diff options
Diffstat (limited to 'Documentation')
63 files changed, 1422 insertions, 307 deletions
diff --git a/Documentation/ABI/removed/o2cb b/Documentation/ABI/removed/o2cb index 7f5daa46509..20c91adca6d 100644 --- a/Documentation/ABI/removed/o2cb +++ b/Documentation/ABI/removed/o2cb @@ -1,6 +1,6 @@ What: /sys/o2cb symlink Date: May 2011 -KernelVersion: 2.6.40 +KernelVersion: 3.0 Contact: ocfs2-devel@oss.oracle.com Description: This is a symlink: /sys/o2cb to /sys/fs/o2cb. The symlink is removed when new versions of ocfs2-tools which know to look diff --git a/Documentation/ABI/removed/raw1394 b/Documentation/ABI/removed/raw1394 index 490aa1efc4a..ec333e67632 100644 --- a/Documentation/ABI/removed/raw1394 +++ b/Documentation/ABI/removed/raw1394 @@ -5,7 +5,7 @@ Description: /dev/raw1394 was a character device file that allowed low-level access to FireWire buses. Its major drawbacks were its inability to implement sensible device security policies, and its low level - of abstraction that required userspace clients do duplicate much + of abstraction that required userspace clients to duplicate much of the kernel's ieee1394 core functionality. Replaced by /dev/fw*, i.e. the <linux/firewire-cdev.h> ABI of firewire-core. diff --git a/Documentation/ABI/testing/evm b/Documentation/ABI/testing/evm new file mode 100644 index 00000000000..8374d4557e5 --- /dev/null +++ b/Documentation/ABI/testing/evm @@ -0,0 +1,23 @@ +What: security/evm +Date: March 2011 +Contact: Mimi Zohar <zohar@us.ibm.com> +Description: + EVM protects a file's security extended attributes(xattrs) + against integrity attacks. The initial method maintains an + HMAC-sha1 value across the extended attributes, storing the + value as the extended attribute 'security.evm'. + + EVM depends on the Kernel Key Retention System to provide it + with a trusted/encrypted key for the HMAC-sha1 operation. + The key is loaded onto the root's keyring using keyctl. Until + EVM receives notification that the key has been successfully + loaded onto the keyring (echo 1 > <securityfs>/evm), EVM + can not create or validate the 'security.evm' xattr, but + returns INTEGRITY_UNKNOWN. Loading the key and signaling EVM + should be done as early as possible. Normally this is done + in the initramfs, which has already been measured as part + of the trusted boot. For more information on creating and + loading existing trusted/encrypted keys, refer to: + Documentation/keys-trusted-encrypted.txt. (A sample dracut + patch, which loads the trusted/encrypted key and enables + EVM, is available from http://linux-ima.sourceforge.net/#EVM.) diff --git a/Documentation/ABI/testing/sysfs-bus-bcma b/Documentation/ABI/testing/sysfs-bus-bcma index 06b62badddd..721b4aea302 100644 --- a/Documentation/ABI/testing/sysfs-bus-bcma +++ b/Documentation/ABI/testing/sysfs-bus-bcma @@ -1,6 +1,6 @@ What: /sys/bus/bcma/devices/.../manuf Date: May 2011 -KernelVersion: 2.6.40 +KernelVersion: 3.0 Contact: RafaÅ‚ MiÅ‚ecki <zajec5@gmail.com> Description: Each BCMA core has it's manufacturer id. See @@ -8,7 +8,7 @@ Description: What: /sys/bus/bcma/devices/.../id Date: May 2011 -KernelVersion: 2.6.40 +KernelVersion: 3.0 Contact: RafaÅ‚ MiÅ‚ecki <zajec5@gmail.com> Description: There are a few types of BCMA cores, they can be identified by @@ -16,7 +16,7 @@ Description: What: /sys/bus/bcma/devices/.../rev Date: May 2011 -KernelVersion: 2.6.40 +KernelVersion: 3.0 Contact: RafaÅ‚ MiÅ‚ecki <zajec5@gmail.com> Description: BCMA cores of the same type can still slightly differ depending @@ -24,7 +24,7 @@ Description: What: /sys/bus/bcma/devices/.../class Date: May 2011 -KernelVersion: 2.6.40 +KernelVersion: 3.0 Contact: RafaÅ‚ MiÅ‚ecki <zajec5@gmail.com> Description: Each BCMA core is identified by few fields, including class it diff --git a/Documentation/ABI/testing/sysfs-bus-pci-drivers-ehci_hcd b/Documentation/ABI/testing/sysfs-bus-pci-drivers-ehci_hcd new file mode 100644 index 00000000000..60c60fa624b --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-pci-drivers-ehci_hcd @@ -0,0 +1,46 @@ +What: /sys/bus/pci/drivers/ehci_hcd/.../companion + /sys/bus/usb/devices/usbN/../companion +Date: January 2007 +KernelVersion: 2.6.21 +Contact: Alan Stern <stern@rowland.harvard.edu> +Description: + PCI-based EHCI USB controllers (i.e., high-speed USB-2.0 + controllers) are often implemented along with a set of + "companion" full/low-speed USB-1.1 controllers. When a + high-speed device is plugged in, the connection is routed + to the EHCI controller; when a full- or low-speed device + is plugged in, the connection is routed to the companion + controller. + + Sometimes you want to force a high-speed device to connect + at full speed, which can be accomplished by forcing the + connection to be routed to the companion controller. + That's what this file does. Writing a port number to the + file causes connections on that port to be routed to the + companion controller, and writing the negative of a port + number returns the port to normal operation. + + For example: To force the high-speed device attached to + port 4 on bus 2 to run at full speed: + + echo 4 >/sys/bus/usb/devices/usb2/../companion + + To return the port to high-speed operation: + + echo -4 >/sys/bus/usb/devices/usb2/../companion + + Reading the file gives the list of ports currently forced + to the companion controller. + + Note: Some EHCI controllers do not have companions; they + may contain an internal "transaction translator" or they + may be attached directly to a "rate-matching hub". This + mechanism will not work with such controllers. Also, it + cannot be used to force a port on a high-speed hub to + connect at full speed. + + Note: When this file was first added, it appeared in a + different sysfs directory. The location given above is + correct for 2.6.35 (and probably several earlier kernel + versions as well). + diff --git a/Documentation/ABI/testing/sysfs-bus-usb b/Documentation/ABI/testing/sysfs-bus-usb index 294aa864a60..e647378e9e8 100644 --- a/Documentation/ABI/testing/sysfs-bus-usb +++ b/Documentation/ABI/testing/sysfs-bus-usb @@ -142,3 +142,18 @@ Description: such devices. Users: usb_modeswitch + +What: /sys/bus/usb/devices/.../power/usb2_hardware_lpm +Date: September 2011 +Contact: Andiry Xu <andiry.xu@amd.com> +Description: + If CONFIG_USB_SUSPEND is set and a USB 2.0 lpm-capable device + is plugged in to a xHCI host which support link PM, it will + perform a LPM test; if the test is passed and host supports + USB2 hardware LPM (xHCI 1.0 feature), USB2 hardware LPM will + be enabled for the device and the USB device directory will + contain a file named power/usb2_hardware_lpm. The file holds + a string value (enable or disable) indicating whether or not + USB2 hardware LPM is enabled for the device. Developer can + write y/Y/1 or n/N/0 to the file to enable/disable the + feature. diff --git a/Documentation/ABI/testing/sysfs-class-backlight-driver-adp8870 b/Documentation/ABI/testing/sysfs-class-backlight-driver-adp8870 index aa11dbdd794..4a9c545bda4 100644 --- a/Documentation/ABI/testing/sysfs-class-backlight-driver-adp8870 +++ b/Documentation/ABI/testing/sysfs-class-backlight-driver-adp8870 @@ -4,8 +4,8 @@ What: /sys/class/backlight/<backlight>/l2_bright_max What: /sys/class/backlight/<backlight>/l3_office_max What: /sys/class/backlight/<backlight>/l4_indoor_max What: /sys/class/backlight/<backlight>/l5_dark_max -Date: Mai 2011 -KernelVersion: 2.6.40 +Date: May 2011 +KernelVersion: 3.0 Contact: device-drivers-devel@blackfin.uclinux.org Description: Control the maximum brightness for <ambient light zone> @@ -18,8 +18,8 @@ What: /sys/class/backlight/<backlight>/l2_bright_dim What: /sys/class/backlight/<backlight>/l3_office_dim What: /sys/class/backlight/<backlight>/l4_indoor_dim What: /sys/class/backlight/<backlight>/l5_dark_dim -Date: Mai 2011 -KernelVersion: 2.6.40 +Date: May 2011 +KernelVersion: 3.0 Contact: device-drivers-devel@blackfin.uclinux.org Description: Control the dim brightness for <ambient light zone> @@ -29,8 +29,8 @@ Description: this <ambient light zone>. What: /sys/class/backlight/<backlight>/ambient_light_level -Date: Mai 2011 -KernelVersion: 2.6.40 +Date: May 2011 +KernelVersion: 3.0 Contact: device-drivers-devel@blackfin.uclinux.org Description: Get conversion value of the light sensor. @@ -39,8 +39,8 @@ Description: 8000 (max ambient brightness) What: /sys/class/backlight/<backlight>/ambient_light_zone -Date: Mai 2011 -KernelVersion: 2.6.40 +Date: May 2011 +KernelVersion: 3.0 Contact: device-drivers-devel@blackfin.uclinux.org Description: Get/Set current ambient light zone. Reading returns diff --git a/Documentation/ABI/testing/sysfs-class-net-mesh b/Documentation/ABI/testing/sysfs-class-net-mesh index 748fe1701d2..b02001488ee 100644 --- a/Documentation/ABI/testing/sysfs-class-net-mesh +++ b/Documentation/ABI/testing/sysfs-class-net-mesh @@ -22,6 +22,14 @@ Description: mesh will be fragmented or silently discarded if the packet size exceeds the outgoing interface MTU. +What: /sys/class/net/<mesh_iface>/mesh/ap_isolation +Date: May 2011 +Contact: Antonio Quartulli <ordex@autistici.org> +Description: + Indicates whether the data traffic going from a + wireless client to another wireless client will be + silently dropped. + What: /sys/class/net/<mesh_iface>/mesh/gw_bandwidth Date: October 2010 Contact: Marek Lindner <lindner_marek@yahoo.de> diff --git a/Documentation/ABI/testing/sysfs-driver-hid-logitech-lg4ff b/Documentation/ABI/testing/sysfs-driver-hid-logitech-lg4ff new file mode 100644 index 00000000000..9aec8ef228b --- /dev/null +++ b/Documentation/ABI/testing/sysfs-driver-hid-logitech-lg4ff @@ -0,0 +1,7 @@ +What: /sys/module/hid_logitech/drivers/hid:logitech/<dev>/range. +Date: July 2011 +KernelVersion: 3.2 +Contact: Michal Malý <madcatxster@gmail.com> +Description: Display minimum, maximum and current range of the steering + wheel. Writing a value within min and max boundaries sets the + range of the wheel. diff --git a/Documentation/DocBook/80211.tmpl b/Documentation/DocBook/80211.tmpl index 445289cd0e6..2014155c899 100644 --- a/Documentation/DocBook/80211.tmpl +++ b/Documentation/DocBook/80211.tmpl @@ -433,8 +433,18 @@ Insert notes about VLAN interfaces with hw crypto here or in the hw crypto chapter. </para> + <section id="ps-client"> + <title>support for powersaving clients</title> +!Pinclude/net/mac80211.h AP support for powersaving clients + </section> !Finclude/net/mac80211.h ieee80211_get_buffered_bc !Finclude/net/mac80211.h ieee80211_beacon_get +!Finclude/net/mac80211.h ieee80211_sta_eosp_irqsafe +!Finclude/net/mac80211.h ieee80211_frame_release_type +!Finclude/net/mac80211.h ieee80211_sta_ps_transition +!Finclude/net/mac80211.h ieee80211_sta_ps_transition_ni +!Finclude/net/mac80211.h ieee80211_sta_set_buffered +!Finclude/net/mac80211.h ieee80211_sta_block_awake </chapter> <chapter id="multi-iface"> @@ -460,7 +470,6 @@ !Finclude/net/mac80211.h sta_notify_cmd !Finclude/net/mac80211.h ieee80211_find_sta !Finclude/net/mac80211.h ieee80211_find_sta_by_ifaddr -!Finclude/net/mac80211.h ieee80211_sta_block_awake </chapter> <chapter id="hardware-scan-offload"> diff --git a/Documentation/DocBook/uio-howto.tmpl b/Documentation/DocBook/uio-howto.tmpl index 7c4b514d62b..54883de5d5f 100644 --- a/Documentation/DocBook/uio-howto.tmpl +++ b/Documentation/DocBook/uio-howto.tmpl @@ -529,7 +529,7 @@ memory (e.g. allocated with <function>kmalloc()</function>). There's also </para></listitem> <listitem><para> -<varname>unsigned long addr</varname>: Required if the mapping is used. +<varname>phys_addr_t addr</varname>: Required if the mapping is used. Fill in the address of your memory block. This address is the one that appears in sysfs. </para></listitem> diff --git a/Documentation/PCI/pci.txt b/Documentation/PCI/pci.txt index 6148d4080f8..aa09e5476bb 100644 --- a/Documentation/PCI/pci.txt +++ b/Documentation/PCI/pci.txt @@ -314,7 +314,7 @@ from the PCI device config space. Use the values in the pci_dev structure as the PCI "bus address" might have been remapped to a "host physical" address by the arch/chip-set specific kernel support. -See Documentation/IO-mapping.txt for how to access device registers +See Documentation/io-mapping.txt for how to access device registers or device memory. The device driver needs to call pci_request_region() to verify diff --git a/Documentation/blackfin/bfin-gpio-notes.txt b/Documentation/blackfin/bfin-gpio-notes.txt index f731c1e5647..d36b01f778b 100644 --- a/Documentation/blackfin/bfin-gpio-notes.txt +++ b/Documentation/blackfin/bfin-gpio-notes.txt @@ -1,5 +1,5 @@ /* - * File: