diff options
Diffstat (limited to 'arch/arm/mach-omap1/include')
| -rw-r--r-- | arch/arm/mach-omap1/include/mach/ams-delta-fiq.h | 2 | ||||
| -rw-r--r-- | arch/arm/mach-omap1/include/mach/board-ams-delta.h | 71 | ||||
| -rw-r--r-- | arch/arm/mach-omap1/include/mach/board-sx1.h | 52 | ||||
| -rw-r--r-- | arch/arm/mach-omap1/include/mach/board-voiceblue.h | 19 | ||||
| -rw-r--r-- | arch/arm/mach-omap1/include/mach/flash.h | 17 | ||||
| -rw-r--r-- | arch/arm/mach-omap1/include/mach/gpio.h | 2 | ||||
| -rw-r--r-- | arch/arm/mach-omap1/include/mach/hardware.h | 285 | ||||
| -rw-r--r-- | arch/arm/mach-omap1/include/mach/irda.h | 33 | ||||
| -rw-r--r-- | arch/arm/mach-omap1/include/mach/irqs.h | 267 | ||||
| -rw-r--r-- | arch/arm/mach-omap1/include/mach/mux.h | 454 | ||||
| -rw-r--r-- | arch/arm/mach-omap1/include/mach/omap1510.h | 49 | ||||
| -rw-r--r-- | arch/arm/mach-omap1/include/mach/omap16xx.h | 201 | ||||
| -rw-r--r-- | arch/arm/mach-omap1/include/mach/omap7xx.h | 106 | ||||
| -rw-r--r-- | arch/arm/mach-omap1/include/mach/smp.h | 5 |
14 files changed, 1548 insertions, 15 deletions
diff --git a/arch/arm/mach-omap1/include/mach/ams-delta-fiq.h b/arch/arm/mach-omap1/include/mach/ams-delta-fiq.h index 23eed0035ed..adb5e764965 100644 --- a/arch/arm/mach-omap1/include/mach/ams-delta-fiq.h +++ b/arch/arm/mach-omap1/include/mach/ams-delta-fiq.h @@ -14,8 +14,6 @@ #ifndef __AMS_DELTA_FIQ_H #define __AMS_DELTA_FIQ_H -#include <plat/irqs.h> - /* * Interrupt number used for passing control from FIQ to IRQ. * IRQ12, described as reserved, has been selected. diff --git a/arch/arm/mach-omap1/include/mach/board-ams-delta.h b/arch/arm/mach-omap1/include/mach/board-ams-delta.h new file mode 100644 index 00000000000..ad6f865d1f1 --- /dev/null +++ b/arch/arm/mach-omap1/include/mach/board-ams-delta.h @@ -0,0 +1,71 @@ +/* + * arch/arm/plat-omap/include/mach/board-ams-delta.h + * + * Copyright (C) 2006 Jonathan McDowell <noodles@earth.li> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ +#ifndef __ASM_ARCH_OMAP_AMS_DELTA_H +#define __ASM_ARCH_OMAP_AMS_DELTA_H + +#if defined (CONFIG_MACH_AMS_DELTA) + +#define AMD_DELTA_LATCH2_SCARD_RSTIN 0x0400 +#define AMD_DELTA_LATCH2_SCARD_CMDVCC 0x0800 +#define AMS_DELTA_LATCH2_MODEM_CODEC 0x2000 + +#define AMS_DELTA_GPIO_PIN_KEYBRD_DATA 0 +#define AMS_DELTA_GPIO_PIN_KEYBRD_CLK 1 +#define AMS_DELTA_GPIO_PIN_MODEM_IRQ 2 +#define AMS_DELTA_GPIO_PIN_HOOK_SWITCH 4 +#define AMS_DELTA_GPIO_PIN_SCARD_NOFF 6 +#define AMS_DELTA_GPIO_PIN_SCARD_IO 7 +#define AMS_DELTA_GPIO_PIN_CONFIG 11 +#define AMS_DELTA_GPIO_PIN_NAND_RB 12 + +#define AMS_DELTA_GPIO_PIN_LCD_VBLEN 240 +#define AMS_DELTA_GPIO_PIN_LCD_NDISP 241 +#define AMS_DELTA_GPIO_PIN_NAND_NCE 242 +#define AMS_DELTA_GPIO_PIN_NAND_NRE 243 +#define AMS_DELTA_GPIO_PIN_NAND_NWP 244 +#define AMS_DELTA_GPIO_PIN_NAND_NWE 245 +#define AMS_DELTA_GPIO_PIN_NAND_ALE 246 +#define AMS_DELTA_GPIO_PIN_NAND_CLE 247 +#define AMS_DELTA_GPIO_PIN_KEYBRD_PWR 248 +#define AMS_DELTA_GPIO_PIN_KEYBRD_DATAOUT 249 +#define AMS_DELTA_GPIO_PIN_SCARD_RSTIN 250 +#define AMS_DELTA_GPIO_PIN_SCARD_CMDVCC 251 +#define AMS_DELTA_GPIO_PIN_MODEM_NRESET 252 +#define AMS_DELTA_GPIO_PIN_MODEM_CODEC 253 + +#define AMS_DELTA_LATCH2_GPIO_BASE AMS_DELTA_GPIO_PIN_LCD_VBLEN +#define AMS_DELTA_LATCH2_NGPIO 16 + +#ifndef __ASSEMBLY__ +void ams_delta_latch_write(int base, int ngpio, u16 mask, u16 value); +#define ams_delta_latch2_write(mask, value) \ + ams_delta_latch_write(AMS_DELTA_LATCH2_GPIO_BASE, \ + AMS_DELTA_LATCH2_NGPIO, (mask), (value)) +#endif + +#endif /* CONFIG_MACH_AMS_DELTA */ + +#endif /* __ASM_ARCH_OMAP_AMS_DELTA_H */ diff --git a/arch/arm/mach-omap1/include/mach/board-sx1.h b/arch/arm/mach-omap1/include/mach/board-sx1.h new file mode 100644 index 00000000000..355adbdaae3 --- /dev/null +++ b/arch/arm/mach-omap1/include/mach/board-sx1.h @@ -0,0 +1,52 @@ +/* + * Siemens SX1 board definitions + * + * Copyright: Vovan888 at gmail com + * + * This package is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED + * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE. + */ + +#ifndef __ASM_ARCH_SX1_I2C_CHIPS_H +#define __ASM_ARCH_SX1_I2C_CHIPS_H + +#define SOFIA_MAX_LIGHT_VAL 0x2B + +#define SOFIA_I2C_ADDR 0x32 +/* Sofia reg 3 bits masks */ +#define SOFIA_POWER1_REG 0x03 + +#define SOFIA_USB_POWER 0x01 +#define SOFIA_MMC_POWER 0x04 +#define SOFIA_BLUETOOTH_POWER 0x08 +#define SOFIA_MMILIGHT_POWER 0x20 + +#define SOFIA_POWER2_REG 0x04 +#define SOFIA_BACKLIGHT_REG 0x06 +#define SOFIA_KEYLIGHT_REG 0x07 +#define SOFIA_DIMMING_REG 0x09 + + +/* Function Prototypes for SX1 devices control on I2C bus */ + +int sx1_setbacklight(u8 backlight); +int sx1_getbacklight(u8 *backlight); +int sx1_setkeylight(u8 keylight); +int sx1_getkeylight(u8 *keylight); + +int sx1_setmmipower(u8 onoff); +int sx1_setusbpower(u8 onoff); +int sx1_i2c_read_byte(u8 devaddr, u8 regoffset, u8 *value); +int sx1_i2c_write_byte(u8 devaddr, u8 regoffset, u8 value); + +/* MMC prototypes */ + +extern void sx1_mmc_init(void); +extern void sx1_mmc_slot_cover_handler(void *arg, int state); + +#endif /* __ASM_ARCH_SX1_I2C_CHIPS_H */ diff --git a/arch/arm/mach-omap1/include/mach/board-voiceblue.h b/arch/arm/mach-omap1/include/mach/board-voiceblue.h new file mode 100644 index 00000000000..27916b210f5 --- /dev/null +++ b/arch/arm/mach-omap1/include/mach/board-voiceblue.h @@ -0,0 +1,19 @@ +/* + * Copyright (C) 2004 2N Telekomunikace, Ladislav Michl <michl@2n.cz> + * + * Hardware definitions for OMAP5910 based VoiceBlue board. