summaryrefslogtreecommitdiff
path: root/arch/arm
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm')
-rw-r--r--arch/arm/Kconfig.debug14
-rw-r--r--arch/arm/configs/mmp2_defconfig5
-rw-r--r--arch/arm/configs/pxa910_defconfig4
-rw-r--r--arch/arm/mach-ks8695/Kconfig61
-rw-r--r--arch/arm/mach-ks8695/Makefile8
-rw-r--r--arch/arm/mach-ks8695/board-og.c199
-rw-r--r--arch/arm/mach-ks8695/board-sg.c121
-rw-r--r--arch/arm/mach-mmp/include/mach/debug-macro.S12
-rw-r--r--arch/arm/mach-mmp/ttc_dkb.c10
9 files changed, 430 insertions, 4 deletions
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index f15f82bf3a5..0919191b8aa 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -224,6 +224,20 @@ choice
Say Y here if you want kernel low-level debugging support
on i.MX6Q UART4.
+ config DEBUG_MMP_UART2
+ bool "Kernel low-level debugging message via MMP UART2"
+ depends on ARCH_MMP
+ help
+ Say Y here if you want kernel low-level debugging support
+ on MMP UART2.
+
+ config DEBUG_MMP_UART3
+ bool "Kernel low-level debugging message via MMP UART3"
+ depends on ARCH_MMP
+ help
+ Say Y here if you want kernel low-level debugging support
+ on MMP UART3.
+
config DEBUG_MSM_UART1
bool "Kernel low-level debugging messages via MSM UART1"
depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50
diff --git a/arch/arm/configs/mmp2_defconfig b/arch/arm/configs/mmp2_defconfig
index 5a584520db2..f1cb95e58af 100644
--- a/arch/arm/configs/mmp2_defconfig
+++ b/arch/arm/configs/mmp2_defconfig
@@ -16,7 +16,7 @@ CONFIG_PREEMPT=y
CONFIG_AEABI=y
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=/dev/nfs rootfstype=nfs nfsroot=192.168.1.100:/nfsroot/ ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on console=ttyS2,38400 mem=128M user_debug=255"
+CONFIG_CMDLINE="root=/dev/nfs rootfstype=nfs nfsroot=192.168.1.100:/nfsroot/ ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on console=ttyS2,38400 mem=128M user_debug=255 earlyprintk"
CONFIG_VFP=y
CONFIG_NET=y
CONFIG_PACKET=y
@@ -90,6 +90,9 @@ CONFIG_DEBUG_INFO=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_DYNAMIC_DEBUG is not set
CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_LL=y
+CONFIG_DEBUG_MMP_UART3=y
+CONFIG_EARLY_PRINTK=y
CONFIG_DEBUG_ERRORS=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRC_CCITT=y
diff --git a/arch/arm/configs/pxa910_defconfig b/arch/arm/configs/pxa910_defconfig
index 1cd381e1d47..191118caa5c 100644
--- a/arch/arm/configs/pxa910_defconfig
+++ b/arch/arm/configs/pxa910_defconfig
@@ -17,7 +17,7 @@ CONFIG_PREEMPT=y
CONFIG_AEABI=y
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=/dev/nfs rootfstype=nfs nfsroot=192.168.2.100:/nfsroot/ ip=192.168.2.101:192.168.2.100::255.255.255.0::eth0:on console=ttyS0,115200 mem=128M"
+CONFIG_CMDLINE="root=/dev/nfs rootfstype=nfs nfsroot=192.168.2.100:/nfsroot/ ip=192.168.2.101:192.168.2.100::255.255.255.0::eth0:on console=ttyS0,115200 mem=128M earlyprintk"
CONFIG_FPE_NWFPE=y
CONFIG_NET=y
CONFIG_PACKET=y
@@ -66,5 +66,7 @@ CONFIG_DEBUG_INFO=y
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_ERRORS=y
CONFIG_DEBUG_LL=y
+CONFIG_DEBUG_MMP_UART2=y
+CONFIG_EARLY_PRINTK=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRC_CCITT=y
diff --git a/arch/arm/mach-ks8695/Kconfig b/arch/arm/mach-ks8695/Kconfig
index f5c39a8c2b0..a545976bdbd 100644
--- a/arch/arm/mach-ks8695/Kconfig
+++ b/arch/arm/mach-ks8695/Kconfig
@@ -21,6 +21,67 @@ config MACH_ACS5K
say 'Y' here if you want your kernel to run on the Brivo
Systems LLC, ACS-5000 Master board.
