diff options
Diffstat (limited to 'Documentation')
62 files changed, 1876 insertions, 372 deletions
diff --git a/Documentation/ABI/stable/sysfs-bus-firewire b/Documentation/ABI/stable/sysfs-bus-firewire index 3d484e5dc84..41e5a0cd1e3 100644 --- a/Documentation/ABI/stable/sysfs-bus-firewire +++ b/Documentation/ABI/stable/sysfs-bus-firewire @@ -39,6 +39,17 @@ Users: udev rules to set ownership and access permissions or ACLs of /dev/fw[0-9]+ character device files +What: /sys/bus/firewire/devices/fw[0-9]+/is_local +Date: July 2012 +KernelVersion: 3.6 +Contact: linux1394-devel@lists.sourceforge.net +Description: + IEEE 1394 node device attribute. + Read-only and immutable. +Values: 1: The sysfs entry represents a local node (a controller card). + 0: The sysfs entry represents a remote node. + + What: /sys/bus/firewire/devices/fw[0-9]+[.][0-9]+/ Date: May 2007 KernelVersion: 2.6.22 diff --git a/Documentation/ABI/testing/sysfs-bus-rbd b/Documentation/ABI/testing/sysfs-bus-rbd index bcd88eb7ebc..3c17b62899f 100644 --- a/Documentation/ABI/testing/sysfs-bus-rbd +++ b/Documentation/ABI/testing/sysfs-bus-rbd @@ -35,8 +35,14 @@ name pool - The pool where this rbd image resides. The pool-name pair is unique - per rados system. + The name of the storage pool where this rbd image resides. + An rbd image name is unique within its pool. + +pool_id + + The unique identifier for the rbd image's pool. This is + a permanent attribute of the pool. A pool's id will never + change. size diff --git a/Documentation/ABI/testing/sysfs-devices-edac b/Documentation/ABI/testing/sysfs-devices-edac new file mode 100644 index 00000000000..30ee78aaed7 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-devices-edac @@ -0,0 +1,140 @@ +What: /sys/devices/system/edac/mc/mc*/reset_counters +Date: January 2006 +Contact: linux-edac@vger.kernel.org +Description: This write-only control file will zero all the statistical + counters for UE and CE errors on the given memory controller. + Zeroing the counters will also reset the timer indicating how + long since the last counter were reset. This is useful for + computing errors/time. Since the counters are always reset + at driver initialization time, no module/kernel parameter + is available. + +What: /sys/devices/system/edac/mc/mc*/seconds_since_reset +Date: January 2006 +Contact: linux-edac@vger.kernel.org +Description: This attribute file displays how many seconds have elapsed + since the last counter reset. This can be used with the error + counters to measure error rates. + +What: /sys/devices/system/edac/mc/mc*/mc_name +Date: January 2006 +Contact: linux-edac@vger.kernel.org +Description: This attribute file displays the type of memory controller + that is being utilized. + +What: /sys/devices/system/edac/mc/mc*/size_mb +Date: January 2006 +Contact: linux-edac@vger.kernel.org +Description: This attribute file displays, in count of megabytes, of memory + that this memory controller manages. + +What: /sys/devices/system/edac/mc/mc*/ue_count +Date: January 2006 +Contact: linux-edac@vger.kernel.org +Description: This attribute file displays the total count of uncorrectable + errors that have occurred on this memory controller. If + panic_on_ue is set, this counter will not have a chance to + increment, since EDAC will panic the system + +What: /sys/devices/system/edac/mc/mc*/ue_noinfo_count +Date: January 2006 +Contact: linux-edac@vger.kernel.org +Description: This attribute file displays the number of UEs that have + occurred on this memory controller with no information as to + which DIMM slot is having errors. + +What: /sys/devices/system/edac/mc/mc*/ce_count +Date: January 2006 +Contact: linux-edac@vger.kernel.org +Description: This attribute file displays the total count of correctable + errors that have occurred on this memory controller. This + count is very important to examine. CEs provide early + indications that a DIMM is beginning to fail. This count + field should be monitored for non-zero values and report + such information to the system administrator. + +What: /sys/devices/system/edac/mc/mc*/ce_noinfo_count +Date: January 2006 +Contact: linux-edac@vger.kernel.org +Description: This attribute file displays the number of CEs that + have occurred on this memory controller wherewith no + information as to which DIMM slot is having errors. Memory is + handicapped, but operational, yet no information is available + to indicate which slot the failing memory is in. This count + field should be also be monitored for non-zero values. + +What: /sys/devices/system/edac/mc/mc*/sdram_scrub_rate +Date: February 2007 +Contact: linux-edac@vger.kernel.org +Description: Read/Write attribute file that controls memory scrubbing. + The scrubbing rate used by the memory controller is set by + writing a minimum bandwidth in bytes/sec to the attribute file. + The rate will be translated to an internal value that gives at + least the specified rate. + Reading the file will return the actual scrubbing rate employed. + If configuration fails or memory scrubbing is not implemented, + the value of the attribute file will be -1. + +What: /sys/devices/system/edac/mc/mc*/max_location +Date: April 2012 +Contact: Mauro Carvalho Chehab <mchehab@redhat.com> + linux-edac@vger.kernel.org +Description: This attribute file displays the information about the last + available memory slot in this memory controller. It is used by + userspace tools in order to display the memory filling layout. + +What: /sys/devices/system/edac/mc/mc*/(dimm|rank)*/size +Date: April 2012 +Contact: Mauro Carvalho Chehab <mchehab@redhat.com> + linux-edac@vger.kernel.org +Description: This attribute file will display the size of dimm or rank. + For dimm*/size, this is the size, in MB of the DIMM memory + stick. For rank*/size, this is the size, in MB for one rank + of the DIMM memory stick. On single rank memories (1R), this + is also the total size of the dimm. On dual rank (2R) memories, + this is half the size of the total DIMM memories. + +What: /sys/devices/system/edac/mc/mc*/(dimm|rank)*/dimm_dev_type +Date: April 2012 +Contact: Mauro Carvalho Chehab <mchehab@redhat.com> + linux-edac@vger.kernel.org +Description: This attribute file will display what type of DRAM device is + being utilized on this DIMM (x1, x2, x4, x8, ...). + +What: /sys/devices/system/edac/mc/mc*/(dimm|rank)*/dimm_edac_mode +Date: April 2012 +Contact: Mauro Carvalho Chehab <mchehab@redhat.com> + linux-edac@vger.kernel.org +Description: This attribute file will display what type of Error detection + and correction is being utilized. For example: S4ECD4ED would + mean a Chipkill with x4 DRAM. + +What: /sys/devices/system/edac/mc/mc*/(dimm|rank)*/dimm_label +Date: April 2012 +Contact: Mauro Carvalho Chehab <mchehab@redhat.com> + linux-edac@vger.kernel.org +Description: This control file allows this DIMM to have a label assigned + to it. With this label in the module, when errors occur + the output can provide the DIMM label in the system log. + This becomes vital for panic events to isolate the + cause of the UE event. + DIMM Labels must be assigned after booting, with information + that correctly identifies the physical slot with its + silk screen label. This information is currently very + motherboard specific and determination of this information + must occur in userland at this time. + +What: /sys/devices/system/edac/mc/mc*/(dimm|rank)*/dimm_location +Date: April 2012 +Contact: Mauro Carvalho Chehab <mchehab@redhat.com> + linux-edac@vger.kernel.org +Description: This attribute file will display the location (csrow/channel, + branch/channel/slot or channel/slot) of the dimm or rank. + +What: /sys/devices/system/edac/mc/mc*/(dimm|rank)*/dimm_mem_type +Date: April 2012 +Contact: Mauro Carvalho Chehab <mchehab@redhat.com> + linux-edac@vger.kernel.org +Description: This attribute file will display what type of memory is + currently on this csrow. Normally, either buffered or + unbuffered memory (for example, Unbuffered-DDR3). diff --git a/Documentation/ABI/testing/sysfs-platform-asus-wmi b/Documentation/ABI/testing/sysfs-platform-asus-wmi index 2e7df91620d..019e1e29370 100644 --- a/Documentation/ABI/testing/sysfs-platform-asus-wmi +++ b/Documentation/ABI/testing/sysfs-platform-asus-wmi @@ -29,3 +29,10 @@ KernelVersion: 2.6.39 Contact: "Corentin Chary" <corentincj@iksaif.net> Description: Control the card touchpad. 1 means on, 0 means off. + +What: /sys/devices/platform/<platform>/lid_resume +Date: May 2012 +KernelVersion: 3.5 +Contact: "AceLan Kao" <acelan.kao@canonical.com> +Description: + Resume on lid open. 1 means on, 0 means off. diff --git a/Documentation/DMA-attributes.txt b/Documentation/DMA-attributes.txt index 5c72eed8956..f50309081ac 100644 --- a/Documentation/DMA-attributes.txt +++ b/Documentation/DMA-attributes.txt @@ -49,3 +49,45 @@ DMA_ATTR_NON_CONSISTENT lets the platform to choose to return either consistent or non-consistent memory as it sees fit. By using this API, you are guaranteeing to the platform that you have all the correct and necessary sync points for this memory in the driver. + +DMA_ATTR_NO_KERNEL_MAPPING +-------------------------- + +DMA_ATTR_NO_KERNEL_MAPPING lets the platform to avoid creating a kernel +virtual mapping for the allocated buffer. On some architectures creating +such mapping is non-trivial task and consumes very limited resources +(like kernel virtual address space or dma consistent address space). +Buffers allocated with this attribute can be only passed to user space +by calling dma_mmap_attrs(). By using this API, you are guaranteeing +that you won't dereference the pointer returned by dma_alloc_attr(). You +can threat it as a cookie that must be passed to dma_mmap_attrs() and +dma_free_attrs(). Make sure that both of these also get this attribute +set on each call. + +Since it is optional for platforms to implement +DMA_ATTR_NO_KERNEL_MAPPING, those that do not will simply ignore the +attribute and exhibit default behavior. + +DMA_ATTR_SKIP_CPU_SYNC +---------------------- + +By default dma_map_{single,page,sg} functions family transfer a given +buffer from CPU domain to device domain. Some advanced use cases might +require sharing a buffer between more than one device. This requires +having a mapping created separately for each device and is usually +performed by calling dma_map_{single,page,sg} function more than once +for the given buffer with device pointer to each device taking part in +the buffer sharing. The first call transfers a buffer from 'CPU' domain +to 'device' domain, what synchronizes CPU caches for the given region +(usually it means that the cache has been flushed or invalidated +depending on the dma direction). However, next calls to +dma_map_{single,page,sg}() for other devices will perform exactly the +same sychronization operation on the CPU cache. CPU cache sychronization +might be a time consuming operation, especially if the buffers are +large, so it is highly recommended to avoid it if possible. +DMA_ATTR_SKIP_CPU_SYNC allows platform code to skip synchronization of +the CPU cache for the given buffer assuming that it has been already +transferred to 'device' domain. This attribute can be also used for +dma_unmap_{single,page,sg} functions family to force buffer to stay in +device domain after releasing a mapping for it. Use this attribute with +care! diff --git a/Documentation/DocBook/media/v4l/biblio.xml b/Documentation/DocBook/media/v4l/biblio.xml index 7c49facecd2..1078e45f189 100644 --- a/Documentation/DocBook/media/v4l/biblio.xml +++ b/Documentation/DocBook/media/v4l/biblio.xml @@ -194,7 +194,7 @@ in the frequency range from 87,5 to 108,0 MHz</title> <corpauthor>National Radio Systems Committee (<ulink url="http://www.nrscstandards.org">http://www.nrscstandards.org</ulink>)</corpauthor> </authorgroup> - <title>NTSC-4: United States RBDS Standard</title> + <title>NRSC-4: United States RBDS Standard</title> </biblioentry> <biblioentry id="iso12232"> diff --git a/Documentation/DocBook/media/v4l/common.xml b/Documentation/DocBook/media/v4l/common.xml index 4101aeb5654..b91d25313b6 100644 --- a/Documentation/DocBook/media/v4l/common.xml +++ b/Documentation/DocBook/media/v4l/common.xml @@ -464,14 +464,14 @@ The <structfield>type</structfield> field of the respective <structfield>tuner</structfield> field contains the index number of the tuner.</para> - <para>Radio devices have exactly one tuner with index zero, no + <para>Radio input devices have exactly one tuner with index zero, no video inputs.</para> <para>To query and change tuner properties applications use the &VIDIOC-G-TUNER; and &VIDIOC-S-TUNER; ioctl, respectively. The &v4l2-tuner; returned by <constant>VIDIOC_G_TUNER</constant> also contains signal status information applicable when the tuner of the -current video input, or a radio tuner is queried. Note that +current video or radio input is queried. Note that <constant>VIDIOC_S_TUNER</constant> does not switch the current tuner, when there is more than one at all. The tuner is solely determined by the current video input. Drivers must support both ioctls and set the @@ -491,8 +491,17 @@ the modulator. The <structfield>type</structfield> field of the respective &v4l2-output; returned by the &VIDIOC-ENUMOUTPUT; ioctl is set to <constant>V4L2_OUTPUT_TYPE_MODULATOR</constant> and its <structfield>modulator</structfield> field contains the index number -of the modulator. This specification does not define radio output -devices.</para> +of the modulator.</para> + + <para>Radio output devices have exactly one modulator with index +zero, no video outputs.</para> + + <para>A video or radio device cannot support both a tuner and a +modulator. Two separate device nodes will have to be used for such +hardware, one that supports the tuner functionality and one that supports +the modulator functionality. The reason is a limitation with the +&VIDIOC-S-FREQUENCY; ioctl where you cannot specify whether the frequency +is for a tuner or a modulator.