Documentation/blackfin/bfin-gpio-note.txt + * File: Documentation/blackfin/bfin-gpio-notes.txt * Based on: * Author: * diff --git a/Documentation/block/biodoc.txt b/Documentation/block/biodoc.txt index c6d84cfd2f5..e418dc0a708 100644 --- a/Documentation/block/biodoc.txt +++ b/Documentation/block/biodoc.txt @@ -186,7 +186,7 @@ a virtual address mapping (unlike the earlier scheme of virtual address do not have a corresponding kernel virtual address space mapping) and low-memory pages. -Note: Please refer to Documentation/PCI/PCI-DMA-mapping.txt for a discussion +Note: Please refer to Documentation/DMA-API-HOWTO.txt for a discussion on PCI high mem DMA aspects and mapping of scatter gather lists, and support for 64 bit PCI. diff --git a/Documentation/bus-virt-phys-mapping.txt b/Documentation/bus-virt-phys-mapping.txt index 1b5aa10df84..2bc55ff3b4d 100644 --- a/Documentation/bus-virt-phys-mapping.txt +++ b/Documentation/bus-virt-phys-mapping.txt @@ -1,6 +1,6 @@ [ NOTE: The virt_to_bus() and bus_to_virt() functions have been superseded by the functionality provided by the PCI DMA interface - (see Documentation/PCI/PCI-DMA-mapping.txt). They continue + (see Documentation/DMA-API-HOWTO.txt). They continue to be documented below for historical purposes, but new code must not use them. --davidm 00/12/12 ] diff --git a/Documentation/cdrom/packet-writing.txt b/Documentation/cdrom/packet-writing.txt index 13c251d5add..2834170d821 100644 --- a/Documentation/cdrom/packet-writing.txt +++ b/Documentation/cdrom/packet-writing.txt @@ -109,7 +109,7 @@ this interface. (see http://tom.ist-im-web.de/download/pktcdvd ) For a description of the sysfs interface look into the file: - Documentation/ABI/testing/sysfs-block-pktcdvd + Documentation/ABI/testing/sysfs-class-pktcdvd Using the pktcdvd debugfs interface diff --git a/Documentation/cpu-freq/governors.txt b/Documentation/cpu-freq/governors.txt index e74d0a2eb1c..d221781daba 100644 --- a/Documentation/cpu-freq/governors.txt +++ b/Documentation/cpu-freq/governors.txt @@ -132,7 +132,7 @@ The sampling rate is limited by the HW transition latency: transition_latency * 100 Or by kernel restrictions: If CONFIG_NO_HZ is set, the limit is 10ms fixed. -If CONFIG_NO_HZ is not set or no_hz=off boot parameter is used, the +If CONFIG_NO_HZ is not set or nohz=off boot parameter is used, the limits depend on the CONFIG_HZ option: HZ=1000: min=20000us (20ms) HZ=250: min=80000us (80ms) diff --git a/Documentation/development-process/4.Coding b/Documentation/development-process/4.Coding index 83f5f5b365a..e3cb6a56653 100644 --- a/Documentation/development-process/4.Coding +++ b/Documentation/development-process/4.Coding @@ -278,7 +278,7 @@ enabled, a configurable percentage of memory allocations will be made to fail; these failures can be restricted to a specific range of code. Running with fault injection enabled allows the programmer to see how the code responds when things go badly. See -Documentation/fault-injection/fault-injection.text for more information on +Documentation/fault-injection/fault-injection.txt for more information on how to use this facility. Other kinds of errors can be found with the "sparse" static analysis tool. diff --git a/Documentation/devicetree/bindings/arm/l2cc.txt b/Documentation/devicetree/bindings/arm/l2cc.txt new file mode 100644 index 00000000000..7ca52161e7a --- /dev/null +++ b/Documentation/devicetree/bindings/arm/l2cc.txt @@ -0,0 +1,44 @@ +* ARM L2 Cache Controller + +ARM cores often have a separate level 2 cache controller. There are various +implementations of the L2 cache controller with compatible programming models. +The ARM L2 cache representation in the device tree should be done as follows: + +Required properties: + +- compatible : should be one of: + "arm,pl310-cache" + "arm,l220-cache" + "arm,l210-cache" +- cache-unified : Specifies the cache is a unified cache. +- cache-level : Should be set to 2 for a level 2 cache. +- reg : Physical base address and size of cache controller's memory mapped + registers. + +Optional properties: + +- arm,data-latency : Cycles of latency for Data RAM accesses. Specifies 3 cells of + read, write and setup latencies. Minimum valid values are 1. Controllers + without setup latency control should use a value of 0. +- arm,tag-latency : Cycles of latency for Tag RAM accesses. Specifies 3 cells of + read, write and setup latencies. Controllers without setup latency control + should use 0. Controllers without separate read and write Tag RAM latency + values should only use the first cell. +- arm,dirty-latency : Cycles of latency for Dirty RAMs. This is a single cell. +- arm,filter-ranges : <start length> Starting address and length of window to + filter. Addresses in the filter window are directed to the M1 port. Other + addresses will go to the M0 port. +- interrupts : 1 combined interrupt. + +Example: + +L2: cache-controller { + compatible = "arm,pl310-cache"; + reg = <0xfff12000 0x1000>; + arm,data-latency = <1 1 1>; + arm,tag-latency = <2 2 2>; + arm,filter-latency = <0x80000000 0x8000000>; + cache-unified; + cache-level = <2>; + interrupts = <45>; +}; diff --git a/Documentation/devicetree/bindings/gpio/led.txt b/Documentation/devicetree/bindings/gpio/led.txt index 064db928c3c..141087cf310 100644 --- a/Documentation/devicetree/bindings/gpio/led.txt +++ b/Documentation/devicetree/bindings/gpio/led.txt @@ -8,7 +8,7 @@ node's name represents the name of the corresponding LED. LED sub-node properties: - gpios : Should specify the LED's GPIO, see "Specifying GPIO information - for devices" in Documentation/powerpc/booting-without-of.txt. Active + for devices" in Documentation/devicetree/booting-without-of.txt. Active low LEDs should be indicated using flags in the GPIO specifier. - label : (optional) The label for this LED. If omitted, the label is taken from the node name (excluding the unit address). diff --git a/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt b/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt index 1a729f08986..1ad80d5865a 100644 --- a/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt +++ b/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt @@ -1,61 +1,24 @@ -CAN Device Tree Bindings ------------------------- -2011 Freescale Semiconductor, Inc. +Flexcan CAN contoller on Freescale's ARM and PowerPC system-on-a-chip (SOC). -fsl,flexcan-v1.0 nodes ------------------------ -In addition to the required compatible-, reg- and interrupt-properties, you can -also specify which clock source shall be used for the controller. +Required properties: -CPI Clock- Can Protocol Interface Clock - This CLK_SRC bit of CTRL(control register) selects the clock source to - the CAN Protocol Interface(CPI) to be either the peripheral clock - (driven by the PLL) or the crystal oscillator clock. The selected clock - is the one fed to the prescaler to generate the Serial Clock (Sclock). - The PRESDIV field of CTRL(control register) controls a prescaler that - generates the Serial Clock (Sclock), whose period defines the - time quantum used to compose the CAN waveform. +- compatible : Should be "fsl,<processor>-flexcan" -Can Engine Clock Source - There are two sources for CAN clock - - Platform Clock It represents the bus clock - - Oscillator Clock + An implementation should also claim any of the following compatibles + that it is fully backwards compatible with: - Peripheral Clock (PLL) - -------------- - | - --------- ------------- - | |CPI Clock | Prescaler | Sclock - | |---------------->| (1.. 256) |------------> - --------- ------------- - | | - -------------- ---------------------CLK_SRC - Oscillator Clock + - fsl,p1010-flexcan -- fsl,flexcan-clock-source : CAN Engine Clock Source.This property selects - the peripheral clock. PLL clock is fed to the - prescaler to generate the Serial Clock (Sclock). - Valid values are "oscillator" and "platform" - "oscillator": CAN engine clock source is oscillator clock. - "platform" The CAN engine clock source is the bus clock - (platform clock). +- reg : Offset and length of the register set for this device +- interrupts : Interrupt tuple for this device +- clock-frequency : The oscillator frequency driving the flexcan device -- fsl,flexcan-clock-divider : for the reference and system clock, an additional - clock divider can be specified. -- clock-frequency: frequency required to calculate the bitrate for FlexCAN. +Example: -Note: - - v1.0 of flexcan-v1.0 represent the IP block version for P1010 SOC. - - P1010 does not have oscillator as the Clock Source.So the default - Clock Source is platform clock. -Examples: - - can0@1c000 { - compatible = "fsl,flexcan-v1.0"; + can@1c000 { + compatible = "fsl,p1010-flexcan"; reg = <0x1c000 0x1000>; interrupts = <48 0x2>; interrupt-parent = <&mpic>; - fsl,flexcan-clock-source = "platform"; - fsl,flexcan-clock-divider = <2>; - clock-frequency = <fixed by u-boot>; + clock-frequency = <200000000>; // filled in by bootloader }; diff --git a/Documentation/devicetree/bindings/net/smsc911x.txt b/Documentation/devicetree/bindings/net/smsc911x.txt new file mode 100644 index 00000000000..adb5b5744ec --- /dev/null +++ b/Documentation/devicetree/bindings/net/smsc911x.txt @@ -0,0 +1,38 @@ +* Smart Mixed-Signal Connectivity (SMSC) LAN911x/912x Controller + +Required properties: +- compatible : Should be "smsc,lan<model>", "smsc,lan9115" +- reg : Address and length of the io space for SMSC LAN +- interrupts : Should contain SMSC LAN interrupt line +- interrupt-parent : Should be the phandle for the interrupt controller + that services interrupts for this device +- phy-mode : String, operation mode of the PHY interface. + Supported values are: "mii", "gmii", "sgmii", "tbi", "rmii", + "rgmii", "rgmii-id", "rgmii-rxid", "rgmii-txid", "rtbi", "smii". + +Optional properties: +- reg-shift : Specify the quantity to shift the register offsets by +- reg-io-width : Specify the size (in bytes) of the IO accesses that + should be performed on the device. Valid value for SMSC LAN is + 2 or 4. If it's omitted or invalid, the size would be 2. +- smsc,irq-active-high : Indicates the IRQ polarity is active-high +- smsc,irq-push-pull : Indicates the IRQ type is push-pull +- smsc,force-internal-phy : Forces SMSC LAN controller to use + internal PHY +- smsc,force-external-phy : Forces SMSC LAN controller to use + external PHY +- smsc,save-mac-address : Indicates that mac address needs to be saved + before resetting the controller +- local-mac-address : 6 bytes, mac address + +Examples: + +lan9220@f4000000 { + compatible = "smsc,lan9220", "smsc,lan9115"; + reg = <0xf4000000 0x2000000>; + phy-mode = "mii"; + interrupt-parent = <&gpio1>; + interrupts = <31>; + reg-io-width = <4>; + smsc,irq-push-pull; +}; diff --git a/Documentation/driver-model/binding.txt b/Documentation/driver-model/binding.txt index f7ec9d625bf..abfc8e290d5 100644 --- a/Documentation/driver-model/binding.txt +++ b/Documentation/driver-model/binding.txt @@ -48,10 +48,6 @@ devclass_add_device is called to enumerate the device within the class and actually register it with the class, which happens with the class's register_dev callback. -NOTE: The device class structures and core routines to manipulate them -are not in the mainline kernel, so the discussion is still a bit -speculative. - Driver ~~~~~~ diff --git a/Documentation/driver-model/device.txt b/Documentation/driver-model/device.txt index bdefe728a73..1e70220d20f 100644 --- a/Documentation/driver-model/device.txt +++ b/Documentation/driver-model/device.txt @@ -45,33 +45,52 @@ struct device_attribute { const char *buf, size_t count); }; -Attributes of devices can be exported via drivers using a simple -procfs-like interface. +Attributes of devices can be exported by a device driver through sysfs. Please see Documentation/filesystems/sysfs.txt for more information on how sysfs works. +As explained in Documentation/kobject.txt, device attributes must be be +created before the KOBJ_ADD uevent is generated. The only way to realize +that is by defining an attribute group. + Attributes are declared using a macro called DEVICE_ATTR: #define DEVICE_ATTR(name,mode,show,store) Example: -DEVICE_ATTR(power,0644,show_power,store_power); +static DEVICE_ATTR(type, 0444, show_type, NULL); +static DEVICE_ATTR(power, 0644, show_power, store_power); -This declares a structure of type struct device_attribute named -'dev_attr_power'. This can then be added and removed to the device's -directory using: +This declares two structures of type struct device_attribute with respective +names 'dev_attr_type' and 'dev_attr_power'. These two attributes can