6 +45,7 @@ #include <mach/hx4700.h> #include <mach/irda.h> +#include <sound/ak4641.h> #include <video/platform_lcd.h> #include <video/w100fb.h> @@ -96,9 +97,9 @@ static unsigned long hx4700_pin_config[] __initdata = { /* BTUART */ GPIO42_BTUART_RXD, - GPIO43_BTUART_TXD, + GPIO43_BTUART_TXD_LPM_LOW, GPIO44_BTUART_CTS, - GPIO45_BTUART_RTS, + GPIO45_BTUART_RTS_LPM_LOW, /* PWM 1 (Backlight) */ GPIO17_PWM1_OUT, @@ -244,6 +245,21 @@ static u16 asic3_gpio_config[] = { ASIC3_GPIOD15_nPIOW, }; +static struct asic3_led asic3_leds[ASIC3_NUM_LEDS] = { + [0] = { + .name = "hx4700:amber", + .default_trigger = "ds2760-battery.0-charging-blink-full-solid", + }, + [1] = { + .name = "hx4700:green", + .default_trigger = "unused", + }, + [2] = { + .name = "hx4700:blue", + .default_trigger = "hx4700-radio", + }, +}; + static struct resource asic3_resources[] = { /* GPIO part */ [0] = { @@ -274,6 +290,7 @@ static struct asic3_platform_data asic3_platform_data = { .gpio_config_num = ARRAY_SIZE(asic3_gpio_config), .irq_base = IRQ_BOARD_START, .gpio_base = HX4700_ASIC3_GPIO_BASE, + .leds = asic3_leds, }; static struct platform_device asic3 = { @@ -704,10 +721,9 @@ static void hx4700_set_vpp(struct platform_device *pdev, int vpp) gpio_set_value(GPIO91_HX4700_FLASH_VPEN, vpp); } -static struct resource strataflash_resource = { - .start = PXA_CS0_PHYS, - .end = PXA_CS0_PHYS + SZ_128M - 1, - .flags = IORESOURCE_MEM, +static struct resource strataflash_resource[] = { + [0] = DEFINE_RES_MEM(PXA_CS0_PHYS, SZ_64M), + [1] = DEFINE_RES_MEM(PXA_CS0_PHYS + SZ_64M, SZ_64M), }; static struct physmap_flash_data strataflash_data = { @@ -718,8 +734,8 @@ static struct physmap_flash_data strataflash_data = { static struct platform_device strataflash = { .name = "physmap-flash", .id = -1, - .resource = &strataflash_resource, - .num_resources = 1, + .resource = strataflash_resource, + .num_resources = ARRAY_SIZE(strataflash_resource), .dev = { .platform_data = &strataflash_data, }, @@ -765,16 +781,27 @@ static struct i2c_board_info __initdata pi2c_board_info[] = { }; /* - * PCMCIA + * Asahi Kasei AK4641 on I2C */ -static struct platform_device pcmcia = { - .name = "hx4700-pcmcia", - .dev = { - .parent = &asic3.dev, +static struct ak4641_platform_data ak4641_info = { + .gpio_power = GPIO27_HX4700_CODEC_ON, + .gpio_npdn = GPIO109_HX4700_CODEC_nPDN, +}; + +static struct i2c_board_info i2c_board_info[] __initdata = { + { + I2C_BOARD_INFO("ak4641", 0x12), + .platform_data = &ak4641_info, }, }; +static struct platform_device audio = { + .name = "hx4700-audio", + .id = -1, +}; + + /* * Platform devices */ @@ -790,7 +817,7 @@ static struct platform_device *devices[] __initdata = { &gpio_vbus, &power_supply, &strataflash, - &pcmcia, + &audio, }; static struct gpio global_gpios[] = { @@ -806,7 +833,6 @@ static struct gpio global_gpios[] = { { GPIO32_HX4700_RS232_ON, GPIOF_OUT_INIT_HIGH, "RS232_ON" }, { GPIO71_HX4700_ASIC3_nRESET, GPIOF_OUT_INIT_HIGH, "ASIC3_nRESET" }, { GPIO82_HX4700_EUART_RESET, GPIOF_OUT_INIT_HIGH, "EUART_RESET" }, - { GPIO105_HX4700_nIR_ON, GPIOF_OUT_INIT_HIGH, "nIR_EN" }, }; static void __init hx4700_init(void) @@ -827,6 +853,7 @@ static void __init hx4700_init(void) pxa_set_ficp_info(&ficp_info); pxa27x_set_i2c_power_info(NULL); pxa_set_i2c_info(NULL); + i2c_register_board_info(0, ARRAY_AND_SIZE(i2c_board_info)); i2c_register_board_info(1, ARRAY_AND_SIZE(pi2c_board_info)); pxa2xx_set_spi_info(2, &pxa_ssp2_master_info); spi_register_board_info(ARRAY_AND_SIZE(tsc2046_board_info)); diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h b/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h index ec0f0b0b674..a65867209aa 100644 --- a/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h +++ b/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h @@ -158,7 +158,9 @@ #define GPIO44_BTUART_CTS MFP_CFG_IN(GPIO44, AF1) #define GPIO42_BTUART_RXD MFP_CFG_IN(GPIO42, AF1) #define GPIO45_BTUART_RTS MFP_CFG_OUT(GPIO45, AF2, DRIVE_HIGH) +#define GPIO45_BTUART_RTS_LPM_LOW MFP_CFG_OUT(GPIO45, AF2, DRIVE_LOW) #define GPIO43_BTUART_TXD MFP_CFG_OUT(GPIO43, AF2, DRIVE_HIGH) +#define GPIO43_BTUART_TXD_LPM_LOW MFP_CFG_OUT(GPIO43, AF2, DRIVE_LOW) /* STUART */ #define GPIO46_STUART_RXD MFP_CFG_IN(GPIO46, AF2) diff --git a/arch/arm/mach-pxa/include/mach/system.h b/arch/arm/mach-pxa/include/mach/system.h deleted file mode 100644 index c5afacd3cc0..00000000000 --- a/arch/arm/mach-pxa/include/mach/system.h +++ /dev/null @@ -1,15 +0,0 @@ -/* - * arch/arm/mach-pxa/include/mach/system.h - * - * Author: Nicolas Pitre - * Created: Jun 15, 2001 - * Copyright: MontaVista Software Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -static inline void arch_idle(void) -{ - cpu_do_idle(); -} diff --git a/arch/arm/mach-pxa/mfp-pxa2xx.c b/arch/arm/mach-pxa/mfp-pxa2xx.c index f14775536b8..29b62afc6f7 100644 --- a/arch/arm/mach-pxa/mfp-pxa2xx.c +++ b/arch/arm/mach-pxa/mfp-pxa2xx.c @@ -226,6 +226,12 @@ static void __init pxa25x_mfp_init(void) { int i; + /* running before pxa_gpio_probe() */ +#ifdef CONFIG_CPU_PXA26x + pxa_last_gpio = 89; +#else + pxa_last_gpio = 84; +#endif for (i = 0; i <= pxa_last_gpio; i++) gpio_desc[i].valid = 1; @@ -295,6 +301,7 @@ static void __init pxa27x_mfp_init(void) { int i, gpio; + pxa_last_gpio = 120; /* running before pxa_gpio_probe() */ for (i = 0; i <= pxa_last_gpio; i++) { /* skip GPIO2, 5, 6, 7, 8, they are not * valid pins allow configuration diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c index 91e4f6c0376..3352b37b60c 100644 --- a/arch/arm/mach-pxa/pxa25x.c +++ b/arch/arm/mach-pxa/pxa25x.c @@ -25,7 +25,6 @@ #include <linux/suspend.h> #include <linux/syscore_ops.h> #include <linux/irq.h> -#include <linux/gpio.h> #include <asm/mach/map.h> #include <asm/suspend.h> @@ -209,6 +208,7 @@ static struct clk_lookup pxa25x_clkregs[] = { INIT_CLKREG(&clk_pxa25x_gpio11, NULL, "GPIO11_CLK"), INIT_CLKREG(&clk_pxa25x_gpio12, NULL, "GPIO12_CLK"), INIT_CLKREG(&clk_pxa25x_mem, "pxa2xx-pcmcia", NULL), + INIT_CLKREG(&clk_dummy, "pxa-gpio", NULL), }; static struct clk_lookup pxa25x_hwuart_clkreg = @@ -368,7 +368,6 @@ static int __init pxa25x_init(void) register_syscore_ops(&pxa_irq_syscore_ops); register_syscore_ops(&pxa2xx_mfp_syscore_ops); - register_syscore_ops(&pxa_gpio_syscore_ops); register_syscore_ops(&pxa2xx_clock_syscore_ops); ret = platform_add_devices(pxa25x_devices, diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c index aed6cbcf386..6bce78edce7 100644 --- a/arch/arm/mach-pxa/pxa27x.c +++ b/arch/arm/mach-pxa/pxa27x.c @@ -22,7 +22,6 @@ #include <linux/io.h> #include <linux/irq.h> #include <linux/i2c/pxa-i2c.h> -#include <linux/gpio.h> #include <asm/mach/map.h> #include <mach/hardware.h> @@ -230,6 +229,7 @@ static struct clk_lookup pxa27x_clkregs[] = { INIT_CLKREG(&clk_pxa27x_im, NULL, "IMCLK"), INIT_CLKREG(&clk_pxa27x_memc, NULL, "MEMCLK"), INIT_CLKREG(&clk_pxa27x_mem, "pxa2xx-pcmcia", NULL), + INIT_CLKREG(&clk_dummy, "pxa-gpio", NULL), }; #ifdef CONFIG_PM @@ -456,7 +456,6 @@ static int __init pxa27x_init(void) register_syscore_ops(&pxa_irq_syscore_ops); register_syscore_ops(&pxa2xx_mfp_syscore_ops); - register_syscore_ops(&pxa_gpio_syscore_ops); register_syscore_ops(&pxa2xx_clock_syscore_ops); ret = platform_add_devices(devices, ARRAY_SIZE(devices)); diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c index 4f402afa660..3918a672238 100644 --- a/arch/arm/mach-pxa/pxa3xx.c +++ b/arch/arm/mach-pxa/pxa3xx.c @@ -462,7 +462,6 @@ static int __init pxa3xx_init(void) register_syscore_ops(&pxa_irq_syscore_ops); register_syscore_ops(&pxa3xx_mfp_syscore_ops); - register_syscore_ops(&pxa_gpio_syscore_ops); register_syscore_ops(&pxa3xx_clock_syscore_ops); ret = platform_add_devices(devices, ARRAY_SIZE(devices)); diff --git a/arch/arm/mach-pxa/pxa95x.c b/arch/arm/mach-pxa/pxa95x.c index d082a583df7..5ce434b95e8 100644 --- a/arch/arm/mach-pxa/pxa95x.c +++ b/arch/arm/mach-pxa/pxa95x.c @@ -283,7 +283,6 @@ static int __init pxa95x_init(void) return ret; register_syscore_ops(&pxa_irq_syscore_ops); - register_syscore_ops(&pxa_gpio_syscore_ops); register_syscore_ops(&pxa3xx_clock_syscore_ops); ret = platform_add_devices(devices, ARRAY_SIZE(devices)); diff --git a/arch/arm/mach-pxa/saarb.c b/arch/arm/mach-pxa/saarb.c index febc809ed5a..5aded5e6148 100644 --- a/arch/arm/mach-pxa/saarb.c +++ b/arch/arm/mach-pxa/saarb.c @@ -15,7 +15,6 @@ #include <linux/i2c.h> #include <linux/i2c/pxa-i2c.h> #include <linux/mfd/88pm860x.h> -#include <linux/gpio.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> diff --git a/arch/arm/mach-pxa/sharpsl_pm.c b/arch/arm/mach-pxa/sharpsl_pm.c index 8d5168d253a..30989baf7f2 100644 --- a/arch/arm/mach-pxa/sharpsl_pm.c +++ b/arch/arm/mach-pxa/sharpsl_pm.c @@ -168,6 +168,7 @@ struct battery_thresh sharpsl_battery_levels_noac[] = { #define MAXCTRL_SEL_SH 4 #define MAXCTRL_STR (1u << 7) +extern int max1111_read_channel(int); /* * Read MAX1111 ADC */ @@ -177,8 +178,6 @@ int sharpsl_pm_pxa_read_max1111(int channel) if (machine_is_tosa()) return 0; - extern int max1111_read_channel(int); - /* max1111 accepts channels from 0-3, however, * it is encoded from 0-7 here in the code. */ diff --git a/arch/arm/mach-pxa/spitz_pm.c b/arch/arm/mach-pxa/spitz_pm.c index 34cbdac5152..438f02fe122 100644 --- a/arch/arm/mach-pxa/spitz_pm.c +++ b/arch/arm/mach-pxa/spitz_pm.c @@ -172,10 +172,9 @@ static int spitz_should_wakeup(unsigned int resume_on_alarm) static unsigned long spitz_charger_wakeup(void) { unsigned long ret; - ret = (!gpio_get_value(SPITZ_GPIO_KEY_INT) + ret = ((!gpio_get_value(SPITZ_GPIO_KEY_INT) << GPIO_bit(SPITZ_GPIO_KEY_INT)) - | (!gpio_get_value(SPITZ_GPIO_SYNC) - << GPIO_bit(SPITZ_GPIO_SYNC)); + | gpio_get_value(SPITZ_GPIO_SYNC)); return ret; } diff --git a/arch/arm/mach-realview/core.h b/arch/arm/mach-realview/core.h index 735b57aaf2d..f8f2c0ac4c0 100644 --- a/arch/arm/mach-realview/core.h +++ b/arch/arm/mach-realview/core.h @@ -28,21 +28,11 @@ #include <asm/setup.h> #include <asm/leds.h> -#define AMBA_DEVICE(name,busid,base,plat) \ -static struct amba_device name##_device = { \ - .dev = { \ - .coherent_dma_mask = ~0, \ - .init_name = busid, \ - .platform_data = plat, \ - }, \ - .res = { \ - .start = REALVIEW_##base##_BASE, \ - .end = (REALVIEW_##base##_BASE) + SZ_4K - 1, \ - .flags = IORESOURCE_MEM, \ - }, \ - .dma_mask = ~0, \ - .irq = base##_IRQ, \ -} +#define APB_DEVICE(name, busid, base, plat) \ +static AMBA_APB_DEVICE(name, busid, 0, REALVIEW_##base##_BASE, base##_IRQ, plat) + +#define AHB_DEVICE(name, busid, base, plat) \ +static AMBA_AHB_DEVICE(name, busid, 0, REALVIEW_##base##_BASE, base##_IRQ, plat) struct machine_desc; diff --git a/arch/arm/mach-realview/include/mach/irqs-pb1176.h b/arch/arm/mach-realview/include/mach/irqs-pb1176.h index 5c3c625e3e0..708f84156f2 100644 --- a/arch/arm/mach-realview/include/mach/irqs-pb1176.h +++ b/arch/arm/mach-realview/include/mach/irqs-pb1176.h @@ -40,6 +40,7 @@ #define IRQ_DC1176_L2CC (IRQ_DC1176_GIC_START + 13) #define IRQ_DC1176_RTC (IRQ_DC1176_GIC_START + 14) #define IRQ_DC1176_CLCD (IRQ_DC1176_GIC_START + 15) /* CLCD controller */ +#define IRQ_DC1176_GPIO0 (IRQ_DC1176_GIC_START + 16) #define IRQ_DC1176_SSP (IRQ_DC1176_GIC_START + 17) /* SSP port */ #define IRQ_DC1176_UART0 (IRQ_DC1176_GIC_START + 18) /* UART 0 on development chip */ #define IRQ_DC1176_UART1 (IRQ_DC1176_GIC_START + 19) /* UART 1 on development chip */ @@ -73,7 +74,6 @@ #define IRQ_PB1176_DMAC (IRQ_PB1176_GIC_START + 24) /* DMA controller */ #define IRQ_PB1176_RTC (IRQ_PB1176_GIC_START + 25) /* Real Time Clock */ -#define IRQ_PB1176_GPIO0 -1 #define IRQ_PB1176_SCTL -1 #define NR_GIC_PB1176 2 diff --git a/arch/arm/mach-realview/include/mach/system.h b/arch/arm/mach-realview/include/mach/system.h deleted file mode 100644 index 471b671159c..00000000000 --- a/arch/arm/mach-realview/include/mach/system.h +++ /dev/null @@ -1,33 +0,0 @@ -/* - * arch/arm/mach-realview/include/mach/system.h - * - * Copyright (C) 2003 ARM Limited - * Copyright (C) 2000 Deep Blue Solutions Ltd - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H - -static inline void arch_idle(void) -{ - /* - * This should do all the clock switching - * and wait for interrupt tricks - */ - cpu_do_idle(); -} - -#endif diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c index 9578145f2df..157e1bc6e83 100644 --- a/arch/arm/mach-realview/realview_eb.c +++ b/arch/arm/mach-realview/realview_eb.c @@ -135,63 +135,63 @@ static struct pl022_ssp_controller ssp0_plat_data = { /* * These devices are connected via the core APB bridge */ -#define GPIO2_IRQ { IRQ_EB_GPIO2, NO_IRQ } -#define GPIO3_IRQ { IRQ_EB_GPIO3, NO_IRQ } +#define GPIO2_IRQ { IRQ_EB_GPIO2 } +#define GPIO3_IRQ { IRQ_EB_GPIO3 } -#define AACI_IRQ { IRQ_EB_AACI, NO_IRQ } +#define AACI_IRQ { IRQ_EB_AACI } #define MMCI0_IRQ { IRQ_EB_MMCI0A, IRQ_EB_MMCI0B } -#define KMI0_IRQ { IRQ_EB_KMI0, NO_IRQ } -#define KMI1_IRQ { IRQ_EB_KMI1, NO_IRQ } +#define KMI0_IRQ { IRQ_EB_KMI0 } +#define KMI1_IRQ { IRQ_EB_KMI1 } /* * These devices are connected directly to the multi-layer AHB switch */ -#define EB_SMC_IRQ { NO_IRQ, NO_IRQ } -#define MPMC_IRQ { NO_IRQ, NO_IRQ } -#define EB_CLCD_IRQ { IRQ_EB_CLCD, NO_IRQ } -#define DMAC_IRQ { IRQ_EB_DMA, NO_IRQ } +#define EB_SMC_IRQ { } +#define MPMC_IRQ { } +#define EB_CLCD_IRQ { IRQ_EB_CLCD } +#define DMAC_IRQ { IRQ_EB_DMA } /* * These devices are connected via the core APB bridge */ -#define SCTL_IRQ { NO_IRQ, NO_IRQ } -#define EB_WATCHDOG_IRQ { IRQ_EB_WDOG, NO_IRQ } -#define EB_GPIO0_IRQ { IRQ_EB_GPIO0, NO_IRQ } -#define GPIO1_IRQ { IRQ_EB_GPIO1, NO_IRQ } -#define EB_RTC_IRQ { IRQ_EB_RTC, NO_IRQ } +#define SCTL_IRQ { } +#define EB_WATCHDOG_IRQ { IRQ_EB_WDOG } +#define EB_GPIO0_IRQ { IRQ_EB_GPIO0 } +#define GPIO1_IRQ { IRQ_EB_GPIO1 } +#define EB_RTC_IRQ { IRQ_EB_RTC } /* * These devices are connected via the DMA APB bridge */ -#define SCI_IRQ { IRQ_EB_SCI, NO_IRQ } -#define EB_UART0_IRQ { IRQ_EB_UART0, NO_IRQ } -#define EB_UART1_IRQ { IRQ_EB_UART1, NO_IRQ } -#define EB_UART2_IRQ { IRQ_EB_UART2, NO_IRQ } -#define EB_UART3_IRQ { IRQ_EB_UART3, NO_IRQ } -#define EB_SSP_IRQ { IRQ_EB_SSP, NO_IRQ } +#define SCI_IRQ { IRQ_EB_SCI } +#define EB_UART0_IRQ { IRQ_EB_UART0 } +#define EB_UART1_IRQ { IRQ_EB_UART1 } +#define EB_UART2_IRQ { IRQ_EB_UART2 } +#define EB_UART3_IRQ { IRQ_EB_UART3 } +#define EB_SSP_IRQ { IRQ_EB_SSP } /* FPGA Primecells */ -AMBA_DEVICE(aaci, "fpga:aaci", AACI, NULL); -AMBA_DEVICE(mmc0, "fpga:mmc0", MMCI0, &realview_mmc0_plat_data); -AMBA_DEVICE(kmi0, "fpga:kmi0", KMI0, NULL); -AMBA_DEVICE(kmi1, "fpga:kmi1", KMI1, NULL); -AMBA_DEVICE(uart3, "fpga:uart3", EB_UART3, NULL); +APB_DEVICE(aaci, "fpga:aaci", AACI, NULL); +APB_DEVICE(mmc0, "fpga:mmc0", MMCI0, &realview_mmc0_plat_data); +APB_DEVICE(kmi0, "fpga:kmi0", KMI0, NULL); +APB_DEVICE(kmi1, "fpga:kmi1", KMI1, NULL); +APB_DEVICE(uart3, "fpga:uart3", EB_UART3, NULL); /* DevChip Primecells */ -AMBA_DEVICE(smc, "dev:smc", EB_SMC, NULL); -AMBA_DEVICE(clcd, "dev:clcd", EB_CLCD, &clcd_plat_data); -AMBA_DEVICE(dmac, "dev:dmac", DMAC, NULL); -AMBA_DEVICE(sctl, "dev:sctl", SCTL, NULL); -AMBA_DEVICE(wdog, "dev:wdog", EB_WATCHDOG, NULL); -AMBA_DEVICE(gpio0, "dev:gpio0", EB_GPIO0, &gpio0_plat_data); -AMBA_DEVICE(gpio1, "dev:gpio1", GPIO1, &gpio1_plat_data); -AMBA_DEVICE(gpio2, "dev:gpio2", GPIO2, &gpio2_plat_data); -AMBA_DEVICE(rtc, "dev:rtc", EB_RTC, NULL); -AMBA_DEVICE(sci0, "dev:sci0", SCI, NULL); -AMBA_DEVICE(uart0, "dev:uart0", EB_UART0, NULL); -AMBA_DEVICE(uart1, "dev:uart1", EB_UART1, NULL); -AMBA_DEVICE(uart2, "dev:uart2", EB_UART2, NULL); -AMBA_DEVICE(ssp0, "dev:ssp0", EB_SSP, &ssp0_plat_data); +AHB_DEVICE(smc, "dev:smc", EB_SMC, NULL); +AHB_DEVICE(clcd, "dev:clcd", EB_CLCD, &clcd_plat_data); +AHB_DEVICE(dmac, "dev:dmac", DMAC, NULL); +AHB_DEVICE(sctl, "dev:sctl", SCTL, NULL); +APB_DEVICE(wdog, "dev:wdog", EB_WATCHDOG, NULL); +APB_DEVICE(gpio0, "dev:gpio0", EB_GPIO0, &gpio0_plat_data); +APB_DEVICE(gpio1, "dev:gpio1", GPIO1, &gpio1_plat_data); +APB_DEVICE(gpio2, "dev:gpio2", GPIO2, &gpio2_plat_data); +APB_DEVICE(rtc, "dev:rtc", EB_RTC, NULL); +APB_DEVICE(sci0, "dev:sci0", SCI, NULL); +APB_DEVICE(uart0, "dev:uart0", EB_UART0, NULL); +APB_DEVICE(uart1, "dev:uart1", EB_UART1, NULL); +APB_DEVICE(uart2, "dev:uart2", EB_UART2, NULL); +APB_DEVICE(ssp0, "dev:ssp0", EB_SSP, &ssp0_plat_data); static struct amba_device *amba_devs[] __initdata = { &dmac_device, diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c index e4abe94fb11..b1d7cafa1a6 100644 --- a/arch/arm/mach-realview/realview_pb1176.c +++ b/arch/arm/mach-realview/realview_pb1176.c @@ -132,50 +132,50 @@ static struct pl022_ssp_controller ssp0_plat_data = { /* * RealView PB1176 AMBA devices */ -#define GPIO2_IRQ { IRQ_PB1176_GPIO2, NO_IRQ } -#define GPIO3_IRQ { IRQ_PB1176_GPIO3, NO_IRQ } -#define AACI_IRQ { IRQ_PB1176_AACI, NO_IRQ } +#define GPIO2_IRQ { IRQ_PB1176_GPIO2 } +#define GPIO3_IRQ { IRQ_PB1176_GPIO3 } +#define AACI_IRQ { IRQ_PB1176_AACI } #define MMCI0_IRQ { IRQ_PB1176_MMCI0A, IRQ_PB1176_MMCI0B } -#define KMI0_IRQ { IRQ_PB1176_KMI0, NO_IRQ } -#define KMI1_IRQ { IRQ_PB1176_KMI1, NO_IRQ } -#define PB1176_SMC_IRQ { NO_IRQ, NO_IRQ } -#define MPMC_IRQ { NO_IRQ, NO_IRQ } -#define PB1176_CLCD_IRQ { IRQ_DC1176_CLCD, NO_IRQ } -#define SCTL_IRQ { NO_IRQ, NO_IRQ } -#define PB1176_WATCHDOG_IRQ { IRQ_DC1176_WATCHDOG, NO_IRQ } -#define PB1176_GPIO0_IRQ { IRQ_PB1176_GPIO0, NO_IRQ } -#define GPIO1_IRQ { IRQ_PB1176_GPIO1, NO_IRQ } -#define PB1176_RTC_IRQ { IRQ_DC1176_RTC, NO_IRQ } -#define SCI_IRQ { IRQ_PB1176_SCI, NO_IRQ } -#define PB1176_UART0_IRQ { IRQ_DC1176_UART0, NO_IRQ } -#define PB1176_UART1_IRQ { IRQ_DC1176_UART1, NO_IRQ } -#define PB1176_UART2_IRQ { IRQ_DC1176_UART2, NO_IRQ } -#define PB1176_UART3_IRQ { IRQ_DC1176_UART3, NO_IRQ } -#define PB1176_UART4_IRQ { IRQ_PB1176_UART4, NO_IRQ } -#define PB1176_SSP_IRQ { IRQ_DC1176_SSP, NO_IRQ } +#define KMI0_IRQ { IRQ_PB1176_KMI0 } +#define KMI1_IRQ { IRQ_PB1176_KMI1 } +#define PB1176_SMC_IRQ { } +#define MPMC_IRQ { } +#define PB1176_CLCD_IRQ { IRQ_DC1176_CLCD } +#define SCTL_IRQ { } +#define PB1176_WATCHDOG_IRQ { IRQ_DC1176_WATCHDOG } +#define PB1176_GPIO0_IRQ { IRQ_DC1176_GPIO0 } +#define GPIO1_IRQ { IRQ_PB1176_GPIO1 } +#define PB1176_RTC_IRQ { IRQ_DC1176_RTC } +#define SCI_IRQ { IRQ_PB1176_SCI } +#define PB1176_UART0_IRQ { IRQ_DC1176_UART0 } +#define PB1176_UART1_IRQ { IRQ_DC1176_UART1 } +#define PB1176_UART2_IRQ { IRQ_DC1176_UART2 } +#define PB1176_UART3_IRQ { IRQ_DC1176_UART3 } +#define PB1176_UART4_IRQ { IRQ_PB1176_UART4 } +#define PB1176_SSP_IRQ { IRQ_DC1176_SSP } /* FPGA Primecells */ -AMBA_DEVICE(aaci, "fpga:aaci", AACI, NULL); -AMBA_DEVICE(mmc0, "fpga:mmc0", MMCI0, &realview_mmc0_plat_data); -AMBA_DEVICE(kmi0, "fpga:kmi0", KMI0, NULL); -AMBA_DEVICE(kmi1, "fpga:kmi1", KMI1, NULL); -AMBA_DEVICE(uart4, "fpga:uart4", PB1176_UART4, NULL); +APB_DEVICE(aaci, "fpga:aaci", AACI, NULL); +APB_DEVICE(mmc0, "fpga:mmc0", MMCI0, &realview_mmc0_plat_data); +APB_DEVICE(kmi0, "fpga:kmi0", KMI0, NULL); +APB_DEVICE(kmi1, "fpga:kmi1", KMI1, NULL); +APB_DEVICE(uart4, "fpga:uart4", PB1176_UART4, NULL); /* DevChip Primecells */ -AMBA_DEVICE(smc, "dev:smc", PB1176_SMC, NULL); -AMBA_DEVICE(sctl, "dev:sctl", SCTL, NULL); -AMBA_DEVICE(wdog, "dev:wdog", PB1176_WATCHDOG, NULL); -AMBA_DEVICE(gpio0, "dev:gpio0", PB1176_GPIO0, &gpio0_plat_data); -AMBA_DEVICE(gpio1, "dev:gpio1", GPIO1, &gpio1_plat_data); -AMBA_DEVICE(gpio2, "dev:gpio2", GPIO2, &gpio2_plat_data); -AMBA_DEVICE(rtc, "dev:rtc", PB1176_RTC, NULL); -AMBA_DEVICE(sci0, "dev:sci0", SCI, NULL); -AMBA_DEVICE(uart0, "dev:uart0", PB1176_UART0, NULL); -AMBA_DEVICE(uart1, "dev:uart1", PB1176_UART1, NULL); -AMBA_DEVICE(uart2, "dev:uart2", PB1176_UART2, NULL); -AMBA_DEVICE(uart3, "dev:uart3", PB1176_UART3, NULL); -AMBA_DEVICE(ssp0, "dev:ssp0", PB1176_SSP, &ssp0_plat_data); -AMBA_DEVICE(clcd, "dev:clcd", PB1176_CLCD, &clcd_plat_data); +AHB_DEVICE(smc, "dev:smc", PB1176_SMC, NULL); +AHB_DEVICE(sctl, "dev:sctl", SCTL, NULL); +APB_DEVICE(wdog, "dev:wdog", PB1176_WATCHDOG, NULL); +APB_DEVICE(gpio0, "dev:gpio0", PB1176_GPIO0, &gpio0_plat_data); +APB_DEVICE(gpio1, "dev:gpio1", GPIO1, &gpio1_plat_data); +APB_DEVICE(gpio2, "dev:gpio2", GPIO2, &gpio2_plat_data); +APB_DEVICE(rtc, "dev:rtc", PB1176_RTC, NULL); +APB_DEVICE(sci0, "dev:sci0", SCI, NULL); +APB_DEVICE(uart0, "dev:uart0", PB1176_UART0, NULL); +APB_DEVICE(uart1, "dev:uart1", PB1176_UART1, NULL); +APB_DEVICE(uart2, "dev:uart2", PB1176_UART2, NULL); +APB_DEVICE(uart3, "dev:uart3", PB1176_UART3, NULL); +APB_DEVICE(ssp0, "dev:ssp0", PB1176_SSP, &ssp0_plat_data); +AHB_DEVICE(clcd, "dev:clcd", PB1176_CLCD, &clcd_plat_data); static struct amba_device *amba_devs[] __initdata = { &uart0_device, diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c index 2147335f66f..ae7fe54f6eb 100644 --- a/arch/arm/mach-realview/realview_pb11mp.c +++ b/arch/arm/mach-realview/realview_pb11mp.c @@ -127,52 +127,52 @@ static struct pl022_ssp_controller ssp0_plat_data = { * RealView PB11MPCore AMBA devices */ -#define GPIO2_IRQ { IRQ_PB11MP_GPIO2, NO_IRQ } -#define GPIO3_IRQ { IRQ_PB11MP_GPIO3, NO_IRQ } -#define AACI_IRQ { IRQ_TC11MP_AACI, NO_IRQ } +#define GPIO2_IRQ { IRQ_PB11MP_GPIO2 } +#define GPIO3_IRQ { IRQ_PB11MP_GPIO3 } +#define AACI_IRQ { IRQ_TC11MP_AACI } #define MMCI0_IRQ { IRQ_TC11MP_MMCI0A, IRQ_TC11MP_MMCI0B } -#define KMI0_IRQ { IRQ_TC11MP_KMI0, NO_IRQ } -#define KMI1_IRQ { IRQ_TC11MP_KMI1, NO_IRQ } -#define PB11MP_SMC_IRQ { NO_IRQ, NO_IRQ } -#define MPMC_IRQ { NO_IRQ, NO_IRQ } -#define PB11MP_CLCD_IRQ { IRQ_PB11MP_CLCD, NO_IRQ } -#define DMAC_IRQ { IRQ_PB11MP_DMAC, NO_IRQ } -#define SCTL_IRQ { NO_IRQ, NO_IRQ } -#define PB11MP_WATCHDOG_IRQ { IRQ_PB11MP_WATCHDOG, NO_IRQ } -#define PB11MP_GPIO0_IRQ { IRQ_PB11MP_GPIO0, NO_IRQ } -#define GPIO1_IRQ { IRQ_PB11MP_GPIO1, NO_IRQ } -#define PB11MP_RTC_IRQ { IRQ_TC11MP_RTC, NO_IRQ } -#define SCI_IRQ { IRQ_PB11MP_SCI, NO_IRQ } -#define PB11MP_UART0_IRQ { IRQ_TC11MP_UART0, NO_IRQ } -#define PB11MP_UART1_IRQ { IRQ_TC11MP_UART1, NO_IRQ } -#define PB11MP_UART2_IRQ { IRQ_PB11MP_UART2, NO_IRQ } -#define PB11MP_UART3_IRQ { IRQ_PB11MP_UART3, NO_IRQ } -#define PB11MP_SSP_IRQ { IRQ_PB11MP_SSP, NO_IRQ } +#define KMI0_IRQ { IRQ_TC11MP_KMI0 } +#define KMI1_IRQ { IRQ_TC11MP_KMI1 } +#define PB11MP_SMC_IRQ { } +#define MPMC_IRQ { } +#define PB11MP_CLCD_IRQ { IRQ_PB11MP_CLCD } +#define DMAC_IRQ { IRQ_PB11MP_DMAC } +#define SCTL_IRQ { } +#define PB11MP_WATCHDOG_IRQ { IRQ_PB11MP_WATCHDOG } +#define PB11MP_GPIO0_IRQ { IRQ_PB11MP_GPIO0 } +#define GPIO1_IRQ { IRQ_PB11MP_GPIO1 } +#define PB11MP_RTC_IRQ { IRQ_TC11MP_RTC } +#define SCI_IRQ { IRQ_PB11MP_SCI } +#define PB11MP_UART0_IRQ { IRQ_TC11MP_UART0 } +#define PB11MP_UART1_IRQ { IRQ_TC11MP_UART1 } +#define PB11MP_UART2_IRQ { IRQ_PB11MP_UART2 } +#define PB11MP_UART3_IRQ { IRQ_PB11MP_UART3 } +#define PB11MP_SSP_IRQ { IRQ_PB11MP_SSP } /* FPGA Primecells */ -AMBA_DEVICE(aaci, "fpga:aaci", AACI, NULL); -AMBA_DEVICE(mmc0, "fpga:mmc0", MMCI0, &realview_mmc0_plat_data); -AMBA_DEVICE(kmi0, "fpga:kmi0", KMI0, NULL); -AMBA_DEVICE(kmi1, "fpga:kmi1", KMI1, NULL); -AMBA_DEVICE(uart3, "fpga:uart3", PB11MP_UART3, NULL); +APB_DEVICE(aaci, "fpga:aaci", AACI, NULL); +APB_DEVICE(mmc0, "fpga:mmc0", MMCI0, &realview_mmc0_plat_data); +APB_DEVICE(kmi0, "fpga:kmi0", KMI0, NULL); +APB_DEVICE(kmi1, "fpga:kmi1", KMI1, NULL); +APB_DEVICE(uart3, "fpga:uart3", PB11MP_UART3, NULL); /* DevChip Primecells */ -AMBA_DEVICE(smc, "dev:smc", PB11MP_SMC, NULL); -AMBA_DEVICE(sctl, "dev:sctl", SCTL, NULL); -AMBA_DEVICE(wdog, "dev:wdog", PB11MP_WATCHDOG, NULL); -AMBA_DEVICE(gpio0, "dev:gpio0", PB11MP_GPIO0, &gpio0_plat_data); -AMBA_DEVICE(gpio1, "dev:gpio1", GPIO1, &gpio1_plat_data); -AMBA_DEVICE(gpio2, "dev:gpio2", GPIO2, &gpio2_plat_data); -AMBA_DEVICE(rtc, "dev:rtc", PB11MP_RTC, NULL); -AMBA_DEVICE(sci0, "dev:sci0", SCI, NULL); -AMBA_DEVICE(uart0, "dev:uart0", PB11MP_UART0, NULL); -AMBA_DEVICE(uart1, "dev:uart1", PB11MP_UART1, NULL); -AMBA_DEVICE(uart2, "dev:uart2", PB11MP_UART2, NULL); -AMBA_DEVICE(ssp0, "dev:ssp0", PB11MP_SSP, &ssp0_plat_data); +AHB_DEVICE(smc, "dev:smc", PB11MP_SMC, NULL); +AHB_DEVICE(sctl, "dev:sctl", SCTL, NULL); +APB_DEVICE(wdog, "dev:wdog", PB11MP_WATCHDOG, NULL); +APB_DEVICE(gpio0, "dev:gpio0", PB11MP_GPIO0, &gpio0_plat_data); +APB_DEVICE(gpio1, "dev:gpio1", GPIO1, &gpio1_plat_data); +APB_DEVICE(gpio2, "dev:gpio2", GPIO2, &gpio2_plat_data); +APB_DEVICE(rtc, "dev:rtc", PB11MP_RTC, NULL); +APB_DEVICE(sci0, "dev:sci0", SCI, NULL); +APB_DEVICE(uart0, "dev:uart0", PB11MP_UART0, NULL); +APB_DEVICE(uart1, "dev:uart1", PB11MP_UART1, NULL); +APB_DEVICE(uart2, "dev:uart2", PB11MP_UART2, NULL); +APB_DEVICE(ssp0, "dev:ssp0", PB11MP_SSP, &ssp0_plat_data); /* Primecells on the NEC ISSP chip */ -AMBA_DEVICE(clcd, "issp:clcd", PB11MP_CLCD, &clcd_plat_data); -AMBA_DEVICE(dmac, "issp:dmac", DMAC, NULL); +AHB_DEVICE(clcd, "issp:clcd", PB11MP_CLCD, &clcd_plat_data); +AHB_DEVICE(dmac, "issp:dmac", DMAC, NULL); static struct amba_device *amba_devs[] __initdata = { &dmac_device, diff --git a/arch/arm/mach-realview/realview_pba8.c b/arch/arm/mach-realview/realview_pba8.c index 25b2e59296f..59650174e6e 100644 --- a/arch/arm/mach-realview/realview_pba8.c +++ b/arch/arm/mach-realview/realview_pba8.c @@ -122,52 +122,52 @@ static struct pl022_ssp_controller ssp0_plat_data = { * RealView PBA8Core AMBA devices */ -#define GPIO2_IRQ { IRQ_PBA8_GPIO2, NO_IRQ } -#define GPIO3_IRQ { IRQ_PBA8_GPIO3, NO_IRQ } -#define AACI_IRQ { IRQ_PBA8_AACI, NO_IRQ } +#define GPIO2_IRQ { IRQ_PBA8_GPIO2 } +#define GPIO3_IRQ { IRQ_PBA8_GPIO3 } +#define AACI_IRQ { IRQ_PBA8_AACI } #define MMCI0_IRQ { IRQ_PBA8_MMCI0A, IRQ_PBA8_MMCI0B } -#define KMI0_IRQ { IRQ_PBA8_KMI0, NO_IRQ } -#define KMI1_IRQ { IRQ_PBA8_KMI1, NO_IRQ } -#define PBA8_SMC_IRQ { NO_IRQ, NO_IRQ } -#define MPMC_IRQ { NO_IRQ, NO_IRQ } -#define PBA8_CLCD_IRQ { IRQ_PBA8_CLCD, NO_IRQ } -#define DMAC_IRQ { IRQ_PBA8_DMAC, NO_IRQ } -#define SCTL_IRQ { NO_IRQ, NO_IRQ } -#define PBA8_WATCHDOG_IRQ { IRQ_PBA8_WATCHDOG, NO_IRQ } -#define PBA8_GPIO0_IRQ { IRQ_PBA8_GPIO0, NO_IRQ } -#define GPIO1_IRQ { IRQ_PBA8_GPIO1, NO_IRQ } -#define PBA8_RTC_IRQ { IRQ_PBA8_RTC, NO_IRQ } -#define SCI_IRQ { IRQ_PBA8_SCI, NO_IRQ } -#define PBA8_UART0_IRQ { IRQ_PBA8_UART0, NO_IRQ } -#define PBA8_UART1_IRQ { IRQ_PBA8_UART1, NO_IRQ } -#define PBA8_UART2_IRQ { IRQ_PBA8_UART2, NO_IRQ } -#define PBA8_UART3_IRQ { IRQ_PBA8_UART3, NO_IRQ } -#define PBA8_SSP_IRQ { IRQ_PBA8_SSP, NO_IRQ } +#define KMI0_IRQ { IRQ_PBA8_KMI0 } +#define KMI1_IRQ { IRQ_PBA8_KMI1 } +#define PBA8_SMC_IRQ { } +#define MPMC_IRQ { } +#define PBA8_CLCD_IRQ { IRQ_PBA8_CLCD } +#define DMAC_IRQ { IRQ_PBA8_DMAC } +#define SCTL_IRQ { } +#define PBA8_WATCHDOG_IRQ { IRQ_PBA8_WATCHDOG } +#define PBA8_GPIO0_IRQ { IRQ_PBA8_GPIO0 } +#define GPIO1_IRQ { IRQ_PBA8_GPIO1 } +#define PBA8_RTC_IRQ { IRQ_PBA8_RTC } +#define SCI_IRQ { IRQ_PBA8_SCI } +#define PBA8_UART0_IRQ { IRQ_PBA8_UART0 } +#define PBA8_UART1_IRQ { IRQ_PBA8_UART1 } +#define PBA8_UART2_IRQ { IRQ_PBA8_UART2 } +#define PBA8_UART3_IRQ { IRQ_PBA8_UART3 } +#define PBA8_SSP_IRQ { IRQ_PBA8_SSP } /* FPGA Primecells */ -AMBA_DEVICE(aaci, "fpga:aaci", AACI, NULL); -AMBA_DEVICE(mmc0, "fpga:mmc0", MMCI0, &realview_mmc0_plat_data); -AMBA_DEVICE(kmi0, "fpga:kmi0", KMI0, NULL); -AMBA_DEVICE(kmi1, "fpga:kmi1", KMI1, NULL); -AMBA_DEVICE(uart3, "fpga:uart3", PBA8_UART3, NULL); +APB_DEVICE(aaci, "fpga:aaci", AACI, NULL); +APB_DEVICE(mmc0, "fpga:mmc0", MMCI0, &realview_mmc0_plat_data); +APB_DEVICE(kmi0, "fpga:kmi0", KMI0, NULL); +APB_DEVICE(kmi1, "fpga:kmi1", KMI1, NULL); +APB_DEVICE(uart3, "fpga:uart3", PBA8_UART3, NULL); /* DevChip Primecells */ -AMBA_DEVICE(smc, "dev:smc", PBA8_SMC, NULL); -AMBA_DEVICE(sctl, "dev:sctl", SCTL, NULL); -AMBA_DEVICE(wdog, "dev:wdog", PBA8_WATCHDOG, NULL); -AMBA_DEVICE(gpio0, "dev:gpio0", PBA8_GPIO0, &gpio0_plat_data); -AMBA_DEVICE(gpio1, "dev:gpio1", GPIO1, &gpio1_plat_data); -AMBA_DEVICE(gpio2, "dev:gpio2", GPIO2, &gpio2_plat_data); -AMBA_DEVICE(rtc, "dev:rtc", PBA8_RTC, NULL); -AMBA_DEVICE(sci0, "dev:sci0", SCI, NULL); -AMBA_DEVICE(uart0, "dev:uart0", PBA8_UART0, NULL); -AMBA_DEVICE(uart1, "dev:uart1", PBA8_UART1, NULL); -AMBA_DEVICE(uart2, "dev:uart2", PBA8_UART2, NULL); -AMBA_DEVICE(ssp0, "dev:ssp0", PBA8_SSP, &ssp0_plat_data); +AHB_DEVICE(smc, "dev:smc", PBA8_SMC, NULL); +AHB_DEVICE(sctl, "dev:sctl", SCTL, NULL); +APB_DEVICE(wdog, "dev:wdog", PBA8_WATCHDOG, NULL); +APB_DEVICE(gpio0, "dev:gpio0", PBA8_GPIO0, &gpio0_plat_data); +APB_DEVICE(gpio1, "dev:gpio1", GPIO1, &gpio1_plat_data); +APB_DEVICE(gpio2, "dev:gpio2", GPIO2, &gpio2_plat_data); +APB_DEVICE(rtc, "dev:rtc", PBA8_RTC, NULL); +APB_DEVICE(sci0, "dev:sci0", SCI, NULL); +APB_DEVICE(uart0, "dev:uart0", PBA8_UART0, NULL); +APB_DEVICE(uart1, "dev:uart1", PBA8_UART1, NULL); +APB_DEVICE(uart2, "dev:uart2", PBA8_UART2, NULL); +APB_DEVICE(ssp0, "dev:ssp0", PBA8_SSP, &ssp0_plat_data); /* Primecells on the NEC ISSP chip */ -AMBA_DEVICE(clcd, "issp:clcd", PBA8_CLCD, &clcd_plat_data); -AMBA_DEVICE(dmac, "issp:dmac", DMAC, NULL); +AHB_DEVICE(clcd, "issp:clcd", PBA8_CLCD, &clcd_plat_data); +AHB_DEVICE(dmac, "issp:dmac", DMAC, NULL); static struct amba_device *amba_devs[] __initdata = { &dmac_device, diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c index ac715645b86..1cd9956f587 100644 --- a/arch/arm/mach-realview/realview_pbx.c +++ b/arch/arm/mach-realview/realview_pbx.c @@ -144,52 +144,52 @@ static struct pl022_ssp_controller ssp0_plat_data = { * RealView PBXCore AMBA devices */ -#define GPIO2_IRQ { IRQ_PBX_GPIO2, NO_IRQ } -#define GPIO3_IRQ { IRQ_PBX_GPIO3, NO_IRQ } -#define AACI_IRQ { IRQ_PBX_AACI, NO_IRQ } +#define GPIO2_IRQ { IRQ_PBX_GPIO2 } +#define GPIO3_IRQ { IRQ_PBX_GPIO3 } +#define AACI_IRQ { IRQ_PBX_AACI } #define MMCI0_IRQ { IRQ_PBX_MMCI0A, IRQ_PBX_MMCI0B } -#define KMI0_IRQ { IRQ_PBX_KMI0, NO_IRQ } -#define KMI1_IRQ { IRQ_PBX_KMI1, NO_IRQ } -#define PBX_SMC_IRQ { NO_IRQ, NO_IRQ } -#define MPMC_IRQ { NO_IRQ, NO_IRQ } -#define PBX_CLCD_IRQ { IRQ_PBX_CLCD, NO_IRQ } -#define DMAC_IRQ { IRQ_PBX_DMAC, NO_IRQ } -#define SCTL_IRQ { NO_IRQ, NO_IRQ } -#define PBX_WATCHDOG_IRQ { IRQ_PBX_WATCHDOG, NO_IRQ } -#define PBX_GPIO0_IRQ { IRQ_PBX_GPIO0, NO_IRQ } -#define GPIO1_IRQ { IRQ_PBX_GPIO1, NO_IRQ } -#define PBX_RTC_IRQ { IRQ_PBX_RTC, NO_IRQ } -#define SCI_IRQ { IRQ_PBX_SCI, NO_IRQ } -#define PBX_UART0_IRQ { IRQ_PBX_UART0, NO_IRQ } -#define PBX_UART1_IRQ { IRQ_PBX_UART1, NO_IRQ } -#define PBX_UART2_IRQ { IRQ_PBX_UART2, NO_IRQ } -#define PBX_UART3_IRQ { IRQ_PBX_UART3, NO_IRQ } -#define PBX_SSP_IRQ { IRQ_PBX_SSP, NO_IRQ } +#define KMI0_IRQ { IRQ_PBX_KMI0 } +#define KMI1_IRQ { IRQ_PBX_KMI1 } +#define PBX_SMC_IRQ { } +#define MPMC_IRQ { } +#define PBX_CLCD_IRQ { IRQ_PBX_CLCD } +#define DMAC_IRQ { IRQ_PBX_DMAC } +#define SCTL_IRQ { } +#define PBX_WATCHDOG_IRQ { IRQ_PBX_WATCHDOG } +#define PBX_GPIO0_IRQ { IRQ_PBX_GPIO0 } +#define GPIO1_IRQ { IRQ_PBX_GPIO1 } +#define PBX_RTC_IRQ { IRQ_PBX_RTC } +#define SCI_IRQ { IRQ_PBX_SCI } +#define PBX_UART0_IRQ { IRQ_PBX_UART0 } +#define PBX_UART1_IRQ { IRQ_PBX_UART1 } +#define PBX_UART2_IRQ { IRQ_PBX_UART2 } +#define PBX_UART3_IRQ { IRQ_PBX_UART3 } +#define PBX_SSP_IRQ { IRQ_PBX_SSP } /* FPGA Primecells */ -AMBA_DEVICE(aaci, "fpga:aaci", AACI, NULL); -AMBA_DEVICE(mmc0, "fpga:mmc0", MMCI0, &realview_mmc0_plat_data); -AMBA_DEVICE(kmi0, "fpga:kmi0", KMI0, NULL); -AMBA_DEVICE(kmi1, "fpga:kmi1", KMI1, NULL); -AMBA_DEVICE(uart3, "fpga:uart3", PBX_UART3, NULL); +APB_DEVICE(aaci, "fpga:aaci", AACI, NULL); +APB_DEVICE(mmc0, "fpga:mmc0", MMCI0, &realview_mmc0_plat_data); +APB_DEVICE(kmi0, "fpga:kmi0", KMI0, NULL); +APB_DEVICE(kmi1, "fpga:kmi1", KMI1, NULL); +APB_DEVICE(uart3, "fpga:uart3", PBX_UART3, NULL); /* DevChip Primecells */ -AMBA_DEVICE(smc, "dev:smc", PBX_SMC, NULL); -AMBA_DEVICE(sctl, "dev:sctl", SCTL, NULL); -AMBA_DEVICE(wdog, "dev:wdog", PBX_WATCHDOG, NULL); -AMBA_DEVICE(gpio0, "dev:gpio0", PBX_GPIO0, &gpio0_plat_data); -AMBA_DEVICE(gpio1, "dev:gpio1", GPIO1, &gpio1_plat_data); -AMBA_DEVICE(gpio2, "dev:gpio2", GPIO2, &gpio2_plat_data); -AMBA_DEVICE(rtc, "dev:rtc", PBX_RTC, NULL); -AMBA_DEVICE(sci0, "dev:sci0", SCI, NULL); -AMBA_DEVICE(uart0, "dev:uart0", PBX_UART0, NULL); -AMBA_DEVICE(uart1, "dev:uart1", PBX_UART1, NULL); -AMBA_DEVICE(uart2, "dev:uart2", PBX_UART2, NULL); -AMBA_DEVICE(ssp0, "dev:ssp0", PBX_SSP, &ssp0_plat_data); +AHB_DEVICE(smc, "dev:smc", PBX_SMC, NULL); +AHB_DEVICE(sctl, "dev:sctl", SCTL, NULL); +APB_DEVICE(wdog, "dev:wdog", PBX_WATCHDOG, NULL); +APB_DEVICE(gpio0, "dev:gpio0", PBX_GPIO0, &gpio0_plat_data); +APB_DEVICE(gpio1, "dev:gpio1", GPIO1, &gpio1_plat_data); +APB_DEVICE(gpio2, "dev:gpio2", GPIO2, &gpio2_plat_data); +APB_DEVICE(rtc, "dev:rtc", PBX_RTC, NULL); +APB_DEVICE(sci0, "dev:sci0", SCI, NULL); +APB_DEVICE(uart0, "dev:uart0", PBX_UART0, NULL); +APB_DEVICE(uart1, "dev:uart1", PBX_UART1, NULL); +APB_DEVICE(uart2, "dev:uart2", PBX_UART2, NULL); +APB_DEVICE(ssp0, "dev:ssp0", PBX_SSP, &ssp0_plat_data); /* Primecells on the NEC ISSP chip */ -AMBA_DEVICE(clcd, "issp:clcd", PBX_CLCD, &clcd_plat_data); -AMBA_DEVICE(dmac, "issp:dmac", DMAC, NULL); +AHB_DEVICE(clcd, "issp:clcd", PBX_CLCD, &clcd_plat_data); +AHB_DEVICE(dmac, "issp:dmac", DMAC, NULL); static struct amba_device *amba_devs[] __initdata = { &dmac_device, diff --git a/arch/arm/mach-rpc/include/mach/system.h b/arch/arm/mach-rpc/include/mach/system.h deleted file mode 100644 index 359bab94b6a..00000000000 --- a/arch/arm/mach-rpc/include/mach/system.h +++ /dev/null @@ -1,13 +0,0 @@ -/* - * arch/arm/mach-rpc/include/mach/system.h - * - * Copyright (C) 1996-1999 Russell King. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -static inline void arch_idle(void) -{ - cpu_do_idle(); -} diff --git a/arch/arm/mach-s3c2410/include/mach/system.h b/arch/arm/mach-s3c2410/include/mach/system.h deleted file mode 100644 index 5e215c1a5c8..00000000000 --- a/arch/arm/mach-s3c2410/include/mach/system.h +++ /dev/null @@ -1,54 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/system.h - * - * Copyright (c) 2003 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * S3C2410 - System function defines and includes - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/io.h> -#include <mach/hardware.h> - -#include <mach/map.h> -#include <mach/idle.h> - -#include <mach/regs-clock.h> - -void (*s3c24xx_idle)(void); - -void s3c24xx_default_idle(void) -{ - unsigned long tmp; - int i; - - /* idle the system by using the idle mode which will wait for an - * interrupt to happen before restarting the system. - */ - - /* Warning: going into idle state upsets jtag scanning */ - - __raw_writel(__raw_readl(S3C2410_CLKCON) | S3C2410_CLKCON_IDLE, - S3C2410_CLKCON); - - /* the samsung port seems to do a loop and then unset idle.. */ - for (i = 0; i < 50; i++) { - tmp += __raw_readl(S3C2410_CLKCON); /* ensure loop not optimised out */ - } - - /* this bit is not cleared on re-start... */ - - __raw_writel(__raw_readl(S3C2410_CLKCON) & ~S3C2410_CLKCON_IDLE, - S3C2410_CLKCON); -} - -static void arch_idle(void) -{ - if (s3c24xx_idle != NULL) - (s3c24xx_idle)(); - else - s3c24xx_default_idle(); -} diff --git a/arch/arm/mach-s3c2412/s3c2412.c b/arch/arm/mach-s3c2412/s3c2412.c index aff6e85a97c..c6eac987109 100644 --- a/arch/arm/mach-s3c2412/s3c2412.c +++ b/arch/arm/mach-s3c2412/s3c2412.c @@ -32,8 +32,6 @@ #include <asm/proc-fns.h> #include <asm/irq.h> -#include <mach/idle.h> - #include <plat/cpu-freq.h> #include <mach/regs-clock.h> @@ -164,7 +162,7 @@ void __init s3c2412_map_io(void) /* set our idle function */ - s3c24xx_idle = s3c2412_idle; + arm_pm_idle = s3c2412_idle; /* register our io-tables */ diff --git a/arch/arm/mach-s3c2416/s3c2416.c b/arch/arm/mach-s3c2416/s3c2416.c index 5287d2808d3..08bb0355159 100644 --- a/arch/arm/mach-s3c2416/s3c2416.c +++ b/arch/arm/mach-s3c2416/s3c2416.c @@ -44,7 +44,6 @@ #include <asm/proc-fns.h> #include <asm/irq.h> -#include <mach/idle.h> #include <mach/regs-s3c2443-clock.h> #include <plat/gpio-core.h> @@ -88,8 +87,6 @@ int __init s3c2416_init(void) { printk(KERN_INFO "S3C2416: Initializing architecture\n"); - /* s3c24xx_idle = s3c2416_idle; */ - /* change WDT IRQ number */ s3c_device_wdt.resource[1].start = IRQ_S3C2443_WDT; s3c_device_wdt.resource[1].end = IRQ_S3C2443_WDT; diff --git a/arch/arm/mach-s3c2440/common.h b/arch/arm/mach-s3c2440/common.h index db8a98ac68c..0c1eb1dfc53 100644 --- a/arch/arm/mach-s3c2440/common.h +++ b/arch/arm/mach-s3c2440/common.h @@ -12,6 +12,6 @@ #ifndef __ARCH_ARM_MACH_S3C2440_COMMON_H #define __ARCH_ARM_MACH_S3C2440_COMMON_H -void s3c2440_restart(char mode, const char *cmd); +void s3c244x_restart(char mode, const char *cmd); #endif /* __ARCH_ARM_MACH_S3C2440_COMMON_H */ diff --git a/arch/arm/mach-s3c2440/mach-anubis.c b/arch/arm/mach-s3c2440/mach-anubis.c index 24569550de1..19b577bc09b 100644 --- a/arch/arm/mach-s3c2440/mach-anubis.c +++ b/arch/arm/mach-s3c2440/mach-anubis.c @@ -487,5 +487,5 @@ MACHINE_START(ANUBIS, "Simtec-Anubis") .init_machine = anubis_init, .init_irq = s3c24xx_init_irq, .timer = &s3c24xx_timer, - .restart = s3c2440_restart, + .restart = s3c244x_restart, MACHINE_END diff --git a/arch/arm/mach-s3c2440/mach-at2440evb.c b/arch/arm/mach-s3c2440/mach-at2440evb.c index d6a9763110c..d7ae49c9011 100644 --- a/arch/arm/mach-s3c2440/mach-at2440evb.c +++ b/arch/arm/mach-s3c2440/mach-at2440evb.c @@ -222,5 +222,5 @@ MACHINE_START(AT2440EVB, "AT2440EVB") .init_machine = at2440evb_init, .init_irq = s3c24xx_init_irq, .timer = &s3c24xx_timer, - .restart = s3c2440_restart, + .restart = s3c244x_restart, MACHINE_END diff --git a/arch/arm/mach-s3c2440/mach-gta02.c b/arch/arm/mach-s3c2440/mach-gta02.c index 5859e609d28..9a4a5bc008e 100644 --- a/arch/arm/mach-s3c2440/mach-gta02.c +++ b/arch/arm/mach-s3c2440/mach-gta02.c @@ -601,5 +601,5 @@ MACHINE_START(NEO1973_GTA02, "GTA02") .init_irq = s3c24xx_init_irq, .init_machine = gta02_machine_init, .timer = &s3c24xx_timer, - .restart = s3c2440_restart, + .restart = s3c244x_restart, MACHINE_END diff --git a/arch/arm/mach-s3c2440/mach-mini2440.c b/arch/arm/mach-s3c2440/mach-mini2440.c index adbbb85bc4c..5d66fb218a4 100644 --- a/arch/arm/mach-s3c2440/mach-mini2440.c +++ b/arch/arm/mach-s3c2440/mach-mini2440.c @@ -701,5 +701,5 @@ MACHINE_START(MINI2440, "MINI2440") .init_machine = mini2440_init, .init_irq = s3c24xx_init_irq, .timer = &s3c24xx_timer, - .restart = s3c2440_restart, + .restart = s3c244x_restart, MACHINE_END diff --git a/arch/arm/mach-s3c2440/mach-nexcoder.c b/arch/arm/mach-s3c2440/mach-nexcoder.c index 40eaf844bc1..5198e3e1c5b 100644 --- a/arch/arm/mach-s3c2440/mach-nexcoder.c +++ b/arch/arm/mach-s3c2440/mach-nexcoder.c @@ -158,5 +158,5 @@ MACHINE_START(NEXCODER_2440, "NexVision - Nexcoder 2440") .init_machine = nexcoder_init, .init_irq = s3c24xx_init_irq, .timer = &s3c24xx_timer, - .restart = s3c2440_restart, + .restart = s3c244x_restart, MACHINE_END diff --git a/arch/arm/mach-s3c2440/mach-osiris.c b/arch/arm/mach-s3c2440/mach-osiris.c index 4c480ef734f..c5daeb612a8 100644 --- a/arch/arm/mach-s3c2440/mach-osiris.c +++ b/arch/arm/mach-s3c2440/mach-osiris.c @@ -436,5 +436,5 @@ MACHINE_START(OSIRIS, "Simtec-OSIRIS") .init_irq = s3c24xx_init_irq, .init_machine = osiris_init, .timer = &s3c24xx_timer, - .restart = s3c2440_restart, + .restart = s3c244x_restart, MACHINE_END diff --git a/arch/arm/mach-s3c2440/mach-rx1950.c b/arch/arm/mach-s3c2440/mach-rx1950.c index 80077f6472e..6f68abf44fa 100644 --- a/arch/arm/mach-s3c2440/mach-rx1950.c +++ b/arch/arm/mach-s3c2440/mach-rx1950.c @@ -822,5 +822,5 @@ MACHINE_START(RX1950, "HP iPAQ RX1950") .init_irq = s3c24xx_init_irq, .init_machine = rx1950_init_machine, .timer = &s3c24xx_timer, - .restart = s3c2440_restart, + .restart = s3c244x_restart, MACHINE_END diff --git a/arch/arm/mach-s3c2440/mach-rx3715.c b/arch/arm/mach-s3c2440/mach-rx3715.c index 20103bafbd4..56af3544759 100644 --- a/arch/arm/mach-s3c2440/mach-rx3715.c +++ b/arch/arm/mach-s3c2440/mach-rx3715.c @@ -213,5 +213,5 @@ MACHINE_START(RX3715, "IPAQ-RX3715") .init_irq = rx3715_init_irq, .init_machine = rx3715_init_machine, .timer = &s3c24xx_timer, - .restart = s3c2440_restart, + .restart = s3c244x_restart, MACHINE_END diff --git a/arch/arm/mach-s3c2440/mach-smdk2440.c b/arch/arm/mach-s3c2440/mach-smdk2440.c index 1deb60d12a6..83a1036d7dc 100644 --- a/arch/arm/mach-s3c2440/mach-smdk2440.c +++ b/arch/arm/mach-s3c2440/mach-smdk2440.c @@ -183,5 +183,5 @@ MACHINE_START(S3C2440, "SMDK2440") .map_io = smdk2440_map_io, .init_machine = smdk2440_machine_init, .timer = &s3c24xx_timer, - .restart = s3c2440_restart, + .restart = s3c244x_restart, MACHINE_END diff --git a/arch/arm/mach-s3c2440/s3c2440.c b/arch/arm/mach-s3c2440/s3c2440.c index 517623a09fc..2b3dddb49af 100644 --- a/arch/arm/mach-s3c2440/s3c2440.c +++ b/arch/arm/mach-s3c2440/s3c2440.c @@ -35,7 +35,6 @@ #include <plat/cpu.h> #include <plat/s3c244x.h> #include <plat/pm.h> -#include <plat/watchdog-reset.h> #include <plat/gpio-core.h> #include <plat/gpio-cfg.h> @@ -74,15 +73,3 @@ void __init s3c2440_map_io(void) s3c24xx_gpiocfg_default.set_pull = s3c24xx_gpio_setpull_1up; s3c24xx_gpiocfg_default.get_pull = s3c24xx_gpio_getpull_1up; } - -void s3c2440_restart(char mode, const char *cmd) -{ - if (mode == 's') { - soft_restart(0); - } - - arch_wdt_reset(); - - /* we'll take a jump through zero as a poor second */ - soft_restart(0); -} diff --git a/arch/arm/mach-s3c2440/s3c244x.c b/arch/arm/mach-s3c2440/s3c244x.c index 36bc60f61d0..d15852f642b 100644 --- a/arch/arm/mach-s3c2440/s3c244x.c +++ b/arch/arm/mach-s3c2440/s3c244x.c @@ -46,6 +46,7 @@ #include <plat/pm.h> #include <plat/pll.h> #include <plat/nand-core.h> +#include <plat/watchdog-reset.h> static struct map_desc s3c244x_iodesc[] __initdata = { IODESC_ENT(CLKPWR), @@ -196,3 +197,14 @@ struct syscore_ops s3c244x_pm_syscore_ops = { .suspend = s3c244x_suspend, .resume = s3c244x_resume, }; + +void s3c244x_restart(char mode, const char *cmd) +{ + if (mode == 's') + soft_restart(0); + + arch_wdt_reset(); + + /* we'll take a jump through zero as a poor second */ + soft_restart(0); +} diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig index dd20c66cd70..dc451232cf4 100644 --- a/arch/arm/mach-s3c64xx/Kconfig +++ b/arch/arm/mach-s3c64xx/Kconfig @@ -296,5 +296,6 @@ config MACH_WLF_CRAGG_6410 select S3C64XX_DEV_SPI0 select SAMSUNG_GPIO_EXTRA128 select I2C + select LEDS_GPIO_REGISTER help Machine support for the Wolfson Cragganmore S3C6410 variant. diff --git a/arch/arm/mach-s3c64xx/include/mach/system.h b/arch/arm/mach-s3c64xx/include/mach/system.h deleted file mode 100644 index 353ed4389ae..00000000000 --- a/arch/arm/mach-s3c64xx/include/mach/system.h +++ /dev/null @@ -1,19 +0,0 @@ -/* linux/arch/arm/mach-s3c6400/include/mach/system.