diff options
Diffstat (limited to 'arch/arm')
115 files changed, 4307 insertions, 2319 deletions
diff --git a/arch/arm/common/scoop.c b/arch/arm/common/scoop.c index 7713a08bb10..37bda5f3dde 100644 --- a/arch/arm/common/scoop.c +++ b/arch/arm/common/scoop.c @@ -82,7 +82,7 @@ static int scoop_gpio_get(struct gpio_chip *chip, unsigned offset) { struct scoop_dev *sdev = container_of(chip, struct scoop_dev, gpio); - /* XXX: I'm usure, but it seems so */ + /* XXX: I'm unsure, but it seems so */ return ioread16(sdev->base + SCOOP_GPRR) & (1 << (offset + 1)); } diff --git a/arch/arm/configs/da830_omapl137_defconfig b/arch/arm/configs/da830_omapl137_defconfig deleted file mode 100644 index 7c8e38f5c5a..00000000000 --- a/arch/arm/configs/da830_omapl137_defconfig +++ /dev/null @@ -1,1254 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc2-davinci1 -# Wed May 13 15:33:29 2009 -# -CONFIG_ARM=y -CONFIG_SYS_SUPPORTS_APM_EMULATION=y -CONFIG_GENERIC_GPIO=y -CONFIG_GENERIC_TIME=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_MMU=y -# CONFIG_NO_IOPORT is not set -CONFIG_GENERIC_HARDIRQS=y -CONFIG_STACKTRACE_SUPPORT=y -CONFIG_HAVE_LATENCYTOP_SUPPORT=y -CONFIG_LOCKDEP_SUPPORT=y -CONFIG_TRACE_IRQFLAGS_SUPPORT=y -CONFIG_HARDIRQS_SW_RESEND=y -CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set -CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_ZONE_DMA=y -CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y -CONFIG_VECTORS_BASE=0xffff0000 -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" - -# -# General setup -# -CONFIG_EXPERIMENTAL=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_LOCK_KERNEL=y -CONFIG_INIT_ENV_ARG_LIMIT=32 -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -CONFIG_SYSVIPC_SYSCTL=y -CONFIG_POSIX_MQUEUE=y -CONFIG_POSIX_MQUEUE_SYSCTL=y -# CONFIG_BSD_PROCESS_ACCT is not set -# CONFIG_TASKSTATS is not set -# CONFIG_AUDIT is not set - -# -# RCU Subsystem -# -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_GROUP_SCHED=y -CONFIG_FAIR_GROUP_SCHED=y -# CONFIG_RT_GROUP_SCHED is not set -CONFIG_USER_SCHED=y -# CONFIG_CGROUP_SCHED is not set -# CONFIG_CGROUPS is not set -CONFIG_SYSFS_DEPRECATED=y -CONFIG_SYSFS_DEPRECATED_V2=y -# CONFIG_RELAY is not set -# CONFIG_NAMESPACES is not set -CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" -CONFIG_RD_GZIP=y -# CONFIG_RD_BZIP2 is not set -# CONFIG_RD_LZMA is not set -CONFIG_CC_OPTIMIZE_FOR_SIZE=y -CONFIG_SYSCTL=y -CONFIG_ANON_INODES=y -CONFIG_EMBEDDED=y -CONFIG_UID16=y -CONFIG_SYSCTL_SYSCALL=y -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_ALL is not set -# CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_STRIP_ASM_SYMS is not set -CONFIG_HOTPLUG=y -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_ELF_CORE=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_EPOLL=y -CONFIG_SIGNALFD=y -CONFIG_TIMERFD=y -CONFIG_EVENTFD=y -CONFIG_SHMEM=y -CONFIG_AIO=y -CONFIG_VM_EVENT_COUNTERS=y -CONFIG_SLUB_DEBUG=y -CONFIG_COMPAT_BRK=y -# CONFIG_SLAB is not set -CONFIG_SLUB=y -# CONFIG_SLOB is not set -# CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set -CONFIG_HAVE_OPROFILE=y -# CONFIG_KPROBES is not set -CONFIG_HAVE_KPROBES=y -CONFIG_HAVE_KRETPROBES=y -CONFIG_HAVE_CLK=y -# CONFIG_SLOW_WORK is not set -CONFIG_HAVE_GENERIC_DMA_COHERENT=y -CONFIG_SLABINFO=y -CONFIG_RT_MUTEXES=y -CONFIG_BASE_SMALL=0 -CONFIG_MODULES=y -# CONFIG_MODULE_FORCE_LOAD is not set -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -CONFIG_MODVERSIONS=y -# CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_BLOCK=y -# CONFIG_LBD is not set -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_BLK_DEV_INTEGRITY is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_DEFAULT_AS=y -# CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" -# CONFIG_FREEZER is not set - -# -# System Type -# -# CONFIG_ARCH_AAEC2000 is not set -# CONFIG_ARCH_INTEGRATOR is not set -# CONFIG_ARCH_REALVIEW is not set -# CONFIG_ARCH_VERSATILE is not set -# CONFIG_ARCH_AT91 is not set -# CONFIG_ARCH_CLPS711X is not set -# CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_EP93XX is not set -# CONFIG_ARCH_GEMINI is not set -# CONFIG_ARCH_FOOTBRIDGE is not set -# CONFIG_ARCH_NETX is not set -# CONFIG_ARCH_H720X is not set -# CONFIG_ARCH_IMX is not set -# CONFIG_ARCH_IOP13XX is not set -# CONFIG_ARCH_IOP32X is not set -# CONFIG_ARCH_IOP33X is not set -# CONFIG_ARCH_IXP23XX is not set -# CONFIG_ARCH_IXP2000 is not set -# CONFIG_ARCH_IXP4XX is not set -# CONFIG_ARCH_L7200 is not set -# CONFIG_ARCH_KIRKWOOD is not set -# CONFIG_ARCH_KS8695 is not set -# CONFIG_ARCH_NS9XXX is not set -# CONFIG_ARCH_LOKI is not set -# CONFIG_ARCH_MV78XX0 is not set -# CONFIG_ARCH_MXC is not set -# CONFIG_ARCH_ORION5X is not set -# CONFIG_ARCH_PNX4008 is not set -# CONFIG_ARCH_PXA is not set -# CONFIG_ARCH_MMP is not set -# CONFIG_ARCH_RPC is not set -# CONFIG_ARCH_SA1100 is not set -# CONFIG_ARCH_S3C2410 is not set -# CONFIG_ARCH_S3C64XX is not set -# CONFIG_ARCH_SHARK is not set -# CONFIG_ARCH_LH7A40X is not set -CONFIG_ARCH_DAVINCI=y -# CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_MSM is not set -# CONFIG_ARCH_W90X900 is not set -CONFIG_CP_INTC=y - -# -# TI DaVinci Implementations -# - -# -# DaVinci Core Type -# -# CONFIG_ARCH_DAVINCI_DM644x is not set -# CONFIG_ARCH_DAVINCI_DM646x is not set -# CONFIG_ARCH_DAVINCI_DM355 is not set -CONFIG_ARCH_DAVINCI_DA830=y - -# -# DaVinci Board Type -# -CONFIG_MACH_DAVINCI_DA830_EVM=y -CONFIG_DAVINCI_MUX=y -# CONFIG_DAVINCI_MUX_DEBUG is not set -# CONFIG_DAVINCI_MUX_WARNINGS is not set -CONFIG_DAVINCI_RESET_CLOCKS=y - -# -# Processor Type -# -CONFIG_CPU_32=y -CONFIG_CPU_ARM926T=y -CONFIG_CPU_32v5=y -CONFIG_CPU_ABRT_EV5TJ=y -CONFIG_CPU_PABRT_NOIFAR=y -CONFIG_CPU_CACHE_VIVT=y -CONFIG_CPU_COPY_V4WB=y -CONFIG_CPU_TLB_V4WBI=y -CONFIG_CPU_CP15=y -CONFIG_CPU_CP15_MMU=y - -# -# Processor Features -# -CONFIG_ARM_THUMB=y -# CONFIG_CPU_ICACHE_DISABLE is not set -# CONFIG_CPU_DCACHE_DISABLE is not set -CONFIG_CPU_DCACHE_WRITETHROUGH=y -# CONFIG_CPU_CACHE_ROUND_ROBIN is not set -# CONFIG_OUTER_CACHE is not set -CONFIG_COMMON_CLKDEV=y - -# -# Bus support -# -# CONFIG_PCI_SYSCALL is not set -# CONFIG_ARCH_SUPPORTS_MSI is not set -# CONFIG_PCCARD is not set - -# -# Kernel Features -# -CONFIG_TICK_ONESHOT=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_GENERIC_CLOCKEVENTS_BUILD=y -CONFIG_VMSPLIT_3G=y -# CONFIG_VMSPLIT_2G is not set -# CONFIG_VMSPLIT_1G is not set -CONFIG_PAGE_OFFSET=0xC0000000 -CONFIG_PREEMPT=y -CONFIG_HZ=100 -CONFIG_AEABI=y -# CONFIG_OABI_COMPAT is not set -CONFIG_ARCH_FLATMEM_HAS_HOLES=y -# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set -# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set -# CONFIG_HIGHMEM is not set -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -CONFIG_PAGEFLAGS_EXTENDED=y -CONFIG_SPLIT_PTLOCK_CPUS=4096 -# CONFIG_PHYS_ADDR_T_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 -CONFIG_BOUNCE=y -CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_MLOCKED_PAGE_BIT=y -CONFIG_LEDS=y -# CONFIG_LEDS_CPU is not set -CONFIG_ALIGNMENT_TRAP=y - -# -# Boot options -# -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="" -# CONFIG_XIP_KERNEL is not set -# CONFIG_KEXEC is not set - -# -# CPU Power Management -# -# CONFIG_CPU_IDLE is not set - -# -# Floating point emulation -# - -# -# At least one emulation must be selected -# -# CONFIG_VFP is not set - -# -# Userspace binary formats -# -CONFIG_BINFMT_ELF=y -# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set -CONFIG_HAVE_AOUT=y -# CONFIG_BINFMT_AOUT is not set -# CONFIG_BINFMT_MISC is not set - -# -# Power management options -# -# CONFIG_PM is not set -CONFIG_ARCH_SUSPEND_POSSIBLE=y -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -CONFIG_UNIX=y -CONFIG_XFRM=y -# CONFIG_XFRM_USER is not set -# CONFIG_XFRM_SUB_POLICY is not set -# CONFIG_XFRM_MIGRATE is not set -# CONFIG_XFRM_STATISTICS is not set -# CONFIG_NET_KEY is not set -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -# CONFIG_IP_PNP_BOOTP is not set -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_XFRM_TUNNEL is not set -CONFIG_INET_TUNNEL=m -CONFIG_INET_XFRM_MODE_TRANSPORT=y -CONFIG_INET_XFRM_MODE_TUNNEL=y -CONFIG_INET_XFRM_MODE_BEET=y -# CONFIG_INET_LRO is not set -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_CUBIC=y -CONFIG_DEFAULT_TCP_CONG="cubic" -# CONFIG_TCP_MD5SIG is not set -CONFIG_IPV6=m -# CONFIG_IPV6_PRIVACY is not set -# CONFIG_IPV6_ROUTER_PREF is not set -# CONFIG_IPV6_OPTIMISTIC_DAD is not set -# CONFIG_INET6_AH is not set -# CONFIG_INET6_ESP is not set -# CONFIG_INET6_IPCOMP is not set -# CONFIG_IPV6_MIP6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set -CONFIG_INET6_XFRM_MODE_TRANSPORT=m -CONFIG_INET6_XFRM_MODE_TUNNEL=m -CONFIG_INET6_XFRM_MODE_BEET=m -# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set -CONFIG_IPV6_SIT=m -CONFIG_IPV6_NDISC_NODETYPE=y -# CONFIG_IPV6_TUNNEL is not set -# CONFIG_IPV6_MULTIPLE_TABLES is not set -# CONFIG_IPV6_MROUTE is not set -# CONFIG_NETWORK_SECMARK is not set -CONFIG_NETFILTER=y -# CONFIG_NETFILTER_DEBUG is not set -CONFIG_NETFILTER_ADVANCED=y - -# -# Core Netfilter Configuration -# -# CONFIG_NETFILTER_NETLINK_QUEUE is not set -# CONFIG_NETFILTER_NETLINK_LOG is not set -# CONFIG_NF_CONNTRACK is not set -# CONFIG_NETFILTER_XTABLES is not set -# CONFIG_IP_VS is not set - -# -# IP: Netfilter Configuration -# -# CONFIG_NF_DEFRAG_IPV4 is not set -# CONFIG_IP_NF_QUEUE is not set -# CONFIG_IP_NF_IPTABLES is not set -# CONFIG_IP_NF_ARPTABLES is not set - -# -# IPv6: Netfilter Configuration -# -# CONFIG_IP6_NF_QUEUE is not set -# CONFIG_IP6_NF_IPTABLES is not set -# CONFIG_IP_DCCP is not set -# CONFIG_IP_SCTP is not set -# CONFIG_TIPC is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_NET_DSA is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_PHONET is not set -# CONFIG_NET_SCHED is not set -# CONFIG_DCB is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -# CONFIG_CAN is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -# CONFIG_AF_RXRPC is not set -# CONFIG_WIRELESS is not set -# CONFIG_WIMAX is not set -# CONFIG_RFKILL is not set -# CONFIG_NET_9P is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_FW_LOADER is not set -# CONFIG_DEBUG_DRIVER is not set -# CONFIG_DEBUG_DEVRES is not set -# CONFIG_SYS_HYPERVISOR is not set -# CONFIG_CONNECTOR is not set -# CONFIG_MTD is not set -# CONFIG_PARPORT is not set -CONFIG_BLK_DEV=y -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=m -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -# CONFIG_BLK_DEV_NBD is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=1 -CONFIG_BLK_DEV_RAM_SIZE=32768 -# CONFIG_BLK_DEV_XIP is not set -# CONFIG_CDROM_PKTCDVD is not set -# CONFIG_ATA_OVER_ETH is not set -CONFIG_MISC_DEVICES=y -# CONFIG_ICS932S401 is not set -# CONFIG_ENCLOSURE_SERVICES is not set -# CONFIG_ISL29003 is not set -# CONFIG_C2PORT is not set - -# -# EEPROM support -# -CONFIG_EEPROM_AT24=y -# CONFIG_EEPROM_LEGACY is not set -# CONFIG_EEPROM_93CX6 is not set -CONFIG_HAVE_IDE=y -# CONFIG_IDE is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -CONFIG_SCSI=m -CONFIG_SCSI_DMA=y -# CONFIG_SCSI_TGT is not set -# CONFIG_SCSI_NETLINK is not set -CONFIG_SCSI_PROC_FS=y - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=m -# CONFIG_CHR_DEV_ST is not set -# CONFIG_CHR_DEV_OSST is not set -# CONFIG_BLK_DEV_SR is not set -# CONFIG_CHR_DEV_SG is not set -# CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# -# CONFIG_SCSI_MULTI_LUN is not set -# CONFIG_SCSI_CONSTANTS is not set -# CONFIG_SCSI_LOGGING is not set -# CONFIG_SCSI_SCAN_ASYNC is not set -CONFIG_SCSI_WAIT_SCAN=m - -# -# SCSI Transports -# -# CONFIG_SCSI_SPI_ATTRS is not set -# CONFIG_SCSI_FC_ATTRS is not set -# CONFIG_SCSI_ISCSI_ATTRS is not set -# CONFIG_SCSI_SAS_LIBSAS is not set -# CONFIG_SCSI_SRP_ATTRS is not set -CONFIG_SCSI_LOWLEVEL=y -# CONFIG_ISCSI_TCP is not set -# CONFIG_LIBFC is not set -# CONFIG_LIBFCOE is not set -# CONFIG_SCSI_DEBUG is not set -# CONFIG_SCSI_DH is not set -# CONFIG_SCSI_OSD_INITIATOR is not set -# CONFIG_ATA is not set -# CONFIG_MD is not set -CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_MACVLAN is not set -# CONFIG_EQUALIZER is not set -CONFIG_TUN=m -# CONFIG_VETH is not set -CONFIG_PHYLIB=y - -# -# MII PHY device drivers -# -# CONFIG_MARVELL_PHY is not set -# CONFIG_DAVICOM_PHY is not set -# CONFIG_QSEMI_PHY is not set -CONFIG_LXT_PHY=y -# CONFIG_CICADA_PHY is not set -# CONFIG_VITESSE_PHY is not set -# CONFIG_SMSC_PHY is not set -# CONFIG_BROADCOM_PHY is not set -# CONFIG_ICPLUS_PHY is not set -# CONFIG_REALTEK_PHY is not set -# CONFIG_NATIONAL_PHY is not set -# CONFIG_STE10XP is not set -CONFIG_LSI_ET1011C_PHY=y -# CONFIG_FIXED_PHY is not set -# CONFIG_MDIO_BITBANG is not set -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -# CONFIG_AX88796 is not set -# CONFIG_SMC91X is not set -CONFIG_TI_DAVINCI_EMAC=y -# CONFIG_DM9000 is not set -# CONFIG_ETHOC is not set -# CONFIG_SMC911X is not set -# CONFIG_SMSC911X is not set -# CONFIG_DNET is not set -# CONFIG_IBM_NEW_EMAC_ZMII is not set -# CONFIG_IBM_NEW_EMAC_RGMII is not set -# CONFIG_IBM_NEW_EMAC_TAH is not set -# CONFIG_IBM_NEW_EMAC_EMAC4 is not set -# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set -# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set -# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set -# CONFIG_B44 is not set -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set - -# -# Wireless LAN -# -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set - -# -# Enable WiMAX (Networking options) to see the WiMAX drivers -# -# CONFIG_WAN is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -CONFIG_NETCONSOLE=y -# CONFIG_NETCONSOLE_DYNAMIC is not set -CONFIG_NETPOLL=y -CONFIG_NETPOLL_TRAP=y -CONFIG_NET_POLL_CONTROLLER=y -# CONFIG_ISDN is not set - -# -# Input device support -# -CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set -# CONFIG_INPUT_POLLDEV is not set - -# -# Userland interfaces -# -CONFIG_INPUT_MOUSEDEV=m -CONFIG_INPUT_MOUSEDEV_PSAUX=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -# CONFIG_INPUT_JOYDEV is not set -CONFIG_INPUT_EVDEV=m -CONFIG_INPUT_EVBUG=m - -# -# Input Device Drivers -# -CONFIG_INPUT_KEYBOARD=y -CONFIG_KEYBOARD_ATKBD=m -# CONFIG_KEYBOARD_SUNKBD is not set -# CONFIG_KEYBOARD_LKKBD is not set -CONFIG_KEYBOARD_XTKBD=m -# CONFIG_KEYBOARD_NEWTON is not set -# CONFIG_KEYBOARD_STOWAWAY is not set -CONFIG_KEYBOARD_GPIO=y -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TABLET is not set -CONFIG_INPUT_TOUCHSCREEN=y -# CONFIG_TOUCHSCREEN_AD7879_I2C is not set -# CONFIG_TOUCHSCREEN_AD7879 is not set -# CONFIG_TOUCHSCREEN_FUJITSU is not set -# CONFIG_TOUCHSCREEN_GUNZE is not set -# CONFIG_TOUCHSCREEN_ELO is not set -# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set -# CONFIG_TOUCHSCREEN_MTOUCH is not set -# CONFIG_TOUCHSCREEN_INEXIO is not set -# CONFIG_TOUCHSCREEN_MK712 is not set -# CONFIG_TOUCHSCREEN_PENMOUNT is not set -# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set -# CONFIG_TOUCHSCREEN_TOUCHWIN is not set -# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set -# CONFIG_TOUCHSCREEN_TSC2007 is not set -# CONFIG_INPUT_MISC is not set - -# -# Hardware I/O ports -# -CONFIG_SERIO=y -CONFIG_SERIO_SERPORT=y -CONFIG_SERIO_LIBPS2=y -# CONFIG_SERIO_RAW is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -CONFIG_VT=y -CONFIG_CONSOLE_TRANSLATIONS=y -# CONFIG_VT_CONSOLE is not set -CONFIG_HW_CONSOLE=y -# CONFIG_VT_HW_CONSOLE_BINDING is not set -CONFIG_DEVKMEM=y -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_NR_UARTS=3 -CONFIG_SERIAL_8250_RUNTIME_UARTS=3 -# CONFIG_SERIAL_8250_EXTENDED is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_UNIX98_PTYS=y -# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 -# CONFIG_IPMI_HANDLER is not set -CONFIG_HW_RANDOM=m -# CONFIG_HW_RANDOM_TIMERIOMEM is not set -# CONFIG_R3964 is not set -# CONFIG_RAW_DRIVER is not set -# CONFIG_TCG_TPM is not set -CONFIG_I2C=y -CONFIG_I2C_BOARDINFO=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_HELPER_AUTO=y - -# -# I2C Hardware Bus support -# - -# -# I2C system bus drivers (mostly embedded / system-on-chip) -# -CONFIG_I2C_DAVINCI=y -# CONFIG_I2C_GPIO is not set -# CONFIG_I2C_OCORES is not set -# CONFIG_I2C_SIMTEC is not set - -# -# External I2C/SMBus adapter drivers -# -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_TAOS_EVM is not set - -# -# Other I2C/SMBus bus drivers -# -# CONFIG_I2C_PCA_PLATFORM is not set -# CONFIG_I2C_STUB is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_MAX6875 is not set -# CONFIG_SENSORS_TSL2550 is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set -# CONFIG_SPI is not set -CONFIG_ARCH_REQUIRE_GPIOLIB=y -CONFIG_GPIOLIB=y -# CONFIG_DEBUG_GPIO is not set -# CONFIG_GPIO_SYSFS is not set - -# -# Memory mapped GPIO expanders: -# - -# -# I2C GPIO expanders: -# -# CONFIG_GPIO_MAX732X is not set -# CONFIG_GPIO_PCA953X is not set -CONFIG_GPIO_PCF857X=m - -# -# PCI GPIO expanders: -# - -# -# SPI GPIO expanders: -# -# CONFIG_W1 is not set -# CONFIG_POWER_SUPPLY is not set -# CONFIG_HWMON is not set -# CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set -CONFIG_WATCHDOG=y -# CONFIG_WATCHDOG_NOWAYOUT is not set - -# -# Watchdog Device Drivers -# -# CONFIG_SOFT_WATCHDOG is not set -# CONFIG_DAVINCI_WATCHDOG is not set -CONFIG_SSB_POSSIBLE=y - -# -# Sonics Silicon Backplane -# -# CONFIG_SSB is not set - -# -# Multifunction device drivers -# -# CONFIG_MFD_CORE is not set -# CONFIG_MFD_SM501 is not set -# CONFIG_MFD_ASIC3 is not set -# CONFIG_HTC_EGPIO is not set -# CONFIG_HTC_PASIC3 is not set -# CONFIG_TPS65010 is not set -# CONFIG_TWL4030_CORE is not set -# CONFIG_MFD_TMIO is not set -# CONFIG_MFD_T7L66XB is not set -# CONFIG_MFD_TC6387XB is not set -# CONFIG_MFD_TC6393XB is not set -# CONFIG_PMIC_DA903X is not set -# CONFIG_MFD_WM8400 is not set -# CONFIG_MFD_WM8350_I2C is not set -# CONFIG_MFD_PCF50633 is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set - -# -# Graphics support -# -# CONFIG_VGASTATE is not set -# CONFIG_VIDEO_OUTPUT_CONTROL is not set -# CONFIG_FB is not set -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set - -# -# Display device support -# -# CONFIG_DISPLAY_SUPPORT is not set - -# -# Console display driver support -# -# CONFIG_VGA_CONSOLE is not set -CONFIG_DUMMY_CONSOLE=y -CONFIG_SOUND=m -# CONFIG_SOUND_OSS_CORE is not set -CONFIG_SND=m -CONFIG_SND_TIMER=m -CONFIG_SND_PCM=m -CONFIG_SND_JACK=y -# CONFIG_SND_SEQUENCER is not set -# CONFIG_SND_MIXER_OSS is not set -# CONFIG_SND_PCM_OSS is not set -# CONFIG_SND_HRTIMER is not set -# CONFIG_SND_DYNAMIC_MINORS is not set -CONFIG_SND_SUPPORT_OLD_API=y -CONFIG_SND_VERBOSE_PROCFS=y -# CONFIG_SND_VERBOSE_PRINTK is not set -# CONFIG_SND_DEBUG is not set -CONFIG_SND_DRIVERS=y -# CONFIG_SND_DUMMY is not set -# CONFIG_SND_MTPAV is not set -# CONFIG_SND_SERIAL_U16550 is not set -# CONFIG_SND_MPU401 is not set -CONFIG_SND_ARM=y -CONFIG_SND_SOC=m -CONFIG_SND_DAVINCI_SOC=m -CONFIG_SND_SOC_I2C_AND_SPI=m -# CONFIG_SND_SOC_ALL_CODECS is not set -# CONFIG_SOUND_PRIME is not set -# CONFIG_HID_SUPPORT is not set -# CONFIG_USB_SUPPORT is not set -# CONFIG_USB_MUSB_HOST is not set -# CONFIG_USB_MUSB_PERIPHERAL is not set -# CONFIG_USB_MUSB_OTG is not set -# CONFIG_USB_GADGET_MUSB_HDRC is not set -# CONFIG_USB_GADGET_AT91 is not set -# CONFIG_USB_GADGET_ATMEL_USBA is not set -# CONFIG_USB_GADGET_FSL_USB2 is not set -# CONFIG_USB_GADGET_LH7A40X is not set -# CONFIG_USB_GADGET_OMAP is not set -# CONFIG_USB_GADGET_PXA25X is not set -# CONFIG_USB_GADGET_PXA27X is not set -# CONFIG_USB_GADGET_S3C2410 is not set -# CONFIG_USB_GADGET_IMX is not set -# CONFIG_USB_GADGET_M66592 is not set -# CONFIG_USB_GADGET_AMD5536UDC is not set -# CONFIG_USB_GADGET_FSL_QE is not set -# CONFIG_USB_GADGET_CI13XXX is not set -# CONFIG_USB_GADGET_NET2280 is not set -# CONFIG_USB_GADGET_GOKU is not set -# CONFIG_USB_GADGET_DUMMY_HCD is not set -# CONFIG_USB_ZERO is not set -# CONFIG_USB_ETH is not set -# CONFIG_USB_GADGETFS is not set -# CONFIG_USB_FILE_STORAGE is not set -# CONFIG_USB_G_SERIAL is not set -# CONFIG_USB_MIDI_GADGET is not set -# CONFIG_USB_G_PRINTER is not set -# CONFIG_USB_CDC_COMPOSITE is not set -# CONFIG_MMC is not set -# CONFIG_MEMSTICK is not set -# CONFIG_ACCESSIBILITY is not set -# CONFIG_NEW_LEDS is not set -CONFIG_RTC_LIB=y -# CONFIG_RTC_CLASS is not set -# CONFIG_DMADEVICES is not set -# CONFIG_AUXDISPLAY is not set -# CONFIG_REGULATOR is not set -# CONFIG_UIO is not set -# CONFIG_STAGING is not set - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -# CONFIG_EXT2_FS_XIP is not set -CONFIG_EXT3_FS=y -# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set -CONFIG_EXT3_FS_XATTR=y -# CONFIG_EXT3_FS_POSIX_ACL is not set -# CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4_FS is not set -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -CONFIG_FS_MBCACHE=y -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -# CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y -CONFIG_XFS_FS=m -# CONFIG_XFS_QUOTA is not set -# CONFIG_XFS_POSIX_ACL is not set -# CONFIG_XFS_RT is not set -# CONFIG_XFS_DEBUG is not set -# CONFIG_OCFS2_FS is not set -# CONFIG_BTRFS_FS is not set -CONFIG_DNOTIFY=y -CONFIG_INOTIFY=y -CONFIG_INOTIFY_USER=y -# CONFIG_QUOTA is not set -# CONFIG_AUTOFS_FS is not set -CONFIG_AUTOFS4_FS=m -# CONFIG_FUSE_FS is not set - -# -# Caches -# -# CONFIG_FSCACHE is not set - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -CONFIG_FAT_FS=y -CONFIG_MSDOS_FS=y -CONFIG_VFAT_FS=y -CONFIG_FAT_DEFAULT_CODEPAGE=437 -CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_SYSCTL=y -CONFIG_PROC_PAGE_MONITOR=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -# CONFIG_TMPFS_POSIX_ACL is not set -# CONFIG_HUGETLB_PAGE is not set -# CONFIG_CONFIGFS_FS is not set -CONFIG_MISC_FILESYSTEMS=y -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -CONFIG_CRAMFS=y -# CONFIG_SQUASHFS is not set -# CONFIG_VXFS_FS is not set -CONFIG_MINIX_FS=m -# CONFIG_OMFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_ROMFS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set -CONFIG_NETWORK_FILESYSTEMS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -# CONFIG_NFS_V3_ACL is not set -# CONFIG_NFS_V4 is not set -CONFIG_ROOT_NFS=y -CONFIG_NFSD=m -CONFIG_NFSD_V3=y -# CONFIG_NFSD_V3_ACL is not set -# CONFIG_NFSD_V4 is not set -CONFIG_LOCKD=y -CONFIG_LOCKD_V4=y -CONFIG_EXPORTFS=m -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_RPCSEC_GSS_SPKM3 is not set -CONFIG_SMB_FS=m -# CONFIG_SMB_NLS_DEFAULT is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -CONFIG_MSDOS_PARTITION=y -# CONFIG_BSD_DISKLABEL is not set -# CONFIG_MINIX_SUBPARTITION is not set -# CONFIG_SOLARIS_X86_PARTITION is not set -# CONFIG_UNIXWARE_DISKLABEL is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -# CONFIG_KARMA_PARTITION is not set -# CONFIG_EFI_PARTITION is not set -# CONFIG_SYSV68_PARTITION is not set -CONFIG_NLS=y -CONFIG_NLS_DEFAULT="iso8859-1" -CONFIG_NLS_CODEPAGE_437=y -# CONFIG_NLS_CODEPAGE_737 is not set -# CONFIG_NLS_CODEPAGE_775 is not set -# CONFIG_NLS_CODEPAGE_850 is not set -# CONFIG_NLS_CODEPAGE_852 is not set -# CONFIG_NLS_CODEPAGE_855 is not set -# CONFIG_NLS_CODEPAGE_857 is not set -# CONFIG_NLS_CODEPAGE_860 is not set -# CONFIG_NLS_CODEPAGE_861 is not set -# CONFIG_NLS_CODEPAGE_862 is not set -# CONFIG_NLS_CODEPAGE_863 is not set -# CONFIG_NLS_CODEPAGE_864 is not set -# CONFIG_NLS_CODEPAGE_865 is not set -# CONFIG_NLS_CODEPAGE_866 is not set -# CONFIG_NLS_CODEPAGE_869 is not set -# CONFIG_NLS_CODEPAGE_936 is not set -# CONFIG_NLS_CODEPAGE_950 is not set -# CONFIG_NLS_CODEPAGE_932 is not set -# CONFIG_NLS_CODEPAGE_949 is not set -# CONFIG_NLS_CODEPAGE_874 is not set -# CONFIG_NLS_ISO8859_8 is not set -# CONFIG_NLS_CODEPAGE_1250 is not set -# CONFIG_NLS_CODEPAGE_1251 is not set -CONFIG_NLS_ASCII=m -CONFIG_NLS_ISO8859_1=y -# CONFIG_NLS_ISO8859_2 is not set -# CONFIG_NLS_ISO8859_3 is not set -# CONFIG_NLS_ISO8859_4 is not set -# CONFIG_NLS_ISO8859_5 is not set -# CONFIG_NLS_ISO8859_6 is not set -# CONFIG_NLS_ISO8859_7 is not set -# CONFIG_NLS_ISO8859_9 is not set -# CONFIG_NLS_ISO8859_13 is not set -# CONFIG_NLS_ISO8859_14 is not set -# CONFIG_NLS_ISO8859_15 is not set -# CONFIG_NLS_KOI8_R is not set -# CONFIG_NLS_KOI8_U is not set -CONFIG_NLS_UTF8=m -# CONFIG_DLM is not set - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -CONFIG_ENABLE_WARN_DEPRECATED=y -CONFIG_ENABLE_MUST_CHECK=y -CONFIG_FRAME_WARN=1024 -# CONFIG_MAGIC_SYSRQ is not set -# CONFIG_UNUSED_SYMBOLS is not set -CONFIG_DEBUG_FS=y -# CONFIG_HEADERS_CHECK is not set -CONFIG_DEBUG_KERNEL=y -# CONFIG_DEBUG_SHIRQ is not set -CONFIG_DETECT_SOFTLOCKUP=y -# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set -CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 -CONFIG_DETECT_HUNG_TASK=y -# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set -CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 -CONFIG_SCHED_DEBUG=y -# CONFIG_SCHEDSTATS is not set -CONFIG_TIMER_STATS=y -# CONFIG_DEBUG_OBJECTS is not set -# CONFIG_SLUB_DEBUG_ON is not set -# CONFIG_SLUB_STATS is not set -CONFIG_DEBUG_PREEMPT=y -CONFIG_DEBUG_RT_MUTEXES=y -CONFIG_DEBUG_PI_LIST=y -# CONFIG_RT_MUTEX_TESTER is not set -# CONFIG_DEBUG_SPINLOCK is not set -CONFIG_DEBUG_MUTEXES=y -# CONFIG_DEBUG_LOCK_ALLOC is not set -# CONFIG_PROVE_LOCKING is not set -# CONFIG_LOCK_STAT is not set -# CONFIG_DEBUG_SPINLOCK_SLEEP is not set -# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set -# CONFIG_DEBUG_KOBJECT is not set -CONFIG_DEBUG_BUGVERBOSE=y -# CONFIG_DEBUG_INFO is not set -# CONFIG_DEBUG_VM is not set -# CONFIG_DEBUG_WRITECOUNT is not set -# CONFIG_DEBUG_MEMORY_INIT is not set -# CONFIG_DEBUG_LIST is not set -# CONFIG_DEBUG_SG is not set -# CONFIG_DEBUG_NOTIFIERS is not set -# CONFIG_BOOT_PRINTK_DELAY is not set -# CONFIG_RCU_TORTURE_TEST is not set -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -# CONFIG_BACKTRACE_SELF_TEST is not set -# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set -# CONFIG_FAULT_INJECTION is not set -# CONFIG_LATENCYTOP is not set -# CONFIG_SYSCTL_SYSCALL_CHECK is not set -# CONFIG_PAGE_POISONING is not set -CONFIG_HAVE_FUNCTION_TRACER=y -CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# -# CONFIG_FUNCTION_TRACER is not set -# CONFIG_IRQSOFF_TRACER is not set -# CONFIG_PREEMPT_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set -# CONFIG_STACK_TRACER is not set -# CONFIG_KMEMTRACE is not set -# CONFIG_WORKQUEUE_TRACER is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_DYNAMIC_DEBUG is not set -# CONFIG_SAMPLES is not set -CONFIG_HAVE_ARCH_KGDB=y -# CONFIG_KGDB is not set -CONFIG_ARM_UNWIND=y -CONFIG_DEBUG_USER=y -CONFIG_DEBUG_ERRORS=y -# CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_LL is not set - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set -# CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set -CONFIG_CRYPTO=y - -# -# Crypto core or helper -# -# CONFIG_CRYPTO_FIPS is not set -# CONFIG_CRYPTO_MANAGER is not set -# CONFIG_CRYPTO_MANAGER2 is not set -# CONFIG_CRYPTO_GF128MUL is not set -# CONFIG_CRYPTO_NULL is not set -# CONFIG_CRYPTO_CRYPTD is not set -# CONFIG_CRYPTO_AUTHENC is not set -# CONFIG_CRYPTO_TEST is not set - -# -# Authenticated Encryption with Associated Data -# -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_SEQIV is not set - -# -# Block modes -# -# CONFIG_CRYPTO_CBC is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_CTS is not set -# CONFIG_CRYPTO_ECB is not set -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_PCBC is not set -# CONFIG_CRYPTO_XTS is not set - -# -# Hash modes -# -# CONFIG_CRYPTO_HMAC is not set -# CONFIG_CRYPTO_XCBC is not set - -# -# Digest -# -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_MD4 is not set -# CONFIG_CRYPTO_MD5 is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_RMD128 is not set -# CONFIG_CRYPTO_RMD160 is not set -# CONFIG_CRYPTO_RMD256 is not set -# CONFIG_CRYPTO_RMD320 is not set -# CONFIG_CRYPTO_SHA1 is not set -# CONFIG_CRYPTO_SHA256 is not set -# CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_WP512 is not set - -# -# Ciphers -# -# CONFIG_CRYPTO_AES is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_ARC4 is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_CAST5 is not set -# CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_DES is not set -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_SALSA20 is not set -# CONFIG_CRYPTO_SEED is not set -# CONFIG_CRYPTO_SERPENT is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_TWOFISH is not set - -# -# Compression -# -# CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_ZLIB is not set -# CONFIG_CRYPTO_LZO is not set - -# -# Random Number Generation -# -# CONFIG_CRYPTO_ANSI_CPRNG is not set -# CONFIG_CRYPTO_HW is not set -# CONFIG_BINARY_PRINTF is not set - -# -# Library routines -# -CONFIG_BITREVERSE=y -CONFIG_GENERIC_FIND_LAST_BIT=y -CONFIG_CRC_CCITT=m -# CONFIG_CRC16 is not set -CONFIG_CRC_T10DIF=m -# CONFIG_CRC_ITU_T is not set -CONFIG_CRC32=y -# CONFIG_CRC7 is not set -# CONFIG_LIBCRC32C is not set -CONFIG_ZLIB_INFLATE=y -CONFIG_DECOMPRESS_GZIP=y -CONFIG_GENERIC_ALLOCATOR=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -CONFIG_HAS_DMA=y -CONFIG_NLATTR=y diff --git a/arch/arm/configs/da850_omapl138_defconfig b/arch/arm/configs/da8xx_omapl_defconfig index 842a70b079b..50bd25a10f0 100644 --- a/arch/arm/configs/da850_omapl138_defconfig +++ b/arch/arm/configs/da8xx_omapl_defconfig @@ -1,15 +1,13 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-davinci1 -# Mon Jun 29 07:54:15 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Oct 22 12:19:19 2009 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y CONFIG_GENERIC_GPIO=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_MMU=y -# CONFIG_NO_IOPORT is not set CONFIG_GENERIC_HARDIRQS=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -18,14 +16,14 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_HARDIRQS_SW_RESEND=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_HAS_CPUFREQ=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_ZONE_DMA=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_VECTORS_BASE=0xffff0000 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -48,11 +46,12 @@ CONFIG_POSIX_MQUEUE_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 @@ -62,8 +61,7 @@ CONFIG_FAIR_GROUP_SCHED=y CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set # CONFIG_CGROUPS is not set -CONFIG_SYSFS_DEPRECATED=y -CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y @@ -80,7 +78,6 @@ CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -93,6 +90,10 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y + +# +# Kernel Performance Events And Counters +# CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLUB_DEBUG=y CONFIG_COMPAT_BRK=y @@ -100,12 +101,16 @@ CONFIG_COMPAT_BRK=y CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_CLK=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set # CONFIG_SLOW_WORK is not set CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y @@ -118,7 +123,7 @@ CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y -# CONFIG_LBD is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -139,19 +144,22 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # # System Type # +CONFIG_MMU=y # CONFIG_ARCH_AAEC2000 is not set # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_REALVIEW is not set # CONFIG_ARCH_VERSATILE is not set # CONFIG_ARCH_AT91 is not set # CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_GEMINI is not set # CONFIG_ARCH_EBSA110 is not set # CONFIG_ARCH_EP93XX is not set -# CONFIG_ARCH_GEMINI is not set # CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_STMP3XXX is not set # CONFIG_ARCH_NETX is not set # CONFIG_ARCH_H720X is not set -# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_NOMADIK is not set # CONFIG_ARCH_IOP13XX is not set # CONFIG_ARCH_IOP32X is not set # CONFIG_ARCH_IOP33X is not set @@ -160,25 +168,27 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_ARCH_IXP4XX is not set # CONFIG_ARCH_L7200 is not set # CONFIG_ARCH_KIRKWOOD is not set -# CONFIG_ARCH_KS8695 is not set -# CONFIG_ARCH_NS9XXX is not set # CONFIG_ARCH_LOKI is not set # CONFIG_ARCH_MV78XX0 is not set -# CONFIG_ARCH_MXC is not set # CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_MMP is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_W90X900 