+config MACH_LITE300
+ bool "SecureComputing SG300"
+ help
+ Say 'Y' here if you want your kernel to support the
+ SecureComputing / SnapGear SG300 VPN Internet Router.
+ See http://www.securecomputing.com for more details.
+
+config MACH_SG310
+ bool "McAfee SG310"
+ help
+ Say 'Y' here if you want your kernel to support the
+ McAfee / SnapGear SG310 VPN Internet Router.
+ See http://www.mcafee.com for more details.
+
+config MACH_SE4200
+ bool "SecureComputing SE4200"
+ help
+ Say 'Y' here if you want your kernel to support the
+ SecureComputing / SnapGear SE4200 Secure Wireless VPN
+ Internet Router.
+ See http://www.securecomputing.com for more details.
+
+config MACH_CM4002
+ bool "OpenGear CM4002"
+ help
+ Say 'Y' here if you want your kernel to support the OpenGear
+ CM4002 Secure Access Server. See http://www.opengear.com for
+ more details.
+
+config MACH_CM4008
+ bool "OpenGear CM4008"
+ select MIGHT_HAVE_PCI
+ help
+ Say 'Y' here if you want your kernel to support the OpenGear
+ CM4008 Console Server. See http://www.opengear.com for more
+ details.
+
+config MACH_CM41xx
+ bool "OpenGear CM41xx"
+ select MIGHT_HAVE_PCI
+ help
+ Say 'Y' here if you want your kernel to support the OpenGear
+ CM4016 or CM4048 Console Servers. See http://www.opengear.com for
+ more details.
+
+config MACH_IM4004
+ bool "OpenGear IM4004"
+ select MIGHT_HAVE_PCI
+ help
+ Say 'Y' here if you want your kernel to support the OpenGear
+ IM4004 Secure Access Server. See http://www.opengear.com for
+ more details.
+
+config MACH_IM42xx
+ bool "OpenGear IM42xx"
+ select MIGHT_HAVE_PCI
+ help
+ Say 'Y' here if you want your kernel to support the OpenGear
+ IM4216 or IM4248 Console Servers. See http://www.opengear.com for
+ more details.
+
endmenu
endif
diff --git a/arch/arm/mach-ks8695/Makefile b/arch/arm/mach-ks8695/Makefile
index 853efd9133c..50980e6b1c1 100644
--- a/arch/arm/mach-ks8695/Makefile
+++ b/arch/arm/mach-ks8695/Makefile
@@ -18,3 +18,11 @@ obj-$(CONFIG_LEDS) += leds.o
obj-$(CONFIG_MACH_KS8695) += board-micrel.o
obj-$(CONFIG_MACH_DSM320) += board-dsm320.o
obj-$(CONFIG_MACH_ACS5K) += board-acs5k.o
+obj-$(CONFIG_MACH_LITE300) += board-sg.o
+obj-$(CONFIG_MACH_SG310) += board-sg.o
+obj-$(CONFIG_MACH_SE4200) += board-sg.o
+obj-$(CONFIG_MACH_CM4002) += board-og.o
+obj-$(CONFIG_MACH_CM4008) += board-og.o
+obj-$(CONFIG_MACH_CM41xx) += board-og.o
+obj-$(CONFIG_MACH_IM4004) += board-og.o
+obj-$(CONFIG_MACH_IM42xx) += board-og.o
diff --git a/arch/arm/mach-ks8695/board-og.c b/arch/arm/mach-ks8695/board-og.c
new file mode 100644
index 00000000000..1623ba461e4
--- /dev/null
+++ b/arch/arm/mach-ks8695/board-og.c
@@ -0,0 +1,199 @@
+/*
+ * board-og.c -- support for the OpenGear KS8695 based boards.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/serial_8250.h>