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_ARCH_VOICEBLUE_H +#define __ASM_ARCH_VOICEBLUE_H + +extern void voiceblue_wdt_enable(void); +extern void voiceblue_wdt_disable(void); +extern void voiceblue_wdt_ping(void); + +#endif /* __ASM_ARCH_VOICEBLUE_H */ + diff --git a/arch/arm/mach-omap1/include/mach/flash.h b/arch/arm/mach-omap1/include/mach/flash.h new file mode 100644 index 00000000000..0d88499b79e --- /dev/null +++ b/arch/arm/mach-omap1/include/mach/flash.h @@ -0,0 +1,17 @@ +/* + * Flash support for OMAP1 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __OMAP_FLASH_H +#define __OMAP_FLASH_H + +#include <linux/mtd/map.h> + +struct platform_device; +extern void omap1_set_vpp(struct platform_device *pdev, int enable); + +#endif diff --git a/arch/arm/mach-omap1/include/mach/gpio.h b/arch/arm/mach-omap1/include/mach/gpio.h index e737706a8fe..ebf86c0f4f4 100644 --- a/arch/arm/mach-omap1/include/mach/gpio.h +++ b/arch/arm/mach-omap1/include/mach/gpio.h @@ -1,5 +1,3 @@ /* * arch/arm/mach-omap1/include/mach/gpio.h */ - -#include <plat/gpio.h> diff --git a/arch/arm/mach-omap1/include/mach/hardware.h b/arch/arm/mach-omap1/include/mach/hardware.h index 01e35fa106b..84248d250ad 100644 --- a/arch/arm/mach-omap1/include/mach/hardware.h +++ b/arch/arm/mach-omap1/include/mach/hardware.h @@ -1,11 +1,46 @@ /* * arch/arm/mach-omap1/include/mach/hardware.h + * + * Hardware definitions for TI OMAP processors and boards + * + * NOTE: Please put device driver specific defines into a separate header + * file for each driver. + * + * Copyright (C) 2001 RidgeRun, Inc. + * Author: RidgeRun, Inc. Greg Lonnon <glonnon@ridgerun.com> + * + * Reorganized for Linux-2.6 by Tony Lindgren <tony@atomide.com> + * and Dirk Behme <dirk.behme@de.bosch.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. */ -#ifndef __MACH_HARDWARE_H -#define __MACH_HARDWARE_H +#ifndef __ASM_ARCH_OMAP_HARDWARE_H +#define __ASM_ARCH_OMAP_HARDWARE_H +#include <asm/sizes.h> #ifndef __ASSEMBLER__ +#include <asm/types.h> +#include <plat/cpu.h> + /* * NOTE: Please use ioremap + __raw_read/write where possible instead of these */ @@ -35,7 +70,249 @@ static inline u32 omap_cs3_phys(void) ? 0 : OMAP_CS3_PHYS; } +#endif /* ifndef __ASSEMBLER__ */ + +#include <plat/serial.h> + +/* + * --------------------------------------------------------------------------- + * Common definitions for all OMAP processors + * NOTE: Put all processor or board specific parts to the special header + * files. + * --------------------------------------------------------------------------- + */ + +/* + * ---------------------------------------------------------------------------- + * Timers + * ---------------------------------------------------------------------------- + */ +#define OMAP_MPU_TIMER1_BASE (0xfffec500) +#define OMAP_MPU_TIMER2_BASE (0xfffec600) +#define OMAP_MPU_TIMER3_BASE (0xfffec700) +#define MPU_TIMER_FREE (1 << 6) +#define MPU_TIMER_CLOCK_ENABLE (1 << 5) +#define MPU_TIMER_AR (1 << 1) +#define MPU_TIMER_ST (1 << 0) + +/* + * ---------------------------------------------------------------------------- + * Clocks + * ---------------------------------------------------------------------------- + */ +#define CLKGEN_REG_BASE (0xfffece00) +#define ARM_CKCTL (CLKGEN_REG_BASE + 0x0) +#define ARM_IDLECT1 (CLKGEN_REG_BASE + 0x4) +#define ARM_IDLECT2 (CLKGEN_REG_BASE + 0x8) +#define ARM_EWUPCT (CLKGEN_REG_BASE + 0xC) +#define ARM_RSTCT1 (CLKGEN_REG_BASE + 0x10) +#define ARM_RSTCT2 (CLKGEN_REG_BASE + 0x14) +#define ARM_SYSST (CLKGEN_REG_BASE + 0x18) +#define ARM_IDLECT3 (CLKGEN_REG_BASE + 0x24) + +#define CK_RATEF 1 +#define CK_IDLEF 2 +#define CK_ENABLEF 4 +#define CK_SELECTF 8 +#define SETARM_IDLE_SHIFT + +/* DPLL control registers */ +#define DPLL_CTL (0xfffecf00) + +/* DSP clock control. Must use __raw_readw() and __raw_writew() with these */ +#define DSP_CONFIG_REG_BASE IOMEM(0xe1008000) +#define DSP_CKCTL (DSP_CONFIG_REG_BASE + 0x0) +#define DSP_IDLECT1 (DSP_CONFIG_REG_BASE + 0x4) +#define DSP_IDLECT2 (DSP_CONFIG_REG_BASE + 0x8) +#define DSP_RSTCT2 (DSP_CONFIG_REG_BASE + 0x14) + +/* + * --------------------------------------------------------------------------- + * UPLD + * --------------------------------------------------------------------------- + */ +#define ULPD_REG_BASE (0xfffe0800) +#define ULPD_IT_STATUS (ULPD_REG_BASE + 0x14) +#define ULPD_SETUP_ANALOG_CELL_3 (ULPD_REG_BASE + 0x24) +#define ULPD_CLOCK_CTRL (ULPD_REG_BASE + 0x30) +# define DIS_USB_PVCI_CLK (1 << 5) /* no USB/FAC synch */ +# define USB_MCLK_EN (1 << 4) /* enable W4_USB_CLKO */ +#define ULPD_SOFT_REQ (ULPD_REG_BASE + 0x34) +# define SOFT_UDC_REQ (1 << 4) +# define SOFT_USB_CLK_REQ (1 << 3) +# define SOFT_DPLL_REQ (1 << 0) +#define ULPD_DPLL_CTRL (ULPD_REG_BASE + 0x3c) +#define ULPD_STATUS_REQ (ULPD_REG_BASE + 0x40) +#define ULPD_APLL_CTRL (ULPD_REG_BASE + 0x4c) +#define ULPD_POWER_CTRL (ULPD_REG_BASE + 0x50) +#define ULPD_SOFT_DISABLE_REQ_REG (ULPD_REG_BASE + 0x68) +# define DIS_MMC2_DPLL_REQ (1 << 11) +# define DIS_MMC1_DPLL_REQ (1 << 10) +# define DIS_UART3_DPLL_REQ (1 << 9) +# define DIS_UART2_DPLL_REQ (1 << 8) +# define DIS_UART1_DPLL_REQ (1 << 7) +# define DIS_USB_HOST_DPLL_REQ (1 << 6) +#define ULPD_SDW_CLK_DIV_CTRL_SEL (ULPD_REG_BASE + 0x74) +#define ULPD_CAM_CLK_CTRL (ULPD_REG_BASE + 0x7c) + +/* + * --------------------------------------------------------------------------- + * Watchdog timer + * --------------------------------------------------------------------------- + */ + +/* Watchdog timer within the OMAP3.2 gigacell */ +#define OMAP_MPU_WATCHDOG_BASE (0xfffec800) +#define OMAP_WDT_TIMER (OMAP_MPU_WATCHDOG_BASE + 0x0) +#define OMAP_WDT_LOAD_TIM (OMAP_MPU_WATCHDOG_BASE + 0x4) +#define OMAP_WDT_READ_TIM (OMAP_MPU_WATCHDOG_BASE + 0x4) +#define OMAP_WDT_TIMER_MODE (OMAP_MPU_WATCHDOG_BASE + 0x8) + +/* + * --------------------------------------------------------------------------- + * Interrupts + * --------------------------------------------------------------------------- + */ +#ifdef CONFIG_ARCH_OMAP1 + +/* + * XXX: These probably want to be moved to arch/arm/mach-omap/omap1/irq.c + * or something