is not set # CONFIG_ARCH_PNX4008 is not set # CONFIG_ARCH_PXA is not set -# CONFIG_ARCH_MMP is not set +# CONFIG_ARCH_MSM is not set # CONFIG_ARCH_RPC is not set # CONFIG_ARCH_SA1100 is not set # CONFIG_ARCH_S3C2410 is not set # CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_S5PC1XX is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_U300 is not set CONFIG_ARCH_DAVINCI=y # CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_MSM is not set -# CONFIG_ARCH_W90X900 is not set +# CONFIG_ARCH_BCMRING is not set CONFIG_CP_INTC=y # @@ -191,7 +201,7 @@ CONFIG_CP_INTC=y # CONFIG_ARCH_DAVINCI_DM644x is not set # CONFIG_ARCH_DAVINCI_DM355 is not set # CONFIG_ARCH_DAVINCI_DM646x is not set -# CONFIG_ARCH_DAVINCI_DA830 is not set +CONFIG_ARCH_DAVINCI_DA830=y CONFIG_ARCH_DAVINCI_DA850=y CONFIG_ARCH_DAVINCI_DA8XX=y # CONFIG_ARCH_DAVINCI_DM365 is not set @@ -199,7 +209,14 @@ CONFIG_ARCH_DAVINCI_DA8XX=y # # DaVinci Board Type # +CONFIG_MACH_DAVINCI_DA830_EVM=y +CONFIG_DA830_UI=y +CONFIG_DA830_UI_LCD=y +# CONFIG_DA830_UI_NAND is not set CONFIG_MACH_DAVINCI_DA850_EVM=y +CONFIG_DA850_UI_EXP=y +CONFIG_DA850_UI_NONE=y +# CONFIG_DA850_UI_RMII is not set CONFIG_DAVINCI_MUX=y # CONFIG_DAVINCI_MUX_DEBUG is not set # CONFIG_DAVINCI_MUX_WARNINGS is not set @@ -212,7 +229,7 @@ CONFIG_CPU_32=y CONFIG_CPU_ARM926T=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5TJ=y -CONFIG_CPU_PABRT_NOIFAR=y +CONFIG_CPU_PABRT_LEGACY=y CONFIG_CPU_CACHE_VIVT=y CONFIG_CPU_COPY_V4WB=y CONFIG_CPU_TLB_V4WBI=y @@ -225,9 +242,9 @@ CONFIG_CPU_CP15_MMU=y CONFIG_ARM_THUMB=y # CONFIG_CPU_ICACHE_DISABLE is not set # CONFIG_CPU_DCACHE_DISABLE is not set -# CONFIG_CPU_DCACHE_WRITETHROUGH is not set +CONFIG_CPU_DCACHE_WRITETHROUGH=y # CONFIG_CPU_CACHE_ROUND_ROBIN is not set -# CONFIG_OUTER_CACHE is not set +CONFIG_ARM_L1_CACHE_SHIFT=5 CONFIG_COMMON_CLKDEV=y # @@ -248,11 +265,12 @@ CONFIG_VMSPLIT_3G=y # CONFIG_VMSPLIT_2G is not set # CONFIG_VMSPLIT_1G is not set CONFIG_PAGE_OFFSET=0xC0000000 +# CONFIG_PREEMPT_NONE is not set +# CONFIG_PREEMPT_VOLUNTARY is not set CONFIG_PREEMPT=y CONFIG_HZ=100 CONFIG_AEABI=y # CONFIG_OABI_COMPAT is not set -# CONFIG_ARCH_HAS_HOLES_MEMORYMODEL is not set # CONFIG_ARCH_SPARSEMEM_DEFAULT is not set # CONFIG_ARCH_SELECT_MEMORY_MODEL is not set # CONFIG_HIGHMEM is not set @@ -268,12 +286,14 @@ CONFIG_SPLIT_PTLOCK_CPUS=4096 CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_LEDS=y # CONFIG_LEDS_CPU is not set CONFIG_ALIGNMENT_TRAP=y +# CONFIG_UACCESS_WITH_MEMCPY is not set # # Boot options @@ -287,7 +307,24 @@ CONFIG_CMDLINE="" # # CPU Power Management # -# CONFIG_CPU_IDLE is not set +CONFIG_CPU_FREQ=y +CONFIG_CPU_FREQ_TABLE=y +# CONFIG_CPU_FREQ_DEBUG is not set +CONFIG_CPU_FREQ_STAT=y +# CONFIG_CPU_FREQ_STAT_DETAILS is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set +CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y +# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set +CONFIG_CPU_FREQ_GOV_PERFORMANCE=m +CONFIG_CPU_FREQ_GOV_POWERSAVE=m +CONFIG_CPU_FREQ_GOV_USERSPACE=y +CONFIG_CPU_FREQ_GOV_ONDEMAND=m +# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set +CONFIG_CPU_IDLE=y +CONFIG_CPU_IDLE_GOV_LADDER=y +CONFIG_CPU_IDLE_GOV_MENU=y # # Floating point emulation @@ -401,6 +438,7 @@ CONFIG_NETFILTER_ADVANCED=y # CONFIG_IP6_NF_IPTABLES is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -415,6 +453,7 @@ CONFIG_NETFILTER_ADVANCED=y # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -440,6 +479,7 @@ CONFIG_NETFILTER_ADVANCED=y # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set @@ -460,6 +500,7 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_MG_DISK is not set CONFIG_MISC_DEVICES=y # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set @@ -471,6 +512,7 @@ CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_AT24=y # CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set # CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -494,10 +536,6 @@ CONFIG_BLK_DEV_SD=m # CONFIG_BLK_DEV_SR is not set # CONFIG_CHR_DEV_SG is not set # CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set @@ -522,7 +560,6 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_ATA is not set # CONFIG_MD is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -553,7 +590,7 @@ CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_AX88796 is not set # CONFIG_SMC91X is not set -# CONFIG_TI_DAVINCI_EMAC is not set +CONFIG_TI_DAVINCI_EMAC=y # CONFIG_DM9000 is not set # CONFIG_ETHOC is not set # CONFIG_SMC911X is not set @@ -567,12 +604,11 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -588,6 +624,7 @@ CONFIG_NETPOLL=y CONFIG_NETPOLL_TRAP=y CONFIG_NET_POLL_CONTROLLER=y # CONFIG_ISDN is not set +# CONFIG_PHONE is not set # # Input device support @@ -611,23 +648,30 @@ CONFIG_INPUT_EVBUG=m # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ADP5588 is not set CONFIG_KEYBOARD_ATKBD=m -# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_QT2160 is not set # CONFIG_KEYBOARD_LKKBD is not set -CONFIG_KEYBOARD_XTKBD=m +CONFIG_KEYBOARD_GPIO=y +# CONFIG_KEYBOARD_MATRIX is not set +# CONFIG_KEYBOARD_MAX7359 is not set # CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_OPENCORES is not set # CONFIG_KEYBOARD_STOWAWAY is not set -CONFIG_KEYBOARD_GPIO=y +# CONFIG_KEYBOARD_SUNKBD is not set +CONFIG_KEYBOARD_XTKBD=m # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set CONFIG_INPUT_TOUCHSCREEN=y # CONFIG_TOUCHSCREEN_AD7879_I2C is not set # CONFIG_TOUCHSCREEN_AD7879 is not set +# CONFIG_TOUCHSCREEN_EETI is not set # CONFIG_TOUCHSCREEN_FUJITSU is not set # CONFIG_TOUCHSCREEN_GUNZE is not set # CONFIG_TOUCHSCREEN_ELO is not set # CONFIG_TOUCHSCREEN_WACOM_W8001 is not set +# CONFIG_TOUCHSCREEN_MCS5000 is not set # CONFIG_TOUCHSCREEN_MTOUCH is not set # CONFIG_TOUCHSCREEN_INEXIO is not set # CONFIG_TOUCHSCREEN_MK712 is not set @@ -636,6 +680,7 @@ CONFIG_INPUT_TOUCHSCREEN=y # CONFIG_TOUCHSCREEN_TOUCHWIN is not set # CONFIG_TOUCHSCREEN_TOUCHIT213 is not set # CONFIG_TOUCHSCREEN_TSC2007 is not set +# CONFIG_TOUCHSCREEN_W90X900 is not set # CONFIG_INPUT_MISC is not set # @@ -684,6 +729,7 @@ CONFIG_HW_RANDOM=m # CONFIG_TCG_TPM is not set CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_HELPER_AUTO=y @@ -695,6 +741,7 @@ CONFIG_I2C_HELPER_AUTO=y # I2C system bus drivers (mostly embedded / system-on-chip) # CONFIG_I2C_DAVINCI=y +# CONFIG_I2C_DESIGNWARE is not set # CONFIG_I2C_GPIO is not set # CONFIG_I2C_OCORES is not set # CONFIG_I2C_SIMTEC is not set @@ -715,14 +762,17 @@ CONFIG_I2C_DAVINCI=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_REQUIRE_GPIOLIB=y CONFIG_GPIOLIB=y # CONFIG_DEBUG_GPIO is not set @@ -736,8 +786,8 @@ CONFIG_GPIOLIB=y # I2C GPIO expanders: # # CONFIG_GPIO_MAX732X is not set -# CONFIG_GPIO_PCA953X is not set -CONFIG_GPIO_PCF857X=m +CONFIG_GPIO_PCA953X=y +CONFIG_GPIO_PCF857X=y # # PCI GPIO expanders: @@ -746,11 +796,14 @@ CONFIG_GPIO_PCF857X=m # # SPI GPIO expanders: # + +# +# AC97 GPIO expanders: +# # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -782,31 +835,56 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TC6393XB is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set +# CONFIG_AB3100_CORE is not set +CONFIG_REGULATOR=y +# CONFIG_REGULATOR_DEBUG is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set +# CONFIG_REGULATOR_MAX1586 is not set +# CONFIG_REGULATOR_LP3971 is not set +# CONFIG_REGULATOR_TPS65023 is not set +CONFIG_REGULATOR_TPS6507X=y +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support # # CONFIG_VGASTATE is not set # CONFIG_VIDEO_OUTPUT_CONTROL is not set -# CONFIG_FB is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_DAVINCI is not set +# CONFIG_FB_VIRTUAL is not set +CONFIG_FB_DA8XX=y +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # @@ -819,6 +897,16 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_VGA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +CONFIG_LOGO=y +CONFIG_LOGO_LINUX_MONO=y +CONFIG_LOGO_LINUX_VGA16=y +CONFIG_LOGO_LINUX_CLUT224=y CONFIG_SOUND=m # CONFIG_SOUND_OSS_CORE is not set CONFIG_SND=m @@ -834,6 +922,11 @@ CONFIG_SND_SUPPORT_OLD_API=y CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set +# CONFIG_SND_RAWMIDI_SEQ is not set +# CONFIG_SND_OPL3_LIB_SEQ is not set +# CONFIG_SND_OPL4_LIB_SEQ is not set +# CONFIG_SND_SBAWE_SEQ is not set +# CONFIG_SND_EMU10K1_SEQ is not set CONFIG_SND_DRIVERS=y # CONFIG_SND_DUMMY is not set # CONFIG_SND_MTPAV is not set @@ -842,6 +935,8 @@ CONFIG_SND_DRIVERS=y CONFIG_SND_ARM=y CONFIG_SND_SOC=m CONFIG_SND_DAVINCI_SOC=m +# CONFIG_SND_DA830_SOC_EVM is not set +# CONFIG_SND_DA850_SOC_EVM is not set CONFIG_SND_SOC_I2C_AND_SPI=m # CONFIG_SND_SOC_ALL_CODECS is not set # CONFIG_SOUND_PRIME is not set @@ -849,14 +944,17 @@ CONFIG_SND_SOC_I2C_AND_SPI=m # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set -# CONFIG_ACCESSIBILITY is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set CONFIG_RTC_LIB=y # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set -# CONFIG_REGULATOR is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -877,14 +975,17 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y CONFIG_XFS_FS=m # CONFIG_XFS_QUOTA is not set # CONFIG_XFS_POSIX_ACL is not set # CONFIG_XFS_RT is not set # CONFIG_XFS_DEBUG is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -943,7 +1044,6 @@ CONFIG_MINIX_FS=m # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1039,6 +1139,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set @@ -1056,6 +1157,7 @@ CONFIG_TIMER_STATS=y # CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set CONFIG_DEBUG_PREEMPT=y CONFIG_DEBUG_RT_MUTEXES=y CONFIG_DEBUG_PI_LIST=y @@ -1076,29 +1178,29 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set # CONFIG_SYSCTL_SYSCALL_CHECK is not set # CONFIG_PAGE_POISONING is not set CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# +CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set # CONFIG_IRQSOFF_TRACER is not set # CONFIG_PREEMPT_TRACER is not set # CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_STACK_TRACER is not set # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set @@ -1125,7 +1227,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set # CONFIG_CRYPTO_MANAGER2 is not set # CONFIG_CRYPTO_GF128MUL is not set @@ -1157,11 +1258,13 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/arm/configs/davinci_all_defconfig b/arch/arm/configs/davinci_all_defconfig index ddffe39d9f8..bd656e8e6e4 100644 --- a/arch/arm/configs/davinci_all_defconfig +++ b/arch/arm/configs/davinci_all_defconfig @@ -1,14 +1,13 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc3-davinci1 -# Fri Jul 17 08:26:52 2009 +# Linux kernel version: 2.6.32-rc4 +# Mon Oct 12 14:13:12 2009 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y CONFIG_GENERIC_GPIO=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_MMU=y CONFIG_GENERIC_HARDIRQS=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -46,11 +45,12 @@ CONFIG_POSIX_MQUEUE_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 @@ -91,17 +91,15 @@ CONFIG_SHMEM=y CONFIG_AIO=y # -# Performance Counters +# Kernel Performance Events And Counters # CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLUB_DEBUG=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_KPROBES=y @@ -145,6 +143,7 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # # System Type # +CONFIG_MMU=y # CONFIG_ARCH_AAEC2000 is not set # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_REALVIEW is not set @@ -159,6 +158,7 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_ARCH_STMP3XXX is not set # CONFIG_ARCH_NETX is not set # CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_NOMADIK is not set # CONFIG_ARCH_IOP13XX is not set # CONFIG_ARCH_IOP32X is not set # CONFIG_ARCH_IOP33X is not set @@ -181,11 +181,13 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_ARCH_SA1100 is not set # CONFIG_ARCH_S3C2410 is not set # CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_S5PC1XX is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set # CONFIG_ARCH_U300 is not set CONFIG_ARCH_DAVINCI=y # CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_BCMRING is not set CONFIG_AINTC=y CONFIG_ARCH_DAVINCI_DMx=y @@ -208,6 +210,7 @@ CONFIG_ARCH_DAVINCI_DM365=y # CONFIG_MACH_DAVINCI_EVM=y CONFIG_MACH_SFFSDR=y +CONFIG_MACH_NEUROS_OSD2=y CONFIG_MACH_DAVINCI_DM355_EVM=y CONFIG_MACH_DM355_LEOPARD=y CONFIG_MACH_DAVINCI_DM6467_EVM=y @@ -224,7 +227,7 @@ CONFIG_CPU_32=y CONFIG_CPU_ARM926T=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5TJ=y -CONFIG_CPU_PABRT_NOIFAR=y +CONFIG_CPU_PABRT_LEGACY=y CONFIG_CPU_CACHE_VIVT=y CONFIG_CPU_COPY_V4WB=y CONFIG_CPU_TLB_V4WBI=y @@ -239,6 +242,7 @@ CONFIG_ARM_THUMB=y # CONFIG_CPU_DCACHE_DISABLE is not set # CONFIG_CPU_DCACHE_WRITETHROUGH is not set # CONFIG_CPU_CACHE_ROUND_ROBIN is not set +CONFIG_ARM_L1_CACHE_SHIFT=5 CONFIG_COMMON_CLKDEV=y # @@ -259,6 +263,8 @@ CONFIG_VMSPLIT_3G=y # CONFIG_VMSPLIT_2G is not set # CONFIG_VMSPLIT_1G is not set CONFIG_PAGE_OFFSET=0xC0000000 +# CONFIG_PREEMPT_NONE is not set +# CONFIG_PREEMPT_VOLUNTARY is not set CONFIG_PREEMPT=y CONFIG_HZ=100 CONFIG_AEABI=y @@ -280,6 +286,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_LEDS=y # CONFIG_LEDS_CPU is not set @@ -412,6 +419,7 @@ CONFIG_NETFILTER_ADVANCED=y # CONFIG_IP6_NF_IPTABLES is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -452,6 +460,7 @@ CONFIG_NETFILTER_ADVANCED=y # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set @@ -461,9 +470,9 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_CONNECTOR is not set CONFIG_MTD=m # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set # CONFIG_MTD_AFS_PARTS is not set # CONFIG_MTD_AR7_PARTS is not set @@ -499,7 +508,7 @@ CONFIG_MTD_CFI_I1=y CONFIG_MTD_CFI_I2=y # CONFIG_MTD_CFI_I4 is not set # CONFIG_MTD_CFI_I8 is not set -# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_INTELEXT=m CONFIG_MTD_CFI_AMDSTD=m # CONFIG_MTD_CFI_STAA is not set CONFIG_MTD_CFI_UTIL=m @@ -694,12 +703,10 @@ CONFIG_DM9000_DEBUGLEVEL=4 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -734,6 +741,7 @@ CONFIG_NETPOLL=y CONFIG_NETPOLL_TRAP=y CONFIG_NET_POLL_CONTROLLER=y # CONFIG_ISDN is not set +# CONFIG_PHONE is not set # # Input device support @@ -745,10 +753,7 @@ CONFIG_INPUT=y # # Userland interfaces # -CONFIG_INPUT_MOUSEDEV=m -CONFIG_INPUT_MOUSEDEV_PSAUX=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_MOUSEDEV is not set # CONFIG_INPUT_JOYDEV is not set CONFIG_INPUT_EVDEV=m CONFIG_INPUT_EVBUG=m @@ -757,12 +762,16 @@ CONFIG_INPUT_EVBUG=m # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ADP5588 is not set CONFIG_KEYBOARD_ATKBD=m +# CONFIG_QT2160 is not set # CONFIG_KEYBOARD_LKKBD is not set CONFIG_KEYBOARD_GPIO=y # CONFIG_KEYBOARD_MATRIX is not set # CONFIG_KEYBOARD_LM8323 is not set +# CONFIG_KEYBOARD_MAX7359 is not set # CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_OPENCORES is not set # CONFIG_KEYBOARD_STOWAWAY is not set # CONFIG_KEYBOARD_SUNKBD is not set CONFIG_KEYBOARD_XTKBD=m @@ -777,6 +786,7 @@ CONFIG_INPUT_TOUCHSCREEN=y # CONFIG_TOUCHSCREEN_GUNZE is not set # CONFIG_TOUCHSCREEN_ELO is not set # CONFIG_TOUCHSCREEN_WACOM_W8001 is not set +# CONFIG_TOUCHSCREEN_MCS5000 is not set # CONFIG_TOUCHSCREEN_MTOUCH is not set # CONFIG_TOUCHSCREEN_INEXIO is not set # CONFIG_TOUCHSCREEN_MK712 is not set @@ -787,7 +797,17 @@ CONFIG_INPUT_TOUCHSCREEN=y # CONFIG_TOUCHSCREEN_TOUCHIT213 is not set # CONFIG_TOUCHSCREEN_TSC2007 is not set # CONFIG_TOUCHSCREEN_W90X900 is not set -# CONFIG_INPUT_MISC is not set +CONFIG_INPUT_MISC=y +# CONFIG_INPUT_ATI_REMOTE is not set +# CONFIG_INPUT_ATI_REMOTE2 is not set +# CONFIG_INPUT_KEYSPAN_REMOTE is not set +# CONFIG_INPUT_POWERMATE is not set +# CONFIG_INPUT_YEALINK is not set +# CONFIG_INPUT_CM109 is not set +# CONFIG_INPUT_UINPUT is not set +# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set +CONFIG_INPUT_DM355EVM=m +CONFIG_INPUT_DM365EVM=m # # Hardware I/O ports @@ -828,13 +848,13 @@ CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set -CONFIG_HW_RANDOM=m -# CONFIG_HW_RANDOM_TIMERIOMEM is not set +# CONFIG_HW_RANDOM is not set # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_HELPER_AUTO=y @@ -868,13 +888,17 @@ CONFIG_I2C_DAVINCI=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_REQUIRE_GPIOLIB=y CONFIG_GPIOLIB=y # CONFIG_DEBUG_GPIO is not set @@ -889,7 +913,7 @@ CONFIG_GPIOLIB=y # # CONFIG_GPIO_MAX732X is not set # CONFIG_GPIO_PCA953X is not set -CONFIG_GPIO_PCF857X=m +CONFIG_GPIO_PCF857X=y # # PCI GPIO expanders: @@ -898,10 +922,19 @@ CONFIG_GPIO_PCF857X=m # # SPI GPIO expanders: # + +# +# AC97 GPIO expanders: +# # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# # CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set @@ -950,6 +983,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_TMP401 is not set +# CONFIG_SENSORS_TMP421 is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_W83781D is not set # CONFIG_SENSORS_W83791D is not set @@ -959,9 +993,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -988,7 +1020,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_MFD_ASIC3 is not set -# CONFIG_MFD_DM355EVM_MSP is not set +CONFIG_MFD_DM355EVM_MSP=y # CONFIG_HTC_EGPIO is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_TPS65010 is not set @@ -999,9 +1031,11 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TC6393XB is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set +# CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set # @@ -1013,9 +1047,9 @@ CONFIG_FB=y CONFIG_FIRMWARE_EDID=y # CONFIG_FB_DDC is not set # CONFIG_FB_BOOT_VESA_SUPPORT is not set -# CONFIG_FB_CFB_FILLRECT is not set -# CONFIG_FB_CFB_COPYAREA is not set -# CONFIG_FB_CFB_IMAGEBLIT is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set # CONFIG_FB_SYS_FILLRECT is not set # CONFIG_FB_SYS_COPYAREA is not set @@ -1032,6 +1066,7 @@ CONFIG_FIRMWARE_EDID=y # Frame buffer hardware drivers # # CONFIG_FB_S1D13XXX is not set +CONFIG_FB_DAVINCI=y # CONFIG_FB_VIRTUAL is not set # CONFIG_FB_METRONOME is not set # CONFIG_FB_MB862XX is not set @@ -1101,7 +1136,6 @@ CONFIG_SND_SOC_TLV320AIC3X=m # CONFIG_SOUND_PRIME is not set CONFIG_HID_SUPPORT=y CONFIG_HID=m -# CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # @@ -1130,6 +1164,7 @@ CONFIG_HID_CYPRESS=m CONFIG_HID_EZKEY=m # CONFIG_HID_KYE is not set CONFIG_HID_GYRATION=m +# CONFIG_HID_TWINHAN is not set # CONFIG_HID_KENSINGTON is not set CONFIG_HID_LOGITECH=m # CONFIG_LOGITECH_FF is not set @@ -1176,6 +1211,7 @@ CONFIG_USB_MON=m # CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set # CONFIG_USB_HWA_HCD is not set @@ -1269,6 +1305,7 @@ CONFIG_USB_GADGET_SELECTED=y # CONFIG_USB_GADGET_LH7A40X is not set # CONFIG_USB_GADGET_OMAP is not set # CONFIG_USB_GADGET_PXA25X is not set +# CONFIG_USB_GADGET_R8A66597 is not set # CONFIG_USB_GADGET_PXA27X is not set # CONFIG_USB_GADGET_S3C_HSOTG is not set # CONFIG_USB_GADGET_IMX is not set @@ -1286,6 +1323,7 @@ CONFIG_USB_ZERO=m # CONFIG_USB_AUDIO is not set CONFIG_USB_ETH=m CONFIG_USB_ETH_RNDIS=y +# CONFIG_USB_ETH_EEM is not set CONFIG_USB_GADGETFS=m CONFIG_USB_FILE_STORAGE=m # CONFIG_USB_FILE_STORAGE_TEST is not set @@ -1316,8 +1354,10 @@ CONFIG_MMC_BLOCK=m # MMC/SD/SDIO Host Controller Drivers # # CONFIG_MMC_SDHCI is not set +# CONFIG_MMC_AT91 is not set +# CONFIG_MMC_ATMELMCI is not set +CONFIG_MMC_DAVINCI=m # CONFIG_MEMSTICK is not set -# CONFIG_ACCESSIBILITY is not set CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=m @@ -1345,6 +1385,7 @@ CONFIG_LEDS_TRIGGER_HEARTBEAT=m # # iptables trigger is under Netfilter config (LED target) # +# CONFIG_ACCESSIBILITY is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=m @@ -1370,6 +1411,7 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_PCF8563 is not set # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_DM355EVM is not set # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set @@ -1399,8 +1441,11 @@ CONFIG_RTC_INTF_DEV=y # # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set -# CONFIG_REGULATOR is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -1429,6 +1474,7 @@ CONFIG_XFS_FS=m # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -1500,7 +1546,6 @@ CONFIG_MINIX_FS=m # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1596,6 +1641,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set @@ -1634,11 +1680,14 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set +CONFIG_FRAME_POINTER=y # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set # CONFIG_SYSCTL_SYSCALL_CHECK is not set @@ -1663,7 +1712,7 @@ CONFIG_BRANCH_PROFILE_NONE=y # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set -CONFIG_ARM_UNWIND=y +# CONFIG_ARM_UNWIND is not set CONFIG_DEBUG_USER=y CONFIG_DEBUG_ERRORS=y # CONFIG_DEBUG_STACK_USAGE is not set @@ -1681,7 +1730,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set # CONFIG_CRYPTO_MANAGER2 is not set # CONFIG_CRYPTO_GF128MUL is not set @@ -1713,11 +1761,13 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/arm/configs/omap_3430sdp_defconfig b/arch/arm/configs/omap_3430sdp_defconfig index 84829587d55..592457cfbbe 100644 --- a/arch/arm/configs/omap_3430sdp_defconfig +++ b/arch/arm/configs/omap_3430sdp_defconfig @@ -963,10 +963,32 @@ CONFIG_FB_CFB_IMAGEBLIT=y # # CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set -CONFIG_FB_OMAP=y -# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set +# CONFIG_FB_OMAP_LCD_VGA is not set # CONFIG_FB_OMAP_BOOTLOADER_INIT is not set -CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2 +CONFIG_OMAP2_VRAM=y +CONFIG_OMAP2_VRFB=y +CONFIG_OMAP2_DSS=y +CONFIG_OMAP2_VRAM_SIZE=4 +CONFIG_OMAP2_DSS_DEBUG_SUPPORT=y +# CONFIG_OMAP2_DSS_RFBI is not set +CONFIG_OMAP2_DSS_VENC=y +# CONFIG_OMAP2_DSS_SDI is not set +# CONFIG_OMAP2_DSS_DSI is not set +# CONFIG_OMAP2_DSS_FAKE_VSYNC is not set +CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=0 +CONFIG_FB_OMAP2=y +CONFIG_FB_OMAP2_DEBUG_SUPPORT=y +# CONFIG_FB_OMAP2_FORCE_AUTO_UPDATE is not set +CONFIG_FB_OMAP2_NUM_FBS=3 + +# +# OMAP2/3 Display Device Drivers +# +CONFIG_PANEL_GENERIC=y +CONFIG_PANEL_SHARP_LS037V7DW01=y # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # diff --git a/arch/arm/include/asm/mman.h b/arch/arm/include/asm/mman.h index 8eebf89f5ab..41f99c573b9 100644 --- a/arch/arm/include/asm/mman.h +++ b/arch/arm/include/asm/mman.h @@ -1 +1,4 @@ #include <asm-generic/mman.h> + +#define arch_mmap_check(addr, len, flags) \ + (((flags) & MAP_FIXED && (addr) < FIRST_USER_ADDRESS) ? -EINVAL : 0) diff --git a/arch/arm/kernel/calls.S b/arch/arm/kernel/calls.S index f58c1156e77..9314a2d681f 100644 --- a/arch/arm/kernel/calls.S +++ b/arch/arm/kernel/calls.S @@ -172,7 +172,7 @@ /* 160 */ CALL(sys_sched_get_priority_min) CALL(sys_sched_rr_get_interval) CALL(sys_nanosleep) - CALL(sys_arm_mremap) + CALL(sys_mremap) CALL(sys_setresuid16) /* 165 */ CALL(sys_getresuid16) CALL(sys_ni_syscall) /* vm86 */ diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S index f0fe95b7085..2c1db77d784 100644 --- a/arch/arm/kernel/entry-common.S +++ b/arch/arm/kernel/entry-common.S @@ -416,12 +416,12 @@ sys_mmap2: tst r5, #PGOFF_MASK moveq r5, r5, lsr #PAGE_SHIFT - 12 streq r5, [sp, #4] - beq do_mmap2 + beq sys_mmap_pgoff mov r0, #-EINVAL mov pc, lr #else str r5, [sp, #4] - b do_mmap2 + b sys_mmap_pgoff #endif ENDPROC(sys_mmap2) diff --git a/arch/arm/kernel/sys_arm.c b/arch/arm/kernel/sys_arm.c index 78ecaac6520..ae4027bd01b 100644 --- a/arch/arm/kernel/sys_arm.c +++ b/arch/arm/kernel/sys_arm.c @@ -28,41 +28,6 @@ #include <linux/ipc.h> #include <linux/uaccess.h> -extern unsigned long do_mremap(unsigned long addr, unsigned long old_len, - unsigned long new_len, unsigned long flags, - unsigned long new_addr); - -/* common code for old and new mmaps */ -inline long do_mmap2( - unsigned long addr, unsigned long len, - unsigned long prot, unsigned long flags, - unsigned long fd, unsigned long pgoff) -{ - int error = -EINVAL; - struct file * file = NULL; - - flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE); - - if (flags & MAP_FIXED && addr < FIRST_USER_ADDRESS) - goto out; - - error = -EBADF; - if (!(flags & MAP_ANONYMOUS)) { - file = fget(fd); - if (!file) - goto out; - } - - down_write(¤t->mm->mmap_sem); - error = do_mmap_pgoff(file, addr, len, prot, flags, pgoff); - up_write(¤t->mm->mmap_sem); - - if (file) - fput(file); -out: - return error; -} - struct mmap_arg_struct { unsigned long addr; unsigned long len; @@ -84,29 +49,11 @@ asmlinkage int old_mmap(struct mmap_arg_struct __user *arg) if (a.offset & ~PAGE_MASK) goto out; - error = do_mmap2(a.addr, a.len, a.prot, a.flags, a.fd, a.offset >> PAGE_SHIFT); + error = sys_mmap_pgoff(a.addr, a.len, a.prot, a.flags, a.fd, a.offset >> PAGE_SHIFT); out: return error; } -asmlinkage unsigned long -sys_arm_mremap(unsigned long addr, unsigned long old_len, - unsigned long new_len, unsigned long flags, - unsigned long new_addr) -{ - unsigned long ret = -EINVAL; - - if (flags & MREMAP_FIXED && new_addr < FIRST_USER_ADDRESS) - goto out; - - down_write(¤t->mm->mmap_sem); - ret = do_mremap(addr, old_len, new_len, flags, new_addr); - up_write(¤t->mm->mmap_sem); - -out: - return ret; -} - /* * Perform the select(nd, in, out, ex, tv) and mmap() system * calls. diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c index a57af3e99c7..809114d5a5a 100644 --- a/arch/arm/mach-at91/at91sam9g45_devices.c +++ b/arch/arm/mach-at91/at91sam9g45_devices.c @@ -866,6 +866,57 @@ static void __init at91_add_device_rtc(void) {} /* -------------------------------------------------------------------- + * Touchscreen + * -------------------------------------------------------------------- */ + +#if defined(CONFIG_TOUCHSCREEN_ATMEL_TSADCC) || defined(CONFIG_TOUCHSCREEN_ATMEL_TSADCC_MODULE) +static u64 tsadcc_dmamask = DMA_BIT_MASK(32); +static struct at91_tsadcc_data tsadcc_data; + +static struct resource tsadcc_resources[] = { + [0] = { + .start = AT91SAM9G45_BASE_TSC, + .end = AT91SAM9G45_BASE_TSC + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91SAM9G45_ID_TSC, + .end = AT91SAM9G45_ID_TSC, + .flags = IORESOURCE_IRQ, + } +}; + +static struct platform_device at91sam9g45_tsadcc_device = { + .name = "atmel_tsadcc", + .id = -1, + .dev = { + .dma_mask = &tsadcc_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &tsadcc_data, + }, + .resource = tsadcc_resources, + .num_resources = ARRAY_SIZE(tsadcc_resources), +}; + +void __init at91_add_device_tsadcc(struct at91_tsadcc_data *data) +{ + if (!data) + return; + + at91_set_gpio_input(AT91_PIN_PD20, 0); /* AD0_XR */ + at91_set_gpio_input(AT91_PIN_PD21, 0); /* AD1_XL */ + at91_set_gpio_input(AT91_PIN_PD22, 0); /* AD2_YT */ + at91_set_gpio_input(AT91_PIN_PD23, 0); /* AD3_TB */ + + tsadcc_data = *data; + platform_device_register(&at91sam9g45_tsadcc_device); +} +#else +void __init at91_add_device_tsadcc(struct at91_tsadcc_data *data) {} +#endif + + +/* -------------------------------------------------------------------- * RTT * -------------------------------------------------------------------- */ diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c index d345f5453db..53aaa94df75 100644 --- a/arch/arm/mach-at91/at91sam9rl_devices.c +++ b/arch/arm/mach-at91/at91sam9rl_devices.c @@ -622,6 +622,7 @@ static void __init at91_add_device_tc(void) { } #if defined(CONFIG_TOUCHSCREEN_ATMEL_TSADCC) || defined(CONFIG_TOUCHSCREEN_ATMEL_TSADCC_MODULE) static u64 tsadcc_dmamask = DMA_BIT_MASK(32); +static struct at91_tsadcc_data tsadcc_data; static struct resource tsadcc_resources[] = { [0] = { @@ -642,22 +643,27 @@ static struct platform_device at91sam9rl_tsadcc_device = { .dev = { .dma_mask = &tsadcc_dmamask, .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &tsadcc_data, }, .resource = tsadcc_resources, .num_resources = ARRAY_SIZE(tsadcc_resources), }; -void __init at91_add_device_tsadcc(void) +void __init at91_add_device_tsadcc(struct at91_tsadcc_data *data) { + if (!data) + return; + at91_set_A_periph(AT91_PIN_PA17, 0); /* AD0_XR */ at91_set_A_periph(AT91_PIN_PA18, 0); /* AD1_XL */ at91_set_A_periph(AT91_PIN_PA19, 0); /* AD2_YT */ at91_set_A_periph(AT91_PIN_PA20, 0); /* AD3_TB */ + tsadcc_data = *data; platform_device_register(&at91sam9rl_tsadcc_device); } #else -void __init at91_add_device_tsadcc(void) {} +void __init at91_add_device_tsadcc(struct at91_tsadcc_data *data) {} #endif diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c index 1cf4d868107..98f9f4bc939 100644 --- a/arch/arm/mach-at91/board-sam9m10g45ek.c +++ b/arch/arm/mach-at91/board-sam9m10g45ek.c @@ -229,6 +229,16 @@ static struct atmel_lcdfb_info __initdata ek_lcdc_data; /* + * Touchscreen + */ +static struct at91_tsadcc_data ek_tsadcc_data = { + .adc_clock = 300000, + .pendet_debounce = 0x0d, + .ts_sample_hold_time = 0x0a, +}; + + +/* * GPIO Buttons */ #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) @@ -379,6 +389,8 @@ static void __init ek_board_init(void) at91_add_device_i2c(0, NULL, 0); /* LCD Controller */ at91_add_device_lcdc(&ek_lcdc_data); + /* Touch Screen */ + at91_add_device_tsadcc(&ek_tsadcc_data); /* Push Buttons */ ek_add_device_buttons(); /* AC97 */ diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c index bd28e989e54..7ac20f3a206 100644 --- a/arch/arm/mach-at91/board-sam9rlek.c +++ b/arch/arm/mach-at91/board-sam9rlek.c @@ -243,6 +243,16 @@ static struct gpio_led ek_leds[] = { /* + * Touchscreen + */ +static struct at91_tsadcc_data ek_tsadcc_data = { + .adc_clock = 1000000, + .pendet_debounce = 0x0f, + .ts_sample_hold_time = 0x03, +}; + + +/* * GPIO Buttons */ #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) @@ -310,7 +320,7 @@ static void __init ek_board_init(void) /* AC97 */ at91_add_device_ac97(&ek_ac97_data); /* Touch Screen Controller */ - at91_add_device_tsadcc(); + at91_add_device_tsadcc(&ek_tsadcc_data); /* LEDs */ at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds)); /* Push Buttons */ diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h index 2295d80dd89..bb6f6a7ba5e 100644 --- a/arch/arm/mach-at91/include/mach/board.h +++ b/arch/arm/mach-at91/include/mach/board.h @@ -187,7 +187,12 @@ extern void __init at91_add_device_ac97(struct ac97c_platform_data *data); extern void __init at91_add_device_isi(void); /* Touchscreen Controller */ -extern void __init at91_add_device_tsadcc(void); +struct at91_tsadcc_data { + unsigned int adc_clock; + u8 pendet_debounce; + u8 ts_sample_hold_time; +}; +extern void __init at91_add_device_tsadcc(struct at91_tsadcc_data *data); /* CAN */ struct at91_can_data { diff --git a/arch/arm/mach-bcmring/include/csp/reg.h b/arch/arm/mach-bcmring/include/csp/reg.h index e5f60bf5a1f..56654d23c3d 100644 --- a/arch/arm/mach-bcmring/include/csp/reg.h +++ b/arch/arm/mach-bcmring/include/csp/reg.h @@ -16,7 +16,7 @@ /** * @file reg.h * -* @brief Generic register defintions used in CSP +* @brief Generic register definitions used in CSP */ /****************************************************************************/ diff --git a/arch/arm/mach-bcmring/include/mach/csp/dmacHw_priv.h b/arch/arm/mach-bcmring/include/mach/csp/dmacHw_priv.h index 375066ad018..cbf334d1c76 100644 --- a/arch/arm/mach-bcmring/include/mach/csp/dmacHw_priv.h +++ b/arch/arm/mach-bcmring/include/mach/csp/dmacHw_priv.h @@ -83,7 +83,7 @@ typedef struct { * @brief Get next available transaction width * * -* @return On sucess : Next avail able transaction width +* @return On success : Next available transaction width * On failure : dmacHw_TRANSACTION_WIDTH_8 * * @note diff --git a/arch/arm/mach-bcmring/include/mach/csp/mm_addr.h b/arch/arm/mach-bcmring/include/mach/csp/mm_addr.h index 86bb58d4f58..ad58cf87337 100644 --- a/arch/arm/mach-bcmring/include/mach/csp/mm_addr.h +++ b/arch/arm/mach-bcmring/include/mach/csp/mm_addr.h @@ -16,7 +16,7 @@ /** * @file mm_addr.h * -* @brief Memory Map address defintions +* @brief Memory Map address definitions * * @note * None diff --git a/arch/arm/mach-bcmring/include/mach/dma.h b/arch/arm/mach-bcmring/include/mach/dma.h index 847980c85c8..1f2c5319c05 100644 --- a/arch/arm/mach-bcmring/include/mach/dma.h +++ b/arch/arm/mach-bcmring/include/mach/dma.h @@ -651,7 +651,7 @@ int dma_map_add_region(DMA_MemMap_t *memMap, /* Stores state information about t /** * Creates a descriptor ring from a memory mapping. * -* @return 0 on sucess, error code otherwise. +* @return 0 on success, error code otherwise. */ /****************************************************************************/ diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig index 40866c643f1..033bfede6b6 100644 --- a/arch/arm/mach-davinci/Kconfig +++ b/arch/arm/mach-davinci/Kconfig @@ -32,11 +32,13 @@ config ARCH_DAVINCI_DA830 bool "DA830/OMAP-L137 based system" select CP_INTC select ARCH_DAVINCI_DA8XX + select CPU_DCACHE_WRITETHROUGH # needed on silicon revs 1.0, 1.1 config ARCH_DAVINCI_DA850 bool "DA850/OMAP-L138 based system" select CP_INTC select ARCH_DAVINCI_DA8XX + select ARCH_HAS_CPUFREQ config ARCH_DAVINCI_DA8XX bool @@ -63,6 +65,13 @@ config MACH_SFFSDR Say Y here to select the Lyrtech Small Form Factor Software Defined Radio (SFFSDR) board. +config MACH_NEUROS_OSD2 + bool "Neuros OSD2 Open Television Set Top Box" + depends on ARCH_DAVINCI_DM644x + help + Configure this option to specify the whether the board used + for development is a Neuros OSD2 Open Set Top Box. + config MACH_DAVINCI_DM355_EVM bool "TI DM355 EVM" default ARCH_DAVINCI_DM355 @@ -98,16 +107,66 @@ config MACH_DAVINCI_DA830_EVM bool "TI DA830/OMAP-L137 Reference Platform" default ARCH_DAVINCI_DA830 depends on ARCH_DAVINCI_DA830 + select GPIO_PCF857X help Say Y here to select the TI DA830/OMAP-L137 Evaluation Module. +choice + prompt "Select DA830/OMAP-L137 UI board peripheral" + depends on MACH_DAVINCI_DA830_EVM + help + The presence of UI card on the DA830/OMAP-L137 EVM is detected + automatically based on successful probe of the I2C based GPIO + expander on that board. This option selected in this menu has + an effect only in case of a successful UI card detection. + +config DA830_UI_LCD + bool "LCD" + help + Say Y here to use the LCD as a framebuffer or simple character + display. + +config DA830_UI_NAND + bool "NAND flash" + help + Say Y here to use the NAND flash. Do not forget to setup + the switch correctly. +endchoice + config MACH_DAVINCI_DA850_EVM bool "TI DA850/OMAP-L138 Reference Platform" default ARCH_DAVINCI_DA850 depends on ARCH_DAVINCI_DA850 + select GPIO_PCA953X help Say Y here to select the TI DA850/OMAP-L138 Evaluation Module. +choice + prompt "Select peripherals connected to expander on UI board" + depends on MACH_DAVINCI_DA850_EVM + help + The presence of User Interface (UI) card on the DA850/OMAP-L138 + EVM is detected automatically based on successful probe of the I2C + based GPIO expander on that card. This option selected in this + menu has an effect only in case of a successful UI card detection. + +config DA850_UI_NONE + bool "No peripheral is enabled" + help + Say Y if you do not want to enable any of the peripherals connected + to TCA6416 expander on DA850/OMAP-L138 EVM UI card + +config DA850_UI_RMII + bool "RMII Ethernet PHY" + help + Say Y if you want to use the RMII PHY on the DA850/OMAP-L138 EVM. + This PHY is found on the UI daughter card that is supplied with + the EVM. + NOTE: Please take care while choosing this option, MII PHY will + not be functional if RMII mode is selected. + +endchoice + config DAVINCI_MUX bool "DAVINCI multiplexing support" depends on ARCH_DAVINCI diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile index 2e11e847313..eeb9230d884 100644 --- a/arch/arm/mach-davinci/Makefile +++ b/arch/arm/mach-davinci/Makefile @@ -23,9 +23,14 @@ obj-$(CONFIG_CP_INTC) += cp_intc.o # Board specific obj-$(CONFIG_MACH_DAVINCI_EVM) += board-dm644x-evm.o obj-$(CONFIG_MACH_SFFSDR) += board-sffsdr.o +obj-$(CONFIG_MACH_NEUROS_OSD2) += board-neuros-osd2.o obj-$(CONFIG_MACH_DAVINCI_DM355_EVM) += board-dm355-evm.o obj-$(CONFIG_MACH_DM355_LEOPARD) += board-dm355-leopard.o obj-$(CONFIG_MACH_DAVINCI_DM6467_EVM) += board-dm646x-evm.o obj-$(CONFIG_MACH_DAVINCI_DM365_EVM) += board-dm365-evm.o obj-$(CONFIG_MACH_DAVINCI_DA830_EVM) += board-da830-evm.o obj-$(CONFIG_MACH_DAVINCI_DA850_EVM) += board-da850-evm.o + +# Power Management +obj-$(CONFIG_CPU_FREQ) += cpufreq.o +obj-$(CONFIG_CPU_IDLE) += cpuidle.o diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c index bfbb63936f3..31dc9901e55 100644 --- a/arch/arm/mach-davinci/board-da830-evm.c +++ b/arch/arm/mach-davinci/board-da830-evm.c @@ -10,51 +10,194 @@ * or implied. */ #include <linux/kernel.h> -#include <linux/module.h> #include <linux/init.h> #include <linux/console.h> +#include <linux/interrupt.h> +#include <linux/gpio.h> +#include <linux/platform_device.h> #include <linux/i2c.h> +#include <linux/i2c/pcf857x.h> #include <linux/i2c/at24.