</para> <para>To query and change modulator properties applications use the &VIDIOC-G-MODULATOR; and &VIDIOC-S-MODULATOR; ioctl. Note that diff --git a/Documentation/DocBook/media/v4l/compat.xml b/Documentation/DocBook/media/v4l/compat.xml index ea42ef82494..97b895151bb 100644 --- a/Documentation/DocBook/media/v4l/compat.xml +++ b/Documentation/DocBook/media/v4l/compat.xml @@ -2377,10 +2377,11 @@ that used it. It was originally scheduled for removal in 2.6.35. <para>V4L2_CTRL_FLAG_VOLATILE was added to signal volatile controls to userspace.</para> </listitem> <listitem> - <para>Add selection API for extended control over cropping and -composing. Does not affect the compatibility of current drivers and -applications. See <link linkend="selection-api"> selection API </link> for -details.</para> + <para>Add selection API for extended control over cropping + and composing. Does not affect the compatibility of current + drivers and applications. See <link + linkend="selection-api"> selection API </link> for + details.</para> </listitem> </orderedlist> </section> @@ -2458,6 +2459,18 @@ details.</para> </orderedlist> </section> + <section> + <title>V4L2 in Linux 3.5</title> + <orderedlist> + <listitem> + <para>Replaced <structfield>input</structfield> in + <structname>v4l2_buffer</structname> by + <structfield>reserved2</structfield> and removed + <constant>V4L2_BUF_FLAG_INPUT</constant>.</para> + </listitem> + </orderedlist> + </section> + <section id="other"> <title>Relation of V4L2 to other Linux multimedia APIs</title> diff --git a/Documentation/DocBook/media/v4l/dev-subdev.xml b/Documentation/DocBook/media/v4l/dev-subdev.xml index 4afcbbec5ed..a3d9dd09326 100644 --- a/Documentation/DocBook/media/v4l/dev-subdev.xml +++ b/Documentation/DocBook/media/v4l/dev-subdev.xml @@ -276,7 +276,7 @@ </para> </section> - <section> + <section id="v4l2-subdev-selections"> <title>Selections: cropping, scaling and composition</title> <para>Many sub-devices support cropping frames on their input or output @@ -290,8 +290,8 @@ size. Both the coordinates and sizes are expressed in pixels.</para> <para>As for pad formats, drivers store try and active - rectangles for the selection targets of ACTUAL type <xref - linkend="v4l2-subdev-selection-targets">.</xref></para> + rectangles for the selection targets <xref + linkend="v4l2-selections-common" />.</para> <para>On sink pads, cropping is applied relative to the current pad format. The pad format represents the image size as @@ -308,7 +308,7 @@ <para>Scaling support is optional. When supported by a subdev, the crop rectangle on the subdev's sink pad is scaled to the size configured using the &VIDIOC-SUBDEV-S-SELECTION; IOCTL - using <constant>V4L2_SUBDEV_SEL_COMPOSE_ACTUAL</constant> + using <constant>V4L2_SEL_TGT_COMPOSE</constant> selection target on the same pad. If the subdev supports scaling but not composing, the top and left values are not used and must always be set to zero.</para> @@ -323,32 +323,32 @@ <para>The drivers should always use the closest possible rectangle the user requests on all selection targets, unless specifically told otherwise. - <constant>V4L2_SUBDEV_SEL_FLAG_SIZE_GE</constant> and - <constant>V4L2_SUBDEV_SEL_FLAG_SIZE_LE</constant> flags may be + <constant>V4L2_SEL_FLAG_GE</constant> and + <constant>V4L2_SEL_FLAG_LE</constant> flags may be used to round the image size either up or down. <xref - linkend="v4l2-subdev-selection-flags"></xref></para> + linkend="v4l2-selection-flags" /></para> </section> <section> <title>Types of selection targets</title> <section> - <title>ACTUAL targets</title> + <title>Actual targets</title> - <para>ACTUAL targets reflect the actual hardware configuration - at any point of time. There is a BOUNDS target - corresponding to every ACTUAL.</para> + <para>Actual targets (without a postfix) reflect the actual + hardware configuration at any point of time. There is a BOUNDS + target corresponding to every actual target.</para> </section> <section> <title>BOUNDS targets</title> - <para>BOUNDS targets is the smallest rectangle that contains - all valid ACTUAL rectangles. It may not be possible to set the - ACTUAL rectangle as large as the BOUNDS rectangle, however. - This may be because e.g. a sensor's pixel array is not - rectangular but cross-shaped or round. The maximum size may - also be smaller than the BOUNDS rectangle.</para> + <para>BOUNDS targets is the smallest rectangle that contains all + valid actual rectangles. It may not be possible to set the actual + rectangle as large as the BOUNDS rectangle, however. This may be + because e.g. a sensor's pixel array is not rectangular but + cross-shaped or round. The maximum size may also be smaller than the + BOUNDS rectangle.</para> </section> </section> @@ -362,7 +362,7 @@ performed by the user: the changes made will be propagated to any subsequent stages. If this behaviour is not desired, the user must set - <constant>V4L2_SUBDEV_SEL_FLAG_KEEP_CONFIG</constant> flag. This + <constant>V4L2_SEL_FLAG_KEEP_CONFIG</constant> flag. This flag causes no propagation of the changes are allowed in any circumstances. This may also cause the accessed rectangle to be adjusted by the driver, depending on the properties of the diff --git a/Documentation/DocBook/media/v4l/io.xml b/Documentation/DocBook/media/v4l/io.xml index fd6aca2922b..1885cc0755c 100644 --- a/Documentation/DocBook/media/v4l/io.xml +++ b/Documentation/DocBook/media/v4l/io.xml @@ -683,14 +683,12 @@ memory, set by the application. See <xref linkend="userp" /> for details. </row> <row> <entry>__u32</entry> - <entry><structfield>input</structfield></entry> + <entry><structfield>reserved2</structfield></entry> <entry></entry> - <entry>Some video capture drivers support rapid and -synchronous video input changes, a function useful for example in -video surveillance applications. For this purpose applications set the -<constant>V4L2_BUF_FLAG_INPUT</constant> flag, and this field to the -number of a video input as in &v4l2-input; field -<structfield>index</structfield>.</entry> + <entry>A place holder for future extensions and custom +(driver defined) buffer types +<constant>V4L2_BUF_TYPE_PRIVATE</constant> and higher. Applications +should set this to 0.</entry> </row> <row> <entry>__u32</entry> @@ -923,13 +921,6 @@ Drivers set or clear this flag when the <constant>VIDIOC_DQBUF</constant> ioctl is called.</entry> </row> <row> - <entry><constant>V4L2_BUF_FLAG_INPUT</constant></entry> - <entry>0x0200</entry> - <entry>The <structfield>input</structfield> field is valid. -Applications set or clear this flag before calling the -<constant>VIDIOC_QBUF</constant> ioctl.</entry> - </row> - <row> <entry><constant>V4L2_BUF_FLAG_PREPARED</constant></entry> <entry>0x0400</entry> <entry>The buffer has been prepared for I/O and can be queued by the diff --git a/Documentation/DocBook/media/v4l/selection-api.xml b/Documentation/DocBook/media/v4l/selection-api.xml index b299e477935..e7ed5077834 100644 --- a/Documentation/DocBook/media/v4l/selection-api.xml +++ b/Documentation/DocBook/media/v4l/selection-api.xml @@ -53,11 +53,11 @@ cropping and composing rectangles have the same size.</para> </mediaobject> </figure> -For complete list of the available selection targets see table <xref -linkend="v4l2-sel-target"/> - </section> + See <xref linkend="v4l2-selection-targets" /> for more + information. + <section> <title>Configuration</title> @@ -74,7 +74,7 @@ cropping/composing rectangles may have to be aligned, and both the source and the sink may have arbitrary upper and lower size limits. Therefore, as usual, drivers are expected to adjust the requested parameters and return the actual values selected. An application can control the rounding behaviour using <link -linkend="v4l2-sel-flags"> constraint flags </link>.</para> +linkend="v4l2-selection-flags"> constraint flags </link>.</para> <section> @@ -91,7 +91,7 @@ top/left corner at position <constant> (0,0) </constant>. The rectangle's coordinates are expressed in pixels.</para> <para>The top left corner, width and height of the source rectangle, that is -the area actually sampled, is given by the <constant> V4L2_SEL_TGT_CROP_ACTIVE +the area actually sampled, is given by the <constant> V4L2_SEL_TGT_CROP </constant> target. It uses the same coordinate system as <constant> V4L2_SEL_TGT_CROP_BOUNDS </constant>. The active cropping area must lie completely inside the capture boundaries. The driver may further adjust the @@ -111,13 +111,13 @@ height are equal to the image size set by <constant> VIDIOC_S_FMT </constant>. </para> <para>The part of a buffer into which the image is inserted by the hardware is -controlled by the <constant> V4L2_SEL_TGT_COMPOSE_ACTIVE </constant> target. +controlled by the <constant> V4L2_SEL_TGT_COMPOSE </constant> target. The rectangle's coordinates are also expressed in the same coordinate system as the bounds rectangle. The composing rectangle must lie completely inside bounds rectangle. The driver must adjust the composing rectangle to fit to the bounding limits. Moreover, the driver can perform other adjustments according to hardware limitations. The application can control rounding behaviour using -<link linkend="v4l2-sel-flags"> constraint flags </link>.</para> +<link linkend="v4l2-selection-flags"> constraint flags </link>.</para> <para>For capture devices the default composing rectangle is queried using <constant> V4L2_SEL_TGT_COMPOSE_DEFAULT </constant>. It is usually equal to the @@ -125,7 +125,7 @@ bounding rectangle.</para> <para>The part of a buffer that is modified by the hardware is given by <constant> V4L2_SEL_TGT_COMPOSE_PADDED </constant>. It contains all pixels -defined using <constant> V4L2_SEL_TGT_COMPOSE_ACTIVE </constant> plus all +defined using <constant> V4L2_SEL_TGT_COMPOSE </constant> plus all padding data modified by hardware during insertion process. All pixels outside this rectangle <emphasis>must not</emphasis> be changed by the hardware. The content of pixels that lie inside the padded area but outside active area is @@ -153,7 +153,7 @@ specified using <constant> VIDIOC_S_FMT </constant> ioctl.</para> <para>The top left corner, width and height of the source rectangle, that is the area from which image date are processed by the hardware, is given by the -<constant> V4L2_SEL_TGT_CROP_ACTIVE </constant>. Its coordinates are expressed +<constant> V4L2_SEL_TGT_CROP </constant>. Its coordinates are expressed in in the same coordinate system as the bounds rectangle. The active cropping area must lie completely inside the crop boundaries and the driver may further adjust the requested size and/or position according to hardware @@ -165,7 +165,7 @@ bounding rectangle.</para> <para>The part of a video signal or graphics display where the image is inserted by the hardware is controlled by <constant> -V4L2_SEL_TGT_COMPOSE_ACTIVE </constant> target. The rectangle's coordinates +V4L2_SEL_TGT_COMPOSE </constant> target. The rectangle's coordinates are expressed in pixels. The composing rectangle must lie completely inside the bounds rectangle. The driver must adjust the area to fit to the bounding limits. Moreover, the driver can perform other adjustments according to @@ -184,7 +184,7 @@ such a padded area is driver-dependent feature not covered by this document. Driver developers are encouraged to keep padded rectangle equal to active one. The padded target is accessed by the <constant> V4L2_SEL_TGT_COMPOSE_PADDED </constant> identifier. It must contain all pixels from the <constant> -V4L2_SEL_TGT_COMPOSE_ACTIVE </constant> target.</para> +V4L2_SEL_TGT_COMPOSE </constant> target.</para> </section> @@ -193,8 +193,8 @@ V4L2_SEL_TGT_COMPOSE_ACTIVE </constant> target.</para> <title>Scaling control</title> <para>An application can detect if scaling is performed by comparing the width -and the height of rectangles obtained using <constant> V4L2_SEL_TGT_CROP_ACTIVE -</constant> and <constant> V4L2_SEL_TGT_COMPOSE_ACTIVE </constant> targets. If +and the height of rectangles obtained using <constant> V4L2_SEL_TGT_CROP +</constant> and <constant> V4L2_SEL_TGT_COMPOSE </constant> targets. If these are not equal then the scaling is applied. The application can compute the scaling ratios using these values.</para> @@ -252,7 +252,7 @@ area)</para> ret = ioctl(fd, &VIDIOC-G-SELECTION;, &sel); if (ret) exit(-1); - sel.target = V4L2_SEL_TGT_CROP_ACTIVE; + sel.target = V4L2_SEL_TGT_CROP; ret = ioctl(fd, &VIDIOC-S-SELECTION;, &sel); if (ret) exit(-1); @@ -281,7 +281,7 @@ area)</para> r.left = sel.r.width / 4; r.top = sel.r.height / 4; sel.r = r; - sel.target = V4L2_SEL_TGT_COMPOSE_ACTIVE; + sel.target = V4L2_SEL_TGT_COMPOSE; sel.flags = V4L2_SEL_FLAG_LE; ret = ioctl(fd, &VIDIOC-S-SELECTION;, &sel); if (ret) @@ -298,11 +298,11 @@ V4L2_BUF_TYPE_VIDEO_OUTPUT </constant> for other devices</para> &v4l2-selection; compose = { .type = V4L2_BUF_TYPE_VIDEO_OUTPUT, - .target = V4L2_SEL_TGT_COMPOSE_ACTIVE, + .target = V4L2_SEL_TGT_COMPOSE, }; &v4l2-selection; crop = { .type = V4L2_BUF_TYPE_VIDEO_OUTPUT, - .target = V4L2_SEL_TGT_CROP_ACTIVE, + .target = V4L2_SEL_TGT_CROP, }; double hscale, vscale; diff --git a/Documentation/DocBook/media/v4l/selections-common.xml b/Documentation/DocBook/media/v4l/selections-common.xml new file mode 100644 index 00000000000..7502f784b8c --- /dev/null +++ b/Documentation/DocBook/media/v4l/selections-common.xml @@ -0,0 +1,164 @@ +<section id="v4l2-selections-common"> + + <title>Common selection definitions</title> + + <para>While the <link linkend="selection-api">V4L2 selection + API</link> and <link linkend="v4l2-subdev-selections">V4L2 subdev + selection APIs</link> are very similar, there's one fundamental + difference between the two. On sub-device API, the selection + rectangle refers to the media bus format, and is bound to a + sub-device's pad. On the V4L2 interface the selection rectangles + refer to the in-memory pixel format.</para> + + <para>This section defines the common definitions of the + selection interfaces on the two APIs.</para> + + <section id="v4l2-selection-targets"> + + <title>Selection targets</title> + + <para>The precise meaning of the selection targets may be + dependent on which of the two interfaces they are used.