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * S3C6400 - system implementation - */ - -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H __FILE__ - -static void arch_idle(void) -{ - /* nothing here yet */ -} - -#endif /* __ASM_ARCH_IRQ_H */ diff --git a/arch/arm/mach-s3c64xx/mach-crag6410-module.c b/arch/arm/mach-s3c64xx/mach-crag6410-module.c index 32a30f38ba0..b6a67728cc8 100644 --- a/arch/arm/mach-s3c64xx/mach-crag6410-module.c +++ b/arch/arm/mach-s3c64xx/mach-crag6410-module.c @@ -11,6 +11,7 @@ #include <linux/export.h> #include <linux/interrupt.h> #include <linux/i2c.h> +#include <linux/spi/spi.h> #include <linux/mfd/wm831x/irq.h> #include <linux/mfd/wm831x/gpio.h> @@ -21,8 +22,25 @@ #include <sound/wm8962.h> #include <sound/wm9081.h> +#include <plat/s3c64xx-spi.h> + #include <mach/crag6410.h> +static struct s3c64xx_spi_csinfo wm0010_spi_csinfo = { + .set_level = gpio_set_value, + .line = S3C64XX_GPC(3), +}; + +static struct spi_board_info wm1253_devs[] = { + [0] = { + .modalias = "wm0010", + .bus_num = 0, + .chip_select = 0, + .mode = SPI_MODE_0, + .controller_data = &wm0010_spi_csinfo, + }, +}; + static struct wm5100_pdata wm5100_pdata = { .ldo_ena = S3C64XX_GPN(7), .irq_flags = IRQF_TRIGGER_HIGH, @@ -159,14 +177,21 @@ static __devinitdata const struct { const char *name; const struct i2c_board_info *i2c_devs; int num_i2c_devs; + const struct spi_board_info *spi_devs; + int num_spi_devs; } gf_mods[] = { { .id = 0x01, .name = "1250-EV1 Springbank" }, { .id = 0x02, .name = "1251-EV1 Jura" }, { .id = 0x03, .name = "1252-EV1 Glenlivet" }, { .id = 0x11, .name = "6249-EV2 Glenfarclas", }, + { .id = 0x14, .name = "6271-EV1 Lochnagar" }, + { .id = 0x15, .name = "XXXX-EV1 Bells" }, { .id = 0x21, .name = "1275-EV1 Mortlach" }, { .id = 0x25, .name = "1274-EV1 Glencadam" }, - { .id = 0x31, .name = "1253-EV1 Tomatin", }, + { .id = 0x31, .name = "1253-EV1 Tomatin", + .spi_devs = wm1253_devs, .num_spi_devs = ARRAY_SIZE(wm1253_devs) }, + { .id = 0x32, .name = "XXXX-EV1 Caol Illa" }, + { .id = 0x33, .name = "XXXX-EV1 Oban" }, { .id = 0x39, .name = "1254-EV1 Dallas Dhu", .i2c_devs = wm1254_devs, .num_i2c_devs = ARRAY_SIZE(wm1254_devs) }, { .id = 0x3a, .name = "1259-EV1 Tobermory", @@ -198,12 +223,16 @@ static __devinit int wlf_gf_module_probe(struct i2c_client *i2c, if (i < ARRAY_SIZE(gf_mods)) { dev_info(&i2c->dev, "%s revision %d\n", gf_mods[i].name, rev + 1); + for (j = 0; j < gf_mods[i].num_i2c_devs; j++) { if (!i2c_new_device(i2c->adapter, &(gf_mods[i].i2c_devs[j]))) dev_err(&i2c->dev, "Failed to register dev: %d\n", ret); } + + spi_register_board_info(gf_mods[i].spi_devs, + gf_mods[i].num_spi_devs); } else { dev_warn(&i2c->dev, "Unknown module ID 0x%x revision %d\n", id, rev + 1); diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c index 8077f650eb0..e991127fda0 100644 --- a/arch/arm/mach-s3c64xx/mach-crag6410.c +++ b/arch/arm/mach-s3c64xx/mach-crag6410.c @@ -19,7 +19,9 @@ #include <linux/io.h> #include <linux/init.h> #include <linux/gpio.h> +#include <linux/leds.h> #include <linux/delay.h> +#include <linux/mmc/host.h> #include <linux/regulator/machine.h> #include <linux/regulator/fixed.h> #include <linux/pwm_backlight.h> @@ -298,6 +300,7 @@ static struct platform_device littlemill_device = { }; static struct regulator_consumer_supply wallvdd_consumers[] = { + REGULATOR_SUPPLY("SPKVDD", "1-001a"), REGULATOR_SUPPLY("SPKVDD1", "1-001a"), REGULATOR_SUPPLY("SPKVDD2", "1-001a"), REGULATOR_SUPPLY("SPKVDDL", "1-001a"), @@ -574,11 +577,19 @@ static struct s3c2410_platform_i2c i2c0_pdata = { .frequency = 400000, }; +static struct regulator_consumer_supply pvdd_1v2_consumers[] __initdata = { + REGULATOR_SUPPLY("DCVDD", "spi0.0"), + REGULATOR_SUPPLY("AVDD", "spi0.0"), +}; + static struct regulator_init_data pvdd_1v2 __initdata = { .constraints = { .name = "PVDD_1V2", - .always_on = 1, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, }, + + .consumer_supplies = pvdd_1v2_consumers, + .num_consumer_supplies = ARRAY_SIZE(pvdd_1v2_consumers), }; static struct regulator_consumer_supply pvdd_1v8_consumers[] __initdata = { @@ -592,6 +603,7 @@ static struct regulator_consumer_supply pvdd_1v8_consumers[] __initdata = { REGULATOR_SUPPLY("AVDD2", "1-001a"), REGULATOR_SUPPLY("DCVDD", "1-001a"), REGULATOR_SUPPLY("AVDD", "1-001a"), + REGULATOR_SUPPLY("DBVDD", "spi0.0"), }; static struct regulator_init_data pvdd_1v8 __initdata = { @@ -681,6 +693,7 @@ static void __init crag6410_map_io(void) static struct s3c_sdhci_platdata crag6410_hsmmc2_pdata = { .max_width = 4, .cd_type = S3C_SDHCI_CD_PERMANENT, + .host_caps = MMC_CAP_POWER_OFF_CARD, }; static void crag6410_cfg_sdhci0(struct platform_device *dev, int width) @@ -696,6 +709,55 @@ static struct s3c_sdhci_platdata crag6410_hsmmc0_pdata = { .max_width = 4, .cd_type = S3C_SDHCI_CD_INTERNAL, .cfg_gpio = crag6410_cfg_sdhci0, + .host_caps = MMC_CAP_POWER_OFF_CARD, +}; + +static const struct gpio_led gpio_leds[] = { + { + .name = "d13:green:", + .gpio = MMGPIO_GPIO_BASE + 0, + .default_state = LEDS_GPIO_DEFSTATE_ON, + }, + { + .name = "d14:green:", + .gpio = MMGPIO_GPIO_BASE + 1, + .default_state = LEDS_GPIO_DEFSTATE_ON, + }, + { + .name = "d15:green:", + .gpio = MMGPIO_GPIO_BASE + 2, + .default_state = LEDS_GPIO_DEFSTATE_ON, + }, + { + .name = "d16:green:", + .gpio = MMGPIO_GPIO_BASE + 3, + .default_state = LEDS_GPIO_DEFSTATE_ON, + }, + { + .name = "d17:green:", + .gpio = MMGPIO_GPIO_BASE + 4, + .default_state = LEDS_GPIO_DEFSTATE_ON, + }, + { + .name = "d18:green:", + .gpio = MMGPIO_GPIO_BASE + 5, + .default_state = LEDS_GPIO_DEFSTATE_ON, + }, + { + .name = "d19:green:", + .gpio = MMGPIO_GPIO_BASE + 6, + .default_state = LEDS_GPIO_DEFSTATE_ON, + }, + { + .name = "d20:green:", + .gpio = MMGPIO_GPIO_BASE + 7, + .default_state = LEDS_GPIO_DEFSTATE_ON, + }, +}; + +static const struct gpio_led_platform_data gpio_leds_pdata = { + .leds = gpio_leds, + .num_leds = ARRAY_SIZE(gpio_leds), }; static void __init crag6410_machine_init(void) @@ -727,9 +789,12 @@ static void __init crag6410_machine_init(void) i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1)); samsung_keypad_set_platdata(&crag6410_keypad_data); + s3c64xx_spi0_set_platdata(&s3c64xx_spi0_pdata, 0, 1); platform_add_devices(crag6410_devices, ARRAY_SIZE(crag6410_devices)); + gpio_led_register_device(-1, &gpio_leds_pdata); + regulator_has_full_constraints(); s3c64xx_pm_init(); diff --git a/arch/arm/mach-s5p64x0/common.c b/arch/arm/mach-s5p64x0/common.c index 52b89a37644..9143f8b1996 100644 --- a/arch/arm/mach-s5p64x0/common.c +++ b/arch/arm/mach-s5p64x0/common.c @@ -146,15 +146,12 @@ static void s5p64x0_idle(void) { unsigned long val; - if (!need_resched()) { - val = __raw_readl(S5P64X0_PWR_CFG); - val &= ~(0x3 << 5); - val |= (0x1 << 5); - __raw_writel(val, S5P64X0_PWR_CFG); + val = __raw_readl(S5P64X0_PWR_CFG); + val &= ~(0x3 << 5); + val |= (0x1 << 5); + __raw_writel(val, S5P64X0_PWR_CFG); - cpu_do_idle(); - } - local_irq_enable(); + cpu_do_idle(); } /* @@ -286,7 +283,7 @@ int __init s5p64x0_init(void) printk(KERN_INFO "S5P64X0(S5P6440/S5P6450): Initializing architecture\n"); /* set idle function */ - pm_idle = s5p64x0_idle; + arm_pm_idle = s5p64x0_idle; return device_register(&s5p64x0_dev); } diff --git a/arch/arm/mach-s5p64x0/dma.c b/arch/arm/mach-s5p64x0/dma.c index f820c074440..f7f68ad7791 100644 --- a/arch/arm/mach-s5p64x0/dma.c +++ b/arch/arm/mach-s5p64x0/dma.c @@ -108,34 +108,22 @@ struct dma_pl330_platdata s5p6450_pdma_pdata = { .peri_id = s5p6450_pdma_peri, }; -struct amba_device s5p64x0_device_pdma = { - .dev = { - .init_name = "dma-pl330", - .dma_mask = &dma_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, - .res = { - .start = S5P64X0_PA_PDMA, - .end = S5P64X0_PA_PDMA + SZ_4K, - .flags = IORESOURCE_MEM, - }, - .irq = {IRQ_DMA0, NO_IRQ}, - .periphid = 0x00041330, -}; +AMBA_AHB_DEVICE(s5p64x0_pdma, "dma-pl330", 0x00041330, S5P64X0_PA_PDMA, + {IRQ_DMA0}, NULL); static int __init s5p64x0_dma_init(void) { if (soc_is_s5p6450()) { dma_cap_set(DMA_SLAVE, s5p6450_pdma_pdata.cap_mask); dma_cap_set(DMA_CYCLIC, s5p6450_pdma_pdata.cap_mask); - s5p64x0_device_pdma.dev.platform_data = &s5p6450_pdma_pdata; + s5p64x0_pdma_device.dev.platform_data = &s5p6450_pdma_pdata; } else { dma_cap_set(DMA_SLAVE, s5p6440_pdma_pdata.cap_mask); dma_cap_set(DMA_CYCLIC, s5p6440_pdma_pdata.cap_mask); - s5p64x0_device_pdma.dev.platform_data = &s5p6440_pdma_pdata; + s5p64x0_pdma_device.dev.platform_data = &s5p6440_pdma_pdata; } - amba_device_register(&s5p64x0_device_pdma, &iomem_resource); + amba_device_register(&s5p64x0_pdma_device, &iomem_resource); return 0; } diff --git a/arch/arm/mach-s5p64x0/include/mach/system.h b/arch/arm/mach-s5p64x0/include/mach/system.h deleted file mode 100644 index cf26e0954a2..00000000000 --- a/arch/arm/mach-s5p64x0/include/mach/system.h +++ /dev/null @@ -1,21 +0,0 @@ -/* linux/arch/arm/mach-s5p64x0/include/mach/system.h - * - * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * S5P64X0 - system support header - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H __FILE__ - -static void arch_idle(void) -{ - /* nothing here yet */ -} - -#endif /* __ASM_ARCH_SYSTEM_H */ diff --git a/arch/arm/mach-s5pc100/common.c b/arch/arm/mach-s5pc100/common.c index c9095730a7f..ff71e2d467c 100644 --- a/arch/arm/mach-s5pc100/common.c +++ b/arch/arm/mach-s5pc100/common.c @@ -129,14 +129,6 @@ static struct map_desc s5pc100_iodesc[] __initdata = { } }; -static void s5pc100_idle(void) -{ - if (!need_resched()) - cpu_do_idle(); - - local_irq_enable(); -} - /* * s5pc100_map_io * @@ -210,10 +202,6 @@ core_initcall(s5pc100_core_init); int __init s5pc100_init(void) { printk(KERN_INFO "S5PC100: Initializing architecture\n"); - - /* set idle function */ - pm_idle = s5pc100_idle; - return device_register(&s5pc100_dev); } diff --git a/arch/arm/mach-s5pc100/dma.c b/arch/arm/mach-s5pc100/dma.c index c841f4d313f..96b1ab3dcd4 100644 --- a/arch/arm/mach-s5pc100/dma.c +++ b/arch/arm/mach-s5pc100/dma.c @@ -73,21 +73,8 @@ struct dma_pl330_platdata s5pc100_pdma0_pdata = { .peri_id = pdma0_peri, }; -struct amba_device s5pc100_device_pdma0 = { - .dev = { - .init_name = "dma-pl330.0", - .dma_mask = &dma_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &s5pc100_pdma0_pdata, - }, - .res = { - .start = S5PC100_PA_PDMA0, - .end = S5PC100_PA_PDMA0 + SZ_4K, - .flags = IORESOURCE_MEM, - }, - .irq = {IRQ_PDMA0, NO_IRQ}, - .periphid = 0x00041330, -}; +AMBA_AHB_DEVICE(s5pc100_pdma0, "dma-pl330.0", 0x00041330, S5PC100_PA_PDMA0, + {IRQ_PDMA0}, &s5pc100_pdma0_pdata); u8 pdma1_peri[] = { DMACH_UART0_RX, @@ -127,31 +114,18 @@ struct dma_pl330_platdata s5pc100_pdma1_pdata = { .peri_id = pdma1_peri, }; -struct amba_device s5pc100_device_pdma1 = { - .dev = { - .init_name = "dma-pl330.1", - .dma_mask = &dma_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &s5pc100_pdma1_pdata, - }, - .res = { - .start = S5PC100_PA_PDMA1, - .end = S5PC100_PA_PDMA1 + SZ_4K, - .flags = IORESOURCE_MEM, - }, - .irq = {IRQ_PDMA1, NO_IRQ}, - .periphid = 0x00041330, -}; +AMBA_AHB_DEVICE(s5pc100_pdma1, "dma-pl330.1", 0x00041330, S5PC100_PA_PDMA1, + {IRQ_PDMA1}, &s5pc100_pdma1_pdata); static int __init s5pc100_dma_init(void) { dma_cap_set(DMA_SLAVE, s5pc100_pdma0_pdata.cap_mask); dma_cap_set(DMA_CYCLIC, s5pc100_pdma0_pdata.cap_mask); - amba_device_register(&s5pc100_device_pdma0, &iomem_resource); + amba_device_register(&s5pc100_pdma0_device, &iomem_resource); dma_cap_set(DMA_SLAVE, s5pc100_pdma1_pdata.cap_mask); dma_cap_set(DMA_CYCLIC, s5pc100_pdma1_pdata.cap_mask); - amba_device_register(&s5pc100_device_pdma1, &iomem_resource); + amba_device_register(&s5pc100_pdma1_device, &iomem_resource); return 0; } diff --git a/arch/arm/mach-s5pc100/include/mach/system.h b/arch/arm/mach-s5pc100/include/mach/system.h deleted file mode 100644 index afc96c29851..00000000000 --- a/arch/arm/mach-s5pc100/include/mach/system.h +++ /dev/null @@ -1,19 +0,0 @@ -/* linux/arch/arm/mach-s5pc100/include/mach/system.h - * - * Copyright 2009 Samsung Electronics Co. - * Byungho Min <bhmin@samsung.com> - * - * S5PC100 - system implementation - * - * Based on mach-s3c6400/include/mach/system.h - */ - -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H __FILE__ - -static void arch_idle(void) -{ - /* nothing here yet */ -} - -#endif /* __ASM_ARCH_IRQ_H */ diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig index 2cdc42e838b..4c4ca1ade86 100644 --- a/arch/arm/mach-s5pv210/Kconfig +++ b/arch/arm/mach-s5pv210/Kconfig @@ -118,6 +118,10 @@ config MACH_SMDKC110 select S3C_DEV_I2C2 select S3C_DEV_RTC select S3C_DEV_WDT + select S5P_DEV_FIMC0 + select S5P_DEV_FIMC1 + select S5P_DEV_FIMC2 + select S5P_DEV_MFC select SAMSUNG_DEV_IDE select S5PV210_SETUP_I2C1 select S5PV210_SETUP_I2C2 @@ -142,6 +146,11 @@ config MACH_SMDKV210 select S3C_DEV_I2C2 select S3C_DEV_RTC select S3C_DEV_WDT + select S5P_DEV_FIMC0 + select S5P_DEV_FIMC1 + select S5P_DEV_FIMC2 + select S5P_DEV_JPEG + select S5P_DEV_MFC select SAMSUNG_DEV_ADC select SAMSUNG_DEV_BACKLIGHT select SAMSUNG_DEV_IDE diff --git a/arch/arm/mach-s5pv210/clock.c b/arch/arm/mach-s5pv210/clock.c index b9ec0c35379..09609d50961 100644 --- a/arch/arm/mach-s5pv210/clock.c +++ b/arch/arm/mach-s5pv210/clock.c @@ -340,6 +340,11 @@ static struct clk init_clocks_off[] = { .enable = s5pv210_clk_ip0_ctrl, .ctrlbit = (1 << 26), }, { + .name = "jpeg", + .parent = &clk_hclk_dsys.clk, + .enable = s5pv210_clk_ip0_ctrl, + .ctrlbit = (1 << 28), + }, { .name = "mfc", .devname = "s5p-mfc", .parent = &clk_pclk_psys.clk, diff --git a/arch/arm/mach-s5pv210/common.c b/arch/arm/mach-s5pv210/common.c index 9c1bcdcc12c..4c9e9027df9 100644 --- a/arch/arm/mach-s5pv210/common.c +++ b/arch/arm/mach-s5pv210/common.c @@ -142,14 +142,6 @@ static struct map_desc s5pv210_iodesc[] __initdata = { } }; -static void s5pv210_idle(void) -{ - if (!need_resched()) - cpu_do_idle(); - - local_irq_enable(); -} - void s5pv210_restart(char mode, const char *cmd) { __raw_writel(0x1, S5P_SWRESET); @@ -247,10 +239,6 @@ core_initcall(s5pv210_core_init); int __init s5pv210_init(void) { printk(KERN_INFO "S5PV210: Initializing architecture\n"); - - /* set idle function */ - pm_idle = s5pv210_idle; - return device_register(&s5pv210_dev); } diff --git a/arch/arm/mach-s5pv210/dma.c b/arch/arm/mach-s5pv210/dma.c index a6113e0267f..f6885d247d1 100644 --- a/arch/arm/mach-s5pv210/dma.c +++ b/arch/arm/mach-s5pv210/dma.c @@ -71,21 +71,8 @@ struct dma_pl330_platdata s5pv210_pdma0_pdata = { .peri_id = pdma0_peri, }; -struct amba_device s5pv210_device_pdma0 = { - .dev = { - .init_name = "dma-pl330.0", - .dma_mask = &dma_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &s5pv210_pdma0_pdata, - }, - .res = { - .start = S5PV210_PA_PDMA0, - .end = S5PV210_PA_PDMA0 + SZ_4K, - .flags = IORESOURCE_MEM, - }, - .irq = {IRQ_PDMA0, NO_IRQ}, - .periphid = 0x00041330, -}; +AMBA_AHB_DEVICE(s5pv210_pdma0, "dma-pl330.0", 0x00041330, S5PV210_PA_PDMA0, + {IRQ_PDMA0}, &s5pv210_pdma0_pdata); u8 pdma1_peri[] = { DMACH_UART0_RX, @@ -127,31 +114,18 @@ struct dma_pl330_platdata s5pv210_pdma1_pdata = { .peri_id = pdma1_peri, }; -struct amba_device s5pv210_device_pdma1 = { - .dev = { - .init_name = "dma-pl330.1", - .dma_mask = &dma_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &s5pv210_pdma1_pdata, - }, - .res = { - .start = S5PV210_PA_PDMA1, - .end = S5PV210_PA_PDMA1 + SZ_4K, - .flags = IORESOURCE_MEM, - }, - .irq = {IRQ_PDMA1, NO_IRQ}, - .periphid = 0x00041330, -}; +AMBA_AHB_DEVICE(s5pv210_pdma1, "dma-pl330.1", 0x00041330, S5PV210_PA_PDMA1, + {IRQ_PDMA1}, &s5pv210_pdma1_pdata); static int __init s5pv210_dma_init(void) { dma_cap_set(DMA_SLAVE, s5pv210_pdma0_pdata.cap_mask); dma_cap_set(DMA_CYCLIC, s5pv210_pdma0_pdata.cap_mask); - amba_device_register(&s5pv210_device_pdma0, &iomem_resource); + amba_device_register(&s5pv210_pdma0_device, &iomem_resource); dma_cap_set(DMA_SLAVE, s5pv210_pdma1_pdata.cap_mask); dma_cap_set(DMA_CYCLIC, s5pv210_pdma1_pdata.cap_mask); - amba_device_register(&s5pv210_device_pdma1, &iomem_resource); + amba_device_register(&s5pv210_pdma1_device, &iomem_resource); return 0; } diff --git a/arch/arm/mach-s5pv210/include/mach/map.h b/arch/arm/mach-s5pv210/include/mach/map.h index 89c34b8f73b..b7c8a1917ff 100644 --- a/arch/arm/mach-s5pv210/include/mach/map.h +++ b/arch/arm/mach-s5pv210/include/mach/map.h @@ -90,6 +90,8 @@ #define S5PV210_PA_FIMC1 0xFB300000 #define S5PV210_PA_FIMC2 0xFB400000 +#define S5PV210_PA_JPEG 0xFB600000 + #define S5PV210_PA_SDO 0xF9000000 #define S5PV210_PA_VP 0xF9100000 #define S5PV210_PA_MIXER 0xF9200000 @@ -132,6 +134,8 @@ #define S5P_PA_SYSCON S5PV210_PA_SYSCON #define S5P_PA_TIMER S5PV210_PA_TIMER +#define S5P_PA_JPEG S5PV210_PA_JPEG + #define SAMSUNG_PA_ADC S5PV210_PA_ADC #define SAMSUNG_PA_CFCON S5PV210_PA_CFCON #define SAMSUNG_PA_KEYPAD S5PV210_PA_KEYPAD diff --git a/arch/arm/mach-s5pv210/include/mach/system.h b/arch/arm/mach-s5pv210/include/mach/system.h deleted file mode 100644 index bf288ced860..00000000000 --- a/arch/arm/mach-s5pv210/include/mach/system.h +++ /dev/null @@ -1,21 +0,0 @@ -/* linux/arch/arm/mach-s5pv210/include/mach/system.h - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * S5PV210 - system support header - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H __FILE__ - -static void arch_idle(void) -{ - /* nothing here yet */ -} - -#endif /* __ASM_ARCH_SYSTEM_H */ diff --git a/arch/arm/mach-s5pv210/mach-aquila.c b/arch/arm/mach-s5pv210/mach-aquila.c index 5e734d025a6..a9ea64e0da0 100644 --- a/arch/arm/mach-s5pv210/mach-aquila.c +++ b/arch/arm/mach-s5pv210/mach-aquila.c @@ -616,6 +616,7 @@ static struct platform_device *aquila_devices[] __initdata = { &s5p_device_fimc0, &s5p_device_fimc1, &s5p_device_fimc2, + &s5p_device_fimc_md, &s5pv210_device_iis0, &wm8994_fixed_voltage0, &wm8994_fixed_voltage1, diff --git a/arch/arm/mach-s5pv210/mach-smdkc110.c b/arch/arm/mach-s5pv210/mach-smdkc110.c index b323983b2c5..dfc29236321 100644 --- a/arch/arm/mach-s5pv210/mach-smdkc110.c +++ b/arch/arm/mach-s5pv210/mach-smdkc110.c @@ -31,6 +31,7 @@ #include <plat/iic.h> #include <plat/pm.h> #include <plat/s5p-time.h> +#include <plat/mfc.h> #include "common.h" @@ -94,6 +95,13 @@ static struct platform_device *smdkc110_devices[] __initdata = { &s3c_device_i2c2, &s3c_device_rtc, &s3c_device_wdt, + &s5p_device_fimc0, + &s5p_device_fimc1, + &s5p_device_fimc2, + &s5p_device_fimc_md, + &s5p_device_mfc, + &s5p_device_mfc_l, + &s5p_device_mfc_r, }; static struct i2c_board_info smdkc110_i2c_devs0[] __initdata = { @@ -117,6 +125,11 @@ static void __init smdkc110_map_io(void) s5p_set_timer_source(S5P_PWM3, S5P_PWM4); } +static void __init smdkc110_reserve(void) +{ + s5p_mfc_reserve_mem(0x43000000, 8 << 20, 0x51000000, 8 << 20); +} + static void __init smdkc110_machine_init(void) { s3c_pm_init(); @@ -145,4 +158,5 @@ MACHINE_START(SMDKC110, "SMDKC110") .init_machine = smdkc110_machine_init, .timer = &s5p_timer, .restart = s5pv210_restart, + .reserve = &smdkc110_reserve, MACHINE_END diff --git a/arch/arm/mach-s5pv210/mach-smdkv210.c b/arch/arm/mach-s5pv210/mach-smdkv210.c index dff9ea7b5bb..b6c79f07d29 100644 --- a/arch/arm/mach-s5pv210/mach-smdkv210.c +++ b/arch/arm/mach-s5pv210/mach-smdkv210.c @@ -46,6 +46,7 @@ #include <plat/s5p-time.h> #include <plat/backlight.h> #include <plat/regs-fb-v4.h> +#include <plat/mfc.h> #include "common.h" @@ -223,6 +224,14 @@ static struct platform_device *smdkv210_devices[] __initdata = { &s3c_device_rtc, &s3c_device_ts, &s3c_device_wdt, + &s5p_device_fimc0, + &s5p_device_fimc1, + &s5p_device_fimc2, + &s5p_device_fimc_md, + &s5p_device_jpeg, + &s5p_device_mfc, + &s5p_device_mfc_l, + &s5p_device_mfc_r, &s5pv210_device_ac97, &s5pv210_device_iis0, &s5pv210_device_spdif, @@ -282,6 +291,11 @@ static void __init smdkv210_map_io(void) s5p_set_timer_source(S5P_PWM2, S5P_PWM4); } +static void __init smdkv210_reserve(void) +{ + s5p_mfc_reserve_mem(0x43000000, 8 << 20, 0x51000000, 8 << 20); +} + static void __init smdkv210_machine_init(void) { s3c_pm_init(); @@ -319,4 +333,5 @@ MACHINE_START(SMDKV210, "SMDKV210") .init_machine = smdkv210_machine_init, .timer = &s5p_timer, .restart = s5pv210_restart, + .reserve = &smdkv210_reserve, MACHINE_END diff --git a/arch/arm/mach-sa1100/include/mach/system.h b/arch/arm/mach-sa1100/include/mach/system.h deleted file mode 100644 index e17b208f76d..00000000000 --- a/arch/arm/mach-sa1100/include/mach/system.h +++ /dev/null @@ -1,9 +0,0 @@ -/* - * arch/arm/mach-sa1100/include/mach/system.h - * - * Copyright (c) 1999 Nicolas Pitre <nico@fluxnic.net> - */ -static inline void arch_idle(void) -{ - cpu_do_idle(); -} diff --git a/arch/arm/mach-shark/core.c b/arch/arm/mach-shark/core.c index a851c254ad6..6a2a7f2c255 100644 --- a/arch/arm/mach-shark/core.c +++ b/arch/arm/mach-shark/core.c @@ -149,10 +149,16 @@ static struct sys_timer shark_timer = { .init = shark_timer_init, }; +static void shark_init_early(void) +{ + disable_hlt(); +} + MACHINE_START(SHARK, "Shark") /* Maintainer: Alexander Schulz */ .atag_offset = 0x3000, .map_io = shark_map_io, + .init_early = shark_init_early, .init_irq = shark_init_irq, .timer = &shark_timer, .dma_zone_size = SZ_4M, diff --git a/arch/arm/mach-shark/include/mach/system.h b/arch/arm/mach-shark/include/mach/system.h deleted file mode 100644 index 1b2f2c5050a..00000000000 --- a/arch/arm/mach-shark/include/mach/system.h +++ /dev/null @@ -1,13 +0,0 @@ -/* - * arch/arm/mach-shark/include/mach/system.h - * - * by Alexander Schulz - */ -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H - -static inline void arch_idle(void) -{ -} - -#endif diff --git a/arch/arm/mach-shmobile/board-ag5evm.c b/arch/arm/mach-shmobile/board-ag5evm.c index eff8a96c75e..068b754bc34 100644 --- a/arch/arm/mach-shmobile/board-ag5evm.c +++ b/arch/arm/mach-shmobile/board-ag5evm.c @@ -30,6 +30,7 @@ #include <linux/serial_sci.h> #include <linux/smsc911x.h> #include <linux/gpio.h> +#include <linux/videodev2.h> #include <linux/input.h> #include <linux/input/sh_keysc.h> #include <linux/mmc/host.h> @@ -37,7 +38,6 @@ #include <linux/mmc/sh_mobile_sdhi.h> #include <linux/mfd/tmio.h> #include <linux/sh_clk.h> -#include <linux/dma-mapping.h> #include <video/sh_mobile_lcdc.h> #include <video/sh_mipi_dsi.h> #include <sound/sh_fsi.h> @@ -159,19 +159,12 @@ static struct resource sh_mmcif_resources[] = { }, }; -static struct sh_mmcif_dma sh_mmcif_dma = { - .chan_priv_rx = { - .slave_id = SHDMA_SLAVE_MMCIF_RX, - }, - .chan_priv_tx = { - .slave_id = SHDMA_SLAVE_MMCIF_TX, - }, -}; static struct sh_mmcif_plat_data sh_mmcif_platdata = { .sup_pclk = 0, .ocr = MMC_VDD_165_195, .caps = MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE, - .dma = &sh_mmcif_dma, + .slave_id_tx = SHDMA_SLAVE_MMCIF_TX, + .slave_id_rx = SHDMA_SLAVE_MMCIF_RX, }; static struct platform_device mmc_device = { @@ -321,12 +314,11 @@ static struct resource mipidsi0_resources[] = { }, }; -#define DSI0PHYCR 0xe615006c static int sh_mipi_set_dot_clock(struct platform_device *pdev, void __iomem *base, int enable) { - struct clk *pck; + struct clk *pck, *phy; int ret; pck = clk_get(&pdev->dev, "dsip_clk"); @@ -335,18 +327,27 @@ static int sh_mipi_set_dot_clock(struct platform_device *pdev, goto sh_mipi_set_dot_clock_pck_err; } + phy = clk_get(&pdev->dev, "dsiphy_clk"); + if (IS_ERR(phy)) { + ret = PTR_ERR(phy); + goto sh_mipi_set_dot_clock_phy_err; + } + if (enable) { clk_set_rate(pck, clk_round_rate(pck, 24000000)); - __raw_writel(0x2a809010, DSI0PHYCR); + clk_set_rate(phy, clk_round_rate(pck, 510000000)); clk_enable(pck); + clk_enable(phy); } else { clk_disable(pck); + clk_disable(phy); } ret = 0; + clk_put(phy); +sh_mipi_set_dot_clock_phy_err: clk_put(pck); - sh_mipi_set_dot_clock_pck_err: return ret; } diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c index 2ac08b29e27..cdbbf29fb71 100644 --- a/arch/arm/mach-shmobile/board-ap4evb.c +++ b/arch/arm/mach-shmobile/board-ap4evb.c @@ -295,15 +295,6 @@ static struct resource sh_mmcif_resources[] = { }, }; -static struct sh_mmcif_dma sh_mmcif_dma = { - .chan_priv_rx = { - .slave_id = SHDMA_SLAVE_MMCIF_RX, - }, - .chan_priv_tx = { - .slave_id = SHDMA_SLAVE_MMCIF_TX, - }, -}; - static struct sh_mmcif_plat_data sh_mmcif_plat = { .sup_pclk = 0, .ocr = MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34, @@ -311,7 +302,8 @@ static struct sh_mmcif_plat_data sh_mmcif_plat = { MMC_CAP_8_BIT_DATA | MMC_CAP_NEEDS_POLL, .get_cd = slot_cn7_get_cd, - .dma = &sh_mmcif_dma, + .slave_id_tx = SHDMA_SLAVE_MMCIF_TX, + .slave_id_rx = SHDMA_SLAVE_MMCIF_RX, }; static struct platform_device sh_mmcif_device = { diff --git a/arch/arm/mach-shmobile/board-kota2.c b/arch/arm/mach-shmobile/board-kota2.c index 857ceeec1bb..c8e7ca23fc0 100644 --- a/arch/arm/mach-shmobile/board-kota2.c +++ b/arch/arm/mach-shmobile/board-kota2.c @@ -143,11 +143,10 @@ static struct gpio_keys_button gpio_buttons[] = { static struct gpio_keys_platform_data gpio_key_info = { .buttons = gpio_buttons, .nbuttons = ARRAY_SIZE(gpio_buttons), - .poll_interval = 250, /* polled for now */ }; static struct platform_device gpio_keys_device = { - .name = "gpio-keys-polled", /* polled for now */ + .name = "gpio-keys", .id = -1, .dev = { .platform_data = &gpio_key_info, diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c index 28d6d1f9dad..b05a5c0d5b4 100644 --- a/arch/arm/mach-shmobile/board-mackerel.c +++ b/arch/arm/mach-shmobile/board-mackerel.c @@ -43,7 +43,6 @@ #include <linux/smsc911x.h> #include <linux/sh_intc.h> #include <linux/tca6416_keypad.h> -#include <linux/usb/r8a66597.h> #include <linux/usb/renesas_usbhs.h> #include <linux/dma-mapping.h> @@ -145,11 +144,6 @@ * 1-2 short | VBUS 5V | Host * open | external VBUS | Function * - * *1 - * CN31 is used as - * CONFIG_USB_R8A66597_HCD Host - * CONFIG_USB_RENESAS_USBHS Function - * * CAUTION * * renesas_usbhs driver can use external interrupt mode @@ -161,15 +155,6 @@ * mackerel can not use external interrupt (IRQ7-PORT167) mode on "USB0", * because Touchscreen is using IRQ7-PORT40. * It is impossible to use IRQ7 demux on this board. - * - * We can use external interrupt mode USB-Function on "USB1". - * USB1 can become Host by r8a66597, and become Function by renesas_usbhs. - * But don't select both drivers in same time. - * These uses same IRQ number for request_irq(), and aren't supporting - * IRQF_SHARED / IORESOURCE_IRQ_SHAREABLE. - * - * Actually these are old/new version of USB driver. - * This mean its register will be broken if it supports shared IRQ, */ /* @@ -208,6 +193,16 @@ */ /* + * FSI - AK4642 + * + * it needs amixer settings for playing + * + * amixer set "Headphone" on + * amixer set "HPOUTL Mixer DACH" on + * amixer set "HPOUTR Mixer DACH" on + */ + +/* * FIXME !! * * gpio_no_direction @@ -676,51 +671,16 @@ static struct platform_device usbhs0_device = { * Use J30 to select between Host and Function. This setting * can however not be detected by software. Hotplug of USBHS1 * is provided via IRQ8. + * + * Current USB1 works as "USB Host". + * - set J30 "short" + * + * If you want to use it as "USB gadget", + * - J30 "open" + * - modify usbhs1_get_id() USBHS_HOST -> USBHS_GADGET + * - add .get_vbus = usbhs_get_vbus in usbhs1_private */ #define IRQ8 evt2irq(0x0300) - -/* USBHS1 USB Host support via r8a66597_hcd */ -static void usb1_host_port_power(int port, int power) -{ - if (!power) /* only power-on is supported for now */ - return; - - /* set VBOUT/PWEN and EXTLP1 in DVSTCTR */ - __raw_writew(__raw_readw(0xE68B0008) | 0x600, 0xE68B0008); -} - -static struct r8a66597_platdata usb1_host_data = { - .on_chip = 1, - .port_power = usb1_host_port_power, -}; - -static struct resource usb1_host_resources[] = { - [0] = { - .name = "USBHS1", - .start = 0xe68b0000, - .end = 0xe68b00e6 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0x1ce0) /* USB1_USB1I0 */, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device usb1_host_device = { - .name = "r8a66597_hcd", - .id = 1, - .dev = { - .dma_mask = NULL, /* not use dma */ - .coherent_dma_mask = 0xffffffff, - .platform_data = &usb1_host_data, - }, - .num_resources = ARRAY_SIZE(usb1_host_resources), - .resource = usb1_host_resources, -}; - -/* USBHS1 USB Function support via renesas_usbhs */ - #define USB_PHY_MODE (1 << 4) #define USB_PHY_INT_EN ((1 << 3) | (1 << 2)) #define USB_PHY_ON (1 << 1) @@ -776,7 +736,7 @@ static void usbhs1_hardware_exit(struct platform_device *pdev) static int usbhs1_get_id(struct platform_device *pdev) { - return USBHS_GADGET; + return USBHS_HOST; } static u32 usbhs1_pipe_cfg[] = { @@ -807,7 +767,6 @@ static struct usbhs_private usbhs1_private = { .hardware_exit = usbhs1_hardware_exit, .get_id = usbhs1_get_id, .phy_reset = usbhs_phy_reset, - .get_vbus = usbhs_get_vbus, }, .driver_param = { .buswait_bwait = 4, @@ -1182,15 +1141,6 @@ static struct resource sh_mmcif_resources[] = { }, }; -static struct sh_mmcif_dma sh_mmcif_dma = { - .chan_priv_rx = { - .slave_id = SHDMA_SLAVE_MMCIF_RX, - }, - .chan_priv_tx = { - .slave_id = SHDMA_SLAVE_MMCIF_TX, - }, -}; - static struct sh_mmcif_plat_data sh_mmcif_plat = { .sup_pclk = 0, .ocr = MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34, @@ -1198,7 +1148,8 @@ static struct sh_mmcif_plat_data sh_mmcif_plat = { MMC_CAP_8_BIT_DATA | MMC_CAP_NEEDS_POLL, .get_cd = slot_cn7_get_cd, - .dma = &sh_mmcif_dma, + .slave_id_tx = SHDMA_SLAVE_MMCIF_TX, + .slave_id_rx = SHDMA_SLAVE_MMCIF_RX, }; static struct platform_device sh_mmcif_device = { @@ -1309,7 +1260,6 @@ static struct platform_device *mackerel_devices[] __initdata = { &nor_flash_device, &smc911x_device, &lcdc_device, - &usb1_host_device, &usbhs1_device, &usbhs0_device, &leds_device, @@ -1471,9 +1421,6 @@ static void __init mackerel_init(void) gpio_pull_down(GPIO_PORT167CR); /* VBUS0_1 pull down */ gpio_request(GPIO_FN_IDIN_1_113, NULL); - /* USB phy tweak to make the r8a66597_hcd host driver work */ - __raw_writew(0x8a0a, 0xe6058130); /* USBCR4 */ - /* enable FSI2 port A (ak4643) */ gpio_request(GPIO_FN_FSIAIBT, NULL); gpio_request(GPIO_FN_FSIAILR, NULL); diff --git a/arch/arm/mach-shmobile/clock-sh73a0.c b/arch/arm/mach-shmobile/clock-sh73a0.c index afbead6a6e1..7727cca6136 100644 --- a/arch/arm/mach-shmobile/clock-sh73a0.c +++ b/arch/arm/mach-shmobile/clock-sh73a0.c @@ -365,6 +365,114 @@ static struct clk div6_clks[DIV6_NR] = { dsi_parent, ARRAY_SIZE(dsi_parent), 12, 3), }; +/* DSI DIV */ +static unsigned long dsiphy_recalc(struct clk *clk) +{ + u32 value; + + value = __raw_readl(clk->mapping->base); + + /* FIXME */ + if (!(value & 0x000B8000)) + return clk->parent->rate; + + value &= 0x3f; + value += 1; + + if ((value < 12) || + (value > 33)) { + pr_err("DSIPHY has wrong value (%d)", value); + return 0; + } + + return clk->parent->rate / value; +} + +static long dsiphy_round_rate(struct clk *clk, unsigned long rate) +{ + return clk_rate_mult_range_round(clk, 12, 33, rate); +} + +static void dsiphy_disable(struct clk *clk) +{ + u32 value; + + value = __raw_readl(clk->mapping->base); + value &= ~0x000B8000; + + __raw_writel(value , clk->mapping->base); +} + +static int dsiphy_enable(struct clk *clk) +{ + u32 value; + int multi; + + value = __raw_readl(clk->mapping->base); + multi = (value & 0x3f) + 1; + + if ((multi < 12) || (multi > 33)) + return -EIO; + + __raw_writel(value | 0x000B8000, clk->mapping->base); + + return 0; +} + +static int dsiphy_set_rate(struct clk *clk, unsigned long rate) +{ + u32 value; + int idx; + + idx = rate / clk->parent->rate; + if ((idx < 12) || (idx > 33)) + return -EINVAL; + + idx += -1; + + value = __raw_readl(clk->mapping->base); + value = (value & ~0x3f) + idx; + + __raw_writel(value, clk->mapping->base); + + return 0; +} + +static struct clk_ops dsiphy_clk_ops = { + .recalc = dsiphy_recalc, + .round_rate = dsiphy_round_rate, + .set_rate = dsiphy_set_rate, + .enable = dsiphy_enable, + .disable = dsiphy_disable, +}; + +static struct clk_mapping dsi0phy_clk_mapping = { + .phys = DSI0PHYCR, + .len = 4, +}; + +static struct clk_mapping dsi1phy_clk_mapping = { + .phys = DSI1PHYCR, + .len = 4, +}; + +static struct clk dsi0phy_clk = { + .ops = &dsiphy_clk_ops, + .parent = &div6_clks[DIV6_DSI0P], /* late install */ + .mapping = &dsi0phy_clk_mapping, +}; + +static struct clk dsi1phy_clk = { + .ops = &dsiphy_clk_ops, + .parent = &div6_clks[DIV6_DSI1P], /* late install */ + .mapping = &dsi1phy_clk_mapping, +}; + +static struct clk *late_main_clks[] = { + &dsi0phy_clk, + &dsi1phy_clk, +}; + enum { MSTP001, MSTP129, MSTP128, MSTP127, MSTP126, MSTP125, MSTP118, MSTP116, MSTP100, MSTP219, @@ -429,6 +537,8 @@ static struct clk_lookup lookups[] = { CLKDEV_ICK_ID("dsit_clk", "sh-mipi-dsi.1", &div6_clks[DIV6_DSIT]), CLKDEV_ICK_ID("dsip_clk", "sh-mipi-dsi.0", &div6_clks[DIV6_DSI0P]), CLKDEV_ICK_ID("dsip_clk", "sh-mipi-dsi.1", &div6_clks[DIV6_DSI1P]), + CLKDEV_ICK_ID("dsiphy_clk", "sh-mipi-dsi.0", &dsi0phy_clk), + CLKDEV_ICK_ID("dsiphy_clk", "sh-mipi-dsi.1", &dsi1phy_clk), /* MSTP32 clocks */ CLKDEV_DEV_ID("i2c-sh_mobile.2", &mstp_clks[MSTP001]), /* I2C2 */ @@ -504,6 +614,9 @@ void __init sh73a0_clock_init(void) if (!ret) ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR); + for (k = 0; !ret && (k < ARRAY_SIZE(late_main_clks)); k++) + ret = clk_register(late_main_clks[k]); + clkdev_add_table(lookups, ARRAY_SIZE(lookups)); if (!ret) diff --git a/arch/arm/mach-shmobile/include/mach/sh73a0.h b/arch/arm/mach-shmobile/include/mach/sh73a0.h index 881d515a968..cad57578cee 100644 --- a/arch/arm/mach-shmobile/include/mach/sh73a0.h +++ b/arch/arm/mach-shmobile/include/mach/sh73a0.h @@ -515,8 +515,8 @@ enum { SHDMA_SLAVE_MMCIF_RX, }; -/* PINT interrupts are located at Linux IRQ 768 and up */ -#define SH73A0_PINT0_IRQ(irq) ((irq) + 768) -#define SH73A0_PINT1_IRQ(irq) ((irq) + 800) +/* PINT interrupts are located at Linux IRQ 800 and up */ +#define SH73A0_PINT0_IRQ(irq) ((irq) + 800) +#define SH73A0_PINT1_IRQ(irq) ((irq) + 832) #endif /* __ASM_SH73A0_H__ */ diff --git a/arch/arm/mach-shmobile/include/mach/system.h b/arch/arm/mach-shmobile/include/mach/system.h index 956ac18ddbf..3bbcb3fa077 100644 --- a/arch/arm/mach-shmobile/include/mach/system.h +++ b/arch/arm/mach-shmobile/include/mach/system.h @@ -1,11 +1,6 @@ #ifndef __ASM_ARCH_SYSTEM_H #define __ASM_ARCH_SYSTEM_H -static inline void arch_idle(void) -{ - cpu_do_idle(); -} - static inline void arch_reset(char mode, const char *cmd) { soft_restart(0); diff --git a/arch/arm/mach-shmobile/intc-sh73a0.c b/arch/arm/mach-shmobile/intc-sh73a0.c index 1eda6b0b69e..9857595eaa7 100644 --- a/arch/arm/mach-shmobile/intc-sh73a0.c +++ b/arch/arm/mach-shmobile/intc-sh73a0.c @@ -19,6 +19,7 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/interrupt.h> +#include <linux/module.h> #include <linux/irq.h> #include <linux/io.h> #include <linux/sh_intc.h> @@ -445,6 +446,7 @@ void __init sh73a0_init_irq(void) setup_irq(gic_spi(1 + k), &sh73a0_irq_pin_cascade[k]); n = intcs_evt2irq(to_intc_vect(gic_spi(1 + k))); + WARN_ON(irq_alloc_desc_at(n, numa_node_id()) != n); irq_set_chip_and_handler_name(n, &intca_gic_irq_chip, handle_level_irq, "level"); set_irq_flags(n, IRQF_VALID); /* yuck */ diff --git a/arch/arm/mach-shmobile/pfc-r8a7779.c b/arch/arm/mach-shmobile/pfc-r8a7779.c index 963532f2b2c..d14c9b04807 100644 --- a/arch/arm/mach-shmobile/pfc-r8a7779.c +++ b/arch/arm/mach-shmobile/pfc-r8a7779.c @@ -2120,7 +2120,7 @@ static struct pinmux_cfg_reg pinmux_config_regs[] = { FN_AUDATA3, 0, 0, 0 } }, { PINMUX_CFG_REG_VAR("IPSR4", 0xfffc0030, 32, - 3, 1, 1, 1, 1, 1, 1, 3, 3, 1, + 3, 1, 1, 1, 1, 1, 1, 3, 3, 1, 1, 1, 1, 1, 1, 3, 3, 3, 2) { /* IP4_31_29 [3] */ FN_DU1_DB0, FN_VI2_DATA4_VI2_B4, FN_SCL2_B, FN_SD3_DAT0, diff --git a/arch/arm/mach-shmobile/pfc-sh7372.c b/arch/arm/mach-shmobile/pfc-sh7372.c index 1bd6585a6ac..336093f9210 100644 --- a/arch/arm/mach-shmobile/pfc-sh7372.c +++ b/arch/arm/mach-shmobile/pfc-sh7372.c @@ -23,6 +23,7 @@ #include <linux/init.h> #include <linux/kernel.h> #include <linux/gpio.h> +#include <mach/irqs.h> #include <mach/sh7372.h> #define CPU_ALL_PORT(fn, pfx, sfx) \ @@ -1594,6 +1595,43 @@ static struct pinmux_data_reg pinmux_data_regs[] = { { }, }; +#define EXT_IRQ16L(n) evt2irq(0x200 + ((n) << 5)) +#define EXT_IRQ16H(n) evt2irq(0x3200 + (((n) - 16) << 5)) +static struct pinmux_irq pinmux_irqs[] = { + PINMUX_IRQ(EXT_IRQ16L(0), PORT6_FN0, PORT162_FN0), + PINMUX_IRQ(EXT_IRQ16L(1), PORT12_FN0), + PINMUX_IRQ(EXT_IRQ16L(2), PORT4_FN0, PORT5_FN0), + PINMUX_IRQ(EXT_IRQ16L(3), PORT8_FN0, PORT16_FN0), + PINMUX_IRQ(EXT_IRQ16L(4), PORT17_FN0, PORT163_FN0), + PINMUX_IRQ(EXT_IRQ16L(5), PORT18_FN0), + PINMUX_IRQ(EXT_IRQ16L(6), PORT39_FN0, PORT164_FN0), + PINMUX_IRQ(EXT_IRQ16L(7), PORT40_FN0, PORT167_FN0), + PINMUX_IRQ(EXT_IRQ16L(8), PORT41_FN0, PORT168_FN0), + PINMUX_IRQ(EXT_IRQ16L(9), PORT42_FN0, PORT169_FN0), + PINMUX_IRQ(EXT_IRQ16L(10), PORT65_FN0), + PINMUX_IRQ(EXT_IRQ16L(11), PORT67_FN0), + PINMUX_IRQ(EXT_IRQ16L(12), PORT80_FN0, PORT137_FN0), + PINMUX_IRQ(EXT_IRQ16L(13), PORT81_FN0, PORT145_FN0), + PINMUX_IRQ(EXT_IRQ16L(14), PORT82_FN0, PORT146_FN0), + PINMUX_IRQ(EXT_IRQ16L(15), PORT83_FN0, PORT147_FN0), + PINMUX_IRQ(EXT_IRQ16H(16), PORT84_FN0, PORT170_FN0), + PINMUX_IRQ(EXT_IRQ16H(17), PORT85_FN0), + PINMUX_IRQ(EXT_IRQ16H(18), PORT86_FN0), + PINMUX_IRQ(EXT_IRQ16H(19), PORT87_FN0), + PINMUX_IRQ(EXT_IRQ16H(20), PORT92_FN0), + PINMUX_IRQ(EXT_IRQ16H(21), PORT93_FN0), + PINMUX_IRQ(EXT_IRQ16H(22), PORT94_FN0), + PINMUX_IRQ(EXT_IRQ16H(23), PORT95_FN0), + PINMUX_IRQ(EXT_IRQ16H(24), PORT112_FN0), + PINMUX_IRQ(EXT_IRQ16H(25), PORT119_FN0), + PINMUX_IRQ(EXT_IRQ16H(26), PORT121_FN0, PORT172_FN0), + PINMUX_IRQ(EXT_IRQ16H(27), PORT122_FN0, PORT180_FN0), + PINMUX_IRQ(EXT_IRQ16H(28), PORT123_FN0, PORT181_FN0), + PINMUX_IRQ(EXT_IRQ16H(29), PORT129_FN0, PORT182_FN0), + PINMUX_IRQ(EXT_IRQ16H(30), PORT130_FN0, PORT183_FN0), + PINMUX_IRQ(EXT_IRQ16H(31), PORT138_FN0, PORT184_FN0), +}; + static struct pinmux_info sh7372_pinmux_info = { .name = "sh7372_pfc", .reserved_id = PINMUX_RESERVED, @@ -1614,6 +1652,9 @@ static struct pinmux_info sh7372_pinmux_info = { .gpio_data = pinmux_data, .gpio_data_size = ARRAY_SIZE(pinmux_data), + + .gpio_irq = pinmux_irqs, + .gpio_irq_size = ARRAY_SIZE(pinmux_irqs), }; void sh7372_pinmux_init(void) diff --git a/arch/arm/mach-shmobile/smp-sh73a0.c b/arch/arm/mach-shmobile/smp-sh73a0.c index 0d159d64a34..2d0d4212be4 100644 --- a/arch/arm/mach-shmobile/smp-sh73a0.c +++ b/arch/arm/mach-shmobile/smp-sh73a0.c @@ -80,7 +80,7 @@ int __cpuinit sh73a0_boot_secondary(unsigned int cpu) /* enable cache coherency */ modify_scu_cpu_psr(0, 3 << (cpu * 8)); - if (((__raw_readw(__io(PSTR)) >> (4 * cpu)) & 3) == 3) + if (((__raw_readl(__io(PSTR)) >> (4 * cpu)) & 3) == 3) __raw_writel(1 << cpu, __io(WUPCR)); /* wake up */ else __raw_writel(1 << cpu, __io(SRESCR)); /* reset */ diff --git a/arch/arm/mach-spear3xx/include/mach/system.h b/arch/arm/mach-spear3xx/include/mach/system.h deleted file mode 100644 index 92cee6335c9..00000000000 --- a/arch/arm/mach-spear3xx/include/mach/system.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * arch/arm/mach-spear3xx/include/mach/system.h - * - * SPEAr3xx Machine family specific architecture functions - * - * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar<viresh.kumar@st.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __MACH_SYSTEM_H -#define __MACH_SYSTEM_H - -#include <plat/system.h> - -#endif /* __MACH_SYSTEM_H */ diff --git a/arch/arm/mach-spear3xx/spear300.c b/arch/arm/mach-spear3xx/spear300.c index a5e46b4ade2..9da50e281e9 100644 --- a/arch/arm/mach-spear3xx/spear300.c +++ b/arch/arm/mach-spear3xx/spear300.c @@ -430,18 +430,8 @@ static struct pl061_platform_data gpio1_plat_data = { .irq_base = SPEAR300_GPIO1_INT_BASE, }; -struct amba_device spear300_gpio1_device = { - .dev = { - .init_name = "gpio1", - .platform_data = &gpio1_plat_data, - }, - .res = { - .start = SPEAR300_GPIO_BASE, - .end = SPEAR300_GPIO_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - .irq = {SPEAR300_VIRQ_GPIO1, NO_IRQ}, -}; +AMBA_APB_DEVICE(spear300_gpio1, "gpio1", 0, SPEAR300_GPIO_BASE, + {SPEAR300_VIRQ_GPIO1}, &gpio1_plat_data); /* spear300 routines */ void __init spear300_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs, diff --git a/arch/arm/mach-spear3xx/spear3xx.c b/arch/arm/mach-spear3xx/spear3xx.c index 10af45da86a..b1733c37f20 100644 --- a/arch/arm/mach-spear3xx/spear3xx.c +++ b/arch/arm/mach-spear3xx/spear3xx.c @@ -28,31 +28,12 @@ static struct pl061_platform_data gpio_plat_data = { .irq_base = SPEAR3XX_GPIO_INT_BASE, }; -struct amba_device spear3xx_gpio_device = { - .dev = { - .init_name = "gpio", - .platform_data = &gpio_plat_data, - }, - .res = { - .start = SPEAR3XX_ICM3_GPIO_BASE, - .end = SPEAR3XX_ICM3_GPIO_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - .irq = {SPEAR3XX_IRQ_BASIC_GPIO, NO_IRQ}, -}; +AMBA_APB_DEVICE(spear3xx_gpio, "gpio", 0, SPEAR3XX_ICM3_GPIO_BASE, + {SPEAR3XX_IRQ_BASIC_GPIO}, &gpio_plat_data); /* uart device registration */ -struct amba_device spear3xx_uart_device = { - .dev = { - .init_name = "uart", - }, - .res = { - .start = SPEAR3XX_ICM1_UART_BASE, - .end = SPEAR3XX_ICM1_UART_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - .irq = {SPEAR3XX_IRQ_UART, NO_IRQ}, -}; +AMBA_APB_DEVICE(spear3xx_uart, "uart", 0, SPEAR3XX_ICM1_UART_BASE, + {SPEAR3XX_IRQ_UART}, NULL); /* Do spear3xx familiy common initialization part here */ void __init spear3xx_init(void) diff --git a/arch/arm/mach-spear6xx/include/mach/system.h b/arch/arm/mach-spear6xx/include/mach/system.h deleted file mode 100644 index 0b1d2be81cf..00000000000 --- a/arch/arm/mach-spear6xx/include/mach/system.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * arch/arm/mach-spear6xx/include/mach/system.h - * - * SPEAr6xx Machine family specific architecture functions - * - * Copyright (C) 2009 ST Microelectronics - * Rajeev Kumar<rajeev-dlh.kumar@st.