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <mach/common.h> -#include <mach/irqs.h> #include <mach/cp_intc.h> +#include <mach/mux.h> +#include <mach/nand.h> #include <mach/da8xx.h> -#include <mach/asp.h> +#include <mach/usb.h> #define DA830_EVM_PHY_MASK 0x0 #define DA830_EVM_MDIO_FREQUENCY 2200000 /* PHY bus frequency */ -static struct at24_platform_data da830_evm_i2c_eeprom_info = { - .byte_len = SZ_256K / 8, - .page_size = 64, - .flags = AT24_FLAG_ADDR16, - .setup = davinci_get_mac_addr, - .context = (void *)0x7f00, -}; +#define DA830_EMIF25_ASYNC_DATA_CE3_BASE 0x62000000 +#define DA830_EMIF25_CONTROL_BASE 0x68000000 -static struct i2c_board_info __initdata da830_evm_i2c_devices[] = { - { - I2C_BOARD_INFO("24c256", 0x50), - .platform_data = &da830_evm_i2c_eeprom_info, - }, - { - I2C_BOARD_INFO("tlv320aic3x", 0x18), - } +/* + * USB1 VBUS is controlled by GPIO1[15], over-current is reported on GPIO2[4]. + */ +#define ON_BD_USB_DRV GPIO_TO_PIN(1, 15) +#define ON_BD_USB_OVC GPIO_TO_PIN(2, 4) + +static const short da830_evm_usb11_pins[] = { + DA830_GPIO1_15, DA830_GPIO2_4, + -1 }; -static struct davinci_i2c_platform_data da830_evm_i2c_0_pdata = { - .bus_freq = 100, /* kHz */ - .bus_delay = 0, /* usec */ +static da8xx_ocic_handler_t da830_evm_usb_ocic_handler; + +static int da830_evm_usb_set_power(unsigned port, int on) +{ + gpio_set_value(ON_BD_USB_DRV, on); + return 0; +} + +static int da830_evm_usb_get_power(unsigned port) +{ + return gpio_get_value(ON_BD_USB_DRV); +} + +static int da830_evm_usb_get_oci(unsigned port) +{ + return !gpio_get_value(ON_BD_USB_OVC); +} + +static irqreturn_t da830_evm_usb_ocic_irq(int, void *); + +static int da830_evm_usb_ocic_notify(da8xx_ocic_handler_t handler) +{ + int irq = gpio_to_irq(ON_BD_USB_OVC); + int error = 0; + + if (handler != NULL) { + da830_evm_usb_ocic_handler = handler; + + error = request_irq(irq, da830_evm_usb_ocic_irq, IRQF_DISABLED | + IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, + "OHCI over-current indicator", NULL); + if (error) + printk(KERN_ERR "%s: could not request IRQ to watch " + "over-current indicator changes\n", __func__); + } else + free_irq(irq, NULL); + + return error; +} + +static struct da8xx_ohci_root_hub da830_evm_usb11_pdata = { + .set_power = da830_evm_usb_set_power, + .get_power = da830_evm_usb_get_power, + .get_oci = da830_evm_usb_get_oci, + .ocic_notify = da830_evm_usb_ocic_notify, + + /* TPS2065 switch @ 5V */ + .potpgt = (3 + 1) / 2, /* 3 ms max */ }; +static irqreturn_t da830_evm_usb_ocic_irq(int irq, void *dev_id) +{ + da830_evm_usb_ocic_handler(&da830_evm_usb11_pdata, 1); + return IRQ_HANDLED; +} + +static __init void da830_evm_usb_init(void) +{ + u32 cfgchip2; + int ret; + + /* + * Set up USB clock/mode in the CFGCHIP2 register. + * FYI: CFGCHIP2 is 0x0000ef00 initially. + */ + cfgchip2 = __raw_readl(DA8XX_SYSCFG_VIRT(DA8XX_CFGCHIP2_REG)); + + /* USB2.0 PHY reference clock is 24 MHz */ + cfgchip2 &= ~CFGCHIP2_REFFREQ; + cfgchip2 |= CFGCHIP2_REFFREQ_24MHZ; + + /* + * Select internal reference clock for USB 2.0 PHY + * and use it as a clock source for USB 1.1 PHY + * (this is the default setting anyway). + */ + cfgchip2 &= ~CFGCHIP2_USB1PHYCLKMUX; + cfgchip2 |= CFGCHIP2_USB2PHYCLKMUX; + + /* + * We have to override VBUS/ID signals when MUSB is configured into the + * host-only mode -- ID pin will float if no cable is connected, so the + * controller won't be able to drive VBUS thinking that it's a B-device. + * Otherwise, we want to use the OTG mode and enable VBUS comparators. + */ + cfgchip2 &= ~CFGCHIP2_OTGMODE; +#ifdef CONFIG_USB_MUSB_HOST + cfgchip2 |= CFGCHIP2_FORCE_HOST; +#else + cfgchip2 |= CFGCHIP2_SESENDEN | CFGCHIP2_VBDTCTEN; +#endif + + __raw_writel(cfgchip2, DA8XX_SYSCFG_VIRT(DA8XX_CFGCHIP2_REG)); + + /* USB_REFCLKIN is not used. */ + ret = davinci_cfg_reg(DA830_USB0_DRVVBUS); + if (ret) + pr_warning("%s: USB 2.0 PinMux setup failed: %d\n", + __func__, ret); + else { + /* + * TPS2065 switch @ 5V supplies 1 A (sustains 1.5 A), + * with the power on to power good time of 3 ms. + */ + ret = da8xx_register_usb20(1000, 3); + if (ret) + pr_warning("%s: USB 2.0 registration failed: %d\n", + __func__, ret); + } + + ret = da8xx_pinmux_setup(da830_evm_usb11_pins); + if (ret) { + pr_warning("%s: USB 1.1 PinMux setup failed: %d\n", + __func__, ret); + return; + } + + ret = gpio_request(ON_BD_USB_DRV, "ON_BD_USB_DRV"); + if (ret) { + printk(KERN_ERR "%s: failed to request GPIO for USB 1.1 port " + "power control: %d\n", __func__, ret); + return; + } + gpio_direction_output(ON_BD_USB_DRV, 0); + + ret = gpio_request(ON_BD_USB_OVC, "ON_BD_USB_OVC"); + if (ret) { + printk(KERN_ERR "%s: failed to request GPIO for USB 1.1 port " + "over-current indicator: %d\n", __func__, ret); + return; + } + gpio_direction_input(ON_BD_USB_OVC); + + ret = da8xx_register_usb11(&da830_evm_usb11_pdata); + if (ret) + pr_warning("%s: USB 1.1 registration failed: %d\n", + __func__, ret); +} + static struct davinci_uart_config da830_evm_uart_config __initdata = { .enabled_uarts = 0x7, }; +static const short da830_evm_mcasp1_pins[] = { + DA830_AHCLKX1, DA830_ACLKX1, DA830_AFSX1, DA830_AHCLKR1, DA830_AFSR1, + DA830_AMUTE1, DA830_AXR1_0, DA830_AXR1_1, DA830_AXR1_2, DA830_AXR1_5, + DA830_ACLKR1, DA830_AXR1_6, DA830_AXR1_7, DA830_AXR1_8, DA830_AXR1_10, + DA830_AXR1_11, + -1 +}; + static u8 da830_iis_serializer_direction[] = { RX_MODE, INACTIVE_MODE, INACTIVE_MODE, INACTIVE_MODE, INACTIVE_MODE, TX_MODE, INACTIVE_MODE, INACTIVE_MODE, @@ -74,6 +217,271 @@ static struct snd_platform_data da830_evm_snd_data = { .rxnumevt = 1, }; +/* + * GPIO2[1] is used as MMC_SD_WP and GPIO2[2] as MMC_SD_INS. + */ +static const short da830_evm_mmc_sd_pins[] = { + DA830_MMCSD_DAT_0, DA830_MMCSD_DAT_1, DA830_MMCSD_DAT_2, + DA830_MMCSD_DAT_3, DA830_MMCSD_DAT_4, DA830_MMCSD_DAT_5, + DA830_MMCSD_DAT_6, DA830_MMCSD_DAT_7, DA830_MMCSD_CLK, + DA830_MMCSD_CMD, DA830_GPIO2_1, DA830_GPIO2_2, + -1 +}; + +#define DA830_MMCSD_WP_PIN GPIO_TO_PIN(2, 1) + +static int da830_evm_mmc_get_ro(int index) +{ + return gpio_get_value(DA830_MMCSD_WP_PIN); +} + +static struct davinci_mmc_config da830_evm_mmc_config = { + .get_ro = da830_evm_mmc_get_ro, + .wires = 4, + .max_freq = 50000000, + .caps = MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED, + .version = MMC_CTLR_VERSION_2, +}; + +static inline void da830_evm_init_mmc(void) +{ + int ret; + + ret = da8xx_pinmux_setup(da830_evm_mmc_sd_pins); + if (ret) { + pr_warning("da830_evm_init: mmc/sd mux setup failed: %d\n", + ret); + return; + } + + ret = gpio_request(DA830_MMCSD_WP_PIN, "MMC WP"); + if (ret) { + pr_warning("da830_evm_init: can not open GPIO %d\n", + DA830_MMCSD_WP_PIN); + return; + } + gpio_direction_input(DA830_MMCSD_WP_PIN); + + ret = da8xx_register_mmcsd0(&da830_evm_mmc_config); + if (ret) { + pr_warning("da830_evm_init: mmc/sd registration failed: %d\n", + ret); + gpio_free(DA830_MMCSD_WP_PIN); + } +} + +/* + * UI board NAND/NOR flashes only use 8-bit data bus. + */ +static const short da830_evm_emif25_pins[] = { + DA830_EMA_D_0, DA830_EMA_D_1, DA830_EMA_D_2, DA830_EMA_D_3, + DA830_EMA_D_4, DA830_EMA_D_5, DA830_EMA_D_6, DA830_EMA_D_7, + DA830_EMA_A_0, DA830_EMA_A_1, DA830_EMA_A_2, DA830_EMA_A_3, + DA830_EMA_A_4, DA830_EMA_A_5, DA830_EMA_A_6, DA830_EMA_A_7, + DA830_EMA_A_8, DA830_EMA_A_9, DA830_EMA_A_10, DA830_EMA_A_11, + DA830_EMA_A_12, DA830_EMA_BA_0, DA830_EMA_BA_1, DA830_NEMA_WE, + DA830_NEMA_CS_2, DA830_NEMA_CS_3, DA830_NEMA_OE, DA830_EMA_WAIT_0, + -1 +}; + +#if defined(CONFIG_MMC_DAVINCI) || defined(CONFIG_MMC_DAVINCI_MODULE) +#define HAS_MMC 1 +#else +#define HAS_MMC 0 +#endif + +#ifdef CONFIG_DA830_UI_NAND +static struct mtd_partition da830_evm_nand_partitions[] = { + /* bootloader (U-Boot, etc) in first sector */ + [0] = { + .name = "bootloader", + .offset = 0, + .size = SZ_128K, + .mask_flags = MTD_WRITEABLE, /* force read-only */ + }, + /* bootloader params in the next sector */ + [1] = { + .name = "params", + .offset = MTDPART_OFS_APPEND, + .size = SZ_128K, + .mask_flags = MTD_WRITEABLE, /* force read-only */ + }, + /* kernel */ + [2] = { + .name = "kernel", + .offset = MTDPART_OFS_APPEND, + .size = SZ_2M, + .mask_flags = 0, + }, + /* file system */ + [3] = { + .name = "filesystem", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + .mask_flags = 0, + } +}; + +/* flash bbt decriptors */ +static uint8_t da830_evm_nand_bbt_pattern[] = { 'B', 'b', 't', '0' }; +static uint8_t da830_evm_nand_mirror_pattern[] = { '1', 't', 'b', 'B' }; + +static struct nand_bbt_descr da830_evm_nand_bbt_main_descr = { + .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | + NAND_BBT_WRITE | NAND_BBT_2BIT | + NAND_BBT_VERSION | NAND_BBT_PERCHIP, + .offs = 2, + .len = 4, + .veroffs = 16, + .maxblocks = 4, + .pattern = da830_evm_nand_bbt_pattern +}; + +static struct nand_bbt_descr da830_evm_nand_bbt_mirror_descr = { + .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | + NAND_BBT_WRITE | NAND_BBT_2BIT | + NAND_BBT_VERSION | NAND_BBT_PERCHIP, + .offs = 2, + .len = 4, + .veroffs = 16, + .maxblocks = 4, + .pattern = da830_evm_nand_mirror_pattern +}; + +static struct davinci_nand_pdata da830_evm_nand_pdata = { + .parts = da830_evm_nand_partitions, + .nr_parts = ARRAY_SIZE(da830_evm_nand_partitions), + .ecc_mode = NAND_ECC_HW, + .ecc_bits = 4, + .options = NAND_USE_FLASH_BBT, + .bbt_td = &da830_evm_nand_bbt_main_descr, + .bbt_md = &da830_evm_nand_bbt_mirror_descr, +}; + +static struct resource da830_evm_nand_resources[] = { + [0] = { /* First memory resource is NAND I/O window */ + .start = DA830_EMIF25_ASYNC_DATA_CE3_BASE, + .end = DA830_EMIF25_ASYNC_DATA_CE3_BASE + PAGE_SIZE - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { /* Second memory resource is AEMIF control registers */ + .start = DA830_EMIF25_CONTROL_BASE, + .end = DA830_EMIF25_CONTROL_BASE + SZ_32K - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device da830_evm_nand_device = { + .name = "davinci_nand", + .id = 1, + .dev = { + .platform_data = &da830_evm_nand_pdata, + }, + .num_resources = ARRAY_SIZE(da830_evm_nand_resources), + .resource = da830_evm_nand_resources, +}; + +static inline void da830_evm_init_nand(int mux_mode) +{ + int ret; + + if (HAS_MMC) { + pr_warning("WARNING: both MMC/SD and NAND are " + "enabled, but they share AEMIF pins.\n" + "\tDisable MMC/SD for NAND support.\n"); + return; + } + + ret = da8xx_pinmux_setup(da830_evm_emif25_pins); + if (ret) + pr_warning("da830_evm_init: emif25 mux setup failed: %d\n", + ret); + + ret = platform_device_register(&da830_evm_nand_device); + if (ret) + pr_warning("da830_evm_init: NAND device not registered.\n"); + + gpio_direction_output(mux_mode, 1); +} +#else +static inline void da830_evm_init_nand(int mux_mode) { } +#endif + +#ifdef CONFIG_DA830_UI_LCD +static inline void da830_evm_init_lcdc(int mux_mode) +{ + int ret; + + ret = da8xx_pinmux_setup(da830_lcdcntl_pins); + if (ret) + pr_warning("da830_evm_init: lcdcntl mux setup failed: %d\n", + ret); + + ret = da8xx_register_lcdc(&sharp_lcd035q3dg01_pdata); + if (ret) + pr_warning("da830_evm_init: lcd setup failed: %d\n", ret); + + gpio_direction_output(mux_mode, 0); +} +#else +static inline void da830_evm_init_lcdc(int mux_mode) { } +#endif + +static struct at24_platform_data da830_evm_i2c_eeprom_info = { + .byte_len = SZ_256K / 8, + .page_size = 64, + .flags = AT24_FLAG_ADDR16, + .setup = davinci_get_mac_addr, + .context = (void *)0x7f00, +}; + +static int __init da830_evm_ui_expander_setup(struct i2c_client *client, + int gpio, unsigned ngpio, void *context) +{ + gpio_request(gpio + 6, "UI MUX_MODE"); + + /* Drive mux mode low to match the default without UI card */ + gpio_direction_output(gpio + 6, 0); + + da830_evm_init_lcdc(gpio + 6); + + da830_evm_init_nand(gpio + 6); + + return 0; +} + +static int da830_evm_ui_expander_teardown(struct i2c_client *client, int gpio, + unsigned ngpio, void *context) +{ + gpio_free(gpio + 6); + return 0; +} + +static struct pcf857x_platform_data __initdata da830_evm_ui_expander_info = { + .gpio_base = DAVINCI_N_GPIO, + .setup = da830_evm_ui_expander_setup, + .teardown = da830_evm_ui_expander_teardown, +}; + +static struct i2c_board_info __initdata da830_evm_i2c_devices[] = { + { + I2C_BOARD_INFO("24c256", 0x50), + .platform_data = &da830_evm_i2c_eeprom_info, + }, + { + I2C_BOARD_INFO("tlv320aic3x", 0x18), + }, + { + I2C_BOARD_INFO("pcf8574", 0x3f), + .platform_data = &da830_evm_ui_expander_info, + }, +}; + +static struct davinci_i2c_platform_data da830_evm_i2c_0_pdata = { + .bus_freq = 100, /* kHz */ + .bus_delay = 0, /* usec */ +}; + static __init void da830_evm_init(void) { struct davinci_soc_info *soc_info = &davinci_soc_info; @@ -94,6 +502,8 @@ static __init void da830_evm_init(void) pr_warning("da830_evm_init: i2c0 registration failed: %d\n", ret); + da830_evm_usb_init(); + soc_info->emac_pdata->phy_mask = DA830_EVM_PHY_MASK; soc_info->emac_pdata->mdio_max_freq = DA830_EVM_MDIO_FREQUENCY; soc_info->emac_pdata->rmii_en = 1; @@ -117,12 +527,18 @@ static __init void da830_evm_init(void) i2c_register_board_info(1, da830_evm_i2c_devices, ARRAY_SIZE(da830_evm_i2c_devices)); - ret = da8xx_pinmux_setup(da830_mcasp1_pins); + ret = da8xx_pinmux_setup(da830_evm_mcasp1_pins); if (ret) pr_warning("da830_evm_init: mcasp1 mux setup failed: %d\n", ret); - da8xx_init_mcasp(1, &da830_evm_snd_data); + da8xx_register_mcasp(1, &da830_evm_snd_data); + + da830_evm_init_mmc(); + + ret = da8xx_register_rtc(); + if (ret) + pr_warning("da830_evm_init: rtc setup failed: %d\n", ret); } #ifdef CONFIG_SERIAL_8250_CONSOLE @@ -146,7 +562,7 @@ static void __init da830_evm_map_io(void) da830_init(); } -MACHINE_START(DAVINCI_DA830_EVM, "DaVinci DA830/OMAP L137 EVM") +MACHINE_START(DAVINCI_DA830_EVM, "DaVinci DA830/OMAP-L137 EVM") .phys_io = IO_PHYS, .io_pg_offst = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc, .boot_params = (DA8XX_DDR_BASE + 0x100), diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c index c759d72494e..62b98bffc15 100644 --- a/arch/arm/mach-davinci/board-da850-evm.c +++ b/arch/arm/mach-davinci/board-da850-evm.c @@ -12,36 +12,38 @@ * or implied. */ #include <linux/kernel.h> -#include <linux/module.h> #include <linux/init.h> #include <linux/console.h> #include <linux/i2c.h> #include <linux/i2c/at24.h> +#include <linux/i2c/pca953x.h> #include <linux/gpio.h> #include <linux/platform_device.h> #include <linux/mtd/mtd.h> #include <linux/mtd/nand.h> #include <linux/mtd/partitions.h> #include <linux/mtd/physmap.h> +#include <linux/regulator/machine.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <mach/common.h> -#include <mach/irqs.h> #include <mach/cp_intc.h> #include <mach/da8xx.h> #include <mach/nand.h> +#include <mach/mux.h> #define DA850_EVM_PHY_MASK 0x1 #define DA850_EVM_MDIO_FREQUENCY 2200000 /* PHY bus frequency */ +#define DA850_LCD_PWR_PIN GPIO_TO_PIN(2, 8) #define DA850_LCD_BL_PIN GPIO_TO_PIN(2, 15) -#define DA850_LCD_PWR_PIN GPIO_TO_PIN(8, 10) #define DA850_MMCSD_CD_PIN GPIO_TO_PIN(4, 0) #define DA850_MMCSD_WP_PIN GPIO_TO_PIN(4, 1) +#define DA850_MII_MDIO_CLKEN_PIN GPIO_TO_PIN(2, 6) + static struct mtd_partition da850_evm_norflash_partition[] = { { .name = "NOR filesystem", @@ -143,10 +145,149 @@ static struct platform_device da850_evm_nandflash_device = { .resource = da850_evm_nandflash_resource, }; +static struct platform_device *da850_evm_devices[] __initdata = { + &da850_evm_nandflash_device, + &da850_evm_norflash_device, +}; + +#define DA8XX_AEMIF_CE2CFG_OFFSET 0x10 +#define DA8XX_AEMIF_ASIZE_16BIT 0x1 + +static void __init da850_evm_init_nor(void) +{ + void __iomem *aemif_addr; + + aemif_addr = ioremap(DA8XX_AEMIF_CTL_BASE, SZ_32K); + + /* Configure data bus width of CS2 to 16 bit */ + writel(readl(aemif_addr + DA8XX_AEMIF_CE2CFG_OFFSET) | + DA8XX_AEMIF_ASIZE_16BIT, + aemif_addr + DA8XX_AEMIF_CE2CFG_OFFSET); + + iounmap(aemif_addr); +} + +static u32 ui_card_detected; + +#if defined(CONFIG_MMC_DAVINCI) || \ + defined(CONFIG_MMC_DAVINCI_MODULE) +#define HAS_MMC 1 +#else +#define HAS_MMC 0 +#endif + +static __init void da850_evm_setup_nor_nand(void) +{ + int ret = 0; + + if (ui_card_detected & !HAS_MMC) { + ret = da8xx_pinmux_setup(da850_nand_pins); + if (ret) + pr_warning("da850_evm_init: nand mux setup failed: " + "%d\n", ret); + + ret = da8xx_pinmux_setup(da850_nor_pins); + if (ret) + pr_warning("da850_evm_init: nor mux setup failed: %d\n", + ret); + + da850_evm_init_nor(); + + platform_add_devices(da850_evm_devices, + ARRAY_SIZE(da850_evm_devices)); + } +} + +#ifdef CONFIG_DA850_UI_RMII +static inline void da850_evm_setup_emac_rmii(int rmii_sel) +{ + struct davinci_soc_info *soc_info = &davinci_soc_info; + + soc_info->emac_pdata->rmii_en = 1; + gpio_set_value(rmii_sel, 0); +} +#else +static inline void da850_evm_setup_emac_rmii(int rmii_sel) { } +#endif + +static int da850_evm_ui_expander_setup(struct i2c_client *client, unsigned gpio, + unsigned ngpio, void *c) +{ + int sel_a, sel_b, sel_c, ret; + + sel_a = gpio + 7; + sel_b = gpio + 6; + sel_c = gpio + 5; + + ret = gpio_request(sel_a, "sel_a"); + if (ret) { + pr_warning("Cannot open UI expander pin %d\n", sel_a); + goto exp_setup_sela_fail; + } + + ret = gpio_request(sel_b, "sel_b"); + if (ret) { + pr_warning("Cannot open UI expander pin %d\n", sel_b); + goto exp_setup_selb_fail; + } + + ret = gpio_request(sel_c, "sel_c"); + if (ret) { + pr_warning("Cannot open UI expander pin %d\n", sel_c); + goto exp_setup_selc_fail; + } + + /* deselect all functionalities */ + gpio_direction_output(sel_a, 1); + gpio_direction_output(sel_b, 1); + gpio_direction_output(sel_c, 1); + + ui_card_detected = 1; + pr_info("DA850/OMAP-L138 EVM UI card detected\n"); + + da850_evm_setup_nor_nand(); + + da850_evm_setup_emac_rmii(sel_a); + + return 0; + +exp_setup_selc_fail: + gpio_free(sel_b); +exp_setup_selb_fail: + gpio_free(sel_a); +exp_setup_sela_fail: + return ret; +} + +static int da850_evm_ui_expander_teardown(struct i2c_client *client, + unsigned gpio, unsigned ngpio, void *c) +{ + /* deselect all functionalities */ + gpio_set_value(gpio + 5, 1); + gpio_set_value(gpio + 6, 1); + gpio_set_value(gpio + 7, 1); + + gpio_free(gpio + 5); + gpio_free(gpio + 6); + gpio_free(gpio + 7); + + return 0; +} + +static struct pca953x_platform_data da850_evm_ui_expander_info = { + .gpio_base = DAVINCI_N_GPIO, + .setup = da850_evm_ui_expander_setup, + .teardown = da850_evm_ui_expander_teardown, +}; + static struct i2c_board_info __initdata da850_evm_i2c_devices[] = { { I2C_BOARD_INFO("tlv320aic3x", 0x18), - } + }, + { + I2C_BOARD_INFO("tca6416", 0x20), + .platform_data = &da850_evm_ui_expander_info, + }, }; static struct davinci_i2c_platform_data da850_evm_i2c_0_pdata = { @@ -158,11 +299,6 @@ static struct davinci_uart_config da850_evm_uart_config __initdata = { .enabled_uarts = 0x7, }; -static struct platform_device *da850_evm_devices[] __initdata = { - &da850_evm_nandflash_device, - &da850_evm_norflash_device, -}; - /* davinci da850 evm audio machine driver */ static u8 da850_iis_serializer_direction[] = { INACTIVE_MODE, INACTIVE_MODE, INACTIVE_MODE, INACTIVE_MODE, @@ -198,6 +334,8 @@ static struct davinci_mmc_config da850_mmc_config = { .get_ro = da850_evm_mmc_get_ro, .get_cd = da850_evm_mmc_get_cd, .wires = 4, + .max_freq = 50000000, + .caps = MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED, .version = MMC_CTLR_VERSION_2, }; @@ -233,56 +371,227 @@ static int da850_lcd_hw_init(void) return 0; } -#define DA8XX_AEMIF_CE2CFG_OFFSET 0x10 -#define DA8XX_AEMIF_ASIZE_16BIT 0x1 +/* TPS65070 voltage regulator support */ -static void __init da850_evm_init_nor(void) -{ - void __iomem *aemif_addr; +/* 3.3V */ +struct regulator_consumer_supply tps65070_dcdc1_consumers[] = { + { + .supply = "usb0_vdda33", + }, + { + .supply = "usb1_vdda33", + }, +}; - aemif_addr = ioremap(DA8XX_AEMIF_CTL_BASE, SZ_32K); +/* 3.3V or 1.8V */ +struct regulator_consumer_supply tps65070_dcdc2_consumers[] = { + { + .supply = "dvdd3318_a", + }, + { + .supply = "dvdd3318_b", + }, + { + .supply = "dvdd3318_c", + }, +}; - /* Configure data bus width of CS2 to 16 bit */ - writel(readl(aemif_addr + DA8XX_AEMIF_CE2CFG_OFFSET) | - DA8XX_AEMIF_ASIZE_16BIT, - aemif_addr + DA8XX_AEMIF_CE2CFG_OFFSET); +/* 1.2V */ +struct regulator_consumer_supply tps65070_dcdc3_consumers[] = { + { + .supply = "cvdd", + }, +}; - iounmap(aemif_addr); -} +/* 1.8V LDO */ +struct regulator_consumer_supply tps65070_ldo1_consumers[] = { + { + .supply = "sata_vddr", + }, + { + .supply = "usb0_vdda18", + }, + { + .supply = "usb1_vdda18", + }, + { + .supply = "ddr_dvdd18", + }, +}; -#if defined(CONFIG_MTD_PHYSMAP) || \ - defined(CONFIG_MTD_PHYSMAP_MODULE) -#define HAS_NOR 1 -#else -#define HAS_NOR 0 -#endif +/* 1.2V LDO */ +struct regulator_consumer_supply tps65070_ldo2_consumers[] = { + { + .supply = "sata_vdd", + }, + { + .supply = "pll0_vdda", + }, + { + .supply = "pll1_vdda", + }, + { + .supply = "usbs_cvdd", + }, + { + .supply = "vddarnwa1", + }, +}; -#if defined(CONFIG_MMC_DAVINCI) || \ - defined(CONFIG_MMC_DAVINCI_MODULE) -#define HAS_MMC 1 -#else -#define HAS_MMC 0 -#endif +struct regulator_init_data tps65070_regulator_data[] = { + /* dcdc1 */ + { + .constraints = { + .min_uV = 3150000, + .max_uV = 3450000, + .valid_ops_mask = (REGULATOR_CHANGE_VOLTAGE | + REGULATOR_CHANGE_STATUS), + .boot_on = 1, + }, + .num_consumer_supplies = ARRAY_SIZE(tps65070_dcdc1_consumers), + .consumer_supplies = tps65070_dcdc1_consumers, + }, -static __init void da850_evm_init(void) + /* dcdc2 */ + { + .constraints = { + .min_uV = 1710000, + .max_uV = 3450000, + .valid_ops_mask = (REGULATOR_CHANGE_VOLTAGE | + REGULATOR_CHANGE_STATUS), + .boot_on = 1, + }, + .num_consumer_supplies = ARRAY_SIZE(tps65070_dcdc2_consumers), + .consumer_supplies = tps65070_dcdc2_consumers, + }, + + /* dcdc3 */ + { + .constraints = { + .min_uV = 950000, + .max_uV = 1320000, + .valid_ops_mask = (REGULATOR_CHANGE_VOLTAGE | + REGULATOR_CHANGE_STATUS), + .boot_on = 1, + }, + .num_consumer_supplies = ARRAY_SIZE(tps65070_dcdc3_consumers), + .consumer_supplies = tps65070_dcdc3_consumers, + }, + + /* ldo1 */ + { + .constraints = { + .min_uV = 1710000, + .max_uV = 1890000, + .valid_ops_mask = (REGULATOR_CHANGE_VOLTAGE | + REGULATOR_CHANGE_STATUS), + .boot_on = 1, + }, + .num_consumer_supplies = ARRAY_SIZE(tps65070_ldo1_consumers), + .consumer_supplies = tps65070_ldo1_consumers, + }, + + /* ldo2 */ + { + .constraints = { + .min_uV = 1140000, + .max_uV = 1320000, + .valid_ops_mask = (REGULATOR_CHANGE_VOLTAGE | + REGULATOR_CHANGE_STATUS), + .boot_on = 1, + }, + .num_consumer_supplies = ARRAY_SIZE(tps65070_ldo2_consumers), + .consumer_supplies = tps65070_ldo2_consumers, + }, +}; + +static struct i2c_board_info __initdata da850evm_tps65070_info[] = { + { + I2C_BOARD_INFO("tps6507x", 0x48), + .platform_data = &tps65070_regulator_data[0], + }, +}; + +static int __init pmic_tps65070_init(void) { - struct davinci_soc_info *soc_info = &davinci_soc_info; + return i2c_register_board_info(1, da850evm_tps65070_info, + ARRAY_SIZE(da850evm_tps65070_info)); +} + +static const short da850_evm_lcdc_pins[] = { + DA850_GPIO2_8, DA850_GPIO2_15, + -1 +}; + +static int __init da850_evm_config_emac(void) +{ + void __iomem *cfg_chip3_base; int ret; + u32 val; + struct davinci_soc_info *soc_info = &davinci_soc_info; + u8 rmii_en = soc_info->emac_pdata->rmii_en; + + if (!machine_is_davinci_da850_evm()) + return 0; + + cfg_chip3_base = DA8XX_SYSCFG_VIRT(DA8XX_CFGCHIP3_REG); + + val = __raw_readl(cfg_chip3_base); + + if (rmii_en) { + val |= BIT(8); + ret = da8xx_pinmux_setup(da850_rmii_pins); + pr_info("EMAC: RMII PHY configured, MII PHY will not be" + " functional\n"); + } else { + val &= ~BIT(8); + ret = da8xx_pinmux_setup(da850_cpgmac_pins); + pr_info("EMAC: MII PHY configured, RMII PHY will not be" + " functional\n"); + } - ret = da8xx_pinmux_setup(da850_nand_pins); if (ret) - pr_warning("da850_evm_init: nand mux setup failed: %d\n", + pr_warning("da850_evm_init: cpgmac/rmii mux setup failed: %d\n", ret); - ret = da8xx_pinmux_setup(da850_nor_pins); + /* configure the CFGCHIP3 register for RMII or MII */ + __raw_writel(val, cfg_chip3_base); + + ret = davinci_cfg_reg(DA850_GPIO2_6); if (ret) - pr_warning("da850_evm_init: nor mux setup failed: %d\n", + pr_warning("da850_evm_init:GPIO(2,6) mux setup " + "failed\n"); + + ret = gpio_request(DA850_MII_MDIO_CLKEN_PIN, "mdio_clk_en"); + if (ret) { + pr_warning("Cannot open GPIO %d\n", + DA850_MII_MDIO_CLKEN_PIN); + return ret; + } + + /* Enable/Disable MII MDIO clock */ + gpio_direction_output(DA850_MII_MDIO_CLKEN_PIN, rmii_en); + + soc_info->emac_pdata->phy_mask = DA850_EVM_PHY_MASK; + soc_info->emac_pdata->mdio_max_freq = DA850_EVM_MDIO_FREQUENCY; + + ret = da8xx_register_emac(); + if (ret) + pr_warning("da850_evm_init: emac registration failed: %d\n", ret); - da850_evm_init_nor(); + return 0; +} +device_initcall(da850_evm_config_emac); + +static __init void da850_evm_init(void) +{ + int ret; - platform_add_devices(da850_evm_devices, - ARRAY_SIZE(da850_evm_devices)); + ret = pmic_tps65070_init(); + if (ret) + pr_warning("da850_evm_init: TPS65070 PMIC init failed: %d\n", + ret); ret = da8xx_register_edma(); if (ret) @@ -299,19 +608,6 @@ static __init void da850_evm_init(void) pr_warning("da850_evm_init: i2c0 registration failed: %d\n", ret); - soc_info->emac_pdata->phy_mask = DA850_EVM_PHY_MASK; - soc_info->emac_pdata->mdio_max_freq = DA850_EVM_MDIO_FREQUENCY; - soc_info->emac_pdata->rmii_en = 0; - - ret = da8xx_pinmux_setup(da850_cpgmac_pins); - if (ret) - pr_warning("da850_evm_init: cpgmac mux setup failed: %d\n", - ret); - - ret = da8xx_register_emac(); - if (ret) - pr_warning("da850_evm_init: emac registration failed: %d\n", - ret); ret = da8xx_register_watchdog(); if (ret) @@ -319,11 +615,6 @@ static __init void da850_evm_init(void) ret); if (HAS_MMC) { - if (HAS_NOR) - pr_warning("WARNING: both NOR Flash and MMC/SD are " - "enabled, but they share AEMIF pins.\n" - "\tDisable one of them.\n"); - ret = da8xx_pinmux_setup(da850_mmcsd0_pins); if (ret) pr_warning("da850_evm_init: mmcsd0 mux setup failed:" @@ -365,22 +656,42 @@ static __init void da850_evm_init(void) pr_warning("da850_evm_init: mcasp mux setup failed: %d\n", ret); - da8xx_init_mcasp(0, &da850_evm_snd_data); + da8xx_register_mcasp(0, &da850_evm_snd_data); ret = da8xx_pinmux_setup(da850_lcdcntl_pins); if (ret) pr_warning("da850_evm_init: lcdcntl mux setup failed: %d\n", ret); + /* Handle board specific muxing for LCD here */ + ret = da8xx_pinmux_setup(da850_evm_lcdc_pins); + if (ret) + pr_warning("da850_evm_init: evm specific lcd mux setup " + "failed: %d\n", ret); + ret = da850_lcd_hw_init(); if (ret) pr_warning("da850_evm_init: lcd initialization failed: %d\n", ret); - ret = da8xx_register_lcdc(); + ret = da8xx_register_lcdc(&sharp_lk043t1dg01_pdata); if (ret) pr_warning("da850_evm_init: lcdc registration failed: %d\n", ret); + + ret = da8xx_register_rtc(); + if (ret) + pr_warning("da850_evm_init: rtc setup failed: %d\n", ret); + + ret = da850_register_cpufreq(); + if (ret) + pr_warning("da850_evm_init: cpufreq registration failed: %d\n", + ret); + + ret = da8xx_register_cpuidle(); + if (ret) + pr_warning("da850_evm_init: cpuidle registration failed: %d\n", + ret); } #ifdef CONFIG_SERIAL_8250_CONSOLE diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c index 77e80679882..a9b650dcc17 100644 --- a/arch/arm/mach-davinci/board-dm355-evm.c +++ b/arch/arm/mach-davinci/board-dm355-evm.c @@ -9,15 +9,13 @@ * or implied. */ #include <linux/kernel.h> -#include <linux/module.h> #include <linux/init.h> -#include <linux/dma-mapping.h> +#include <linux/err.h> #include <linux/platform_device.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> #include <linux/mtd/nand.h> #include <linux/i2c.h> -#include <linux/io.h> #include <linux/gpio.h> #include <linux/clk.h> #include <linux/videodev2.h> @@ -25,20 +23,15 @@ #include <linux/spi/spi.h> #include <linux/spi/eeprom.h> -#include <asm/setup.