</para> + + <table pgwide="1" frame="none" id="v4l2-selection-targets-table"> + <title>Selection target definitions</title> + <tgroup cols="5"> + <colspec colname="c1" /> + <colspec colname="c2" /> + <colspec colname="c3" /> + <colspec colname="c4" /> + <colspec colname="c5" /> + &cs-def; + <thead> + <row rowsep="1"> + <entry align="left">Target name</entry> + <entry align="left">id</entry> + <entry align="left">Definition</entry> + <entry align="left">Valid for V4L2</entry> + <entry align="left">Valid for V4L2 subdev</entry> + </row> + </thead> + <tbody valign="top"> + <row> + <entry><constant>V4L2_SEL_TGT_CROP</constant></entry> + <entry>0x0000</entry> + <entry>Crop rectangle. Defines the cropped area.</entry> + <entry>Yes</entry> + <entry>Yes</entry> + </row> + <row> + <entry><constant>V4L2_SEL_TGT_CROP_DEFAULT</constant></entry> + <entry>0x0001</entry> + <entry>Suggested cropping rectangle that covers the "whole picture".</entry> + <entry>Yes</entry> + <entry>No</entry> + </row> + <row> + <entry><constant>V4L2_SEL_TGT_CROP_BOUNDS</constant></entry> + <entry>0x0002</entry> + <entry>Bounds of the crop rectangle. All valid crop + rectangles fit inside the crop bounds rectangle. + </entry> + <entry>Yes</entry> + <entry>Yes</entry> + </row> + <row> + <entry><constant>V4L2_SEL_TGT_COMPOSE</constant></entry> + <entry>0x0100</entry> + <entry>Compose rectangle. Used to configure scaling + and composition.</entry> + <entry>Yes</entry> + <entry>Yes</entry> + </row> + <row> + <entry><constant>V4L2_SEL_TGT_COMPOSE_DEFAULT</constant></entry> + <entry>0x0101</entry> + <entry>Suggested composition rectangle that covers the "whole picture".</entry> + <entry>Yes</entry> + <entry>No</entry> + </row> + <row> + <entry><constant>V4L2_SEL_TGT_COMPOSE_BOUNDS</constant></entry> + <entry>0x0102</entry> + <entry>Bounds of the compose rectangle. All valid compose + rectangles fit inside the compose bounds rectangle.</entry> + <entry>Yes</entry> + <entry>Yes</entry> + </row> + <row> + <entry><constant>V4L2_SEL_TGT_COMPOSE_PADDED</constant></entry> + <entry>0x0103</entry> + <entry>The active area and all padding pixels that are inserted or + modified by hardware.</entry> + <entry>Yes</entry> + <entry>No</entry> + </row> + </tbody> + </tgroup> + </table> + + </section> + + <section id="v4l2-selection-flags"> + + <title>Selection flags</title> + + <table pgwide="1" frame="none" id="v4l2-selection-flags-table"> + <title>Selection flag definitions</title> + <tgroup cols="5"> + <colspec colname="c1" /> + <colspec colname="c2" /> + <colspec colname="c3" /> + <colspec colname="c4" /> + <colspec colname="c5" /> + &cs-def; + <thead> + <row rowsep="1"> + <entry align="left">Flag name</entry> + <entry align="left">id</entry> + <entry align="left">Definition</entry> + <entry align="left">Valid for V4L2</entry> + <entry align="left">Valid for V4L2 subdev</entry> + </row> + </thead> + <tbody valign="top"> + <row> + <entry><constant>V4L2_SEL_FLAG_GE</constant></entry> + <entry>(1 << 0)</entry> + <entry>Suggest the driver it should choose greater or + equal rectangle (in size) than was requested. Albeit the + driver may choose a lesser size, it will only do so due to + hardware limitations. Without this flag (and + <constant>V4L2_SEL_FLAG_LE</constant>) the + behaviour is to choose the closest possible + rectangle.</entry> + <entry>Yes</entry> + <entry>Yes</entry> + </row> + <row> + <entry><constant>V4L2_SEL_FLAG_LE</constant></entry> + <entry>(1 << 1)</entry> + <entry>Suggest the driver it + should choose lesser or equal rectangle (in size) than was + requested. Albeit the driver may choose a greater size, it + will only do so due to hardware limitations.</entry> + <entry>Yes</entry> + <entry>Yes</entry> + </row> + <row> + <entry><constant>V4L2_SEL_FLAG_KEEP_CONFIG</constant></entry> + <entry>(1 << 2)</entry> + <entry>The configuration must not be propagated to any + further processing steps. If this flag is not given, the + configuration is propagated inside the subdevice to all + further processing steps.</entry> + <entry>No</entry> + <entry>Yes</entry> + </row> + </tbody> + </tgroup> + </table> + + </section> + +</section> diff --git a/Documentation/DocBook/media/v4l/v4l2.xml b/Documentation/DocBook/media/v4l/v4l2.xml index 008c2d73a48..36bafc48e03 100644 --- a/Documentation/DocBook/media/v4l/v4l2.xml +++ b/Documentation/DocBook/media/v4l/v4l2.xml @@ -589,6 +589,11 @@ and discussions on the V4L mailing list.</revremark> &sub-write; </appendix> + <appendix> + <title>Common definitions for V4L2 and V4L2 subdev interfaces</title> + &sub-selections-common; + </appendix> + <appendix id="videodev"> <title>Video For Linux Two Header File</title> &sub-videodev2-h; diff --git a/Documentation/DocBook/media/v4l/vidioc-create-bufs.xml b/Documentation/DocBook/media/v4l/vidioc-create-bufs.xml index a2474ecb574..5e73b1c8d09 100644 --- a/Documentation/DocBook/media/v4l/vidioc-create-bufs.xml +++ b/Documentation/DocBook/media/v4l/vidioc-create-bufs.xml @@ -97,7 +97,13 @@ information.</para> <row> <entry>__u32</entry> <entry><structfield>count</structfield></entry> - <entry>The number of buffers requested or granted.</entry> + <entry>The number of buffers requested or granted. If count == 0, then + <constant>VIDIOC_CREATE_BUFS</constant> will set <structfield>index</structfield> + to the current number of created buffers, and it will check the validity of + <structfield>memory</structfield> and <structfield>format.type</structfield>. + If those are invalid -1 is returned and errno is set to &EINVAL;, + otherwise <constant>VIDIOC_CREATE_BUFS</constant> returns 0. It will + never set errno to &EBUSY; in this particular case.</entry> </row> <row> <entry>__u32</entry> diff --git a/Documentation/DocBook/media/v4l/vidioc-g-frequency.xml b/Documentation/DocBook/media/v4l/vidioc-g-frequency.xml index 69c178a4d20..40e58a42eb2 100644 --- a/Documentation/DocBook/media/v4l/vidioc-g-frequency.xml +++ b/Documentation/DocBook/media/v4l/vidioc-g-frequency.xml @@ -135,6 +135,12 @@ bounds or the value in the <structfield>type</structfield> field is wrong.</para> </listitem> </varlistentry> + <varlistentry> + <term><errorcode>EBUSY</errorcode></term> + <listitem> + <para>A hardware seek is in progress.</para> + </listitem> + </varlistentry> </variablelist> </refsect1> </refentry> diff --git a/Documentation/DocBook/media/v4l/vidioc-g-selection.xml b/Documentation/DocBook/media/v4l/vidioc-g-selection.xml index bb04eff75f4..f76d8a6d9b9 100644 --- a/Documentation/DocBook/media/v4l/vidioc-g-selection.xml +++ b/Documentation/DocBook/media/v4l/vidioc-g-selection.xml @@ -65,9 +65,9 @@ Do not use multiplanar buffers. Use <constant> V4L2_BUF_TYPE_VIDEO_CAPTURE </constant>. Use <constant> V4L2_BUF_TYPE_VIDEO_OUTPUT </constant> instead of <constant> V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE </constant>. The next step is setting the value of &v4l2-selection; <structfield>target</structfield> field -to <constant> V4L2_SEL_TGT_CROP_ACTIVE </constant> (<constant> -V4L2_SEL_TGT_COMPOSE_ACTIVE </constant>). Please refer to table <xref -linkend="v4l2-sel-target" /> or <xref linkend="selection-api" /> for additional +to <constant> V4L2_SEL_TGT_CROP </constant> (<constant> +V4L2_SEL_TGT_COMPOSE </constant>). Please refer to table <xref +linkend="v4l2-selections-common" /> or <xref linkend="selection-api" /> for additional targets. The <structfield>flags</structfield> and <structfield>reserved </structfield> fields of &v4l2-selection; are ignored and they must be filled with zeros. The driver fills the rest of the structure or @@ -86,9 +86,9 @@ use multiplanar buffers. Use <constant> V4L2_BUF_TYPE_VIDEO_CAPTURE </constant>. Use <constant> V4L2_BUF_TYPE_VIDEO_OUTPUT </constant> instead of <constant> V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE </constant>. The next step is setting the value of &v4l2-selection; <structfield>target</structfield> to -<constant>V4L2_SEL_TGT_CROP_ACTIVE</constant> (<constant> -V4L2_SEL_TGT_COMPOSE_ACTIVE </constant>). Please refer to table <xref -linkend="v4l2-sel-target" /> or <xref linkend="selection-api" /> for additional +<constant>V4L2_SEL_TGT_CROP</constant> (<constant> +V4L2_SEL_TGT_COMPOSE </constant>). Please refer to table <xref +linkend="v4l2-selections-common" /> or <xref linkend="selection-api" /> for additional targets. The &v4l2-rect; <structfield>r</structfield> rectangle need to be set to the desired active area. Field &v4l2-selection; <structfield> reserved </structfield> is ignored and must be filled with zeros. The driver may adjust @@ -154,74 +154,8 @@ exist no rectangle </emphasis> that satisfies the constraints.</para> </refsect1> - <refsect1> - <table frame="none" pgwide="1" id="v4l2-sel-target"> - <title>Selection targets.</title> - <tgroup cols="3"> - &cs-def; - <tbody valign="top"> - <row> - <entry><constant>V4L2_SEL_TGT_CROP_ACTIVE</constant></entry> - <entry>0x0000</entry> - <entry>The area that is currently cropped by hardware.</entry> - </row> - <row> - <entry><constant>V4L2_SEL_TGT_CROP_DEFAULT</constant></entry> - <entry>0x0001</entry> - <entry>Suggested cropping rectangle that covers the "whole picture".</entry> - </row> - <row> - <entry><constant>V4L2_SEL_TGT_CROP_BOUNDS</constant></entry> - <entry>0x0002</entry> - <entry>Limits for the cropping rectangle.</entry> - </row> - <row> - <entry><constant>V4L2_SEL_TGT_COMPOSE_ACTIVE</constant></entry> - <entry>0x0100</entry> - <entry>The area to which data is composed by hardware.</entry> - </row> - <row> - <entry><constant>V4L2_SEL_TGT_COMPOSE_DEFAULT</constant></entry> - <entry>0x0101</entry> - <entry>Suggested composing rectangle that covers the "whole picture".</entry> - </row> - <row> - <entry><constant>V4L2_SEL_TGT_COMPOSE_BOUNDS</constant></entry> - <entry>0x0102</entry> - <entry>Limits for the composing rectangle.</entry> - </row> - <row> - <entry><constant>V4L2_SEL_TGT_COMPOSE_PADDED</constant></entry> - <entry>0x0103</entry> - <entry>The active area and all padding pixels that are inserted or modified by hardware.</entry> - </row> - </tbody> - </tgroup> - </table> - </refsect1> - - <refsect1> - <table frame="none" pgwide="1" id="v4l2-sel-flags"> - <title>Selection constraint flags</title> - <tgroup cols="3"> - &cs-def; - <tbody valign="top"> - <row> - <entry><constant>V4L2_SEL_FLAG_GE</constant></entry> - <entry>0x00000001</entry> - <entry>Indicates that the adjusted rectangle must contain the original - &v4l2-selection; <structfield>r</structfield> rectangle.</entry> - </row> - <row> - <entry><constant>V4L2_SEL_FLAG_LE</constant></entry> - <entry>0x00000002</entry> - <entry>Indicates that the adjusted rectangle must be inside the original - &v4l2-rect; <structfield>r</structfield> rectangle.</entry> - </row> - </tbody> - </tgroup> - </table> - </refsect1> + <para>Selection targets and flags are documented in <xref + linkend="v4l2-selections-common"/>.</para> <section> <figure id="sel-const-adjust"> @@ -252,14 +186,14 @@ exist no rectangle </emphasis> that satisfies the constraints.</para> <row> <entry>__u32</entry> <entry><structfield>target</structfield></entry> - <entry>Used to select between <link linkend="v4l2-sel-target"> cropping + <entry>Used to select between <link linkend="v4l2-selections-common"> cropping and composing rectangles</link>.</entry> </row> <row> <entry>__u32</entry> <entry><structfield>flags</structfield></entry> <entry>Flags controlling the selection rectangle adjustments, refer to - <link linkend="v4l2-sel-flags">selection flags</link>.</entry> + <link linkend="v4l2-selection-flags">selection flags</link>.</entry> </row> <row> <entry>&v4l2-rect;</entry> diff --git a/Documentation/DocBook/media/v4l/vidioc-g-tuner.xml b/Documentation/DocBook/media/v4l/vidioc-g-tuner.xml index 62a1aa200a3..95d5371c170 100644 --- a/Documentation/DocBook/media/v4l/vidioc-g-tuner.xml +++ b/Documentation/DocBook/media/v4l/vidioc-g-tuner.xml @@ -276,6 +276,18 @@ can or must be switched. (B/G PAL tuners for example are typically not <constant>V4L2_TUNER_ANALOG_TV</constant> tuners can have this capability.</entry> </row> <row> + <entry><constant>V4L2_TUNER_CAP_HWSEEK_BOUNDED</constant></entry> + <entry>0x0004</entry> + <entry>If set, then this tuner supports the hardware seek functionality + where the seek stops when it reaches the end of the frequency range.</entry> + </row> + <row> + <entry><constant>V4L2_TUNER_CAP_HWSEEK_WRAP</constant></entry> + <entry>0x0008</entry> + <entry>If set, then this tuner supports the hardware seek functionality + where the seek wraps around when it reaches the end of the frequency range.</entry> + </row> + <row> <entry><constant>V4L2_TUNER_CAP_STEREO</constant></entry> <entry>0x0010</entry> <entry>Stereo audio reception is supported.</entry> diff --git a/Documentation/DocBook/media/v4l/vidioc-qbuf.xml b/Documentation/DocBook/media/v4l/vidioc-qbuf.xml index 9caa49af580..77ff5be0809 100644 --- a/Documentation/DocBook/media/v4l/vidioc-qbuf.xml +++ b/Documentation/DocBook/media/v4l/vidioc-qbuf.xml @@ -71,12 +71,9 @@ initialize the <structfield>bytesused</structfield>, <structfield>field</structfield> and <structfield>timestamp</structfield> fields, see <xref linkend="buffer" /> for details. -Applications must also set <structfield>flags</structfield> to 0. If a driver -supports capturing from specific video inputs and you want to specify a video -input, then <structfield>flags</structfield> should be set to -<constant>V4L2_BUF_FLAG_INPUT</constant> and the field -<structfield>input</structfield> must be initialized to the desired input. -The <structfield>reserved</structfield> field must be set to 0. When using +Applications must also set <structfield>flags</structfield> to 0. +The <structfield>reserved2</structfield> and +<structfield>reserved</structfield> fields must be set to 0. When using the <link linkend="planar-apis">multi-planar API</link>, the <structfield>m.planes</structfield> field must contain a userspace pointer to a filled-in array of &v4l2-plane; and the <structfield>length</structfield> diff --git a/Documentation/DocBook/media/v4l/vidioc-s-hw-freq-seek.xml b/Documentation/DocBook/media/v4l/vidioc-s-hw-freq-seek.xml index 407dfceb71f..f4db44d0d95 100644 --- a/Documentation/DocBook/media/v4l/vidioc-s-hw-freq-seek.xml +++ b/Documentation/DocBook/media/v4l/vidioc-s-hw-freq-seek.xml @@ -58,6 +58,9 @@ To do this applications initialize the <structfield>tuner</structfield>, call the <constant>VIDIOC_S_HW_FREQ_SEEK</constant> ioctl with a pointer to this structure.