similar.. -- PFM. + */ + +#define OMAP_IH1_BASE 0xfffecb00 +#define OMAP_IH2_BASE 0xfffe0000 + +#define OMAP_IH1_ITR (OMAP_IH1_BASE + 0x00) +#define OMAP_IH1_MIR (OMAP_IH1_BASE + 0x04) +#define OMAP_IH1_SIR_IRQ (OMAP_IH1_BASE + 0x10) +#define OMAP_IH1_SIR_FIQ (OMAP_IH1_BASE + 0x14) +#define OMAP_IH1_CONTROL (OMAP_IH1_BASE + 0x18) +#define OMAP_IH1_ILR0 (OMAP_IH1_BASE + 0x1c) +#define OMAP_IH1_ISR (OMAP_IH1_BASE + 0x9c) + +#define OMAP_IH2_ITR (OMAP_IH2_BASE + 0x00) +#define OMAP_IH2_MIR (OMAP_IH2_BASE + 0x04) +#define OMAP_IH2_SIR_IRQ (OMAP_IH2_BASE + 0x10) +#define OMAP_IH2_SIR_FIQ (OMAP_IH2_BASE + 0x14) +#define OMAP_IH2_CONTROL (OMAP_IH2_BASE + 0x18) +#define OMAP_IH2_ILR0 (OMAP_IH2_BASE + 0x1c) +#define OMAP_IH2_ISR (OMAP_IH2_BASE + 0x9c) + +#define IRQ_ITR_REG_OFFSET 0x00 +#define IRQ_MIR_REG_OFFSET 0x04 +#define IRQ_SIR_IRQ_REG_OFFSET 0x10 +#define IRQ_SIR_FIQ_REG_OFFSET 0x14 +#define IRQ_CONTROL_REG_OFFSET 0x18 +#define IRQ_ISR_REG_OFFSET 0x9c +#define IRQ_ILR0_REG_OFFSET 0x1c +#define IRQ_GMR_REG_OFFSET 0xa0 + #endif -#endif -#include <plat/hardware.h> +/* + * ---------------------------------------------------------------------------- + * System control registers + * ---------------------------------------------------------------------------- + */ +#define MOD_CONF_CTRL_0 0xfffe1080 +#define MOD_CONF_CTRL_1 0xfffe1110 + +/* + * ---------------------------------------------------------------------------- + * Pin multiplexing registers + * ---------------------------------------------------------------------------- + */ +#define FUNC_MUX_CTRL_0 0xfffe1000 +#define FUNC_MUX_CTRL_1 0xfffe1004 +#define FUNC_MUX_CTRL_2 0xfffe1008 +#define COMP_MODE_CTRL_0 0xfffe100c +#define FUNC_MUX_CTRL_3 0xfffe1010 +#define FUNC_MUX_CTRL_4 0xfffe1014 +#define FUNC_MUX_CTRL_5 0xfffe1018 +#define FUNC_MUX_CTRL_6 0xfffe101C +#define FUNC_MUX_CTRL_7 0xfffe1020 +#define FUNC_MUX_CTRL_8 0xfffe1024 +#define FUNC_MUX_CTRL_9 0xfffe1028 +#define FUNC_MUX_CTRL_A 0xfffe102C +#define FUNC_MUX_CTRL_B 0xfffe1030 +#define FUNC_MUX_CTRL_C 0xfffe1034 +#define FUNC_MUX_CTRL_D 0xfffe1038 +#define PULL_DWN_CTRL_0 0xfffe1040 +#define PULL_DWN_CTRL_1 0xfffe1044 +#define PULL_DWN_CTRL_2 0xfffe1048 +#define PULL_DWN_CTRL_3 0xfffe104c +#define PULL_DWN_CTRL_4 0xfffe10ac + +/* OMAP-1610 specific multiplexing registers */ +#define FUNC_MUX_CTRL_E 0xfffe1090 +#define FUNC_MUX_CTRL_F 0xfffe1094 +#define FUNC_MUX_CTRL_10 0xfffe1098 +#define FUNC_MUX_CTRL_11 0xfffe109c +#define FUNC_MUX_CTRL_12 0xfffe10a0 +#define PU_PD_SEL_0 0xfffe10b4 +#define PU_PD_SEL_1 0xfffe10b8 +#define PU_PD_SEL_2 0xfffe10bc +#define PU_PD_SEL_3 0xfffe10c0 +#define PU_PD_SEL_4 0xfffe10c4 + +/* Timer32K for 1610 and 1710*/ +#define OMAP_TIMER32K_BASE 0xFFFBC400 + +/* + * --------------------------------------------------------------------------- + * TIPB bus interface + * --------------------------------------------------------------------------- + */ +#define TIPB_PUBLIC_CNTL_BASE 0xfffed300 +#define MPU_PUBLIC_TIPB_CNTL (TIPB_PUBLIC_CNTL_BASE + 0x8) +#define TIPB_PRIVATE_CNTL_BASE 0xfffeca00 +#define MPU_PRIVATE_TIPB_CNTL (TIPB_PRIVATE_CNTL_BASE + 0x8) + +/* + * ---------------------------------------------------------------------------- + * MPUI interface + * ---------------------------------------------------------------------------- + */ +#define MPUI_BASE (0xfffec900) +#define MPUI_CTRL (MPUI_BASE + 0x0) +#define MPUI_DEBUG_ADDR (MPUI_BASE + 0x4) +#define MPUI_DEBUG_DATA (MPUI_BASE + 0x8) +#define MPUI_DEBUG_FLAG (MPUI_BASE + 0xc) +#define MPUI_STATUS_REG (MPUI_BASE + 0x10) +#define MPUI_DSP_STATUS (MPUI_BASE + 0x14) +#define MPUI_DSP_BOOT_CONFIG (MPUI_BASE + 0x18) +#define MPUI_DSP_API_CONFIG (MPUI_BASE + 0x1c) + +/* + * ---------------------------------------------------------------------------- + * LED Pulse Generator + * ---------------------------------------------------------------------------- + */ +#define OMAP_LPG1_BASE 0xfffbd000 +#define OMAP_LPG2_BASE 0xfffbd800 +#define OMAP_LPG1_LCR (OMAP_LPG1_BASE + 0x00) +#define OMAP_LPG1_PMR (OMAP_LPG1_BASE + 0x04) +#define OMAP_LPG2_LCR (OMAP_LPG2_BASE + 0x00) +#define OMAP_LPG2_PMR (OMAP_LPG2_BASE + 0x04) + +/* + * ---------------------------------------------------------------------------- + * Pulse-Width Light + * ---------------------------------------------------------------------------- + */ +#define OMAP_PWL_BASE 0xfffb5800 +#define OMAP_PWL_ENABLE (OMAP_PWL_BASE + 0x00) +#define OMAP_PWL_CLK_ENABLE (OMAP_PWL_BASE + 0x04) + +/* + * --------------------------------------------------------------------------- + * Processor specific defines + * --------------------------------------------------------------------------- + */ + +#include "omap7xx.h" +#include "omap1510.h" +#include "omap16xx.h" + +#endif /* __ASM_ARCH_OMAP_HARDWARE_H */ diff --git a/arch/arm/mach-omap1/include/mach/irda.h b/arch/arm/mach-omap1/include/mach/irda.h new file mode 100644 index 00000000000..40f60339d1c --- /dev/null +++ b/arch/arm/mach-omap1/include/mach/irda.h @@ -0,0 +1,33 @@ +/* + * arch/arm/plat-omap/include/mach/irda.h + * + * Copyright (C) 2005-2006 Komal Shah <komal_shah802003@yahoo.