be +organized as follows into a group: -int device_create_file(struct device *device, struct device_attribute * entry); -void device_remove_file(struct device * dev, struct device_attribute * attr); +static struct attribute *dev_attrs[] = { + &dev_attr_type.attr, + &dev_attr_power.attr, + NULL, +}; -Example: +static struct attribute_group dev_attr_group = { + .attrs = dev_attrs, +}; + +static const struct attribute_group *dev_attr_groups[] = { + &dev_attr_group, + NULL, +}; + +This array of groups can then be associated with a device by setting the +group pointer in struct device before device_register() is invoked: -device_create_file(dev,&dev_attr_power); -device_remove_file(dev,&dev_attr_power); + dev->groups = dev_attr_groups; + device_register(dev); -The file name will be 'power' with a mode of 0644 (-rw-r--r--). +The device_register() function will use the 'groups' pointer to create the +device attributes and the device_unregister() function will use this pointer +to remove the device attributes. Word of warning: While the kernel allows device_create_file() and device_remove_file() to be called on a device at any time, userspace has @@ -84,24 +103,4 @@ not know about the new attributes. This is important for device driver that need to publish additional attributes for a device at driver probe time. If the device driver simply calls device_create_file() on the device structure passed to it, then -userspace will never be notified of the new attributes. Instead, it should -probably use class_create() and class->dev_attrs to set up a list of -desired attributes in the modules_init function, and then in the .probe() -hook, and then use device_create() to create a new device as a child -of the probed device. The new device will generate a new uevent and -properly advertise the new attributes to userspace. - -For example, if a driver wanted to add the following attributes: -struct device_attribute mydriver_attribs[] = { - __ATTR(port_count, 0444, port_count_show), - __ATTR(serial_number, 0444, serial_number_show), - NULL -}; - -Then in the module init function is would do: - mydriver_class = class_create(THIS_MODULE, "my_attrs"); - mydriver_class.dev_attr = mydriver_attribs; - -And assuming 'dev' is the struct device passed into the probe hook, the driver -probe function would do something like: - device_create(&mydriver_class, dev, chrdev, &private_data, "my_name"); +userspace will never be notified of the new attributes. diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt index 4dc46547766..d5ac362daef 100644 --- a/Documentation/feature-removal-schedule.txt +++ b/Documentation/feature-removal-schedule.txt @@ -594,9 +594,18 @@ Why: In 3.0, we can now autodetect internal 3G device and already have Who: Lee, Chun-Yi <jlee@novell.com> ---------------------------- + What: The XFS nodelaylog mount option When: 3.3 Why: The delaylog mode that has been the default since 2.6.39 has proven stable, and the old code is in the way of additional improvements in the log code. Who: Christoph Hellwig <hch@lst.de> + +---------------------------- + +What: iwlagn alias support +When: 3.5 +Why: The iwlagn module has been renamed iwlwifi. The alias will be around + for backward compatibility for several cycles and then dropped. +Who: Don Fry <donald.h.fry@intel.com> diff --git a/Documentation/filesystems/caching/object.txt b/Documentation/filesystems/caching/object.txt index e8b0a35d8fe..58313348da8 100644 --- a/Documentation/filesystems/caching/object.txt +++ b/Documentation/filesystems/caching/object.txt @@ -127,9 +127,9 @@ fscache_enqueue_object()). PROVISION OF CPU TIME --------------------- -The work to be done by the various states is given CPU time by the threads of -the slow work facility (see Documentation/slow-work.txt). This is used in -preference to the workqueue facility because: +The work to be done by the various states was given CPU time by the threads of +the slow work facility. This was used in preference to the workqueue facility +because: (1) Threads may be completely occupied for very long periods of time by a particular work item. These state actions may be doing sequences of diff --git a/Documentation/filesystems/locks.txt b/Documentation/filesystems/locks.txt index fab857accbd..2cf81082581 100644 --- a/Documentation/filesystems/locks.txt +++ b/Documentation/filesystems/locks.txt @@ -53,11 +53,12 @@ fcntl(), with all the problems that implies. 1.3 Mandatory Locking As A Mount Option --------------------------------------- -Mandatory locking, as described in 'Documentation/filesystems/mandatory.txt' -was prior to this release a general configuration option that was valid for -all mounted filesystems. This had a number of inherent dangers, not the -least of which was the ability to freeze an NFS server by asking it to read -a file for which a mandatory lock existed. +Mandatory locking, as described in +'Documentation/filesystems/mandatory-locking.txt' was prior to this release a +general configuration option that was valid for all mounted filesystems. This +had a number of inherent dangers, not the least of which was the ability to +freeze an NFS server by asking it to read a file for which a mandatory lock +existed. From this release of the kernel, mandatory locking can be turned on and off on a per-filesystem basis, using the mount options 'mand' and 'nomand'. diff --git a/Documentation/filesystems/nfs/idmapper.txt b/Documentation/filesystems/nfs/idmapper.txt index 9c8fd614865..120fd3cf7fd 100644 --- a/Documentation/filesystems/nfs/idmapper.txt +++ b/Documentation/filesystems/nfs/idmapper.txt @@ -47,7 +47,7 @@ request-key will find the first matching line and corresponding program. In this case, /some/other/program will handle all uid lookups and /usr/sbin/nfs.idmap will handle gid, user, and group lookups. -See <file:Documentation/security/keys-request-keys.txt> for more information +See <file:Documentation/security/keys-request-key.txt> for more information about the request-key function. diff --git a/Documentation/filesystems/pohmelfs/design_notes.txt b/Documentation/filesystems/pohmelfs/design_notes.txt index dcf83358716..8aef9133570 100644 --- a/Documentation/filesystems/pohmelfs/design_notes.txt +++ b/Documentation/filesystems/pohmelfs/design_notes.txt @@ -58,8 +58,9 @@ data transfers. POHMELFS clients operate with a working set of servers and are capable of balancing read-only operations (like lookups or directory listings) between them according to IO priorities. Administrators can add or remove servers from the set at run-time via special commands (described -in Documentation/pohmelfs/info.txt file). Writes are replicated to all servers, which are connected -with write permission turned on. IO priority and permissions can be changed in run-time. +in Documentation/filesystems/pohmelfs/info.txt file). Writes are replicated to all servers, which +are connected with write permission turned on. IO priority and permissions can be changed in +run-time. POHMELFS is capable of full data channel encryption and/or strong crypto hashing. One can select any kernel supported cipher, encryption mode, hash type and operation mode diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt index db3b1aba32a..0ec91f03422 100644 --- a/Documentation/filesystems/proc.txt +++ b/Documentation/filesystems/proc.txt @@ -1263,7 +1263,7 @@ review the kernel documentation in the directory /usr/src/linux/Documentation. This chapter is heavily based on the documentation included in the pre 2.2 kernels, and became part of it in version 2.2.1 of the Linux kernel. -Please see: Documentation/sysctls/ directory for descriptions of these +Please see: Documentation/sysctl/ directory for descriptions of these entries. ------------------------------------------------------------------------------ diff --git a/Documentation/filesystems/sysfs.txt b/Documentation/filesystems/sysfs.txt index 597f728e7b4..07235caec22 100644 --- a/Documentation/filesystems/sysfs.txt +++ b/Documentation/filesystems/sysfs.txt @@ -4,7 +4,7 @@ sysfs - _The_ filesystem for exporting kernel objects. Patrick Mochel <mochel@osdl.org> Mike Murphy <mamurph@cs.clemson.edu> -Revised: 15 July 2010 +Revised: 16 August 2011 Original: 10 January 2003 @@ -370,3 +370,11 @@ int driver_create_file(struct device_driver *, const struct driver_attribute *); void driver_remove_file(struct device_driver *, const struct driver_attribute *); +Documentation +~~~~~~~~~~~~~ + +The sysfs directory structure and the attributes in each directory define an +ABI between the kernel and user space. As for any ABI, it is important that +this ABI is stable and properly documented. All new sysfs attributes must be +documented in Documentation/ABI. See also Documentation/ABI/README for more +information. diff --git a/Documentation/filesystems/vfs.txt b/Documentation/filesystems/vfs.txt index 52d8fb81cff..43cbd082172 100644 --- a/Documentation/filesystems/vfs.txt +++ b/Documentation/filesystems/vfs.txt @@ -1053,9 +1053,6 @@ manipulate dentries: and the dentry is returned. The caller must use dput() to free the dentry when it finishes using it. -For further information on dentry locking, please refer to the document -Documentation/filesystems/dentry-locking.txt. - Mount Options ============= diff --git a/Documentation/frv/booting.txt b/Documentation/frv/booting.txt index 37c4d84a0e5..9bdf4b46e74 100644 --- a/Documentation/frv/booting.txt +++ b/Documentation/frv/booting.txt @@ -180,9 +180,3 @@ separated by spaces: This tells the kernel what program to run initially. By default this is /sbin/init, but /sbin/sash or /bin/sh are common alternatives. - - (*) vdc=... - - This option configures the MB93493 companion chip visual display - driver. Please see Documentation/frv/mb93493/vdc.txt for more - information. diff --git a/Documentation/input/input.txt b/Documentation/input/input.txt index b93c08442e3..b3d6787b4fb 100644 --- a/Documentation/input/input.txt +++ b/Documentation/input/input.txt @@ -111,7 +111,7 @@ LCDs and many other purposes. The monitor and speaker controls should be easy to add to the hid/input interface, but for the UPSs and LCDs it doesn't make much sense. For this, -the hiddev interface was designed. See Documentation/usb/hiddev.txt +the hiddev interface was designed. See Documentation/hid/hiddev.txt for more information about it. The usage of the usbhid module is very simple, it takes no parameters, diff --git a/Documentation/kernel-docs.txt b/Documentation/kernel-docs.txt index 0e0734b509d..eda1eb1451a 100644 --- a/Documentation/kernel-docs.txt +++ b/Documentation/kernel-docs.txt @@ -300,7 +300,7 @@ * Title: "The Kernel Hacking HOWTO" Author: Various Talented People, and Rusty. - Location: in kernel tree, Documentation/DocBook/kernel-hacking/ + Location: in kernel tree, Documentation/DocBook/kernel-hacking.tmpl (must be built as "make {htmldocs | psdocs | pdfdocs}) Keywords: HOWTO, kernel contexts, deadlock, locking, modules, symbols, return conventions. @@ -351,7 +351,7 @@ * Title: "Linux Kernel Locking HOWTO" Author: Various Talented People, and Rusty. - Location: in kernel tree, Documentation/DocBook/kernel-locking/ + Location: in kernel tree, Documentation/DocBook/kernel-locking.tmpl (must be built as "make {htmldocs | psdocs | pdfdocs}) Keywords: locks, locking, spinlock, semaphore, atomic, race condition, bottom halves, tasklets, softirqs. diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 831bde222bd..2af94a23a6a 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -49,6 +49,7 @@ parameter is applicable: EDD BIOS Enhanced Disk Drive Services (EDD) is enabled EFI EFI Partitioning (GPT) is enabled EIDE EIDE/ATAPI support is enabled. + EVM Extended Verification Module FB The frame buffer device is enabled. FTRACE Function tracing enabled. GCOV GCOV profiling is enabled. @@ -163,7 +164,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted. rsdt -- prefer RSDT over (default) XSDT copy_dsdt -- copy DSDT to memory - See also Documentation/power/pm.txt, pci=noacpi + See also Documentation/power/runtime_pm.txt, pci=noacpi acpi_rsdp= [ACPI,EFI,KEXEC] Pass the RSDP address to the kernel, mostly used @@ -319,7 +320,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted. amijoy.map= [HW,JOY] Amiga joystick support Map of devices attached to JOY0DAT and JOY1DAT Format: <a>,<b> - See also Documentation/kernel/input/joystick.txt + See also Documentation/input/joystick.txt analog.map= [HW,JOY] Analog joystick and gamepad support Specifies type or capabilities of an analog joystick @@ -408,7 +409,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted. bttv.radio= Most important insmod options are available as kernel args too. bttv.pll= See Documentation/video4linux/bttv/Insmod-options - bttv.tuner= and Documentation/video4linux/bttv/CARDLIST + bttv.tuner= bulk_remove=off [PPC] This parameter disables the use of the pSeries firmware feature for flushing multiple hpte entries @@ -724,7 +725,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted. elevator= [IOSCHED] Format: {"cfq" | "deadline" | "noop"} - See Documentation/block/as-iosched.txt and + See Documentation/block/cfq-iosched.txt and Documentation/block/deadline-iosched.txt for details. elfcorehdr= [IA-64,PPC,SH,X86] @@ -760,12 +761,17 @@ bytes respectively. Such letter suffixes can also be entirely omitted. This option is obsoleted by the "netdev=" option, which has equivalent usage. See its documentation for details. + evm= [EVM] + Format: { "fix" } + Permit 'security.evm' to be updated regardless of + current integrity status. + failslab= fail_page_alloc= fail_make_request=[KNL] General fault injection mechanism. Format: <interval>,<probability>,<space>,<times> - See also /Documentation/fault-injection/. + See also Documentation/fault-injection/. floppy= [HW] See Documentation/blockdev/floppy.txt. @@ -2382,7 +2388,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted. Format: <integer> sonypi.