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/flash.h> -#include <mach/hardware.h> #include <mach/dm355.h> -#include <mach/psc.h> -#include <mach/common.h> #include <mach/i2c.h> #include <mach/serial.h> #include <mach/nand.h> #include <mach/mmc.h> +#include <mach/usb.h> #define DAVINCI_ASYNC_EMIF_CONTROL_BASE 0x01e10000 #define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE 0x02000000 @@ -86,8 +79,9 @@ static struct davinci_nand_pdata davinci_nand_data = { .mask_chipsel = BIT(14), .parts = davinci_nand_partitions, .nr_parts = ARRAY_SIZE(davinci_nand_partitions), - .ecc_mode = NAND_ECC_HW_SYNDROME, + .ecc_mode = NAND_ECC_HW, .options = NAND_USE_FLASH_BBT, + .ecc_bits = 4, }; static struct resource davinci_nand_resources[] = { @@ -344,7 +338,7 @@ static __init void dm355_evm_init(void) gpio_request(2, "usb_id_toggle"); gpio_direction_output(2, USB_ID_VALUE); /* irlml6401 switches over 1A in under 8 msec */ - setup_usb(500, 8); + davinci_setup_usb(1000, 8); davinci_setup_mmc(0, &dm355evm_mmc_config); davinci_setup_mmc(1, &dm355evm_mmc_config); diff --git a/arch/arm/mach-davinci/board-dm355-leopard.c b/arch/arm/mach-davinci/board-dm355-leopard.c index 84ad5d161a8..21f32eb41e8 100644 --- a/arch/arm/mach-davinci/board-dm355-leopard.c +++ b/arch/arm/mach-davinci/board-dm355-leopard.c @@ -8,34 +8,27 @@ * warranty of any kind, whether express or implied. */ #include <linux/kernel.h> -#include <linux/module.h> #include <linux/init.h> -#include <linux/dma-mapping.h> +#include <linux/err.h> #include <linux/platform_device.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> #include <linux/mtd/nand.h> #include <linux/i2c.h> -#include <linux/io.h> #include <linux/gpio.h> #include <linux/clk.h> #include <linux/spi/spi.h> #include <linux/spi/eeprom.h> -#include <asm/setup.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/flash.h> -#include <mach/hardware.h> #include <mach/dm355.h> -#include <mach/psc.h> -#include <mach/common.h> #include <mach/i2c.h> #include <mach/serial.h> #include <mach/nand.h> #include <mach/mmc.h> +#include <mach/usb.h> #define DAVINCI_ASYNC_EMIF_CONTROL_BASE 0x01e10000 #define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE 0x02000000 @@ -270,7 +263,7 @@ static __init void dm355_leopard_init(void) gpio_request(2, "usb_id_toggle"); gpio_direction_output(2, USB_ID_VALUE); /* irlml6401 switches over 1A in under 8 msec */ - setup_usb(500, 8); + davinci_setup_usb(1000, 8); davinci_setup_mmc(0, &dm355leopard_mmc_config); davinci_setup_mmc(1, &dm355leopard_mmc_config); diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c index 52dd8046b30..289fe1b7d25 100644 --- a/arch/arm/mach-davinci/board-dm365-evm.c +++ b/arch/arm/mach-davinci/board-dm365-evm.c @@ -13,9 +13,8 @@ * GNU General Public License for more details. */ #include <linux/kernel.h> -#include <linux/module.h> #include <linux/init.h> -#include <linux/dma-mapping.h> +#include <linux/err.h> #include <linux/i2c.h> #include <linux/io.h> #include <linux/clk.h> @@ -24,20 +23,19 @@ #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> #include <linux/mtd/nand.h> -#include <asm/setup.h> +#include <linux/input.h> + #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <asm/mach/map.h> + #include <mach/mux.h> -#include <mach/hardware.h> #include <mach/dm365.h> -#include <mach/psc.h> #include <mach/common.h> #include <mach/i2c.h> #include <mach/serial.h> #include <mach/mmc.h> #include <mach/nand.h> - +#include <mach/keyscan.h> static inline int have_imager(void) { @@ -144,6 +142,7 @@ static struct davinci_nand_pdata davinci_nand_data = { .nr_parts = ARRAY_SIZE(davinci_nand_partitions), .ecc_mode = NAND_ECC_HW, .options = NAND_USE_FLASH_BBT, + .ecc_bits = 4, }; static struct resource davinci_nand_resources[] = { @@ -176,11 +175,16 @@ static struct at24_platform_data eeprom_info = { .context = (void *)0x7f00, }; +static struct snd_platform_data dm365_evm_snd_data; + static struct i2c_board_info i2c_info[] = { { I2C_BOARD_INFO("24c256", 0x50), .platform_data = &eeprom_info, }, + { + I2C_BOARD_INFO("tlv320aic3x", 0x18), + }, }; static struct davinci_i2c_platform_data i2c_pdata = { @@ -188,6 +192,38 @@ static struct davinci_i2c_platform_data i2c_pdata = { .bus_delay = 0 /* usec */, }; +#ifdef CONFIG_KEYBOARD_DAVINCI +static unsigned short dm365evm_keymap[] = { + KEY_KP2, + KEY_LEFT, + KEY_EXIT, + KEY_DOWN, + KEY_ENTER, + KEY_UP, + KEY_KP1, + KEY_RIGHT, + KEY_MENU, + KEY_RECORD, + KEY_REWIND, + KEY_KPMINUS, + KEY_STOP, + KEY_FASTFORWARD, + KEY_KPPLUS, + KEY_PLAYPAUSE, + 0 +}; + +static struct davinci_ks_platform_data dm365evm_ks_data = { + .keymap = dm365evm_keymap, + .keymapsize = ARRAY_SIZE(dm365evm_keymap), + .rep = 1, + /* Scan period = strobe + interval */ + .strobe = 0x5, + .interval = 0x2, + .matrix_type = DAVINCI_KEYSCAN_MATRIX_4X4, +}; +#endif + static int cpld_mmc_get_cd(int module) { if (!cpld) @@ -472,6 +508,13 @@ static __init void dm365_evm_init(void) /* maybe setup mmc1/etc ... _after_ mmc0 */ evm_init_cpld(); + + dm365_init_asp(&dm365_evm_snd_data); + dm365_init_rtc(); + +#ifdef CONFIG_KEYBOARD_DAVINCI + dm365_init_ks(&dm365evm_ks_data); +#endif } static __init void dm365_evm_irq_init(void) diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c index 1213a0087ad..fd0398bc6db 100644 --- a/arch/arm/mach-davinci/board-dm644x-evm.c +++ b/arch/arm/mach-davinci/board-dm644x-evm.c @@ -9,45 +9,34 @@ * or implied. */ #include <linux/kernel.h> -#include <linux/module.h> #include <linux/init.h> #include <linux/dma-mapping.h> #include <linux/platform_device.h> #include <linux/gpio.h> -#include <linux/leds.h> -#include <linux/memory.h> - #include <linux/i2c.h> #include <linux/i2c/pcf857x.h> #include <linux/i2c/at24.h> -#include <linux/etherdevice.h> #include <linux/mtd/mtd.h> #include <linux/mtd/nand.h> #include <linux/mtd/partitions.h> #include <linux/mtd/physmap.h> -#include <linux/io.h> #include <linux/phy.h> #include <linux/clk.h> #include <linux/videodev2.h> #include <media/tvp514x.h> -#include <asm/setup.h> #include <asm/mach-types.h> - #include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/flash.h> #include <mach/dm644x.h> #include <mach/common.h> #include <mach/i2c.h> #include <mach/serial.h> #include <mach/mux.h> -#include <mach/psc.h> #include <mach/nand.h> #include <mach/mmc.h> -#include <mach/emac.h> +#include <mach/usb.h> #define DM644X_EVM_PHY_MASK (0x2) #define DM644X_EVM_MDIO_FREQUENCY (2200000) /* PHY bus frequency */ @@ -477,7 +466,7 @@ evm_u35_setup(struct i2c_client *client, int gpio, unsigned ngpio, void *c) /* irlml6401 switches over 1A, in under 8 msec; * now it can be managed by nDRV_VBUS ... */ - setup_usb(500, 8); + davinci_setup_usb(1000, 8); return 0; } diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c index 24e0e13b149..8d0b0e01c59 100644 --- a/arch/arm/mach-davinci/board-dm646x-evm.c +++ b/arch/arm/mach-davinci/board-dm646x-evm.c @@ -17,38 +17,28 @@ **************************************************************************/ #include <linux/kernel.h> -#include <linux/module.h> #include <linux/init.h> -#include <linux/fs.h> -#include <linux/major.h> -#include <linux/root_dev.h> -#include <linux/dma-mapping.h> -#include <linux/serial.h> -#include <linux/serial_8250.h> #include <linux/leds.h> #include <linux/gpio.h> -#include <linux/io.h> #include <linux/platform_device.h> #include <linux/i2c.h> #include <linux/i2c/at24.h> #include <linux/i2c/pcf857x.h> -#include <linux/etherdevice.h> #include <media/tvp514x.h> -#include <asm/setup.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/nand.h> +#include <linux/mtd/partitions.h> + #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/flash.h> #include <mach/dm646x.h> #include <mach/common.h> -#include <mach/psc.h> #include <mach/serial.h> #include <mach/i2c.h> -#include <mach/mmc.h> -#include <mach/emac.h> +#include <mach/nand.h> #if defined(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \ defined(CONFIG_BLK_DEV_PALMCHIP_BK3710_MODULE) @@ -57,6 +47,11 @@ #define HAS_ATA 0 #endif +#define DAVINCI_ASYNC_EMIF_CONTROL_BASE 0x20008000 +#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE 0x42000000 + +#define NAND_BLOCK_SIZE SZ_128K + /* CPLD Register 0 bits to control ATA */ #define DM646X_EVM_ATA_RST BIT(0) #define DM646X_EVM_ATA_PWD BIT(1) @@ -92,6 +87,63 @@ static struct davinci_uart_config uart_config __initdata = { .enabled_uarts = (1 << 0), }; +/* Note: We are setting first partition as 'bootloader' constituting UBL, U-Boot + * and U-Boot environment this avoids dependency on any particular combination + * of UBL, U-Boot or flashing tools etc. + */ +static struct mtd_partition davinci_nand_partitions[] = { + { + /* UBL, U-Boot with environment */ + .name = "bootloader", + .offset = MTDPART_OFS_APPEND, + .size = 16 * NAND_BLOCK_SIZE, + .mask_flags = MTD_WRITEABLE, /* force read-only */ + }, { + .name = "kernel", + .offset = MTDPART_OFS_APPEND, + .size = SZ_4M, + .mask_flags = 0, + }, { + .name = "filesystem", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + .mask_flags = 0, + } +}; + +static struct davinci_nand_pdata davinci_nand_data = { + .mask_cle = 0x80000, + .mask_ale = 0x40000, + .parts = davinci_nand_partitions, + .nr_parts = ARRAY_SIZE(davinci_nand_partitions), + .ecc_mode = NAND_ECC_HW, + .options = 0, +}; + +static struct resource davinci_nand_resources[] = { + { + .start = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE, + .end = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE + SZ_32M - 1, + .flags = IORESOURCE_MEM, + }, { + .start = DAVINCI_ASYNC_EMIF_CONTROL_BASE, + .end = DAVINCI_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device davinci_nand_device = { + .name = "davinci_nand", + .id = 0, + + .num_resources = ARRAY_SIZE(davinci_nand_resources), + .resource = davinci_nand_resources, + + .dev = { + .platform_data = &davinci_nand_data, + }, +}; + /* CPLD Register 0 Client: used for I/O Control */ static int cpld_reg0_probe(struct i2c_client *client, const struct i2c_device_id *id) @@ -142,7 +194,7 @@ static struct gpio_led evm_leds[] = { { .name = "DS4", .active_low = 1, }, }; -static __initconst struct gpio_led_platform_data evm_led_data = { +static const struct gpio_led_platform_data evm_led_data = { .num_leds = ARRAY_SIZE(evm_leds), .leds = evm_leds, }; @@ -647,6 +699,8 @@ static __init void evm_init(void) dm646x_init_mcasp0(&dm646x_evm_snd_data[0]); dm646x_init_mcasp1(&dm646x_evm_snd_data[1]); + platform_device_register(&davinci_nand_device); + if (HAS_ATA) dm646x_init_ide(); diff --git a/arch/arm/mach-davinci/board-neuros-osd2.c b/arch/arm/mach-davinci/board-neuros-osd2.c new file mode 100644 index 00000000000..bd9ca079b69 --- /dev/null +++ b/arch/arm/mach-davinci/board-neuros-osd2.c @@ -0,0 +1,323 @@ +/* + * Neuros Technologies OSD2 board support + * + * Modified from original 644X-EVM board support. + * 2008 (c) Neuros Technology, LLC. + * 2009 (c) Jorge Luis Zapata Muga <jorgeluis.zapata@gmail.com> + * 2009 (c) Andrey A. Porodko <Andrey.Porodko@gmail.com> + * + * The Neuros OSD 2.0 is the hardware component of the Neuros Open + * Internet Television Platform. Hardware is very close to TI + * DM644X-EVM board. It has: + * DM6446M02 module with 256MB NAND, 256MB RAM, TLV320AIC32 AIC, + * USB, Ethernet, SD/MMC, UART, THS8200, TVP7000 for video. + * Additionaly realtime clock, IR remote control receiver, + * IR Blaster based on MSP430 (firmware although is different + * from used in DM644X-EVM), internal ATA-6 3.5” HDD drive + * with PATA interface, two muxed red-green leds. + * + * For more information please refer to + * http://wiki.neurostechnology.com/index.php/OSD_2.0_HD + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ +#include <linux/platform_device.h> +#include <linux/gpio.h> +#include <linux/mtd/partitions.h> + +#include <asm/mach-types.h> +#include <asm/mach/arch.h> + +#include <mach/dm644x.h> +#include <mach/i2c.h> +#include <mach/serial.h> +#include <mach/mux.h> +#include <mach/nand.h> +#include <mach/mmc.h> +#include <mach/usb.h> + +#define NEUROS_OSD2_PHY_MASK 0x2 +#define NEUROS_OSD2_MDIO_FREQUENCY 2200000 /* PHY bus frequency */ + +#define DAVINCI_CFC_ATA_BASE 0x01C66000 + +#define DAVINCI_ASYNC_EMIF_CONTROL_BASE 0x01e00000 +#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE 0x02000000 + +#define LXT971_PHY_ID 0x001378e2 +#define LXT971_PHY_MASK 0xfffffff0 + +#define NTOSD2_AUDIOSOC_I2C_ADDR 0x18 +#define NTOSD2_MSP430_I2C_ADDR 0x59 +#define NTOSD2_MSP430_IRQ 2 + +/* Neuros OSD2 has a Samsung 256 MByte NAND flash (Dev ID of 0xAA, + * 2048 blocks in the device, 64 pages per block, 2048 bytes per + * page. + */ + +#define NAND_BLOCK_SIZE SZ_128K + +struct mtd_partition davinci_ntosd2_nandflash_partition[] = { + { + /* UBL (a few copies) plus U-Boot */ + .name = "bootloader", + .offset = 0, + .size = 15 * NAND_BLOCK_SIZE, + .mask_flags = MTD_WRITEABLE, /* force read-only */ + }, { + /* U-Boot environment */ + .name = "params", + .offset = MTDPART_OFS_APPEND, + .size = 1 * NAND_BLOCK_SIZE, + .mask_flags = 0, + }, { + /* Kernel */ + .name = "kernel", + .offset = MTDPART_OFS_APPEND, + .size = SZ_4M, + .mask_flags = 0, + }, { + /* File System */ + .name = "filesystem", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + .mask_flags = 0, + } + /* A few blocks at end hold a flash Bad Block Table. */ +}; + +static struct davinci_nand_pdata davinci_ntosd2_nandflash_data = { + .parts = davinci_ntosd2_nandflash_partition, + .nr_parts = ARRAY_SIZE(davinci_ntosd2_nandflash_partition), + .ecc_mode = NAND_ECC_HW, + .options = NAND_USE_FLASH_BBT, +}; + +static struct resource davinci_ntosd2_nandflash_resource[] = { + { + .start = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE, + .end = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE + SZ_16M - 1, + .flags = IORESOURCE_MEM, + }, { + .start = DAVINCI_ASYNC_EMIF_CONTROL_BASE, + .end = DAVINCI_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device davinci_ntosd2_nandflash_device = { + .name = "davinci_nand", + .id = 0, + .dev = { + .platform_data = &davinci_ntosd2_nandflash_data, + }, + .num_resources = ARRAY_SIZE(davinci_ntosd2_nandflash_resource), + .resource = davinci_ntosd2_nandflash_resource, +}; + +static u64 davinci_fb_dma_mask = DMA_BIT_MASK(32); + +static struct platform_device davinci_fb_device = { + .name = "davincifb", + .id = -1, + .dev = { + .dma_mask = &davinci_fb_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .num_resources = 0, +}; + +static struct resource ide_resources[] = { + { + .start = DAVINCI_CFC_ATA_BASE, + .end = DAVINCI_CFC_ATA_BASE + 0x7ff, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_IDE, + .end = IRQ_IDE, + .flags = IORESOURCE_IRQ, + }, +}; + +static u64 ide_dma_mask = DMA_BIT_MASK(32); + +static struct platform_device ide_dev = { + .name = "palm_bk3710", + .id = -1, + .resource = ide_resources, + .num_resources = ARRAY_SIZE(ide_resources), + .dev = { + .dma_mask = &ide_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, +}; + +static struct snd_platform_data dm644x_ntosd2_snd_data; + +static struct gpio_led ntosd2_leds[] = { + { .name = "led1_green", .gpio = GPIO(10), }, + { .name = "led1_red", .gpio = GPIO(11), }, + { .name = "led2_green", .gpio = GPIO(12), }, + { .name = "led2_red", .gpio = GPIO(13), }, +}; + +static struct gpio_led_platform_data ntosd2_leds_data = { + .num_leds = ARRAY_SIZE(ntosd2_leds), + .leds = ntosd2_leds, +}; + +static struct platform_device ntosd2_leds_dev = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &ntosd2_leds_data, + }, +}; + + +static struct platform_device *davinci_ntosd2_devices[] __initdata = { + &davinci_fb_device, + &ntosd2_leds_dev, +}; + +static struct davinci_uart_config uart_config __initdata = { + .enabled_uarts = (1 << 0), +}; + +static void __init davinci_ntosd2_map_io(void) +{ + dm644x_init(); +} + +/* + I2C initialization +*/ +static struct davinci_i2c_platform_data ntosd2_i2c_pdata = { + .bus_freq = 20 /* kHz */, + .bus_delay = 100 /* usec */, +}; + +static struct i2c_board_info __initdata ntosd2_i2c_info[] = { +}; + +static int ntosd2_init_i2c(void) +{ + int status; + + davinci_init_i2c(&ntosd2_i2c_pdata); + status = gpio_request(NTOSD2_MSP430_IRQ, ntosd2_i2c_info[0].type); + if (status == 0) { + status = gpio_direction_input(NTOSD2_MSP430_IRQ); + if (status == 0) { + status = gpio_to_irq(NTOSD2_MSP430_IRQ); + if (status > 0) { + ntosd2_i2c_info[0].irq = status; + i2c_register_board_info(1, + ntosd2_i2c_info, + ARRAY_SIZE(ntosd2_i2c_info)); + } + } + } + return status; +} + +static struct davinci_mmc_config davinci_ntosd2_mmc_config = { + .wires = 4, + .version = MMC_CTLR_VERSION_1 +}; + + +#if defined(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \ + defined(CONFIG_BLK_DEV_PALMCHIP_BK3710_MODULE) +#define HAS_ATA 1 +#else +#define HAS_ATA 0 +#endif + +#if defined(CONFIG_MTD_NAND_DAVINCI) || \ + defined(CONFIG_MTD_NAND_DAVINCI_MODULE) +#define HAS_NAND 1 +#else +#define HAS_NAND 0 +#endif + +static __init void davinci_ntosd2_init(void) +{ + struct clk *aemif_clk; + struct davinci_soc_info *soc_info = &davinci_soc_info; + int status; + + aemif_clk = clk_get(NULL, "aemif"); + clk_enable(aemif_clk); + + if (HAS_ATA) { + if (HAS_NAND) + pr_warning("WARNING: both IDE and Flash are " + "enabled, but they share AEMIF pins.\n" + "\tDisable IDE for NAND/NOR support.\n"); + davinci_cfg_reg(DM644X_HPIEN_DISABLE); + davinci_cfg_reg(DM644X_ATAEN); + davinci_cfg_reg(DM644X_HDIREN); + platform_device_register(&ide_dev); + } else if (HAS_NAND) { + davinci_cfg_reg(DM644X_HPIEN_DISABLE); + davinci_cfg_reg(DM644X_ATAEN_DISABLE); + + /* only one device will be jumpered and detected */ + if (HAS_NAND) + platform_device_register( + &davinci_ntosd2_nandflash_device); + } + + platform_add_devices(davinci_ntosd2_devices, + ARRAY_SIZE(davinci_ntosd2_devices)); + + /* Initialize I2C interface specific for this board */ + status = ntosd2_init_i2c(); + if (status < 0) + pr_warning("davinci_ntosd2_init: msp430 irq setup failed:" + " %d\n", status); + + davinci_serial_init(&uart_config); + dm644x_init_asp(&dm644x_ntosd2_snd_data); + + soc_info->emac_pdata->phy_mask = NEUROS_OSD2_PHY_MASK; + soc_info->emac_pdata->mdio_max_freq = NEUROS_OSD2_MDIO_FREQUENCY; + + davinci_setup_usb(1000, 8); + /* + * Mux the pins to be GPIOs, VLYNQEN is already done at startup. + * The AEAWx are five new AEAW pins that can be muxed by separately. + * They are a bitmask for GPIO management. According TI + * documentation (http://www.ti.com/lit/gpn/tms320dm6446) to employ + * gpio(10,11,12,13) for leds any combination of bits works except + * four last. So we are to reset all five. + */ + davinci_cfg_reg(DM644X_AEAW0); + davinci_cfg_reg(DM644X_AEAW1); + davinci_cfg_reg(DM644X_AEAW2); + davinci_cfg_reg(DM644X_AEAW3); + davinci_cfg_reg(DM644X_AEAW4); + + davinci_setup_mmc(0, &davinci_ntosd2_mmc_config); +} + +static __init void davinci_ntosd2_irq_init(void) +{ + davinci_irq_init(); +} + +MACHINE_START(NEUROS_OSD2, "Neuros OSD2") + /* Maintainer: Neuros Technologies <neuros@groups.google.com> */ + .phys_io = IO_PHYS, + .io_pg_offst = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc, + .boot_params = (DAVINCI_DDR_BASE + 0x100), + .map_io = davinci_ntosd2_map_io, + .init_irq = davinci_ntosd2_irq_init, + .timer = &davinci_timer, + .init_machine = davinci_ntosd2_init, +MACHINE_END diff --git a/arch/arm/mach-davinci/board-sffsdr.c b/arch/arm/mach-davinci/board-sffsdr.c index 7acdfd8ac07..08d373bfcc8 100644 --- a/arch/arm/mach-davinci/board-sffsdr.c +++ b/arch/arm/mach-davinci/board-sffsdr.c @@ -23,35 +23,24 @@ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ -#include <linux/kernel.h> -#include <linux/module.h> #include <linux/init.h> -#include <linux/dma-mapping.h> #include <linux/platform_device.h> -#include <linux/gpio.h> - #include <linux/i2c.h> #include <linux/i2c/at24.h> -#include <linux/etherdevice.h> #include <linux/mtd/mtd.h> #include <linux/mtd/nand.h> #include <linux/mtd/partitions.h> -#include <linux/mtd/physmap.h> -#include <linux/io.h> -#include <asm/setup.h> #include <asm/mach-types.h> - #include <asm/mach/arch.h> -#include <asm/mach/map.h> #include <asm/mach/flash.h> #include <mach/dm644x.h> #include <mach/common.h> #include <mach/i2c.h> #include <mach/serial.h> -#include <mach/psc.h> #include <mach/mux.h> +#include <mach/usb.h> #define SFFSDR_PHY_MASK (0x2) #define SFFSDR_MDIO_FREQUENCY (2200000) /* PHY bus frequency */ @@ -107,11 +96,6 @@ static struct platform_device davinci_sffsdr_nandflash_device = { .resource = davinci_sffsdr_nandflash_resource, }; -static struct emac_platform_data sffsdr_emac_pdata = { - .phy_mask = SFFSDR_PHY_MASK, - .mdio_max_freq = SFFSDR_MDIO_FREQUENCY, -}; - static struct at24_platform_data eeprom_info = { .byte_len = (64*1024) / 8, .page_size = 32, @@ -164,7 +148,7 @@ static __init void davinci_sffsdr_init(void) davinci_serial_init(&uart_config); soc_info->emac_pdata->phy_mask = SFFSDR_PHY_MASK; soc_info->emac_pdata->mdio_max_freq = SFFSDR_MDIO_FREQUENCY; - setup_usb(0, 0); /* We support only peripheral mode. */ + davinci_setup_usb(0, 0); /* We support only peripheral mode. */ /* mux VLYNQ pins */ davinci_cfg_reg(DM644X_VLYNQEN); diff --git a/arch/arm/mach-davinci/clock.c b/arch/arm/mach-davinci/clock.c index 83d54d50b5e..baece65cb9c 100644 --- a/arch/arm/mach-davinci/clock.c +++ b/arch/arm/mach-davinci/clock.c @@ -17,8 +17,8 @@ #include <linux/clk.h> #include <linux/err.h> #include <linux/mutex.h> -#include <linux/platform_device.h> #include <linux/io.h> +#include <linux/delay.h> #include <mach/hardware.h> @@ -42,8 +42,7 @@ static void __clk_enable(struct clk *clk) if (clk->parent) __clk_enable(clk->parent); if (clk->usecount++ == 0 && (clk->flags & CLK_PSC)) - davinci_psc_config(psc_domain(clk), clk->psc_ctlr, - clk->lpsc, 1); + davinci_psc_config(psc_domain(clk), clk->gpsc, clk->lpsc, 1); } static void __clk_disable(struct clk *clk) @@ -51,8 +50,7 @@ static void __clk_disable(struct clk *clk) if (WARN_ON(clk->usecount == 0)) return; if (--clk->usecount == 0 && !(clk->flags & CLK_PLL)) - davinci_psc_config(psc_domain(clk), clk->psc_ctlr, - clk->lpsc, 0); + davinci_psc_config(psc_domain(clk), clk->gpsc, clk->lpsc, 0); if (clk->parent) __clk_disable(clk->parent); } @@ -99,20 +97,74 @@ long clk_round_rate(struct clk *clk, unsigned long rate) if (clk == NULL || IS_ERR(clk)) return -EINVAL; + if (clk->round_rate) + return clk->round_rate(clk, rate); + return clk->rate; } EXPORT_SYMBOL(clk_round_rate); +/* Propagate rate to children */ +static void propagate_rate(struct clk *root) +{ + struct clk *clk; + + list_for_each_entry(clk, &root->children, childnode) { + if (clk->recalc) + clk->rate = clk->recalc(clk); + propagate_rate(clk); + } +} + int clk_set_rate(struct clk *clk, unsigned long rate) { + unsigned long flags; + int ret = -EINVAL; + if (clk == NULL || IS_ERR(clk)) - return -EINVAL; + return ret; - /* changing the clk rate is not supported */ - return -EINVAL; + spin_lock_irqsave(&clockfw_lock, flags); + if (clk->set_rate) + ret = clk->set_rate(clk, rate); + if (ret == 0) { + if (clk->recalc) + clk->rate = clk->recalc(clk); + propagate_rate(clk); + } + spin_unlock_irqrestore(&clockfw_lock, flags); + + return ret; } EXPORT_SYMBOL(clk_set_rate); +int clk_set_parent(struct clk *clk, struct clk *parent) +{ + unsigned long flags; + + if (clk == NULL || IS_ERR(clk)) + return -EINVAL; + + /* Cannot change parent on enabled clock */ + if (WARN_ON(clk->usecount)) + return -EINVAL; + + mutex_lock(&clocks_mutex); + clk->parent = parent; + list_del_init(&clk->childnode); + list_add(&clk->childnode, &clk->parent->children); + mutex_unlock(&clocks_mutex); + + spin_lock_irqsave(&clockfw_lock, flags); + if (clk->recalc) + clk->rate = clk->recalc(clk); + propagate_rate(clk); + spin_unlock_irqrestore(&clockfw_lock, flags); + + return 0; +} +EXPORT_SYMBOL(clk_set_parent); + int clk_register(struct clk *clk) { if (clk == NULL || IS_ERR(clk)) @@ -123,16 +175,24 @@ int clk_register(struct clk *clk) clk->name, clk->parent->name)) return -EINVAL; + INIT_LIST_HEAD(&clk->children); + mutex_lock(&clocks_mutex); list_add_tail(&clk->node, &clocks); + if (clk->parent) + list_add_tail(&clk->childnode, &clk->parent->children); mutex_unlock(&clocks_mutex); /* If rate is already set, use it */ if (clk->rate) return 0; + /* Else, see if there is a way to calculate it */ + if (clk->recalc) + clk->rate = clk->recalc(clk); + /* Otherwise, default to parent rate */ - if (clk->parent) + else if (clk->parent) clk->rate = clk->parent->rate; return 0; @@ -146,6 +206,7 @@ void clk_unregister(struct clk *clk) mutex_lock(&clocks_mutex); list_del(&clk->node); + list_del(&clk->childnode); mutex_unlock(&clocks_mutex); } EXPORT_SYMBOL(clk_unregister); @@ -166,11 +227,11 @@ static int __init clk_disable_unused(void) continue; /* ignore if in Disabled or SwRstDisable states */ - if (!davinci_psc_is_clk_active(ck->psc_ctlr, ck->lpsc)) + if (!davinci_psc_is_clk_active(ck->gpsc, ck->lpsc)) continue; pr_info("Clocks: disable unused %s\n", ck->name); - davinci_psc_config(psc_domain(ck), ck->psc_ctlr, ck->lpsc, 0); + davinci_psc_config(psc_domain(ck), ck->gpsc, ck->lpsc, 0); } spin_unlock_irq(&clockfw_lock); @@ -179,50 +240,62 @@ static int __init clk_disable_unused(void) late_initcall(clk_disable_unused); #endif -static void clk_sysclk_recalc(struct clk *clk) +static unsigned long clk_sysclk_recalc(struct clk *clk) { u32 v, plldiv; struct pll_data *pll; + unsigned long rate = clk->rate; /* If this is the PLL base clock, no more calculations needed */ if (clk->pll_data) - return; + return rate; if (WARN_ON(!clk->parent)) - return; + return rate; - clk->rate = clk->parent->rate; + rate = clk->parent->rate; /* Otherwise, the parent must be a PLL */ if (WARN_ON(!clk->parent->pll_data)) - return; + return rate; pll = clk->parent->pll_data; /* If pre-PLL, source clock is before the multiplier and divider(s) */ if (clk->flags & PRE_PLL) - clk->rate = pll->input_rate; + rate = pll->input_rate; if (!clk->div_reg) - return; + return rate; v = __raw_readl(pll->base + clk->div_reg); if (v & PLLDIV_EN) { plldiv = (v & PLLDIV_RATIO_MASK) + 1; if (plldiv) - clk->rate /= plldiv; + rate /= plldiv; } + + return rate; +} + +static unsigned long clk_leafclk_recalc(struct clk *clk) +{ + if (WARN_ON(!clk->parent)) + return clk->rate; + + return clk->parent->rate; } -static void __init clk_pll_init(struct clk *clk) +static unsigned long clk_pllclk_recalc(struct clk *clk) { u32 ctrl, mult = 1, prediv = 1, postdiv = 1; u8 bypass; struct pll_data *pll = clk->pll_data; + unsigned long rate = clk->rate; pll->base = IO_ADDRESS(pll->phys_base); ctrl = __raw_readl(pll->base + PLLCTL); - clk->rate = pll->input_rate = clk->parent->rate; + rate = pll->input_rate = clk->parent->rate; if (ctrl & PLLCTL_PLLEN) { bypass = 0; @@ -255,9 +328,9 @@ static void __init clk_pll_init(struct clk *clk) } if (!bypass) { - clk->rate /= prediv; - clk->rate *= mult; - clk->rate /= postdiv; + rate /= prediv; + rate *= mult; + rate /= postdiv; } pr_debug("PLL%d: input = %lu MHz [ ", @@ -270,8 +343,90 @@ static void __init clk_pll_init(struct clk *clk) pr_debug("* %d ", mult); if (postdiv > 1) pr_debug("/ %d ", postdiv); - pr_debug("] --> %lu MHz output.\n", clk->rate / 1000000); + pr_debug("] --> %lu MHz output.\n", rate / 1000000); + + return rate; +} + +/** + * davinci_set_pllrate - set the output rate of a given PLL. + * + * Note: Currently tested to work with OMAP-L138 only. + * + * @pll: pll whose rate needs to be changed. + * @prediv: The pre divider value. Passing 0 disables the pre-divider. + * @pllm: The multiplier value. Passing 0 leads to multiply-by-one. + * @postdiv: The post divider value. Passing 0 disables the post-divider. + */ +int davinci_set_pllrate(struct pll_data *pll, unsigned int prediv, + unsigned int mult, unsigned int postdiv) +{ + u32 ctrl; + unsigned int locktime; + + if (pll->base == NULL) + return -EINVAL; + + /* + * PLL lock time required per OMAP-L138 datasheet is + * (2000 * prediv)/sqrt(pllm) OSCIN cycles. We approximate sqrt(pllm) + * as 4 and OSCIN cycle as 25 MHz. + */ + if (prediv) { + locktime = ((2000 * prediv) / 100); + prediv = (prediv - 1) | PLLDIV_EN; + } else { + locktime = 20; + } + if (postdiv) + postdiv = (postdiv - 1) | PLLDIV_EN; + if (mult) + mult = mult - 1; + + ctrl = __raw_readl(pll->base + PLLCTL); + + /* Switch the PLL to bypass mode */ + ctrl &= ~(PLLCTL_PLLENSRC | PLLCTL_PLLEN); + __raw_writel(ctrl, pll->base + PLLCTL); + + /* + * Wait for 4 OSCIN/CLKIN cycles to ensure that the PLLC has switched + * to bypass mode. Delay of 1us ensures we are good for all > 4MHz + * OSCIN/CLKIN inputs. Typically the input is ~25MHz. + */ + udelay(1); + + /* Reset and enable PLL */ + ctrl &= ~(PLLCTL_PLLRST | PLLCTL_PLLDIS); + __raw_writel(ctrl, pll->base + PLLCTL); + + if (pll->flags & PLL_HAS_PREDIV) + __raw_writel(prediv, pll->base + PREDIV); + + __raw_writel(mult, pll->base + PLLM); + + if (pll->flags & PLL_HAS_POSTDIV) + __raw_writel(postdiv, pll->base + POSTDIV); + + /* + * Wait for PLL to reset properly, OMAP-L138 datasheet says + * 'min' time = 125ns + */ + udelay(1); + + /* Bring PLL out of reset */ + ctrl |= PLLCTL_PLLRST; + __raw_writel(ctrl, pll->base + PLLCTL); + + udelay(locktime); + + /* Remove PLL from bypass mode */ + ctrl |= PLLCTL_PLLEN; + __raw_writel(ctrl, pll->base + PLLCTL); + + return 0; } +EXPORT_SYMBOL(davinci_set_pllrate); int __init davinci_clk_init(struct davinci_clk *clocks) { @@ -281,12 +436,23 @@ int __init davinci_clk_init(struct davinci_clk *clocks) for (c = clocks; c->lk.clk; c++) { clk = c->lk.clk; - if (clk->pll_data) - clk_pll_init(clk); + if (!clk->recalc) { + + /* Check if clock is a PLL */ + if (clk->pll_data) + clk->recalc = clk_pllclk_recalc; + + /* Else, if it is a PLL-derived clock */ + else if (clk->flags & CLK_PLL) + clk->recalc = clk_sysclk_recalc; + + /* Otherwise, it is a leaf clock (PSC clock) */ + else if (clk->parent) + clk->recalc = clk_leafclk_recalc; + } - /* Calculate rates for PLL-derived clocks */ - else if (clk->flags & CLK_PLL) - clk_sysclk_recalc(clk); + if (clk->recalc) + clk->rate = clk->recalc(clk); if (clk->lpsc) clk->flags |= CLK_PSC; @@ -352,9 +518,8 @@ dump_clock(struct seq_file *s, unsigned nest, struct clk *parent) /* REVISIT show device associations too */ /* cost is now small, but not linear... */ - list_for_each_entry(clk, &clocks, node) { - if (clk->parent == parent) - dump_clock(s, nest + NEST_DELTA, clk); + list_for_each_entry(clk, &parent->children, childnode) { + dump_clock(s, nest + NEST_DELTA, clk); } } diff --git a/arch/arm/mach-davinci/clock.h b/arch/arm/mach-davinci/clock.h index 27233cb4a2f..c92d77a3008 100644 --- a/arch/arm/mach-davinci/clock.h +++ b/arch/arm/mach-davinci/clock.h @@ -22,6 +22,10 @@ /* PLL/Reset register offsets */ #define PLLCTL 0x100 #define PLLCTL_PLLEN BIT(0) +#define PLLCTL_PLLPWRDN BIT(1) +#define PLLCTL_PLLRST BIT(3) +#define PLLCTL_PLLDIS BIT(4) +#define PLLCTL_PLLENSRC BIT(5) #define PLLCTL_CLKMODE BIT(8) #define PLLM 0x110 @@ -65,15 +69,20 @@ struct clk { const char *name; unsigned long rate; u8 usecount; - u8 flags; u8 lpsc; - u8 psc_ctlr; + u8 gpsc; + u32 flags; struct clk *parent; + struct list_head children; /* list of children */ + struct list_head childnode; /* parent's child list node */ struct pll_data *pll_data; u32 div_reg; + unsigned long (*recalc) (struct clk *); + int (*set_rate) (struct clk *clk, unsigned long rate); + int (*round_rate) (struct clk *clk, unsigned long rate); }; -/* Clock flags */ +/* Clock flags: SoC-specific flags start at BIT(16) */ #define ALWAYS_ENABLED BIT(1) #define CLK_PSC BIT(2) #define PSC_DSP BIT(3) /* PSC uses DSP domain, not ARM */ @@ -94,6 +103,8 @@ struct davinci_clk { } int davinci_clk_init(struct davinci_clk *clocks); +int davinci_set_pllrate(struct pll_data *pll, unsigned int prediv, + unsigned int mult, unsigned int postdiv); extern struct platform_device davinci_wdt_device; diff --git a/arch/arm/mach-davinci/common.c b/arch/arm/mach-davinci/common.c index 61ede19c6b5..c2de94cde56 100644 --- a/arch/arm/mach-davinci/common.c +++ b/arch/arm/mach-davinci/common.c @@ -86,6 +86,8 @@ void __init davinci_common_init(struct davinci_soc_info *soc_info) dip = davinci_get_id(davinci_soc_info.jtag_id); if (!dip) { ret = -EINVAL; + pr_err("Unknown DaVinci JTAG ID 0x%x\n", + davinci_soc_info.jtag_id); goto err; } @@ -104,5 +106,5 @@ void __init davinci_common_init(struct davinci_soc_info *soc_info) return; err: - pr_err("davinci_common_init: SoC Initialization failed\n"); + panic("davinci_common_init: SoC Initialization failed\n"); } diff --git a/arch/arm/mach-davinci/cp_intc.c b/arch/arm/mach-davinci/cp_intc.c index 96c8e97a7de..52b287cf3a4 100644 --- a/arch/arm/mach-davinci/cp_intc.c +++ b/arch/arm/mach-davinci/cp_intc.c @@ -10,9 +10,6 @@ */ #include <linux/init.h> -#include <linux/sched.h> -#include <linux/interrupt.h> -#include <linux/kernel.h> #include <linux/irq.h> #include <linux/io.h> diff --git a/arch/arm/mach-davinci/cpufreq.c b/arch/arm/mach-davinci/cpufreq.c new file mode 100644 index 00000000000..d3fa6de1e20 --- /dev/null +++ b/arch/arm/mach-davinci/cpufreq.c @@ -0,0 +1,226 @@ +/* + * CPU frequency scaling for DaVinci + * + * Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/ + * + * Based on linux/arch/arm/plat-omap/cpu-omap.c. Original Copyright follows: + * + * Copyright (C) 2005 Nokia Corporation + * Written by Tony Lindgren <tony@atomide.com> + * + * Based on cpu-sa1110.c, Copyright (C) 2001 Russell King + * + * Copyright (C) 2007-2008 Texas Instruments, Inc. + * Updated to support OMAP3 + * Rajendra Nayak <rnayak@ti.