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef ASMARM_ARCH_IRDA_H +#define ASMARM_ARCH_IRDA_H + +/* board specific transceiver capabilities */ + +#define IR_SEL 1 /* Selects IrDA */ +#define IR_SIRMODE 2 +#define IR_FIRMODE 4 +#define IR_MIRMODE 8 + +struct omap_irda_config { + int transceiver_cap; + int (*transceiver_mode)(struct device *dev, int mode); + int (*select_irda)(struct device *dev, int state); + int rx_channel; + int tx_channel; + unsigned long dest_start; + unsigned long src_start; + int tx_trigger; + int rx_trigger; + int mode; +}; + +#endif diff --git a/arch/arm/mach-omap1/include/mach/irqs.h b/arch/arm/mach-omap1/include/mach/irqs.h index 9292fdc1cb0..729992d7d26 100644 --- a/arch/arm/mach-omap1/include/mach/irqs.h +++ b/arch/arm/mach-omap1/include/mach/irqs.h @@ -1,5 +1,268 @@ /* - * arch/arm/mach-omap1/include/mach/irqs.h + * arch/arm/plat-omap/include/mach/irqs.h + * + * Copyright (C) Greg Lonnon 2001 + * Updated for OMAP-1610 by Tony Lindgren <tony@atomide.com> + * + * Copyright (C) 2009 Texas Instruments + * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * NOTE: The interrupt vectors for the OMAP-1509, OMAP-1510, and OMAP-1610 + * are different. */ -#include <plat/irqs.h> +#ifndef __ASM_ARCH_OMAP15XX_IRQS_H +#define __ASM_ARCH_OMAP15XX_IRQS_H + +/* + * IRQ numbers for interrupt handler 1 + * + * NOTE: See also the OMAP-1510 and 1610 specific IRQ numbers below + * + */ +#define INT_CAMERA 1 +#define INT_FIQ 3 +#define INT_RTDX 6 +#define INT_DSP_MMU_ABORT 7 +#define INT_HOST 8 +#define INT_ABORT 9 +#define INT_BRIDGE_PRIV 13 +#define INT_GPIO_BANK1 14 +#define INT_UART3 15 +#define INT_TIMER3 16 +#define INT_DMA_CH0_6 19 +#define INT_DMA_CH1_7 20 +#define INT_DMA_CH2_8 21 +#define INT_DMA_CH3 22 +#define INT_DMA_CH4 23 +#define INT_DMA_CH5 24 +#define INT_TIMER1 26 +#define INT_WD_TIMER 27 +#define INT_BRIDGE_PUB 28 +#define INT_TIMER2 30 +#define INT_LCD_CTRL 31 + +/* + * OMAP-1510 specific IRQ numbers for interrupt handler 1 + */ +#define INT_1510_IH2_IRQ 0 +#define INT_1510_RES2 2 +#define INT_1510_SPI_TX 4 +#define INT_1510_SPI_RX 5 +#define INT_1510_DSP_MAILBOX1 10 +#define INT_1510_DSP_MAILBOX2 11 +#define INT_1510_RES12 12 +#define INT_1510_LB_MMU 17 +#define INT_1510_RES18 18 +#define INT_1510_LOCAL_BUS 29 + +/* + * OMAP-1610 specific IRQ numbers for interrupt handler 1 + */ +#define INT_1610_IH2_IRQ INT_1510_IH2_IRQ +#define INT_1610_IH2_FIQ 2 +#define INT_1610_McBSP2_TX 4 +#define INT_1610_McBSP2_RX 5 +#define INT_1610_DSP_MAILBOX1 10 +#define INT_1610_DSP_MAILBOX2 11 +#define INT_1610_LCD_LINE 12 +#define INT_1610_GPTIMER1 17 +#define INT_1610_GPTIMER2 18 +#define INT_1610_SSR_FIFO_0 29 + +/* + * OMAP-7xx specific IRQ numbers for interrupt handler 1 + */ +#define INT_7XX_IH2_FIQ 0 +#define INT_7XX_IH2_IRQ 1 +#define INT_7XX_USB_NON_ISO 2 +#define INT_7XX_USB_ISO 3 +#define INT_7XX_ICR 4 +#define INT_7XX_EAC 5 +#define INT_7XX_GPIO_BANK1 6 +#define INT_7XX_GPIO_BANK2 7 +#define INT_7XX_GPIO_BANK3 8 +#define INT_7XX_McBSP2TX 10 +#define INT_7XX_McBSP2RX 11 +#define INT_7XX_McBSP2RX_OVF 12 +#define INT_7XX_LCD_LINE 14 +#define INT_7XX_GSM_PROTECT 15 +#define INT_7XX_TIMER3 16 +#define INT_7XX_GPIO_BANK5 17 +#define INT_7XX_GPIO_BANK6 18 +#define INT_7XX_SPGIO_WR 29 + +/* + * IRQ numbers for interrupt handler 2 + * + * NOTE: See also the OMAP-1510 and 1610 specific IRQ numbers below + */ +#define IH2_BASE 32 + +#define INT_KEYBOARD (1 + IH2_BASE) +#define INT_uWireTX (2 + IH2_BASE) +#define INT_uWireRX (3 + IH2_BASE) +#define INT_I2C (4 + IH2_BASE) +#define INT_MPUIO (5 + IH2_BASE) +#define INT_USB_HHC_1 (6 + IH2_BASE) +#define INT_McBSP3TX (10 + IH2_BASE) +#define INT_McBSP3RX (11 + IH2_BASE) +#define INT_McBSP1TX (12 + IH2_BASE) +#define INT_McBSP1RX (13 + IH2_BASE) +#define INT_UART1 (14 + IH2_BASE) +#define INT_UART2 (15 + IH2_BASE) +#define INT_BT_MCSI1TX (16 + IH2_BASE) +#define INT_BT_MCSI1RX (17 + IH2_BASE) +#define INT_SOSSI_MATCH (19 + IH2_BASE) +#define INT_USB_W2FC (20 + IH2_BASE) +#define INT_1WIRE (21 + IH2_BASE) +#define INT_OS_TIMER (22 + IH2_BASE) +#define INT_MMC (23 + IH2_BASE) +#define INT_GAUGE_32K (24 + IH2_BASE) +#define INT_RTC_TIMER (25 + IH2_BASE) +#define INT_RTC_ALARM (26 + IH2_BASE) +#define INT_MEM_STICK (27 + IH2_BASE) + +/* + * OMAP-1510 specific IRQ numbers for interrupt handler 2 + */ +#define INT_1510_DSP_MMU (28 + IH2_BASE) +#define INT_1510_COM_SPI_RO (31 + IH2_BASE) + +/* + * OMAP-1610 specific IRQ numbers for interrupt handler 2 + */ +#define INT_1610_FAC (0 + IH2_BASE) +#define INT_1610_USB_HHC_2 (7 + IH2_BASE) +#define INT_1610_USB_OTG (8 + IH2_BASE) +#define INT_1610_SoSSI (9 + IH2_BASE) +#define INT_1610_SoSSI_MATCH (19 + IH2_BASE) +#define INT_1610_DSP_MMU (28 + IH2_BASE) +#define INT_1610_McBSP2RX_OF (31 + IH2_BASE) +#define INT_1610_STI (32 + IH2_BASE) +#define INT_1610_STI_WAKEUP (33 + IH2_BASE) +#define INT_1610_GPTIMER3 (34 + IH2_BASE) +#define INT_1610_GPTIMER4 (35 + IH2_BASE) +#define INT_1610_GPTIMER5 (36 + IH2_BASE) +#define INT_1610_GPTIMER6 (37 + IH2_BASE) +#define INT_1610_GPTIMER7 (38 + IH2_BASE) +#define INT_1610_GPTIMER8 (39 + IH2_BASE) +#define INT_1610_GPIO_BANK2 (40 + IH2_BASE) +#define INT_1610_GPIO_BANK3 (41 + IH2_BASE) +#define INT_1610_MMC2 (42 + IH2_BASE) +#define INT_1610_CF (43 + IH2_BASE) +#define INT_1610_WAKE_UP_REQ (46 + IH2_BASE) +#define INT_1610_GPIO_BANK4 (48 + IH2_BASE) +#define INT_1610_SPI (49 + IH2_BASE) +#define INT_1610_DMA_CH6 (53 + IH2_BASE) +#define INT_1610_DMA_CH7 (54 + IH2_BASE) +#define INT_1610_DMA_CH8 (55 + IH2_BASE) +#define INT_1610_DMA_CH9 (56 + IH2_BASE) +#define INT_1610_DMA_CH10 (57 + IH2_BASE) +#define INT_1610_DMA_CH11 (58 + IH2_BASE) +#define INT_1610_DMA_CH12 (59 + IH2_BASE) +#define INT_1610_DMA_CH13 (60 + IH2_BASE) +#define INT_1610_DMA_CH14 (61 + IH2_BASE) +#define INT_1610_DMA_CH15 (62 + IH2_BASE) +#define INT_1610_NAND (63 + IH2_BASE) +#define INT_1610_SHA1MD5 (91 + IH2_BASE) + +/* + * OMAP-7xx specific IRQ numbers for interrupt handler 2 + */ +#define INT_7XX_HW_ERRORS (0 + IH2_BASE) +#define INT_7XX_NFIQ_PWR_FAIL (1 + IH2_BASE) +#define INT_7XX_CFCD (2 + IH2_BASE) +#define INT_7XX_CFIREQ (3 + IH2_BASE) +#define INT_7XX_I2C (4 + IH2_BASE) +#define INT_7XX_PCC (5 + IH2_BASE) +#define INT_7XX_MPU_EXT_NIRQ (6 + IH2_BASE) +#define INT_7XX_SPI_100K_1 (7 + IH2_BASE) +#define INT_7XX_SYREN_SPI (8 + IH2_BASE) +#define INT_7XX_VLYNQ (9 + IH2_BASE) +#define INT_7XX_GPIO_BANK4 (10 + IH2_BASE) +#define INT_7XX_McBSP1TX (11 + IH2_BASE) +#define