</para> + <para>If an error is returned, then the original frequency will + be restored.</para> + <para>This ioctl is supported if the <constant>V4L2_CAP_HW_FREQ_SEEK</constant> capability is set.</para> <table pgwide="1" frame="none" id="v4l2-hw-freq-seek"> @@ -87,7 +90,10 @@ field and the &v4l2-tuner; <structfield>index</structfield> field.</entry> <row> <entry>__u32</entry> <entry><structfield>wrap_around</structfield></entry> - <entry>If non-zero, wrap around when at the end of the frequency range, else stop seeking.</entry> + <entry>If non-zero, wrap around when at the end of the frequency range, else stop seeking. + The &v4l2-tuner; <structfield>capability</structfield> field will tell you what the + hardware supports. + </entry> </row> <row> <entry>__u32</entry> @@ -118,9 +124,15 @@ wrong.</para> </listitem> </varlistentry> <varlistentry> - <term><errorcode>EAGAIN</errorcode></term> + <term><errorcode>ENODATA</errorcode></term> + <listitem> + <para>The hardware seek found no channels.</para> + </listitem> + </varlistentry> + <varlistentry> + <term><errorcode>EBUSY</errorcode></term> <listitem> - <para>The ioctl timed-out. Try again.</para> + <para>Another hardware seek is already in progress.</para> </listitem> </varlistentry> </variablelist> diff --git a/Documentation/DocBook/media/v4l/vidioc-subdev-g-selection.xml b/Documentation/DocBook/media/v4l/vidioc-subdev-g-selection.xml index 208e9f0da3f..f33cc814a01 100644 --- a/Documentation/DocBook/media/v4l/vidioc-subdev-g-selection.xml +++ b/Documentation/DocBook/media/v4l/vidioc-subdev-g-selection.xml @@ -72,10 +72,10 @@ <section> <title>Types of selection targets</title> - <para>There are two types of selection targets: actual and bounds. - The ACTUAL targets are the targets which configure the hardware. - The BOUNDS target will return a rectangle that contain all - possible ACTUAL rectangles.</para> + <para>There are two types of selection targets: actual and bounds. The + actual targets are the targets which configure the hardware. The BOUNDS + target will return a rectangle that contain all possible actual + rectangles.</para> </section> <section> @@ -87,71 +87,8 @@ <constant>EINVAL</constant>.</para> </section> - <table pgwide="1" frame="none" id="v4l2-subdev-selection-targets"> - <title>V4L2 subdev selection targets</title> - <tgroup cols="3"> - &cs-def; - <tbody valign="top"> - <row> - <entry><constant>V4L2_SUBDEV_SEL_TGT_CROP_ACTUAL</constant></entry> - <entry>0x0000</entry> - <entry>Actual crop. Defines the cropping - performed by the processing step.</entry> - </row> - <row> - <entry><constant>V4L2_SUBDEV_SEL_TGT_CROP_BOUNDS</constant></entry> - <entry>0x0002</entry> - <entry>Bounds of the crop rectangle.</entry> - </row> - <row> - <entry><constant>V4L2_SUBDEV_SEL_TGT_COMPOSE_ACTUAL</constant></entry> - <entry>0x0100</entry> - <entry>Actual compose rectangle. Used to configure scaling - on sink pads and composition on source pads.</entry> - </row> - <row> - <entry><constant>V4L2_SUBDEV_SEL_TGT_COMPOSE_BOUNDS</constant></entry> - <entry>0x0102</entry> - <entry>Bounds of the compose rectangle.</entry> - </row> - </tbody> - </tgroup> - </table> - - <table pgwide="1" frame="none" id="v4l2-subdev-selection-flags"> - <title>V4L2 subdev selection flags</title> - <tgroup cols="3"> - &cs-def; - <tbody valign="top"> - <row> - <entry><constant>V4L2_SUBDEV_SEL_FLAG_SIZE_GE</constant></entry> - <entry>(1 << 0)</entry> <entry>Suggest the driver it - should choose greater or equal rectangle (in size) than - was requested. Albeit the driver may choose a lesser size, - it will only do so due to hardware limitations. Without - this flag (and - <constant>V4L2_SUBDEV_SEL_FLAG_SIZE_LE</constant>) the - behaviour is to choose the closest possible - rectangle.</entry> - </row> - <row> - <entry><constant>V4L2_SUBDEV_SEL_FLAG_SIZE_LE</constant></entry> - <entry>(1 << 1)</entry> <entry>Suggest the driver it - should choose lesser or equal rectangle (in size) than was - requested. Albeit the driver may choose a greater size, it - will only do so due to hardware limitations.</entry> - </row> - <row> - <entry><constant>V4L2_SUBDEV_SEL_FLAG_KEEP_CONFIG</constant></entry> - <entry>(1 << 2)</entry> - <entry>The configuration should not be propagated to any - further processing steps. If this flag is not given, the - configuration is propagated inside the subdevice to all - further processing steps.</entry> - </row> - </tbody> - </tgroup> - </table> + <para>Selection targets and flags are documented in <xref + linkend="v4l2-selections-common"/>.</para> <table pgwide="1" frame="none" id="v4l2-subdev-selection"> <title>struct <structname>v4l2_subdev_selection</structname></title> @@ -173,13 +110,13 @@ <entry>__u32</entry> <entry><structfield>target</structfield></entry> <entry>Target selection rectangle. See - <xref linkend="v4l2-subdev-selection-targets">.</xref>.</entry> + <xref linkend="v4l2-selections-common" />.</entry> </row> <row> <entry>__u32</entry> <entry><structfield>flags</structfield></entry> <entry>Flags. See - <xref linkend="v4l2-subdev-selection-flags">.</xref></entry> + <xref linkend="v4l2-selection-flags" />.</entry> </row> <row> <entry>&v4l2-rect;</entry> diff --git a/Documentation/device-mapper/striped.txt b/Documentation/device-mapper/striped.txt index f34d3236b9d..45f3b91ea4c 100644 --- a/Documentation/device-mapper/striped.txt +++ b/Documentation/device-mapper/striped.txt @@ -9,15 +9,14 @@ devices in parallel. Parameters: <num devs> <chunk size> [<dev path> <offset>]+ <num devs>: Number of underlying devices. - <chunk size>: Size of each chunk of data. Must be a power-of-2 and at - least as large as the system's PAGE_SIZE. + <chunk size>: Size of each chunk of data. Must be at least as + large as the system's PAGE_SIZE. <dev path>: Full pathname to the underlying block-device, or a "major:minor" device-number. <offset>: Starting sector within the device. One or more underlying devices can be specified. The striped device size must -be a multiple of the chunk size and a multiple of the number of underlying -devices. +be a multiple of the chunk size multiplied by the number of underlying devices. Example scripts diff --git a/Documentation/device-mapper/thin-provisioning.txt b/Documentation/device-mapper/thin-provisioning.txt index f5cfc62b7ad..30b8b83bd33 100644 --- a/Documentation/device-mapper/thin-provisioning.txt +++ b/Documentation/device-mapper/thin-provisioning.txt @@ -231,6 +231,9 @@ i) Constructor no_discard_passdown: Don't pass discards down to the underlying data device, but just remove the mapping. + read_only: Don't allow any changes to be made to the pool + metadata. + Data block size must be between 64KB (128 sectors) and 1GB (2097152 sectors) inclusive. @@ -239,7 +242,7 @@ ii) Status <transaction id> <used metadata blocks>/<total metadata blocks> <used data blocks>/<total data blocks> <held metadata root> - + [no_]discard_passdown ro|rw transaction id: A 64-bit number used by userspace to help synchronise with metadata @@ -257,6 +260,21 @@ ii) Status held root. This feature is not yet implemented so '-' is always returned. + discard_passdown|no_discard_passdown + Whether or not discards are actually being passed down to the + underlying device. When this is enabled when loading the table, + it can get disabled if the underlying device doesn't support it. + + ro|rw + If the pool encounters certain types of device failures it will + drop into a read-only metadata mode in which no changes to + the pool metadata (like allocating new blocks) are permitted. + + In serious cases where even a read-only mode is deemed unsafe + no further I/O will be permitted and the status will just + contain the string 'Fail'. The userspace recovery tools + should then be used. + iii) Messages create_thin <dev id> @@ -329,3 +347,7 @@ regain some space then send the 'trim' message to the pool. ii) Status <nr mapped sectors> <highest mapped sector> + + If the pool has encountered device errors and failed, the status + will just contain the string 'Fail'. The userspace recovery + tools should then be used. diff --git a/Documentation/devicetree/bindings/arm/calxeda/l2ecc.txt b/Documentation/devicetree/bindings/arm/calxeda/l2ecc.txt new file mode 100644 index 00000000000..94e642a33db --- /dev/null +++ b/Documentation/devicetree/bindings/arm/calxeda/l2ecc.txt @@ -0,0 +1,15 @@ +Calxeda Highbank L2 cache ECC + +Properties: +- compatible : Should be "calxeda,hb-sregs-l2-ecc" +- reg : Address and size for ECC error interrupt clear registers. +- interrupts : Should be single bit error interrupt, then double bit error + interrupt. + +Example: + + sregs@fff3c200 { + compatible = "calxeda,hb-sregs-l2-ecc"; + reg = <0xfff3c200 0x100>; + interrupts = <0 71 4 0 72 4>; + }; diff --git a/Documentation/devicetree/bindings/arm/calxeda/mem-ctrlr.txt b/Documentation/devicetree/bindings/arm/calxeda/mem-ctrlr.txt new file mode 100644 index 00000000000..f770ac0893d --- /dev/null +++ b/Documentation/devicetree/bindings/arm/calxeda/mem-ctrlr.txt @@ -0,0 +1,14 @@ +Calxeda DDR memory controller + +Properties: +- compatible : Should be "calxeda,hb-ddr-ctrl" +- reg : Address and size for DDR controller registers. +- interrupts : Interrupt for DDR controller. + +Example: + + memory-controller@fff00000 { + compatible = "calxeda,hb-ddr-ctrl"; + reg = <0xfff00000 0x1000>; + interrupts = <0 91 4>; + }; diff --git a/Documentation/devicetree/bindings/ata/cavium-compact-flash.txt b/Documentation/devicetree/bindings/ata/cavium-compact-flash.txt new file mode 100644 index 00000000000..93986a5a801 --- /dev/null +++ b/Documentation/devicetree/bindings/ata/cavium-compact-flash.txt @@ -0,0 +1,30 @@ +* Compact Flash + +The Cavium Compact Flash device is connected to the Octeon Boot Bus, +and is thus a child of the Boot Bus device. It can read and write +industry standard compact flash devices. + +Properties: +- compatible: "cavium,ebt3000-compact-flash"; + + Compatibility with many Cavium evaluation boards. + +- reg: The base address of the the CF chip select banks. Depending on + the device configuration, there may be one or two banks. + +- cavium,bus-width: The width of the connection to the CF devices. Valid + values are 8 and 16. + +- cavium,true-ide: Optional, if present the CF connection is in True IDE mode. + +- cavium,dma-engine-handle: Optional, a phandle for the DMA Engine connected + to this device. + +Example: + compact-flash@5,0 { + compatible = "cavium,ebt3000-compact-flash"; + reg = <5 0 0x10000>, <6 0 0x10000>; + cavium,bus-width = <16>; + cavium,true-ide; + cavium,dma-engine-handle = <&dma0>; + }; diff --git a/Documentation/devicetree/bindings/gpio/cavium-octeon-gpio.txt b/Documentation/devicetree/bindings/gpio/cavium-octeon-gpio.txt new file mode 100644 index 00000000000..9d6dcd3fe7f --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/cavium-octeon-gpio.txt @@ -0,0 +1,49 @@ +* General Purpose Input Output (GPIO) bus. + +Properties: +- compatible: "cavium,octeon-3860-gpio" + + Compatibility with all cn3XXX, cn5XXX and cn6XXX SOCs. + +- reg: The base address of the GPIO unit's register bank. + +- gpio-controller: This is a GPIO controller. + +- #gpio-cells: Must be <2>. The first cell is the GPIO pin. + +- interrupt-controller: The GPIO controller is also an interrupt + controller, many of its pins may be configured as an interrupt + source. + +- #interrupt-cells: Must be <2>. The first cell is the GPIO pin + connected to the interrupt source. The second cell is the interrupt + triggering protocol and may have one of four values: + 1 - edge triggered on the rising edge. + 2 - edge triggered on the falling edge + 4 - level triggered active high. + 8 - level triggered active low. + +- interrupts: Interrupt routing for each pin. + +Example: + + gpio-controller@1070000000800 { + #gpio-cells = <2>; + compatible = "cavium,octeon-3860-gpio"; + reg = <0x10700 0x00000800 0x0 0x100>; + gpio-controller; + /* Interrupts are specified by two parts: + * 1) GPIO pin number (0..15) + * 2) Triggering (1 - edge rising + * 2 - edge falling + * 4 - level active high + * 8 - level active low) + */ + interrupt-controller; + #interrupt-cells = <2>; + /* The GPIO pin connect to 16 consecutive CUI bits */ + interrupts = <0 16>, <0 17>, <0 18>, <0 19>, + <0 20>, <0 21>, <0 22>, <0 23>, + <0 24>, <0 25>, <0 26>, <0 27>, + <0 28>, <0 29>, <0 30>, <0 31>; + }; diff --git a/Documentation/devicetree/bindings/i2c/cavium-i2c.txt b/Documentation/devicetree/bindings/i2c/cavium-i2c.txt new file mode 100644 index 00000000000..dced82ebe31 --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/cavium-i2c.txt @@ -0,0 +1,34 @@ +* Two Wire Serial Interface (TWSI) / I2C + +- compatible: "cavium,octeon-3860-twsi" + + Compatibility with all cn3XXX, cn5XXX and cn6XXX SOCs. + +- reg: The base address of the TWSI/I2C bus controller register bank. + +- #address-cells: Must be <1>. + +- #size-cells: Must be <0>. I2C addresses have no size component. + +- interrupts: A single interrupt specifier. + +- clock-frequency: The I2C bus clock rate in Hz. + +Example: + twsi0: i2c@1180000001000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "cavium,octeon-3860-twsi"; + reg = <0x11800 0x00001000 0x0 0x200>; + interrupts = <0 45>; + clock-frequency = <100000>; + + rtc@68 { + compatible = "dallas,ds1337"; + reg = <0x68>; + }; + tmp@4c { + compatible = "ti,tmp421"; + reg = <0x4c>; + }; + }; diff --git a/Documentation/devicetree/bindings/gpio/gpio_i2c.txt b/Documentation/devicetree/bindings/i2c/gpio-i2c.txt index 4f8ec947c6b..4f8ec947c6b 100644 --- a/Documentation/devicetree/bindings/gpio/gpio_i2c.txt +++ b/Documentation/devicetree/bindings/i2c/gpio-i2c.txt diff --git a/Documentation/devicetree/bindings/i2c/i2c-mxs.txt b/Documentation/devicetree/bindings/i2c/i2c-mxs.txt index 1bfc02de1b0..30ac3a0557f 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-mxs.