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/types.h> +#include <linux/cpufreq.h> +#include <linux/init.h> +#include <linux/err.h> +#include <linux/clk.h> +#include <linux/platform_device.h> + +#include <mach/hardware.h> +#include <mach/cpufreq.h> +#include <mach/common.h> + +#include "clock.h" + +struct davinci_cpufreq { + struct device *dev; + struct clk *armclk; +}; +static struct davinci_cpufreq cpufreq; + +static int davinci_verify_speed(struct cpufreq_policy *policy) +{ + struct davinci_cpufreq_config *pdata = cpufreq.dev->platform_data; + struct cpufreq_frequency_table *freq_table = pdata->freq_table; + struct clk *armclk = cpufreq.armclk; + + if (freq_table) + return cpufreq_frequency_table_verify(policy, freq_table); + + if (policy->cpu) + return -EINVAL; + + cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq, + policy->cpuinfo.max_freq); + + policy->min = clk_round_rate(armclk, policy->min * 1000) / 1000; + policy->max = clk_round_rate(armclk, policy->max * 1000) / 1000; + cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq, + policy->cpuinfo.max_freq); + return 0; +} + +static unsigned int davinci_getspeed(unsigned int cpu) +{ + if (cpu) + return 0; + + return clk_get_rate(cpufreq.armclk) / 1000; +} + +static int davinci_target(struct cpufreq_policy *policy, + unsigned int target_freq, unsigned int relation) +{ + int ret = 0; + unsigned int idx; + struct cpufreq_freqs freqs; + struct davinci_cpufreq_config *pdata = cpufreq.dev->platform_data; + struct clk *armclk = cpufreq.armclk; + + /* + * Ensure desired rate is within allowed range. Some govenors + * (ondemand) will just pass target_freq=0 to get the minimum. + */ + if (target_freq < policy->cpuinfo.min_freq) + target_freq = policy->cpuinfo.min_freq; + if (target_freq > policy->cpuinfo.max_freq) + target_freq = policy->cpuinfo.max_freq; + + freqs.old = davinci_getspeed(0); + freqs.new = clk_round_rate(armclk, target_freq * 1000) / 1000; + freqs.cpu = 0; + + if (freqs.old == freqs.new) + return ret; + + cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, + dev_driver_string(cpufreq.dev), + "transition: %u --> %u\n", freqs.old, freqs.new); + + ret = cpufreq_frequency_table_target(policy, pdata->freq_table, + freqs.new, relation, &idx); + if (ret) + return -EINVAL; + + cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); + + /* if moving to higher frequency, up the voltage beforehand */ + if (pdata->set_voltage && freqs.new > freqs.old) + pdata->set_voltage(idx); + + ret = clk_set_rate(armclk, idx); + + /* if moving to lower freq, lower the voltage after lowering freq */ + if (pdata->set_voltage && freqs.new < freqs.old) + pdata->set_voltage(idx); + + cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); + + return ret; +} + +static int __init davinci_cpu_init(struct cpufreq_policy *policy) +{ + int result = 0; + struct davinci_cpufreq_config *pdata = cpufreq.dev->platform_data; + struct cpufreq_frequency_table *freq_table = pdata->freq_table; + + if (policy->cpu != 0) + return -EINVAL; + + /* Finish platform specific initialization */ + if (pdata->init) { + result = pdata->init(); + if (result) + return result; + } + + policy->cur = policy->min = policy->max = davinci_getspeed(0); + + if (freq_table) { + result = cpufreq_frequency_table_cpuinfo(policy, freq_table); + if (!result) + cpufreq_frequency_table_get_attr(freq_table, + policy->cpu); + } else { + policy->cpuinfo.min_freq = policy->min; + policy->cpuinfo.max_freq = policy->max; + } + + policy->min = policy->cpuinfo.min_freq; + policy->max = policy->cpuinfo.max_freq; + policy->cur = davinci_getspeed(0); + + /* + * Time measurement across the target() function yields ~1500-1800us + * time taken with no drivers on notification list. + * Setting the latency to 2000 us to accomodate addition of drivers + * to pre/post change notification list. + */ + policy->cpuinfo.transition_latency = 2000 * 1000; + return 0; +} + +static int davinci_cpu_exit(struct cpufreq_policy *policy) +{ + cpufreq_frequency_table_put_attr(policy->cpu); + return 0; +} + +static struct freq_attr *davinci_cpufreq_attr[] = { + &cpufreq_freq_attr_scaling_available_freqs, + NULL, +}; + +static struct cpufreq_driver davinci_driver = { + .flags = CPUFREQ_STICKY, + .verify = davinci_verify_speed, + .target = davinci_target, + .get = davinci_getspeed, + .init = davinci_cpu_init, + .exit = davinci_cpu_exit, + .name = "davinci", + .attr = davinci_cpufreq_attr, +}; + +static int __init davinci_cpufreq_probe(struct platform_device *pdev) +{ + struct davinci_cpufreq_config *pdata = pdev->dev.platform_data; + + if (!pdata) + return -EINVAL; + if (!pdata->freq_table) + return -EINVAL; + + cpufreq.dev = &pdev->dev; + + cpufreq.armclk = clk_get(NULL, "arm"); + if (IS_ERR(cpufreq.armclk)) { + dev_err(cpufreq.dev, "Unable to get ARM clock\n"); + return PTR_ERR(cpufreq.armclk); + } + + return cpufreq_register_driver(&davinci_driver); +} + +static int __exit davinci_cpufreq_remove(struct platform_device *pdev) +{ + clk_put(cpufreq.armclk); + + return cpufreq_unregister_driver(&davinci_driver); +} + +static struct platform_driver davinci_cpufreq_driver = { + .driver = { + .name = "cpufreq-davinci", + .owner = THIS_MODULE, + }, + .remove = __exit_p(davinci_cpufreq_remove), +}; + +static int __init davinci_cpufreq_init(void) +{ + return platform_driver_probe(&davinci_cpufreq_driver, + davinci_cpufreq_probe); +} +late_initcall(davinci_cpufreq_init); + diff --git a/arch/arm/mach-davinci/cpuidle.c b/arch/arm/mach-davinci/cpuidle.c new file mode 100644 index 00000000000..97a90f36fc9 --- /dev/null +++ b/arch/arm/mach-davinci/cpuidle.c @@ -0,0 +1,197 @@ +/* + * CPU idle for DaVinci SoCs + * + * Copyright (C) 2009 Texas Instruments Incorporated. http://www.ti.com/ + * + * Derived from Marvell Kirkwood CPU idle code + * (arch/arm/mach-kirkwood/cpuidle.c) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/cpuidle.h> +#include <linux/io.h> +#include <asm/proc-fns.h> + +#include <mach/cpuidle.h> + +#define DAVINCI_CPUIDLE_MAX_STATES 2 + +struct davinci_ops { + void (*enter) (u32 flags); + void (*exit) (u32 flags); + u32 flags; +}; + +/* fields in davinci_ops.flags */ +#define DAVINCI_CPUIDLE_FLAGS_DDR2_PWDN BIT(0) + +static struct cpuidle_driver davinci_idle_driver = { + .name = "cpuidle-davinci", + .owner = THIS_MODULE, +}; + +static DEFINE_PER_CPU(struct cpuidle_device, davinci_cpuidle_device); +static void __iomem *ddr2_reg_base; + +#define DDR2_SDRCR_OFFSET 0xc +#define DDR2_SRPD_BIT BIT(23) +#define DDR2_LPMODEN_BIT BIT(31) + +static void davinci_save_ddr_power(int enter, bool pdown) +{ + u32 val; + + val = __raw_readl(ddr2_reg_base + DDR2_SDRCR_OFFSET); + + if (enter) { + if (pdown) + val |= DDR2_SRPD_BIT; + else + val &= ~DDR2_SRPD_BIT; + val |= DDR2_LPMODEN_BIT; + } else { + val &= ~(DDR2_SRPD_BIT | DDR2_LPMODEN_BIT); + } + + __raw_writel(val, ddr2_reg_base + DDR2_SDRCR_OFFSET); +} + +static void davinci_c2state_enter(u32 flags) +{ + davinci_save_ddr_power(1, !!(flags & DAVINCI_CPUIDLE_FLAGS_DDR2_PWDN)); +} + +static void davinci_c2state_exit(u32 flags) +{ + davinci_save_ddr_power(0, !!(flags & DAVINCI_CPUIDLE_FLAGS_DDR2_PWDN)); +} + +static struct davinci_ops davinci_states[DAVINCI_CPUIDLE_MAX_STATES] = { + [1] = { + .enter = davinci_c2state_enter, + .exit = davinci_c2state_exit, + }, +}; + +/* Actual code that puts the SoC in different idle states */ +static int davinci_enter_idle(struct cpuidle_device *dev, + struct cpuidle_state *state) +{ + struct davinci_ops *ops = cpuidle_get_statedata(state); + struct timeval before, after; + int idle_time; + + local_irq_disable(); + do_gettimeofday(&before); + + if (ops && ops->enter) + ops->enter(ops->flags); + /* Wait for interrupt state */ + cpu_do_idle(); + if (ops && ops->exit) + ops->exit(ops->flags); + + do_gettimeofday(&after); + local_irq_enable(); + idle_time = (after.tv_sec - before.tv_sec) * USEC_PER_SEC + + (after.tv_usec - before.tv_usec); + return idle_time; +} + +static int __init davinci_cpuidle_probe(struct platform_device *pdev) +{ + int ret; + struct cpuidle_device *device; + struct davinci_cpuidle_config *pdata = pdev->dev.platform_data; + struct resource *ddr2_regs; + resource_size_t len; + + device = &per_cpu(davinci_cpuidle_device, smp_processor_id()); + + if (!pdata) { + dev_err(&pdev->dev, "cannot get platform data\n"); + return -ENOENT; + } + + ddr2_regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!ddr2_regs) { + dev_err(&pdev->dev, "cannot get DDR2 controller register base"); + return -ENODEV; + } + + len = resource_size(ddr2_regs); + + ddr2_regs = request_mem_region(ddr2_regs->start, len, ddr2_regs->name); + if (!ddr2_regs) + return -EBUSY; + + ddr2_reg_base = ioremap(ddr2_regs->start, len); + if (!ddr2_reg_base) { + ret = -ENOMEM; + goto ioremap_fail; + } + + ret = cpuidle_register_driver(&davinci_idle_driver); + if (ret) { + dev_err(&pdev->dev, "failed to register driver\n"); + goto driver_register_fail; + } + + /* Wait for interrupt state */ + device->states[0].enter = davinci_enter_idle; + device->states[0].exit_latency = 1; + device->states[0].target_residency = 10000; + device->states[0].flags = CPUIDLE_FLAG_TIME_VALID; + strcpy(device->states[0].name, "WFI"); + strcpy(device->states[0].desc, "Wait for interrupt"); + + /* Wait for interrupt and DDR self refresh state */ + device->states[1].enter = davinci_enter_idle; + device->states[1].exit_latency = 10; + device->states[1].target_residency = 10000; + device->states[1].flags = CPUIDLE_FLAG_TIME_VALID; + strcpy(device->states[1].name, "DDR SR"); + strcpy(device->states[1].desc, "WFI and DDR Self Refresh"); + if (pdata->ddr2_pdown) + davinci_states[1].flags |= DAVINCI_CPUIDLE_FLAGS_DDR2_PWDN; + cpuidle_set_statedata(&device->states[1], &davinci_states[1]); + + device->state_count = DAVINCI_CPUIDLE_MAX_STATES; + + ret = cpuidle_register_device(device); + if (ret) { + dev_err(&pdev->dev, "failed to register device\n"); + goto device_register_fail; + } + + return 0; + +device_register_fail: + cpuidle_unregister_driver(&davinci_idle_driver); +driver_register_fail: + iounmap(ddr2_reg_base); +ioremap_fail: + release_mem_region(ddr2_regs->start, len); + return ret; +} + +static struct platform_driver davinci_cpuidle_driver = { + .driver = { + .name = "cpuidle-davinci", + .owner = THIS_MODULE, + }, +}; + +static int __init davinci_cpuidle_init(void) +{ + return platform_driver_probe(&davinci_cpuidle_driver, + davinci_cpuidle_probe); +} +device_initcall(davinci_cpuidle_init); + diff --git a/arch/arm/mach-davinci/da830.c b/arch/arm/mach-davinci/da830.c index 19b2748357f..b22b5cf0425 100644 --- a/arch/arm/mach-davinci/da830.c +++ b/arch/arm/mach-davinci/da830.c @@ -8,22 +8,17 @@ * is licensed "as is" without any warranty of any kind, whether express * or implied. */ -#include <linux/kernel.h> #include <linux/init.h> #include <linux/clk.h> -#include <linux/platform_device.h> #include <asm/mach/map.h> -#include <mach/clock.h> #include <mach/psc.h> -#include <mach/mux.h> #include <mach/irqs.h> #include <mach/cputype.h> #include <mach/common.h> #include <mach/time.h> #include <mach/da8xx.h> -#include <mach/asp.h> #include "clock.h" #include "mux.h" @@ -193,14 +188,14 @@ static struct clk uart1_clk = { .name = "uart1", .parent = &pll0_sysclk2, .lpsc = DA8XX_LPSC1_UART1, - .psc_ctlr = 1, + .gpsc = 1, }; static struct clk uart2_clk = { .name = "uart2", .parent = &pll0_sysclk2, .lpsc = DA8XX_LPSC1_UART2, - .psc_ctlr = 1, + .gpsc = 1, }; static struct clk spi0_clk = { @@ -213,98 +208,98 @@ static struct clk spi1_clk = { .name = "spi1", .parent = &pll0_sysclk2, .lpsc = DA8XX_LPSC1_SPI1, - .psc_ctlr = 1, + .gpsc = 1, }; static struct clk ecap0_clk = { .name = "ecap0", .parent = &pll0_sysclk2, .lpsc = DA8XX_LPSC1_ECAP, - .psc_ctlr = 1, + .gpsc = 1, }; static struct clk ecap1_clk = { .name = "ecap1", .parent = &pll0_sysclk2, .lpsc = DA8XX_LPSC1_ECAP, - .psc_ctlr = 1, + .gpsc = 1, }; static struct clk ecap2_clk = { .name = "ecap2", .parent = &pll0_sysclk2, .lpsc = DA8XX_LPSC1_ECAP, - .psc_ctlr = 1, + .gpsc = 1, }; static struct clk pwm0_clk = { .name = "pwm0", .parent = &pll0_sysclk2, .lpsc = DA8XX_LPSC1_PWM, - .psc_ctlr = 1, + .gpsc = 1, }; static struct clk pwm1_clk = { .name = "pwm1", .parent = &pll0_sysclk2, .lpsc = DA8XX_LPSC1_PWM, - .psc_ctlr = 1, + .gpsc = 1, }; static struct clk pwm2_clk = { .name = "pwm2", .parent = &pll0_sysclk2, .lpsc = DA8XX_LPSC1_PWM, - .psc_ctlr = 1, + .gpsc = 1, }; static struct clk eqep0_clk = { .name = "eqep0", .parent = &pll0_sysclk2, .lpsc = DA830_LPSC1_EQEP, - .psc_ctlr = 1, + .gpsc = 1, }; static struct clk eqep1_clk = { .name = "eqep1", .parent = &pll0_sysclk2, .lpsc = DA830_LPSC1_EQEP, - .psc_ctlr = 1, + .gpsc = 1, }; static struct clk lcdc_clk = { .name = "lcdc", .parent = &pll0_sysclk2, .lpsc = DA8XX_LPSC1_LCDC, - .psc_ctlr = 1, + .gpsc = 1, }; static struct clk mcasp0_clk = { .name = "mcasp0", .parent = &pll0_sysclk2, .lpsc = DA8XX_LPSC1_McASP0, - .psc_ctlr = 1, + .gpsc = 1, }; static struct clk mcasp1_clk = { .name = "mcasp1", .parent = &pll0_sysclk2, .lpsc = DA830_LPSC1_McASP1, - .psc_ctlr = 1, + .gpsc = 1, }; static struct clk mcasp2_clk = { .name = "mcasp2", .parent = &pll0_sysclk2, .lpsc = DA830_LPSC1_McASP2, - .psc_ctlr = 1, + .gpsc = 1, }; static struct clk usb20_clk = { .name = "usb20", .parent = &pll0_sysclk2, .lpsc = DA8XX_LPSC1_USB20, - .psc_ctlr = 1, + .gpsc = 1, }; static struct clk aemif_clk = { @@ -332,36 +327,36 @@ static struct clk emac_clk = { .name = "emac", .parent = &pll0_sysclk4, .lpsc = DA8XX_LPSC1_CPGMAC, - .psc_ctlr = 1, + .gpsc = 1, }; static struct clk gpio_clk = { .name = "gpio", .parent = &pll0_sysclk4, .lpsc = DA8XX_LPSC1_GPIO, - .psc_ctlr = 1, + .gpsc = 1, }; static struct clk i2c1_clk = { .name = "i2c1", .parent = &pll0_sysclk4, .lpsc = DA8XX_LPSC1_I2C, - .psc_ctlr = 1, + .gpsc = 1, }; static struct clk usb11_clk = { .name = "usb11", .parent = &pll0_sysclk4, .lpsc = DA8XX_LPSC1_USB11, - .psc_ctlr = 1, + .gpsc = 1, }; static struct clk emif3_clk = { .name = "emif3", .parent = &pll0_sysclk5, .lpsc = DA8XX_LPSC1_EMIF3C, + .gpsc = 1, .flags = ALWAYS_ENABLED, - .psc_ctlr = 1, }; static struct clk arm_clk = { @@ -411,7 +406,7 @@ static struct davinci_clk da830_clks[] = { CLK(NULL, "pwm2", &pwm2_clk), CLK("eqep.0", NULL, &eqep0_clk), CLK("eqep.1", NULL, &eqep1_clk), - CLK("da830_lcdc", NULL, &lcdc_clk), + CLK("da8xx_lcdc.0", NULL, &lcdc_clk), CLK("davinci-mcasp.0", NULL, &mcasp0_clk), CLK("davinci-mcasp.1", NULL, &mcasp1_clk), CLK("davinci-mcasp.2", NULL, &mcasp2_clk), @@ -1143,7 +1138,21 @@ static struct davinci_id da830_ids[] = { .part_no = 0xb7df, .manufacturer = 0x017, /* 0x02f >> 1 */ .cpu_id = DAVINCI_CPU_ID_DA830, - .name = "da830/omap l137", + .name = "da830/omap-l137 rev1.0", + }, + { + .variant = 0x8, + .part_no = 0xb7df, + .manufacturer = 0x017, + .cpu_id = DAVINCI_CPU_ID_DA830, + .name = "da830/omap-l137 rev1.1", + }, + { + .variant = 0x9, + .part_no = 0xb7df, + .manufacturer = 0x017, + .cpu_id = DAVINCI_CPU_ID_DA830, + .name = "da830/omap-l137 rev2.0", }, }; @@ -1178,13 +1187,11 @@ static struct davinci_timer_info da830_timer_info = { static struct davinci_soc_info davinci_soc_info_da830 = { .io_desc = da830_io_desc, .io_desc_num = ARRAY_SIZE(da830_io_desc), - .jtag_id_base = IO_ADDRESS(DA8XX_JTAG_ID_REG), .ids = da830_ids, .ids_num = ARRAY_SIZE(da830_ids), .cpu_clks = da830_clks, .psc_bases = da830_psc_bases, .psc_bases_num = ARRAY_SIZE(da830_psc_bases), - .pinmux_base = IO_ADDRESS(DA8XX_BOOT_CFG_BASE + 0x120), .pinmux_pins = da830_pins, .pinmux_pins_num = ARRAY_SIZE(da830_pins), .intc_base = (void __iomem *)DA8XX_CP_INTC_VIRT, @@ -1201,5 +1208,13 @@ static struct davinci_soc_info davinci_soc_info_da830 = { void __init da830_init(void) { + da8xx_syscfg_base = ioremap(DA8XX_SYSCFG_BASE, SZ_4K); + if (WARN(!da8xx_syscfg_base, "Unable to map syscfg module")) + return; + + davinci_soc_info_da830.jtag_id_base = + DA8XX_SYSCFG_VIRT(DA8XX_JTAG_ID_REG); + davinci_soc_info_da830.pinmux_base = DA8XX_SYSCFG_VIRT(0x120); + davinci_common_init(&davinci_soc_info_da830); } diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c index 192d719a47d..717806c6cef 100644 --- a/arch/arm/mach-davinci/da850.c +++ b/arch/arm/mach-davinci/da850.c @@ -11,31 +11,41 @@ * is licensed "as is" without any warranty of any kind, whether express * or implied. */ -#include <linux/kernel.h> #include <linux/init.h> #include <linux/clk.h> #include <linux/platform_device.h> +#include <linux/cpufreq.h> +#include <linux/regulator/consumer.h> #include <asm/mach/map.h> -#include <mach/clock.h> #include <mach/psc.h> -#include <mach/mux.h> #include <mach/irqs.h> #include <mach/cputype.h> #include <mach/common.h> #include <mach/time.h> #include <mach/da8xx.h> +#include <mach/cpufreq.h> #include "clock.h" #include "mux.h" +/* SoC specific clock flags */ +#define DA850_CLK_ASYNC3 BIT(16) + #define DA850_PLL1_BASE 0x01e1a000 #define DA850_TIMER64P2_BASE 0x01f0c000 #define DA850_TIMER64P3_BASE 0x01f0d000 #define DA850_REF_FREQ 24000000 +#define CFGCHIP3_ASYNC3_CLKSRC BIT(4) +#define CFGCHIP0_PLL_MASTER_LOCK BIT(4) + +static int da850_set_armrate(struct clk *clk, unsigned long rate); +static int da850_round_armrate(struct clk *clk, unsigned long rate); +static int da850_set_pll0rate(struct clk *clk, unsigned long armrate); + static struct pll_data pll0_data = { .num = 1, .phys_base = DA8XX_PLL0_BASE, @@ -52,6 +62,7 @@ static struct clk pll0_clk = { .parent = &ref_clk, .pll_data = &pll0_data, .flags = CLK_PLL, + .set_rate = da850_set_pll0rate, }; static struct clk pll0_aux_clk = { @@ -210,16 +221,16 @@ static struct clk tpcc1_clk = { .name = "tpcc1", .parent = &pll0_sysclk2, .lpsc = DA850_LPSC1_TPCC1, + .gpsc = 1, .flags = CLK_PSC | ALWAYS_ENABLED, - .psc_ctlr = 1, }; static struct clk tptc2_clk = { .name = "tptc2", .parent = &pll0_sysclk2, .lpsc = DA850_LPSC1_TPTC2, + .gpsc = 1, .flags = ALWAYS_ENABLED, - .psc_ctlr = 1, }; static struct clk uart0_clk = { @@ -232,14 +243,16 @@ static struct clk uart1_clk = { .name = "uart1", .parent = &pll0_sysclk2, .lpsc = DA8XX_LPSC1_UART1, - .psc_ctlr = 1, + .gpsc = 1, + .flags = DA850_CLK_ASYNC3, }; static struct clk uart2_clk = { .name = "uart2", .parent = &pll0_sysclk2, .lpsc = DA8XX_LPSC1_UART2, - .psc_ctlr = 1, + .gpsc = 1, + .flags = DA850_CLK_ASYNC3, }; static struct clk aintc_clk = { @@ -253,22 +266,22 @@ static struct clk gpio_clk = { .name = "gpio", .parent = &pll0_sysclk4, .lpsc = DA8XX_LPSC1_GPIO, - .psc_ctlr = 1, + .gpsc = 1, }; static struct clk i2c1_clk = { .name = "i2c1", .parent = &pll0_sysclk4, .lpsc = DA8XX_LPSC1_I2C, - .psc_ctlr = 1, + .gpsc = 1, }; static struct clk emif3_clk = { .name = "emif3", .parent = &pll0_sysclk5, .lpsc = DA8XX_LPSC1_EMIF3C, + .gpsc = 1, .flags = ALWAYS_ENABLED, - .psc_ctlr = 1, }; static struct clk arm_clk = { @@ -276,6 +289,8 @@ static struct clk arm_clk = { .parent = &pll0_sysclk6, .lpsc = DA8XX_LPSC0_ARM, .flags = ALWAYS_ENABLED, + .set_rate = da850_set_armrate, + .round_rate = da850_round_armrate, }; static struct clk rmii_clk = { @@ -287,21 +302,22 @@ static struct clk emac_clk = { .name = "emac", .parent = &pll0_sysclk4, .lpsc = DA8XX_LPSC1_CPGMAC, - .psc_ctlr = 1, + .gpsc = 1, }; static struct clk mcasp_clk = { .name = "mcasp", .parent = &pll0_sysclk2, .lpsc = DA8XX_LPSC1_McASP0, - .psc_ctlr = 1, + .gpsc = 1, + .flags = DA850_CLK_ASYNC3, }; static struct clk lcdc_clk = { .name = "lcdc", .parent = &pll0_sysclk2, .lpsc = DA8XX_LPSC1_LCDC, - .psc_ctlr = 1, + .gpsc = 1, }; static struct clk mmcsd_clk = { @@ -404,6 +420,14 @@ static const struct mux_config da850_pins[] = { MUX_CFG(DA850, MII_RXD_0, 3, 28, 15, 8, false) MUX_CFG(DA850, MDIO_CLK, 4, 0, 15, 8, false) MUX_CFG(DA850, MDIO_D, 4, 4, 15, 8, false) + MUX_CFG(DA850, RMII_TXD_0, 14, 12, 15, 8, false) + MUX_CFG(DA850, RMII_TXD_1, 14, 8, 15, 8, false) + MUX_CFG(DA850, RMII_TXEN, 14, 16, 15, 8, false) + MUX_CFG(DA850, RMII_CRS_DV, 15, 4, 15, 8, false) + MUX_CFG(DA850, RMII_RXD_0, 14, 24, 15, 8, false) + MUX_CFG(DA850, RMII_RXD_1, 14, 20, 15, 8, false) + MUX_CFG(DA850, RMII_RXER, 14, 28, 15, 8, false) + MUX_CFG(DA850, RMII_MHZ_50_CLK, 15, 0, 15, 0, false) /* McASP function */ MUX_CFG(DA850, ACLKR, 0, 0, 15, 1, false) MUX_CFG(DA850, ACLKX, 0, 4, 15, 1, false) @@ -506,8 +530,9 @@ static const struct mux_config da850_pins[] = { MUX_CFG(DA850, EMA_WAIT_1, 6, 24, 15, 1, false) MUX_CFG(DA850, NEMA_CS_2, 7, 0, 15, 1, false) /* GPIO function */ + MUX_CFG(DA850, GPIO2_6, 6, 4, 15, 8, false) + MUX_CFG(DA850, GPIO2_8, 5, 28, 15, 8, false) MUX_CFG(DA850, GPIO2_15, 5, 0, 15, 8, false) - MUX_CFG(DA850, GPIO8_10, 18, 28, 15, 8, false) MUX_CFG(DA850, GPIO4_0, 10, 28, 15, 8, false) MUX_CFG(DA850, GPIO4_1, 10, 24, 15, 8, false) #endif @@ -547,6 +572,14 @@ const short da850_cpgmac_pins[] __initdata = { -1 }; +const short da850_rmii_pins[] __initdata = { + DA850_RMII_TXD_0, DA850_RMII_TXD_1, DA850_RMII_TXEN, + DA850_RMII_CRS_DV, DA850_RMII_RXD_0, DA850_RMII_RXD_1, + DA850_RMII_RXER, DA850_RMII_MHZ_50_CLK, DA850_MDIO_CLK, + DA850_MDIO_D, + -1 +}; + const short da850_mcasp_pins[] __initdata = { DA850_AHCLKX, DA850_ACLKX, DA850_AFSX, DA850_AHCLKR, DA850_ACLKR, DA850_AFSR, DA850_AMUTE, @@ -555,12 +588,11 @@ const short da850_mcasp_pins[] __initdata = { }; const short da850_lcdcntl_pins[] __initdata = { - DA850_LCD_D_1, DA850_LCD_D_2, DA850_LCD_D_3, DA850_LCD_D_4, - DA850_LCD_D_5, DA850_LCD_D_6, DA850_LCD_D_7, DA850_LCD_D_8, - DA850_LCD_D_9, DA850_LCD_D_10, DA850_LCD_D_11, DA850_LCD_D_12, - DA850_LCD_D_13, DA850_LCD_D_14, DA850_LCD_D_15, DA850_LCD_PCLK, - DA850_LCD_HSYNC, DA850_LCD_VSYNC, DA850_NLCD_AC_ENB_CS, DA850_GPIO2_15, - DA850_GPIO8_10, + DA850_LCD_D_0, DA850_LCD_D_1, DA850_LCD_D_2, DA850_LCD_D_3, + DA850_LCD_D_4, DA850_LCD_D_5, DA850_LCD_D_6, DA850_LCD_D_7, + DA850_LCD_D_8, DA850_LCD_D_9, DA850_LCD_D_10, DA850_LCD_D_11, + DA850_LCD_D_12, DA850_LCD_D_13, DA850_LCD_D_14, DA850_LCD_D_15, + DA850_LCD_PCLK, DA850_LCD_HSYNC, DA850_LCD_VSYNC, DA850_NLCD_AC_ENB_CS, -1 }; @@ -790,16 +822,221 @@ static struct davinci_timer_info da850_timer_info = { .clocksource_id = T0_TOP, }; +static void da850_set_async3_src(int pllnum) +{ + struct clk *clk, *newparent = pllnum ? &pll1_sysclk2 : &pll0_sysclk2; + struct davinci_clk *c; + unsigned int v; + int ret; + + for (c = da850_clks; c->lk.clk; c++) { + clk = c->lk.clk; + if (clk->flags & DA850_CLK_ASYNC3) { + ret = clk_set_parent(clk, newparent); + WARN(ret, "DA850: unable to re-parent clock %s", + clk->name); + } + } + + v = __raw_readl(DA8XX_SYSCFG_VIRT(DA8XX_CFGCHIP3_REG)); + if (pllnum) + v |= CFGCHIP3_ASYNC3_CLKSRC; + else + v &= ~CFGCHIP3_ASYNC3_CLKSRC; + __raw_writel(v, DA8XX_SYSCFG_VIRT(DA8XX_CFGCHIP3_REG)); +} + +#ifdef CONFIG_CPU_FREQ +/* + * Notes: + * According to the TRM, minimum PLLM results in maximum power savings. + * The OPP definitions below should keep the PLLM as low as possible. + * + * The output of the PLLM must be between 400 to 600 MHz. + * This rules out prediv of anything but divide-by-one for 24Mhz OSC input. + */ +struct da850_opp { + unsigned int freq; /* in KHz */ + unsigned int prediv; + unsigned int mult; + unsigned int postdiv; + unsigned int cvdd_min; /* in uV */ + unsigned int cvdd_max; /* in uV */ +}; + +static const struct da850_opp da850_opp_300 = { + .freq = 300000, + .prediv = 1, + .mult = 25, + .postdiv = 2, + .cvdd_min = 1140000, + .cvdd_max = 1320000, +}; + +static const struct da850_opp da850_opp_200 = { + .freq = 200000, + .prediv = 1, + .mult = 25, + .postdiv = 3, + .cvdd_min = 1050000, + .cvdd_max = 1160000, +}; + +static const struct da850_opp da850_opp_96 = { + .freq = 96000, + .prediv = 1, + .mult = 20, + .postdiv = 5, + .cvdd_min = 950000, + .cvdd_max = 1050000, +}; + +#define OPP(freq) \ + { \ + .index = (unsigned int) &da850_opp_##freq, \ + .frequency = freq * 1000, \ + } + +static struct cpufreq_frequency_table da850_freq_table[] = { + OPP(300), + OPP(200), + OPP(96), + { + .index = 0, + .frequency = CPUFREQ_TABLE_END, + }, +}; + +#ifdef CONFIG_REGULATOR +static struct regulator *cvdd; + +static int da850_set_voltage(unsigned int index) +{ + struct da850_opp *opp; + + if (!cvdd) + return -ENODEV; + + opp = (struct da850_opp *) da850_freq_table[index].index; + + return regulator_set_voltage(cvdd, opp->cvdd_min, opp->cvdd_max); +} + +static int da850_regulator_init(void) +{ + cvdd = regulator_get(NULL, "cvdd"); + if (WARN(IS_ERR(cvdd), "Unable to obtain voltage regulator for CVDD;" + " voltage scaling unsupported\n")) { + return PTR_ERR(cvdd); + } + + return 0; +} +#endif + +static struct davinci_cpufreq_config cpufreq_info = { + .freq_table = &da850_freq_table[0], +#ifdef CONFIG_REGULATOR + .init = da850_regulator_init, + .set_voltage = da850_set_voltage, +#endif +}; + +static struct platform_device da850_cpufreq_device = { + .name = "cpufreq-davinci", + .dev = { + .platform_data = &cpufreq_info, + }, +}; + +int __init da850_register_cpufreq(void) +{ + return platform_device_register(&da850_cpufreq_device); +} + +static int da850_round_armrate(struct clk *clk, unsigned long rate) +{ + int i, ret = 0, diff; + unsigned int best = (unsigned int) -1; + + rate /= 1000; /* convert to kHz */ + + for (i = 0; da850_freq_table[i].frequency != CPUFREQ_TABLE_END; i++) { + diff = da850_freq_table[i].frequency - rate; + if (diff < 0) + diff = -diff; + + if (diff < best) { + best = diff; + ret = da850_freq_table[i].frequency; + } + } + + return ret * 1000; +} + +static int da850_set_armrate(struct clk *clk, unsigned long index) +{ + struct clk *pllclk = &pll0_clk; + + return clk_set_rate(pllclk, index); +} + +static int da850_set_pll0rate(struct clk *clk, unsigned long index) +{ + unsigned int prediv, mult, postdiv; + struct da850_opp *opp; + struct pll_data *pll = clk->pll_data; + unsigned int v; + int ret; + + opp = (struct da850_opp *) da850_freq_table[index].index; + prediv = opp->prediv; + mult = opp->mult; + postdiv = opp->postdiv; + + /* Unlock writing to PLL registers */ + v = __raw_readl(DA8XX_SYSCFG_VIRT(DA8XX_CFGCHIP0_REG)); + v &= ~CFGCHIP0_PLL_MASTER_LOCK; + __raw_writel(v, DA8XX_SYSCFG_VIRT(DA8XX_CFGCHIP0_REG)); + + ret = davinci_set_pllrate(pll, prediv, mult, postdiv); + if (WARN_ON(ret)) + return ret; + + return 0; +} +#else +int __init da850_register_cpufreq(void) +{ + return 0; +} + +static int da850_set_armrate(struct clk *clk, unsigned long rate) +{ + return -EINVAL; +} + +static int da850_set_pll0rate(struct clk *clk, unsigned long armrate) +{ + return -EINVAL; +} + +static int da850_round_armrate(struct clk *clk, unsigned long rate) +{ + return clk->rate; +} +#endif + + static struct davinci_soc_info davinci_soc_info_da850 = { .io_desc = da850_io_desc, .io_desc_num = ARRAY_SIZE(da850_io_desc), - .jtag_id_base = IO_ADDRESS(DA8XX_JTAG_ID_REG), .ids = da850_ids, .ids_num = ARRAY_SIZE(da850_ids), .cpu_clks = da850_clks, .psc_bases = da850_psc_bases, .psc_bases_num = ARRAY_SIZE(da850_psc_bases), - .pinmux_base = IO_ADDRESS(DA8XX_BOOT_CFG_BASE + 0x120), .pinmux_pins = da850_pins, .pinmux_pins_num = ARRAY_SIZE(da850_pins), .intc_base = (void __iomem *)DA8XX_CP_INTC_VIRT, @@ -816,5 +1053,22 @@ static struct davinci_soc_info davinci_soc_info_da850 = { void __init da850_init(void) { + da8xx_syscfg_base = ioremap(DA8XX_SYSCFG_BASE, SZ_4K); + if (WARN(!da8xx_syscfg_base, "Unable to map syscfg module")) + return; + + davinci_soc_info_da850.jtag_id_base = + DA8XX_SYSCFG_VIRT(DA8XX_JTAG_ID_REG); + davinci_soc_info_da850.pinmux_base = DA8XX_SYSCFG_VIRT(0x120); + davinci_common_init(&davinci_soc_info_da850); + + /* + * Move the clock source of Async3 domain to PLL1 SYSCLK2. + * This helps keeping the peripherals on this domain insulated + * from CPU frequency changes caused by DVFS. The firmware sets + * both PLL0 and PLL1 to the same frequency so, there should not + * be any noticible change even in non-DVFS use cases. + */ + da850_set_async3_src(1); } diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c index 58ad5b66fd6..dd2d32c4ce8 100644 --- a/arch/arm/mach-davinci/devices-da8xx.c +++ b/arch/arm/mach-davinci/devices-da8xx.c @@ -10,8 +10,6 @@ * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. */ -#include <linux/module.h> -#include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> #include <linux/dma-mapping.h> @@ -21,7 +19,7 @@ #include <mach/common.h> #include <mach/time.h> #include <mach/da8xx.h> -#include <video/da8xx-fb.h> +#include <mach/cpuidle.h> #include "clock.h" @@ -30,6 +28,7 @@ #define DA8XX_TPTC1_BASE 0x01c08400 #define DA8XX_WDOG_BASE 0x01c21000 /* DA8XX_TIMER64P1_BASE */ #define DA8XX_I2C0_BASE 0x01c22000 +#define DA8XX_RTC_BASE 0x01C23000 #define DA8XX_EMAC_CPPI_PORT_BASE 0x01e20000 #define DA8XX_EMAC_CPGMACSS_BASE 0x01e22000 #define DA8XX_EMAC_CPGMAC_BASE 0x01e23000 @@ -43,6 +42,8 @@ #define DA8XX_MDIO_REG_OFFSET 0x4000 #define DA8XX_EMAC_CTRL_RAM_SIZE SZ_8K +void __iomem *da8xx_syscfg_base; + static struct plat_serial8250_port da8xx_serial_pdata[] = { { .mapbase = DA8XX_UART0_BASE, @@ -282,6 +283,11 @@ static struct platform_device da8xx_emac_device = { .resource = da8xx_emac_resources, }; +int __init da8xx_register_emac(void) +{ + return platform_device_register(&da8xx_emac_device); +} + static struct resource da830_mcasp1_resources[] = { { .name = "mcasp1", @@ -338,12 +344,7 @@ static struct platform_device da850_mcasp_device = { .resource = da850_mcasp_resources, }; -int __init da8xx_register_emac(void) -{ - return platform_device_register(&da8xx_emac_device); -} - -void __init da8xx_init_mcasp(int id, struct snd_platform_data *pdata) +void __init da8xx_register_mcasp(int id, struct snd_platform_data *pdata) { /* DA830/OMAP-L137 has 3 instances of McASP */ if (cpu_is_davinci_da830() && id == 1) { @@ -379,10 +380,16 @@ static struct lcd_ctrl_config lcd_cfg = { .raster_order = 0, }; -static struct da8xx_lcdc_platform_data da850_evm_lcdc_pdata = { - .manu_name = "sharp", - .controller_data = &lcd_cfg, - .type = "Sharp_LK043T1DG01", +struct da8xx_lcdc_platform_data sharp_lcd035q3dg01_pdata = { + .manu_name = "sharp", + .controller_data = &lcd_cfg, + .type = "Sharp_LCD035Q3DG01", +}; + +struct da8xx_lcdc_platform_data sharp_lk043t1dg01_pdata = { + .manu_name = "sharp", + .controller_data = &lcd_cfg, + .type = "Sharp_LK043T1DG01", }; static struct resource da8xx_lcdc_resources[] = { @@ -398,19 +405,17 @@ static struct resource da8xx_lcdc_resources[] = { }, }; -static struct platform_device da850_lcdc_device = { +static struct platform_device da8xx_lcdc_device = { .name = "da8xx_lcdc", .id = 0, .num_resources = ARRAY_SIZE(da8xx_lcdc_resources), .resource = da8xx_lcdc_resources, - .dev = { - .platform_data = &da850_evm_lcdc_pdata, - } }; -int __init da8xx_register_lcdc(void) +int __init da8xx_register_lcdc(struct da8xx_lcdc_platform_data *pdata) { - return platform_device_register(&da850_lcdc_device); + da8xx_lcdc_device.dev.platform_data = pdata; + return platform_device_register(&da8xx_lcdc_device); } static struct resource da8xx_mmcsd0_resources[] = { @@ -448,3 +453,66 @@ int __init da8xx_register_mmcsd0(struct davinci_mmc_config *config) da8xx_mmcsd0_device.dev.platform_data = config; return platform_device_register(&da8xx_mmcsd0_device); } + +static struct resource da8xx_rtc_resources[] = { + { + .start = DA8XX_RTC_BASE, + .end = DA8XX_RTC_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + { /* timer irq */ + .start = IRQ_DA8XX_RTC, + .end = IRQ_DA8XX_RTC, + .flags = IORESOURCE_IRQ, + }, + { /* alarm irq */ + .start = IRQ_DA8XX_RTC, + .end = IRQ_DA8XX_RTC, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device da8xx_rtc_device = { + .name = "omap_rtc", + .id = -1, + .num_resources = ARRAY_SIZE(da8xx_rtc_resources), + .resource = da8xx_rtc_resources, +}; + +int da8xx_register_rtc(void) +{ + /* Unlock the rtc's registers */ + __raw_writel(0x83e70b13, IO_ADDRESS(DA8XX_RTC_BASE + 0x6c)); + __raw_writel(0x95a4f1e0, IO_ADDRESS(DA8XX_RTC_BASE + 0x70)); + + return platform_device_register(&da8xx_rtc_device); +} + +static struct resource da8xx_cpuidle_resources[] = { + { + .start = DA8XX_DDR2_CTL_BASE, + .end = DA8XX_DDR2_CTL_BASE + SZ_32K - 1, + .flags = IORESOURCE_MEM, + }, +}; + +/* DA8XX devices support DDR2 power down */ +static struct davinci_cpuidle_config da8xx_cpuidle_pdata = { + .ddr2_pdown = 1, +}; + + +static struct platform_device da8xx_cpuidle_device = { + .name = "cpuidle-davinci", + .num_resources = ARRAY_SIZE(da8xx_cpuidle_resources), + .resource = da8xx_cpuidle_resources, + .dev = { + .platform_data = &da8xx_cpuidle_pdata, + }, +}; + +int __init da8xx_register_cpuidle(void) +{ + return platform_device_register(&da8xx_cpuidle_device); +} + diff --git a/arch/arm/mach-davinci/devices.c b/arch/arm/mach-davinci/devices.c index a55b650db71..147949650c2 100644 --- a/arch/arm/mach-davinci/devices.c +++ b/arch/arm/mach-davinci/devices.c @@ -9,15 +9,11 @@ * (at your option) any later version. */ -#include <linux/module.h> -#include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> #include <linux/dma-mapping.h> #include <linux/io.h> -#include <asm/mach/map.h> - #include <mach/hardware.h> #include <mach/i2c.h> #include <mach/irqs.h> @@ -177,7 +173,7 @@ void __init davinci_setup_mmc(int module, struct davinci_mmc_config *config) mmcsd1_resources[0].start = DM365_MMCSD1_BASE; mmcsd1_resources[0].end = DM365_MMCSD1_BASE + SZ_4K - 1; - mmcsd0_resources[2].start = IRQ_DM365_SDIOINT1; + mmcsd1_resources[2].start = IRQ_DM365_SDIOINT1; } else break; diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c index 059670018af..dedf4d4f3a2 100644 --- a/arch/arm/mach-davinci/dm355.c +++ b/arch/arm/mach-davinci/dm355.c @@ -8,7 +8,6 @@ * is licensed "as is" without any warranty of any kind, whether express * or implied. */ -#include <linux/kernel.h> #include <linux/init.h> #include <linux/clk.h> #include <linux/serial_8250.h> @@ -21,7 +20,6 @@ #include <asm/mach/map.h> #include <mach/dm355.h> -#include <mach/clock.h> #include <mach/cputype.h> #include <mach/edma.h> #include <mach/psc.h> diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c index e8151743470..2ec619ec165 100644 --- a/arch/arm/mach-davinci/dm365.c +++ b/arch/arm/mach-davinci/dm365.c @@ -12,7 +12,6 @@ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ -#include <linux/kernel.h> #include <linux/init.h> #include <linux/clk.h> #include <linux/serial_8250.h> @@ -23,7 +22,6 @@ #include <asm/mach/map.h> #include <mach/dm365.h> -#include <mach/clock.h> #include <mach/cputype.h> #include <mach/edma.h> #include <mach/psc.h> @@ -32,6 +30,8 @@ #include <mach/time.h> #include <mach/serial.h> #include <mach/common.h> +#include <mach/asp.h> +#include <mach/keyscan.h> #include "clock.h" #include "mux.h" @@ -369,7 +369,7 @@ static struct clk timer3_clk = { static struct clk usb_clk = { .name = "usb", - .parent = &pll2_sysclk1, + .parent = &pll1_aux_clk, .lpsc = DAVINCI_LPSC_USB, }; @@ -456,7 +456,7 @@ static struct davinci_clk dm365_clks[] = { CLK(NULL, "usb", &usb_clk), CLK("davinci_emac.1", NULL, &emac_clk), CLK("voice_codec", NULL, &voicecodec_clk), - CLK("soc-audio.0", NULL, &asp0_clk), + CLK("davinci-asp.0", NULL, &asp0_clk), CLK(NULL, "rto", &rto_clk), CLK(NULL, "mjcp", &mjcp_clk), CLK(NULL, NULL, NULL), @@ -531,7 +531,7 @@ MUX_CFG(DM365, EMAC_CRS, 3, 2, 1, 1, false) MUX_CFG(DM365, EMAC_MDIO, 3, 1, 1, 1, false) MUX_CFG(DM365, EMAC_MDCLK, 3, 0, 1, 1, false) -MUX_CFG(DM365, KEYPAD, 2, 0, 0x3f, 0x3f, false) +MUX_CFG(DM365, KEYSCAN, 2, 0, 0x3f, 0x3f, false) MUX_CFG(DM365, PWM0, 1, 0, 3, 2, false) MUX_CFG(DM365, PWM0_G23, 3, 26, 3, 3, false) @@ -603,6 +603,9 @@ INT_CFG(DM365, INT_IMX1_ENABLE, 24, 1, 1, false) INT_CFG(DM365, INT_IMX1_DISABLE, 24, 1, 0, false) INT_CFG(DM365, INT_NSF_ENABLE, 25, 1, 1, false) INT_CFG(DM365, INT_NSF_DISABLE, 25, 1, 0, false) + +EVT_CFG(DM365, EVT2_ASP_TX, 0, 1, 0, false) +EVT_CFG(DM365, EVT3_ASP_RX, 1, 1, 0, false) #endif }; @@ -696,6 +699,7 @@ static u8 dm365_default_priorities[DAVINCI_N_AINTC_IRQ] = { [IRQ_I2C] = 3, [IRQ_UARTINT0] = 3, [IRQ_UARTINT1] = 3, + [IRQ_DM365_RTCINT] = 3, [IRQ_DM365_SPIINT0_0] = 3, [IRQ_DM365_SPIINT3_0] = 3, [IRQ_DM365_GPIO0] = 3, @@ -806,6 +810,50 @@ static struct platform_device dm365_edma_device = { .resource = edma_resources, }; +static struct resource dm365_asp_resources[] = { + { + .start = DAVINCI_DM365_ASP0_BASE, + .end = DAVINCI_DM365_ASP0_BASE + SZ_8K - 1, + .flags = IORESOURCE_MEM, + }, + { + .start = DAVINCI_DMA_ASP0_TX, + .end = DAVINCI_DMA_ASP0_TX, + .flags = IORESOURCE_DMA, + }, + { + .start = DAVINCI_DMA_ASP0_RX, + .end = DAVINCI_DMA_ASP0_RX, + .flags = IORESOURCE_DMA, + }, +}; + +static struct platform_device dm365_asp_device = { + .name = "davinci-asp", + .id = 0, + .num_resources = ARRAY_SIZE(dm365_asp_resources), + .resource = dm365_asp_resources, +}; + +static struct resource dm365_rtc_resources[] = { + { + .start = DM365_RTC_BASE, + .end = DM365_RTC_BASE + SZ_1K - 1, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_DM365_RTCINT, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device dm365_rtc_device = { + .name = "rtc_davinci", + .id = 0, + .num_resources = ARRAY_SIZE(dm365_rtc_resources), + .resource = dm365_rtc_resources, +}; + static struct map_desc dm365_io_desc[] = { { .virtual = IO_VIRT, @@ -822,6 +870,28 @@ static struct map_desc dm365_io_desc[] = { }, }; +static struct resource dm365_ks_resources[] = { + { + /* registers */ + .start = DM365_KEYSCAN_BASE, + .end = DM365_KEYSCAN_BASE + SZ_1K - 1, + .flags = IORESOURCE_MEM, + }, + { + /* interrupt */ + .start = IRQ_DM365_KEYINT, + .end = IRQ_DM365_KEYINT, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device dm365_ks_device = { + .name = "davinci_keyscan", + .id = 0, + .num_resources = ARRAY_SIZE(dm365_ks_resources), + .resource = dm365_ks_resources, +}; + /* Contents of JTAG ID register used to identify exact cpu type */ static struct davinci_id dm365_ids[] = { { @@ -907,6 +977,33 @@ static struct davinci_soc_info davinci_soc_info_dm365 = { .sram_len = SZ_32K, }; +void __init dm365_init_asp(struct snd_platform_data *pdata) +{ + davinci_cfg_reg(DM365_MCBSP0_BDX); + davinci_cfg_reg(DM365_MCBSP0_X); + davinci_cfg_reg(DM365_MCBSP0_BFSX); + davinci_cfg_reg(DM365_MCBSP0_BDR); + davinci_cfg_reg(DM365_MCBSP0_R); + davinci_cfg_reg(DM365_MCBSP0_BFSR); + davinci_cfg_reg(DM365_EVT2_ASP_TX); + davinci_cfg_reg(DM365_EVT3_ASP_RX); + dm365_asp_device.dev.platform_data = pdata; + platform_device_register(&dm365_asp_device); +} + +void __init dm365_init_ks(struct davinci_ks_platform_data *pdata) +{ + davinci_cfg_reg(DM365_KEYSCAN); + dm365_ks_device.dev.platform_data = pdata; + platform_device_register(&dm365_ks_device); +} + +void __init dm365_init_rtc(void) +{ + davinci_cfg_reg(DM365_INT_PRTCSS); + platform_device_register(&dm365_rtc_device); +} + void __init dm365_init(void) { davinci_common_init(&davinci_soc_info_dm365); diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c index d6e0fa5a8d8..2cd008156de 100644 --- a/arch/arm/mach-davinci/dm644x.c +++ b/arch/arm/mach-davinci/dm644x.c @@ -8,7 +8,6 @@ * is licensed "as is" without any warranty of any kind, whether express * or implied. */ -#include <linux/kernel.h> #include <linux/init.h> #include <linux/clk.h> #include <linux/serial_8250.h> @@ -18,7 +17,6 @@ #include <asm/mach/map.h> #include <mach/dm644x.h> -#include <mach/clock.h> #include <mach/cputype.h> #include <mach/edma.h> #include <mach/irqs.h> @@ -370,6 +368,11 @@ MUX_CFG(DM644X, ATAEN_DISABLE, 0, 17, 1, 0, true) MUX_CFG(DM644X, HPIEN_DISABLE, 0, 29, 1, 0, true) MUX_CFG(DM644X, AEAW, 0, 0, 31, 31, true) +MUX_CFG(DM644X, AEAW0, 0, 0, 1, 0, true) +MUX_CFG(DM644X, AEAW1, 0, 1, 1, 0, true) +MUX_CFG(DM644X, AEAW2, 0, 2, 1, 0, true) +MUX_CFG(DM644X, AEAW3, 0, 3, 1, 0, true) +MUX_CFG(DM644X, AEAW4, 0, 4, 1, 0, true) MUX_CFG(DM644X, MSTK, 1, 9, 1, 0, false) diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c index 0976049c7b3..829a44bcf79 100644 --- a/arch/arm/mach-davinci/dm646x.c +++ b/arch/arm/mach-davinci/dm646x.c @@ -8,7 +8,6 @@ * is licensed "as is" without any warranty of any kind, whether express * or implied. */ -#include <linux/kernel.h> #include <linux/init.h> #include <linux/clk.h> #include <linux/serial_8250.h> @@ -18,7 +17,6 @@ #include <asm/mach/map.h> #include <mach/dm646x.h> -#include <mach/clock.h> #include <mach/cputype.h> #include <mach/edma.h> #include <mach/irqs.h> @@ -789,7 +787,14 @@ static struct davinci_id dm646x_ids[] = { .part_no = 0xb770, .manufacturer = 0x017, .cpu_id = DAVINCI_CPU_ID_DM6467, - .name = "dm6467", + .name = "dm6467_rev1.x", + }, + { + .variant = 0x1, + .part_no = 0xb770, + .manufacturer = 0x017, + .cpu_id = DAVINCI_CPU_ID_DM6467, + .name = "dm6467_rev3.x", }, }; diff --git a/arch/arm/mach-davinci/dma.c b/arch/arm/mach-davinci/dma.c index f2e57d27295..648fbb760ae 100644 --- a/arch/arm/mach-davinci/dma.c +++ b/arch/arm/mach-davinci/dma.c @@ -18,22 +18,13 @@ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ #include <linux/kernel.h> -#include <linux/sched.h> #include <linux/init.h> #include <linux/module.h> #include <linux/interrupt.h> #include <linux/platform_device.h> -#include <linux/spinlock.h> -#include <linux/compiler.h> #include <linux/io.h> -#include <mach/cputype.h> -#include <mach/memory.h> -#include <mach/hardware.h> -#include <mach/irqs.h> #include <mach/edma.h> -#include <mach/mux.h> - /* Offsets matching "struct edmacc_param" */ #define PARM_OPT 0x00 @@ -509,43 +500,59 @@ static irqreturn_t dma_tc1err_handler(int irq, void *data) return IRQ_HANDLED; } -static int reserve_contiguous_params(int ctlr, unsigned int id, - unsigned int num_params, - unsigned int start_param) +static int reserve_contiguous_slots(int ctlr, unsigned int id, + unsigned int num_slots, + unsigned int start_slot) { int i, j; - unsigned int count = num_params; + unsigned int count = num_slots; + int stop_slot = start_slot; + DECLARE_BITMAP(tmp_inuse, EDMA_MAX_PARAMENTRY); - for (i = start_param; i < edma_info[ctlr]->num_slots; ++i) { + for (i = start_slot; i < edma_info[ctlr]->num_slots; ++i) { j = EDMA_CHAN_SLOT(i); - if (!test_and_set_bit(j, edma_info[ctlr]->edma_inuse)) + if (!test_and_set_bit(j, edma_info[ctlr]->edma_inuse)) { + /* Record our current beginning slot */ + if (count == num_slots) + stop_slot = i; + count--; + set_bit(j, tmp_inuse); + if (count == 0) break; - else if (id == EDMA_CONT_PARAMS_FIXED_EXACT) - break; - else - count = num_params; + } else { + clear_bit(j, tmp_inuse); + + if (id == EDMA_CONT_PARAMS_FIXED_EXACT) { + stop_slot = i; + break; + } else + count = num_slots; + } } /* * We have to clear any bits that we set - * if we run out parameter RAMs, i.e we do find a set - * of contiguous parameter RAMs but do not find the exact number - * requested as we may reach the total number of parameter RAMs + * if we run out parameter RAM slots, i.e we do find a set + * of contiguous parameter RAM slots but do not find the exact number + * requested as we may reach the total number of parameter RAM slots */ - if (count) { - for (j = i - num_params + count + 1; j <= i ; ++j) + if (i == edma_info[ctlr]->num_slots) + stop_slot = i; + + for (j = start_slot; j < stop_slot; j++) + if (test_bit(j, tmp_inuse)) clear_bit(j, edma_info[ctlr]->edma_inuse); + if (count) return -EBUSY; - } - for (j = i - num_params + 1; j <= i; ++j) + for (j = i - num_slots + 1; j <= i; ++j) memcpy_toio(edmacc_regs_base[ctlr] + PARM_OFFSET(j), &dummy_paramset, PARM_SIZE); - return EDMA_CTLR_CHAN(ctlr, i - num_params + 1); + return EDMA_CTLR_CHAN(ctlr, i - num_slots + 1); } /*-----------------------------------------------------------------------*/ @@ -743,26 +750,27 @@ EXPORT_SYMBOL(edma_free_slot); /** * edma_alloc_cont_slots- alloc contiguous parameter RAM slots * The API will return the starting point of a set of - * contiguous PARAM's that have been requested + * contiguous parameter RAM slots that have been requested * * @id: can only be EDMA_CONT_PARAMS_ANY or EDMA_CONT_PARAMS_FIXED_EXACT * or EDMA_CONT_PARAMS_FIXED_NOT_EXACT - * @count: number of contiguous Paramter RAM's - * @param - the start value of Parameter RAM that should be passed if id + * @count: number of contiguous Paramter RAM slots + * @slot - the start value of Parameter RAM slot that should be passed if id * is EDMA_CONT_PARAMS_FIXED_EXACT or EDMA_CONT_PARAMS_FIXED_NOT_EXACT * * If id is EDMA_CONT_PARAMS_ANY then the API starts looking for a set of - * contiguous Parameter RAMs from parameter RAM 64 in the case of DaVinci SOCs - * and 32 in the case of Primus + * contiguous Parameter RAM slots from parameter RAM 64 in the case of + * DaVinci SOCs and 32 in the case of DA8xx SOCs. * * If id is EDMA_CONT_PARAMS_FIXED_EXACT then the API starts looking for a - * set of contiguous parameter RAMs from the "param" that is passed as an + * set of contiguous parameter RAM slots from the "slot" that is passed as an * argument to the API. * * If id is EDMA_CONT_PARAMS_FIXED_NOT_EXACT then the API initially tries - * starts looking for a set of contiguous parameter RAMs from the "param" + * starts looking for a set of contiguous parameter RAMs from the "slot" * that is passed as an argument to the API. On failure the API will try to - * find a set of contiguous Parameter RAMs in the remaining Parameter RAMs + * find a set of contiguous Parameter RAM slots from the remaining Parameter + * RAM slots */ int edma_alloc_cont_slots(unsigned ctlr, unsigned int id, int slot, int count) { @@ -771,12 +779,13 @@ int edma_alloc_cont_slots(unsigned ctlr, unsigned int id, int slot, int count) * the number of channels and lesser than the total number * of slots */ - if (slot < edma_info[ctlr]->num_channels || - slot >= edma_info[ctlr]->num_slots) + if ((id != EDMA_CONT_PARAMS_ANY) && + (slot < edma_info[ctlr]->num_channels || + slot >= edma_info[ctlr]->num_slots)) return -EINVAL; /* - * The number of parameter RAMs requested cannot be less than 1 + * The number of parameter RAM slots requested cannot be less than 1 * and cannot be more than the number of slots minus the number of * channels */ @@ -786,11 +795,11 @@ int edma_alloc_cont_slots(unsigned ctlr, unsigned int id, int slot, int count) switch (id) { case EDMA_CONT_PARAMS_ANY: - return reserve_contiguous_params(ctlr, id, count, + return reserve_contiguous_slots(ctlr, id, count, edma_info[ctlr]->num_channels); case EDMA_CONT_PARAMS_FIXED_EXACT: case EDMA_CONT_PARAMS_FIXED_NOT_EXACT: - return reserve_contiguous_params(ctlr, id, count, slot); + return reserve_contiguous_slots(ctlr, id, count, slot); default: return -EINVAL; } @@ -799,21 +808,21 @@ int edma_alloc_cont_slots(unsigned ctlr, unsigned int id, int slot, int count) EXPORT_SYMBOL(edma_alloc_cont_slots); /** - * edma_free_cont_slots - deallocate DMA parameter RAMs - * @slot: first parameter RAM of a set of parameter RAMs to be freed - * @count: the number of contiguous parameter RAMs to be freed + * edma_free_cont_slots - deallocate DMA parameter RAM slots + * @slot: first parameter RAM of a set of parameter RAM slots to be freed + * @count: the number of contiguous parameter RAM slots to be freed * * This deallocates the parameter RAM slots allocated by * edma_alloc_cont_slots. * Callers/applications need to keep track of sets of contiguous - * parameter RAMs that have been allocated using the edma_alloc_cont_slots + * parameter RAM slots that have been allocated using the edma_alloc_cont_slots * API. * Callers are responsible for ensuring the slots are inactive, and will * not be activated. */ int edma_free_cont_slots(unsigned slot, int count) { - unsigned ctlr; + unsigned ctlr, slot_to_free; int i; ctlr = EDMA_CTLR(slot); @@ -826,11 +835,11 @@ int edma_free_cont_slots(unsigned slot, int count) for (i = slot; i < slot + count; ++i) { ctlr = EDMA_CTLR(i); - slot = EDMA_CHAN_SLOT(i); + slot_to_free = EDMA_CHAN_SLOT(i); - memcpy_toio(edmacc_regs_base[ctlr] + PARM_OFFSET(slot), + memcpy_toio(edmacc_regs_base[ctlr] + PARM_OFFSET(slot_to_free), &dummy_paramset, PARM_SIZE); - clear_bit(slot, edma_info[ctlr]->edma_inuse); + clear_bit(slot_to_free, edma_info[ctlr]->edma_inuse); } return 0; diff --git a/arch/arm/mach-davinci/gpio.c b/arch/arm/mach-davinci/gpio.c index f6ea9db11f4..744755b5323 100644 --- a/arch/arm/mach-davinci/gpio.c +++ b/arch/arm/mach-davinci/gpio.c @@ -12,23 +12,14 @@ #include <linux/errno.h> #include <linux/kernel.h> -#include <linux/list.h> -#include <linux/module.h> #include <linux/clk.h> #include <linux/err.h> #include <linux/io.h> -#include <linux/irq.h> -#include <linux/bitops.h> -#include <mach/cputype.h> -#include <mach/irqs.h> -#include <mach/hardware.h> -#include <mach/common.h> #include <mach/gpio.h> #include <asm/mach/irq.h> - static DEFINE_SPINLOCK(gpio_lock); struct davinci_gpio { diff --git a/arch/arm/mach-davinci/include/mach/asp.h b/arch/arm/mach-davinci/include/mach/asp.h index e07f70ed7c5..834725f1e81 100644 --- a/arch/arm/mach-davinci/include/mach/asp.h +++ b/arch/arm/mach-davinci/include/mach/asp.h @@ -11,6 +11,9 @@ #define DAVINCI_ASP0_BASE 0x01E02000 #define DAVINCI_ASP1_BASE 0x01E04000 +/* Bases of dm365 register banks */ +#define DAVINCI_DM365_ASP0_BASE 0x01D02000 + /* Bases of dm646x register banks */ #define DAVINCI_DM646X_MCASP0_REG_BASE 0x01D01000 #define DAVINCI_DM646X_MCASP1_REG_BASE 0x01D01800 diff --git a/arch/arm/mach-davinci/include/mach/common.h b/arch/arm/mach-davinci/include/mach/common.h index 1fd3917cae4..6ca2c9a0a48 100644 --- a/arch/arm/mach-davinci/include/mach/common.h +++ b/arch/arm/mach-davinci/include/mach/common.h @@ -20,12 +20,6 @@ extern void davinci_irq_init(void); extern void __iomem *davinci_intc_base; extern int davinci_intc_type; -/* parameters describe VBUS sourcing for host mode */ -extern void setup_usb(unsigned mA, unsigned potpgt_msec); - -/* parameters describe VBUS sourcing for host mode */ -extern void setup_usb(unsigned mA, unsigned potpgt_msec); - struct davinci_timer_instance { void __iomem *base; u32 bottom_irq; diff --git a/arch/arm/mach-davinci/include/mach/cpufreq.h b/arch/arm/mach-davinci/include/mach/cpufreq.h new file mode 100644 index 00000000000..3c089cfb6cd --- /dev/null +++ b/arch/arm/mach-davinci/include/mach/cpufreq.h @@ -0,0 +1,26 @@ +/* + * TI DaVinci CPUFreq platform support. + * + * Copyright (C) 2009 Texas Instruments, Inc. http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +#ifndef _MACH_DAVINCI_CPUFREQ_H +#define _MACH_DAVINCI_CPUFREQ_H + +#include <linux/cpufreq.h> + +struct davinci_cpufreq_config { + struct cpufreq_frequency_table *freq_table; + int (*set_voltage) (unsigned int index); + int (*init) (void); +}; + +#endif diff --git a/arch/arm/mach-davinci/include/mach/cpuidle.h b/arch/arm/mach-davinci/include/mach/cpuidle.h new file mode 100644 index 00000000000..cbfc6a9c81b --- /dev/null +++ b/arch/arm/mach-davinci/include/mach/cpuidle.h @@ -0,0 +1,17 @@ +/* + * TI DaVinci cpuidle platform support + * + * 2009 (C) Texas Instruments, Inc. http://www.ti.com/ + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ +#ifndef _MACH_DAVINCI_CPUIDLE_H +#define _MACH_DAVINCI_CPUIDLE_H + +struct davinci_cpuidle_config { + u32 ddr2_pdown; +}; + +#endif diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h index d4095d0572c..90704910d34 100644 --- a/arch/arm/mach-davinci/include/mach/da8xx.h +++ b/arch/arm/mach-davinci/include/mach/da8xx.h @@ -11,12 +11,17 @@ #ifndef __ASM_ARCH_DAVINCI_DA8XX_H #define __ASM_ARCH_DAVINCI_DA8XX_H +#include <video/da8xx-fb.h> + #include <mach/serial.h> #include <mach/edma.h> #include <mach/i2c.h> #include <mach/emac.h> #include <mach/asp.h> #include <mach/mmc.h> +#include <mach/usb.h> + +extern void __iomem *da8xx_syscfg_base; /* * The cp_intc interrupt controller for the da8xx isn't in the same @@ -29,11 +34,15 @@ #define DA8XX_CP_INTC_SIZE SZ_8K #define DA8XX_CP_INTC_VIRT (IO_VIRT - DA8XX_CP_INTC_SIZE - SZ_4K) -#define DA8XX_BOOT_CFG_BASE (IO_PHYS + 0x14000) +#define DA8XX_SYSCFG_BASE (IO_PHYS + 0x14000) +#define DA8XX_SYSCFG_VIRT(x) (da8xx_syscfg_base + (x)) +#define DA8XX_JTAG_ID_REG 0x18 +#define DA8XX_CFGCHIP0_REG 0x17c +#define DA8XX_CFGCHIP2_REG 0x184 +#define DA8XX_CFGCHIP3_REG 0x188 #define DA8XX_PSC0_BASE 0x01c10000 #define DA8XX_PLL0_BASE 0x01c11000 -#define DA8XX_JTAG_ID_REG 0x01c14018 #define DA8XX_TIMER64P0_BASE 0x01c20000 #define DA8XX_TIMER64P1_BASE 0x01c21000 #define DA8XX_GPIO_BASE 0x01e26000 @@ -43,6 +52,7 @@ #define DA8XX_AEMIF_CS2_BASE 0x60000000 #define DA8XX_AEMIF_CS3_BASE 0x62000000 #define DA8XX_AEMIF_CTL_BASE 0x68000000 +#define DA8XX_DDR2_CTL_BASE 0xb0000000 #define PINMUX0 0x00 #define PINMUX1 0x04 @@ -71,13 +81,20 @@ void __init da850_init(void); int da8xx_register_edma(void); int da8xx_register_i2c(int instance, struct davinci_i2c_platform_data *pdata); int da8xx_register_watchdog(void); +int da8xx_register_usb20(unsigned mA, unsigned potpgt); +int da8xx_register_usb11(struct da8xx_ohci_root_hub *pdata); int da8xx_register_emac(void); -int da8xx_register_lcdc(void); +int da8xx_register_lcdc(struct da8xx_lcdc_platform_data *pdata); int da8xx_register_mmcsd0(struct davinci_mmc_config *config); -void __init da8xx_init_mcasp(int id, struct snd_platform_data *pdata); +void __init da8xx_register_mcasp(int id, struct snd_platform_data *pdata); +int da8xx_register_rtc(void); +int da850_register_cpufreq(void); +int da8xx_register_cpuidle(void); extern struct platform_device da8xx_serial_device; extern struct emac_platform_data da8xx_emac_pdata; +extern struct da8xx_lcdc_platform_data sharp_lcd035q3dg01_pdata; +extern struct da8xx_lcdc_platform_data sharp_lk043t1dg01_pdata; extern const short da830_emif25_pins[]; extern const short da830_spi0_pins[]; @@ -110,6 +127,7 @@ extern const short da850_uart2_pins[]; extern const short da850_i2c0_pins[]; extern const short da850_i2c1_pins[]; extern const short da850_cpgmac_pins[]; +extern const short da850_rmii_pins[]; extern const short da850_mcasp_pins[]; extern const short da850_lcdcntl_pins[]; extern const short da850_mmcsd0_pins[]; diff --git a/arch/arm/mach-davinci/include/mach/dm365.h b/arch/arm/mach-davinci/include/mach/dm365.h index 09db4343bb4..f1710a30e7b 100644 --- a/arch/arm/mach-davinci/include/mach/dm365.h +++ b/arch/arm/mach-davinci/include/mach/dm365.h @@ -16,6 +16,8 @@ #include <linux/platform_device.h> #include <mach/hardware.h> #include <mach/emac.h> +#include <mach/asp.h> +#include <mach/keyscan.h> #define DM365_EMAC_BASE (0x01D07000) #define DM365_EMAC_CNTRL_OFFSET (0x0000) @@ -24,6 +26,14 @@ #define DM365_EMAC_MDIO_OFFSET (0x4000) #define DM365_EMAC_CNTRL_RAM_SIZE (0x2000) +/* Base of key scan register bank */ +#define DM365_KEYSCAN_BASE (0x01C69400) + +#define DM365_RTC_BASE (0x01C69000) + void __init dm365_init(void); +void __init dm365_init_asp(struct snd_platform_data *pdata); +void __init dm365_init_ks(struct davinci_ks_platform_data *pdata); +void __init dm365_init_rtc(void); #endif /* __ASM_ARCH_DM365_H */ diff --git a/arch/arm/mach-davinci/include/mach/dm644x.h b/arch/arm/mach-davinci/include/mach/dm644x.h index 0efb73852c2..44e8f0fae9e 100644 --- a/arch/arm/mach-davinci/include/mach/dm644x.h +++ b/arch/arm/mach-davinci/include/mach/dm644x.h @@ -22,7 +22,6 @@ #ifndef __ASM_ARCH_DM644X_H #define __ASM_ARCH_DM644X_H -#include <linux/platform_device.h> #include <mach/hardware.h> #include <mach/emac.h> #include <mach/asp.h> diff --git a/arch/arm/mach-davinci/include/mach/irqs.h b/arch/arm/mach-davinci/include/mach/irqs.h index 3c918a77261..354af71798d 100644 --- a/arch/arm/mach-davinci/include/mach/irqs.h +++ b/arch/arm/mach-davinci/include/mach/irqs.h @@ -217,6 +217,7 @@ #define IRQ_DM365_SDIOINT0 23 #define IRQ_DM365_MMCINT1 27 #define IRQ_DM365_PWMINT3 28 +#define IRQ_DM365_RTCINT 29 #define IRQ_DM365_SDIOINT1 31 #define IRQ_DM365_SPIINT0_0 42 #define IRQ_DM365_SPIINT3_0 43 diff --git a/arch/arm/mach-davinci/include/mach/keyscan.h b/arch/arm/mach-davinci/include/mach/keyscan.h new file mode 100644 index 00000000000..b4e21a2976d --- /dev/null +++ b/arch/arm/mach-davinci/include/mach/keyscan.h @@ -0,0 +1,41 @@ +/* + * Copyright (C) 2009 Texas Instruments, Inc + * + * Author: Miguel Aguilar <miguel.aguilar@ridgerun.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef DAVINCI_KEYSCAN_H +#define DAVINCI_KEYSCAN_H + +#include <linux/io.h> + +enum davinci_matrix_types { + DAVINCI_KEYSCAN_MATRIX_4X4, + DAVINCI_KEYSCAN_MATRIX_5X3, +}; + +struct davinci_ks_platform_data { + unsigned short *keymap; + u32 keymapsize; + u8 rep:1; + u8 strobe; + u8 interval; + u8 matrix_type; +}; + +#endif + diff --git a/arch/arm/mach-davinci/include/mach/mux.h b/arch/arm/mach-davinci/include/mach/mux.h index bb84893a4e8..b60c693985f 100644 --- a/arch/arm/mach-davinci/include/mach/mux.h +++ b/arch/arm/mach-davinci/include/mach/mux.h @@ -40,6 +40,11 @@ enum davinci_dm644x_index { /* AEAW functions */ DM644X_AEAW, + DM644X_AEAW0, + DM644X_AEAW1, + DM644X_AEAW2, + DM644X_AEAW3, + DM644X_AEAW4, /* Memory Stick */ DM644X_MSTK, @@ -237,8 +242,8 @@ enum davinci_dm365_index { DM365_EMAC_MDIO, DM365_EMAC_MDCLK, - /* Keypad */ - DM365_KEYPAD, + /* Key Scan */ + DM365_KEYSCAN, /* PWM */ DM365_PWM0, @@ -774,6 +779,14 @@ enum davinci_da850_index { DA850_MII_RXD_0, DA850_MDIO_CLK, DA850_MDIO_D, + DA850_RMII_TXD_0, + DA850_RMII_TXD_1, + DA850_RMII_TXEN, + DA850_RMII_CRS_DV, + DA850_RMII_RXD_0, + DA850_RMII_RXD_1, + DA850_RMII_RXER, + DA850_RMII_MHZ_50_CLK, /* McASP function */ DA850_ACLKR, @@ -881,8 +894,9 @@ enum davinci_da850_index { DA850_NEMA_CS_2, /* GPIO function */ + DA850_GPIO2_6, + DA850_GPIO2_8, DA850_GPIO2_15, - DA850_GPIO8_10, DA850_GPIO4_0, DA850_GPIO4_1, }; diff --git a/arch/arm/mach-davinci/include/mach/system.h b/arch/arm/mach-davinci/include/mach/system.h index 8e4f10fe126..5a7d7581b8c 100644 --- a/arch/arm/mach-davinci/include/mach/system.h +++ b/arch/arm/mach-davinci/include/mach/system.h @@ -11,9 +11,6 @@ #ifndef __ASM_ARCH_SYSTEM_H #define __ASM_ARCH_SYSTEM_H -#include <linux/io.h> -#include <mach/hardware.h> - extern void davinci_watchdog_reset(void); static inline void arch_idle(void) diff --git a/arch/arm/mach-davinci/include/mach/usb.h b/arch/arm/mach-davinci/include/mach/usb.h new file mode 100644 index 00000000000..e0bc4abe69c --- /dev/null +++ b/arch/arm/mach-davinci/include/mach/usb.h @@ -0,0 +1,59 @@ +/* + * USB related definitions + * + * Copyright (C) 2009 MontaVista Software, Inc. <source@mvista.com> + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#ifndef __ASM_ARCH_USB_H +#define __ASM_ARCH_USB_H + +/* DA8xx CFGCHIP2 (USB 2.0 PHY Control) register bits */ +#define CFGCHIP2_PHYCLKGD (1 << 17) +#define CFGCHIP2_VBUSSENSE (1 << 16) +#define CFGCHIP2_RESET (1 << 15) +#define CFGCHIP2_OTGMODE (3 << 13) +#define CFGCHIP2_NO_OVERRIDE (0 << 13) +#define CFGCHIP2_FORCE_HOST (1 << 13) +#define CFGCHIP2_FORCE_DEVICE (2 << 13) +#define CFGCHIP2_FORCE_HOST_VBUS_LOW (3 << 13) +#define CFGCHIP2_USB1PHYCLKMUX (1 << 12) +#define CFGCHIP2_USB2PHYCLKMUX (1 << 11) +#define CFGCHIP2_PHYPWRDN (1 << 10) +#define CFGCHIP2_OTGPWRDN (1 << 9) +#define CFGCHIP2_DATPOL (1 << 8) +#define CFGCHIP2_USB1SUSPENDM (1 << 7) +#define CFGCHIP2_PHY_PLLON (1 << 6) /* override PLL suspend */ +#define CFGCHIP2_SESENDEN (1 << 5) /* Vsess_end comparator */ +#define CFGCHIP2_VBDTCTEN (1 << 4) /* Vbus comparator */ +#define CFGCHIP2_REFFREQ (0xf << 0) +#define CFGCHIP2_REFFREQ_12MHZ (1 << 0) +#define CFGCHIP2_REFFREQ_24MHZ (2 << 0) +#define CFGCHIP2_REFFREQ_48MHZ (3 << 0) + +struct da8xx_ohci_root_hub; + +typedef void (*da8xx_ocic_handler_t)(struct da8xx_ohci_root_hub *hub, + unsigned port); + +/* Passed as the platform data to the OHCI driver */ +struct da8xx_ohci_root_hub { + /* Switch the port power on/off */ + int (*set_power)(unsigned port, int on); + /* Read the port power status */ + int (*get_power)(unsigned port); + /* Read the port over-current indicator */ + int (*get_oci)(unsigned port); + /* Over-current indicator change notification (pass NULL to disable) */ + int (*ocic_notify)(da8xx_ocic_handler_t handler); + + /* Time from power on to power good (in 2 ms units) */ + u8 potpgt; +}; + +void davinci_setup_usb(unsigned mA, unsigned potpgt_ms); + +#endif /* ifndef __ASM_ARCH_USB_H */ diff --git a/arch/arm/mach-davinci/mux.c b/arch/arm/mach-davinci/mux.c index 898905e4894..f757e83415f 100644 --- a/arch/arm/mach-davinci/mux.c +++ b/arch/arm/mach-davinci/mux.c @@ -19,7 +19,6 @@ #include <linux/module.h> #include <linux/spinlock.h> -#include <mach/hardware.h> #include <mach/mux.h> #include <mach/common.h> diff --git a/arch/arm/mach-davinci/psc.c b/arch/arm/mach-davinci/psc.c index a78b657e916..04a3cb72c5a 100644 --- a/arch/arm/mach-davinci/psc.c +++ b/arch/arm/mach-davinci/psc.c @@ -19,14 +19,11 @@ * */ #include <linux/kernel.h> -#include <linux/module.h> #include <linux/init.h> #include <linux/io.h> #include <mach/cputype.h> -#include <mach/hardware.h> #include <mach/psc.h> -#include <mach/mux.h> /* PSC register offsets */ #define EPCPR 0x070 diff --git a/arch/arm/mach-davinci/serial.c b/arch/arm/mach-davinci/serial.c index c530c7333d0..7ce5ba08657 100644 --- a/arch/arm/mach-davinci/serial.c +++ b/arch/arm/mach-davinci/serial.c @@ -28,14 +28,8 @@ #include <linux/clk.h> #include <linux/io.h> -#include <asm/irq.h> -#include <mach/hardware.h> #include <mach/serial.h> -#include <mach/irqs.h> #include <mach/cputype.h> -#include <mach/common.h> - -#include "clock.h" static inline unsigned int serial_read_reg(struct plat_serial8250_port *up, int offset) diff --git a/arch/arm/mach-davinci/sram.c b/arch/arm/mach-davinci/sram.c index 4f1fc9b318b..db0f7787faf 100644 --- a/arch/arm/mach-davinci/sram.c +++ b/arch/arm/mach-davinci/sram.c @@ -9,15 +9,12 @@ * (at your option) any later version. */ #include <linux/module.h> -#include <linux/kernel.h> #include <linux/init.h> #include <linux/genalloc.h> #include <mach/common.h> -#include <mach/memory.h> #include <mach/sram.h> - static struct gen_pool *sram_pool; void *sram_alloc(size_t len, dma_addr_t *dma) diff --git a/arch/arm/mach-davinci/time.c b/arch/arm/mach-davinci/time.c index 0d1b6d407b4..42d985beece 100644 --- a/arch/arm/mach-davinci/time.c +++ b/arch/arm/mach-davinci/time.c @@ -14,20 +14,14 @@ #include <linux/interrupt.h> #include <linux/clocksource.h> #include <linux/clockchips.h> -#include <linux/spinlock.h> #include <linux/io.h> #include <linux/clk.h> #include <linux/err.h> -#include <linux/device.h> #include <linux/platform_device.h> #include <mach/hardware.h> -#include <asm/system.h> -#include <asm/irq.h> #include <asm/mach/irq.h> #include <asm/mach/time.h> -#include <asm/errno.h> -#include <mach/io.h> #include <mach/cputype.h> #include <mach/time.h> #include "clock.h" diff --git a/arch/arm/mach-davinci/usb.c b/arch/arm/mach-davinci/usb.c index 06f55931620..31f0cbea0ca 100644 --- a/arch/arm/mach-davinci/usb.c +++ b/arch/arm/mach-davinci/usb.c @@ -1,21 +1,21 @@ /* * USB */ -#include <linux/kernel.h> -#include <linux/module.h> #include <linux/init.h> #include <linux/platform_device.h> #include <linux/dma-mapping.h> #include <linux/usb/musb.h> -#include <linux/usb/otg.h> #include <mach/common.h> -#include <mach/hardware.h> #include <mach/irqs.h> #include <mach/cputype.h> +#include <mach/usb.h> -#define DAVINCI_USB_OTG_BASE 0x01C64000 +#define DAVINCI_USB_OTG_BASE 0x01c64000 + +#define DA8XX_USB0_BASE 0x01e00000 +#define DA8XX_USB1_BASE 0x01e25000 #if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE) static struct musb_hdrc_eps_bits musb_eps[] = { @@ -85,10 +85,10 @@ static struct platform_device usb_dev = { .num_resources = ARRAY_SIZE(usb_resources), }; -void __init setup_usb(unsigned mA, unsigned potpgt_msec) +void __init davinci_setup_usb(unsigned mA, unsigned potpgt_ms) { - usb_data.power = mA / 2; - usb_data.potpgt = potpgt_msec / 2; + usb_data.power = mA > 510 ? 255 : mA / 2; + usb_data.potpgt = (potpgt_ms + 1) / 2; if (cpu_is_davinci_dm646x()) { /* Override the defaults as DM6467 uses different IRQs. */ @@ -100,11 +100,77 @@ void __init setup_usb(unsigned mA, unsigned potpgt_msec) platform_device_register(&usb_dev); } +#ifdef CONFIG_ARCH_DAVINCI_DA8XX +static struct resource da8xx_usb20_resources[] = { + { + .start = DA8XX_USB0_BASE, + .end = DA8XX_USB0_BASE + SZ_64K - 1, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_DA8XX_USB_INT, + .flags = IORESOURCE_IRQ, + }, +}; + +int __init da8xx_register_usb20(unsigned mA, unsigned potpgt) +{ + usb_data.clock = "usb20"; + usb_data.power = mA > 510 ? 