*= [HW] Sony Programmable I/O Control Device driver - See Documentation/sonypi.txt + See Documentation/laptops/sonypi.txt specialix= [HW,SERIAL] Specialix multi-serial port adapter See Documentation/serial/specialix.txt. @@ -2713,10 +2719,11 @@ bytes respectively. Such letter suffixes can also be entirely omitted. functions are at fixed addresses, they make nice targets for exploits that can control RIP. - emulate [default] Vsyscalls turn into traps and are - emulated reasonably safely. + emulate Vsyscalls turn into traps and are emulated + reasonably safely. - native Vsyscalls are native syscall instructions. + native [default] Vsyscalls are native syscall + instructions. This is a little bit faster than trapping and makes a few dynamic recompilers work better than they would in emulation mode. diff --git a/Documentation/laptops/thinkpad-acpi.txt b/Documentation/laptops/thinkpad-acpi.txt index 61815483efa..3ff0dad62d3 100644 --- a/Documentation/laptops/thinkpad-acpi.txt +++ b/Documentation/laptops/thinkpad-acpi.txt @@ -736,7 +736,7 @@ status as "unknown". The available commands are: sysfs notes: The ThinkLight sysfs interface is documented by the LED class -documentation, in Documentation/leds-class.txt. The ThinkLight LED name +documentation, in Documentation/leds/leds-class.txt. The ThinkLight LED name is "tpacpi::thinklight". Due to limitations in the sysfs LED class, if the status of the ThinkLight @@ -833,7 +833,7 @@ All of the above can be turned on and off and can be made to blink. sysfs notes: The ThinkPad LED sysfs interface is described in detail by the LED class -documentation, in Documentation/leds-class.txt. +documentation, in Documentation/leds/leds-class.txt. The LEDs are named (in LED ID order, from 0 to 12): "tpacpi::power", "tpacpi:orange:batt", "tpacpi:green:batt", diff --git a/Documentation/media-framework.txt b/Documentation/media-framework.txt index 669b5fb03a8..3a0f879533c 100644 --- a/Documentation/media-framework.txt +++ b/Documentation/media-framework.txt @@ -9,8 +9,8 @@ Introduction ------------ The media controller API is documented in DocBook format in -Documentation/DocBook/v4l/media-controller.xml. This document will focus on -the kernel-side implementation of the media framework. +Documentation/DocBook/media/v4l/media-controller.xml. This document will focus +on the kernel-side implementation of the media framework. Abstract media device model diff --git a/Documentation/memory-barriers.txt b/Documentation/memory-barriers.txt index f0d3a8026a5..2759f7c188f 100644 --- a/Documentation/memory-barriers.txt +++ b/Documentation/memory-barriers.txt @@ -438,7 +438,7 @@ There are certain things that the Linux kernel memory barriers do not guarantee: [*] For information on bus mastering DMA and coherency please read: Documentation/PCI/pci.txt - Documentation/PCI/PCI-DMA-mapping.txt + Documentation/DMA-API-HOWTO.txt Documentation/DMA-API.txt diff --git a/Documentation/networking/batman-adv.txt b/Documentation/networking/batman-adv.txt index 88d4afbdef9..c86d03f18a5 100644 --- a/Documentation/networking/batman-adv.txt +++ b/Documentation/networking/batman-adv.txt @@ -1,4 +1,4 @@ -[state: 17-04-2011] +[state: 21-08-2011] BATMAN-ADV ---------- @@ -68,9 +68,9 @@ All mesh wide settings can be found in batman's own interface folder: # ls /sys/class/net/bat0/mesh/ -# aggregated_ogms gw_bandwidth hop_penalty -# bonding gw_mode orig_interval -# fragmentation gw_sel_class vis_mode +# aggregated_ogms fragmentation gw_sel_class vis_mode +# ap_isolation gw_bandwidth hop_penalty +# bonding gw_mode orig_interval There is a special folder for debugging information: diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt index ca5cdcd0f0e..cb7f3148035 100644 --- a/Documentation/networking/ip-sysctl.txt +++ b/Documentation/networking/ip-sysctl.txt @@ -1045,6 +1045,11 @@ conf/interface/*: accept_ra - INTEGER Accept Router Advertisements; autoconfigure using them. + It also determines whether or not to transmit Router + Solicitations. If and only if the functional setting is to + accept Router Advertisements, Router Solicitations will be + transmitted. + Possible values are: 0 Do not accept Router Advertisements. 1 Accept Router Advertisements if forwarding is disabled. @@ -1115,14 +1120,14 @@ forwarding - INTEGER Possible values are: 0 Forwarding disabled 1 Forwarding enabled - 2 Forwarding enabled (Hybrid Mode) FALSE (0): By default, Host behaviour is assumed. This means: 1. IsRouter flag is not set in Neighbour Advertisements. - 2. Router Solicitations are being sent when necessary. + 2. If accept_ra is TRUE (default), transmit Router + Solicitations. 3. If accept_ra is TRUE (default), accept Router Advertisements (and do autoconfiguration). 4. If accept_redirects is TRUE (default), accept Redirects. @@ -1133,16 +1138,10 @@ forwarding - INTEGER This means exactly the reverse from the above: 1. IsRouter flag is set in Neighbour Advertisements. - 2. Router Solicitations are not sent. + 2. Router Solicitations are not sent unless accept_ra is 2. 3. Router Advertisements are ignored unless accept_ra is 2. 4. Redirects are ignored. - TRUE (2): - - Hybrid mode. Same behaviour as TRUE, except for: - - 2. Router Solicitations are being sent when necessary. - Default: 0 (disabled) if global forwarding is disabled (default), otherwise 1 (enabled). diff --git a/Documentation/networking/mac80211-injection.txt b/Documentation/networking/mac80211-injection.txt index b30e81ad530..3a930072b16 100644 --- a/Documentation/networking/mac80211-injection.txt +++ b/Documentation/networking/mac80211-injection.txt @@ -23,6 +23,10 @@ radiotap headers and used to control injection: IEEE80211_RADIOTAP_F_FRAG: frame will be fragmented if longer than the current fragmentation threshold. + * IEEE80211_RADIOTAP_TX_FLAGS + + IEEE80211_RADIOTAP_F_TX_NOACK: frame should be sent without waiting for + an ACK even if it is a unicast frame The injection code can also skip all other currently defined radiotap fields facilitating replay of captured radiotap headers directly. diff --git a/Documentation/networking/netdevices.txt b/Documentation/networking/netdevices.txt index 87b3d15f523..89358341682 100644 --- a/Documentation/networking/netdevices.txt +++ b/Documentation/networking/netdevices.txt @@ -73,7 +73,7 @@ dev->hard_start_xmit: has to lock by itself when needed. It is recommended to use a try lock for this and return NETDEV_TX_LOCKED when the spin lock fails. The locking there should also properly protect against - set_multicast_list. Note that the use of NETIF_F_LLTX is deprecated. + set_rx_mode. Note that the use of NETIF_F_LLTX is deprecated. Don't use it for new drivers. Context: Process with BHs disabled or BH (timer), @@ -92,7 +92,7 @@ dev->tx_timeout: Context: BHs disabled Notes: netif_queue_stopped() is guaranteed true -dev->set_multicast_list: +dev->set_rx_mode: Synchronization: netif_tx_lock spinlock. Context: BHs disabled diff --git a/Documentation/networking/scaling.txt b/Documentation/networking/scaling.txt index fe67b5c79f0..a177de21d28 100644 --- a/Documentation/networking/scaling.txt +++ b/Documentation/networking/scaling.txt @@ -73,7 +73,7 @@ of queues to IRQs can be determined from /proc/interrupts. By default, an IRQ may be handled on any CPU. Because a non-negligible part of packet processing takes place in receive interrupt handling, it is advantageous to spread receive interrupts between CPUs. To manually adjust the IRQ -affinity of each interrupt see Documentation/IRQ-affinity. Some systems +affinity of each interrupt see Documentation/IRQ-affinity.txt. Some systems will be running irqbalance, a daemon that dynamically optimizes IRQ assignments and as a result may override any manual settings. diff --git a/Documentation/networking/stmmac.txt b/Documentation/networking/stmmac.txt index 57a24108b84..8d67980fabe 100644 --- a/Documentation/networking/stmmac.txt +++ b/Documentation/networking/stmmac.txt @@ -76,7 +76,16 @@ core. 4.5) DMA descriptors Driver handles both normal and enhanced descriptors. The latter has been only -tested on DWC Ether MAC 10/100/1000 Universal version 3.41a. +tested on DWC Ether MAC 10/100/1000 Universal version 3.41a and later. + +STMMAC supports DMA descriptor to operate both in dual buffer (RING) +and linked-list(CHAINED) mode. In RING each descriptor points to two +data buffer pointers whereas in CHAINED mode they point to only one data +buffer pointer. RING mode is the default. + +In CHAINED mode each descriptor will have pointer to next descriptor in +the list, hence creating the explicit chaining in the descriptor itself, +whereas such explicit chaining is not possible in RING mode. 4.6) Ethtool support Ethtool is supported. Driver statistics and internal errors can be taken using: @@ -235,7 +244,38 @@ reset procedure etc). o enh_desc.c: functions for handling enhanced descriptors o norm_desc.c: functions for handling normal descriptors -5) TODO: +5) Debug Information + +The driver exports many information i.e. internal statistics, +debug information, MAC and DMA registers etc. + +These can be read in several ways depending on the +type of the information actually needed. + +For example a user can be use the ethtool support +to get statistics: e.g. using: ethtool -S ethX +(that shows the Management counters (MMC) if supported) +or sees the MAC/DMA registers: e.g. using: ethtool -d ethX + +Compiling the Kernel with CONFIG_DEBUG_FS and enabling the +STMMAC_DEBUG_FS option the driver will export the following +debugfs entries: + +/sys/kernel/debug/stmmaceth/descriptors_status + To show the DMA TX/RX descriptor rings + +Developer can also use the "debug" module parameter to get +further debug information. + +In the end, there are other macros (that cannot be enabled +via menuconfig) to turn-on the RX/TX DMA debugging, +specific MAC core debug printk etc. Others to enable the +debug in the TX and RX processes. +All these are only useful during the developing stage +and should never enabled inside the code for general usage. +In fact, these can generate an huge amount of debug messages. + +6) TODO: o XGMAC is not supported. o Review the timer optimisation code to use an embedded device that will be available in new chip generations. diff --git a/Documentation/pinctrl.txt b/Documentation/pinctrl.txt new file mode 100644 index 00000000000..b04cb7d45a1 --- /dev/null +++ b/Documentation/pinctrl.txt @@ -0,0 +1,950 @@ +PINCTRL (PIN CONTROL) subsystem +This document outlines the pin control subsystem in Linux + +This subsystem deals with: + +- Enumerating and naming controllable pins + +- Multiplexing of pins, pads, fingers (etc) see below for details + +The intention is to also deal with: + +- Software-controlled biasing and driving mode specific pins, such as + pull-up/down, open drain etc, load capacitance configuration when controlled + by software, etc. + + +Top-level interface +=================== + +Definition of PIN CONTROLLER: + +- A pin controller is a piece of hardware, usually a set of registers, that + can control PINs. It may be able to multiplex, bias, set load capacitance, + set drive strength etc for individual pins or groups of pins. + +Definition of PIN: + +- PINS are equal to pads, fingers, balls or whatever packaging input or + output line you want to control and