INT_7XX_McBSP1RX (12 + IH2_BASE) +#define INT_7XX_McBSP1RX_OF (13 + IH2_BASE) +#define INT_7XX_UART_MODEM_IRDA_2 (14 + IH2_BASE) +#define INT_7XX_UART_MODEM_1 (15 + IH2_BASE) +#define INT_7XX_MCSI (16 + IH2_BASE) +#define INT_7XX_uWireTX (17 + IH2_BASE) +#define INT_7XX_uWireRX (18 + IH2_BASE) +#define INT_7XX_SMC_CD (19 + IH2_BASE) +#define INT_7XX_SMC_IREQ (20 + IH2_BASE) +#define INT_7XX_HDQ_1WIRE (21 + IH2_BASE) +#define INT_7XX_TIMER32K (22 + IH2_BASE) +#define INT_7XX_MMC_SDIO (23 + IH2_BASE) +#define INT_7XX_UPLD (24 + IH2_BASE) +#define INT_7XX_USB_HHC_1 (27 + IH2_BASE) +#define INT_7XX_USB_HHC_2 (28 + IH2_BASE) +#define INT_7XX_USB_GENI (29 + IH2_BASE) +#define INT_7XX_USB_OTG (30 + IH2_BASE) +#define INT_7XX_CAMERA_IF (31 + IH2_BASE) +#define INT_7XX_RNG (32 + IH2_BASE) +#define INT_7XX_DUAL_MODE_TIMER (33 + IH2_BASE) +#define INT_7XX_DBB_RF_EN (34 + IH2_BASE) +#define INT_7XX_MPUIO_KEYPAD (35 + IH2_BASE) +#define INT_7XX_SHA1_MD5 (36 + IH2_BASE) +#define INT_7XX_SPI_100K_2 (37 + IH2_BASE) +#define INT_7XX_RNG_IDLE (38 + IH2_BASE) +#define INT_7XX_MPUIO (39 + IH2_BASE) +#define INT_7XX_LLPC_LCD_CTRL_CAN_BE_OFF (40 + IH2_BASE) +#define INT_7XX_LLPC_OE_FALLING (41 + IH2_BASE) +#define INT_7XX_LLPC_OE_RISING (42 + IH2_BASE) +#define INT_7XX_LLPC_VSYNC (43 + IH2_BASE) +#define INT_7XX_WAKE_UP_REQ (46 + IH2_BASE) +#define INT_7XX_DMA_CH6 (53 + IH2_BASE) +#define INT_7XX_DMA_CH7 (54 + IH2_BASE) +#define INT_7XX_DMA_CH8 (55 + IH2_BASE) +#define INT_7XX_DMA_CH9 (56 + IH2_BASE) +#define INT_7XX_DMA_CH10 (57 + IH2_BASE) +#define INT_7XX_DMA_CH11 (58 + IH2_BASE) +#define INT_7XX_DMA_CH12 (59 + IH2_BASE) +#define INT_7XX_DMA_CH13 (60 + IH2_BASE) +#define INT_7XX_DMA_CH14 (61 + IH2_BASE) +#define INT_7XX_DMA_CH15 (62 + IH2_BASE) +#define INT_7XX_NAND (63 + IH2_BASE) + +/* Max. 128 level 2 IRQs (OMAP1610), 192 GPIOs (OMAP730/850) and + * 16 MPUIO lines */ +#define OMAP_MAX_GPIO_LINES 192 +#define IH_GPIO_BASE (128 + IH2_BASE) +#define IH_MPUIO_BASE (OMAP_MAX_GPIO_LINES + IH_GPIO_BASE) +#define OMAP_IRQ_END (IH_MPUIO_BASE + 16) + +/* External FPGA handles interrupts on Innovator boards */ +#define OMAP_FPGA_IRQ_BASE (OMAP_IRQ_END) +#ifdef CONFIG_MACH_OMAP_INNOVATOR +#define OMAP_FPGA_NR_IRQS 24 +#else +#define OMAP_FPGA_NR_IRQS 0 +#endif +#define OMAP_FPGA_IRQ_END (OMAP_FPGA_IRQ_BASE + OMAP_FPGA_NR_IRQS) + +#define NR_IRQS OMAP_FPGA_IRQ_END + +#define OMAP_IRQ_BIT(irq) (1 << ((irq) % 32)) + +#include <mach/hardware.h> + +#ifdef CONFIG_FIQ +#define FIQ_START 1024 +#endif + +#endif diff --git a/arch/arm/mach-omap1/include/mach/mux.h b/arch/arm/mach-omap1/include/mach/mux.h new file mode 100644 index 00000000000..32394895920 --- /dev/null +++ b/arch/arm/mach-omap1/include/mach/mux.h @@ -0,0 +1,454 @@ +/* + * arch/arm/plat-omap/include/mach/mux.h + * + * Table of the Omap register configurations for the FUNC_MUX and + * PULL_DWN combinations. + * + * Copyright (C) 2004 - 2008 Texas Instruments Inc. + * Copyright (C) 2003 - 2008 Nokia Corporation + * + * Written by Tony Lindgren + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * NOTE: Please use the following naming style for new pin entries. + * For example, W8_1610_MMC2_DAT0, where: + * - W8 = ball + * - 1610 = 1510 or 1610, none if common for both 1510 and 1610 + * - MMC2_DAT0 = function + */ + +#ifndef __ASM_ARCH_MUX_H +#define __ASM_ARCH_MUX_H + +#define PU_PD_SEL_NA 0 /* No pu_pd reg available */ +#define PULL_DWN_CTRL_NA 0 /* No pull-down control needed */ + +#ifdef CONFIG_OMAP_MUX_DEBUG +#define MUX_REG(reg, mode_offset, mode) .mux_reg_name = "FUNC_MUX_CTRL_"#reg, \ + .mux_reg = FUNC_MUX_CTRL_##reg, \ + .mask_offset = mode_offset, \ + .mask = mode, + +#define PULL_REG(reg, bit, status) .pull_name = "PULL_DWN_CTRL_"#reg, \ + .pull_reg = PULL_DWN_CTRL_##reg, \ + .pull_bit = bit, \ + .pull_val = status, + +#define PU_PD_REG(reg, status) .pu_pd_name = "PU_PD_SEL_"#reg, \ + .pu_pd_reg = PU_PD_SEL_##reg, \ + .pu_pd_val = status, + +#define MUX_REG_7XX(reg, mode_offset, mode) .mux_reg_name = "OMAP7XX_IO_CONF_"#reg, \ + .mux_reg = OMAP7XX_IO_CONF_##reg, \ + .mask_offset = mode_offset, \ + .mask = mode, + +#define PULL_REG_7XX(reg, bit, status) .pull_name = "OMAP7XX_IO_CONF_"#reg, \ + .pull_reg = OMAP7XX_IO_CONF_##reg, \ + .pull_bit = bit, \ + .pull_val = status, + +#else + +#define MUX_REG(reg, mode_offset, mode) .mux_reg = FUNC_MUX_CTRL_##reg, \ + .mask_offset = mode_offset, \ + .mask = mode, + +#define PULL_REG(reg, bit, status) .pull_reg = PULL_DWN_CTRL_##reg, \ + .pull_bit = bit, \ + .pull_val = status, + +#define PU_PD_REG(reg, status) .pu_pd_reg = PU_PD_SEL_##reg, \ + .pu_pd_val = status, + +#define MUX_REG_7XX(reg, mode_offset, mode) \ + .mux_reg = OMAP7XX_IO_CONF_##reg, \ + .mask_offset = mode_offset, \ + .mask = mode, + +#define PULL_REG_7XX(reg, bit, status) .pull_reg = OMAP7XX_IO_CONF_##reg, \ + .pull_bit = bit, \ + .pull_val = status, + +#endif /* CONFIG_OMAP_MUX_DEBUG */ + +#define MUX_CFG(desc, mux_reg, mode_offset, mode, \ + pull_reg, pull_bit, pull_status, \ + pu_pd_reg, pu_pd_status, debug_status) \ +{ \ + .name = desc, \ + .debug = debug_status, \ + MUX_REG(mux_reg, mode_offset, mode) \ + PULL_REG(pull_reg, pull_bit, pull_status) \ + PU_PD_REG(pu_pd_reg, pu_pd_status) \ +}, + + +/* + * OMAP730/850 has a slightly different config for the pin mux. + * - config regs are the OMAP7XX_IO_CONF_x regs (see omap7xx.h) regs and + * not the FUNC_MUX_CTRL_x regs from hardware.h + * - for pull-up/down, only has one enable bit which is is in the same register + * as mux config + */ +#define MUX_CFG_7XX(desc, mux_reg, mode_offset, mode, \ + pull_bit, pull_status, debug_status)\ +{ \ + .name = desc, \ + .debug = debug_status, \ + MUX_REG_7XX(mux_reg, mode_offset, mode) \ + PULL_REG_7XX(mux_reg, pull_bit, pull_status) \ + PU_PD_REG(NA, 0) \ +}, + +struct pin_config { + char *name; + const unsigned int mux_reg; + unsigned char debug; + + const unsigned char mask_offset; + const unsigned char mask; + + const char *pull_name; + const unsigned int pull_reg; + const unsigned char pull_val; + const unsigned char pull_bit; + + const char *pu_pd_name; + const unsigned int pu_pd_reg; + const unsigned char pu_pd_val; + +#if defined(CONFIG_OMAP_MUX_DEBUG) || defined(CONFIG_OMAP_MUX_WARNINGS) + const char *mux_reg_name; +#endif + +}; + +enum omap7xx_index { + /* OMAP 730 keyboard */ + E2_7XX_KBR0, + J7_7XX_KBR1, + E1_7XX_KBR2, + F3_7XX_KBR3, + D2_7XX_KBR4, + C2_7XX_KBC0, + D3_7XX_KBC1, + E4_7XX_KBC2, + F4_7XX_KBC3, + E3_7XX_KBC4, + + /* USB */ + AA17_7XX_USB_DM, + W16_7XX_USB_PU_EN, + W17_7XX_USB_VBUSI, + W18_7XX_USB_DMCK_OUT, + W19_7XX_USB_DCRST, + + /* MMC */ + MMC_7XX_CMD, + MMC_7XX_CLK, + MMC_7XX_DAT0, + + /* I2C */ + I2C_7XX_SCL, + I2C_7XX_SDA, + + /* SPI */ + SPI_7XX_1, + SPI_7XX_2, + SPI_7XX_3, + SPI_7XX_4, + SPI_7XX_5, + SPI_7XX_6, + + /* UART */ + UART_7XX_1, + UART_7XX_2, +}; + +enum omap1xxx_index { + /* UART1 (BT_UART_GATING)*/ + UART1_TX = 0, + UART1_RTS, + + /* UART2 (COM_UART_GATING)*/ + UART2_TX, + UART2_RX, + UART2_CTS, + UART2_RTS, + + /* UART3 (GIGA_UART_GATING) */ + UART3_TX, + UART3_RX, + UART3_CTS, + UART3_RTS, + UART3_CLKREQ, + UART3_BCLK, /* 12MHz clock out */ + Y15_1610_UART3_RTS, + + /* PWT & PWL */ + PWT, + PWL, + + /* USB master generic */ + R18_USB_VBUS, + R18_1510_USB_GPIO0, + W4_USB_PUEN, + W4_USB_CLKO, + W4_USB_HIGHZ, + W4_GPIO58, + + /* USB1 master */ + USB1_SUSP, + USB1_SEO, + W13_1610_USB1_SE0, + USB1_TXEN, + USB1_TXD, + USB1_VP, + USB1_VM, + USB1_RCV, + USB1_SPEED, + R13_1610_USB1_SPEED, + R13_1710_USB1_SE0, + + /* USB2 master */ + USB2_SUSP, + USB2_VP, + USB2_TXEN, + USB2_VM, + USB2_RCV, + USB2_SEO, + USB2_TXD, + + /* OMAP-1510 GPIO */ + R18_1510_GPIO0, + R19_1510_GPIO1, + M14_1510_GPIO2, + + /* OMAP1610 GPIO */ + P18_1610_GPIO3, + Y15_1610_GPIO17, + + /* OMAP-1710 GPIO */ + R18_1710_GPIO0, + V2_1710_GPIO10, + N21_1710_GPIO14, + W15_1710_GPIO40, + + /* MPUIO */ + MPUIO2, + N15_1610_MPUIO2, + MPUIO4, + MPUIO5, + T20_1610_MPUIO5, + W11_1610_MPUIO6, + V10_1610_MPUIO7, + W11_1610_MPUIO9, + V10_1610_MPUIO10, + W10_1610_MPUIO11, + E20_1610_MPUIO13, + U20_1610_MPUIO14, + E19_1610_MPUIO15, + + /* MCBSP2 */ + MCBSP2_CLKR, + MCBSP2_CLKX, + MCBSP2_DR, + MCBSP2_DX, + MCBSP2_FSR, + MCBSP2_FSX, + + /* MCBSP3 */ + MCBSP3_CLKX, + + /* Misc ballouts */ + BALLOUT_V8_ARMIO3, + N20_HDQ, + + /* OMAP-1610 MMC2 */ + W8_1610_MMC2_DAT0, + V8_1610_MMC2_DAT1, + W15_1610_MMC2_DAT2, + R10_1610_MMC2_DAT3, + Y10_1610_MMC2_CLK, + Y8_1610_MMC2_CMD, + V9_1610_MMC2_CMDDIR, + V5_1610_MMC2_DATDIR0, + W19_1610_MMC2_DATDIR1, + R18_1610_MMC2_CLKIN, + + /* OMAP-1610 External Trace Interface */ + M19_1610_ETM_PSTAT0, + L15_1610_ETM_PSTAT1, + L18_1610_ETM_PSTAT2, + L19_1610_ETM_D0, + J19_1610_ETM_D6, + J18_1610_ETM_D7, + + /* OMAP16XX GPIO */ + P20_1610_GPIO4, + V9_1610_GPIO7, + W8_1610_GPIO9, + N20_1610_GPIO11, + N19_1610_GPIO13, + P10_1610_GPIO22, + V5_1610_GPIO24, + AA20_1610_GPIO_41, + W19_1610_GPIO48, + M7_1610_GPIO62, + V14_16XX_GPIO37, + R9_16XX_GPIO18, + L14_16XX_GPIO49, + + /* OMAP-1610 uWire */ + V19_1610_UWIRE_SCLK, + U18_1610_UWIRE_SDI, + W21_1610_UWIRE_SDO, + N14_1610_UWIRE_CS0, + P15_1610_UWIRE_CS3, + N15_1610_UWIRE_CS1, + + /* OMAP-1610 SPI */ + U19_1610_SPIF_SCK, + U18_1610_SPIF_DIN, + P20_1610_SPIF_DIN, + W21_1610_SPIF_DOUT, + R18_1610_SPIF_DOUT, + N14_1610_SPIF_CS0, + N15_1610_SPIF_CS1, + T19_1610_SPIF_CS2, + P15_1610_SPIF_CS3, + + /* OMAP-1610 Flash */ + L3_1610_FLASH_CS2B_OE, + M8_1610_FLASH_CS2B_WE, + + /* First MMC */ + MMC_CMD, + MMC_DAT1, + MMC_DAT2, + MMC_DAT0, + MMC_CLK, + MMC_DAT3, + + /* OMAP-1710 MMC CMDDIR and DATDIR0 */ + M15_1710_MMC_CLKI, + P19_1710_MMC_CMDDIR, + P20_1710_MMC_DATDIR0, + + /* OMAP-1610 USB0 alternate pin configuration */ + W9_USB0_TXEN, + AA9_USB0_VP, + Y5_USB0_RCV, + R9_USB0_VM, + V6_USB0_TXD, + W5_USB0_SE0, + V9_USB0_SPEED, + V9_USB0_SUSP, + + /* USB2 */ + W9_USB2_TXEN, + AA9_USB2_VP, + Y5_USB2_RCV, + R9_USB2_VM, + V6_USB2_TXD, + W5_USB2_SE0, + + /* 16XX UART */ + R13_1610_UART1_TX, + V14_16XX_UART1_RX, + R14_1610_UART1_CTS, + AA15_1610_UART1_RTS, + R9_16XX_UART2_RX, + L14_16XX_UART3_RX, + + /* I2C OMAP-1610 */ + I2C_SCL, + I2C_SDA, + + /* Keypad */ + F18_1610_KBC0, + D20_1610_KBC1, + D19_1610_KBC2, + E18_1610_KBC3, + C21_1610_KBC4, + G18_1610_KBR0, + F19_1610_KBR1, + H14_1610_KBR2, + E20_1610_KBR3, + E19_1610_KBR4, + N19_1610_KBR5, + + /* Power management */ + T20_1610_LOW_PWR, + + /* MCLK Settings */ + V5_1710_MCLK_ON, + V5_1710_MCLK_OFF, + R10_1610_MCLK_ON, + R10_1610_MCLK_OFF, + + /* CompactFlash controller */ + P11_1610_CF_CD2, + R11_1610_CF_IOIS16, + V10_1610_CF_IREQ, + W10_1610_CF_RESET, + W11_1610_CF_CD1, + + /* parallel camera */ + J15_1610_CAM_LCLK, + J18_1610_CAM_D7, + J19_1610_CAM_D6, + J14_1610_CAM_D5, + K18_1610_CAM_D4, + K19_1610_CAM_D3, + K15_1610_CAM_D2, + K14_1610_CAM_D1, + L19_1610_CAM_D0, + L18_1610_CAM_VS, + L15_1610_CAM_HS, + M19_1610_CAM_RSTZ, + Y15_1610_CAM_OUTCLK, + + /* serial camera */ + H19_1610_CAM_EXCLK, + Y12_1610_CCP_CLKP, + W13_1610_CCP_CLKM, + W14_1610_CCP_DATAP, + Y14_1610_CCP_DATAM, + +}; + +struct omap_mux_cfg { + struct pin_config *pins; + unsigned long size; + int (*cfg_reg)(const struct pin_config *cfg); +}; + +#ifdef CONFIG_OMAP_MUX +/* setup pin muxing in Linux */ +extern int omap1_mux_init(void); +extern int omap_mux_register(struct omap_mux_cfg *); +extern int omap_cfg_reg(unsigned long reg_cfg); +#else +/* boot loader does it all (no warnings from CONFIG_OMAP_MUX_WARNINGS) */ +static inline int omap1_mux_init(void) { return 0; } +static inline int omap_cfg_reg(unsigned long reg_cfg) { return 0; } +#endif + +extern int omap2_mux_init(void); + +#endif diff --git a/arch/arm/mach-omap1/include/mach/omap1510.h