255 : mA / 2; + usb_data.potpgt = (potpgt + 1) / 2; + + usb_dev.resource = da8xx_usb20_resources; + usb_dev.num_resources = ARRAY_SIZE(da8xx_usb20_resources); + + return platform_device_register(&usb_dev); +} +#endif /* CONFIG_DAVINCI_DA8XX */ + #else -void __init setup_usb(unsigned mA, unsigned potpgt_msec) +void __init davinci_setup_usb(unsigned mA, unsigned potpgt_ms) { } +#ifdef CONFIG_ARCH_DAVINCI_DA8XX +int __init da8xx_register_usb20(unsigned mA, unsigned potpgt) +{ + return 0; +} +#endif + #endif /* CONFIG_USB_MUSB_HDRC */ +#ifdef CONFIG_ARCH_DAVINCI_DA8XX +static struct resource da8xx_usb11_resources[] = { + [0] = { + .start = DA8XX_USB1_BASE, + .end = DA8XX_USB1_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_DA8XX_IRQN, + .end = IRQ_DA8XX_IRQN, + .flags = IORESOURCE_IRQ, + }, +}; + +static u64 da8xx_usb11_dma_mask = DMA_BIT_MASK(32); + +static struct platform_device da8xx_usb11_device = { + .name = "ohci", + .id = 0, + .dev = { + .dma_mask = &da8xx_usb11_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .num_resources = ARRAY_SIZE(da8xx_usb11_resources), + .resource = da8xx_usb11_resources, +}; + +int __init da8xx_register_usb11(struct da8xx_ohci_root_hub *pdata) +{ + da8xx_usb11_device.dev.platform_data = pdata; + return platform_device_register(&da8xx_usb11_device); +} +#endif /* CONFIG_DAVINCI_DA8XX */ diff --git a/arch/arm/mach-lh7a40x/include/mach/hardware.h b/arch/arm/mach-lh7a40x/include/mach/hardware.h index 48e827d2fa5..59d2ace3521 100644 --- a/arch/arm/mach-lh7a40x/include/mach/hardware.h +++ b/arch/arm/mach-lh7a40x/include/mach/hardware.h @@ -31,7 +31,7 @@ /* * This __REG() version gives the same results as the one above, except * that we are fooling gcc somehow so it generates far better and smaller - * assembly code for access to contigous registers. It's a shame that gcc + * assembly code for access to contiguous registers. It's a shame that gcc * doesn't guess this by itself. */ #include <asm/types.h> diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c index 5a275bab2df..71e1a3fad0e 100644 --- a/arch/arm/mach-omap1/board-nokia770.c +++ b/arch/arm/mach-omap1/board-nokia770.c @@ -14,6 +14,7 @@ #include <linux/platform_device.h> #include <linux/input.h> #include <linux/clk.h> +#include <linux/omapfb.h> #include <linux/spi/spi.h> #include <linux/spi/ads7846.h> @@ -32,7 +33,6 @@ #include <plat/keypad.h> #include <plat/common.h> #include <plat/dsp_common.h> -#include <plat/omapfb.h> #include <plat/hwa742.h> #include <plat/lcd_mipid.h> #include <plat/mmc.h> diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c index 491364e44c7..5bda9fdbee9 100644 --- a/arch/arm/mach-omap2/board-3430sdp.c +++ b/arch/arm/mach-omap2/board-3430sdp.c @@ -37,6 +37,7 @@ #include <plat/common.h> #include <plat/dma.h> #include <plat/gpmc.h> +#include <plat/display.h> #include <plat/control.h> #include <plat/gpmc-smc91x.h> @@ -152,31 +153,152 @@ static struct spi_board_info sdp3430_spi_board_info[] __initdata = { }, }; -static struct platform_device sdp3430_lcd_device = { - .name = "sdp2430_lcd", - .id = -1, + +#define SDP3430_LCD_PANEL_BACKLIGHT_GPIO 8 +#define SDP3430_LCD_PANEL_ENABLE_GPIO 5 + +static unsigned backlight_gpio; +static unsigned enable_gpio; +static int lcd_enabled; +static int dvi_enabled; + +static void __init sdp3430_display_init(void) +{ + int r; + + enable_gpio = SDP3430_LCD_PANEL_ENABLE_GPIO; + backlight_gpio = SDP3430_LCD_PANEL_BACKLIGHT_GPIO; + + r = gpio_request(enable_gpio, "LCD reset"); + if (r) { + printk(KERN_ERR "failed to get LCD reset GPIO\n"); + goto err0; + } + + r = gpio_request(backlight_gpio, "LCD Backlight"); + if (r) { + printk(KERN_ERR "failed to get LCD backlight GPIO\n"); + goto err1; + } + + gpio_direction_output(enable_gpio, 0); + gpio_direction_output(backlight_gpio, 0); + + return; +err1: + gpio_free(enable_gpio); +err0: + return; +} + +static int sdp3430_panel_enable_lcd(struct omap_dss_device *dssdev) +{ + if (dvi_enabled) { + printk(KERN_ERR "cannot enable LCD, DVI is enabled\n"); + return -EINVAL; + } + + gpio_direction_output(enable_gpio, 1); + gpio_direction_output(backlight_gpio, 1); + + lcd_enabled = 1; + + return 0; +} + +static void sdp3430_panel_disable_lcd(struct omap_dss_device *dssdev) +{ + lcd_enabled = 0; + + gpio_direction_output(enable_gpio, 0); + gpio_direction_output(backlight_gpio, 0); +} + +static int sdp3430_panel_enable_dvi(struct omap_dss_device *dssdev) +{ + if (lcd_enabled) { + printk(KERN_ERR "cannot enable DVI, LCD is enabled\n"); + return -EINVAL; + } + + dvi_enabled = 1; + + return 0; +} + +static void sdp3430_panel_disable_dvi(struct omap_dss_device *dssdev) +{ + dvi_enabled = 0; +} + +static int sdp3430_panel_enable_tv(struct omap_dss_device *dssdev) +{ + return 0; +} + +static void sdp3430_panel_disable_tv(struct omap_dss_device *dssdev) +{ +} + + +static struct omap_dss_device sdp3430_lcd_device = { + .name = "lcd", + .driver_name = "sharp_ls_panel", + .type = OMAP_DISPLAY_TYPE_DPI, + .phy.dpi.data_lines = 16, + .platform_enable = sdp3430_panel_enable_lcd, + .platform_disable = sdp3430_panel_disable_lcd, }; -static struct regulator_consumer_supply sdp3430_vdac_supply = { - .supply = "vdac", - .dev = &sdp3430_lcd_device.dev, +static struct omap_dss_device sdp3430_dvi_device = { + .name = "dvi", + .driver_name = "generic_panel", + .type = OMAP_DISPLAY_TYPE_DPI, + .phy.dpi.data_lines = 24, + .platform_enable = sdp3430_panel_enable_dvi, + .platform_disable = sdp3430_panel_disable_dvi, }; -static struct regulator_consumer_supply sdp3430_vdvi_supply = { - .supply = "vdvi", - .dev = &sdp3430_lcd_device.dev, +static struct omap_dss_device sdp3430_tv_device = { + .name = "tv", + .driver_name = "venc", + .type = OMAP_DISPLAY_TYPE_VENC, + .phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO, + .platform_enable = sdp3430_panel_enable_tv, + .platform_disable = sdp3430_panel_disable_tv, }; -static struct platform_device *sdp3430_devices[] __initdata = { + +static struct omap_dss_device *sdp3430_dss_devices[] = { &sdp3430_lcd_device, + &sdp3430_dvi_device, + &sdp3430_tv_device, }; -static struct omap_lcd_config sdp3430_lcd_config __initdata = { - .ctrl_name = "internal", +static struct omap_dss_board_info sdp3430_dss_data = { + .num_devices = ARRAY_SIZE(sdp3430_dss_devices), + .devices = sdp3430_dss_devices, + .default_device = &sdp3430_lcd_device, +}; + +static struct platform_device sdp3430_dss_device = { + .name = "omapdss", + .id = -1, + .dev = { + .platform_data = &sdp3430_dss_data, + }, +}; + +static struct regulator_consumer_supply sdp3430_vdda_dac_supply = { + .supply = "vdda_dac", + .dev = &sdp3430_dss_device.dev, +}; + +static struct platform_device *sdp3430_devices[] __initdata = { + &sdp3430_dss_device, }; static struct omap_board_config_kernel sdp3430_config[] __initdata = { - { OMAP_TAG_LCD, &sdp3430_lcd_config }, }; static void __init omap_3430sdp_init_irq(void) @@ -392,22 +514,34 @@ static struct regulator_init_data sdp3430_vdac = { | REGULATOR_CHANGE_STATUS, }, .num_consumer_supplies = 1, - .consumer_supplies = &sdp3430_vdac_supply, + .consumer_supplies = &sdp3430_vdda_dac_supply, }; /* VPLL2 for digital video outputs */ +static struct regulator_consumer_supply sdp3430_vpll2_supplies[] = { + { + .supply = "vdvi", + .dev = &sdp3430_lcd_device.dev, + }, + { + .supply = "vdds_dsi", + .dev = &sdp3430_dss_device.dev, + } +}; + static struct regulator_init_data sdp3430_vpll2 = { .constraints = { .name = "VDVI", .min_uV = 1800000, .max_uV = 1800000, + .apply_uV = true, .valid_modes_mask = REGULATOR_MODE_NORMAL | REGULATOR_MODE_STANDBY, .valid_ops_mask = REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &sdp3430_vdvi_supply, + .num_consumer_supplies = ARRAY_SIZE(sdp3430_vpll2_supplies), + .consumer_supplies = sdp3430_vpll2_supplies, }; static struct twl4030_codec_audio_data sdp3430_audio = { @@ -521,6 +655,7 @@ static void __init omap_3430sdp_init(void) omap_serial_init(); usb_musb_init(); board_smc91x_init(); + sdp3430_display_init(); enable_board_wakeup_source(); usb_ehci_init(&ehci_pdata); } diff --git a/arch/arm/mach-omap2/clock24xx.c b/arch/arm/mach-omap2/clock24xx.c index e70e7e000ea..845b478ebee 100644 --- a/arch/arm/mach-omap2/clock24xx.c +++ b/arch/arm/mach-omap2/clock24xx.c @@ -116,10 +116,10 @@ static struct omap_clk omap24xx_clks[] = { CLK(NULL, "mdm_ick", &mdm_ick, CK_243X), CLK(NULL, "mdm_osc_ck", &mdm_osc_ck, CK_243X), /* DSS domain clocks */ - CLK("omapfb", "ick", &dss_ick, CK_243X | CK_242X), - CLK("omapfb", "dss1_fck", &dss1_fck, CK_243X | CK_242X), - CLK("omapfb", "dss2_fck", &dss2_fck, CK_243X | CK_242X), - CLK("omapfb", "tv_fck", &dss_54m_fck, CK_243X | CK_242X), + CLK("omapdss", "ick", &dss_ick, CK_243X | CK_242X), + CLK("omapdss", "dss1_fck", &dss1_fck, CK_243X | CK_242X), + CLK("omapdss", "dss2_fck", &dss2_fck, CK_243X | CK_242X), + CLK("omapdss", "tv_fck", &dss_54m_fck, CK_243X | CK_242X), /* L3 domain clocks */ CLK(NULL, "core_l3_ck", &core_l3_ck, CK_243X | CK_242X), CLK(NULL, "ssi_fck", &ssi_ssr_sst_fck, CK_243X | CK_242X), diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c index 9f2feaf7986..ecbb5cd8eec 100644 --- a/arch/arm/mach-omap2/clock34xx.c +++ b/arch/arm/mach-omap2/clock34xx.c @@ -236,13 +236,13 @@ static struct omap_clk omap34xx_clks[] = { CLK("omap_rng", "ick", &rng_ick, CK_343X), CLK(NULL, "sha11_ick", &sha11_ick, CK_343X), CLK(NULL, "des1_ick", &des1_ick, CK_343X), - CLK("omapfb", "dss1_fck", &dss1_alwon_fck_3430es1, CK_3430ES1), - CLK("omapfb", "dss1_fck", &dss1_alwon_fck_3430es2, CK_3430ES2), - CLK("omapfb", "tv_fck", &dss_tv_fck, CK_343X), - CLK("omapfb", "video_fck", &dss_96m_fck, CK_343X), - CLK("omapfb", "dss2_fck", &dss2_alwon_fck, CK_343X), - CLK("omapfb", "ick", &dss_ick_3430es1, CK_3430ES1), - CLK("omapfb", "ick", &dss_ick_3430es2, CK_3430ES2), + CLK("omapdss", "dss1_fck", &dss1_alwon_fck_3430es1, CK_3430ES1), + CLK("omapdss", "dss1_fck", &dss1_alwon_fck_3430es2, CK_3430ES2), + CLK("omapdss", "tv_fck", &dss_tv_fck, CK_343X), + CLK("omapdss", "video_fck", &dss_96m_fck, CK_343X), + CLK("omapdss", "dss2_fck", &dss2_alwon_fck, CK_343X), + CLK("omapdss", "ick", &dss_ick_3430es1, CK_3430ES1), + CLK("omapdss", "ick", &dss_ick_3430es2, CK_3430ES2), CLK(NULL, "cam_mclk", &cam_mclk, CK_343X), CLK(NULL, "cam_ick", &cam_ick, CK_343X), CLK(NULL, "csi2_96m_fck", &csi2_96m_fck, CK_343X), diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index 59d28b2fd8c..6a4d8e46870 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -22,17 +22,18 @@ #include <linux/init.h> #include <linux/io.h> #include <linux/clk.h> +#include <linux/omapfb.h> #include <asm/tlb.h> #include <asm/mach/map.h> #include <plat/mux.h> -#include <plat/omapfb.h> #include <plat/sram.h> #include <plat/sdrc.h> #include <plat/gpmc.h> #include <plat/serial.h> +#include <plat/vram.h> #ifndef CONFIG_ARCH_OMAP4 /* FIXME: Remove this once clkdev is ready */ #include "clock.h" @@ -264,6 +265,7 @@ void __init omap2_map_common_io(void) omap2_check_revision(); omap_sram_init(); omapfb_reserve_sdram(); + omap_vram_reserve_sdram(); } /* diff --git a/arch/arm/mach-omap2/sdrc.c b/arch/arm/mach-omap2/sdrc.c index 9a592199321..cbfbd142e94 100644 --- a/arch/arm/mach-omap2/sdrc.c +++ b/arch/arm/mach-omap2/sdrc.c @@ -160,3 +160,19 @@ void __init omap2_sdrc_init(struct omap_sdrc_params *sdrc_cs0, sdrc_write_reg(l, SDRC_POWER); omap2_sms_save_context(); } + +void omap2_sms_write_rot_control(u32 val, unsigned ctx) +{ + sms_write_reg(val, SMS_ROT_CONTROL(ctx)); +} + +void omap2_sms_write_rot_size(u32 val, unsigned ctx) +{ + sms_write_reg(val, SMS_ROT_SIZE(ctx)); +} + +void omap2_sms_write_rot_physical_ba(u32 val, unsigned ctx) +{ + sms_write_reg(val, SMS_ROT_PHYSICAL_BA(ctx)); +} + diff --git a/arch/arm/mach-orion5x/pci.c b/arch/arm/mach-orion5x/pci.c index 36dc5413cc9..bdf96eb523b 100644 --- a/arch/arm/mach-orion5x/pci.c +++ b/arch/arm/mach-orion5x/pci.c @@ -463,7 +463,7 @@ static void __init orion5x_setup_pci_wins(struct mbus_dram_target_info *dram) writel(win_enable, PCI_BAR_ENABLE); /* - * Disable automatic update of address remaping when writing to BARs. + * Disable automatic update of address remapping when writing to BARs. */ orion5x_setbits(PCI_ADDR_DECODE_CTRL, 1); } diff --git a/arch/arm/mach-pxa/include/mach/palmld.h b/arch/arm/mach-pxa/include/mach/palmld.h index 8721b801022..ae536e86d8e 100644 --- a/arch/arm/mach-pxa/include/mach/palmld.h +++ b/arch/arm/mach-pxa/include/mach/palmld.h @@ -91,7 +91,7 @@ /* BATTERY */ #define PALMLD_BAT_MAX_VOLTAGE 4000 /* 4.00V maximum voltage */ #define PALMLD_BAT_MIN_VOLTAGE 3550 /* 3.55V critical voltage */ -#define PALMLD_BAT_MAX_CURRENT 0 /* unknokn */ +#define PALMLD_BAT_MAX_CURRENT 0 /* unknown */ #define PALMLD_BAT_MIN_CURRENT 0 /* unknown */ #define PALMLD_BAT_MAX_CHARGE 1 /* unknown */ #define PALMLD_BAT_MIN_CHARGE 1 /* unknown */ diff --git a/arch/arm/mach-pxa/include/mach/palmt5.h b/arch/arm/mach-pxa/include/mach/palmt5.h index d15662aba00..6baf7469d4e 100644 --- a/arch/arm/mach-pxa/include/mach/palmt5.h +++ b/arch/arm/mach-pxa/include/mach/palmt5.h @@ -66,7 +66,7 @@ /* BATTERY */ #define PALMT5_BAT_MAX_VOLTAGE 4000 /* 4.00v current voltage */ #define PALMT5_BAT_MIN_VOLTAGE 3550 /* 3.55v critical voltage */ -#define PALMT5_BAT_MAX_CURRENT 0 /* unknokn */ +#define PALMT5_BAT_MAX_CURRENT 0 /* unknown */ #define PALMT5_BAT_MIN_CURRENT 0 /* unknown */ #define PALMT5_BAT_MAX_CHARGE 1 /* unknown */ #define PALMT5_BAT_MIN_CHARGE 1 /* unknown */ diff --git a/arch/arm/mach-pxa/include/mach/palmtc.h b/arch/arm/mach-pxa/include/mach/palmtc.h index 3dc9b074ab4..3f9dd3fd463 100644 --- a/arch/arm/mach-pxa/include/mach/palmtc.h +++ b/arch/arm/mach-pxa/include/mach/palmtc.h @@ -68,7 +68,7 @@ /* BATTERY */ #define PALMTC_BAT_MAX_VOLTAGE 4000 /* 4.00V maximum voltage */ #define PALMTC_BAT_MIN_VOLTAGE 3550 /* 3.55V critical voltage */ -#define PALMTC_BAT_MAX_CURRENT 0 /* unknokn */ +#define PALMTC_BAT_MAX_CURRENT 0 /* unknown */ #define PALMTC_BAT_MIN_CURRENT 0 /* unknown */ #define PALMTC_BAT_MAX_CHARGE 1 /* unknown */ #define PALMTC_BAT_MIN_CHARGE 1 /* unknown */ diff --git a/arch/arm/mach-pxa/include/mach/palmte2.h b/arch/arm/mach-pxa/include/mach/palmte2.h index 12361341f9d..f89e989a763 100644 --- a/arch/arm/mach-pxa/include/mach/palmte2.h +++ b/arch/arm/mach-pxa/include/mach/palmte2.h @@ -59,7 +59,7 @@ /* BATTERY */ #define PALMTE2_BAT_MAX_VOLTAGE 4000 /* 4.00v current voltage */ #define PALMTE2_BAT_MIN_VOLTAGE 3550 /* 3.55v critical voltage */ -#define PALMTE2_BAT_MAX_CURRENT 0 /* unknokn */ +#define PALMTE2_BAT_MAX_CURRENT 0 /* unknown */ #define PALMTE2_BAT_MIN_CURRENT 0 /* unknown */ #define PALMTE2_BAT_MAX_CHARGE 1 /* unknown */ #define PALMTE2_BAT_MIN_CHARGE 1 /* unknown */ diff --git a/arch/arm/mach-pxa/include/mach/palmtx.h b/arch/arm/mach-pxa/include/mach/palmtx.h index 1be0db6ed55..10abc4f2e8e 100644 --- a/arch/arm/mach-pxa/include/mach/palmtx.h +++ b/arch/arm/mach-pxa/include/mach/palmtx.h @@ -94,7 +94,7 @@ /* BATTERY */ #define PALMTX_BAT_MAX_VOLTAGE 4000 /* 4.00v current voltage */ #define PALMTX_BAT_MIN_VOLTAGE 3550 /* 3.55v critical voltage */ -#define PALMTX_BAT_MAX_CURRENT 0 /* unknokn */ +#define PALMTX_BAT_MAX_CURRENT 0 /* unknown */ #define PALMTX_BAT_MIN_CURRENT 0 /* unknown */ #define PALMTX_BAT_MAX_CHARGE 1 /* unknown */ #define PALMTX_BAT_MIN_CHARGE 1 /* unknown */ diff --git a/arch/arm/mach-pxa/include/mach/palmz72.h b/arch/arm/mach-pxa/include/mach/palmz72.h index 2806ef69ba5..2bbcf70dd93 100644 --- a/arch/arm/mach-pxa/include/mach/palmz72.h +++ b/arch/arm/mach-pxa/include/mach/palmz72.h @@ -49,7 +49,7 @@ /* Battery */ #define PALMZ72_BAT_MAX_VOLTAGE 4000 /* 4.00v current voltage */ #define PALMZ72_BAT_MIN_VOLTAGE 3550 /* 3.55v critical voltage */ -#define PALMZ72_BAT_MAX_CURRENT 0 /* unknokn */ +#define PALMZ72_BAT_MAX_CURRENT 0 /* unknown */ #define PALMZ72_BAT_MIN_CURRENT 0 /* unknown */ #define PALMZ72_BAT_MAX_CHARGE 1 /* unknown */ #define PALMZ72_BAT_MIN_CHARGE 1 /* unknown */ diff --git a/arch/arm/mach-s3c2400/Kconfig b/arch/arm/mach-s3c2400/Kconfig index deab0722836..fdd8f5e96fa 100644 --- a/arch/arm/mach-s3c2400/Kconfig +++ b/arch/arm/mach-s3c2400/Kconfig @@ -1,13 +1,7 @@ -# arch/arm/mach-s3c2400/Kconfig -# # Copyright 2007 Simtec Electronics # # Licensed under GPLv2 - - menu "S3C2400 Machines" - endmenu - diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig index dd1fcc7e670..554731868b0 100644 --- a/arch/arm/mach-s3c2410/Kconfig +++ b/arch/arm/mach-s3c2410/Kconfig @@ -1,5 +1,3 @@ -# arch/arm/mach-s3c2410/Kconfig -# # Copyright 2007 Simtec Electronics # # Licensed under GPLv2 diff --git a/arch/arm/mach-s3c2412/Kconfig b/arch/arm/mach-s3c2412/Kconfig index c2bdc4635d1..9a8c0657ae5 100644 --- a/arch/arm/mach-s3c2412/Kconfig +++ b/arch/arm/mach-s3c2412/Kconfig @@ -1,5 +1,3 @@ -# arch/arm/mach-s3c2412/Kconfig -# # Copyright 2007 Simtec Electronics # # Licensed under GPLv2 @@ -90,6 +88,4 @@ config MACH_VSTMS help Say Y here if you are using an VSTMS board - endmenu - diff --git a/arch/arm/mach-s3c2440/Kconfig b/arch/arm/mach-s3c2440/Kconfig index cf10e14b7b4..80879358eb2 100644 --- a/arch/arm/mach-s3c2440/Kconfig +++ b/arch/arm/mach-s3c2440/Kconfig @@ -1,5 +1,3 @@ -# arch/arm/mach-s3c2440/Kconfig -# # Copyright 2007 Simtec Electronics # # Licensed under GPLv2 @@ -122,4 +120,3 @@ config MACH_MINI2440 available via various sources. It can come with a 3.5" or 7" touch LCD. endmenu - diff --git a/arch/arm/mach-s3c2442/Kconfig b/arch/arm/mach-s3c2442/Kconfig index 103e913f225..8d3811852fc 100644 --- a/arch/arm/mach-s3c2442/Kconfig +++ b/arch/arm/mach-s3c2442/Kconfig @@ -1,5 +1,3 @@ -# arch/arm/mach-s3c2442/Kconfig -# # Copyright 2007 Simtec Electronics # # Licensed under GPLv2 @@ -36,6 +34,4 @@ config MACH_NEO1973_GTA02 help Say Y here if you are using the Openmoko GTA02 / Freerunner GSM Phone - endmenu - diff --git a/arch/arm/mach-s3c2443/Kconfig b/arch/arm/mach-s3c2443/Kconfig index 212141baebe..4314c442490 100644 --- a/arch/arm/mach-s3c2443/Kconfig +++ b/arch/arm/mach-s3c2443/Kconfig @@ -1,5 +1,3 @@ -# arch/arm/mach-s3c2443/Kconfig -# # Copyright 2007 Simtec Electronics # # Licensed under GPLv2 diff --git a/arch/arm/mach-s3c6400/Kconfig b/arch/arm/mach-s3c6400/Kconfig index 770b72067e3..a250bf68709 100644 --- a/arch/arm/mach-s3c6400/Kconfig +++ b/arch/arm/mach-s3c6400/Kconfig @@ -1,5 +1,3 @@ -# arch/arm/mach-s3c6400/Kconfig -# # Copyright 2008 Openmoko, Inc. # Simtec Electronics, Ben Dooks <ben@simtec.co.uk> # diff --git a/arch/arm/mach-s3c6400/setup-sdhci.c b/arch/arm/mach-s3c6400/setup-sdhci.c index b93dafbee1f..1039937403b 100644 --- a/arch/arm/mach-s3c6400/setup-sdhci.c +++ b/arch/arm/mach-s3c6400/setup-sdhci.c @@ -30,7 +30,7 @@ char *s3c6400_hsmmc_clksrcs[4] = { [0] = "hsmmc", [1] = "hsmmc", [2] = "mmc_bus", - /* [3] = "48m", - note not succesfully used yet */ + /* [3] = "48m", - note not successfully used yet */ }; void s3c6400_setup_sdhci_cfg_card(struct platform_device *dev, diff --git a/arch/arm/mach-s3c6410/Kconfig b/arch/arm/mach-s3c6410/Kconfig index 72d4b11b207..162f4561f80 100644 --- a/arch/arm/mach-s3c6410/Kconfig +++ b/arch/arm/mach-s3c6410/Kconfig @@ -1,5 +1,3 @@ -# arch/arm/mach-s3c6410/Kconfig -# # Copyright 2008 Openmoko, Inc. # Copyright 2008 Simtec Electronics # diff --git a/arch/arm/mach-s3c6410/setup-sdhci.c b/arch/arm/mach-s3c6410/setup-sdhci.c index 20666f3bd47..816d2d9f9ef 100644 --- a/arch/arm/mach-s3c6410/setup-sdhci.c +++ b/arch/arm/mach-s3c6410/setup-sdhci.c @@ -30,7 +30,7 @@ char *s3c6410_hsmmc_clksrcs[4] = { [0] = "hsmmc", [1] = "hsmmc", [2] = "mmc_bus", - /* [3] = "48m", - note not succesfully used yet */ + /* [3] = "48m", - note not successfully used yet */ }; diff --git a/arch/arm/mach-s5pc100/Kconfig b/arch/arm/mach-s5pc100/Kconfig index 0dd2b8c6eab..27ec167d280 100644 --- a/arch/arm/mach-s5pc100/Kconfig +++ b/arch/arm/mach-s5pc100/Kconfig @@ -1,5 +1,3 @@ -# arch/arm/mach-s5pc100/Kconfig -# # Copyright 2009 Samsung Electronics Co. # Byungho Min <bhmin@samsung.com> # diff --git a/arch/arm/mach-sa1100/dma.c b/arch/arm/mach-sa1100/dma.c index cb4521a6f42..ad660350c29 100644 --- a/arch/arm/mach-sa1100/dma.c +++ b/arch/arm/mach-sa1100/dma.c @@ -65,7 +65,7 @@ static irqreturn_t dma_irq_handler(int irq, void *dev_id) /** - * sa1100_request_dma - allocate one of the SA11x0's DMA chanels + * sa1100_request_dma - allocate one of the SA11x0's DMA channels * @device: The SA11x0 peripheral targeted by this request * @device_id: An ascii name for the claiming device * @callback: Function to be called when the DMA completes diff --git a/arch/arm/mach-u300/include/mach/u300-regs.h b/arch/arm/mach-u300/include/mach/u300-regs.h index 88333dfb19f..56721a0cd2a 100644 --- a/arch/arm/mach-u300/include/mach/u300-regs.h +++ b/arch/arm/mach-u300/include/mach/u300-regs.h @@ -6,7 +6,7 @@ * Copyright (C) 2006-2009 ST-Ericsson AB * License terms: GNU General Public License (GPL) version 2 * Basic register address definitions in physical memory and - * some block defintions for core devices like the timer. + * some block definitions for core devices like the timer. * Author: Linus Walleij <linus.walleij@stericsson.com> */ diff --git a/arch/arm/mm/mmap.c b/arch/arm/mm/mmap.c index 2b7996401b0..f5abc51c5a0 100644 --- a/arch/arm/mm/mmap.c +++ b/arch/arm/mm/mmap.c @@ -54,7 +54,8 @@ arch_get_unmapped_area(struct file *filp, unsigned long addr, * We enforce the MAP_FIXED case. */ if (flags & MAP_FIXED) { - if (aliasing && flags & MAP_SHARED && addr & (SHMLBA - 1)) + if (aliasing && flags & MAP_SHARED && + (addr - (pgoff << PAGE_SHIFT)) & (SHMLBA - 1)) return -EINVAL; return addr; } diff --git a/arch/arm/plat-mxc/Makefile b/arch/arm/plat-mxc/Makefile index 4cbca9da150..996cbac6932 100644 --- a/arch/arm/plat-mxc/Makefile +++ b/arch/arm/plat-mxc/Makefile @@ -9,6 +9,7 @@ obj-$(CONFIG_ARCH_MX1) += iomux-mx1-mx2.o dma-mx1-mx2.o obj-$(CONFIG_ARCH_MX2) += iomux-mx1-mx2.o dma-mx1-mx2.o obj-$(CONFIG_ARCH_MXC_IOMUX_V3) += iomux-v3.o obj-$(CONFIG_MXC_PWM) += pwm.o +obj-$(CONFIG_USB_EHCI_MXC) += ehci.o obj-$(CONFIG_MXC_ULPI) += ulpi.o obj-$(CONFIG_ARCH_MXC_AUDMUX_V1) += audmux-v1.o obj-$(CONFIG_ARCH_MXC_AUDMUX_V2) += audmux-v2.o diff --git a/arch/arm/plat-mxc/ehci.c b/arch/arm/plat-mxc/ehci.c new file mode 100644 index 00000000000..41599be882e --- /dev/null +++ b/arch/arm/plat-mxc/ehci.c @@ -0,0 +1,92 @@ +/* + * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY + * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software Foundation, + * Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/platform_device.h> +#include <linux/io.h> + +#include <mach/hardware.h> +#include <mach/mxc_ehci.h> + +#define USBCTRL_OTGBASE_OFFSET 0x600 + +#define MX31_OTG_SIC_SHIFT 29 +#define MX31_OTG_SIC_MASK (0xf << MX31_OTG_SIC_SHIFT) +#define MX31_OTG_PM_BIT (1 << 24) + +#define MX31_H2_SIC_SHIFT 21 +#define MX31_H2_SIC_MASK (0xf << MX31_H2_SIC_SHIFT) +#define MX31_H2_PM_BIT (1 << 16) +#define MX31_H2_DT_BIT (1 << 5) + +#define MX31_H1_SIC_SHIFT 13 +#define MX31_H1_SIC_MASK (0xf << MX31_H1_SIC_SHIFT) +#define MX31_H1_PM_BIT (1 << 8) +#define MX31_H1_DT_BIT (1 << 4) + +int mxc_set_usbcontrol(int port, unsigned int flags) +{ + unsigned int v; + + if (cpu_is_mx31()) { + v = readl(IO_ADDRESS(MX31_OTG_BASE_ADDR + + USBCTRL_OTGBASE_OFFSET)); + + switch (port) { + case 0: /* OTG port */ + v &= ~(MX31_OTG_SIC_MASK | MX31_OTG_PM_BIT); + v |= (flags & MXC_EHCI_INTERFACE_MASK) + << MX31_OTG_SIC_SHIFT; + if (flags & MXC_EHCI_POWER_PINS_ENABLED) + v |= MX31_OTG_PM_BIT; + + break; + case 1: /* H1 port */ + v &= ~(MX31_H1_SIC_MASK | MX31_H1_PM_BIT); + v |= (flags & MXC_EHCI_INTERFACE_MASK) + << MX31_H1_SIC_SHIFT; + if (flags & MXC_EHCI_POWER_PINS_ENABLED) + v |= MX31_H1_PM_BIT; + + if (!(flags & MXC_EHCI_TTL_ENABLED)) + v |= MX31_H1_DT_BIT; + + break; + case 2: /* H2 port */ + v &= ~(MX31_H2_SIC_MASK | MX31_H2_PM_BIT); + v |= (flags & MXC_EHCI_INTERFACE_MASK) + << MX31_H2_SIC_SHIFT; + if (!(flags & MXC_EHCI_POWER_PINS_ENABLED)) + v |= MX31_H2_PM_BIT; + + if (!(flags & MXC_EHCI_TTL_ENABLED)) + v |= MX31_H2_DT_BIT; + + break; + } + + writel(v, IO_ADDRESS(MX31_OTG_BASE_ADDR + + USBCTRL_OTGBASE_OFFSET)); + return 0; + } + + printk(KERN_WARNING + "%s() unable to setup USBCONTROL for this CPU\n", __func__); + return -EINVAL; +} +EXPORT_SYMBOL(mxc_set_usbcontrol); + diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx3.h b/arch/arm/plat-mxc/include/mach/iomux-mx3.h index eaabd4e9692..e1fc6da1cd1 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-mx3.h +++ b/arch/arm/plat-mxc/include/mach/iomux-mx3.h @@ -112,7 +112,7 @@ enum iomux_gp_func { * setups a single pin: * - reserves the pin so that it is not claimed by another driver * - setups the iomux according to the configuration - * - if the pin is configured as a GPIO, we claim it throug kernel gpiolib + * - if the pin is configured as a GPIO, we claim it through kernel gpiolib */ int mxc_iomux_alloc_pin(const unsigned int pin, const char *label); /* diff --git a/arch/arm/plat-mxc/include/mach/iomux-mxc91231.h b/arch/arm/plat-mxc/include/mach/iomux-mxc91231.h index 9f13061192c..3887f3fe29d 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-mxc91231.h +++ b/arch/arm/plat-mxc/include/mach/iomux-mxc91231.h @@ -48,7 +48,7 @@ * setups a single pin: * - reserves the pin so that it is not claimed by another driver * - setups the iomux according to the configuration - * - if the pin is configured as a GPIO, we claim it throug kernel gpiolib + * - if the pin is configured as a GPIO, we claim it through kernel gpiolib */ int mxc_iomux_alloc_pin(const unsigned int pin_mode, const char *label); /* diff --git a/arch/arm/plat-mxc/include/mach/mxc_ehci.h b/arch/arm/plat-mxc/include/mach/mxc_ehci.h new file mode 100644 index 00000000000..8f796239393 --- /dev/null +++ b/arch/arm/plat-mxc/include/mach/mxc_ehci.h @@ -0,0 +1,37 @@ +#ifndef __INCLUDE_ASM_ARCH_MXC_EHCI_H +#define __INCLUDE_ASM_ARCH_MXC_EHCI_H + +/* values for portsc field */ +#define MXC_EHCI_PHY_LOW_POWER_SUSPEND (1 << 23) +#define MXC_EHCI_FORCE_FS (1 << 24) +#define MXC_EHCI_UTMI_8BIT (0 << 28) +#define MXC_EHCI_UTMI_16BIT (1 << 28) +#define MXC_EHCI_SERIAL (1 << 29) +#define MXC_EHCI_MODE_UTMI (0 << 30) +#define MXC_EHCI_MODE_PHILIPS (1 << 30) +#define MXC_EHCI_MODE_ULPI (2 << 30) +#define MXC_EHCI_MODE_SERIAL (3 << 30) + +/* values for flags field */ +#define MXC_EHCI_INTERFACE_DIFF_UNI (0 << 0) +#define MXC_EHCI_INTERFACE_DIFF_BI (1 << 0) +#define MXC_EHCI_INTERFACE_SINGLE_UNI (2 << 0) +#define MXC_EHCI_INTERFACE_SINGLE_BI (3 << 0) +#define MXC_EHCI_INTERFACE_MASK (0xf) + +#define MXC_EHCI_POWER_PINS_ENABLED (1 << 5) +#define MXC_EHCI_TTL_ENABLED (1 << 6) + +struct mxc_usbh_platform_data { + int (*init)(struct platform_device *pdev); + int (*exit)(struct platform_device *pdev); + + unsigned int portsc; + unsigned int flags; + struct otg_transceiver *otg; +}; + +int mxc_set_usbcontrol(int port, unsigned int flags); + +#endif /* __INCLUDE_ASM_ARCH_MXC_EHCI_H */ + diff --git a/arch/arm/plat-mxc/pwm.c b/arch/arm/plat-mxc/pwm.c index 5cdbd605ac0..4ff6dfe0428 100644 --- a/arch/arm/plat-mxc/pwm.c +++ b/arch/arm/plat-mxc/pwm.c @@ -94,7 +94,7 @@ int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns) * register to follow the ratio of duty_ns vs. period_ns * accordingly. * - * This is good enought for programming the brightness of + * This is good enough for programming the brightness of * the LCD backlight. * * The real implementation would divide PERCLK[0] first by diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c index be4ce070fb4..d17375e06a1 100644 --- a/arch/arm/plat-omap/dma.c +++ b/arch/arm/plat-omap/dma.c @@ -1252,7 +1252,7 @@ static void create_dma_lch_chain(int lch_head, int lch_queue) * OMAP_DMA_DYNAMIC_CHAIN * @params - Channel parameters * - * @return - Succes : 0 + * @return - Success : 0 * Failure: -EINVAL/-ENOMEM */ int omap_request_dma_chain(int dev_id, const char *dev_name, diff --git a/arch/arm/plat-omap/fb.c b/arch/arm/plat-omap/fb.c index 78a4ce538db..d3eea4f4753 100644 --- a/arch/arm/plat-omap/fb.c +++ b/arch/arm/plat-omap/fb.c @@ -28,13 +28,13 @@ #include <linux/platform_device.h> #include <linux/bootmem.h> #include <linux/io.h> +#include <linux/omapfb.h> #include <mach/hardware.h> #include <asm/mach/map.h> #include <plat/board.h> #include <plat/sram.h> -#include <plat/omapfb.h> #if defined(CONFIG_FB_OMAP) || defined(CONFIG_FB_OMAP_MODULE) @@ -55,6 +55,10 @@ static struct platform_device omap_fb_device = { .num_resources = 0, }; +void omapfb_set_platform_data(struct omapfb_platform_data *data) +{ +} + static inline int ranges_overlap(unsigned long start1, unsigned long size1, unsigned long start2, unsigned long size2) { @@ -327,7 +331,33 @@ static inline int omap_init_fb(void) arch_initcall(omap_init_fb); -#else +#elif defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE) + +static u64 omap_fb_dma_mask = ~(u32)0; +static struct omapfb_platform_data omapfb_config; + +static struct platform_device omap_fb_device = { + .name = "omapfb", + .id = -1, + .dev = { + .dma_mask = &omap_fb_dma_mask, + .coherent_dma_mask = ~(u32)0, + .platform_data = &omapfb_config, + }, + .num_resources = 0, +}; + +void omapfb_set_platform_data(struct omapfb_platform_data *data) +{ + omapfb_config = *data; +} + +static inline int omap_init_fb(void) +{ + return platform_device_register(&omap_fb_device); +} + +arch_initcall(omap_init_fb); void omapfb_reserve_sdram(void) {} unsigned long omapfb_reserve_sram(unsigned long sram_pstart, @@ -339,5 +369,20 @@ unsigned long omapfb_reserve_sram(unsigned long sram_pstart, return 0; } +#else + +void omapfb_set_platform_data(struct omapfb_platform_data *data) +{ +} + +void omapfb_reserve_sdram(void) {} +unsigned long omapfb_reserve_sram(unsigned long sram_pstart, + unsigned long sram_vstart, + unsigned long sram_size, + unsigned long start_avail, + unsigned long size_avail) +{ + return 0; +} #endif diff --git a/arch/arm/plat-omap/include/plat/display.h b/arch/arm/plat-omap/include/plat/display.h new file mode 100644 index 00000000000..c66e464732d --- /dev/null +++ b/arch/arm/plat-omap/include/plat/display.h @@ -0,0 +1,575 @@ +/* + * linux/include/asm-arm/arch-omap/display.h + * + * Copyright (C) 2008 Nokia Corporation + * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef __ASM_ARCH_OMAP_DISPLAY_H +#define __ASM_ARCH_OMAP_DISPLAY_H + +#include <linux/list.h> +#include <linux/kobject.h> +#include <linux/device.h> +#include <asm/atomic.h> + +#define DISPC_IRQ_FRAMEDONE (1 << 0) +#define DISPC_IRQ_VSYNC (1 << 1) +#define DISPC_IRQ_EVSYNC_EVEN (1 << 2) +#define DISPC_IRQ_EVSYNC_ODD (1 << 3) +#define DISPC_IRQ_ACBIAS_COUNT_STAT (1 << 4) +#define DISPC_IRQ_PROG_LINE_NUM (1 << 5) +#define DISPC_IRQ_GFX_FIFO_UNDERFLOW (1 << 6) +#define DISPC_IRQ_GFX_END_WIN (1 << 7) +#define DISPC_IRQ_PAL_GAMMA_MASK (1 << 8) +#define DISPC_IRQ_OCP_ERR (1 << 9) +#define DISPC_IRQ_VID1_FIFO_UNDERFLOW (1 << 10) +#define DISPC_IRQ_VID1_END_WIN (1 << 11) +#define DISPC_IRQ_VID2_FIFO_UNDERFLOW (1 << 12) +#define DISPC_IRQ_VID2_END_WIN (1 << 13) +#define DISPC_IRQ_SYNC_LOST (1 << 14) +#define DISPC_IRQ_SYNC_LOST_DIGIT (1 << 15) +#define DISPC_IRQ_WAKEUP (1 << 16) + +struct omap_dss_device; +struct omap_overlay_manager; + +enum omap_display_type { + OMAP_DISPLAY_TYPE_NONE = 0, + OMAP_DISPLAY_TYPE_DPI = 1 << 0, + OMAP_DISPLAY_TYPE_DBI = 1 << 1, + OMAP_DISPLAY_TYPE_SDI = 1 << 2, + OMAP_DISPLAY_TYPE_DSI = 1 << 3, + OMAP_DISPLAY_TYPE_VENC = 1 << 4, +}; + +enum omap_plane { + OMAP_DSS_GFX = 0, + OMAP_DSS_VIDEO1 = 1, + OMAP_DSS_VIDEO2 = 2 +}; + +enum omap_channel { + OMAP_DSS_CHANNEL_LCD = 0, + OMAP_DSS_CHANNEL_DIGIT = 1, +}; + +enum omap_color_mode { + OMAP_DSS_COLOR_CLUT1 = 1 << 0, /* BITMAP 1 */ + OMAP_DSS_COLOR_CLUT2 = 1 << 1, /* BITMAP 2 */ + OMAP_DSS_COLOR_CLUT4 = 1 << 2, /* BITMAP 4 */ + OMAP_DSS_COLOR_CLUT8 = 1 << 3, /* BITMAP 8 */ + OMAP_DSS_COLOR_RGB12U = 1 << 4, /* RGB12, 16-bit container */ + OMAP_DSS_COLOR_ARGB16 = 1 << 5, /* ARGB16 */ + OMAP_DSS_COLOR_RGB16 = 1 << 6, /* RGB16 */ + OMAP_DSS_COLOR_RGB24U = 1 << 7, /* RGB24, 32-bit container */ + OMAP_DSS_COLOR_RGB24P = 1 << 8, /* RGB24, 24-bit container */ + OMAP_DSS_COLOR_YUV2 = 1 << 9, /* YUV2 4:2:2 co-sited */ + OMAP_DSS_COLOR_UYVY = 1 << 10, /* UYVY 4:2:2 co-sited */ + OMAP_DSS_COLOR_ARGB32 = 1 << 11, /* ARGB32 */ + OMAP_DSS_COLOR_RGBA32 = 1 << 12, /* RGBA32 */ + OMAP_DSS_COLOR_RGBX32 = 1 << 13, /* RGBx32 */ + + OMAP_DSS_COLOR_GFX_OMAP2 = + OMAP_DSS_COLOR_CLUT1 | OMAP_DSS_COLOR_CLUT2 | + OMAP_DSS_COLOR_CLUT4 | OMAP_DSS_COLOR_CLUT8 | + OMAP_DSS_COLOR_RGB12U | OMAP_DSS_COLOR_RGB16 | + OMAP_DSS_COLOR_RGB24U | OMAP_DSS_COLOR_RGB24P, + + OMAP_DSS_COLOR_VID_OMAP2 = + OMAP_DSS_COLOR_RGB16 | OMAP_DSS_COLOR_RGB24U | + OMAP_DSS_COLOR_RGB24P | OMAP_DSS_COLOR_YUV2 | + OMAP_DSS_COLOR_UYVY, + + OMAP_DSS_COLOR_GFX_OMAP3 = + OMAP_DSS_COLOR_CLUT1 | OMAP_DSS_COLOR_CLUT2 | + OMAP_DSS_COLOR_CLUT4 | OMAP_DSS_COLOR_CLUT8 | + OMAP_DSS_COLOR_RGB12U | OMAP_DSS_COLOR_ARGB16 | + OMAP_DSS_COLOR_RGB16 | OMAP_DSS_COLOR_RGB24U | + OMAP_DSS_COLOR_RGB24P | OMAP_DSS_COLOR_ARGB32 | + OMAP_DSS_COLOR_RGBA32 | OMAP_DSS_COLOR_RGBX32, + + OMAP_DSS_COLOR_VID1_OMAP3 = + OMAP_DSS_COLOR_RGB12U | OMAP_DSS_COLOR_RGB16 | + OMAP_DSS_COLOR_RGB24U | OMAP_DSS_COLOR_RGB24P | + OMAP_DSS_COLOR_YUV2 | OMAP_DSS_COLOR_UYVY, + + OMAP_DSS_COLOR_VID2_OMAP3 = + OMAP_DSS_COLOR_RGB12U | OMAP_DSS_COLOR_ARGB16 | + OMAP_DSS_COLOR_RGB16 | OMAP_DSS_COLOR_RGB24U | + OMAP_DSS_COLOR_RGB24P | OMAP_DSS_COLOR_YUV2 | + OMAP_DSS_COLOR_UYVY | OMAP_DSS_COLOR_ARGB32 | + OMAP_DSS_COLOR_RGBA32 | OMAP_DSS_COLOR_RGBX32, +}; + +enum omap_lcd_display_type { + OMAP_DSS_LCD_DISPLAY_STN, + OMAP_DSS_LCD_DISPLAY_TFT, +}; + +enum omap_dss_load_mode { + OMAP_DSS_LOAD_CLUT_AND_FRAME = 0, + OMAP_DSS_LOAD_CLUT_ONLY = 1, + OMAP_DSS_LOAD_FRAME_ONLY = 2, + OMAP_DSS_LOAD_CLUT_ONCE_FRAME = 3, +}; + +enum omap_dss_trans_key_type { + OMAP_DSS_COLOR_KEY_GFX_DST = 0, + OMAP_DSS_COLOR_KEY_VID_SRC = 1, +}; + +enum omap_rfbi_te_mode { + OMAP_DSS_RFBI_TE_MODE_1 = 1, + OMAP_DSS_RFBI_TE_MODE_2 = 2, +}; + +enum omap_panel_config { + OMAP_DSS_LCD_IVS = 1<<0, + OMAP_DSS_LCD_IHS = 1<<1, + OMAP_DSS_LCD_IPC = 1<<2, + OMAP_DSS_LCD_IEO = 1<<3, + OMAP_DSS_LCD_RF = 1<<4, + OMAP_DSS_LCD_ONOFF = 1<<5, + + OMAP_DSS_LCD_TFT = 1<<20, +}; + +enum omap_dss_venc_type { + OMAP_DSS_VENC_TYPE_COMPOSITE, + OMAP_DSS_VENC_TYPE_SVIDEO, +}; + +enum omap_display_caps { + OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE = 1 << 0, + OMAP_DSS_DISPLAY_CAP_TEAR_ELIM = 1 << 1, +}; + +enum omap_dss_update_mode { + OMAP_DSS_UPDATE_DISABLED = 0, + OMAP_DSS_UPDATE_AUTO, + OMAP_DSS_UPDATE_MANUAL, +}; + +enum omap_dss_display_state { + OMAP_DSS_DISPLAY_DISABLED = 0, + OMAP_DSS_DISPLAY_ACTIVE, + OMAP_DSS_DISPLAY_SUSPENDED, +}; + +/* XXX perhaps this should be removed */ +enum omap_dss_overlay_managers { + OMAP_DSS_OVL_MGR_LCD, + OMAP_DSS_OVL_MGR_TV, +}; + +enum omap_dss_rotation_type { + OMAP_DSS_ROT_DMA = 0, + OMAP_DSS_ROT_VRFB = 1, +}; + +/* clockwise rotation angle */ +enum omap_dss_rotation_angle { + OMAP_DSS_ROT_0 = 0, + OMAP_DSS_ROT_90 = 1, + OMAP_DSS_ROT_180 = 2, + OMAP_DSS_ROT_270 = 3, +}; + +enum omap_overlay_caps { + OMAP_DSS_OVL_CAP_SCALE = 1 << 0, + OMAP_DSS_OVL_CAP_DISPC = 1 << 1, +}; + +enum omap_overlay_manager_caps { + OMAP_DSS_OVL_MGR_CAP_DISPC = 1 << 0, +}; + +/* RFBI */ + +struct rfbi_timings { + int cs_on_time; + int cs_off_time; + int we_on_time; + int we_off_time; + int re_on_time; + int re_off_time; + int we_cycle_time; + int re_cycle_time; + int cs_pulse_width; + int access_time; + + int clk_div; + + u32 tim[5]; /* set by rfbi_convert_timings() */ + + int converted; +}; + +void omap_rfbi_write_command(const void *buf, u32 len); +void omap_rfbi_read_data(void *buf, u32 len); +void omap_rfbi_write_data(const void *buf, u32 len); +void omap_rfbi_write_pixels(const void __iomem *buf, int scr_width, + u16 x, u16 y, + u16 w, u16 h); +int omap_rfbi_enable_te(bool enable, unsigned line); +int omap_rfbi_setup_te(enum omap_rfbi_te_mode mode, + unsigned hs_pulse_time, unsigned vs_pulse_time, + int hs_pol_inv, int vs_pol_inv, int extif_div); + +/* DSI */ +void dsi_bus_lock(void); +void dsi_bus_unlock(void); +int dsi_vc_dcs_write(int channel, u8 *data, int len); +int dsi_vc_dcs_write_nosync(int channel, u8 *data, int len); +int dsi_vc_dcs_read(int channel, u8 dcs_cmd, u8 *buf, int buflen); +int dsi_vc_set_max_rx_packet_size(int channel, u16 len); +int dsi_vc_send_null(int channel); +int dsi_vc_send_bta_sync(int channel); + +/* Board specific data */ +struct omap_dss_board_info { + int (*get_last_off_on_transaction_id)(struct device *dev); + int num_devices; + struct omap_dss_device **devices; + struct omap_dss_device *default_device; +}; + +struct omap_video_timings { + /* Unit: pixels */ + u16 x_res; + /* Unit: pixels */ + u16 y_res; + /* Unit: KHz */ + u32 pixel_clock; + /* Unit: pixel clocks */ + u16 hsw; /* Horizontal synchronization pulse width */ + /* Unit: pixel clocks */ + u16 hfp; /* Horizontal front porch */ + /* Unit: pixel clocks */ + u16 hbp; /* Horizontal back porch */ + /* Unit: line clocks */ + u16 vsw; /* Vertical synchronization pulse width */ + /* Unit: line clocks */ + u16 vfp; /* Vertical front porch */ + /* Unit: line clocks */ + u16 vbp; /* Vertical back porch */ +}; + +#ifdef CONFIG_OMAP2_DSS_VENC +/* Hardcoded timings for tv modes. Venc only uses these to + * identify the mode, and does not actually use the configs + * itself. However, the configs should be something that + * a normal monitor can also show */ +const extern struct omap_video_timings omap_dss_pal_timings; +const extern struct omap_video_timings omap_dss_ntsc_timings; +#endif + +struct omap_overlay_info { + bool enabled; + + u32 paddr; + void __iomem *vaddr; + u16 screen_width; + u16 width; + u16 height; + enum omap_color_mode color_mode; + u8 rotation; + enum omap_dss_rotation_type rotation_type; + bool mirror; + + u16 pos_x; + u16 pos_y; + u16 out_width; /* if 0, out_width == width */ + u16 out_height; /* if 0, out_height == height */ + u8 global_alpha; +}; + +struct omap_overlay { + struct kobject kobj; + struct list_head list; + + /* static fields */ + const char *name; + int id; + enum omap_color_mode supported_modes; + enum omap_overlay_caps caps; + + /* dynamic fields */ + struct omap_overlay_manager *manager; + struct omap_overlay_info info; + + /* if true, info has been changed, but not applied() yet */ + bool info_dirty; + + int (*set_manager)(struct omap_overlay *ovl, + struct omap_overlay_manager *mgr); + int (*unset_manager)(struct omap_overlay *ovl); + + int (*set_overlay_info)(struct omap_overlay *ovl, + struct omap_overlay_info *info); + void (*get_overlay_info)(struct omap_overlay *ovl, + struct omap_overlay_info *info); + + int (*wait_for_go)(struct omap_overlay *ovl); +}; + +struct omap_overlay_manager_info { + u32 default_color; + + enum omap_dss_trans_key_type trans_key_type; + u32 trans_key; + bool trans_enabled; + + bool alpha_enabled; +}; + +struct omap_overlay_manager { + struct kobject kobj; + struct list_head list; + + /* static fields */ + const char *name; + int id; + enum omap_overlay_manager_caps caps; + int num_overlays; + struct omap_overlay **overlays; + enum omap_display_type supported_displays; + + /* dynamic fields */ + struct omap_dss_device *device; + struct omap_overlay_manager_info info; + + bool device_changed; + /* if true, info has been changed but not applied() yet */ + bool info_dirty; + + int (*set_device)(struct omap_overlay_manager *mgr, + struct omap_dss_device *dssdev); + int (*unset_device)(struct omap_overlay_manager *mgr); + + int (*set_manager_info)(struct omap_overlay_manager *mgr, + struct omap_overlay_manager_info *info); + void (*get_manager_info)(struct omap_overlay_manager *mgr, + struct omap_overlay_manager_info *info); + + int (*apply)(struct omap_overlay_manager *mgr); + int (*wait_for_go)(struct omap_overlay_manager *mgr); +}; + +struct omap_dss_device { + struct device dev; + + enum omap_display_type type; + + union { + struct { + u8 data_lines; + } dpi; + + struct { + u8 channel; + u8 data_lines; + } rfbi; + + struct { + u8 datapairs; + } sdi; + + struct { + u8 clk_lane; + u8 clk_pol; + u8 data1_lane; + u8 data1_pol; + u8 data2_lane; + u8 data2_pol; + + struct { + u16 regn; + u16 regm; + u16 regm3; + u16 regm4; + + u16 lp_clk_div; + + u16 lck_div; + u16 pck_div; + } div; + + bool ext_te; + u8 ext_te_gpio; + } dsi; + + struct { + enum omap_dss_venc_type type; + bool invert_polarity; + } venc; + } phy; + + struct { + struct omap_video_timings timings; + + int acbi; /* ac-bias pin transitions per interrupt */ + /* Unit: line clocks */ + int acb; /* ac-bias pin frequency */ + + enum omap_panel_config config; + + u8 recommended_bpp; + + struct omap_dss_device *ctrl; + } panel; + + struct { + u8 pixel_size; + struct rfbi_timings rfbi_timings; + struct omap_dss_device *panel; + } ctrl; + + int reset_gpio; + + int max_backlight_level; + + const char *name; + + /* used to match device to driver */ + const char *driver_name; + + void *data; + + struct omap_dss_driver *driver; + + /* helper variable for driver suspend/resume */ + bool activate_after_resume; + + enum omap_display_caps caps; + + struct omap_overlay_manager *manager; + + enum omap_dss_display_state state; + + int (*enable)(struct omap_dss_device *dssdev); + void (*disable)(struct omap_dss_device *dssdev); + + int (*suspend)(struct omap_dss_device *dssdev); + int (*resume)(struct omap_dss_device *dssdev); + + void (*get_resolution)(struct omap_dss_device *dssdev, + u16 *xres, u16 *yres); + int (*get_recommended_bpp)(struct omap_dss_device *dssdev); + + int (*check_timings)(struct omap_dss_device *dssdev, + struct omap_video_timings *timings); + void (*set_timings)(struct omap_dss_device *dssdev, + struct omap_video_timings *timings); + void (*get_timings)(struct omap_dss_device *dssdev, + struct omap_video_timings *timings); + int (*update)(struct omap_dss_device *dssdev, + u16 x, u16 y, u16 w, u16 h); + int (*sync)(struct omap_dss_device *dssdev); + int (*wait_vsync)(struct omap_dss_device *dssdev); + + int (*set_update_mode)(struct omap_dss_device *dssdev, + enum omap_dss_update_mode); + enum omap_dss_update_mode (*get_update_mode) + (struct omap_dss_device *dssdev); + + int (*enable_te)(struct omap_dss_device *dssdev, bool enable); + int (*get_te)(struct omap_dss_device *dssdev); + + u8 (*get_rotate)(struct omap_dss_device *dssdev); + int (*set_rotate)(struct omap_dss_device *dssdev, u8 rotate); + + bool (*get_mirror)(struct omap_dss_device *dssdev); + int (*set_mirror)(struct omap_dss_device *dssdev, bool enable); + + int (*run_test)(struct omap_dss_device *dssdev, int test); + int (*memory_read)(struct omap_dss_device *dssdev, + void *buf, size_t size, + u16 x, u16 y, u16 w, u16 h); + + int (*set_wss)(struct omap_dss_device *dssdev, u32 wss); + u32 (*get_wss)(struct omap_dss_device *dssdev); + + /* platform specific */ + int (*platform_enable)(struct omap_dss_device *dssdev); + void (*platform_disable)(struct omap_dss_device *dssdev); + int (*set_backlight)(struct omap_dss_device *dssdev, int level); + int (*get_backlight)(struct omap_dss_device *dssdev); +}; + +struct omap_dss_driver { + struct device_driver driver; + + int (*probe)(struct omap_dss_device *); + void (*remove)(struct omap_dss_device *); + + int (*enable)(struct omap_dss_device *display); + void (*disable)(struct omap_dss_device *display); + int (*suspend)(struct omap_dss_device *display); + int (*resume)(struct omap_dss_device *display); + int (*run_test)(struct omap_dss_device *display, int test); + + void (*setup_update)(struct omap_dss_device *dssdev, + u16 x, u16 y, u16 w, u16 h); + + int (*enable_te)(struct omap_dss_device *dssdev, bool enable); + int (*wait_for_te)(struct omap_dss_device *dssdev); + + u8 (*get_rotate)(struct omap_dss_device *dssdev); + int (*set_rotate)(struct omap_dss_device *dssdev, u8 rotate); + + bool (*get_mirror)(struct omap_dss_device *dssdev); + int (*set_mirror)(struct omap_dss_device *dssdev, bool enable); + + int (*memory_read)(struct omap_dss_device *dssdev, + void *buf, size_t size, + u16 x, u16 y, u16 w, u16 h); +}; + +int omap_dss_register_driver(struct omap_dss_driver *); +void omap_dss_unregister_driver(struct omap_dss_driver *); + +int omap_dss_register_device(struct omap_dss_device *); +void omap_dss_unregister_device(struct omap_dss_device *); + +void omap_dss_get_device(struct omap_dss_device *dssdev); +void omap_dss_put_device(struct omap_dss_device *dssdev); +#define for_each_dss_dev(d) while ((d = omap_dss_get_next_device(d)) != NULL) +struct omap_dss_device *omap_dss_get_next_device(struct omap_dss_device *from); +struct omap_dss_device *omap_dss_find_device(void *data, + int (*match)(struct omap_dss_device *dssdev, void *data)); + +int omap_dss_start_device(struct omap_dss_device *dssdev); +void omap_dss_stop_device(struct omap_dss_device *dssdev); + +int omap_dss_get_num_overlay_managers(void); +struct omap_overlay_manager *omap_dss_get_overlay_manager(int num); + +int omap_dss_get_num_overlays(void); +struct omap_overlay *omap_dss_get_overlay(int num); + +typedef void (*omap_dispc_isr_t) (void *arg, u32 mask); +int omap_dispc_register_isr(omap_dispc_isr_t isr, void *arg, u32 mask); +int omap_dispc_unregister_isr(omap_dispc_isr_t isr, void *arg, u32 mask); + +int omap_dispc_wait_for_irq_timeout(u32 irqmask, unsigned long timeout); +int omap_dispc_wait_for_irq_interruptible_timeout(u32 irqmask, + unsigned long timeout); + +#define to_dss_driver(x) container_of((x), struct omap_dss_driver, driver) +#define to_dss_device(x) container_of((x), struct omap_dss_device, dev) + +#endif diff --git a/arch/arm/plat-omap/include/plat/omap16xx.h b/arch/arm/plat-omap/include/plat/omap16xx.h index 0e69b504c25..7560b4d583a 100644 --- a/arch/arm/plat-omap/include/plat/omap16xx.h +++ b/arch/arm/plat-omap/include/plat/omap16xx.h @@ -124,7 +124,7 @@ #define TIPB_SWITCH_BASE (0xfffbc800) #define OMAP16XX_MMCSD2_SSW_MPU_CONF (TIPB_SWITCH_BASE + 0x160) -/* UART3 Registers Maping through MPU bus */ +/* UART3 Registers Mapping through MPU bus */ #define UART3_RHR (OMAP_UART3_BASE + 0) #define UART3_THR (OMAP_UART3_BASE + 0) #define UART3_DLL (OMAP_UART3_BASE + 0) diff --git a/arch/arm/plat-omap/include/plat/omapfb.h b/arch/arm/plat-omap/include/plat/omapfb.h deleted file mode 100644 index bfef7ab95f1..00000000000 --- a/arch/arm/plat-omap/include/plat/omapfb.h +++ /dev/null @@ -1,398 +0,0 @@ -/* - * File: arch/arm/plat-omap/include/mach/omapfb.h - * - * Framebuffer driver for TI OMAP boards - * - * Copyright (C) 2004 Nokia Corporation - * Author: Imre Deak <imre.deak@nokia.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - */ - -#ifndef __OMAPFB_H -#define __OMAPFB_H - -#include <asm/ioctl.h> -#include <asm/types.h> - -/* IOCTL commands. */ - -#define OMAP_IOW(num, dtype) _IOW('O', num, dtype) -#define OMAP_IOR(num, dtype) _IOR('O', num, dtype) -#define OMAP_IOWR(num, dtype) _IOWR('O', num, dtype) -#define OMAP_IO(num) _IO('O', num) - -#define OMAPFB_MIRROR OMAP_IOW(31, int) -#define OMAPFB_SYNC_GFX OMAP_IO(37) -#define OMAPFB_VSYNC OMAP_IO(38) -#define OMAPFB_SET_UPDATE_MODE OMAP_IOW(40, int) -#define OMAPFB_GET_CAPS OMAP_IOR(42, struct omapfb_caps) -#define OMAPFB_GET_UPDATE_MODE OMAP_IOW(43, int) -#define OMAPFB_LCD_TEST OMAP_IOW(45, int) -#define OMAPFB_CTRL_TEST OMAP_IOW(46, int) -#define OMAPFB_UPDATE_WINDOW_OLD OMAP_IOW(47, struct omapfb_update_window_old) -#define OMAPFB_SET_COLOR_KEY OMAP_IOW(50, struct omapfb_color_key) -#define OMAPFB_GET_COLOR_KEY OMAP_IOW(51, struct omapfb_color_key) -#define OMAPFB_SETUP_PLANE OMAP_IOW(52, struct omapfb_plane_info) -#define OMAPFB_QUERY_PLANE OMAP_IOW(53, struct omapfb_plane_info) -#define OMAPFB_UPDATE_WINDOW OMAP_IOW(54, struct omapfb_update_window) -#define OMAPFB_SETUP_MEM OMAP_IOW(55, struct omapfb_mem_info) -#define OMAPFB_QUERY_MEM OMAP_IOW(56, struct omapfb_mem_info) - -#define OMAPFB_CAPS_GENERIC_MASK 0x00000fff -#define OMAPFB_CAPS_LCDC_MASK 0x00fff000 -#define OMAPFB_CAPS_PANEL_MASK 0xff000000 - -#define OMAPFB_CAPS_MANUAL_UPDATE 0x00001000 -#define OMAPFB_CAPS_TEARSYNC 0x00002000 -#define OMAPFB_CAPS_PLANE_RELOCATE_MEM 0x00004000 -#define OMAPFB_CAPS_PLANE_SCALE 0x00008000 -#define OMAPFB_CAPS_WINDOW_PIXEL_DOUBLE 0x00010000 -#define OMAPFB_CAPS_WINDOW_SCALE 0x00020000 -#define OMAPFB_CAPS_WINDOW_OVERLAY 0x00040000 -#define OMAPFB_CAPS_WINDOW_ROTATE 0x00080000 -#define OMAPFB_CAPS_SET_BACKLIGHT 0x01000000 - -/* Values from DSP must map to lower 16-bits */ -#define OMAPFB_FORMAT_MASK 0x00ff -#define OMAPFB_FORMAT_FLAG_DOUBLE 0x0100 -#define OMAPFB_FORMAT_FLAG_TEARSYNC 0x0200 -#define OMAPFB_FORMAT_FLAG_FORCE_VSYNC 0x0400 -#define OMAPFB_FORMAT_FLAG_ENABLE_OVERLAY 0x0800 -#define OMAPFB_FORMAT_FLAG_DISABLE_OVERLAY 0x1000 - -#define OMAPFB_EVENT_READY 1 -#define OMAPFB_EVENT_DISABLED 2 - -#define OMAPFB_MEMTYPE_SDRAM 0 -#define OMAPFB_MEMTYPE_SRAM 1 -#define OMAPFB_MEMTYPE_MAX 1 - -enum omapfb_color_format { - OMAPFB_COLOR_RGB565 = 0, - OMAPFB_COLOR_YUV422, - OMAPFB_COLOR_YUV420, - OMAPFB_COLOR_CLUT_8BPP, - OMAPFB_COLOR_CLUT_4BPP, - OMAPFB_COLOR_CLUT_2BPP, - OMAPFB_COLOR_CLUT_1BPP, - OMAPFB_COLOR_RGB444, - OMAPFB_COLOR_YUY422, -}; - -struct omapfb_update_window { - __u32 x, y; - __u32 width, height; - __u32 format; - __u32 out_x, out_y; - __u32 out_width, out_height; - __u32 reserved[8]; -}; - -struct omapfb_update_window_old { - __u32 x, y; - __u32 width, height; - __u32 format; -}; - -enum omapfb_plane { - OMAPFB_PLANE_GFX = 0, - OMAPFB_PLANE_VID1, - OMAPFB_PLANE_VID2, -}; - -enum omapfb_channel_out { - OMAPFB_CHANNEL_OUT_LCD = 0, - OMAPFB_CHANNEL_OUT_DIGIT, -}; - -struct omapfb_plane_info { - __u32 pos_x; - __u32 pos_y; - __u8 enabled; - __u8 channel_out; - __u8 mirror; - __u8 reserved1; - __u32 out_width; - __u32 out_height; - __u32 reserved2[12]; -}; - -struct omapfb_mem_info { - __u32 size; - __u8 type; - __u8 reserved[3]; -}; - -struct omapfb_caps { - __u32 ctrl; - __u32 plane_color; - __u32 wnd_color; -}; - -enum omapfb_color_key_type { - OMAPFB_COLOR_KEY_DISABLED = 0, - OMAPFB_COLOR_KEY_GFX_DST, - OMAPFB_COLOR_KEY_VID_SRC, -}; - -struct omapfb_color_key { - __u8 channel_out; - __u32 background; - __u32 trans_key; - __u8 key_type; -}; - -enum omapfb_update_mode { - OMAPFB_UPDATE_DISABLED = 0, - OMAPFB_AUTO_UPDATE, - OMAPFB_MANUAL_UPDATE -}; - -#ifdef __KERNEL__ - -#include <linux/completion.h> -#include <linux/interrupt.h> -#include <linux/fb.h> -#include <linux/mutex.h> - -#include <plat/board.h> - -#define OMAP_LCDC_INV_VSYNC 0x0001 -#define OMAP_LCDC_INV_HSYNC 0x0002 -#define OMAP_LCDC_INV_PIX_CLOCK 0x0004 -#define OMAP_LCDC_INV_OUTPUT_EN 0x0008 -#define OMAP_LCDC_HSVS_RISING_EDGE 0x0010 -#define OMAP_LCDC_HSVS_OPPOSITE 0x0020 - -#define OMAP_LCDC_SIGNAL_MASK 0x003f - -#define OMAP_LCDC_PANEL_TFT 0x0100 - -#define OMAPFB_PLANE_XRES_MIN 8 -#define OMAPFB_PLANE_YRES_MIN 8 - -#ifdef CONFIG_ARCH_OMAP1 -#define OMAPFB_PLANE_NUM 1 -#else -#define OMAPFB_PLANE_NUM 3 -#endif - -struct omapfb_device; - -struct lcd_panel { - const char *name; - int config; /* TFT/STN, signal inversion */ - int bpp; /* Pixel format in fb mem */ - int data_lines; /* Lines on LCD HW interface */ - - int x_res, y_res; - int pixel_clock; /* In kHz */ - int hsw; /* Horizontal synchronization - pulse width */ - int hfp; /* Horizontal front porch */ - int hbp; /* Horizontal back porch */ - int vsw; /* Vertical synchronization - pulse width */ - int vfp; /* Vertical front porch */ - int vbp; /* Vertical back porch */ - int acb; /* ac-bias pin frequency */ - int pcd; /* pixel clock divider. - Obsolete use pixel_clock instead */ - - int (*init) (struct lcd_panel *panel, - struct omapfb_device *fbdev); - void (*cleanup) (struct lcd_panel *panel); - int (*enable) (struct lcd_panel *panel); - void (*disable) (struct lcd_panel *panel); - unsigned long (*get_caps) (struct lcd_panel *panel); - int (*set_bklight_level)(struct lcd_panel *panel, - unsigned int level); - unsigned int (*get_bklight_level)(struct lcd_panel *panel); - unsigned int (*get_bklight_max) (struct lcd_panel *panel); - int (*run_test) (struct lcd_panel *panel, int test_num); -}; - -struct extif_timings { - int cs_on_time; - int cs_off_time; - int we_on_time; - int we_off_time; - int re_on_time; - int re_off_time; - int we_cycle_time; - int re_cycle_time; - int cs_pulse_width; - int access_time; - - int clk_div; - - u32 tim[5]; /* set by extif->convert_timings */ - - int converted; -}; - -struct lcd_ctrl_extif { - int (*init) (struct omapfb_device *fbdev); - void (*cleanup) (void); - void (*get_clk_info) (u32 *clk_period, u32 *max_clk_div); - unsigned long (*get_max_tx_rate)(void); - int (*convert_timings) (struct extif_timings *timings); - void (*set_timings) (const struct extif_timings *timings); - void (*set_bits_per_cycle)(int bpc); - void (*write_command) (const void *buf, unsigned int len); - void (*read_data) (void *buf, unsigned int len); - void (*write_data) (const void *buf, unsigned int len); - void (*transfer_area) (int width, int height, - void (callback)(void * data), void *data); - int (*setup_tearsync) (unsigned pin_cnt, - unsigned hs_pulse_time, unsigned vs_pulse_time, - int hs_pol_inv, int vs_pol_inv, int div); - int (*enable_tearsync) (int enable, unsigned line); - - unsigned long max_transmit_size; -}; - -struct omapfb_notifier_block { - struct notifier_block nb; - void *data; - int plane_idx; -}; - -typedef int (*omapfb_notifier_callback_t)(struct notifier_block *, - unsigned long event, - void *fbi); - -struct omapfb_mem_region { - u32 paddr; - void __iomem *vaddr; - unsigned long size; - u8 type; /* OMAPFB_PLANE_MEM_* */ - unsigned alloc:1; /* allocated by the driver */ - unsigned map:1; /* kernel mapped by the driver */ -}; - -struct omapfb_mem_desc { - int region_cnt; - struct omapfb_mem_region region[OMAPFB_PLANE_NUM]; -}; - -struct lcd_ctrl { - const char *name; - void *data; - - int (*init) (struct omapfb_device *fbdev, - int ext_mode, - struct omapfb_mem_desc *req_md); - void (*cleanup) (void); - void (*bind_client) (struct omapfb_notifier_block *nb); - void (*get_caps) (int plane, struct omapfb_caps *caps); - int (*set_update_mode)(enum omapfb_update_mode mode); - enum omapfb_update_mode (*get_update_mode)(void); - int (*setup_plane) (int plane, int channel_out, - unsigned long offset, - int screen_width, - int pos_x, int pos_y, int width, - int height, int color_mode); - int (*set_rotate) (int angle); - int (*setup_mem) (int plane, size_t size, - int mem_type, unsigned long *paddr); - int (*mmap) (struct fb_info *info, - struct vm_area_struct *vma); - int (*set_scale) (int plane, - int orig_width, int orig_height, - int out_width, int out_height); - int (*enable_plane) (int plane, int enable); - int (*update_window) (struct fb_info *fbi, - struct omapfb_update_window *win, - void (*callback)(void *), - void *callback_data); - void (*sync) (void); - void (*suspend) (void); - void (*resume) (void); - int (*run_test) (int test_num); - int (*setcolreg) (u_int regno, u16 red, u16 green, - u16 blue, u16 transp, - int update_hw_mem); - int (*set_color_key) (struct omapfb_color_key *ck); - int (*get_color_key) (struct omapfb_color_key *ck); -}; - -enum omapfb_state { - OMAPFB_DISABLED = 0, - OMAPFB_SUSPENDED= 99, - OMAPFB_ACTIVE = 100 -}; - -struct omapfb_plane_struct { - int idx; - struct omapfb_plane_info info; - enum omapfb_color_format color_mode; - struct omapfb_device *fbdev; -}; - -struct omapfb_device { - int state; - int ext_lcdc; /* Using external - LCD controller */ - struct mutex rqueue_mutex; - - int palette_size; - u32 pseudo_palette[17]; - - struct lcd_panel *panel; /* LCD panel */ - const struct lcd_ctrl *ctrl; /* LCD controller */ - const struct lcd_ctrl *int_ctrl; /* internal LCD ctrl */ - struct lcd_ctrl_extif *ext_if; /* LCD ctrl external - interface */ - struct device *dev; - struct fb_var_screeninfo new_var; /* for mode changes */ - - struct omapfb_mem_desc mem_desc; - struct fb_info *fb_info[OMAPFB_PLANE_NUM]; -}; - -struct omapfb_platform_data { - struct omap_lcd_config lcd; - struct omapfb_mem_desc mem_desc; - void *ctrl_platform_data; -}; - -#ifdef CONFIG_ARCH_OMAP1 -extern struct lcd_ctrl omap1_lcd_ctrl; -#else -extern struct lcd_ctrl omap2_disp_ctrl; -#endif - -extern void omapfb_reserve_sdram(void); -extern void omapfb_register_panel(struct lcd_panel *panel); -extern void omapfb_write_first_pixel(struct omapfb_device *fbdev, u16 pixval); -extern void omapfb_notify_clients(struct omapfb_device *fbdev, - unsigned long event); -extern int omapfb_register_client(struct omapfb_notifier_block *nb, - omapfb_notifier_callback_t callback, - void *callback_data); -extern int omapfb_unregister_client(struct omapfb_notifier_block *nb); -extern int omapfb_update_window_async(struct fb_info *fbi, - struct omapfb_update_window *win, - void (*callback)(void *), - void *callback_data); - -/* in arch/arm/plat-omap/fb.c */ -extern void omapfb_set_ctrl_platform_data(void *pdata); - -#endif /* __KERNEL__ */ - -#endif /* __OMAPFB_H */ diff --git a/arch/arm/plat-omap/include/plat/sdrc.h b/arch/arm/plat-omap/include/plat/sdrc.h index f704030d2a7..7b76f50564b 100644 --- a/arch/arm/plat-omap/include/plat/sdrc.h +++ b/arch/arm/plat-omap/include/plat/sdrc.h @@ -94,7 +94,10 @@ /* SMS register offsets - read/write with sms_{read,write}_reg() */ -#define SMS_SYSCONFIG 0x010 +#define SMS_SYSCONFIG 0x010 +#define SMS_ROT_CONTROL(context) (0x180 + 0x10 * context) +#define SMS_ROT_SIZE(context) (0x184 + 0x10 * context) +#define SMS_ROT_PHYSICAL_BA(context) (0x188 + 0x10 * context) /* REVISIT: fill in other SMS registers here */ @@ -129,6 +132,10 @@ int omap2_sdrc_get_params(unsigned long r, void omap2_sms_save_context(void); void omap2_sms_restore_context(void); +void omap2_sms_write_rot_control(u32 val, unsigned ctx); +void omap2_sms_write_rot_size(u32 val, unsigned ctx); +void omap2_sms_write_rot_physical_ba(u32 val, unsigned ctx); + #ifdef CONFIG_ARCH_OMAP2 struct memory_timings { diff --git a/arch/arm/plat-omap/include/plat/vram.h b/arch/arm/plat-omap/include/plat/vram.h new file mode 100644 index 00000000000..edd4987758a --- /dev/null +++ b/arch/arm/plat-omap/include/plat/vram.h @@ -0,0 +1,62 @@ +/* + * VRAM manager for OMAP + * + * Copyright (C) 2009 Nokia Corporation + * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef __OMAP_VRAM_H__ +#define __OMAP_VRAM_H__ + +#include <linux/types.h> + +#define OMAP_VRAM_MEMTYPE_SDRAM 0 +#define OMAP_VRAM_MEMTYPE_SRAM 1 +#define OMAP_VRAM_MEMTYPE_MAX 1 + +extern int omap_vram_add_region(unsigned long paddr, size_t size); +extern int omap_vram_free(unsigned long paddr, size_t size); +extern int omap_vram_alloc(int mtype, size_t size, unsigned long *paddr); +extern int omap_vram_reserve(unsigned long paddr, size_t size); +extern void omap_vram_get_info(unsigned long *vram, unsigned long *free_vram, + unsigned long *largest_free_block); + +#ifdef CONFIG_OMAP2_VRAM +extern void omap_vram_set_sdram_vram(u32 size, u32 start); +extern void omap_vram_set_sram_vram(u32 size, u32 start); + +extern void omap_vram_reserve_sdram(void); +extern unsigned long omap_vram_reserve_sram(unsigned long sram_pstart, + unsigned long sram_vstart, + unsigned long sram_size, + unsigned long pstart_avail, + unsigned long size_avail); +#else +static inline void omap_vram_set_sdram_vram(u32 size, u32 start) { } +static inline void omap_vram_set_sram_vram(u32 size, u32 start) { } + +static inline void omap_vram_reserve_sdram(void) { } +static inline unsigned long omap_vram_reserve_sram(unsigned long sram_pstart, + unsigned long sram_vstart, + unsigned long sram_size, + unsigned long pstart_avail, + unsigned long size_avail) +{ + return 0; +} +#endif + +#endif diff --git a/arch/arm/plat-omap/include/plat/vrfb.h b/arch/arm/plat-omap/include/plat/vrfb.h new file mode 100644 index 00000000000..d8a03ced3b1 --- /dev/null +++ b/arch/arm/plat-omap/include/plat/vrfb.h @@ -0,0 +1,50 @@ +/* + * VRFB Rotation Engine + * + * Copyright (C) 2009 Nokia Corporation + * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef __OMAP_VRFB_H__ +#define __OMAP_VRFB_H__ + +#define OMAP_VRFB_LINE_LEN 2048 + +struct vrfb { + u8 context; + void __iomem *vaddr[4]; + unsigned long paddr[4]; + u16 xres; + u16 yres; + u16 xoffset; + u16 yoffset; + u8 bytespp; + bool yuv_mode; +}; + +extern int omap_vrfb_request_ctx(struct vrfb *vrfb); +extern void omap_vrfb_release_ctx(struct vrfb *vrfb); +extern void omap_vrfb_adjust_size(u16 *width, u16 *height, + u8 bytespp); +extern u32 omap_vrfb_min_phys_size(u16 width, u16 height, u8 bytespp); +extern u16 omap_vrfb_max_height(u32 phys_size, u16 width, u8 bytespp); +extern void omap_vrfb_setup(struct vrfb *vrfb, unsigned long paddr, + u16 width, u16 height, + unsigned bytespp, bool yuv_mode); +extern int omap_vrfb_map_angle(struct vrfb *vrfb, u16 height, u8 rot); +extern void omap_vrfb_restore_context(void); + +#endif /* __VRFB_H */ diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c index 3e923668778..ad2bf07d30b 100644 --- a/arch/arm/plat-omap/sram.c +++ b/arch/arm/plat-omap/sram.c @@ -28,6 +28,7 @@ #include <plat/sram.h> #include <plat/board.h> #include <plat/cpu.h> +#include <plat/vram.h> #include <plat/control.h> @@ -185,6 +186,13 @@ void __init omap_detect_sram(void) omap_sram_start + SRAM_BOOTLOADER_SZ, omap_sram_size - SRAM_BOOTLOADER_SZ); omap_sram_size -= reserved; + + reserved = omap_vram_reserve_sram(omap_sram_start, omap_sram_base, + omap_sram_size, + omap_sram_start + SRAM_BOOTLOADER_SZ, + omap_sram_size - SRAM_BOOTLOADER_SZ); + omap_sram_size -= reserved; + omap_sram_ceil = omap_sram_base + omap_sram_size; } diff --git a/arch/arm/plat-s3c/Kconfig b/arch/arm/plat-s3c/Kconfig index e139a72c214..9e9d0286e48 100644 --- a/arch/arm/plat-s3c/Kconfig +++ b/arch/arm/plat-s3c/Kconfig @@ -1,5 +1,3 @@ -# arch/arm/plat-s3c/Kconfig -# # Copyright 2007 Simtec Electronics # # Licensed under GPLv2 diff --git a/arch/arm/plat-s3c/pwm.c b/arch/arm/plat-s3c/pwm.c index 4fdc5b307fd..ef019f27b67 100644 --- a/arch/arm/plat-s3c/pwm.c +++ b/arch/arm/plat-s3c/pwm.c @@ -368,7 +368,7 @@ static int s3c_pwm_probe(struct platform_device *pdev) return ret; } -static int s3c_pwm_remove(struct platform_device *pdev) +static int __devexit s3c_pwm_remove(struct platform_device *pdev) { struct pwm_device *pwm = platform_get_drvdata(pdev); diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig index 20fbf936bb9..342647eb91d 100644 --- a/arch/arm/plat-s3c24xx/Kconfig +++ b/arch/arm/plat-s3c24xx/Kconfig @@ -1,5 +1,3 @@ -# arch/arm/plat-s3c24xx/Kconfig -# # Copyright 2007 Simtec Electronics # # Licensed under GPLv2 diff --git a/arch/arm/plat-s3c24xx/adc.c b/arch/arm/plat-s3c24xx/adc.c index df47322492d..ce47627f336 100644 --- a/arch/arm/plat-s3c24xx/adc.c +++ b/arch/arm/plat-s3c24xx/adc.c @@ -365,7 +365,7 @@ static int s3c_adc_probe(struct platform_device *pdev) return ret; } -static int s3c_adc_remove(struct platform_device *pdev) +static int __devexit s3c_adc_remove(struct platform_device *pdev) { struct adc_device *adc = platform_get_drvdata(pdev); diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c index f65192d5b1d..f0ea7943ac5 100644 --- a/arch/arm/plat-s3c24xx/dma.c +++ b/arch/arm/plat-s3c24xx/dma.c @@ -1403,11 +1403,13 @@ static struct s3c2410_dma_chan *s3c2410_dma_map_channel(int channel) ord = &dma_order->channels[channel]; for (ch = 0; ch < dma_channels; ch++) { + int tmp; if (!is_channel_valid(ord->list[ch])) continue; - if (s3c2410_chans[ord->list[ch]].in_use == 0) { - ch = ord->list[ch] & ~DMA_CH_VALID; + tmp = ord->list[ch] & ~DMA_CH_VALID; + if (s3c2410_chans[tmp].in_use == 0) { + ch = tmp; goto found; } } diff --git a/arch/arm/plat-s3c24xx/include/plat/map.h b/arch/arm/plat-s3c24xx/include/plat/map.h index c4d133436fc..bd534d32b99 100644 --- a/arch/arm/plat-s3c24xx/include/plat/map.h +++ b/arch/arm/plat-s3c24xx/include/plat/map.h @@ -64,7 +64,7 @@ /* the calculation for the VA of this must ensure that * it is the same distance apart from the UART in the * phsyical address space, as the initial mapping for the IO - * is done as a 1:1 maping. This puts it (currently) at + * is done as a 1:1 mapping. This puts it (currently) at * 0xFA800000, which is not in the way of any current mapping * by the base system. */ diff --git a/arch/arm/plat-s3c24xx/irq.c b/arch/arm/plat-s3c24xx/irq.c index ef0f521437d..ad0d44ef1f9 100644 --- a/arch/arm/plat-s3c24xx/irq.c +++ b/arch/arm/plat-s3c24xx/irq.c @@ -522,6 +522,8 @@ int s3c24xx_set_fiq(unsigned int irq, bool on) __raw_writel(intmod, S3C2410_INTMOD); return 0; } + +EXPORT_SYMBOL_GPL(s3c24xx_set_fiq); #endif diff --git a/arch/arm/plat-s3c64xx/Kconfig b/arch/arm/plat-s3c64xx/Kconfig index bcfa778614d..e6da87a5885 100644 --- a/arch/arm/plat-s3c64xx/Kconfig +++ b/arch/arm/plat-s3c64xx/Kconfig @@ -1,5 +1,3 @@ -# arch/arm/plat-s3c64xx/Kconfig -# # Copyright 2008 Openmoko, Inc. # Copyright 2008 Simtec Electronics # Ben Dooks <ben@simtec.co.uk> diff --git a/arch/arm/plat-s5pc1xx/Kconfig b/arch/arm/plat-s5pc1xx/Kconfig index 1608e62b0c9..b7b9e91c024 100644 --- a/arch/arm/plat-s5pc1xx/Kconfig +++ b/arch/arm/plat-s5pc1xx/Kconfig @@ -1,5 +1,3 @@ -# arch/arm/plat-s5pc1xx/Kconfig -# # Copyright 2009 Samsung Electronics Co. # Byungho Min <bhmin@samsung.com> # |