these are denoted by unsigned integers + in the range 0..maxpin. This numberspace is local to each PIN CONTROLLER, so + there may be several such number spaces in a system. This pin space may + be sparse - i.e. there may be gaps in the space with numbers where no + pin exists. + +When a PIN CONTROLLER is instatiated, it will register a descriptor to the +pin control framework, and this descriptor contains an array of pin descriptors +describing the pins handled by this specific pin controller. + +Here is an example of a PGA (Pin Grid Array) chip seen from underneath: + + A B C D E F G H + + 8 o o o o o o o o + + 7 o o o o o o o o + + 6 o o o o o o o o + + 5 o o o o o o o o + + 4 o o o o o o o o + + 3 o o o o o o o o + + 2 o o o o o o o o + + 1 o o o o o o o o + +To register a pin controller and name all the pins on this package we can do +this in our driver: + +#include <linux/pinctrl/pinctrl.h> + +const struct pinctrl_pin_desc __refdata foo_pins[] = { + PINCTRL_PIN(0, "A1"), + PINCTRL_PIN(1, "A2"), + PINCTRL_PIN(2, "A3"), + ... + PINCTRL_PIN(61, "H6"), + PINCTRL_PIN(62, "H7"), + PINCTRL_PIN(63, "H8"), +}; + +static struct pinctrl_desc foo_desc = { + .name = "foo", + .pins = foo_pins, + .npins = ARRAY_SIZE(foo_pins), + .maxpin = 63, + .owner = THIS_MODULE, +}; + +int __init foo_probe(void) +{ + struct pinctrl_dev *pctl; + + pctl = pinctrl_register(&foo_desc, <PARENT>, NULL); + if (IS_ERR(pctl)) + pr_err("could not register foo pin driver\n"); +} + +Pins usually have fancier names than this. You can find these in the dataheet +for your chip. Notice that the core pinctrl.h file provides a fancy macro +called PINCTRL_PIN() to create the struct entries. As you can see I enumerated +the pins from 0 in the upper left corner to 63 in the lower right corner, +this enumeration was arbitrarily chosen, in practice you need to think +through your numbering system so that it matches the layout of registers +and such things in your driver, or the code may become complicated. You must +also consider matching of offsets to the GPIO ranges that may be handled by +the pin controller. + +For a padring with 467 pads, as opposed to actual pins, I used an enumeration +like this, walking around the edge of the chip, which seems to be industry +standard too (all these pads had names, too): + + + 0 ..... 104 + 466 105 + . . + . . + 358 224 + 357 .... 225 + + +Pin groups +========== + +Many controllers need to deal with groups of pins, so the pin controller +subsystem has a mechanism for enumerating groups of pins and retrieving the +actual enumerated pins that are part of a certain group. + +For example, say that we have a group of pins dealing with an SPI interface +on { 0, 8, 16, 24 }, and a group of pins dealing with an I2C interface on pins +on { 24, 25 }. + +These two groups are presented to the pin control subsystem by implementing +some generic pinctrl_ops like this: + +#include <linux/pinctrl/pinctrl.h> + +struct foo_group { + const char *name; + const unsigned int *pins; + const unsigned num_pins; +}; + +static unsigned int spi0_pins[] = { 0, 8, 16, 24 }; +static unsigned int i2c0_pins[] = { 24, 25 }; + +static const struct foo_group foo_groups[] = { + { + .name = "spi0_grp", + .pins = spi0_pins, + .num_pins = ARRAY_SIZE(spi0_pins), + }, + { + .name = "i2c0_grp", + .pins = i2c0_pins, + .num_pins = ARRAY_SIZE(i2c0_pins), + }, +}; + + +static int foo_list_groups(struct pinctrl_dev *pctldev, unsigned selector) +{ + if (selector >= ARRAY_SIZE(foo_groups)) + return -EINVAL; + return 0; +} + +static const char *foo_get_group_name(struct pinctrl_dev *pctldev, + unsigned selector) +{ + return foo_groups[selector].name; +} + +static int foo_get_group_pins(struct pinctrl_dev *pctldev, unsigned selector, + unsigned ** const pins, + unsigned * const num_pins) +{ + *pins = (unsigned *) foo_groups[selector].pins; + *num_pins = foo_groups[selector].num_pins; + return 0; +} + +static struct pinctrl_ops foo_pctrl_ops = { + .list_groups = foo_list_groups, + .get_group_name = foo_get_group_name, + .get_group_pins = foo_get_group_pins, +}; + + +static struct pinctrl_desc foo_desc = { + ... + .pctlops = &foo_pctrl_ops, +}; + +The pin control subsystem will call the .list_groups() function repeatedly +beginning on 0 until it returns non-zero to determine legal selectors, then +it will call the other functions to retrieve the name and pins of the group. +Maintaining the data structure of the groups is up to the driver, this is +just a simple example - in practice you may need more entries in your group +structure, for example specific register ranges associated with each group +and so on. + + +Interaction with the GPIO subsystem +=================================== + +The GPIO drivers may want to perform operations of various types on the same +physical pins that are also registered as pin controller pins. + +Since the pin controller subsystem have its pinspace local to the pin +controller we need a mapping so that the pin control subsystem can figure out +which pin controller handles control of a certain GPIO pin. Since a single +pin controller may be muxing several GPIO ranges (typically SoCs that have +one set of pins but internally several GPIO silicon blocks, each modeled as +a struct gpio_chip) any number of GPIO ranges can be added to a pin controller +instance like this: + +struct gpio_chip chip_a; +struct gpio_chip chip_b; + +static struct pinctrl_gpio_range gpio_range_a = { + .name = "chip a", + .id = 0, + .base = 32, + .npins = 16, + .gc = &chip_a; +}; + +static struct pinctrl_gpio_range gpio_range_a = { + .name = "chip b", + .id = 0, + .base = 48, + .npins = 8, + .gc = &chip_b; +}; + + +{ + struct pinctrl_dev *pctl; + ... + pinctrl_add_gpio_range(pctl, &gpio_range_a); + pinctrl_add_gpio_range(pctl, &gpio_range_b); +} + +So this complex system has one pin controller handling two different +GPIO chips. Chip a has 16 pins and chip b has 8 pins. They are mapped in +the global GPIO pin space at: + +chip a: [32 .. 47] +chip b: [48 .. 55] + +When GPIO-specific functions in the pin control subsystem are called, these +ranges will be used to look up the apropriate pin controller by inspecting +and matching the pin to the pin ranges across all controllers. When a +pin controller handling the matching range is found, GPIO-specific functions +will be called on that specific pin controller. + +For all functionalities dealing with pin biasing, pin muxing etc, the pin +controller subsystem will subtract the range's .base offset from the passed +in gpio pin number, and pass that on to the pin control driver, so the driver +will get an offset into its handled number range. Further it is also passed +the range ID value, so that the pin controller knows which range it should +deal with. + +For example: if a user issues pinctrl_gpio_set_foo(50), the pin control +subsystem will find that the second range on this pin controller matches, +subtract the base 48 and call the +pinctrl_driver_gpio_set_foo(pinctrl, range, 2) where the latter function has +this signature: + +int pinctrl_driver_gpio_set_foo(struct pinctrl_dev *pctldev, + struct pinctrl_gpio_range *rangeid, + unsigned offset); + +Now the driver knows that we want to do some GPIO-specific operation on the +second GPIO range handled by "chip b", at offset 2 in that specific range. + +(If the GPIO subsystem is ever refactored to use a local per-GPIO controller +pin space, this mapping will need to be augmented accordingly.) + + +PINMUX interfaces +================= + +These calls use the pinmux_* naming prefix. No other calls should use that +prefix. + + +What is pinmuxing? +================== + +PINMUX, also known as padmux, ballmux, alternate functions or mission modes +is a way for chip vendors producing some kind of electrical packages to use +a certain physical pin (ball, pad, finger, etc) for multiple mutually exclusive +functions, depending on the application. By "application" in this context +we usually mean a way of soldering or wiring the package into an electronic +system, even though the framework makes it possible to also change the function +at runtime. + +Here is an example of a PGA (Pin Grid Array) chip seen from underneath: + + A B C D E F G H + +---+ + 8 | o | o o o o o o o + | | + 7 | o | o o o o o o o + | | + 6 | o | o o o o o o o + +---+---+ + 5 | o | o | o o o o o o + +---+---+ +---+ + 4 o o o o o o | o | o + | | + 3 o o o o o o | o | o + | | + 2 o o o o o o | o | o + +-------+-------+-------+---+---+ + 1 | o o | o o | o o | o | o | + +-------+-------+-------+---+---+ + +This is not tetris. The game to think of is chess. Not all PGA/BGA packages +are chessboard-like, big ones have "holes" in some arrangement according to +different design patterns, but we're using this as a simple example. Of the +pins you see some will be taken by things like a few VCC and GND to feed power +to the chip, and quite a few will be taken by large ports like an external +memory interface. The remaining pins will often be subject to pin multiplexing. + +The example 8x8 PGA package above will have pin numbers 0 thru 63 assigned to +its physical pins. It will name the pins { A1, A2, A3 ... H6, H7, H8 } using +pinctrl_register_pins() and a suitable data set as shown earlier. + +In this 8x8 BGA package the pins { A8, A7, A6, A5 } can be used as an SPI port +(these are four pins: CLK, RXD, TXD, FRM). In that case, pin B5 can be used as +some general-purpose GPIO pin. However, in another setting, pins { A5, B5 } can +be used as an I2C port (these are just two pins: SCL, SDA). Needless to say, +we cannot use the SPI port and I2C port at the same time. However in the inside +of the package the silicon performing the SPI logic can alternatively be routed +out on pins { G4, G3, G2, G1 }. + +On the botton row at { A1, B1, C1, D1, E1, F1, G1, H1 } we have something +special - it's an external MMC bus that can be 2, 4 or 8 bits wide, and it will +consume 2, 4 or 8 pins respectively, so either { A1, B1 } are taken or +{ A1, B1, C1, D1 } or all of them. If we use all 8 bits, we cannot use the SPI +port on pins { G4, G3, G2, G1 } of course. + +This way the silicon blocks present inside the chip can be multiplexed "muxed" +out on different pin ranges. Often contemporary SoC (systems on chip) will +contain several I2C, SPI, SDIO/MMC, etc silicon blocks that can be routed to +different pins by pinmux settings. + +Since general-purpose I/O pins (GPIO) are typically always in shortage, it is +common to be able to use almost any pin as a GPIO pin if it is not currently +in use by some other I/O port. + + +Pinmux conventions +================== + +The purpose of the pinmux functionality in the pin controller subsystem is to +abstract and provide pinmux settings to the devices you choose to instantiate +in your machine configuration. It is inspired by the clk, GPIO and regulator +subsystems, so devices will request their mux setting, but it's also possible +to request a single pin for e.g. GPIO. + +Definitions: + +- FUNCTIONS can be switched in and out by a driver residing with the pin + control subsystem in the drivers/pinctrl/* directory of the kernel. The + pin control driver knows the possible functions. In the example above you can + identify three pinmux functions, one for spi, one for i2c and one for mmc. + +- FUNCTIONS are assumed to be enumerable from zero in a one-dimensional array. + In this case the array could be something like: { spi0, i2c0, mmc0 } + for the three available functions. + +- FUNCTIONS have PIN GROUPS as defined on the generic level - so a certain + function is *always* associated with a certain set of pin groups, could + be just a single one, but could also be many. In the example above the + function i2c is associated with the pins { A5, B5 }, enumerated as + { 24, 25 } in the controller pin space. + + The Function spi is associated with pin groups { A8, A7, A6, A5 } + and { G4, G3, G2, G1 }, which are enumerated as { 0, 8, 16, 24 } and + { 38, 46, 54, 62 } respectively. + + Group names must be unique per pin controller, no two groups on the same + controller may have the same name. + +- The combination of a FUNCTION and a PIN GROUP determine a certain function + for a certain set of pins. The knowledge of the functions and pin groups + and their machine-specific particulars are kept inside the pinmux driver, + from the outside only the enumerators are known, and the driver core can: + + - Request the name of a function with a certain selector (>= 0) + - A list of groups associated with a certain function + - Request that a certain group in that list to be activated for a certain + function + + As already described above, pin groups are in turn self-descriptive, so + the core will retrieve the actual pin range in a certain group from the + driver. + +- FUNCTIONS and GROUPS on a certain PIN CONTROLLER are MAPPED to a certain + device by the board file, device tree or similar machine setup configuration + mechanism, similar to how regulators are connected to devices, usually by + name. Defining a pin controller, function and group thus uniquely identify + the set of pins to be used by a certain device. (If only one possible group + of pins is available for the function, no group name need to be supplied - + the core will simply select the first and only group available.) + + In the example case we can define that this particular machine shall + use device spi0 with pinmux function fspi0 group gspi0 and i2c0 on function + fi2c0 group gi2c0, on the primary pin controller, we get mappings + like these: + + { + {"map-spi0", spi0, pinctrl0, fspi0, gspi0}, + {"map-i2c0", i2c0, pinctrl0, fi2c0, gi2c0} + } + + Every map must be assigned a symbolic name, pin controller and function. + The group is not compulsory - if it is omitted the first group presented by + the driver as applicable for the function will be selected, which is + useful for simple cases. + + The device name is present in map entries tied to specific devices. Maps + without device names are referred to as SYSTEM pinmuxes, such as can be taken + by the machine implementation on boot and not tied to any specific device. + + It is possible to map several groups to the same combination of device, + pin controller and function. This is for cases where a certain function on + a certain pin controller may use different sets of pins in different + configurations. + +- PINS for a certain FUNCTION using a certain PIN GROUP on a certain + PIN CONTROLLER are provided on a first-come first-serve basis, so if some + other device mux setting or GPIO pin request has already taken your physical + pin, you will be denied the use of it. To get (activate) a new setting, the + old one has to be put (deactivated) first. + +Sometimes the documentation and hardware registers will be oriented around +pads (or "fingers") rather than pins - these are the soldering surfaces on the +silicon inside the package, and may or may not match the actual number of +pins/balls underneath the capsule. Pick some enumeration that makes sense to +you. Define enumerators only for the pins you can control if that makes sense. + +Assumptions: + +We assume that the number possible function maps to pin groups is limited by +the hardware. I.e. we assume that there is no system where any function can be +mapped to any pin, like in a phone exchange. So the available pins groups for +a certain function will be limited to a few choices (say up to eight or so), +not hundreds or any amount of choices. This is the characteristic we have found +by inspecting available pinmux hardware, and a necessary assumption since we +expect pinmux drivers to present *all* possible function vs pin group mappings +to the subsystem. + + +Pinmux drivers +============== + +The pinmux core takes care of preventing conflicts on pins and calling +the pin controller driver to execute different settings. + +It is the responsibility of the pinmux driver to impose further restrictions +(say for example infer electronic limitations due to load etc) to determine +whether or not the requested function can actually be allowed, and in case it +is possible to perform the requested mux setting, poke the hardware so that +this happens. + +Pinmux drivers are required to supply a few callback functions, some are +optional. Usually the enable() and disable() functions are implemented, +writing values into some certain registers to activate a certain mux setting +for a certain pin. + +A simple driver for the above example will work by setting bits 0, 1, 2, 3 or 4 +into some register named MUX to select a certain function with a certain +group of pins would work something like this: + +#include <linux/pinctrl/pinctrl.h> +#include <linux/pinctrl/pinmux.h> + +struct foo_group { + const char *name; + const unsigned int *pins; + const unsigned num_pins; +}; + +static const unsigned spi0_0_pins[] = { 0, 8, 16, 24 }; +static const unsigned spi0_1_pins[] = { 38, 46, 54, 62 }; +static const unsigned i2c0_pins[] = { 24, 25 }; +static const unsigned mmc0_1_pins[] = { 56, 57 }; +static const unsigned mmc0_2_pins[] = { 58, 59 }; +static const unsigned mmc0_3_pins[] = { 60, 61, 62, 63 }; + +static const struct foo_group foo_groups[] = { + { + .name = "spi0_0_grp", + .pins = spi0_0_pins, + .num_pins = ARRAY_SIZE(spi0_0_pins), + }, + { + .name = "spi0_1_grp", + .pins = spi0_1_pins, + .num_pins = ARRAY_SIZE(spi0_1_pins), + }, + { + .name = "i2c0_grp", + .pins = i2c0_pins, + .num_pins = ARRAY_SIZE(i2c0_pins), + }, + { + .name = "mmc0_1_grp", + .pins = mmc0_1_pins, + .num_pins = ARRAY_SIZE(mmc0_1_pins), + }, + { + .name = "mmc0_2_grp", + .pins = mmc0_2_pins, + .num_pins = ARRAY_SIZE(mmc0_2_pins), + }, + { + .name = "mmc0_3_grp", + .pins = mmc0_3_pins, + .num_pins = ARRAY_SIZE(mmc0_3_pins), + }, +}; + + +static int foo_list_groups(struct pinctrl_dev *pctldev, unsigned selector) +{ + if (selector >= ARRAY_SIZE(foo_groups)) + return -EINVAL; + return 0; +} + +static const char *foo_get_group_name(struct pinctrl_dev *pctldev, + unsigned selector) +{ + return foo_groups[selector].name; +} + +static int foo_get_group_pins(struct pinctrl_dev *pctldev, unsigned selector, + unsigned ** const pins, + unsigned * const num_pins) +{ + *pins = (unsigned *) foo_groups[selector].pins; + *num_pins = foo_groups[selector].num_pins; + return 0; +} + +static struct pinctrl_ops foo_pctrl_ops = { + .list_groups = foo_list_groups, + .get_group_name = foo_get_group_name, + .get_group_pins = foo_get_group_pins, +}; + +struct foo_pmx_func { + const char *name; + const char * const *groups; + const unsigned num_groups; +}; + +static const char * const spi0_groups[] = { "spi0_1_grp" }; +static const char * const i2c0_groups[] = { "i2c0_grp" }; +static const char * const mmc0_groups[] = { "mmc0_1_grp", "mmc0_2_grp", + "mmc0_3_grp" }; + +static const struct foo_pmx_func foo_functions[] = { + { + .name = "spi0", + .groups = spi0_groups, + .num_groups = ARRAY_SIZE(spi0_groups), + }, + { + .name = "i2c0", + .groups = i2c0_groups, + .num_groups = ARRAY_SIZE(i2c0_groups), + }, + { + .name = "mmc0", + .groups = mmc0_groups, + .num_groups = ARRAY_SIZE(mmc0_groups), + }, +}; + +int foo_list_funcs(struct pinctrl_dev *pctldev, unsigned selector) +{ + if (selector >= ARRAY_SIZE(foo_functions)) + return -EINVAL; + return 0; +} + +const char *foo_get_fname(struct pinctrl_dev *pctldev, unsigned selector) +{ + return myfuncs[selector].name; +} + +static int foo_get_groups(struct pinctrl_dev *pctldev, unsigned selector, + const char * const **groups, + unsigned * const num_groups) +{ + *groups = foo_functions[selector].groups; + *num_groups = foo_functions[selector].num_groups; + return 0; +} + +int foo_enable(struct pinctrl_dev *pctldev, unsigned selector, + unsigned group) +{ + u8 regbit = (1 << group); + + writeb((readb(MUX)|regbit), MUX) + return 0; +} + +int foo_disable(struct pinctrl_dev *pctldev, unsigned selector, + unsigned group) +{ + u8 regbit = (1 << group); + + writeb((readb(MUX) & ~(regbit)), MUX) + return 0; +} + +struct pinmux_ops foo_pmxops = { + .list_functions = foo_list_funcs, + .get_function_name = foo_get_fname, + .get_function_groups = foo_get_groups, + .enable = foo_enable, + .disable = foo_disable, +}; + +/* Pinmux operations are handled by some pin controller */ +static struct pinctrl_desc foo_desc = { + ... + .pctlops = &foo_pctrl_ops, + .pmxops = &foo_pmxops, +}; + +In the example activating muxing 0 and 1 at the same time setting bits +0 and 1, uses one pin in common so they would collide. + +The beauty of the pinmux subsystem is that since it keeps track of all +pins and who is using them, it will already have denied an impossible +request like that, so the driver does not need to worry about such +things - when it gets a selector passed in, the pinmux subsystem makes +sure no other device or GPIO assignment is already using the selected +pins. Thus bits 0 and 1 in the control register will never be set at the +same time. + +All the above functions are mandatory to implement for a pinmux driver. + + +Pinmux interaction with the GPIO subsystem +========================================== + +The function list could become long, especially if you can convert every +individual pin into a GPIO pin independent of any other pins, and then try +the approach to define every pin as a function. + +In this case, the function array would become 64 entries for each GPIO +setting and then the device functions. + +For this reason there is an additional function a pinmux driver can implement +to enable only GPIO on an individual pin: .gpio_request_enable(). The same +.free() function as for other functions is assumed to be usable also for +GPIO pins. + +This function will pass in the affected GPIO range identified by the pin +controller core, so you know which GPIO pins are being affected by the request +operation. + +Alternatively it is fully allowed to use named functions for each GPIO +pin, the pinmux_request_gpio() will attempt to obtain the function "gpioN" +where "N" is the global GPIO pin number if no special GPIO-handler is +registered. + + +Pinmux board/machine configuration +================================== + +Boards and machines define how a certain complete running system is put +together, including how GPIOs and devices are muxed, how regulators are +constrained and how the clock tree looks. Of course pinmux settings are also +part of this. + +A pinmux config for a machine looks pretty much like a simple regulator +configuration, so for the example array above we want to enable i2c and +spi on the second function mapping: + +#include <linux/pinctrl/machine.h> + +static struct pinmux_map pmx_mapping[] = { + { + .ctrl_dev_name = "pinctrl.0", + .function = "spi0", + .dev_name = "foo-spi.0", + }, + { + .ctrl_dev_name = "pinctrl.0", + .function = "i2c0", + .dev_name = "foo-i2c.0", + }, + { + .ctrl_dev_name = "pinctrl.0", + .function = "mmc0", + .dev_name = "foo-mmc.0", + }, +}; + +The dev_name here matches to the unique device name that can be used to look +up the device struct (just like with clockdev or regulators). The function name +must match a function provided by the pinmux driver handling this pin range. + +As you can see we may have several pin controllers on the system and thus +we need to specify which one of them that contain the functions we wish +to map. The map can also use struct device * directly, so there is no +inherent need to use strings to specify .dev_name or .ctrl_dev_name, these +are for the situation where you do not have a handle to the struct device *, +for example if they are not yet instantiated or cumbersome to obtain. + +You register this pinmux mapping to the pinmux subsystem by simply: + + ret = pinmux_register_mappings(&pmx_mapping, ARRAY_SIZE(pmx_mapping)); + +Since the above construct is pretty common there is a helper macro to make +it even more compact which assumes you want to use pinctrl.0 and position +0 for mapping, for example: + +static struct pinmux_map pmx_mapping[] = { + PINMUX_MAP_PRIMARY("I2CMAP", "i2c0", "foo-i2c.0"), +}; + + +Complex mappings +================ + +As it is possible to map a function to different groups of pins an optional +.group can be specified like this: + +... +{ + .name = "spi0-pos-A", + .ctrl_dev_name = "pinctrl.0", + .function = "spi0", + .group = "spi0_0_grp", + .dev_name = "foo-spi.0", +}, +{ + .name = "spi0-pos-B", + .ctrl_dev_name = "pinctrl.0", + .function = "spi0", + .group = "spi0_1_grp", + .dev_name = "foo-spi.0", +}, +... + +This example mapping is used to switch between two positions for spi0 at +runtime, as described further below under the heading "Runtime pinmuxing". + +Further it is possible to match several groups of pins to the same function +for a single device, say for example in the mmc0 example above, where you can +additively expand the mmc0 bus from 2 to 4 to 8 pins. If we want to use all +three groups for a total of 2+2+4 = 8 pins (for an 8-bit MMC bus as is the +case), we define a mapping like this: + +... +{ + .name "2bit" + .ctrl_dev_name = "pinctrl.0", + .function = "mmc0", + .group = "mmc0_0_grp", + .dev_name = "foo-mmc.0", +}, +{ + .name "4bit" + .ctrl_dev_name = "pinctrl.0", + .function = "mmc0", + .group = "mmc0_0_grp", + .dev_name = "foo-mmc.0", +}, +{ + .name "4bit" + .ctrl_dev_name = "pinctrl.0", + .function = "mmc0", + .group = "mmc0_1_grp", + .dev_name = "foo-mmc.0", +}, +{ + .name "8bit" + .ctrl_dev_name = "pinctrl.0", + .function = "mmc0", + .group = "mmc0_0_grp", + .dev_name = "foo-mmc.0", +}, +{ + .name "8bit" + .ctrl_dev_name = "pinctrl.0", + .function = "mmc0", + .group = "mmc0_1_grp", + .dev_name = "foo-mmc.0", +}, +{ + .name "8bit" + .ctrl_dev_name = "pinctrl.0", + .function = "mmc0", + .group = "mmc0_2_grp", + .dev_name = "foo-mmc.0", +}, +... + +The result of grabbing this mapping from the device with something like +this (see next paragraph): + + pmx = pinmux_get(&device, "8bit"); + +Will be that you activate all the three bottom records in the mapping at +once. Since they share the same name, pin controller device, funcion and +device, and since we allow multiple groups to match to a single device, they +all get selected, and they all get enabled and disable simultaneously by the +pinmux core. + + +Pinmux requests from drivers +============================ + +Generally it is discouraged to let individual drivers get and enable pinmuxes. +So if possible, handle the pinmuxes in platform code or some other place where +you have access to all the affected struct device * pointers. In some cases +where a driver needs to switch between different mux mappings at runtime +this is not possible. + +A driver may request a certain mux to be activated, usually just the default +mux like this: + +#include <linux/pinctrl/pinmux.h> + +struct foo_state { + struct pinmux *pmx; + ... +}; + +foo_probe() +{ + /* Allocate a state holder named "state" etc */ + struct pinmux pmx; + + pmx = pinmux_get(&device, NULL); + if IS_ERR(pmx) + return PTR_ERR(pmx); + pinmux_enable(pmx); + + state->pmx = pmx; +} + +foo_remove() +{ + pinmux_disable(state->pmx); + pinmux_put(state->pmx); +} + +If you want to grab a specific mux mapping and not just the first one found for +this device you can specify a specific mapping name, for example in the above +example the second i2c0 setting: pinmux_get(&device, "spi0-pos-B"); + +This get/enable/disable/put sequence can just as well be handled by bus drivers +if you don't want each and every driver to handle it and you know the +arrangement on your bus. + +The semantics of the get/enable respective disable/put is as follows: + +- pinmux_get() is called in process context to reserve the pins affected with + a certain mapping and set up the pinmux core and the driver. It will allocate + a struct from the kernel memory to hold the pinmux state. + +- pinmux_enable()/pinmux_disable() is quick and can be called from fastpath + (irq context) when you quickly want to set up/tear down the hardware muxing + when running a device driver. Usually it will just poke some values into a + register. + +- pinmux_disable() is called in process context to tear down the pin requests + and release the state holder struct for the mux setting. + +Usually the pinmux core handled the get/put pair and call out to the device +drivers bookkeeping operations, like checking available functions and the +associated pins, whereas the enable/disable pass on to the pin controller +driver which takes care of activating and/or deactivating the mux setting by +quickly poking some registers. + +The pins are allocated for your device when you issue the pinmux_get() call, +after this you should be able to see this in the debugfs listing of all pins. + + +System pinmux hogging +===================== + +A system pinmux map entry, i.e. a pinmux setting that does not have a device +associated with it, can be hogged by the core when the pin controller is +registered. This means that the core will attempt to call pinmux_get() and +pinmux_enable() on it immediately after the pin control device has been +registered. + +This is enabled by simply setting the .hog_on_boot field in the map to true, +like this: + +{ + .name "POWERMAP" + .ctrl_dev_name = "pinctrl.0", + .function = "power_func", + .hog_on_boot = true, +}, + +Since it may be common to request the core to hog a few always-applicable +mux settings on the primary pin controller, there is a convenience macro for +this: + +PINMUX_MAP_PRIMARY_SYS_HOG("POWERMAP", "power_func") + +This gives the exact same result as the above construction. + + +Runtime pinmuxing +================= + +It is possible to mux a certain function in and out at runtime, say to move +an SPI port from one set of pins to another set of pins. Say for example for +spi0 in the example above, we expose two different groups of pins for the same +function, but with different named in the mapping as described under +"Advanced mapping" above. So we have two mappings named "spi0-pos-A" and +"spi0-pos-B". + +This snippet first muxes the function in the pins defined by group A, enables +it, disables and releases it, and muxes it in on the pins defined by group B: + +foo_switch() +{ + struct pinmux pmx; + + /* Enable on position A */ + pmx = pinmux_get(&device, "spi0-pos-A"); + if IS_ERR(pmx) + return PTR_ERR(pmx); + pinmux_enable(pmx); + + /* This releases the pins again */ + pinmux_disable(pmx); + pinmux_put(pmx); + + /* Enable on position B */ + pmx = pinmux_get(&device, "spi0-pos-B"); + if IS_ERR(pmx) + return PTR_ERR(pmx); + pinmux_enable(pmx); + ... +} + +The above has to be done from process context. diff --git a/Documentation/power/basic-pm-debugging.txt b/Documentation/power/basic-pm-debugging.txt index 62eca080a71..40a4c65f380 100644 --- a/Documentation/power/basic-pm-debugging.txt +++ b/Documentation/power/basic-pm-debugging.txt @@ -173,7 +173,7 @@ kernel messages using the serial console. This may provide you with some information about the reasons of the suspend (resume) failure. Alternatively, it may be possible to use a FireWire port for debugging with firescope (ftp://ftp.firstfloor.org/pub/ak/firescope/). On x86 it is also possible to -use the PM_TRACE mechanism documented in Documentation/s2ram.txt . +use the PM_TRACE mechanism documented in Documentation/power/s2ram.txt . 2. Testing suspend to RAM (STR) diff --git a/Documentation/power/userland-swsusp.txt b/Documentation/power/userland-swsusp.txt index 1101bee4e82..0e870825c1b 100644 --- a/Documentation/power/userland-swsusp.txt +++ b/Documentation/power/userland-swsusp.txt @@ -77,7 +77,8 @@ SNAPSHOT_SET_SWAP_AREA - set the resume partition and the offset (in <PAGE_SIZE> resume_swap_area, as defined in kernel/power/suspend_ioctls.h, containing the resume device specification and the offset); for swap partitions the offset is always 0, but it is different from zero for - swap files (see Documentation/swsusp-and-swap-files.txt for details). + swap files (see Documentation/power/swsusp-and-swap-files.txt for + details). SNAPSHOT_PLATFORM_SUPPORT - enable/disable the hibernation platform support, depending on the argument value (enable, if the argument is nonzero) diff --git a/Documentation/rfkill.txt b/Documentation/rfkill.txt index 83668e5dd17..03c9d9299c6 100644 --- a/Documentation/rfkill.txt +++ b/Documentation/rfkill.txt @@ -117,5 +117,4 @@ The contents of these variables corresponds to the "name", "state" and "type" sysfs files explained above. -For further details consult Documentation/ABI/stable/dev-rfkill and -Documentation/ABI/stable/sysfs-class-rfkill. +For further details consult Documentation/ABI/stable/sysfs-class-rfkill. diff --git a/Documentation/scsi/aic7xxx_old.txt b/Documentation/scsi/aic7xxx_old.txt index 7bd210ab45a..ecfc474f36a 100644 --- a/Documentation/scsi/aic7xxx_old.txt +++ b/Documentation/scsi/aic7xxx_old.txt @@ -444,7 +444,7 @@ linux-1.1.x and fairly stable since linux-1.2.x, and are also in FreeBSD Kernel Compile options ------------------------------ The various kernel compile time options for this driver are now fairly - well documented in the file Documentation/Configure.help. In order to + well documented in the file drivers/scsi/Kconfig. In order to see this documentation, you need to use one of the advanced configuration programs (menuconfig and xconfig). If you are using the "make menuconfig" method of configuring your kernel, then you would simply highlight the diff --git a/Documentation/scsi/scsi_mid_low_api.txt b/Documentation/scsi/scsi_mid_low_api.txt index 5f17d29c59b..a340b18cd4e 100644 --- a/Documentation/scsi/scsi_mid_low_api.txt +++ b/Documentation/scsi/scsi_mid_low_api.txt @@ -55,11 +55,6 @@ or in the same directory as the C source code. For example to find a url about the USB mass storage driver see the /usr/src/linux/drivers/usb/storage directory. -The Linux kernel source Documentation/DocBook/scsidrivers.tmpl file -refers to this file. With the appropriate DocBook tool-set, this permits -users to generate html, ps and pdf renderings of information within this -file (e.g. the interface functions). - Driver structure ================ Traditionally an LLD for the SCSI subsystem has been at least two files in diff --git a/Documentation/security/keys-trusted-encrypted.txt b/Documentation/security/keys-trusted-encrypted.txt index 5f50ccabfc8..c9e4855ed3d 100644 --- a/Documentation/security/keys-trusted-encrypted.txt +++ b/Documentation/security/keys-trusted-encrypted.txt @@ -156,4 +156,5 @@ Load an encrypted key "evm" from saved blob: Other uses for trusted and encrypted keys, such as for disk and file encryption are anticipated. In particular the new format 'ecryptfs' has been defined in in order to use encrypted keys to mount an eCryptfs filesystem. More details -about the usage can be found in the file 'Documentation/keys-ecryptfs.txt'. +about the usage can be found in the file +'Documentation/security/keys-ecryptfs.txt'. diff --git a/Documentation/sound/oss/PAS16 b/Documentation/sound/oss/PAS16 index 951b3dce51b..3dca4b75988 100644 --- a/Documentation/sound/oss/PAS16 +++ b/Documentation/sound/oss/PAS16 @@ -60,8 +60,7 @@ With PAS16 you can use two audio device files at the same time. /dev/dsp (and The new stuff for 2.3.99 and later ============================================================================ -The following configuration options from Documentation/Configure.help -are relevant to configuring the PAS16: +The following configuration options are relevant to configuring the PAS16: Sound card support CONFIG_SOUND diff --git a/Documentation/spi/pxa2xx b/Documentation/spi/pxa2xx index 00511e08db7..3352f97430e 100644 --- a/Documentation/spi/pxa2xx +++ b/Documentation/spi/pxa2xx @@ -2,7 +2,7 @@ PXA2xx SPI on SSP driver HOWTO =================================================== This a mini howto on the pxa2xx_spi driver. The driver turns a PXA2xx synchronous serial port into a SPI master controller -(see Documentation/spi/spi_summary). The driver has the following features +(see Documentation/spi/spi-summary). The driver has the following features - Support for any PXA2xx SSP - SSP PIO and SSP DMA data transfers. @@ -85,7 +85,7 @@ Declaring Slave Devices ----------------------- Typically each SPI slave (chip) is defined in the arch/.../mach-*/board-*.c using the "spi_board_info" structure found in "linux/spi/spi.h". See -"Documentation/spi/spi_summary" for additional information. +"Documentation/spi/spi-summary" for additional information. Each slave device attached to the PXA must provide slave specific configuration information via the structure "pxa2xx_spi_chip" found in diff --git a/Documentation/stable_kernel_rules.txt b/Documentation/stable_kernel_rules.txt index e213f45cf9d..21fd05c28e7 100644 --- a/Documentation/stable_kernel_rules.txt +++ b/Documentation/stable_kernel_rules.txt @@ -24,10 +24,10 @@ Rules on what kind of patches are accepted, and which ones are not, into the Procedure for submitting patches to the -stable tree: - Send the patch, after verifying that it follows the above rules, to - stable@kernel.org. You must note the upstream commit ID in the changelog - of your submission. + stable@vger.kernel.org. You must note the upstream commit ID in the + changelog of your submission. - To have the patch automatically included in the stable tree, add the tag - Cc: stable@kernel.org + Cc: stable@vger.kernel.org in the sign-off area. Once the patch is merged it will be applied to the stable tree without anything else needing to be done by the author or subsystem maintainer. @@ -35,10 +35,10 @@ Procedure for submitting patches to the -stable tree: cherry-picked than this can be specified in the following format in the sign-off area: - Cc: <stable@kernel.org> # .32.x: a1f84a3: sched: Check for idle - Cc: <stable@kernel.org> # .32.x: 1b9508f: sched: Rate-limit newidle - Cc: <stable@kernel.org> # .32.x: fd21073: sched: Fix affinity logic - Cc: <stable@kernel.org> # .32.x + Cc: <stable@vger.kernel.org> # .32.x: a1f84a3: sched: Check for idle + Cc: <stable@vger.kernel.org> # .32.x: 1b9508f: sched: Rate-limit newidle + Cc: <stable@vger.kernel.org> # .32.x: fd21073: sched: Fix affinity logic + Cc: <stable@vger.kernel.org> # .32.x Signed-off-by: Ingo Molnar <mingo@elte.hu> The tag sequence has the meaning of: diff --git a/Documentation/timers/highres.txt b/Documentation/timers/highres.txt index 21332233cef..e8789976e77 100644 --- a/Documentation/timers/highres.txt +++ b/Documentation/timers/highres.txt @@ -30,7 +30,7 @@ hrtimer base infrastructure --------------------------- The hrtimer base infrastructure was merged into the 2.6.16 kernel. Details of -the base implementation are covered in Documentation/hrtimers/hrtimer.txt. See +the base implementation are covered in Documentation/timers/hrtimers.txt. See also figure #2 (OLS slides p. 15) The main differences to the timer wheel, which holds the armed timer_list type diff --git a/Documentation/usb/dma.txt b/Documentation/usb/dma.txt index 84ef865237d..444651e70d9 100644 --- a/Documentation/usb/dma.txt +++ b/Documentation/usb/dma.txt @@ -7,7 +7,7 @@ API OVERVIEW The big picture is that USB drivers can continue to ignore most DMA issues, though they still must provide DMA-ready buffers (see -Documentation/PCI/PCI-DMA-mapping.txt). That's how they've worked through +Documentation/DMA-API-HOWTO.txt). That's how they've worked through the 2.4 (and earlier) kernels. OR: they can now be DMA-aware. @@ -57,7 +57,7 @@ and effects like cache-trashing can impose subtle penalties. force a consistent memory access ordering by using memory barriers. It's not using a streaming DMA mapping, so it's good for small transfers on systems where the I/O would otherwise thrash an IOMMU mapping. (See - Documentation/PCI/PCI-DMA-mapping.txt for definitions of "coherent" and + Documentation/DMA-API-HOWTO.txt for definitions of "coherent" and "streaming" DMA mappings.) Asking for 1/Nth of a page (as well as asking for N pages) is reasonably @@ -88,7 +88,7 @@ WORKING WITH EXISTING BUFFERS Existing buffers aren't usable for DMA without first being mapped into the DMA address space of the device. However, most buffers passed to your driver can safely be used with such DMA mapping. (See the first section -of Documentation/PCI/PCI-DMA-mapping.txt, titled "What memory is DMA-able?") +of Documentation/DMA-API-HOWTO.txt, titled "What memory is DMA-able?") - When you're using scatterlists, you can map everything at once. On some systems, this kicks in an IOMMU and turns the scatterlists into single diff --git a/Documentation/usb/dwc3.txt b/Documentation/usb/dwc3.txt new file mode 100644 index 00000000000..7b590edae14 --- /dev/null +++ b/Documentation/usb/dwc3.txt @@ -0,0 +1,45 @@ + + TODO +~~~~~~ +Please pick something while reading :) + +- Convert interrupt handler to per-ep-thread-irq + + As it turns out some DWC3-commands ~1ms to complete. Currently we spin + until the command completes which is bad. + + Implementation idea: + - dwc core implements a demultiplexing irq chip for interrupts per + endpoint. The interrupt numbers are allocated during probe and belong + to the device. If MSI provides per-endpoint interrupt this dummy + interrupt chip can be replaced with "real" interrupts. + - interrupts are requested / allocated on usb_ep_enable() and removed on + usb_ep_disable(). Worst case are 32 interrupts, the lower limit is two + for ep0/1. + - dwc3_send_gadget_ep_cmd() will sleep in wait_for_completion_timeout() + until the command completes. + - the interrupt handler is split into the following pieces: + - primary handler of the device + goes through every event and calls generic_handle_irq() for event + it. On return from generic_handle_irq() in acknowledges the event + counter so interrupt goes away (eventually). + + - threaded handler of the device + none + + - primary handler of the EP-interrupt + reads the event and tries to process it. Everything that requries + sleeping is handed over to the Thread. The event is saved in an + per-endpoint data-structure. + We probably have to pay attention not to process events once we + handed something to thread so we don't process event X prio Y + where X > Y. + + - threaded handler of the EP-interrupt + handles the remaining EP work which might sleep such as waiting + for command completion. + + Latency: + There should be no increase in latency since the interrupt-thread has a + high priority and will be run before an average task in user land + (except the user changed priorities). diff --git a/Documentation/usb/power-management.txt b/Documentation/usb/power-management.txt index e8662a5fbc5..12511c98cc4 100644 --- a/Documentation/usb/power-management.txt +++ b/Documentation/usb/power-management.txt @@ -487,3 +487,29 @@ succeed, it may still remain active and thus cause the system to resume as soon as the system suspend is complete. Or the remote wakeup may fail and get lost. Which outcome occurs depends on timing and on the hardware and firmware design. + + + xHCI hardware link PM + --------------------- + +xHCI host controller provides hardware link power management to usb2.0 +(xHCI 1.0 feature) and usb3.0 devices which support link PM. By +enabling hardware LPM, the host can automatically put the device into +lower power state(L1 for usb2.0 devices, or U1/U2 for usb3.0 devices), +which state device can enter and resume very quickly. + +The user interface for controlling USB2 hardware LPM is located in the +power/ subdirectory of each USB device's sysfs directory, that is, in +/sys/bus/usb/devices/.../power/ where "..." is the device's ID. The +relevant attribute files is usb2_hardware_lpm. + + power/usb2_hardware_lpm + + When a USB2 device which support LPM is plugged to a + xHCI host root hub which support software LPM, the + host will run a software LPM test for it; if the device + enters L1 state and resume successfully and the host + supports USB2 hardware LPM, this file will show up and + driver will enable hardware LPM for the device. You + can write y/Y/1 or n/N/0 to the file to enable/disable + USB2 hardware LPM manually. This is for test purpose mainly. diff --git a/Documentation/virtual/lguest/lguest.c b/Documentation/virtual/lguest/lguest.c index d928c134dee..c095d79cae7 100644 --- a/Documentation/virtual/lguest/lguest.c +++ b/Documentation/virtual/lguest/lguest.c @@ -436,7 +436,7 @@ static unsigned long load_bzimage(int fd) /* * Go back to the start of the file and read the header. It should be - * a Linux boot header (see Documentation/x86/i386/boot.txt) + * a Linux boot header (see Documentation/x86/boot.txt) */ lseek(fd, 0, SEEK_SET); read(fd, &boot, sizeof(boot)); diff --git a/Documentation/vm/numa b/Documentation/vm/numa index a200a386429..ade01274212 100644 --- a/Documentation/vm/numa +++ b/Documentation/vm/numa @@ -109,11 +109,11 @@ to improve NUMA locality using various CPU affinity command line interfaces, such as taskset(1) and numactl(1), and program interfaces such as sched_setaffinity(2). Further, one can modify the kernel's default local allocation behavior using Linux NUMA memory policy. -[see Documentation/vm/numa_memory_policy.] +[see Documentation/vm/numa_memory_policy.txt.] System administrators can restrict the CPUs and nodes' memories that a non- privileged user can specify in the scheduling or NUMA commands and functions -using control groups and CPUsets. [see Documentation/cgroups/CPUsets.txt] +using control groups and CPUsets. [see Documentation/cgroups/cpusets.txt] On architectures that do not hide memoryless nodes, Linux will include only zones [nodes] with memory in the zonelists. This means that for a memoryless diff --git a/Documentation/vm/slub.txt b/Documentation/vm/slub.txt index 07375e73981..f464f47bc60 100644 --- a/Documentation/vm/slub.txt +++ b/Documentation/vm/slub.txt @@ -17,7 +17,7 @@ data and perform operation on the slabs. By default slabinfo only lists slabs that have data in them. See "slabinfo -h" for more options when running the command. slabinfo can be compiled with -gcc -o slabinfo Documentation/vm/slabinfo.c +gcc -o slabinfo tools/slub/slabinfo.c Some of the modes of operation of slabinfo require that slub debugging be enabled on the command line. F.e. no tracking information will be diff --git a/Documentation/zh_CN/SubmitChecklist b/Documentation/zh_CN/SubmitChecklist deleted file mode 100644 index 4c741d6bc04..00000000000 --- a/Documentation/zh_CN/SubmitChecklist +++ /dev/null @@ -1,109 +0,0 @@ -Chinese translated version of Documentation/SubmitChecklist - -If you have any comment or update to the content, please contact the -original document maintainer directly. However, if you have a problem -communicating in English you can also ask the Chinese maintainer for -help. Contact the Chinese maintainer if this translation is outdated -or if there is a problem with the translation. - -Chinese maintainer: Harry Wei <harryxiyou@gmail.com> ---------------------------------------------------------------------- -Documentation/SubmitChecklist µÄÖÐÎÄ·Òë - -Èç¹ûÏëÆÀÂÛ»ò¸üб¾ÎĵÄÄÚÈÝ£¬ÇëÖ±½ÓÁªÏµÔÎĵµµÄά»¤Õß¡£Èç¹ûÄãʹÓÃÓ¢ÎÄ -½»Á÷ÓÐÀ§ÄѵĻ°£¬Ò²¿ÉÒÔÏòÖÐÎÄ°æά»¤ÕßÇóÖú¡£Èç¹û±¾·Òë¸üв»¼°Ê±»òÕß· -Òë´æÔÚÎÊÌ⣬ÇëÁªÏµÖÐÎÄ°æά»¤Õß¡£ - -ÖÐÎÄ°æά»¤Õߣº ¼ÖÍþÍþ Harry Wei <harryxiyou@gmail.com> -ÖÐÎÄ°æ·ÒëÕߣº ¼ÖÍþÍþ Harry Wei <harryxiyou@gmail.com> -ÖÐÎÄ°æУÒëÕߣº ¼ÖÍþÍþ Harry Wei <harryxiyou@gmail.com> - - -ÒÔÏÂΪÕýÎÄ ---------------------------------------------------------------------- -LinuxÄÚºËÌá½»Çåµ¥ -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - -ÕâÀïÓÐһЩÄں˿ª·¢ÕßÓ¦¸Ã×öµÄ»ù±¾ÊÂÇ飬Èç¹ûËûÃÇÏë¿´µ½×Ô¼ºµÄÄں˲¹¶¡Ìá½» -±»½ÓÊܵĸü¿ì¡£ - -ÕâЩ¶¼Êdz¬³öDocumentation/SubmittingPatchesÎĵµÀïËùÌṩµÄÒÔ¼°ÆäËû -¹ØÓÚÌá½»LinuxÄں˲¹¶¡µÄ˵Ã÷¡£ - -1£ºÈç¹ûÄãʹÓÃÁËÒ»¸ö¹¦ÄÜÄÇô¾Í#include¶¨Òå/ÉùÃ÷ÄǸö¹¦ÄܵÄÄǸöÎļþ¡£ - ²»ÒªÒÀ¿¿ÆäËû¼ä½ÓÒýÈ붨Òå/ÉùÃ÷ÄǸö¹¦ÄܵÄÍ·Îļþ¡£ - -2£º¹¹½¨¼ò½àÊÊÓûòÕ߸ü¸ÄCONFIGÑ¡Ïî =y£¬=m£¬»òÕß=n¡£ - ²»ÒªÓбàÒ뾯¸æ/´íÎó£¬ ²»ÒªÓÐÁ´½Ó¾¯¸æ/´íÎó¡£ - -2b£ºÍ¨¹ý allnoconfig, allmodconfig - -2c£ºµ±Ê¹Óà 0=builddir ³É¹¦µØ¹¹½¨ - -3£ºÍ¨¹ýʹÓñ¾µØ½»²æ±àÒ빤¾ß»òÕßÆäËûһЩ¹¹½¨²úËù£¬ÔÚ¶àCPU¿ò¼ÜÉϹ¹½¨¡£ - -4£ºppc64 ÊÇÒ»¸öºÜºÃµÄ¼ì²é½»²æ±àÒëµÄ¿ò¼Ü£¬ÒòΪËüÍùÍù°Ñ¡®unsigned long¡¯ - µ±64λֵÀ´Ê¹Óᣠ- -5£º°´ÕÕDocumentation/CodingStyleÎļþÀïµÄÏêϸÃèÊö£¬¼ì²éÄã²¹¶¡µÄÕûÌå·ç¸ñ¡£ - ʹÓò¹¶¡·ç¸ñ¼ì²éËöËéµÄÎ¥¹æ(scripts/checkpatch.pl)£¬ÉóºËÔ±ÓÅÏÈÌá½»¡£ - ÄãÓ¦¸Ãµ÷ÕûÒÅÁôÔÚÄã²¹¶¡ÖеÄËùÓÐÎ¥¹æ¡£ - -6£ºÈκθüлòÕ߸Ķ¯CONFIGÑ¡Ï²»ÄÜ´òÂÒÅäÖò˵¥¡£ - -7£ºËùÓеÄKconfigÑ¡Ïî¸üж¼ÒªÓÐ˵Ã÷ÎÄ×Ö¡£ - -8£ºÒѾÈÏÕæµØ×ܽáÁËÏà¹ØµÄKconfig×éºÏ¡£ÕâÊǺÜÄÑͨ¹ý²âÊÔ×öºÃµÄ--ÄÔÁ¦ÔÚÕâÀïϽµ¡£ - -9£º¼ì²é¾ßÓмò½àÐÔ¡£ - -10£ºÊ¹ÓÃ'make checkstack'ºÍ'make namespacecheck'¼ì²é£¬È»ºóÐÞ¸ÄËùÕÒµ½µÄÎÊÌâ¡£ - ×¢Ò⣺¶ÑÕ»¼ì²é²»»áÃ÷È·µØ³öÏÖÎÊÌ⣬µ«ÊÇÈκεÄÒ»¸öº¯ÊýÔÚ¶ÑÕ»ÉÏʹÓöàÓÚ512×Ö½Ú - ¶¼Òª×¼±¸Ð޸ġ£ - -11£º°üº¬kernel-docµ½È«¾ÖÄÚºËAPIsÎļþ¡££¨²»ÒªÇó¾²Ì¬µÄº¯Êý£¬µ«ÊÇ°üº¬Ò²ÎÞËùν¡££© - ʹÓÃ'make htmldocs'»òÕß'make mandocs'À´¼ì²ékernel-doc£¬È»ºóÐÞ¸ÄÈκΠ- ·¢ÏÖµÄÎÊÌâ¡£ - -12£ºÒѾͨ¹ýCONFIG_PREEMPT, CONFIG_DEBUG_PREEMPT, - CONFIG_DEBUG_SLAB, CONFIG_DEBUG_PAGEALLOC, CONFIG_DEBUG_MUTEXES, - CONFIG_DEBUG_SPINLOCK, CONFIG_DEBUG_ATOMIC_SLEEP²âÊÔ£¬²¢ÇÒͬʱ¶¼ - ʹÄÜ¡£ - -13£ºÒѾ¶¼¹¹½¨²¢ÇÒʹÓûòÕß²»Ê¹Óà CONFIG_SMP ºÍ CONFIG_PREEMPT²âÊÔÖ´ÐÐʱ¼ä¡£ - -14£ºÈç¹û²¹¶¡Ó°ÏìIO/Disk£¬µÈµÈ£ºÒѾͨ¹ýʹÓûòÕß²»Ê¹Óà CONFIG_LBDAF ²âÊÔ¡£ - -15£ºËùÓеÄcodepathsÒѾÐÐʹËùÓÐlockdepÆôÓù¦ÄÜ¡£ - -16£ºËùÓеÄ/proc¼Ç¼¸üж¼Òª×÷³ÉÎļþ·ÅÔÚDocumentation/Ŀ¼Ï¡£ - -17£ºËùÓеÄÄÚºËÆô¶¯²ÎÊý¸üж¼±»¼Ç¼µ½Documentation/kernel-parameters.txtÎļþÖС£ - -18£ºËùÓеÄÄ£¿é²ÎÊý¸üж¼ÓÃMODULE_PARM_DESC()¼Ç¼¡£ - -19£ºËùÓеÄÓû§¿Õ¼ä½Ó¿Ú¸üж¼±»¼Ç¼µ½Documentation/ABI/¡£²é¿´Documentation/ABI/README - ¿ÉÒÔ»ñµÃ¸ü¶àµÄÐÅÏ¢¡£¸Ä±äÓû§¿Õ¼ä½Ó¿ÚµÄ²¹¶¡Ó¦¸Ã±»Óʼþ³Ë͸ølinux-api@vger.kernel.org¡£ - -20£º¼ì²éËüÊDz»ÊǶ¼Í¨¹ý`make headers_check'¡£ - -21£ºÒѾͨ¹ýÖÁÉÙÒýÈëslabºÍpage-allocationʧ°Ü¼ì²é¡£²é¿´Documentation/fault-injection/¡£ - -22£ºÐ¼ÓÈëµÄÔ´ÂëÒѾͨ¹ý`gcc -W'£¨Ê¹ÓÃ"make EXTRA_CFLAGS=-W"£©±àÒë¡£ÕâÑù½«²úÉúºÜ¶à·³ÄÕ£¬ - µ«ÊǶÔÓÚÑ°ÕÒ©¶´ºÜÓÐÒæ´¦£¬ÀýÈç:"warning: comparison between signed and unsigned"¡£ - -23£ºµ±Ëü±»ºÏ²¢µ½-mm²¹¶¡¼¯ºóÔÙ²âÊÔ£¬ÓÃÀ´È·¶¨ËüÊÇ·ñ»¹ºÍ²¹¶¡¶ÓÁÐÖеÄÆäËû²¹¶¡Ò»Æð¹¤×÷ÒÔ¼°ÔÚVM£¬VFS - ºÍÆäËû×ÓϵͳÖи÷¸ö±ä»¯¡£ - -24£ºËùÓеÄÄÚ´æÆÁÕÏ{e.g., barrier(), rmb(), wmb()}ÐèÒªÔÚÔ´´úÂëÖеÄÒ»¸ö×¢ÊÍÀ´½âÊÍËûÃǶ¼ÊǸÉʲôµÄ - ÒÔ¼°ÔÒò¡£ - -25£ºÈç¹ûÓÐÈκÎÊäÈëÊä³ö¿ØÖƵIJ¹¶¡±»Ìí¼Ó£¬Ò²Òª¸üÐÂDocumentation/ioctl/ioctl-number.txt¡£ - -26£ºÈç¹ûÄãµÄ¸ü¸Ä´úÂëÒÀ¿¿»òÕßʹÓÃÈκεÄÄÚºËAPIs»òÕßÓëÏÂÃæµÄkconfig·ûºÅÓйØϵµÄ¹¦ÄÜ£¬Äã¾ÍÒª - ʹÓÃÏà¹ØµÄkconfig·ûºÅ¹Ø±Õ£¬ and/or =m£¨Èç¹ûÑ¡ÏîÌṩ£©[ÔÚͬһʱ¼ä²»ÊÇËùÓõĶ¼ÆôÓ㬽ö½ö¸÷¸ö»òÕß×ÔÓÉ - ×éºÏËûÃÇ]£º - - CONFIG_SMP, CONFIG_SYSFS, CONFIG_PROC_FS, CONFIG_INPUT, CONFIG_PCI, - CONFIG_BLOCK, CONFIG_PM, CONFIG_HOTPLUG, CONFIG_MAGIC_SYSRQ, - CONFIG_NET, CONFIG_INET=n (ºóÒ»¸öʹÓà CONFIG_NET=y) |