diff options
Diffstat (limited to 'Documentation')
| -rw-r--r-- | Documentation/powerpc/dts-bindings/gpio/led.txt | 46 | ||||
| -rw-r--r-- | Documentation/scsi/aacraid.txt | 15 |
2 files changed, 41 insertions, 20 deletions
diff --git a/Documentation/powerpc/dts-bindings/gpio/led.txt b/Documentation/powerpc/dts-bindings/gpio/led.txt index ff51f4c0fa9..4fe14deedc0 100644 --- a/Documentation/powerpc/dts-bindings/gpio/led.txt +++ b/Documentation/powerpc/dts-bindings/gpio/led.txt @@ -1,15 +1,43 @@ -LED connected to GPIO +LEDs connected to GPIO lines Required properties: -- compatible : should be "gpio-led". -- label : (optional) the label for this LED. If omitted, the label is +- compatible : should be "gpio-leds". + +Each LED is represented as a sub-node of the gpio-leds device. Each +node's name represents the name of the corresponding LED. + +LED sub-node properties: +- gpios : Should specify the LED's GPIO, see "Specifying GPIO information + for devices" in Documentation/powerpc/booting-without-of.txt. Active + low LEDs should be indicated using flags in the GPIO specifier. +- label : (optional) The label for this LED. If omitted, the label is taken from the node name (excluding the unit address). -- gpios : should specify LED GPIO. +- linux,default-trigger : (optional) This parameter, if present, is a + string defining the trigger assigned to the LED. Current triggers are: + "backlight" - LED will act as a back-light, controlled by the framebuffer + system + "default-on" - LED will turn on + "heartbeat" - LED "double" flashes at a load average based rate + "ide-disk" - LED indicates disk activity + "timer" - LED flashes at a fixed, configurable rate -Example: +Examples: -led@0 { - compatible = "gpio-led"; - label = "hdd"; - gpios = <&mcu_pio 0 1>; +leds { + compatible = "gpio-leds"; + hdd { + label = "IDE Activity"; + gpios = <&mcu_pio 0 1>; /* Active low */ + linux,default-trigger = "ide-disk"; + }; }; + +run-control { + compatible = "gpio-leds"; + red { + gpios = <&mpc8572 6 0>; + }; + green { + gpios = <&mpc8572 7 0>; + }; +} diff --git a/Documentation/scsi/aacraid.txt b/Documentation/scsi/aacraid.txt index ddace3afc83..30f643f611b 100644 --- a/Documentation/scsi/aacraid.txt +++ b/Documentation/scsi/aacraid.txt @@ -60,17 +60,9 @@ Supported Cards/Chipsets 9005:0285:9005:02d5 Adaptec ASR-2405 (Voodoo40 Lite) 9005:0285:9005:02d6 Adaptec ASR-2445 (Voodoo44 Lite) 9005:0285:9005:02d7 Adaptec ASR-2805 (Voodoo80 Lite) - 9005:0285:9005:02d8 Adaptec 5405G (Voodoo40 PM) - 9005:0285:9005:02d9 Adaptec 5445G (Voodoo44 PM) - 9005:0285:9005:02da Adaptec 5805G (Voodoo80 PM) - 9005:0285:9005:02db Adaptec 5085G (Voodoo08 PM) - 9005:0285:9005:02dc Adaptec 51245G (Voodoo124 PM) - 9005:0285:9005:02dd Adaptec 51645G (Voodoo164 PM) - 9005:0285:9005:02de Adaptec 52445G (Voodoo244 PM) - 9005:0285:9005:02df Adaptec ASR-2045G (Voodoo04 Lite PM) - 9005:0285:9005:02e0 Adaptec ASR-2405G (Voodoo40 Lite PM) - 9005:0285:9005:02e1 Adaptec ASR-2445G (Voodoo44 Lite PM) - 9005:0285:9005:02e2 Adaptec ASR-2805G (Voodoo80 Lite PM) + 9005:0285:9005:02d8 Adaptec 5405Z (Voodoo40 BLBU) + 9005:0285:9005:02d9 Adaptec 5445Z (Voodoo44 BLBU) + 9005:0285:9005:02da Adaptec 5805Z (Voodoo80 BLBU) 1011:0046:9005:0364 Adaptec 5400S (Mustang) 1011:0046:9005:0365 Adaptec 5400S (Mustang) 9005:0287:9005:0800 Adaptec Themisto (Jupiter) @@ -140,6 +132,7 @@ Deanna Bonds (non-DASD support, PAE fibs and 64 bit, where fibs that go to the hardware are consistently called hw_fibs and not just fibs like the name of the driver tracking structure) Mark Salyzyn <Mark_Salyzyn@adaptec.com> Fixed panic issues and added some new product ids for upcoming hbas. Performance tuning, card failover and bug mitigations. +Achim Leubner <Achim_Leubner@adaptec.com> Original Driver ------------------------- |