+#include <linux/gpio.h>
+#include <linux/irq.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <mach/devices.h>
+#include <mach/regs-gpio.h>
+#include <mach/gpio-ks8695.h>
+#include "generic.h"
+
+static int og_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+ if (machine_is_im4004() && (slot == 8))
+ return KS8695_IRQ_EXTERN1;
+ return KS8695_IRQ_EXTERN0;
+}
+
+static struct ks8695_pci_cfg __initdata og_pci = {
+ .mode = KS8695_MODE_PCI,
+ .map_irq = og_pci_map_irq,
+};
+
+static void __init og_register_pci(void)
+{
+ /* Initialize the GPIO lines for interrupt mode */
+ ks8695_gpio_interrupt(KS8695_GPIO_0, IRQ_TYPE_LEVEL_LOW);
+
+ /* Cardbus Slot */
+ if (machine_is_im4004())
+ ks8695_gpio_interrupt(KS8695_GPIO_1, IRQ_TYPE_LEVEL_LOW);
+
+ ks8695_init_pci(&og_pci);
+}
+
+/*
+ * The PCI bus reset is driven by a dedicated GPIO line. Toggle it here
+ * and bring the PCI bus out of reset.
+ */
+static void __init og_pci_bus_reset(void)
+{
+ unsigned int rstline = 1;
+
+ /* Some boards use a different GPIO as the PCI reset line */
+ if (machine_is_im4004())
+ rstline = 2;
+ else if (machine_is_im42xx())
+ rstline = 0;
+
+ gpio_request(rstline, "PCI reset");
+ gpio_direction_output(rstline, 0);
+
+ /* Drive a reset on the PCI reset line */
+ gpio_set_value(rstline, 1);
+ gpio_set_value(rstline, 0);
+ mdelay(100);
+ gpio_set_value(rstline, 1);
+ mdelay(100);
+}
+
+/*
+ * Direct connect serial ports (non-PCI that is).
+ */
+#define S8250_PHYS 0x03800000
+#define S8250_VIRT 0xf4000000
+#define S8250_SIZE 0x00100000
+
+static struct __initdata map_desc og_io_desc[] = {
+ {
+ .virtual = S8250_VIRT,
+ .pfn = __phys_to_pfn(S8250_PHYS),
+ .length = S8250_SIZE,
+ .type = MT_DEVICE,
+ }
+};
+
+static struct resource og_uart_resources[] = {
+ {
+ .start = S8250_VIRT,
+ .end = S8250_VIRT + S8250_SIZE,
+ .flags = IORESOURCE_MEM
+ },
+};
+
+static struct plat_serial8250_port og_uart_data[] = {
+ {
+ .mapbase = S8250_VIRT,
+ .membase = (char *) S8250_VIRT,
+ .irq = 3,
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+ .iotype = UPIO_MEM,
+ .regshift = 2,
+ .uartclk = 115200 * 16,
+ },
+ { },
+};
+
+static struct platform_device og_uart = {
+ .name = "serial8250",
+ .id = 0,
+ .dev.platform_data = og_uart_data,
+ .num_resources = 1,
+ .resource = og_uart_resources
+};
+
+static struct platform_device *og_devices[] __initdata = {
+ &og_uart
+};
+
+static void __init og_init(void)
+{
+ ks8695_register_gpios();
+
+ if (machine_is_cm4002()) {
+ ks8695_gpio_interrupt(KS8695_GPIO_1, IRQ_TYPE_LEVEL_HIGH);
+ iotable_init(og_io_desc, ARRAY_SIZE(og_io_desc));
+ platform_add_devices(og_devices, ARRAY_SIZE(og_devices));
+ } else {
+ og_pci_bus_reset();
+ og_register_pci();
+ }
+
+ ks8695_add_device_lan();
+ ks8695_add_device_wan();