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __MACH_SYSTEM_H -#define __MACH_SYSTEM_H - -#include <plat/system.h> - -#endif /* __MACH_SYSTEM_H */ diff --git a/arch/arm/mach-spear6xx/spear6xx.c b/arch/arm/mach-spear6xx/spear6xx.c index e0f6628c8b2..b997b1b10ba 100644 --- a/arch/arm/mach-spear6xx/spear6xx.c +++ b/arch/arm/mach-spear6xx/spear6xx.c @@ -34,7 +34,7 @@ struct amba_device uart_device[] = { .end = SPEAR6XX_ICM1_UART0_BASE + SZ_4K - 1, .flags = IORESOURCE_MEM, }, - .irq = {IRQ_UART_0, NO_IRQ}, + .irq = {IRQ_UART_0}, }, { .dev = { .init_name = "uart1", @@ -44,7 +44,7 @@ struct amba_device uart_device[] = { .end = SPEAR6XX_ICM1_UART1_BASE + SZ_4K - 1, .flags = IORESOURCE_MEM, }, - .irq = {IRQ_UART_1, NO_IRQ}, + .irq = {IRQ_UART_1}, } }; @@ -73,7 +73,7 @@ struct amba_device gpio_device[] = { .end = SPEAR6XX_CPU_GPIO_BASE + SZ_4K - 1, .flags = IORESOURCE_MEM, }, - .irq = {IRQ_LOCAL_GPIO, NO_IRQ}, + .irq = {IRQ_LOCAL_GPIO}, }, { .dev = { .init_name = "gpio1", @@ -84,7 +84,7 @@ struct amba_device gpio_device[] = { .end = SPEAR6XX_ICM3_GPIO_BASE + SZ_4K - 1, .flags = IORESOURCE_MEM, }, - .irq = {IRQ_BASIC_GPIO, NO_IRQ}, + .irq = {IRQ_BASIC_GPIO}, }, { .dev = { .init_name = "gpio2", @@ -95,7 +95,7 @@ struct amba_device gpio_device[] = { .end = SPEAR6XX_ICM2_GPIO_BASE + SZ_4K - 1, .flags = IORESOURCE_MEM, }, - .irq = {IRQ_APPL_GPIO, NO_IRQ}, + .irq = {IRQ_APPL_GPIO}, } }; diff --git a/arch/arm/mach-tegra/board-dt-tegra20.c b/arch/arm/mach-tegra/board-dt-tegra20.c index 7a95e0bc4ab..e20b419d598 100644 --- a/arch/arm/mach-tegra/board-dt-tegra20.c +++ b/arch/arm/mach-tegra/board-dt-tegra20.c @@ -131,11 +131,7 @@ static void __init tegra_dt_init(void) } static const char *tegra20_dt_board_compat[] = { - "compulab,trimslice", - "nvidia,harmony", - "compal,paz00", - "nvidia,seaboard", - "nvidia,ventana", + "nvidia,tegra20", NULL }; diff --git a/arch/arm/mach-tegra/board-dt-tegra30.c b/arch/arm/mach-tegra/board-dt-tegra30.c index 3c197e2440b..6db4df28e6c 100644 --- a/arch/arm/mach-tegra/board-dt-tegra30.c +++ b/arch/arm/mach-tegra/board-dt-tegra30.c @@ -47,7 +47,7 @@ static void __init tegra30_dt_init(void) } static const char *tegra30_dt_board_compat[] = { - "nvidia,cardhu", + "nvidia,tegra30", NULL }; diff --git a/arch/arm/mach-tegra/board-harmony-power.c b/arch/arm/mach-tegra/board-harmony-power.c index 21d1285731b..c0298b3f7d6 100644 --- a/arch/arm/mach-tegra/board-harmony-power.c +++ b/arch/arm/mach-tegra/board-harmony-power.c @@ -36,13 +36,14 @@ static struct regulator_consumer_supply tps658621_ldo0_supply[] = { static struct regulator_init_data ldo0_data = { .constraints = { - .min_uV = 1250 * 1000, + .min_uV = 3300 * 1000, .max_uV = 3300 * 1000, .valid_modes_mask = (REGULATOR_MODE_NORMAL | REGULATOR_MODE_STANDBY), .valid_ops_mask = (REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS | REGULATOR_CHANGE_VOLTAGE), + .apply_uV = 1, }, .num_consumer_supplies = ARRAY_SIZE(tps658621_ldo0_supply), .consumer_supplies = tps658621_ldo0_supply, diff --git a/arch/arm/mach-tegra/common.c b/arch/arm/mach-tegra/common.c index a2eb90169ae..2db20da1d58 100644 --- a/arch/arm/mach-tegra/common.c +++ b/arch/arm/mach-tegra/common.c @@ -27,7 +27,6 @@ #include <asm/hardware/gic.h> #include <mach/iomap.h> -#include <mach/system.h> #include "board.h" #include "clock.h" @@ -96,6 +95,8 @@ static void __init tegra_init_cache(u32 tag_latency, u32 data_latency) #ifdef CONFIG_ARCH_TEGRA_2x_SOC void __init tegra20_init_early(void) { + disable_hlt(); /* idle WFI usage needs to be confirmed */ + tegra_init_fuse(); tegra2_init_clocks(); tegra_clk_init_from_table(tegra20_clk_init_table); diff --git a/arch/arm/mach-tegra/include/mach/system.h b/arch/arm/mach-tegra/include/mach/system.h deleted file mode 100644 index a312988bf6f..00000000000 --- a/arch/arm/mach-tegra/include/mach/system.h +++ /dev/null @@ -1,28 +0,0 @@ -/* - * arch/arm/mach-tegra/include/mach/system.h - * - * Copyright (C) 2010 Google, Inc. - * - * Author: - * Colin Cross <ccross@google.com> - * Erik Gilling <konkers@google.com> - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#ifndef __MACH_TEGRA_SYSTEM_H -#define __MACH_TEGRA_SYSTEM_H - -static inline void arch_idle(void) -{ -} - -#endif diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c index b4c6926a700..b9865605da0 100644 --- a/arch/arm/mach-u300/core.c +++ b/arch/arm/mach-u300/core.c @@ -94,19 +94,9 @@ static struct amba_pl011_data uart0_plat_data = { #endif }; -static struct amba_device uart0_device = { - .dev = { - .coherent_dma_mask = ~0, - .init_name = "uart0", /* Slow device at 0x3000 offset */ - .platform_data = &uart0_plat_data, - }, - .res = { - .start = U300_UART0_BASE, - .end = U300_UART0_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - .irq = { IRQ_U300_UART0, NO_IRQ }, -}; +/* Slow device at 0x3000 offset */ +static AMBA_APB_DEVICE(uart0, "uart0", 0, U300_UART0_BASE, + { IRQ_U300_UART0 }, &uart0_plat_data); /* The U335 have an additional UART1 on the APP CPU */ #ifdef CONFIG_MACH_U300_BS335 @@ -118,71 +108,28 @@ static struct amba_pl011_data uart1_plat_data = { #endif }; -static struct amba_device uart1_device = { - .dev = { - .coherent_dma_mask = ~0, - .init_name = "uart1", /* Fast device at 0x7000 offset */ - .platform_data = &uart1_plat_data, - }, - .res = { - .start = U300_UART1_BASE, - .end = U300_UART1_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - .irq = { IRQ_U300_UART1, NO_IRQ }, -}; +/* Fast device at 0x7000 offset */ +static AMBA_APB_DEVICE(uart1, "uart1", 0, U300_UART1_BASE, + { IRQ_U300_UART1 }, &uart1_plat_data); #endif -static struct amba_device pl172_device = { - .dev = { - .init_name = "pl172", /* AHB device at 0x4000 offset */ - .platform_data = NULL, - }, - .res = { - .start = U300_EMIF_CFG_BASE, - .end = U300_EMIF_CFG_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, -}; +/* AHB device at 0x4000 offset */ +static AMBA_APB_DEVICE(pl172, "pl172", 0, U300_EMIF_CFG_BASE, { }, NULL); /* * Everything within this next ifdef deals with external devices connected to * the APP SPI bus. */ -static struct amba_device pl022_device = { - .dev = { - .coherent_dma_mask = ~0, - .init_name = "pl022", /* Fast device at 0x6000 offset */ - }, - .res = { - .start = U300_SPI_BASE, - .end = U300_SPI_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - .irq = {IRQ_U300_SPI, NO_IRQ }, - /* - * This device has a DMA channel but the Linux driver does not use - * it currently. - */ -}; +/* Fast device at 0x6000 offset */ +static AMBA_APB_DEVICE(pl022, "pl022", 0, U300_SPI_BASE, + { IRQ_U300_SPI }, NULL); -static struct amba_device mmcsd_device = { - .dev = { - .init_name = "mmci", /* Fast device at 0x1000 offset */ - .platform_data = NULL, /* Added later */ - }, - .res = { - .start = U300_MMCSD_BASE, - .end = U300_MMCSD_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - .irq = {IRQ_U300_MMCSD_MCIINTR0, IRQ_U300_MMCSD_MCIINTR1 }, - /* - * This device has a DMA channel but the Linux driver does not use - * it currently. - */ -}; +/* Fast device at 0x1000 offset */ +#define U300_MMCSD_IRQS { IRQ_U300_MMCSD_MCIINTR0, IRQ_U300_MMCSD_MCIINTR1 } + +static AMBA_APB_DEVICE(mmcsd, "mmci", 0, U300_MMCSD_BASE, + U300_MMCSD_IRQS, NULL); /* * The order of device declaration may be important, since some devices diff --git a/arch/arm/mach-u300/include/mach/system.h b/arch/arm/mach-u300/include/mach/system.h deleted file mode 100644 index 574d46e3829..00000000000 --- a/arch/arm/mach-u300/include/mach/system.h +++ /dev/null @@ -1,14 +0,0 @@ -/* - * - * arch/arm/mach-u300/include/mach/system.h - * - * - * Copyright (C) 2007-2009 ST-Ericsson AB - * License terms: GNU General Public License (GPL) version 2 - * System shutdown and reset functions. - * Author: Linus Walleij <linus.walleij@stericsson.com> - */ -static inline void arch_idle(void) -{ - cpu_do_idle(); -} diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig index 52af00446a6..c59e8b892d6 100644 --- a/arch/arm/mach-ux500/Kconfig +++ b/arch/arm/mach-ux500/Kconfig @@ -5,7 +5,7 @@ config UX500_SOC_COMMON default y select ARM_GIC select HAS_MTU - select ARM_ERRATA_753970 + select PL310_ERRATA_753970 select ARM_ERRATA_754322 select ARM_ERRATA_764369 diff --git a/arch/arm/mach-ux500/devices-common.c b/arch/arm/mach-ux500/devices-common.c index c563e5418d8..898a64517b0 100644 --- a/arch/arm/mach-ux500/devices-common.c +++ b/arch/arm/mach-ux500/devices-common.c @@ -26,29 +26,22 @@ dbx500_add_amba_device(const char *name, resource_size_t base, struct amba_device *dev; int ret; - dev = kzalloc(sizeof *dev, GFP_KERNEL); + dev = amba_device_alloc(name, base, SZ_4K); if (!dev) return ERR_PTR(-ENOMEM); - dev->dev.init_name = name; - - dev->res.start = base; - dev->res.end = base + SZ_4K - 1; - dev->res.flags = IORESOURCE_MEM; - dev->dma_mask = DMA_BIT_MASK(32); dev->dev.coherent_dma_mask = DMA_BIT_MASK(32); dev->irq[0] = irq; - dev->irq[1] = NO_IRQ; dev->periphid = periphid; dev->dev.platform_data = pdata; - ret = amba_device_register(dev, &iomem_resource); + ret = amba_device_add(dev, &iomem_resource); if (ret) { - kfree(dev); + amba_device_put(dev); return ERR_PTR(ret); } diff --git a/arch/arm/mach-ux500/include/mach/system.h b/arch/arm/mach-ux500/include/mach/system.h deleted file mode 100644 index 258e5c919c2..00000000000 --- a/arch/arm/mach-ux500/include/mach/system.h +++ /dev/null @@ -1,20 +0,0 @@ -/* - * Copyright (C) 2009 ST-Ericsson. - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H - -static inline void arch_idle(void) -{ - /* - * This should do all the clock switching - * and wait for interrupt tricks - */ - cpu_do_idle(); -} - -#endif diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c index 02b7b9303f3..4f352e45be0 100644 --- a/arch/arm/mach-versatile/core.c +++ b/arch/arm/mach-versatile/core.c @@ -582,58 +582,58 @@ static struct pl022_ssp_controller ssp0_plat_data = { .num_chipselect = 1, }; -#define AACI_IRQ { IRQ_AACI, NO_IRQ } +#define AACI_IRQ { IRQ_AACI } #define MMCI0_IRQ { IRQ_MMCI0A,IRQ_SIC_MMCI0B } -#define KMI0_IRQ { IRQ_SIC_KMI0, NO_IRQ } -#define KMI1_IRQ { IRQ_SIC_KMI1, NO_IRQ } +#define KMI0_IRQ { IRQ_SIC_KMI0 } +#define KMI1_IRQ { IRQ_SIC_KMI1 } /* * These devices are connected directly to the multi-layer AHB switch */ -#define SMC_IRQ { NO_IRQ, NO_IRQ } -#define MPMC_IRQ { NO_IRQ, NO_IRQ } -#define CLCD_IRQ { IRQ_CLCDINT, NO_IRQ } -#define DMAC_IRQ { IRQ_DMAINT, NO_IRQ } +#define SMC_IRQ { } +#define MPMC_IRQ { } +#define CLCD_IRQ { IRQ_CLCDINT } +#define DMAC_IRQ { IRQ_DMAINT } /* * These devices are connected via the core APB bridge */ -#define SCTL_IRQ { NO_IRQ, NO_IRQ } -#define WATCHDOG_IRQ { IRQ_WDOGINT, NO_IRQ } -#define GPIO0_IRQ { IRQ_GPIOINT0, NO_IRQ } -#define GPIO1_IRQ { IRQ_GPIOINT1, NO_IRQ } -#define RTC_IRQ { IRQ_RTCINT, NO_IRQ } +#define SCTL_IRQ { } +#define WATCHDOG_IRQ { IRQ_WDOGINT } +#define GPIO0_IRQ { IRQ_GPIOINT0 } +#define GPIO1_IRQ { IRQ_GPIOINT1 } +#define RTC_IRQ { IRQ_RTCINT } /* * These devices are connected via the DMA APB bridge */ -#define SCI_IRQ { IRQ_SCIINT, NO_IRQ } -#define UART0_IRQ { IRQ_UARTINT0, NO_IRQ } -#define UART1_IRQ { IRQ_UARTINT1, NO_IRQ } -#define UART2_IRQ { IRQ_UARTINT2, NO_IRQ } -#define SSP_IRQ { IRQ_SSPINT, NO_IRQ } +#define SCI_IRQ { IRQ_SCIINT } +#define UART0_IRQ { IRQ_UARTINT0 } +#define UART1_IRQ { IRQ_UARTINT1 } +#define UART2_IRQ { IRQ_UARTINT2 } +#define SSP_IRQ { IRQ_SSPINT } /* FPGA Primecells */ -AMBA_DEVICE(aaci, "fpga:04", AACI, NULL); -AMBA_DEVICE(mmc0, "fpga:05", MMCI0, &mmc0_plat_data); -AMBA_DEVICE(kmi0, "fpga:06", KMI0, NULL); -AMBA_DEVICE(kmi1, "fpga:07", KMI1, NULL); +APB_DEVICE(aaci, "fpga:04", AACI, NULL); +APB_DEVICE(mmc0, "fpga:05", MMCI0, &mmc0_plat_data); +APB_DEVICE(kmi0, "fpga:06", KMI0, NULL); +APB_DEVICE(kmi1, "fpga:07", KMI1, NULL); /* DevChip Primecells */ -AMBA_DEVICE(smc, "dev:00", SMC, NULL); -AMBA_DEVICE(mpmc, "dev:10", MPMC, NULL); -AMBA_DEVICE(clcd, "dev:20", CLCD, &clcd_plat_data); -AMBA_DEVICE(dmac, "dev:30", DMAC, NULL); -AMBA_DEVICE(sctl, "dev:e0", SCTL, NULL); -AMBA_DEVICE(wdog, "dev:e1", WATCHDOG, NULL); -AMBA_DEVICE(gpio0, "dev:e4", GPIO0, &gpio0_plat_data); -AMBA_DEVICE(gpio1, "dev:e5", GPIO1, &gpio1_plat_data); -AMBA_DEVICE(rtc, "dev:e8", RTC, NULL); -AMBA_DEVICE(sci0, "dev:f0", SCI, NULL); -AMBA_DEVICE(uart0, "dev:f1", UART0, NULL); -AMBA_DEVICE(uart1, "dev:f2", UART1, NULL); -AMBA_DEVICE(uart2, "dev:f3", UART2, NULL); -AMBA_DEVICE(ssp0, "dev:f4", SSP, &ssp0_plat_data); +AHB_DEVICE(smc, "dev:00", SMC, NULL); +AHB_DEVICE(mpmc, "dev:10", MPMC, NULL); +AHB_DEVICE(clcd, "dev:20", CLCD, &clcd_plat_data); +AHB_DEVICE(dmac, "dev:30", DMAC, NULL); +APB_DEVICE(sctl, "dev:e0", SCTL, NULL); +APB_DEVICE(wdog, "dev:e1", WATCHDOG, NULL); +APB_DEVICE(gpio0, "dev:e4", GPIO0, &gpio0_plat_data); +APB_DEVICE(gpio1, "dev:e5", GPIO1, &gpio1_plat_data); +APB_DEVICE(rtc, "dev:e8", RTC, NULL); +APB_DEVICE(sci0, "dev:f0", SCI, NULL); +APB_DEVICE(uart0, "dev:f1", UART0, NULL); +APB_DEVICE(uart1, "dev:f2", UART1, NULL); +APB_DEVICE(uart2, "dev:f3", UART2, NULL); +APB_DEVICE(ssp0, "dev:f4", SSP, &ssp0_plat_data); static struct amba_device *amba_devs[] __initdata = { &dmac_device, diff --git a/arch/arm/mach-versatile/core.h b/arch/arm/mach-versatile/core.h index 2ef2f555f31..683e60776a8 100644 --- a/arch/arm/mach-versatile/core.h +++ b/arch/arm/mach-versatile/core.h @@ -36,20 +36,10 @@ extern unsigned int mmc_status(struct device *dev); extern struct of_dev_auxdata versatile_auxdata_lookup[]; #endif -#define AMBA_DEVICE(name,busid,base,plat) \ -static struct amba_device name##_device = { \ - .dev = { \ - .coherent_dma_mask = ~0, \ - .init_name = busid, \ - .platform_data = plat, \ - }, \ - .res = { \ - .start = VERSATILE_##base##_BASE, \ - .end = (VERSATILE_##base##_BASE) + SZ_4K - 1,\ - .flags = IORESOURCE_MEM, \ - }, \ - .dma_mask = ~0, \ - .irq = base##_IRQ, \ -} +#define APB_DEVICE(name, busid, base, plat) \ +static AMBA_APB_DEVICE(name, busid, 0, VERSATILE_##base##_BASE, base##_IRQ, plat) + +#define AHB_DEVICE(name, busid, base, plat) \ +static AMBA_AHB_DEVICE(name, busid, 0, VERSATILE_##base##_BASE, base##_IRQ, plat) #endif diff --git a/arch/arm/mach-versatile/include/mach/system.h b/arch/arm/mach-versatile/include/mach/system.h deleted file mode 100644 index f3fa347895f..00000000000 --- a/arch/arm/mach-versatile/include/mach/system.h +++ /dev/null @@ -1,33 +0,0 @@ -/* - * arch/arm/mach-versatile/include/mach/system.h - * - * Copyright (C) 2003 ARM Limited - * Copyright (C) 2000 Deep Blue Solutions Ltd - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H - -static inline void arch_idle(void) -{ - /* - * This should do all the clock switching - * and wait for interrupt tricks - */ - cpu_do_idle(); -} - -#endif diff --git a/arch/arm/mach-versatile/versatile_pb.c b/arch/arm/mach-versatile/versatile_pb.c index 9581c197500..19738331bd3 100644 --- a/arch/arm/mach-versatile/versatile_pb.c +++ b/arch/arm/mach-versatile/versatile_pb.c @@ -58,28 +58,28 @@ static struct pl061_platform_data gpio3_plat_data = { .irq_base = IRQ_GPIO3_START, }; -#define UART3_IRQ { IRQ_SIC_UART3, NO_IRQ } -#define SCI1_IRQ { IRQ_SIC_SCI3, NO_IRQ } +#define UART3_IRQ { IRQ_SIC_UART3 } +#define SCI1_IRQ { IRQ_SIC_SCI3 } #define MMCI1_IRQ { IRQ_MMCI1A, IRQ_SIC_MMCI1B } /* * These devices are connected via the core APB bridge */ -#define GPIO2_IRQ { IRQ_GPIOINT2, NO_IRQ } -#define GPIO3_IRQ { IRQ_GPIOINT3, NO_IRQ } +#define GPIO2_IRQ { IRQ_GPIOINT2 } +#define GPIO3_IRQ { IRQ_GPIOINT3 } /* * These devices are connected via the DMA APB bridge */ /* FPGA Primecells */ -AMBA_DEVICE(uart3, "fpga:09", UART3, NULL); -AMBA_DEVICE(sci1, "fpga:0a", SCI1, NULL); -AMBA_DEVICE(mmc1, "fpga:0b", MMCI1, &mmc1_plat_data); +APB_DEVICE(uart3, "fpga:09", UART3, NULL); +APB_DEVICE(sci1, "fpga:0a", SCI1, NULL); +APB_DEVICE(mmc1, "fpga:0b", MMCI1, &mmc1_plat_data); /* DevChip Primecells */ -AMBA_DEVICE(gpio2, "dev:e6", GPIO2, &gpio2_plat_data); -AMBA_DEVICE(gpio3, "dev:e7", GPIO3, &gpio3_plat_data); +APB_DEVICE(gpio2, "dev:e6", GPIO2, &gpio2_plat_data); +APB_DEVICE(gpio3, "dev:e7", GPIO3, &gpio3_plat_data); static struct amba_device *amba_devs[] __initdata = { &uart3_device, diff --git a/arch/arm/mach-vexpress/Kconfig b/arch/arm/mach-vexpress/Kconfig index 9b3d0fbaee7..88c3ba151e8 100644 --- a/arch/arm/mach-vexpress/Kconfig +++ b/arch/arm/mach-vexpress/Kconfig @@ -7,7 +7,7 @@ config ARCH_VEXPRESS_CA9X4 select ARM_GIC select ARM_ERRATA_720789 select ARM_ERRATA_751472 - select ARM_ERRATA_753970 + select PL310_ERRATA_753970 select HAVE_SMP select MIGHT_HAVE_CACHE_L2X0 diff --git a/arch/arm/mach-vexpress/core.h b/arch/arm/mach-vexpress/core.h index f4397159c17..9f0f2827c71 100644 --- a/arch/arm/mach-vexpress/core.h +++ b/arch/arm/mach-vexpress/core.h @@ -1,19 +1,2 @@ #define __MMIO_P2V(x) (((x) & 0xfffff) | (((x) & 0x0f000000) >> 4) | 0xf8000000) #define MMIO_P2V(x) ((void __iomem *)__MMIO_P2V(x)) - -#define AMBA_DEVICE(name,busid,base,plat) \ -struct amba_device name##_device = { \ - .dev = { \ - .coherent_dma_mask = ~0UL, \ - .init_name = busid, \ - .platform_data = plat, \ - }, \ - .res = { \ - .start = base, \ - .end = base + SZ_4K - 1, \ - .flags = IORESOURCE_MEM, \ - }, \ - .dma_mask = ~0UL, \ - .irq = IRQ_##base, \ - /* .dma = DMA_##base,*/ \ -} diff --git a/arch/arm/mach-vexpress/ct-ca9x4.c b/arch/arm/mach-vexpress/ct-ca9x4.c index b1e87c184e5..1b1d2e4892b 100644 --- a/arch/arm/mach-vexpress/ct-ca9x4.c +++ b/arch/arm/mach-vexpress/ct-ca9x4.c @@ -109,10 +109,10 @@ static struct clcd_board ct_ca9x4_clcd_data = { .remove = versatile_clcd_remove_dma, }; -static AMBA_DEVICE(clcd, "ct:clcd", CT_CA9X4_CLCDC, &ct_ca9x4_clcd_data); -static AMBA_DEVICE(dmc, "ct:dmc", CT_CA9X4_DMC, NULL); -static AMBA_DEVICE(smc, "ct:smc", CT_CA9X4_SMC, NULL); -static AMBA_DEVICE(gpio, "ct:gpio", CT_CA9X4_GPIO, NULL); +static AMBA_AHB_DEVICE(clcd, "ct:clcd", 0, CT_CA9X4_CLCDC, IRQ_CT_CA9X4_CLCDC, &ct_ca9x4_clcd_data); +static AMBA_APB_DEVICE(dmc, "ct:dmc", 0, CT_CA9X4_DMC, IRQ_CT_CA9X4_DMC, NULL); +static AMBA_APB_DEVICE(smc, "ct:smc", 0, CT_CA9X4_SMC, IRQ_CT_CA9X4_SMC, NULL); +static AMBA_APB_DEVICE(gpio, "ct:gpio", 0, CT_CA9X4_GPIO, IRQ_CT_CA9X4_GPIO, NULL); static struct amba_device *ct_ca9x4_amba_devs[] __initdata = { &clcd_device, diff --git a/arch/arm/mach-vexpress/include/mach/ct-ca9x4.h b/arch/arm/mach-vexpress/include/mach/ct-ca9x4.h index a34d3d4faae..a40468f3b93 100644 --- a/arch/arm/mach-vexpress/include/mach/ct-ca9x4.h +++ b/arch/arm/mach-vexpress/include/mach/ct-ca9x4.h @@ -35,7 +35,7 @@ * Interrupts. Those in {} are for AMBA devices */ #define IRQ_CT_CA9X4_CLCDC { 76 } -#define IRQ_CT_CA9X4_DMC { -1 } +#define IRQ_CT_CA9X4_DMC { 0 } #define IRQ_CT_CA9X4_SMC { 77, 78 } #define IRQ_CT_CA9X4_TIMER0 80 #define IRQ_CT_CA9X4_TIMER1 81 diff --git a/arch/arm/mach-vexpress/include/mach/system.h b/arch/arm/mach-vexpress/include/mach/system.h deleted file mode 100644 index f653a8e265b..00000000000 --- a/arch/arm/mach-vexpress/include/mach/system.h +++ /dev/null @@ -1,33 +0,0 @@ -/* - * arch/arm/mach-vexpress/include/mach/system.h - * - * Copyright (C) 2003 ARM Limited - * Copyright (C) 2000 Deep Blue Solutions Ltd - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H - -static inline void arch_idle(void) -{ - /* - * This should do all the clock switching - * and wait for interrupt tricks - */ - cpu_do_idle(); -} - -#endif diff --git a/arch/arm/mach-vexpress/v2m.c b/arch/arm/mach-vexpress/v2m.c index b4a28ca0e50..ad64f97a200 100644 --- a/arch/arm/mach-vexpress/v2m.c +++ b/arch/arm/mach-vexpress/v2m.c @@ -266,16 +266,16 @@ static struct mmci_platform_data v2m_mmci_data = { .status = v2m_mmci_status, }; -static AMBA_DEVICE(aaci, "mb:aaci", V2M_AACI, NULL); -static AMBA_DEVICE(mmci, "mb:mmci", V2M_MMCI, &v2m_mmci_data); -static AMBA_DEVICE(kmi0, "mb:kmi0", V2M_KMI0, NULL); -static AMBA_DEVICE(kmi1, "mb:kmi1", V2M_KMI1, NULL); -static AMBA_DEVICE(uart0, "mb:uart0", V2M_UART0, NULL); -static AMBA_DEVICE(uart1, "mb:uart1", V2M_UART1, NULL); -static AMBA_DEVICE(uart2, "mb:uart2", V2M_UART2, NULL); -static AMBA_DEVICE(uart3, "mb:uart3", V2M_UART3, NULL); -static AMBA_DEVICE(wdt, "mb:wdt", V2M_WDT, NULL); -static AMBA_DEVICE(rtc, "mb:rtc", V2M_RTC, NULL); +static AMBA_APB_DEVICE(aaci, "mb:aaci", 0, V2M_AACI, IRQ_V2M_AACI, NULL); +static AMBA_APB_DEVICE(mmci, "mb:mmci", 0, V2M_MMCI, IRQ_V2M_MMCI, &v2m_mmci_data); +static AMBA_APB_DEVICE(kmi0, "mb:kmi0", 0, V2M_KMI0, IRQ_V2M_KMI0, NULL); +static AMBA_APB_DEVICE(kmi1, "mb:kmi1", 0, V2M_KMI1, IRQ_V2M_KMI1, NULL); +static AMBA_APB_DEVICE(uart0, "mb:uart0", 0, V2M_UART0, IRQ_V2M_UART0, NULL); +static AMBA_APB_DEVICE(uart1, "mb:uart1", 0, V2M_UART1, IRQ_V2M_UART1, NULL); +static AMBA_APB_DEVICE(uart2, "mb:uart2", 0, V2M_UART2, IRQ_V2M_UART2, NULL); +static AMBA_APB_DEVICE(uart3, "mb:uart3", 0, V2M_UART3, IRQ_V2M_UART3, NULL); +static AMBA_APB_DEVICE(wdt, "mb:wdt", 0, V2M_WDT, IRQ_V2M_WDT, NULL); +static AMBA_APB_DEVICE(rtc, "mb:rtc", 0, V2M_RTC, IRQ_V2M_RTC, NULL); static struct amba_device *v2m_amba_devs[] __initdata = { &aaci_device, diff --git a/arch/arm/mach-vt8500/include/mach/system.h b/arch/arm/mach-vt8500/include/mach/system.h index d6c757eaf26..58fa8010ee6 100644 --- a/arch/arm/mach-vt8500/include/mach/system.h +++ b/arch/arm/mach-vt8500/include/mach/system.h @@ -7,11 +7,6 @@ /* PM Software Reset request register */ #define VT8500_PMSR_VIRT 0xf8130060 -static inline void arch_idle(void) -{ - cpu_do_idle(); -} - static inline void arch_reset(char mode, const char *cmd) { writel(1, VT8500_PMSR_VIRT); diff --git a/arch/arm/mach-w90x900/dev.c b/arch/arm/mach-w90x900/dev.c index 78110befb7a..db82568a998 100644 --- a/arch/arm/mach-w90x900/dev.c +++ b/arch/arm/mach-w90x900/dev.c @@ -530,6 +530,7 @@ static struct platform_device *nuc900_public_dev[] __initdata = { void __init nuc900_board_init(struct platform_device **device, int size) { + disable_hlt(); platform_add_devices(device, size); platform_add_devices(nuc900_public_dev, ARRAY_SIZE(nuc900_public_dev)); spi_register_board_info(nuc900_spi_board_info, diff --git a/arch/arm/mach-w90x900/include/mach/system.h b/arch/arm/mach-w90x900/include/mach/system.h deleted file mode 100644 index 2aaeb931161..00000000000 --- a/arch/arm/mach-w90x900/include/mach/system.