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-mxs.txt @@ -4,6 +4,8 @@ Required properties: - compatible: Should be "fsl,<chip>-i2c" - reg: Should contain registers location and length - interrupts: Should contain ERROR and DMA interrupts +- clock-frequency: Desired I2C bus clock frequency in Hz. + Only 100000Hz and 400000Hz modes are supported. Examples: @@ -13,4 +15,5 @@ i2c0: i2c@80058000 { compatible = "fsl,imx28-i2c"; reg = <0x80058000 2000>; interrupts = <111 68>; + clock-frequency = <100000>; }; diff --git a/Documentation/devicetree/bindings/i2c/i2c-ocores.txt b/Documentation/devicetree/bindings/i2c/i2c-ocores.txt new file mode 100644 index 00000000000..c15781f4dc8 --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/i2c-ocores.txt @@ -0,0 +1,33 @@ +Device tree configuration for i2c-ocores + +Required properties: +- compatible : "opencores,i2c-ocores" +- reg : bus address start and address range size of device +- interrupts : interrupt number +- clock-frequency : frequency of bus clock in Hz +- #address-cells : should be <1> +- #size-cells : should be <0> + +Optional properties: +- reg-shift : device register offsets are shifted by this value +- reg-io-width : io register width in bytes (1, 2 or 4) +- regstep : deprecated, use reg-shift above + +Example: + + i2c0: ocores@a0000000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "opencores,i2c-ocores"; + reg = <0xa0000000 0x8>; + interrupts = <10>; + clock-frequency = <20000000>; + + reg-shift = <0>; /* 8 bit registers */ + reg-io-width = <1>; /* 8 bit read/write */ + + dummy@60 { + compatible = "dummy"; + reg = <0x60>; + }; + }; diff --git a/Documentation/devicetree/bindings/i2c/mrvl-i2c.txt b/Documentation/devicetree/bindings/i2c/mrvl-i2c.txt index b891ee21835..0f7945019f6 100644 --- a/Documentation/devicetree/bindings/i2c/mrvl-i2c.txt +++ b/Documentation/devicetree/bindings/i2c/mrvl-i2c.txt @@ -1,4 +1,4 @@ -* I2C +* Marvell MMP I2C controller Required properties : @@ -32,3 +32,20 @@ Examples: interrupts = <58>; }; +* Marvell MV64XXX I2C controller + +Required properties : + + - reg : Offset and length of the register set for the device + - compatible : Should be "marvell,mv64xxx-i2c" + - interrupts : The interrupt number + - clock-frequency : Desired I2C bus clock frequency in Hz. + +Examples: + + i2c@11000 { + compatible = "marvell,mv64xxx-i2c"; + reg = <0x11000 0x20>; + interrupts = <29>; + clock-frequency = <100000>; + }; diff --git a/Documentation/devicetree/bindings/mfd/ab8500.txt b/Documentation/devicetree/bindings/mfd/ab8500.txt new file mode 100644 index 00000000000..69e757a657a --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/ab8500.txt @@ -0,0 +1,123 @@ +* AB8500 Multi-Functional Device (MFD) + +Required parent device properties: +- compatible : contains "stericsson,ab8500"; +- interrupts : contains the IRQ line for the AB8500 +- interrupt-controller : describes the AB8500 as an Interrupt Controller (has its own domain) +- #interrupt-cells : should be 2, for 2-cell format + - The first cell is the AB8500 local IRQ number + - The second cell is used to specify optional parameters + - bits[3:0] trigger type and level flags: + 1 = low-to-high edge triggered + 2 = high-to-low edge triggered + 4 = active high level-sensitive + 8 = active low level-sensitive + +Optional parent device properties: +- reg : contains the PRCMU mailbox address for the AB8500 i2c port + +The AB8500 consists of a large and varied group of sub-devices: + +Device IRQ Names Supply Names Description +------ --------- ------------ ----------- +ab8500-bm : : : Battery Manager +ab8500-btemp : : : Battery Temperature +ab8500-charger : : : Battery Charger +ab8500-fg : : : Fuel Gauge +ab8500-gpadc : HW_CONV_END : vddadc : Analogue to Digital Converter + SW_CONV_END : : +ab8500-gpio : : : GPIO Controller +ab8500-ponkey : ONKEY_DBF : : Power-on Key + ONKEY_DBR : : +ab8500-pwm : : : Pulse Width Modulator +ab8500-regulator : : : Regulators +ab8500-rtc : 60S : : Real Time Clock + : ALARM : : +ab8500-sysctrl : : : System Control +ab8500-usb : ID_WAKEUP_R : vddulpivio18 : Universal Serial Bus + : ID_WAKEUP_F : v-ape : + : VBUS_DET_F : musb_1v8 : + : VBUS_DET_R : : + : USB_LINK_STATUS : : + : USB_ADP_PROBE_PLUG : : + : USB_ADP_PROBE_UNPLUG : : + +Required child device properties: +- compatible : "stericsson,ab8500-[bm|btemp|charger|fg|gpadc|gpio|ponkey| + pwm|regulator|rtc|sysctrl|usb]"; + +Optional child device properties: +- interrupts : contains the device IRQ(s) using the 2-cell format (see above) +- interrupt-names : contains names of IRQ resource in the order in which they were + supplied in the interrupts property +- <supply_name>-supply : contains a phandle to the regulator supply node in Device Tree + +ab8500@5 { + compatible = "stericsson,ab8500"; + reg = <5>; /* mailbox 5 is i2c */ + interrupts = <0 40 0x4>; + interrupt-controller; + #interrupt-cells = <2>; + + ab8500-rtc { + compatible = "stericsson,ab8500-rtc"; + interrupts = <17 0x4 + 18 0x4>; + interrupt-names = "60S", "ALARM"; + }; + + ab8500-gpadc { + compatible = "stericsson,ab8500-gpadc"; + interrupts = <32 0x4 + 39 0x4>; + interrupt-names = "HW_CONV_END", "SW_CONV_END"; + vddadc-supply = <&ab8500_ldo_tvout_reg>; + }; + + ab8500-usb { + compatible = "stericsson,ab8500-usb"; + interrupts = < 90 0x4 + 96 0x4 + 14 0x4 + 15 0x4 + 79 0x4 + 74 0x4 + 75 0x4>; + interrupt-names = "ID_WAKEUP_R", + "ID_WAKEUP_F", + "VBUS_DET_F", + "VBUS_DET_R", + "USB_LINK_STATUS", + "USB_ADP_PROBE_PLUG", + "USB_ADP_PROBE_UNPLUG"; + vddulpivio18-supply = <&ab8500_ldo_initcore_reg>; + v-ape-supply = <&db8500_vape_reg>; + musb_1v8-supply = <&db8500_vsmps2_reg>; + }; + + ab8500-ponkey { + compatible = "stericsson,ab8500-ponkey"; + interrupts = <6 0x4 + 7 0x4>; + interrupt-names = "ONKEY_DBF", "ONKEY_DBR"; + }; + + ab8500-sysctrl { + compatible = "stericsson,ab8500-sysctrl"; + }; + + ab8500-pwm { + compatible = "stericsson,ab8500-pwm"; + }; + + ab8500-regulators { + compatible = "stericsson,ab8500-regulator"; + + ab8500_ldo_aux1_reg: ab8500_ldo_aux1 { + /* + * See: Documentation/devicetree/bindings/regulator/regulator.txt + * for more information on regulators + */ + }; + }; +}; diff --git a/Documentation/devicetree/bindings/mfd/max77686.txt b/Documentation/devicetree/bindings/mfd/max77686.txt new file mode 100644 index 00000000000..c6a3469d343 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/max77686.txt @@ -0,0 +1,59 @@ +Maxim MAX77686 multi-function device + +MAX77686 is a Mulitifunction device with PMIC, RTC and Charger on chip. It is +interfaced to host controller using i2c interface. PMIC and Charger submodules +are addressed using same i2c slave address whereas RTC submodule uses +different i2c slave address,presently for which we are statically creating i2c +client while probing.This document describes the binding for mfd device and +PMIC submodule. + +Required properties: +- compatible : Must be "maxim,max77686"; +- reg : Specifies the i2c slave address of PMIC block. +- interrupts : This i2c device has an IRQ line connected to the main SoC. +- interrupt-parent : The parent interrupt controller. + +Optional node: +- voltage-regulators : The regulators of max77686 have to be instantiated + under subnode named "voltage-regulators" using the following format. + + regulator_name { + regulator-compatible = LDOn/BUCKn + standard regulator constraints.... + }; + refer Documentation/devicetree/bindings/regulator/regulator.txt + + The regulator-compatible property of regulator should initialized with string +to get matched with their hardware counterparts as follow: + + -LDOn : for LDOs, where n can lie in range 1 to 26. + example: LDO1, LDO2, LDO26. + -BUCKn : for BUCKs, where n can lie in range 1 to 9. + example: BUCK1, BUCK5, BUCK9. + +Example: + + max77686@09 { + compatible = "maxim,max77686"; + interrupt-parent = <&wakeup_eint>; + interrupts = <26 0>; + reg = <0x09>; + + voltage-regulators { + ldo11_reg { + regulator-compatible = "LDO11"; + regulator-name = "vdd_ldo11"; + regulator-min-microvolt = <1900000>; + regulator-max-microvolt = <1900000>; + regulator-always-on; + }; + + buck1_reg { + regulator-compatible = "BUCK1"; + regulator-name = "vdd_mif"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-boot-on; + }; + } diff --git a/Documentation/devicetree/bindings/mfd/tps65910.txt b/Documentation/devicetree/bindings/mfd/tps65910.txt index d2802d4717b..db03599ae4d 100644 --- a/Documentation/devicetree/bindings/mfd/tps65910.txt +++ b/Documentation/devicetree/bindings/mfd/tps65910.txt @@ -81,7 +81,7 @@ Example: ti,vmbch-threshold = 0; ti,vmbch2-threshold = 0; - + ti,en-ck32k-xtal; ti,en-gpio-sleep = <0 0 1 0 0 0 0 0 0>; vcc1-supply = <®_parent>; diff --git a/Documentation/devicetree/bindings/mfd/twl6040.txt b/Documentation/devicetree/bindings/mfd/twl6040.txt index bc67c6f424a..c855240f3a0 100644 --- a/Documentation/devicetree/bindings/mfd/twl6040.txt +++ b/Documentation/devicetree/bindings/mfd/twl6040.txt @@ -6,7 +6,7 @@ They are connected ot the host processor via i2c for commands, McPDM for audio data and commands. Required properties: -- compatible : Must be "ti,twl6040"; +- compatible : "ti,twl6040" for twl6040, "ti,twl6041" for twl6041 - reg: must be 0x4b for i2c address - interrupts: twl6040 has one interrupt line connecteded to the main SoC - interrupt-parent: The parent interrupt controller diff --git a/Documentation/devicetree/bindings/mips/cavium/bootbus.txt b/Documentation/devicetree/bindings/mips/cavium/bootbus.txt new file mode 100644 index 00000000000..6581478225a --- /dev/null +++ b/Documentation/devicetree/bindings/mips/cavium/bootbus.txt @@ -0,0 +1,126 @@ +* Boot Bus + +The Octeon Boot Bus is a configurable parallel bus with 8 chip +selects. Each chip select is independently configurable. + +Properties: +- compatible: "cavium,octeon-3860-bootbus" + + Compatibility with all cn3XXX, cn5XXX and cn6XXX SOCs. + +- reg: The base address of the Boot Bus' register bank. + +- #address-cells: Must be <2>. The first cell is the chip select + within the bootbus. The second cell is the offset from the chip select. + +- #size-cells: Must be <1>. + +- ranges: There must be one one triplet of (child-bus-address, + parent-bus-address, length) for each active chip select. If the + length element for any triplet is zero, the chip select is disabled, + making it inactive. + +The configuration parameters for each chip select are stored in child +nodes. + +Configuration Properties: +- compatible: "cavium,octeon-3860-bootbus-config" + +- cavium,cs-index: A single cell indicating the chip select that + corresponds to this configuration. + +- cavium,t-adr: A cell specifying the ADR timing (in nS). + +- cavium,t-ce: A cell specifying the CE timing (in nS). + +- cavium,t-oe: A cell specifying the OE timing (in nS). + +- cavium,t-we: A cell specifying the WE timing (in nS). + +- cavium,t-rd-hld: A cell specifying the RD_HLD timing (in nS). + +- cavium,t-wr-hld: A cell specifying the WR_HLD timing (in nS). + +- cavium,t-pause: A cell specifying the PAUSE timing (in nS). + +- cavium,t-wait: A cell specifying the WAIT timing (in nS). + +- cavium,t-page: A cell specifying the PAGE timing (in nS). + +- cavium,t-rd-dly: A cell specifying the RD_DLY timing (in nS). + +- cavium,pages: A cell specifying the PAGES parameter (0 = 8 bytes, 1 + = 2 bytes, 2 = 4 bytes, 3 = 8 bytes). + +- cavium,wait-mode: Optional. If present, wait mode (WAITM) is selected. + +- cavium,page-mode: Optional. If present, page mode (PAGEM) is selected. + +- cavium,bus-width: A cell specifying the WIDTH parameter (in bits) of + the bus for this chip select. + +- cavium,ale-mode: Optional. If present, ALE mode is selected. + +- cavium,sam-mode: Optional. If present, SAM mode is selected. + +- cavium,or-mode: Optional. If present, OR mode is selected. + +Example: + bootbus: bootbus@1180000000000 { + compatible = "cavium,octeon-3860-bootbus"; + reg = <0x11800 0x00000000 0x0 0x200>; + /* The chip select number and offset */ + #address-cells = <2>; + /* The size of the chip select region */ + #size-cells = <1>; + ranges = <0 0 0x0 0x1f400000 0xc00000>, + <1 0 0x10000 0x30000000 0>, + <2 0 0x10000 0x40000000 0>, + <3 0 0x10000 0x50000000 0>, + <4 0 0x0 0x1d020000 0x10000>, + <5 0 0x0 0x1d040000 0x10000>, + <6 0 0x0 0x1d050000 0x10000>, + <7 0 0x10000 0x90000000 0>; + + cavium,cs-config@0 { + compatible = "cavium,octeon-3860-bootbus-config"; + cavium,cs-index = <0>; + cavium,t-adr = <20>; + cavium,t-ce = <60>; + cavium,t-oe = <60>; + cavium,t-we = <45>; + cavium,t-rd-hld = <35>; + cavium,t-wr-hld = <45>; + cavium,t-pause = <0>; + cavium,t-wait = <0>; + cavium,t-page = <35>; + cavium,t-rd-dly = <0>; + + cavium,pages = <0>; + cavium,bus-width = <8>; + }; + . + . + . + cavium,cs-config@6 { + compatible = "cavium,octeon-3860-bootbus-config"; + cavium,cs-index = <6>; + cavium,t-adr = <5>; + cavium,t-ce = <300>; + cavium,t-oe = <270>; + cavium,t-we = <150>; + cavium,t-rd-hld = <100>; + cavium,t-wr-hld = <70>; + cavium,t-pause = <0>; + cavium,t-wait = <0>; + cavium,t-page = <320>; + cavium,t-rd-dly = <0>; + + cavium,pages = <0>; + cavium,wait-mode; + cavium,bus-width = <16>; + }; + . + . + . + }; diff --git a/Documentation/devicetree/bindings/mips/cavium/ciu.txt b/Documentation/devicetree/bindings/mips/cavium/ciu.txt new file mode 100644 index 00000000000..2c2d0746b43 --- /dev/null +++ b/Documentation/devicetree/bindings/mips/cavium/ciu.txt @@ -0,0 +1,26 @@ +* Central Interrupt Unit + +Properties: +- compatible: "cavium,octeon-3860-ciu" + + Compatibility with all cn3XXX, cn5XXX and cn63XX SOCs. + +- interrupt-controller: This is an interrupt controller. + +- reg: The base address of the CIU's register bank. + +- #interrupt-cells: Must be <2>. The first cell is the bank within + the CIU and may have a value of 0 or 1. The second cell is the bit + within the bank and may have a value between 0 and 63. + +Example: + interrupt-controller@1070000000000 { + compatible = "cavium,octeon-3860-ciu"; + interrupt-controller; + /* Interrupts are specified by two parts: + * 1) Controller register (0 or 1) + * 2) Bit within the register (0..63) + */ + #interrupt-cells = <2>; + reg = <0x10700 0x00000000 0x0 0x7000>; + }; diff --git a/Documentation/devicetree/bindings/mips/cavium/ciu2.txt b/Documentation/devicetree/bindings/mips/cavium/ciu2.txt new file mode 100644 index 00000000000..0ec7ba8bbbc --- /dev/null +++ b/Documentation/devicetree/bindings/mips/cavium/ciu2.txt @@ -0,0 +1,27 @@ +* Central Interrupt Unit + +Properties: +- compatible: "cavium,octeon-6880-ciu2" + + Compatibility