+}
+
+#ifdef CONFIG_MACH_CM4002
+MACHINE_START(CM4002, "OpenGear/CM4002")
+ /* OpenGear Inc. */
+ .atag_offset = 0x100,
+ .map_io = ks8695_map_io,
+ .init_irq = ks8695_init_irq,
+ .init_machine = og_init,
+ .timer = &ks8695_timer,
+ .restart = ks8695_restart,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_CM4008
+MACHINE_START(CM4008, "OpenGear/CM4008")
+ /* OpenGear Inc. */
+ .atag_offset = 0x100,
+ .map_io = ks8695_map_io,
+ .init_irq = ks8695_init_irq,
+ .init_machine = og_init,
+ .timer = &ks8695_timer,
+ .restart = ks8695_restart,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_CM41xx
+MACHINE_START(CM41XX, "OpenGear/CM41xx")
+ /* OpenGear Inc. */
+ .atag_offset = 0x100,
+ .map_io = ks8695_map_io,
+ .init_irq = ks8695_init_irq,
+ .init_machine = og_init,
+ .timer = &ks8695_timer,
+ .restart = ks8695_restart,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_IM4004
+MACHINE_START(IM4004, "OpenGear/IM4004")
+ /* OpenGear Inc. */
+ .atag_offset = 0x100,
+ .map_io = ks8695_map_io,
+ .init_irq = ks8695_init_irq,
+ .init_machine = og_init,
+ .timer = &ks8695_timer,
+ .restart = ks8695_restart,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_IM42xx
+MACHINE_START(IM42XX, "OpenGear/IM42xx")
+ /* OpenGear Inc. */
+ .atag_offset = 0x100,
+ .map_io = ks8695_map_io,
+ .init_irq = ks8695_init_irq,
+ .init_machine = og_init,
+ .timer = &ks8695_timer,
+ .restart = ks8695_restart,
+MACHINE_END
+#endif
diff --git a/arch/arm/mach-ks8695/board-sg.c b/arch/arm/mach-ks8695/board-sg.c
new file mode 100644
index 00000000000..f35b98b5bf3
--- /dev/null
+++ b/arch/arm/mach-ks8695/board-sg.c
@@ -0,0 +1,121 @@
+/*
+ * board-sg.c -- support for the SnapGear KS8695 based boards
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/partitions.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/devices.h>
+#include "generic.h"
+
+/*
+ * The SG310 machine type is fitted with a conventional 8MB Strataflash
+ * device. Define its partitioning.
+ */
+#define FL_BASE 0x02000000
+#define FL_SIZE SZ_8M
+
+static struct mtd_partition sg_mtd_partitions[] = {
+ [0] = {
+ .name = "SnapGear Boot Loader",
+ .size = SZ_128K,
+ },
+ [1] = {
+ .name = "SnapGear non-volatile configuration",
+ .size = SZ_512K,
+ .offset = SZ_256K,
+ },
+ [2] = {
+ .name = "SnapGear image",
+ .offset = SZ_512K + SZ_256K,
+ },
+ [3] = {
+ .name = "SnapGear StrataFlash",
+ },
+ [4] = {
+ .name = "SnapGear Boot Tags",
+ .size = SZ_128K,
+ .offset = SZ_128K,
+ },
+};
+
+static struct physmap_flash_data sg_mtd_pdata = {
+ .width = 1,
+ .nr_parts = ARRAY_SIZE(sg_mtd_partitions),
+ .parts = sg_mtd_partitions,
+};
+
+
+static struct resource sg_mtd_resource[] = {
+ [0] = {
+ .start = FL_BASE,
+ .end = FL_BASE + FL_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device sg_mtd_device = {