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * arch/arm/mach-w90x900/include/mach/system.h - * - * Copyright (c) 2008 Nuvoton technology corporation - * All rights reserved. - * - * Wan ZongShun <mcuos.com@gmail.com> - * - * Based on arch/arm/mach-s3c2410/include/mach/system.h - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - */ -static void arch_idle(void) -{ -} diff --git a/arch/arm/mach-zynq/include/mach/system.h b/arch/arm/mach-zynq/include/mach/system.h deleted file mode 100644 index 8e88e0b8d2b..00000000000 --- a/arch/arm/mach-zynq/include/mach/system.h +++ /dev/null @@ -1,23 +0,0 @@ -/* arch/arm/mach-zynq/include/mach/system.h - * - * Copyright (C) 2011 Xilinx - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef __MACH_SYSTEM_H__ -#define __MACH_SYSTEM_H__ - -static inline void arch_idle(void) -{ - cpu_do_idle(); -} - -#endif diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index 1a3ca248816..7edef912163 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -631,7 +631,8 @@ comment "Processor Features" config ARM_LPAE bool "Support for the Large Physical Address Extension" - depends on MMU && CPU_V7 + depends on MMU && CPU_32v7 && !CPU_32v6 && !CPU_32v5 && \ + !CPU_32v4 && !CPU_32v3 help Say Y if you have an ARMv7 processor supporting the LPAE page table format and you would like to access memory beyond the diff --git a/arch/arm/mm/cache-v7.S b/arch/arm/mm/cache-v7.S index 7a24d39661f..a655d3da386 100644 --- a/arch/arm/mm/cache-v7.S +++ b/arch/arm/mm/cache-v7.S @@ -55,7 +55,7 @@ loop1: cmp r1, #2 @ see what cache we have at this level blt skip @ skip if no cache, or just i-cache #ifdef CONFIG_PREEMPT - save_and_disable_irqs r9 @ make cssr&csidr read atomic + save_and_disable_irqs_notrace r9 @ make cssr&csidr read atomic #endif mcr p15, 2, r10, c0, c0, 0 @ select current cache level in cssr isb @ isb to sych the new cssr&csidr diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index 0404ccbb8aa..f1c8486f750 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -230,9 +230,7 @@ __v7_setup: mcreq p15, 0, r10, c15, c0, 1 @ write diagnostic register #endif #ifdef CONFIG_ARM_ERRATA_743622 - teq r6, #0x20 @ present in r2p0 - teqne r6, #0x21 @ present in r2p1 - teqne r6, #0x22 @ present in r2p2 + teq r5, #0x00200000 @ only present in r2p* mrceq p15, 0, r10, c15, c0, 1 @ read diagnostic register orreq r10, r10, #1 << 6 @ set bit #6 mcreq p15, 0, r10, c15, c0, 1 @ write diagnostic register diff --git a/arch/arm/plat-mxc/include/mach/system.h b/arch/arm/plat-mxc/include/mach/system.h deleted file mode 100644 index 13ad0df2e86..00000000000 --- a/arch/arm/plat-mxc/include/mach/system.h +++ /dev/null @@ -1,25 +0,0 @@ -/* - * Copyright (C) 1999 ARM Limited - * Copyright (C) 2000 Deep Blue Solutions Ltd - * Copyright 2004-2008 Freescale Semiconductor, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef __ASM_ARCH_MXC_SYSTEM_H__ -#define __ASM_ARCH_MXC_SYSTEM_H__ - -static inline void arch_idle(void) -{ - cpu_do_idle(); -} - -#endif /* __ASM_ARCH_MXC_SYSTEM_H__ */ diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c index 06383b51e65..4de7d1e79e7 100644 --- a/arch/arm/plat-omap/common.c +++ b/arch/arm/plat-omap/common.c @@ -69,6 +69,7 @@ void __init omap_reserve(void) omap_vram_reserve_sdram_memblock(); omap_dsp_reserve_sdram_memblock(); omap_secure_ram_reserve_memblock(); + omap_barrier_reserve_memblock(); } void __init omap_init_consistent_dma_size(void) diff --git a/arch/arm/plat-omap/include/plat/board-ams-delta.h b/arch/arm/plat-omap/include/plat/board-ams-delta.h index 51b102dc906..ad6f865d1f1 100644 --- a/arch/arm/plat-omap/include/plat/board-ams-delta.h +++ b/arch/arm/plat-omap/include/plat/board-ams-delta.h @@ -28,33 +28,8 @@ #if defined (CONFIG_MACH_AMS_DELTA) -#define AMS_DELTA_LATCH1_PHYS 0x01000000 -#define AMS_DELTA_LATCH1_VIRT 0xEA000000 -#define AMS_DELTA_MODEM_PHYS 0x04000000 -#define AMS_DELTA_MODEM_VIRT 0xEB000000 -#define AMS_DELTA_LATCH2_PHYS 0x08000000 -#define AMS_DELTA_LATCH2_VIRT 0xEC000000 - -#define AMS_DELTA_LATCH1_LED_CAMERA 0x01 -#define AMS_DELTA_LATCH1_LED_ADVERT 0x02 -#define AMS_DELTA_LATCH1_LED_EMAIL 0x04 -#define AMS_DELTA_LATCH1_LED_HANDSFREE 0x08 -#define AMS_DELTA_LATCH1_LED_VOICEMAIL 0x10 -#define AMS_DELTA_LATCH1_LED_VOICE 0x20 - -#define AMS_DELTA_LATCH2_LCD_VBLEN 0x0001 -#define AMS_DELTA_LATCH2_LCD_NDISP 0x0002 -#define AMS_DELTA_LATCH2_NAND_NCE 0x0004 -#define AMS_DELTA_LATCH2_NAND_NRE 0x0008 -#define AMS_DELTA_LATCH2_NAND_NWP 0x0010 -#define AMS_DELTA_LATCH2_NAND_NWE 0x0020 -#define AMS_DELTA_LATCH2_NAND_ALE 0x0040 -#define AMS_DELTA_LATCH2_NAND_CLE 0x0080 -#define AMD_DELTA_LATCH2_KEYBRD_PWR 0x0100 -#define AMD_DELTA_LATCH2_KEYBRD_DATA 0x0200 #define AMD_DELTA_LATCH2_SCARD_RSTIN 0x0400 #define AMD_DELTA_LATCH2_SCARD_CMDVCC 0x0800 -#define AMS_DELTA_LATCH2_MODEM_NRESET 0x1000 #define AMS_DELTA_LATCH2_MODEM_CODEC 0x2000 #define AMS_DELTA_GPIO_PIN_KEYBRD_DATA 0 @@ -66,9 +41,29 @@ #define AMS_DELTA_GPIO_PIN_CONFIG 11 #define AMS_DELTA_GPIO_PIN_NAND_RB 12 +#define AMS_DELTA_GPIO_PIN_LCD_VBLEN 240 +#define AMS_DELTA_GPIO_PIN_LCD_NDISP 241 +#define AMS_DELTA_GPIO_PIN_NAND_NCE 242 +#define AMS_DELTA_GPIO_PIN_NAND_NRE 243 +#define AMS_DELTA_GPIO_PIN_NAND_NWP 244 +#define AMS_DELTA_GPIO_PIN_NAND_NWE 245 +#define AMS_DELTA_GPIO_PIN_NAND_ALE 246 +#define AMS_DELTA_GPIO_PIN_NAND_CLE 247 +#define AMS_DELTA_GPIO_PIN_KEYBRD_PWR 248 +#define AMS_DELTA_GPIO_PIN_KEYBRD_DATAOUT 249 +#define AMS_DELTA_GPIO_PIN_SCARD_RSTIN 250 +#define AMS_DELTA_GPIO_PIN_SCARD_CMDVCC 251 +#define AMS_DELTA_GPIO_PIN_MODEM_NRESET 252 +#define AMS_DELTA_GPIO_PIN_MODEM_CODEC 253 + +#define AMS_DELTA_LATCH2_GPIO_BASE AMS_DELTA_GPIO_PIN_LCD_VBLEN +#define AMS_DELTA_LATCH2_NGPIO 16 + #ifndef __ASSEMBLY__ -void ams_delta_latch1_write(u8 mask, u8 value); -void ams_delta_latch2_write(u16 mask, u16 value); +void ams_delta_latch_write(int base, int ngpio, u16 mask, u16 value); +#define ams_delta_latch2_write(mask, value) \ + ams_delta_latch_write(AMS_DELTA_LATCH2_GPIO_BASE, \ + AMS_DELTA_LATCH2_NGPIO, (mask), (value)) #endif #endif /* CONFIG_MACH_AMS_DELTA */ diff --git a/arch/arm/plat-omap/include/plat/irqs.h b/arch/arm/plat-omap/include/plat/irqs.h index 2efd6454bce..37bbbbb981b 100644 --- a/arch/arm/plat-omap/include/plat/irqs.h +++ b/arch/arm/plat-omap/include/plat/irqs.h @@ -428,8 +428,16 @@ #define OMAP_GPMC_NR_IRQS 8 #define OMAP_GPMC_IRQ_END (OMAP_GPMC_IRQ_BASE + OMAP_GPMC_NR_IRQS) +/* PRCM IRQ handler */ +#ifdef CONFIG_ARCH_OMAP2PLUS +#define OMAP_PRCM_IRQ_BASE (OMAP_GPMC_IRQ_END) +#define OMAP_PRCM_NR_IRQS 64 +#define OMAP_PRCM_IRQ_END (OMAP_PRCM_IRQ_BASE + OMAP_PRCM_NR_IRQS) +#else +#define OMAP_PRCM_IRQ_END OMAP_GPMC_IRQ_END +#endif -#define NR_IRQS OMAP_GPMC_IRQ_END +#define NR_IRQS OMAP_PRCM_IRQ_END #define OMAP_IRQ_BIT(irq) (1 << ((irq) % 32)) diff --git a/arch/arm/plat-omap/include/plat/omap-secure.h b/arch/arm/plat-omap/include/plat/omap-secure.h index 3047ff923a6..8c7994ce986 100644 --- a/arch/arm/plat-omap/include/plat/omap-secure.h +++ b/arch/arm/plat-omap/include/plat/omap-secure.h @@ -10,4 +10,10 @@ static inline void omap_secure_ram_reserve_memblock(void) { } #endif +#ifdef CONFIG_OMAP4_ERRATA_I688 +extern int omap_barrier_reserve_memblock(void); +#else +static inline void omap_barrier_reserve_memblock(void) +{ } +#endif #endif /* __OMAP_SECURE_H__ */ diff --git a/arch/arm/plat-omap/include/plat/system.h b/arch/arm/plat-omap/include/plat/system.h deleted file mode 100644 index 8e5ebd74b12..00000000000 --- a/arch/arm/plat-omap/include/plat/system.h +++ /dev/null @@ -1,15 +0,0 @@ -/* - * Copied from arch/arm/mach-sa1100/include/mach/system.h - * Copyright (c) 1999 Nicolas Pitre <nico@fluxnic.net> - */ -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H - -#include <asm/proc-fns.h> - -static inline void arch_idle(void) -{ - cpu_do_idle(); -} - -#endif diff --git a/arch/arm/plat-omap/include/plat/uncompress.h b/arch/arm/plat-omap/include/plat/uncompress.h index 6ee90495ca4..cc3f11ba7a9 100644 --- a/arch/arm/plat-omap/include/plat/uncompress.h +++ b/arch/arm/plat-omap/include/plat/uncompress.h @@ -160,6 +160,7 @@ static inline void __arch_decomp_setup(unsigned long arch_id) DEBUG_LL_OMAP3(3, igep0020); DEBUG_LL_OMAP3(3, igep0030); DEBUG_LL_OMAP3(3, nokia_rm680); + DEBUG_LL_OMAP3(3, nokia_rm696); DEBUG_LL_OMAP3(3, nokia_rx51); DEBUG_LL_OMAP3(3, omap3517evm); DEBUG_LL_OMAP3(3, omap3_beagle); diff --git a/arch/arm/plat-s3c24xx/cpu.c b/arch/arm/plat-s3c24xx/cpu.c index 21f1fda8b66..32a09931350 100644 --- a/arch/arm/plat-s3c24xx/cpu.c +++ b/arch/arm/plat-s3c24xx/cpu.c @@ -32,6 +32,7 @@ #include <linux/io.h> #include <mach/hardware.h> +#include <mach/regs-clock.h> #include <asm/irq.h> #include <asm/cacheflush.h> @@ -190,8 +191,34 @@ static unsigned long s3c24xx_read_idcode_v4(void) return __raw_readl(S3C2410_GSTATUS1); } +static void s3c24xx_default_idle(void) +{ + unsigned long tmp; + int i; + + /* idle the system by using the idle mode which will wait for an + * interrupt to happen before restarting the system. + */ + + /* Warning: going into idle state upsets jtag scanning */ + + __raw_writel(__raw_readl(S3C2410_CLKCON) | S3C2410_CLKCON_IDLE, + S3C2410_CLKCON); + + /* the samsung port seems to do a loop and then unset idle.. */ + for (i = 0; i < 50; i++) + tmp += __raw_readl(S3C2410_CLKCON); /* ensure loop not optimised out */ + + /* this bit is not cleared on re-start... */ + + __raw_writel(__raw_readl(S3C2410_CLKCON) & ~S3C2410_CLKCON_IDLE, + S3C2410_CLKCON); +} + void __init s3c24xx_init_io(struct map_desc *mach_desc, int size) { + arm_pm_idle = s3c24xx_default_idle; + /* initialise the io descriptors we need for initialisation */ iotable_init(mach_desc, size); iotable_init(s3c_iodesc, ARRAY_SIZE(s3c_iodesc)); diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c index 9fe35348e03..2bab4c99a23 100644 --- a/arch/arm/plat-s3c24xx/dma.c +++ b/arch/arm/plat-s3c24xx/dma.c @@ -1249,7 +1249,7 @@ static void s3c2410_dma_resume(void) struct s3c2410_dma_chan *cp = s3c2410_chans + dma_channels - 1; int channel; - for (channel = dma_channels - 1; channel >= 0; cp++, channel--) + for (channel = dma_channels - 1; channel >= 0; cp--, channel--) s3c2410_dma_resume_chan(cp); } diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c index f10768e988d..d21d744e4d9 100644 --- a/arch/arm/plat-samsung/devs.c +++ b/arch/arm/plat-samsung/devs.c @@ -1409,7 +1409,7 @@ void __init s5p_ehci_set_platdata(struct s5p_ehci_platdata *pd) #ifdef CONFIG_S3C_DEV_USB_HSOTG static struct resource s3c_usb_hsotg_resources[] = { - [0] = DEFINE_RES_MEM(S3C_PA_USB_HSOTG, SZ_16K), + [0] = DEFINE_RES_MEM(S3C_PA_USB_HSOTG, SZ_128K), [1] = DEFINE_RES_IRQ(IRQ_OTG), }; diff --git a/arch/arm/plat-spear/include/plat/system.h b/arch/arm/plat-spear/include/plat/system.h deleted file mode 100644 index 86c6f83b44c..00000000000 --- a/arch/arm/plat-spear/include/plat/system.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * arch/arm/plat-spear/include/plat/system.h - * - * SPEAr platform specific architecture functions - * - * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar<viresh.kumar@st.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __PLAT_SYSTEM_H -#define __PLAT_SYSTEM_H - -static inline void arch_idle(void) -{ - /* - * This should do all the clock switching - * and wait for interrupt tricks - */ - cpu_do_idle(); -} - -#endif /* __PLAT_SYSTEM_H */ diff --git a/arch/arm/plat-spear/time.c b/arch/arm/plat-spear/time.c index 0c77e429867..abb5bdecd50 100644 --- a/arch/arm/plat-spear/time.c +++ b/arch/arm/plat-spear/time.c @@ -145,11 +145,13 @@ static void clockevent_set_mode(enum clock_event_mode mode, static int clockevent_next_event(unsigned long cycles, struct clock_event_device *clk_event_dev) { - u16 val; + u16 val = readw(gpt_base + CR(CLKEVT)); + + if (val & CTRL_ENABLE) + writew(val & ~CTRL_ENABLE, gpt_base + CR(CLKEVT)); writew(cycles, gpt_base + LOAD(CLKEVT)); - val = readw(gpt_base + CR(CLKEVT)); val |= CTRL_ENABLE | CTRL_INT_ENABLE; writew(val, gpt_base + CR(CLKEVT)); diff --git a/arch/c6x/boot/Makefile b/arch/c6x/boot/Makefile index ecca820e604..6891257d514 100644 --- a/arch/c6x/boot/Makefile +++ b/arch/c6x/boot/Makefile @@ -13,7 +13,7 @@ obj-y += linked_dtb.o endif $(obj)/%.dtb: $(src)/dts/%.dts FORCE - $(call cmd,dtc) + $(call if_changed_dep,dtc) quiet_cmd_cp = CP $< $@$2 cmd_cp = cat $< >$@$2 || (rm -f $@ && echo false) diff --git a/arch/c6x/include/asm/processor.h b/arch/c6x/include/asm/processor.h index 8154c4ee8c9..77ecbded1f3 100644 --- a/arch/c6x/include/asm/processor.h +++ b/arch/c6x/include/asm/processor.h @@ -122,8 +122,8 @@ extern int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags); extern unsigned long get_wchan(struct task_struct *p); -#define KSTK_EIP(tsk) (task_pt_regs(task)->pc) -#define KSTK_ESP(tsk) (task_pt_regs(task)->sp) +#define KSTK_EIP(task) (task_pt_regs(task)->pc) +#define KSTK_ESP(task) (task_pt_regs(task)->sp) #define cpu_relax() do { } while (0) diff --git a/arch/m68k/include/asm/mcf_pgtable.h b/arch/m68k/include/asm/mcf_pgtable.h index 756bde4fb4f..3c793682e5d 100644 --- a/arch/m68k/include/asm/mcf_pgtable.h +++ b/arch/m68k/include/asm/mcf_pgtable.h @@ -78,7 +78,8 @@ | CF_PAGE_READABLE \ | CF_PAGE_WRITABLE \ | CF_PAGE_EXEC \ - | CF_PAGE_SYSTEM) + | CF_PAGE_SYSTEM \ + | CF_PAGE_SHARED) #define PAGE_COPY __pgprot(CF_PAGE_VALID \ | CF_PAGE_ACCESSED \ diff --git a/arch/m68k/mm/mcfmmu.c b/arch/m68k/mm/mcfmmu.c index babd5a97cdc..875b800ef0d 100644 --- a/arch/m68k/mm/mcfmmu.c +++ b/arch/m68k/mm/mcfmmu.c @@ -87,7 +87,7 @@ void __init paging_init(void) int cf_tlb_miss(struct pt_regs *regs, int write, int dtlb, int extension_word) { - unsigned long flags, mmuar; + unsigned long flags, mmuar, mmutr; struct mm_struct *mm; pgd_t *pgd; pmd_t *pmd; @@ -137,9 +137,10 @@ int cf_tlb_miss(struct pt_regs *regs, int write, int dtlb, int extension_word) if (!pte_dirty(*pte) && !KMAPAREA(mmuar)) set_pte(pte, pte_wrprotect(*pte)); - mmu_write(MMUTR, (mmuar & PAGE_MASK) | (asid << MMUTR_IDN) | - (((int)(pte->pte) & (int)CF_PAGE_MMUTR_MASK) - >> CF_PAGE_MMUTR_SHIFT) | MMUTR_V); + mmutr = (mmuar & PAGE_MASK) | (asid << MMUTR_IDN) | MMUTR_V; + if ((mmuar < TASK_UNMAPPED_BASE) || (mmuar >= TASK_SIZE)) + mmutr |= (pte->pte & CF_PAGE_MMUTR_MASK) >> CF_PAGE_MMUTR_SHIFT; + mmu_write(MMUTR, mmutr); mmu_write(MMUDR, (pte_val(*pte) & PAGE_MASK) | ((pte->pte) & CF_PAGE_MMUDR_MASK) | MMUDR_SZ_8KB | MMUDR_X); diff --git a/arch/m68k/platform/coldfire/entry.S b/arch/m68k/platform/coldfire/entry.S index 863889fc31c..281e38c2b6c 100644 --- a/arch/m68k/platform/coldfire/entry.S +++ b/arch/m68k/platform/coldfire/entry.S @@ -136,7 +136,7 @@ Luser_return: movel %sp,%d1 /* get thread_info pointer */ andl #-THREAD_SIZE,%d1 /* at base of kernel stack */ movel %d1,%a0 - movel %a0@(TINFO_FLAGS),%d1 /* get thread_info->flags */ + moveb %a0@(TINFO_FLAGS+3),%d1 /* thread_info->flags (low 8 bits) */ jne Lwork_to_do /* still work to do */ Lreturn: @@ -148,8 +148,6 @@ Lwork_to_do: btst #TIF_NEED_RESCHED,%d1 jne reschedule - /* GERG: do we need something here for TRACEing?? */ - Lsignal_return: subql #4,%sp /* dummy return address */ SAVE_SWITCH_STACK diff --git a/arch/mips/alchemy/common/time.c b/arch/mips/alchemy/common/time.c index 7da4d008148..a7193ae13a5 100644 --- a/arch/mips/alchemy/common/time.c +++ b/arch/mips/alchemy/common/time.c @@ -146,7 +146,7 @@ static int __init alchemy_time_init(unsigned int m2int) cd->shift = 32; cd->mult = div_sc(32768, NSEC_PER_SEC, cd->shift); cd->max_delta_ns = clockevent_delta2ns(0xffffffff, cd); - cd->min_delta_ns = clockevent_delta2ns(8, cd); /* ~0.25ms */ + cd->min_delta_ns = clockevent_delta2ns(9, cd); /* ~0.28ms */ clockevents_register_device(cd); setup_irq(m2int, &au1x_rtcmatch2_irqaction); diff --git a/arch/mips/ath79/dev-wmac.c b/arch/mips/ath79/dev-wmac.c index 24f546985b6..e2150705206 100644 --- a/arch/mips/ath79/dev-wmac.c +++ b/arch/mips/ath79/dev-wmac.c @@ -96,7 +96,7 @@ void __init ath79_register_wmac(u8 *cal_data) { if (soc_is_ar913x()) ar913x_wmac_setup(); - if (soc_is_ar933x()) + else if (soc_is_ar933x()) ar933x_wmac_setup(); else BUG(); diff --git a/arch/mips/configs/nlm_xlp_defconfig b/arch/mips/configs/nlm_xlp_defconfig index 4479fd669ac..28c6b276c21 100644 --- a/arch/mips/configs/nlm_xlp_defconfig +++ b/arch/mips/configs/nlm_xlp_defconfig @@ -8,7 +8,7 @@ CONFIG_HIGH_RES_TIMERS=y # CONFIG_SECCOMP is not set CONFIG_USE_OF=y CONFIG_EXPERIMENTAL=y -CONFIG_CROSS_COMPILE="mips-linux-gnu-" +CONFIG_CROSS_COMPILE="" # CONFIG_LOCALVERSION_AUTO is not set CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y @@ -22,7 +22,7 @@ CONFIG_AUDIT=y CONFIG_CGROUPS=y CONFIG_NAMESPACES=y CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="usr/dev_file_list usr/rootfs.xlp" +CONFIG_INITRAMFS_SOURCE="" CONFIG_RD_BZIP2=y CONFIG_RD_LZMA=y CONFIG_INITRAMFS_COMPRESSION_LZMA=y diff --git a/arch/mips/configs/nlm_xlr_defconfig b/arch/mips/configs/nlm_xlr_defconfig index 7c68666fdd6..d0b857d98c9 100644 --- a/arch/mips/configs/nlm_xlr_defconfig +++ b/arch/mips/configs/nlm_xlr_defconfig @@ -8,7 +8,7 @@ CONFIG_HIGH_RES_TIMERS=y CONFIG_PREEMPT_VOLUNTARY=y CONFIG_KEXEC=y CONFIG_EXPERIMENTAL=y -CONFIG_CROSS_COMPILE="mips-linux-gnu-" +CONFIG_CROSS_COMPILE="" # CONFIG_LOCALVERSION_AUTO is not set CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y @@ -22,7 +22,7 @@ CONFIG_AUDIT=y CONFIG_NAMESPACES=y CONFIG_SCHED_AUTOGROUP=y CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="usr/dev_file_list usr/rootfs.xlr" +CONFIG_INITRAMFS_SOURCE="" CONFIG_RD_BZIP2=y CONFIG_RD_LZMA=y CONFIG_INITRAMFS_COMPRESSION_GZIP=y diff --git a/arch/mips/configs/powertv_defconfig b/arch/mips/configs/powertv_defconfig index 3b0b6e8c853..7fda0ce5f69 100644 --- a/arch/mips/configs/powertv_defconfig +++ b/arch/mips/configs/powertv_defconfig @@ -6,7 +6,7 @@ CONFIG_HZ_1000=y CONFIG_PREEMPT=y # CONFIG_SECCOMP is not set CONFIG_EXPERIMENTAL=y -CONFIG_CROSS_COMPILE="mips-linux-" +CONFIG_CROSS_COMPILE="" # CONFIG_SWAP is not set CONFIG_SYSVIPC=y CONFIG_LOG_BUF_SHIFT=16 diff --git a/arch/mips/include/asm/mach-au1x00/gpio-au1300.h b/arch/mips/include/asm/mach-au1x00/gpio-au1300.h index 556e1be20bf..fb9975c74c5 100644 --- a/arch/mips/include/asm/mach-au1x00/gpio-au1300.h +++ b/arch/mips/include/asm/mach-au1x00/gpio-au1300.h @@ -11,6 +11,9 @@ #include <asm/io.h> #include <asm/mach-au1x00/au1000.h> +struct gpio; +struct gpio_chip; + /* with the current GPIC design, up to 128 GPIOs are possible. * The only implementation so far is in the Au1300, which has 75 externally * available GPIOs. @@ -203,7 +206,22 @@ static inline int gpio_request(unsigned int gpio, const char *label) return 0; } -static inline void gpio_free(unsigned int gpio) +static inline int gpio_request_one(unsigned gpio, + unsigned long flags, const char *label) +{ + return 0; +} + +static inline int gpio_request_array(struct gpio *array, size_t num) +{ + return 0; +} + +static inline void gpio_free(unsigned gpio) +{ +} + +static inline void gpio_free_array(struct gpio *array, size_t num) { } diff --git a/arch/mips/include/asm/page.h b/arch/mips/include/asm/page.h index d41790928c6..da9bd7d270d 100644 --- a/arch/mips/include/asm/page.h +++ b/arch/mips/include/asm/page.h @@ -39,9 +39,6 @@ #define HPAGE_MASK (~(HPAGE_SIZE - 1)) #define HUGETLB_PAGE_ORDER (HPAGE_SHIFT - PAGE_SHIFT) #else /* !CONFIG_HUGETLB_PAGE */ -# ifndef BUILD_BUG -# define BUILD_BUG() do { extern void __build_bug(void); __build_bug(); } while (0) -# endif #define HPAGE_SHIFT ({BUILD_BUG(); 0; }) #define HPAGE_SIZE ({BUILD_BUG(); 0; }) #define HPAGE_MASK ({BUILD_BUG(); 0; }) diff --git a/arch/mips/kernel/smp-bmips.c b/arch/mips/kernel/smp-bmips.c index 58fe71afd87..d5e950ab852 100644 --- a/arch/mips/kernel/smp-bmips.c +++ b/arch/mips/kernel/smp-bmips.c @@ -8,7 +8,6 @@ * SMP support for BMIPS */ -#include <linux/version.h> #include <linux/init.h> #include <linux/sched.h> #include <linux/mm.h> diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c index cc4a3f120f5..d79ae5437b5 100644 --- a/arch/mips/kernel/traps.c +++ b/arch/mips/kernel/traps.c @@ -1135,7 +1135,7 @@ asmlinkage void do_mt(struct pt_regs *regs) printk(KERN_DEBUG "YIELD Scheduler Exception\n"); break; case 5: - printk(KERN_DEBUG "Gating Storage Schedulier Exception\n"); + printk(KERN_DEBUG "Gating Storage Scheduler Exception\n"); break; default: printk(KERN_DEBUG "*** UNKNOWN THREAD EXCEPTION %d ***\n", diff --git a/arch/mips/kernel/vmlinux.lds.S b/arch/mips/kernel/vmlinux.lds.S index a81176f44c7..924da5eb703 100644 --- a/arch/mips/kernel/vmlinux.lds.S +++ b/arch/mips/kernel/vmlinux.lds.S @@ -69,7 +69,6 @@ SECTIONS RODATA /* writeable */ - _sdata = .; /* Start of data section */ .data : { /* Data */ . = . + DATAOFFSET; /* for CONFIG_MAPPED_KERNEL */ diff --git a/arch/mips/mm/fault.c b/arch/mips/mm/fault.c index 937cf336816..69ebd586d7f 100644 --- a/arch/mips/mm/fault.c +++ b/arch/mips/mm/fault.c @@ -42,6 +42,8 @@ asmlinkage void __kprobes do_page_fault(struct pt_regs *regs, unsigned long writ const int field = sizeof(unsigned long) * 2; siginfo_t info; int fault; + unsigned int flags = FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE | + (write ? FAULT_FLAG_WRITE : 0); #if 0 printk("Cpu%d[%s:%d:%0*lx:%ld:%0*lx]\n", raw_smp_processor_id(), @@ -91,6 +93,7 @@ asmlinkage void __kprobes do_page_fault(struct pt_regs *regs, unsigned long writ if (in_atomic() || !mm) goto bad_area_nosemaphore; +retry: down_read(&mm->mmap_sem); vma = find_vma(mm, address); if (!vma) @@ -144,7 +147,11 @@ good_area: * make sure we exit gracefully rather than endlessly redo * the fault. */ - fault = handle_mm_fault(mm, vma, address, write ? FAULT_FLAG_WRITE : 0); + fault = handle_mm_fault(mm, vma, address, flags); + + if ((fault & VM_FAULT_RETRY) && fatal_signal_pending(current)) + return; + perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS, 1, regs, address); if (unlikely(fault & VM_FAULT_ERROR)) { if (fault & VM_FAULT_OOM) @@ -153,12 +160,27 @@ good_area: goto do_sigbus; BUG(); } - if (fault & VM_FAULT_MAJOR) { - perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, 1, regs, address); - tsk->maj_flt++; - } else { - perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MIN, 1, regs, address); - tsk->min_flt++; + if (flags & FAULT_FLAG_ALLOW_RETRY) { + if (fault & VM_FAULT_MAJOR) { + perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, 1, + regs, address); + tsk->maj_flt++; + } else { + perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MIN, 1, + regs, address); + tsk->min_flt++; + } + if (fault & VM_FAULT_RETRY) { + flags &= ~FAULT_FLAG_ALLOW_RETRY; + + /* + * No need to up_read(&mm->mmap_sem) as we would + * have already released it in __lock_page_or_retry + * in mm/filemap.c. + */ + + goto retry; + } } up_read(&mm->mmap_sem); diff --git a/arch/mips/pci/pci.c b/arch/mips/pci/pci.c index aec2b111d35..15521505ebe 100644 --- a/arch/mips/pci/pci.c +++ b/arch/mips/pci/pci.c @@ -279,7 +279,6 @@ void __devinit pcibios_fixup_bus(struct pci_bus *bus) { /* Propagate hose info into the subordinate devices. */ - struct list_head *ln; struct pci_dev *dev = bus->self; if (pci_probe_only && dev && @@ -288,9 +287,7 @@ void __devinit pcibios_fixup_bus(struct pci_bus *bus) pcibios_fixup_device_resources(dev, bus); } - for (ln = bus->devices.next; ln != &bus->devices; ln = ln->next) { - dev = pci_dev_b(ln); - + list_for_each_entry(dev, &bus->devices, bus_list) { if ((dev->class >> 8) != PCI_CLASS_BRIDGE_PCI) pcibios_fixup_device_resources(dev, bus); } diff --git a/arch/mips/pmc-sierra/yosemite/ht-irq.c b/arch/mips/pmc-sierra/yosemite/ht-irq.c index 86b98e98fb4..62ead6601c6 100644 --- a/arch/mips/pmc-sierra/yosemite/ht-irq.c +++ b/arch/mips/pmc-sierra/yosemite/ht-irq.c @@ -35,16 +35,6 @@ */ void __init titan_ht_pcibios_fixup_bus(struct pci_bus *bus) { - struct pci_bus *current_bus = bus; - struct pci_dev *devices; - struct list_head *devices_link; - - list_for_each(devices_link, &(current_bus->devices)) { - devices = pci_dev_b(devices_link); - if (devices == NULL) - continue; - } - /* * PLX and SPKT related changes go here */ diff --git a/arch/mips/txx9/generic/7segled.c b/arch/mips/txx9/generic/7segled.c