with 68XX SOCs. + +- interrupt-controller: This is an interrupt controller. + +- reg: The base address of the CIU's register bank. + +- #interrupt-cells: Must be <2>. The first cell is the bank within + the CIU and may have a value between 0 and 63. The second cell is + the bit within the bank and may also have a value between 0 and 63. + +Example: + interrupt-controller@1070100000000 { + compatible = "cavium,octeon-6880-ciu2"; + interrupt-controller; + /* Interrupts are specified by two parts: + * 1) Controller register (0..63) + * 2) Bit within the register (0..63) + */ + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x10701 0x00000000 0x0 0x4000000>; + }; diff --git a/Documentation/devicetree/bindings/mips/cavium/dma-engine.txt b/Documentation/devicetree/bindings/mips/cavium/dma-engine.txt new file mode 100644 index 00000000000..cb4291e3b1d --- /dev/null +++ b/Documentation/devicetree/bindings/mips/cavium/dma-engine.txt @@ -0,0 +1,21 @@ +* DMA Engine. + +The Octeon DMA Engine transfers between the Boot Bus and main memory. +The DMA Engine will be refered to by phandle by any device that is +connected to it. + +Properties: +- compatible: "cavium,octeon-5750-bootbus-dma" + + Compatibility with all cn52XX, cn56XX and cn6XXX SOCs. + +- reg: The base address of the DMA Engine's register bank. + +- interrupts: A single interrupt specifier. + +Example: + dma0: dma-engine@1180000000100 { + compatible = "cavium,octeon-5750-bootbus-dma"; + reg = <0x11800 0x00000100 0x0 0x8>; + interrupts = <0 63>; + }; diff --git a/Documentation/devicetree/bindings/mips/cavium/uctl.txt b/Documentation/devicetree/bindings/mips/cavium/uctl.txt new file mode 100644 index 00000000000..aa66b9b8d80 --- /dev/null +++ b/Documentation/devicetree/bindings/mips/cavium/uctl.txt @@ -0,0 +1,46 @@ +* UCTL USB controller glue + +Properties: +- compatible: "cavium,octeon-6335-uctl" + + Compatibility with all cn6XXX SOCs. + +- reg: The base address of the UCTL register bank. + +- #address-cells: Must be <2>. + +- #size-cells: Must be <2>. + +- ranges: Empty to signify direct mapping of the children. + +- refclk-frequency: A single cell containing the reference clock + frequency in Hz. + +- refclk-type: A string describing the reference clock connection + either "crystal" or "external". + +Example: + uctl@118006f000000 { + compatible = "cavium,octeon-6335-uctl"; + reg = <0x11800 0x6f000000 0x0 0x100>; + ranges; /* Direct mapping */ + #address-cells = <2>; + #size-cells = <2>; + /* 12MHz, 24MHz and 48MHz allowed */ + refclk-frequency = <24000000>; + /* Either "crystal" or "external" */ + refclk-type = "crystal"; + + ehci@16f0000000000 { + compatible = "cavium,octeon-6335-ehci","usb-ehci"; + reg = <0x16f00 0x00000000 0x0 0x100>; + interrupts = <0 56>; + big-endian-regs; + }; + ohci@16f0000000400 { + compatible = "cavium,octeon-6335-ohci","usb-ohci"; + reg = <0x16f00 0x00000400 0x0 0x100>; + interrupts = <0 56>; + big-endian-regs; + }; + }; diff --git a/Documentation/devicetree/bindings/net/cavium-mdio.txt b/Documentation/devicetree/bindings/net/cavium-mdio.txt new file mode 100644 index 00000000000..04cb7491d23 --- /dev/null +++ b/Documentation/devicetree/bindings/net/cavium-mdio.txt @@ -0,0 +1,27 @@ +* System Management Interface (SMI) / MDIO + +Properties: +- compatible: "cavium,octeon-3860-mdio" + + Compatibility with all cn3XXX, cn5XXX and cn6XXX SOCs. + +- reg: The base address of the MDIO bus controller register bank. + +- #address-cells: Must be <1>. + +- #size-cells: Must be <0>. MDIO addresses have no size component. + +Typically an MDIO bus might have several children. + +Example: + mdio@1180000001800 { + compatible = "cavium,octeon-3860-mdio"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x11800 0x00001800 0x0 0x40>; + + ethernet-phy@0 { + ... + reg = <0>; + }; + }; diff --git a/Documentation/devicetree/bindings/net/cavium-mix.txt b/Documentation/devicetree/bindings/net/cavium-mix.txt new file mode 100644 index 00000000000..5da628db68b --- /dev/null +++ b/Documentation/devicetree/bindings/net/cavium-mix.txt @@ -0,0 +1,39 @@ +* MIX Ethernet controller. + +Properties: +- compatible: "cavium,octeon-5750-mix" + + Compatibility with all cn5XXX and cn6XXX SOCs populated with MIX + devices. + +- reg: The base addresses of four separate register banks. The first + bank contains the MIX registers. The second bank the corresponding + AGL registers. The third bank are the AGL registers shared by all + MIX devices present. The fourth bank is the AGL_PRT_CTL shared by + all MIX devices present. + +- cell-index: A single cell specifying which portion of the shared + register banks corresponds to this MIX device. + +- interrupts: Two interrupt specifiers. The first is the MIX + interrupt routing and the second the routing for the AGL interrupts. + +- mac-address: Optional, the MAC address to assign to the device. + +- local-mac-address: Optional, the MAC address to assign to the device + if mac-address is not specified. + +- phy-handle: Optional, a phandle for the PHY device connected to this device. + +Example: + ethernet@1070000100800 { + compatible = "cavium,octeon-5750-mix"; + reg = <0x10700 0x00100800 0x0 0x100>, /* MIX */ + <0x11800 0xE0000800 0x0 0x300>, /* AGL */ + <0x11800 0xE0000400 0x0 0x400>, /* AGL_SHARED */ + <0x11800 0xE0002008 0x0 0x8>; /* AGL_PRT_CTL */ + cell-index = <1>; + interrupts = <1 18>, < 1 46>; + local-mac-address = [ 00 0f b7 10 63 54 ]; + phy-handle = <&phy1>; + }; diff --git a/Documentation/devicetree/bindings/net/cavium-pip.txt b/Documentation/devicetree/bindings/net/cavium-pip.txt new file mode 100644 index 00000000000..d4c53ba04b3 --- /dev/null +++ b/Documentation/devicetree/bindings/net/cavium-pip.txt @@ -0,0 +1,98 @@ +* PIP Ethernet nexus. + +The PIP Ethernet nexus can control several data packet input/output +devices. The devices have a two level grouping scheme. There may be +several interfaces, and each interface may have several ports. These +ports might be an individual Ethernet PHY. + + +Properties for the PIP nexus: +- compatible: "cavium,octeon-3860-pip" + + Compatibility with all cn3XXX, cn5XXX and cn6XXX SOCs. + +- reg: The base address of the PIP's register bank. + +- #address-cells: Must be <1>. + +- #size-cells: Must be <0>. + +Properties for PIP interfaces which is a child the PIP nexus: +- compatible: "cavium,octeon-3860-pip-interface" + + Compatibility with all cn3XXX, cn5XXX and cn6XXX SOCs. + +- reg: The interface number. + +- #address-cells: Must be <1>. + +- #size-cells: Must be <0>. + +Properties for PIP port which is a child the PIP interface: +- compatible: "cavium,octeon-3860-pip-port" + + Compatibility with all cn3XXX, cn5XXX and cn6XXX SOCs. + +- reg: The port number within the interface group. + +- mac-address: Optional, the MAC address to assign to the device. + +- local-mac-address: Optional, the MAC address to assign to the device + if mac-address is not specified. + +- phy-handle: Optional, a phandle for the PHY device connected to this device. + +Example: + + pip@11800a0000000 { + compatible = "cavium,octeon-3860-pip"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x11800 0xa0000000 0x0 0x2000>; + + interface@0 { + compatible = "cavium,octeon-3860-pip-interface"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; /* interface */ + + ethernet@0 { + compatible = "cavium,octeon-3860-pip-port"; + reg = <0x0>; /* Port */ + local-mac-address = [ 00 0f b7 10 63 60 ]; + phy-handle = <&phy2>; + }; + ethernet@1 { + compatible = "cavium,octeon-3860-pip-port"; + reg = <0x1>; /* Port */ + local-mac-address = [ 00 0f b7 10 63 61 ]; + phy-handle = <&phy3>; + }; + ethernet@2 { + compatible = "cavium,octeon-3860-pip-port"; + reg = <0x2>; /* Port */ + local-mac-address = [ 00 0f b7 10 63 62 ]; + phy-handle = <&phy4>; + }; + ethernet@3 { + compatible = "cavium,octeon-3860-pip-port"; + reg = <0x3>; /* Port */ + local-mac-address = [ 00 0f b7 10 63 63 ]; + phy-handle = <&phy5>; + }; + }; + + interface@1 { + compatible = "cavium,octeon-3860-pip-interface"; + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; /* interface */ + + ethernet@0 { + compatible = "cavium,octeon-3860-pip-port"; + reg = <0x0>; /* Port */ + local-mac-address = [ 00 0f b7 10 63 64 ]; + phy-handle = <&phy6>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/pwm/lpc32xx-pwm.txt b/Documentation/devicetree/bindings/pwm/lpc32xx-pwm.txt new file mode 100644 index 00000000000..cfe1db3bb6e --- /dev/null +++ b/Documentation/devicetree/bindings/pwm/lpc32xx-pwm.txt @@ -0,0 +1,12 @@ +LPC32XX PWM controller + +Required properties: +- compatible: should be "nxp,lpc3220-pwm" +- reg: physical base address and length of the controller's registers + +Examples: + +pwm@0x4005C000 { + compatible = "nxp,lpc3220-pwm"; + reg = <0x4005C000 0x8>; +}; diff --git a/Documentation/devicetree/bindings/pwm/mxs-pwm.txt b/Documentation/devicetree/bindings/pwm/mxs-pwm.txt new file mode 100644 index 00000000000..b16f4a57d11 --- /dev/null +++ b/Documentation/devicetree/bindings/pwm/mxs-pwm.txt @@ -0,0 +1,17 @@ +Freescale MXS PWM controller + +Required properties: +- compatible: should be "fsl,imx23-pwm" +- reg: physical base address and length of the controller's registers +- #pwm-cells: should be 2. The first cell specifies the per-chip index + of the PWM to use and the second cell is the duty cycle in nanoseconds. +- fsl,pwm-number: the number of PWM devices + +Example: + +pwm: pwm@80064000 { + compatible = "fsl,imx28-pwm", "fsl,imx23-pwm"; + reg = <0x80064000 2000>; + #pwm-cells = <2>; + fsl,pwm-number = <8>; +}; diff --git a/Documentation/devicetree/bindings/pwm/nvidia,tegra20-pwm.txt b/Documentation/devicetree/bindings/pwm/nvidia,tegra20-pwm.txt new file mode 100644 index 00000000000..bbbeedb4ec0 --- /dev/null +++ b/Documentation/devicetree/bindings/pwm/nvidia,tegra20-pwm.txt @@ -0,0 +1,18 @@ +Tegra SoC PWFM controller + +Required properties: +- compatible: should be one of: + - "nvidia,tegra20-pwm" + - "nvidia,tegra30-pwm" +- reg: physical base address and length of the controller's registers +- #pwm-cells: On Tegra the number of cells used to specify a PWM is 2. The + first cell specifies the per-chip index of the PWM to use and the second + cell is the duty cycle in nanoseconds. + +Example: + + pwm: pwm@7000a000 { + compatible = "nvidia,tegra20-pwm"; + reg = <0x7000a000 0x100>; + #pwm-cells = <2>; + }; diff --git a/Documentation/devicetree/bindings/pwm/pwm.txt b/Documentation/devicetree/bindings/pwm/pwm.txt new file mode 100644 index 00000000000..73ec962bfe8 --- /dev/null +++ b/Documentation/devicetree/bindings/pwm/pwm.txt @@ -0,0 +1,57 @@ +Specifying PWM information for devices +====================================== + +1) PWM user nodes +----------------- + +PWM users should specify a list of PWM devices that they want to use +with a property containing a 'pwm-list': + + pwm-list ::= <single-pwm> [pwm-list] + single-pwm ::= <pwm-phandle> <pwm-specifier> + pwm-phandle : phandle to PWM controller node + pwm-specifier : array of #pwm-cells specifying the given PWM + (controller specific) + +PWM properties should be named "pwms". The exact meaning of each pwms +property must be documented in the device tree binding for each device. +An optional property "pwm-names" may contain a list of strings to label +each of the PWM devices listed in the "pwms" property. If no "pwm-names" +property is given, the name of the user node will be used as fallback. + +Drivers for devices that use more than a single PWM device can use the +"pwm-names" property to map the name of the PWM device requested by the +pwm_get() call to an index into the list given by the "pwms" property. + +The following example could be used to describe a PWM-based backlight +device: + + pwm: pwm { + #pwm-cells = <2>; + }; + + [...] + + bl: backlight { + pwms = <&pwm 0 5000000>; + pwm-names = "backlight"; + }; + +pwm-specifier typically encodes the chip-relative PWM number and the PWM +period in nanoseconds. Note that in the example above, specifying the +"pwm-names" is redundant because the name "backlight" would be used as +fallback anyway. + +2) PWM controller nodes +----------------------- + +PWM controller nodes must specify the number of cells used for the +specifier using the '#pwm-cells' property. + +An example PWM controller might look like this: + + pwm: pwm@7000a000 { + compatible = "nvidia,tegra20-pwm"; + reg = <0x7000a000 0x100>; + #pwm-cells = <2>; + }; diff --git a/Documentation/devicetree/bindings/serial/cavium-uart.txt b/Documentation/devicetree/bindings/serial/cavium-uart.txt new file mode 100644 index 00000000000..87a6c375cd4 --- /dev/null +++ b/Documentation/devicetree/bindings/serial/cavium-uart.txt @@ -0,0 +1,19 @@ +* Universal Asynchronous Receiver/Transmitter (UART) + +- compatible: "cavium,octeon-3860-uart" + + Compatibility with all cn3XXX, cn5XXX and cn6XXX SOCs. + +- reg: The base address of the UART register bank. + +- interrupts: A single interrupt specifier. + +- current-speed: Optional, the current bit rate in bits per second. + +Example: + uart1: serial@1180000000c00 { + compatible = "cavium,octeon-3860-uart","ns16550"; + reg = <0x11800 0x00000c00 0x0 0x400>; + current-speed = <115200>; + interrupts = <0 35>; + }; diff --git a/Documentation/devicetree/bindings/video/backlight/pwm-backlight.txt b/Documentation/devicetree/bindings/video/backlight/pwm-backlight.txt new file mode 100644 index 00000000000..1e4fc727f3b --- /dev/null +++ b/Documentation/devicetree/bindings/video/backlight/pwm-backlight.txt @@ -0,0 +1,28 @@ +pwm-backlight bindings + +Required properties: + - compatible: "pwm-backlight" + - pwms: OF device-tree PWM specification (see PWM binding[0]) + - brightness-levels: Array of distinct brightness levels. Typically these + are in the range from 0 to 255, but any range starting at 0 will do. + The actual brightness level (PWM duty cycle) will be interpolated + from these values. 