+ .name = "physmap-flash",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(sg_mtd_resource),
+ .resource = sg_mtd_resource,
+ .dev = {
+ .platform_data = &sg_mtd_pdata,
+ },
+};
+
+static void __init sg_init(void)
+{
+ ks8695_add_device_lan();
+ ks8695_add_device_wan();
+
+ if (machine_is_sg310())
+ platform_device_register(&sg_mtd_device);
+}
+
+#ifdef CONFIG_MACH_LITE300
+MACHINE_START(LITE300, "SecureComputing/SG300")
+ /* SnapGear */
+ .atag_offset = 0x100,
+ .map_io = ks8695_map_io,
+ .init_irq = ks8695_init_irq,
+ .init_machine = sg_init,
+ .timer = &ks8695_timer,
+ .restart = ks8695_restart,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_SG310
+MACHINE_START(SG310, "McAfee/SG310")
+ /* SnapGear */
+ .atag_offset = 0x100,
+ .map_io = ks8695_map_io,
+ .init_irq = ks8695_init_irq,
+ .init_machine = sg_init,
+ .timer = &ks8695_timer,
+ .restart = ks8695_restart,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_SE4200
+MACHINE_START(SE4200, "SecureComputing/SE4200")
+ /* SnapGear */
+ .atag_offset = 0x100,
+ .map_io = ks8695_map_io,
+ .init_irq = ks8695_init_irq,
+ .init_machine = sg_init,
+ .timer = &ks8695_timer,
+ .restart = ks8695_restart,
+MACHINE_END
+#endif
diff --git a/arch/arm/mach-mmp/include/mach/debug-macro.S b/arch/arm/mach-mmp/include/mach/debug-macro.S
index b6f14d203c2..5c3cc29688a 100644
--- a/arch/arm/mach-mmp/include/mach/debug-macro.S
+++ b/arch/arm/mach-mmp/include/mach/debug-macro.S
@@ -9,13 +9,21 @@
* published by the Free Software Foundation.
*/
+#if defined(CONFIG_DEBUG_MMP_UART2)
+#define MMP_UART_OFFSET 0x00017000
+#elif defined(CONFIG_DEBUG_MMP_UART3)
+#define MMP_UART_OFFSET 0x00018000
+#else
+#error "Select uart for DEBUG_LL"
+#endif
+
#include <mach/addr-map.h>
.macro addruart, rp, rv, tmp
ldr \rp, =APB_PHYS_BASE @ physical
ldr \rv, =APB_VIRT_BASE @ virtual
- orr \rp, \rp, #0x00017000
- orr \rv, \rv, #0x00017000
+ orr \rp, \rp, #MMP_UART_OFFSET
+ orr \rv, \rv, #MMP_UART_OFFSET
.endm
#define UART_SHIFT 2
diff --git a/arch/arm/mach-mmp/ttc_dkb.c b/arch/arm/mach-mmp/ttc_dkb.c
index 7a7de2b12a6..ce55fd8821c 100644
--- a/arch/arm/mach-mmp/ttc_dkb.c
+++ b/arch/arm/mach-mmp/ttc_dkb.c
@@ -177,12 +177,22 @@ static struct mv_usb_platform_data ttc_usb_pdata = {
#endif
#endif
+#ifdef CONFIG_MTD_NAND_PXA3xx
+static struct pxa3xx_nand_platform_data dkb_nand_info = {
+ .enable_arbiter = 1,
+ .num_cs = 1,
+};
+#endif
+
static void __init ttc_dkb_init(void)
{
mfp_config(ARRAY_AND_SIZE(ttc_dkb_pin_config));
/* on-chip devices */
pxa910_add_uart(1);
+#ifdef CONFIG_MTD_NAND_PXA3xx
+ pxa910_add_nand(&dkb_nand_info);
+#endif
/* off-chip devices */
pxa910_add_twsi(0, NULL, ARRAY_AND_SIZE(ttc_dkb_i2c_info));
generated by cgit v1.2.3 (git 2.25.1) at 2024-09-13 10:41:50 +0000