index 8e93b212252..4642f56e70e 100644 --- a/arch/mips/txx9/generic/7segled.c +++ b/arch/mips/txx9/generic/7segled.c @@ -102,7 +102,7 @@ static int __init tx_7segled_init_sysfs(void) break; } dev->id = i; - dev->dev = &tx_7segled_subsys; + dev->bus = &tx_7segled_subsys; error = device_register(dev); if (!error) { device_create_file(dev, &dev_attr_ascii); diff --git a/arch/openrisc/include/asm/ptrace.h b/arch/openrisc/include/asm/ptrace.h index 054537c5f9c..e612ce4512c 100644 --- a/arch/openrisc/include/asm/ptrace.h +++ b/arch/openrisc/include/asm/ptrace.h @@ -77,7 +77,6 @@ struct pt_regs { long syscallno; /* Syscall number (used by strace) */ long dummy; /* Cheap alignment fix */ }; -#endif /* __ASSEMBLY__ */ /* TODO: Rename this to REDZONE because that's what it is */ #define STACK_FRAME_OVERHEAD 128 /* size of minimum stack frame */ @@ -87,6 +86,13 @@ struct pt_regs { #define user_stack_pointer(regs) ((unsigned long)(regs)->sp) #define profile_pc(regs) instruction_pointer(regs) +static inline long regs_return_value(struct pt_regs *regs) +{ + return regs->gpr[11]; +} + +#endif /* __ASSEMBLY__ */ + /* * Offsets used by 'ptrace' system call interface. */ diff --git a/arch/openrisc/kernel/init_task.c b/arch/openrisc/kernel/init_task.c index 45744a38492..ca534082d5f 100644 --- a/arch/openrisc/kernel/init_task.c +++ b/arch/openrisc/kernel/init_task.c @@ -17,6 +17,7 @@ #include <linux/init_task.h> #include <linux/mqueue.h> +#include <linux/export.h> static struct signal_struct init_signals = INIT_SIGNALS(init_signals); static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand); diff --git a/arch/openrisc/kernel/irq.c b/arch/openrisc/kernel/irq.c index 59b30233833..4bfead22095 100644 --- a/arch/openrisc/kernel/irq.c +++ b/arch/openrisc/kernel/irq.c @@ -23,6 +23,7 @@ #include <linux/irq.h> #include <linux/seq_file.h> #include <linux/kernel_stat.h> +#include <linux/export.h> #include <linux/irqflags.h> diff --git a/arch/openrisc/kernel/ptrace.c b/arch/openrisc/kernel/ptrace.c index 656b94beab8..7259047d5f9 100644 --- a/arch/openrisc/kernel/ptrace.c +++ b/arch/openrisc/kernel/ptrace.c @@ -188,11 +188,9 @@ asmlinkage long do_syscall_trace_enter(struct pt_regs *regs) */ ret = -1L; - /* Are these regs right??? */ - if (unlikely(current->audit_context)) - audit_syscall_entry(audit_arch(), regs->syscallno, - regs->gpr[3], regs->gpr[4], - regs->gpr[5], regs->gpr[6]); + audit_syscall_entry(audit_arch(), regs->syscallno, + regs->gpr[3], regs->gpr[4], + regs->gpr[5], regs->gpr[6]); return ret ? : regs->syscallno; } @@ -201,9 +199,7 @@ asmlinkage void do_syscall_trace_leave(struct pt_regs *regs) { int step; - if (unlikely(current->audit_context)) - audit_syscall_exit(AUDITSC_RESULT(regs->gpr[11]), - regs->gpr[11]); + audit_syscall_exit(regs); step = test_thread_flag(TIF_SINGLESTEP); if (step || test_thread_flag(TIF_SYSCALL_TRACE)) diff --git a/arch/parisc/Makefile b/arch/parisc/Makefile index 55cca1dac43..19ab7b2ea1c 100644 --- a/arch/parisc/Makefile +++ b/arch/parisc/Makefile @@ -31,7 +31,11 @@ ifdef CONFIG_64BIT UTS_MACHINE := parisc64 CHECKFLAGS += -D__LP64__=1 -m64 WIDTH := 64 + +# FIXME: if no default set, should really try to locate dynamically +ifeq ($(CROSS_COMPILE),) CROSS_COMPILE := hppa64-linux-gnu- +endif else # 32-bit WIDTH := endif diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S index 4f80cf1ce77..3e57a00b8cb 100644 --- a/arch/powerpc/kernel/entry_32.S +++ b/arch/powerpc/kernel/entry_32.S @@ -1213,7 +1213,7 @@ do_user_signal: /* r10 contains MSR_KERNEL here */ stw r3,_TRAP(r1) 2: addi r3,r1,STACK_FRAME_OVERHEAD mr r4,r9 - bl do_signal + bl do_notify_resume REST_NVGPRS(r1) b recheck diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S index d834425186a..866462cbe2d 100644 --- a/arch/powerpc/kernel/entry_64.S +++ b/arch/powerpc/kernel/entry_64.S @@ -751,12 +751,16 @@ user_work: andi. r0,r4,_TIF_NEED_RESCHED beq 1f + li r5,1 + TRACE_AND_RESTORE_IRQ(r5); bl .schedule b .ret_from_except_lite 1: bl .save_nvgprs + li r5,1 + TRACE_AND_RESTORE_IRQ(r5); addi r3,r1,STACK_FRAME_OVERHEAD - bl .do_signal + bl .do_notify_resume b .ret_from_except unrecov_restore: diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S index 3844ca7c509..15c5a4f6de0 100644 --- a/arch/powerpc/kernel/exceptions-64s.S +++ b/arch/powerpc/kernel/exceptions-64s.S @@ -774,8 +774,8 @@ alignment_common: program_check_common: EXCEPTION_PROLOG_COMMON(0x700, PACA_EXGEN) bl .save_nvgprs - addi r3,r1,STACK_FRAME_OVERHEAD DISABLE_INTS + addi r3,r1,STACK_FRAME_OVERHEAD bl .program_check_exception b .ret_from_except diff --git a/arch/powerpc/kernel/signal.c b/arch/powerpc/kernel/signal.c index 2300426e531..ac6e437b102 100644 --- a/arch/powerpc/kernel/signal.c +++ b/arch/powerpc/kernel/signal.c @@ -11,6 +11,7 @@ #include <linux/tracehook.h> #include <linux/signal.h> +#include <linux/key.h> #include <asm/hw_breakpoint.h> #include <asm/uaccess.h> #include <asm/unistd.h> @@ -113,8 +114,9 @@ static void check_syscall_restart(struct pt_regs *regs, struct k_sigaction *ka, } } -static int do_signal_pending(sigset_t *oldset, struct pt_regs *regs) +static int do_signal(struct pt_regs *regs) { + sigset_t *oldset; siginfo_t info; int signr; struct k_sigaction ka; @@ -123,7 +125,7 @@ static int do_signal_pending(sigset_t *oldset, struct pt_regs *regs) if (current_thread_info()->local_flags & _TLF_RESTORE_SIGMASK) oldset = ¤t->saved_sigmask; - else if (!oldset) + else oldset = ¤t->blocked; signr = get_signal_to_deliver(&info, &ka, regs, NULL); @@ -191,14 +193,16 @@ static int do_signal_pending(sigset_t *oldset, struct pt_regs *regs) return ret; } -void do_signal(struct pt_regs *regs, unsigned long thread_info_flags) +void do_notify_resume(struct pt_regs *regs, unsigned long thread_info_flags) { if (thread_info_flags & _TIF_SIGPENDING) - do_signal_pending(NULL, regs); + do_signal(regs); if (thread_info_flags & _TIF_NOTIFY_RESUME) { clear_thread_flag(TIF_NOTIFY_RESUME); tracehook_notify_resume(regs); + if (current->replacement_session_keyring) + key_replace_session_keyring(); } } diff --git a/arch/powerpc/kernel/signal.h b/arch/powerpc/kernel/signal.h index 6c0ddfc0603..8dde973aaaf 100644 --- a/arch/powerpc/kernel/signal.h +++ b/arch/powerpc/kernel/signal.h @@ -12,7 +12,7 @@ #define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP))) -extern void do_signal(struct pt_regs *regs, unsigned long thread_info_flags); +extern void do_notify_resume(struct pt_regs *regs, unsigned long thread_info_flags); extern void __user * get_sigframe(struct k_sigaction *ka, struct pt_regs *regs, size_t frame_size, int is_32); diff --git a/arch/powerpc/platforms/wsp/smp.c b/arch/powerpc/platforms/wsp/smp.c index 71bd105f386..0ba103ae83a 100644 --- a/arch/powerpc/platforms/wsp/smp.c +++ b/arch/powerpc/platforms/wsp/smp.c @@ -71,7 +71,7 @@ int __devinit smp_a2_kick_cpu(int nr) static int __init smp_a2_probe(void) { - return cpus_weight(cpu_possible_map); + return num_possible_cpus(); } static struct smp_ops_t a2_smp_ops = { diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig index d1727584230..6d99a5fcc09 100644 --- a/arch/s390/Kconfig +++ b/arch/s390/Kconfig @@ -227,6 +227,9 @@ config COMPAT config SYSVIPC_COMPAT def_bool y if COMPAT && SYSVIPC +config KEYS_COMPAT + def_bool y if COMPAT && KEYS + config AUDIT_ARCH def_bool y diff --git a/arch/s390/include/asm/compat.h b/arch/s390/include/asm/compat.h index 2e49748b27d..234f1d859ce 100644 --- a/arch/s390/include/asm/compat.h +++ b/arch/s390/include/asm/compat.h @@ -172,13 +172,6 @@ static inline int is_compat_task(void) return is_32bit_task(); } -#else - -static inline int is_compat_task(void) -{ - return 0; -} - #endif static inline void __user *arch_compat_alloc_user_space(long len) diff --git a/arch/s390/kernel/compat_wrapper.S b/arch/s390/kernel/compat_wrapper.S index 18c51df9fe0..ff605a39cf4 100644 --- a/arch/s390/kernel/compat_wrapper.S +++ b/arch/s390/kernel/compat_wrapper.S @@ -662,7 +662,7 @@ ENTRY(sys32_getresuid16_wrapper) ENTRY(sys32_poll_wrapper) llgtr %r2,%r2 # struct pollfd * llgfr %r3,%r3 # unsigned int - lgfr %r4,%r4 # long + lgfr %r4,%r4 # int jg sys_poll # branch to system call ENTRY(sys32_setresgid16_wrapper) diff --git a/arch/s390/kernel/crash_dump.c b/arch/s390/kernel/crash_dump.c index 39f8fd4438f..c383ce440d9 100644 --- a/arch/s390/kernel/crash_dump.c +++ b/arch/s390/kernel/crash_dump.c @@ -11,7 +11,6 @@ #include <linux/module.h> #include <linux/gfp.h> #include <linux/slab.h> -#include <linux/crash_dump.h> #include <linux/bootmem.h> #include <linux/elf.h> #include <asm/ipl.h> diff --git a/arch/s390/kernel/process.c b/arch/s390/kernel/process.c index 3201ae44799..e795933eb2c 100644 --- a/arch/s390/kernel/process.c +++ b/arch/s390/kernel/process.c @@ -29,7 +29,6 @@ #include <asm/irq.h> #include <asm/timer.h> #include <asm/nmi.h> -#include <asm/compat.h> #include <asm/smp.h> #include "entry.h" @@ -76,7 +75,6 @@ static void default_idle(void) if (test_thread_flag(TIF_MCCK_PENDING)) { local_mcck_enable(); local_irq_enable(); - s390_handle_mcck(); return; } trace_hardirqs_on(); @@ -93,10 +91,12 @@ void cpu_idle(void) for (;;) { tick_nohz_idle_enter(); rcu_idle_enter(); - while (!need_resched()) + while (!need_resched() && !test_thread_flag(TIF_MCCK_PENDING)) default_idle(); rcu_idle_exit(); tick_nohz_idle_exit(); + if (test_thread_flag(TIF_MCCK_PENDING)) + s390_handle_mcck(); preempt_enable_no_resched(); schedule(); preempt_disable(); diff --git a/arch/s390/kernel/ptrace.c b/arch/s390/kernel/ptrace.c index 9d82ed4bcb2..61f95489d70 100644 --- a/arch/s390/kernel/ptrace.c +++ b/arch/s390/kernel/ptrace.c @@ -20,8 +20,8 @@ #include <linux/regset.h> #include <linux/tracehook.h> #include <linux/seccomp.h> +#include <linux/compat.h> #include <trace/syscall.h> -#include <asm/compat.h> #include <asm/segment.h> #include <asm/page.h> #include <asm/pgtable.h> diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c index 354de0763ef..3b2efc81f34 100644 --- a/arch/s390/kernel/setup.c +++ b/arch/s390/kernel/setup.c @@ -46,6 +46,7 @@ #include <linux/kexec.h> #include <linux/crash_dump.h> #include <linux/memory.h> +#include <linux/compat.h> #include <asm/ipl.h> #include <asm/uaccess.h> @@ -59,7 +60,6 @@ #include <asm/ptrace.h> #include <asm/sections.h> #include <asm/ebcdic.h> -#include <asm/compat.h> #include <asm/kvm_virtio.h> #include <asm/diag.h> diff --git a/arch/s390/kernel/signal.c b/arch/s390/kernel/signal.c index a8ba840294f..2d421d90fad 100644 --- a/arch/s390/kernel/signal.c +++ b/arch/s390/kernel/signal.c @@ -30,7 +30,6 @@ #include <asm/ucontext.h> #include <asm/uaccess.h> #include <asm/lowcore.h> -#include <asm/compat.h> #include "entry.h" #define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP))) diff --git a/arch/s390/kernel/time.c b/arch/s390/kernel/time.c index fa02f443f5f..14da278febb 100644 --- a/arch/s390/kernel/time.c +++ b/arch/s390/kernel/time.c @@ -113,11 +113,14 @@ static void fixup_clock_comparator(unsigned long long delta) static int s390_next_ktime(ktime_t expires, struct clock_event_device *evt) { + struct timespec ts; u64 nsecs; - nsecs = ktime_to_ns(ktime_sub(expires, ktime_get_monotonic_offset())); + ts.tv_sec = ts.tv_nsec = 0; + monotonic_to_bootbased(&ts); + nsecs = ktime_to_ns(ktime_add(timespec_to_ktime(ts), expires)); do_div(nsecs, 125); - S390_lowcore.clock_comparator = TOD_UNIX_EPOCH + (nsecs << 9); + S390_lowcore.clock_comparator = sched_clock_base_cc + (nsecs << 9); set_clock_comparator(S390_lowcore.clock_comparator); return 0; } diff --git a/arch/s390/mm/fault.c b/arch/s390/mm/fault.c index 354dd39073e..e8fcd928dc7 100644 --- a/arch/s390/mm/fault.c +++ b/arch/s390/mm/fault.c @@ -36,7 +36,6 @@ #include <asm/pgtable.h> #include <asm/irq.h> #include <asm/mmu_context.h> -#include <asm/compat.h> #include "../kernel/entry.h" #ifndef CONFIG_64BIT diff --git a/arch/s390/mm/init.c b/arch/s390/mm/init.c index 5d633019d8f..50236610de8 100644 --- a/arch/s390/mm/init.c +++ b/arch/s390/mm/init.c @@ -223,16 +223,38 @@ void free_initrd_mem(unsigned long start, unsigned long end) #ifdef CONFIG_MEMORY_HOTPLUG int arch_add_memory(int nid, u64 start, u64 size) { - struct pglist_data *pgdat; + unsigned long zone_start_pfn, zone_end_pfn, nr_pages; + unsigned long start_pfn = PFN_DOWN(start); + unsigned long size_pages = PFN_DOWN(size); struct zone *zone; int rc; - pgdat = NODE_DATA(nid); - zone = pgdat->node_zones + ZONE_MOVABLE; rc = vmem_add_mapping(start, size); if (rc) return rc; - rc = __add_pages(nid, zone, PFN_DOWN(start), PFN_DOWN(size)); + for_each_zone(zone) { + if (zone_idx(zone) != ZONE_MOVABLE) { + /* Add range within existing zone limits */ + zone_start_pfn = zone->zone_start_pfn; + zone_end_pfn = zone->zone_start_pfn + + zone->spanned_pages; + } else { + /* Add remaining range to ZONE_MOVABLE */ + zone_start_pfn = start_pfn; + zone_end_pfn = start_pfn + size_pages; + } + if (start_pfn < zone_start_pfn || start_pfn >= zone_end_pfn) + continue; + nr_pages = (start_pfn + size_pages > zone_end_pfn) ? + zone_end_pfn - start_pfn : size_pages; + rc = __add_pages(nid, zone, start_pfn, nr_pages); + if (rc) + break; + start_pfn += nr_pages; + size_pages -= nr_pages; + if (!size_pages) + break; + } if (rc) vmem_remove_mapping(start, size); return rc; diff --git a/arch/s390/mm/mmap.c b/arch/s390/mm/mmap.c index f09c74881b7..a0155c02e32 100644 --- a/arch/s390/mm/mmap.c +++ b/arch/s390/mm/mmap.c @@ -29,8 +29,8 @@ #include <linux/mman.h> #include <linux/module.h> #include <linux/random.h> +#include <linux/compat.h> #include <asm/pgalloc.h> -#include <asm/compat.h> static unsigned long stack_maxrandom_size(void) { diff --git a/arch/s390/mm/pgtable.c b/arch/s390/mm/pgtable.c index 9a4d02f64f1..51b0738e13d 100644 --- a/arch/s390/mm/pgtable.c +++ b/arch/s390/mm/pgtable.c @@ -574,7 +574,7 @@ static inline void page_table_free_pgste(unsigned long *table) page = pfn_to_page(__pa(table) >> PAGE_SHIFT); mp = (struct gmap_pgtable *) page->index; BUG_ON(!list_empty(&mp->mapper)); - pgtable_page_ctor(page); + pgtable_page_dtor(page); atomic_set(&page->_mapcount, -1); kfree(mp); __free_page(page); diff --git a/arch/sh/boards/board-sh7757lcr.c b/arch/sh/boards/board-sh7757lcr.c index 0838154dd21..24b1ee410da 100644 --- a/arch/sh/boards/board-sh7757lcr.c +++ b/arch/sh/boards/board-sh7757lcr.c @@ -169,6 +169,11 @@ static struct resource sh_eth_giga1_resources[] = { .end = 0xfee00fff, .flags = IORESOURCE_MEM, }, { + /* TSU */ + .start = 0xfee01800, + .end = 0xfee01fff, + .flags = IORESOURCE_MEM, + }, { .start = 316, .end = 316, .flags = IORESOURCE_IRQ, @@ -210,20 +215,13 @@ static struct resource sh_mmcif_resources[] = { }, }; -static struct sh_mmcif_dma sh7757lcr_mmcif_dma = { - .chan_priv_tx = { - .slave_id = SHDMA_SLAVE_MMCIF_TX, - }, - .chan_priv_rx = { - .slave_id = SHDMA_SLAVE_MMCIF_RX, - } -}; - static struct sh_mmcif_plat_data sh_mmcif_plat = { - .dma = &sh7757lcr_mmcif_dma, .sup_pclk = 0x0f, - .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA, + .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA | + MMC_CAP_NONREMOVABLE, .ocr = MMC_VDD_32_33 | MMC_VDD_33_34, + .slave_id_tx = SHDMA_SLAVE_MMCIF_TX, + .slave_id_rx = SHDMA_SLAVE_MMCIF_RX, }; static struct platform_device sh_mmcif_device = { diff --git a/arch/sh/boards/mach-ap325rxa/setup.c b/arch/sh/boards/mach-ap325rxa/setup.c index 6418e95c2b6..ebd0f818a25 100644 --- a/arch/sh/boards/mach-ap325rxa/setup.c +++ b/arch/sh/boards/mach-ap325rxa/setup.c @@ -22,6 +22,7 @@ #include <linux/i2c.h> #include <linux/smsc911x.h> #include <linux/gpio.h> +#include <linux/videodev2.h> #include <media/ov772x.h> #include <media/soc_camera.h> #include <media/soc_camera_platform.h> diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c index 1e146fcdb8a..59daae2f29d 100644 --- a/arch/sh/boards/mach-ecovec24/setup.c +++ b/arch/sh/boards/mach-ecovec24/setup.c @@ -29,9 +29,11 @@ #include <linux/input.h> #include <linux/input/sh_keysc.h> #include <linux/sh_eth.h> +#include <linux/videodev2.h> #include <video/sh_mobile_lcdc.h> #include <sound/sh_fsi.h> #include <media/sh_mobile_ceu.h> +#include <media/soc_camera.h> #include <media/tw9910.h> #include <media/mt9t112.h> #include <asm/heartbeat.h> diff --git a/arch/sh/boards/mach-kfr2r09/setup.c b/arch/sh/boards/mach-kfr2r09/setup.c index 2a18b06abda..5b382e1afae 100644 --- a/arch/sh/boards/mach-kfr2r09/setup.c +++ b/arch/sh/boards/mach-kfr2r09/setup.c @@ -22,6 +22,7 @@ #include <linux/input/sh_keysc.h> #include <linux/i2c.h> #include <linux/usb/r8a66597.h> +#include <linux/videodev2.h> #include <media/rj54n1cb0c.h> #include <media/soc_camera.h> #include <media/sh_mobile_ceu.h> diff --git a/arch/sh/boards/mach-migor/setup.c b/arch/sh/boards/mach-migor/setup.c index 68c3d6f4289..d37ba272052 100644 --- a/arch/sh/boards/mach-migor/setup.c +++ b/arch/sh/boards/mach-migor/setup.c @@ -21,9 +21,11 @@ #include <linux/delay.h> #include <linux/clk.h> #include <linux/gpio.h> +#include <linux/videodev2.h> #include <video/sh_mobile_lcdc.h> #include <media/sh_mobile_ceu.h> #include <media/ov772x.h> +#include <media/soc_camera.h> #include <media/tw9910.h> #include <asm/clock.h> #include <asm/machvec.h> diff --git a/arch/sh/boards/mach-se/7724/setup.c b/arch/sh/boards/mach-se/7724/setup.c index 1fc5d47a568..59f4db829e9 100644 --- a/arch/sh/boards/mach-se/7724/setup.c +++ b/arch/sh/boards/mach-se/7724/setup.c @@ -24,6 +24,7 @@ #include <linux/input/sh_keysc.h> #include <linux/usb/r8a66597.h> #include <linux/sh_eth.h> +#include <linux/videodev2.h> #include <video/sh_mobile_lcdc.h> #include <media/sh_mobile_ceu.h> #include <sound/sh_fsi.h> diff --git a/arch/sh/drivers/pci/pci-sh7780.c b/arch/sh/drivers/pci/pci-sh7780.c index fa7b978cc72..fb8f1499074 100644 --- a/arch/sh/drivers/pci/pci-sh7780.c +++ b/arch/sh/drivers/pci/pci-sh7780.c @@ -74,7 +74,7 @@ struct pci_errors { { SH4_PCIINT_MLCK, "master lock error" }, { SH4_PCIINT_TABT, "target-target abort" }, { SH4_PCIINT_TRET, "target retry time out" }, - { SH4_PCIINT_MFDE, "master function disable erorr" }, + { SH4_PCIINT_MFDE, "master function disable error" }, { SH4_PCIINT_PRTY, "address parity error" }, { SH4_PCIINT_SERR, "SERR" }, { SH4_PCIINT_TWDP, "data parity error for target write" }, diff --git a/arch/sh/include/asm/device.h b/arch/sh/include/asm/device.h index a1c9c0daec1..071bcb4d4bf 100644 --- a/arch/sh/include/asm/device.h +++ b/arch/sh/include/asm/device.h @@ -3,9 +3,10 @@ * * This file is released under the GPLv2 */ +#ifndef __ASM_SH_DEVICE_H +#define __ASM_SH_DEVICE_H -struct dev_archdata { -}; +#include <asm-generic/device.h> struct platform_device; /* allocate contiguous memory chunk and fill in struct resource */ @@ -14,5 +15,4 @@ int platform_resource_setup_memory(struct platform_device *pdev, void plat_early_device_setup(void); -struct pdev_archdata { -}; +#endif /* __ASM_SH_DEVICE_H */ diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7724.c b/arch/sh/kernel/cpu/sh4a/clock-sh7724.c index b3c039a5064..70bd96646f4 100644 --- a/arch/sh/kernel/cpu/sh4a/clock-sh7724.c +++ b/arch/sh/kernel/cpu/sh4a/clock-sh7724.c @@ -343,7 +343,7 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("sh_mobile_ceu.1", &mstp_clks[HWBLK_CEU1]), CLKDEV_CON_ID("beu1", &mstp_clks[HWBLK_BEU1]), CLKDEV_CON_ID("2ddmac0", &mstp_clks[HWBLK_2DDMAC]), - CLKDEV_CON_ID("spu0", &mstp_clks[HWBLK_SPU]), + CLKDEV_DEV_ID("sh_fsi.0", &mstp_clks[HWBLK_SPU]), CLKDEV_CON_ID("jpu0", &mstp_clks[HWBLK_JPU]), CLKDEV_DEV_ID("sh-vou.0", &mstp_clks[HWBLK_VOU]), CLKDEV_CON_ID("beu0", &mstp_clks[HWBLK_BEU0]), diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7757.c b/arch/sh/kernel/cpu/sh4a/setup-sh7757.c index a7b2da6b3a1..2875e8be4f7 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7757.