0 means a 0% duty cycle (darkest/off), while the + last value in the array represents a 100% duty cycle (brightest). + - default-brightness-level: the default brightness level (index into the + array defined by the "brightness-levels" property) + +Optional properties: + - pwm-names: a list of names for the PWM devices specified in the + "pwms" property (see PWM binding[0]) + +[0]: Documentation/devicetree/bindings/pwm/pwm.txt + +Example: + + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm 0 5000000>; + + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + }; diff --git a/Documentation/dontdiff b/Documentation/dontdiff index b4a898f43c3..39462cf35cd 100644 --- a/Documentation/dontdiff +++ b/Documentation/dontdiff @@ -150,7 +150,6 @@ keywords.c ksym.c* ksym.h* kxgettext -lkc_defs.h lex.c lex.*.c linux diff --git a/Documentation/dvb/get_dvb_firmware b/Documentation/dvb/get_dvb_firmware index fbb24117448..12d3952e83d 100755 --- a/Documentation/dvb/get_dvb_firmware +++ b/Documentation/dvb/get_dvb_firmware @@ -29,7 +29,7 @@ use IO::Handle; "af9015", "ngene", "az6027", "lme2510_lg", "lme2510c_s7395", "lme2510c_s7395_old", "drxk", "drxk_terratec_h5", "drxk_hauppauge_hvr930c", "tda10071", "it9135", "it9137", - "drxk_pctv"); + "drxk_pctv", "drxk_terratec_htc_stick", "sms1xxx_hcw"); # Check args syntax() if (scalar(@ARGV) != 1); @@ -676,6 +676,24 @@ sub drxk_terratec_h5 { "$fwfile" } +sub drxk_terratec_htc_stick { + my $url = "http://ftp.terratec.de/Receiver/Cinergy_HTC_Stick/Updates/"; + my $zipfile = "Cinergy_HTC_Stick_Drv_5.09.1202.00_XP_Vista_7.exe"; + my $hash = "6722a2442a05423b781721fbc069ed5e"; + my $tmpdir = tempdir(DIR => "/tmp", CLEANUP => 0); + my $drvfile = "Cinergy HTC Stick/BDA Driver 5.09.1202.00/Windows 32 Bit/emOEM.sys"; + my $fwfile = "dvb-usb-terratec-htc-stick-drxk.fw"; + + checkstandard(); + + wgetfile($zipfile, $url . $zipfile); + verify($zipfile, $hash); + unzip($zipfile, $tmpdir); + extract("$tmpdir/$drvfile", 0x4e5c0, 42692, "$fwfile"); + + "$fwfile" +} + sub it9135 { my $sourcefile = "dvb-usb-it9135.zip"; my $url = "http://www.ite.com.tw/uploads/firmware/v3.6.0.0/$sourcefile"; @@ -748,6 +766,28 @@ sub drxk_pctv { "$fwfile"; } +sub sms1xxx_hcw { + my $url = "http://steventoth.net/linux/sms1xxx/"; + my %files = ( + 'sms1xxx-hcw-55xxx-dvbt-01.fw' => "afb6f9fb9a71d64392e8564ef9577e5a", + 'sms1xxx-hcw-55xxx-dvbt-02.fw' => "b44807098ba26e52cbedeadc052ba58f", + 'sms1xxx-hcw-55xxx-isdbt-02.fw' => "dae934eeea85225acbd63ce6cfe1c9e4", + ); + + checkstandard(); + + my $allfiles; + foreach my $fwfile (keys %files) { + wgetfile($fwfile, "$url/$fwfile"); + verify($fwfile, $files{$fwfile}); + $allfiles .= " $fwfile"; + } + + $allfiles =~ s/^\s//; + + $allfiles; +} + # --------------------------------------------------------------- # Utilities diff --git a/Documentation/edac.txt b/Documentation/edac.txt index 03df2b02033..56c7e936430 100644 --- a/Documentation/edac.txt +++ b/Documentation/edac.txt @@ -232,116 +232,20 @@ EDAC control and attribute files. In 'mcX' directories are EDAC control and attribute files for -this 'X' instance of the memory controllers: - - -Counter reset control file: - - 'reset_counters' - - This write-only control file will zero all the statistical counters - for UE and CE errors. Zeroing the counters will also reset the timer - indicating how long since the last counter zero. This is useful - for computing errors/time. Since the counters are always reset at - driver initialization time, no module/kernel parameter is available. - - RUN TIME: echo "anything" >/sys/devices/system/edac/mc/mc0/counter_reset - - This resets the counters on memory controller 0 - - -Seconds since last counter reset control file: - - 'seconds_since_reset' - - This attribute file displays how many seconds have elapsed since the - last counter reset. This can be used with the error counters to - measure error rates. - - - -Memory Controller name attribute file: - - 'mc_name' - - This attribute file displays the type of memory controller - that is being utilized. - - -Total memory managed by this memory controller attribute file: - - 'size_mb' - - This attribute file displays, in count of megabytes, of memory - that this instance of memory controller manages. - - -Total Uncorrectable Errors count attribute file: - - 'ue_count' - - This attribute file displays the total count of uncorrectable - errors that have occurred on this memory controller. If panic_on_ue - is set this counter will not have a chance to increment, - since EDAC will panic the system. - - -Total UE count that had no information attribute fileY: - - 'ue_noinfo_count' - - This attribute file displays the number of UEs that have occurred - with no information as to which DIMM slot is having errors. - - -Total Correctable Errors count attribute file: - - 'ce_count' - - This attribute file displays the total count of correctable - errors that have occurred on this memory controller. This - count is very important to examine. CEs provide early - indications that a DIMM is beginning to fail. This count - field should be monitored for non-zero values and report - such information to the system administrator. - - -Total Correctable Errors count attribute file: - - 'ce_noinfo_count' - - This attribute file displays the number of CEs that - have occurred wherewith no information as to which DIMM slot - is having errors. Memory is handicapped, but operational, - yet no information is available to indicate which slot - the failing memory is in. This count field should be also - be monitored for non-zero values. - -Device Symlink: - - 'device' - - Symlink to the memory controller device. - -Sdram memory scrubbing rate: - - 'sdram_scrub_rate' - - Read/Write attribute file that controls memory scrubbing. The scrubbing - rate is set by writing a minimum bandwidth in bytes/sec to the attribute - file. The rate will be translated to an internal value that gives at - least the specified rate. - - Reading the file will return the actual scrubbing rate employed. - - If configuration fails or memory scrubbing is not implemented, accessing - that attribute will fail. +this 'X' instance of the memory controllers. +For a description of the sysfs API, please see: + Documentation/ABI/testing/sysfs/devices-edac ============================================================================ 'csrowX' DIRECTORIES +When CONFIG_EDAC_LEGACY_SYSFS is enabled, the sysfs will contain the +csrowX directories. As this API doesn't work properly for Rambus, FB-DIMMs +and modern Intel Memory Controllers, this is being deprecated in favor +of dimmX directories. + In the 'csrowX' directories are EDAC control and attribute files for this 'X' instance of csrow: diff --git a/Documentation/fault-injection/fault-injection.txt b/Documentation/fault-injection/fault-injection.txt index ba4be8b7709..4cf1a2a6bd7 100644 --- a/Documentation/fault-injection/fault-injection.txt +++ b/Documentation/fault-injection/fault-injection.txt @@ -240,3 +240,30 @@ trap "echo 0 > /sys/kernel/debug/$FAILTYPE/probability" SIGINT SIGTERM EXIT echo "Injecting errors into the module $module... (interrupt to stop)" sleep 1000000 +Tool to run command with failslab or fail_page_alloc +---------------------------------------------------- +In order to make it easier to accomplish the tasks mentioned above, we can use +tools/testing/fault-injection/failcmd.sh. Please run a command +"./tools/testing/fault-injection/failcmd.sh --help" for more information and +see the following examples. + +Examples: + +Run a command "make -C tools/testing/selftests/ run_tests" with injecting slab +allocation failure. + + # ./tools/testing/fault-injection/failcmd.sh \ + -- make -C tools/testing/selftests/ run_tests + +Same as above except to specify 100 times failures at most instead of one time +at most by default. + + # ./tools/testing/fault-injection/failcmd.sh --times=100 \ + -- make -C tools/testing/selftests/ run_tests + +Same as above except to inject page allocation failure instead of slab +allocation failure. + + # env FAILCMD_TYPE=fail_page_alloc \ + ./tools/testing/fault-injection/failcmd.sh --times=100 \ + -- make -C tools/testing/selftests/ run_tests diff --git a/Documentation/fault-injection/notifier-error-inject.txt b/Documentation/fault-injection/notifier-error-inject.txt new file mode 100644 index 00000000000..c83526c364e --- /dev/null +++ b/Documentation/fault-injection/notifier-error-inject.txt @@ -0,0 +1,99 @@ +Notifier error injection +======================== + +Notifier error injection provides the ability to inject artifical errors to +specified notifier chain callbacks. It is useful to test the error handling of +notifier call chain failures which is rarely executed. There are kernel +modules that can be used to test the following notifiers. + + * CPU notifier + * PM notifier + * Memory hotplug notifier + * powerpc pSeries reconfig notifier + +CPU notifier error injection module +----------------------------------- +This feature can be used to test the error handling of the CPU notifiers by +injecting artifical errors to CPU notifier chain callbacks. + +If the notifier call chain should be failed with some events notified, write +the error code to debugfs interface +/sys/kernel/debug/notifier-error-inject/cpu/actions/<notifier event>/error + +Possible CPU notifier events to be failed are: + + * CPU_UP_PREPARE + * CPU_UP_PREPARE_FROZEN + * CPU_DOWN_PREPARE + * CPU_DOWN_PREPARE_FROZEN + +Example1: Inject CPU offline error (-1 == -EPERM) + + # cd /sys/kernel/debug/notifier-error-inject/cpu + # echo -1 > actions/CPU_DOWN_PREPARE/error + # echo 0 > /sys/devices/system/cpu/cpu1/online + bash: echo: write error: Operation not permitted + +Example2: inject CPU online error (-2 == -ENOENT) + + # echo -2 > actions/CPU_UP_PREPARE/error + # echo 1 > /sys/devices/system/cpu/cpu1/online + bash: echo: write error: No such file or directory + +PM notifier error injection module +---------------------------------- +This feature is controlled through debugfs interface +/sys/kernel/debug/notifier-error-inject/pm/actions/<notifier event>/error + +Possible PM notifier events to be failed are: + + * PM_HIBERNATION_PREPARE + * PM_SUSPEND_PREPARE + * PM_RESTORE_PREPARE + +Example: Inject PM suspend error (-12 = -ENOMEM) + + # cd /sys/kernel/debug/notifier-error-inject/pm/ + # echo -12 > actions/PM_SUSPEND_PREPARE/error + # echo mem > /sys/power/state + bash: echo: write error: Cannot allocate memory + +Memory hotplug notifier error injection module +---------------------------------------------- +This feature is controlled through debugfs interface +/sys/kernel/debug/notifier-error-inject/memory/actions/<notifier event>/error + +Possible memory notifier events to be failed are: + + * MEM_GOING_ONLINE + * MEM_GOING_OFFLINE + +Example: Inject memory hotplug offline error (-12 == -ENOMEM) + + # cd /sys/kernel/debug/notifier-error-inject/memory + # echo -12 > actions/MEM_GOING_OFFLINE/error + # echo offline > /sys/devices/system/memory/memoryXXX/state + bash: echo: write error: Cannot allocate memory + +powerpc pSeries reconfig notifier error injection module +-------------------------------------------------------- +This feature is controlled through debugfs interface +/sys/kernel/debug/notifier-error-inject/pSeries-reconfig/actions/<notifier event>/error + +Possible pSeries reconfig notifier events to be failed are: + + * PSERIES_RECONFIG_ADD + * PSERIES_RECONFIG_REMOVE + * PSERIES_DRCONF_MEM_ADD + * PSERIES_DRCONF_MEM_REMOVE + +For more usage examples +----------------------- +There are tools/testing/selftests using the notifier error injection features +for CPU and memory notifiers. + + * tools/testing/selftests/cpu-hotplug/on-off-test.sh + * tools/testing/selftests/memory-hotplug/on-off-test.sh + +These scripts first do simple online and offline tests and then do fault +injection tests if notifier error injection module is available. diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt index 76112dac765..e9237fb7195 100644 --- a/Documentation/feature-removal-schedule.txt +++ b/Documentation/feature-removal-schedule.txt @@ -600,3 +600,21 @@ When: June 2013 Why: Unsupported/unmaintained/unused since 2.6 ---------------------------- + +What: V4L2 selections API target rectangle and flags unification, the + following definitions will be removed: V4L2_SEL_TGT_CROP_ACTIVE, + V4L2_SEL_TGT_COMPOSE_ACTIVE, V4L2_SUBDEV_SEL_*, V4L2_SUBDEV_SEL_FLAG_* + in favor of common V4L2_SEL_TGT_* and V4L2_SEL_FLAG_* definitions. + For more details see include/linux/v4l2-common.h. +When: 3.8 +Why: The regular V4L2 selections and the subdev selection API originally + defined distinct names for the target rectangles and flags - V4L2_SEL_* + and V4L2_SUBDEV_SEL_*. Although, it turned out that the meaning of these + target rectangles is virtually identical and the APIs were consolidated + to use single set of names - V4L2_SEL_*. This didn't involve any ABI + changes. Alias definitions were created for the original ones to avoid + any instabilities in the user space interface. After few cycles these + backward compatibility definitions will be removed. +Who: Sylwester Nawrocki <sylvester.nawrocki@gmail.com> + +---------------------------- diff --git a/Documentation/input/edt-ft5x06.txt b/Documentation/input/edt-ft5x06.txt new file mode 100644 index 00000000000..2032f0b7a8f --- /dev/null +++ b/Documentation/input/edt-ft5x06.txt @@ -0,0 +1,54 @@ +EDT ft5x06 based Polytouch devices +---------------------------------- + +The edt-ft5x06 driver is useful for the EDT "Polytouch" family of capacitive +touch screens. Note that it is *not* suitable for other devices based on the +focaltec ft5x06 devices, since they contain vendor-specific firmware. In +particular this driver is not suitable for the Nook tablet. + +It has been tested with the following devices: + * EP0350M06 + * EP0430M06 + * EP0570M06 + * EP0700M06 + +The driver allows configuration of the touch screen via a set of sysfs files: + +/sys/class/input/eventX/device/device/threshold: + allows setting the "click"-threshold in the range from 20 to 80. + +/sys/class/input/eventX/device/device/gain: + allows setting the sensitivity in the range from 0 to 31. Note that + lower values indicate higher sensitivity. + +/sys/class/input/eventX/device/device/offset: + allows setting the edge compensation in the range from 0 to 31. + +/sys/class/input/eventX/device/device/report_rate: + allows setting the report rate in the range from 3 to 14. + + +For debugging purposes the driver provides a few files in the debug +filesystem (if