b/arch/arm/mach-omap1/include/mach/omap1510.h new file mode 100644 index 00000000000..8fe05d6137c --- /dev/null +++ b/arch/arm/mach-omap1/include/mach/omap1510.h @@ -0,0 +1,49 @@ +/* + * Hardware definitions for TI OMAP1510 processor. + * + * Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __ASM_ARCH_OMAP15XX_H +#define __ASM_ARCH_OMAP15XX_H + +/* + * ---------------------------------------------------------------------------- + * Base addresses + * ---------------------------------------------------------------------------- + */ + +/* Syntax: XX_BASE = Virtual base address, XX_START = Physical base address */ + +#define OMAP1510_DSP_BASE 0xE0000000 +#define OMAP1510_DSP_SIZE 0x28000 +#define OMAP1510_DSP_START 0xE0000000 + +#define OMAP1510_DSPREG_BASE 0xE1000000 +#define OMAP1510_DSPREG_SIZE SZ_128K +#define OMAP1510_DSPREG_START 0xE1000000 + +#define OMAP1510_DSP_MMU_BASE (0xfffed200) + +#endif /* __ASM_ARCH_OMAP15XX_H */ + diff --git a/arch/arm/mach-omap1/include/mach/omap16xx.h b/arch/arm/mach-omap1/include/mach/omap16xx.h new file mode 100644 index 00000000000..cd1c724869c --- /dev/null +++ b/arch/arm/mach-omap1/include/mach/omap16xx.h @@ -0,0 +1,201 @@ +/* + * Hardware definitions for TI OMAP1610/5912/1710 processors. + * + * Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __ASM_ARCH_OMAP16XX_H +#define __ASM_ARCH_OMAP16XX_H + +/* + * ---------------------------------------------------------------------------- + * Base addresses + * ---------------------------------------------------------------------------- + */ + +/* Syntax: XX_BASE = Virtual base address, XX_START = Physical base address */ + +#define OMAP16XX_DSP_BASE 0xE0000000 +#define OMAP16XX_DSP_SIZE 0x28000 +#define OMAP16XX_DSP_START 0xE0000000 + +#define OMAP16XX_DSPREG_BASE 0xE1000000 +#define OMAP16XX_DSPREG_SIZE SZ_128K +#define OMAP16XX_DSPREG_START 0xE1000000 + +#define OMAP16XX_SEC_BASE 0xFFFE4000 +#define OMAP16XX_SEC_DES (OMAP16XX_SEC_BASE + 0x0000) +#define OMAP16XX_SEC_SHA1MD5 (OMAP16XX_SEC_BASE + 0x0800) +#define OMAP16XX_SEC_RNG (OMAP16XX_SEC_BASE + 0x1000) + +/* + * --------------------------------------------------------------------------- + * Interrupts + * --------------------------------------------------------------------------- + */ +#define OMAP_IH2_0_BASE (0xfffe0000) +#define OMAP_IH2_1_BASE (0xfffe0100) +#define OMAP_IH2_2_BASE (0xfffe0200) +#define OMAP_IH2_3_BASE (0xfffe0300) + +#define OMAP_IH2_0_ITR (OMAP_IH2_0_BASE + 0x00) +#define OMAP_IH2_0_MIR (OMAP_IH2_0_BASE + 0x04) +#define OMAP_IH2_0_SIR_IRQ (OMAP_IH2_0_BASE + 0x10) +#define OMAP_IH2_0_SIR_FIQ (OMAP_IH2_0_BASE + 0x14) +#define OMAP_IH2_0_CONTROL (OMAP_IH2_0_BASE + 0x18) +#define OMAP_IH2_0_ILR0 (OMAP_IH2_0_BASE + 0x1c) +#define OMAP_IH2_0_ISR (OMAP_IH2_0_BASE + 0x9c) + +#define OMAP_IH2_1_ITR (OMAP_IH2_1_BASE + 0x00) +#define OMAP_IH2_1_MIR (OMAP_IH2_1_BASE + 0x04) +#define OMAP_IH2_1_SIR_IRQ (OMAP_IH2_1_BASE + 0x10) +#define OMAP_IH2_1_SIR_FIQ (OMAP_IH2_1_BASE + 0x14) +#define OMAP_IH2_1_CONTROL (OMAP_IH2_1_BASE + 0x18) +#define OMAP_IH2_1_ILR1 (OMAP_IH2_1_BASE + 0x1c) +#define OMAP_IH2_1_ISR (OMAP_IH2_1_BASE + 0x9c) + +#define OMAP_IH2_2_ITR (OMAP_IH2_2_BASE + 0x00) +#define OMAP_IH2_2_MIR (OMAP_IH2_2_BASE + 0x04) +#define OMAP_IH2_2_SIR_IRQ (OMAP_IH2_2_BASE + 0x10) +#define OMAP_IH2_2_SIR_FIQ (OMAP_IH2_2_BASE + 0x14) +#define OMAP_IH2_2_CONTROL (OMAP_IH2_2_BASE + 0x18) +#define OMAP_IH2_2_ILR2 (OMAP_IH2_2_BASE + 0x1c) +#define OMAP_IH2_2_ISR (OMAP_IH2_2_BASE + 0x9c) + +#define OMAP_IH2_3_ITR (OMAP_IH2_3_BASE + 0x00) +#define OMAP_IH2_3_MIR (OMAP_IH2_3_BASE + 0x04) +#define OMAP_IH2_3_SIR_IRQ (OMAP_IH2_3_BASE + 0x10) +#define OMAP_IH2_3_SIR_FIQ (OMAP_IH2_3_BASE + 0x14) +#define OMAP_IH2_3_CONTROL (OMAP_IH2_3_BASE + 0x18) +#define OMAP_IH2_3_ILR3 (OMAP_IH2_3_BASE + 0x1c) +#define OMAP_IH2_3_ISR (OMAP_IH2_3_BASE + 0x9c) + +/* + * ---------------------------------------------------------------------------- + * Clocks + * ---------------------------------------------------------------------------- + */ +#define OMAP16XX_ARM_IDLECT3 (CLKGEN_REG_BASE + 0x24) + +/* + * ---------------------------------------------------------------------------- + * Pin configuration registers + * ---------------------------------------------------------------------------- + */ +#define OMAP16XX_CONF_VOLTAGE_VDDSHV6 (1 << 8) +#define OMAP16XX_CONF_VOLTAGE_VDDSHV7 (1 << 9) +#define OMAP16XX_CONF_VOLTAGE_VDDSHV8 (1 << 10) +#define OMAP16XX_CONF_VOLTAGE_VDDSHV9 (1 << 11) +#define OMAP16XX_SUBLVDS_CONF_VALID (1 << 13) + +/* + * ---------------------------------------------------------------------------- + * System control registers + * ---------------------------------------------------------------------------- + */ +#define OMAP1610_RESET_CONTROL 0xfffe1140 + +/* + * --------------------------------------------------------------------------- + * TIPB bus interface + * --------------------------------------------------------------------------- + */ +#define TIPB_SWITCH_BASE (0xfffbc800) +#define OMAP16XX_MMCSD2_SSW_MPU_CONF (TIPB_SWITCH_BASE + 0x160) + +/* UART3 Registers Mapping through MPU bus */ +#define UART3_RHR (OMAP1_UART3_BASE + 0) +#define UART3_THR (OMAP1_UART3_BASE + 0) +#define UART3_DLL (OMAP1_UART3_BASE + 0) +#define UART3_IER (OMAP1_UART3_BASE + 4) +#define UART3_DLH (OMAP1_UART3_BASE + 4) +#define UART3_IIR (OMAP1_UART3_BASE + 8) +#define UART3_FCR (OMAP1_UART3_BASE + 8) +#define UART3_EFR (OMAP1_UART3_BASE + 8) +#define UART3_LCR (OMAP1_UART3_BASE + 0x0C) +#define UART3_MCR (OMAP1_UART3_BASE + 0x10) +#define UART3_XON1_ADDR1 (OMAP1_UART3_BASE + 0x10) +#define UART3_XON2_ADDR2 (OMAP1_UART3_BASE + 0x14) +#define UART3_LSR (OMAP1_UART3_BASE + 0x14) +#define UART3_TCR (OMAP1_UART3_BASE + 0x18) +#define UART3_MSR (OMAP1_UART3_BASE + 0x18) +#define UART3_XOFF1 (OMAP1_UART3_BASE + 0x18) +#define UART3_XOFF2 (OMAP1_UART3_BASE + 0x1C) +#define UART3_SPR (OMAP1_UART3_BASE + 0x1C) +#define UART3_TLR (OMAP1_UART3_BASE + 0x1C) +#define UART3_MDR1 (OMAP1_UART3_BASE + 0x20) +#define UART3_MDR2 (OMAP1_UART3_BASE + 0x24) +#define UART3_SFLSR (OMAP1_UART3_BASE + 0x28) +#define UART3_TXFLL (OMAP1_UART3_BASE + 0x28) +#define UART3_RESUME (OMAP1_UART3_BASE + 0x2C) +#define UART3_TXFLH (OMAP1_UART3_BASE + 0x2C) +#define UART3_SFREGL (OMAP1_UART3_BASE + 0x30) +#define UART3_RXFLL (OMAP1_UART3_BASE + 0x30) +#define UART3_SFREGH (OMAP1_UART3_BASE + 0x34) +#define UART3_RXFLH (OMAP1_UART3_BASE + 0x34) +#define UART3_BLR (OMAP1_UART3_BASE + 0x38) +#define UART3_ACREG (OMAP1_UART3_BASE + 0x3C) +#define UART3_DIV16 (OMAP1_UART3_BASE + 0x3C) +#define UART3_SCR (OMAP1_UART3_BASE + 0x40) +#define UART3_SSR (OMAP1_UART3_BASE + 0x44) +#define UART3_EBLR (OMAP1_UART3_BASE + 0x48) +#define UART3_OSC_12M_SEL (OMAP1_UART3_BASE + 0x4C) +#define UART3_MVR (OMAP1_UART3_BASE + 0x50) + +/* + * --------------------------------------------------------------------------- + * Watchdog timer + * --------------------------------------------------------------------------- + */ + +/* 32-bit Watchdog timer in OMAP 16XX */ +#define OMAP_16XX_WATCHDOG_BASE (0xfffeb000) +#define OMAP_16XX_WIDR (OMAP_16XX_WATCHDOG_BASE + 0x00) +#define OMAP_16XX_WD_SYSCONFIG (OMAP_16XX_WATCHDOG_BASE + 0x10) +#define OMAP_16XX_WD_SYSSTATUS (OMAP_16XX_WATCHDOG_BASE + 0x14) +#define OMAP_16XX_WCLR (OMAP_16XX_WATCHDOG_BASE + 0x24) +#define OMAP_16XX_WCRR (OMAP_16XX_WATCHDOG_BASE + 0x28) +#define OMAP_16XX_WLDR (OMAP_16XX_WATCHDOG_BASE + 0x2c) +#define OMAP_16XX_WTGR (OMAP_16XX_WATCHDOG_BASE + 0x30) +#define OMAP_16XX_WWPS (OMAP_16XX_WATCHDOG_BASE + 0x34) +#define OMAP_16XX_WSPR (OMAP_16XX_WATCHDOG_BASE + 0x48) + +#define WCLR_PRE_SHIFT 5 +#define WCLR_PTV_SHIFT 2 + +#define WWPS_W_PEND_WSPR (1 << 4) +#define WWPS_W_PEND_WTGR (1 << 3) +#define WWPS_W_PEND_WLDR (1 << 2) +#define WWPS_W_PEND_WCRR (1 << 1) +#define WWPS_W_PEND_WCLR (1 << 0) + +#define WSPR_ENABLE_0 (0x0000bbbb) +#define WSPR_ENABLE_1 (0x00004444) +#define WSPR_DISABLE_0 (0x0000aaaa) +#define WSPR_DISABLE_1 (0x00005555) + +#define OMAP16XX_DSP_MMU_BASE (0xfffed200) +#define OMAP16XX_MAILBOX_BASE (0xfffcf000) + +#endif /* __ASM_ARCH_OMAP16XX_H */ + diff --git a/arch/arm/mach-omap1/include/mach/omap7xx.h b/arch/arm/mach-omap1/include/mach/omap7xx.h new file mode 100644 index 00000000000..63da994bc60 --- /dev/null +++ b/arch/arm/mach-omap1/include/mach/omap7xx.h @@ -0,0 +1,106 @@ +/* + * Hardware definitions for TI OMAP7XX processor. + * + * Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com> + * Adapted for omap850 by Zebediah C. McClure <zmc@lurian.net> + * Adapted for omap7xx by Alistair Buxton <a.j.buxton@gmail.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __ASM_ARCH_OMAP7XX_H +#define __ASM_ARCH_OMAP7XX_H + +/* + * ---------------------------------------------------------------------------- + * Base addresses + * ---------------------------------------------------------------------------- + */ + +/* Syntax: XX_BASE = Virtual base address, XX_START = Physical base address */ + +#define OMAP7XX_DSP_BASE 0xE0000000 +#define OMAP7XX_DSP_SIZE 0x50000 +#define OMAP7XX_DSP_START 0xE0000000 + +#define OMAP7XX_DSPREG_BASE 0xE1000000 +#define OMAP7XX_DSPREG_SIZE SZ_128K +#define OMAP7XX_DSPREG_START 0xE1000000 + +#define OMAP7XX_SPI1_BASE 0xfffc0800 +#define OMAP7XX_SPI2_BASE 0xfffc1000 + +/* + * ---------------------------------------------------------------------------- + * OMAP7XX specific configuration registers + * ---------------------------------------------------------------------------- + */ +#define OMAP7XX_CONFIG_BASE 0xfffe1000 +#define OMAP7XX_IO_CONF_0 0xfffe1070 +#define OMAP7XX_IO_CONF_1 0xfffe1074 +#define OMAP7XX_IO_CONF_2 0xfffe1078 +#define OMAP7XX_IO_CONF_3 0xfffe107c +#define OMAP7XX_IO_CONF_4 0xfffe1080 +#define OMAP7XX_IO_CONF_5 0xfffe1084 +#define OMAP7XX_IO_CONF_6 0xfffe1088 +#define OMAP7XX_IO_CONF_7 0xfffe108c +#define OMAP7XX_IO_CONF_8 0xfffe1090 +#define OMAP7XX_IO_CONF_9 0xfffe1094 +#define OMAP7XX_IO_CONF_10 0xfffe1098 +#define OMAP7XX_IO_CONF_11 0xfffe109c +#define OMAP7XX_IO_CONF_12 0xfffe10a0 +#define OMAP7XX_IO_CONF_13 0xfffe10a4 + +#define OMAP7XX_MODE_1 0xfffe1010 +#define OMAP7XX_MODE_2 0xfffe1014 + +/* CSMI specials: in terms of base + offset */ +#define OMAP7XX_MODE2_OFFSET 0x14 + +/* + * ---------------------------------------------------------------------------- + * OMAP7XX traffic controller configuration registers + * ---------------------------------------------------------------------------- + */ +#define OMAP7XX_FLASH_CFG_0 0xfffecc10 +#define OMAP7XX_FLASH_ACFG_0 0xfffecc50 +#define OMAP7XX_FLASH_CFG_1 0xfffecc14 +#define OMAP7XX_FLASH_ACFG_1 0xfffecc54 + +/* + * ---------------------------------------------------------------------------- + * OMAP7XX DSP control registers + * ---------------------------------------------------------------------------- + */ +#define OMAP7XX_ICR_BASE 0xfffbb800 +#define OMAP7XX_DSP_M_CTL 0xfffbb804 +#define OMAP7XX_DSP_MMU_BASE 0xfffed200 + +/* + * ---------------------------------------------------------------------------- + * OMAP7XX PCC_UPLD configuration registers + * ---------------------------------------------------------------------------- + */ +#define OMAP7XX_PCC_UPLD_CTRL_BASE (0xfffe0900) +#define OMAP7XX_PCC_UPLD_CTRL (OMAP7XX_PCC_UPLD_CTRL_BASE + 0x00) + +#endif /* __ASM_ARCH_OMAP7XX_H */ + diff --git a/arch/arm/mach-omap1/include/mach/smp.h b/arch/arm/mach-omap1/include/mach/smp.h deleted file mode 100644 index 80a371c06e5..00000000000 --- a/arch/arm/mach-omap1/include/mach/smp.h +++ /dev/null @@ -1,5 +0,0 @@ -/* - * arch/arm/mach-omap1/include/mach/smp.h - */ - -#include <plat/smp.h> |