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7757.c @@ -133,7 +133,7 @@ static struct resource spi0_resources[] = { [0] = { .start = 0xfe002000, .end = 0xfe0020ff, - .flags = IORESOURCE_MEM, + .flags = IORESOURCE_MEM | IORESOURCE_MEM_32BIT, }, [1] = { .start = 86, @@ -661,6 +661,25 @@ static struct platform_device spi0_device = { .resource = spi0_resources, }; +static struct resource spi1_resources[] = { + { + .start = 0xffd8ee70, + .end = 0xffd8eeff, + .flags = IORESOURCE_MEM | IORESOURCE_MEM_8BIT, + }, + { + .start = 54, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device spi1_device = { + .name = "sh_spi", + .id = 1, + .num_resources = ARRAY_SIZE(spi1_resources), + .resource = spi1_resources, +}; + static struct resource usb_ehci_resources[] = { [0] = { .start = 0xfe4f1000, @@ -720,6 +739,7 @@ static struct platform_device *sh7757_devices[] __initdata = { &dma2_device, &dma3_device, &spi0_device, + &spi1_device, &usb_ehci_device, &usb_ohci_device, }; diff --git a/arch/sh/kernel/smp.c b/arch/sh/kernel/smp.c index 3147a9a6fb8..f624174bf23 100644 --- a/arch/sh/kernel/smp.c +++ b/arch/sh/kernel/smp.c @@ -63,7 +63,7 @@ void __init smp_prepare_cpus(unsigned int max_cpus) mp_ops->prepare_cpus(max_cpus); #ifndef CONFIG_HOTPLUG_CPU - init_cpu_present(&cpu_possible_map); + init_cpu_present(cpu_possible_mask); #endif } diff --git a/arch/sh/kernel/topology.c b/arch/sh/kernel/topology.c index 4649a6ff0cf..772caffba22 100644 --- a/arch/sh/kernel/topology.c +++ b/arch/sh/kernel/topology.c @@ -27,7 +27,7 @@ static cpumask_t cpu_coregroup_map(unsigned int cpu) * Presently all SH-X3 SMP cores are multi-cores, so just keep it * simple until we have a method for determining topology.. */ - return cpu_possible_map; + return *cpu_possible_mask; } const struct cpumask *cpu_coregroup_mask(unsigned int cpu) diff --git a/arch/sh/mm/cache-sh2a.c b/arch/sh/mm/cache-sh2a.c index ae08cbbfa56..949e2d3138a 100644 --- a/arch/sh/mm/cache-sh2a.c +++ b/arch/sh/mm/cache-sh2a.c @@ -23,6 +23,7 @@ #define MAX_OCACHE_PAGES 32 #define MAX_ICACHE_PAGES 32 +#ifdef CONFIG_CACHE_WRITEBACK static void sh2a_flush_oc_line(unsigned long v, int way) { unsigned long addr = (v & 0x000007f0) | (way << 11); @@ -34,6 +35,7 @@ static void sh2a_flush_oc_line(unsigned long v, int way) __raw_writel(data, CACHE_OC_ADDRESS_ARRAY | addr); } } +#endif static void sh2a_invalidate_line(unsigned long cache_addr, unsigned long v) { diff --git a/arch/x86/ia32/ia32_aout.c b/arch/x86/ia32/ia32_aout.c index fd843877e84..39e49091f64 100644 --- a/arch/x86/ia32/ia32_aout.c +++ b/arch/x86/ia32/ia32_aout.c @@ -315,6 +315,13 @@ static int load_aout_binary(struct linux_binprm *bprm, struct pt_regs *regs) current->mm->free_area_cache = TASK_UNMAPPED_BASE; current->mm->cached_hole_size = 0; + retval = setup_arg_pages(bprm, IA32_STACK_TOP, EXSTACK_DEFAULT); + if (retval < 0) { + /* Someone check-me: is this error path enough? */ + send_sig(SIGKILL, current, 0); + return retval; + } + install_exec_creds(bprm); current->flags &= ~PF_FORKNOEXEC; @@ -410,13 +417,6 @@ beyond_if: set_brk(current->mm->start_brk, current->mm->brk); - retval = setup_arg_pages(bprm, IA32_STACK_TOP, EXSTACK_DEFAULT); - if (retval < 0) { - /* Someone check-me: is this error path enough? */ - send_sig(SIGKILL, current, 0); - return retval; - } - current->mm->start_stack = (unsigned long)create_aout_tables((char __user *)bprm->p, bprm); /* start thread */ diff --git a/arch/x86/include/asm/i387.h b/arch/x86/include/asm/i387.h index a850b4d8d14..247904945d3 100644 --- a/arch/x86/include/asm/i387.h +++ b/arch/x86/include/asm/i387.h @@ -29,10 +29,11 @@ extern unsigned int sig_xstate_size; extern void fpu_init(void); extern void mxcsr_feature_mask_init(void); extern int init_fpu(struct task_struct *child); -extern void __math_state_restore(struct task_struct *); extern void math_state_restore(void); extern int dump_fpu(struct pt_regs *, struct user_i387_struct *); +DECLARE_PER_CPU(struct task_struct *, fpu_owner_task); + extern user_regset_active_fn fpregs_active, xfpregs_active; extern user_regset_get_fn fpregs_get, xfpregs_get, fpregs_soft_get, xstateregs_get; @@ -269,6 +270,16 @@ static inline int fpu_restore_checking(struct fpu *fpu) static inline int restore_fpu_checking(struct task_struct *tsk) { + /* AMD K7/K8 CPUs don't save/restore FDP/FIP/FOP unless an exception + is pending. Clear the x87 state here by setting it to fixed + values. "m" is a random variable that should be in L1 */ + alternative_input( + ASM_NOP8 ASM_NOP2, + "emms\n\t" /* clear stack tags */ + "fildl %P[addr]", /* set F?P to defined value */ + X86_FEATURE_FXSAVE_LEAK, + [addr] "m" (tsk->thread.fpu.has_fpu)); + return fpu_restore_checking(&tsk->thread.fpu); } @@ -279,19 +290,21 @@ static inline int restore_fpu_checking(struct task_struct *tsk) */ static inline int __thread_has_fpu(struct task_struct *tsk) { - return tsk->thread.has_fpu; + return tsk->thread.fpu.has_fpu; } /* Must be paired with an 'stts' after! */ static inline void __thread_clear_has_fpu(struct task_struct *tsk) { - tsk->thread.has_fpu = 0; + tsk->thread.fpu.has_fpu = 0; + percpu_write(fpu_owner_task, NULL); } /* Must be paired with a 'clts' before! */ static inline void __thread_set_has_fpu(struct task_struct *tsk) { - tsk->thread.has_fpu = 1; + tsk->thread.fpu.has_fpu = 1; + percpu_write(fpu_owner_task, tsk); } /* @@ -336,30 +349,36 @@ typedef struct { int preload; } fpu_switch_t; * We don't do that yet, so "fpu_lazy_restore()" always returns * false, but some day.. */ -#define fpu_lazy_restore(tsk) (0) -#define fpu_lazy_state_intact(tsk) do { } while (0) +static inline int fpu_lazy_restore(struct task_struct *new, unsigned int cpu) +{ + return new == percpu_read_stable(fpu_owner_task) && + cpu == new->thread.fpu.last_cpu; +} -static inline fpu_switch_t switch_fpu_prepare(struct task_struct *old, struct task_struct *new) +static inline fpu_switch_t switch_fpu_prepare(struct task_struct *old, struct task_struct *new, int cpu) { fpu_switch_t fpu; fpu.preload = tsk_used_math(new) && new->fpu_counter > 5; if (__thread_has_fpu(old)) { - if (__save_init_fpu(old)) - fpu_lazy_state_intact(old); - __thread_clear_has_fpu(old); - old->fpu_counter++; + if (!__save_init_fpu(old)) + cpu = ~0; + old->thread.fpu.last_cpu = cpu; + old->thread.fpu.has_fpu = 0; /* But leave fpu_owner_task! */ /* Don't change CR0.TS if we just switch! */ if (fpu.preload) { + new->fpu_counter++; __thread_set_has_fpu(new); prefetch(new->thread.fpu.state); } else stts(); } else { old->fpu_counter = 0; + old->thread.fpu.last_cpu = ~0; if (fpu.preload) { - if (fpu_lazy_restore(new)) + new->fpu_counter++; + if (fpu_lazy_restore(new, cpu)) fpu.preload = 0; else prefetch(new->thread.fpu.state); @@ -377,8 +396,10 @@ static inline fpu_switch_t switch_fpu_prepare(struct task_struct *old, struct ta */ static inline void switch_fpu_finish(struct task_struct *new, fpu_switch_t fpu) { - if (fpu.preload) - __math_state_restore(new); + if (fpu.preload) { + if (unlikely(restore_fpu_checking(new))) + __thread_fpu_end(new); + } } /* @@ -451,8 +472,10 @@ static inline void kernel_fpu_begin(void) __save_init_fpu(me); __thread_clear_has_fpu(me); /* We do 'stts()' in kernel_fpu_end() */ - } else + } else { + percpu_write(fpu_owner_task, NULL); clts(); + } } static inline void kernel_fpu_end(void) diff --git a/arch/x86/include/asm/perf_event.h b/arch/x86/include/asm/perf_event.h index 096c975e099..461ce432b1c 100644 --- a/arch/x86/include/asm/perf_event.h +++ b/arch/x86/include/asm/perf_event.h @@ -242,4 +242,12 @@ static inline void perf_get_x86_pmu_capability(struct x86_pmu_capability *cap) static inline void perf_events_lapic_init(void) { } #endif +#if defined(CONFIG_PERF_EVENTS) && defined(CONFIG_CPU_SUP_AMD) + extern void amd_pmu_enable_virt(void); + extern void amd_pmu_disable_virt(void); +#else + static inline void amd_pmu_enable_virt(void) { } + static inline void amd_pmu_disable_virt(void) { } +#endif + #endif /* _ASM_X86_PERF_EVENT_H */ diff --git a/arch/x86/include/asm/processor.h b/arch/x86/include/asm/processor.h index f7c89e231c6..58545c97d07 100644 --- a/arch/x86/include/asm/processor.h +++ b/arch/x86/include/asm/processor.h @@ -374,6 +374,8 @@ union thread_xstate { }; struct fpu { + unsigned int last_cpu; + unsigned int has_fpu; union thread_xstate *state; }; @@ -454,7 +456,6 @@ struct thread_struct { unsigned long trap_no; unsigned long error_code; /* floating point and extended processor state */ - unsigned long has_fpu; struct fpu fpu; #ifdef CONFIG_X86_32 /* Virtual 86 mode info */ diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c index d43cad74f16..c0f7d68d318 100644 --- a/arch/x86/kernel/cpu/common.c +++ b/arch/x86/kernel/cpu/common.c @@ -1044,6 +1044,9 @@ DEFINE_PER_CPU(char *, irq_stack_ptr) = DEFINE_PER_CPU(unsigned int, irq_count) = -1; +DEFINE_PER_CPU(struct task_struct *, fpu_owner_task); +EXPORT_PER_CPU_SYMBOL(fpu_owner_task); + /* * Special IST stacks which the CPU switches to when it calls * an IST-marked descriptor entry. Up to 7 stacks (hardware @@ -1111,6 +1114,8 @@ void debug_stack_reset(void) DEFINE_PER_CPU(struct task_struct *, current_task) = &init_task; EXPORT_PER_CPU_SYMBOL(current_task); +DEFINE_PER_CPU(struct task_struct *, fpu_owner_task); +EXPORT_PER_CPU_SYMBOL(fpu_owner_task); #ifdef CONFIG_CC_STACKPROTECTOR DEFINE_PER_CPU_ALIGNED(struct stack_canary, stack_canary); diff --git a/arch/x86/kernel/cpu/intel_cacheinfo.c b/arch/x86/kernel/cpu/intel_cacheinfo.c index 6b45e5e7a90..73d08ed98a6 100644 --- a/arch/x86/kernel/cpu/intel_cacheinfo.c +++ b/arch/x86/kernel/cpu/intel_cacheinfo.c @@ -326,8 +326,7 @@ static void __cpuinit amd_calc_l3_indices(struct amd_northbridge *nb) l3->indices = (max(max3(sc0, sc1, sc2), sc3) << 10) - 1; } -static void __cpuinit amd_init_l3_cache(struct _cpuid4_info_regs *this_leaf, - int index) +static void __cpuinit amd_init_l3_cache(struct _cpuid4_info_regs *this_leaf, int index) { int node; @@ -725,14 +724,16 @@ static DEFINE_PER_CPU(struct _cpuid4_info *, ici_cpuid4_info); #define CPUID4_INFO_IDX(x, y) (&((per_cpu(ici_cpuid4_info, x))[y])) #ifdef CONFIG_SMP -static void __cpuinit cache_shared_cpu_map_setup(unsigned int cpu, int index) + +static int __cpuinit cache_shared_amd_cpu_map_setup(unsigned int cpu, int index) { - struct _cpuid4_info *this_leaf, *sibling_leaf; - unsigned long num_threads_sharing; - int index_msb, i, sibling; + struct _cpuid4_info *this_leaf; + int ret, i, sibling; struct cpuinfo_x86 *c = &cpu_data(cpu); - if ((index == 3) && (c->x86_vendor == X86_VENDOR_AMD)) { + ret = 0; + if (index == 3) { + ret = 1; for_each_cpu(i, cpu_llc_shared_mask(cpu)) { if (!per_cpu(ici_cpuid4_info, i)) continue; @@ -743,8 +744,35 @@ static void __cpuinit cache_shared_cpu_map_setup(unsigned int cpu, int index) set_bit(sibling, this_leaf->shared_cpu_map); } } - return; + } else if ((c->x86 == 0x15) && ((index == 1) || (index == 2))) { + ret = 1; + for_each_cpu(i, cpu_sibling_mask(cpu)) { + if (!per_cpu(ici_cpuid4_info, i)) + continue; + this_leaf = CPUID4_INFO_IDX(i, index); + for_each_cpu(sibling, cpu_sibling_mask(cpu)) { + if (!cpu_online(sibling)) + continue; + set_bit(sibling, this_leaf->shared_cpu_map); + } + } } + + return ret; +} + +static void __cpuinit cache_shared_cpu_map_setup(unsigned int cpu, int index) +{ + struct _cpuid4_info *this_leaf, *sibling_leaf; + unsigned long num_threads_sharing; + int index_msb, i; + struct cpuinfo_x86 *c = &cpu_data(cpu); + + if (c->x86_vendor == X86_VENDOR_AMD) { + if (cache_shared_amd_cpu_map_setup(cpu, index)) + return; + } + this_leaf = CPUID4_INFO_IDX(cpu, index); num_threads_sharing = 1 + this_leaf->base.eax.split.num_threads_sharing; diff --git a/arch/x86/kernel/cpu/mcheck/mce_amd.c b/arch/x86/kernel/cpu/mcheck/mce_amd.c index 786e76a8632..e4eeaaf58a4 100644 --- a/arch/x86/kernel/cpu/mcheck/mce_amd.c +++ b/arch/x86/kernel/cpu/mcheck/mce_amd.c @@ -528,6 +528,7 @@ static __cpuinit int threshold_create_bank(unsigned int cpu, unsigned int bank) sprintf(name, "threshold_bank%i", bank); +#ifdef CONFIG_SMP if (cpu_data(cpu).cpu_core_id && shared_bank[bank]) { /* symlink */ i = cpumask_first(cpu_llc_shared_mask(cpu)); @@ -553,6 +554,7 @@ static __cpuinit int threshold_create_bank(unsigned int cpu, unsigned int bank) goto out; } +#endif b = kzalloc(sizeof(struct threshold_bank), GFP_KERNEL); if (!b) { diff --git a/arch/x86/kernel/cpu/perf_event.h b/arch/x86/kernel/cpu/perf_event.h index 8944062f46e..c30c807ddc7 100644 --- a/arch/x86/kernel/cpu/perf_event.h +++ b/arch/x86/kernel/cpu/perf_event.h @@ -147,7 +147,9 @@ struct cpu_hw_events { /* * AMD specific bits */ - struct amd_nb *amd_nb; + struct amd_nb *amd_nb; + /* Inverted mask of bits to clear in the perf_ctr ctrl registers */ + u64 perf_ctr_virt_mask; void *kfree_on_online; }; @@ -417,9 +419,11 @@ void x86_pmu_disable_all(void); static inline void __x86_pmu_enable_event(struct hw_perf_event *hwc, u64 enable_mask) { + u64 disable_mask = __this_cpu_read(cpu_hw_events.perf_ctr_virt_mask); + if (hwc->extra_reg.reg) wrmsrl(hwc->extra_reg.reg, hwc->extra_reg.config); - wrmsrl(hwc->config_base, hwc->config | enable_mask); + wrmsrl(hwc->config_base, (hwc->config | enable_mask) & ~disable_mask); } void x86_pmu_enable_all(int added); diff --git a/arch/x86/kernel/cpu/perf_event_amd.c b/arch/x86/kernel/cpu/perf_event_amd.c index 0397b23be8e..67250a52430 100644 --- a/arch/x86/kernel/cpu/perf_event_amd.c +++ b/arch/x86/kernel/cpu/perf_event_amd.c @@ -1,4 +1,5 @@ #include <linux/perf_event.h> +#include <linux/export.h> #include <linux/types.h> #include <linux/init.h> #include <linux/slab.h> @@ -357,7 +358,9 @@ static void amd_pmu_cpu_starting(int cpu) struct amd_nb *nb; int i, nb_id; - if (boot_cpu_data.x86_max_cores < 2) + cpuc->perf_ctr_virt_mask = AMD_PERFMON_EVENTSEL_HOSTONLY; + + if (boot_cpu_data.x86_max_cores < 2 || boot_cpu_data.x86 == 0x15) return; nb_id = amd_get_nb_id(cpu); @@ -587,9 +590,9 @@ static __initconst const struct x86_pmu amd_pmu_f15h = { .put_event_constraints = amd_put_event_constraints, .cpu_prepare = amd_pmu_cpu_prepare, - .cpu_starting = amd_pmu_cpu_starting, .cpu_dead = amd_pmu_cpu_dead, #endif + .cpu_starting = amd_pmu_cpu_starting, }; __init int amd_pmu_init(void) @@ -621,3 +624,33 @@ __init int amd_pmu_init(void) return 0; } + +void amd_pmu_enable_virt(void) +{ + struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events); + + cpuc->perf_ctr_virt_mask = 0; + + /* Reload all events */ + x86_pmu_disable_all(); + x86_pmu_enable_all(0); +} +EXPORT_SYMBOL_GPL(amd_pmu_enable_virt); + +void amd_pmu_disable_virt(void) +{ + struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events); + + /* + * We only mask out the Host-only bit so that host-only counting works + * when SVM is disabled. If someone sets up a guest-only counter when + * SVM is disabled the Guest-only bits still gets set and the counter + * will not count anything. + */ + cpuc->perf_ctr_virt_mask = AMD_PERFMON_EVENTSEL_HOSTONLY; + + /* Reload all events */ + x86_pmu_disable_all(); + x86_pmu_enable_all(0); +} +EXPORT_SYMBOL_GPL(amd_pmu_disable_virt); diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S index 3fe8239fd8f..1333d985177 100644 --- a/arch/x86/kernel/entry_64.S +++ b/arch/x86/kernel/entry_64.S @@ -1532,10 +1532,17 @@ ENTRY(nmi) pushq_cfi %rdx /* + * If %cs was not the kernel segment, then the NMI triggered in user + * space, which means it is definitely not nested. + */ + cmpl $__KERNEL_CS, 16(%rsp) + jne first_nmi + + /* * Check the special variable on the stack to see if NMIs are * executing. */ - cmp $1, -8(%rsp) + cmpl $1, -8(%rsp) je nested_nmi /* diff --git a/arch/x86/kernel/microcode_amd.c b/arch/x86/kernel/microcode_amd.c index ac0417be913..73465aab28f 100644 --- a/arch/x86/kernel/microcode_amd.c +++ b/arch/x86/kernel/microcode_amd.c @@ -360,7 +360,6 @@ out: static enum ucode_state request_microcode_user(int cpu, const void __user *buf, size_t size) { - pr_info("AMD microcode update via /dev/cpu/microcode not supported\n"); return UCODE_ERROR; } diff --git a/arch/x86/kernel/process_32.c b/arch/x86/kernel/process_32.c index 80bfe1ab003..c08d1ff12b7 100644 --- a/arch/x86/kernel/process_32.c +++ b/arch/x86/kernel/process_32.c @@ -214,6 +214,7 @@ int copy_thread(unsigned long clone_flags, unsigned long sp, task_user_gs(p) = get_user_gs(regs); + p->fpu_counter = 0; p->thread.io_bitmap_ptr = NULL; tsk = current; err = -ENOMEM; @@ -303,7 +304,7 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p) /* never put a printk in __switch_to... printk() calls wake_up*() indirectly */ - fpu = switch_fpu_prepare(prev_p, next_p); + fpu = switch_fpu_prepare(prev_p, next_p, cpu); /* * Reload esp0. diff --git a/arch/x86/kernel/process_64.c b/arch/x86/kernel/process_64.c index 1fd94bc4279..cfa5c90c01d 100644 --- a/arch/x86/kernel/process_64.c +++ b/arch/x86/kernel/process_64.c @@ -286,6 +286,7 @@ int copy_thread(unsigned long clone_flags, unsigned long sp, set_tsk_thread_flag(p, TIF_FORK); + p->fpu_counter = 0; p->thread.io_bitmap_ptr = NULL; savesegment(gs, p->thread.gsindex); @@ -388,7 +389,7 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p) unsigned fsindex, gsindex; fpu_switch_t fpu; - fpu = switch_fpu_prepare(prev_p, next_p); + fpu = switch_fpu_prepare(prev_p, next_p, cpu); /* * Reload esp0, LDT and the page table pointer: diff --git a/arch/x86/kernel/traps.c b/arch/x86/kernel/traps.c index 77da5b475ad..4bbe04d9674 100644 --- a/arch/x86/kernel/traps.c +++ b/arch/x86/kernel/traps.c @@ -571,37 +571,6 @@ asmlinkage void __attribute__((weak)) smp_threshold_interrupt(void) } /* - * This gets called with the process already owning the - * FPU state, and with CR0.TS cleared. It just needs to - * restore the FPU register state. - */ -void __math_state_restore(struct task_struct *tsk) -{ - /* We need a safe address that is cheap to find and that is already - in L1. We've just brought in "tsk->thread.has_fpu", so use that */ -#define safe_address (tsk->thread.has_fpu) - - /* AMD K7/K8 CPUs don't save/restore FDP/FIP/FOP unless an exception - is pending. Clear the x87 state here by setting it to fixed - values. safe_address is a random variable that should be in L1 */ - alternative_input( - ASM_NOP8 ASM_NOP2, - "emms\n\t" /* clear stack tags */ - "fildl %P[addr]", /* set F?P to defined value */ - X86_FEATURE_FXSAVE_LEAK, - [addr] "m" (safe_address)); - - /* - * Paranoid restore. send a SIGSEGV if we fail to restore the state. - */ - if (unlikely(restore_fpu_checking(tsk))) { - __thread_fpu_end(tsk); - force_sig(SIGSEGV, tsk); - return; - } -} - -/* * 'math_state_restore()' saves the current math information in the * old math state array, and gets the new ones from the current task * @@ -631,7 +600,14 @@ void math_state_restore(void) } __thread_fpu_begin(tsk); - __math_state_restore(tsk); + /* + * Paranoid restore. send a SIGSEGV if we fail to restore the state. + */ + if (unlikely(restore_fpu_checking(tsk))) { + __thread_fpu_end(tsk); + force_sig(SIGSEGV, tsk); + return; + } tsk->fpu_counter++; } diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c index 5fa553babe5..e385214711c 100644 --- a/arch/x86/kvm/svm.c +++ b/arch/x86/kvm/svm.c @@ -29,6 +29,7 @@ #include <linux/ftrace_event.h> #include <linux/slab.h> +#include <asm/perf_event.h> #include <asm/tlbflush.h> #include <asm/desc.h> #include <asm/kvm_para.h> @@ -575,6 +576,8 @@ static void svm_hardware_disable(void *garbage) wrmsrl(MSR_AMD64_TSC_RATIO, TSC_RATIO_DEFAULT); cpu_svm_disable(); + + amd_pmu_disable_virt(); } static int svm_hardware_enable(void *garbage) @@ -622,6 +625,8 @@ static int svm_hardware_enable(void *garbage) svm_init_erratum_383(); + amd_pmu_enable_virt(); + return 0; } diff --git a/arch/x86/lib/delay.c b/arch/x86/lib/delay.c index fc45ba887d0..e395693abdb 100644 --- a/arch/x86/lib/delay.c +++ b/arch/x86/lib/delay.c @@ -48,9 +48,9 @@ static void delay_loop(unsigned long loops) } /* TSC based delay: */ -static void delay_tsc(unsigned long loops) +static void delay_tsc(unsigned long __loops) { - unsigned long bclock, now; + u32 bclock, now, loops = __loops; int cpu; preempt_disable(); diff --git a/arch/x86/mm/hugetlbpage.c b/arch/x86/mm/hugetlbpage.c index f581a18c0d4..8ecbb4bba4b 100644 --- a/arch/x86/mm/hugetlbpage.c +++ b/arch/x86/mm/hugetlbpage.c @@ -333,13 +333,15 @@ try_again: * Lookup failure means no vma is above this address, * i.e. return with success: */ - if (!(vma = find_vma_prev(mm, addr, &prev_vma))) + vma = find_vma(mm, addr); + if (!vma) return addr; /* * new region fits between prev_vma->vm_end and * vma->vm_start, use it: */ + prev_vma = vma->vm_prev; if (addr + len <= vma->vm_start && (!prev_vma || (addr >= prev_vma->vm_end))) { /* remember the address as a hint for next time */ diff --git a/arch/x86/pci/acpi.c b/arch/x86/pci/acpi.c index a312e76063a..49a5cb55429 100644 --- a/arch/x86/pci/acpi.c +++ b/arch/x86/pci/acpi.c @@ -60,6 +60,16 @@ static const struct dmi_system_id pci_use_crs_table[] __initconst = { DMI_MATCH(DMI_BIOS_VENDOR, "American Megatrends Inc."), }, }, + /* https://bugzilla.kernel.org/show_bug.cgi?id=42619 */ + { + .callback = set_use_crs, + .ident = "MSI MS-7253", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "MICRO-STAR INTERNATIONAL CO., LTD"), + DMI_MATCH(DMI_BOARD_NAME, "MS-7253"), + DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies, LTD"), + }, + }, /* Now for the blacklist.. */ @@ -282,9 +292,6 @@ static void add_resources(struct pci_root_info *info) int i; struct resource *res, *root, *conflict; - if (!pci_use_crs) - return; - coalesce_windows(info, IORESOURCE_MEM); coalesce_windows(info, IORESOURCE_IO); @@ -336,8 +343,13 @@ get_current_resources(struct acpi_device *device, int busnum, acpi_walk_resources(device->handle, METHOD_NAME__CRS, setup_resource, &info); - add_resources(&info); - return; + if (pci_use_crs) { + add_resources(&info); + + return; + } + + kfree(info.name); name_alloc_fail: kfree(info.res); diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index 12eb07bfb26..4172af8ceeb 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -1141,7 +1141,9 @@ asmlinkage void __init xen_start_kernel(void) /* Prevent unwanted bits from being set in PTEs. */ __supported_pte_mask &= ~_PAGE_GLOBAL; +#if 0 if (!xen_initial_domain()) +#endif __supported_pte_mask &= ~(_PAGE_PWT | _PAGE_PCD); __supported_pte_mask |= _PAGE_IOMAP; @@ -1204,10 +1206,6 @@ asmlinkage void __init xen_start_kernel(void) pgd = (pgd_t *)xen_start_info->pt_base; - if (!xen_initial_domain()) - __supported_pte_mask &= ~(_PAGE_PWT | _PAGE_PCD); - - __supported_pte_mask |= _PAGE_IOMAP; /* Don't do the full vcpu_info placement stuff until we have a possible map and a non-dummy shared_info. */ per_cpu(xen_vcpu, 0) = &HYPERVISOR_shared_info->vcpu_info[0]; diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c index 58a0e46c404..95c1cf60c66 100644 --- a/arch/x86/xen/mmu.c +++ b/arch/x86/xen/mmu.c @@ -415,13 +415,13 @@ static pteval_t iomap_pte(pteval_t val) static pteval_t xen_pte_val(pte_t pte) { pteval_t pteval = pte.pte; - +#if 0 /* If this is a WC pte, convert back from Xen WC to Linux WC */ if ((pteval & (_PAGE_PAT | _PAGE_PCD | _PAGE_PWT)) == _PAGE_PAT) { WARN_ON(!pat_enabled); pteval = (pteval & ~_PAGE_PAT) | _PAGE_PWT; } - +#endif if (xen_initial_domain() && (pteval & _PAGE_IOMAP)) return pteval; @@ -463,7 +463,7 @@ void xen_set_pat(u64 pat) static pte_t xen_make_pte(pteval_t pte) { phys_addr_t addr = (pte & PTE_PFN_MASK); - +#if 0 /* If Linux is trying to set a WC pte, then map to the Xen WC. * If _PAGE_PAT is set, then it probably means it is really * _PAGE_PSE, so avoid fiddling with the PAT mapping and hope @@ -476,7 +476,7 @@ static pte_t xen_make_pte(pteval_t pte) if ((pte & (_PAGE_PCD | _PAGE_PWT)) == _PAGE_PWT) pte = (pte & ~(_PAGE_PCD | _PAGE_PWT)) | _PAGE_PAT; } - +#endif /* * Unprivileged domains are allowed to do IOMAPpings for * PCI passthrough, but not map ISA space. The ISA |