available in the kernel). In /sys/kernel/debug/edt_ft5x06 +you'll find the following files: + +num_x, num_y: + (readonly) contains the number of sensor fields in X- and + Y-direction. + +mode: + allows switching the sensor between "factory mode" and "operation + mode" by writing "1" or "0" to it. In factory mode (1) it is + possible to get the raw data from the sensor. Note that in factory + mode regular events don't get delivered and the options described + above are unavailable. + +raw_data: + contains num_x * num_y big endian 16 bit values describing the raw + values for each sensor field. Note that each read() call on this + files triggers a new readout. It is recommended to provide a buffer + big enough to contain num_x * num_y * 2 bytes. + +Note that reading raw_data gives a I/O error when the device is not in factory +mode. The same happens when reading/writing to the parameter files when the +device is not in regular operation mode. diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index c2619ef44a7..ad7e2e5088c 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -526,7 +526,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted. coherent_pool=nn[KMG] [ARM,KNL] Sets the size of memory pool for coherent, atomic dma - allocations if Contiguous Memory Allocator (CMA) is used. + allocations, by default set to 256K. code_bytes [X86] How many bytes of object code to print in an oops report. diff --git a/Documentation/power/power_supply_class.txt b/Documentation/power/power_supply_class.txt index 211831d4095..2f0ddc15b5a 100644 --- a/Documentation/power/power_supply_class.txt +++ b/Documentation/power/power_supply_class.txt @@ -112,14 +112,24 @@ CHARGE_COUNTER - the current charge counter (in µAh). This could easily be negative; there is no empty or full value. It is only useful for relative, time-based measurements. +CONSTANT_CHARGE_CURRENT - constant charge current programmed by charger. + +CONSTANT_CHARGE_VOLTAGE - constant charge voltage programmed by charger. + ENERGY_FULL, ENERGY_EMPTY - same as above but for energy. CAPACITY - capacity in percents. +CAPACITY_ALERT_MIN - minimum capacity alert value in percents. +CAPACITY_ALERT_MAX - maximum capacity alert value in percents. CAPACITY_LEVEL - capacity level. This corresponds to POWER_SUPPLY_CAPACITY_LEVEL_*. TEMP - temperature of the power supply. +TEMP_ALERT_MIN - minimum battery temperature alert value in milli centigrade. +TEMP_ALERT_MAX - maximum battery temperature alert value in milli centigrade. TEMP_AMBIENT - ambient temperature. +TEMP_AMBIENT_ALERT_MIN - minimum ambient temperature alert value in milli centigrade. +TEMP_AMBIENT_ALERT_MAX - maximum ambient temperature alert value in milli centigrade. TIME_TO_EMPTY - seconds left for battery to be considered empty (i.e. while battery powers a load) diff --git a/Documentation/printk-formats.txt b/Documentation/printk-formats.txt index 5df176ed59b..7561d7ed8e1 100644 --- a/Documentation/printk-formats.txt +++ b/Documentation/printk-formats.txt @@ -53,9 +53,20 @@ Struct Resources: For printing struct resources. The 'R' and 'r' specifiers result in a printed resource with ('R') or without ('r') a decoded flags member. +Raw buffer as a hex string: + %*ph 00 01 02 ... 3f + %*phC 00:01:02: ... :3f + %*phD 00-01-02- ... -3f + %*phN 000102 ... 3f + + For printing a small buffers (up to 64 bytes long) as a hex string with + certain separator. For the larger buffers consider to use + print_hex_dump(). + MAC/FDDI addresses: %pM 00:01:02:03:04:05 + %pMR 05:04:03:02:01:00 %pMF 00-01-02-03-04-05 %pm 000102030405 @@ -67,6 +78,10 @@ MAC/FDDI addresses: the 'M' specifier to use dash ('-') separators instead of the default separator. + For Bluetooth addresses the 'R' specifier shall be used after the 'M' + specifier to use reversed byte order suitable for visual interpretation + of Bluetooth addresses which are in the little endian order. + IPv4 addresses: %pI4 1.2.3.4 diff --git a/Documentation/pwm.txt b/Documentation/pwm.txt new file mode 100644 index 00000000000..554290ebab9 --- /dev/null +++ b/Documentation/pwm.txt @@ -0,0 +1,76 @@ +Pulse Width Modulation (PWM) interface + +This provides an overview about the Linux PWM interface + +PWMs are commonly used for controlling LEDs, fans or vibrators in +cell phones. PWMs with a fixed purpose have no need implementing +the Linux PWM API (although they could). However, PWMs are often +found as discrete devices on SoCs which have no fixed purpose. It's +up to the board designer to connect them to LEDs or fans. To provide +this kind of flexibility the generic PWM API exists. + +Identifying PWMs +---------------- + +Users of the legacy PWM API use unique IDs to refer to PWM devices. + +Instead of referring to a PWM device via its unique ID, board setup code +should instead register a static mapping that can be used to match PWM +consumers to providers, as given in the following example: + + static struct pwm_lookup board_pwm_lookup[] = { + PWM_LOOKUP("tegra-pwm", 0, "pwm-backlight", NULL), + }; + + static void __init board_init(void) + { + ... + pwm_add_table(board_pwm_lookup, ARRAY_SIZE(board_pwm_lookup)); + ... + } + +Using PWMs +---------- + +Legacy users can request a PWM device using pwm_request() and free it +after usage with pwm_free(). + +New users should use the pwm_get() function and pass to it the consumer +device or a consumer name. pwm_put() is used to free the PWM device. + +After being requested a PWM has to be configured using: + +int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns); + +To start/stop toggling the PWM output use pwm_enable()/pwm_disable(). + +Implementing a PWM driver +------------------------- + +Currently there are two ways to implement pwm drivers. Traditionally +there only has been the barebone API meaning that each driver has +to implement the pwm_*() functions itself. This means that it's impossible +to have multiple PWM drivers in the system. For this reason it's mandatory +for new drivers to use the generic PWM framework. + +A new PWM controller/chip can be added using pwmchip_add() and removed +again with pwmchip_remove(). pwmchip_add() takes a filled in struct +pwm_chip as argument which provides a description of the PWM chip, the +number of PWM devices provider by the chip and the chip-specific +implementation of the supported PWM operations to the framework. + +Locking +------- + +The PWM core list manipulations are protected by a mutex, so pwm_request() +and pwm_free() may not be called from an atomic context. Currently the +PWM core does not enforce any locking to pwm_enable(), pwm_disable() and +pwm_config(), so the calling context is currently driver specific. This +is an issue derived from the former barebone API and should be fixed soon. + +Helpers +------- + +Currently a PWM can only be configured with period_ns and duty_ns. For several +use cases freq_hz and duty_percent might be better. Instead of calculating +this in your driver please consider adding appropriate helpers to the framework. diff --git a/Documentation/sysctl/fs.txt b/Documentation/sysctl/fs.txt index 13d6166d7a2..8c235b6e424 100644 --- a/Documentation/sysctl/fs.txt +++ b/Documentation/sysctl/fs.txt @@ -163,16 +163,22 @@ This value can be used to query and set the core dump mode for setuid or otherwise protected/tainted binaries. The modes are 0 - (default) - traditional behaviour. Any process which has changed - privilege levels or is execute only will not be dumped + privilege levels or is execute only will not be dumped. 1 - (debug) - all processes dump core when possible. The core dump is owned by the current user and no security is applied. This is intended for system debugging situations only. Ptrace is unchecked. + This is insecure as it allows regular users to examine the memory + contents of privileged processes. 2 - (suidsafe) - any binary which normally would not be dumped is dumped - readable by root only. This allows the end user to remove - such a dump but not access it directly. For security reasons - core dumps in this mode will not overwrite one another or - other files. This mode is appropriate when administrators are - attempting to debug problems in a normal environment. + anyway, but only if the "core_pattern" kernel sysctl is set to + either a pipe handler or a fully qualified path. (For more details + on this limitation, see CVE-2006-2451.) This mode is appropriate + when administrators are attempting to debug problems in a normal + environment, and either have a core dump pipe handler that knows + to treat privileged core dumps with care, or specific directory + defined for catching core dumps. If a core dump happens without + a pipe handler or fully qualifid path, a message will be emitted + to syslog warning about the lack of a correct setting. ============================================================== diff --git a/Documentation/video4linux/v4l2-framework.txt b/Documentation/video4linux/v4l2-framework.txt index 1f590527005..89318be6c1d 100644 --- a/Documentation/video4linux/v4l2-framework.txt +++ b/Documentation/video4linux/v4l2-framework.txt @@ -594,6 +594,15 @@ You should also set these fields: unlocked_ioctl file operation is called this lock will be taken by the core and released afterwards. See the next section for more details. +- queue: a pointer to the struct vb2_queue associated with this device node. + If queue is non-NULL, and queue->lock is non-NULL, then queue->lock is + used for the queuing ioctls (VIDIOC_REQBUFS, CREATE_BUFS, QBUF, DQBUF, + QUERYBUF, PREPARE_BUF, STREAMON and STREAMOFF) instead of the lock above. + That way the vb2 queuing framework does not have to wait for other ioctls. + This queue pointer is also used by the vb2 helper functions to check for + queuing ownership (i.e. is the filehandle calling it allowed to do the + operation). + - prio: keeps track of the priorities. Used to implement VIDIOC_G/S_PRIORITY. If left to NULL, then it will use the struct v4l2_prio_state in v4l2_device. If you want to have a separate priority state per (group of) device node(s), @@ -647,47 +656,43 @@ manually set the struct media_entity type and name fields. A reference to the entity will be automatically acquired/released when the video device is opened/closed. -v4l2_file_operations and locking --------------------------------- - -You can set a pointer to a mutex_lock in struct video_device. Usually this -will be either a top-level mutex or a mutex per device node. By default this -lock will be used for unlocked_ioctl, but you can disable locking for -selected ioctls by calling: - - void v4l2_disable_ioctl_locking(struct video_device *vdev, unsigned int cmd); - -E.g.: v4l2_disable_ioctl_locking(vdev, VIDIOC_DQBUF); +ioctls and locking +------------------ -You have to call this before you register the video_device. +The V4L core provides optional locking services. The main service is the +lock field in struct video_device, which is a pointer to a mutex. If you set +this pointer, then that will be used by unlocked_ioctl to serialize all ioctls. -Particularly with USB drivers where certain commands such as setting controls -can take a long time you may want to do your own locking for the buffer queuing -ioctls. +If you are using the videobuf2 framework, then there is a second lock that you +can set: video_device->queue->lock. If set, then this lock will be used instead +of video_device->lock to serialize all queuing ioctls (see the previous section +for the full list of those ioctls). -If you want still finer-grained locking then you have to set mutex_lock to NULL -and do you own locking completely. +The advantage of using a different lock for the queuing ioctls is that for some +drivers (particularly USB drivers) certain commands such as setting controls +can take a long time, so you want to use a separate lock for the buffer queuing +ioctls. That way your VIDIOC_DQBUF doesn't stall because the driver is busy +changing the e.g. exposure of the webcam. -It is up to the driver developer to decide which method to use. However, if -your driver has high-latency operations (for example, changing the exposure -of a USB webcam might take a long time), then you might be better off with -doing your own locking if you want to allow the user to do other things with -the device while waiting for the high-latency command to finish. +Of course, you can always do all the locking yourself by leaving both lock +pointers at NULL. -If a lock is specified then all ioctl commands will be serialized on that -lock. If you use videobuf then you must pass the same lock to the videobuf -queue initialize function: if videobuf has to wait for a frame to arrive, then -it will temporarily unlock the lock and relock it afterwards. If your driver -also waits in the code, then you should do the same to allow other processes -to access the device node while the first process is waiting for something. +If you use the old videobuf then you must pass the video_device lock to the +videobuf queue initialize function: if videobuf has to wait for a frame to +arrive, then it will temporarily unlock the lock and relock it afterwards. If +your driver also waits in the code, then you should do the same to allow other +processes to access the device node while the first process is waiting for +something. In the case of videobuf2 you will need to implement the wait_prepare and -wait_finish callbacks to unlock/lock if applicable. In particular, if you use -the lock in struct video_device then you must unlock/lock this mutex in -wait_prepare and wait_finish. - -The implementation of a hotplug disconnect should also take the lock before -calling v4l2_device_disconnect. +wait_finish callbacks to unlock/lock if applicable. If you use the queue->lock +pointer, then you can use the helper functions vb2_ops_wait_prepare/finish. + +The implementation of a hotplug disconnect should also take the lock from +video_device before calling v4l2_device_disconnect. If you are also using +video_device->queue->lock, then you have to first lock video_device->queue->lock +followed by video_device->lock. That way you can be sure no ioctl is running +when you call v4l2_device_disconnect. video_device registration ------------------------- |